DLINKSW-ERROR-DISABLE-MIB
34 objects
This MIB module defines objects for error disabled.
Imported Objects
| DLINK-ID-REC-MIB | dlinkIndustrialCommon |
| IF-MIB | InterfaceIndex |
| Q-BRIDGE-MIB | VlanId VlanIdOrNone |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.14.45 | IdentitydlinkSwErrDisableMIB | This MIB module defines objects for error disabled. | ||
| 1.3.6.1.4.1.171.14.45.0 | NodedErrDisableMIBNotifications | |||
| 1.3.6.1.4.1.171.14.45.0.1 | NotificationdErrDisNotifyPortDisabledAssert | current | The trap is sent when a port enters into error disabled state. | |
| 1.3.6.1.4.1.171.14.45.0.2 | NotificationdErrDisNotifyPortDisabledClear | current | The trap is sent when a port loop restarts after the interval time. | |
| 1.3.6.1.4.1.171.14.45.0.3 | NotificationdErrDisNotifyVlanDisabledAssert | current | The trap is sent when a Port with a VID loop occurs. | |
| 1.3.6.1.4.1.171.14.45.0.4 | NotificationdErrDisNotifyVlanDisabledClear | current | The trap is sent when a Port with a VID restarts after the interval time. | |
| 1.3.6.1.4.1.171.14.45.1 | NodedErrDisableMIBObjects | |||
| 1.3.6.1.4.1.171.14.45.1.1 | TabledErrDisRecoveryTable | not-accessible | current | This table contains the recovery mechanism for the features with error-disable functionality. Transceiver monitoring module (the DErrDisReasonID is 'ddm') can … |
| 1.3.6.1.4.1.171.14.45.1.1.1 | RowdErrDisRecoveryEntry | not-accessible | current | An entry is created for each feature which has error-disable functionality. |
| 1.3.6.1.4.1.171.14.45.1.1.1.1 | ColumndErrDisRecoveryIndex | not-accessible | current | This object indicates the cause of error-disable. |
| 1.3.6.1.4.1.171.14.45.1.1.1.2 | ColumndErrDisRecoveryEnable | read-write | current | This object specifies whether the system can automatically recover a system entity that has been disabled by the cause. |
| 1.3.6.1.4.1.171.14.45.1.1.1.3 | ColumndErrDisRecoveryInterval | read-write | current | Specifies the error-recovery time interval on specific cause to recover the port/interface from the error disabled situation. |
| 1.3.6.1.4.1.171.14.45.1.2 | ScalardErrDisIfStatusTableNum | read-only | current | Indicates the number of entries present in the dErrDisIfStatusTable. |
| 1.3.6.1.4.1.171.14.45.1.3 | TabledErrDisIfStatusTable | not-accessible | current | This table provides next recovery timeout information about an interface disabled by a feature. |
| 1.3.6.1.4.1.171.14.45.1.3.1 | RowdErrDisIfStatusEntry | not-accessible | current | An entry indicates next recovery timeout information about an interface or (interface, vlan) disabled by a feature. |
| 1.3.6.1.4.1.171.14.45.1.3.1.1 | ColumndErrDisIfStatusIfIndex | not-accessible | current | This object is the interface index of the interface disabled by a feature. |
| 1.3.6.1.4.1.171.14.45.1.3.1.2 | ColumndErrDisIfStatusVlanIndex | not-accessible | current | This object indicates the VLAN in the given interface that has been error-disabled. If the physical interface is error-disabled then the value of this object i… |
| 1.3.6.1.4.1.171.14.45.1.3.1.3 | ColumndErrDisIfStatusDisReasonIndex | not-accessible | current | This object indicates the reason which cause the interface disabled. |
| 1.3.6.1.4.1.171.14.45.1.3.1.4 | ColumndErrDisIfStatusTimeLeft | read-only | current | This object indicates the time left that the interface will be automatically recovered. Value 0xFFFFFFFF indicates the interface won't be automatically recover… |
| 1.3.6.1.4.1.171.14.45.1.4 | ScalardErrDisNotificationEnable | read-write | current | This object indicates whether a specified notification is enabled or not. If a bit corresponding to a notification is set to 1, then the specified notification… |
| 1.3.6.1.4.1.171.14.45.1.5 | ScalardErrDisNotifRate | read-write | current | Expressed in the number of notifications can be generated per minute. This object configures the rate-limit of SNMP Notification for errDisable feature. A valu… |
| 1.3.6.1.4.1.171.14.45.1.6 | NodedErrDisNotifyInfo | |||
| 1.3.6.1.4.1.171.14.45.1.6.1 | ScalardErrDisNotifyInfoPortIfIndex | accessible-for-notify | current | This object indicates the port number of error disabled port. |
| 1.3.6.1.4.1.171.14.45.1.6.2 | ScalardErrDisNotifyInfoLoopDetectedVID | accessible-for-notify | current | This object indicates the VLAN ID that has detected a loopback. |
| 1.3.6.1.4.1.171.14.45.1.6.3 | ScalardErrDisNotifyInfoReasonID | accessible-for-notify | current | This object indicates the condition which cause a port/vlan enter into error disabled state. |
| 1.3.6.1.4.1.171.14.45.2 | NodedErrDisableMIBConformance | |||
| 1.3.6.1.4.1.171.14.45.2.1 | NodedErrDisMIBCompliances | |||
| 1.3.6.1.4.1.171.14.45.2.1.1 | CompliancedErrDisMIBCompliance | current | The compliance statement for entities which implement the DLINKSW-ERROR-DISABLE-MIB. | |
| 1.3.6.1.4.1.171.14.45.2.2 | NodedErrDisMIBGroups | |||
| 1.3.6.1.4.1.171.14.45.2.2.1 | GroupdErrDisRecoveryCfgGroup | current | A collection of objects to configure the error recovery of the error-disable feature. | |
| 1.3.6.1.4.1.171.14.45.2.2.2 | GroupdErrDisIfStatusGroup | current | A collection of objects which indicate error-disable interface status. | |
| 1.3.6.1.4.1.171.14.45.2.2.3 | GroupdErrDisNotifyCfgGroup | current | A collection of objects to configure the error recovery of the error-disable feature. | |
| 1.3.6.1.4.1.171.14.45.2.2.4 | GroupdErrDisNotificationGroup | current | The collection of notifications used for monitoring ErrDisable status |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DErrDisReasonID | INTEGER { loopbackDetect(1), l2ptGuard(2), psecureViolation(3), stormControl(4), bpduProtect(5), arpRateLimit(6), dhcpRateLimit(7), ddm(8), scheduledShutdown(9), scheduledHibernation(10) } | current | An integer-value assigned to various conditions that can error disable a system entity. loopbackDetect: Loopback Detection l2ptGuard: L2 Protocol Tunneling. psecureViolation: Port Security violation. stormControl: (broa… |