DLINKSW-TIME-MIB
38 objects
This MIB module defines objects for Time and Simple Network Time Protocol (SNTP).
Imported Objects
| DLINK-ID-REC-MIB | dlinkIndustrialCommon |
| IF-MIB | InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.14.10 | IdentitydlinkSwTimeMIB | This MIB module defines objects for Time and Simple Network Time Protocol (SNTP). | ||
| 1.3.6.1.4.1.171.14.10.0 | NodedTimeMIBNotifications | |||
| 1.3.6.1.4.1.171.14.10.1 | NodedTimeMIBObjects | |||
| 1.3.6.1.4.1.171.14.10.1.1 | NodedTimeGeneral | |||
| 1.3.6.1.4.1.171.14.10.1.1.1 | ScalardTimeSntpEnabled | read-write | current | This object indicates the state of SNTP function. Setting this object to 'true' will enable SNTP function. |
| 1.3.6.1.4.1.171.14.10.1.1.2 | ScalardTimeSntpBcastClientEnabled | read-write | current | This object is used to enable/disable the broadcast client mode. Setting this object to 'true' indicates that the agent accepts broadcast SNTP traffic from ser… |
| 1.3.6.1.4.1.171.14.10.1.1.3 | ScalardTimeSntpPollInterval | read-write | current | This object indicates the interval for the SNTP client to synchronize its clock with server. |
| 1.3.6.1.4.1.171.14.10.1.1.4 | ScalardTimeSntpSourceIfIndex | read-write | current | This object indicates the ifIndex of the interface whose IP address will be used as the source address for sending the SNTP packet. A special value of 0 indica… |
| 1.3.6.1.4.1.171.14.10.1.2 | NodedTimeClock | |||
| 1.3.6.1.4.1.171.14.10.1.2.1 | ScalardTimeManagedClock | read-write | current | Use the object to manually set the system clock. |
| 1.3.6.1.4.1.171.14.10.1.2.2 | ScalardTimeCurrentTimeSource | read-only | current | The object indicates the clock source. |
| 1.3.6.1.4.1.171.14.10.1.2.3 | ScalardTimeCurrentTime | read-only | current | This object indicates the current system time. System time can be disciplined or adjusted by RTC, SNTP, or configured by user. |
| 1.3.6.1.4.1.171.14.10.1.2.5 | NodedTimeSummerTime | |||
| 1.3.6.1.4.1.171.14.10.1.2.5.1 | ScalardTimeSummerTimeAutoSwitchMode | read-write | current | This object indicates the mode of the system to automatically switch to Summer Time (Daylight Saving Time). disable(1) - The Daylight Saving Time feature is di… |
| 1.3.6.1.4.1.171.14.10.1.2.5.2 | ScalardTimeSummerTimeStart | read-write | current | This object indicates when the Summer Time starts. This value is always interpreted within the context of a dTimeSummerTimeAutoSwitchMode value. |
| 1.3.6.1.4.1.171.14.10.1.2.5.3 | ScalardTimeSummerTimeEnd | read-write | current | This object indicates when the Summer Time ends. This value is always interpreted within the context of a dTimeSummerTimeAutoSwitchMode value. |
| 1.3.6.1.4.1.171.14.10.1.2.5.4 | ScalardTimeSummerTimeOffset | read-write | current | The value of this object indicates number of minutes to add or to subtract during Summer Time. This object is not meaningful when dTimeSummerTimeAutoSwitchMode… |
| 1.3.6.1.4.1.171.14.10.1.3 | NodedTimeServer | |||
| 1.3.6.1.4.1.171.14.10.1.3.1 | ScalardTimeSntpServerTableNum | read-only | current | This object indicates the number of entries present in the dTimeSntpServerTable. |
| 1.3.6.1.4.1.171.14.10.1.3.2 | TabledTimeSntpServerTable | not-accessible | current | This table consists of a list of information for SNTP Time servers, which allow the software clock to be synchronized. |
| 1.3.6.1.4.1.171.14.10.1.3.2.1 | RowdTimeSntpServerEntry | not-accessible | current | An entry contains information about an SNTP Time server. |
| 1.3.6.1.4.1.171.14.10.1.3.2.1.1 | ColumndTimeSntpServerAddrType | not-accessible | current | This object indicates the address type of the SNTP server. |
| 1.3.6.1.4.1.171.14.10.1.3.2.1.2 | ColumndTimeSntpServerAddr | not-accessible | current | IP or IPv6 address of the time server which provides the clock synchronization. |
| 1.3.6.1.4.1.171.14.10.1.3.2.1.3 | ColumndTimeSntpServerVrfName | not-accessible | current | This object indicates the name of the routing forwarding instance. A zero length string indicates the VRF name is not specified. For the platform that doesn't … |
| 1.3.6.1.4.1.171.14.10.1.3.2.1.4 | ColumndTimeSntpServerRowStatus | read-create | current | The status of this entry. |
| 1.3.6.1.4.1.171.14.10.1.3.2.1.5 | ColumndTimeSntpServerVersion | read-only | current | This object indicates the SNTP server version. When the value of dTimeSntpServerRowStatus at the same row is notInService(2), this object is 0. |
| 1.3.6.1.4.1.171.14.10.1.3.2.1.6 | ColumndTimeSntpServerLastReceive | read-only | current | This object indicates the elapsed time that the SNTP time has been synchronized. |
| 1.3.6.1.4.1.171.14.10.1.3.2.1.7 | ColumndTimeSntpServerSynced | read-only | current | This object indicates whether the corresponding server is the current synced server. |
| 1.3.6.1.4.1.171.14.10.1.3.2.1.8 | ColumndTimeSntpServerBcast | read-only | current | This object indicates whether the server is a broadcast SNTP server. |
| 1.3.6.1.4.1.171.14.10.2 | NodedTimeMIBConformance | |||
| 1.3.6.1.4.1.171.14.10.2.1 | NodedTimeCompliances | |||
| 1.3.6.1.4.1.171.14.10.2.1.1 | CompliancedTimeCompliance | current | The compliance statement for entities which implement the DLINKSW-TIME-MIB. | |
| 1.3.6.1.4.1.171.14.10.2.2 | NodedTimeGroups | |||
| 1.3.6.1.4.1.171.14.10.2.2.1 | GroupdTimeSysInfoGroup | current | A collection of objects provides the information for system time. | |
| 1.3.6.1.4.1.171.14.10.2.2.2 | GroupdTimeClockGroup | current | A collection of objects provides configuration for system time. | |
| 1.3.6.1.4.1.171.14.10.2.2.3 | GroupdTimeSntpGroup | current | A collection of objects provides configuration for SNTP. | |
| 1.3.6.1.4.1.171.14.10.2.2.4 | GroupdTimeSummerTimeCfgGroup | current | A collection of objects provides configuration for Daylight Saving Time feature. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DlinkTimeSummerTimeValue | OCTET STRING (SIZE (0 | 5 | 6)) | current | Denotes Summer Time starts or ends time. This value is always interpreted within the context of a dTimeSummerTimeAutoSwitchMode value. When dTimeSummerTimeAutoSwitchMode is disable(1), this value is not meaningful. When… |