DOCS-IETF-BPI2-MIB
196 objects
This is the MIB module for the DOCSIS Baseline Privacy Plus Interface (BPI+) at cable modems (CMs) and cable modem termination systems (CMTSs). Copyright (C) The Internet Society (2005). This version of this MIB module is part of RFC 4131; see the RFC itself for full legal notices.
Imported Objects
| IF-MIB | ifIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 mib-2 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime MacAddress RowStatus StorageType TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.126 | IdentitydocsBpi2MIB | This is the MIB module for the DOCSIS Baseline Privacy Plus Interface (BPI+) at cable modems (CMs) and cable modem termination systems (CMTSs). Copyright (C) T… | ||
| 1.3.6.1.2.1.126.0 | NodedocsBpi2Notification | |||
| 1.3.6.1.2.1.126.1 | NodedocsBpi2MIBObjects | |||
| 1.3.6.1.2.1.126.1.1 | NodedocsBpi2CmObjects | |||
| 1.3.6.1.2.1.126.1.1.1 | TabledocsBpi2CmBaseTable | not-accessible | current | This table describes the basic and authorization- related Baseline Privacy Plus attributes of each CM MAC interface. |
| 1.3.6.1.2.1.126.1.1.1.1 | RowdocsBpi2CmBaseEntry | not-accessible | current | Each entry contains objects describing attributes of one CM MAC interface. An entry in this table exists for each ifEntry with an ifType of docsCableMaclayer(1… |
| 1.3.6.1.2.1.126.1.1.1.1.1 | ColumndocsBpi2CmPrivacyEnable | read-only | current | This object identifies whether this CM is provisioned to run Baseline Privacy Plus. |
| 1.3.6.1.2.1.126.1.1.1.1.2 | ColumndocsBpi2CmPublicKey | read-only | current | The value of this object is a DER-encoded RSAPublicKey ASN.1 type string, as defined in the RSA Encryption Standard (PKCS #1), corresponding to the public key … |
| 1.3.6.1.2.1.126.1.1.1.1.3 | ColumndocsBpi2CmAuthState | read-only | current | The value of this object is the state of the CM authorization FSM. The start state indicates that FSM is in its initial state. |
| 1.3.6.1.2.1.126.1.1.1.1.4 | ColumndocsBpi2CmAuthKeySequenceNumber | read-only | current | The value of this object is the most recent authorization key sequence number for this FSM. |
| 1.3.6.1.2.1.126.1.1.1.1.5 | ColumndocsBpi2CmAuthExpiresOld | read-only | current | The value of this object is the actual clock time for expiration of the immediate predecessor of the most recent authorization key for this FSM. If this FSM ha… |
| 1.3.6.1.2.1.126.1.1.1.1.6 | ColumndocsBpi2CmAuthExpiresNew | read-only | current | The value of this object is the actual clock time for expiration of the most recent authorization key for this FSM. |
| 1.3.6.1.2.1.126.1.1.1.1.7 | ColumndocsBpi2CmAuthReset | read-write | current | Setting this object to 'true' generates a Reauthorize event in the authorization FSM. Reading this object always returns FALSE. This object is for testing purp… |
| 1.3.6.1.2.1.126.1.1.1.1.8 | ColumndocsBpi2CmAuthGraceTime | read-only | current | The value of this object is the grace time for an authorization key in seconds. A CM is expected to start trying to get a new authorization key beginning AuthG… |
| 1.3.6.1.2.1.126.1.1.1.1.9 | ColumndocsBpi2CmTEKGraceTime | read-only | current | The value of this object is the grace time for the TEK in seconds. The CM is expected to start trying to acquire a new TEK beginning TEK GraceTime seconds befo… |
| 1.3.6.1.2.1.126.1.1.1.1.10 | ColumndocsBpi2CmAuthWaitTimeout | read-only | current | The value of this object is the Authorize Wait Timeout in seconds. |
| 1.3.6.1.2.1.126.1.1.1.1.11 | ColumndocsBpi2CmReauthWaitTimeout | read-only | current | The value of this object is the Reauthorize Wait Timeout in seconds. |
| 1.3.6.1.2.1.126.1.1.1.1.12 | ColumndocsBpi2CmOpWaitTimeout | read-only | current | The value of this object is the Operational Wait Timeout in seconds. |
| 1.3.6.1.2.1.126.1.1.1.1.13 | ColumndocsBpi2CmRekeyWaitTimeout | read-only | current | The value of this object is the Rekey Wait Timeout in seconds. |
| 1.3.6.1.2.1.126.1.1.1.1.14 | ColumndocsBpi2CmAuthRejectWaitTimeout | read-only | current | The value of this object is the Authorization Reject Wait Timeout in seconds. |
| 1.3.6.1.2.1.126.1.1.1.1.15 | ColumndocsBpi2CmSAMapWaitTimeout | read-only | current | The value of this object is the retransmission interval, in seconds, of SA Map Requests from the MAP Wait state. |
| 1.3.6.1.2.1.126.1.1.1.1.16 | ColumndocsBpi2CmSAMapMaxRetries | read-only | current | The value of this object is the maximum number of Map Request retries allowed. |
| 1.3.6.1.2.1.126.1.1.1.1.17 | ColumndocsBpi2CmAuthentInfos | read-only | current | The value of this object is the number of times the CM has transmitted an Authentication Information message. Discontinuities in the value of this counter can … |
| 1.3.6.1.2.1.126.1.1.1.1.18 | ColumndocsBpi2CmAuthRequests | read-only | current | The value of this object is the number of times the CM has transmitted an Authorization Request message. Discontinuities in the value of this counter can occur… |
| 1.3.6.1.2.1.126.1.1.1.1.19 | ColumndocsBpi2CmAuthReplies | read-only | current | The value of this object is the number of times the CM has received an Authorization Reply message. Discontinuities in the value of this counter can occur at r… |
