DLINKSW-DDM-MIB
65 objects
This MIB module defines objects for DDM.
Imported Objects
| DLINK-ID-REC-MIB | dlinkIndustrialCommon |
| IF-MIB | ifIndex InterfaceIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.14.72 | IdentitydlinkSwDdmMIB | This MIB module defines objects for DDM. | ||
| 1.3.6.1.4.1.171.14.72.0 | NodedDdmMIBNotifications | |||
| 1.3.6.1.4.1.171.14.72.0.1 | NotificationdDdmAlarmTrap | current | The trap is sent when dDdmNotifyEnable is 'true' and an abnormal alarm situation occurs or recovers from an abnormal alarm situation to normal status. | |
| 1.3.6.1.4.1.171.14.72.0.2 | NotificationdDdmWarningTrap | current | The trap is sent when dDdmNotifyEnable is 'true' and an abnormal warning situation occurs or recovers from an abnormal warning situation to normal status. | |
| 1.3.6.1.4.1.171.14.72.1 | NodedDdmMIBObjects | |||
| 1.3.6.1.4.1.171.14.72.1.1 | NodedDdmCtrl | |||
| 1.3.6.1.4.1.171.14.72.1.1.1 | ScalardDdmNotifyEnable | read-write | current | This object indicates whether a specified notification is enabled or not. If a bit corresponding to a notification is set to 1, then the specified notification… |
| 1.3.6.1.4.1.171.14.72.1.2 | NodedDdmIfCtrl | |||
| 1.3.6.1.4.1.171.14.72.1.2.1 | TabledDdmIfCfgTable | not-accessible | current | This table contains a list of interface-specific DDM configuration. |
| 1.3.6.1.4.1.171.14.72.1.2.1.1 | RowdDdmIfCfgEntry | not-accessible | current | An entry manages DDM state and action on an interface. |
| 1.3.6.1.4.1.171.14.72.1.2.1.1.1 | ColumndDdmIfCfgEnabled | read-write | current | This object indicates the status of optical transceiver-monitoring function for a SFP port. When a SFP with transceiver-monitoring capability is plugged in a p… |
| 1.3.6.1.4.1.171.14.72.1.2.1.1.2 | ColumndDdmShutdownLevel | read-write | current | This object indicates the abnormal level which causes a port enter into errDisabled state. A value of 'none' indicates the shutdown action is disabled. |
| 1.3.6.1.4.1.171.14.72.1.3 | NodedDdmThresholdMgmt | |||
| 1.3.6.1.4.1.171.14.72.1.3.1 | TabledDdmThresholdCfgTable | not-accessible | current | This table contains a list of interface-specific threshold configuration for DDM. |
| 1.3.6.1.4.1.171.14.72.1.3.1.1 | RowdDdmThresholdCfgEntry | not-accessible | current | An entry in this table conists of one threshold configuration on an interface. An entry is created/removed when a configuration is added/deleted. |
| 1.3.6.1.4.1.171.14.72.1.3.1.1.1 | ColumndDdmThresholdComponent | not-accessible | current | This object indicates the monitoring type. Note: Either txPowerMw(4) or txPowerDbm(5) can be configured on an interface. Either rxPowerMw(6) or rxPowerDbm(7) c… |
| 1.3.6.1.4.1.171.14.72.1.3.1.1.2 | ColumndDmThresholdAbnormalLevel | not-accessible | current | This object indicates the threshold type. |
| 1.3.6.1.4.1.171.14.72.1.3.1.1.3 | ColumndDdmThresholdCfgValue | read-create | current | This object indicates the configured threshold. The value is interpreted within the context of dDdmThresholdComponent and dDmThresholdAbnormalLevel in the same… |
| 1.3.6.1.4.1.171.14.72.1.3.1.1.4 | ColumndDdmThresholdCfgRowStatus | read-create | current | The status of this conceptual row. |
| 1.3.6.1.4.1.171.14.72.1.4 | NodedDdmInfo | |||
| 1.3.6.1.4.1.171.14.72.1.4.1 | TabledDdmIfInfoTable | not-accessible | current | This table contains a list of information about current operating parameters of interfaces. Only the applicable interfaces (i.e.SFP module with DDM capability … |
| 1.3.6.1.4.1.171.14.72.1.4.1.1 | RowdDdmIfInfoEntry | not-accessible | current | An entry appears in this table contains current operating parameters for transceiver monitoring of a port. |
| 1.3.6.1.4.1.171.14.72.1.4.1.1.1 | ColumndDdmIfInfoCurrentTemperature | read-only | current | This object indicates the current temperature in unit of 'milli-degrees Celsius' on the interface. |
| 1.3.6.1.4.1.171.14.72.1.4.1.1.2 | ColumndDdmIfInfoTemperatureState | read-only | current | This object indicates the state of current temperature. |
| 1.3.6.1.4.1.171.14.72.1.4.1.1.3 | ColumndDdmIfInfoHighAlarmTemperature | read-only | current | This object indicates the high alarm threshold, when the operating temperature rises above this value, it indicates an alarm status. The value is in unit of 'm… |
