DNOS-SWITCHING-MIB
1158 objects
The Dell Networking Private MIB for Switching
Imported Objects
| DELL-REF-MIB | AgentPortMask dnOS |
| DNOS-LOGGING-MIB | AgentLogSeverity |
| IANAifType-MIB | IANAifType |
| IF-MIB | ifIndex InterfaceIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressType InetPortNumber |
| Q-BRIDGE-MIB | dot1qFdbId dot1qVlanIndex VlanId VlanIndex |
| RFC1213-MIB | DisplayString PhysAddress |
| SNMPv2-SMI | Counter32 Counter64 Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DateAndTime MacAddress RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1 | IdentityfastPathSwitching | The Dell Networking Private MIB for Switching | ||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.0 | NodefastPathSwitchingTraps | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.0.1 | NotificationmultipleUsersTrap | current | This trap is sent when more than one user is logged in with administrative access. Only applies to CLI interface. | |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.0.2 | NotificationbroadcastStormStartTrap | obsolete | This trap is sent when a broadcast storm is detected. | |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.0.3 | NotificationbroadcastStormEndTrap | obsolete | This trap is sent when a broadcast storm is no longer detected. | |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.0.4 | NotificationlinkFailureTrap | obsolete | ||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.0.5 | NotificationvlanRequestFailureTrap | obsolete | ||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.0.6 | NotificationvlanDeleteLastTrap | current | Trap is sent when attempting to delete the last configured VLAN or the Default VLAN. | |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.0.7 | NotificationvlanDefaultCfgFailureTrap | current | Trap is sent if there are failures in resetting VLAN configuration to defaults. | |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.0.8 | NotificationvlanRestoreFailureTrap | obsolete | ||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.0.9 | NotificationfanFailureTrap | obsolete | ||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.0.10 | NotificationstpInstanceNewRootTrap | current | Trap is sent when this machine is a new STP Root when there is more than one STP instance. | |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.0.11 | NotificationstpInstanceTopologyChangeTrap | current | Trap is sent when there is a STP topology change when there is more than one STP instance. | |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.0.12 | NotificationpowerSupplyStatusChangeTrap | obsolete | ||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.0.13 | NotificationfailedUserLoginTrap | current | Trap is sent when a user fails to authenticate via the CLI or Web interfaces. | |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.0.15 | NotificationuserLockoutTrap | current | Trap is sent when a user account is locked due to consecutive failed login attempts via the CLI or Web interfaces beyond the allowed limit. | |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.0.16 | NotificationdaiIntfErrorDisabledTrap | current | Trap is sent once an interface is error disabled by DAI when the incoming packet rate exceeded configured rate limit during a burst-interval. | |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.0.17 | NotificationstpInstanceLoopInconsistentStartTrap | current | Trap is sent when this port in this STP instance enters loop inconsistent state upon failure to receive a BPDU. | |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.0.18 | NotificationstpInstanceLoopInconsistentEndTrap | current | Trap is sent when this port in this STP instance exits loop inconsistent state upon reception of a BPDU. | |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.0.19 | NotificationdhcpSnoopingIntfErrorDisabledTrap | current | Trap is sent once an interface is error disabled by DHCP Snooping when the incoming packet rate exceeded configured rate limit during a burst-interval. | |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.0.20 | NotificationagentSwitchIpAddressConflictTrap | current | IP address conflict trap signifies the reception of an ARP from another host in the LAN that has conflicting IP address. | |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.0.22 | NotificationagentSwitchCpuRisingThresholdTrap | current | Trap is sent when the total CPU utilization exceeds CPU Rising utilization threshold over the configured Rising threshold interval. | |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.0.23 | NotificationagentSwitchCpuFallingThresholdTrap | current | Trap is sent when the total CPU utilization falls below CPU Falling utilization threshold over the configured falling threshold interval. | |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.0.24 | NotificationagentSwitchCpuFreeMemBelowThresholdTrap | current | Trap is sent when CPU Free Memory falls below the configured threshold. | |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.0.25 | NotificationagentSwitchCpuFreeMemAboveThresholdTrap | current | Trap is sent when CPU Free Memory rises to 10% above the configured threshold. | |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.0.26 | NotificationagentSwitchStormControlTrap | current | Trap is sent when storm control rate limit is reached. | |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.0.27 | NotificationagentSwitchMbufRisingThresholdTrap | current | Trap is sent when the Mbuf utilization exceeds rising utilization threshold. | |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.0.28 | NotificationagentSwitchMbufFallingThresholdTrap | current | Trap is sent when the Mbuf utilization falls below falling utilization threshold. | |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.0.29 | NotificationloginSessionStartStopTrap | current | Trap is sent when a CLI session starts or ends. | |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.0.30 | NotificationagentSwitchDDisableAutoRecoveryTrap | current | Trap is sent when interface (ifIndex) is auto recovered from agentPortDDisableReason reason. | |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.0.32 | NotificationloopProtectTrap | current | Trap is sent on detection of loop on an interface. | |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.0.33 | NotificationagentdhcpSnoopViolationTrap | current | Trap is sent when DHCP snoop violation occurs on an interface. | |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.0.34 | NotificationagentMacChangedNotificationTrap | current | This notification is generated when there is at least one MAC address added or removed and the time elapsed from the previous notification is greater than the … | |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1 | NodeagentInfoGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.1 | NodeagentInventoryGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.1.1 | ScalaragentInventorySysDescription | read-only | current | The switch's Inventory system description. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.1.2 | ScalaragentInventoryMachineType | read-only | current | Type of the Machine used in the Switch |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.1.3 | ScalaragentInventoryMachineModel | read-only | current | The switch's Machine Model. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.1.4 | ScalaragentInventorySerialNumber | read-only | current | Serial number of the switch. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.1.5 | ScalaragentInventoryFRUNumber | read-only | current | FRU Number of the switch |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.1.6 | ScalaragentInventoryMaintenanceLevel | read-only | current | The switch's Inventory Maintenance Level |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.1.7 | ScalaragentInventoryPartNumber | read-only | current | The switch's Inventory Part Number |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.1.8 | ScalaragentInventoryManufacturer | read-only | current | Name of the Manufacturer of this unit |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.1.9 | ScalaragentInventoryBurnedInMacAddress | read-only | current | Burned-In MAC Address |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.1.10 | ScalaragentInventoryOperatingSystem | read-only | current | Operating System running on this unit |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.1.11 | ScalaragentInventoryNetworkProcessingDevice | read-only | current | Network Processing Device for this unit |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.1.12 | ScalaragentInventoryAdditionalPackages | read-only | current | Lists additional functional packages available on this unit. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.1.13 | ScalaragentInventorySoftwareVersion | read-only | current | Lists the version of software loaded on this unit. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.2 | NodeagentTrapLogGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.2.1 | ScalaragentTrapLogTotal | read-only | current | The total number of traps sent since last reset. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.2.3 | ScalaragentTrapLogTotalSinceLastViewed | read-only | current | The number of traps sent since last viewed. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.2.4 | TableagentTrapLogTable | not-accessible | current | Agent Trap Log |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.2.4.1 | RowagentTrapLogEntry | not-accessible | current | Agent trap log entry |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.2.4.1.1 | ColumnagentTrapLogIndex | read-only | current | Unique index of trap entry |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.2.4.1.2 | ColumnagentTrapLogSystemTime | read-only | current | System uptime when trap was sent. This entry shows how long the system has been up when the trap occurred. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.2.4.1.3 | ColumnagentTrapLogTrap | read-only | current | Description of the trap sent. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.3 | TableagentSupportedMibTable | not-accessible | current | Supported MIB table |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.3.1 | RowagentSupportedMibEntry | not-accessible | current | Supported MIB entry |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.3.1.1 | ColumnagentSupportedMibIndex | read-only | current | Unique index of the Supported MIB entry |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.3.1.2 | ColumnagentSupportedMibName | read-only | current | The name of the MIB (RFC or IEEE) that is supported. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.3.1.3 | ColumnagentSupportedMibDescription | read-only | current | Description of the MIB (RFC or IEEE) that is supported. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4 | NodeagentSwitchCpuProcessGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.1 | ScalaragentSwitchCpuProcessMemFree | read-only | current | The total memory free for utilization in KBytes. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.2 | ScalaragentSwitchCpuProcessMemAvailable | read-only | current | The total memory available in KBytes. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.3 | ScalaragentSwitchCpuProcessRisingThreshold | read-write | current | The CPU Rising utilization threshold in percentage. A zero percent threshold indicates CPU Utilization Notification feature is disabled. A notification is trig… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.4 | ScalaragentSwitchCpuProcessRisingThresholdInterval | read-write | current | The CPU Rising threshold interval in seconds. The time interval is configured in multiples of 5 seconds. A zero Rising interval indicates CPU Utilization Notif… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.5 | ScalaragentSwitchCpuProcessFallingThreshold | read-write | current | The CPU Falling utilization threshold in percentage. Configuration of this object value is optional. Value '0' is not allowed for configuration, if the Rising … |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.6 | ScalaragentSwitchCpuProcessFallingThresholdInterval | read-write | current | The CPU Falling threshold interval in seconds. Configuration of this object value is optional. Value '0' is not allowed for configuration, if the Rising interv… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.7 | ScalaragentSwitchCpuProcessFreeMemoryThreshold | read-write | current | The CPU Free Memory threshold in kilobytes. A zero threshold value indicates the CPU Free Memory Notification feature is disabled. Notifications are triggered … |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.8 | TableagentSwitchCpuProcessTable | not-accessible | current | A table of Task and cpu utilization. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.8.1 | RowagentSwitchCpuProcessEntry | not-accessible | current | Represents entry for a Task Table. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.8.1.1 | ColumnagentSwitchCpuProcessIndex | not-accessible | current | Unique index of process table |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.8.1.2 | ColumnagentSwitchCpuProcessName | read-only | current | Name of the process |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.8.1.3 | ColumnagentSwitchCpuProcessPercentageUtilization | read-only | obsolete | CPU utilization per task in Percentage over a period of 5, 60, 300 seconds, and the Rising threshold period also in seconds, if configured. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.8.1.4 | ColumnagentSwitchCpuProcessPercentageUtilizationFive | read-only | current | CPU utilization per task in percentage over a period of 5 seconds. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.8.1.5 | ColumnagentSwitchCpuProcessPercentageUtilizationSixty | read-only | current | CPU utilization per task in percentage over a period of 60 seconds. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.8.1.6 | ColumnagentSwitchCpuProcessPercentageUtilizationThreeHundred | read-only | current | CPU utilization per task in percentage over a period of 300 seconds. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.8.1.7 | ColumnagentSwitchCpuProcessId | read-only | current | Process ID |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.9 | ScalaragentSwitchCpuProcessTotalUtilization | read-only | obsolete | Total CPU utilization over a period of 5, 60, 300 seconds, and the Rising threshold period also in seconds, if configured. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.10 | ScalaragentSwitchCpuProcessTotalUtilizationFive | read-only | current | Total CPU utilization over a period of 5 seconds. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.11 | ScalaragentSwitchCpuProcessTotalUtilizationSixty | read-only | current | Total CPU utilization over a period of 60 seconds. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.12 | ScalaragentSwitchCpuProcessTotalUtilizationThreeHundred | read-only | current | Total CPU utilization over a period of 300 seconds. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.6 | NodeagentSwitchCpuCosQDropGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.6.1 | TableagentSwitchCpuCosQDropTable | not-accessible | current | Table lists the number of packets dropped at each CoS queue for the CPU. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.6.1.1 | RowagentSwitchCpuCosQDropEntry | not-accessible | current | Packet drop statistics for a CPU CoS queue. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.6.1.1.1 | ColumnagentSwitchCpuCosQIndex | not-accessible | current | Unique index of a CPU CoS queue. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.6.1.1.2 | ColumnagentSwitchCpuCosQDrops | read-only | current | Number of packets dropped at this CPU CoS queue because the queue was full. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.7 | NodeagentSwitchMbufGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.7.1 | ScalaragentSwitchMbufsFree | read-only | current | Number of message buffers currently available. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.7.2 | TableagentSwitchMbufTable | not-accessible | current | Table lists information about message buffer allocation for packets arriving at the CPU. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.7.2.1 | RowagentSwitchMbufEntry | not-accessible | current | Information on a specific class of message buffers. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.7.2.1.1 | ColumnagentSwitchMbufPrio | not-accessible | current | Message buffer priority. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.7.2.1.2 | ColumnagentSwitchMbufClassName | read-only | current | Name of this class of message buffer. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.7.2.1.3 | ColumnagentSwitchMbufAllocAttempts | read-only | current | Number of times the system tried to allocate a message buffer allocation of this class. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.7.2.1.4 | ColumnagentSwitchMbufAllocFails | read-only | current | Number of message buffer allocation failures for this class of message buffer. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.7.2.1.5 | ColumnagentSwitchMbufUsed | read-only | current | Number of message buffer used for this class of message buffer. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.7.3 | ScalaragentSwitchMbufsTotal | read-only | current | Total number of message buffers in the system. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.7.4 | ScalaragentSwitchMbufsUsed | read-only | current | Number of message buffers currently in use. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.8 | NodeagentPortStatsRateGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.8.1 | TableagentPortStatsRateTable | not-accessible | current | |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.8.1.1 | RowagentPortStatsRateEntry | not-accessible | current | |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.8.1.1.1 | ColumnagentPortStatsRateBitsPerSecondRx | read-only | current | The number of bits per second received. This value is an exponentially weighted average and is affected by the configured agentPortLoadStatsInterval. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.8.1.1.2 | ColumnagentPortStatsRateBitsPerSecondTx | read-only | current | The number of bits per second transmitted. This value is an exponentially weighted average and is affected by the configured agentPortLoadStatsInterval. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.8.1.1.3 | ColumnagentPortStatsRatePacketsPerSecondRx | read-only | current | The number of packets per second received. This value is an exponentially weighted average and is affected by the configured agentPortLoadStatsInterval. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.8.1.1.4 | ColumnagentPortStatsRatePacketsPerSecondTx | read-only | current | The number of packets per second transmitted. This value is an exponentially weighted average and is affected by the configured agentPortLoadStatsInterval. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.8.1.1.5 | ColumnagentPortStatsRateOverflowBitsPerSecondRx | read-only | current | The counter in which stored the number of times the associated agentPortStatsRateBitsPerSecondRx counter has overflowed. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.8.1.1.6 | ColumnagentPortStatsRateOverflowBitsPerSecondTx | read-only | current | The counter in which stored the number of times the associated agentPortStatsRateBitsPerSecondTx counter has overflowed. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.8.1.1.7 | ColumnagentPortStatsRateOverflowPacketsPerSecondRx | read-only | current | The counter in which stored the number of times the associated agentPortStatsRatePacketsPerSecondRx counter has overflowed. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.8.1.1.8 | ColumnagentPortStatsRateOverflowPacketsPerSecondTx | read-only | current | The counter in which stored the number of times the associated agentPortStatsRatePacketsPerSecondTx counter has overflowed. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.8.1.1.9 | ColumnagentPortStatsRateHCBitsPerSecondRx | read-only | current | The number of bits per second received. This value is an exponentially weighted average and is affected by the configured agentPortLoadStatsInterval. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.8.1.1.10 | ColumnagentPortStatsRateHCBitsPerSecondTx | read-only | current | The number of bits per second transmitted. This value is an exponentially weighted average and is affected by the configured agentPortLoadStatsInterval. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.8.1.1.11 | ColumnagentPortStatsRateHCPacketsPerSecondRx | read-only | current | The number of packets per second received. This value is an exponentially weighted average and is affected by the configured agentPortLoadStatsInterval. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.8.1.1.12 | ColumnagentPortStatsRateHCPacketsPerSecondTx | read-only | current | The number of packets per second transmitted. This value is an exponentially weighted average and is affected by the configured agentPortLoadStatsInterval. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2 | NodeagentConfigGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1 | NodeagentCLIConfigGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.1 | TableagentLoginSessionTable | not-accessible | current | A table of the switch's login session |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.1.1 | RowagentLoginSessionEntry | not-accessible | current | Login Session Entry |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.1.1.1 | ColumnagentLoginSessionIndex | read-only | current | Agent Login Session Index of the switch |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.1.1.2 | ColumnagentLoginSessionUserName | read-only | current | Agent Login Session UserName of the switch |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.1.1.3 | ColumnagentLoginSessionIPAddress | read-only | obsolete | Agent Login Session IP Address of the switch |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.1.1.4 | ColumnagentLoginSessionConnectionType | read-only | current | Agent Login Session Connection Type of the switch |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.1.1.5 | ColumnagentLoginSessionIdleTime | read-only | current | Agent Login Session Idle Time of the switch |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.1.1.6 | ColumnagentLoginSessionSessionTime | read-only | current | Agent Login Session Time of the switch |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.1.1.7 | ColumnagentLoginSessionStatus | read-write | current | Status of the user. active(1) - This connection is active. destroy(6) - Set to this value to disconnect this user. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.1.1.8 | ColumnagentLoginSessionInetAddressType | read-only | current | Type of address agentLoginSessionInetAddress is returning. Can be either unknown(0), ipv4(1), or ipv6 (2). Will return unknown(0) in the case of a serial login. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.1.1.9 | ColumnagentLoginSessionInetAddress | read-only | current | Inet Address of the connecting the user is logging in with. Will return a zero-length string in the case of a serial login. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.2 | NodeagentTelnetConfigGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.2.1 | ScalaragentTelnetLoginTimeout | read-write | current | Telnet login timeout (seconds) Config telnet timeout will set the telnet session timeout value. A session is active as long as the session has not remained idl… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.2.2 | ScalaragentTelnetMaxSessions | read-write | current | Maximum number of Telnet Sessions Config telnet maxsessions is an integer value from 0 to 4 that specifies the maximum number of telnet sessions that can be es… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.2.3 | ScalaragentTelnetAllowNewMode | read-write | current | Allow new telnet sessions (enable or disable) Config telnet disable means that no new Telnet sessions are to be established. Any already established session re… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.2.4 | ScalaragentTelnetMgmtPortNum | read-write | current | Get/Set the port no which should be used to open telnet sessions on switch. Port No is an integer value from 1 to 65535 and the given port should not be in use… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.2.5 | ScalaragentTelnetExecBannerState | read-write | current | Shows/Changes EXEC banner state on Telnet session. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.2.6 | ScalaragentTelnetLoginBannerState | read-write | current | Shows/Changes login banner state on Telnet session. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.2.7 | ScalaragentTelnetMotdBannerState | read-write | current | Shows/Changes MOTD banner state on Telnet session. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.3 | NodeagentUserConfigGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.3.1 | ScalaragentUserConfigCreate | read-write | current | Create a new user. When set with a non-empty string, a new user with that name will be created. This object will only return an empty string. This string is li… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.3.2 | TableagentUserConfigTable | not-accessible | current | User Config Table |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.3.2.1 | RowagentUserConfigEntry | not-accessible | current | User Config Entry |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.3.2.1.1 | ColumnagentUserIndex | not-accessible | current | Agent User Config Index |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.3.2.1.2 | ColumnagentUserName | read-write | current | Agent User Name. This string is limited to alpha-numeric strings (including the '-' and '_' characters). |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.3.2.1.3 | ColumnagentUserPassword | read-write | current | Agent User Password This object will return an empty string even if a password is set. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.3.2.1.4 | ColumnagentUserAccessMode | read-write | obsolete | Agent User Access Mode. This object is deprecated in favor of agentUserAccessLevel. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.3.2.1.5 | ColumnagentUserStatus | read-write | current | Agent User Status. active(1) - This user account is active. destroy(6) - Set to this value to remove this user account. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.3.2.1.9 | ColumnagentUserLockoutStatus | read-only | current | Displays whether the user account is locked due to excessive failed login attempts. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.3.2.1.10 | ColumnagentUserPasswordExpireTime | read-only | current | Date and time when the user's password expires (past or present). Only valid when password aging is enabled. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.3.2.1.11 | ColumnagentUserAccessLevel | read-write | current | Agent User Access Level. Supported values are 0, 1 and 15. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.3.2.1.12 | ColumnagentUserPasswordEncryptType | read-write | current | User password encryption algorithm Type. md5(5) - MD5 aes(6) - AES - 128 md5Salt(7) - MD5 Salted Hash sha256(8) - SHA256 Salted Hash sha512(10) - SHA512 Salted… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.3.2.1.13 | ColumnagentUserPasswordEncrypted | read-write | current | Specifies whether the password is encrypted or not. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.3.2.1.14 | ColumnagentUserMfa | read-write | current | Specifies Multifactor authentication state [enable/disable]. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.3.2.1.15 | ColumnagentUserEmailId | read-write | current | Specifies EmailId. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.5 | NodeagentSerialGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.5.1 | ScalaragentSerialTimeout | read-write | current | agentSerialTimeout specifies the maximum connect time(in seconds) without console activity. A value of 0 indicates that a console can be connected indefinitely… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.5.2 | ScalaragentSerialBaudrate | read-write | current | agentSerialBaudrate specifies the current baud rate at which the serial port will try to connect. The available values are 1200, 2400, 4800, 9600, 19200, 38400… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.5.3 | ScalaragentSerialCharacterSize | read-only | current | agentSerialCharacterSize specifies the number of bits in a character. The number of bits is always 8. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.5.4 | ScalaragentSerialHWFlowControlMode | read-only | current | agentSerialHardwareFlowControl specifies whether hardware flow-control is enabled or disabled. Hardware Flow Control is always disabled. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.5.5 | ScalaragentSerialStopBits | read-only | current | agentSerialStopBits specifies the number of Stop bits per character. The number of Stop bits is always 1. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.5.6 | ScalaragentSerialParityType | read-only | current | agentSerialParityType specifies the Parity Method used on the Serial Port. The Parity Method is always None. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.5.7 | ScalaragentSerialExecBannerState | read-write | current | Shows/Changes EXEC banner state on console session. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.5.8 | ScalaragentSerialLoginBannerState | read-write | current | Shows/Changes login banner state on console session. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.5.9 | ScalaragentSerialMotdBannerState | read-write | current | Shows/Changes MOTD banner state on console session. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.6 | NodeagentPasswordManagementConfigGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.6.1 | ScalaragentPasswordManagementMinLength | read-write | current | Minimum length for user passwords All new local user passwords must be at least this many characters in length. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.6.2 | ScalaragentPasswordManagementHistory | read-write | current | The number of previous passwords to store for prevention of password reuse. This ensures that each user does not reuse passwords often. A value of 0 indicates … |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.6.3 | ScalaragentPasswordManagementAging | read-write | current | The maximum time that user passwords are valid, in days, from the time the password is set. Once a password expires, the user will be required to enter a new p… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.6.4 | ScalaragentPasswordManagementLockAttempts | read-write | current | The number of allowable failed local authentication attempts before the user's account is locked. A value of 0 indicates that user accounts will never be locke… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.6.5 | ScalaragentPasswordManagementPasswordStrengthCheck | read-write | current | Configures Password Strength Check feature. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.6.6 | ScalaragentPasswordManagementStrengthMinUpperCase | read-write | current | The number of minimum allowable uppercase letters in a password. Minimum of 0 means no restriction on that set of characters. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.6.7 | ScalaragentPasswordManagementStrengthMinLowerCase | read-write | current | The number of minimum allowable lowercase letters in a password. Minimum of 0 means no restriction on that set of characters. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.6.8 | ScalaragentPasswordManagementStrengthMinNumericNumbers | read-write | current | The number of minimum allowable numeric numbers in a password. Minimum of 0 means no restriction on that set of characters. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.6.9 | ScalaragentPasswordManagementStrengthMinSpecialCharacters | read-write | current | The number of minimum allowable special characters in a password. Minimum of 0 means no restriction on that set of characters. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.6.10 | ScalaragentPasswordManagementStrengthMaxConsecutiveCharacters | read-write | current | The number of maximum consecutive characters can be present in a password. Maximum of 0 means disabling the restriction. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.6.11 | ScalaragentPasswordManagementStrengthMaxRepeatedCharacters | read-write | current | The number of maximum repeated characters can be present in a password. Maximum of 0 means disabling the restriction. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.6.12 | ScalaragentPasswordManagementStrengthMinCharacterClasses | read-write | current | The number of minimum allowable character classes in a password. Minimum of 0 means no restriction on that set of characters. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.6.14 | ScalaragentPasswordMgmtLastPasswordSetResult | read-only | current | Retrieves the last password set Result. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.6.15 | TableagentPasswordManagementStrengthExcludeKeywordTable | not-accessible | current | Represents Password strength restricted keywords from the configurable password. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.6.15.1 | RowagentPasswordManagementStrengthExcludeKeywordEntry | not-accessible | current | Represents Password strength restricted keywords from the configurable password. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.6.15.1.1 | ColumnagentPasswordMgmtStrengthExcludeKeyword | read-only | current | Specifies the given keyword string restricted from the configurable password. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.6.15.1.2 | ColumnagentPasswordMgmtStrengthExcludeKeywordStatus | read-create | current | Create the Exclude Keyword Index and configure (Create or Destroy) the keyword to it. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.7 | NodeagentCLIBannerConfigGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.7.1 | ScalaragentCLIBannerExec | read-write | current | Exec banner message string. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.7.2 | ScalaragentCLIBannerLogin | read-write | current | Login banner message string. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.7.3 | ScalaragentCLIBannerMOTD | read-write | current | MOTD banner message string. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.8 | NodeagentIASUserConfigGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.8.1 | ScalaragentIASUserConfigCreate | read-write | current | Create a new user. When set with a non-empty string, a new user with that name will be created. This object will only return an empty string. This string is li… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.8.2 | TableagentIASUserConfigTable | not-accessible | current | A table for dot1x Client details and associated functionality. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.8.2.1 | RowagentIASUserConfigEntry | not-accessible | current | Represents entry for port config table. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.8.2.1.1 | ColumnagentIASUserIndex | not-accessible | current | IAS user config index. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.8.2.1.2 | ColumnagentIASUserName | read-write | current | IAS user name. This string is limited to alpha-numeric strings (including '-' and '_' characters). |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.8.2.1.3 | ColumnagentIASUserPassword | read-write | current | IAS user password. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.8.2.1.4 | ColumnagentIASUserStatus | read-write | current | IAS User Status. active(1) - This user account is active. destroy(6) - Set to this value to remove this user account. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.9 | NodeagentGlobalMultifactorAuthenticationConfigGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.9.1 | ScalaragentGlobalMultifactorAuthentication | read-write | current | Specifies global Multifactor Authentication state [enable/disable]. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2 | NodeagentLagConfigGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.1 | ScalaragentLagConfigCreate | not-accessible | current | Agent LAG Create. When this object is set with a non-empty string, a new LAG will be created if possible with the entered string as its name. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2 | TableagentLagSummaryConfigTable | not-accessible | current | A summary table of the switch's LAG config entries |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1 | RowagentLagSummaryConfigEntry | not-accessible | current | Switch's LAG config entry |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.1 | ColumnagentLagSummaryLagIndex | read-only | current | Agent LAG IfIndex. This value corresponds with the LAG interface in the ifTable. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.2 | ColumnagentLagSummaryName | read-write | current | Agent LAG Name. The associated name of the LAG used during creation. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.3 | ColumnagentLagSummaryFlushTimer | read-write | obsolete | Agent LAG FlushTimer. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.4 | ColumnagentLagSummaryLinkTrap | read-write | current | Agent LAG LinkTrap. Configures sending Link Up/Down traps when the LAG interface goes Up or Down. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.5 | ColumnagentLagSummaryAdminMode | read-write | current | Agent LAG AdminMode. Administratively enables or disables this LAG interface. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.6 | ColumnagentLagSummaryStpMode | read-write | current | Agent LAG StpMode Administratively enables or disables STP on this interface. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.7 | ColumnagentLagSummaryAddPort | read-write | current | Agent LAG AddPort. Set to a non 0 value to add a port to the LAG. Values correspond to ifIndex values in the ifTable. Note: agentPortType for the port to be ad… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.8 | ColumnagentLagSummaryDeletePort | read-write | current | Agent LAG DeletePort. Set to a non 0 value to remove a port from the LAG. Values correspond to ifIndex values in the ifTable. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.9 | ColumnagentLagSummaryStatus | read-write | current | Agent LAG Status. active(1) - This LAG is enabled. destroy(6) - Set to this value to remove the LAG. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.10 | ColumnagentLagSummaryType | read-only | current | Agent LAG Type. static(1) - This LAG is staticly maintained. dynamic(2) - This LAG is dynamicly maintained. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.11 | ColumnagentLagSummaryStaticCapability | read-write | current | Agent LAG Static Capability enable(1) - Static capability is enabled for this LAG interface disable(2) - Static capability is disabled for this LAG interface |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.12 | ColumnagentLagSummaryHashMode | read-write | current | Agent LAG Hash Mode. This configures the hashing-mode for trunk port computation. The following are the possible values for hashing-mode. 1 - Source MAC, VLAN,… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.13 | ColumnagentLagSummarySwitchportMode | read-write | current | |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.14 | ColumnagentLagSummaryMinimumActiveLinks | read-write | current | Agent LAG Threshold. This configures the threshold(i.e minimum number of active ports) value for trunk port . |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.15 | ColumnagentLagSummaryAccessVlanID | read-write | current | Describes and Configures the VLAN ID of access switch port. A value of 0 indicates that the switch port is not configured as access port. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.16 | ColumnagentLagSummaryNativeVlanID | read-write | current | Describes and Configures the VLAN ID of access switch port. Configures the Native VLAN ID of the port. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.17 | ColumnagentLagSummaryLocalPreferenceMode | read-write | current | Agent LAG Local Preference Mode. Enables or disables the LAG interface's Local Preference Mode. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.18 | ColumnagentVpcId | read-write | current | To configure the port-channel (LAG) as VPC. 0 - To unconfigure the VPC on the port-channel (or) port-channel is not configured as VPC. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.19 | ColumnagentLagSummaryPortCounter | read-only | current | LAG port flap counter. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.20 | ColumnagentLagSummaryRateLoadInterval | read-write | current | The length of time for which data is used to compute load statistics. The value is given in seconds, and must be a multiple of 30. The allowable range is 30 to… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.3 | TableagentLagDetailedConfigTable | not-accessible | current | A detailed table of the switch's LAG config entries |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.3.1 | RowagentLagDetailedConfigEntry | not-accessible | current | Switch's LAG config entry |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.3.1.1 | ColumnagentLagDetailedLagIndex | read-only | current | LAG index |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.3.1.2 | ColumnagentLagDetailedIfIndex | read-only | current | LAG port index |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.3.1.3 | ColumnagentLagDetailedPortSpeed | read-only | current | LAG port speed. See agentPortType for a description and list of valid values. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.3.1.4 | ColumnagentLagDetailedPortStatus | read-only | current | LAG port status. active(1) - Actively participating in the LAG. inactive(2) - Not participating in the LAG. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.3.1.5 | ColumnagentLagDetailedPortCounter | read-only | current | LAG port flap counter. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.4 | ScalaragentLagConfigStaticCapability | read-write | obsolete | Agent LAG Static Capability. Configures whether Static LAGs are supported on this device. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.5 | ScalaragentLagClearCounters | read-write | current | Clear LAG stats. Will always return 0 when read. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.3 | NodeagentNetworkConfigGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.3.1 | ScalaragentNetworkIPAddress | read-write | current | The switch's network ip address |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.3.2 | ScalaragentNetworkSubnetMask | read-write | current | The switch's network subnet mask |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.3.3 | ScalaragentNetworkDefaultGateway | read-write | current | The switch's network default gateway |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.3.4 | ScalaragentNetworkBurnedInMacAddress | read-only | current | The switch's network Burned-In MAC address |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.3.5 | ScalaragentNetworkLocalAdminMacAddress | read-write | current | The switch's network locally administered MAC address |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.3.6 | ScalaragentNetworkMacAddressType | read-only | current | The switch's network Mac Address Type |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.3.7 | ScalaragentNetworkConfigProtocol | read-write | current | The switch's network config protocol |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.3.8 | ScalaragentNetworkConfigProtocolDhcpRenew | read-write | current | The switch's network config protocol dhcp is renewed. Will always return 0 when read. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.3.9 | ScalaragentNetworkWebMode | read-write | obsolete | The switch's network config protocol on next bootup This object has been obsoleted by agentHTTPWebMode. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.3.10 | ScalaragentNetworkJavaMode | read-write | obsolete | Configures the use of the Java interface through the Web. This object has been obsoleted by agentHTTPJavaMode. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.3.11 | ScalaragentNetworkMgmtVlan | read-write | current | The VLAN ID through which the switch can be managed using the agentNetworkIPAddress |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.3.12 | ScalaragentNetworkIpv6AdminMode | read-write | current | The network port IPv6 administrative state |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.3.13 | ScalaragentNetworkIpv6Gateway | read-write | current | The network port IPv6 Gateway Address |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.3.14 | TableagentNetworkIpv6AddrTable | not-accessible | current | The list of IPv6 address prefixes for the network port. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.3.14.1 | RowagentNetworkIpv6AddrEntry | not-accessible | current | An interface entry containing objects of a particular IPv6 address prefix |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.3.14.1.1 | ColumnagentNetworkIpv6AddrPrefix | not-accessible | current | The service port IPv6 Address Prefix |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.3.14.1.2 | ColumnagentNetworkIpv6AddrPrefixLength | read-create | current | The service port IPv6 Address Prefix Length |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.3.14.1.3 | ColumnagentNetworkIpv6AddrEuiFlag | read-create | current | The service port IPv6 Eui Flag |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.3.14.1.4 | ColumnagentNetworkIpv6AddrStatus | read-create | current | |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.3.15 | ScalaragentNetworkIpv6AddressAutoConfig | read-write | current | The ipv6 address autoconfig allows the device to perform IPv6 stateless address auto-configuration to discover prefixes on the link and then to add the eui-64 … |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.3.16 | ScalaragentNetworkIpv6ConfigProtocol | read-write | current | The switch's network IPv6 config protocol |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.3.17 | ScalaragentNetworkDhcp6ClientDuid | read-only | current | The DHCPv6 Client unique DUID. This value cannot be modified |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.3.18 | NodeagentNetworkStatsGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.3.18.1 | ScalaragentNetworkDhcp6ADVERTISEMessagesReceived | read-only | current | The no. of DHCPv6 messages of type ADVERTISE that have been received by the DHCPv6 client on the network port. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.3.18.2 | ScalaragentNetworkDhcp6REPLYMessagesReceived | read-only | current | The no. of DHCPv6 messages of type REPLY that have been received by the DHCPv6 client on the network port. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.3.18.3 | ScalaragentNetworkDhcp6ADVERTISEMessagesDiscarded | read-only | current | The no. of DHCPv6 messages of type ADVERTISE that have been discarded by the DHCPv6 client on the network port. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.3.18.4 | ScalaragentNetworkDhcp6REPLYMessagesDiscarded | read-only | current | The no. of DHCPv6 messages of type REPLY that have been discarded by the DHCPv6 client on the network port. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.3.18.5 | ScalaragentNetworkDhcp6MalformedMessagesReceived | read-only | current | The no. of DHCPv6 messages received malformed by the DHCPv6 client on the network port. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.3.18.6 | ScalaragentNetworkDhcp6SOLICITMessagesSent | read-only | current | The no. of DHCPv6 messages of type SOLICIT that have been sent by the DHCPv6 client on the network port. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.3.18.7 | ScalaragentNetworkDhcp6REQUESTMessagesSent | read-only | current | The no. of DHCPv6 messages of type REQUEST that have been sent by the DHCPv6 client on the network port. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.3.18.8 | ScalaragentNetworkDhcp6RENEWMessagesSent | read-only | current | The no. of DHCPv6 messages of type RENEW that have been sent by the DHCPv6 client on the network port. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.3.18.9 | ScalaragentNetworkDhcp6REBINDMessagesSent | read-only | current | The no. of DHCPv6 messages of type REBIND that have been sent by the DHCPv6 client on the network port. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.3.18.10 | ScalaragentNetworkDhcp6RELEASEMessagesSent | read-only | current | The no. of DHCPv6 messages of type RELEASE that have been sent by the DHCPv6 client on the network port. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.3.18.11 | ScalaragentNetworkDhcp6StatsReset | read-write | current | Clear the DHCPv6 Client statistics on the network port. A value of reset(1) is used to reset the statistics. A read on this object will always return the value… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.4 | NodeagentServicePortConfigGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.4.1 | ScalaragentServicePortIPAddress | read-write | current | The switch's ServicePort ip address |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.4.2 | ScalaragentServicePortSubnetMask | read-write | current | The switch's ServicePort subnet mask |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.4.3 | ScalaragentServicePortDefaultGateway | read-write | current | The switch's ServicePort default gateway |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.4.4 | ScalaragentServicePortBurnedInMacAddress | read-only | current | The switch's ServicePort Burned-In MAC address |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.4.5 | ScalaragentServicePortConfigProtocol | read-write | current | The switch's ServicePort config protocol |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.4.6 | ScalaragentServicePortProtocolDhcpRenew | read-write | current | The switch's ServicePort protocol dhcp is renewed. Will always return 0 when read. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.4.7 | ScalaragentServicePortIpv6AdminMode | read-write | current | The service port IPv6 administrative state |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.4.8 | ScalaragentServicePortIpv6Gateway | read-write | current | The IPv6 Gateway Address configured on the Servie port. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.4.9 | TableagentServicePortIpv6AddrTable | not-accessible | current | The list of IPv6 address prefixes configured on the Service port. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.4.9.1 | RowagentServicePortIpv6AddrEntry | not-accessible | current | An interface entry containing objects of a particular IPv6 address prefix |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.4.9.1.1 | ColumnagentServicePortIpv6AddrPrefix | read-create | current | The IPv6 Address Prefix configured on the Servie port. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.4.9.1.2 | ColumnagentServicePortIpv6AddrPrefixLength | read-create | current | The IPv6 Address Prefix Length of the address configured on the Service port. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.4.9.1.3 | ColumnagentServicePortIpv6AddrEuiFlag | read-create | current | The service port IPv6 Eui Flag |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.4.9.1.4 | ColumnagentServicePortIpv6AddrStatus | read-create | current | |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.4.10 | ScalaragentServicePortIpv6AddressAutoConfig | read-write | current | The ipv6 address autoconfig allows the device to perform IPv6 stateless address auto-configuration to discover prefixes on the link and then to add the eui-64 … |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.4.11 | ScalaragentServicePortIpv6ConfigProtocol | read-write | current | The Service Port.s IPv6 protocol configured on the switch. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.4.12 | ScalaragentServicePortDhcp6ClientDuid | read-only | current | The DHCPv6 Client unique DUID. This value cannot be modified |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.4.13 | NodeagentServicePortStatsGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.4.13.1 | ScalaragentServicePortDhcp6ADVERTISEMessagesReceived | read-only | current | The no. of DHCPv6 messages of type ADVERTISE that have been received by the DHCPv6 client on the service port. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.4.13.2 | ScalaragentServicePortDhcp6REPLYMessagesReceived | read-only | current | The no. of DHCPv6 messages of type REPLY that have been received by the DHCPv6 client on the service port. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.4.13.3 | ScalaragentServicePortDhcp6ADVERTISEMessagesDiscarded | read-only | current | The no. of DHCPv6 messages of type ADVERTISE that have been discarded by the DHCPv6 client on the service port. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.4.13.4 | ScalaragentServicePortDhcp6REPLYMessagesDiscarded | read-only | current | The no. of DHCPv6 messages of type REPLY that have been discarded by the DHCPv6 client on the service port. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.4.13.5 | ScalaragentServicePortDhcp6MalformedMessagesReceived | read-only | current | The no. of DHCPv6 messages received malformed by the DHCPv6 client on the service port. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.4.13.6 | ScalaragentServicePortDhcp6SOLICITMessagesSent | read-only | current | The no. of DHCPv6 messages of type SOLICIT that have been sent by the DHCPv6 client on the service port. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.4.13.7 | ScalaragentServicePortDhcp6REQUESTMessagesSent | read-only | current | The no. of DHCPv6 messages of type REQUEST that have been sent by the DHCPv6 client on the service port. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.4.13.8 | ScalaragentServicePortDhcp6RENEWMessagesSent | read-only | current | The no. of DHCPv6 messages of type RENEW that have been sent by the DHCPv6 client on the service port. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.4.13.9 | ScalaragentServicePortDhcp6REBINDMessagesSent | read-only | current | The no. of DHCPv6 messages of type REBIND that have been sent by the DHCPv6 client on the service port. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.4.13.10 | ScalaragentServicePortDhcp6RELEASEMessagesSent | read-only | current | The no. of DHCPv6 messages of type RELEASE that have been sent by the DHCPv6 client on the service port. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.4.13.11 | ScalaragentServicePortDhcp6StatsReset | read-write | current | Clear the DHCPv6 Client statistics on the service port. A value of reset(1) is used to reset the statistics. A read on this object will always return the value… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.6 | NodeagentSnmpConfigGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.6.5 | NodeagentSnmpTrapFlagsConfigGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.6.5.1 | ScalaragentSnmpAuthenticationTrapFlag | read-write | current | Authentication Flag - Enable/Disable authentication Flag. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.6.5.2 | ScalaragentSnmpLinkUpDownTrapFlag | read-write | current | Link Up/Down Flag - Enable/Disable Link Up/Link Down traps for the entire switch. When set to Enable, the Link Up/Down traps will be sent only if the Link Trap… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.6.5.3 | ScalaragentSnmpMultipleUsersTrapFlag | read-write | current | Multiple Users Flag - Enable/Disable Multiple User traps. When the value is set to Enable, a Multiple User Trap is sent whenever someone logs in to the termina… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.6.5.4 | ScalaragentSnmpSpanningTreeTrapFlag | read-write | current | Spanning Tree Flag - This flag enables the sending of new root traps and topology change notification traps. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.6.5.5 | ScalaragentSnmpBroadcastStormTrapFlag | read-write | obsolete | Broadcast Storm Flag - This flag enables or disables the broadcast storm trap. You must also enable Broadcast Storm Recovery Mode (see the Switch Configuration… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.6.5.6 | ScalaragentSnmpCpuTresholdTrapFlag | read-write | current | Enables sending of a trap on the CPU occupancy exceeding the rising threshold. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.6.5.7 | ScalaragentSnmpBuffersTrapFlag | read-write | current | Enables sending of a trap on the internal message buffer count exceeding the rising threshold. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.7 | NodeagentSpanningTreeConfigGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.7.1 | ScalaragentSpanningTreeMode | read-write | obsolete | The switch's Spanning Tree Switch Status. This functionality is now handled by agentStpAdminMode |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.7.2 | ScalaragentBpduGuardMode | read-write | obsolete | The spanning tree BPDU Guard Mode. enable(1) - enables BPDU Guard Mode on the switch. disable(2) - disables BPDU Guard Mode on the switch. The default status i… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.7.3 | ScalaragentBPDUFilteringMode | read-write | obsolete | The spanning tree BPDU Filter Mode, it enables BPDU Filter on all edge ports. enable(1) - enables BPDU Filter Mode on the switch. disable(2) - disables BPDU Fi… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8 | NodeagentSwitchConfigGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.3 | ScalaragentSwitchFdbAddressAgingTimeout | read-write | current | The address aging timeout. Specifies aging time in seconds (10 - 1000000) before a dynamic MAC address is erased from the Filtering Database. The default value… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.4 | TableagentSwitchAddressAgingTimeoutTable | not-accessible | current | The switch's address aging timeout table |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.4.1 | RowagentSwitchAddressAgingTimeoutEntry | not-accessible | current | Aging information about a specific Filtering Database. