DLINK-AGENT-MIB
102 objects
The Structure of Common Management Information for the D-Link enterprise.
Imported Objects
| DLINK-ID-REC-MIB | AgentNotifyLevel dlink-common-mgmt |
| RFC1155-SMI | IpAddress |
| RFC1213-MIB | DisplayString |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | MacAddress RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.12.1 | IdentityagentGeneralMgmt | The Structure of Common Management Information for the D-Link enterprise. | ||
| 1.3.6.1.4.1.171.12.1.1 | NodeagentBasicInfo | |||
| 1.3.6.1.4.1.171.12.1.1.1 | ScalaragentMgmtProtocolCapability | read-only | current | The network management protocol(s) supported by this agent. |
| 1.3.6.1.4.1.171.12.1.1.2 | TableagentMibCapabilityTable | not-accessible | current | A list of MIB capability entries supported by this agent. |
| 1.3.6.1.4.1.171.12.1.1.2.1 | RowagentMibCapabilityEntry | not-accessible | current | A MIB capability entry contains objects describing a particular MIB supported by this agent. |
| 1.3.6.1.4.1.171.12.1.1.2.1.1 | ColumnagentMibCapabilityIndex | read-only | current | A list of agentMibCapabilityDescr entries. |
| 1.3.6.1.4.1.171.12.1.1.2.1.2 | ColumnagentMibCapabilityDescr | read-only | current | The name of the MIB supported by the agent. |
| 1.3.6.1.4.1.171.12.1.1.2.1.3 | ColumnagentMibCapabilityVersion | read-only | current | The version of the MIB specified in this entry. |
| 1.3.6.1.4.1.171.12.1.1.2.1.4 | ColumnagentMibCapabilityType | read-only | current | The type of the MIB specified in this entry. |
| 1.3.6.1.4.1.171.12.1.1.3 | ScalaragentStatusConsoleInUse | read-only | current | This indicates whether the console is currently in-use. |
| 1.3.6.1.4.1.171.12.1.1.4 | ScalaragentStatusSaveCfg | read-only | current | This indicates the status of the device configuration. other(1) - this entry is currently in use but the conditions under which it will remain so are different… |
| 1.3.6.1.4.1.171.12.1.1.5 | ScalaragentStatusFileTransfer | read-only | current | The status of the firmware download control. If the value is 'other', this means the firmware has not been updated since the device started up. |
| 1.3.6.1.4.1.171.12.1.1.6 | NodeagentCPUutilization | |||
| 1.3.6.1.4.1.171.12.1.1.6.1 | ScalaragentCPUutilizationIn5sec | read-only | current | The unit of time is 5 seconds. The value will be between 0% (idle) and 100% (very busy). |
| 1.3.6.1.4.1.171.12.1.1.6.2 | ScalaragentCPUutilizationIn1min | read-only | current | The unit of time is 1 minute. The value will be between 0% (idle) and 100% (very busy). |
| 1.3.6.1.4.1.171.12.1.1.6.3 | ScalaragentCPUutilizationIn5min | read-only | current | The unit of time is 5 minutes. The value will be between 0% (idle) and 100% (very busy). |
| 1.3.6.1.4.1.171.12.1.1.7 | TableagentPORTutilizationTable | not-accessible | current | The table specifies the port's utilization function. |
| 1.3.6.1.4.1.171.12.1.1.7.1 | RowagentPORTutilizationEntry | not-accessible | current | A list of information about the port's utilization function. |
| 1.3.6.1.4.1.171.12.1.1.7.1.1 | ColumnagentPORTutilizationProtIndex | read-only | current | This object indicates the module's port number. |
| 1.3.6.1.4.1.171.12.1.1.7.1.2 | ColumnagentPORTutilizationTX | read-only | current | The real-time gauges of transmitted frames on the specific port. |
| 1.3.6.1.4.1.171.12.1.1.7.1.3 | ColumnagentPORTutilizationRX | read-only | current | The real-time gauges of recieved frames on the specific port. |
| 1.3.6.1.4.1.171.12.1.1.7.1.4 | ColumnagentPORTutilizationUtil | read-only | current | The real-time percentage of the port statistics. |
| 1.3.6.1.4.1.171.12.1.1.9 | TableagentDRAMutilizationTable | not-accessible | current | Information about DRAM memory. |
| 1.3.6.1.4.1.171.12.1.1.9.1 | RowagentDRAMutilizationEntry | not-accessible | current | A list of information about DRAM memory. |
| 1.3.6.1.4.1.171.12.1.1.9.1.1 | ColumnagentDRAMutilizationUnitID | read-only | current | Specifies the unit ID. If the ID equals zero, it means the current device. |