| 1.3.6.1.4.1.171.14.72.1.4.1.1.4 | ColumndDdmIfInfoHighWarnTemperature | read-only | current | This object indicates the high warning threshold, when the operating temperature rises above this value, it indicates a warning status. The value is in unit of… |
| 1.3.6.1.4.1.171.14.72.1.4.1.1.5 | ColumndDdmIfInfoLowWarnTemperature | read-only | current | This object indicates the low warning threshold, when the operating temperature falls below this value, it indicates a warning status. The value is in unit of … |
| 1.3.6.1.4.1.171.14.72.1.4.1.1.6 | ColumndDdmIfInfoLowAlarmTemperature | read-only | current | This object indicates the low alarm threshold, when the operating temperature falls below this value, it indicates an alarm status. The value is in unit of 'mi… |
| 1.3.6.1.4.1.171.14.72.1.4.1.1.7 | ColumndDdmIfInfoCurrentVoltage | read-only | current | This object indicates the current voltage in unit of 'centi-Volt' on the interface. |
| 1.3.6.1.4.1.171.14.72.1.4.1.1.8 | ColumndDdmIfInfoVoltageState | read-only | current | This object indicates the state of current voltage. |
| 1.3.6.1.4.1.171.14.72.1.4.1.1.9 | ColumndDdmIfInfoHighAlarmVoltage | read-only | current | This object indicates the high alarm threshold, when the operating voltage rises above this value, it indicates an alarm status. The value is in unit of 'centi… |
| 1.3.6.1.4.1.171.14.72.1.4.1.1.10 | ColumndDdmIfInfoHighWarnVoltage | read-only | current | This object indicates the high warning threshold, when the operating voltage rises above this value, it indicates a warning status. The value is in unit of 'ce… |
| 1.3.6.1.4.1.171.14.72.1.4.1.1.11 | ColumndDdmIfInfoLowWarnVoltage | read-only | current | This object indicates the low warning threshold, when the operating voltage falls below this value, it indicates a warning status. The value is in unit of 'cen… |
| 1.3.6.1.4.1.171.14.72.1.4.1.1.12 | ColumndDdmIfInfoLowAlarmVoltage | read-only | current | This object indicates the low alarm threshold, when the operating voltage falls below this value, it indicates an alarm status. The value is in unit of 'centi-… |
| 1.3.6.1.4.1.171.14.72.1.4.1.1.13 | ColumndDdmIfInfoCurrentBiasCurrent | read-only | current | This object indicates the current bias current in unit of 'milli-amperes' on the interface. |
| 1.3.6.1.4.1.171.14.72.1.4.1.1.14 | ColumndDdmIfInfoBiasCurrentState | read-only | current | This object indicates the state of current BiasCurrent. |
| 1.3.6.1.4.1.171.14.72.1.4.1.1.15 | ColumndDdmIfInfoHighAlarmBiasCurrent | read-only | current | This object indicates the high alarm threshold, when the operating bias current rises above this value, it indicates an alarm status. The value is in unit of '… |
| 1.3.6.1.4.1.171.14.72.1.4.1.1.16 | ColumndDdmIfInfoHighWarnBiasCurrent | read-only | current | This object indicates the high warning threshold, when the operating bias current rises above this value, it indicates a warning status. The value is in unit o… |
| 1.3.6.1.4.1.171.14.72.1.4.1.1.17 | ColumndDdmIfInfoLowWarnBiasCurrent | read-only | current | This object indicates the low warning threshold, when the operating bias current falls below this value, it indicates a warning status. The value is in unit of… |
| 1.3.6.1.4.1.171.14.72.1.4.1.1.18 | ColumndDdmIfInfoLowAlarmBiasCurrent | read-only | current | This object indicates the low alarm threshold, when the operating bias current falls below this value, it indicates an alarm status. The value is in unit of 'm… |
| 1.3.6.1.4.1.171.14.72.1.4.1.1.19 | ColumndDdmIfInfoCurrentTxPower | read-only | current | This object indicates the current output power in unit of 'tenths of a microwatt' on the interface. |
| 1.3.6.1.4.1.171.14.72.1.4.1.1.20 | ColumndDdmIfInfoTxPowerState | read-only | current | This object indicates the state of current output power. |
| 1.3.6.1.4.1.171.14.72.1.4.1.1.21 | ColumndDdmIfInfoHighAlarmTxPower | read-only | current | This object indicates the high alarm threshold, when the operating output power rises above this value, it indicates an alarm status. The value is in unit of '… |
