DLINK-WLAN-MIB
108 objects
The MIB module for D-Link 802.11 series product. This module derived from IEEE ieee802dot11
Imported Objects
| RFC-1212 | -- OBJECT-TYPE Counter32 Integer32 |
| RFC1155-SMI | enterprises IpAddress mgmt |
| RFC1213-MIB | ifIndex |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString MacAddress RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171 | Nodedlink | |||
| 1.3.6.1.4.1.171.1 | IdentitydlkEnterpriseAP | The MIB module for D-Link 802.11 series product. This module derived from IEEE ieee802dot11 | ||
| 1.3.6.1.4.1.171.1.1 | NodedlkEnterpriseAPsys | |||
| 1.3.6.1.4.1.171.1.1.1 | ScalarenterpriseAPSysConfigSave | read-write | current | User must manually SET this OID in order to save the change(s) made through SNMP to main configuration. |
| 1.3.6.1.4.1.171.1.1.2 | ScalarenterpriseAPSysReboot | read-write | current | This attribute is to reboot the enterprise AP system. Doesn't save the changes that had been made. |
| 1.3.6.1.4.1.171.1.1.3 | ScalarenterpriseAPSysConfigApply | read-write | current | This attribute is equivalent of setting enterpriseAPSysConfigSave then enterpriseAPSysConfigApply. |
| 1.3.6.1.4.1.171.1.2 | NodedlkEnterpriseAPlan | |||
| 1.3.6.1.4.1.171.1.3 | Nodedlk80211bPlusDot11 | |||
| 1.3.6.1.4.1.171.1.3.1 | Nodedot11smt | |||
| 1.3.6.1.4.1.171.1.3.1.1 | Nodedot11StationConfigEntry | |||
| 1.3.6.1.4.1.171.1.3.1.1.1 | Scalardot11StationID | read-only | deprecated | The purpose of dot11StationID is to allow a manager to identify a station for its own purposes. This attribute provides for that eventuality while keeping the … |
| 1.3.6.1.4.1.171.1.3.1.1.2 | Scalardot11PrivacyOptionImplemented | read-only | current | This attribute, when true, shall indicate that the IEEE 802.11 WEP option is implemented. The default value of this attribute shall be false. |
| 1.3.6.1.4.1.171.1.3.1.1.3 | Scalardot11PowerManagementMode | read-only | current | This attribute shall specify the power management mode of the STA. When set to active, it shall indicate that the station is not in power-save mode. When set t… |
| 1.3.6.1.4.1.171.1.3.1.1.4 | Scalardot11DesiredSSID | read-write | current | This attribute reflects the Service Set ID used in the DesiredSSID parameter of the most recent MLME_Scan.request. This value may be modified by an external ma… |
| 1.3.6.1.4.1.171.1.3.1.1.5 | Scalardot11DesiredBSSType | read-only | current | This attribute shall specify the type of BSS the station shall use when scanning for a BSS with which to synchronize. This value is used to filter Probe Respon… |
| 1.3.6.1.4.1.171.1.3.1.1.6 | Scalardot11OperationalRateSet | read-write | current | This attribute shall specify the set of data rates at which the station may transmit data. Each octet contains a value representing a rate. Each rate shall be … |
| 1.3.6.1.4.1.171.1.3.1.1.7 | Scalardot11BeaconPeriod | read-write | current | This attribute shall specify the number of TU that a station shall use for scheduling Beacon transmissions. This value is transmitted in Beacon and Probe Respo… |
| 1.3.6.1.4.1.171.1.3.1.1.8 | Scalardot11DTIMPeriod | read-write | current | This attribute shall specify the number of beacon intervals that shall elapse between transmission of Beacons frames containing a TIM element whose DTIM Count … |
| 1.3.6.1.4.1.171.1.3.1.1.9 | Scalardot11DisassociateReason | read-only | current | This attribute holds the most recently transmitted Reason Code in a Disassociation frame. If no Disassociation frame has been transmitted, the value of this at… |
| 1.3.6.1.4.1.171.1.3.1.1.10 | Scalardot11DisassociateStation | read-only | current | This attribute holds the MAC address from the Address 1 field of the most recently transmitted Disassociation frame. If no Disassociation frame has been transm… |
| 1.3.6.1.4.1.171.1.3.1.1.11 | Scalardot11DeauthenticateReason | read-only | current | This attribute holds the most recently transmitted Reason Code in a Deauthentication frame. If no Deauthentication frame has been transmitted, the value of thi… |