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.4.1.1 | ColumnagentSwitchAddressAgingTimeout | read-write | deprecated | The FDB entry's address aging timeout (in seconds).value '0' to disable Aging Timeout feature. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.5 | TableagentSwitchStaticMacFilteringTable | not-accessible | current | The switch's static Mac filtering table |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.5.1 | RowagentSwitchStaticMacFilteringEntry | not-accessible | current | Per-port ingress/egress filter configuration based on VLAN Id and MAC address. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.5.1.1 | ColumnagentSwitchStaticMacFilteringVlanId | read-only | current | The Static MAC Filter Vlan Id |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.5.1.2 | ColumnagentSwitchStaticMacFilteringAddress | read-only | current | The Static MAC Filter MAC address |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.5.1.3 | ColumnagentSwitchStaticMacFilteringSourcePortMask | read-write | current | The Static MAC Filter source port mask. When setting this value, the system will ignore configuration for ports not between the first and last valid ports. Con… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.5.1.4 | ColumnagentSwitchStaticMacFilteringDestPortMask | read-write | current | The Static MAC Filter destination port mask. When setting this value, the system will ignore configuration for ports not between the first and last valid ports… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.5.1.5 | ColumnagentSwitchStaticMacFilteringStatus | read-create | current | The Static MAC Filter status. Supported values: active(1) - valid entry createAndGo(4) - used to create a new entry destroy(6) - removes the entry |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.6 | NodeagentSwitchSnoopingGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.6.1 | TableagentSwitchSnoopingCfgTable | not-accessible | current | A table of the IGMP/MLD Snooping Global configuration entries. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.6.1.1 | RowagentSwitchSnoopingCfgEntry | not-accessible | current | Represents entry for Snooping switch Configuration. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.6.1.1.1 | ColumnagentSwitchSnoopingProtocol | read-only | current | The protocol type of network protocol in use. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.6.1.1.2 | ColumnagentSwitchSnoopingAdminMode | read-write | current | This enables or disables Snooping on the system. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.6.1.1.3 | ColumnagentSwitchSnoopingPortMask | read-write | current | IGMP/MLD Snooping Port Mask. This allows configuration of IGMP/MLD Snooping on selected ports. IGMP Snooping cannot be enabled on an interface that has routing… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.6.1.1.4 | ColumnagentSwitchSnoopingMulticastControlFramesProcessed | read-only | current | Multicast Control Frames Processed by CPU. The number of multicast control frames that have been processed by the CPU. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.8 | NodeagentSwitchSnoopingVlanGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.8.1 | TableagentSwitchSnoopingVlanTable | not-accessible | current | A table of the IGMP/MLD Snooping Vlan configuration entries. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.8.1.1 | RowagentSwitchSnoopingVlanEntry | not-accessible | current | Represents entry for a IGMP/MLD Snooping Vlan. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.8.1.1.1 | ColumnagentSwitchSnoopingVlanAdminMode | read-write | current | This enables or disables IGMP/MLD Snooping on a selected Vlan interface. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.8.1.1.2 | ColumnagentSwitchSnoopingVlanGroupMembershipInterval | read-write | current | The amount of time in seconds that a switch will wait for a report from a particular group on the selected vlan before deleting the interface participating in … |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.8.1.1.3 | ColumnagentSwitchSnoopingVlanMaxResponseTime | read-write | current | The amount of time in seconds a switch will wait after sending a query on the selected vlan because it did not receive a report for a particular group in the i… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.8.1.1.4 | ColumnagentSwitchSnoopingVlanFastLeaveAdminMode | read-write | current | This enables or disables IGMP/MLD Snooping on the selected vlan. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.8.1.1.5 | ColumnagentSwitchSnoopingVlanMRPExpirationTime | read-write | current | The amount of time in seconds that a switch will wait for a query to be received on the selected interface participating in the vlan before the interface is re… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.8.1.1.6 | ColumnagentSwitchSnoopingVlanReportSuppMode | read-write | current | This enables or disables IGMP/MLD Snooping Report Suppression feature on the selected vlan. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.9 | NodeagentSwitchVlanStaticMrouterGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.9.1 | TableagentSwitchVlanStaticMrouterTable | not-accessible | current | A table of the IGMP/MLD Static Mrouter Configuration parameters. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.9.1.1 | RowagentSwitchVlanStaticMrouterEntry | not-accessible | current | Represents entry for a IGMP/MLD Static Mrouter. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.9.1.1.1 | ColumnagentSwitchVlanStaticMrouterAdminMode | read-write | current | This enables or disables IGMP/MLD Mrouter on a per-interface per-vlan basis. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.10 | NodeagentSwitchMFDBGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.10.1 | TableagentSwitchMFDBTable | not-accessible | current | The Multicast Forwarding Database table |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.10.1.1 | RowagentSwitchMFDBEntry | not-accessible | current | Contains Forwarding and Filtering information per Vlan Index, MAC Address, and Component User. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.10.1.1.1 | ColumnagentSwitchMFDBVlanId | read-only | current | Vlan Index for which this entry is associated with. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.10.1.1.2 | ColumnagentSwitchMFDBMacAddress | read-only | current | A multicast MAC address for which the switch has forwarding and or filtering information. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.10.1.1.3 | ColumnagentSwitchMFDBProtocolType | read-only | current | The component that is responsible for this entry in the Multicast Forwarding Database. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.10.1.1.4 | ColumnagentSwitchMFDBType | read-only | current | This displays the type of the entry. static(1) - Entries configured by the end user dynamic(2) - Entries added as a result of a learning process or protocol |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.10.1.1.5 | ColumnagentSwitchMFDBDescription | read-only | current | Text description of this multicast table entry. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.10.1.1.6 | ColumnagentSwitchMFDBForwardingPortMask | read-only | current | BitMask indicating which ports this entry indicates should be forwarded. To obtain port numbers from interface numbers, use the objects agentPortDot1dBasePort … |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.10.1.1.7 | ColumnagentSwitchMFDBFilteringPortMask | read-only | current | BitMask indicating which ports this entry indicates should be filtered. To obtain port numbers from interface numbers, use the objects agentPortDot1dBasePort a… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.10.2 | TableagentSwitchMFDBSummaryTable | not-accessible | current | The Multicast Forwarding Database Summary table |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.10.2.1 | RowagentSwitchMFDBSummaryEntry | not-accessible | current | Summarizes the forwarding ports for all components registered for all MFDB table entries with the same Vlan Index and MAC Address. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.10.2.1.1 | ColumnagentSwitchMFDBSummaryVlanId | read-only | current | Vlan Index for which this entry is associated with. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.10.2.1.2 | ColumnagentSwitchMFDBSummaryMacAddress | read-only | current | A multicast MAC address for which the switch has forwarding and or filtering information. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.10.2.1.3 | ColumnagentSwitchMFDBSummaryForwardingPortMask | read-only | current | Port Mask indicating which ports this entry indicates should be forwarded. To obtain port numbers from interface numbers, use the objects agentPortDot1dBasePor… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.10.3 | ScalaragentSwitchMFDBMaxTableEntries | read-only | current | This displays the maximum number of entries that can possibly be in the Multicast Forwarding Database table. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.10.4 | ScalaragentSwitchMFDBMostEntriesUsed | read-only | current | This displays the largest number of entries that have been present in the Multicast Forwarding Database table. This value is also known as the MFDB high-water … |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.10.5 | ScalaragentSwitchMFDBCurrentEntries | read-only | current | This displays the current number of entries in the Multicast Forwarding Database table. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.11 | NodeagentSwitchDVlanTagGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.11.1 | ScalaragentSwitchDVlanTagEthertype | read-write | current | Configures the Double Vlan Tag Ethertype for the switch. If this object is supported, ethertype cannot be configured per port. Commonly used are the Ethertypes… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.11.2 | TableagentSwitchDVlanTagTable | not-accessible | current | A table of entries specifying the ethertype (TPID) values. This will let the user specify multiple ethertypes globally. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.11.2.1 | RowagentSwitchDVlanTagEntry | not-accessible | current | A table entry specifying the ethertype (TPID) values. Commonly used are the Ethertypes for vman tags (34984, or 0x88A8) and dot1q tags (33024, or 0x8100). |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.11.2.1.1 | ColumnagentSwitchDVlanTagTPid | not-accessible | current | Ethertype value to identify incoming double tagged frames |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.11.2.1.2 | ColumnagentSwitchDVlanTagPrimaryTPid | read-create | current | Specifies if this TPID is primary TPID for the switch or not |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.11.2.1.3 | ColumnagentSwitchDVlanTagRowStatus | read-create | current | Row status |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.11.3 | TableagentSwitchPortDVlanTagTable | not-accessible | current | A table entries specifying the ethertype (TPID) values per port. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.11.3.1 | RowagentSwitchPortDVlanTagEntry | not-accessible | current | A table entry specifying the ethertype (TPID) value for a port. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.11.3.1.1 | ColumnagentSwitchPortDVlanTagInterfaceIfIndex | not-accessible | current | Port Id on to which the Ethertype value is mapped |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.11.3.1.2 | ColumnagentSwitchPortDVlanTagTPid | not-accessible | current | Ethertype value to identify incoming double tagged frames |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.11.3.1.3 | ColumnagentSwitchPortDVlanTagMode | read-create | current | Controls the Double Vlan Tag mode on this port. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.11.3.1.4 | ColumnagentSwitchPortDVlanTagCustomerId | read-create | current | Configures the Customer ID for the Double Vlan Tag for this port. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.11.3.1.5 | ColumnagentSwitchPortDVlanTagRowStatus | read-create | current | Row status |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.12 | NodeagentSwitchStormControlGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.12.1 | ScalaragentSwitchDot3FlowControlMode | read-write | current | Config switchconfig flowcontrol allows you to enable or disable 802.3x flow control for the switch. This value applies to only full-duplex mode ports. Enabling… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.12.4 | ScalaragentSwitchBroadcastControlMode | read-write | current | The switch config broadcast allows you to enable or disable broadcast storm recovery mode. When you specify Enable for Broadcast Storm Recovery and the broadca… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.12.5 | ScalaragentSwitchBroadcastControlThreshold | read-write | current | Configures the broadcast storm recovery threshold for this port as a percentage of port speed. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.12.6 | ScalaragentSwitchMulticastControlMode | read-write | current | The switch config multicast allows you to enable or disable multicast storm recovery mode. When you specify Enable for multicast Storm Recovery and the multica… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.12.7 | ScalaragentSwitchMulticastControlThreshold | read-write | current | Configures the multicast storm recovery threshold for this port as a percentage of port speed. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.12.8 | ScalaragentSwitchUnicastControlMode | read-write | current | The switch config unicast allows you to enable or disable unicast storm recovery mode. When you specify Enable for unicast Storm Recovery and the unknown unica… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.12.9 | ScalaragentSwitchUnicastControlThreshold | read-write | current | Configures the unicast storm recovery threshold for this port as a percentage of port speed. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.12.10 | ScalaragentSwitchBroadcastControlThresholdUnit | read-write | current | Configures the units of the threshold value to percentage of port speed or absolute packets per second. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.12.11 | ScalaragentSwitchMulticastControlThresholdUnit | read-write | current | Configures the units of the threshold value to percentage of port speed or absolute packets per second. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.12.12 | ScalaragentSwitchUnicastControlThresholdUnit | read-write | current | Configures the units of the threshold value to percentage of port speed or absolute packets per second. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.12.13 | ScalaragentSwitchStormControlType | accessible-for-notify | current | Type of storm control. broadcast(1) - Broadcast storm control traffic. multicast(2) - Multicast storm control traffic. broadcast(3) - Unicast traffic resulted … |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.12.14 | ScalaragentSwitchStormControlAction | accessible-for-notify | current | Action to be taken when storm control rate limit is reached. shutdown(1) - Diag disable the interface on storm control. trap(2) - Generate trap on storm contro… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.12.15 | ScalaragentSwitchBroadcastStormControlAction | read-write | current | Configures the action to be taken when broadcast storm control rate limit is reached. none(0) - No action is taken. shutdown(1) - Diag disable the interface on… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.12.16 | ScalaragentSwitchMulticastStormControlAction | read-write | current | Configures the action to be taken when multicast storm control rate limit is reached. none(0) - No action is taken. shutdown(1) - Diag disable the interface on… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.12.17 | ScalaragentSwitchUnicastStormControlAction | read-write | current | Configures the action to be taken when unicast storm control rate limit is reached. none(0) - No action is taken. shutdown(1) - Diag disable the interface on s… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.17 | NodeagentSwitchVlanMacAssociationGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.17.1 | TableagentSwitchVlanMacAssociationTable | not-accessible | current | The switch's MAC To VLAN association table |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.17.1.1 | RowagentSwitchVlanMacAssociationEntry | not-accessible | current | VLAN to be assigned to untagged or priority tagged packets based on MAC address. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.17.1.1.1 | ColumnagentSwitchVlanMacAssociationMacAddress | not-accessible | current | The Mac address |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.17.1.1.2 | ColumnagentSwitchVlanMacAssociationVlanId | not-accessible | current | The VLAN the Mac address assigned to |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.17.1.1.3 | ColumnagentSwitchVlanMacAssociationRowStatus | read-create | current | The Mac to VLAN association row status. Supported values: active(1) - valid entry createAndGo(4) - used to create a new entry destroy(6) - removes the entry |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.18 | NodeagentSwitchProtectedPortConfigGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.18.1 | TableagentSwitchProtectedPortTable | not-accessible | current | The switch's protected port mapping table |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.18.1.1 | RowagentSwitchProtectedPortEntry | not-accessible | current | Protected ports assigned to groups. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.18.1.1.1 | ColumnagentSwitchProtectedPortGroupId | not-accessible | current | The group that this port belongs to |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.18.1.1.2 | ColumnagentSwitchProtectedPortGroupName | read-write | current | The name of the group |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.18.1.1.3 | ColumnagentSwitchProtectedPortPortList | read-write | current | The set of ports that are protected in this group |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.19 | NodeagentSwitchVlanSubnetAssociationGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.19.1 | TableagentSwitchVlanSubnetAssociationTable | not-accessible | current | The switch's Subnet To VLAN association table |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.19.1.1 | RowagentSwitchVlanSubnetAssociationEntry | not-accessible | current | VLAN to be assigned to untagged or priority tagged packets based on IP address and Subnet Mask. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.19.1.1.1 | ColumnagentSwitchVlanSubnetAssociationIPAddress | not-accessible | current | The ip address |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.19.1.1.2 | ColumnagentSwitchVlanSubnetAssociationSubnetMask | not-accessible | current | The subnet mask |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.19.1.1.3 | ColumnagentSwitchVlanSubnetAssociationVlanId | not-accessible | current | The VLAN that the IP address and subnet mask assigned to |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.19.1.1.4 | ColumnagentSwitchVlanSubnetAssociationRowStatus | read-create | current | The Subnet to VLAN association row status. Supported values: active(1) - valid entry createAndGo(4) - used to create a new entry destroy(6) - removes the entry |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.20 | NodeagentSwitchSnoopingQuerierGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.20.1 | TableagentSwitchSnoopingQuerierCfgTable | not-accessible | current | A table of the IGMP/MLD Snooping Querier Global configuration entries. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.20.1.1 | RowagentSwitchSnoopingQuerierCfgEntry | not-accessible | current | Represents entry for Snooping Querier Configuration. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.20.1.1.1 | ColumnagentSwitchSnoopingQuerierAdminMode | read-write | current | This enables or disables Snooping Querier on the system. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.20.1.1.2 | ColumnagentSwitchSnoopingQuerierVersion | read-write | current | This specifies the multicast protocol versions that are supported by the system. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.20.1.1.3 | ColumnagentSwitchSnoopingQuerierAddress | read-write | current | This specifies the default source ip address to be used while generating general queries. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.20.1.1.4 | ColumnagentSwitchSnoopingQuerierQueryInterval | read-write | current | This specified the timer interval after which the system generates general queries. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.20.1.1.5 | ColumnagentSwitchSnoopingQuerierExpiryInterval | read-write | current | This specified the timer interval after which the detected other querier information is no longer valid. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.20.2 | TableagentSwitchSnoopingQuerierVlanTable | not-accessible | current | A table of the Snooping Querier Vlan configuration entries. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.20.2.1 | RowagentSwitchSnoopingQuerierVlanEntry | not-accessible | current | Represents entry for a Snooping Querier configurable Vlan. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.20.2.1.1 | ColumnagentSwitchSnoopingQuerierVlanAdminMode | read-write | current | This enables or disables Snooping Querier on a selected Vlan interface. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.20.2.1.2 | ColumnagentSwitchSnoopingQuerierVlanOperMode | read-only | current | This specifies the current state of the Snooping Querier on a selected vlan interface |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.20.2.1.3 | ColumnagentSwitchSnoopingQuerierElectionParticipateMode | read-write | current | This enables or disables the Snooping Querier Election Participation mode. When enabled snooping querier switch will participate in querier election up on disc… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.20.2.1.4 | ColumnagentSwitchSnoopingQuerierVlanAddress | read-write | current | This specifies the default source ip address to be used while generating general queries on the specified vlan. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.20.2.1.5 | ColumnagentSwitchSnoopingQuerierOperVersion | read-only | current | This specifies the multicast protocol version that is currently being used by the snooping switch for the specified vlan while generating query messages. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.20.2.1.6 | ColumnagentSwitchSnoopingQuerierOperMaxResponseTime | read-only | current | The amount of time in seconds a switch will wait after sending a query on the selected vlan because it did not receive a report for a particular group in the i… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.20.2.1.7 | ColumnagentSwitchSnoopingQuerierLastQuerierAddress | read-only | current | This specifies the last querier's ip address for the specified vlan. It represents the detected other multicast querier in the vlan. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.20.2.1.8 | ColumnagentSwitchSnoopingQuerierLastQuerierVersion | read-only | current | This specifies the multicast protocol version that is currently being used by the detected other multicast querier for the specified vlan. (-1) - indicates tha… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.21 | NodeagentSwitchVoiceVLANGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.21.1 | ScalaragentSwitchVoiceVLANAdminMode | read-write | current | This enables or disables Voice VLAN on the system. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.21.2 | TableagentSwitchVoiceVlanDeviceTable | not-accessible | current | A table of the Voice Vlan device entries. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.21.2.1 | RowagentSwitchVoiceVlanDeviceEntry | not-accessible | current | Represents entry for a Voice Device on the interface. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.21.2.1.1 | ColumnagentSwitchVoiceVlanInterfaceNum | read-only | current | The interface number of this interface. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.21.2.1.2 | ColumnagentSwitchVoiceVlanDeviceMacAddress | read-only | current | The Voice Device Mac address |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22 | NodeagentDaiConfigGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.1 | ScalaragentDaiSrcMacValidate | read-write | current | This object indicates whether Sender MAC validation in the ARP packets is enabled. If this object is set to 'true', validation is enabled. If this object is se… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.2 | ScalaragentDaiDstMacValidate | read-write | current | This object indicates whether Target MAC validation in the ARP Response packets is enabled. If this object is set to 'true', validation is enabled. If this obj… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.3 | ScalaragentDaiIPValidate | read-write | current | This object indicates whether IP address validation in the ARP packets is enabled. If this object is set to 'true', validation is enabled. If this object is se… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.4 | TableagentDaiVlanConfigTable | not-accessible | current | A table provides the mechanism to control Dynamic ARP Inspection per VLAN. When a VLAN is created in a device supporting this table, a corresponding entry of t… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.4.1 | RowagentDaiVlanConfigEntry | not-accessible | current | A row instance contains the configuration for Dynamic ARP Inspection at each existing VLAN. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.4.1.1 | ColumnagentDaiVlanIndex | not-accessible | current | This object indicates the VLAN number on which Dynamic ARP Inspection feature is configured. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.4.1.2 | ColumnagentDaiVlanDynArpInspEnable | read-write | current | This object indicates whether Dynamic ARP Inspection is enabled in this VLAN. If this object is set to 'true', Dynamic ARP Inspection is enabled. If this objec… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.4.1.3 | ColumnagentDaiVlanLoggingEnable | read-write | current | This object indicates whether the Dynamic ARP Inspection logging is enabled on this VlAN. If this object is set to 'true', Dynamic ARP Inspection logging is en… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.4.1.4 | ColumnagentDaiVlanArpAclName | read-write | current | This object indicates the ARP ACL name set for this VLAN. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.4.1.5 | ColumnagentDaiVlanArpAclStaticFlag | read-write | current | This object indicates whether the ARP ACL set for this VLAN has static flag set. If this object is set to 'true', static flag is enabled. If this object is set… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.5 | ScalaragentDaiStatsReset | read-write | current | Clear the DAI statistics on all vlans. A value of reset(1) is used to reset the statistics. A read on this object will always return the value none(0). The val… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.6 | TableagentDaiVlanStatsTable | not-accessible | current | A table containing Dynamic ARP Inspection statistics per VLAN. When a VLAN is created in a device supporting this table, and Dynamic ARP Inspection is enabled … |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.6.1 | RowagentDaiVlanStatsEntry | not-accessible | current | A row instance contains the Dynamic ARP Inspection statistics per VLAN. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.6.1.1 | ColumnagentDaiVlanStatsIndex | not-accessible | current | This object indicates the VLAN number on which Dynamic ARP Inspection statistics are retrieved. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.6.1.2 | ColumnagentDaiVlanPktsForwarded | read-only | current | Number of valid ARP packets forwarded by DAI. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.6.1.3 | ColumnagentDaiVlanPktsDropped | read-only | current | Number of invalid ARP packets dropped by DAI. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.6.1.4 | ColumnagentDaiVlanDhcpDrops | read-only | current | Number of ARP packets that were dropped by DAI as there is no matching DHCP Snooping binding entry found. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.6.1.5 | ColumnagentDaiVlanDhcpPermits | read-only | current | Number of ARP packets that were forwarded by DAI as there is a matching DHCP Snooping binding entry found. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.6.1.6 | ColumnagentDaiVlanAclDrops | read-only | current | Number of ARP packets that were dropped by DAI as there is no matching ARP ACL rule found for this Vlan and the static flag is set on this vlan. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.6.1.7 | ColumnagentDaiVlanAclPermits | read-only | current | Number of ARP packets that were permitted by DAI as there is a matching ARP ACL permit rule found for this Vlan. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.6.1.8 | ColumnagentDaiVlanSrcMacFailures | read-only | current | Number of ARP packets that were dropped by DAI as the sender mac address in ARP packet didn't match the source mac in ethernet header. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.6.1.9 | ColumnagentDaiVlanDstMacFailures | read-only | current | Number of ARP packets that were dropped by DAI as the target mac address in ARP reply packet didn't match the destination mac in ethernet header. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.6.1.10 | ColumnagentDaiVlanIpValidFailures | read-only | current | Number of ARP packets that were dropped by DAI as the sender IP address in ARP packet or target IP address in ARP reply packet is invalid. Invalid addresses in… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.6.1.11 | ColumnagentDaiVlanAclDenials | read-only | current | Number of ARP packets that were dropped by DAI as there is a matching ARP ACL deny rule found for this Vlan. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.7 | TableagentDaiIfConfigTable | not-accessible | current | A table provides the mechanism to configure the trust state for Dynamic ARP Inspection purpose at each physical interface capable of this feature. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.7.1 | RowagentDaiIfConfigEntry | not-accessible | current | A row instance contains the configuration for Dynamic ARP Inspection at each physical interface capable of this feature. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.7.1.1 | ColumnagentDaiIfTrustEnable | read-write | current | This object indicates whether the interface is trusted for Dynamic ARP Inspection purpose. If this object is set to 'true', the interface is trusted. ARP packe… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.7.1.2 | ColumnagentDaiIfRateLimit | read-write | current | This object indicates rate limit value for Dynamic ARP Inspection purpose. If the incoming rate of ARP packets exceeds the value of this object for consecutive… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.7.1.3 | ColumnagentDaiIfBurstInterval | read-write | current | This object indicates the burst interval value for rate limiting purpose on this interface. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.8 | ScalaragentDaiInterfaceValidate | read-write | current | This object indicates whether Dynamic ARP Inspection checks for source interface match in the DHCP snooping binding database. If this object is set to 'true', … |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.23 | NodeagentArpAclGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.23.1 | TableagentArpAclTable | not-accessible | current | A table of the ARP ACL entries |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.23.1.1 | RowagentArpAclEntry | not-accessible | current | Represents entry for an ARP ACL |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.23.1.1.1 | ColumnagentArpAclName | read-create | current | Name of the ARP ACL, which must consist of 1 to 31 alphanumeric characters and uniquely identify this ARP ACL. This object must be set to complete a new ARP AC… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.23.1.1.2 | ColumnagentArpAclRowStatus | read-create | current | The status of this conceptual row. Entries can not be deleted until all rows in agentArpAclRuleConfigTable with corresponding values of agentArpAclName have be… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.23.2 | TableagentArpAclRuleTable | not-accessible | obsolete | A table of the ARP ACL Rule entries. The functionality that was offered by this table is now available through the agentArpAclRuleConfigTable, although with di… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.23.2.1 | RowagentArpAclRuleEntry | not-accessible | obsolete | Represents entry for a set of ARP ACL-match rules |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.23.2.1.1 | ColumnagentArpAclRuleMatchSenderIpAddr | read-create | obsolete | Sender IP address match value for the ARP ACL. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.23.2.1.2 | ColumnagentArpAclRuleMatchSenderMacAddr | read-create | obsolete | Sender MAC address match value for the ARP ACL. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.23.2.1.3 | ColumnagentArpAclRuleRowStatus | read-create | obsolete | The status of this conceptual row. active(1) - this ACL Rule is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value … |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.23.3 | TableagentArpAclRemarkConfigTable | not-accessible | current | A table for configuration of ARP ACL remarks entries. Created remarks will be associated with ARP ACL rule when the rule is created. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.23.3.1 | RowagentArpAclRemarkConfigEntry | not-accessible | current | The row in ARP ACL remarks configuration table. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.23.3.1.1 | ColumnagentArpAclRemarkIndex | read-create | current | Index of remark(not associated with a rule) instance within ARP ACL. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.23.3.1.2 | ColumnagentArpAclRemarkStr | read-create | current | ARP ACL remark(comment) string configuration. Each remark line is limited to 100 characters. Remark may consist of characters in the range A-Z, a-z, 0-9 and sp… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.23.3.1.3 | ColumnagentArpAclRemarkStatus | read-create | current | Status of this instance. active(1) - this remark is configured. createAndGo(4) - set to this value to create the remark entry. agentArpAclRemarkStr should be s… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.23.4 | TableagentArpAclRemarkRuleTable | not-accessible | obsolete | This table displays remarks which are associated with ARP ACL rules. Each rule can be uniquely identified with ARP ACL name, IP and MAC addresses. Each remark … |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.23.4.1 | RowagentArpAclRemarkRuleEntry | not-accessible | obsolete | Row of the ARP ACL rule remarks table. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.23.4.1.1 | ColumnagentArpAclRuleRemarkIndex | read-only | obsolete | The index of the remark instance within ARP ACL rule. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.23.4.1.2 | ColumnagentArpAclRuleRemarkStr | read-only | obsolete | Displays the remark string for the specified ARP ACL rule. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.23.4.1.3 | ColumnagentArpAclRuleRemarkStatus | read-create | obsolete | Status of this instance. active(1) - this remark is configured. destroy(6) - set to this value to delete the remark entry. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.23.5 | TableagentArpAclRuleConfigTable | not-accessible | current | A table of ARP ACL Rule entries |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.23.5.1 | RowagentArpAclRuleConfigEntry | not-accessible | current | Represents entry for a set of ARP ACL match criteria |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.23.5.1.1 | ColumnagentArpAclRuleConfigIndex | not-accessible | current | Sequence number of the rule within the ARP ACL. A value of 0 is special in that it is used to automatically assign the next higher available rule sequence numb… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.23.5.1.2 | ColumnagentArpAclRuleConfigSenderIpAddr | read-create | current | Sender IP address match value for the ARP ACL. A value of 0.0.0.0 indicates 'any-ipv4 address' matching. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.23.5.1.3 | ColumnagentArpAclRuleConfigSenderMacAddr | read-create | current | Sender MAC address match value for the ARP ACL. A value of 00:00:00:00:00:00 indicates 'any-mac' matching. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.23.5.1.4 | ColumnagentArpAclRuleConfigAction | read-create | current | Action to be taken when this rule is hit: permit(1) - ARP packet matching this rule is forwarded deny(2) - ARP packet matching this rule is dropped |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.23.5.1.5 | ColumnagentArpAclRuleConfigStatus | read-create | current | The status of this conceptual row. active(1) - this ACL Rule is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value … |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.23.6 | TableagentArpAclRemarkRuleConfigTable | not-accessible | current | This table displays remarks which are associated with ARP ACL rules. Each ARP ACL rule is uniquely identified with ARP ACL name and ARP ACL rule sequence numbe… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.23.6.1 | RowagentArpAclRemarkRuleConfigEntry | not-accessible | current | Row in the ARP ACL rule remarks table. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.23.6.1.1 | ColumnagentArpAclRemarkRuleConfigIndex | not-accessible | current | The index of this remark instance within a ARP ACL rule. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.23.6.1.2 | ColumnagentArpAclRemarkRuleConfigStr | read-only | current | Displays the remark string for the specified ARP ACL rule. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.23.6.1.3 | ColumnagentArpAclRemarkRuleConfigStatus | read-create | current | Status of this instance. active(1) - this remark is configured. destroy(6) - delete the remark entry. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24 | NodeagentDhcpSnoopingConfigGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.1 | ScalaragentDhcpSnoopingAdminMode | read-write | current | This object indicates whether DHCP Snooping is enabled globally. If this object is set to 'true',admin mode is enabled globally. If this object is set to 'fals… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.2 | ScalaragentDhcpSnoopingVerifyMac | read-write | current | This object indicates whether source Mac address in the received DHCP Message needs to be verified or not. If this object is set to 'true',verifyMac is enabled… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.3 | TableagentDhcpSnoopingVlanConfigTable | not-accessible | current | A table provides the mechanism to control DHCP SNOOPING per VLAN. When a VLAN is created in a device supporting this table, a corresponding entry of this table… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.3.1 | RowagentDhcpSnoopingVlanConfigEntry | not-accessible | current | A row instance contains the configuration for DHCP SNOOPING at each existing VLAN. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.3.1.1 | ColumnagentDhcpSnoopingVlanIndex | not-accessible | current | This object indicates the VLAN number on which DHCP SNOOPING Inspection feature is configured. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.3.1.2 | ColumnagentDhcpSnoopingVlanEnable | read-write | current | This object indicates whether DHCP SNOOPING is enabled in this VLAN. If this object is set to 'true', DHCP SNOOPING is enabled. If this object is set to 'false… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.4 | TableagentDhcpSnoopingIfConfigTable | not-accessible | current | A table provides the mechanism to configure the trust state for DHCP snooping purpose at each physical interface capable of this feature. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.4.1 | RowagentDhcpSnoopingIfConfigEntry | not-accessible | current | A row instance contains the configuration for DHCP snooping at each physical interface capable of this feature. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.4.1.1 | ColumnagentDhcpSnoopingIfTrustEnable | read-write | current | This object indicates whether the interface is trusted for DHCP snooping purpose. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.4.1.2 | ColumnagentDhcpSnoopingIfLogEnable | read-write | current | This object indicates whether the Logging needs on DHCP snooping validations or not |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.4.1.3 | ColumnagentDhcpSnoopingIfRateLimit | read-write | current | This object indicates rate limit value for DHCP Snooping purpose. If the incoming rate of DHCP packets exceeds the value of this object for consecutively burst… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.4.1.4 | ColumnagentDhcpSnoopingIfBurstInterval | read-write | current | This object indicates the burst interval value for rate limiting purpose on this interface. Value of -1 indicates that there is no burst interval. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.5 | TableagentIpsgIfConfigTable | not-accessible | current | A table provides the mechanism to configure the IPSG at each physical interface capable of this feature. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.5.1 | RowagentIpsgIfConfigEntry | not-accessible | current | A row instance contains the configuration for IPSG at each physical interface capable of this feature. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.5.1.1 | ColumnagentIpsgIfVerifySource | read-write | current | This object indicates whether IP packets received on this interface are filtered based on whether IP Source Guard considers the source IP address to be a valid… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.5.1.2 | ColumnagentIpsgIfPortSecurity | read-write | current | This object indicates whether IP packets received on this interface are filtered based on whether IP Source Guard considers the source MAC address to be a vali… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.6 | ScalaragentDhcpSnoopingStatsReset | read-write | current | Clear the DHCP snooping statistics on all ports. A value of reset(1) is used to reset the statistics. A read on this object will always return the value none(0… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.7 | TableagentDhcpSnoopingStatsTable | not-accessible | current | A table provides the mechanism for statics of DHCP snooping. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.7.1 | RowagentDhcpSnoopingStatsEntry | not-accessible | current | A row instance contains the DHCP snooping statistics per VLAN. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.7.1.1 | ColumnagentDhcpSnoopingMacVerifyFailures | read-only | current | This object indicates the number of failure verifications of client mac address with source mac address |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.7.1.2 | ColumnagentDhcpSnoopingInvalidClientMessages | read-only | current | This object indicates the number of invalid DHCP releases and denay messages |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.7.1.3 | ColumnagentDhcpSnoopingInvalidServerMessages | read-only | current | This object indicates the number of invalid DHCP server mesaages |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.8 | TableagentStaticIpsgBindingTable | not-accessible | current | A table of the IPSG static entries |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.8.1 | RowagentStaticIpsgBindingEntry | not-accessible | current | Represents a binding in IPSG table |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.8.1.1 | ColumnagentStaticIpsgBindingIfIndex | read-create | current | Interface on which this IPSG binding is going to be added. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.8.1.2 | ColumnagentStaticIpsgBindingVlanId | read-create | current | VLAN to whcig this IPSG binding is going to be added. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.8.1.3 | ColumnagentStaticIpsgBindingIpAddr | read-create | current | IP address match value for the IPSG Binding. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.8.1.4 | ColumnagentStaticIpsgBindingMacAddr | read-create | current | MAC address match value for the IPSG Binding. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.8.1.5 | ColumnagentStaticIpsgBindingRowStatus | read-create | current | The status of this conceptual row. active(1) - this IPSG Binding is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this va… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.9 | TableagentDynamicIpsgBindingTable | not-accessible | current | A table of the IPSG dynamic entries |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.9.1 | RowagentDynamicIpsgBindingEntry | not-accessible | current | Represents a binding in IPSG table |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.9.1.1 | ColumnagentDynamicIpsgBindingIfIndex | read-only | current | Interface on which this IPSG binding is added. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.9.1.2 | ColumnagentDynamicIpsgBindingVlanId | read-only | current | VLAN to whcig this IPSG binding is going to be added. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.9.1.3 | ColumnagentDynamicIpsgBindingIpAddr | read-only | current | Sender IP address match value for the IPSG Binding. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.9.1.4 | ColumnagentDynamicIpsgBindingMacAddr | read-only | current | MAC address match value for the IPSG Binding. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.10 | TableagentStaticDsBindingTable | not-accessible | current | A table of the DHCP SNOOPING static entries |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.10.1 | RowagentStaticDsBindingEntry | not-accessible | current | Represents a binding in DHCP SNOOPING table |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.10.1.1 | ColumnagentStaticDsBindingIfIndex | read-create | current | Interface on which this DHCP SNOOPING binding is going to be added. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.10.1.2 | ColumnagentStaticDsBindingVlanId | read-create | current | VLAN to which this DHCP SNOOPING binding is going to be added. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.10.1.3 | ColumnagentStaticDsBindingMacAddr | read-create | current | MAC address match value for the DHCP SNOOPING Binding. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.10.1.4 | ColumnagentStaticDsBindingIpAddr | read-create | current | IP address match value for the DHCP SNOOPING Binding. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.10.1.5 | ColumnagentStaticDsBindingRowStatus | read-create | current | The status of this conceptual row. active(1) - this DHCP SNOOPING Binding is active createAndGo(4) - set to this value to create an instance destroy(6) - set t… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.11 | TableagentDynamicDsBindingTable | not-accessible | current | A table of the DHCP SNOOPING Dynamic entries |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.11.1 | RowagentDynamicDsBindingEntry | not-accessible | current | Represents a binding in DHCP SNOOPING table |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.11.1.1 | ColumnagentDynamicDsBindingIfIndex | read-only | current | Interface on which this DHCP SNOOPING binding is going to be added. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.11.1.2 | ColumnagentDynamicDsBindingVlanId | read-only | current | VLAN to whcig this DHCP SNOOPING binding is going to be added. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.11.1.3 | ColumnagentDynamicDsBindingMacAddr | read-only | current | MAC address match value for the DHCP SNOOPING Binding. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.11.1.4 | ColumnagentDynamicDsBindingIpAddr | read-only | current | IP address match value for the DHCP SNOOPING Binding. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.11.1.5 | ColumnagentDynamicDsBindingLeaseRemainingTime | read-only | current | This specifies the period for which the DHCP SNOOPING Binding is valid. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.12 | ScalaragentDhcpSnoopingRemoteFileName | read-write | current | This object indicates the file name on the remote machine to save the DHCP Snooping bindings. This will be set only when we have a valid remote IP. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.13 | ScalaragentDhcpSnoopingRemoteIpAddr | read-write | current | This object indicates the IP address of the remote machine to save the DHCP Snooping bindings. This will be set only when we have a valid file name. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.14 | ScalaragentDhcpSnoopingStoreInterval | read-write | current | This object indicates the perodic time interval to save the DHCP Snooping bindings. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.26 | NodeagentSwitchAddressConflictGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.26.1 | ScalaragentSwitchAddressConflictDetectionStatus | read-only | current | Displays if an address conflict was detected on the switch since the last reset of the status. Set to 'true' if detected, 'false' otherwise. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.26.2 | ScalaragentSwitchAddressConflictDetectionStatusReset | read-write | current | Clear the last address conflict detection status in the switch. A value of reset(1) is used to reset the status. A read on this object always returns the value… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.26.3 | ScalaragentSwitchLastConflictingIPAddr | read-only | current | The reported conflicting IP address on the switch since the last reset of the conflict detection status. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.26.4 | ScalaragentSwitchLastConflictingMacAddr | read-only | current | The MAC address of the host corresponding to the reported conflicting IP address on the switch since the last reset of the conflict detection status. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.26.5 | ScalaragentSwitchLastConflictReportedTime | read-only | current | Time since the last address conflict was detected. It is displayed in days, hours, minutes and seconds. It is set to a valid value only when the conflict detec… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.26.6 | ScalaragentSwitchConflictIPAddr | accessible-for-notify | current | The IP address on the switch reported to have a conflict with another host's IP address. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.26.7 | ScalaragentSwitchConflictMacAddr | accessible-for-notify | current | The MAC address of the host that has an IP address conflicting with the IP address on the switch. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.26.8 | ScalaragentSwitchAddressConflictDetectionRun | read-write | current | Trigger the action to run the active address conflict detection. A value of run(1) is used to issue the action command. A read on this object always returns th… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.27 | NodeagentSdmPreferConfigEntry | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.27.1 | ScalaragentSdmPreferCurrentTemplate | read-only | current | Displays the current active SDM Template. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.27.2 | ScalaragentSdmPreferNextTemplate | read-write | current | Configures the next active template. It will be active only after the next reboot. To revert to the default template after the next reboot, use the option defa… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.28 | NodeagentSdmTemplateSummaryTable | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.28.1 | TableagentSdmTemplateTable | not-accessible | current | Displays Switch Database Management Template Information. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.28.1.1 | RowagentSdmTemplateEntry | not-accessible | current | Information about a SDM Template table entry. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.28.1.1.1 | ColumnagentSdmTemplateId | not-accessible | current | The SDM Template type this instance is associated with. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.28.1.1.2 | ColumnagentArpEntries | read-only | current | The maximum number of entries in the IPv4 Address Resolution Protocol (ARP) cache for routing interfaces. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.28.1.1.3 | ColumnagentIPv4UnicastRoutes | read-only | current | The maximum number of IPv4 unicast forwarding table entries. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.28.1.1.4 | ColumnagentIPv6NdpEntries | read-only | current | The maximum number of IPv6 Neighbor Discovery Protocol (NDP) cache entries. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.28.1.1.5 | ColumnagentIPv6UnicastRoutes | read-only | current | The maximum number of IPv6 unicast forwarding table entries. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.28.1.1.6 | ColumnagentEcmpNextHops | read-only | current | The maximum number of Equal cost next hops that can be installed in the IPv4 and IPv6 unicast forwarding tables. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.28.1.1.7 | ColumnagentIPv4MulticastRoutes | read-only | current | The maximum number of IPv4 multicast forwarding table entries. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.28.1.1.8 | ColumnagentIPv6MulticastRoutes | read-only | current | The maximum number of IPv6 multicast forwarding table entries. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.29 | NodeagentSwitchCutThroughGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.29.1 | ScalaragentSwitchCutThroughConfigMode | read-write | current | Mode changes are effective from the next reload of the Switch. The cut-through feature may not be present on all switches. Use - agentSwitchCutThroughRunningMo… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.29.2 | ScalaragentSwitchCutThroughRunningModeStatus | read-only | current | This gives the current running mode of the cut-through feature on switch. Note that Mode changes are effective from the next reload of the Switch. so running m… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.29.3 | ScalaragentSwitchCutThroughConfiguredModeStatus | read-only | current | This gives the configured mode of cut-through feature on switch. Note that Mode changes are effective from the next reload of the Switch. so running mode may b… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.30 | NodeagentPortTypeGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.30.1 | IdentityagentPortType40GigBaseX | obsolete | Obsoleted by dot3MauType40GbaseCR4 | |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.30.2 | IdentityagentPortType20GigBaseX | current | X PCS/PMA, unknown PMD. MAU MIB augmentation | |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.30.3 | IdentityagentPortType25GigBaseX | current | X PCS/PMA, unknown PMD. MAU MIB augmentation | |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.30.4 | IdentityagentPortType2pt5GigBaseX | current | X PCS/PMA, unknown PMD. MAU MIB augmentation | |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.30.5 | IdentityagentPortType5GigBaseX | current | X PCS/PMA, unknown PMD. MAU MIB augmentation | |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.31 | NodeagentPrivateVlanGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.31.1 | TableagentPrivateVlanTable | not-accessible | deprecated | |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.31.1.1 | RowagentPrivateVlanEntry | not-accessible | deprecated | |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.31.1.1.1 | ColumnagentPrivateVlanType | read-write | deprecated | Enables vlan for Private Vlan and configures private vlan type. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.31.1.1.2 | ColumnagentPrivateVlanAssociate | read-write | deprecated | This field lists all the VlanIDs which are associated with the selected vlan. If the selected vlan type is not primary(1), a zero-length bitmask is returned. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.31.2 | TableagentPrivateVlanIntfAssocTable | not-accessible | deprecated | |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.31.2.1 | RowagentPrivateVlanIntfAssocEntry | not-accessible | deprecated | |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.31.2.1.1 | ColumnagentPrivateVlanIntfAssocHostPrimary | read-write | deprecated | Configures the primary host vlan association with the interface. This must be configured along with agentPrivateVlanIntfAssocHostSecondary before the associati… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.31.2.1.2 | ColumnagentPrivateVlanIntfAssocHostSecondary | read-write | deprecated | Configures the secondary host vlan association with the interface. This must be configured along with agentPrivateVlanIntfAssocHostPrimary before the associati… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.31.2.1.3 | ColumnagentPrivateVlanIntfAssocPromiscuousPrimary | read-write | deprecated | Configures the primary promiscuous vlan association with the interface. This must be configured along with agentPrivateVlanIntfAssocPromiscuousSecondary before… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.31.2.1.4 | ColumnagentPrivateVlanIntfAssocPromiscuousSecondary | read-write | deprecated | Configures the secondary promiscuous vlan association with the interface. This must be configured along with agentPrivateVlanIntfAssocPromiscuousPrimary before… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.31.2.1.5 | ColumnagentPrivateVlanIntfAssocOperational | read-only | deprecated | Shows the operational private vlans associated with the interface. