DLINKSW-ACL-MIB
257 objects
The Structure of Access Control List Information for the proprietary enterprise.
Imported Objects
| DLINK-ID-REC-MIB | dlinkIndustrialCommon |
| IF-MIB | InterfaceIndex InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddressIPv6 InetAddressPrefixLength |
| Q-BRIDGE-MIB | VlanId VlanIdOrNone |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter64 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.14.28 | IdentitydlinkSwAclMIB | The Structure of Access Control List Information for the proprietary enterprise. | ||
| 1.3.6.1.4.1.171.14.28.0 | NodedAclMIBNotifications | |||
| 1.3.6.1.4.1.171.14.28.1 | NodedAclMIBObjects | |||
| 1.3.6.1.4.1.171.14.28.1.1 | NodedAclGeneral | |||
| 1.3.6.1.4.1.171.14.28.1.1.1 | TabledAclReSeqTable | not-accessible | current | A table consists of a list of information about how re-sequencing the rules in access lists. |
| 1.3.6.1.4.1.171.14.28.1.1.1.1 | RowdAclReSeqEntry | not-accessible | current | An entry appears in this table for controlling the re-sequence of an access-list. |
| 1.3.6.1.4.1.171.14.28.1.1.1.1.1 | ColumndAclReSeqAccessListName | not-accessible | current | Indicates the name of an access list. |
| 1.3.6.1.4.1.171.14.28.1.1.1.1.2 | ColumndAclReSeqStartingNumber | read-write | current | Indicates the initial value of sequence number of the corresponding access list. |
| 1.3.6.1.4.1.171.14.28.1.1.1.1.3 | ColumndAclReSeqIncrement | read-write | current | Indicates the number that the sequence numbers step. If the increment value is 5 and the beginning sequence number is 20, the subsequent sequence numbers are 2… |
| 1.3.6.1.4.1.171.14.28.1.2 | NodedAclMac | |||
| 1.3.6.1.4.1.171.14.28.1.2.1 | ScalardAclMacAccessListNumber | read-only | current | Indicates the number of entries present in the MAC access list table. |
| 1.3.6.1.4.1.171.14.28.1.2.2 | TabledAclMacAccessListTable | not-accessible | current | The table contains information about MAC access list. |
| 1.3.6.1.4.1.171.14.28.1.2.2.1 | RowdAclMacAccessListEntry | not-accessible | current | An entry defined in dAclMacAccessListTable. An entry is created/removed when an MAC access list is created/deleted. |
| 1.3.6.1.4.1.171.14.28.1.2.2.1.1 | ColumndAclMacAccessListName | not-accessible | current | The name of the MAC access list. |
| 1.3.6.1.4.1.171.14.28.1.2.2.1.2 | ColumndAclMacAccessListRowStatus | read-create | current | This object allows the dynamic creation and deletion of a MAC access list. |
| 1.3.6.1.4.1.171.14.28.1.2.2.1.3 | ColumndAclMacAccessListId | read-create | current | The number of the MAC access list. If user specify value zero(0) for this node, agent will assign a number for it. After the table created, this node should no… |
| 1.3.6.1.4.1.171.14.28.1.2.2.1.4 | ColumndAclMacAccessListCounterEnabled | read-create | current | This object indicates the counter state of the access list is enabled('true') or disabled('false'). And the counter state just for the all interface that appli… |
| 1.3.6.1.4.1.171.14.28.1.2.2.1.5 | ColumndAclMacAccessListClearStatAction | read-create | current | This object is used to clear statistics of the access list when set to 'clear'. No action is taken if this object is set to 'noOp'. The 'clear' action just for… |
| 1.3.6.1.4.1.171.14.28.1.2.2.1.6 | ColumndAclMacAccessListRemark | read-create | current | The description of the MAC access list. |
| 1.3.6.1.4.1.171.14.28.1.2.3 | TabledAclMacAccessRuleTable | not-accessible | current | A table consists of a list of rules for the MAC access list. |
| 1.3.6.1.4.1.171.14.28.1.2.3.1 | RowdAclMacAccessRuleEntry | not-accessible | current | An entry is defined dAclMacAccessRuleTable. The first instance identifier index value identifies the dAclMacAccessListEntry that a MAC access rule (dAclMacAcce… |
| 1.3.6.1.4.1.171.14.28.1.2.3.1.1 | ColumndAclMacAccessRuleSn | not-accessible | current | Specifies the sequence number of this rule. The lower the number is, the higher the priority of the rule. The special value of 0 means the sequence number will… |
| 1.3.6.1.4.1.171.14.28.1.2.3.1.2 | ColumndAclMacAccessRuleRowStatus | read-create | current | The row status variable, used according to installation and removal conventions for conceptual rows. |
| 1.3.6.1.4.1.171.14.28.1.2.3.1.3 | ColumndAclMacAccessRuleAction | read-create | current | This object indicates the result of the packet examination is to permit or deny or prevent to CPU. |
| 1.3.6.1.4.1.171.14.28.1.2.3.1.4 | ColumndAclMacAccessRuleSrcMacAddr | read-create | current | Specifies a source MAC address. |
| 1.3.6.1.4.1.171.14.28.1.2.3.1.5 | ColumndAclMacAccessRuleSrcMacWildcard | read-create | current | This object is a wildcard bitmap to specify a group of source MAC addresses. The bit value 1 indicates the corresponding bit will be ignored. The bit value 0 i… |
| 1.3.6.1.4.1.171.14.28.1.2.3.1.6 | ColumndAclMacAccessRuleDstMacAddr | read-create | current | Specifies a destination MAC address. |
| 1.3.6.1.4.1.171.14.28.1.2.3.1.7 | ColumndAclMacAccessRuleDstMacWildcard | read-create | current | This object is a wildcard bitmap to specify a group of destination MAC addresses. The bit value 1 indicates the corresponding bit will be ignored. The bit valu… |
| 1.3.6.1.4.1.171.14.28.1.2.3.1.8 | ColumndAclMacAccessRulePacketType | read-create | current | Specifies the Ethernet frame type. The value of none (1) means the frame type is not specified. |
| 1.3.6.1.4.1.171.14.28.1.2.3.1.9 | ColumndAclMacAccessRuleEthernetType | read-create | current | Specifies the Ethernet type for an Ethernet II or SNAP packet. The special value of -1 means the Ethernet type value is not specified. It is only meaningful wh… |
| 1.3.6.1.4.1.171.14.28.1.2.3.1.10 | ColumndAclMacAccessRuleLlcDSAP | read-create | obsolete | Specifies the DSAP value for the LLC packet. If the value is -1, it means the DSAP number is not specified. It is only meaningful when the dAclMacAccessRulePac… |
| 1.3.6.1.4.1.171.14.28.1.2.3.1.11 | ColumndAclMacAccessRuleLlcSSAP | read-create | obsolete | Specifies the SSAP value for the LLC packet. If the value is -1, it means the SSAP number is not specified. It is only meaningful when the dAclMacAccessRulePac… |
| 1.3.6.1.4.1.171.14.28.1.2.3.1.12 | ColumndAclMacAccessRuleLlcCntl | read-create | obsolete | Specifies the control field for the LLC packet. If the value is -1, it means the SSAP number is not specified. It is only meaningful when the dAclMacAccessRule… |
| 1.3.6.1.4.1.171.14.28.1.2.3.1.13 | ColumndAclMacAccessRuleDot1p | read-create | current | Specifies the priority value. The value of -1 means the priority is not specified. |
