DNOS-BGP-MIB
95 objects
The MIB definitions for Border Gateway Protocol Flex package.
Imported Objects
| DELL-REF-MIB | dnOS |
| RFC1213-MIB | DisplayString |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5 | IdentityfastPathBGP | The MIB definitions for Border Gateway Protocol Flex package. | ||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.1 | NodeagentBGPQueueGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.1.1 | TableagentBGPQueueTable | not-accessible | current | Table lists information about BGP work queue utilization. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.1.1.1 | RowagentBGPQueueEntry | not-accessible | current | Information on a specific BGP work queue. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.1.1.1.1 | ColumnagentBGPQueueIndex | not-accessible | current | Index value for this work queue. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.1.1.1.2 | ColumnagentBGPQueueName | read-only | current | Name of an BGP work queue. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.1.1.1.3 | ColumnagentBGPQueueLength | read-only | current | The number of items currently in the work queue. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.1.1.1.4 | ColumnagentBGPQueueHigh | read-only | current | The high water mark of the number of items in the work queue. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.1.1.1.5 | ColumnagentBGPQueueDrops | read-only | current | The number of items dropped because the work queue was full. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.1.1.1.6 | ColumnagentBGPQueueLimit | read-only | current | The maximum number of items this queue can hold. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.2 | NodeagentBGPMessageStatsGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.2.1 | ScalaragentBGPCountersCleared | read-only | current | The time since BGP counters were last cleared, in seconds. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.2.2 | ScalaragentBGPInOpens | read-only | current | The total number of BGP OPEN messages received since BGP counters were last cleared. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.2.3 | ScalaragentBGPOutOpens | read-only | current | The total number of BGP OPEN messages transmitted since BGP counters were last cleared. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.2.4 | ScalaragentBGPInUpdates | read-only | current | The total number of BGP UPDATE messages received since BGP counters were last cleared. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.2.5 | ScalaragentBGPOutUpdates | read-only | current | The total number of BGP UPDATE messages transmitted since BGP counters were last cleared. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.2.6 | ScalaragentBGPInNotifications | read-only | current | The total number of BGP NOTIFICATION messages received since BGP counters were last cleared. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.2.7 | ScalaragentBGPOutNotifications | read-only | current | The total number of BGP NOTIFICATION messages transmitted since BGP counters were last cleared. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.2.8 | ScalaragentBGPInKeepalives | read-only | current | The total number of BGP KEEPALIVE messages received since BGP counters were last cleared. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.2.9 | ScalaragentBGPOutKeepalives | read-only | current | The total number of BGP KEEPALIVE messages transmitted since BGP counters were last cleared. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.2.10 | ScalaragentBGPInRouteRefreshes | read-only | current | The total number of BGP ROUTE REFRESH messages received since BGP counters were last cleared. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.2.11 | ScalaragentBGPOutRouteRefreshes | read-only | current | The total number of BGP ROUTE REFRESH messages transmitted since BGP counters were last cleared. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.2.12 | ScalaragentBGPInUpdatesMax | read-only | current | The maximum rate of BGP UPDATE messages received. The rate is given in packets per second. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.2.13 | ScalaragentBGPOutUpdatesMax | read-only | current | The maximum rate of BGP UPDATE messages transmitted. The rate is given in packets per second. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.3 | TableagentBGPDecProcTable | not-accessible | current | This table contains information about the twenty most recent executions of any of the three decision process phases. The most recent information is at the end … |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.3.1 | RowagentBGPDecProcEntry | not-accessible | current | Information about execution of a single decision process phase. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.3.1.1 | ColumnagentBGPDecProcIndex | not-accessible | current | Integer that uniquely identifies a decision process run. This value is incremented each time BGP runs one phase of the decision process. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.3.1.2 | ColumnagentBGPDecProcDeltaT | read-only | current | How long since this decision process ran. The time is given in seconds. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.3.1.3 | ColumnagentBGPDecProcPhase | read-only | current | Which of the three decision process phases was run. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.3.1.4 | ColumnagentBGPDecProcUpdateGroup | read-only | current | This variable is only valid when agentBGPDecProcPhase is 3. When the phase is 3, this variable identifies the outbound update group for which phase 3 was run. … |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.3.1.5 | ColumnagentBGPDecProcGenId | read-only | current | The global generation ID when the decision process ran. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.3.1.6 | ColumnagentBGPDecProcReason | read-only | current | Reason why the decision process was run. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.3.1.7 | ColumnagentBGPDecProcPeer | read-only | current | This variable is only valid when phase 1 is run for a single peer. In this case, this variable is the IP address of the peer for which phase 1 was run. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.3.1.8 | ColumnagentBGPDecProcDuration | read-only | current | How long the decision process ran. Milliseconds. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.3.1.9 | ColumnagentBGPDecProcAdds | read-only | current | Number of prefixes added during the decision process. For phase 1, this is the number of prefixes that pass inbound policy. For phase 2, this is the number of … |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.3.1.10 | ColumnagentBGPDecProcMods | read-only | current | Number of prefixes modified during the decision process. For phase 1, this is the number of prefixes that pass inbound policy. For phase 2, this is the number … |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.3.1.11 | ColumnagentBGPDecProcDels | read-only | current | Number of prefixes deleted during the decision process. For phase 1, this is the number of prefixes that previously passed inbound policy but no longer pass. F… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.4 | TableagentBGPPeerTable | not-accessible | current | BGP peer table. This table contains, one entry per BGP peer, information about connections with BGP peers. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.4.1 | RowagentBGPPeerEntry | not-accessible | current | Entry containing information about the connection with a BGP peer. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.4.1.1 | ColumnagentBGPPeerRemoteAddr | read-only | current | The remote IP address of this entry's BGP peer. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.4.1.2 | ColumnagentBGPPeerInOpens | read-only | current | The number of BGP OPEN messages received from this peer. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.4.1.3 | ColumnagentBGPPeerOutOpens | read-only | current | The number of BGP OPEN messages transmitted to this peer. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.4.1.4 | ColumnagentBGPPeerInUpdates | read-only | current | The number of BGP UPDATE messages received from this peer. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.4.1.5 | ColumnagentBGPPeerOutUpdates | read-only | current | The number of BGP UPDATE messages transmitted to this peer. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.4.1.6 | ColumnagentBGPPeerInNotifications | read-only | current | The number of BGP NOTIFICATION messages received from this peer. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.4.1.7 | ColumnagentBGPPeerOutNotifications | read-only | current | The number of BGP NOTIFICATION messages transmitted to this peer. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.4.1.8 | ColumnagentBGPPeerInKeepalives | read-only | current | The number of BGP KEEPALIVE messages received from this peer. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.4.1.9 | ColumnagentBGPPeerOutKeepalives | read-only | current | The number of BGP KEEPALIVE messages transmitted to this peer. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.4.1.10 | ColumnagentBGPPeerInRouteRefreshes | read-only | current | The number of BGP ROUTE REFRESH messages received from this peer. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.4.1.11 | ColumnagentBGPPeerOutRouteRefreshes | read-only | current | The number of BGP ROUTE REFRESH messages transmitted to this peer. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.4.1.12 | ColumnagentBGPPeerInTotalMessages | read-only | current | The total number of BGP messages of all types received from this peer. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.4.1.13 | ColumnagentBGPPeerOutTotalMessages | read-only | current | The total number of BGP messages of all types transmitted to this peer. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.4.1.14 | ColumnagentBGPPeerUpdateQueueLen | read-only | current | After receiving a BGP UPDATE message, BGP places each UPDATE on a per-neighbor queue before processing the UPDATE. This variable gives the current length of th… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.4.1.15 | ColumnagentBGPPeerUpdateQueueHigh | read-only | current | The maximum length (or high water mark) of this peer.s UPDATE queue, in bytes. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.4.1.16 | ColumnagentBGPPeerUpdateQueueLimit | read-only | current | The maximum number of bytes of received UPDATE messages that may be queued for this peer at any given time. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.4.1.17 | ColumnagentBGPPeerUpdateQueueDrops | read-only | current | The number of UPDATE messages from this peer that could not be added to the UPDATE queue because the queue was full. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.4.1.18 | ColumnagentBGPPeerInPfxAdv | read-only | current | The number of IPv4 prefixes received from this peer. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.4.1.19 | ColumnagentBGPPeerOutPfxAdv | read-only | current | The number of IPv4 prefixes advertised to this peer. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.4.1.20 | ColumnagentBGPPeerInPfxWithdrawn | read-only | current | The number of IPv4 prefixes this peer has withdrawn. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.4.1.21 | ColumnagentBGPPeerOutPfxWithdrawn | read-only | current | The number of IPv4 prefixes this router has withdrawn in UPDATE messages to this peer. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.4.1.22 | ColumnagentBGPPeerInPfxCurrent | read-only | current | The number of IPv4 prefixes this peer is currently advertising to this router and that have passed inbound policy. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.4.1.23 | ColumnagentBGPPeerOutPfxCurrent | read-only | current | The number of IPv4 prefixes this router is currently advertising to this peer. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.4.1.24 | ColumnagentBGPPeerInPfxAccepted | read-only | current | The number of IPv4 prefixes received from this peer that may be considered to be included in the BGP route table. This includes all current prefixes whose path… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.4.1.25 | ColumnagentBGPPeerInPfxRejected | read-only | current | The number of IPv4 prefixes from this peer that did not pass inbound policy. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.4.1.26 | ColumnagentBGPPeerInMaxNlriPerUpdate | read-only | current | The maximum number of IPv4 prefixes in any single UPDATE message from this peer. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.4.1.27 | ColumnagentBGPPeerOutMaxNlriPerUpdate | read-only | current | The maximum number of IPv4 prefixes in any single UPDATE message sent to this peer. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.4.1.28 | ColumnagentBGPPeerInMinNlriPerUpdate | read-only | current | The minimum number of IPv4 prefixes in any single UPDATE message from this peer. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.4.1.29 | ColumnagentBGPPeerOutMinNlriPerUpdate | read-only | current | The minimum number of IPv4 prefixes in any single UPDATE message sent to this peer. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.4.1.30 | ColumnagentBGPPeerInPfxAdvIPv6 | read-only | current | The number of IPv6 prefixes received from this peer. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.4.1.31 | ColumnagentBGPPeerOutPfxAdvIPv6 | read-only | current | The number of IPv6 prefixes advertised to this peer. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.4.1.32 | ColumnagentBGPPeerInPfxWithdrawnIPv6 | read-only | current | The number of IPv6 prefixes this peer has withdrawn. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.4.1.33 | ColumnagentBGPPeerOutPfxWithdrawnIPv6 | read-only | current | The number of IPv6 prefixes this router has withdrawn in UPDATE messages to this peer. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.4.1.34 | ColumnagentBGPPeerInPfxCurrentIPv6 | read-only | current | The number of IPv6 prefixes this peer is currently advertising to this router and that have passed inbound policy. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.4.1.35 | ColumnagentBGPPeerOutPfxCurrentIPv6 | read-only | current | The number of IPv6 prefixes this router is currently advertising to this peer. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.4.1.36 | ColumnagentBGPPeerInPfxAcceptedIPv6 | read-only | current | The number of IPv6 prefixes received from this peer that may be considered to be included in the BGP route table. This includes all current prefixes whose path… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.4.1.37 | ColumnagentBGPPeerInPfxRejectedIPv6 | read-only | current | The number of IPv6 prefixes from this peer that did not pass inbound policy. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.4.1.38 | ColumnagentBGPPeerInMaxNlriPerUpdateIPv6 | read-only | current | The maximum number of IPv6 prefixes in any single UPDATE message from this peer. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.4.1.39 | ColumnagentBGPPeerOutMaxNlriPerUpdateIPv6 | read-only | current | The maximum number of IPv6 prefixes in any single UPDATE message sent to this peer. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.4.1.40 | ColumnagentBGPPeerInMinNlriPerUpdateIPv6 | read-only | current | The minimum number of IPv6 prefixes in any single UPDATE message from this peer. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.4.1.41 | ColumnagentBGPPeerOutMinNlriPerUpdateIPv6 | read-only | current | The minimum number of IPv6 prefixes in any single UPDATE message sent to this peer. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.5 | TableagentBGPDecProcIPv6Table | not-accessible | current | This table contains information about the twenty most recent executions of any of the three decision process phases. The most recent information is at the end … |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.5.1 | RowagentBGPDecProcIPv6Entry | not-accessible | current | Information about execution of a single decision process phase. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.5.1.1 | ColumnagentBGPDecProcIPv6Index | not-accessible | current | Integer that uniquely identifies a decision process run. This value is incremented each time BGP runs one phase of the decision process. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.5.1.2 | ColumnagentBGPDecProcDeltaTIPv6 | read-only | current | How long since this decision process ran. The time is given in seconds. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.5.1.3 | ColumnagentBGPDecProcPhaseIPv6 | read-only | current | Which of the three decision process phases was run. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.5.1.4 | ColumnagentBGPDecProcUpdateGroupIPv6 | read-only | current | This variable is only valid when agentBGPDecProcPhase is 3. When the phase is 3, this variable identifies the outbound update group for which phase 3 was run. … |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.5.1.5 | ColumnagentBGPDecProcGenIdIPv6 | read-only | current | The global generation ID when the decision process ran. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.5.1.6 | ColumnagentBGPDecProcReasonIPv6 | read-only | current | Reason why the decision process was run. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.5.1.7 | ColumnagentBGPDecProcPeerIPv6 | read-only | current | This variable is only valid when phase 1 is run for a single peer. In this case, this variable is the IP address of the peer for which phase 1 was run. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.5.1.8 | ColumnagentBGPDecProcDurationIPv6 | read-only | current | How long the decision process ran. Milliseconds. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.5.1.9 | ColumnagentBGPDecProcAddsIPv6 | read-only | current | Number of prefixes added during the decision process. For phase 1, this is the number of prefixes that pass inbound policy. For phase 2, this is the number of … |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.5.1.10 | ColumnagentBGPDecProcModsIPv6 | read-only | current | Number of prefixes modified during the decision process. For phase 1, this is the number of prefixes that pass inbound policy. For phase 2, this is the number … |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.5.1.11 | ColumnagentBGPDecProcDelsIPv6 | read-only | current | Number of prefixes deleted during the decision process. For phase 1, this is the number of prefixes that previously passed inbound policy but no longer pass. F… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.6 | NodeagentBGPSnmpTrapFlagsConfigGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.5.6.1 | ScalaragentBGPSnmpAllTrapFlag | read-write | current | Enable standard traps defined in RFC 4273. |