DLINKSW-CPU-PROTECT-MIB
36 objects
The MIB module for managing CPU protection.
Imported Objects
| DLINK-ID-REC-MIB | dlinkIndustrialCommon |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter64 Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.14.19 | IdentitydlinkSwCpuProtectMIB | The MIB module for managing CPU protection. | ||
| 1.3.6.1.4.1.171.14.19.0 | NodedCpuProtectMIBNotifications | |||
| 1.3.6.1.4.1.171.14.19.1 | NodedCpuProtectMIBObjects | |||
| 1.3.6.1.4.1.171.14.19.1.2 | NodedCpuProtectMIBObjectsCtrl | |||
| 1.3.6.1.4.1.171.14.19.1.2.1 | TabledCpuProtectProtoRateLimitTable | not-accessible | current | The object configure the rate-limit of traffic destined to CPU based on protocol type. |
| 1.3.6.1.4.1.171.14.19.1.2.1.1 | RowdCpuProtectProtoRateLimitEntry | not-accessible | current | The object configures rate-limit control based on a specific protocol type. |
| 1.3.6.1.4.1.171.14.19.1.2.1.1.1 | ColumndCpuProtectProtoRLType | not-accessible | current | This object indicates the protocol type. |
| 1.3.6.1.4.1.171.14.19.1.2.1.1.2 | ColumndCpuProtectProtoRLRate | read-create | current | This object indicates the rate-limit of the specific protocol type. The value of -1 has the special meaning of identifying that there is no rate-limit of the s… |
| 1.3.6.1.4.1.171.14.19.1.2.1.1.3 | ColumndCpuProtectProtoRLClearCounter | read-create | current | This object is used to reset the counter of the specific protocol type when set to 'clear'. No action is taken if this object is set to 'noOp'. When read, the … |
| 1.3.6.1.4.1.171.14.19.1.2.2 | TabledCpuProtectSubIntfRLTable | not-accessible | current | This table consists of the rate-limit information of the sub-interface. |
| 1.3.6.1.4.1.171.14.19.1.2.2.1 | RowdCpuProtectSubIntfRLEntry | not-accessible | current | The object configure rate-limit control based on a specific sub-interface. |
| 1.3.6.1.4.1.171.14.19.1.2.2.1.1 | ColumndCpuProtectSubIntfRLType | not-accessible | current | This object indicates the type of sub-interface. |
| 1.3.6.1.4.1.171.14.19.1.2.2.1.2 | ColumndCpuProtectSubIntfRLRate | read-create | current | This object indicates the rate-limit of the specific sub-interface. The value of -1 has the special meaning of identifying that there is no rate-limit of the s… |
| 1.3.6.1.4.1.171.14.19.1.2.2.1.3 | ColumndCpuProtectSubIntfRLClearCounter | read-create | current | This object is used to reset the counter of the specific sub-interface when set to 'clear'. No action is taken if this object is set to 'noOp'. When read, the … |
| 1.3.6.1.4.1.171.14.19.1.3 | NodedCpuProtectMIBObjectsCounters | |||
| 1.3.6.1.4.1.171.14.19.1.3.1 | TabledCpuProtectProtoRLCntTable | not-accessible | current | This table consists of the traffic statistics by protocol type. |
| 1.3.6.1.4.1.171.14.19.1.3.1.1 | RowdCpuProtectProtoRLCntEntry | not-accessible | current | The per unit/slot traffic statistics about a protocol type. Objects in this table are read-only and appear automatically whenever the value of dCpuProtectProto… |
| 1.3.6.1.4.1.171.14.19.1.3.1.1.1 | ColumndCpuProtectProtoRLCntType | not-accessible | current | This object indicates the Protocol type. |
| 1.3.6.1.4.1.171.14.19.1.3.1.1.2 | ColumndCpuProtectProtoRLCntUnitID | not-accessible | current | This object indicates the unit/slot ID (for a chassis device) or unit number (for stacking device). For a standalone device, 0 is used for UnitID. |
