DNOS-VPC-MIB
91 objects
The MIB definitions VPC Feature.
Imported Objects
| DELL-REF-MIB | AgentPortMask dnOS |
| IF-MIB | InterfaceIndex |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | MacAddress RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200 | IdentityfastPathVpc | The MIB definitions VPC Feature. | ||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1 | NodeagentVpcConfigGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.1 | ScalaragentVpcMode | read-write | current | To enable VPC globally. The VPC role election happens if both the VPC feature is enabled and if the keepalive state machine is enabled. The following options a… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.2 | ScalaragentKeepalivePriority | read-write | obsolete | To configure the priority of the VPC switch. This value is used for the VPC role election. Configurable range is 1 to 255. The default value is 100. Note: The … |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.3 | ScalaragentKeepaliveTimeout | read-write | obsolete | To configure the peer keepalive timeout value (in seconds). If an VPC switch does not receive keepalive messages from the peer for this timeout value, it takes… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.4 | ScalaragentKeepaliveMode | read-write | obsolete | To start/stop the keepalive state machine on the VPC device, if VPC is globally enabled. The following options are supported: enable - Enable keepalive disable… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.5 | ScalaragentPeerLink | read-write | current | To configures a port channel as the VPC peer link. The configurable range is a valid port channel interface index. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.6 | ScalaragentPeerDetectionMode | read-write | obsolete | To start/stop the dual control plane detection protocol (DCPDP) on the VPC switch. The following options are supported: enable - Enable the DCPDP on VPC switch… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.7 | TableagentVpcConfigTable | not-accessible | obsolete | VPC config table. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.7.1 | RowagentVpcConfigEntry | not-accessible | obsolete | VPC config entry. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.7.1.1 | ColumnagentVpcConfigId | read-only | obsolete | VPC Id. This object is obselete. Refer to agentVpcDomainIndex for configuring VPC Id. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.7.1.2 | ColumnagentVpcTrackPortMask | read-write | obsolete | Tracking of non-mlag links. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.8 | TableagentPeerConfigTable | not-accessible | obsolete | VPC config table. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.8.1 | RowagentPeerConfigEntry | not-accessible | obsolete | VPC config entry. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.8.1.1 | ColumnagentPeerConfigRowIndex | not-accessible | obsolete | Index. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.8.1.2 | ColumnagentPeerIpAddr | read-write | obsolete | To configure IP address of the peer VPC switch. This configuration is used by the dual control plane detection protocol (DCPDP) on the VPC switches. NOTE: In o… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.8.1.3 | ColumnagentSourceIpAddr | read-write | obsolete | To configure Self IP address of the VPC switch that is used as the source IP by the dual control plane detection protocol (DCPDP) on the VPC switches. NOTE: In… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.8.1.4 | ColumnagentDcpdpUdpPort | read-write | obsolete | To configure the UDP port on which the VPC switch listens to the DCPDP messages. Configurable range is 1 to 65535. Default value is 50000. NOTE: In order to se… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.8.1.5 | ColumnagentPeerRowStatus | read-create | obsolete | Peer config status. Supported values: active(1) - valid instance. createAndGo(4) - used to configure peer configuration. destroy(6) - reset peer configuration. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.9 | TableagentVpcDomainConfigTable | not-accessible | current | VPC domain config table. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.9.1 | RowagentVpcDomainConfigEntry | not-accessible | current | VPC domain config entry. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.9.1.1 | ColumnagentVpcDomainIndex | read-write | current | VPC Domain ID. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.9.1.2 | ColumnagentVpcDomainKeepalivePriority | read-write | current | To configure the priority of the VPC switch. This value is used for the VPC role election. Configurable range is 1 to 255. The default value is 100. Note: The … |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.9.1.3 | ColumnagentVpcDomainKeepaliveTimeout | read-write | current | To configure the peer keepalive timeout value (in seconds). If an VPC switch does not receive keepalive messages from the peer for this timeout value, it takes… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.9.1.4 | ColumnagentVpcDomainKeepaliveMode | read-write | current | To start/stop the keepalive state machine on the VPC device, if VPC is globally enabled. The following options are supported: enable - Enable keepalive disable… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.9.1.5 | ColumnagentVpcDomainPeerDetectionMode | read-write | current | To start/stop the dual control plane detection protocol (DCPDP) on the VPC switch. The following options are supported: enable - Enable the DCPDP on VPC switch… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.9.1.6 | ColumnagentVpcDomainSystemMac | read-write | current | To configure the MAC address for the VPC domain. This mac-address is used in the LACP PDUs and STP BPDUs that are sent out on VPC member ports. For the VPC dom… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.9.1.7 | ColumnagentVpcDomainSystemPriority | read-write | current | To configure the system priority for the VPC domain. This is used in the LACP PDUs sent out on VPC member ports. System-priority should be configured same on b… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.9.1.8 | ColumnagentVpcDomainPeerDetectionInterval | read-write | current | To configure the DCPDP transmission interval. NOTE: In order to set value for the object, need to set values for DCPDP transmission interval and reception time… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.9.1.9 | ColumnagentVpcDomainPeerDetectionTimeout | read-write | current | To configure the DCPDP reception timeout. NOTE: In order to set value for the object, need to set values for DCPDP transmission interval and reception timeout … |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.9.1.10 | ColumnagentVpcDomainPeerIpAddr | read-write | current | To configure IP address of the peer VPC switch. This configuration is used by the dual control plane detection protocol (DCPDP) on the VPC switches. NOTE: In o… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.9.1.11 | ColumnagentVpcDomainSourceIpAddr | read-write | current | To configure Self IP address of the VPC switch that is used as the source IP by the dual control plane detection protocol (DCPDP) on the VPC switches. NOTE: In… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.9.1.12 | ColumnagentVpcDomainDcpdpUdpPort | read-write | current | To configure the UDP port on which the VPC switch listens to the DCPDP messages. Configurable range is 1 to 65535. Default value is 50000. NOTE: In order to se… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.9.1.13 | ColumnagentVpcDomainStatus | read-create | current | Status of VPC Domain. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.2 | NodeagentVpcPeerKeepAliveStatsGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.2.1 | ScalaragentVpcPeerKeepAliveTotalTx | read-only | current | Total Packets transmitted |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.2.2 | ScalaragentVpcPeerKeepAliveSuccessTx | read-only | current | Successfully Transmitted Packets. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.2.3 | ScalaragentVpcPeerKeepAliveTxErrors | read-only | current | Transmit Failed Packets. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.2.4 | ScalaragentVpcPeerKeepAliveTotalRx | read-only | current | Total Packets Received. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.2.5 | ScalaragentVpcPeerKeepAliveSuccessRx | read-only | current | Successfully Received Packets. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.2.6 | ScalaragentVpcPeerKeepAliveRxErrors | read-only | current | Number of packets received with errors. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.2.7 | ScalaragentVpcPeerKeepAliveTimeoutCount | read-only | current | Timeout counter. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.3 | NodeagentVpcPeerLinkStatsGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.3.1 | ScalaragentVpcPeerLinkControlMsgTx | read-only | current | Peer link control messages transmitted. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.3.2 | ScalaragentVpcPeerLinkTxErrors | read-only | current | Peer link control messages Tx errors. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.3.3 | ScalaragentVpcPeerLinkTxTimeout | read-only | current | Peer link control messages Tx timeout. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.3.4 | ScalaragentVpcPeerLinkControlMsgAckTx | read-only | current | Peer link control messages ACK transmitted. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.3.5 | ScalaragentVpcPeerLinkControlMsgAckErrors | read-only | current | Peer link control messages ACK Tx errors. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.3.6 | ScalaragentVpcPeerLinkControlMsgRx | read-only | current | Peer link control messages received. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.3.7 | ScalaragentVpcPeerLinkDataMsgTx | read-only | current | Peer link data messages transmitted. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.3.8 | ScalaragentVpcPeerLinkDataMsgTxErrors | read-only | current | Peer link data messages Tx errors. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.3.9 | ScalaragentVpcPeerLinkDataMsgTxTimeout | read-only | current | Peer link data messages Tx timeout. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.3.10 | ScalaragentVpcPeerLinkDataMsgRx | read-only | current | Peer link data messages received. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.3.11 | ScalaragentVpcPeerLinkBPDUTx | read-only | current | Peer link BPDU's transmitted to peer. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.3.12 | ScalaragentVpcPeerLinkBPDUTxErrors | read-only | current | Peer link BPDU's Tx errors. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.3.13 | ScalaragentVpcPeerLinkBPDUrx | read-only | current | Peer link BPDU's received from peer. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.3.14 | ScalaragentVpcPeerLinkBPDURxErrors | read-only | current | Peer link BPDU's Rx errors. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.3.15 | ScalaragentVpcPeerLinkLACPDUTx | read-only | current | Peer link LACPDU's tranmsitted to peer. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.3.16 | ScalaragentVpcPeerLinkLACPDUTxErrors | read-only | current | Peer link LACPDU's Tx errors. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.3.17 | ScalaragentVpcPeerLinkLACPDUrx | read-only | current | Peer link LACPDU's received from peer. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.3.18 | ScalaragentVpcPeerLinkLACPDURxErrors | read-only | current | Peer link LACPDU's Rx errors. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.4 | NodeagentVpcStatusGroup | |||
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.4.1 | ScalaragentVpcPeerLinkStatus | read-only | current | Peer link operational status. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.4.2 | ScalaragentVpcTotalVpcConfigured | read-only | current | Number of VPC's configured. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.4.3 | ScalaragentVpcTotalVpcOperational | read-only | current | Number of VPC's operational. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.4.4 | ScalaragentVpcSelfRole | read-only | current | VPC role. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.4.5 | ScalaragentVpcOperationMode | read-only | current | VPC operational mode. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.4.6 | ScalaragentVpcPeerRole | read-only | current | Vpc peer role. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.4.7 | ScalaragentVpcKeepaliveOperationalMode | read-only | current | VPC keepalive operational mode. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.4.8 | ScalaragentVpcSystemMac | read-only | current | System MAC address. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.4.9 | ScalaragentVpcState | read-only | current | The following states of a VPC mean: DISABLE: In this state, the VPC interfaces, if any are shut down. LISTEN: The keepalive does not advertise any packets. REA… |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.4.10 | ScalaragentVpcPeerPriority | read-only | current | VPC peer priority. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.4.11 | ScalaragentVpcPeerMac | read-only | current | VPC peer MAC address. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.4.12 | ScalaragentVpcPeerDetectionStatus | read-only | current | VPC peer detection status. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.4.13 | ScalaragentVpcIsPeerDetected | read-only | current | Indicates if the VPC peer is detected. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.4.14 | TableagentVpcSelfMemberStatusTable | not-accessible | current | VPC self member ports status table. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.4.14.1 | RowagentVpcSelfMemberStatusEntry | not-accessible | current | VPC self member port status entry. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.4.14.1.1 | ColumnagentVpcSelfMemberStatusVpcId | read-only | current | VPC Id. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.4.14.1.2 | ColumnagentVpcSelfMemberStatusIntfId | read-only | current | Interface Id. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.4.14.1.3 | ColumnagentVpcSelfMemberStatusIntfState | read-only | current | VPC self member interface status. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.4.15 | TableagentVpcPeerMemberStatusTable | not-accessible | current | VPC peer member ports status table. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.4.15.1 | RowagentVpcPeerMemberStatusEntry | not-accessible | current | VPC peer member port status entry. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.4.15.1.1 | ColumnagentVpcPeerMemberStatusVpcId | read-only | current | VPC Id. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.4.15.1.2 | ColumnagentVpcPeerMemberStatusIntfId | read-only | current | Interface Id. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.4.15.1.3 | ColumnagentVpcPeerMemberStatusIntfState | read-only | current | VPC peer member interface status. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.4.16 | TableagentVpcStatusTable | not-accessible | current | VPC status table. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.4.16.1 | RowagentVpcStatusEntry | not-accessible | current | VPC status entry. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.4.16.1.1 | ColumnagentVpcStatusId | read-only | current | VPC Id. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.4.16.1.2 | ColumnagentVpcOperationalStatus | read-only | current | VPC operational status. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.4.16.1.3 | ColumnagentPortChannelId | read-only | current | Port-channel ID. |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.4.16.1.4 | ColumnagentVpcInterfaceState | read-only | current | The following states of a VPC port-channel interface mean: DISABLE: The state of a port-channel before VPC functionality is enabled on it. WAIT: The VPC port-c… |