| 1.3.6.1.2.1.126.1.1.1.1.20 | ColumndocsBpi2CmAuthRejects | read-only | current | The value of this object is the number of times the CM has received an Authorization Reject message. Discontinuities in the value of this counter can occur at … |
| 1.3.6.1.2.1.126.1.1.1.1.21 | ColumndocsBpi2CmAuthInvalids | read-only | current | The value of this object is the count of times the CM has received an Authorization Invalid message. Discontinuities in the value of this counter can occur at … |
| 1.3.6.1.2.1.126.1.1.1.1.22 | ColumndocsBpi2CmAuthRejectErrorCode | read-only | current | The value of this object is the enumerated description of the Error-Code in the most recent Authorization Reject message received by the CM. This has the value… |
| 1.3.6.1.2.1.126.1.1.1.1.23 | ColumndocsBpi2CmAuthRejectErrorString | read-only | current | The value of this object is the text string in the most recent Authorization Reject message received by the CM. This is a zero length string if no Authorizatio… |
| 1.3.6.1.2.1.126.1.1.1.1.24 | ColumndocsBpi2CmAuthInvalidErrorCode | read-only | current | The value of this object is the enumerated description of the Error-Code in the most recent Authorization Invalid message received by the CM. This has the valu… |
| 1.3.6.1.2.1.126.1.1.1.1.25 | ColumndocsBpi2CmAuthInvalidErrorString | read-only | current | The value of this object is the text string in the most recent Authorization Invalid message received by the CM. This is a zero length string if no Authorizati… |
| 1.3.6.1.2.1.126.1.1.2 | TabledocsBpi2CmTEKTable | not-accessible | current | This table describes the attributes of each CM Traffic Encryption Key (TEK) association. The CM maintains (no more than) one TEK association per SAID per CM MA… |
| 1.3.6.1.2.1.126.1.1.2.1 | RowdocsBpi2CmTEKEntry | not-accessible | current | Each entry contains objects describing the TEK association attributes of one SAID. The CM MUST create one entry per SAID, regardless of whether the SAID was ob… |
| 1.3.6.1.2.1.126.1.1.2.1.1 | ColumndocsBpi2CmTEKSAId | not-accessible | current | The value of this object is the DOCSIS Security Association ID (SAID). |
| 1.3.6.1.2.1.126.1.1.2.1.2 | ColumndocsBpi2CmTEKSAType | read-only | current | The value of this object is the type of security association. |
| 1.3.6.1.2.1.126.1.1.2.1.3 | ColumndocsBpi2CmTEKDataEncryptAlg | read-only | current | The value of this object is the data encryption algorithm for this SAID. |
| 1.3.6.1.2.1.126.1.1.2.1.4 | ColumndocsBpi2CmTEKDataAuthentAlg | read-only | current | The value of this object is the data authentication algorithm for this SAID. |
| 1.3.6.1.2.1.126.1.1.2.1.5 | ColumndocsBpi2CmTEKState | read-only | current | The value of this object is the state of the indicated TEK FSM. The start(1) state indicates that the FSM is in its initial state. |
| 1.3.6.1.2.1.126.1.1.2.1.6 | ColumndocsBpi2CmTEKKeySequenceNumber | read-only | current | The value of this object is the most recent TEK key sequence number for this TEK FSM. |
| 1.3.6.1.2.1.126.1.1.2.1.7 | ColumndocsBpi2CmTEKExpiresOld | read-only | current | The value of this object is the actual clock time for expiration of the immediate predecessor of the most recent TEK for this FSM. If this FSM has only one TEK… |
| 1.3.6.1.2.1.126.1.1.2.1.8 | ColumndocsBpi2CmTEKExpiresNew | read-only | current | The value of this object is the actual clock time for expiration of the most recent TEK for this FSM. |
| 1.3.6.1.2.1.126.1.1.2.1.9 | ColumndocsBpi2CmTEKKeyRequests | read-only | current | The value of this object is the number of times the CM has transmitted a Key Request message. Discontinuities in the value of this counter can occur at re-init… |
| 1.3.6.1.2.1.126.1.1.2.1.10 | ColumndocsBpi2CmTEKKeyReplies | read-only | current | The value of this object is the number of times the CM has received a Key Reply message, including a message whose authentication failed. Discontinuities in th… |
| 1.3.6.1.2.1.126.1.1.2.1.11 | ColumndocsBpi2CmTEKKeyRejects | read-only | current | The value of this object is the number of times the CM has received a Key Reject message, including a message whose authentication failed. Discontinuities in t… |
| 1.3.6.1.2.1.126.1.1.2.1.12 | ColumndocsBpi2CmTEKInvalids | read-only | current | The value of this object is the number of times the CM has received a TEK Invalid message, including a message whose authentication failed. Discontinuities in … |
| 1.3.6.1.2.1.126.1.1.2.1.13 | ColumndocsBpi2CmTEKAuthPends | read-only | current | The value of this object is the count of times an Authorization Pending (Auth Pend) event occurred in this FSM. Discontinuities in the value of this counter ca… |
| 1.3.6.1.2.1.126.1.1.2.1.14 | ColumndocsBpi2CmTEKKeyRejectErrorCode | read-only | current | The value of this object is the enumerated description of the Error-Code in the most recent Key Reject message received by the CM. This has the value unknown(2… |
| 1.3.6.1.2.1.126.1.1.2.1.15 | ColumndocsBpi2CmTEKKeyRejectErrorString | read-only | current | The value of this object is the text string in the most recent Key Reject message received by the CM. This is a zero length string if no Key Reject message has… |
| 1.3.6.1.2.1.126.1.1.2.1.16 | ColumndocsBpi2CmTEKInvalidErrorCode | read-only | current | The value of this object is the enumerated description of the Error-Code in the most recent TEK Invalid message received by the CM. This has the value unknown(… |
