DLINKSW-LBD-MIB
34 objects
This MIB module defines objects for loopback detection.
Imported Objects
| DLINK-ID-REC-MIB | dlinkIndustrialCommon |
| DLINKSW-TC-MIB | Dlink2kVlanList |
| IF-MIB | InterfaceIndex |
| Q-BRIDGE-MIB | VlanId |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.14.46 | IdentitydlinkSwLoopbackDetectMIB | This MIB module defines objects for loopback detection. | ||
| 1.3.6.1.4.1.171.14.46.0 | NodedLbdNotifications | |||
| 1.3.6.1.4.1.171.14.46.0.1 | NotificationdLbdLoopOccurred | current | This trap is sent when an interface loop occurs. | |
| 1.3.6.1.4.1.171.14.46.0.2 | NotificationdLbdLoopRestart | current | This trap is sent when an interface loop restarts after the interval time. | |
| 1.3.6.1.4.1.171.14.46.0.3 | NotificationdLbdVlanLoopOccurred | current | This trap is sent when an interface with a VID loop occurs. | |
| 1.3.6.1.4.1.171.14.46.0.4 | NotificationdLbdVlanLoopRestart | current | This trap is sent when an interface loop with a VID restarts after the interval time. | |
| 1.3.6.1.4.1.171.14.46.1 | NodedLbdObjects | |||
| 1.3.6.1.4.1.171.14.46.1.1 | ScalardLbdCtrlInterval | read-write | current | This object indicates the interval in seconds at which LBD packets are transmitted. |
| 1.3.6.1.4.1.171.14.46.1.2 | ScalardLbdCtrlGlobalEnabled | read-write | current | This object indicates whether the loopback detection is enabled globally. |
| 1.3.6.1.4.1.171.14.46.1.3 | ScalardLbdCtrlMode | read-write | current | This object indicates the loopback detection mode. portBased(1) - The loopback detection works in port-based mode. vlanBased(2) - The loopback detection works … |
| 1.3.6.1.4.1.171.14.46.1.4 | TabledLbdIfCfgTable | not-accessible | current | A list of loopback detection information entries. |
| 1.3.6.1.4.1.171.14.46.1.4.1 | RowdLbdIfCfgEntry | not-accessible | current | An entry indicates the setting of loopback detection on an interface. |
| 1.3.6.1.4.1.171.14.46.1.4.1.1 | ColumndLbdIfCfgIndex | not-accessible | current | This object indicates the ifIndex of the physical port or port channel. |
| 1.3.6.1.4.1.171.14.46.1.4.1.2 | ColumndLbdIfCfgEnabled | read-write | current | This object indicates whether the loopback detection is enabled on the interface. |
| 1.3.6.1.4.1.171.14.46.1.4.1.3 | ColumndLbdIfLoopStatus | read-only | current | This object indicates whether the interface loopback status. |
| 1.3.6.1.4.1.171.14.46.1.4.1.4 | ColumndLbdIfLoopVlans | read-only | current | This object indicates the VLAN list that has detected a loopback. |
| 1.3.6.1.4.1.171.14.46.1.5 | IdentitydLbdVlanCtrlObjects | current | This identifier defines a subtree under which a set of objects are defined to enable loopback detection on specific VLANs. That is, LBD Control packet will be … | |
| 1.3.6.1.4.1.171.14.46.1.5.1 | ScalardLbdVlanCrlFirst2K | read-write | current | This object specifies the loopback detection enabled VLAN in a string of octets containing one bit per VLAN for VLANs 1 to 2048. If the bit is set to '1', then… |
| 1.3.6.1.4.1.171.14.46.1.5.2 | ScalardLbdVlanCrlSecond2K | read-write | current | This object specifies the loopback detection enabled VLAN in a string of octets containing one bit per VLAN for VLANs 2049 to 4095. If the bit is set to '1', t… |
| 1.3.6.1.4.1.171.14.46.1.6 | ScalardLbdActMode | read-write | current | This object indicates the loopback detection action mode. shundown(1) - When loop has been detected, the port will be shut down (disabled) in port-based mode, … |
| 1.3.6.1.4.1.171.14.46.1.7 | ScalardLbdNotifyEnabled | read-write | current | Set to 'true' to enable global SNMP notification for loopback detection feature. Setting the object to 'false' will disable SNMP notifications. |
| 1.3.6.1.4.1.171.14.46.1.8 | IdentitydLbdNotifyInfo | current | This identifier is a group for variable bindings for traps. | |
| 1.3.6.1.4.1.171.14.46.1.8.1 | ScalardLbdNotifyInfoIfIndex | accessible-for-notify | current | This object indicates the interface id that has detected a loopback. |
| 1.3.6.1.4.1.171.14.46.1.8.2 | ScalardLbdNotifyInfoVlanId | accessible-for-notify | current | This object indicates the vlan id that has detected a loopback. |
| 1.3.6.1.4.1.171.14.46.1.9 | ScalardLbdAddressType | read-write | current | This object indicates the CTP packet's DA type. multicast(1) - Only multicast CTP packet will be sent.The CTP packet's DA is CF-00-00-00-00-00. broadcast(2) - … |
| 1.3.6.1.4.1.171.14.46.2 | NodedLbdConformance | |||
| 1.3.6.1.4.1.171.14.46.2.1 | NodedLbdMIBCompliances | |||
| 1.3.6.1.4.1.171.14.46.2.1.1 | CompliancedLbdMIBCompliance | current | The compliance statement for entities which implement the DLINKSW-LBD-MIB. | |
| 1.3.6.1.4.1.171.14.46.2.2 | NodedLbdMIBGroups | |||
| 1.3.6.1.4.1.171.14.46.2.2.1 | GroupdLbdCfgGroup | current | A collection of objects providing management of the loopback detection feature. | |
| 1.3.6.1.4.1.171.14.46.2.2.2 | GroupdLbdIfCfgGroup | current | A collection of objects providing the per-interface control of loopback detection. | |
| 1.3.6.1.4.1.171.14.46.2.2.3 | GroupdLbdCtrlModeGroup | current | A collection of objects providing the mode of loopback detection. | |
| 1.3.6.1.4.1.171.14.46.2.2.4 | GroupdLbdVlanCtrlGroup | current | A collection of objects providing the VLAN list of loopback detection. | |
| 1.3.6.1.4.1.171.14.46.2.2.5 | GroupdLbdNotificationGroup | current | A collection of notifications used for monitoring the hosts under the control of loopback detection. |