DMswitch-MIB
500 objects
The MIB module for DMswitch.
Imported Objects
| DATACOM-SMI | datacomAccessDevicesMIBs |
| IF-MIB | InterfaceIndex |
| P-BRIDGE-MIB | EnabledStatus |
| Q-BRIDGE-MIB | PortList |
| SNMPv2-SMI | Counter32 enterprises Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3709.3.5.201 | IdentitydmSwitchMIB | The MIB module for DMswitch. | ||
| 1.3.6.1.4.1.3709.3.5.201.1 | NodedmSwitchMIBObjects | |||
| 1.3.6.1.4.1.3709.3.5.201.1.1 | NodeswitchMgt | |||
| 1.3.6.1.4.1.3709.3.5.201.1.1.1 | ScalarswitchNumber | read-only | current | The total number of switches present on this system. |
| 1.3.6.1.4.1.3709.3.5.201.1.1.2 | TableswitchInfoTable | not-accessible | current | Table of descriptive and status information about switches in this system. |
| 1.3.6.1.4.1.3709.3.5.201.1.1.2.1 | RowswitchInfoEntry | not-accessible | current | An entry in the table, containing information about a single switch in this system. |
| 1.3.6.1.4.1.3709.3.5.201.1.1.2.1.1 | ColumnswUnitIndex | not-accessible | current | This object identifies the switch within the system for which this entry contains information. This value can never be greater than switchNumber. |
| 1.3.6.1.4.1.3709.3.5.201.1.1.2.1.2 | ColumnswHardwareVer | read-only | current | Hardware version of the main board. |
| 1.3.6.1.4.1.3709.3.5.201.1.1.2.1.3 | ColumnswBootLoaderVer | read-only | current | Loader version of the main board. |
| 1.3.6.1.4.1.3709.3.5.201.1.1.2.1.4 | ColumnswFirmwareVer | read-only | current | Operation code version of the main board. |
| 1.3.6.1.4.1.3709.3.5.201.1.1.2.1.5 | ColumnswPortNumber | read-only | current | The total port number of this switch (including expansion slot). |
| 1.3.6.1.4.1.3709.3.5.201.1.1.2.1.6 | ColumnswPowerStatus | read-only | current | Indicates the switch using internalPower(1), redundantPower(2), internalAndRedundantPower(3) or externalPower(4) |
| 1.3.6.1.4.1.3709.3.5.201.1.1.2.1.7 | ColumnswRoleInSystem | read-only | current | Indicates the switch is master(1), backupMaster(2) or slave(3) in this system. |
| 1.3.6.1.4.1.3709.3.5.201.1.1.2.1.8 | ColumnswSerialNumber | read-only | current | Serial number of the switch. |
| 1.3.6.1.4.1.3709.3.5.201.1.1.2.1.9 | ColumnswProdName | read-only | current | |
| 1.3.6.1.4.1.3709.3.5.201.1.1.2.1.10 | ColumnswProdModelId | read-only | current | Product model identifier. |
| 1.3.6.1.4.1.3709.3.5.201.1.1.2.1.11 | ColumnswFirmwareReleaseDate | read-only | current | Release date of the firmware. |
| 1.3.6.1.4.1.3709.3.5.201.1.1.2.1.12 | ColumnswTemperature | read-only | current | Temperature of the switch. |
| 1.3.6.1.4.1.3709.3.5.201.1.1.2.1.13 | ColumnswG704IntfNumber | read-only | current | The number of G704 interfaces of this switch. |
| 1.3.6.1.4.1.3709.3.5.201.1.1.2.1.14 | ColumnswE1cIntfNumber | read-only | current | The number of E1c interfaces of this switch. |
| 1.3.6.1.4.1.3709.3.5.201.1.1.2.1.15 | ColumnswBundleIntfNumber | read-only | current | The number of Bundle interfaces of this switch. |
| 1.3.6.1.4.1.3709.3.5.201.1.1.2.1.16 | ColumnswPtpIntfNumber | read-only | current | The number of PTP interfaces of this switch. |
| 1.3.6.1.4.1.3709.3.5.201.1.1.2.1.17 | ColumnswSdhIntfNumber | read-only | current | The number of SDH interfaces of this switch. |
| 1.3.6.1.4.1.3709.3.5.201.1.1.2.1.18 | ColumnswVC4Number | read-only | current | The number of VC4 interfaces of this switch. |
| 1.3.6.1.4.1.3709.3.5.201.1.1.2.1.19 | ColumnswVC12Number | read-only | current | The number of VC12 interfaces of this switch. |
| 1.3.6.1.4.1.3709.3.5.201.1.1.3 | NodeswitchProductId | |||
| 1.3.6.1.4.1.3709.3.5.201.1.1.3.2 | ScalarswProdManufacturer | read-only | current | |
| 1.3.6.1.4.1.3709.3.5.201.1.1.3.3 | ScalarswProdDescription | read-only | current | |
| 1.3.6.1.4.1.3709.3.5.201.1.1.3.5 | ScalarswProdUrl | read-only | current | |
| 1.3.6.1.4.1.3709.3.5.201.1.1.3.6 | ScalarswIdentifier | read-only | current | A unique identifier of which switch in the chassis is currently being looked at. |
| 1.3.6.1.4.1.3709.3.5.201.1.1.3.7 | ScalarswVendorId | read-only | mandatory | Vendor information. The value 0 indicates a vendor not defined. |
| 1.3.6.1.4.1.3709.3.5.201.1.1.4 | TableswitchIndivPowerTable | not-accessible | current | Table about status of individual powers. |
| 1.3.6.1.4.1.3709.3.5.201.1.1.4.1 | RowswitchIndivPowerEntry | not-accessible | current | Table about status of individual powers. |
| 1.3.6.1.4.1.3709.3.5.201.1.1.4.1.1 | ColumnswIndivPowerUnitIndex | read-only | current | This is defined as swUnitIndex. |
| 1.3.6.1.4.1.3709.3.5.201.1.1.4.1.2 | ColumnswIndivPowerIndex | read-only | current | 1 means internal power. 2 means external power. |
| 1.3.6.1.4.1.3709.3.5.201.1.1.4.1.3 | ColumnswIndivPowerStatus | read-only | current | notPresent(3) means not present. green(2) means up. red(1) means down. |
| 1.3.6.1.4.1.3709.3.5.201.1.1.5 | TableswitchIndivFanTable | not-accessible | current | Table about status of individual fans. |
| 1.3.6.1.4.1.3709.3.5.201.1.1.5.1 | RowswitchIndivFanEntry | not-accessible | current | Table about status of individual fans. |
| 1.3.6.1.4.1.3709.3.5.201.1.1.5.1.1 | ColumnswIndivFanUnitIndex | read-only | current | This is defined as swUnitIndex. |
| 1.3.6.1.4.1.3709.3.5.201.1.1.5.1.2 | ColumnswIndivFanIndex | read-only | current | |
| 1.3.6.1.4.1.3709.3.5.201.1.1.5.1.3 | ColumnswIndivFanStatus | read-only | current | red(1) means down. green(2) means up. |
| 1.3.6.1.4.1.3709.3.5.201.1.1.6 | TableswitchIndivAlarmTable | not-accessible | current | Table about status of individual alarms. |
| 1.3.6.1.4.1.3709.3.5.201.1.1.6.1 | RowswitchIndivAlarmEntry | not-accessible | current | Table about status of individual alarms. |
| 1.3.6.1.4.1.3709.3.5.201.1.1.6.1.1 | ColumnswIndivAlarmUnitIndex | read-only | current | This is defined as swUnitIndex. |
| 1.3.6.1.4.1.3709.3.5.201.1.1.6.1.2 | ColumnswIndivAlarmIndex | read-only | current | |
| 1.3.6.1.4.1.3709.3.5.201.1.1.6.1.3 | ColumnswIndivAlarmStatus | read-only | current | |
| 1.3.6.1.4.1.3709.3.5.201.1.1.7 | ScalarswitchResObj | read-write | current | |
| 1.3.6.1.4.1.3709.3.5.201.1.1.8 | ScalarswHashConfig | read-only | current | |
| 1.3.6.1.4.1.3709.3.5.201.1.1.9 | ScalarswHashStatus | read-only | current | |
| 1.3.6.1.4.1.3709.3.5.201.1.1.10 | ScalarswCpuUsage | read-only | current | The CPU usage (in hundredths of a percent) at the last minute. |
| 1.3.6.1.4.1.3709.3.5.201.1.1.11 | ScalarswMemUsage | read-only | current | The memory usage (percentage). |
| 1.3.6.1.4.1.3709.3.5.201.1.1.12 | TableswitchMacAddrUsageTable | not-accessible | current | Table about the total of used MAC addresses entries. |
| 1.3.6.1.4.1.3709.3.5.201.1.1.12.1 | RowswitchMacAddrUsageEntry | not-accessible | current | Table about the total of used MAC addresses entries. |
| 1.3.6.1.4.1.3709.3.5.201.1.1.12.1.1 | ColumnswMacAddrUnitIndex | not-accessible | current | This is defined as swUnitIndex. |
| 1.3.6.1.4.1.3709.3.5.201.1.1.12.1.2 | ColumnswMacAddrUsageValue | read-only | current | The total of used MAC addresses entries. |
| 1.3.6.1.4.1.3709.3.5.201.1.1.13 | ScalarswSlotNumber | read-only | current | The total number of interface board slots present on the device. |
| 1.3.6.1.4.1.3709.3.5.201.1.1.14 | TableswitchMpuTable | not-accessible | current | Table of descriptive and status information about MPUs in this system. |
| 1.3.6.1.4.1.3709.3.5.201.1.1.14.1 | RowswitchMpuEntry | not-accessible | current | An entry in the table, containing information about a single MPU in this system. |
| 1.3.6.1.4.1.3709.3.5.201.1.1.14.1.1 | ColumnswMpuIndex | read-only | current | This object identifies the MPU within the system for which this entry contains information. |
| 1.3.6.1.4.1.3709.3.5.201.1.1.14.1.2 | ColumnswMpuBootLoaderVer | read-only | current | Loader version of the main board. |
| 1.3.6.1.4.1.3709.3.5.201.1.1.14.1.3 | ColumnswMpuRoleInSystem | read-only | current | Indicates the MPU is active(1) or standby(2) in this system. |
| 1.3.6.1.4.1.3709.3.5.201.1.1.14.1.4 | ColumnswMpuSerialNumber | read-only | current | Serial number of the MPU. |
| 1.3.6.1.4.1.3709.3.5.201.1.1.14.1.5 | ColumnswMpuModelId | read-only | current | MPU model identifier. |
| 1.3.6.1.4.1.3709.3.5.201.1.1.15 | ScalarswHashHardware | read-only | current | |
| 1.3.6.1.4.1.3709.3.5.201.1.1.16 | TableswitchIndivAlarmOutTable | not-accessible | current | Table about status of output alarms. |
| 1.3.6.1.4.1.3709.3.5.201.1.1.16.1 | RowswitchIndivAlarmOutEntry | not-accessible | current | Table about status of output alarms. |
| 1.3.6.1.4.1.3709.3.5.201.1.1.16.1.1 | ColumnswIndivAlarmOutUnitIndex | read-only | current | This is defined as swUnitIndex. |
| 1.3.6.1.4.1.3709.3.5.201.1.1.16.1.2 | ColumnswIndivAlarmOutStatus | read-only | current | Indicates current alarm output status, as configured in external-alarm-output. |
| 1.3.6.1.4.1.3709.3.5.201.1.1.17 | ScalarswChassisModel | read-only | current | Chassis model for equipment |
| 1.3.6.1.4.1.3709.3.5.201.1.1.18 | TableswitchSessionTable | not-accessible | current | Table about CLI sessions informations. |
| 1.3.6.1.4.1.3709.3.5.201.1.1.18.1 | RowswitchSessionEntry | not-accessible | current | An entry in the table, containing information about a single switch in this system. |
| 1.3.6.1.4.1.3709.3.5.201.1.1.18.1.1 | ColumnswSessionUnitIndex | not-accessible | current | This is defined as swUnitIndex. |
| 1.3.6.1.4.1.3709.3.5.201.1.1.18.1.2 | ColumnswSessionName | read-only | current | Session username. |
| 1.3.6.1.4.1.3709.3.5.201.1.1.18.1.3 | ColumnswSessionUptime | read-only | current | Login time and date (uptime). |
| 1.3.6.1.4.1.3709.3.5.201.1.1.18.1.4 | ColumnswSessionPid | read-only | current | CLI Session Process ID. |
