DNOS-NTP-MIB
31 objects
This MIB module defines a portion of the SNMP MIB under the Dell enterprise OID pertaining to NTP client configuration and statistical collection.
Imported Objects
| DELL-REF-MIB | dnOS |
| IF-MIB | InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddress InetAddressType InetPortNumber |
| RFC1213-MIB | DisplayString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Gauge32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.168 | IdentityagentNtpMIB | This MIB module defines a portion of the SNMP MIB under the Dell enterprise OID pertaining to NTP client configuration and statistical collection. | ||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.168.1 | NodeagentNtpObjects | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.168.1.1 | NodeagentNtpConfigGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.168.1.1.1 | ScalaragentNtpAuthenticationMode | read-write | current | The NTP authentication mode that this device supports. The value true(1) indicates that message authentication is supported for NTP communication. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.168.1.1.2 | ScalaragentNtpBroadcastDelay | read-write | current | The estimated round-trip delay in microseconds between an NTP agent operating in broadcast(3) mode, as specified by agentNtpMode and an NTP broadcast server. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.168.1.1.3 | ScalaragentNtpBroadcastClientMode | read-write | current | This command is used to enable/disable the broadcast client mode. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.168.1.1.4 | ScalaragentNtpSourceInterface | read-write | current | A source-interface selection on an Interface Index (like vlan based routing interface, port based routing interface, loopback interface, tunnel interface). A n… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.168.1.1.5 | ScalaragentNtpServicePortSrcInterface | read-write | current | To select Service Port as a source-interface. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.168.1.1.6 | ScalaragentNtpVrfName | read-write | current | A textual string containing the name of a VRF Instance. This specifies the VRF Instance used for the NTP servers. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.168.1.1.7 | TableagentNtpAuthKeyTable | not-accessible | current | A table containing configuration of Authentication Keys for NTP. Each authentication key entry is represented by single conceptual row in this table. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.168.1.1.7.1 | RowagentNtpAuthKeyEntry | not-accessible | current | Information for a particular NTP authentication key. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.168.1.1.7.1.1 | ColumnagentNtpAuthKeyIndex | not-accessible | current | This object uniquely identifies the entry in the table. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.168.1.1.7.1.2 | ColumnagentNtpAuthKeyNumber | read-create | current | Authentication key number. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.168.1.1.7.1.3 | ColumnagentNtpAuthKeyMessageAuthAlg | read-create | current | Message authentication algorithm used while using this key. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.168.1.1.7.1.4 | ColumnagentNtpAuthKeyEncryptionStatus | read-create | current | The NTP authentication key encryption status. The value true(1) indicates that key is already encrypted. Get of this object always returns true. Encryption sta… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.168.1.1.7.1.5 | ColumnagentNtpAuthKeyName | read-create | current | A textual string containing the key. Get of this object always returns the key in the encrypted format. Key name can set with agentNtpAuthKeyEncryptionStatus. … |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.168.1.1.7.1.6 | ColumnagentNtpAuthKeyTrustedStatus | read-write | current | The NTP authentication key trusted status. The value true(1) indicates that key is trusted. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.168.1.1.7.1.7 | ColumnagentNtpAuthKeyRowStatus | read-create | current | The row status of this conceptual row in the table. active - The authentication key is available for use in NTP operations. Other writable leaves in this table… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.168.1.1.8 | TableagentNtpServerTable | not-accessible | current | A table containing configuration and statistical information for NTP servers. Each server entry is represented by single conceptual row in this table. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.168.1.1.8.1 | RowagentNtpServerEntry | not-accessible | current | Information for a particular NTP server. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.168.1.1.8.1.1 | ColumnagentNtpServerIndex | not-accessible | current | This object uniquely identifies the entry in the table. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.168.1.1.8.1.2 | ColumnagentNtpServerAddressType | read-create | current | This object specifies how agentNtpServerAddr is encoded. Support for all possible enumerations defined by InetAddressType is NOT REQUIRED. Address type can be … |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.168.1.1.8.1.3 | ColumnagentNtpServerAddress | read-create | current | The encoded internet address of an NTP server. Unicast NTP requests will be sent to this address. If this address is a DNS hostname, then that hostname SHOULD … |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.168.1.1.8.1.4 | ColumnagentNtpServerVersion | read-write | current | The NTP version this server supports. This is the value that will be encoded in NTP polls when operating in unicast(1) administrative mode. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.168.1.1.8.1.5 | ColumnagentNtpServerAuthKeyNumber | read-write | current | NTP server authentication key number. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.168.1.1.8.1.6 | ColumnagentNtpServerMinPollInterval | read-write | current | The minimum number of seconds between successive NTP polls of the server in seconds as a power of two. This polling interval is used for NTP requests in unicas… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.168.1.1.8.1.7 | ColumnagentNtpServerMaxPollInterval | read-write | current | The maximum number of seconds between successive NTP polls of the server in seconds as a power of two. This polling interval is used for NTP requests in unicas… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.168.1.1.8.1.8 | ColumnagentNtpServerPreferStatus | read-write | current | The NTP server preference status. The value true(1) indicates that server is preferred. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.168.1.1.8.1.9 | ColumnagentNtpServerBurstStatus | read-write | current | The NTP server burst status. The value true(1) indicates that burst should be configured. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.168.1.1.8.1.10 | ColumnagentNtpServerIburstStatus | read-write | current | The NTP server iburst status. The value true(1) indicates that iburst should be configured. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.168.1.1.8.1.11 | ColumnagentNtpServerRowStatus | read-create | current | The row status of this conceptual row in the table. active - The server is available for use in NTP client operations. Other writable leaves in this table MAY … |