| 1.3.6.1.4.1.171.14.19.1.3.1.1.3 | ColumndCpuProtectProtoRLCntTotalCnt | read-only | current | This object indicates the counter which counts the packets received by CPU (per unit/slot) for the protocol type. |
| 1.3.6.1.4.1.171.14.19.1.3.1.1.4 | ColumndCpuProtectProtoRLCntDropCnt | read-only | current | This object indicates the counter which counts the dropped packets due to exceeding the configured rate-limit. |
| 1.3.6.1.4.1.171.14.19.1.3.2 | TabledCpuProtectSubIntfRLCounterTable | not-accessible | current | This table consists of the traffic statistics by sub-interface. |
| 1.3.6.1.4.1.171.14.19.1.3.2.1 | RowdCpuProtectSubIntfRLCounterEntry | not-accessible | current | The per unit traffic statistics about a sub-interface. Objects in this table are read-only and appear automatically whenever the value of dCpuProtectSubIntfRLR… |
| 1.3.6.1.4.1.171.14.19.1.3.2.1.1 | ColumndCpuProtectSubIntfRLCntType | not-accessible | current | This object indicates the type of sub-interface. |
| 1.3.6.1.4.1.171.14.19.1.3.2.1.2 | ColumndCpuProtectSubIntfRLCntUnitID | not-accessible | current | This object indicates the slot (for a chassis device) or unit number (for stacking device). For a standalone device, 0 is used for UnitID. |
| 1.3.6.1.4.1.171.14.19.1.3.2.1.3 | ColumndCpuProtectSubIntfRLCntTotalCnt | read-only | current | This object indicates the counter which counts the packets received by CPU (per unit/slot) for the subinterface. |
| 1.3.6.1.4.1.171.14.19.1.3.2.1.4 | ColumndCpuProtectSubIntfRLCntDropCnt | read-only | current | This object indicates the counter which counts the dropped packets due to exceeding the configured rate-limit. |
| 1.3.6.1.4.1.171.14.19.2 | NodedCpuProtectMIBConformance | |||
| 1.3.6.1.4.1.171.14.19.2.1 | NodedCpuProtectMIBCompliances | |||
| 1.3.6.1.4.1.171.14.19.2.1.1 | CompliancedCpuProtectMIBCompliance | current | The compliance statement for entities which implement the DLINKSW-CPU-PROTECT-MIB. | |
| 1.3.6.1.4.1.171.14.19.2.2 | NodedCpuProtectMIBGroups | |||
| 1.3.6.1.4.1.171.14.19.2.2.1 | GroupdCpuProtectProtoGroup | current | A collection of objects providing the configuration or statistics about the rate-limit of traffic destined to CPU by protocol type. | |
| 1.3.6.1.4.1.171.14.19.2.2.2 | GroupdCpuProtectSubIntfGroup | current | A collection of objects providing the configuration or statistics about the rate-limit of traffic destined to CPU by sub-interface type. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CpuProtectProtocolType | INTEGER { arp(1), bgp(2), dhcp(3), dhcpv6(4), dns(5), dot1x(6), dvmrp(7), gvrp(8), icmp(9), icmpv6Ndp(10), icmpv6Other(11), igmp(12), lacp(13), ntp(14), ospf(15), ospfv3(16), pim(17), pppoe(18), rip(19), ripng(20), snmp(21), ssh(22), stp(23), telnet(24), tftp(25), vrrp(26), web(27) } | current | Represents a protocol type. Note that a particular agent may support only certain protocol types. Thus, the valid values of this object are project dependent. An agent may respond with an error (e.g., 'inconsistentValue… |
| MaxRate | Integer32 (-1 | 0..65535) | current | The range for configuring rate-limit in packet per second (pps). Note that a particular agent may support different rate range. Thus, the valid values are project dependent. An agent may respond with an error (e.g., 'in… |
| UnitID | Integer32 (0 | 1..64) | current | This object indicates the slot (for a chassis device) or unit number (for stacking device). For a standalone device, 0 is used for UnitID. Note that a particular agent may support different range of unit/slot ID. Thus, … |