| 1.3.6.1.2.1.126.1.1.2.1.17 | ColumndocsBpi2CmTEKInvalidErrorString | read-only | current | The value of this object is the text string in the most recent TEK Invalid message received by the CM. This is a zero length string if no TEK Invalid message h… |
| 1.3.6.1.2.1.126.1.1.3 | NodedocsBpi2CmMulticastObjects | |||
| 1.3.6.1.2.1.126.1.1.3.1 | TabledocsBpi2CmIpMulticastMapTable | not-accessible | current | This table maps multicast IP addresses to SAIDs per CM MAC Interface. It is intended to map multicast IP addresses associated with SA MAP Request messages. |
| 1.3.6.1.2.1.126.1.1.3.1.1 | RowdocsBpi2CmIpMulticastMapEntry | not-accessible | current | Each entry contains objects describing the mapping of one multicast IP address to one SAID, as well as associated state, message counters, and error informatio… |
| 1.3.6.1.2.1.126.1.1.3.1.1.1 | ColumndocsBpi2CmIpMulticastIndex | not-accessible | current | The index of this row. |
| 1.3.6.1.2.1.126.1.1.3.1.1.2 | ColumndocsBpi2CmIpMulticastAddressType | read-only | current | The type of Internet address for docsBpi2CmIpMulticastAddress. |
| 1.3.6.1.2.1.126.1.1.3.1.1.3 | ColumndocsBpi2CmIpMulticastAddress | read-only | current | This object represents the IP multicast address to be mapped. The type of this address is determined by the value of the docsBpi2CmIpMulticastAddressType objec… |
| 1.3.6.1.2.1.126.1.1.3.1.1.4 | ColumndocsBpi2CmIpMulticastSAId | read-only | current | This object represents the SAID to which the IP multicast address has been mapped. If no SA Map Reply has been received for the IP address, this object should … |
| 1.3.6.1.2.1.126.1.1.3.1.1.5 | ColumndocsBpi2CmIpMulticastSAMapState | read-only | current | The value of this object is the state of the SA Mapping FSM for this IP. |
| 1.3.6.1.2.1.126.1.1.3.1.1.6 | ColumndocsBpi2CmIpMulticastSAMapRequests | read-only | current | The value of this object is the number of times the CM has transmitted an SA Map Request message for this IP. Discontinuities in the value of this counter can … |
| 1.3.6.1.2.1.126.1.1.3.1.1.7 | ColumndocsBpi2CmIpMulticastSAMapReplies | read-only | current | The value of this object is the number of times the CM has received an SA Map Reply message for this IP. Discontinuities in the value of this counter can occur… |
| 1.3.6.1.2.1.126.1.1.3.1.1.8 | ColumndocsBpi2CmIpMulticastSAMapRejects | read-only | current | The value of this object is the number of times the CM has received an SA MAP Reject message for this IP. Discontinuities in the value of this counter can occu… |
| 1.3.6.1.2.1.126.1.1.3.1.1.9 | ColumndocsBpi2CmIpMulticastSAMapRejectErrorCode | read-only | current | The value of this object is the enumerated description of the Error-Code in the most recent SA Map Reject message sent in response to an SA Map Request for Thi… |
| 1.3.6.1.2.1.126.1.1.3.1.1.10 | ColumndocsBpi2CmIpMulticastSAMapRejectErrorString | read-only | current | The value of this object is the text string in the most recent SA Map Reject message sent in response to an SA Map Request for this IP. It is a zero length str… |
| 1.3.6.1.2.1.126.1.1.4 | NodedocsBpi2CmCertObjects | |||
| 1.3.6.1.2.1.126.1.1.4.1 | TabledocsBpi2CmDeviceCertTable | not-accessible | current | This table describes the Baseline Privacy Plus device certificates for each CM MAC interface. |
| 1.3.6.1.2.1.126.1.1.4.1.1 | RowdocsBpi2CmDeviceCertEntry | not-accessible | current | Each entry contains the device certificates of one CM MAC interface. An entry in this table exists for each ifEntry with an ifType of docsCableMaclayer(127). |
| 1.3.6.1.2.1.126.1.1.4.1.1.1 | ColumndocsBpi2CmDeviceCmCert | read-write | current | The X509 DER-encoded cable modem certificate. Note: This object can be set only when the value is the zero-length OCTET STRING; otherwise, an error of 'inconsi… |
| 1.3.6.1.2.1.126.1.1.4.1.1.2 | ColumndocsBpi2CmDeviceManufCert | read-only | current | The X509 DER-encoded manufacturer certificate that signed the cable modem certificate. |
| 1.3.6.1.2.1.126.1.1.5 | TabledocsBpi2CmCryptoSuiteTable | not-accessible | current | This table describes the Baseline Privacy Plus cryptographic suite capabilities for each CM MAC interface. |
| 1.3.6.1.2.1.126.1.1.5.1 | RowdocsBpi2CmCryptoSuiteEntry | not-accessible | current | Each entry contains a cryptographic suite pair that this CM MAC supports. |
| 1.3.6.1.2.1.126.1.1.5.1.1 | ColumndocsBpi2CmCryptoSuiteIndex | not-accessible | current | The index for a cryptographic suite row. |
| 1.3.6.1.2.1.126.1.1.5.1.2 | ColumndocsBpi2CmCryptoSuiteDataEncryptAlg | read-only | current | The value of this object is the data encryption algorithm for this cryptographic suite capability. |
| 1.3.6.1.2.1.126.1.1.5.1.3 | ColumndocsBpi2CmCryptoSuiteDataAuthentAlg | read-only | current | The value of this object is the data authentication algorithm for this cryptographic suite capability. |
| 1.3.6.1.2.1.126.1.2 | NodedocsBpi2CmtsObjects | |||
| 1.3.6.1.2.1.126.1.2.1 | TabledocsBpi2CmtsBaseTable | not-accessible | current | This table describes the basic Baseline Privacy attributes of each CMTS MAC interface. |