| 1.3.6.1.4.1.3709.3.5.201.1.1.18.1.5 | ColumnswSessionSrcIP | read-only | current | IP from process that called CLI - telnet, ssh or inetd. |
| 1.3.6.1.4.1.3709.3.5.201.1.2 | NodeportMgt | |||
| 1.3.6.1.4.1.3709.3.5.201.1.2.1 | TableportTable | not-accessible | current | Table of descriptive and status information about configuration of each switch port (including expansion slot) in this system. This table also contains informa… |
| 1.3.6.1.4.1.3709.3.5.201.1.2.1.1 | RowportEntry | not-accessible | current | An entry in the table, containing information about configuration in one switch port of the switch. |
| 1.3.6.1.4.1.3709.3.5.201.1.2.1.1.1 | ColumnportIndex | not-accessible | current | This is defined as ifIndex in the IF-MIB. |
| 1.3.6.1.4.1.3709.3.5.201.1.2.1.1.2 | ColumnportName | read-write | current | Indicates the port name. This is same as ifAlias in the IF-MIB (RFC2863 or later). |
| 1.3.6.1.4.1.3709.3.5.201.1.2.1.1.3 | ColumnportType | read-only | current | Indicates the port type. |
| 1.3.6.1.4.1.3709.3.5.201.1.2.1.1.4 | ColumnportSpeedDpxCfg | read-write | current | Set the port speed and duplex mode as follows: halfDuplex10(2) - 10Mbps and half duplex mode fullDuplex10(3) - 10Mbps and full duplex mode halfDuplex100(4) - 1… |
| 1.3.6.1.4.1.3709.3.5.201.1.2.1.1.5 | ColumnportFlowCtrlCfg | read-write | current | (1) Flow control mechanism is enabled. If the port type is hundredBaseTX or thousandBaseSX: When the port is operating in halfDuplex mode, the port uses backPr… |
| 1.3.6.1.4.1.3709.3.5.201.1.2.1.1.6 | ColumnportCapabilities | read-write | current | Port capabilities. |
| 1.3.6.1.4.1.3709.3.5.201.1.2.1.1.7 | ColumnportAutonegotiation | read-write | current | Whether autonegotiation is enabled. |
| 1.3.6.1.4.1.3709.3.5.201.1.2.1.1.8 | ColumnportSpeedDpxStatus | read-only | current | The operating speed and duplex mode of the switched port. If this index is a trunk, the speed is the speed of its individual members. If this index is a trunk … |
| 1.3.6.1.4.1.3709.3.5.201.1.2.1.1.9 | ColumnportFlowCtrlStatus | read-only | current | (2) BackPressure flow control machanism is used. (3) IEEE 802.3 flow control machanism is used. (4) Flow control mechanism is disabled. If this index is a trun… |
| 1.3.6.1.4.1.3709.3.5.201.1.2.1.1.10 | ColumnportMdiStatus | read-only | current | |
| 1.3.6.1.4.1.3709.3.5.201.1.2.1.1.11 | ColumnportTrunkIndex | read-only | current | The trunk to which this port belongs. A value of 0 means that this port does not belong to any trunk. A value greater than zero means that this port belongs to… |
| 1.3.6.1.4.1.3709.3.5.201.1.3 | NodetrunkMgt | |||
| 1.3.6.1.4.1.3709.3.5.201.1.3.1 | ScalartrunkMaxId | read-only | current | The maximum number for a trunk identifier. |
| 1.3.6.1.4.1.3709.3.5.201.1.3.2 | ScalartrunkValidNumber | read-only | current | The number of valid trunks. |
| 1.3.6.1.4.1.3709.3.5.201.1.3.3 | TabletrunkTable | not-accessible | current | Table of descriptive and status information about configuration of each trunk, similar to Cisco EtherChannel. |
| 1.3.6.1.4.1.3709.3.5.201.1.3.3.1 | RowtrunkEntry | not-accessible | current | An entry in the table, containing information about configuration in one trunk of the switch. |
| 1.3.6.1.4.1.3709.3.5.201.1.3.3.1.1 | ColumntrunkIndex | not-accessible | current | This object identifies the trunk within the switch for which this entry contains information. |
| 1.3.6.1.4.1.3709.3.5.201.1.3.3.1.2 | ColumntrunkPorts | read-create | current | The complete set of ports currently associated with this trunk. |
| 1.3.6.1.4.1.3709.3.5.201.1.3.3.1.3 | ColumntrunkCreation | read-only | current | A value of static(1) means a statically configured trunk. A value of lacp(2) means an LACP-configured trunk. |
| 1.3.6.1.4.1.3709.3.5.201.1.3.3.1.4 | ColumntrunkStatus | read-create | current | Writing this to valid(1) creates an entry. Writing this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.3709.3.5.201.1.4 | NodelacpMgt | |||
| 1.3.6.1.4.1.3709.3.5.201.1.4.1 | TablelacpPortTable | not-accessible | current | Table for LACP port configuration. |
| 1.3.6.1.4.1.3709.3.5.201.1.4.1.1 | RowlacpPortEntry | not-accessible | current | Entry for LACP port configuration. |
| 1.3.6.1.4.1.3709.3.5.201.1.4.1.1.1 | ColumnlacpPortIndex | not-accessible | current | This is defined as ifIndex in the IF-MIB. |
| 1.3.6.1.4.1.3709.3.5.201.1.4.1.1.2 | ColumnlacpPortStatus | read-write | current | Whether 802.3ad LACP is enabled. |
| 1.3.6.1.4.1.3709.3.5.201.1.5 | NodestaMgt | |||
| 1.3.6.1.4.1.3709.3.5.201.1.5.1 | ScalarstaSystemStatus | read-write | current | Global spanning tree status. (1) Spanning tree protocol is enabled. (2) Spanning tree protocol is disabled. |
| 1.3.6.1.4.1.3709.3.5.201.1.5.2 | TablestaPortTable | not-accessible | current | The table manages port settings for Spanning Tree Protocol 802.1d, 802.1w or 802.1s depending on the value specified by staProtocolType. |
| 1.3.6.1.4.1.3709.3.5.201.1.5.2.1 | RowstaPortEntry | not-accessible | current | The conceptual entry of staPortTable. |
| 1.3.6.1.4.1.3709.3.5.201.1.5.2.1.1 | ColumnstaPortIndex | not-accessible | current | The port and the trunk (excluding trunk member ports) interface of the staPortTable. The interface identified by a particular value of this index is the same i… |
| 1.3.6.1.4.1.3709.3.5.201.1.5.2.1.2 | ColumnstaPortAdminEdgePort | read-write | current | The administrative value of the edge port parameter. A value of true(1) indicates that this port should be assumed as an edge-port and a value of false(2) indi… |
| 1.3.6.1.4.1.3709.3.5.201.1.5.2.1.3 | ColumnstaPortOperEdgePort | read-only | current | The operational value of the edge port parameter. The object is initialized to the value of staPortAdminEdgePort and is set false when a BPDU is received. |
| 1.3.6.1.4.1.3709.3.5.201.1.5.2.1.4 | ColumnstaPortAdminPointToPoint | read-write | current | The administrative point-to-point status of the LAN segment attached to this port. A value of forceTrue(0) indicates that this port should always be treated as… |
| 1.3.6.1.4.1.3709.3.5.201.1.5.2.1.5 | ColumnstaPortOperPointToPoint | read-only | current | The operational point-to-point status of the LAN segment attached to this port. This indicates whether a port is considered to have a point-to-point connection… |
| 1.3.6.1.4.1.3709.3.5.201.1.5.2.1.6 | ColumnstaPortLongPathCost | read-write | current | The contribution of this port to the path cost (in 32 bits value) of paths towards the spanning tree root which include this port. This object is used to confi… |
| 1.3.6.1.4.1.3709.3.5.201.1.5.2.1.7 | ColumnstaPortSystemStatus | read-write | current | Per-port spanning tree status. (1) Spanning tree protocol is enabled. (2) Spanning tree protocol is disabled. |
| 1.3.6.1.4.1.3709.3.5.201.1.5.3 | ScalarstaProtocolType | read-write | current | The version of Spanning Tree Protocol the bridge is currently running. The value 'stp(1)' indicates the Spanning Tree Protocol is as specified in IEEE 802.1D,'… |
| 1.3.6.1.4.1.3709.3.5.201.1.6 | NodetftpMgt | |||
| 1.3.6.1.4.1.3709.3.5.201.1.6.1 | ScalartftpFile | read-write | current | The file name for TFTP transfer when a transfer is next requested via this MIB. This value is set to the zero length string when no file name has been specifie… |
| 1.3.6.1.4.1.3709.3.5.201.1.6.2 | ScalartftpFlashConfig | read-write | current | Number of flash config partition for to be used when the chosen action is the downloadToFlashConfig or the uploadFromFlashConfig. This values is set to the zer… |
| 1.3.6.1.4.1.3709.3.5.201.1.6.3 | ScalartftpServer | read-write | current | The IP address of the TFTP server for transfer when a download or upload is next requested via this MIB. This value is set to `0.0.0.0' when no IP address has … |
| 1.3.6.1.4.1.3709.3.5.201.1.6.4 | ScalartftpAction | read-write | current | When this object is set to downloadToFlashConfig(1), the device will begin download of the file specified by tftpFile from the server specified by tftpServer t… |
| 1.3.6.1.4.1.3709.3.5.201.1.7 | NoderestartMgt | |||
| 1.3.6.1.4.1.3709.3.5.201.1.7.1 | ScalarrestartFirmware | read-write | current | Number of firmware flash index for start-up. |
| 1.3.6.1.4.1.3709.3.5.201.1.7.2 | ScalarrestartConfig | read-write | current | Number of configuration flash index for start-up. |
| 1.3.6.1.4.1.3709.3.5.201.1.7.3 | ScalarrestartControl | read-write | current | Setting this object to warmBoot(2) causes the device to restart the application software with current configuration parameters saved in non-volatile memory. Se… |
| 1.3.6.1.4.1.3709.3.5.201.1.8 | NodemirrorMgt | |||
| 1.3.6.1.4.1.3709.3.5.201.1.8.1 | ScalarmirrorDestinationPort | read-write | current | Destination port for mirrored packets. This is defined as ifIndex in the IF-MIB. |
| 1.3.6.1.4.1.3709.3.5.201.1.8.2 | TablemirrorTable | not-accessible | current | Table of descriptive and status information about switches in this system. |
| 1.3.6.1.4.1.3709.3.5.201.1.8.2.1 | RowmirrorEntry | not-accessible | current | An entry in the table, containing information about a single switch in this system. |
| 1.3.6.1.4.1.3709.3.5.201.1.8.2.1.1 | ColumnmirrorSourcePort | not-accessible | current | Source port for mirrored packets. This is defined as ifIndex in the IF-MIB. |
| 1.3.6.1.4.1.3709.3.5.201.1.8.2.1.2 | ColumnmirrorType | read-create | current | If this value is rx(1), receive packets will be mirrored. If this value is tx(2), transmit packets will be mirrored. If this value is all(3), all packts will b… |
| 1.3.6.1.4.1.3709.3.5.201.1.9 | NodeigmpSnoopMgt | |||
