DLINKSW-NETWORK-ACCESS-MIB
83 objects
This MIB module defines objects for Network Access Authentication in the system. Network Access Authentication provides generic configurations for authentication methods in the system and manages the failover sequence of these methods in a flexible manner.
Imported Objects
| DLINK-ID-REC-MIB | dlinkIndustrialCommon |
| DLINKSW-TC-MIB | Dlink2kVlanList |
| IF-MIB | ifIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| Q-BRIDGE-MIB | VlanIdOrNone |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.14.151 | IdentitydlinkSwNetworkAccessAuthMIB | This MIB module defines objects for Network Access Authentication in the system. Network Access Authentication provides generic configurations for authenticati… | ||
| 1.3.6.1.4.1.171.14.151.0 | NodedNetAccessAuthMIBNotifications | |||
| 1.3.6.1.4.1.171.14.151.1 | NodedNetAccessAuthMIBObjects | |||
| 1.3.6.1.4.1.171.14.151.1.1 | NodedNetAuthSystem | |||
| 1.3.6.1.4.1.171.14.151.1.1.1 | ScalardnaMacMoveMode | read-write | current | This object controls whether to allow authenticated hosts to do roaming across different switch ports. deny : When a host is authenticated on one port, that ad… |
| 1.3.6.1.4.1.171.14.151.1.1.2 | ScalardnaAuthorizationEnabled | read-write | current | This object indicates the state of acceptance of the authorized configuration. When authorization is enabled for authentication, the authorized attributes (for… |
| 1.3.6.1.4.1.171.14.151.1.1.3 | ScalardnaMacFormatCase | read-write | current | This object indicates the format of the authentication MAC address. uppercase: Using uppercase format, the formatted is: AA-BB-CC-DD-EE-FF. lowercase: Using lo… |
| 1.3.6.1.4.1.171.14.151.1.1.4 | ScalardnaMacFormatDelimiter | read-write | current | This object indicates the delimiter format of authentication MAC address. none: Not using any delimiter, the format is: AABBCCDDEEFF hyphen: Using '-' as delim… |
| 1.3.6.1.4.1.171.14.151.1.1.5 | ScalardnaMacFormatDelimiterNumber | read-write | current | This object indicates the delimiter number of authentication MAC address. 1: single delimiter, the format is: AABBCC.DDEEFF 2: double delimiter, the format is:… |
| 1.3.6.1.4.1.171.14.151.1.2 | NodedNetAuthAuthenticator | |||
| 1.3.6.1.4.1.171.14.151.1.2.1 | ScalardnaMaxAuthedUserLimit | read-write | current | This object indicates the maximum authenticated users of the system. |
| 1.3.6.1.4.1.171.14.151.1.2.2 | TablednaPortConfigTable | not-accessible | current | This table is a list of configurations for ports. An entry will exist for every interface which supports Network Access Authentication feature. |
| 1.3.6.1.4.1.171.14.151.1.2.2.1 | RowdnaPortConfigEntry | not-accessible | current | An entry contains port-specific configuration for Network Access Authentication. |
| 1.3.6.1.4.1.171.14.151.1.2.2.1.1 | ColumndnaPortMaxAuthedUserLimit | read-write | current | This object indicates the maximum authenticated users of this port. |
| 1.3.6.1.4.1.171.14.151.1.2.2.1.2 | ColumndnaPortAuthHostMode | read-write | current | This object indicates the authentication host mode of the entry. |
| 1.3.6.1.4.1.171.14.151.1.2.2.1.3 | ColumndnaPortAuthVlansFirst2K | read-write | current | This object specifies the authentication VLAN(s) in a string of octets containing one bit per VLAN for VLANs 1 to 2048. If the bit is set to '1', then the VLAN… |
| 1.3.6.1.4.1.171.14.151.1.2.2.1.4 | ColumndnaPortAuthVlansSecond2K | read-write | current | This object specifies the authentication VLAN(s) in a string of octets containing one bit per VLAN for VLANs 2049 to 4094. If the bit is set to '1', then the V… |
| 1.3.6.1.4.1.171.14.151.1.2.2.1.5 | ColumndnaPortReauthEnabled | read-write | current | This object indicates whether the periodic re-authentication is enabled. |
| 1.3.6.1.4.1.171.14.151.1.2.2.1.6 | ColumndnaPortReauthInterval | read-write | current | Specifies the re-authentication interval, after which the port will be re-authenticated if value of the corresponding instance of dnaPortReauthEnabled is 'true… |
| 1.3.6.1.4.1.171.14.151.1.2.2.1.7 | ColumndnaPortRestartInterval | read-write | current | Specifies the interval after which a further authentication attempt should be made to this port if it is not authorized. |
