DNOS-MGMT-SECURITY-MIB
54 objects
The Dell Networking Private MIB for Security
Imported Objects
| DELL-REF-MIB | dnOS |
| RFC1213-MIB | DisplayString |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.11 | IdentityfastPathMgmtSecurity | The Dell Networking Private MIB for Security | ||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.11.1 | NodeagentSSLConfigGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.11.1.1 | ScalaragentSSLAdminMode | read-write | current | Configures whether the SSL service is enabled on this switch. The default value is disable(2). |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.11.1.2 | ScalaragentSSLSecurePort | read-write | current | Configures a layer 4 port number in the range 1025-65535 for secure HTTP connections. The default port is 443. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.11.1.3 | ScalaragentSSLProtocolLevel | read-only | current | Indicates which protocol versions of SSL are enabled on this switch. The default value is tls12(4). |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.11.1.4 | ScalaragentSSLMaxSessions | read-write | current | Configures the maximum number of allowable SSL sessions. The default value is 16. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.11.1.5 | ScalaragentSSLHardTimeout | read-write | current | Configures the hard timeout for SSL sessions in seconds. The default value is 30 minutes (1800 seconds). Configure the value equal to the value of agentHTTPHar… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.11.1.6 | ScalaragentSSLSoftTimeout | read-write | current | Configures the soft (activity) timeout for SSL sessions in seconds. The default value is 3 minutes (180 seconds). Configure the value equal to the value of age… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.11.1.7 | ScalaragentSSLCertificatePresent | read-only | current | Boolean value indicating whether SSL certificate files exist on the device. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.11.1.8 | ScalaragentSSLCertificateControl | read-write | current | Controls certificate generation and deletion. Always returns noop(1). |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.11.1.9 | ScalaragentSSLCertificateGenerationStatus | read-only | current | Indicates whether certificate files are currently being generated. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.11.1.10 | ScalaragentSSLIpHttpSecureCiphersuite | read-write | current | Specifies ciphersuites to be used for SSL tunnel. This object is being used for assigning specified Secure Ciphersuite list. Bit mask value is being used for c… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.11.1.11 | ScalaragentSSLCryptoDhParam | read-write | current | Configures the Diffie-Hellman to be used for SSL tunnel. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.11.2 | NodeagentSSHConfigGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.11.2.1 | ScalaragentSSHAdminMode | read-write | current | Configures whether the SSH service is enabled on this switch. The default value is disable(2). |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.11.2.2 | ScalaragentSSHProtocolLevel | read-only | current | Indicates the protocol version of SSH enabled on this switch. Starting with the use of OpenSSH version 7.5P1, SSH Protocol Version 1.0 is no longer supported. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.11.2.3 | ScalaragentSSHSessionsCount | read-only | current | Current number of active SSH sessions on this switch. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.11.2.4 | ScalaragentSSHMaxSessionsCount | read-write | current | Max number of SSH sessions permitted on this switch. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.11.2.5 | ScalaragentSSHSessionTimeout | read-write | current | SSH idle timeout value for this switch in seconds. The upper limit represents 65535 minutes and 59 seconds. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.11.2.6 | ScalaragentSSHKeysPresent | read-only | current | Indicates what key files are present on the device, if any. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.11.2.7 | ScalaragentSSHKeyGenerationStatus | read-only | current | Indicates what key files are currently being generated, if any. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.11.2.8 | ScalaragentSSHRSAKeyControl | read-write | current | Controls RSA key generation and deletion. A read of this object always returns noop(1). |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.11.2.9 | ScalaragentSSHDSAKeyControl | read-write | current | Controls DSA key generation and deletion. A read of this object always returns noop(1). |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.11.2.10 | ScalaragentSSHExecBannerState | read-write | current | Shows/Changes EXEC banner state on SSH session. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.11.2.11 | ScalaragentSSHLoginBannerState | read-write | current | Shows/Changes login banner state on SSH session. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.11.2.12 | ScalaragentSSHMotdBannerState | read-write | current | Shows/Changes MOTD banner state on SSH session. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.11.2.13 | ScalaragentSSHEcdsaKeyControl | read-write | current | Controls ECDSA key generation and deletion. A read of this object always returns noop(1). |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.11.2.14 | ScalaragentSSHEcdsaKeyLen | read-write | current | Get/Set ECDSA key length. Supported Key lengths are 256, 384 and 521 bits. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.11.2.15 | ScalaragentSSHDsaKeyLen | read-write | current | Get/Set DSA key length. Supported Key length is 1024 bits. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.11.2.16 | ScalaragentSSHRsaKeyLen | read-write | current | Get/Set RSA key length. Supported Key lengths are 1024, 2048 and 3072 bits. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.11.2.17 | ScalaragentSSHAuthenticationRetries | read-write | current | To configure the maximum authentication retries allowed per SSH connection. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.11.2.18 | NodeagentSSHEncryptionAlgorithmsConfigGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.11.2.18.1 | TableagentSSHServerEncryptionAlgorithmsTable | not-accessible | current | Specifies SSH encryption algorithms to be used. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.11.2.18.1.1 | RowagentSSHServerEncryptionAlgorithmsEntry | not-accessible | current | Config entry for SSH encryption algorithms. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.11.2.18.1.1.1 | ColumnagentSSHServerEncryptionIndex | not-accessible | current | The index of the SSH encryption configuration order. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.11.2.18.1.1.2 | ColumnagentSSHServerEncryptionAlgorithms | read-create | current | Specifies encryption algorithm to be used for SSH. Abbreviation used. - chacha20-poly1305(4) is used for chacha20-poly1305@openssh.com. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.11.2.18.2 | ScalaragentSSHServerEncryptionRefresh | read-write | current | When set to enable(1), configuration of agentSSHServerEncryptionAlgorithmsEntry will be configured and refresh ssh process. The value is write-only. Attempt to… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.11.2.19 | NodeagentSSHMacAlgorithmsConfigGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.11.2.19.1 | TableagentSSHServerMacAlgorithmsTable | not-accessible | current | Specifies SSH mac algorithms to be used. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.11.2.19.1.1 | RowagentSSHServerMacAlgorithmsEntry | not-accessible | current | Config entry for SSH mac algorithms. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.11.2.19.1.1.1 | ColumnagentSSHServerMacIndex | not-accessible | current | The index of the SSH mac algorithms configuration order. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.11.2.19.1.1.2 | ColumnagentSSHServerMacAlgorithms | read-create | current | Specifies MAC algorithm to be used for SSH. Abbreviation used. - hmac-sha1-etm(2) is used for hmac-sha1-etm@openssh.com - hmac-md5-etm(3) is used for hmac-md5-… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.11.2.19.2 | ScalaragentSSHServerMacRefresh | read-write | current | When set to enable(1), configuration of agentSSHServerMacAlgorithmsEntry will be configured and refresh ssh process. The value is write-only. Attempt to read w… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.11.2.20 | NodeagentSSHKexAlgorithmsConfigGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.11.2.20.1 | TableagentSSHServerKexAlgorithmsTable | not-accessible | current | Specifies SSH kex algorithms to be used. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.11.2.20.1.1 | RowagentSSHServerKexAlgorithmsEntry | not-accessible | current | Config entry for SSH kex algorithms. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.11.2.20.1.1.1 | ColumnagentSSHServerKexIndex | not-accessible | current | The index of the SSH kex algorithms configuration order. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.11.2.20.1.1.2 | ColumnagentSSHServerKexAlgorithms | read-create | current | Specifies KEX algorithm to be used for SSH. Abbreviation used. - curve25519-sha256-libssh(2) is used for curve25519-sha256@libssh.org |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.11.2.20.2 | ScalaragentSSHServerKexRefresh | read-write | current | When set to enable(1), configuration of agentSSHServerKexAlgorithmsEntry will be configured and refresh ssh process. The value is write-only. Attempt to read w… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.11.3 | NodeagentOutboundSSHGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.11.3.1 | ScalaragentOutboundSSHAdminMode | read-write | current | Admin-mode of the Outbound SSH. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.11.3.2 | ScalaragentOutboundSSHMaxSessions | read-write | current | The maximum no. of Outbound SSH sessions allowed. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.11.3.3 | ScalaragentOutboundSSHActiveSessions | read-only | current | Get the number of active outgoing SSH sessions. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.11.3.4 | ScalaragentOutboundSSHTimeout | read-write | current | The login inactivity timeout value for Outbound SSH. |