| 1.3.6.1.4.1.3709.3.5.201.1.9.1 | ScalarigmpSnoopStatus | read-write | current | Parameter to enable or disable IGMP snooping on the device. When enabled, the device will examine IGMP packets and set up filters for IGMP ports. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.2 | ScalarigmpSnoopQuerier | read-write | current | Whether to act as querier. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.3 | ScalarigmpSnoopQueryCount | read-write | current | Maximum number of queries that have not been heard on the system before the system starts taking action to solicit reports. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.4 | ScalarigmpSnoopQueryInterval | read-write | current | Query interval. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.5 | ScalarigmpSnoopQueryMaxResponseTime | read-write | current | Timeout value (seconds) between IGMP reports received on a port for an IP Multicast Address that can pass before the system sends an IGMP Query out the port an… |
| 1.3.6.1.4.1.3709.3.5.201.1.9.6 | ScalarigmpSnoopQueryTimeout | read-write | current | Query time-out. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.7 | ScalarigmpSnoopVersion | read-write | current | Version. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.8 | TableigmpSnoopRouterCurrentTable | not-accessible | current | Table for current router ports. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.8.1 | RowigmpSnoopRouterCurrentEntry | not-accessible | current | Entry for current router ports. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.8.1.1 | ColumnigmpSnoopRouterCurrentVlanIndex | not-accessible | current | This is defined as dot1qVlanIndex in the Q-BRIDGE-MIB. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.8.1.2 | ColumnigmpSnoopRouterCurrentPorts | read-only | current | The set of ports which are current router ports. Within this list, some router ports are static router ports. Please refer to igmpSnoopRouterStaticTable. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.9 | TableigmpSnoopRouterStaticTable | not-accessible | current | Table for static router ports. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.9.1 | RowigmpSnoopRouterStaticEntry | not-accessible | current | Entry for static router ports. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.9.1.1 | ColumnigmpSnoopRouterStaticVlanIndex | not-accessible | current | This is defined as dot1qVlanIndex in the Q-BRIDGE-MIB. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.9.1.2 | ColumnigmpSnoopRouterStaticPorts | read-create | current | The set of ports which are static router ports. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.10 | TableigmpSnoopMulticastCurrentTable | not-accessible | current | Table for current multicast addresses. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.10.1 | RowigmpSnoopMulticastCurrentEntry | not-accessible | current | Entry for current multicast addresses. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.10.1.1 | ColumnigmpSnoopMulticastCurrentVlanIndex | not-accessible | current | This is defined as dot1qVlanIndex in the Q-BRIDGE-MIB. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.10.1.2 | ColumnigmpSnoopMulticastCurrentIpAddress | not-accessible | current | IP address of multicast group. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.10.1.3 | ColumnigmpSnoopMulticastCurrentPorts | read-only | current | The set of ports which are members. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.11 | TableigmpSnoopMulticastStaticTable | not-accessible | current | Table for static multicast addresses. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.11.1 | RowigmpSnoopMulticastStaticEntry | not-accessible | current | Entry for static multicast addresses. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.11.1.1 | ColumnigmpSnoopMulticastStaticVlanIndex | not-accessible | current | This is defined as dot1qVlanIndex in the Q-BRIDGE-MIB. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.11.1.2 | ColumnigmpSnoopMulticastStaticIpAddress | not-accessible | current | IP address of multicast group. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.11.1.3 | ColumnigmpSnoopMulticastStaticPorts | read-create | current | The set of ports which are static members. |
| 1.3.6.1.4.1.3709.3.5.201.1.10 | NodeipMgt | |||
| 1.3.6.1.4.1.3709.3.5.201.1.10.1 | ScalaripAddressMode | read-write | current | |
| 1.3.6.1.4.1.3709.3.5.201.1.10.2 | ScalaripDefaultGateway | read-write | current | The IP Address of the default gateway. If this value is undefined or unknown, it shall have the value 0.0.0.0. |
| 1.3.6.1.4.1.3709.3.5.201.1.10.3 | ScalaripPrimaryDnsServer | read-write | current | The IP Address of the primary DNS server. If this value is undefined or unknown, it shall have the value 0.0.0.0. |
| 1.3.6.1.4.1.3709.3.5.201.1.10.4 | ScalaripSecondaryDnsServer | read-write | current | The IP Address of the secondary DNS server. If this value is undefined or unknown, it shall have the value 0.0.0.0. |
| 1.3.6.1.4.1.3709.3.5.201.1.10.5 | ScalaripHttpState | read-write | current | Whether HTTP is enabled. |
| 1.3.6.1.4.1.3709.3.5.201.1.10.6 | ScalaripHttpPort | read-write | current | The port number for HTTP. |
| 1.3.6.1.4.1.3709.3.5.201.1.10.7 | ScalaripHttpsState | read-write | current | Whether HTTPS is enabled. |
| 1.3.6.1.4.1.3709.3.5.201.1.10.8 | ScalaripHttpsPort | read-write | current | The port number for HTTPS. |
| 1.3.6.1.4.1.3709.3.5.201.1.10.9 | ScalaripTelnetState | read-write | current | Whether telnet is enabled. |
| 1.3.6.1.4.1.3709.3.5.201.1.11 | NodebcastStormMgt | |||
| 1.3.6.1.4.1.3709.3.5.201.1.11.1 | TablebcastStormTable | not-accessible | current | Table of descriptive and status information about configuration of each switch ports(including expansion slot) in this system. |
| 1.3.6.1.4.1.3709.3.5.201.1.11.1.1 | RowbcastStormEntry | not-accessible | current | An entry in the table, containing information about configuration in one switch port of the switch. |
| 1.3.6.1.4.1.3709.3.5.201.1.11.1.1.1 | ColumnbcastStormIfIndex | not-accessible | current | This is defined as ifIndex in the IF-MIB. |
| 1.3.6.1.4.1.3709.3.5.201.1.11.1.1.2 | ColumnbcastStormStatus | read-write | current | Whether broadcast storm protection is enabled. |
| 1.3.6.1.4.1.3709.3.5.201.1.11.1.1.3 | ColumnbcastStormPacketRate | read-write | current | Broadcast storm threshold as packets per second. |
| 1.3.6.1.4.1.3709.3.5.201.1.12 | NodevlanMgt | |||
| 1.3.6.1.4.1.3709.3.5.201.1.12.1 | TablevlanTable | not-accessible | current | Table for VLAN configuration. |
| 1.3.6.1.4.1.3709.3.5.201.1.12.1.1 | RowvlanEntry | not-accessible | current | Entry for VLAN configuration. |
| 1.3.6.1.4.1.3709.3.5.201.1.12.1.1.1 | ColumnvlanIndex | not-accessible | current | Same is dot1qVlanIndex in the Q-BRIDGE-MIB. This table has only one entry - the entry for the VLAN of the management interface. |
| 1.3.6.1.4.1.3709.3.5.201.1.12.1.1.2 | ColumnvlanAddressMethod | read-write | current | Method to get the IP address. |
| 1.3.6.1.4.1.3709.3.5.201.1.13 | NodepriorityMgt | |||
| 1.3.6.1.4.1.3709.3.5.201.1.13.1 | TableprioWrrTable | not-accessible | current | Table for weighted round robin (WRR). |
| 1.3.6.1.4.1.3709.3.5.201.1.13.1.1 | RowprioWrrEntry | not-accessible | current | Entry for weighted round robin (WRR). |
| 1.3.6.1.4.1.3709.3.5.201.1.13.1.1.1 | ColumnprioWrrTrafficClass | not-accessible | current | Traffic class for this entry, as defined in dot1dTrafficClass in the Q-BRIDGE-MIB. The actual maximum depends on the hardware, and is equal to dot1dPortNumTraf… |
| 1.3.6.1.4.1.3709.3.5.201.1.13.1.1.2 | ColumnprioWrrWeight | read-write | current | Weight for this entry. |
| 1.3.6.1.4.1.3709.3.5.201.1.13.2 | ScalarprioQueueMode | read-write | current | The global status for the prioQueue. wrr(1),strict(2) |
| 1.3.6.1.4.1.3709.3.5.201.1.14 | NodetrapDestMgt | |||
| 1.3.6.1.4.1.3709.3.5.201.1.14.1 | TabletrapDestTable | not-accessible | current | A list of trap destination entries. |
| 1.3.6.1.4.1.3709.3.5.201.1.14.1.1 | RowtrapDestEntry | not-accessible | current | This entry includes a destination IP address to which to send traps for this community. |
| 1.3.6.1.4.1.3709.3.5.201.1.14.1.1.1 | ColumntrapDestAddress | not-accessible | current | The address to send traps. |
| 1.3.6.1.4.1.3709.3.5.201.1.14.1.1.2 | ColumntrapDestCommunity | read-create | current | A community to which this destination address belongs. |
| 1.3.6.1.4.1.3709.3.5.201.1.14.1.1.3 | ColumntrapDestStatus | read-create | current | Writing this to valid(1) creates an entry. Writing this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.3709.3.5.201.1.14.1.1.4 | ColumntrapDestVersion | read-create | current | This variables represent the version of the Trap we wish to send to trap Receiver, if the value is 1, mean we wish to send Version 1 trap, if the value is 2, m… |
| 1.3.6.1.4.1.3709.3.5.201.1.14.2 | NodetrapVar | |||
| 1.3.6.1.4.1.3709.3.5.201.1.14.2.1 | ScalartrapForbiddenAccessMode | accessible-for-notify | current | This variable is for trap var binding, indicated the ipfilter reject mode. web(1), snmp(2), telnet(3), ssh(4). |
| 1.3.6.1.4.1.3709.3.5.201.1.14.2.2 | ScalartrapForbiddenAccessIp | accessible-for-notify | current | This variable is for trap var binding, indicating the IP address that rejected by the ipfilter. |
| 1.3.6.1.4.1.3709.3.5.201.1.14.2.3 | ScalartrapLoginUserName | accessible-for-notify | current | This variable is for trap var binding, indicating the name used by user to logging. |
| 1.3.6.1.4.1.3709.3.5.201.1.14.2.4 | ScalartrapConfigSavePartition | accessible-for-notify | current | This variable is for trap var binding, indicating the partition witch the config was saved. |