| 1.3.6.1.4.1.171.14.151.1.2.2.1.8 | ColumndnaPortInactivityTimeout | read-write | current | Specifies the period of time that a client associating with this port is allowed to be inactive before being terminated. A value of zero indicates that inactiv… |
| 1.3.6.1.4.1.171.14.151.1.2.2.1.9 | ColumndnaPortGuestVlanid | read-write | current | Specifies the VLAN ID of guest VLAN on the interface. The guest VLAN allows the user access within the guest VLAN before it is authenticated. A value of zero f… |
| 1.3.6.1.4.1.171.14.151.1.2.3 | TablednaPortMethodTable | not-accessible | current | The table contains a list of authentication methods information on ports. An entry will exist for every port which supports Network Access Authentication featu… |
| 1.3.6.1.4.1.171.14.151.1.2.3.1 | RowdnaPortMethodEntry | not-accessible | current | An entry contains configuration and information of authentication methods for a particular port. |
| 1.3.6.1.4.1.171.14.151.1.2.3.1.1 | ColumndnaPortMethodAvailable | read-only | current | This object indicates the currently effective authentication methods on the port. e.g: The dnaPortMethodCompAuthMode of the interface is set to any(1), but onl… |
| 1.3.6.1.4.1.171.14.151.1.2.3.1.2 | ColumndnaPortMethodCompAuthMode | read-write | current | This object indicates the compound authentication mode on the port. |
| 1.3.6.1.4.1.171.14.151.1.3 | NodedNetAuthSession | |||
| 1.3.6.1.4.1.171.14.151.1.3.1 | TablednaSessionTable | not-accessible | current | The table contains a list of authentication sessions. An entry is created when an authentication session has been successfully created within Network Access Au… |
| 1.3.6.1.4.1.171.14.151.1.3.1.1 | RowdnaSessionEntry | not-accessible | current | An entry contains management information for a particular authentication session. |
| 1.3.6.1.4.1.171.14.151.1.3.1.1.1 | ColumndnaSessionId | not-accessible | current | This object indicates a unique identifier of the authentication session. |
| 1.3.6.1.4.1.171.14.151.1.3.1.1.2 | ColumndnaSessionClientMacAddress | read-only | current | This object indicates the MAC address of the device associates with the authentication session. |
| 1.3.6.1.4.1.171.14.151.1.3.1.1.3 | ColumndnaSessionClientAddrType | read-only | current | This object indicates the type of Internet address of the client associates with the authentication session. This object is meaningful only when the correspond… |
| 1.3.6.1.4.1.171.14.151.1.3.1.1.4 | ColumndnaSessionClientAddress | read-only | current | This object indicates the Internet address of the client associates with the authentication session. This object is meaningful only when the corresponding dnaS… |
| 1.3.6.1.4.1.171.14.151.1.3.1.1.5 | ColumndnaSessionStatus | read-only | current | This object indicates the current status of the authentication session. idle : the session has been initialized and no method has run yet. authenticating : an … |
| 1.3.6.1.4.1.171.14.151.1.3.1.1.6 | ColumndnaSessionAuthUserName | read-only | current | This object indicates the user name of the authentication session. This object is meaningless when the corresponding dnaSessionAuthorizedBy is macAuth and a ze… |
| 1.3.6.1.4.1.171.14.151.1.3.1.1.7 | ColumndnaSessionAuthorizedBy | read-only | current | This object indicates the method which authorizes the authentication session. |
| 1.3.6.1.4.1.171.14.151.1.3.1.1.8 | ColumndnaSessionAuthVlan | read-only | current | This object indicates the authorized VLAN applied to the authentication session. Value zero indicates that no authorized VLAN has been applied, or it is not ap… |
| 1.3.6.1.4.1.171.14.151.1.3.1.1.9 | ColumndnaSessionAccountingID | read-only | current | This object indicates the accounting session ID that using to accounting after authenticated. |
| 1.3.6.1.4.1.171.14.151.1.3.1.1.10 | ColumndnaSessionAssignVid | read-only | current | This object indicates the effectively assigned VLAN ID that are authorized after host pass authenticated. A value of zero indicates that no valid VLAN ID is au… |
| 1.3.6.1.4.1.171.14.151.1.3.1.1.11 | ColumndnaSessionAssignPriority | read-only | current | This object indicates the effectively assigned priority that is authorized after host pass authenticated. A value of -1 indicates that no valid priority is aut… |
