DLINKSW-SNMP-MIB
45 objects
This MIB module defines objects for configuring SNMP ( Simple Network Management Protocol )
Imported Objects
| DLINK-ID-REC-MIB | dlinkIndustrialCommon |
| IF-MIB | ifIndex InterfaceIndexOrZero |
| SNMP-FRAMEWORK-MIB | SnmpAdminString SnmpEngineID SnmpSecurityModel |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.14.2 | IdentitydlinkSwSnmpMIB | This MIB module defines objects for configuring SNMP ( Simple Network Management Protocol ) | ||
| 1.3.6.1.4.1.171.14.2.0 | NodedSnmpMIBNotifications | |||
| 1.3.6.1.4.1.171.14.2.1 | NodedSnmpMIBObjects | |||
| 1.3.6.1.4.1.171.14.2.1.1 | NodedSnmpGeneral | |||
| 1.3.6.1.4.1.171.14.2.1.1.1 | ScalardSnmpServiceEnabled | read-write | current | A Boolean value represents the SNMP server is Enabled or Disabled. |
| 1.3.6.1.4.1.171.14.2.1.1.2 | ScalardSnmpServiceUdpPort | read-write | current | This object indicates the SNMP UDP port number. By default, the SNMP agent receives requests on UDP port 161. |
| 1.3.6.1.4.1.171.14.2.1.1.3 | ScalardSnmpRspBcastRequestEnabled | read-write | current | A Boolean value represents whether response broadcast SNMP GetRequest packet. |
| 1.3.6.1.4.1.171.14.2.1.1.4 | ScalardSnmpLocalEngineID | read-write | current | This object indicates the agent's local engineID value. Changing this variable will affect the value of snmpEngineID. The special value of '00 00 00 00 00'H in… |
| 1.3.6.1.4.1.171.14.2.1.2 | NodedSnmpMIBTrap | |||
| 1.3.6.1.4.1.171.14.2.1.2.1 | ScalardSnmpTrapGlobalEnabled | read-write | current | A Boolean value to represent the global state of sending of trap packets. |
| 1.3.6.1.4.1.171.14.2.1.2.2 | ScalardSnmpTrapGlobalNotifyEnable | read-write | current | This object indicates global state about whether a specified notification is enabled or not. If a bit corresponding to a notification is set to 1, then the spe… |
| 1.3.6.1.4.1.171.14.2.1.2.3 | ScalardSnmpTrapSourceIfIndex | read-write | current | The ifIndex of the interface whose IP address is used as the source IP address for outbound SNMP traps. A special value of zero indicates the source interface … |
| 1.3.6.1.4.1.171.14.2.1.2.4 | NodedSnmpTrapIfCtrl | |||
| 1.3.6.1.4.1.171.14.2.1.2.4.1 | TabledSnmpTrapIfCfgTable | not-accessible | current | This table contains a list of interface-specific notification configuration. |
| 1.3.6.1.4.1.171.14.2.1.2.4.1.1 | RowdSnmpTrapIfCfgEntry | not-accessible | current | An entry manages notification on an interface. |
| 1.3.6.1.4.1.171.14.2.1.2.4.1.1.1 | ColumndSnmpTrapIfSendTrapEnabled | read-create | current | This object indicates whether sending trap on the interface. If the state is disabled, then SNMP notification traps generated by the system are not allowed to … |
| 1.3.6.1.4.1.171.14.2.1.3 | NodedSnmpAccessCfg | |||
| 1.3.6.1.4.1.171.14.2.1.3.1 | TabledSnmpCommunityTable | not-accessible | current | This table consists of a list of communities. |
| 1.3.6.1.4.1.171.14.2.1.3.1.1 | RowdSnmpCommunityEntry | not-accessible | current | An entry defines additional information which is not covered at snmpCommunityTable (defined in SNMP-COMMUNITY-MIB). An entry appears in this table when a commu… |
| 1.3.6.1.4.1.171.14.2.1.3.1.1.1 | ColumndSnmpCommunityName | not-accessible | current | This object indicates the name of the community. |
| 1.3.6.1.4.1.171.14.2.1.3.1.1.3 | ColumndSnmpCommunityAccessListName | read-write | current | This object indicates the name of a standard access list to control the user to use this community string to access to the SNMP agent. Specify the valid user i… |
| 1.3.6.1.4.1.171.14.2.1.3.2 | TabledSnmpGroupTable | not-accessible | current | This table consists of a list of groups. |
