DLINKSW-SWITCHPORT-MIB
15 objects
This MIB module defines objects for per-port configuration which are not covered by standard MIB(s).
Imported Objects
| DLINK-ID-REC-MIB | dlinkIndustrialCommon |
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.14.11 | IdentitydlinkSwSwitchPortMIB | This MIB module defines objects for per-port configuration which are not covered by standard MIB(s). | ||
| 1.3.6.1.4.1.171.14.11.0 | NodedSwPortNotifications | |||
| 1.3.6.1.4.1.171.14.11.1 | NodedSwPortObjects | |||
| 1.3.6.1.4.1.171.14.11.1.1 | TabledSwPortIfTable | not-accessible | current | A list of physical port interface entries. |
| 1.3.6.1.4.1.171.14.11.1.1.1 | RowdSwPortIfEntry | not-accessible | current | An entry in dSwPortIfTable contains port-specific configuration which cannot be covered by standard MIBs (EtherLike or MAU-MIB). |
| 1.3.6.1.4.1.171.14.11.1.1.1.1 | ColumndSwPortIfB1000baseTCtrl | read-write | current | This object can be modified when port speed is configured to 1000BASE-T. other(1) - the port is not 1000BASE-T or master/slave timing mode is not specified. b1… |
| 1.3.6.1.4.1.171.14.11.1.1.1.2 | ColumndSwPortIfB10GbaseTCtrl | read-write | current | This object can be modified when port speed is configured to 10GBASE-T. other(1) - the port is not 10GBASE-T or master/slave timing mode is not specified. b10G… |
| 1.3.6.1.4.1.171.14.11.1.1.1.3 | ColumndSwPortIfMdix | read-write | current | Uses the object to configure the state of Media-Dependent Interface Crossover (MDIX) of the port. |
| 1.3.6.1.4.1.171.14.11.1.1.1.4 | ColumndSwPortIfJumboFrameSize | read-write | current | The size of the largest packet which can be received on the interface, specified in octets. |
| 1.3.6.1.4.1.171.14.11.1.1.1.5 | ColumndSwPortIfSpeedAutoDowngrade | read-write | current | This object indicates whether automatically downgrade the advertised speed in case a link cannot be established at the available speed. |
| 1.3.6.1.4.1.171.14.11.2 | NodedSwPortConformance | |||
| 1.3.6.1.4.1.171.14.11.2.1 | NodedSwPortCompliances | |||
| 1.3.6.1.4.1.171.14.11.2.1.1 | CompliancedSwPortCompliance | read-only | current | The compliance statement for entities which implement the DLINKSW-SWITCHPORT-MIB. |
| 1.3.6.1.4.1.171.14.11.2.2 | NodedSwPortGroups | |||
| 1.3.6.1.4.1.171.14.11.2.2.1 | GroupdSwPortBasicGroup | current | This group contains the collection of fundamental port configuration objects which are not covered by standard MIBs. |