| 1.3.6.1.2.1.126.1.2.1.1 | RowdocsBpi2CmtsBaseEntry | not-accessible | current | Each entry contains objects describing attributes of one CMTS MAC interface. An entry in this table exists for each ifEntry with an ifType of docsCableMaclayer… |
| 1.3.6.1.2.1.126.1.2.1.1.1 | ColumndocsBpi2CmtsDefaultAuthLifetime | read-write | current | The value of this object is the default lifetime, in seconds, that the CMTS assigns to a new authorization key. This object value persists after re-initializat… |
| 1.3.6.1.2.1.126.1.2.1.1.2 | ColumndocsBpi2CmtsDefaultTEKLifetime | read-write | current | The value of this object is the default lifetime, in seconds, that the CMTS assigns to a new Traffic Encryption Key (TEK). This object value persists after re-… |
| 1.3.6.1.2.1.126.1.2.1.1.3 | ColumndocsBpi2CmtsDefaultSelfSignedManufCertTrust | read-write | current | This object determines the default trust of self-signed manufacturer certificate entries, contained in docsBpi2CmtsCACertTable, and created after this object i… |
| 1.3.6.1.2.1.126.1.2.1.1.4 | ColumndocsBpi2CmtsCheckCertValidityPeriods | read-write | current | Setting this object to 'true' causes all chained and root certificates in the chain to have their validity periods checked against the current time of day, whe… |
| 1.3.6.1.2.1.126.1.2.1.1.5 | ColumndocsBpi2CmtsAuthentInfos | read-only | current | The value of this object is the number of times the CMTS has received an Authentication Information message from any CM. Discontinuities in the value of this c… |
| 1.3.6.1.2.1.126.1.2.1.1.6 | ColumndocsBpi2CmtsAuthRequests | read-only | current | The value of this object is the number of times the CMTS has received an Authorization Request message from any CM. Discontinuities in the value of this counte… |
| 1.3.6.1.2.1.126.1.2.1.1.7 | ColumndocsBpi2CmtsAuthReplies | read-only | current | The value of this object is the number of times the CMTS has transmitted an Authorization Reply message to any CM. Discontinuities in the value of this counter… |
| 1.3.6.1.2.1.126.1.2.1.1.8 | ColumndocsBpi2CmtsAuthRejects | read-only | current | The value of this object is the number of times the CMTS has transmitted an Authorization Reject message to any CM. Discontinuities in the value of this counte… |
| 1.3.6.1.2.1.126.1.2.1.1.9 | ColumndocsBpi2CmtsAuthInvalids | read-only | current | The value of this object is the number of times the CMTS has transmitted an Authorization Invalid message to any CM. Discontinuities in the value of this count… |
| 1.3.6.1.2.1.126.1.2.1.1.10 | ColumndocsBpi2CmtsSAMapRequests | read-only | current | The value of this object is the number of times the CMTS has received an SA Map Request message from any CM. Discontinuities in the value of this counter can o… |
| 1.3.6.1.2.1.126.1.2.1.1.11 | ColumndocsBpi2CmtsSAMapReplies | read-only | current | The value of this object is the number of times the CMTS has transmitted an SA Map Reply message to any CM. Discontinuities in the value of this counter can oc… |
| 1.3.6.1.2.1.126.1.2.1.1.12 | ColumndocsBpi2CmtsSAMapRejects | read-only | current | The value of this object is the number of times the CMTS has transmitted an SA Map Reject message to any CM. Discontinuities in the value of this counter can o… |
| 1.3.6.1.2.1.126.1.2.2 | TabledocsBpi2CmtsAuthTable | not-accessible | current | This table describes the attributes of each CM authorization association. The CMTS maintains one authorization association with each Baseline Privacy- enabled … |
| 1.3.6.1.2.1.126.1.2.2.1 | RowdocsBpi2CmtsAuthEntry | not-accessible | current | Each entry contains objects describing attributes of one authorization association. The CMTS MUST create one entry per CM per MAC interface, based on the recei… |
| 1.3.6.1.2.1.126.1.2.2.1.1 | ColumndocsBpi2CmtsAuthCmMacAddress | not-accessible | current | The value of this object is the physical address of the CM to which the authorization association applies. |
| 1.3.6.1.2.1.126.1.2.2.1.2 | ColumndocsBpi2CmtsAuthCmBpiVersion | read-only | current | The value of this object is the version of Baseline Privacy for which this CM has registered. The value 'bpiplus' represents the value of BPI-Version Attribute… |
| 1.3.6.1.2.1.126.1.2.2.1.3 | ColumndocsBpi2CmtsAuthCmPublicKey | read-only | current | The value of this object is a DER-encoded RSAPublicKey ASN.1 type string, as defined in the RSA Encryption Standard (PKCS #1), corresponding to the public key … |
| 1.3.6.1.2.1.126.1.2.2.1.4 | ColumndocsBpi2CmtsAuthCmKeySequenceNumber | read-only | current | The value of this object is the most recent authorization key sequence number for this CM. |
| 1.3.6.1.2.1.126.1.2.2.1.5 | ColumndocsBpi2CmtsAuthCmExpiresOld | read-only | current | The value of this object is the actual clock time for expiration of the immediate predecessor of the most recent authorization key for this FSM. If this FSM ha… |
| 1.3.6.1.2.1.126.1.2.2.1.6 | ColumndocsBpi2CmtsAuthCmExpiresNew | read-only | current | The value of this object is the actual clock time for expiration of the most recent authorization key for this FSM. |
| 1.3.6.1.2.1.126.1.2.2.1.7 | ColumndocsBpi2CmtsAuthCmLifetime | read-write | current | The value of this object is the lifetime, in seconds, that the CMTS assigns to an authorization key for this CM. |
