DOCS-IF-MIB
245 objects
This is the MIB Module for DOCSIS 2.0-compliant Radio Frequency (RF) interfaces in Cable Modems and Cable Modem Termination Systems. Copyright (C) The Internet Society (2006). This version of this MIB module is part of RFC 4546; see the RFC itself for full legal notices.
Imported Objects
| IANAifType-MIB | IANAifType |
| IF-MIB | ifIndex InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE TimeTicks transmission Unsigned32 |
| SNMPv2-TC | MacAddress RowStatus StorageType TEXTUAL-CONVENTION TimeInterval TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.127 | IdentitydocsIfMib | This is the MIB Module for DOCSIS 2.0-compliant Radio Frequency (RF) interfaces in Cable Modems and Cable Modem Termination Systems. Copyright (C) The Internet… | ||
| 1.3.6.1.2.1.10.127.1 | NodedocsIfMibObjects | |||
| 1.3.6.1.2.1.10.127.1.1 | NodedocsIfBaseObjects | |||
| 1.3.6.1.2.1.10.127.1.1.1 | TabledocsIfDownstreamChannelTable | not-accessible | current | This table describes the attributes of downstream channels (frequency bands). |
| 1.3.6.1.2.1.10.127.1.1.1.1 | RowdocsIfDownstreamChannelEntry | not-accessible | current | An entry provides a list of attributes for a single downstream channel. An entry in this table exists for each ifEntry with an ifType of docsCableDownstream(12… |
| 1.3.6.1.2.1.10.127.1.1.1.1.1 | ColumndocsIfDownChannelId | read-only | current | The Cable Modem Termination System identification of the downstream channel within this particular MAC interface. if the interface is down, the object returns … |
| 1.3.6.1.2.1.10.127.1.1.1.1.2 | ColumndocsIfDownChannelFrequency | read-write | current | The center of the downstream frequency associated with this channel. This object will return the current tuner frequency. If a CMTS provides IF output, this ob… |
| 1.3.6.1.2.1.10.127.1.1.1.1.3 | ColumndocsIfDownChannelWidth | read-write | current | The bandwidth of this downstream channel. Most implementations are expected to support a channel width of 6 MHz (North America) and/or 8 MHz (Europe). See the … |
| 1.3.6.1.2.1.10.127.1.1.1.1.4 | ColumndocsIfDownChannelModulation | read-write | current | The modulation type associated with this downstream channel. If the interface is down, this object either returns the configured value (CMTS), the most current… |
| 1.3.6.1.2.1.10.127.1.1.1.1.5 | ColumndocsIfDownChannelInterleave | read-write | current | The Forward Error Correction (FEC) interleaving used for this downstream channel. Values are defined as follows: taps8Increment16(3): protection 5.9/4.1 usec, … |
| 1.3.6.1.2.1.10.127.1.1.1.1.6 | ColumndocsIfDownChannelPower | read-write | current | At the CMTS, the operational transmit power. At the CM, the received power level. If the interface is down, this object either returns the configured value (CM… |
| 1.3.6.1.2.1.10.127.1.1.1.1.7 | ColumndocsIfDownChannelAnnex | read-only | current | The value of this object indicates the conformance of the implementation to important regional cable standards. annexA : Annex A from ITU-T J.83 is used. (equi… |
| 1.3.6.1.2.1.10.127.1.1.1.1.8 | ColumndocsIfDownChannelStorageType | read-only | current | The storage type for this conceptual row. Entries with this object set to permanent(4) do not require write operations for read-write objects. |
| 1.3.6.1.2.1.10.127.1.1.2 | TabledocsIfUpstreamChannelTable | not-accessible | current | This table describes the attributes of attached upstream channels. |
| 1.3.6.1.2.1.10.127.1.1.2.1 | RowdocsIfUpstreamChannelEntry | not-accessible | current | List of attributes for a single upstream channel. For DOCSIS 2.0 CMTSs, an entry in this table exists for each ifEntry with an ifType of docsCableUpstreamChann… |
| 1.3.6.1.2.1.10.127.1.1.2.1.1 | ColumndocsIfUpChannelId | read-only | current | The CMTS identification of the upstream channel. |
| 1.3.6.1.2.1.10.127.1.1.2.1.2 | ColumndocsIfUpChannelFrequency | read-create | current | The center of the frequency band associated with this upstream interface. This object returns 0 if the frequency is undefined or unknown. Minimum permitted ups… |
| 1.3.6.1.2.1.10.127.1.1.2.1.3 | ColumndocsIfUpChannelWidth | read-create | current | The bandwidth of this upstream interface. This object returns 0 if the interface width is undefined or unknown. Minimum permitted interface width is currently … |
| 1.3.6.1.2.1.10.127.1.1.2.1.4 | ColumndocsIfUpChannelModulationProfile | read-create | current | An entry identical to the docsIfModIndex in the docsIfCmtsModulationTable that describes this channel. This channel is further instantiated there by a grouping… |
| 1.3.6.1.2.1.10.127.1.1.2.1.5 | ColumndocsIfUpChannelSlotSize | read-create | current | Applicable to TDMA and ATDMA channel types only. The number of 6.25 microsecond ticks in each upstream mini-slot. Returns zero if the value is undefined or unk… |
| 1.3.6.1.2.1.10.127.1.1.2.1.6 | ColumndocsIfUpChannelTxTimingOffset | read-only | current | At the CM, a measure of the current round trip time obtained from the ranging offset (initial ranging offset + ranging offset adjustments). At the CMTS, the ma… |
| 1.3.6.1.2.1.10.127.1.1.2.1.7 | ColumndocsIfUpChannelRangingBackoffStart | read-create | current | The initial random backoff window to use when retrying Ranging Requests. Expressed as a power of 2. A value of 16 at the CMTS indicates that a proprietary adap… |
| 1.3.6.1.2.1.10.127.1.1.2.1.8 | ColumndocsIfUpChannelRangingBackoffEnd | read-create | current | The final random backoff window to use when retrying Ranging Requests. Expressed as a power of 2. A value of 16 at the CMTS indicates that a proprietary adapti… |