| 1.3.6.1.4.1.171.14.28.1.2.3.1.14 | ColumndAclMacAccessRuleInnerDot1p | read-create | current | Specifies the inner priority value. The value of -1 means the inner priority is not specified. |
| 1.3.6.1.4.1.171.14.28.1.2.3.1.15 | ColumndAclMacAccessRuleVlanID | read-create | current | Specifies the VLAN ID. A value of zero indicates the VLAN ID is not specified. This node and dAclMacAccessRuleVlanRangeMin/dAclMacAccessRuleVlanRangeMax cannot… |
| 1.3.6.1.4.1.171.14.28.1.2.3.1.16 | ColumndAclMacAccessRuleInnerVlanID | read-create | current | Specifies the inner VLAN ID. A value of zero indicates the inner VLAN ID is not specified. |
| 1.3.6.1.4.1.171.14.28.1.2.3.1.17 | ColumndAclMacAccessRuleTimeName | read-create | current | Specifies the name of time-period profile associated with the access-list delineating its activation period. The value 'NULL' means that this rule is not bound… |
| 1.3.6.1.4.1.171.14.28.1.2.3.1.18 | ColumndAclMacAccessRuleEthernetTypeMask | read-create | current | Specifies the mask for ethernet type defined by dAclMacAccessRuleEthernetType. Valid values are from 0x0000 to 0xFFFF. Default value is 0xFFFF. This node is va… |
| 1.3.6.1.4.1.171.14.28.1.2.3.1.19 | ColumndAclMacAccessRuleDot1pMask | read-create | current | Specifies the mask for priority defined by dAclMacAccessRuleDot1p. Valid values are from 0x00 to 0x07. Default value is 0x07. This node is valid only for the d… |
| 1.3.6.1.4.1.171.14.28.1.2.3.1.20 | ColumndAclMacAccessRuleInnerDot1pMask | read-create | current | Specifies the mask for inner priority defined by dAclMacAccessRuleInnerDot1p. Valid values are from 0x00 to 0x07. Default value is 0x07. This node is valid onl… |
| 1.3.6.1.4.1.171.14.28.1.2.3.1.21 | ColumndAclMacAccessRuleVlanIDMask | read-create | current | Specifies the mask for VLAN ID defined by dAclMacAccessRuleVlanID. Valid values are from 0x0000 to 0x0FFF. This node and dAclMacAccessRuleVlanRangeMin/dAclMacA… |
| 1.3.6.1.4.1.171.14.28.1.2.3.1.22 | ColumndAclMacAccessRuleInnerVlanIDMask | read-create | current | Specifies the mask for inner VLAN ID defined by dAclMacAccessRuleInnerVlanID. Valid values are from 0x0000 to 0x0FFF. Default value is 0x0FFF. This node is val… |
| 1.3.6.1.4.1.171.14.28.1.2.3.1.23 | ColumndAclMacAccessRuleVlanRangeMin | read-create | current | Specifies the minimum outer VLAN ID of a VLAN range. A value of zero indicates the VLAN range is not specified. This node and dAclMacAccessRuleVlanID/dAclMacAc… |
| 1.3.6.1.4.1.171.14.28.1.2.3.1.24 | ColumndAclMacAccessRuleVlanRangeMax | read-create | current | Specifies the maximum outer VLAN ID of a VLAN range. A value of zero indicates the VLAN range is not specified. This node and dAclMacAccessRuleVlanID/dAclMacAc… |
| 1.3.6.1.4.1.171.14.28.1.2.4 | TabledAclMacAccessGroupTable | not-accessible | current | The table represents a list of MAC access group configuration. |
| 1.3.6.1.4.1.171.14.28.1.2.4.1 | RowdAclMacAccessGroupEntry | not-accessible | current | An entry in dAclMacAccessGroupTable contains interface specific MAC access list association. |
| 1.3.6.1.4.1.171.14.28.1.2.4.1.1 | ColumndAclMacAccessGroupIfIndex | not-accessible | current | Indicates the ifIndex of the interface. Only physical port is valid interface. |
| 1.3.6.1.4.1.171.14.28.1.2.4.1.2 | ColumndAclMacAccessGroupApplyDirection | not-accessible | current | Indicates whether this access list is to be attached to ingress or egress direction. |
| 1.3.6.1.4.1.171.14.28.1.2.4.1.3 | ColumndAclMacAccessGroupRowStatus | read-create | current | The row status variable, used according to installation and removal conventions for conceptual rows. |
| 1.3.6.1.4.1.171.14.28.1.2.4.1.4 | ColumndAclMacAccessGroupAclName | read-create | current | The name of the MAC access list to be applied. |
| 1.3.6.1.4.1.171.14.28.1.2.4.1.5 | ColumndAclMacAccessGroupAclId | read-create | current | The ID of the MAC access list to be applied. User maybe specify access list ID(by this object) or name (by dAclMacAccessGroupAclName) to be applied. If both ac… |
| 1.3.6.1.4.1.171.14.28.1.3 | NodedAclIp | |||
| 1.3.6.1.4.1.171.14.28.1.3.1 | ScalardAclIpAccessListNumber | read-only | current | Indicates the number of entries present in the IP access list table. |
| 1.3.6.1.4.1.171.14.28.1.3.2 | TabledAclIpAccessListTable | not-accessible | current | The table contains IP access list configuration. |
| 1.3.6.1.4.1.171.14.28.1.3.2.1 | RowdAclIpAccessListEntry | not-accessible | current | An entry defined in dAclIpAccessListTable. An entry is created/removed when an IP access list is created/deleted. |
| 1.3.6.1.4.1.171.14.28.1.3.2.1.1 | ColumndAclIpAccessListName | not-accessible | current | The name of the IP access list. |
| 1.3.6.1.4.1.171.14.28.1.3.2.1.2 | ColumndAclIpAccessListRowStatus | read-create | current | This object allows the dynamic creation and deletion of an IP access list. |
| 1.3.6.1.4.1.171.14.28.1.3.2.1.3 | ColumndAclIpAccessExtended | read-create | current | This object indicates the IP access list is extended ('true') or standard ('false'). A standard ip access list means only IP address related i.e. source or des… |
| 1.3.6.1.4.1.171.14.28.1.3.2.1.4 | ColumndAclIpAccessListId | read-create | current | The number of the IP access list. If user specify value zero(0) for this node, agent will assign a number for it. After the table created, this node should not… |
| 1.3.6.1.4.1.171.14.28.1.3.2.1.5 | ColumndAclIpAccessListCounterEnabled | read-create | current | This object indicates the counter state of the access list is enabled('true') or disabled('false'). And the counter just for the all interface that applied the… |
| 1.3.6.1.4.1.171.14.28.1.3.2.1.6 | ColumndAclIpAccessListClearStatAction | read-create | current | This object is used to clear statistics of the access list when set to 'clear'. No action is taken if this object is set to 'noOp'. The 'clear' action just for… |
| 1.3.6.1.4.1.171.14.28.1.3.2.1.7 | ColumndAclIpAccessListRemark | read-create | current | The description of the IP access list. |
| 1.3.6.1.4.1.171.14.28.1.3.3 | TabledAclIpAccessRuleTable | not-accessible | current | The table contains a list of IP access rules for IP access lists. |
| 1.3.6.1.4.1.171.14.28.1.3.3.1 | RowdAclIpAccessRuleEntry | not-accessible | current | An entry is defined dAclIpAccessRuleTable. The first instance identifier index value identifies the dAclIpAccessListEntry that an IP access rule (dAclIpAccessR… |
| 1.3.6.1.4.1.171.14.28.1.3.3.1.1 | ColumndAclIpAccessRuleSn | not-accessible | current | Specifies the sequence number of this rule. The lower the number is, the higher the priority of the rule. The special value of 0 means the sequence number will… |
| 1.3.6.1.4.1.171.14.28.1.3.3.1.2 | ColumndAclIpAccessRuleRowStatus | read-create | current | The row status variable, used according to installation and removal conventions for conceptual rows. |