| 1.3.6.1.4.1.171.14.72.1.4.1.1.22 | ColumndDdmIfInfoHighWarnTxPower | read-only | current | This object indicates the high warning threshold, when the operating output power rises above this value, it indicates a warning status. The value is in unit o… |
| 1.3.6.1.4.1.171.14.72.1.4.1.1.23 | ColumndDdmIfInfoLowWarnTxPower | read-only | current | This object indicates the low warning threshold, when the operating output power falls below this value, it indicates a warning status. The value is in unit of… |
| 1.3.6.1.4.1.171.14.72.1.4.1.1.24 | ColumndDdmIfInfoLowAlarmTxPower | read-only | current | This object indicates the low alarm threshold, when the operating output power falls below this value, it indicates an alarm status. The value is in unit of 't… |
| 1.3.6.1.4.1.171.14.72.1.4.1.1.25 | ColumndDdmIfInfoCurrentRxPower | read-only | current | This object indicates the current input power in unit of 'tenths of a microwatt' on the interface. |
| 1.3.6.1.4.1.171.14.72.1.4.1.1.26 | ColumndDdmIfInfoRxPowerState | read-only | current | This object indicates the state of current input power. |
| 1.3.6.1.4.1.171.14.72.1.4.1.1.27 | ColumndDdmIfInfoHighAlarmRxPower | read-only | current | This object indicates the high alarm threshold, when the operating input power rises above this value, it indicates an alarm status. The value is in unit of 't… |
| 1.3.6.1.4.1.171.14.72.1.4.1.1.28 | ColumndDdmIfInfoHighWarnRxPower | read-only | current | This object indicates the high warning threshold, when the operating input power rises above this value, it indicates a warning status. The value is in unit of… |
| 1.3.6.1.4.1.171.14.72.1.4.1.1.29 | ColumndDdmIfInfoLowWarnRxPower | read-only | current | This object indicates the low warning threshold, when the operating input power falls below this value, it indicates a warning status. The value is in unit of … |
| 1.3.6.1.4.1.171.14.72.1.4.1.1.30 | ColumndDdmIfInfoLowAlarmRxPower | read-only | current | This object indicates the low alarm threshold, when the operating input power falls below this value, it indicates an alarm status. The value is in unit of 'te… |
| 1.3.6.1.4.1.171.14.72.1.5 | NodedDdmNotifyInfo | |||
| 1.3.6.1.4.1.171.14.72.1.5.1 | ScalardDdmNotifyInfoIfIndex | accessible-for-notify | current | This object is used by dDdmAlarmTrap and dDdmWarningTrap to indicate the ifIndex on which the monitoring value rises above or falls below the corresponding thr… |
| 1.3.6.1.4.1.171.14.72.1.5.2 | ScalardDdmNotifyInfoComponent | accessible-for-notify | current | This object is used by dDdmAlarmTrap and dDdmWarningTrap to indicate the abnormal component. |
| 1.3.6.1.4.1.171.14.72.1.5.3 | ScalardDdmNotifyInfoAbnormalLevel | accessible-for-notify | current | This object is used by dDdmAlarmTrap and dDdmWarningTrap to indicate the abnormal level. |
| 1.3.6.1.4.1.171.14.72.1.5.4 | ScalardDdmNotifyInfoThresholdExceedOrRecover | accessible-for-notify | current | This object is used by dDdmAlarmTrap and dDdmWarningTrap to indicate the GBIC is exceeding its threshold or recover to normal status. |
| 1.3.6.1.4.1.171.14.72.2 | NodedDdmMIBConformance | |||
| 1.3.6.1.4.1.171.14.72.2.1 | NodedDdmCompliances | |||
| 1.3.6.1.4.1.171.14.72.2.1.1 | CompliancedDdmCompliance | current | The compliance statement for entities which implement the DLINKSW-DDM-MIB. | |
| 1.3.6.1.4.1.171.14.72.2.2 | NodedDdmGroups | |||
| 1.3.6.1.4.1.171.14.72.2.2.1 | GroupdDdmInfoGroup | current | A collection of objects provides DDM operating information. | |
| 1.3.6.1.4.1.171.14.72.2.2.2 | GroupdDdmCfgGroup | current | A collection of objects provides DDM configuration. | |
| 1.3.6.1.4.1.171.14.72.2.2.3 | GroupdDdmNotifyGroup | current | The collection of notifications used for DDM. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DlinkThresholdState | INTEGER { normal(0), higherAlarm(1), higherWarning(2), lowerWarning(3), lowerAlarm(4) } | current | Represents the state of a current monitoring value. Valid values are: normal(0): the current value is within normal range. higherAlarm(1): the current value is higher than the high alarm threshold. higherWarning(2): the… |