| 1.3.6.1.4.1.171.14.2.1.3.2.1 | RowdSnmpGroupEntry | not-accessible | current | An entry consists of additional informaiton which is not covered at vacmAccessTable (defined in SNMP-VIEW-BASED-ACM-MIB). An entry appears in this table when a… |
| 1.3.6.1.4.1.171.14.2.1.3.2.1.1 | ColumndSnmpGroupName | not-accessible | current | This object indicates the name of the group. |
| 1.3.6.1.4.1.171.14.2.1.3.2.1.2 | ColumndSnmpGroupVersion | not-accessible | current | This object indicates the version of the entry. |
| 1.3.6.1.4.1.171.14.2.1.3.2.1.3 | ColumndSnmpGroupAccessListName | read-write | current | This object indicates the name of a standard access control list (ACL) to associate with the group. A zero length string indicates the access list is not speci… |
| 1.3.6.1.4.1.171.14.2.1.3.3 | TabledSnmpHostTable | not-accessible | current | This table consists of a list of recipients for the SNMP notification. |
| 1.3.6.1.4.1.171.14.2.1.3.3.1 | RowdSnmpHostEntry | not-accessible | current | An entry consists of additional informaiton which is not covered at snmpTargetAddrTable and snmpTargetParamsTable (defined in SNMP-TARGET-MIB). An entry appear… |
| 1.3.6.1.4.1.171.14.2.1.3.3.1.1 | ColumndSnmpHostAddrName | not-accessible | current | This object indicates the address name of the recipients. |
| 1.3.6.1.4.1.171.14.2.1.3.3.1.2 | ColumndSnmpHostVrfName | read-write | current | This object indicates the name of the routing forwarding instance. A zero length string indicates the object is not specified. |
| 1.3.6.1.4.1.171.14.2.1.3.3.1.3 | ColumndSnmpHostUdpPort | read-write | current | This object indicates trap UDP port number. |
| 1.3.6.1.4.1.171.14.2.1.3.4 | TabledSnmpUserTable | not-accessible | current | This table consists of a list of recipients for the SNMP notification. |
| 1.3.6.1.4.1.171.14.2.1.3.4.1 | RowdSnmpUserEntry | not-accessible | current | An entry consists of additional informaiton which is not covered at usmUserTable (defined in SNMP-USER-BASED-SM-MIB). An entry appears in this table when a use… |
| 1.3.6.1.4.1.171.14.2.1.3.4.1.1 | ColumndSnmpUserName | not-accessible | current | This object indicates the name of the user. |
| 1.3.6.1.4.1.171.14.2.1.3.4.1.2 | ColumndSnmpUserAccessListName | read-write | current | This object indicates the name of a standard IP access control list (ACL) to associate with the user. A zero length string indicates the access list is not spe… |
| 1.3.6.1.4.1.171.14.2.2 | NodedSnmpMIBConformance | |||
| 1.3.6.1.4.1.171.14.2.2.1 | NodedSnmpCompliances | |||
| 1.3.6.1.4.1.171.14.2.2.1.1 | CompliancedSnmpCompliance | read-only | current | The compliance statement for entities which implement the DLINKSW-SNMP-MIB. |
| 1.3.6.1.4.1.171.14.2.2.2 | NodedSnmpGroups | |||
| 1.3.6.1.4.1.171.14.2.2.2.1 | GroupdSnmpSysCfgGroup | current | A collection of objects provides the information for SNMP server. | |
| 1.3.6.1.4.1.171.14.2.2.2.2 | GroupdSnmpTrapCfgGroup | current | A collection of objects provides system-wide control of traps. | |
| 1.3.6.1.4.1.171.14.2.2.2.3 | GroupdSnmpTrapIfCfgGroup | current | A collection of objects provides interface-specific control of traps. | |
| 1.3.6.1.4.1.171.14.2.2.2.4 | GroupdSnmpCommunityExtGroup | current | The collection of objects provides configuration for community feature which extends SNMP community. | |
| 1.3.6.1.4.1.171.14.2.2.2.5 | GroupdSnmpTargetExtGroup | current | The collection of objects provides configuration for recipient of the SNMP notification. | |
| 1.3.6.1.4.1.171.14.2.2.2.6 | GroupdSnmpVacmExtGroup | current | A collection of objects providing for remote configuration of an SNMP engine which extends the SNMP VACM (View-based Access Control Model) and USM (User-based … |