| 1.3.6.1.4.1.171.14.28.1.3.3.1.3 | ColumndAclIpAccessRuleAction | read-create | current | This object indicates the result of the packet examination is to permit or deny or prevent to CPU. |
| 1.3.6.1.4.1.171.14.28.1.3.3.1.4 | ColumndAclIpAccessRuleProtocol | read-create | current | Specifies the IP protocol. |
| 1.3.6.1.4.1.171.14.28.1.3.3.1.5 | ColumndAclIpAccessRuleUserDefProtocol | read-create | current | Specifies the user defined protocol ID when the dAclIpAccessRuleProtocol is 'userDefine (1)'. The value of -1 means the user defined protocol ID is not specifi… |
| 1.3.6.1.4.1.171.14.28.1.3.3.1.6 | ColumndAclIpAccessRuleSrcAddr | read-create | current | Specifies a source IP address. |
| 1.3.6.1.4.1.171.14.28.1.3.3.1.7 | ColumndAclIpAccessRuleSrcWildcard | read-create | current | This object is a wildcard bitmap to specify a group of source IP addresses. The bit value 1 indicates the corresponding bit will be ignored. The bit value 0 in… |
| 1.3.6.1.4.1.171.14.28.1.3.3.1.8 | ColumndAclIpAccessRuleDstAddr | read-create | current | Specifies a destination IP address. |
| 1.3.6.1.4.1.171.14.28.1.3.3.1.9 | ColumndAclIpAccessRuleDstWildcard | read-create | current | This object is a wildcard bitmap to specify a group of destination IP addresses. The bit value 1 indicates the corresponding bit will be ignored. The bit value… |
| 1.3.6.1.4.1.171.14.28.1.3.3.1.10 | ColumndAclIpAccessRuleSrcOperator | read-create | current | This object indicates how a packet's source TCP/UDP port number is compared. When the value of this object is eq(2),gt(3),lt(4) or neq(5) uses the dAclIpAccess… |
| 1.3.6.1.4.1.171.14.28.1.3.3.1.11 | ColumndAclIpAccessRuleSrcPort | read-create | current | This object indicates the source port number of TCP/UDP protocol. If the value is -1, it means the value is not specified. If the dAclIpAccessRuleSrcOperator o… |
| 1.3.6.1.4.1.171.14.28.1.3.3.1.12 | ColumndAclIpAccessRuleSrcPortRange | read-create | current | The source port number of the TCP/UDP protocol. If the dAclIpAccessRuleSrcOperator object in the same row is range(6), this object will be the ending port numb… |
| 1.3.6.1.4.1.171.14.28.1.3.3.1.13 | ColumndAclIpAccessRuleDstOperator | read-create | current | This object indicates how a packet's TCP/UDP destination port number is compared. When the value of this object is eq(2),gt(3),lt(4) or neq(5) uses the dAclIpA… |
| 1.3.6.1.4.1.171.14.28.1.3.3.1.14 | ColumndAclIpAccessRuleDstPort | read-create | current | This object indicates the destination port number of TCP/UDP protocol. If the value is -1, it means the value is not specified. If the dAclIpAccessRuleDstOpera… |
| 1.3.6.1.4.1.171.14.28.1.3.3.1.15 | ColumndAclIpAccessRuleDstPortRange | read-create | current | The destination port number of the TCP/UDP protocol. If the dAclIpAccessRuleDstOperator object in the same row is range(6), this object will be the ending port… |
| 1.3.6.1.4.1.171.14.28.1.3.3.1.16 | ColumndAclIpAccessRuleQosPrecedence | read-create | current | Specifies the value of precedence. The value of -1 means the value is not specified or not applicable. dAclIpAccessRuleQosPrecedence and dAclIpAccessRuleQosDsc… |
| 1.3.6.1.4.1.171.14.28.1.3.3.1.17 | ColumndAclIpAccessRuleQosTos | read-create | current | Specifies the value of type of service. The value of -1 means the value is not specified or not applicable. dAclIpAccessRuleQosTos and dAclIpAccessRuleQosDscp … |
| 1.3.6.1.4.1.171.14.28.1.3.3.1.18 | ColumndAclIpAccessRuleQosDscp | read-create | current | Specifies the value of DSCP code. The value of -1 means the value is not specified or not applicable. Neither dAclIpAccessRuleQosPrecedence nor dAclIpAccessRul… |
| 1.3.6.1.4.1.171.14.28.1.3.3.1.19 | ColumndAclIpAccessRuleIcmpType | read-create | current | This object indicates the type of ICMP protocol. If the value is -1, it means the value is not specified. This object is used for ICMP protocol only, hence whe… |
| 1.3.6.1.4.1.171.14.28.1.3.3.1.20 | ColumndAclIpAccessRuleIcmpCode | read-create | current | This object indicates the code of ICMP protocol. If the value is -1, it means the value is not specified. This object is used for ICMP protocol only, hence whe… |
| 1.3.6.1.4.1.171.14.28.1.3.3.1.21 | ColumndAclIpAccessRuleTimeName | read-create | current | Specifies the name of time-period profile associated with the access-list delineating its activation period. The value 'NULL' means that this rule is not bound… |
| 1.3.6.1.4.1.171.14.28.1.3.3.1.22 | ColumndAclIpAccRuleTcpFlag | read-create | current | Specifies the TCP flag fields. This node is available only for TCP protocol. The default value for this node is empty set, which means no TCP flag values are s… |
| 1.3.6.1.4.1.171.14.28.1.3.3.1.23 | ColumndAclIpAccRuleFragments | read-create | current | This object indicates the Packet fragment filtering status is enabled('true') or disabled('false'). |
| 1.3.6.1.4.1.171.14.28.1.3.3.1.24 | ColumndAclIpAccRuleUserDefProtocolMask | read-create | current | Specifies the mask for protocol ID defined by dAclIpAccessRuleUserDefProtocol. Valid values are from 0x00 to 0xFF. Default value is 0xFF. This node is valid on… |
| 1.3.6.1.4.1.171.14.28.1.3.3.1.25 | ColumndAclIpAccRuleSrcPortMask | read-create | current | Specifies the mask for L4 source port defined by dAclIpAccessRuleSrcPort. Valid values are from 0x0 to 0xFFFF. Default value is 0xFFFF. This object only can be… |
| 1.3.6.1.4.1.171.14.28.1.3.3.1.26 | ColumndAclIpAccRuleDstPortMask | read-create | current | Specifies the mask for L4 destination port defined by dAclIpAccessRuleDstPort. Valid values are from 0x0 to 0xFFFF. Default value is 0xFFFF. This object only c… |
| 1.3.6.1.4.1.171.14.28.1.3.3.1.27 | ColumndAclIpAccRuleQosPrecedenceMask | read-create | current | Specifies the mask for ip precedence defined by dAclIpAccessRuleQosPrecedence. Valid values are from 0x0 to 0x7. Default value is 0x7. This node is valid only … |
| 1.3.6.1.4.1.171.14.28.1.3.3.1.28 | ColumndAclIpAccRuleQosTosMask | read-create | current | Specifies the mask for type of service defined by dAclIpAccessRuleQosTos. Valid values are from 0x0 to 0xF. Default value is 0xF. This node is valid only for t… |
| 1.3.6.1.4.1.171.14.28.1.3.3.1.29 | ColumndAclIpAccRuleQosDscpMask | read-create | current | Specifies the mask for DSCP code defined by dAclIpAccessRuleQosDscp. Valid values are from 0x0 to 0x3F. Default value is 0x3F. This node is valid only for the … |
| 1.3.6.1.4.1.171.14.28.1.3.4 | TabledAclIpAccessGroupTable | not-accessible | current | The table represents a list of IP access group configuration. |
