DLINKSW-SFLOW-MIB
44 objects
The structure of sFlow for the proprietary enterprise.
Imported Objects
| DLINK-ID-REC-MIB | dlinkIndustrialCommon |
| INET-ADDRESS-MIB | InetAddress InetAddressIPv4 InetAddressIPv6 InetAddressType |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.14.36 | IdentitydlinkSwSFlowMIB | The structure of sFlow for the proprietary enterprise. | ||
| 1.3.6.1.4.1.171.14.36.0 | NodedSFlowMIBNotifications | |||
| 1.3.6.1.4.1.171.14.36.1 | NodedSFlowMIBObjects | |||
| 1.3.6.1.4.1.171.14.36.1.1 | ScalardSFlowVersion | read-only | current | Uniquely identifies the version and implementation of this MIB. The version string must have the following structure: <MIB Version>;<Organization>;<Software Re… |
| 1.3.6.1.4.1.171.14.36.1.2 | ScalardSFlowAgentAddressIPv4 | read-only | current | The IPv4 address associated with this agent. |
| 1.3.6.1.4.1.171.14.36.1.3 | ScalardSFlowAgentAddressIPv6 | read-only | current | The IPv6 address associated with this agent. If the IPv6 is not supported on this agent, 0::0 will be displayed. |
| 1.3.6.1.4.1.171.14.36.1.4 | TabledSFlowRcvrTable | not-accessible | current | A table of the receivers of sFlow information. |
| 1.3.6.1.4.1.171.14.36.1.4.1 | RowdSFlowRcvrEntry | not-accessible | current | Attributes of an sFlow Receiver. |
| 1.3.6.1.4.1.171.14.36.1.4.1.1 | ColumndSFlowRcvrIndex | not-accessible | current | Index into dSFlowReceiverTable. The number of supported receivers is project dependent. |
| 1.3.6.1.4.1.171.14.36.1.4.1.2 | ColumndSFlowRcvrOwner | read-write | current | The entity making use of this dSFlowRcvrTable entry. The empty string indicates that the entry is currently unclaimed. An entity wishing to claim a dSFlowRcvrT… |
| 1.3.6.1.4.1.171.14.36.1.4.1.3 | ColumndSFlowRcvrAdminTimeout | read-write | current | The expire time (in seconds) configured for the receiver. A management entity wanting to maintain control of the receiver is responsible for setting a new valu… |
| 1.3.6.1.4.1.171.14.36.1.4.1.4 | ColumndSFlowRcvrCurrentTimeout | read-only | current | The time (in seconds) remaining before the receiver is released. |
| 1.3.6.1.4.1.171.14.36.1.4.1.5 | ColumndSFlowRcvrMaximumDatagramSize | read-write | current | The maximum number of data bytes that can be sent in a single sample datagram. The manager should set this value to avoid fragmentation of the sFlow datagrams. |
| 1.3.6.1.4.1.171.14.36.1.4.1.6 | ColumndSFlowRcvrAddressType | read-write | current | The address type of the sFlow collector. |
| 1.3.6.1.4.1.171.14.36.1.4.1.7 | ColumndSFlowRcvrAddress | read-write | current | The IP address of the sFlow collector. If set to 0.0.0.0 no sFlow datagrams will be sent. |
| 1.3.6.1.4.1.171.14.36.1.4.1.8 | ColumndSFlowRcvrVrfName | read-write | current | Specify the name of the routing forwarding instance. |
| 1.3.6.1.4.1.171.14.36.1.4.1.9 | ColumndSFlowRcvrPort | read-write | current | The UDP port of the remote sFlow collector. |
| 1.3.6.1.4.1.171.14.36.1.4.1.10 | ColumndSFlowRcvrDatagramVersion | read-only | current | The version of sFlow datagrams that should be sent. |
| 1.3.6.1.4.1.171.14.36.1.4.1.11 | ColumndSFlowRcvrReset | read-write | current | This object reset the receiver when set to 'reset'. No action is taken if this object is set to 'noOp'. When read, the value 'noOp' is returned. |
| 1.3.6.1.4.1.171.14.36.1.5 | TabledSFlowFsTable | not-accessible | current | A table of the flow samplers within a device. |
| 1.3.6.1.4.1.171.14.36.1.5.1 | RowdSFlowFsEntry | not-accessible | current | Attributes of a flow sampler. |
| 1.3.6.1.4.1.171.14.36.1.5.1.1 | ColumndSFlowFsDataSource | not-accessible | current | This object indicates the source of the data for this flow sampler. |