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.31.2.1.6 | ColumnagentPrivateVlanIntfAssocPromiscuousTrunkNativeVlan | read-write | deprecated | Configures the native VLAN on promiscuous or isolated trunk port. Untagged packets received on this trunk port are assigned this VLAN id. If native VLAN is not… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.31.2.1.7 | ColumnagentPrivateVlanIntfAssocPromiscuousTrunkAllowedVlan | read-write | deprecated | Configures the list of allowed normal VLANs and primary VLANs on promiscuous trunk port and allowed VLANs and secondary VLANs on isolated trunk port. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.31.2.1.8 | ColumnagentPrivateVlanIntfAssocPromiscuousTrunkPrimary | read-write | deprecated | Configures the primary VLAN with which the packets are tagged. This must be configured along with agentPrivateVlanIntfAssocPromiscuousTrunkSecondary before the… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.31.2.1.9 | ColumnagentPrivateVlanIntfAssocPromiscuousTrunkSecondary | read-write | deprecated | Configures the list of secondary VLANs associated with the primary VLAN configured with agentPrivateVlanIntfAssocPromiscuousTrunkPrimary before the association… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.31.2.1.10 | ColumnagentPrivateVlanIntfAssocIsolatedTrunkPrimary | read-write | deprecated | Configures the primary VLAN with which the packets are tagged. This must be configured along with agentPrivateVlanIntfAssocIsolatedTrunkSecondary before the as… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.31.2.1.11 | ColumnagentPrivateVlanIntfAssocIsolatedTrunkSecondary | read-write | deprecated | Configures the secondary isolated VLAN associated with the primary VLAN configured with agentPrivateVlanIntfAssocIsolatedTrunkPrimary before the association is… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.32 | NodeagentDhcpL2RelayConfigGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.32.1 | ScalaragentDhcpL2RelayAdminMode | read-write | current | This object indicates whether DHCP L2 Relay is enabled globally. If this object is set to 'true',admin mode is enabled globally. If this object is set to 'fals… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.32.2 | TableagentDhcpL2RelayIfConfigTable | not-accessible | current | A table provides the mechanism to enable/disable and configure the trust state for DHCP L2Relay purpose at each physical interface capable of this feature. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.32.2.1 | RowagentDhcpL2RelayIfConfigEntry | not-accessible | current | A row instance contains the configuration for DHCP L2 Relay at each physical interface capable of this feature. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.32.2.1.1 | ColumnagentDhcpL2RelayIfEnable | read-write | current | This object indicates whether the DHCP L2Relay is enabled or not |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.32.2.1.2 | ColumnagentDhcpL2RelayIfTrustEnable | read-write | current | This object indicates whether the interface is trusted for DHCP L2 Relay purpose. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.32.3 | TableagentDhcpL2RelayVlanConfigTable | not-accessible | current | A table provides the mechanism to control DHCP L2 Relay per VLAN. When a VLAN is created in a device supporting this table, a corresponding entry of this table… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.32.3.1 | RowagentDhcpL2RelayVlanConfigEntry | not-accessible | current | A row instance contains the configuration for DHCP L2 Relay at each existing VLAN. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.32.3.1.1 | ColumnagentDhcpL2RelayVlanIndex | not-accessible | current | This object indicates the VLAN number on which DHCP L2 Relay feature is configured. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.32.3.1.2 | ColumnagentDhcpL2RelayVlanEnable | read-write | current | This object indicates whether DHCP L2 Relay is enabled in this VLAN. If this object is set to 'true', DHCP L2 Relay is enabled. If this object is set to 'false… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.32.3.1.3 | ColumnagentDhcpL2RelayCircuitIdVlanEnable | read-write | current | This object indicates whether DHCP CircuitId is enabled for L2 relaying in this VLAN. If this object is set to 'true', DHCP CircuitId is enabled. If this objec… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.32.3.1.4 | ColumnagentDhcpL2RelayRemoteIdVlanEnable | read-write | current | When this object is set with a non-empty string, DHCP RemoteId is enabled for L2 relaying in this VLAN. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.32.6 | ScalaragentDhcpL2RelayStatsReset | read-write | current | Clear the DHCP L2Relay statistics on all ports. A value of reset(1) is used to reset the statistics. A read on this object will always return the value none(0)… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.32.7 | TableagentDhcpL2RelayStatsTable | not-accessible | current | A table provides the mechanism for statics of DHCP L2 Relay. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.32.7.1 | RowagentDhcpL2RelayStatsEntry | not-accessible | current | A row instance contains the DHCP L2Relay statistics per interface. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.32.7.1.1 | ColumnagentDhcpL2RelayUntrustedSrvrMsgsWithOptn82 | read-only | current | This object indicates the number of DHCP server messages received with Option-82 field on the untrusted interface. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.32.7.1.2 | ColumnagentDhcpL2RelayUntrustedClntMsgsWithOptn82 | read-only | current | This object indicates the number of DHCP client messages received with Option-82 field on the untrusted interface. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.32.7.1.3 | ColumnagentDhcpL2RelayTrustedSrvrMsgsWithoutOptn82 | read-only | current | This object indicates the number of DHCP server messages received without Option-82 field on the trusted interface. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.32.7.1.4 | ColumnagentDhcpL2RelayTrustedClntMsgsWithoutOptn82 | read-only | current | This object indicates the number of DHCP client messages received without Option-82 field on the trusted interface. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33 | NodeagentDhcpv6SnoopingConfigGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.1 | ScalaragentDhcpv6SnoopingAdminMode | read-write | current | This object indicates whether DHCPv6 snooping is enabled globally. If this object is set to 'true', admin mode is enabled globally. If this object is set to 'f… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.2 | ScalaragentDhcpv6SnoopingVerifyMac | read-write | current | This object indicates whether source MAC address in the received DHCPv6 message needs to be verified or not. If this object is set to 'true', verifyMac is enab… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.3 | TableagentDhcpv6SnoopingVlanConfigTable | not-accessible | current | A table provides the mechanism to control DHCPv6 cnooping per VLAN. When a VLAN is created in a device supporting this table, a corresponding entry of this tab… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.3.1 | RowagentDhcpv6SnoopingVlanConfigEntry | not-accessible | current | A row instance contains the configuration for DHCPv6 snooping at each existing VLAN. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.3.1.1 | ColumnagentDhcpv6SnoopingVlanIndex | not-accessible | current | This object indicates the VLAN number on which DHCPv6 snooping inspection feature is configured. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.3.1.2 | ColumnagentDhcpv6SnoopingVlanEnable | read-write | current | This object indicates whether DHCPv6 snooping is enabled in this VLAN. If this object is set to 'true', DHCPv6 snooping is enabled. If this object is set to 'f… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.4 | TableagentDhcpv6SnoopingIfConfigTable | not-accessible | current | A table provides the mechanism to configure the trust state for DHCPv6 snooping purpose at each interface capable of this feature. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.4.1 | RowagentDhcpv6SnoopingIfConfigEntry | not-accessible | current | A row instance contains the configuration for DHCPv6 snooping at each interface capable of this feature. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.4.1.1 | ColumnagentDhcpv6SnoopingIfTrustEnable | read-write | current | This object indicates whether the interface is trusted for DHCPv6 snooping purpose. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.4.1.2 | ColumnagentDhcpv6SnoopingIfLogEnable | read-write | current | This object indicates whether the logging needs on DHCPv6 snooping validations or not. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.4.1.3 | ColumnagentDhcpv6SnoopingIfRateLimit | read-write | current | This object indicates rate limit value for DHCPv6 snooping purpose. If the incoming rate of DHCPv6 packets exceeds the value of this object for consecutively b… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.4.1.4 | ColumnagentDhcpv6SnoopingIfBurstInterval | read-write | current | This object indicates the burst interval value for rate limiting purpose on this interface. Value of -1 indicates that there is no burst interval. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.5 | TableagentIpv6sgIfConfigTable | not-accessible | current | A table provides the mechanism to configure the IPv6SG at each physical interface capable of this feature. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.5.1 | RowagentIpv6sgIfConfigEntry | not-accessible | current | A row instance contains the configuration for IPv6SG at each physical interface capable of this feature. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.5.1.1 | ColumnagentIpv6sgIfVerifySource | read-write | current | This object indicates whether the interface is enabled for IPv6SG to forward the data based up on source IP address. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.5.1.2 | ColumnagentIpv6sgIfPortSecurity | read-write | current | This object indicates whether the interface is enabled for IPv6SG to forward the data based up on source mac address in snooping table. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.6 | ScalaragentDhcpv6SnoopingStatsReset | read-write | current | Clear the DHCPv6 snooping statistics on all ports. A value of reset(1) is used to reset the statistics. A read on this object will always return the value none… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.7 | TableagentDhcpv6SnoopingStatsTable | not-accessible | current | A table provides the mechanism for statics of DHCPv6 snooping. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.7.1 | RowagentDhcpv6SnoopingStatsEntry | not-accessible | current | A row instance contains the DHCPv6 snooping statistics per interface. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.7.1.1 | ColumnagentDhcpv6SnoopingMacVerifyFailures | read-only | current | This object indicates the number of failure verifications of client MAC address with source MAC address. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.7.1.2 | ColumnagentDhcpv6SnoopingInvalidClientMessages | read-only | current | This object indicates the number of invalid DHCPv6 release, request and decline messages. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.7.1.3 | ColumnagentDhcpv6SnoopingInvalidServerMessages | read-only | current | This object indicates the number of invalid DHCPv6 server mesaages. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.8 | TableagentStaticIpv6sgBindingTable | not-accessible | current | A table of the IPv6SG static entries. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.8.1 | RowagentStaticIpv6sgBindingEntry | not-accessible | current | Represents a binding in IPv6SG table. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.8.1.1 | ColumnagentStaticIpv6sgBindingIfIndex | read-create | current | Interface on which this IPv6SG binding is going to be added. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.8.1.2 | ColumnagentStaticIpv6sgBindingVlanId | read-create | current | VLAN to which this IPv6SG binding is going to be added. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.8.1.3 | ColumnagentStaticIpv6sgBindingIpAddr | read-create | current | IPv6 address match value for the IPv6SG binding. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.8.1.4 | ColumnagentStaticIpv6sgBindingMacAddr | read-create | current | MAC address match value for the IPv6SG binding. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.8.1.5 | ColumnagentStaticIpv6sgBindingRowStatus | read-create | current | The status of this conceptual row. active(1) - this IPv6SG Binding is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this … |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.9 | TableagentDynamicIpv6sgBindingTable | not-accessible | current | A table of the IPv6SG dynamic entries. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.9.1 | RowagentDynamicIpv6sgBindingEntry | not-accessible | current | Represents a binding in IPSG table. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.9.1.1 | ColumnagentDynamicIpv6sgBindingIfIndex | read-only | current | Interface on which this IPv6SG binding is added. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.9.1.2 | ColumnagentDynamicIpv6sgBindingVlanId | read-only | current | VLAN to which this IPv6SG binding is going to be added. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.9.1.3 | ColumnagentDynamicIpv6sgBindingIpAddr | read-only | current | Sender IPv6 address match value for the IPv6SG binding. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.9.1.4 | ColumnagentDynamicIpv6sgBindingMacAddr | read-only | current | MAC address match value for the IPv6SG binding. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.10 | TableagentStaticDsv6BindingTable | not-accessible | current | A table of the DHCPv6 snooping static entries. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.10.1 | RowagentStaticDsv6BindingEntry | not-accessible | current | Represents a static binding in DHCPv6 snooping table. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.10.1.1 | ColumnagentStaticDsv6BindingIfIndex | read-create | current | Interface on which this static DHCPv6 snooping binding is going to be added. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.10.1.2 | ColumnagentStaticDsv6BindingVlanId | read-create | current | VLAN to which this static DHCPv6 snooping binding is going to be added. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.10.1.3 | ColumnagentStaticDsv6BindingMacAddr | read-create | current | MAC address match value for the static DHCPv6 snooping binding. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.10.1.4 | ColumnagentStaticDsv6BindingIpAddr | read-create | current | IPv6 address match value for the static DHCPv6 snopoing binding. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.10.1.5 | ColumnagentStaticDsv6BindingRowStatus | read-create | current | The status of this conceptual row. active(1) - this static DHCPv6 snooping binding is active createAndGo(4) - set to this value to create an instance destroy(6… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.11 | TableagentDynamicDsv6BindingTable | not-accessible | current | A table of the DHCPv6 snooping dynamic entries. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.11.1 | RowagentDynamicDsv6BindingEntry | not-accessible | current | Represents a dynamic binding in DHCPv6 snooping table. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.11.1.1 | ColumnagentDynamicDsv6BindingIfIndex | read-only | current | Interface on which this dynamic DHCPv6 snooping binding is added. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.11.1.2 | ColumnagentDynamicDsv6BindingVlanId | read-only | current | VLAN to which this dynamic DHCPv6 snooping binding is added. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.11.1.3 | ColumnagentDynamicDsv6BindingMacAddr | read-only | current | MAC address match value for the dynamic DHCPv6 snooping binding. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.11.1.4 | ColumnagentDynamicDsv6BindingIpAddr | read-only | current | IPv6 address match value for the dynamic DHCPv6 snooping binding. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.11.1.5 | ColumnagentDynamicDsv6BindingLeaseRemainingTime | read-only | current | This specifies the period for which the dynamic DHCPv6 snooping binding is valid. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.12 | ScalaragentDhcpv6SnoopingRemoteFileName | read-write | current | This object indicates the file name on the remote machine to save the DHCPv6 snooping bindings. This will be set only when we have a valid remote IP. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.13 | ScalaragentDhcpv6SnoopingRemoteIpAddr | read-write | current | This object indicates the IP address of the remote machine to save the DHCPv6 snooping bindings. This will be set only when we have a valid file name. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.14 | ScalaragentDhcpv6SnoopingStoreInterval | read-write | current | This object indicates the perodic time interval to save the DHCPv6 snooping bindings. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.34 | TableagentSwitchSnoopSSMGroupTable | not-accessible | current | The (conceptual) table listing the IP multicast Source Specific Multicast Groups for which there are members on a particular interface and VLAN. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.34.1 | RowagentSwitchSnoopSSMGroupEntry | not-accessible | current | An entry (conceptual row) in the agentSwitchSnoopSSMGroupTable. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.34.1.1 | ColumnagentSwitchSnoopSSMGroupAddressType | not-accessible | current | The address type of the agentSwitchSnoopSSMGroupTable entry. This value applies to both the agentSwitchSnoopSSMGroupAddress and the agentSwitchSnoopSSMGroupLas… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.34.1.2 | ColumnagentSwitchSnoopSSMGroupAddress | not-accessible | current | The IP multicast group address for which this entry contains information. The InetAddressType, e.g. IPv4 or IPv6, is identified by the agentSwitchSnoopSSMGroup… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.34.1.3 | ColumnagentSwitchSnoopSSMGroupIfIndex | not-accessible | current | The interface for which this entry contains information for an IP multicast group address. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.34.1.4 | ColumnagentSwitchSnoopSSMGroupVlanId | not-accessible | current | The VLAN for which this entry contains information for an IP multicast group address. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.34.1.5 | ColumnagentSwitchSnoopSSMGroupLastReporter | read-only | current | The IP address of the source of the last membership report received for this IP Multicast group address on this interface and VLAN. The InetAddressType, e.g. I… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.34.1.6 | ColumnagentSwitchSnoopSSMGroupSourceFilterMode | read-only | current | The state in which the interface is currently set. The value indicates the relevance of the corresponding source list entries in the SrcList Table (agentSwitch… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.35 | TableagentSwitchSnoopSSMSrcListTable | not-accessible | current | The (conceptual) table listing the Source List entries corresponding to each VLAN, interface and SSM multicast group pair on a MGMD Snooping switch. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.35.1 | RowagentSwitchSnoopSSMSrcListEntry | not-accessible | current | An entry (conceptual row) in the agentSwitchSnoopSSMSrcListTable. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.35.1.1 | ColumnagentSwitchSnoopSSMSrcListAddressType | not-accessible | current | The address type of the InetAddress variables in this table. This value applies to the agentSwitchSnoopSSMSrcListHostAddress and agentSwitchSnoopSSMSrcListAddr… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.35.1.2 | ColumnagentSwitchSnoopSSMSrcListAddress | not-accessible | current | The IP multicast group address for which this entry contains information. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.35.1.3 | ColumnagentSwitchSnoopSSMSrcListIfIndex | not-accessible | current | The interface for which this entry contains information for an IP multicast group address. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.35.1.4 | ColumnagentSwitchSnoopSSMSrcListVlanId | not-accessible | current | The VLAN for which this entry contains information for an IP multicast group address. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.35.1.5 | ColumnagentSwitchSnoopSSMSrcListHostAddress | read-only | current | The host address to which this entry corresponds. The agentSwitchSnoopSSMGroupSourceFilterMode value for this Group address, interface and VLAN indicates wheth… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.36 | TableagentSwitchSnoopSSMFDBTable | not-accessible | current | MGMD Snooping Source Specific Multicast Forwarding database Table. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.36.1 | RowagentSwitchSnoopSSMFDBEntry | not-accessible | current | An entry is created by IGMP Snooping for each group learned in the VLAN. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.36.1.1 | ColumnagentSwitchSnoopSSMFDBVlanIndex | not-accessible | current | This object indicates the VLAN in which the group is learned. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.36.1.2 | ColumnagentSwitchSnoopSSMFDBGroupAddressType | not-accessible | current | This object indicates IP multicast address type learned by MGMD Snooping. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.36.1.3 | ColumnagentSwitchSnoopSSMFDBGroupAddress | not-accessible | current | This object indicates IP multicast address learned by MGMD Snooping. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.36.1.4 | ColumnagentSwitchSnoopSSMFDBSourceAddress | not-accessible | current | This object indicates IP Source address learned by MGMD Snooping. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.36.1.5 | ColumnagentSwitchSnoopSSMFDBIncludePortList | read-only | current | This object indicates the set of ports on which MGMD Membership Reports are received for the group indicating interest to receive traffic sent to the group. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.36.1.6 | ColumnagentSwitchSnoopSSMFDBExcludePortList | read-only | current | This object indicates the set of ports on which MGMD Membership Reports are received for the group indicating interest to not to receive traffic sent to the gr… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.37 | TableagentSwitchportConfigTable | not-accessible | current | |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.37.1 | RowagentSwitchportConfigEntry | not-accessible | current | |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.37.1.1 | ColumnagentSwitchportIntfIndex | read-only | current | The port or LAG number to be selected. Each port/LAG maps to an interface. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.37.1.2 | ColumnagentSwitchportMode | read-write | current | Configure the VLAN membership mode of a port. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.37.1.3 | ColumnagentSwitchportAccessVlanID | read-write | current | Configures the Access VLAN Id for the interface. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.37.1.4 | ColumnagentSwitchportTrunkNativeVlanID | read-write | current | Configures the Native VLAN Id for the interface. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.37.1.5 | ColumnagentSwitchportTrunkNativeVlanTagging | read-only | current | Describes the Native VLAN tagging for the interface. 'disable' mean that packets marked with Native VLAN are transmitted untagged from Trunk port. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.37.1.6 | ColumnagentSwitchportTrunkAllowedVlanList | read-write | current | Configures the allowed VLAN list of Trunk switch interface. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.37.1.7 | ColumnagentSwitchportGeneralUntaggedVlanList | read-only | current | Shows the allowed untagged VLAN list of general switch interface. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.37.1.8 | ColumnagentSwitchportGeneralTaggedVlanList | read-only | current | Shows the allowed tagged VLAN list of general switch interface. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.37.1.9 | ColumnagentSwitchportGeneralForbiddenVlanList | read-only | current | Shows the Forbidden VLAN list of general switch interface. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.37.1.10 | ColumnagentSwitchportGeneralDynamicallyAddedVlanList | read-only | current | Shows the list of dynamically added VLANs for general switch interface. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.37.1.11 | ColumnagentSwitchportOperMode | read-only | current | Fetch the operational switchport mode of a port. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.43 | NodeagentSwitchKeepaliveGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.43.1 | ScalaragentSwitchKeepaliveState | read-write | current | The keepalive state for the switch. enable (1) - enables keepalive on the switch. disable (2) - disables keepalive on the switch. The default switch keepalive … |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.43.2 | ScalaragentSwitchKeepaliveTransmitInterval | read-write | current | The keepalive state for the port. enable (1) - enables loop protect on the switch. disable (2) - disables loop protect on the switch. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.47 | NodeagentSwitchVlanStatsGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.47.1 | TableagentSwitchVlanStatsTable | not-accessible | current | VLAN Statistics Table |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.47.1.1 | RowagentSwitchVlanStatsEntry | not-accessible | current | Represents entry for VLAN Statistics Table |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.47.1.1.1 | ColumnagentSwitchVlanStatsVlanId | not-accessible | current | Requested VLAN ID |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.47.1.1.2 | ColumnagentSwitchVlanStatsStatus | read-create | current | Status of the statistics collection on the VLAN. Supported values: active(1) - valid entry createAndGo(4) - used to create a new entry destroy(6) - removes the… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.47.1.1.3 | ColumnagentSwitchVlanStatsReceiveBytes | read-only | current | Number of bytes received for a VLAN. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.47.1.1.4 | ColumnagentSwitchVlanStatsReceivePackets | read-only | current | Number of packets received for a VLAN. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.47.1.1.5 | ColumnagentSwitchVlanStatsReceiveDiscardBytes | read-only | current | Number of bytes received but discarded for a VLAN. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.47.1.1.6 | ColumnagentSwitchVlanStatsReceiveDiscardPackets | read-only | current | Number of packets received but discarded for a VLAN. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.47.1.1.7 | ColumnagentSwitchVlanStatsTransmitBytes | read-only | current | Number of bytes transmitted for a VLAN. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.47.1.1.8 | ColumnagentSwitchVlanStatsTransmitPackets | read-only | current | Number of packets transmitted for a VLAN. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.47.1.1.9 | ColumnagentSwitchVlanStatsTransmitDiscardBytes | read-only | current | Number of bytes discarded at egress for a VLAN. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.47.1.1.10 | ColumnagentSwitchVlanStatsTransmitDiscardPackets | read-only | current | Number of packets discarded at egress for a VLAN. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.47.1.1.11 | ColumnagentSwitchVlanStatsClear | read-create | current | When set to enable(1), all statistics for the VLAN will be cleared. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.48 | NodeagentSwitchMnObjGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.48.1 | NodeagentSwitchMnGlobalGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.48.1.1 | ScalaragentSwitchMnGlobalFeatureEnabled | read-write | current | This object indicates MAC notification feature is currently enabled or not. If the object value is set to false (2), feature is disabled and no notifications a… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.48.1.2 | ScalaragentSwitchMacNotificationInterval | read-write | current | This object specifies the interval between the MAC notifications generated by the device. If the value of agentSwitchMnTrapEnabled is true(1), the device will … |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.48.1.3 | ScalaragentSwitchMnMacAddressesLearnt | read-only | current | Indicates the number of MAC addresses learnt by the device. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.48.1.4 | ScalaragentSwitchMnMacAddressesRemoved | read-only | current | Indicates the number of MAC addresses removed from the forwarding database. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.48.1.5 | ScalaragentSwitchMnTrapEnabled | read-write | current | This object tells whether MAC change notifications will or will not be sent when there are MAC addresses learnt or removed/ages out from the device's forwardin… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.48.1.6 | ScalaragentSwitchMacNotificationsSent | read-only | current | Indicates the number of MAC notifications sent out by the device. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.48.1.7 | ScalaragentSwitchMnHistTableMaxLength | read-write | current | Maximum number of records that the agentSwitchMnHistoryTable can hold in the table. When the table is full, the oldest entry will be over written with a new MA… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.48.1.8 | TableagentSwitchMnHistoryTable | not-accessible | current | This table will archive the MAC change notification events generated by this device. The MAC change notification events are archived after those are sent to se… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.48.1.8.1 | RowagentSwitchMnHistoryEntry | not-accessible | current | A MAC change notification message that was previously sent by this device. Each entry is indexed by a message index. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.48.1.8.1.1 | ColumnagentSwitchMnHistIndex | not-accessible | current | agentSwitchMnHistIndex is an unique value. It specifies previously generated MAC notification event by the device. This index starts at 1 and increments by one… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.48.1.8.1.2 | ColumnagentSwitchMnHistRecord | read-only | current | This object contains the information of a MAC change notification event. The notification message contains a list of MAC adresses in the following format: '<op… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.48.1.8.1.3 | ColumnagentSwitchMnHistTimestamp | read-only | current | The value of sysUpTime when the agentSwitchMacChangedNotification was generated. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.48.2 | NodeagentSwitchMnInterfaceGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.48.2.1 | TableagentSwitchMnIfConfigTable | not-accessible | current | This table enables or disables the generation of MAC notification at each interface when MAC address is learnt or removed or aged out. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.48.2.1.1 | RowagentSwitchMnIfConfigEntry | not-accessible | current | Each entry contains the configuration for enabling the MAC notification at each interface. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.48.2.1.1.1 | ColumnagentSwitchMnMacLearntEnable | read-write | current | This object indicates whether this interface is enabled to send agentSwitchMacChangedNotification when it learns a new MAC address. This variable has no effect… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.48.2.1.1.2 | ColumnagentSwitchMnMacRemovedEnable | read-write | current | This object indicates whether this interface is enabled to send agentSwitchMacChangedNotification when a MAC address which it learnt previously is removed or a… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.49 | NodeagentIpv6RaGuardObjGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.49.1 | NodeagentIpv6RaGuardGlobalGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.49.1.1 | ScalaragentIpv6RADropCounter | read-only | current | Indicates the number of RA packets dropped in hardware. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.49.1.2 | ScalaragentIpv6RedirectDropCounter | read-only | current | Indicates the number of redirect packets dropped in hardware. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.49.2 | NodeagentIpv6RaGuardInterfaceGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.49.2.1 | TableagentIpv6RaGuardIfConfigTable | not-accessible | current | A table provides the mechanism to configure the RA Guard state at every interface capable of this feature. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.49.2.1.1 | RowagentIpv6RaGuardIfConfigEntry | not-accessible | current | A row instance contains the configuration to enable or disable RA Guard on an interface. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.49.2.1.1.1 | ColumnagentIpv6RaGuardIfEnabled | read-write | current | This object enables RA Guard on the interface, if set this object to 'enable'. Setting this object to 'disable' disables the RA Guard on the interface. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9 | NodeagentTransferConfigGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.1 | NodeagentTransferUploadGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.1.1 | ScalaragentTransferUploadMode | read-write | current | Transfer upload mode configures the mode to use when uploading from the switch. The mode is either X/Y/ZMODEM, TFTP, SFTP, FTP or SCP. X/Y/ZMODEM is valid only… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.1.2 | ScalaragentTransferUploadServerIP | read-write | deprecated | Transfer upload server ip configures the IP address of the server where the file is located. It is valid only when the Transfer Mode is TFTP, SFTP, or SCP. The… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.1.3 | ScalaragentTransferUploadPath | read-write | current | Transfer upload tftppath configures the directory path where the file is to be uploaded to. The switch remembers the last file path used. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.1.4 | ScalaragentTransferUploadFilename | read-write | current | Transfer upload tftpfilename configures the file name for the file being uploaded from the switch. It can be up to 32 alphanumeric characters. The switch remem… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.1.5 | ScalaragentTransferUploadDataType | read-write | current | Transfer upload datatype configures the type of file to upload from the switch. The types for upload are: - Code File - Configuration File - Operational log - … |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.1.6 | ScalaragentTransferUploadStart | read-write | current | Transfer upload start will start an upload transfer. The agentTransferUploadMode object must not be set to xmodem(2), ymodem(3), or zmodem(4) to initiate a tra… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.1.7 | ScalaragentTransferUploadStatus | read-only | current | Indicates the current status of an upload transfer. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.1.8 | ScalaragentTransferUploadServerAddressType | read-write | current | The type of the tftpserverip address, as defined in the InetAddress MIB. The agentTransferUploadServerAddress object is intepreted within the context of agentT… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.1.9 | ScalaragentTransferUploadServerAddress | read-write | current | Transfer upload tftpserverip configures the IP address of the server where the file is to be uploaded to.It is valid only when the Transfer Mode is TFTP, SFTP,… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.1.10 | ScalaragentTransferUploadImagename | read-write | current | Transfer upload image name. Sets the image to be uploaded as the specified name. Imagename cannot be set to unknown(1) option. When no name is set this object … |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.1.11 | ScalaragentTransferUploadUsername | read-write | current | Username applicable only to secure upload types, i.e., SFTP, FTP or SCP. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.1.12 | ScalaragentTransferUploadPassword | read-write | current | Password applicable only to secure upload types, i.e. SFTP, FTP or SCP. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.1.13 | ScalaragentTransferUploadRemoteFilename | read-write | current | Transfer upload remote filename configures the file name for the file being created remotely. It can be up to 32 alphanumeric characters. Note: File Name, File… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.2 | NodeagentTransferDownloadGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.2.1 | ScalaragentTransferDownloadMode | read-write | current | Transfer download mode configures the mode to use when downloading to the switch. The mode is either X/Y/ZMODEM, TFTP, SFTP, FTP or SCP. X/Y/ZMODEM is valid on… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.2.2 | ScalaragentTransferDownloadServerIP | read-write | deprecated | Transfer download tftpserverip configures the IP address of the server where the file is located. It is valid only when the Transfer Mode is TFTP, SFTP or SCP.… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.2.3 | ScalaragentTransferDownloadPath | read-write | current | Transfer download tftppath configures the directory path where the file is located. The switch remembers the last file path used. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.2.4 | ScalaragentTransferDownloadFilename | read-write | current | Transfer download tftpfilename configures the file name for the file being downloaded to the switch. It can be up to 32 alphanumeric characters. The switch rem… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.2.5 | ScalaragentTransferDownloadDataType | read-write | current | Transfer download datatype configures the type of file to download to the switch. The types for download are: code - Code File config-script - Configuration Fi… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.2.6 | ScalaragentTransferDownloadStart | read-write | current | Transfer download start will start an download transfer. The agentTransferDownloadMode object must not be set to xmodem(2), ymodem(3), or zmodem(4) to initiate… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.2.7 | ScalaragentTransferDownloadStatus | read-only | current | Indicates the current status of an download transfer. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.2.8 | ScalaragentTransferDownloadServerAddressType | read-write | current | The type of the tftpserverip address, as defined in the InetAddress MIB. The agentTransferDownloadServerAddress object is intepreted within the context of agen… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.2.9 | ScalaragentTransferDownloadServerAddress | read-write | current | Transfer download tftpserverip configures the IP address of the server where the file is to be downloaded from.It is valid only when the Transfer Mode is TFTP,… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.2.10 | ScalaragentTransferDownloadImagename | read-write | current | Transfer download image name. Sets the downloaded image as the specified name. Imagename cannot be set to unknown(1) option. When no name is set this object re… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.2.11 | ScalaragentTransferDownloadUsername | read-write | current | Username applicable only to secure download types, i.e., SFTP, FTP or SCP. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.2.12 | ScalaragentTransferDownloadPassword | read-write | current | Password applicable only to secure download types, i.e. SFTP, FTP or SCP. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.2.13 | ScalaragentTransferDownloadRemoteFilename | read-write | current | Transfer download remote filename configures the file name for the file being transferred from remote system. It can be up to 31 alphanumeric characters. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.2.14 | ScalaragentTransferDownloadCertificateNum | read-write | current | To assign the certificate number index for downloading SSL certificates |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.3 | NodeagentImageConfigGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.3.1 | ScalaragentImage1 | read-only | obsolete | The image1 software version . |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.3.2 | ScalaragentImage2 | read-only | obsolete | The image2 software version. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.3.3 | ScalaragentActiveImage | read-only | obsolete | The active image name. image1 or image2. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.3.4 | ScalaragentNextActiveImage | read-write | obsolete | The next active image name. user assigns either image1 or image2. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.3.5 | ScalaragentActiveImageVersion | read-only | current | The software version of the active image. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.3.6 | ScalaragentBackupImageVersion | read-only | current | The software version of the backup image if present. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.3.7 | ScalaragentNextSelectedImage | read-write | current | The image selected for loading on next boot. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.10 | NodeagentPortMirroringGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.10.1 | ScalaragentMirroredPortIfIndex | read-write | obsolete | IfIndex of the mirrored port |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.10.2 | ScalaragentProbePortIfIndex | read-write | obsolete | IfIndex of the probe port |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.10.3 | ScalaragentPortMirroringMode | read-write | obsolete | Port mirroring mode: enable - enable mirroring mode disable - disable mirroring mode delete - clear MirroredPort and Probe Port configuration |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.10.4 | TableagentPortMirrorTable | not-accessible | current | This table includes entries for each Port Mirroring session. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.10.4.1 | RowagentPortMirrorEntry | not-accessible | current | Provides configuration of a Port Mirroring session specifying the destination port, and the source Port Mask, providing a many-to-one mapping. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.10.4.1.1 | ColumnagentPortMirrorSessionNum | not-accessible | current | The Session number of this mirroring entry. The number of sessions is fixed, and is platform dependant. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.10.4.1.2 | ColumnagentPortMirrorDestinationPort | read-write | current | The port which traffic from the mirrored ports will be sent to. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.10.4.1.3 | ColumnagentPortMirrorSourcePortMask | read-write | current | The ports from which traffic will be sent to the destination port. The destination port can not be included in this list of ports. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.10.4.1.4 | ColumnagentPortMirrorAdminMode | read-write | current | The status of this port mirroring session. enable(1) - This session is active and all traffic from the source ports will be mirrored to the destination port. d… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.10.4.1.5 | ColumnagentPortMirrorSourceVlan | read-write | current | The vlan from which traffic will be sent to the destination port. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.10.4.1.6 | ColumnagentPortMirrorRemoteSourceVlan | read-write | current | The remote vlan from which traffic will be sent to the destination port. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.10.4.1.7 | ColumnagentPortMirrorRemoteDestinationVlan | read-write | current | The VLAN that forwards the network traffic to the destination switch. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.10.4.1.8 | ColumnagentPortMirrorReflectorPort | read-write | current | The port to which traffic from the mirrored ports will be sent in case of destination being remote VLAN. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.10.4.1.10 | ColumnagentPortMirrorIpAccessListNumber | read-write | current | The IP access-list number attached to the port mirroring session. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.10.4.1.11 | ColumnagentPortMirrorMacAccessListNumber | read-write | current | The MAC access-list number attached to the port mirroring session. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.10.4.1.12 | ColumnagentPortMirrorRemoteDstErspanSrcId | read-write | obsolete | The Source Flow ID number used by the Destination ERSPAN session to identify the ERSPAN traffic |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.10.4.1.13 | ColumnagentPortMirrorRemoteDstErspanSrcIp | read-write | obsolete | The Source IP address of Destination ERSPAN session from which traffic will be sent to the destination port |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.10.4.1.14 | ColumnagentPortMirrorRemoteSrcErspanDstId | read-write | current | The Destination Flow ID number used by the Source ERSPAN session to identify the ERSPAN traffic. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.10.4.1.15 | ColumnagentPortMirrorRemoteSrcErspanDstIp | read-write | current | The Destination IP address of Source ERSPAN session from which traffic will be received and sent to the destination port. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.10.4.1.16 | ColumnagentPortMirrorRemoteSrcErspanDstOriginIp | read-write | current | The Destination IP address of Source ERSPAN session, which will be used as the source of the ERSPAN traffic. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.10.4.1.17 | ColumnagentPortMirrorRemoteSrcErspanDstIpTtl | read-write | current | The IP time-to-live (TTL) value of the packets in the Source ERSPAN session traffic. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.10.4.1.18 | ColumnagentPortMirrorRemoteSrcErspanDstIpDscp | read-write | current | The differentiated services code point (DSCP) value of the packets in the Source ERSPAN session traffic. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.10.4.1.19 | ColumnagentPortMirrorRemoteSrcErspanDstIpPrec | read-write | current | The IP precedence value of the packets in the Source ERSPAN session traffic. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.10.4.1.20 | ColumnagentPortMirrorRemoteSrcErspanDstReflectorPort | read-write | obsolete | The port which traffic from the mirrored ports will be sent to in case of destination being Source ERSPAN. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.10.5 | TableagentPortMirrorTypeTable | not-accessible | current | This table includes entries for each source port's direction of port mirroring. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.10.5.1 | RowagentPortMirrorTypeEntry | not-accessible | current | Provides configuration of a Port Mirroring direction specifying the session of the port mirroring and source port |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.10.5.1.1 | ColumnagentPortMirrorTypeSourcePort | not-accessible | current | The port from which traffic will be sent to the destination port. This port should be a source port in the corresponding session |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.10.5.1.2 | ColumnagentPortMirrorTypeType | read-write | current | The direction of the data to be mirrored on this source port. tx(1) - The data that is transmitted from the source port. rx(2) - The data that is received on t… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.10.6 | ScalaragentPortMirrorRemoteVlan | read-write | obsolete | The VLAN configured as RSPAN VLAN. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.10.7 | TableagentPortMirrorRemoteVlanTable | not-accessible | current | A table of the RSPAN VLAN config entries |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.10.7.1 | RowagentPortMirrorRemoteVlanEntry | not-accessible | current | RSPAN VLAN config entry |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.10.7.1.1 | ColumnagentPortMirrorRemoteVlanIndex | read-create | current | The VLAN which is configured as a remote-span VLAN. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.10.7.1.2 | ColumnagentPortMirrorRemoteVlanRowStatus | read-create | current | The status of this entry. active(1) - the VLAN is configured as a remote-span VLAN createAndGo(4) - add the VLAN as a remote-span VLAN destroy(6) - remove the … |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.12 | TableagentDot3adAggPortTable | not-accessible | current | This table provides 802.3ad link aggregation information for each physical port that is not available through the standard MIB. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.12.1 | RowagentDot3adAggPortEntry | not-accessible | current | Information about a table entry. The agentDot3adAggPort identifies the external interface number of the port. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.12.1.1 | ColumnagentDot3adAggPort | read-only | current | ifIndex of this physical port |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.12.1.2 | ColumnagentDot3adAggPortLACPMode | read-write | current | Enable/disable 802.3ad LACP on this port |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13 | TableagentPortConfigTable | not-accessible | current | A table of the switch's physical port config entries |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1 | RowagentPortConfigEntry | not-accessible | current | Switch's physical port config entry |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.1 | ColumnagentPortDot1dBasePort | read-only | current | The port number of this port. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.2 | ColumnagentPortIfIndex | read-only | current | The switch's Port IfIndex |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.3 | ColumnagentPortIanaType | read-only | current | The switch's Port Type |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.4 | ColumnagentPortSTPMode | read-write | obsolete | The switch's Port Spanning Tree Protocol Mode STP mode values are: dot1d (the default) fast, indicates you want to use the fast spanning tree mode off, indicat… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.5 | ColumnagentPortSTPState | read-only | obsolete | The switch's Port Spanning Tree Protocol State. This object is only supported when the Dot1d Protocol is enabled. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.6 | ColumnagentPortAdminMode | read-write | current | The switch's Port Admin Mode |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.7 | ColumnagentPortPhysicalMode | read-write | obsolete | The switch's Port Speed Mode. This is the configured physical mode. This object is read-only for gigabit ports |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.8 | ColumnagentPortPhysicalStatus | read-only | obsolete | The switch's Port Physical Speed Status. This is the current actual speed. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.9 | ColumnagentPortLinkTrapMode | read-write | current | If enabled, link up and link down traps will be sent for this port. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.10 | ColumnagentPortClearStats | read-write | current | clear stats for this port only |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.11 | ColumnagentPortDefaultType | read-write | current | This object identifies the default administrative port type, to be used in conjunction with the operational port type denoted by agentPortType. The set of poss… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.13 | ColumnagentPortAutoNegAdminStatus | read-write | obsolete | This object identifies the administration status of auto negotiation for this port. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.14 | ColumnagentPortDot3FlowControlMode | read-write | current | Config flowcontrol allows you to enable or disable 802.3x flow control for this port. This value applies to only full-duplex mode ports. Enabling asymmetric fl… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.15 | ColumnagentPortDVlanTagMode | read-write | current | Controls the Double Vlan Tag mode on this port. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.16 | ColumnagentPortDVlanTagEthertype | read-write | current | Configures the Double Vlan Tag Ethertype for this port. If this object is supported, ethertype cannot be configured globally for the switch. Commonly used are … |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.17 | ColumnagentPortDVlanTagCustomerId | read-write | current | Configures the Customer ID for the Double Vlan Tag for this port. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.18 | ColumnagentPortMaxFrameSizeLimit | read-only | current | This object identifies the largest value that can be configured for agentPortMaxFrameSize |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.19 | ColumnagentPortMaxFrameSize | read-write | current | This object identifies the currently configured maximum frame size value for this port. The maximmum value that this object can be set to is the value of agent… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.20 | ColumnagentPortBroadcastControlMode | read-write | current | If enabled, broadcast storm recovery will function on this port. When you specify Enable for Broadcast Storm Recovery and the broadcast traffic on this Etherne… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.21 | ColumnagentPortBroadcastControlThreshold | read-write | current | Configures the broadcast storm recovery threshold for this port. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.22 | ColumnagentPortMulticastControlMode | read-write | current | If enabled, multicast storm recovery will function on this port. When you specify Enable for Multicast Storm Recovery and the multicast traffic on this Etherne… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.23 | ColumnagentPortMulticastControlThreshold | read-write | current | Configures the multicast storm recovery threshold for this port. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.24 | ColumnagentPortUnicastControlMode | read-write | current | If enabled, unicast storm recovery will function on this port. When you specify Enable for Unicast Storm Recovery and the unknown unicast traffic on this Ether… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.25 | ColumnagentPortUnicastControlThreshold | read-write | current | Configures the unicast storm recovery threshold for this port. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.26 | ColumnagentPortSwitchportMode | read-write | current | |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.27 | ColumnagentPortVoiceVlanMode | read-write | current | Describes and Configures the Port Voice VLAN Mode. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.28 | ColumnagentPortVoiceVlanID | read-write | current | Describes and Configures the Port Voice VLAN ID if the Voice Vlan Mode is Vlan ID. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.29 | ColumnagentPortVoiceVlanPriority | read-write | current | Describes and Configures the Port Voice VLAN Priority if the Voice Vlan Mode is dot1p. A value of 255 indicates that the priority is not configured. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.30 | ColumnagentPortVoiceVlanDataPriorityMode | read-write | current | Describes and Configures the Port Voice VLAN Data Priority Mode. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.31 | ColumnagentPortVoiceVlanOperationalStatus | read-only | current | Describes the Port Voice VLAN Operational Status. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.32 | ColumnagentPortVoiceVlanAuthenticationMode | read-write | deprecated | Describes and Configures the Port Voice VLAN Authentication Mode. It is enabled by default. To disable, following are the pre-requisites. Voice Vlan shall be e… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.33 | ColumnagentPortDot3FlowControlOperStatus | read-only | current | This object identifies operational status of the flow control per port. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.34 | ColumnagentPortTransceiverFwPartNumber | read-only | current | Firmware part number of 10GBASE-T transceiver. For other ports, or if module is not inserted, octet sting will be filled with 0xFF bytes. See also next field, … |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.35 | ColumnagentPortTransceiverFwRevision | read-only | current | Firmware revision of 10GBASE-T transceiver. For other ports, or if module is not inserted, octet sting will be filled with 0xFF bytes. See also previous field,… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.36 | ColumnagentPortBroadcastControlThresholdUnit | read-write | current | Configures the units of the threshold value to percentage of port speed or absolute packets per second. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.37 | ColumnagentPortMulticastControlThresholdUnit | read-write | current | Configures the units of the threshold value to percentage of port speed or absolute packets per second. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.38 | ColumnagentPortUnicastControlThresholdUnit | read-write | current | Configures the units of the threshold value to percentage of port speed or absolute packets per second. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.39 | ColumnagentPortVoiceVlanUntagged | read-write | current | Describes and Configures the Port Voice VLAN tagging mode. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.40 | ColumnagentPortVoiceVlanNoneMode | read-write | current | Describes and Configures the Port Voice VLAN None mode. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.41 | ColumnagentPortVoiceVlanDSCP | read-write | current | Describes and Configures the Port Voice VLAN DSCP value. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.42 | ColumnagentPortVoiceVlanAuthMode | read-write | current | Describes and Configures the Port Voice VLAN Authentication mode. Disable means authentication not required for voice devices when dot1x is enabled. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.43 | ColumnagentPortAccessVlanID | read-write | current | Describes and Configures the VLAN ID of access switch port. A value of 0 indicates that the switch port is not configured as access port. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.44 | ColumnagentPortSpeedDuplexStatus | read-write | current | This object is used to set the speed and duplex settings for a port. If auto-duplex(0) or speed-auto(3) is enabled, then auto-negotiation is enabled.If auto-du… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.46 | ColumnagentPortNativeVlanID | read-write | current | Describes and Configures the VLAN ID of Trunk switch port. Configures the Native VLAN Id for the port. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.47 | ColumnagentPortDDisableAutorecoveryTime | read-only | current | The time in seconds left to port autorecovery from D-Disable state. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.48 | ColumnagentPortDDisableComponents | read-only | current | The list of components put the port to D-Disable state. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.49 | ColumnagentPortLoadStatsInterval | read-write | current | The length of time for which data is used to compute load statistics. The value is given in seconds, and must be a multiple of 30. The allowable range is 30 to… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.50 | ColumnagentPortDDisableReason | read-only | current | The reason for which the port is set to D-Disable. Here reason is the enum assigned to the particular component. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.51 | ColumnagentPortBroadcastControlAction | read-write | current | Configures the action to be taken when broadcast storm control rate limit is reached. none(0) - No action is taken. shutdown(1) - Diag disable the interface on… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.52 | ColumnagentPortMulticastControlAction | read-write | current | Configures the action to be taken when multicast storm control rate limit is reached. none(0) - No action is taken. shutdown(1) - Diag disable the interface on… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.53 | ColumnagentPortUnicastControlAction | read-write | current | Configures the action to be taken when unicast storm control rate limit is reached. none(0) - No action is taken. shutdown(1) - Diag disable the interface on s… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.14 | NodeagentProtocolConfigGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.14.1 | ScalaragentProtocolGroupCreate | read-write | obsolete | Set to non-empty string to create a Protocol-Based VLAN group. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.14.2 | TableagentProtocolGroupTable | not-accessible | current | A table of the switch's Protocol-based VLAN entries |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.14.2.1 | RowagentProtocolGroupEntry | not-accessible | current | Switch's Protocol-based VLAN entry |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.14.2.1.1 | ColumnagentProtocolGroupId | not-accessible | current | Group identifier of the Protocol-based VLAN entry. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.14.2.1.2 | ColumnagentProtocolGroupName | read-write | current | Group name of the Protocol-based VLAN entry. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.14.2.1.3 | ColumnagentProtocolGroupVlanId | read-write | current | VLAN associated with the Protocol-based VLAN entry. Set to 0 to remove. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.14.2.1.4 | ColumnagentProtocolGroupProtocolIP | read-write | obsolete | The status of the IP protocol association with the Protocol-based VLAN entry. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.14.2.1.5 | ColumnagentProtocolGroupProtocolARP | read-write | obsolete | The status of the ARP protocol association with the Protocol-based VLAN entry. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.14.2.1.6 | ColumnagentProtocolGroupProtocolIPX | read-write | obsolete | The status of the IPX protocol association with the Protocol-based VLAN entry. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.14.2.1.7 | ColumnagentProtocolGroupStatus | read-create | current | The status of the Protocol-based VLAN entry. active(1) - this entry is active createAndGo(4) - used to create a new entry destroy(6) - remove this entry |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.14.3 | TableagentProtocolGroupPortTable | not-accessible | current | A table of the switch's physical port config entries |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.14.3.1 | RowagentProtocolGroupPortEntry | not-accessible | current | Switch's physical port config entry |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.14.3.1.1 | ColumnagentProtocolGroupPortIfIndex | read-only | current | The interface number of this instance. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.14.3.1.2 | ColumnagentProtocolGroupPortStatus | read-create | current | The status of this entry. active(1) - the port is associated with this group createAndGo(4) - add the port to this group createAndWait(5) - add the port to thi… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.14.4 | TableagentProtocolGroupProtocolTable | not-accessible | current | A table of the switch's physical port config entries |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.14.4.1 | RowagentProtocolGroupProtocolEntry | not-accessible | current | Switch's physical port config entry |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.14.4.1.1 | ColumnagentProtocolGroupProtocolID | not-accessible | current | The protocol ID of this instance. The value for IP is 2048 (0x0800), ARP is 2054 (0x0806) and IPX is 33079 (0x8137). Other protocol Ids in the range 1536 to 65… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.14.4.1.2 | ColumnagentProtocolGroupProtocolStatus | read-create | current | The status of this entry. active(1) - the port is associated with this group createAndGo(4) - add the port to this group createAndWait(5) - add the port to thi… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15 | NodeagentStpSwitchConfigGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.1 | ScalaragentStpConfigDigestKey | read-only | current | The MST configuration digest key. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.2 | ScalaragentStpConfigFormatSelector | read-only | current | The MST configuration format selector. A value other than 0 (zero) indicates non-support for the IEEE 802.1s standard. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.3 | ScalaragentStpConfigName | read-write | current | The MST configuration name of at most 32 characters. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.4 | ScalaragentStpConfigRevision | read-write | current | The MST configuration revision. The default value is 0. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.5 | ScalaragentStpForceVersion | read-write | current | The MST configuration force protocol version. The default version is dot1w. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.6 | ScalaragentStpAdminMode | read-write | current | The spanning tree operational status. enable(1) - enables spanning tree operational status on the switch. disable(2) - disables spanning tree operational statu… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.7 | TableagentStpPortTable | not-accessible | current | STP port table. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.7.1 | RowagentStpPortEntry | not-accessible | current | STP port entry. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.7.1.1 | ColumnagentStpPortState | read-write | current | The administrative STP state for the port. enable(1) - enables STP on the port. disable(2) - disables STP on the port. The default port STP state is enabled fo… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.7.1.2 | ColumnagentStpPortStatsMstpBpduRx | read-only | current | The MSTP BPDUs received on a specific port. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.7.1.3 | ColumnagentStpPortStatsMstpBpduTx | read-only | current | The MSTP BPDUs sent from a specific port. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.7.1.4 | ColumnagentStpPortStatsRstpBpduRx | read-only | current | The RSTP BPDUs received on a specific port. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.7.1.5 | ColumnagentStpPortStatsRstpBpduTx | read-only | current | The RSTP BPDUs sent from a specific port. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.7.1.6 | ColumnagentStpPortStatsStpBpduRx | read-only | current | The STP BPDUs received on a specific port. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.7.1.7 | ColumnagentStpPortStatsStpBpduTx | read-only | current | The STP BPDUs sent from a specific port. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.7.1.8 | ColumnagentStpPortUpTime | read-only | current | Time since port was reset. It is displayed in days, hours, minutes, and seconds. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.7.1.9 | ColumnagentStpPortMigrationCheck | read-write | current | Force the specified port to transmit RSTP or MSTP BPDU's. Supported values: false(0) - BPDUs are not to be transmitted. true(1) - BPDUs are to be transmitted A… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.7.1.10 | ColumnagentStpPortRootGuard | read-write | current | Manage root-guard on the specified interface. Supported values: false(0) - Root-guard is disabled. true(1) - Root-guard is enabled. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.8 | NodeagentStpCstConfigGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.8.1 | ScalaragentStpCstHelloTime | read-only | current | The MSTP root port hello time for the CIST. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.8.2 | ScalaragentStpCstMaxAge | read-only | current | The MSTP root port max age for the CIST. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.8.3 | ScalaragentStpCstRegionalRootId | read-only | current | The MSTP regional root identifier for the CIST. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.8.4 | ScalaragentStpCstRegionalRootPathCost | read-only | current | The MSTP regional root path cost for the CIST. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.8.5 | ScalaragentStpCstRootFwdDelay | read-only | current | The MSTP root port forward delay for the CIST. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.8.6 | ScalaragentStpCstBridgeFwdDelay | read-write | current | The MSTP bridge forward delay for the CIST. The default value is 15. This value must be >= ((MSTP root port max age/2) + 1). |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.8.7 | ScalaragentStpCstBridgeHelloTime | read-only | current | The MSTP bridge hello time for the CIST. The default value is 2.According to IEEE 802.1Q-REV 2005 updating hello time is disallowed |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.8.8 | ScalaragentStpCstBridgeHoldTime | read-only | current | The MSTP bridge hold time for the CIST. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.8.9 | ScalaragentStpCstBridgeMaxAge | read-write | current | The MSTP bridge max age for the CIST. The default value is 20. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.8.10 | ScalaragentStpCstBridgeMaxHops | read-write | current | The MSTP bridge max hops for the CIST. The default value is 20. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.8.11 | ScalaragentStpCstBridgePriority | read-write | current | The MSTP bridge priority for the CIST. The default value is 32768. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.8.12 | ScalaragentStpCstBridgeHoldCount | read-write | current | The MSTP bridge hold count for the CIST. This command sets the value of maximum bpdus that a bridge is allowed to send within a hello time window. The default … |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.9 | TableagentStpCstPortTable | not-accessible | current | CIST port table. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.9.1 | RowagentStpCstPortEntry | not-accessible | current | CIST port entry. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.9.1.1 | ColumnagentStpCstPortOperEdge | read-only | current | The MSTP operational status of a specific port for the CIST. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.9.1.2 | ColumnagentStpCstPortOperPointToPoint | read-only | current | The MSTP operational point to point mac of a specific port for the CIST. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.9.1.3 | ColumnagentStpCstPortTopologyChangeAck | read-only | current | The MSTP topology change acknowledge for a specific port in the CIST. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.9.1.4 | ColumnagentStpCstPortEdge | read-write | current | The administrative state of a specific port in CIST. enable(1) - enables the port. disable(2) - disables the port. The default port state is disabled. For the … |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.9.1.5 | ColumnagentStpCstPortForwardingState | read-only | current | The MSTP forwarding state of a specific port in CIST. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.9.1.6 | ColumnagentStpCstPortId | read-only | current | The MSTP port identifier of a specific port in CIST. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.9.1.7 | ColumnagentStpCstPortPathCost | read-write | current | The MSTP port path cost in CIST. The default value will correspond to the recommendation specified in IEEE 802.1s Table 13-2 which varies depending upon link s… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.9.1.8 | ColumnagentStpCstPortPriority | read-write | current | The MSTP port priority in CIST. The priority is in the increments of 16. The default value is 128. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.9.1.9 | ColumnagentStpCstDesignatedBridgeId | read-only | current | The MSTP designated bridge ID of a specific port in CIST. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.9.1.10 | ColumnagentStpCstDesignatedCost | read-only | current | The MSTP designated cost of a specific port in CIST. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.9.1.11 | ColumnagentStpCstDesignatedPortId | read-only | current | The MSTP designated port ID of a specific port in CIST. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.9.1.12 | ColumnagentStpCstExtPortPathCost | read-write | current | The MSTP external port path cost in CIST. The default value varies depending upon the link speed. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.9.1.13 | ColumnagentStpCstPortBpduGuardEffect | read-only | current | BPDU Guard Mode effect on the port. enable(1) - BPDU Guard Mode is enabled on the port. disable(2) - BPDU Guard Mode is disabled on the port. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.9.1.14 | ColumnagentStpCstPortBpduFilter | read-write | current | This command sets BPDU Filter mode on the port. enable(1) - BPDU Filter Mode is enabled on the port. disable(2) - BPDU Filter Mode is disabled on the port. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.9.1.15 | ColumnagentStpCstPortBpduFlood | read-write | current | This command sets BPDU Flood mode on the port. enable(1) - BPDU Flood Mode is enabled on the port. disable(2) - BPDU Flood Mode is disabled on the port. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.9.1.16 | ColumnagentStpCstPortAutoEdge | read-write | current | This command sets the auto-edge mode of the port which enables it to become an edge port if it does not see BPDUs for some duration. enable(1) - enables the au… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.9.1.17 | ColumnagentStpCstPortRootGuard | read-write | current | This command sets a port to discard any superior information received by the port and thus protect against root of the device from changing.The port gets put i… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.9.1.18 | ColumnagentStpCstPortTCNGuard | read-write | current | This command restricts the port from propagating any topology change information received through that port. enable(1) - enables the tcn-guard mode for the por… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.9.1.19 | ColumnagentStpCstPortLoopGuard | read-write | current | This command enables loop guard on this port. This setting applies to all Spanning Tree instances of which this port is a member. enable(1) - enables the loop … |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.10 | TableagentStpMstTable | not-accessible | current | MST table. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.10.1 | RowagentStpMstEntry | not-accessible | current | MST entry. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.10.1.1 | ColumnagentStpMstId | read-only | current | The MSTP instance ID. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.10.1.2 | ColumnagentStpMstBridgePriority | read-write | current | The MSTP bridge priority in a specific instance. The priority is in the increments of 4096. The recommended default value is 32768. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.10.1.3 | ColumnagentStpMstBridgeIdentifier | read-only | current | The MSTP bridge identifier in a specific instance. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.10.1.4 | ColumnagentStpMstDesignatedRootId | read-only | current | The MSTP designated root bridge identifier in a specific instance. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.10.1.5 | ColumnagentStpMstRootPathCost | read-only | current | The MSTP root path cost in a specific instance. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.10.1.6 | ColumnagentStpMstRootPortId | read-only | current | The MSTP root port ID in a specific instance. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.10.1.7 | ColumnagentStpMstTimeSinceTopologyChange | read-only | current | The MSTP time since the last topology change in a specific instance. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.10.1.8 | ColumnagentStpMstTopologyChangeCount | read-only | current | The MSTP count of topology changes in a specific instance. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.10.1.9 | ColumnagentStpMstTopologyChangeParm | read-only | current | The MSTP topology change parameter in a specific instance. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.10.1.10 | ColumnagentStpMstRowStatus | read-create | current | The MSTP instance status. Supported values: active(1) - valid instance. createAndGo(4) - used to create a new instance. destroy(6) - removes an instance. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.11 | TableagentStpMstPortTable | not-accessible | current | MST port table. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.11.1 | RowagentStpMstPortEntry | not-accessible | current | MST port entry. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.11.1.1 | ColumnagentStpMstPortForwardingState | read-only | current | The MSTP forwarding state of a specific port in a specific instance. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.11.1.2 | ColumnagentStpMstPortId | read-only | current | The MSTP port identifier of a specific port in a specific instance. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.11.1.3 | ColumnagentStpMstPortPathCost | read-write | current | The MSTP port path cost in a specific instance. The default value will correspond to the recommendation specified in IEEE 802.1s Table 13-2 which varies depend… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.11.1.4 | ColumnagentStpMstPortPriority | read-write | current | The MSTP port priority in a specific instance. The priority is in the increments of 16. The default value is 128. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.11.1.5 | ColumnagentStpMstDesignatedBridgeId | read-only | current | The MSTP designated bridge ID of a specific port in a specific instance. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.11.1.6 | ColumnagentStpMstDesignatedCost | read-only | current | The MSTP designated cost of a specific port in a specific instance. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.11.1.7 | ColumnagentStpMstDesignatedPortId | read-only | current | The MSTP designated port ID of a specific port in a specific instance. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.11.1.8 | ColumnagentStpMstPortLoopInconsistentState | read-only | current | The loop inconsistent state of a specific port in a specific instance. This value can only report as true(1) when loop guard is enabled on the port and the por… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.11.1.9 | ColumnagentStpMstPortTransitionsIntoLoopInconsistentState | read-only | current | The number of times this interface has transitioned into loop inconsistent state. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.11.1.10 | ColumnagentStpMstPortTransitionsOutOfLoopInconsistentState | read-only | current | The number of times this interface has transitioned out of loop inconsistent state. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.12 | TableagentStpMstVlanTable | not-accessible | current | MST VLAN table. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.12.1 | RowagentStpMstVlanEntry | not-accessible | current | MST VLAN entry. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.12.1.1 | ColumnagentStpMstVlanRowStatus | read-create | current | The association status of an MSTP instance and a VLAN. Supported values: active(1) - valid association between an MSTP instance and a VLAN. createAndGo(4) - us… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.13 | ScalaragentStpBpduGuardMode | read-write | current | The spanning tree BPDU Guard Mode. enable(1) - enables BPDU Guard Mode on the switch. disable(2) - disables BPDU Guard Mode on the switch. The default status i… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.14 | ScalaragentStpBpduFilterDefault | read-write | current | The spanning tree BPDU Filter Mode, it enables BPDU Filter on all edge ports. enable(1) - enables BPDU Filter Mode on the switch. disable(2) - disables BPDU Fi… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.15 | NodeagentPvrstpSwitchConfigGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.15.1 | ScalaragentPvstpAdminMode | read-write | current | The per VLAN spanning tree operational status. enable(1) - enables PVSTP on the switch. disable(2) - disables PVSTP on the switch. The default status is disabl… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.15.2 | ScalaragentPvrstpAdminMode | read-write | current | The per VLAN rapid spanning tree operational status. enable(1) - enables PVRSTP on the switch. disable(2) - disables PVRSTP on the switch. The default status i… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.15.3 | ScalaragentPvrstpUplinkFast | read-write | current | Enables or disabled uplink fast feature when switch is in PVST mode. enable(1) - enables UPLINK FAST on the switch. disable(2) - disables UPLINK FAST on the sw… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.15.4 | ScalaragentPvrstpBackboneFast | read-write | current | Enables or disabled backbone fast feature when switch is in PVST mode. enable(1) - enables BACKBONE FAST on the switch. disable(2) - disables BACKBONE FAST on … |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.15.5 | TableagentPvrstpVlanTable | not-accessible | current | PVRSTP table containing PVRSTP per vlan entries. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.15.5.1 | RowagentPvrstpVlanEntry | not-accessible | current | PVRSTP vlan entry attributes. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.15.5.1.1 | ColumnagentPvrstpVlanTableIndex | not-accessible | current | Index to PVRSTP vlan entry in PVRSTP vlan table. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.15.5.1.2 | ColumnagentPvrstpVlanRootPriSec | read-write | current | The PVRSTP primary or secondary root for the VLAN instance. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.15.5.1.3 | ColumnagentPvrstpVlanHelloTime | read-write | current | The PVRSTP hello time for the VLAN instance. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.15.5.1.4 | ColumnagentPvrstpVlanFwdDelayTime | read-write | current | The PVRSTP forward delay for the VLAN instance. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.15.5.1.5 | ColumnagentPvrstpVlanMaxAgeTime | read-write | current | The PVRSTP max age for the VLAN instance. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.15.6 | TableagentPvrstpPortVlanTable | not-accessible | current | PVRSTP table containing PVRSTP per port per vlan entries. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.15.6.1 | RowagentPvrstpPortVlanEntry | not-accessible | current | PVRSTP port entry per vlan attributes. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.15.6.1.1 | ColumnagentPvrstpPortIndex | not-accessible | current | Port index to PVRSTP port entry in PVRSTP port vlan table. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.15.6.1.2 | ColumnagentPvrstpVlanIndex | not-accessible | current | Vlan index to PVRSTP port entry in PVRSTP port vlan table. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.15.6.1.3 | ColumnagentPvrstpPortVlanPriority | read-write | current | PVRSTP port vlan priority is in the range of 0 to 240. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.16 | NodeagentAuthenticationGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.16.1 | ScalaragentAuthenticationListCreate | read-write | current | Authentication List Create If set to a non empty string, creates a new Authentication List for configuration. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.16.2 | TableagentAuthenticationListTable | not-accessible | current | Authentication List table. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.16.2.1 | RowagentAuthenticationListEntry | not-accessible | current | Authentication List entry. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.16.2.1.1 | ColumnagentAuthenticationListIndex | not-accessible | current | Authentication List Index Unique number used for indexing into this table. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.16.2.1.2 | ColumnagentAuthenticationListName | read-only | current | Authentication List Name Unique name used to identify the Authentication List from other tables. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.16.2.1.3 | ColumnagentAuthenticationListMethod1 | read-write | current | Authentication List Method 1 Configures the first authentication method to use when this list is specified. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.16.2.1.4 | ColumnagentAuthenticationListMethod2 | read-write | current | Authentication List Method 2 Configures the second authentication method to use when this list is specified. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.16.2.1.5 | ColumnagentAuthenticationListMethod3 | read-write | current | Authentication List Method 3 Configures the third authentication method to use when this list is specified. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.16.2.1.6 | ColumnagentAuthenticationListStatus | read-write | current | The status of the Authentication List. Supported values: active(1) - indicates a valid Authenticaiton List destroy(6) - removes the Authentication List. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.16.2.1.7 | ColumnagentAuthenticationListMethod4 | read-write | current | Authentication List Method 4 Configures the fourth authentication method to use when this list is specified. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.16.2.1.8 | ColumnagentAuthenticationListMethod5 | read-write | current | Authentication List Method 5 Configures the fifth authentication method to use when this list is specified. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.16.3 | ScalaragentUserConfigDefaultAuthenticationList | read-write | current | Default Authentication List This object configures which authentication list to use for users which do not have an Authentication List configured. The list mus… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.16.4 | TableagentUserAuthenticationConfigTable | not-accessible | current | User Authentication Config Table |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.16.4.1 | RowagentUserAuthenticationConfigEntry | not-accessible | current | User Authentication Config Entry |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.16.4.1.1 | ColumnagentUserAuthenticationList | read-write | current | User Authentication List This object configures which authentication list to use for this user. The list must be configured before setting. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.16.5 | TableagentUserPortConfigTable | not-accessible | current | User Port Config Table |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.16.5.1 | RowagentUserPortConfigEntry | not-accessible | current | User Port Config Entry |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.16.5.1.1 | ColumnagentUserPortSecurity | read-write | current | User Port Port Security This object configures which ports the user has access to. Ports are indexed based on dot1dBasePort entries in dot1dBasePortTable. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.17 | NodeagentClassOfServiceGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.17.1 | TableagentClassOfServicePortTable | not-accessible | current | A table that contains information about the 802.1p priority mapping to traffic class priority queue for every physical port. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.17.1.1 | RowagentClassOfServicePortEntry | not-accessible | current | A 802.1p priority mapped to a traffic class priority queue. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.17.1.1.1 | ColumnagentClassOfServicePortPriority | not-accessible | current | The Priority value determined for the received frame. This value is equivalent to the priority indicated in the tagged frame received, or one of the evaluated … |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.17.1.1.2 | ColumnagentClassOfServicePortClass | read-write | current | Traffic class priority queue the received frame is mapped to. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.18 | NodeagentLinkDependencyGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.18.1 | TableagentLinkDependencyGroupTable | not-accessible | current | A table for link dependencies entries. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.18.1.1 | RowagentLinkDependencyGroupEntry | not-accessible | current | Link Dependency Group Entry. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.18.1.1.1 | ColumnagentLinkDependencyGroupId | not-accessible | current | Group identifier of the Link Dependency entry. Maximum of 16 group entries exists on the switch but they are not configured on the switch. Groups are configure… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.18.1.1.2 | ColumnagentLinkDependencyGroupStatus | read-write | current | The status of this entry. active(1) - the group has a valid configuration notReady(3) - the group has an incomplete configuration destroy(6) - remove the group… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.18.1.1.3 | ColumnagentLinkDependencyGroupMemberPortMask | read-create | current | Member Port Mask. This mask defines the member ports of this group. To obtain port numbers from interface numbers, use the objects agentPortDot1dBasePort and a… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.18.1.1.4 | ColumnagentLinkDependencyGroupDependsOnPortMask | read-create | current | Depended Upon Port Mask. This mask defines the ports upon which the members of this group depend. To obtain port numbers from interface numbers, use the object… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.18.1.1.5 | ColumnagentLinkDependencyGroupAction | read-write | current | Group action refers to action taken by the dependent ports when the member ports go down. LINK-DOWN(0) members go down when dependent link goes down, LINK-UP(1… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.20 | NodeagentOperationalModeGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.20.1 | ScalaragentOperationalModeSimple | read-write | current | This defines the Operational mode for the switch: Simple/Normal. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.21 | NodeagentHTTPConfigGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.21.1 | ScalaragentHTTPWebMode | read-write | current | Configures the HTTP server admin mode |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.21.2 | ScalaragentHTTPJavaMode | read-write | obsolete | Configures the use of the Java interface through Web connections. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.22 | NodeagentAutoInstallConfigGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.22.1 | ScalaragentAutoinstallMode | read-write | current | Enable/Disable Autoinstall persistent mode on device. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.22.2 | ScalaragentAutoinstallAutosaveMode | read-write | current | Enable/Disable Auto Save of downloaded configuration on device. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.22.3 | ScalaragentAutoinstallUnicastRetryCount | read-write | current | Sets number of unicast TFTP attempts for configuration file. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.22.4 | ScalaragentAutoinstallStatus | read-only | current | Display current Autoinstall status on device. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.22.5 | ScalaragentAutoinstallAutoRebootMode | read-write | current | Enable/Disable Auto Reboot after succesfull image update on device. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.22.6 | ScalaragentAutoinstallOperationalMode | read-write | current | Enable/Disable Autoinstall operational mode on device. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.23 | NodeagentVlanSwitchportTrunkModeGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.23.1 | TableagentVlanSwitchportTrunkModeTable | not-accessible | current | A table containing static configuration information for each VLAN configured for Switcgport Trunk mode. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.23.1.1 | RowagentVlanSwitchportTrunkModeEntry | not-accessible | current | SwitchPort Trunk Mode Membership. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.23.1.1.1 | ColumnagentVlanSwitchportTrunkStaticEgressPorts | read-write | current | This field contains all the ports which include the VLAN for Trunk mode. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.23.1.1.2 | ColumnagentVlanSwitchportTrunkForbiddenPorts | read-write | current | This field contains all the ports which include the VLAN for Trunk mode. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.24 | NodeagentDDisableAutorecoveryConfigGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.24.1 | ScalaragentDDisableAutorecoveryStatus | read-write | current | Enable/Disable the D-Disable Autorecovery feature for all causes. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.24.2 | ScalaragentDDisableAutorecoveryTimeout | read-write | current | Timeout to autorecovery from D-Disable port state. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.24.3 | ScalaragentDDisableAutorecoveryCause | read-write | current | Enable/Disable the D-Disable Autorecovery feature for a particular cause. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.25 | NodeagentExecAccountingGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.25.1 | ScalaragentExecAccountingListCreate | read-write | current | ExecAccounting List Create if set to a non empty string, creates a new ExecAccounting List for configuration. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.25.2 | TableagentExecAccountingListTable | not-accessible | current | ExecAccounting Method List table. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.25.2.1 | RowagentExecAccountingListEntry | not-accessible | current | ExecAccounting Method List Entry. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.25.2.1.1 | ColumnagentExecAccountingListIndex | not-accessible | current | ExecAccounting List Index Unique number used for indexing into this table. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.25.2.1.2 | ColumnagentExecAccountingListName | read-only | current | Unique name used to identify the ExecAccounting List from other tables. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.25.2.1.3 | ColumnagentExecAccountingMethodType | read-write | current | ExecAccounting Method Type Configures the method type to use when this ExecAccounting list is specified. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.25.2.1.4 | ColumnagentExecAccountingListMethod1 | read-write | current | ExecAccounting List Method 1 Configures the authentication method to use when this list is specified. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.25.2.1.5 | ColumnagentExecAccountingListMethod2 | read-write | current | ExecAccounting List Method 2 Configures the authentication method to use when this list is specified. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.25.2.1.6 | ColumnagentExecAccountingListStatus | read-write | current | The status of the ExecAccounting List. Supported values: active(1) - indicates a valid ExecAccounting List destroy(6) - removes the ExecAccounting List. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.26 | NodeagentCmdsAccountingGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.26.1 | ScalaragentCmdsAccountingListCreate | read-write | current | CmdsAccounting List Create if set to a non empty string, creates a new CmdsAccounting List for configuration. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.26.2 | TableagentCmdsAccountingListTable | not-accessible | current | CmdsAccounting Method List table. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.26.2.1 | RowagentCmdsAccountingListEntry | not-accessible | current | CmdsAccounting Method List Entry. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.26.2.1.1 | ColumnagentCmdsAccountingListIndex | not-accessible | current | CmdsAccounting List Index Unique number used for indexing into this table. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.26.2.1.2 | ColumnagentCmdsAccountingListName | read-only | current | Unique name used to identify the CmdsAccounting List from other tables. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.26.2.1.3 | ColumnagentCmdsAccountingMethodType | read-write | current | CmdsAccounting Method Type Configures the method type to use when this CmdsAccounting list is specified. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.26.2.1.4 | ColumnagentCmdsAccountingListMethod1 | read-write | current | CmdsAccounting List Method 1 Configures the authentication method to use when this list is specified. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.26.2.1.5 | ColumnagentCmdsAccountingListStatus | read-write | current | The status of the CmdsAccounting List. Supported values: active(1) - indicates a valid CmdsAccounting List destroy(6) - removes the CmdsAccounting List. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.27 | NodeagentCmdsAuthorizationGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.27.1 | ScalaragentCmdsAuthorizationListCreate | read-write | current | Command Authorization List Create. If set to a non empty string, creates a new Command Authorization List for configuration. List name must contain Alphanumeri… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.27.2 | TableagentCmdsAuthorizationListTable | not-accessible | current | Command Authorization Method List table. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.27.2.1 | RowagentCmdsAuthorizationListEntry | not-accessible | current | Command Authorization Method List Entry. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.27.2.1.1 | ColumnagentCmdsAuthorizationListIndex | not-accessible | current | Command Authorization List Index Unique number used for indexing into this table. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.27.2.1.2 | ColumnagentCmdsAuthorizationListName | read-only | current | Command Authorization List Name Unique name used to identify the Command Authorization List from other tables. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.27.2.1.3 | ColumnagentCmdsAuthorizationListStatus | read-write | current | The status of the CmdsAuthorization List. Supported values: active(1) - indicates a valid CmdsAuthorization List destroy(6) - removes the CmdsAuthorization Lis… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.27.2.1.4 | ColumnagentCmdsAuthorizationListMethod1 | read-write | current | Command Authorization List Method1 Configures the Command Authorization method to use when this list is specified. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.27.2.1.5 | ColumnagentCmdsAuthorizationListMethod2 | read-write | current | Command Authorization List Method2 Configures the Command Authorization method to use when this list is specified. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.28 | NodeagentExecAuthorizationGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.28.1 | ScalaragentExecAuthorizationListCreate | read-write | current | Exec Authorization List Create. If set to a non empty string, creates a new Exec Authorization List for configuration. List name must contain Alphanumeric char… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.28.2 | TableagentExecAuthorizationListTable | not-accessible | current | Exec Authorization Method List table. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.28.2.1 | RowagentExecAuthorizationListEntry | not-accessible | current | Exec Authorization Method List Entry. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.28.2.1.1 | ColumnagentExecAuthorizationListIndex | not-accessible | current | Exec Authorization List Index Unique number used for indexing into this table. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.28.2.1.2 | ColumnagentExecAuthorizationListName | read-only | current | Exec Authorization List Name Unique name used to identify the Exec Authorization List from other tables. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.28.2.1.3 | ColumnagentExecAuthorizationListStatus | read-write | current | The status of the ExecAuthorization List. Supported values: active(1) - indicates a valid ExecAuthorization List destroy(6) - removes the ExecAuthorization Lis… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.28.2.1.4 | ColumnagentExecAuthorizationListMethod1 | read-write | current | Exec Authorization List Method1 Configures the Exec Authorization method to use when this list is specified. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.28.2.1.5 | ColumnagentExecAuthorizationListMethod2 | read-write | current | Exec Authorization List Method2 Configures the Exec Authorization method to use when this list is specified. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.28.2.1.6 | ColumnagentExecAuthorizationListMethod3 | read-write | current | Exec Authorization List Method3 Configures the Exec Authorization method to use when this list is specified. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.28.2.1.7 | ColumnagentExecAuthorizationListMethod4 | read-write | current | Exec Authorization List Method4 Configures the Exec Authorization method to use when this list is specified. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.29 | NodeagentSwitchMbufConfigGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.29.1 | ScalaragentSwitchMbufRisingThreshold | read-write | current | The Mbuf utilization rising threshold in percentage. A single notification (rising event) is generated when the total Mbuf utilization exceeds this threshold. … |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.29.2 | ScalaragentSwitchMbufFallingThreshold | read-write | current | The Mbuf utilization falling threshold in percentage. A single notification (falling event) is generated when the total Mbuf utilization falls below this thres… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.29.3 | ScalaragentSwitchMbufNotificationSeverity | read-write | current | Severity level while notification is generated for rising and falling threshold. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.30 | NodeagentDynamicAuthorizationGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.30.1 | ScalaragentDynamicAuthorizationMode | read-write | current | Configures the Dynamic Authorization mode which must be enabled to support CoA functionality. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.30.2 | ScalaragentDynamicAuthorizationServerKey | read-write | current | Configures a global shared secret that is used for all dynamic authorization clients that do not have an individual shared secret key configured. If agentDynam… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.30.3 | ScalaragentDynamicAuthorizationEncryptServerKey | read-write | current | Specifies whether the global shared secret configured is to be encrypted or not. Set this in conjnction with agentDynamicAuthorizationServerKey. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.30.4 | ScalaragentDynamicAuthorizationPortNum | read-write | current | Configures UDP port on which a device listens for RADIUS requests from configured RADIUS clients. The default port number is 3799. The supported range for the … |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.30.5 | ScalaragentDynamicAuthorizationType | read-write | current | Configures the type of authorization that the device must use for RADIUS clients. The client must match the configured attributes for authorization. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.30.6 | ScalaragentDynamicAuthorizationIgnoreSessionKey | read-write | current | Specifies whether the session-key is to be ignored or not. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.30.7 | ScalaragentDynamicAuthorizationIgnoreServerKey | read-write | current | Specifies whether the server-key is to be ignored or not. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.30.8 | TableagentDynamicAuthorizationClientTable | not-accessible | current | A table of the Dynamic Authorization Client entries |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.30.8.1 | RowagentDynamicAuthorizationClientEntry | not-accessible | current | Represents entry for a set of Dynamic Authorization Clients |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.30.8.1.1 | ColumnagentDynamicAuthorizationClientAddress | not-accessible | current | Configures a Dynamic Authorization Client IP Address or Hostname. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.30.8.1.2 | ColumnagentDynamicAuthorizationClientServerKey | read-create | current | Configures a Dynamic Authorization Client Server Key. If agentDynamicAuthorizationClientEncryptServerKey is set to true, then the length of this string has to … |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.30.8.1.3 | ColumnagentDynamicAuthorizationClientEncryptServerKey | read-create | current | Specifies whether the client server-key configured is to be encrypted or not.Set this in conjunction with agentDynamicAuthorizationClientServerKey. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.30.8.1.4 | ColumnagentDynamicAuthorizationClientRowStatus | read-create | current | The status of this conceptual row. active(1) - this client is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.30.9 | ScalaragentDynamicAuthorizationStatsClear | read-write | current | When set to enable(1), all dynamic authorization global statistics will be reset. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.30.10 | ScalaragentDynamicAuthorizationIgnoreBouncePortCommand | read-write | current | Specifies whether the CoA bounce port request will be ignored or not. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.30.11 | ScalaragentDynamicAuthorizationIgnoreDisablePortCommand | read-write | current | Specifies whether the CoA disable port request will be ignored or not. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.30.12 | ScalaragentDasAllClientStatsClear | read-write | current | When set to enable(1), all dynamic authorization per client statistics will be reset. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.30.13 | TableagentDasClientStatsTable | not-accessible | current | Table to display Coa statistics of DAS client. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.30.13.1 | RowagentDasClientStatsEntry | not-accessible | current | Entry consisting Coa statistics of DAS client . |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.30.13.1.1 | ColumnagentDasClientRequestsReceived | read-only | current | Number of dynamic authorization requests received. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.30.13.1.2 | ColumnagentDasClientACKResponsesSent | read-only | current | Number of dynamic authorization ACK responses sent. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.30.13.1.3 | ColumnagentDasClientNAKResponsesSent | read-only | current | Number of dynamic authorization NAK responses sent. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.30.13.1.4 | ColumnagentDasClientRequestsIgnored | read-only | current | Number of dynamic authorization requests ignored. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.30.13.1.5 | ColumnagentDasClientRequestsWithMissingOrUnsupportedAttribute | read-only | current | Number of dynamic authorization requests received with missing or unsupported attribute. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.30.13.1.6 | ColumnagentDasClientRequestsWithSessionContextNotFound | read-only | current | Number of dynamic authorization requests received with session context not found. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.30.13.1.7 | ColumnagentDasClientRequestsWithInvalidAttributeValue | read-only | current | Number of dynamic authorization requests received with invalid attribute value. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.30.13.1.8 | ColumnagentDasClientRequestsAdministrativelyProhibited | read-only | current | Number of dynamic authorization requests administratively prohibited. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.30.14 | TableagentDasClientStatsClearTable | not-accessible | current | To Clear dynamic authorization statistics. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.30.14.1 | RowagentDasClientStatsClearEntry | not-accessible | current | Entry to clear per client stats. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.30.14.1.1 | ColumnagentDasClientStatsClear | read-write | current | When set to enable(1), dynamic authorization statistics for the requested client will be reset. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.31 | TableagentKeepalivePortTable | not-accessible | current | Keepalive port table. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.31.1 | RowagentKeepalivePortEntry | not-accessible | current | Keep alive port table. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.31.1.1 | ColumnagentKeepalivePortState | read-write | current | The keepalive state for the port. enable(1) - enables keepalive on the port. disable(2) - disables keepalive on the port. The default port keepalive state is e… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.31.1.2 | ColumnagentKeepalivePortLoopDetected | read-only | current | Keepalive status for the port. yes (1) - loop detected on the port. no (2) - no loop detected on the port. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.31.1.3 | ColumnagentKeepalivePortLoopCount | read-only | current | The loop count on a specific port. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.31.1.4 | ColumnagentKeepalivePortTimeSinceLastLoop | read-only | obsolete | Time since last loop detected on the port. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.31.1.5 | ColumnagentKeepalivePortRxAction | read-write | current | Action on detecting a loop on the port. log-msg (1) - log a message. log-shutdown (2) - log message and shutdown the port. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.31.1.6 | ColumnagentKeepalivePortStatus | read-only | current | Port status. enable (1) - port is enabled. disable (2) - port is disabled. diag-disable (3) - port is diagnostic disabled. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.31.1.7 | ColumnagentKeepalivePortLastLoopDetectedTime | read-only | current | TimeStamp when last loop was detected on a port. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.3 | NodeagentSystemGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.3.1 | ScalaragentSaveConfig | read-write | current | enable(1) will initiate an configuration save to nvram. Status is returned by the object agentSaveConfigStatus. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.3.2 | ScalaragentClearConfig | read-write | current | clear config to factory defaults |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.3.3 | ScalaragentClearLags | read-write | current | clear lag configuration |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.3.4 | ScalaragentClearLoginSessions | read-write | current | close all telnet sessions |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.3.5 | ScalaragentClearPasswords | read-write | current | reset passwords |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.3.6 | ScalaragentClearPortStats | read-write | current | clear all port statistics |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.3.7 | ScalaragentClearSwitchStats | read-write | current | clear all switch statistics |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.3.8 | ScalaragentClearTrapLog | read-write | current | clear trap log |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.3.9 | ScalaragentClearVlan | read-write | current | clear vlan entries |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.3.10 | ScalaragentResetSystem | read-write | current | Resets the switch. This object is not valid for stacking platforms. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.3.11 | ScalaragentSaveConfigStatus | read-only | current | Indicates the current status of an save configuration request. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.3.12 | ScalaragentStartupConfigErase | read-write | current | Erase the text-based configuration file stored in non-volatile memory.On read returns 0. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.3.14 | ScalaragentReloadConfig | read-write | current | Reloads the text-based configuration file named startup-config stored in non-volatile memory.On read returns 0. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.3.15 | ScalaragentClearMbufStats | read-write | current | Clear Mbuf statistics. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.4 | NodeagentCableTesterGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.4.1 | ScalaragentCableTesterStatus | read-write | current | Status of the Virtual Cable Tester active(1) - cable testing is in progress. Set to this value to start the test. success(2) - A successful test was performed.… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.4.2 | ScalaragentCableTesterIfIndex | read-write | current | Determines on which port to perform the cable test. Limited to copper based ports. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.4.3 | ScalaragentCableTesterCableStatus | read-only | current | Indicates the results of the Cable Test. normal(1) - The cable is working correctly. open(2) - The cable is disconnected or there is a faulty connector. short(… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.4.4 | ScalaragentCableTesterMinimumCableLength | read-only | current | The estimated length of the cable in meters. This value indicates the shortest length estimated. This object will return 0 if agentCableTesterStatus is not suc… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.4.5 | ScalaragentCableTesterMaximumCableLength | read-only | current | The estimated length of the cable in meters. This value indicates the longest length estimated. This object will return 0 if agentCableTesterStatus is not succ… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.4.6 | ScalaragentCableTesterCableFailureLocation | read-only | current | The estimated distance in meters from the end of the cable to the failure location. This object will return 0 if agentCableTesterStatus is not success(2). |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Ipv6Address | OCTET STRING (SIZE (16)) | current | This data type is used to model IPv6 addresses. This is a binary string of 16 octets in network byte-order. |
| Ipv6AddressIfIdentifier | OCTET STRING (SIZE (0..8)) | current | This data type is used to model IPv6 address interface identifiers. This is a binary string of up to 8 octets in network byte-order. |
| Ipv6AddressPrefix | OCTET STRING (SIZE (0..16)) | current | This data type is used to model IPv6 address prefixes. This is a binary string of up to 16 octets in network byte-order. |
| Ipv6IfIndex | Integer32 (1..2147483647) | current | A unique value, greater than zero for each internetwork-layer interface in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each internetwork-layer interface mus… |
| Ipv6IfIndexOrZero | Integer32 (0..2147483647) | current | This textual convention is an extension of the Ipv6IfIndex convention. The latter defines a greater than zero value used to identify an IPv6 interface in the managed system. This extension permits the additional value o… |
| PortId | OCTET STRING (SIZE (2)) | current | This data type is used to model port ids. This is a binary string of 2 octets. |
| ProtectedPortList | OCTET STRING (SIZE (0..198)) | current | Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents… |
| VlanList | OCTET STRING (SIZE (0..512)) | current | Each octet within this value specifies a set of eight vlans, with the first octet specifying vlans 1 through 8, the second octet specifying vlans 9 through 16, etc. Within each octet, the most significant bit represents… |