| 1.3.6.1.4.1.171.12.1.1.9.1.2 | ColumnagentDRAMutilizationTotalDRAM | read-only | current | The size of the total DRAM memory. |
| 1.3.6.1.4.1.171.12.1.1.9.1.3 | ColumnagentDRAMutilizationUsedDRAM | read-only | current | The size of the used DRAM memory. |
| 1.3.6.1.4.1.171.12.1.1.9.1.4 | ColumnagentDRAMutilization | read-only | current | The percentage of used DRAM memory of the total DRAM memory available. The value will be between 0%(idle) and 100%(very busy). |
| 1.3.6.1.4.1.171.12.1.1.11 | ScalaragentStatusReset | read-only | current | This indicates the status of 'agentReset'. |
| 1.3.6.1.4.1.171.12.1.1.12 | ScalaragentSerialNumber | read-only | current | A text string containing the serial number of this device. |
| 1.3.6.1.4.1.171.12.1.2 | NodeagentBasicConfig | |||
| 1.3.6.1.4.1.171.12.1.2.1 | TableagentBscSwFileTable | not-accessible | current | A list of MIB basic config entries that support file update by this agent. |
| 1.3.6.1.4.1.171.12.1.2.1.1 | RowagentBscSwFileEntry | not-accessible | current | A basic configuration entry contains objects describing a particular MIB supported by this agent. |
| 1.3.6.1.4.1.171.12.1.2.1.1.1 | ColumnagentBscSwFileIndex | read-only | current | The table index for the file entry. |
| 1.3.6.1.4.1.171.12.1.2.1.1.2 | ColumnagentBscSwFileDscr | read-write | current | The description for the purpose of the software file in this entry. Note: For systems which do not support change of this object, setting values to this object… |
| 1.3.6.1.4.1.171.12.1.2.1.1.3 | ColumnagentBscSwFileAddr | read-write | current | The IP address where the file to be downloaded is located, or the IP address where the file will be uploaded to. |
| 1.3.6.1.4.1.171.12.1.2.1.1.4 | ColumnagentBscSwFileTransferType | read-write | current | The channel through which the file will be downloaded or uploaded. Note: For systems which do not support all channels, setting values to the unsupported chann… |
| 1.3.6.1.4.1.171.12.1.2.1.1.5 | ColumnagentBscSwFile | read-write | current | The name of the file to be downloaded from the TFTP server, or to be uploaded to. |
| 1.3.6.1.4.1.171.12.1.2.1.1.6 | ColumnagentBscSwFileLocateId | read-write | current | This object describes the type of the file. runtime-code(1), log-file(2), cfg-file(3) Note: For a system which does not support change of this object, setting … |
| 1.3.6.1.4.1.171.12.1.2.1.1.7 | ColumnagentBscSwFileLoadType | read-write | current | This object allows the user to select the download or upload function for the file. Note: For a system which does not support change of this object, setting a … |
| 1.3.6.1.4.1.171.12.1.2.1.1.8 | ColumnagentBscSwFileCtrl | read-write | current | This object allows the user to download runtime software. The setting will take effect when the system restarts. See Note (1) below Note: For systems which do … |
| 1.3.6.1.4.1.171.12.1.2.1.1.9 | ColumnagentBscSwFileBIncrement | read-write | current | The object indicates whether the previous configuration will be valid or not after downloading the configuration file. True: keep valid False: erase. |
| 1.3.6.1.4.1.171.12.1.2.1.1.10 | ColumnagentMultiImageCtrlID | read-write | current | The section ID of the firmware image. |
| 1.3.6.1.4.1.171.12.1.2.2 | ScalaragentFileTransfer | read-write | obsolete | This object will execute the download or upload action. If start(2), it will begin to download/upload, but no reset follows. If start-and-reset(3), then the re… |
| 1.3.6.1.4.1.171.12.1.2.3 | ScalaragentSystemReset | read-write | deprecated | This object indicates the agent system reset state. Setting this object to no-reset(4) has no effect. Setting this object to cold-start(2) or warm-start(3) wil… |
| 1.3.6.1.4.1.171.12.1.2.4 | ScalaragentRs232PortConfig | read-write | current | This object indicates the RS-232C mode when the device has restarted. |