| 1.3.6.1.4.1.171.1.3.1.1.12 | Scalardot11DeauthenticateStation | read-only | current | This attribute holds the MAC address from the Address 1 field of the most recently transmitted Deauthentication frame. If no Deauthentication frame has been tr… |
| 1.3.6.1.4.1.171.1.3.1.1.13 | Scalardot11AuthenticateFailStatus | read-only | current | This attribute holds the most recently transmitted Status Code in a failed Authentication frame. If no failed Authentication frame has been transmitted, the va… |
| 1.3.6.1.4.1.171.1.3.1.2 | Nodedot11APModeConfigEntry | |||
| 1.3.6.1.4.1.171.1.3.1.2.1 | Scalardot11AccessPointMode | read-write | current | This attribute shall be a set of all the access point mode supported by the AP. The following are the default values and the associated mode. Value = 1: Normal… |
| 1.3.6.1.4.1.171.1.3.1.2.2 | Scalardot11RemoteMACAddress | read-write | current | This Remote MAC Address used by these following AP mode: Wireless Bridge, Wireless AP Client, Backup AP, Repeater. Consequently, this attribute must be set if … |
| 1.3.6.1.4.1.171.1.3.1.2.3 | Scalardot11BackupAPRemoteServerIPAddress | read-write | current | This attribute used to check the wired LAN connection (A.K.A. Link Integrity) when AP in Backup AP mode. |
| 1.3.6.1.4.1.171.1.3.1.2.4 | Scalardot11GroupAPID | read-write | current | This attribute is to identify current Group ID of the AP. |
| 1.3.6.1.4.1.171.1.3.1.3 | Nodedot11PrivacyEntry | |||
| 1.3.6.1.4.1.171.1.3.1.3.1 | Scalardot11AuthenticationAlgorithm | read-only | current | This attribute shall be the authentication algorithms currently used by the AP. The following are the default values and the associated algorithm. Value = 1: O… |
| 1.3.6.1.4.1.171.1.3.1.3.2 | Scalardot11PrivacyInvoked | read-write | current | When this attribute is true, it shall indicate that the IEEE 802.11 WEP mechanism is used for transmitting frames of type Data. The default value of this attri… |
| 1.3.6.1.4.1.171.1.3.1.3.3 | Scalardot11WEPDefaultKeyID | read-write | current | This attribute shall indicate the use of the first, second, third, or fourth element of the WEPDefaultKeys array when set to values of zero, one, two, or three… |
| 1.3.6.1.4.1.171.1.3.1.3.4 | Scalardot11WEPKeyLength | read-write | current | This attribute shall indicate the length of WEP encryption length used. Value 1: 64 bit that need 5 characters of WEP Default Key Value 2: 128 bit that need 13… |
| 1.3.6.1.4.1.171.1.3.1.3.5 | Scalardot11WEPKeyMappingLength | read-only | current | The maximum number of tuples that dot11WEPKeyMappings can hold. |
| 1.3.6.1.4.1.171.1.3.1.3.6 | Scalardot11ExcludeUnencrypted | read-only | current | When this attribute is true, the STA shall not indicate at the MAC service interface received MSDUs that have the WEP subfield of the Frame Control field equal… |
| 1.3.6.1.4.1.171.1.3.1.3.7 | Scalardot11WEPICVErrorCount | read-only | current | This counter shall increment when a frame is received with the WEP subfield of the Frame Control field set to one and the value of the ICV as received in the f… |
| 1.3.6.1.4.1.171.1.3.1.3.8 | Scalardot11WEPExcludedCount | read-only | current | This counter shall increment when a frame is received with the WEP subfield of the Frame Control field set to zero and the value of dot11ExcludeUnencrypted cau… |
| 1.3.6.1.4.1.171.1.3.2 | Nodedot11mac | |||
| 1.3.6.1.4.1.171.1.3.2.1 | Nodedot11OperationEntry | |||
| 1.3.6.1.4.1.171.1.3.2.1.1 | Scalardot11MACAddress | read-only | current | Unique MAC Address assigned to the STA. |
| 1.3.6.1.4.1.171.1.3.2.1.2 | Scalardot11RTSThreshold | read-write | current | This attribute shall indicate the number of octets in an MPDU, below which an RTS/CTS handshake shall not be performed. An RTS/CTS handshake shall be performed… |
| 1.3.6.1.4.1.171.1.3.2.1.3 | Scalardot11ShortRetryLimit | read-write | current | This attribute shall indicate the maximum number of transmission attempts of a frame, the length of which is less than or equal to dot11RTSThreshold, that shal… |