| 1.3.6.1.4.1.171.14.28.1.3.4.1 | RowdAclIpAccessGroupEntry | not-accessible | current | An entry in dAclIpAccessGroupTable contains interface specific IP access list association. |
| 1.3.6.1.4.1.171.14.28.1.3.4.1.1 | ColumndAclIpAccessGroupIfIndex | not-accessible | current | Indicates the ifIndex of the interface. Only physical port is valid interface. |
| 1.3.6.1.4.1.171.14.28.1.3.4.1.2 | ColumndAclIpAccessGroupApplyDirection | not-accessible | current | Indicates whether this access list is to be attached to ingress or egress direction. |
| 1.3.6.1.4.1.171.14.28.1.3.4.1.3 | ColumndAclIpAccessGroupStatus | read-create | current | The row status variable, used according to installation and removal conventions for conceptual rows. |
| 1.3.6.1.4.1.171.14.28.1.3.4.1.4 | ColumndAclIpAccessGroupAclName | read-create | current | The name of the IP access list to be applied. |
| 1.3.6.1.4.1.171.14.28.1.3.4.1.5 | ColumndAclIpAccessGroupAclId | read-create | current | The ID of the IP access list to be applied. User maybe specify access list ID(by this object) or name (by dAclIpAccessGroupAclName) to be applied. If both acce… |
| 1.3.6.1.4.1.171.14.28.1.4 | NodedAclIPv6 | |||
| 1.3.6.1.4.1.171.14.28.1.4.1 | ScalardAclIPv6AccessListNumber | read-only | current | Indicates the number of entries present in the IPv6 access list table. |
| 1.3.6.1.4.1.171.14.28.1.4.2 | TabledAclIPv6AccessListTable | not-accessible | current | The table contains IPv6 access list configuration. |
| 1.3.6.1.4.1.171.14.28.1.4.2.1 | RowdAclIPv6AccessListEntry | not-accessible | current | An entry defined in dAclIPv6AccessListTable. An entry is created/removed when an IPv6 access list is created/deleted. |
| 1.3.6.1.4.1.171.14.28.1.4.2.1.1 | ColumndAclIPv6AccessListName | not-accessible | current | The name of the IPv6 access list. |
| 1.3.6.1.4.1.171.14.28.1.4.2.1.2 | ColumndAclIPv6AccessListRowStatus | read-create | current | This object allows the dynamic creation and deletion of an IPv6 access list. |
| 1.3.6.1.4.1.171.14.28.1.4.2.1.3 | ColumndAclIPv6AccessExtended | read-create | current | This object indicates the IPv6 access list is extended ('true') or standard ('false'). A standard ip access list means only IPv6 address related i.e. source or… |
| 1.3.6.1.4.1.171.14.28.1.4.2.1.4 | ColumndAclIPv6AccessListId | read-create | current | The number of the IPv6 access list. |
| 1.3.6.1.4.1.171.14.28.1.4.2.1.5 | ColumndAclIPv6AccessListCounterEnabled | read-create | current | This object indicates the counter state of the access list is enabled('true') or disabled('false'). And the counter just for the all interface that applied the… |
| 1.3.6.1.4.1.171.14.28.1.4.2.1.6 | ColumndAclIPv6AccessListClearStatAction | read-create | current | This object is used to clear statistics of the access list when set to 'clear'. No action is taken if this object is set to 'noOp'. The 'clear' action just for… |
| 1.3.6.1.4.1.171.14.28.1.4.2.1.7 | ColumndAclIPv6AccessListRemark | read-create | current | The description of the IPv6 access list. |
| 1.3.6.1.4.1.171.14.28.1.4.3 | TabledAclIPv6AccessRuleTable | not-accessible | current | The table contains a list of IPv6 access rules for IPv6 access lists. |
| 1.3.6.1.4.1.171.14.28.1.4.3.1 | RowdAclIPv6AccessRuleEntry | not-accessible | current | An entry is defined dAclIPv6AccessRuleTable. The first instance identifier index value identifies the dAclIPv6AccessListEntry that an IPv6 access rule (dAclIPv… |
| 1.3.6.1.4.1.171.14.28.1.4.3.1.1 | ColumndAclIPv6AccessRuleSn | not-accessible | current | Specifies the sequence number of this rule. The lower the number is, the higher the priority of the rule. The special value of 0 means the sequence number will… |
| 1.3.6.1.4.1.171.14.28.1.4.3.1.2 | ColumndAclIPv6AccessRuleRowStatus | read-create | current | The row status variable, used according to installation and removal conventions for conceptual rows. |
| 1.3.6.1.4.1.171.14.28.1.4.3.1.3 | ColumndAclIPv6AccessRuleAction | read-create | current | This object indicates the result of the packet examination is to permit or deny or prevent to CPU. |
| 1.3.6.1.4.1.171.14.28.1.4.3.1.4 | ColumndAclIPv6AccessRuleProtocol | read-create | current | Specifies the IP protocol. |
| 1.3.6.1.4.1.171.14.28.1.4.3.1.5 | ColumndAclIPv6AccessRuleUserDefProtocol | read-create | current | Specifies the user defined protocol ID when the dAclIPv6AccessRuleProtocol is 'userDefine (1)'. The value of -1 means the user defined protocol ID is not speci… |
| 1.3.6.1.4.1.171.14.28.1.4.3.1.6 | ColumndAclIPv6AccessRuleSrcAddr | read-create | current | Specifies a source IPv6 address. |
| 1.3.6.1.4.1.171.14.28.1.4.3.1.7 | ColumndAclIPv6AccessRuleSrcPrefixLen | read-create | current | Specifies the length in bits of source IPv6 address will be matched. In other words, the value of 0 indicates any source IPv6 address is specified. When the va… |
| 1.3.6.1.4.1.171.14.28.1.4.3.1.8 | ColumndAclIPv6AccessRuleDstAddr | read-create | current | Specifies a destination IPv6 address. |
| 1.3.6.1.4.1.171.14.28.1.4.3.1.9 | ColumndAclIPv6AccessRuleDstPrefixLen | read-create | current | Specifies the length in bits of destination IPv6 address will be matched. In other words, the value of 0 indicates any destination IPv6 address is specified. W… |
| 1.3.6.1.4.1.171.14.28.1.4.3.1.10 | ColumndAclIPv6AccessRuleSrcOperator | read-create | current | This object indicates how a packet's TCP/UDP source port number is compared. When the value of this object is eq(2),gt(3),lt(4) or neq(5) uses the dAclIPv6Acce… |
| 1.3.6.1.4.1.171.14.28.1.4.3.1.11 | ColumndAclIPv6AccessRuleSrcPort | read-create | current | This object indicates the source port number of TCP/UDP protocol. If the value is -1, it means the value is not specified. If the dAclIPv6AccessRuleSrcOperator… |
| 1.3.6.1.4.1.171.14.28.1.4.3.1.12 | ColumndAclIPv6AccessRuleSrcPortRange | read-create | current | The source port number of the TCP/UDP protocol. If the dAclIPv6AccessRuleSrcOperator object in the same row is range(6), this object will be the ending port nu… |
| 1.3.6.1.4.1.171.14.28.1.4.3.1.13 | ColumndAclIPv6AccessRuleDstOperator | read-create | current | This object indicates how a packet's TCP/UDP destination port number is compared. When the value of this object is eq(2),gt(3),lt(4) or neq(5) uses the dAclIPv… |
| 1.3.6.1.4.1.171.14.28.1.4.3.1.14 | ColumndAclIPv6AccessRuleDstPort | read-create | current | This object indicates the destination port number of TCP/UDP protocol. If the value is -1, it means the value is not specified. If the dAclIPv6AccessRuleDstOpe… |
| 1.3.6.1.4.1.171.14.28.1.4.3.1.15 | ColumndAclIPv6AccessRuleDstPortRange | read-create | current | The destination port number of the TCP/UDP protocol. If the dAclIPv6AccessRuleDstOperator object in the same row is range(6), this object will be the ending po… |