| 1.3.6.1.2.1.10.127.1.1.2.1.9 | ColumndocsIfUpChannelTxBackoffStart | read-create | current | The initial random backoff window to use when retrying transmissions. Expressed as a power of 2. A value of 16 at the CMTS indicates that a proprietary adaptiv… |
| 1.3.6.1.2.1.10.127.1.1.2.1.10 | ColumndocsIfUpChannelTxBackoffEnd | read-create | current | The final random backoff window to use when retrying transmissions. Expressed as a power of 2. A value of 16 at the CMTS indicates that a proprietary adaptive … |
| 1.3.6.1.2.1.10.127.1.1.2.1.11 | ColumndocsIfUpChannelScdmaActiveCodes | read-create | current | Applicable for SCDMA channel types only. Number of active codes. Returns zero for Non-SCDMA channel types. Note that legal values from 64..128 MUST be non-prim… |
| 1.3.6.1.2.1.10.127.1.1.2.1.12 | ColumndocsIfUpChannelScdmaCodesPerSlot | read-create | current | Applicable for SCDMA channel types only. The number of SCDMA codes per mini-slot. Returns zero if the value is undefined or unknown or in case of a TDMA or ATD… |
| 1.3.6.1.2.1.10.127.1.1.2.1.13 | ColumndocsIfUpChannelScdmaFrameSize | read-create | current | Applicable for SCDMA channel types only. SCDMA Frame size in units of spreading intervals. This value returns zero for non-SCDMA Profiles. |
| 1.3.6.1.2.1.10.127.1.1.2.1.14 | ColumndocsIfUpChannelScdmaHoppingSeed | read-create | current | Applicable for SCDMA channel types only. 15-bit seed used for code hopping sequence initialization. Returns zero for non-SCDMA channel types. Setting this valu… |
| 1.3.6.1.2.1.10.127.1.1.2.1.15 | ColumndocsIfUpChannelType | read-only | current | Reflects the Upstream channel type. This object returns the value of docsIfCmtsModChannelType for the modulation profile selected in docsIfUpChannelModulationP… |
| 1.3.6.1.2.1.10.127.1.1.2.1.16 | ColumndocsIfUpChannelCloneFrom | read-create | current | This object contains the ifIndex value of the physical interface row entry whose parameters are to be adjusted. Upon setting this object to the ifIndex value o… |
| 1.3.6.1.2.1.10.127.1.1.2.1.17 | ColumndocsIfUpChannelUpdate | read-create | current | Used to perform the copy of adjusted parameters from the temporary interface entry to the physical interface indicated by the docsIfUpChannelCloneFrom object. … |
| 1.3.6.1.2.1.10.127.1.1.2.1.18 | ColumndocsIfUpChannelStatus | read-create | current | This object is only used for the creation of a temporary upstream row with the purpose of updating the parameters of a physical upstream channel entry. The fol… |
| 1.3.6.1.2.1.10.127.1.1.2.1.19 | ColumndocsIfUpChannelPreEqEnable | read-create | current | At the CMTS, this object is used to enable or disable pre-equalization on the upstream channel represented by this table instance. At the CM, this object is re… |
| 1.3.6.1.2.1.10.127.1.1.3 | TabledocsIfQosProfileTable | not-accessible | current | Describes the attributes for each class of service. |
| 1.3.6.1.2.1.10.127.1.1.3.1 | RowdocsIfQosProfileEntry | not-accessible | current | Describes the attributes for a single class of service. If implemented as read-create in the Cable Modem Termination System, creation of entries in this table … |
| 1.3.6.1.2.1.10.127.1.1.3.1.1 | ColumndocsIfQosProfIndex | not-accessible | current | The index value that uniquely identifies an entry in the docsIfQosProfileTable. |
| 1.3.6.1.2.1.10.127.1.1.3.1.2 | ColumndocsIfQosProfPriority | read-create | current | A relative priority assigned to this service when allocating bandwidth. Zero indicates lowest priority and seven indicates highest priority. Interpretation of … |
| 1.3.6.1.2.1.10.127.1.1.3.1.3 | ColumndocsIfQosProfMaxUpBandwidth | read-create | current | The maximum upstream bandwidth, in bits per second, allowed for a service with this service class. Zero if there is no restriction of upstream bandwidth. MUST … |
| 1.3.6.1.2.1.10.127.1.1.3.1.4 | ColumndocsIfQosProfGuarUpBandwidth | read-create | current | Minimum guaranteed upstream bandwidth, in bits per second, allowed for a service with this service class. MUST NOT be changed while this row is active. |
| 1.3.6.1.2.1.10.127.1.1.3.1.5 | ColumndocsIfQosProfMaxDownBandwidth | read-create | current | The maximum downstream bandwidth, in bits per second, allowed for a service with this service class. Zero if there is no restriction of downstream bandwidth. M… |
| 1.3.6.1.2.1.10.127.1.1.3.1.6 | ColumndocsIfQosProfMaxTxBurst | read-create | deprecated | The maximum number of mini-slots that may be requested for a single upstream transmission. A value of zero means there is no limit. MUST NOT be changed while t… |
| 1.3.6.1.2.1.10.127.1.1.3.1.7 | ColumndocsIfQosProfBaselinePrivacy | read-create | current | Indicates whether Baseline Privacy is enabled for this service class. MUST NOT be changed while this row is active. |
| 1.3.6.1.2.1.10.127.1.1.3.1.8 | ColumndocsIfQosProfStatus | read-create | current | This is object is used to create or delete rows in this table. This object MUST NOT be changed from active while the row is referenced by any entry in either d… |
| 1.3.6.1.2.1.10.127.1.1.3.1.9 | ColumndocsIfQosProfMaxTransmitBurst | read-create | current | The maximum number of bytes that may be requested for a single upstream transmission. A value of zero means there is no limit. Note: This value does not includ… |
| 1.3.6.1.2.1.10.127.1.1.3.1.10 | ColumndocsIfQosProfStorageType | read-only | current | The storage type for this conceptual row. Entries with this object set to permanent(4) do not require write operations for writable objects. |