| 1.3.6.1.4.1.171.12.1.2.5 | ScalaragentOutOfBandBaudRateConfig | read-write | obsolete | This object allows the user to the specify out-of-band baud rate. It will take effect when the system is restarted. Note: Because these functions will be limit… |
| 1.3.6.1.4.1.171.12.1.2.6 | ScalaragentSaveCfg | read-write | current | As the object is set to 'set(3)', the current device configuration will be saved into to NV-RAM. |
| 1.3.6.1.4.1.171.12.1.2.7 | TableswMultiImageInfoTable | not-accessible | current | |
| 1.3.6.1.4.1.171.12.1.2.7.1 | RowswMultiImageInfoEntry | not-accessible | current | A list of information about multiple image management. |
| 1.3.6.1.4.1.171.12.1.2.7.1.1 | ColumnswMultiImageInfoID | read-only | current | The section ID of the firmware image. |
| 1.3.6.1.4.1.171.12.1.2.7.1.2 | ColumnswMultiImageVersion | read-only | current | The record of the downloaded firmware version. |
| 1.3.6.1.4.1.171.12.1.2.7.1.3 | ColumnswMultiImageSize | read-only | current | The record of the downloaded firmware size. |
| 1.3.6.1.4.1.171.12.1.2.7.1.4 | ColumnswMultiImageUpdateTime | read-only | current | The record of the firmware updated time. |
| 1.3.6.1.4.1.171.12.1.2.7.1.5 | ColumnswMultiImageFrom | read-only | current | The record of the IP address of the TFTP server. |
| 1.3.6.1.4.1.171.12.1.2.7.1.6 | ColumnswMultiImageSendUser | read-only | current | The record of the user who downloaded the firmware. |
| 1.3.6.1.4.1.171.12.1.2.10 | NodeagentTrustHostMgmt | |||
| 1.3.6.1.4.1.171.12.1.2.10.1 | TableagentTrustHostTable | not-accessible | current | This table contains trusted host information. |
| 1.3.6.1.4.1.171.12.1.2.10.1.1 | RowagentTrustHostEntry | not-accessible | current | A list of information about trusted host. |
| 1.3.6.1.4.1.171.12.1.2.10.1.1.1 | ColumnagentTrustHostIndex | read-only | current | The index of the trusted host entry. |
| 1.3.6.1.4.1.171.12.1.2.10.1.1.2 | ColumnagentTrustHostIPAddress | read-create | current | Specifies the IP address of the trusted host. |
| 1.3.6.1.4.1.171.12.1.2.10.1.1.3 | ColumnagentTrustHostRowStatus | read-create | current | Indicates the status of this entry. When creating a trusted host entry, the IP address should be set, too. |
| 1.3.6.1.4.1.171.12.1.2.10.1.1.4 | ColumnagentTrustHostIPSubnetMask | read-create | current | Specifies the IP subnet mask of the trusted host. |
| 1.3.6.1.4.1.171.12.1.2.10.1.1.5 | ColumnagentTrustHostForSNMP | read-create | current | Specifies the trusted host for SNMP. |
| 1.3.6.1.4.1.171.12.1.2.10.1.1.6 | ColumnagentTrustHostForTELNET | read-create | current | Specifies the trusted host for TELNET. |
| 1.3.6.1.4.1.171.12.1.2.10.1.1.7 | ColumnagentTrustHostForSSH | read-create | current | Specifies the trusted host for SSH. |
| 1.3.6.1.4.1.171.12.1.2.10.1.1.8 | ColumnagentTrustHostForHTTP | read-create | current | Specifies the trusted host for HTTP. |
| 1.3.6.1.4.1.171.12.1.2.10.1.1.9 | ColumnagentTrustHostForHTTPS | read-create | current | Specifies the trusted host for HTTPS. |
| 1.3.6.1.4.1.171.12.1.2.10.2 | ScalaragentTrustHostDelAllState | read-write | current | Used to delete all trusted host entries. |
| 1.3.6.1.4.1.171.12.1.2.11 | NodeagentFDBMgmt | |||
| 1.3.6.1.4.1.171.12.1.2.11.1 | ScalaragentFDBClearAllState | read-write | current | Used to clear all FDB entries. |
| 1.3.6.1.4.1.171.12.1.2.12 | NodeagentARPMgmt | |||
| 1.3.6.1.4.1.171.12.1.2.12.1 | ScalaragentARPClearAllState | read-write | current | Used to clear all ARP entries. |
| 1.3.6.1.4.1.171.12.1.2.12.2 | NodeagentGratuitousARPMgmt | |||
| 1.3.6.1.4.1.171.12.1.2.12.2.1 | ScalaragentGratuitousARPSendIpifStatusUpState | read-write | current | It is used to enable/disable sending of gratuitous ARP request packets while IPIF interface come up. This is used to automatically announce the interface's IP … |
| 1.3.6.1.4.1.171.12.1.2.12.2.2 | ScalaragentGratuitousARPSendDupIpDetectedState | read-write | current | It is used to enable/disable sending of gratuitous ARP request packets while a duplicate IP is detected. By default, the state is enabled. The duplicate IP det… |