| 1.3.6.1.4.1.171.14.28.1.4.3.1.16 | ColumndAclIPv6AccessRuleDscp | read-create | current | Specifies the matching DSCP code value in IPv6 header. The value of -1 means the DSCP value is not specified. |
| 1.3.6.1.4.1.171.14.28.1.4.3.1.17 | ColumndAclIPv6AccessRuleIcmpType | read-create | current | This object indicates the type of ICMP protocol. The value of -1 means the ICMP type is not specified. This object is used for ICMP protocol only, hence when t… |
| 1.3.6.1.4.1.171.14.28.1.4.3.1.18 | ColumndAclIPv6AccessRuleIcmpCode | read-create | current | This object indicates the code of ICMP protocol. If the value is -1, it means the value is not specified. This object is used for ICMP protocol only, hence whe… |
| 1.3.6.1.4.1.171.14.28.1.4.3.1.19 | ColumndAclIPv6AccessRuleTimeName | read-create | current | Specifies the name of time-period profile associated with the access-list delineating its activation period. The value 'NULL' means that this rule is not bound… |
| 1.3.6.1.4.1.171.14.28.1.4.3.1.20 | ColumndAclIPv6AccRuleTcpFlag | read-create | current | Specifies the TCP flag fields. And this node is available only for TCP protocol. The default value for this node is empty set, which means no TCP flag values a… |
| 1.3.6.1.4.1.171.14.28.1.4.3.1.21 | ColumndAclIPv6AccRuleFragments | read-create | current | This object indicates the Packet fragment filtering status is enabled('true') or disabled('false'). |
| 1.3.6.1.4.1.171.14.28.1.4.3.1.22 | ColumndAclIPv6AccRuleFlowLabel | read-create | current | This object indicates the Flow label value. The value of -1 means the flow-label value is not specified. |
| 1.3.6.1.4.1.171.14.28.1.4.3.1.23 | ColumndAclIPv6AccRuleTrafficClass | read-create | current | Specifies the matching traffic class value in IPv6 header. The value of -1 means the traffic class value is not specified. This node and dAclIPv6AccessRuleDscp… |
| 1.3.6.1.4.1.171.14.28.1.4.3.1.24 | ColumndAclIPv6AccRuleUserDefProtocolMask | read-create | current | Specifies the mask for protocol ID defined by dAclIPv6AccessRuleUserDefProtocol. Valid values are from 0x00 to 0xFF. Default value is 0xFF. This node is valid … |
| 1.3.6.1.4.1.171.14.28.1.4.3.1.25 | ColumndAclIPv6AccRuleSrcPortMask | read-create | current | Specifies the mask for L4 source port defined by dAclIPv6AccessRuleSrcPort. Valid values are from 0x0 to 0xFFFF. Default value is 0xFFFF. This object only can … |
| 1.3.6.1.4.1.171.14.28.1.4.3.1.26 | ColumndAclIPv6AccRuleDstPortMask | read-create | current | Specifies the mask for L4 destination port defined by dAclIPv6AccessRuleDstPort. Valid values are from 0x0 to 0xFFFF. Default value is 0xFFFF. This object only… |
| 1.3.6.1.4.1.171.14.28.1.4.3.1.27 | ColumndAclIPv6AccRuleDscpMask | read-create | current | Specifies the mask for DSCP code defined by dAclIPv6AccessRuleDscp. Valid values are from 0x0 to 0x3F. Default value is 0x3F. This node is valid only for the d… |
| 1.3.6.1.4.1.171.14.28.1.4.3.1.28 | ColumndAclIPv6AccRuleFlowLabelMask | read-create | current | Specifies the mask for Flow label value defined by dAclIPv6AccRuleFlowLabel. Valid values are from 0x0 to 0xFFFFF. Default value is 0xFFFFF. This node is valid… |
| 1.3.6.1.4.1.171.14.28.1.4.3.1.29 | ColumndAclIPv6AccRuleTrafficClassMask | read-create | current | Specifies the mask for traffic class defined by dAclIPv6AccRuleTrafficClass. Valid values are from 0x0 to 0xFF. Default value is 0xFF. This node is valid only … |
| 1.3.6.1.4.1.171.14.28.1.4.4 | TabledAclIPv6AccessGroupTable | not-accessible | current | The table represents a list of IPv6 access group configuration. |
| 1.3.6.1.4.1.171.14.28.1.4.4.1 | RowdAclIPv6AccessGroupEntry | not-accessible | current | An entry in dAclIPv6AccessGroupTable contains interface specific IPv6 access list association. |
| 1.3.6.1.4.1.171.14.28.1.4.4.1.1 | ColumndAclIPv6AccessGroupIfIndex | not-accessible | current | Indicates the ifIndex of the interface. Only physical port is valid interface. |
| 1.3.6.1.4.1.171.14.28.1.4.4.1.2 | ColumndAclIpv6AccessGroupApplyDirection | not-accessible | current | Indicates whether this ACL access list is to be attached to ingress or egress direction. |
| 1.3.6.1.4.1.171.14.28.1.4.4.1.3 | ColumndAclIPv6AccessGroupStatus | read-create | current | The row status variable, used according to installation and removal conventions for conceptual rows. |
| 1.3.6.1.4.1.171.14.28.1.4.4.1.4 | ColumndAclIPv6AccessGroupAclName | read-create | current | The name of the IPv6 access list to be applied. |
| 1.3.6.1.4.1.171.14.28.1.4.4.1.5 | ColumndAclIPv6AccessGroupAclId | read-create | current | The ID of the IPv6 access list to be applied. User maybe specify access list ID(by this object) or name (by dAclIPv6AccessGroupAclName) to be applied. If both … |
| 1.3.6.1.4.1.171.14.28.1.5 | NodedAclExpert | |||
| 1.3.6.1.4.1.171.14.28.1.5.1 | ScalardAclExpertAccessListNumber | read-only | current | Indicates the number of entries present in the extended expert access list table. |
| 1.3.6.1.4.1.171.14.28.1.5.2 | TabledAclExpertAccessListTable | not-accessible | current | The table contains information about extended expert access list. |
| 1.3.6.1.4.1.171.14.28.1.5.2.1 | RowdAclExpertAccessListEntry | not-accessible | current | An entry defined in dAclExpertAccessListTable. An entry is created/removed when an extended expert access list is created/deleted. |
| 1.3.6.1.4.1.171.14.28.1.5.2.1.1 | ColumndAclExpertAccessListName | not-accessible | current | The name of the extended expert access list. |
| 1.3.6.1.4.1.171.14.28.1.5.2.1.2 | ColumndAclExpertAccessListRowStatus | read-create | current | This object allows the dynamic creation and deletion of an extended expert access list. |
| 1.3.6.1.4.1.171.14.28.1.5.2.1.3 | ColumndAclExpertAccessListId | read-create | current | The number of the extended expert access list. |
| 1.3.6.1.4.1.171.14.28.1.5.2.1.4 | ColumndAclExpertAccessListCounterEnabled | read-create | current | This object indicates the counter state of the access list is enabled('true') or disabled('false'). And the counter just for the all interface that applied the… |
| 1.3.6.1.4.1.171.14.28.1.5.2.1.5 | ColumndAclExpertAccessListClearStatAction | read-create | current | This object is used to clear statistics of the access list when set to 'clear'. No action is taken if this object is set to 'noOp'. The 'clear' action just for… |
| 1.3.6.1.4.1.171.14.28.1.5.2.1.6 | ColumndAclExpertAccessListRemark | read-create | current | The description of the Expert access list. |
| 1.3.6.1.4.1.171.14.28.1.5.3 | TabledAclExpertAccessRuleTable | not-accessible | current | A table consists of a list of rules for the extended expert access list. |