| 1.3.6.1.2.1.10.127.1.1.4 | TabledocsIfSignalQualityTable | not-accessible | current | At the CM, describes the PHY signal quality of downstream channels. At the CMTS, this object describes the PHY signal quality of upstream channels. At the CMTS… |
| 1.3.6.1.2.1.10.127.1.1.4.1 | RowdocsIfSignalQualityEntry | not-accessible | current | At the CM, this object describes the PHY characteristics of a downstream channel. At the CMTS, it describes the PHY signal quality of an upstream channel. An e… |
| 1.3.6.1.2.1.10.127.1.1.4.1.1 | ColumndocsIfSigQIncludesContention | read-only | current | true(1) if this CMTS includes contention intervals in the counters in this table. Always false(2) for CMs. |
| 1.3.6.1.2.1.10.127.1.1.4.1.2 | ColumndocsIfSigQUnerroreds | read-only | current | Codewords received on this channel without error. This includes all codewords, whether or not they were part of frames destined for this device. Discontinuitie… |
| 1.3.6.1.2.1.10.127.1.1.4.1.3 | ColumndocsIfSigQCorrecteds | read-only | current | Codewords received on this channel with correctable errors. This includes all codewords, whether or not they were part of frames destined for this device. Disc… |
| 1.3.6.1.2.1.10.127.1.1.4.1.4 | ColumndocsIfSigQUncorrectables | read-only | current | Codewords received on this channel with uncorrectable errors. This includes all codewords, whether or not they were part of frames destined for this device. Di… |
| 1.3.6.1.2.1.10.127.1.1.4.1.5 | ColumndocsIfSigQSignalNoise | read-only | current | Signal/Noise ratio as perceived for this channel. At the CM, this object describes the Signal/Noise of the downstream channel. At the CMTS, it describes the av… |
| 1.3.6.1.2.1.10.127.1.1.4.1.6 | ColumndocsIfSigQMicroreflections | read-only | current | Microreflections, including in-channel response as perceived on this interface, measured in dBc below the signal level. This object is not assumed to return an… |
| 1.3.6.1.2.1.10.127.1.1.4.1.7 | ColumndocsIfSigQEqualizationData | read-only | current | At the CM, this object returns the equalization data for the downstream channel. At the CMTS, this object is not applicable and is not instantiated. Note that … |
| 1.3.6.1.2.1.10.127.1.1.4.1.8 | ColumndocsIfSigQExtUnerroreds | read-only | current | Codewords received on this channel without error. This includes all codewords, whether or not they were part of frames destined for this device. This is the 64… |
| 1.3.6.1.2.1.10.127.1.1.4.1.9 | ColumndocsIfSigQExtCorrecteds | read-only | current | Codewords received on this channel with correctable errors. This includes all codewords, whether or not they were part of frames destined for this device. This… |
| 1.3.6.1.2.1.10.127.1.1.4.1.10 | ColumndocsIfSigQExtUncorrectables | read-only | current | Codewords received on this channel with uncorrectable errors. This includes all codewords, whether or not they were part of frames destined for this device. Th… |
| 1.3.6.1.2.1.10.127.1.1.5 | ScalardocsIfDocsisBaseCapability | read-only | current | Indication of the DOCSIS capability of the device. |
| 1.3.6.1.2.1.10.127.1.2 | NodedocsIfCmObjects | |||
| 1.3.6.1.2.1.10.127.1.2.1 | TabledocsIfCmMacTable | not-accessible | current | Describes the attributes of each CM MAC interface, extending the information available from ifEntry. |
| 1.3.6.1.2.1.10.127.1.2.1.1 | RowdocsIfCmMacEntry | not-accessible | current | An entry containing objects describing attributes of each MAC entry, extending the information in ifEntry. An entry in this table exists for each ifEntry with … |
| 1.3.6.1.2.1.10.127.1.2.1.1.1 | ColumndocsIfCmCmtsAddress | read-only | current | Identifies the CMTS that is believed to control this MAC domain. At the CM, this will be the source address from SYNC, MAP, and other MAC-layer messages. If th… |
| 1.3.6.1.2.1.10.127.1.2.1.1.2 | ColumndocsIfCmCapabilities | read-only | current | Identifies the capabilities of the MAC implementation at this interface. Note that packet transmission is always supported. Therefore, there is no specific bit… |
| 1.3.6.1.2.1.10.127.1.2.1.1.3 | ColumndocsIfCmRangingRespTimeout | read-write | obsolete | Waiting time for a Ranging Response packet. This object has been obsoleted and replaced by docsIfCmRangingTimeout to correct the typing to TimeInterval. |
| 1.3.6.1.2.1.10.127.1.2.1.1.4 | ColumndocsIfCmRangingTimeout | read-write | current | Waiting time for a Ranging Response packet. This object MUST NOT persist at reinitialization of the managed system. |
| 1.3.6.1.2.1.10.127.1.2.2 | TabledocsIfCmStatusTable | not-accessible | current | This table maintains a number of status objects and counters for Cable Modems. |
| 1.3.6.1.2.1.10.127.1.2.2.1 | RowdocsIfCmStatusEntry | not-accessible | current | A set of status objects and counters for a single MAC layer instance in Cable Modem. An entry in this table exists for each ifEntry with an ifType of docsCable… |
| 1.3.6.1.2.1.10.127.1.2.2.1.1 | ColumndocsIfCmStatusValue | read-only | current | Current Cable Modem connectivity state, as specified in the RF Interface Specification. Interpretations for state values 1-12 are clearly outlined in the SP-RF… |
| 1.3.6.1.2.1.10.127.1.2.2.1.2 | ColumndocsIfCmStatusCode | read-only | current | Status code for a Cable Modem as defined in the OSSI Specification. The status code consists of a single character indicating error groups, followed by a two- … |
| 1.3.6.1.2.1.10.127.1.2.2.1.3 | ColumndocsIfCmStatusTxPower | read-only | current | The operational transmit power for the attached upstream channel. |
| 1.3.6.1.2.1.10.127.1.2.2.1.4 | ColumndocsIfCmStatusResets | read-only | current | Number of times the CM reset or initialized this interface. Discontinuities in the value of this counter can occur at reinitialization of the managed system, a… |
