DLINKSW-ENTITY-EXT-MIB
76 objects
This MIB module provides essential information about the system and defines the managed objects that support the monitoring of alarms generated by physical entities, including temperature sensors, fans and power supplies.
Imported Objects
| DLINK-ID-REC-MIB | dlinkIndustrialCommon |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.14.5 | IdentitydlinkSwEntityExtMIB | This MIB module provides essential information about the system and defines the managed objects that support the monitoring of alarms generated by physical ent… | ||
| 1.3.6.1.4.1.171.14.5.0 | NodedEntityExtNotifications | |||
| 1.3.6.1.4.1.171.14.5.0.1 | NotificationdEntityExtFanStatusChg | current | This trap indicates a fan fails (dEntityExtEnvFanStatus is 'fault') or recovers (dEntityExtEnvFanStatus is 'ok'). | |
| 1.3.6.1.4.1.171.14.5.0.2 | NotificationdEntityExtThermalStatusChg | current | This trap indicates a thermal alarms (dEntityExtEnvTempStatus is 'abnormal') or recovers (dEntityExtEnvTempStatus is 'ok'). | |
| 1.3.6.1.4.1.171.14.5.0.3 | NotificationdEntityExtPowerStatusChg | current | This trap indicates a power module fails, recovers or is removed. | |
| 1.3.6.1.4.1.171.14.5.0.4 | NotificationdEntityExtAirFlowChg | current | This trap is triggered when the air flow status is changed from 'ok' to 'abnormal' and vice versa. dEntityExtEnvAirFlowStatus indicates the current (new) fan a… | |
| 1.3.6.1.4.1.171.14.5.0.5 | NotificationdEntityExtFactoryResetButton | current | This trap is triggered when the factory reset button was pressed. | |
| 1.3.6.1.4.1.171.14.5.1 | NodedEntityExtObjects | |||
| 1.3.6.1.4.1.171.14.5.1.1 | NodedEntityExtEnvObjects | |||
| 1.3.6.1.4.1.171.14.5.1.1.1 | TabledEntityExtEnvTempTable | not-accessible | current | The table consists of a list of temperature information. |
| 1.3.6.1.4.1.171.14.5.1.1.1.1 | RowdEntityExtEnvTempEntry | not-accessible | current | An entry represents the temperature status of a testpoint. |
| 1.3.6.1.4.1.171.14.5.1.1.1.1.1 | ColumndEntityExtEnvTempUnitId | not-accessible | current | This object indicates the unit (stacking device) or slot (chassis device) ID at which the testpoint is located. |
| 1.3.6.1.4.1.171.14.5.1.1.1.1.2 | ColumndEntityExtEnvTempIndex | not-accessible | current | This object is used to uniquely identify the testpoint within a unit/slot. This index is for SNMP purposes only, and has no intrinsic meaning. |
| 1.3.6.1.4.1.171.14.5.1.1.1.1.3 | ColumndEntityExtEnvTempDescr | read-only | current | This object provides human-sensible identification for the testpoint. e.g. 'Inlet', 'Center', 'Outlet'. |
| 1.3.6.1.4.1.171.14.5.1.1.1.1.4 | ColumndEntityExtEnvTempCurrent | read-only | current | This object indicates the current measurement of the testpoint. |
| 1.3.6.1.4.1.171.14.5.1.1.1.1.5 | ColumndEntityExtEnvTempThresholdLow | read-write | current | The object indicates the minimum acceptable reading of the testpoint in degrees Celsius. |
| 1.3.6.1.4.1.171.14.5.1.1.1.1.6 | ColumndEntityExtEnvTempThresholdHigh | read-write | current | The object indicates the maximum acceptable reading of the testpoint in degrees Celsius. |
| 1.3.6.1.4.1.171.14.5.1.1.1.1.7 | ColumndEntityExtEnvTempStatus | read-only | current | The object indicates the current temperature is over the thresholds or not. 'abnormal' indicates the temperature is over the thresholds. 'ok' indicates the tem… |
| 1.3.6.1.4.1.171.14.5.1.1.2 | TabledEntityExtEnvFanTable | not-accessible | current | The table is used to display the status of fans. |
| 1.3.6.1.4.1.171.14.5.1.1.2.1 | RowdEntityExtEnvFanEntry | not-accessible | current | An entry represents a fan status. |
| 1.3.6.1.4.1.171.14.5.1.1.2.1.1 | ColumndEntityExtEnvFanUnitId | not-accessible | current | This object indicates the unit (stacking device) or slot (chassis device) ID at which the fan is located. |
| 1.3.6.1.4.1.171.14.5.1.1.2.1.2 | ColumndEntityExtEnvFanIndex | not-accessible | current | This object is used to uniquely identify the fan within a unit/slot. This index is for SNMP purposes only, and has no intrinsic meaning. |
| 1.3.6.1.4.1.171.14.5.1.1.2.1.3 | ColumndEntityExtEnvFanDescr | read-only | current | This object provides human-sensible identification for the fan. e.g. 'Left 1' for the first fan on the left. |