| 1.3.6.1.2.1.126.1.2.2.1.8 | ColumndocsBpi2CmtsAuthCmReset | read-write | current | Setting this object to invalidateAuth(2) causes the CMTS to invalidate the current CM authorization key(s), but not to transmit an Authorization Invalid messag… |
| 1.3.6.1.2.1.126.1.2.2.1.9 | ColumndocsBpi2CmtsAuthCmInfos | read-only | current | The value of this object is the number of times the CMTS has received an Authentication Information message from this CM. Discontinuities in the value of this … |
| 1.3.6.1.2.1.126.1.2.2.1.10 | ColumndocsBpi2CmtsAuthCmRequests | read-only | current | The value of this object is the number of times the CMTS has received an Authorization Request message from this CM. Discontinuities in the value of this count… |
| 1.3.6.1.2.1.126.1.2.2.1.11 | ColumndocsBpi2CmtsAuthCmReplies | read-only | current | The value of this object is the number of times the CMTS has transmitted an Authorization Reply message to this CM. Discontinuities in the value of this counte… |
| 1.3.6.1.2.1.126.1.2.2.1.12 | ColumndocsBpi2CmtsAuthCmRejects | read-only | current | The value of this object is the number of times the CMTS has transmitted an Authorization Reject message to this CM. Discontinuities in the value of this count… |
| 1.3.6.1.2.1.126.1.2.2.1.13 | ColumndocsBpi2CmtsAuthCmInvalids | read-only | current | The value of this object is the number of times the CMTS has transmitted an Authorization Invalid message to this CM. Discontinuities in the value of this coun… |
| 1.3.6.1.2.1.126.1.2.2.1.14 | ColumndocsBpi2CmtsAuthRejectErrorCode | read-only | current | The value of this object is the enumerated description of the Error-Code in the most recent Authorization Reject message transmitted to the CM. This has the va… |
| 1.3.6.1.2.1.126.1.2.2.1.15 | ColumndocsBpi2CmtsAuthRejectErrorString | read-only | current | The value of this object is the text string in the most recent Authorization Reject message transmitted to the CM. This is a zero length string if no Authoriza… |
| 1.3.6.1.2.1.126.1.2.2.1.16 | ColumndocsBpi2CmtsAuthInvalidErrorCode | read-only | current | The value of this object is the enumerated description of the Error-Code in the most recent Authorization Invalid message transmitted to the CM. This has the v… |
| 1.3.6.1.2.1.126.1.2.2.1.17 | ColumndocsBpi2CmtsAuthInvalidErrorString | read-only | current | The value of this object is the text string in the most recent Authorization Invalid message transmitted to the CM. This is a zero length string if no Authoriz… |
| 1.3.6.1.2.1.126.1.2.2.1.18 | ColumndocsBpi2CmtsAuthPrimarySAId | read-only | current | The value of this object is the Primary Security Association identifier. For BPI mode, the value must be any unicast SID. |
| 1.3.6.1.2.1.126.1.2.2.1.19 | ColumndocsBpi2CmtsAuthBpkmCmCertValid | read-only | current | Contains the reason why a CM's certificate is deemed valid or invalid. Return unknown(0) if the CM is running BPI mode. ValidCmChained(1) means the certificate… |
| 1.3.6.1.2.1.126.1.2.2.1.20 | ColumndocsBpi2CmtsAuthBpkmCmCert | read-only | current | The X509 CM Certificate sent as part of a BPKM Authorization Request. Note: The zero-length OCTET STRING must be returned if the Entire certificate is not reta… |
| 1.3.6.1.2.1.126.1.2.2.1.21 | ColumndocsBpi2CmtsAuthCACertIndexPtr | read-only | current | A row index into docsBpi2CmtsCACertTable. Returns the index in docsBpi2CmtsCACertTable to which CA certificate this CM is chained to. A value of 0 means it cou… |
| 1.3.6.1.2.1.126.1.2.3 | TabledocsBpi2CmtsTEKTable | not-accessible | current | This table describes the attributes of each Traffic Encryption Key (TEK) association. The CMTS Maintains one TEK association per SAID on each CMTS MAC interfac… |
| 1.3.6.1.2.1.126.1.2.3.1 | RowdocsBpi2CmtsTEKEntry | not-accessible | current | Each entry contains objects describing attributes of one TEK association on a particular CMTS MAC interface. The CMTS MUST create one entry per SAID per MAC in… |
| 1.3.6.1.2.1.126.1.2.3.1.1 | ColumndocsBpi2CmtsTEKSAId | not-accessible | current | The value of this object is the DOCSIS Security Association ID (SAID). |
| 1.3.6.1.2.1.126.1.2.3.1.2 | ColumndocsBpi2CmtsTEKSAType | read-only | current | The value of this object is the type of security association. 'dynamic' does not apply to CMs running in BPI mode. Unicast BPI TEKs must utilize the 'primary' … |
| 1.3.6.1.2.1.126.1.2.3.1.3 | ColumndocsBpi2CmtsTEKDataEncryptAlg | read-only | current | The value of this object is the data encryption algorithm for this SAID. |
| 1.3.6.1.2.1.126.1.2.3.1.4 | ColumndocsBpi2CmtsTEKDataAuthentAlg | read-only | current | The value of this object is the data authentication algorithm for this SAID. |
| 1.3.6.1.2.1.126.1.2.3.1.5 | ColumndocsBpi2CmtsTEKLifetime | read-write | current | The value of this object is the lifetime, in seconds, that the CMTS assigns to keys for this TEK association. |
| 1.3.6.1.2.1.126.1.2.3.1.6 | ColumndocsBpi2CmtsTEKKeySequenceNumber | read-only | current | The value of this object is the most recent TEK key sequence number for this SAID. |
| 1.3.6.1.2.1.126.1.2.3.1.7 | ColumndocsBpi2CmtsTEKExpiresOld | read-only | current | The value of this object is the actual clock time for expiration of the immediate predecessor of the most recent TEK for this FSM. If this FSM has only one TEK… |
