DLINKSW-STACK-MIB
44 objects
This MIB module defines objects for stacking feature.
Imported Objects
| DLINK-ID-REC-MIB | dlinkIndustrialCommon |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString MacAddress TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.14.9 | IdentitydlinkSwStackMIB | This MIB module defines objects for stacking feature. | ||
| 1.3.6.1.4.1.171.14.9.0 | NodedStackMIBNotifications | |||
| 1.3.6.1.4.1.171.14.9.0.1 | NotificationdStackInsertNotification | current | Device Hot Insert notification. | |
| 1.3.6.1.4.1.171.14.9.0.2 | NotificationdStackRemoveNotification | current | Device Hot Remove notification. | |
| 1.3.6.1.4.1.171.14.9.0.3 | NotificationdStackFailureNotification | current | Device Failure notification. | |
| 1.3.6.1.4.1.171.14.9.0.4 | NotificationdStackTPChangeNotification | current | The stacking topology change notification. | |
| 1.3.6.1.4.1.171.14.9.0.5 | NotificationdStackRoleChangeNotification | current | The stacking device role change notification. | |
| 1.3.6.1.4.1.171.14.9.1 | NodedStackMIBObjects | |||
| 1.3.6.1.4.1.171.14.9.1.1 | NodedStackMgmt | |||
| 1.3.6.1.4.1.171.14.9.1.1.1 | ScalardStackTopology | read-only | current | This object indicates the state of the stacking topology. |
| 1.3.6.1.4.1.171.14.9.1.1.2 | ScalardStackMyBoxId | read-only | current | This object indicates the box ID of the device. |
| 1.3.6.1.4.1.171.14.9.1.1.3 | ScalardStackNumOfDevices | read-only | current | This object indicates the current number of devices in the stacking system. |
| 1.3.6.1.4.1.171.14.9.1.1.4 | ScalardStackAdminEnabled | read-write | current | This object indicates whether the administrative stacking mode has been enabled or not. The new setting will not take effect until the next reboot. |
| 1.3.6.1.4.1.171.14.9.1.1.5 | ScalardStackPreempt | read-write | current | This object indicates whether the preemption is enabled or not. When preemption is enabled, the unit that play master role will change as units with better pri… |
| 1.3.6.1.4.1.171.14.9.1.1.6 | ScalardStackTrapStateEnabled | read-write | current | This object indicates whether the sending of stacking related traps is enabled or not. |
| 1.3.6.1.4.1.171.14.9.1.1.7 | ScalardStackBandwidth | read-write | current | This object indicates the stacking port bandwidth. twoPorts - two ports are used for stacking, each port works as a SIO port fourPorts - four ports are used fo… |
| 1.3.6.1.4.1.171.14.9.1.1.8 | TabledStackUnitInfoTable | not-accessible | current | This table displays the information of the devices in the stacking system. When stacking mode is not effectively enabled, there is no entry in this table. |
| 1.3.6.1.4.1.171.14.9.1.1.8.1 | RowdStackUnitInfoEntry | not-accessible | current | An entry (conceptual row) in dStackUnitInfoTable. |
| 1.3.6.1.4.1.171.14.9.1.1.8.1.1 | ColumndStackInfoBoxId | not-accessible | current | This object indicates box ID of the entry. |
| 1.3.6.1.4.1.171.14.9.1.1.8.1.2 | ColumndStackInfoExist | read-only | current | The state of existence of the unit. |
| 1.3.6.1.4.1.171.14.9.1.1.8.1.3 | ColumndStackInfoRole | read-only | current | The stacking role of the unit. |
| 1.3.6.1.4.1.171.14.9.1.1.8.1.4 | ColumndStackInfoUserSetBoxId | read-write | current | The assigned box ID of the stacking unit. The switch unit cannot be added to a switch stack if its box ID is conflict with existing switch units in the stack. … |