| 1.3.6.1.4.1.171.14.28.1.5.3.1 | RowdAclExpertAccessRuleEntry | not-accessible | current | An entry is defined ddAclExpertAccessRuleTable. The first instance identifier index value identifies the dAclExpertAccessListEntry that a extended expert acces… |
| 1.3.6.1.4.1.171.14.28.1.5.3.1.1 | ColumndAclExpertAccRuleSn | not-accessible | current | Specifies the sequence number of this rule. The lower the number is, the higher the priority of the rule. The special value of 0 means the sequence number will… |
| 1.3.6.1.4.1.171.14.28.1.5.3.1.2 | ColumndAclExpertAccRuleRowStatus | read-create | current | The row status variable, used according to installation and removal conventions for conceptual rows. |
| 1.3.6.1.4.1.171.14.28.1.5.3.1.3 | ColumndAclExpertAccRuleAction | read-create | current | This object indicates the result of the packet examination is to permit or deny or prevent to CPU. |
| 1.3.6.1.4.1.171.14.28.1.5.3.1.4 | ColumndAclExpertAccRuleProtocol | read-create | current | Specifies the IP protocol. |
| 1.3.6.1.4.1.171.14.28.1.5.3.1.5 | ColumndAclExpertAccRuleUserDefProtocol | read-create | current | Specifies the user defined protocol ID when the dAclExpertAccRuleProtocol is 'userDefine (1)'. The value of -1 means the user defined protocol ID is not specif… |
| 1.3.6.1.4.1.171.14.28.1.5.3.1.6 | ColumndAclExpertAccRuleSrcIpAddr | read-create | current | Specifies a source IP address. |
| 1.3.6.1.4.1.171.14.28.1.5.3.1.7 | ColumndAclExpertAccRuleSrcIpWildcard | read-create | current | This object is a wildcard bitmap to specify a group of source IP addresses. The bit value 1 indicates the corresponding bit will be ignored. The bit value 0 in… |
| 1.3.6.1.4.1.171.14.28.1.5.3.1.8 | ColumndAclExpertAccRuleSrcMacAddr | read-create | current | Specifies a source MAC address. |
| 1.3.6.1.4.1.171.14.28.1.5.3.1.9 | ColumndAclExpertAccRuleSrcMacWildcard | read-create | current | This object is a wildcard bitmap to specify a group of source MAC addresses. The bit value 1 indicates the corresponding bit will be ignored. The bit value 0 i… |
| 1.3.6.1.4.1.171.14.28.1.5.3.1.10 | ColumndAclExpertAccRuleSrcOperator | read-create | current | This object indicates how a packet's source TCP/UDP port number is compared. When the value of this object is eq(2),gt(3),lt(4) or neq(5) uses the dAclExpertAc… |
| 1.3.6.1.4.1.171.14.28.1.5.3.1.11 | ColumndAclExpertAccRuleSrcPort | read-create | current | This object indicates the source port number of TCP/UDP protocol. If the value is -1, it means the value is not specified. If the dAclExpertAccsRuleSrcOperator… |
| 1.3.6.1.4.1.171.14.28.1.5.3.1.12 | ColumndAclExpertAccRuleSrcPortRange | read-create | current | The source port number of the TCP/UDP protocol. If the dAclExpertAccsRuleSrcOperator object in the same row is range(6), this object will be the ending port nu… |
| 1.3.6.1.4.1.171.14.28.1.5.3.1.13 | ColumndAclExpertAccRuleDstIpAddr | read-create | current | Specifies a destination IP address. |
| 1.3.6.1.4.1.171.14.28.1.5.3.1.14 | ColumndAclExpertAccRuleDstIpWildcard | read-create | current | This object is a wildcard bitmap to specify a group of destination IP addresses. The bit value 1 indicates the corresponding bit will be ignored. The bit value… |
| 1.3.6.1.4.1.171.14.28.1.5.3.1.15 | ColumndAclExpertAccRuleDstMacAddr | read-create | current | Specifies a destination MAC address. |
| 1.3.6.1.4.1.171.14.28.1.5.3.1.16 | ColumndAclExpertAccRuleDstMacWildcard | read-create | current | This object is a wildcard bitmap to specify a group of destination MAC addresses. The bit value 1 indicates the corresponding bit will be ignored. The bit valu… |
| 1.3.6.1.4.1.171.14.28.1.5.3.1.17 | ColumndAclExpertAccRuleDstOperator | read-create | current | This object indicates how a packet's TCP/UDP destination port number is compared. When the value of this object is eq(2),gt(3),lt(4) or neq(5) uses the dAclExp… |
| 1.3.6.1.4.1.171.14.28.1.5.3.1.18 | ColumndAclExpertAccRuleDstPort | read-create | current | This object indicates the destination port number of TCP/UDP protocol. If the value is -1, it means the value is not specified. If the dAclExpertAccsRuleDstOpe… |
| 1.3.6.1.4.1.171.14.28.1.5.3.1.19 | ColumndAclExpertAccRuleDstPortRange | read-create | current | The destination port number of the TCP/UDP protocol. If the dAclExpertAccsRuleDstOperator object in the same row is range(6), this object will be the ending po… |
| 1.3.6.1.4.1.171.14.28.1.5.3.1.20 | ColumndAclExpertAccRuleVlanID | read-create | current | Specifies the VLAN ID. A value of zero indicates the VLAN ID is not specified. |
| 1.3.6.1.4.1.171.14.28.1.5.3.1.21 | ColumndAclExpertAccRuleInnerVlanID | read-create | current | Specifies the inner VLAN ID. A value of zero indicates the inner VLAN ID is not specified. |
| 1.3.6.1.4.1.171.14.28.1.5.3.1.22 | ColumndAclExpertAccRuleQosPrecedence | read-create | current | Specifies the value of precedence. The value of -1 means the value is not specified or not applicable. dAclExpertAccRuleQosPrecedence and dAclExpertAccRuleQosD… |
| 1.3.6.1.4.1.171.14.28.1.5.3.1.23 | ColumndAclExpertAccRuleQosTos | read-create | current | Specifies the value of type of service. The value of -1 means the value is not specified or not applicable. dAclExpertAccRuleQosTos and dAclExpertAccRuleQosDsc… |
| 1.3.6.1.4.1.171.14.28.1.5.3.1.24 | ColumndAclExpertAccRuleQosDscp | read-create | current | Specifies the value of DSCP code. The value of -1 means the value is not specified or not applicable. Neither dAclExpertAccRuleQosPrecedence nor dAclExpertAccR… |
| 1.3.6.1.4.1.171.14.28.1.5.3.1.25 | ColumndAclExpertAccRuleIcmpType | read-create | current | This object indicates the type of ICMP protocol. If the value is -1, it means the value is not specified. This object is used for ICMP protocol only, hence whe… |
| 1.3.6.1.4.1.171.14.28.1.5.3.1.26 | ColumndAclExpertAccRuleIcmpCode | read-create | current | This object indicates the code of ICMP protocol. If the value is -1, it means the value is not specified. This object is used for ICMP protocol only, hence whe… |
| 1.3.6.1.4.1.171.14.28.1.5.3.1.27 | ColumndAclExpertAccRuleTimeName | read-create | current | Specifies the name of time-period profile associated with the access-list delineating its activation period. The value 'NULL' means that this rule is not bound… |
| 1.3.6.1.4.1.171.14.28.1.5.3.1.28 | ColumndAclExpertAccRuleTcpFlag | read-create | current | Specifies the TCP flag fields. This node is available only for TCP protocol. The default value for this node is empty set, which means no TCP flag values are s… |