| 1.3.6.1.2.1.126.1.2.3.1.8 | ColumndocsBpi2CmtsTEKExpiresNew | read-only | current | The value of this object is the actual clock time for expiration of the most recent TEK for this FSM. |
| 1.3.6.1.2.1.126.1.2.3.1.9 | ColumndocsBpi2CmtsTEKReset | read-write | current | Setting this object to 'true' causes the CMTS to invalidate all currently active TEKs and to generate new TEKs for the associated SAID; the CMTS MAY also gener… |
| 1.3.6.1.2.1.126.1.2.3.1.10 | ColumndocsBpi2CmtsKeyRequests | read-only | current | The value of this object is the number of times the CMTS has received a Key Request message. Discontinuities in the value of this counter can occur at re-initi… |
| 1.3.6.1.2.1.126.1.2.3.1.11 | ColumndocsBpi2CmtsKeyReplies | read-only | current | The value of this object is the number of times the CMTS has transmitted a Key Reply message. Discontinuities in the value of this counter can occur at re-init… |
| 1.3.6.1.2.1.126.1.2.3.1.12 | ColumndocsBpi2CmtsKeyRejects | read-only | current | The value of this object is the number of times the CMTS has transmitted a Key Reject message. Discontinuities in the value of this counter can occur at re-ini… |
| 1.3.6.1.2.1.126.1.2.3.1.13 | ColumndocsBpi2CmtsTEKInvalids | read-only | current | The value of this object is the number of times the CMTS has transmitted a TEK Invalid message. Discontinuities in the value of this counter can occur at re-in… |
| 1.3.6.1.2.1.126.1.2.3.1.14 | ColumndocsBpi2CmtsKeyRejectErrorCode | read-only | current | The value of this object is the enumerated description of the Error-Code in the most recent Key Reject message sent in response to a Key Request for this SAID.… |
| 1.3.6.1.2.1.126.1.2.3.1.15 | ColumndocsBpi2CmtsKeyRejectErrorString | read-only | current | The value of this object is the text string in the most recent Key Reject message sent in response to a Key Request for this SAID. This is a zero length string… |
| 1.3.6.1.2.1.126.1.2.3.1.16 | ColumndocsBpi2CmtsTEKInvalidErrorCode | read-only | current | The value of this object is the enumerated description of the Error-Code in the most recent TEK Invalid message sent in association with this SAID. This has th… |
| 1.3.6.1.2.1.126.1.2.3.1.17 | ColumndocsBpi2CmtsTEKInvalidErrorString | read-only | current | The value of this object is the text string in the most recent TEK Invalid message sent in association with this SAID. This is a zero length string if no TEK I… |
| 1.3.6.1.2.1.126.1.2.4 | NodedocsBpi2CmtsMulticastObjects | |||
| 1.3.6.1.2.1.126.1.2.4.1 | TabledocsBpi2CmtsIpMulticastMapTable | not-accessible | current | This table maps multicast IP addresses to SAIDs. If a multicast IP address is mapped by multiple rows in the table, the row with the lowest docsBpi2CmtsIpMulti… |
| 1.3.6.1.2.1.126.1.2.4.1.1 | RowdocsBpi2CmtsIpMulticastMapEntry | not-accessible | current | Each entry contains objects describing the mapping of a set of multicast IP address and the mask to one SAID associated to a CMTS MAC Interface, as well as ass… |
| 1.3.6.1.2.1.126.1.2.4.1.1.1 | ColumndocsBpi2CmtsIpMulticastIndex | not-accessible | current | The index of this row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. |
| 1.3.6.1.2.1.126.1.2.4.1.1.2 | ColumndocsBpi2CmtsIpMulticastAddressType | read-create | current | The type of Internet address for docsBpi2CmtsIpMulticastAddress and docsBpi2CmtsIpMulticastMask. |
| 1.3.6.1.2.1.126.1.2.4.1.1.3 | ColumndocsBpi2CmtsIpMulticastAddress | read-create | current | This object represents the IP multicast address to be mapped, in conjunction with docsBpi2CmtsIpMulticastMask. The type of this address is determined by the va… |
| 1.3.6.1.2.1.126.1.2.4.1.1.4 | ColumndocsBpi2CmtsIpMulticastMask | read-create | current | This object represents the IP multicast address mask for this row. An IP multicast address matches this row if the logical AND of the address with docsBpi2Cmts… |
| 1.3.6.1.2.1.126.1.2.4.1.1.5 | ColumndocsBpi2CmtsIpMulticastSAId | read-create | current | This object represents the multicast SAID to be used in this IP multicast address mapping entry. |
| 1.3.6.1.2.1.126.1.2.4.1.1.6 | ColumndocsBpi2CmtsIpMulticastSAType | read-create | current | The value of this object is the type of security association. 'dynamic' does not apply to CMs running in BPI mode. Unicast BPI TEKs must utilize the 'primary' … |
| 1.3.6.1.2.1.126.1.2.4.1.1.7 | ColumndocsBpi2CmtsIpMulticastDataEncryptAlg | read-create | current | The value of this object is the data encryption algorithm for this IP. |
| 1.3.6.1.2.1.126.1.2.4.1.1.8 | ColumndocsBpi2CmtsIpMulticastDataAuthentAlg | read-create | current | The value of this object is the data authentication algorithm for this IP. |
| 1.3.6.1.2.1.126.1.2.4.1.1.9 | ColumndocsBpi2CmtsIpMulticastSAMapRequests | read-only | current | The value of this object is the number of times the CMTS has received an SA Map Request message for this IP. Discontinuities in the value of this counter can o… |
| 1.3.6.1.2.1.126.1.2.4.1.1.10 | ColumndocsBpi2CmtsIpMulticastSAMapReplies | read-only | current | The value of this object is the number of times the CMTS has transmitted an SA Map Reply message for this IP. Discontinuities in the value of this counter can … |