| 1.3.6.1.2.1.10.127.1.2.2.1.5 | ColumndocsIfCmStatusLostSyncs | read-only | current | Number of times the CM lost synchronization with the downstream channel. Discontinuities in the value of this counter can occur at reinitialization of the mana… |
| 1.3.6.1.2.1.10.127.1.2.2.1.6 | ColumndocsIfCmStatusInvalidMaps | read-only | current | Number of times the CM received invalid MAP messages. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at … |
| 1.3.6.1.2.1.10.127.1.2.2.1.7 | ColumndocsIfCmStatusInvalidUcds | read-only | current | Number of times the CM received invalid UCD messages. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at … |
| 1.3.6.1.2.1.10.127.1.2.2.1.8 | ColumndocsIfCmStatusInvalidRangingResponses | read-only | current | Number of times the CM received invalid ranging response messages. Discontinuities in the value of this counter can occur at reinitialization of the managed sy… |
| 1.3.6.1.2.1.10.127.1.2.2.1.9 | ColumndocsIfCmStatusInvalidRegistrationResponses | read-only | current | Number of times the CM received invalid registration response messages. Discontinuities in the value of this counter can occur at reinitialization of the manag… |
| 1.3.6.1.2.1.10.127.1.2.2.1.10 | ColumndocsIfCmStatusT1Timeouts | read-only | current | Number of times counter T1 expired in the CM. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other ti… |
| 1.3.6.1.2.1.10.127.1.2.2.1.11 | ColumndocsIfCmStatusT2Timeouts | read-only | current | Number of times counter T2 expired in the CM. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other ti… |
| 1.3.6.1.2.1.10.127.1.2.2.1.12 | ColumndocsIfCmStatusT3Timeouts | read-only | current | Number of times counter T3 expired in the CM. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other ti… |
| 1.3.6.1.2.1.10.127.1.2.2.1.13 | ColumndocsIfCmStatusT4Timeouts | read-only | current | Number of times counter T4 expired in the CM. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other ti… |
| 1.3.6.1.2.1.10.127.1.2.2.1.14 | ColumndocsIfCmStatusRangingAborteds | read-only | current | Number of times the ranging process was aborted by the CMTS. Discontinuities in the value of this counter can occur at reinitialization of the managed system, … |
| 1.3.6.1.2.1.10.127.1.2.2.1.15 | ColumndocsIfCmStatusDocsisOperMode | read-only | current | Indication of whether the device has registered using 1.0 Class of Service or 1.1 Quality of Service. An unregistered CM SHOULD indicate 'docsis11' for a docsI… |
| 1.3.6.1.2.1.10.127.1.2.2.1.16 | ColumndocsIfCmStatusModulationType | read-only | current | Indicates modulation type status currently used by the CM. Since this object specifically identifies PHY mode, the shared upstream channel type is not permitte… |
| 1.3.6.1.2.1.10.127.1.2.2.1.17 | ColumndocsIfCmStatusEqualizationData | read-only | current | Pre-equalization data for this CM after convolution with data indicated in the RNG-RSP. This data is valid when docsIfUpChannelPreEqEnable is set to true. |
| 1.3.6.1.2.1.10.127.1.2.2.1.18 | ColumndocsIfCmStatusUCCs | read-only | current | The number of successful Upstream Channel Change transactions. Discontinuities in the value of this counter can occur at reinitialization of the managed system… |
| 1.3.6.1.2.1.10.127.1.2.2.1.19 | ColumndocsIfCmStatusUCCFails | read-only | current | The number of failed Upstream Channel Change transactions. Discontinuities in the value of this counter can occur at reinitialization of the managed system, an… |
| 1.3.6.1.2.1.10.127.1.2.3 | TabledocsIfCmServiceTable | not-accessible | current | Describes the attributes of each upstream service queue on a CM. |
| 1.3.6.1.2.1.10.127.1.2.3.1 | RowdocsIfCmServiceEntry | not-accessible | current | Describes the attributes of an upstream bandwidth service queue. An entry in this table exists for each Service ID. The primary index is an ifIndex with an ifT… |
| 1.3.6.1.2.1.10.127.1.2.3.1.1 | ColumndocsIfCmServiceId | not-accessible | current | Identifies a service queue for upstream bandwidth. The attributes of this service queue are shared between the CM and the CMTS. The CMTS allocates upstream ban… |
| 1.3.6.1.2.1.10.127.1.2.3.1.2 | ColumndocsIfCmServiceQosProfile | read-only | current | The index in docsIfQosProfileTable describing the quality of service attributes associated with this particular service. If no associated entry in docsIfQosPro… |
| 1.3.6.1.2.1.10.127.1.2.3.1.3 | ColumndocsIfCmServiceTxSlotsImmed | read-only | current | The number of upstream mini-slots that have been used to transmit data PDUs in immediate (contention) mode. This includes only those PDUs that are presumed to … |
| 1.3.6.1.2.1.10.127.1.2.3.1.4 | ColumndocsIfCmServiceTxSlotsDed | read-only | current | The number of upstream mini-slots that have been used to transmit data PDUs in dedicated mode (i.e., as a result of a unicast Data Grant). Discontinuities in t… |
| 1.3.6.1.2.1.10.127.1.2.3.1.5 | ColumndocsIfCmServiceTxRetries | read-only | current | The number of attempts to transmit data PDUs containing requests for acknowledgment that did not result in acknowledgment. Discontinuities in the value of this… |
| 1.3.6.1.2.1.10.127.1.2.3.1.6 | ColumndocsIfCmServiceTxExceededs | read-only | current | The number of data PDU transmission failures due to excessive retries without acknowledgment. Discontinuities in the value of this counter can occur at reiniti… |
| 1.3.6.1.2.1.10.127.1.2.3.1.7 | ColumndocsIfCmServiceRqRetries | read-only | current | The number of attempts to transmit bandwidth requests that did not result in acknowledgment. Discontinuities in the value of this counter can occur at reinitia… |