| 1.3.6.1.4.1.171.14.5.1.1.2.1.4 | ColumndEntityExtEnvFanStatus | read-only | current | This object indicates the fan status. |
| 1.3.6.1.4.1.171.14.5.1.1.3 | TabledEntityExtEnvPowerTable | not-accessible | current | The table is used to display the status of the power modules. |
| 1.3.6.1.4.1.171.14.5.1.1.3.1 | RowdEntityExtEnvPowerEntry | not-accessible | current | An entry contains the information of a power module. |
| 1.3.6.1.4.1.171.14.5.1.1.3.1.1 | ColumndEntityExtEnvPowerUnitId | not-accessible | current | This object indicates the unit (stacking device) or slot (chassis device) ID at which the power module is located. |
| 1.3.6.1.4.1.171.14.5.1.1.3.1.2 | ColumndEntityExtEnvPowerIndex | not-accessible | current | This object indicates the ID of the power module. This object is used to uniquely identify the power module. This index is for SNMP purposes only, and has no i… |
| 1.3.6.1.4.1.171.14.5.1.1.3.1.3 | ColumndEntityExtEnvPowerDescr | read-only | current | This object provides human-sensible information for the power module. e.g. '#1 (internal)', '#2 (external)'. |
| 1.3.6.1.4.1.171.14.5.1.1.3.1.4 | ColumndEntityExtEnvPowerUsedPower | read-only | current | This object indicates the amount of the power that has been allocated. |
| 1.3.6.1.4.1.171.14.5.1.1.3.1.5 | ColumndEntityExtEnvPowerMaxPower | read-only | current | This object indicates maximum power which the power module can supply. |
| 1.3.6.1.4.1.171.14.5.1.1.3.1.6 | ColumndEntityExtEnvPowerStatus | read-only | current | This object indicates the status of the power. |
| 1.3.6.1.4.1.171.14.5.1.1.4 | TabledEntityExtEnvAirFlowTable | not-accessible | current | The table is used to display the status of the air flow function. |
| 1.3.6.1.4.1.171.14.5.1.1.4.1 | RowdEntityExtEnvAirFlowEntry | not-accessible | current | An entry contains the information of the air flow function. |
| 1.3.6.1.4.1.171.14.5.1.1.4.1.1 | ColumndEntityExtEnvAirFlowUnitId | not-accessible | current | This object indicates the unit (stacking device) or slot (chassis device) ID at which the air flow module is located. |
| 1.3.6.1.4.1.171.14.5.1.1.4.1.2 | ColumndEntityExtEnvAirFlowStatus | read-only | current | This object indicates the status of the air flow. The fans' air flow direction must match the system's air flow direction to form an integrated air flow. For e… |
| 1.3.6.1.4.1.171.14.5.1.2 | NodedEntityExtEnvTrap | |||
| 1.3.6.1.4.1.171.14.5.1.2.1 | ScalardEntityExtEnvNotifyEnable | read-write | current | This object indicates whether a specified notification is enabled or not. If a bit corresponding to a notification is set to 1, then the specified notification… |
| 1.3.6.1.4.1.171.14.5.1.3 | TabledEntityExtUnitTable | not-accessible | current | The table is used to display information of units. |
| 1.3.6.1.4.1.171.14.5.1.3.1 | RowdEntityExtUnitEntry | not-accessible | current | An entry contains essential information of a unit. |
| 1.3.6.1.4.1.171.14.5.1.3.1.1 | ColumndEntityExtUnitIndex | not-accessible | current | This object indicates the unit (stacking device) or slot (chassis device) ID. |
| 1.3.6.1.4.1.171.14.5.1.3.1.2 | ColumndEntityExtUnitStatus | read-only | current | This object represents the status of the unit: ok(1) - This indicates the unit is okay. failed(2) - This indicates the unit fails due to some reason. empty(3) … |
| 1.3.6.1.4.1.171.14.5.1.3.1.3 | ColumndEntityExtUnitUpTime | read-only | current | This object provides the up time in units of seconds for the unit since it was last re-initialized. |
| 1.3.6.1.4.1.171.14.5.1.4 | TabledEntityExtMemoryUtilTable | not-accessible | current | The table is used to display memory utilization information. |
| 1.3.6.1.4.1.171.14.5.1.4.1 | RowdEntityExtMemoryUtilEntry | not-accessible | current | An entry contains memory utilization information. |
| 1.3.6.1.4.1.171.14.5.1.4.1.1 | ColumndEntityExtMemUtilUnitId | not-accessible | current | This object indicates the unit (stacking device) or slot (chassis device) ID. |
| 1.3.6.1.4.1.171.14.5.1.4.1.2 | ColumndEntityExtMemUtilType | not-accessible | current | The object indicates the memory type of the entry. |
| 1.3.6.1.4.1.171.14.5.1.4.1.3 | ColumndEntityExtMemUtilTotal | read-only | current | This object indicates the total memory size of the entry. |