| 1.3.6.1.4.1.171.14.151.1.3.1.1.12 | ColumndnaSessionAssignIngressBandwidth | read-only | current | This object indicates the effectively assigned ingress bandwidth that is authorized after host pass authenticated. A value of -1 indicates that no valid ingres… |
| 1.3.6.1.4.1.171.14.151.1.3.1.1.13 | ColumndnaSessionAssignEgressBandwidth | read-only | current | This object indicates the effectively assigned egress bandwidth that is authorized after host pass authenticated. A value of -1 indicates that no valid egress … |
| 1.3.6.1.4.1.171.14.151.1.3.1.1.14 | ColumndnaSessionTimeout | read-only | current | Indicates the session timeout used by Network Access Authentication for the authentication session. |
| 1.3.6.1.4.1.171.14.151.1.3.1.1.15 | ColumndnaSessionTimeLeft | read-only | current | Indicates the leftover time of the authentication session. |
| 1.3.6.1.4.1.171.14.151.1.3.1.1.16 | ColumndnaSessionInactivityTimeout | read-only | current | Indicates the inactivity timeout used by Network Access Authentication for the authentication session. |
| 1.3.6.1.4.1.171.14.151.1.3.1.1.17 | ColumndnaSessionInactivityTimeLeft | read-only | current | Indicates the leftover time of the inactivity timer of the authentication session. |
| 1.3.6.1.4.1.171.14.151.1.3.1.1.99 | ColumndnaSessionTerminateSession | read-write | current | This object terminates the authentication session, when set to 'terminate'. Setting this object to 'false' has no effect. No action is taken if this object is … |
| 1.3.6.1.4.1.171.14.151.1.3.2 | TablednaSessionMethodInfoTable | not-accessible | current | The table contains a list of authenticating state information of methods for every authentication session. An entry exists for every authentication method that… |
| 1.3.6.1.4.1.171.14.151.1.3.2.1 | RowdnaSessionMethodInfoEntry | not-accessible | current | An entry contains information for a particular effective authentication method which is associated with a session on an interface. |
| 1.3.6.1.4.1.171.14.151.1.3.2.1.1 | ColumndnaSessionMethod | not-accessible | current | Indicates the authentication method of the entry. |
| 1.3.6.1.4.1.171.14.151.1.3.2.1.2 | ColumndnaSessionMethodState | read-only | current | Indicates the state of this authentication method. notInitiated : The method hasn't initiated the authentication process yet. inProgress : The authentication m… |
| 1.3.6.1.4.1.171.14.151.1.3.3 | TablednaSessionTerminateIfTable | not-accessible | current | The table is used to terminate authentication sessions by interface. |
| 1.3.6.1.4.1.171.14.151.1.3.3.1 | RowdnaSessionTerminateIfEntry | not-accessible | current | An entry is used to terminate authentication sessions by specifying authentication methods per Network Access Authentication managed port. |
| 1.3.6.1.4.1.171.14.151.1.3.3.1.1 | ColumndnaSessionTerminateIfMethodList | read-write | current | This object is used to terminate authentication sessions by methods on an interface by setting the corresponding bit to '1'. This object always returns '00'H w… |
| 1.3.6.1.4.1.171.14.151.1.3.4 | ScalardnaSessionTerminateMethod | read-write | current | This object is used to terminate the authentication sessions by setting this object to valid value. Setting this object to 'other' has no effect. When read, th… |
| 1.3.6.1.4.1.171.14.151.1.3.5 | ScalardnaSessionTerminateAll | read-write | current | This object is used to terminate all authentication sessions by setting this object to 'terminateAll'. Setting this object to 'noOp' has no effect. When read, … |
| 1.3.6.1.4.1.171.14.151.1.4 | NodedNetAuthUser | |||
| 1.3.6.1.4.1.171.14.151.1.4.1 | TablednaUserTable | not-accessible | current | A table contains a list of users in the local database for authentication. |
| 1.3.6.1.4.1.171.14.151.1.4.1.1 | RowdnaUserEntry | not-accessible | current | An entry consists of information for an account. |
| 1.3.6.1.4.1.171.14.151.1.4.1.1.1 | ColumndnaUserName | not-accessible | current | This object indicates the username for this user account. |