| 1.3.6.1.2.1.10.127.1.2.3.1.8 | ColumndocsIfCmServiceRqExceededs | read-only | current | The number of requests for bandwidth that failed due to excessive retries without acknowledgment. Discontinuities in the value of this counter can occur at rei… |
| 1.3.6.1.2.1.10.127.1.2.3.1.9 | ColumndocsIfCmServiceExtTxSlotsImmed | read-only | current | The number of upstream mini-slots that have been used to transmit data PDUs in immediate (contention) mode. This includes only those PDUs that are presumed to … |
| 1.3.6.1.2.1.10.127.1.2.3.1.10 | ColumndocsIfCmServiceExtTxSlotsDed | read-only | current | The number of upstream mini-slots that have been used to transmit data PDUs in dedicated mode (i.e., as a result of a unicast Data Grant). Discontinuities in t… |
| 1.3.6.1.2.1.10.127.1.3 | NodedocsIfCmtsObjects | |||
| 1.3.6.1.2.1.10.127.1.3.1 | TabledocsIfCmtsMacTable | not-accessible | current | Describes the attributes of each CMTS MAC interface, extending the information available from ifEntry. Mandatory for all CMTS devices. |
| 1.3.6.1.2.1.10.127.1.3.1.1 | RowdocsIfCmtsMacEntry | not-accessible | current | An entry containing objects describing attributes of each MAC entry, extending the information in ifEntry. An entry in this table exists for each ifEntry with … |
| 1.3.6.1.2.1.10.127.1.3.1.1.1 | ColumndocsIfCmtsCapabilities | read-only | current | Identifies the capabilities of the CMTS MAC implementation at this interface. Note that packet transmission is always supported. Therefore, there is no specifi… |
| 1.3.6.1.2.1.10.127.1.3.1.1.2 | ColumndocsIfCmtsSyncInterval | read-write | current | The interval between CMTS transmission of successive SYNC messages at this interface. |
| 1.3.6.1.2.1.10.127.1.3.1.1.3 | ColumndocsIfCmtsUcdInterval | read-write | current | The interval between CMTS transmission of successive Upstream Channel Descriptor messages for each upstream channel at this interface. |
| 1.3.6.1.2.1.10.127.1.3.1.1.4 | ColumndocsIfCmtsMaxServiceIds | read-only | current | The maximum number of service IDs that may be simultaneously active. |
| 1.3.6.1.2.1.10.127.1.3.1.1.5 | ColumndocsIfCmtsInsertionInterval | read-write | obsolete | The amount of time to elapse between each broadcast initial maintenance grant. Broadcast initial maintenance grants are used to allow new cable modems to join … |
| 1.3.6.1.2.1.10.127.1.3.1.1.6 | ColumndocsIfCmtsInvitedRangingAttempts | read-write | current | The maximum number of attempts to make on invitations for ranging requests. A value of zero means the system SHOULD attempt to range forever. |
| 1.3.6.1.2.1.10.127.1.3.1.1.7 | ColumndocsIfCmtsInsertInterval | read-write | current | The amount of time to elapse between each broadcast initial maintenance grant. Broadcast initial maintenance grants are used to allow new cable modems to join … |
| 1.3.6.1.2.1.10.127.1.3.1.1.8 | ColumndocsIfCmtsMacStorageType | read-only | current | The storage type for this conceptual row. Entries with this object set to permanent(4) do not require write operations for read-write objects. |
| 1.3.6.1.2.1.10.127.1.3.2 | TabledocsIfCmtsStatusTable | not-accessible | current | For the MAC layer, this group maintains a number of status objects and counters. |
| 1.3.6.1.2.1.10.127.1.3.2.1 | RowdocsIfCmtsStatusEntry | not-accessible | current | Status entry for a single MAC layer. An entry in this table exists for each ifEntry with an ifType of docsCableMaclayer(127). |
| 1.3.6.1.2.1.10.127.1.3.2.1.1 | ColumndocsIfCmtsStatusInvalidRangeReqs | read-only | current | This object counts invalid RNG-REQ messages received on this interface. Discontinuities in the value of this counter can occur at reinitialization of the manag… |
| 1.3.6.1.2.1.10.127.1.3.2.1.2 | ColumndocsIfCmtsStatusRangingAborteds | read-only | current | This object counts ranging attempts that were explicitly aborted by the CMTS. Discontinuities in the value of this counter can occur at reinitialization of the… |
| 1.3.6.1.2.1.10.127.1.3.2.1.3 | ColumndocsIfCmtsStatusInvalidRegReqs | read-only | current | This object counts invalid REG-REQ messages received on this interface; that is, syntax, out of range parameters, or erroneous requests. Discontinuities in the… |
| 1.3.6.1.2.1.10.127.1.3.2.1.4 | ColumndocsIfCmtsStatusFailedRegReqs | read-only | current | This object counts failed registration attempts. Included are docsIfCmtsStatusInvalidRegReqs, authentication, and class of service failures. Discontinuities in… |
| 1.3.6.1.2.1.10.127.1.3.2.1.5 | ColumndocsIfCmtsStatusInvalidDataReqs | read-only | current | This object counts invalid data request messages received on this interface. Discontinuities in the value of this counter can occur at reinitialization of the … |
| 1.3.6.1.2.1.10.127.1.3.2.1.6 | ColumndocsIfCmtsStatusT5Timeouts | read-only | current | This object counts the number of times counter T5 expired on this interface. Discontinuities in the value of this counter can occur at reinitialization of the … |
| 1.3.6.1.2.1.10.127.1.3.3 | TabledocsIfCmtsCmStatusTable | not-accessible | current | A set of objects in the CMTS, maintained for each cable modem connected to this CMTS. |
| 1.3.6.1.2.1.10.127.1.3.3.1 | RowdocsIfCmtsCmStatusEntry | not-accessible | current | Status information for a single cable modem. An entry in this table exists for each cable modem that is connected to the CMTS implementing this table. |