| 1.3.6.1.2.1.126.1.2.4.1.1.11 | ColumndocsBpi2CmtsIpMulticastSAMapRejects | read-only | current | The value of this object is the number of times the CMTS has transmitted an SA Map Reject message for this IP. Discontinuities in the value of this counter can… |
| 1.3.6.1.2.1.126.1.2.4.1.1.12 | ColumndocsBpi2CmtsIpMulticastSAMapRejectErrorCode | read-only | current | The value of this object is the enumerated description of the Error-Code in the most recent SA Map Reject message sent in response to an SA Map Request for thi… |
| 1.3.6.1.2.1.126.1.2.4.1.1.13 | ColumndocsBpi2CmtsIpMulticastSAMapRejectErrorString | read-only | current | The value of this object is the text string in the most recent SA Map Reject message sent in response to an SA Map Request for this IP. It is a zero length str… |
| 1.3.6.1.2.1.126.1.2.4.1.1.14 | ColumndocsBpi2CmtsIpMulticastMapControl | read-create | current | This object controls and reflects the IP multicast address mapping entry. There is no restriction on the ability to change values in this row while the row is … |
| 1.3.6.1.2.1.126.1.2.4.1.1.15 | ColumndocsBpi2CmtsIpMulticastMapStorageType | read-only | current | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. |
| 1.3.6.1.2.1.126.1.2.4.2 | TabledocsBpi2CmtsMulticastAuthTable | not-accessible | current | This table describes the multicast SAID authorization for each CM on each CMTS MAC interface. |
| 1.3.6.1.2.1.126.1.2.4.2.1 | RowdocsBpi2CmtsMulticastAuthEntry | not-accessible | current | Each entry contains objects describing the key authorization of one cable modem for one multicast SAID for one CMTS MAC interface. Row entries persist after re… |
| 1.3.6.1.2.1.126.1.2.4.2.1.1 | ColumndocsBpi2CmtsMulticastAuthSAId | not-accessible | current | This object represents the multicast SAID for authorization. |
| 1.3.6.1.2.1.126.1.2.4.2.1.2 | ColumndocsBpi2CmtsMulticastAuthCmMacAddress | not-accessible | current | This object represents the MAC address of the CM to which the multicast SAID authorization applies. |
| 1.3.6.1.2.1.126.1.2.4.2.1.3 | ColumndocsBpi2CmtsMulticastAuthControl | read-create | current | The status of this conceptual row for the authorization of multicast SAIDs to CMs. |
| 1.3.6.1.2.1.126.1.2.5 | NodedocsBpi2CmtsCertObjects | |||
| 1.3.6.1.2.1.126.1.2.5.1 | TabledocsBpi2CmtsProvisionedCmCertTable | not-accessible | current | A table of CM certificate trust entries provisioned to the CMTS. The trust object for a certificate in this table has an overriding effect on the validity obje… |
| 1.3.6.1.2.1.126.1.2.5.1.1 | RowdocsBpi2CmtsProvisionedCmCertEntry | not-accessible | current | An entry in the CMTS's provisioned CM certificate table. Row entries persist after re-initialization of the managed system. |
| 1.3.6.1.2.1.126.1.2.5.1.1.1 | ColumndocsBpi2CmtsProvisionedCmCertMacAddress | not-accessible | current | The index of this row. |
| 1.3.6.1.2.1.126.1.2.5.1.1.2 | ColumndocsBpi2CmtsProvisionedCmCertTrust | read-create | current | Trust state for the provisioned CM certificate entry. Note: Setting this object need only override the validity of CM certificates sent in future authorization… |
| 1.3.6.1.2.1.126.1.2.5.1.1.3 | ColumndocsBpi2CmtsProvisionedCmCertSource | read-only | current | This object indicates how the certificate reached the CMTS. Other(4) means that it originated from a source not identified above. |
| 1.3.6.1.2.1.126.1.2.5.1.1.4 | ColumndocsBpi2CmtsProvisionedCmCertStatus | read-create | current | The status of this conceptual row. Values in this row cannot be changed while the row is 'active'. |
| 1.3.6.1.2.1.126.1.2.5.1.1.5 | ColumndocsBpi2CmtsProvisionedCmCert | read-create | current | An X509 DER-encoded Certificate Authority certificate. Note: The zero-length OCTET STRING must be returned, on reads, if the entire certificate is not retained… |
| 1.3.6.1.2.1.126.1.2.5.2 | TabledocsBpi2CmtsCACertTable | not-accessible | current | The table of known Certificate Authority certificates acquired by this device. |
| 1.3.6.1.2.1.126.1.2.5.2.1 | RowdocsBpi2CmtsCACertEntry | not-accessible | current | A row in the Certificate Authority certificate table. Row entries with the trust status 'trusted', 'untrusted', or 'root' persist after re-initialization of th… |
| 1.3.6.1.2.1.126.1.2.5.2.1.1 | ColumndocsBpi2CmtsCACertIndex | not-accessible | current | The index for this row. |
| 1.3.6.1.2.1.126.1.2.5.2.1.2 | ColumndocsBpi2CmtsCACertSubject | read-only | current | The subject name exactly as it is encoded in the X509 certificate. The organizationName portion of the certificate's subject name must be present. All other fi… |
| 1.3.6.1.2.1.126.1.2.5.2.1.3 | ColumndocsBpi2CmtsCACertIssuer | read-only | current | The issuer name exactly as it is encoded in the X509 certificate. The commonName portion of the certificate's issuer name must be present. All other fields are… |
| 1.3.6.1.2.1.126.1.2.5.2.1.4 | ColumndocsBpi2CmtsCACertSerialNumber | read-only | current | This CA certificate's serial number, represented as an octet string. |
| 1.3.6.1.2.1.126.1.2.5.2.1.5 | ColumndocsBpi2CmtsCACertTrust | read-create | current | This object controls the trust status of this certificate. Root certificates must be given root(4) trust; manufacturer certificates must not be given root(4) t… |
| 1.3.6.1.2.1.126.1.2.5.2.1.6 | ColumndocsBpi2CmtsCACertSource | read-only | current | This object indicates how the certificate reached the CMTS. Other(4) means that it originated from a source not identified above. |