| 1.3.6.1.4.1.171.14.28.1.5.3.1.29 | ColumndAclExpertAccRuleFragments | read-create | current | This object indicates the Packet fragment filtering status is enabled('true') or disabled('false'). |
| 1.3.6.1.4.1.171.14.28.1.5.3.1.30 | ColumndAclExpertAccRuleOuterCos | read-create | current | Specifies the value of inner priority. The value of -1 means the value is not specified or not applicable. |
| 1.3.6.1.4.1.171.14.28.1.5.3.1.31 | ColumndAclExpertAccRuleInnerCos | read-create | current | Specifies the value of inner priority, the node is availabe just for the node dAclExpertAccRuleOuterCos be specified. The value of -1 means the value is not sp… |
| 1.3.6.1.4.1.171.14.28.1.5.3.1.32 | ColumndAclExpertAccRuleUserDefProtocolMask | read-create | current | Specifies the mask for protocol ID defined by dAclExpertAccRuleUserDefProtocol. Valid values are from 0x00 to 0xFF. Default value is 0xFF. This node is valid o… |
| 1.3.6.1.4.1.171.14.28.1.5.3.1.33 | ColumndAclExpertAccRuleSrcPortMask | read-create | current | Specifies the mask for L4 source port defined by dAclExpertAccRuleSrcPort. Valid values are from 0x0 to 0xFFFF. Default value is 0xFFFF. This object only can b… |
| 1.3.6.1.4.1.171.14.28.1.5.3.1.34 | ColumndAclExpertAccRuleDstPortMask | read-create | current | Specifies the mask for L4 destination port defined by dAclExpertAccRuleDstPort. Valid values are from 0x0 to 0xFFFF. Default value is 0xFFFF. This object only … |
| 1.3.6.1.4.1.171.14.28.1.5.3.1.35 | ColumndAclExpertAccRuleVlanIDMask | read-create | current | Specifies the mask for VLAN ID defined by dAclExpertAccRuleVlanID. Valid values are from 0x0000 to 0x0FFF. This node and dAclExpertAccRuleVlanRangeMin/dAclExpe… |
| 1.3.6.1.4.1.171.14.28.1.5.3.1.36 | ColumndAclExpertAccRuleInnerVlanIDMask | read-create | current | Specifies the mask for inner VLAN ID defined by dAclExpertAccRuleInnerVlanID. Valid values are from 0x0000 to 0x0FFF. Default value is 0x0FFF. This node is val… |
| 1.3.6.1.4.1.171.14.28.1.5.3.1.37 | ColumndAclExpertAccRuleQosPrecedenceMask | read-create | current | Specifies the mask for ip precedence defined by dAclExpertAccRuleQosPrecedence. Valid values are from 0x0 to 0x7. Default value is 0x7. This node is valid only… |
| 1.3.6.1.4.1.171.14.28.1.5.3.1.38 | ColumndAclExpertAccRuleQosTosMask | read-create | current | Specifies the mask for type of service defined by dAclExpertAccRuleQosTos. Valid values are from 0x0 to 0xF. Default value is 0xF. This node is valid only for … |
| 1.3.6.1.4.1.171.14.28.1.5.3.1.39 | ColumndAclExpertAccRuleQosDscpMask | read-create | current | Specifies the mask for DSCP code defined by dAclExpertAccRuleQosDscp. Valid values are from 0x0 to 0x3F. Default value is 0x3F. This node is valid only for the… |
| 1.3.6.1.4.1.171.14.28.1.5.3.1.40 | ColumndAclExpertAccRuleOuterCosMask | read-create | current | Specifies the mask for priority defined by dAclExpertAccRuleOuterCos. Valid values are from 0x00 to 0x07. Default value is 0x07. This node is valid only for th… |
| 1.3.6.1.4.1.171.14.28.1.5.3.1.41 | ColumndAclExpertAccRuleInnerCosMask | read-create | current | Specifies the mask for inner priority defined by dAclExpertAccRuleInnerCos. Valid values are from 0x00 to 0x07. Default value is 0x07. This node is valid only … |
| 1.3.6.1.4.1.171.14.28.1.5.3.1.42 | ColumndAclExpertAccRuleVlanRangeMin | read-create | current | Specifies the minimum outer VLAN ID of a VLAN range. A value of zero indicates the VLAN range is not specified. This node and dAclMacAccessRuleVlanID/dAclMacAc… |
| 1.3.6.1.4.1.171.14.28.1.5.3.1.43 | ColumndAclExpertAccRuleVlanRangeMax | read-create | current | Specifies the maximum outer VLAN ID of a VLAN range. A value of zero indicates the VLAN range is not specified. This node and dAclMacAccessRuleVlanID/dAclMacAc… |
| 1.3.6.1.4.1.171.14.28.1.5.4 | TabledAclExpertAccessGroupTable | not-accessible | current | The table represents a list of extended expert access group configuration. |
| 1.3.6.1.4.1.171.14.28.1.5.4.1 | RowdAclExpertAccessGroupEntry | not-accessible | current | An entry in dAclExpertAccessGroupTable contains interface specific extended expert access list association. |
| 1.3.6.1.4.1.171.14.28.1.5.4.1.1 | ColumndAclExpertAccessGroupIfIndex | not-accessible | current | Indicates the ifIndex of the interface. Only physical port is valid interface. |
| 1.3.6.1.4.1.171.14.28.1.5.4.1.2 | ColumndAclExpertAccessGroupApplyDirection | not-accessible | current | Indicates whether this ACL access list is to be attached to ingress or egress direction. |
| 1.3.6.1.4.1.171.14.28.1.5.4.1.3 | ColumndAclExpertAccessGroupRowStatus | read-create | current | The row status variable, used according to installation and removal conventions for conceptual rows. |
| 1.3.6.1.4.1.171.14.28.1.5.4.1.4 | ColumndAclExpertAccessGroupAclName | read-create | current | The name of the Expert access list to be applied. |
| 1.3.6.1.4.1.171.14.28.1.5.4.1.5 | ColumndAclExpertAccessGroupAclId | read-create | current | The ID of the Expert access list to be applied. User maybe specify access list ID(by this object) or name (by dAclExpertAccessGroupAclName) to be applied. If b… |
| 1.3.6.1.4.1.171.14.28.1.6 | NodedAclVlan | |||
| 1.3.6.1.4.1.171.14.28.1.6.1 | TabledAclVlanSubMapTable | not-accessible | current | The table contains a list of sub-map configuration. The first instance identifier index value (dAclVlanAccMapName) identifies the entry(dAclVlanSubMapEntry) be… |
| 1.3.6.1.4.1.171.14.28.1.6.1.1 | RowdAclVlanSubMapEntry | not-accessible | current | An entry is defined dAclVlanSubMapTable. |
| 1.3.6.1.4.1.171.14.28.1.6.1.1.1 | ColumndAclVlanAccMapName | not-accessible | current | This object is used to specify the name of an VLAN acess map. |
| 1.3.6.1.4.1.171.14.28.1.6.1.1.2 | ColumndAclVlanAccSubMapSeq | not-accessible | current | Indicates the sequence number of a VLAN access rule. The value range is 1 to 65535. The value of 0 indicates the number is not specified and sequence number wi… |
| 1.3.6.1.4.1.171.14.28.1.6.1.1.3 | ColumndAclVlanAccSubMapRowStatus | read-create | current | The row status variable, used according to installation and removal conventions for conceptual rows. |
| 1.3.6.1.4.1.171.14.28.1.6.1.1.4 | ColumndAclVlanAccSubMapMatchAclName | read-create | current | This object indicates the name of MAC/IP/IPv6 ACL which will be associated. |
| 1.3.6.1.4.1.171.14.28.1.6.1.1.5 | ColumndAclVlanAccessSubMapAction | read-create | current | This object indicates the action when the packet that matches a sub-map (that is packet permitted by the associated access-list). |
| 1.3.6.1.4.1.171.14.28.1.6.1.1.6 | ColumndAclVlanAccSubMapRedirectIfIndex | read-create | current | This object indicates ifIndex of the interface the packet will be redirected. When the dAclVlanAccessAction in the same row is set to other than 'redirect', th… |