| 1.3.6.1.4.1.3709.3.5.201.1.14.2.5 | ScalartrapSfpPresenceStatus | accessible-for-notify | current | This variable is for trap var binding, indicating the presence status of a sfp connector. |
| 1.3.6.1.4.1.3709.3.5.201.1.14.2.6 | ScalartrapInfAlarmVal | accessible-for-notify | current | This variable is for trap var binding, indicating the alarm value. deactivated(1), actived(2), unstable(3). |
| 1.3.6.1.4.1.3709.3.5.201.1.14.2.7 | ScalartrapDuplicatedIpVlan | accessible-for-notify | current | This variable is for trap var binding, indicating the vlan witch the duplicated ip was detected. |
| 1.3.6.1.4.1.3709.3.5.201.1.14.2.8 | ScalartrapDuplicatedIpAddress | accessible-for-notify | current | This variable is for trap var binding, indicating the duplicated ip address. |
| 1.3.6.1.4.1.3709.3.5.201.1.14.2.9 | ScalartrapDuplicatedIpMacAddress | accessible-for-notify | current | This variable is for trap var binding, indicating the mac address of the device that has the duplicated ip. |
| 1.3.6.1.4.1.3709.3.5.201.1.14.2.10 | ScalartrapEapsDomainName | accessible-for-notify | current | This variable is for trap var binding, indicating the eaps domain name. |
| 1.3.6.1.4.1.3709.3.5.201.1.14.2.11 | ScalartrapEapsDomainId | accessible-for-notify | current | This variable is for trap var binding, indicating the eaps domain identifier. |
| 1.3.6.1.4.1.3709.3.5.201.1.14.2.12 | ScalartrapEapsStatus | accessible-for-notify | current | This variable is for trap var binding, indicating the eaps status. idle(0), complete(1), failed(2), links-up(3), links-down(4), pre-forwarding(5). |
| 1.3.6.1.4.1.3709.3.5.201.1.14.2.13 | ScalartrapTemperature | accessible-for-notify | current | This variable is for trap var binding, indicating the temperature in degrees Celsius. |
| 1.3.6.1.4.1.3709.3.5.201.1.14.2.14 | ScalartrapFuseId | accessible-for-notify | current | This variable is for trap var binding, indicating the fuse indentifier. |
| 1.3.6.1.4.1.3709.3.5.201.1.14.2.15 | ScalartrapFuseStatus | accessible-for-notify | current | This variable is for trap var binding, indicating the fuse status. normal(1), failed(2). |
| 1.3.6.1.4.1.3709.3.5.201.1.14.2.16 | ScalartrapFansBoardPresenceStatus | accessible-for-notify | current | This variable is for trap var binding, indicating the presence status of the fans board. |
| 1.3.6.1.4.1.3709.3.5.201.1.14.2.17 | ScalartrapStandbyMpuPresenceStatus | accessible-for-notify | current | This variable is for trap var binding, indicating the presence status of the standby MPU. |
| 1.3.6.1.4.1.3709.3.5.201.1.14.2.18 | ScalartrapMacAddressMove | accessible-for-notify | current | This variable is for trap var binding, indicating the MAC address of the device that has moved. |
| 1.3.6.1.4.1.3709.3.5.201.1.14.2.19 | ScalartrapMemFree | accessible-for-notify | current | This variable is for trap var binding, indicating the total memory free(in Kbytes). |
| 1.3.6.1.4.1.3709.3.5.201.1.14.2.20 | ScalartrapBootloaderNew | accessible-for-notify | current | This variable is for trap var binding, indicating the installed bootloader version. |
| 1.3.6.1.4.1.3709.3.5.201.1.14.2.21 | ScalartrapDevNo | accessible-for-notify | current | This variable is for trap var binding, indicating the Dev no of equipment. |
| 1.3.6.1.4.1.3709.3.5.201.1.14.2.22 | ScalartrapDevLocalId | accessible-for-notify | current | This variable is for trap var binding, indicating the Serial number of remote equipment. |
| 1.3.6.1.4.1.3709.3.5.201.1.14.2.23 | ScalartrapCesopTdmStatus | accessible-for-notify | current | This variable is for trap var binding, indicating the status of TDM interface. |
| 1.3.6.1.4.1.3709.3.5.201.1.14.2.24 | ScalartrapCesopTdmRemoteStatus | accessible-for-notify | current | This variable is for trap var binding, indicating the status of remote TDM interface. |
| 1.3.6.1.4.1.3709.3.5.201.1.14.2.25 | ScalartrapCesopTdmCasStatus | accessible-for-notify | current | This variable is for trap var binding, indicating the status of CAS TDM interface. |
| 1.3.6.1.4.1.3709.3.5.201.1.14.2.26 | ScalartrapCesopTdmCrcStatus | accessible-for-notify | current | This variable is for trap var binding, indicating the status of CRC TDM interface. |
| 1.3.6.1.4.1.3709.3.5.201.1.14.2.27 | ScalartrapCesopBundleLocalTdmStatus | accessible-for-notify | current | This variable is for trap var binding, indicating the status of Local TDM in bundle interface. |
| 1.3.6.1.4.1.3709.3.5.201.1.14.2.28 | ScalartrapCesopBundleRemoteTdmStatus | accessible-for-notify | current | This variable is for trap var binding, indicating the status of Remote TDM in bundle interface. |
| 1.3.6.1.4.1.3709.3.5.201.1.14.2.29 | ScalartrapCesopBundleLocalStatus | accessible-for-notify | current | This variable is for trap var binding, indicating the status of Local bundle interface. |
| 1.3.6.1.4.1.3709.3.5.201.1.14.2.30 | ScalartrapCesopBundleRemoteStatus | accessible-for-notify | current | This variable is for trap var binding, indicating the status of Remote bundle interface. |
| 1.3.6.1.4.1.3709.3.5.201.1.14.2.31 | ScalartrapCesopBundlePktMismatchStatus | accessible-for-notify | current | This variable is for trap var binding, indicating the status of packet mismatch in bundle interface. |
| 1.3.6.1.4.1.3709.3.5.201.1.14.2.32 | ScalartrapCesopBundleNextHopStatus | accessible-for-notify | current | This variable is for trap var binding, indicating the status of Next Hop in bundle interface. |
| 1.3.6.1.4.1.3709.3.5.201.1.14.2.33 | ScalartrapCesopClockAdapLinkQuality | accessible-for-notify | current | This variable is for trap var binding, indicating the Adaptative link quality of clock interface. |
| 1.3.6.1.4.1.3709.3.5.201.1.14.2.34 | ScalartrapCesopClockSourceStatus | accessible-for-notify | current | This variable is for trap var binding, indicating the status of Clock Source interface. |
| 1.3.6.1.4.1.3709.3.5.201.1.14.2.35 | ScalartrapBroadcastStormControlStatus | accessible-for-notify | current | This variable is for trap var binding, indicating the status of broadcsat storm control at this interface. |
| 1.3.6.1.4.1.3709.3.5.201.1.14.2.36 | ScalartrapBroadcastStormControlPPS | accessible-for-notify | current | This variable is for trap var binding, indicating the current average count of broadcast packets per second at this interface. |
| 1.3.6.1.4.1.3709.3.5.201.1.14.2.37 | ScalartrapMulticastStormControlStatus | accessible-for-notify | current | This variable is for trap var binding, indicating the status of multicsat storm control at this interface. |
| 1.3.6.1.4.1.3709.3.5.201.1.14.2.38 | ScalartrapMulticastStormControlPPS | accessible-for-notify | current | This variable is for trap var binding, indicating the current average count of multicast packets per second at this interface. |
| 1.3.6.1.4.1.3709.3.5.201.1.14.2.39 | ScalartrapStatusLDP | accessible-for-notify | current | This variable is for trap var binding, indicating the status of condition the protocol LDP. |
| 1.3.6.1.4.1.3709.3.5.201.1.14.2.40 | ScalartrapIdLDP | accessible-for-notify | current | This variable is for trap var binding, indicating the entity identification the protocol LDP. |
| 1.3.6.1.4.1.3709.3.5.201.1.14.2.41 | ScalartrapStatusTunnelRSVP | accessible-for-notify | current | This variable is for trap var binding, indicating the status of condition tunnel on protocol RSVP. |
| 1.3.6.1.4.1.3709.3.5.201.1.14.2.42 | ScalartrapIdTunnelRSVP | accessible-for-notify | current | This variable is for trap var binding, indicating the entity identification the tunnel on protocol RSVP. |
| 1.3.6.1.4.1.3709.3.5.201.1.14.2.43 | ScalartrapPanelStatus | accessible-for-notify | current | This variable is for trap var binding, indicating the panel status. closed(1), open(2) |
| 1.3.6.1.4.1.3709.3.5.201.1.14.2.44 | ScalartrapLSTGroup | accessible-for-notify | current | This variable is for trap var binding, indicating the Link-state Tracking Group. |
| 1.3.6.1.4.1.3709.3.5.201.1.14.2.45 | ScalartrapMemL3Free | accessible-for-notify | current | This variable is for trap var binding, indicating the total L3 memory free(in Kbytes). |
| 1.3.6.1.4.1.3709.3.5.201.1.14.2.46 | ScalartrapActiveMpuNsfId | accessible-for-notify | current | This variable is for trap var binding, indicating the active mpu nsf-id. |
| 1.3.6.1.4.1.3709.3.5.201.1.14.2.47 | ScalartrapStandByMpuNsfId | accessible-for-notify | current | This variable is for trap var binding, indicating the standby mpu nsf-id. |
| 1.3.6.1.4.1.3709.3.5.201.1.14.2.48 | ScalartrapErpsDomainName | accessible-for-notify | current | This variable is for trap var binding, indicating the erps domain name. |
| 1.3.6.1.4.1.3709.3.5.201.1.14.2.49 | ScalartrapErpsDomainId | accessible-for-notify | current | This variable is for trap var binding, indicating the erps domain identifier. |
| 1.3.6.1.4.1.3709.3.5.201.1.14.2.50 | ScalartrapErpsStatus | accessible-for-notify | current | This variable is for trap var binding, indicating the erps status. init(1), idle(2), protection(3). |
| 1.3.6.1.4.1.3709.3.5.201.1.14.2.51 | ScalartrapCfmMdName | accessible-for-notify | current | This variable is for trap var binding, indicating the Maintenance Domain (MD) name that originated the trap. |
| 1.3.6.1.4.1.3709.3.5.201.1.14.2.52 | ScalartrapCfmMaName | accessible-for-notify | current | This variable is for trap var binding, indicating the Maintenance Association (MA) name that originated the trap. |
| 1.3.6.1.4.1.3709.3.5.201.1.14.2.53 | ScalartrapCfmMepId | accessible-for-notify | current | This variable is for trap var binding, indicating the Maintenance End Point ID (MEPID) that originated the trap. |