| 1.3.6.1.4.1.171.12.1.2.12.2.3 | ScalaragentGratuitousARPLearningState | read-write | current | It is used to enable/disable learning of an ARP entry in the ARP cache based on the received gratuitous ARP packet. If the switch receives a gratuitous ARP req… |
| 1.3.6.1.4.1.171.12.1.2.12.2.4 | TableagentGratuitousARPTable | not-accessible | current | Gratuitous ARP Table Information. |
| 1.3.6.1.4.1.171.12.1.2.12.2.4.1 | RowagentGratuitousARPEntry | not-accessible | current | A list of information from the Gratuitous ARP Table. |
| 1.3.6.1.4.1.171.12.1.2.12.2.4.1.1 | ColumnagentGratuitousARPInterfaceName | read-only | current | The name of the IP interface. |
| 1.3.6.1.4.1.171.12.1.2.12.2.4.1.2 | ColumnagentGratuitousARPPeriodicalSendInterval | read-write | current | It is used to configure the interval for the periodic sending of gratuitous ARP request packets. 0 means not send gratuitous ARP periodically. |
| 1.3.6.1.4.1.171.12.1.2.12.2.4.1.3 | ColumnagentGratuitousARPTrapState | read-write | current | It indicates the state of the gratuitous ARP trap. The switch can trap the IP conflict event to inform the administrator. By default, the trap is disabled. |
| 1.3.6.1.4.1.171.12.1.2.12.2.4.1.4 | ColumnagentGratuitousARPLogState | read-write | current | It indicates the state of the gratuitous Log trap. The switch can log the IP conflict event to inform the administrator. By default, the event log is enabled. |
| 1.3.6.1.4.1.171.12.1.2.19 | ScalaragentReboot | read-write | current | Used to restart the switch. |
| 1.3.6.1.4.1.171.12.1.2.20 | ScalaragentReset | read-write | current | Used to reset all switch parameters. none(1) : No action. This is the default value of this object. config(2): All parameters are reset to default settings, bu… |
| 1.3.6.1.4.1.171.12.1.2.22 | ScalaragentSnmpTrapState | read-write | current | This object indicates the state of snmp trap is enabled or disabled. |
| 1.3.6.1.4.1.171.12.1.3 | NodeagentIpProtoConfig | |||
| 1.3.6.1.4.1.171.12.1.3.1 | ScalaragentIpNumOfIf | read-only | current | The total number of IP interfaces supported by this agent. |
| 1.3.6.1.4.1.171.12.1.3.2 | ScalaragentIpTftpServerAddr | read-write | obsolete | The IP Address of the TFTP server. |
| 1.3.6.1.4.1.171.12.1.3.3 | ScalaragentIpGetIpFrom | read-write | current | This object indicates whether the agent get its system IP address from BOOTP/DHCP server at start up. |
| 1.3.6.1.4.1.171.12.1.3.4 | ScalaragentIpAutoconfig | read-write | current | |
| 1.3.6.1.4.1.171.12.1.4 | NodeagentNotify | |||
| 1.3.6.1.4.1.171.12.1.4.1 | NodeagentNotifMgmt | |||
| 1.3.6.1.4.1.171.12.1.4.1.1 | ScalarsystemTrapsSeverity | read-write | current | Indicates the level of system severity control. The system has a severity level control and each trap should be associated with a severity control. When a trap… |
| 1.3.6.1.4.1.171.12.1.4.1.2 | ScalarsystemLogsSeverity | read-write | current | Indicates the level of system severity control. The system has a severity level control and each log should be associated with a severity control. When a log e… |
| 1.3.6.1.4.1.171.12.1.4.2 | NodeagentNotifFirmware | |||
| 1.3.6.1.4.1.171.12.1.4.2.0 | NodeagentNotifyPrefix | |||
| 1.3.6.1.4.1.171.12.1.4.2.0.5 | NotificationagentGratuitousARPTrap | current | The trap is sent when there is an IP address conflict. | |
| 1.3.6.1.4.1.171.12.1.4.2.1 | NodenotificationBidings | |||
| 1.3.6.1.4.1.171.12.1.4.2.1.3 | ScalaragentGratuitousARPIpAddr | accessible-for-notify | current | Duplicate IP address with the switch. |
| 1.3.6.1.4.1.171.12.1.4.2.1.4 | ScalaragentGratuitousARPMacAddr | accessible-for-notify | current | The MAC address of the device which has the duplicate IP address. |
| 1.3.6.1.4.1.171.12.1.4.2.1.5 | ScalaragentGratuitousARPPortNumber | accessible-for-notify | current | It indicates the portNum with a string, For example, if the device is in standalone mode, and the port number is 23, the string should be 23. If the device is … |