| 1.3.6.1.4.1.171.1.3.2.1.4 | Scalardot11LongRetryLimit | read-write | current | This attribute shall indicate the maximum number of transmission attempts of a frame, the length of which is greater than dot11RTSThreshold, that shall be made… |
| 1.3.6.1.4.1.171.1.3.2.1.5 | Scalardot11FragmentationThreshold | read-write | current | This attribute shall specify the current maximum size, in octets, of the MPDU that may be delivered to the PHY. An MSDU shall be broken into fragments if its s… |
| 1.3.6.1.4.1.171.1.3.2.1.6 | Scalardot11SSIDBroadcast | read-write | current | This attribute indicate whether SSID broadcast is enabled. |
| 1.3.6.1.4.1.171.1.3.2.1.7 | Scalardot11PreambleType | read-write | current | This attribute indicate what preamble type is used. The default value should be Long Preamble. |
| 1.3.6.1.4.1.171.1.3.2.1.8 | Scalardot11MaxTransmitMSDULifetime | read-write | current | The MaxTransmitMSDULifetime shall be the elapsed time in TU, after the initial transmission of an MSDU, after which further attempts to transmit the MSDU shall… |
| 1.3.6.1.4.1.171.1.3.2.1.9 | Scalardot11MaxReceiveLifetime | read-write | current | The MaxReceiveLifetime shall be the elapsed time in TU, after the initial reception of a fragmented MMPDU or MSDU, after which further attempts to reassemble t… |
| 1.3.6.1.4.1.171.1.3.2.1.10 | Scalardot11ManufacturerID | read-only | current | The ManufacturerID shall include, at a minimum, the name of the manufacturer. It may include additional information at the manufacturer's discretion. The defau… |
| 1.3.6.1.4.1.171.1.3.2.1.11 | Scalardot11ProductID | read-only | current | The ProductID shall include, at a minimum, an identifier that is unique to the manufacturer. It may include additional information at the manufacturer's discre… |
| 1.3.6.1.4.1.171.1.3.2.2 | Nodedot11CountersEntry | |||
| 1.3.6.1.4.1.171.1.3.2.2.1 | Scalardot11TransmittedFragmentCount | read-only | current | This counter shall be incremented for an acknowledged MPDU with an individual address in the address 1 field or an MPDU with a multicast address in the address… |
| 1.3.6.1.4.1.171.1.3.2.2.2 | Scalardot11MulticastTransmittedFrameCount | read-only | current | This counter shall increment only when the multicast bit is set in the destination MAC address of a successfully transmitted MSDU. When operating as a STA in a… |
| 1.3.6.1.4.1.171.1.3.2.2.3 | Scalardot11FailedCount | read-only | current | This counter shall increment when an MSDU is not transmitted successfully due to the number of transmit attempts exceeding either the dot11ShortRetryLimit or d… |
| 1.3.6.1.4.1.171.1.3.2.2.4 | Scalardot11RetryCount | read-only | current | This counter shall increment when an MSDU is successfully transmitted after one or more retransmissions. |
| 1.3.6.1.4.1.171.1.3.2.2.5 | Scalardot11MultipleRetryCount | read-only | current | This counter shall increment when an MSDU is successfully transmitted after more than one retransmission. |
| 1.3.6.1.4.1.171.1.3.2.2.6 | Scalardot11FrameDuplicateCount | read-only | current | This counter shall increment when a frame is received that the Sequence Control field indicates is a duplicate. |
| 1.3.6.1.4.1.171.1.3.2.2.7 | Scalardot11RTSSuccessCount | read-only | current | This counter shall increment when a CTS is received in response to an RTS. |
| 1.3.6.1.4.1.171.1.3.2.2.8 | Scalardot11RTSFailureCount | read-only | current | This counter shall increment when a CTS is not received in response to an RTS. |
| 1.3.6.1.4.1.171.1.3.2.2.9 | Scalardot11ACKFailureCount | read-only | current | This counter shall increment when an ACK is not received when expected. |
| 1.3.6.1.4.1.171.1.3.2.2.10 | Scalardot11ReceivedFragmentCount | read-only | current | This counter shall be incremented for each successfully received MPDU of type Data or Management. |