| 1.3.6.1.4.1.171.14.5.1.4.1.4 | ColumndEntityExtMemUtilUsed | read-only | current | This object indicates the used memory size of the entry. |
| 1.3.6.1.4.1.171.14.5.1.4.1.5 | ColumndEntityExtMemUtilFree | read-only | current | This object indicates the free memory size of the entry. |
| 1.3.6.1.4.1.171.14.5.1.7 | TabledEntityExtCpuUtilTable | not-accessible | current | The table is used to display CPU utilization information. |
| 1.3.6.1.4.1.171.14.5.1.7.1 | RowdEntityExtCpuUtilEntry | not-accessible | current | An entry contains CPU information. |
| 1.3.6.1.4.1.171.14.5.1.7.1.1 | ColumndEntityExtCpuUtilUnitId | not-accessible | current | This object indicates the unit (stacking device) or slot (chassis device) ID. |
| 1.3.6.1.4.1.171.14.5.1.7.1.2 | ColumndEntityExtCpuUtilCpuID | not-accessible | current | This object is used to uniquely identify the CPU within a unit (multiprocessing system). |
| 1.3.6.1.4.1.171.14.5.1.7.1.3 | ColumndEntityExtCpuUtilFiveSeconds | read-only | current | This objects indicates the overall CPU busy percentage in the last 5 second period. The value will be between 0% (idle) and 100% (very busy). |
| 1.3.6.1.4.1.171.14.5.1.7.1.4 | ColumndEntityExtCpuUtilOneMinute | read-only | current | This objects indicates the overall CPU busy percentage in the last 1 minute period. The value will be between 0% (idle) and 100% (very busy). |
| 1.3.6.1.4.1.171.14.5.1.7.1.5 | ColumndEntityExtCpuUtilFiveMinutes | read-only | current | This objects indicates the overall CPU busy percentage in the last 5 minute period. The value will be between 0% (idle) and 100% (very busy). |
| 1.3.6.1.4.1.171.14.5.1.8 | TabledEntityExtVersionTable | not-accessible | current | The table is used to display version information of units. |
| 1.3.6.1.4.1.171.14.5.1.8.1 | RowdEntityExtVersionEntry | not-accessible | current | An entry contains version information of a unit. |
| 1.3.6.1.4.1.171.14.5.1.8.1.1 | ColumndEntityExtVersionUnitId | not-accessible | current | This object indicates the unit (stacking device) or slot (chassis device) ID. |
| 1.3.6.1.4.1.171.14.5.1.8.1.2 | ColumndEntityExtVersionBootloader | read-only | current | This object indicates the bootloader version of the unit. |
| 1.3.6.1.4.1.171.14.5.1.8.1.3 | ColumndEntityExtVersionRuntime | read-only | current | This object indicates the firmware version of one unit. |
| 1.3.6.1.4.1.171.14.5.2 | NodedEntityExtConformance | |||
| 1.3.6.1.4.1.171.14.5.2.1 | NodedEntityExtMIBCompliances | |||
| 1.3.6.1.4.1.171.14.5.2.1.1 | CompliancedEntityExtCompliance | read-only | current | The compliance statement for entities which implement the DLINKSW-ENTITY-EXT-MIB. |
| 1.3.6.1.4.1.171.14.5.2.2 | NodedEntityExtMIBGroups | |||
| 1.3.6.1.4.1.171.14.5.2.2.1 | GroupdEntityExtTempGroup | current | A collection of objects provides information of the system temperature. | |
| 1.3.6.1.4.1.171.14.5.2.2.2 | GroupdEntityExtFanGroup | current | A collection of objects providing informations of fans. | |
| 1.3.6.1.4.1.171.14.5.2.2.3 | GroupdEntityExtPowerGroup | current | A collection of objects providing information of power modules. | |
| 1.3.6.1.4.1.171.14.5.2.2.4 | GroupdEntityExtSystemInfoGroup | current | A collection of objects provides information of the system temperature. | |
| 1.3.6.1.4.1.171.14.5.2.2.5 | GroupdEntityExtGenericNotifInfoGroup | current | A collection of objects provides generic information for binding variables of notification. | |
| 1.3.6.1.4.1.171.14.5.2.2.6 | GroupdEntityExtFanNotifGroup | current | A collection of notifications for indicating the status change of fans. | |
| 1.3.6.1.4.1.171.14.5.2.2.7 | GroupdEntityExtThermalNotifGroup | current | A collection of notifications for indicating the status change of thermals. | |
| 1.3.6.1.4.1.171.14.5.2.2.8 | GroupdEntityExtPowerNotifGroup | current | A collection of notifications for indicating the status change of power module. | |
| 1.3.6.1.4.1.171.14.5.2.2.9 | GroupdEntityExtAirFlowNotifGroup | current | A collection of notifications for indicating the status change of the air flow. | |
| 1.3.6.1.4.1.171.14.5.2.2.10 | GroupdEntityExtFactoryResetButtonNotifGroup | current | A collection of notifications for indicating the factory reset button. |