| 1.3.6.1.2.1.126.1.2.5.2.1.7 | ColumndocsBpi2CmtsCACertStatus | read-create | current | The status of this conceptual row. An attempt to set writable columnar values while this row is active behaves as follows: - Sets to the object docsBpi2CmtsCAC… |
| 1.3.6.1.2.1.126.1.2.5.2.1.8 | ColumndocsBpi2CmtsCACert | read-create | current | An X509 DER-encoded Certificate Authority certificate. To help identify certificates, either this object or docsBpi2CmtsCACertThumbprint must be returned by a … |
| 1.3.6.1.2.1.126.1.2.5.2.1.9 | ColumndocsBpi2CmtsCACertThumbprint | read-only | current | The SHA-1 hash of a CA certificate. To help identify certificates, either this object or docsBpi2CmtsCACert must be returned by a CMTS for self-signed CA certi… |
| 1.3.6.1.2.1.126.1.4 | NodedocsBpi2CodeDownloadControl | |||
| 1.3.6.1.2.1.126.1.4.1 | ScalardocsBpi2CodeDownloadStatusCode | read-only | current | The value indicates the result of the latest config file CVC verification, SNMP CVC verification, or code file verification. |
| 1.3.6.1.2.1.126.1.4.2 | ScalardocsBpi2CodeDownloadStatusString | read-only | current | The value of this object indicates the additional information to the status code. The value will include the error code and error description, which will be de… |
| 1.3.6.1.2.1.126.1.4.3 | ScalardocsBpi2CodeMfgOrgName | read-only | current | The value of this object is the device manufacturer's organizationName. |
| 1.3.6.1.2.1.126.1.4.4 | ScalardocsBpi2CodeMfgCodeAccessStart | read-only | current | The value of this object is the device manufacturer's current codeAccessStart value. This value will always refer to Greenwich Mean Time (GMT), and the value f… |
| 1.3.6.1.2.1.126.1.4.5 | ScalardocsBpi2CodeMfgCvcAccessStart | read-only | current | The value of this object is the device manufacturer's current cvcAccessStart value. This value will always refer to Greenwich Mean Time (GMT), and the value fo… |
| 1.3.6.1.2.1.126.1.4.6 | ScalardocsBpi2CodeCoSignerOrgName | read-only | current | The value of this object is the co-signer's organizationName. The value is a zero length string if the co-signer is not specified. |
| 1.3.6.1.2.1.126.1.4.7 | ScalardocsBpi2CodeCoSignerCodeAccessStart | read-only | current | The value of this object is the co-signer's current codeAccessStart value. This value will always refer to Greenwich Mean Time (GMT), and the value format must… |
| 1.3.6.1.2.1.126.1.4.8 | ScalardocsBpi2CodeCoSignerCvcAccessStart | read-only | current | The value of this object is the co-signer's current cvcAccessStart value. This value will always refer to Greenwich Mean Time (GMT), and the value format must … |
| 1.3.6.1.2.1.126.1.4.9 | ScalardocsBpi2CodeCvcUpdate | read-write | current | Setting a CVC to this object triggers the device to verify the CVC and update the cvcAccessStart values. The content of this object is then discarded. If the d… |
| 1.3.6.1.2.1.126.2 | NodedocsBpi2Conformance | |||
| 1.3.6.1.2.1.126.2.1 | NodedocsBpi2Compliances | |||
| 1.3.6.1.2.1.126.2.1.1 | CompliancedocsBpi2CmCompliance | current | This is the compliance statement for CMs that implement the DOCSIS Baseline Privacy Interface Plus. | |
| 1.3.6.1.2.1.126.2.1.2 | CompliancedocsBpi2CmtsCompliance | read-only | current | This is the compliance statement for CMTSs that implement the DOCSIS Baseline Privacy Interface Plus. |
| 1.3.6.1.2.1.126.2.2 | NodedocsBpi2Groups | |||
| 1.3.6.1.2.1.126.2.2.1 | GroupdocsBpi2CmGroup | current | This collection of objects provides CM BPI+ status and control. | |
| 1.3.6.1.2.1.126.2.2.2 | GroupdocsBpi2CmtsGroup | current | This collection of objects provides CMTS BPI+ status and control. | |
| 1.3.6.1.2.1.126.2.2.3 | GroupdocsBpi2CodeDownloadGroup | current | This collection of objects provides authenticated software download support. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DocsBpkmDataAuthentAlg | INTEGER { none(0), hmacSha196(1) } | current | The list of data integrity algorithms defined for the DOCSIS interface in the BPKM cryptographic-suite parameter. The value 'none' indicates that no data integrity is used for the SAID being referenced. |
| DocsBpkmDataEncryptAlg | INTEGER { none(0), des56CbcMode(1), des40CbcMode(2), t3Des128CbcMode(3), aes128CbcMode(4), aes256CbcMode(5) } | current | The list of data encryption algorithms defined for the DOCSIS interface in the BPKM cryptographic-suite parameter. The value 'none' indicates that the SAID being referenced has no data encryption. |
| DocsBpkmSAType | INTEGER { none(0), primary(1), static(2), dynamic(3) } | current | The type of security association (SA). The values of the named-numbers are associated with the BPKM SA-Type attributes: 'primary' corresponds to code '1', 'static' to code '2', and 'dynamic' to code '3'. The 'none' valu… |
| DocsSAId | Integer32 (1..16383) | current | Security Association identifier (SAID). |
| DocsSAIdOrZero | Unsigned32 (0 | 1..16383) | current | Security Association identifier (SAID). The value zero indicates that the SAID is yet to be determined. |
| DocsX509ASN1DEREncodedCertificate | OCTET STRING (SIZE (0..4096)) | current | An X509 digital certificate encoded as an ASN.1 DER object. |