| 1.3.6.1.4.1.171.1.3.2.2.11 | Scalardot11MulticastReceivedFrameCount | read-only | current | This counter shall increment when a MSDU is received with the multicast bit set in the destination MAC address. |
| 1.3.6.1.4.1.171.1.3.2.2.12 | Scalardot11FCSErrorCount | read-only | current | This counter shall increment when an FCS error is detected in a received MPDU. |
| 1.3.6.1.4.1.171.1.3.2.2.13 | Scalardot11TransmittedFrameCount | read-only | current | This counter shall increment for each successfully transmitted MSDU. |
| 1.3.6.1.4.1.171.1.3.2.2.14 | Scalardot11WEPUndecryptableCount | read-only | current | This counter shall increment when a frame is received with the WEP subfield of the Frame Control field set to one and the WEPOn value for the key mapped to the… |
| 1.3.6.1.4.1.171.1.3.3 | Nodedot11res | |||
| 1.3.6.1.4.1.171.1.3.3.1 | Nodedot11resAttribute | |||
| 1.3.6.1.4.1.171.1.3.3.1.1 | Scalardot11ResourceTypeIDName | read-only | current | Contains the name of the Resource Type ID managed object. The attribute is read-write and always contains the value RTID. This attribute value shall not be use… |
| 1.3.6.1.4.1.171.1.3.3.1.2 | Nodedot11ResourceInfoEntry | |||
| 1.3.6.1.4.1.171.1.3.3.1.2.1 | Scalardot11manufacturerOUI | read-only | current | Takes the value of an organizationally unique identifier. 0x00032F for D-Link, Inc. |
| 1.3.6.1.4.1.171.1.3.3.1.2.2 | Scalardot11manufacturerName | read-only | current | A printable string used to identify the manufacturer of the resource. Maximum string length is 128 octets. D-Link, Inc. |
| 1.3.6.1.4.1.171.1.3.3.1.2.3 | Scalardot11manufacturerProductName | read-only | current | A printable string used to identify the manufacturer's product name of the resource. Maximum string length is 128 octets. |
| 1.3.6.1.4.1.171.1.3.3.1.2.4 | Scalardot11manufacturerProductVersion | read-only | current | Printable string used to identify the manufacturer's product version of the resource. Maximum string length is 128 octets. |
| 1.3.6.1.4.1.171.1.3.4 | Nodedot11phy | |||
| 1.3.6.1.4.1.171.1.3.4.1 | Nodedot11PhyOperationEntry | |||
| 1.3.6.1.4.1.171.1.3.4.1.1 | Scalardot11PHYType | read-only | current | This is an 8-bit integer value that identifies the PHY type supported by the attached PLCP and PMD. Currently defined values and their corresponding PHY types … |
| 1.3.6.1.4.1.171.1.3.4.1.2 | Scalardot11CurrentRegDomain | read-only | current | The current regulatory domain this instance of the PMD is supporting. This object corresponds to one of the RegDomains listed in dot11RegDomainsSupported. |
| 1.3.6.1.4.1.171.1.3.4.1.3 | Scalardot11TempType | read-only | current | There are different operating temperature requirements dependent on the anticipated environmental conditions. This attribute describes the current PHY's operat… |
| 1.3.6.1.4.1.171.1.3.4.1.4 | Scalardot11RegDomainsSupportValue | read-only | current | There are different operational requirements dependent on the regulatory domain. This attribute list describes the regulatory domains the PLCP and PMD support … |
| 1.3.6.1.4.1.171.1.3.4.1.5 | Scalardot11SupportedDataRatesTxValue | read-only | current | The Transmit bit rates supported by the PLCP and PMD, represented by a count from X?2-X?f, corresponding to data rates in increments of 500Kb/s from 1 Mb/s to … |
| 1.3.6.1.4.1.171.1.3.4.1.6 | Scalardot11SupportedDataRatesRxValue | read-only | current | The receive bit rates supported by the PLCP and PMD, represented by a count from X?2-X?f, corresponding to data rates in increments of 500Kb/s from 1 Mb/s to 6… |
| 1.3.6.1.4.1.171.1.3.4.1.7 | Scalardot11CurrentTxRate | read-write | current | The current tx operating rate. corresponding to data rates in increments of 500Kb/s from 1 Mb/s to 63.5 Mb/s. |
| 1.3.6.1.4.1.171.1.3.4.1.8 | Scalardot11ChannelAgilityPresent | read-only | current | This attribute indicates that the PHY is capable of channel agility. |