| 1.3.6.1.2.1.10.127.1.3.3.1.1 | ColumndocsIfCmtsCmStatusIndex | not-accessible | current | Index value to uniquely identify an entry in this table. For an individual cable modem, this index value SHOULD NOT change during CMTS uptime. |
| 1.3.6.1.2.1.10.127.1.3.3.1.2 | ColumndocsIfCmtsCmStatusMacAddress | read-only | current | MAC address of the cable modem. If the cable modem has multiple MAC addresses, this is the MAC address associated with the Cable interface. |
| 1.3.6.1.2.1.10.127.1.3.3.1.3 | ColumndocsIfCmtsCmStatusIpAddress | read-only | deprecated | IP address of this cable modem. If the cable modem has no IP address assigned, or the IP address is unknown, this object returns a value of 0.0.0.0. If the cab… |
| 1.3.6.1.2.1.10.127.1.3.3.1.4 | ColumndocsIfCmtsCmStatusDownChannelIfIndex | read-only | current | IfIndex of the downstream channel that this CM is connected to. If the downstream channel is unknown, this object returns a value of zero. |
| 1.3.6.1.2.1.10.127.1.3.3.1.5 | ColumndocsIfCmtsCmStatusUpChannelIfIndex | read-only | current | For DOCSIS 2.0, indicates the ifIndex of the logical upstream channel (ifType 205) this CM is connected to. For DOCSIS 1.x, indicates the ifIndex of the upstre… |
| 1.3.6.1.2.1.10.127.1.3.3.1.6 | ColumndocsIfCmtsCmStatusRxPower | read-only | current | The receive power as perceived for upstream data from this cable modem. If the receive power is unknown, this object returns a value of zero. |
| 1.3.6.1.2.1.10.127.1.3.3.1.7 | ColumndocsIfCmtsCmStatusTimingOffset | read-only | current | A measure of the current round trip time for this CM. Used for timing of CM upstream transmissions to ensure synchronized arrivals at the CMTS. Units are in te… |
| 1.3.6.1.2.1.10.127.1.3.3.1.8 | ColumndocsIfCmtsCmStatusEqualizationData | read-only | current | Equalization data for this CM, as measured by the CMTS. Returns the zero-length OCTET STRING if the value is unknown or if there is no equalization data availa… |
| 1.3.6.1.2.1.10.127.1.3.3.1.9 | ColumndocsIfCmtsCmStatusValue | read-only | current | Current cable modem connectivity state, as specified in the RF Interface Specification. Returned status information is the CM status, as assumed by the CMTS, a… |
| 1.3.6.1.2.1.10.127.1.3.3.1.10 | ColumndocsIfCmtsCmStatusUnerroreds | read-only | current | Codewords received without error from this cable modem. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and a… |
| 1.3.6.1.2.1.10.127.1.3.3.1.11 | ColumndocsIfCmtsCmStatusCorrecteds | read-only | current | Codewords received with correctable errors from this cable modem. Discontinuities in the value of this counter can occur at reinitialization of the managed sys… |
| 1.3.6.1.2.1.10.127.1.3.3.1.12 | ColumndocsIfCmtsCmStatusUncorrectables | read-only | current | Codewords received with uncorrectable errors from this cable modem. Discontinuities in the value of this counter can occur at reinitialization of the managed s… |
| 1.3.6.1.2.1.10.127.1.3.3.1.13 | ColumndocsIfCmtsCmStatusSignalNoise | read-only | current | Signal/Noise ratio as perceived for upstream data from this cable modem. If the Signal/Noise is unknown, this object returns a value of zero. |
| 1.3.6.1.2.1.10.127.1.3.3.1.14 | ColumndocsIfCmtsCmStatusMicroreflections | read-only | current | Total microreflections, including in-channel response as perceived on this interface, measured in dBc below the signal level. This object is not assumed to ret… |
| 1.3.6.1.2.1.10.127.1.3.3.1.15 | ColumndocsIfCmtsCmStatusExtUnerroreds | read-only | current | Codewords received without error from this cable modem. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and a… |
| 1.3.6.1.2.1.10.127.1.3.3.1.16 | ColumndocsIfCmtsCmStatusExtCorrecteds | read-only | current | Codewords received with correctable errors from this cable modem. Discontinuities in the value of this counter can occur at reinitialization of the managed sys… |
| 1.3.6.1.2.1.10.127.1.3.3.1.17 | ColumndocsIfCmtsCmStatusExtUncorrectables | read-only | current | Codewords received with uncorrectable errors from this cable modem. Discontinuities in the value of this counter can occur at reinitialization of the managed s… |
| 1.3.6.1.2.1.10.127.1.3.3.1.18 | ColumndocsIfCmtsCmStatusDocsisRegMode | read-only | current | Indication of whether the CM has registered using 1.0 Class of Service or 1.1 Quality of Service. |
| 1.3.6.1.2.1.10.127.1.3.3.1.19 | ColumndocsIfCmtsCmStatusModulationType | read-only | current | Indicates modulation type currently used by the CM. Since this object specifically identifies PHY mode, the shared type is not permitted. If the upstream chann… |
| 1.3.6.1.2.1.10.127.1.3.3.1.20 | ColumndocsIfCmtsCmStatusInetAddressType | read-only | current | The type of internet address of docsIfCmtsCmStatusInetAddress. If the cable modem internet address is unassigned or unknown, then the value of this object is u… |
| 1.3.6.1.2.1.10.127.1.3.3.1.21 | ColumndocsIfCmtsCmStatusInetAddress | read-only | current | Internet address of this cable modem. If the Cable Modem has no Internet address assigned, or the Internet address is unknown, the value of this object is the … |
| 1.3.6.1.2.1.10.127.1.3.3.1.22 | ColumndocsIfCmtsCmStatusValueLastUpdate | read-only | current | The value of sysUpTime when docsIfCmtsCmStatusValue was last updated. |
| 1.3.6.1.2.1.10.127.1.3.3.1.23 | ColumndocsIfCmtsCmStatusHighResolutionTimingOffset | read-only | current | A measure of the current round trip time for this CM. Used for timing of CM upstream transmissions to ensure synchronized arrivals at the CMTS. Units are in te… |
| 1.3.6.1.2.1.10.127.1.3.4 | TabledocsIfCmtsServiceTable | not-accessible | current | Describes the attributes of upstream service queues in a Cable Modem Termination System. |
