DLINK-TIME-MIB
23 objects
DLink equipments absolute time.
Imported Objects
| DLINK-ID-REC-MIB | dlink-common-mgmt |
| SNMPv2-SMI | IpAddress MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DateAndTime DisplayString TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.12.10 | IdentityswDlinkTimeMIB | DLink equipments absolute time. | ||
| 1.3.6.1.4.1.171.12.10.1 | ScalarswTimeCapacity | read-only | current | A string of 8 bits, corresponding to indicates the time capacity supported in the system. If sntp bit(1) is 1 , indicate the SNTP is supported else if sntp bit… |
| 1.3.6.1.4.1.171.12.10.2 | ScalarswCurrentClock | read-write | current | The current local date and time for the system. Setting this object is equivalent to setting an automated clock and calendar. The value of the object will trac… |
| 1.3.6.1.4.1.171.12.10.3 | ScalarswClockLostOnReboot | read-only | current | Indication of whether the system can preserve knowledge of current date and time across a system reboot. A value of 'true' indicates the clock must be reset fr… |
| 1.3.6.1.4.1.171.12.10.10 | NodeswSystemTime | |||
| 1.3.6.1.4.1.171.12.10.10.1 | ScalarswSystemCurrentTime | read-only | current | the mandatory network time was got from the SNTP server |
| 1.3.6.1.4.1.171.12.10.10.2 | ScalarswSystemUpTime | read-only | current | The time (in second) since the network management portion of the system was last re-initialized. It is the same as sysUptime. |
| 1.3.6.1.4.1.171.12.10.10.3 | ScalarswSystemBootTime | read-only | current | The boot time of the switch is equal to subtract systemUpTime from swSNTPCurrentTime |
| 1.3.6.1.4.1.171.12.10.10.4 | ScalarswSystemTimeZone | read-write | current | Local time offset in minutes from GMT. |
| 1.3.6.1.4.1.171.12.10.11 | NodeswSNTP | |||
| 1.3.6.1.4.1.171.12.10.11.1 | ScalarswSNTPState | read-write | current | This object enable/disable the SNTP function. |
| 1.3.6.1.4.1.171.12.10.11.2 | ScalarswSNTPTimeSource | read-only | current | the SNTP server status for time source changing |
| 1.3.6.1.4.1.171.12.10.11.3 | ScalarswSNTPServer1IPAddr | read-write | current | Configure the SNTP server #1 IP address |
| 1.3.6.1.4.1.171.12.10.11.4 | ScalarswSNTPServer2IPAddr | read-write | current | Configure the SNTP server #2 IP address |
| 1.3.6.1.4.1.171.12.10.11.5 | ScalarswSNTPPollInterval | read-write | current | Update time in seconds from SNTP server. |
| 1.3.6.1.4.1.171.12.10.12 | NodeswSummerTime | |||
| 1.3.6.1.4.1.171.12.10.12.1 | ScalarswSummerTimeStatus | read-write | current | An indication of whether the summertime feature is disabled or enabled in reprating or annual mode on this device. When this object is set to repeating,then th… |
| 1.3.6.1.4.1.171.12.10.12.2 | ScalarswSummerTimeOffset | read-write | current | The value of this object indicates number of minutes to add or to subtract during summertime. This object is not instantiated when swSummerTimeStatus object is… |
| 1.3.6.1.4.1.171.12.10.12.3 | ScalarswRepeatSummerTimeStart | read-write | current | Indicates summertime starts at this time every year. octets contents range 1 week 1..4,00 last = 00 2-3 day 1..7 where sunday = 1 saturday = 7 4 month 1..12 wh… |
| 1.3.6.1.4.1.171.12.10.12.4 | ScalarswRepeatSummerTimeEnd | read-write | current | Indicates summertime ends at this time every year. octets contents range 1 week 1..5,ff where ff = last 2-3 day 1..7 where sunday = 1 saturday = 7 4 month 1..1… |
| 1.3.6.1.4.1.171.12.10.12.5 | ScalarswAnnualSummerTimeStart | read-write | current | Indicates summertime starts at this time every year. octets contents range 1 monthDay 1..31, 2 month 1..12 where january = 1 december = 12 3 hour 0..23 4 min 0… |
| 1.3.6.1.4.1.171.12.10.12.6 | ScalarswAnnualSummerTimeEnd | read-write | current | Indicates summertime ends at this time every year. octets contents range 1 monthDay 1..31, 2 month 1..12 where january = 1 december = 12 3 hour 0..23 4 min 0..… |
| 1.3.6.1.4.1.171.12.10.13 | NodeswTimeNotifPrefix |