| 1.3.6.1.4.1.171.14.28.1.6.1.1.7 | ColumndAclVlanAccSubMapMatchAclId | read-create | current | This object indicates the ID of MAC/IP/IPv6 ACL access list which will be associated. User may specify access list ID(by this object) or name (by dAclVlanAccSu… |
| 1.3.6.1.4.1.171.14.28.1.6.2 | TabledAclVlanFilterTable | not-accessible | current | The table represents a list of VLAN access map configuration. |
| 1.3.6.1.4.1.171.14.28.1.6.2.1 | RowdAclVlanFilterEntry | not-accessible | current | An entry in dAclVlanFilterTable contains vlan-specific VLAN access map association. |
| 1.3.6.1.4.1.171.14.28.1.6.2.1.1 | ColumndAclVlanFilterVlanId | not-accessible | current | Indicates the VLAN ID of the entry. |
| 1.3.6.1.4.1.171.14.28.1.6.2.1.2 | ColumndAclVlanFilterRowStatus | read-create | current | The row status variable, used according to installation and removal conventions for conceptual rows. |
| 1.3.6.1.4.1.171.14.28.1.6.2.1.3 | ColumndAclVlanFilterVlanAccMapName | read-create | current | The name of the access list to be applied for the VLAN. NULL value indicates the access list is not specified. |
| 1.3.6.1.4.1.171.14.28.1.6.3 | TabledAclVlanAccessMapTable | not-accessible | current | The table contains a list of VLAN access map configuration. |
| 1.3.6.1.4.1.171.14.28.1.6.3.1 | RowdAclVlanAccessMapEntry | not-accessible | current | An entry is defined dAclVlanAccessMapTable. |
| 1.3.6.1.4.1.171.14.28.1.6.3.1.1 | ColumndAclVlanAccessMapCounterEnabled | read-write | current | This object indicates the counter state of the VLAN access map is enabled('true') or disabled('false'). The counter state setting just for the all VLAN interfa… |
| 1.3.6.1.4.1.171.14.28.1.6.3.1.2 | ColumndAclVlanAccessMapClearStatAction | read-create | current | This object is used to clear statistics of the VLAN access map when set to 'clear'. No action is taken if this object is set to 'noOp'. The 'clear' action just… |
| 1.3.6.1.4.1.171.14.28.1.7 | NodedAclCounter | |||
| 1.3.6.1.4.1.171.14.28.1.7.1 | TabledAclAccessGroupCounterTable | not-accessible | current | This table maintains counter information associated with a specific access list rule in the access rule table. Please refer to the dAclMacAccessRuleTable, dAcl… |
| 1.3.6.1.4.1.171.14.28.1.7.1.1 | RowdAclAccessGroupCounterEntry | not-accessible | current | An entry is defined dAclAccessGroupCounterTable. |
| 1.3.6.1.4.1.171.14.28.1.7.1.1.1 | ColumndAclAccessGroupCounterAccListId | not-accessible | current | The ID of an access list which access group counter enabled. the access list was defined by the tables: dAclMacAccessListTable, dAclIpAccessListTable, dAclIPv6… |
| 1.3.6.1.4.1.171.14.28.1.7.1.1.2 | ColumndAclAccessGroupCounterAccRuleSn | not-accessible | current | Specifies the sequence number of this rule entry as related to the dAclAccessGroupCounterAccListId. |
| 1.3.6.1.4.1.171.14.28.1.7.1.1.3 | ColumndAclAccessGroupCounterIngressStat | read-only | current | This object indicates the total number of matched packets for the access rule applied on inbound of all interface in dAclMacAccessGroupTable, dAclIpAccessGroup… |
| 1.3.6.1.4.1.171.14.28.1.7.1.1.4 | ColumndAclAccessGroupCounterEgressStat | read-only | current | This object indicates the total number of matched packets for the access rule applied on outbound of all interface in dAclMacAccessGroupTable, dAclIpAccessGrou… |
| 1.3.6.1.4.1.171.14.28.1.7.2 | TabledAclVlanFilterCounterTable | not-accessible | current | This table maintains counter information associated with a specific access sub map in the dAclVlanSubMapTable. |
| 1.3.6.1.4.1.171.14.28.1.7.2.1 | RowdAclVlanFilterCounterEntry | not-accessible | current | An entry is defined dAclVlanFilterCounterTable. |
| 1.3.6.1.4.1.171.14.28.1.7.2.1.1 | ColumndAclVlanFilterCounterAccMapName | not-accessible | current | The name of a VLAN access map which counter enabled. the VLAN access map was defined by the dAclVlanSubMapTable. |
| 1.3.6.1.4.1.171.14.28.1.7.2.1.2 | ColumndAclVlanFilterCounterSubMapSeq | not-accessible | current | Indicates the sequence number of a VLAN access sub map. the vlan sub map sequence number was defined by the dAclVlanSubMapTable. |
| 1.3.6.1.4.1.171.14.28.1.7.2.1.3 | ColumndAclVlanFilterCounterStatistics | read-only | current | This object indicates the total number of matched packets for the sub map that applied on all VLAN interface in dAclVlanFilterTable. |
| 1.3.6.1.4.1.171.14.28.2 | NodedAclMIBConformance | |||
| 1.3.6.1.4.1.171.14.28.2.1 | NodedAclCompliances | |||
| 1.3.6.1.4.1.171.14.28.2.1.1 | CompliancedAclCompliance | current | The compliance statement for entities which implement the DLINKSW-ACL-MIB. | |
| 1.3.6.1.4.1.171.14.28.2.2 | NodedAclGroups | |||
| 1.3.6.1.4.1.171.14.28.2.2.1 | GroupdAclGenGroup | current | A collection of objects providing general access list configuration. | |
| 1.3.6.1.4.1.171.14.28.2.2.2 | GroupdAclMacGroup | current | A collection of objects providing MAC access list configuration. | |
| 1.3.6.1.4.1.171.14.28.2.2.3 | GroupdAclIpGroup | current | A collection of objects providing IP access list configuration. | |
| 1.3.6.1.4.1.171.14.28.2.2.4 | GroupdAclIPv6Group | current | A collection of objects providing IPv6 access list configuration. | |
| 1.3.6.1.4.1.171.14.28.2.2.5 | GroupdAclExpertGroup | current | A collection of objects providing extended expert access list configuration. | |
| 1.3.6.1.4.1.171.14.28.2.2.6 | GroupdAclVlanFilterGroup | current | A collection of objects providing VLAN access map configuration. | |
| 1.3.6.1.4.1.171.14.28.2.2.7 | GroupdAclCounterGroup | current | A collection of objects providing ACL counter information. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DlinkAclPortOperatorType | INTEGER { none(1), eq(2), gt(3), lt(4), neq(5), range(6), mask(7) } | current | The type of UDP/TCP port operator indicates how a packet's TCP/UDP source or destination port number is compared. none(1) - No comparison. eq (2)- equal gt (3)- greater than. lt (4)- less than. neq(5)- not equal range(6… |
| DlinkAclRuleType | INTEGER { permit(1), deny(2), deny-cpu(3) } | current | The action type when the packets match the access profile. permit(1)- Specifies that packets that match the access rule are permitted to be forwarded by the switch. deny(2) - Specifies that packets that match the access… |
| TcpFlag | BITS { urgent(0), acknowledge(1), push(2), reset(3), synchronize(4), finish (5) } | current | The TCP flag fields. Each bit defined as follow: urgent(0) - urgent. acknowledge(1) - acknowledge. push(2) - push, reset(3) - reset. synchronize(4) - synchronize. finish (5) - finish. |