| 1.3.6.1.2.1.10.127.1.3.4.1 | RowdocsIfCmtsServiceEntry | not-accessible | current | Describes the attributes of a single upstream bandwidth service queue. Entries in this table exist for each ifEntry with an ifType of docsCableMaclayer(127), a… |
| 1.3.6.1.2.1.10.127.1.3.4.1.1 | ColumndocsIfCmtsServiceId | not-accessible | current | Identifies a service queue for upstream bandwidth. The attributes of this service queue are shared between the Cable Modem and the Cable Modem Termination Syst… |
| 1.3.6.1.2.1.10.127.1.3.4.1.2 | ColumndocsIfCmtsServiceCmStatusIndex | read-only | deprecated | Pointer to an entry in docsIfCmtsCmStatusTable identifying the cable modem using this Service Queue. If multiple cable modems are using this Service Queue, the… |
| 1.3.6.1.2.1.10.127.1.3.4.1.3 | ColumndocsIfCmtsServiceAdminStatus | read-write | current | Allows a service class for a particular modem to be suppressed, (re-)enabled, or deleted altogether. |
| 1.3.6.1.2.1.10.127.1.3.4.1.4 | ColumndocsIfCmtsServiceQosProfile | read-only | current | The index in docsIfQosProfileTable describing the quality of service attributes associated with this particular service. If no associated docsIfQosProfileTable… |
| 1.3.6.1.2.1.10.127.1.3.4.1.5 | ColumndocsIfCmtsServiceCreateTime | read-only | current | The value of sysUpTime when this entry was created. |
| 1.3.6.1.2.1.10.127.1.3.4.1.6 | ColumndocsIfCmtsServiceInOctets | read-only | current | The cumulative number of Packet Data octets received on this Service ID. The count does not include the size of the Cable MAC header. Discontinuities in the va… |
| 1.3.6.1.2.1.10.127.1.3.4.1.7 | ColumndocsIfCmtsServiceInPackets | read-only | current | The cumulative number of Packet Data packets received on this Service ID. Discontinuities in the value of this counter can occur at reinitialization of the man… |
| 1.3.6.1.2.1.10.127.1.3.4.1.8 | ColumndocsIfCmtsServiceNewCmStatusIndex | read-only | current | Pointer (via docsIfCmtsCmStatusIndex) to an entry in docsIfCmtsCmStatusTable identifying the cable modem using this Service Queue. If multiple cable modems are… |
| 1.3.6.1.2.1.10.127.1.3.5 | TabledocsIfCmtsModulationTable | not-accessible | current | Describes a modulation profile associated with one or more upstream channels. |
| 1.3.6.1.2.1.10.127.1.3.5.1 | RowdocsIfCmtsModulationEntry | not-accessible | current | Describes a modulation profile for an Interval Usage Code for one or more upstream channels. Entries in this table are created by the operator. Initial default… |
| 1.3.6.1.2.1.10.127.1.3.5.1.1 | ColumndocsIfCmtsModIndex | not-accessible | current | An index into the Channel Modulation table representing a group of Interval Usage Codes, all associated with the same channel. |
| 1.3.6.1.2.1.10.127.1.3.5.1.2 | ColumndocsIfCmtsModIntervalUsageCode | not-accessible | current | An index into the Channel Modulation table that, when grouped with other Interval Usage Codes, fully instantiates all modulation sets for a given upstream chan… |
| 1.3.6.1.2.1.10.127.1.3.5.1.3 | ColumndocsIfCmtsModControl | read-create | current | Controls and reflects the status of rows in this table. There is no restriction on the changing of values in this table while their associated rows are active,… |
| 1.3.6.1.2.1.10.127.1.3.5.1.4 | ColumndocsIfCmtsModType | read-create | current | The modulation type used on this channel. Returns other(1) if the modulation type is not qpsk, qam16, qam8, qam32, qam64, or qam128. Type qam128 is used for SC… |
| 1.3.6.1.2.1.10.127.1.3.5.1.5 | ColumndocsIfCmtsModPreambleLen | read-create | current | The preamble length for this modulation profile in bits. Default value is the minimum needed by the implementation at the CMTS for the given modulation profile. |
| 1.3.6.1.2.1.10.127.1.3.5.1.6 | ColumndocsIfCmtsModDifferentialEncoding | read-create | current | Specifies whether or not differential encoding is used on this channel. |
| 1.3.6.1.2.1.10.127.1.3.5.1.7 | ColumndocsIfCmtsModFECErrorCorrection | read-create | current | The number of correctable errored bytes (t) used in forward error correction code. The value of 0 indicates that no correction is employed. The number of check… |
| 1.3.6.1.2.1.10.127.1.3.5.1.8 | ColumndocsIfCmtsModFECCodewordLength | read-create | current | The number of data bytes (k) in the forward error correction codeword. This object is not used if docsIfCmtsModFECErrorCorrection is zero. |
| 1.3.6.1.2.1.10.127.1.3.5.1.9 | ColumndocsIfCmtsModScramblerSeed | read-create | current | The 15-bit seed value for the scrambler polynomial. |
| 1.3.6.1.2.1.10.127.1.3.5.1.10 | ColumndocsIfCmtsModMaxBurstSize | read-create | current | The maximum number of mini-slots that can be transmitted during this channel's burst time. Returns zero if the burst length is bounded by the allocation MAP ra… |
| 1.3.6.1.2.1.10.127.1.3.5.1.11 | ColumndocsIfCmtsModGuardTimeSize | read-only | current | The number of symbol-times that MUST follow the end of this channel's burst. Default value is the minimum time needed by the implementation for this modulation… |
| 1.3.6.1.2.1.10.127.1.3.5.1.12 | ColumndocsIfCmtsModLastCodewordShortened | read-create | current | Indicates whether the last FEC codeword is truncated. |
| 1.3.6.1.2.1.10.127.1.3.5.1.13 | ColumndocsIfCmtsModScrambler | read-create | current | Indicates whether the scrambler is employed. |
| 1.3.6.1.2.1.10.127.1.3.5.1.14 | ColumndocsIfCmtsModByteInterleaverDepth | read-create | current | ATDMA Byte Interleaver Depth (Ir). This object returns 1 for non-ATDMA profiles. |