| 1.3.6.1.4.1.171.14.9.1.1.8.1.5 | ColumndStackInfoModuleName | read-only | current | This object indicates the module name of the device. |
| 1.3.6.1.4.1.171.14.9.1.1.8.1.6 | ColumndStackInfoPriority | read-write | current | The priority of the stacking device. When read, if preemption is disabled, the master use 0 (the highest priority) to make sure the current master can hold off… |
| 1.3.6.1.4.1.171.14.9.1.1.8.1.7 | ColumndStackInfoMacAddr | read-only | current | The MAC address of the device. |
| 1.3.6.1.4.1.171.14.9.1.1.8.1.8 | ColumndStackInfoPromVersion | read-only | current | A textual string containing the PROM version of the stacking device. |
| 1.3.6.1.4.1.171.14.9.1.1.8.1.9 | ColumndStackInfoFirmwareVer | read-only | current | A textual string containing the firmware version of the stacking device. |
| 1.3.6.1.4.1.171.14.9.1.1.8.1.10 | ColumndStackInfoHardwareVer | read-only | current | A textual string containing the hardware version of the stacking device. |
| 1.3.6.1.4.1.171.14.9.1.1.8.1.11 | ColumndStackInfoAdminBandwidth | read-only | current | This object indicates the administrative stacking port bandwidth of the device. |
| 1.3.6.1.4.1.171.14.9.1.1.8.1.12 | ColumndStackInfoSIO1ActiveBandwidth | read-only | current | Indicates the current link bandwidth in the SIO1. onePort - only one port is linked in the SIO1. twoPorts - two ports are linked in the SIO1. linkDown - SIO1 i… |
| 1.3.6.1.4.1.171.14.9.1.1.8.1.13 | ColumndStackInfoSIO2ActiveBandwidth | read-only | current | Indicates the current link bandwidth in the SIO2. onePort - only one port is linked in the SIO2. twoPorts - two ports are linked in the SIO2. linkDown - SIO2 i… |
| 1.3.6.1.4.1.171.14.9.1.1.8.1.14 | ColumndStackInfoStartPort | read-only | current | This object indicates the starting port of this unit. |
| 1.3.6.1.4.1.171.14.9.1.1.8.1.15 | ColumndStackInfoPortRange | read-only | current | This object indicates the total ports of this unit. |
| 1.3.6.1.4.1.171.14.9.1.2 | NodedStackNotificationInfo | |||
| 1.3.6.1.4.1.171.14.9.1.2.1 | ScalardStackNotifyInfoBoxId | accessible-for-notify | current | This object indicates box ID of the notification. |
| 1.3.6.1.4.1.171.14.9.1.2.2 | ScalardStackNotifyInfoTopologyType | accessible-for-notify | current | This object indicates the current stacking topology of the notification. |
| 1.3.6.1.4.1.171.14.9.1.2.3 | ScalardStackNotifyInfoRoleChangeType | accessible-for-notify | current | This object indicates stacking role change of the notification. |
| 1.3.6.1.4.1.171.14.9.2 | NodedStackMIBConformance | |||
| 1.3.6.1.4.1.171.14.9.2.1 | NodedStackMIBCompliances | |||
| 1.3.6.1.4.1.171.14.9.2.1.1 | CompliancedStackCompliance | current | The compliance statement for entities which implement the DLINKSW-STACK-MIB. | |
| 1.3.6.1.4.1.171.14.9.2.2 | NodedStackMIBGroups | |||
| 1.3.6.1.4.1.171.14.9.2.2.1 | GroupdStackBasicMgmtGroup | current | A collection of objects provides basic management and information for stacking feature. | |
| 1.3.6.1.4.1.171.14.9.2.2.2 | GroupdStackBandwidthMgmtGroup | current | A collection of objects providing management and information for stacking port bandwidth. | |
| 1.3.6.1.4.1.171.14.9.2.2.3 | GroupdStackNotifGroup | current | A collection of notifications for indicating the status change of stacking. |