| 1.3.6.1.4.1.3709.3.5.201.1.14.2.54 | ScalartrapCfmVlan | accessible-for-notify | current | This variable is for trap var binding, indicating the VLAN that originated the trap. |
| 1.3.6.1.4.1.3709.3.5.201.1.14.2.55 | ScalartrapCfmDefect | accessible-for-notify | current | This variable is for trap var binding, indicating the defect condition being notified . defNone(0), defRDICCM(1), defMACstatus(2), defRemoteCCM(3), defErrorCCM… |
| 1.3.6.1.4.1.3709.3.5.201.1.14.2.56 | ScalartrapEvcName | accessible-for-notify | current | This variable is for trap var binding, indicating the EVC name. |
| 1.3.6.1.4.1.3709.3.5.201.1.14.2.57 | ScalartrapEvcStatus | accessible-for-notify | current | This variable is for trap var binding, indicating the status of EVC being notified, notActive(0), newAndNotActive(1), active(2), newAndActive(3), partiallyActi… |
| 1.3.6.1.4.1.3709.3.5.201.1.14.2.58 | ScalartrapSyncSystemClockStatus | accessible-for-notify | current | This variable is for trap var binding, indicating the status of system clock |
| 1.3.6.1.4.1.3709.3.5.201.1.14.2.59 | ScalartrapCesopG704ClockSourceStatus | accessible-for-notify | current | This variable is for trap var binding, indicating the status of g704 clock source. |
| 1.3.6.1.4.1.3709.3.5.201.1.14.2.60 | ScalartrapSystemWarningsUnits | accessible-for-notify | current | This variable is for trap var binding, indicating the system warnings units. |
| 1.3.6.1.4.1.3709.3.5.201.1.14.2.61 | ScalartrapSensorGroup | accessible-for-notify | current | This variable indicates the sensor's type informed in notification. |
| 1.3.6.1.4.1.3709.3.5.201.1.16 | NoderateLimitMgt | |||
| 1.3.6.1.4.1.3709.3.5.201.1.16.1 | TablerateLimitPortTable | not-accessible | current | Table for rate limit of each port. |
| 1.3.6.1.4.1.3709.3.5.201.1.16.1.1 | RowrateLimitPortEntry | not-accessible | current | Entry for rate limit of each port. |
| 1.3.6.1.4.1.3709.3.5.201.1.16.1.1.1 | ColumnrlPortIndex | not-accessible | current | The port and the trunk (including trunk member) interface of the portTable. The interface identified by a particular value of this index is the same interface … |
| 1.3.6.1.4.1.3709.3.5.201.1.16.1.1.2 | ColumnrlPortInputStatus | read-write | current | Whether input rate limit is enabled for this port. |
| 1.3.6.1.4.1.3709.3.5.201.1.16.1.1.3 | ColumnrlPortOutputStatus | read-write | current | Whether output rate limit is enabled for this port. |
| 1.3.6.1.4.1.3709.3.5.201.1.16.1.1.4 | ColumnrlPortInputRate | read-write | current | Rate-limit in kilobits per second. Must be multiple of 64. |
| 1.3.6.1.4.1.3709.3.5.201.1.16.1.1.5 | ColumnrlPortInputBurst | read-write | current | Maximum burst size in kilobits. Must be power of 2. |
| 1.3.6.1.4.1.3709.3.5.201.1.16.1.1.6 | ColumnrlPortOutputRate | read-write | current | Rate-limit in kilobits per second. Must be multiple of 64. |
| 1.3.6.1.4.1.3709.3.5.201.1.16.1.1.7 | ColumnrlPortOutputBurst | read-write | current | Maximum burst size in kilobits. Must be power of 2. |
| 1.3.6.1.4.1.3709.3.5.201.1.17 | NodesecurityMgt | |||
| 1.3.6.1.4.1.3709.3.5.201.1.17.1 | NoderadiusMgt | |||
| 1.3.6.1.4.1.3709.3.5.201.1.17.1.2 | ScalarradiusServerPortNumber | read-write | current | IP port number of RADIUS server. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.1.3 | ScalarradiusServerKey | read-write | current | Key for RADIUS. This variable can only be written. When this variable is read, it always returns a zero-length string. when this variable is written, it's max … |
| 1.3.6.1.4.1.3709.3.5.201.1.17.1.4 | ScalarradiusServerRetransmit | read-write | current | Maximum number of retransmissions for RADIUS. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.1.5 | ScalarradiusServerTimeout | read-write | current | Timeout for RADIUS. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.1.7 | TableradiusMultipleServerTable | not-accessible | current | The table for multiple RADIUS server. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.1.7.1 | RowradiusMultipleServerEntry | not-accessible | current | The conceptual row for radiusMultipleServerTable. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.1.7.1.1 | ColumnradiusMultipleServerIndex | not-accessible | current | The RADIUS multiple server index. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.1.7.1.2 | ColumnradiusMultipleServerAddress | read-create | current | IP address of a multiple RADIUS server. IP address will be set to system default value(e.g. 10.1.0.1) after creates an entry first by setting radiusMultipleSer… |
| 1.3.6.1.4.1.3709.3.5.201.1.17.1.7.1.3 | ColumnradiusMultipleServerPortNumber | read-create | current | IP port number of a multiple RADIUS server. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.1.7.1.4 | ColumnradiusMultipleServerKey | read-write | current | Key for RADIUS. This variable can only be written. When this variable is read, it always returns a zero-length string. when this variable is written, it's max … |
| 1.3.6.1.4.1.3709.3.5.201.1.17.1.7.1.5 | ColumnradiusMultipleServerRetransmit | read-write | current | Maximum number of retransmissions for RADIUS. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.1.7.1.6 | ColumnradiusMultipleServerTimeout | read-write | current | Timeout for RADIUS. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.1.7.1.8 | ColumnradiusMultipleServerStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.2 | NodesshMgt | |||
| 1.3.6.1.4.1.3709.3.5.201.1.17.2.1 | ScalarsshServerStatus | read-write | current | The status of Secure Shell Server. Set this value to enabled(1) to enable SSH server, set this value to disabled(2) to disable the SSH server. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.2.2 | ScalarsshServerMajorVersion | read-only | current | The major version of the SSH Server. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.2.3 | ScalarsshServerMinorVersion | read-only | current | The minor version of the SSH Server. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.2.4 | ScalarsshTimeout | read-write | current | The time interval that the router waits for the SSH client to respond. The range is 1-120. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.2.5 | ScalarsshKeySize | read-write | current | The SSH server key size. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.2.6 | ScalarsshRsaHostKey | read-only | current | The RSA host key. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.2.7 | ScalarsshDsaHostKey | read-only | current | The DSA host key. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.2.8 | ScalarsshHostKeyGenAction | read-write | current | This variable is for host key generating. For the set behavior: Set it to genRsaKey(2) to generate the RSA host key, and to genDsaKey(3) to generate the DSA ho… |
| 1.3.6.1.4.1.3709.3.5.201.1.17.2.9 | ScalarsshHostKeyDelAction | read-write | current | To delete the host key. For the set behavior: Set it to delRsaKey(2) to delete the RSA host key, to delDsaKey(3) to delete the DSA host key, or to delBothKeys(… |
| 1.3.6.1.4.1.3709.3.5.201.1.17.3 | NodeipFilterMgt | |||
| 1.3.6.1.4.1.3709.3.5.201.1.17.3.1 | TableipFilterSnmpTable | not-accessible | current | A list of IP address entries. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.3.1.1 | RowipFilterSnmpEntry | not-accessible | current | This entry includes an IP address range which the system will allow to connect to this device through SNMP. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.3.1.1.1 | ColumnipFilterSnmpAddress | not-accessible | current | The start IP address. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.3.1.1.2 | ColumnipFilterSnmpMask | not-accessible | current | The IP mask. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.3.1.1.3 | ColumnipFilterSnmpStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.3.2 | TableipFilterHTTPTable | not-accessible | current | A list of IP address entries. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.3.2.1 | RowipFilterHTTPEntry | not-accessible | current | This entry includes an IP address range which the system will allow to connect to this device through SNMP. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.3.2.1.1 | ColumnipFilterHTTPAddress | not-accessible | current | The start IP address. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.3.2.1.2 | ColumnipFilterHTTPMask | not-accessible | current | The IP mask. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.3.2.1.3 | ColumnipFilterHTTPStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.3.3 | TableipFilterTelnetTable | not-accessible | current | A list of IP address entries. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.3.3.1 | RowipFilterTelnetEntry | not-accessible | current | This entry includes an IP address range which the system will allow them to connect to this device through SNMP. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.3.3.1.1 | ColumnipFilterTelnetAddress | not-accessible | current | The start IP address. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.3.3.1.2 | ColumnipFilterTelnetMask | not-accessible | current | The IP mask. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.3.3.1.3 | ColumnipFilterTelnetStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.3.4 | TableipFilterSSHTable | not-accessible | current | A list of IP address entries. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.3.4.1 | RowipFilterSSHEntry | not-accessible | current | This entry includes an IP address range which the system will allow them to connect to this device through SNMP. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.3.4.1.1 | ColumnipFilterSSHAddress | not-accessible | current | The start IP address. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.3.4.1.2 | ColumnipFilterSSHMask | not-accessible | current | The IP mask. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.3.4.1.3 | ColumnipFilterSSHStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.3709.3.5.201.1.19 | NodesysLogMgt | |||