| 1.3.6.1.4.1.171.14.36.1.5.1.2 | ColumndSFlowFsInstance | not-accessible | current | The instance index for uniquely identifying the flow sampler when multiple flow samplers are associated with one interface. |
| 1.3.6.1.4.1.171.14.36.1.5.1.3 | ColumndSFlowFsReceiver | read-create | current | The index of the sFlow receiver for this flow sampler. |
| 1.3.6.1.4.1.171.14.36.1.5.1.4 | ColumndSFlowFsDirection | read-create | current | This object indicates the flow direction which will be sampled. 'inbound' - sample ingress packets. 'outbound' - sample egress packets. |
| 1.3.6.1.4.1.171.14.36.1.5.1.5 | ColumndSFlowFsAdminSamplingRate | read-create | current | The configured sampling rate for packet sampling from this source. Set to N to sample 1/Nth of the packets in the monitored flows. An agent should choose its o… |
| 1.3.6.1.4.1.171.14.36.1.5.1.6 | ColumndSFlowFsActiveSamplingRate | read-only | current | The statistical sampling rate for packet sampling from this source. When read, the agent must return the actual sampling rate it will be using (after the adjus… |
| 1.3.6.1.4.1.171.14.36.1.5.1.7 | ColumndSFlowFsMaximumHeaderSize | read-create | current | The maximum number of bytes that should be copied from a sampled packet. The agent may have an internal maximum and minimum permissible sizes. If an attempt is… |
| 1.3.6.1.4.1.171.14.36.1.5.1.8 | ColumndSFlowFsRowStatus | read-create | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.171.14.36.1.6 | TabledSFlowCpTable | not-accessible | current | A table of the counter pollers within a device. |
| 1.3.6.1.4.1.171.14.36.1.6.1 | RowdSFlowCpEntry | not-accessible | current | Attributes of a counter poller. |
| 1.3.6.1.4.1.171.14.36.1.6.1.1 | ColumndSFlowCpDataSource | not-accessible | current | Identifies the source of the data for the counter poller. |
| 1.3.6.1.4.1.171.14.36.1.6.1.2 | ColumndSFlowCpInstance | not-accessible | current | The instance instance index for uniquely identifying the counter poller when multiple Pollers are associated with one interface. |
| 1.3.6.1.4.1.171.14.36.1.6.1.3 | ColumndSFlowCpReceiver | read-create | current | The sflow receiver's index for this counter poller. |
| 1.3.6.1.4.1.171.14.36.1.6.1.4 | ColumndSFlowCpInterval | read-create | current | The maximum number of seconds between successive samples of the counters associated with this data source. A sampling interval of 0 disables counter sampling. … |
| 1.3.6.1.4.1.171.14.36.1.6.1.5 | ColumndSFlowCpRowStatus | read-create | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.171.14.36.2 | NodedSFlowMIBConformance | |||
| 1.3.6.1.4.1.171.14.36.2.1 | NodedSFlowMIBCompliances | |||
| 1.3.6.1.4.1.171.14.36.2.1.1 | CompliancedSFlowCompliance | current | The compliance statement for entities which implement the DLINKSW-SFLOW-MIB. | |
| 1.3.6.1.4.1.171.14.36.2.2 | NodedSFlowMIBGroups | |||
| 1.3.6.1.4.1.171.14.36.2.2.1 | GroupdSFlowAgentGroup | current | A collection of objects for managing the generation and transportation of sFlow data records. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DSFlowDataSource | Integer32 (1..2147483647) | current | Identifies the ifIndex of interface as the source of sFlow data. DSFlowDataSources of this traditional form are called 'port-based'. Ideally the sampling entity will perform sampling on all flows originating from or des… |
| DSFlowInstance | Integer32 (1..65535) | current | If more than one sFlow sampler is available for this DSFlowDataSource then individual samplers are distinguished using the DSFlowInstance variable. The value of DSFlowInstance ranges from 1..n where n is the number of s… |
| DSFlowReceiver | Integer32 | current | Identify the sFlow receiver associated with this resource. A value of zero indicates that this resource is available. If non-zero the value must correspond to a valid, active dSFlowRcvrIndex. If the value is currently z… |