| 1.3.6.1.4.1.171.14.151.1.4.1.1.2 | ColumndnaUserPassword | read-create | current | This object indicates the password in clear text form for this user account. When read, a zero length string will be returned for security reasons. |
| 1.3.6.1.4.1.171.14.151.1.4.1.1.3 | ColumndnaUserTargetVlanid | read-create | current | This object indicates the VLAN ID to be assigned for this user account. |
| 1.3.6.1.4.1.171.14.151.1.4.1.1.99 | ColumndnaUserRowStatus | read-create | current | This object manages this user account. |
| 1.3.6.1.4.1.171.14.151.2 | NodedNetAccessAuthMIBConformance | |||
| 1.3.6.1.4.1.171.14.151.2.1 | NodednaMIBCompliances | |||
| 1.3.6.1.4.1.171.14.151.2.1.1 | CompliancednaCompliance | current | The compliance statement for entities which implement DLINKSW-NETWORK-ACCESS-MIB. | |
| 1.3.6.1.4.1.171.14.151.2.2 | NodednaMIBGroups | |||
| 1.3.6.1.4.1.171.14.151.2.2.1 | GroupdnaAuthPortConfigGroup | current | A collection of objects that provides port-specific configuration of Network Access Authentication. | |
| 1.3.6.1.4.1.171.14.151.2.2.2 | GroupdnaPortMethodGroup | current | A collection of objects provides authentication methods configuration for Network Access Authentication. | |
| 1.3.6.1.4.1.171.14.151.2.2.3 | GroupdnaSessionGroup | current | A collection of objects that provides authentication session management information for Network Access Authentication. | |
| 1.3.6.1.4.1.171.14.151.2.2.4 | GroupdnaSessionMethodInfoGroup | current | A collection of objects that provides authentication session state information per authentication methods. | |
| 1.3.6.1.4.1.171.14.151.2.2.5 | GroupdnaMacMoveConfigGroup | current | A collection of objects providing MAC move configuration for Network Access Authentication on the device. | |
| 1.3.6.1.4.1.171.14.151.2.2.6 | GroupdnaAuthzConfigGroup | current | A collection of objects provides authorization configuration for Network Access Authentication on the device. | |
| 1.3.6.1.4.1.171.14.151.2.2.7 | GroupdnaMacFormatGroup | current | A collection of objects provides MAC format configuration for Network Access Authentication on the device. | |
| 1.3.6.1.4.1.171.14.151.2.2.8 | GroupdnaMaxAuthedUserLimitGroup | current | A collection of objects provides configuration of upper limits for authenticated user. | |
| 1.3.6.1.4.1.171.14.151.2.2.9 | GroupdnaGuestVlanGroup | current | A collection of objects providing guest VLAN configuration for Network Access Authentication on the device. | |
| 1.3.6.1.4.1.171.14.151.2.2.10 | GroupdnaAuthenticationVlanGroup | current | A collection of objects provides for the platform which supports the feature of per VLAN authentication. | |
| 1.3.6.1.4.1.171.14.151.2.2.11 | GroupdnaSessionTerminateGroup | current | A collection of objects providing terminate authentication session information for Network Access Authentication on the device. | |
| 1.3.6.1.4.1.171.14.151.2.2.12 | GroupdnaAccountUserGroup | current | A collection of objects providing local account information for Network Access Authentication on the device. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DlinkAuthHostMode | INTEGER { multiHost(1), multiAuth(2) } | current | The authentication mode of a controlled port. multiHost : If a port is operated in multi-host mode, once a host is authenticated, all remaining hosts are also authenticated in a single domain. multiAuth : If a port is o… |
| DlinkAuthMethod | INTEGER { other(1), dot1x(2), macAuth(3), webAuth(4), jwac(5) } | current | The authentication methods and protocols supported in Network Access Authentication. other : other methods no defined here. 'other' is a read-only value and cannot be used in set operation. dot1x : 802.1X Protocol. macA… |
| DlinkAuthMethodList | BITS { dot1x(0), macAuth(1), webAuth(2), jwac(3) } | current | The authentication methods being used by Network Access Authentication. This object is a bit map, with each bit representing a different authentication type as identified below. A 1-bit indicates the authentication meth… |
| DlinkCompAuthMode | INTEGER { any(1), macJwac(2), macWac(3) } | current | The compound authentication mode of a controlled port. any : The host needs pass one of the authentication methods (802.1X, MAC-based Access Control, WAC and JWAC). macJwac : MAC-based Access Control will be verified fi… |