| 1.3.6.1.4.1.3709.3.5.201.1.19.1 | ScalarsysLogStatus | read-write | current | Whether system log is enabled. |
| 1.3.6.1.4.1.3709.3.5.201.1.19.2 | ScalarsysLogHistoryFlashLevel | read-write | current | Severity level for logging to flash. |
| 1.3.6.1.4.1.3709.3.5.201.1.19.3 | ScalarsysLogHistoryRamLevel | read-write | current | Severity level for logging to RAM. |
| 1.3.6.1.4.1.3709.3.5.201.1.19.6 | NoderemoteLogMgt | |||
| 1.3.6.1.4.1.3709.3.5.201.1.19.6.1 | ScalarremoteLogStatus | read-write | current | Whether the remote log system is enabled. |
| 1.3.6.1.4.1.3709.3.5.201.1.19.6.2 | ScalarremoteLogLevel | read-write | current | Severity level for remote log. |
| 1.3.6.1.4.1.3709.3.5.201.1.19.6.3 | ScalarremoteLogFacilityType | read-write | current | The FacilityType for remote log. |
| 1.3.6.1.4.1.3709.3.5.201.1.19.6.4 | TableremoteLogServerTable | not-accessible | current | A Table for storing the remote log Server list. |
| 1.3.6.1.4.1.3709.3.5.201.1.19.6.4.1 | RowremoteLogServerEntry | not-accessible | current | A conceptually row for remoteLogServerTable. |
| 1.3.6.1.4.1.3709.3.5.201.1.19.6.4.1.1 | ColumnremoteLogServerIp | read-create | current | The IP address of the remote log Server. |
| 1.3.6.1.4.1.3709.3.5.201.1.19.6.4.1.2 | ColumnremoteLogServerStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.3709.3.5.201.1.20 | NodesysTimeMgt | |||
| 1.3.6.1.4.1.3709.3.5.201.1.20.1 | NodesntpMgt | |||
| 1.3.6.1.4.1.3709.3.5.201.1.20.1.1 | ScalarsntpStatus | read-write | current | Set enabled(1) to enable the SNTP, set disabled(2) to disable the SNTP. |
| 1.3.6.1.4.1.3709.3.5.201.1.20.1.2 | ScalarsntpPollInterval | read-write | current | Polling interval. |
| 1.3.6.1.4.1.3709.3.5.201.1.20.1.3 | TablesntpServerTable | not-accessible | current | Table for SNTP servers |
| 1.3.6.1.4.1.3709.3.5.201.1.20.1.3.1 | RowsntpServerEntry | not-accessible | current | Entry for SNTP servers. |
| 1.3.6.1.4.1.3709.3.5.201.1.20.1.3.1.1 | ColumnsntpServerIp | read-create | current | The IP address of a server. |
| 1.3.6.1.4.1.3709.3.5.201.1.20.1.3.1.2 | ColumnsntpServerStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.3709.3.5.201.1.20.2 | ScalarsysCurrentTime | read-write | current | It is a text string in the following form, based on Unix: 'Mmm _d hh:mm:ss yyyy'. 'Mmm' is the first three letters of the English name of the month. '_d' is th… |
| 1.3.6.1.4.1.3709.3.5.201.1.20.3 | ScalarsysTimeZone | read-write | current | It is a text string in the following form: '[s]hh:mm'. '[s]' is a plus-or-minus sign. For UTC, this is omitted. For a positive offset, this is '+'. For a negat… |
| 1.3.6.1.4.1.3709.3.5.201.1.20.4 | ScalarsysTimeZoneName | read-write | current | The name of the time zone. |
| 1.3.6.1.4.1.3709.3.5.201.1.21 | NodefileMgt | |||
| 1.3.6.1.4.1.3709.3.5.201.1.21.1 | TablefileInfoTable | not-accessible | current | This table contain the information of the file system; we can also perform the delete, set startup file operation. |
| 1.3.6.1.4.1.3709.3.5.201.1.21.1.1 | RowfileInfoEntry | not-accessible | current | A conceptually row for fileInfoTable. |
| 1.3.6.1.4.1.3709.3.5.201.1.21.1.1.1 | ColumnfileInfoUnitID | not-accessible | current | The switch unit in a stacking system, in a non-stacking system, this value is always 1. |
| 1.3.6.1.4.1.3709.3.5.201.1.21.1.1.2 | ColumnfileInfoFileIndex | not-accessible | current | |
| 1.3.6.1.4.1.3709.3.5.201.1.21.1.1.3 | ColumnfileInfoFlashId | read-only | current | |
| 1.3.6.1.4.1.3709.3.5.201.1.21.1.1.4 | ColumnfileInfoFileName | read-only | current | The file Name of the file System in the device. |
| 1.3.6.1.4.1.3709.3.5.201.1.21.1.1.5 | ColumnfileInfoFileType | read-only | current | The file type of the file System in the device. |
| 1.3.6.1.4.1.3709.3.5.201.1.21.1.1.6 | ColumnfileInfoIsStartUp | read-write | current | This flag indicate whether this file is a startup file. Set this object to true(1) to indicate that this is a startup file. Setting this object to false(2) is … |
| 1.3.6.1.4.1.3709.3.5.201.1.21.1.1.7 | ColumnfileInfoFileSize | read-only | current | The sizes (in bytes) of the file. |
| 1.3.6.1.4.1.3709.3.5.201.1.21.1.1.8 | ColumnfileInfoCreationTime | read-only | current | The creation time of the file, This is a text string in the following form, based on Unix: 'Mmm _d hh:mm:ss yyyy'. 'Mmm' are the first three letters of the Eng… |
| 1.3.6.1.4.1.3709.3.5.201.1.21.1.1.9 | ColumnfileInfoDelete | read-write | current | Write this object to delete(2) to delete a file, when read, this always return noDelete(1). |
| 1.3.6.1.4.1.3709.3.5.201.1.22 | NodecountMgt | |||
| 1.3.6.1.4.1.3709.3.5.201.1.22.1 | TablecountHoldPktsTable | not-accessible | current | Table of dropped packets counters by interface for QoS statistics. |
| 1.3.6.1.4.1.3709.3.5.201.1.22.1.1 | RowcountHoldPktsEntry | not-accessible | current | An entry in the table, containing the number of dropped packets in a single interface. |
| 1.3.6.1.4.1.3709.3.5.201.1.22.1.1.1 | ColumninterfaceNumber | read-only | current | Interface Number from dropped packets. |
| 1.3.6.1.4.1.3709.3.5.201.1.22.1.1.2 | ColumncountHoldPkts | read-only | current | Counter Hold shows the number of dropped packets in a single interface. |
| 1.3.6.1.4.1.3709.3.5.201.1.23 | NodefilterCounterMgt | |||
| 1.3.6.1.4.1.3709.3.5.201.1.23.1 | TablefilterCounterInfoTable | not-accessible | current | This table contain the description about counters, so they can be used to measure performance from user-based filters. |
| 1.3.6.1.4.1.3709.3.5.201.1.23.1.1 | RowfilterCounterInfoEntry | not-accessible | current | A conceptually row for filterCounterInfoTable. |
| 1.3.6.1.4.1.3709.3.5.201.1.23.1.1.1 | ColumnfilterCounterInfoIndex | read-only | current | Index for counter, matches current CLI information |
| 1.3.6.1.4.1.3709.3.5.201.1.23.1.1.2 | ColumnfilterCounterInfoRemark | read-only | current | Remark is a textual description, as configured by user. |
| 1.3.6.1.4.1.3709.3.5.201.1.23.2 | TablefilterCounterValueTable | not-accessible | current | This table contains current values for filter counters. |
| 1.3.6.1.4.1.3709.3.5.201.1.23.2.1 | RowfilterCounterValueEntry | not-accessible | current | A conceptually row for filterCounterValueTable. |
| 1.3.6.1.4.1.3709.3.5.201.1.23.2.1.1 | ColumnfilterCounterValueIndex | read-only | current | Subcounters index identifies each internal counter that a user-editable counter can have. Internal counters may differ from equipament model to other. |
| 1.3.6.1.4.1.3709.3.5.201.1.23.2.1.2 | ColumnfilterCounterValue | read-only | current | The total number of data which matches internal subcounter. It can be bytes or packets, according to equipment configuration. Discontinuities in the value of t… |
| 1.3.6.1.4.1.3709.3.5.201.1.24 | NodeeapsMgt | |||
| 1.3.6.1.4.1.3709.3.5.201.1.24.1 | TableeapsInfoTable | not-accessible | current | This table contains EAPS information about all EAPS domains on this device. |
| 1.3.6.1.4.1.3709.3.5.201.1.24.1.1 | RoweapsInfoEntry | not-accessible | current | An individual entry of this table contains EAPS information related to that EAPS domain. |
| 1.3.6.1.4.1.3709.3.5.201.1.24.1.1.1 | ColumneapsInfoId | read-only | current | This indicates the mode of the EAPS Id. |
| 1.3.6.1.4.1.3709.3.5.201.1.24.1.1.2 | ColumneapsInfoName | read-only | current | The EAPS domain name. |
| 1.3.6.1.4.1.3709.3.5.201.1.24.1.1.3 | ColumneapsInfoMode | read-only | current | This indicates the mode of the EAPS domain. |
| 1.3.6.1.4.1.3709.3.5.201.1.24.1.1.4 | ColumneapsInfoState | read-only | current | This indicates the current EAPS state of this EAPS domain. |
| 1.3.6.1.4.1.3709.3.5.201.1.25 | NodecfmProbeMgmt | |||
| 1.3.6.1.4.1.3709.3.5.201.1.25.1 | TablecfmProbeDmTable | not-accessible | current | This table contains CFM delay measurements informationS. |
| 1.3.6.1.4.1.3709.3.5.201.1.25.1.1 | RowcfmProbeDmEntry | not-accessible | current | An individual entry of this table contains CFM delay measurements information related to that probe. |
| 1.3.6.1.4.1.3709.3.5.201.1.25.1.1.1 | ColumncfmProbeDmIndex | read-only | current | The index value used to identify the probe. |
| 1.3.6.1.4.1.3709.3.5.201.1.25.1.1.2 | ColumncfmProbeDmAvgDelay | read-only | current | The average delay in microseconds of CFM delay measurement. |
| 1.3.6.1.4.1.3709.3.5.201.1.25.1.1.3 | ColumncfmProbeDmAvgJitter | read-only | current | The average jitter in microseconds of CFM delay measurement. |
| 1.3.6.1.4.1.3709.3.5.201.1.25.1.1.4 | ColumncfmProbeDmLoss | read-only | current | The percentage of CFM frames lost on the indicate probe. |
| 1.3.6.1.4.1.3709.3.5.201.1.26 | NodecpumonMgmt | |||
| 1.3.6.1.4.1.3709.3.5.201.1.26.1 | TablecpuActiveUsageTable | not-accessible | current | Table of cpu usage. |
| 1.3.6.1.4.1.3709.3.5.201.1.26.1.1 | RowcpuActiveUsageEntry | not-accessible | current | Table of cpu usage. |
| 1.3.6.1.4.1.3709.3.5.201.1.26.1.1.1 | ColumncpuActiveUsageIndex | not-accessible | current | This object identifies the switch within the system for which this entry contains information. This value can never be greater than switchNumber. |
| 1.3.6.1.4.1.3709.3.5.201.1.26.1.1.2 | ColumncpuActiveUsageValue | read-only | current | The CPU usage (in hundredths of a percent). |
| 1.3.6.1.4.1.3709.3.5.201.1.26.2 | TablememActiveUsageTable | not-accessible | current | Table of memory usage. |