| 1.3.6.1.4.1.171.1.3.4.1.9 | Scalardot11ChannelAgilityEnabled | read-only | current | This attribute indicates that the PHY channel agility functionality is enabled. |
| 1.3.6.1.4.1.171.1.3.4.2 | Nodedot11PhyAntennaEntry | |||
| 1.3.6.1.4.1.171.1.3.4.2.1 | Scalardot11CurrentTxAntenna | read-only | current | The current antenna being used to transmit. This value is one of the values appearing in dot11SupportedTxAntenna. This may be used by a management agent to con… |
| 1.3.6.1.4.1.171.1.3.4.2.2 | Scalardot11DiversitySupport | read-only | current | This implementation's support for diversity, encoded as: X'01'-diversity is available and is performed over the fixed list of antennas defined in dot11Diversit… |
| 1.3.6.1.4.1.171.1.3.4.2.3 | Scalardot11CurrentRxAntenna | read-only | current | The current antenna being used to receive, if the dot11 DiversitySupport indicates that diversity is not supported. The selected antenna shall be one of the an… |
| 1.3.6.1.4.1.171.1.3.4.3 | Nodedot11PhyTxPowerEntry | |||
| 1.3.6.1.4.1.171.1.3.4.3.1 | Scalardot11NumberSupportedPowerLevels | read-only | current | The number of power levels supported by the PMD. This attribute can have a value of 1 to 8. |
| 1.3.6.1.4.1.171.1.3.4.3.2 | Scalardot11TxPowerLevel1 | read-only | current | The transmit output power for LEVEL1 in mW. This is also the default power level. |
| 1.3.6.1.4.1.171.1.3.4.3.3 | Scalardot11TxPowerLevel2 | read-only | current | The transmit output power for LEVEL2 in mW. |
| 1.3.6.1.4.1.171.1.3.4.3.4 | Scalardot11TxPowerLevel3 | read-only | current | The transmit output power for LEVEL3 in mW. |
| 1.3.6.1.4.1.171.1.3.4.3.5 | Scalardot11TxPowerLevel4 | read-only | current | The transmit output power for LEVEL4 in mW. |
| 1.3.6.1.4.1.171.1.3.4.3.6 | Scalardot11TxPowerLevel5 | read-only | current | The transmit output power for LEVEL5 in mW. |
| 1.3.6.1.4.1.171.1.3.4.3.7 | Scalardot11TxPowerLevel6 | read-only | current | The transmit output power for LEVEL6 in mW. |
| 1.3.6.1.4.1.171.1.3.4.3.8 | Scalardot11TxPowerLevel7 | read-only | current | The transmit output power for LEVEL7 in mW. |
| 1.3.6.1.4.1.171.1.3.4.3.9 | Scalardot11TxPowerLevel8 | read-only | current | The transmit output power for LEVEL8 in mW. |
| 1.3.6.1.4.1.171.1.3.4.3.10 | Scalardot11CurrentTxPowerLevel | read-only | current | The TxPowerLevel N currently being used to transmit data. Some PHYs also use this value to determine the receiver sensitivity requirements for CCA. |
| 1.3.6.1.4.1.171.1.3.4.4 | Nodedot11PhyDSSSEntry | |||
| 1.3.6.1.4.1.171.1.3.4.4.1 | Scalardot11CurrentChannel | read-write | current | The current operating frequency channel of the DSSS PHY. Valid channel numbers are as defined in 15.4.6.2 |
| 1.3.6.1.4.1.171.1.3.4.4.2 | Scalardot11DynamicChannelEnabled | read-write | current | This attribute indicate dynamic channel is enabled. |
| 1.3.6.1.4.1.171.1.3.4.4.3 | Scalardot11CCAModeSupported | read-only | current | dot11CCAModeSupported is a bit-significant value, representing all of the CCA modes supported by the PHY. Valid values are: energy detect only (ED_ONLY) = 01, … |
| 1.3.6.1.4.1.171.1.3.4.4.4 | Scalardot11CurrentCCAMode | read-only | current | The current CCA method in operation. Valid values are: energy detect only (edonly) = 01, carrier sense only (csonly) = 02, carrier sense and energy detect (eda… |
| 1.3.6.1.4.1.171.1.3.4.4.5 | Scalardot11EDThreshold | read-write | current | The current Energy Detect Threshold being used by the DSSS PHY. |
| 1.3.6.1.4.1.171.1.3.4.4.6 | Scalardot11ShortPreambleOptionImplemented | read-only | current | This attribute, when true, shall indicate that the short preamble option as deTned in subclause 18.2.2.2 is implemented. The default value of this attribute sh… |
| 1.3.6.1.4.1.171.1.3.4.4.7 | Scalardot11PBCCOptionImplemented | read-only | current | This attribute, when true, shall indicate that the PBCC modulation option as defined in subclause 18.4.6.6 is implemented. The default value of this attribute … |
| 1.3.6.1.4.1.171.1.4 | NodedlkEnterpriseAPTrap |