| 1.3.6.1.4.1.3709.3.5.201.1.26.2.1 | RowmemActiveUsageEntry | not-accessible | current | Table of memory usage. |
| 1.3.6.1.4.1.3709.3.5.201.1.26.2.1.1 | ColumnmemActiveUsageIndex | not-accessible | current | This object identifies the switch within the system for which this entry contains information. This value can never be greater than switchNumber. |
| 1.3.6.1.4.1.3709.3.5.201.1.26.2.1.2 | ColumnmemActiveUsageValue | read-only | current | The memory usage (percentage). |
| 1.3.6.1.4.1.3709.3.5.201.1.26.3 | TablecpuStandbyUsageTable | not-accessible | current | Table of cpu usage. |
| 1.3.6.1.4.1.3709.3.5.201.1.26.3.1 | RowcpuStandbyUsageEntry | not-accessible | current | Table of cpu usage. |
| 1.3.6.1.4.1.3709.3.5.201.1.26.3.1.1 | ColumncpuStandbyUsageIndex | not-accessible | current | This object identifies the switch within the system for which this entry contains information. This value can never be greater than switchNumber. |
| 1.3.6.1.4.1.3709.3.5.201.1.26.3.1.2 | ColumncpuStandbyUsageValue | read-only | current | The CPU usage (in hundredths of a percent). |
| 1.3.6.1.4.1.3709.3.5.201.1.26.4 | TablememStandbyUsageTable | not-accessible | current | Table of memory usage. |
| 1.3.6.1.4.1.3709.3.5.201.1.26.4.1 | RowmemStandbyUsageEntry | not-accessible | current | Table of memory usage. |
| 1.3.6.1.4.1.3709.3.5.201.1.26.4.1.1 | ColumnmemStandbyUsageIndex | not-accessible | current | This object identifies the switch within the system for which this entry contains information. This value can never be greater than switchNumber. |
| 1.3.6.1.4.1.3709.3.5.201.1.26.4.1.2 | ColumnmemStandbyUsageValue | read-only | current | The memory usage (percentage). |
| 1.3.6.1.4.1.3709.3.5.201.1.27 | NodequeuePortMgmt | |||
| 1.3.6.1.4.1.3709.3.5.201.1.27.1 | TablequeuePortTable | not-accessible | current | Table for statistics of interface queues. |
| 1.3.6.1.4.1.3709.3.5.201.1.27.1.1 | RowqueuePortEntry | not-accessible | current | An entry in the table, containing information about configuration in one switch port of the switch. |
| 1.3.6.1.4.1.3709.3.5.201.1.27.1.1.1 | ColumnqueuePortIfIndex | not-accessible | current | This is defined as ifIndex in the IF-MIB. |
| 1.3.6.1.4.1.3709.3.5.201.1.27.1.1.2 | ColumnqueuePortQueueIndex | not-accessible | current | The COS queue from the interface. |
| 1.3.6.1.4.1.3709.3.5.201.1.27.1.1.3 | ColumnqueuePortSentPackets | read-only | current | Counter of sent packets. |
| 1.3.6.1.4.1.3709.3.5.201.1.27.1.1.4 | ColumnqueuePortSentBytes | read-only | current | Counter of sent bytes. |
| 1.3.6.1.4.1.3709.3.5.201.1.27.1.1.5 | ColumnqueuePortDroppedPackets | read-only | current | Counter of dropped packets. |
| 1.3.6.1.4.1.3709.3.5.201.1.27.1.1.6 | ColumnqueuePortDroppedBytes | read-only | current | Counter of dropped bytes. |
| 1.3.6.1.4.1.3709.3.5.201.1.28 | NodeddTransceiversMgmt | |||
| 1.3.6.1.4.1.3709.3.5.201.1.28.1 | TableddTransceiversTable | not-accessible | current | Transceivers digital diagnostic table. |
| 1.3.6.1.4.1.3709.3.5.201.1.28.1.1 | RowddTransceiversEntry | not-accessible | current | An entry in the table, containing information about digital diagnostic. |
| 1.3.6.1.4.1.3709.3.5.201.1.28.1.1.1 | ColumnddTransceiversIfIndex | not-accessible | current | This is defined as ifIndex in the IF-MIB. |
| 1.3.6.1.4.1.3709.3.5.201.1.28.1.1.2 | ColumnddTransceiversTemperature | read-only | current | Transceiver temperature information in Celsius |
| 1.3.6.1.4.1.3709.3.5.201.1.28.1.1.3 | ColumnddTransceiversVcc3v3 | read-only | current | Transceiver Vcc 3v3 information in Volts |
| 1.3.6.1.4.1.3709.3.5.201.1.28.1.1.4 | ColumnddTransceiversRxPower | read-only | current | Transceiver rx power information in Decibels |
| 1.3.6.1.4.1.3709.3.5.201.1.28.1.1.5 | ColumnddTransceiversTxPower | read-only | current | Transceiver tx power information in Decibels |
| 1.3.6.1.4.1.3709.3.5.201.1.28.1.1.6 | ColumnddTransceiversTxBias | read-only | current | Transceiver tx bias information in Amperes |
| 1.3.6.1.4.1.3709.3.5.201.1.28.1.1.7 | ColumnddTransceiversTemperatureValue | read-only | current | Transceiver temperature infomation |
| 1.3.6.1.4.1.3709.3.5.201.1.28.1.1.8 | ColumnddTransceiversVcc3v3Value | read-only | current | Transceiver Vcc 3v3 infomation |
| 1.3.6.1.4.1.3709.3.5.201.1.28.1.1.9 | ColumnddTransceiversRxPowerValue | read-only | current | Transceiver rx power infomation |
| 1.3.6.1.4.1.3709.3.5.201.1.28.1.1.10 | ColumnddTransceiversTxPowerValue | read-only | current | Transceiver tx power infomation |
| 1.3.6.1.4.1.3709.3.5.201.1.28.1.1.11 | ColumnddTransceiversTxBiasValue | read-only | current | Transceiver tx bias infomation |
| 1.3.6.1.4.1.3709.3.5.201.2 | NodedmSwitchNotifications | |||
| 1.3.6.1.4.1.3709.3.5.201.2.1 | NodedmSwitchTraps | |||
| 1.3.6.1.4.1.3709.3.5.201.2.1.0 | NodedmSwitchTrapsPrefix | |||
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40001 | NotificationswLoginFailTrap | current | This trap is sent when an user try logging with a incorrect username or password. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40002 | NotificationswLoginSucessTrap | current | This trap is sent when an user get logging. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40003 | NotificationswStackAttachTrap | current | This trap is sent when a device is attached in stack. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40004 | NotificationswStackDetachTrap | current | This trap is sent when a device is detached from stack. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40005 | NotificationswForbiddenAccessTrap | current | This trap is sent when an incorrect IP address is rejected by the ipfilter. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40006 | NotificationswSfpPresenceTrap | current | This trap is sent when a sfp conector is taken off or placed. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40007 | NotificationswConfigChangeTrap | current | This trap is sent when the device's config change. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40008 | NotificationswConfigSaveTrap | current | This trap is sent when the device's config is saved. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40009 | NotificationswFanStatusChangeTrap | current | This trap is sent when the status of one fan changes. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40010 | NotificationswTrapsLostTrap | current | This trap is sent when one or more traps are discarded. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40011 | NotificationswPowerStatusChangeTrap | current | This trap is sent when the status of one PSU changes. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40012 | NotificationswAlarmTrap | current | This trap is sent when the status of one alarm changes. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40013 | NotificationswDuplicatedIp | current | This trap is sent when a duplicate ip is detected. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40014 | NotificationswLoopbackOnPortDetected | current | This trap is sent when a loopback on port is detected. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40015 | NotificationswLoopbackOnPortNoMoreDetected | current | This trap is sent when a loopback on port is no more detected. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40016 | NotificationswUnidirLinkDetected | current | This trap is sent when a unidirectional link on port is detected. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40017 | NotificationswUnidirLinkRecovered | current | This trap is sent when a unidirectional link on port is recovered. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40018 | NotificationswCriticalEventDetected | current | This trap is sent when a critical event on port is detected. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40019 | NotificationswCriticalEventRecovered | current | This trap is sent when a critical event on port is recovered. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40020 | NotificationswLinkFlapDetected | current | This trap is sent when a link-flap on port is detected. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40021 | NotificationswLinkFlapNoMoreDetected | current | This trap is sent when a link-flap on port is no more detected. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40022 | NotificationswEapsStatusChange | current | This trap is sent when the eaps status change. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40023 | NotificationswPortSecurityViolation | current | This trap is sent when a port-security violation happens. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40024 | NotificationswHighTemperatureDetected | current | This trap is sent when a high temperature is detected. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40025 | NotificationswHighTemperatureNoMoreDetected | current | This trap is sent when a high temperature is no more detected. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40026 | NotificationswFuseStatusChange | current | This trap is sent when the status of on fuse changes. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40027 | NotificationswFansBoardPresenceTrap | current | This trap is sent when the fans board is taken off or placed. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40028 | NotificationswStandbyMpuTrap | current | This trap is sent when the standby MPU is taken off or placed. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40029 | NotificationswNonHomologSfpTrap | current | This trap is sent when a non-homologated SFP is placed. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40030 | NotificationswHighCpuUsageDetected | current | This trap is sent when the CPU utilization is greater than 90%. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40031 | NotificationswHighCpuUsageNoMoreDetected | current | This trap is sent when the CPU utilization is lower than 90%. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40032 | NotificationswDuplicatedMac | current | This trap is sent when a MAC address move is detected. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40033 | NotificationswHighMemoryUsageDetected | current | This trap is sent when the memory utilization is critical. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40034 | NotificationswHighMemoryUsageNoMoreDetected | current | This trap is sent when the memory utilization is normal. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40035 | NotificationswNewBootloaderVersion | current | This trap is sent when a new bootloader version is saved. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40036 | NotificationswCesopTdmStatusTrap | current | This trap is sent when TDM status change. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40037 | NotificationswCesopTdmRemoteStatusTrap | current | This trap is sent when TDM Remote status change (RALM). | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40038 | NotificationswCesopTdmCasStatusTrap | current | This trap is sent when TDM Cas status change (LOM). | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40039 | NotificationswCesopTdmCrcStatusTrap | current | This trap is sent when TDM CRC status change (CRC). | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40040 | NotificationswCesopBundleLocalTdmStatusTrap | current | This trap is sent when Bundle Local TDM status change. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40041 | NotificationswCesopBundleRemoteTdmStatusTrap | current | This trap is sent when Bundle Remote TDM status change. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40042 | NotificationswCesopBundleLocalStatusTrap | current | This trap is sent when Bundle Local status change. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40043 | NotificationswCesopBundleRemoteStatusTrap | current | This trap is sent when Bundle Remote status change. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40044 | NotificationswCesopBundlePktMismatchTrap | current | This trap is sent when Packet mismatch status chanege in Bundle Interface. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40045 | NotificationswCesopBundleNextHopTrap | current | This trap is sent when Packet mismatch status chanege in Bundle Interface. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40046 | NotificationswCesopClockAdapLinkQualityTrap | current | This trap is sent when Adaptative link quality change in clock source interface. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40047 | NotificationswCesopClockSourceTrap | current | This trap is sent when Source clock status change. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40048 | NotificationswRemoteDeviceReady | current | This trap is sent when a remote device becomes ready to be managed. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40049 | NotificationswRemoteDeviceLost | current | This trap is sent when a remote device is no longer manageable. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40050 | NotificationswRemoteDeviceConfigFail | current | This trap is sent when the configuration sent to a remote device is rejected. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40051 | NotificationswRemoteDeviceConfigForced | current | This trap is sent when a remote device configuration is forced. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40052 | NotificationswFanFuseStatusChange | current | This trap is sent when the fan board fuse change its status. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40053 | NotificationswDyingGaspPackReceived | current | This trap is sent every time an OAM:Dying Gasp package is received on port | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40054 | NotificationswBroadcastStormCheckChange | current | This trap is sent when a broadcast storm threshold is hit or recovers. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40055 | NotificationswMulticastStormCheckChange | current | This trap is sent when a multicast storm threshold is hit or recovers. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40056 | NotificationswBpduProtectLimit | current | This trap is sent when a BPDU limit has reached. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40057 | NotificationswChangeStatusLDP | current | This trap is sent when occurs one change on status the protocol LDP. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40058 | NotificationswChangeStatusTunnelRSVP | current | This trap is sent when occurs one change on status the tunnels of protocol RSVP. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40059 | NotificationswBpduProtect | current | This trap is sent when a BPDU protect block time expired. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40060 | NotificationswRouteTableFull | current | This trap is sent when L3 Routing Table reaches its limits. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40061 | NotificationswPanelStatusTrap | current | This trap is sent when the Panel status change. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40062 | NotificationswLSTGroupLinkStatusDown | current | This trap is sent when a link-state tracking group is down | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40063 | NotificationswLSTGroupLinkStatusUp | current | This trap is sent when a link-state tracking group is up | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40064 | NotificationswHighCpuL3UsageDetected | current | This trap is sent when the CPU L3 utilization is greater than 90%. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40065 | NotificationswHighCpuL3UsageNoMoreDetected | current | This trap is sent when the CPU L3 utilization is lower than 90%. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40066 | NotificationswHighMemoryL3UsageDetected | current | This trap is sent when the L3 memory utilization is critical. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40067 | NotificationswHighMemoryL3UsageNoMoreDetected | current | This trap is sent when the L3 memory utilization is normal. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40068 | NotificationswMpuNsfIdDiffers | current | This trap is sent when the active and standby mpu nsf-id differs. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40069 | NotificationswErpsStatusChange | current | This trap is sent when the erps status change. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40070 | NotificationswCfmDefect | current | This trap is sent when some CFM MEP enters or leave an error state. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40071 | NotificationswLldpRemoteChange | current | This trap is sent when LLDP remote table changes. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40072 | NotificationswPoeOverCurrent | current | This trap is sent when a Power over Ethernet enabled port was shut down due an overcurrent. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40073 | NotificationswPoePowerRestriction | current | This trap is sent when an Power over Ethernet enabled port was shut down because the connected device announced an power consumption over the configured for th… | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40074 | NotificationswCoreDump | current | This trap is sent when an application terminate abnormally and generates a core dump. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40075 | NotificationswElmiEvcStatus | current | This trap is sent when an EVC changes its state. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40076 | NotificationswSyncSystemClockSwitchHier | current | This trap is sent when system changes active clock synchronize hierarchy | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40077 | NotificationswSyncSystemClockStatus | current | This trap is sent when system clock changes its status | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40078 | NotificationswHostTableFull | current | This trap is sent when L3 Host Table reaches its limits. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40079 | NotificationswSyncG704ClockStatus | current | This trap is sent when g704 clock source changes its status. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40080 | NotificationswSystemWarningsUnits | current | This trap is sent when warnings in the system units are found. | |
| 1.3.6.1.4.1.3709.3.5.201.2.1.0.40081 | NotificationswRebootDueToOvertemp | current | This trap is sent when the device reboots due to overheat. | |
| 1.3.6.1.4.1.3709.3.5.201.3 | NodedmSwitchConformance |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| KeySegment | DisplayString(SIZE(0..128)) | current | The total length of the key is 1024 characters, it is divided into 8 parts and stored in 8 separated mib variables as below: Key1: part 1 of the key (1-128) Key2: part 2 of the key (129-256) Key3: part 3 of the key (257… |
| StaPathCostMode | INTEGER { short(1), long(2) } | current | The path cost mode of a spanning tree algorithm, short(1) indicates that we retrieve/configure the spanning tree path cost as a 16 bit value and long(2) indicates that we retrieve/configure the spanning tree path cost a… |
| ValidStatus | INTEGER { valid(1), invalid(2) } | current | A simple status value for the object to create and destroy a table entry. This is a simplified variant of RowStatus as it supports only two values. Setting it to valid(1) creates an entry. Setting it to invalid(2) destr… |