| 1.3.6.1.2.1.10.127.1.3.5.1.15 | ColumndocsIfCmtsModByteInterleaverBlockSize | read-create | current | ATDMA Byte Interleaver Block size (Br). This object returns zero for non-ATDMA profiles |
| 1.3.6.1.2.1.10.127.1.3.5.1.16 | ColumndocsIfCmtsModPreambleType | read-create | current | Preamble type for DOCSIS 2.0 bursts. The value 'unknown(0)' represents a row entry consisting only of DOCSIS 1.x bursts |
| 1.3.6.1.2.1.10.127.1.3.5.1.17 | ColumndocsIfCmtsModTcmErrorCorrectionOn | read-create | current | Trellis Code Modulation (TCM) On/Off. This value returns false for non-S-CDMA profiles. |
| 1.3.6.1.2.1.10.127.1.3.5.1.18 | ColumndocsIfCmtsModScdmaInterleaverStepSize | read-create | current | S-CDMA Interleaver step size. This value returns zero for non-S-CDMA profiles. |
| 1.3.6.1.2.1.10.127.1.3.5.1.19 | ColumndocsIfCmtsModScdmaSpreaderEnable | read-create | current | S-CDMA spreader. This value returns false for non-S-CDMA profiles. Default value for IUC 3 and 4 is OFF; for all other IUCs it is ON. |
| 1.3.6.1.2.1.10.127.1.3.5.1.20 | ColumndocsIfCmtsModScdmaSubframeCodes | read-create | current | S-CDMA sub-frame size. This value returns zero for non-S-CDMA profiles. |
| 1.3.6.1.2.1.10.127.1.3.5.1.21 | ColumndocsIfCmtsModChannelType | read-create | current | Describes the modulation channel type for this modulation entry. All the active entries in a modulation profile (that is all active entries that share a common… |
| 1.3.6.1.2.1.10.127.1.3.5.1.22 | ColumndocsIfCmtsModStorageType | read-only | current | The storage type for this conceptual row. Entries with this object set to permanent(4) do not require write operations for read-write objects. |
| 1.3.6.1.2.1.10.127.1.3.6 | ScalardocsIfCmtsQosProfilePermissions | read-write | current | This object specifies permitted methods of creating entries in docsIfQosProfileTable. createByManagement(0) is set if entries can be created using SNMP. update… |
| 1.3.6.1.2.1.10.127.1.3.7 | TabledocsIfCmtsMacToCmTable | not-accessible | current | This is a table to provide a quick access index into the docsIfCmtsCmStatusTable. There is exactly one row in this table for each row in the docsIfCmtsCmStatus… |
| 1.3.6.1.2.1.10.127.1.3.7.1 | RowdocsIfCmtsMacToCmEntry | not-accessible | current | A row in the docsIfCmtsMacToCmTable. An entry in this table exists for each cable modem that is connected to the CMTS implementing this table. |
| 1.3.6.1.2.1.10.127.1.3.7.1.1 | ColumndocsIfCmtsCmMac | not-accessible | current | The RF side MAC address for the referenced CM (e.g., the interface on the CM that has docsCableMacLayer(127) as its ifType). |
| 1.3.6.1.2.1.10.127.1.3.7.1.2 | ColumndocsIfCmtsCmPtr | read-only | current | An row index into docsIfCmtsCmStatusTable. When queried with the correct instance value (e.g., a CM's MAC address), returns the index in docsIfCmtsCmStatusTabl… |
| 1.3.6.1.2.1.10.127.1.3.8 | ScalardocsIfCmtsChannelUtilizationInterval | read-write | current | The time interval in seconds over which the channel utilization index is calculated. All upstream/downstream channels use the same docsIfCmtsChannelUtilization… |
| 1.3.6.1.2.1.10.127.1.3.9 | TabledocsIfCmtsChannelUtilizationTable | not-accessible | current | Reports utilization statistics for attached upstream and downstream physical channels. |
| 1.3.6.1.2.1.10.127.1.3.9.1 | RowdocsIfCmtsChannelUtilizationEntry | not-accessible | current | Utilization statistics for a single upstream or downstream physical channel. An entry exists in this table for each ifEntry with an ifType equal to docsCableDo… |
| 1.3.6.1.2.1.10.127.1.3.9.1.1 | ColumndocsIfCmtsChannelUtIfType | not-accessible | current | The secondary index into this table. Indicates the IANA interface type associated with this physical channel. Only docsCableDownstream (128) and docsCableUpstr… |
| 1.3.6.1.2.1.10.127.1.3.9.1.2 | ColumndocsIfCmtsChannelUtId | not-accessible | current | The tertiary index into this table. Indicates the CMTS identifier for this physical channel. |
| 1.3.6.1.2.1.10.127.1.3.9.1.3 | ColumndocsIfCmtsChannelUtUtilization | read-only | current | The calculated and truncated utilization index for this physical upstream or downstream channel, accurate as of the most recent docsIfCmtsChannelUtilizationInt… |
| 1.3.6.1.2.1.10.127.1.3.10 | TabledocsIfCmtsDownChannelCounterTable | not-accessible | current | This table is implemented at the CMTS to collect downstream channel statistics for utilization calculations. |
| 1.3.6.1.2.1.10.127.1.3.10.1 | RowdocsIfCmtsDownChannelCounterEntry | not-accessible | current | An entry provides a list of traffic counters for a single downstream channel. An entry in this table exists for each ifEntry with an ifType of docsCableDownstr… |
| 1.3.6.1.2.1.10.127.1.3.10.1.1 | ColumndocsIfCmtsDownChnlCtrId | read-only | current | The Cable Modem Termination System identification of the downstream channel within this particular MAC interface. If the interface is down, the object returns … |
| 1.3.6.1.2.1.10.127.1.3.10.1.2 | ColumndocsIfCmtsDownChnlCtrTotalBytes | read-only | current | At the CMTS, the total number of bytes in the Payload portion of MPEG Packets (i.e., not including MPEG header or pointer_field) transported by this downstream… |
| 1.3.6.1.2.1.10.127.1.3.10.1.3 | ColumndocsIfCmtsDownChnlCtrUsedBytes | read-only | current | At the CMTS, the total number of DOCSIS data bytes transported by this downstream channel. The number of data bytes is defined as the total number of bytes tra… |
| 1.3.6.1.2.1.10.127.1.3.10.1.4 | ColumndocsIfCmtsDownChnlCtrExtTotalBytes | read-only | current | At the CMTS, the total number of bytes in the Payload portion of MPEG Packets (i.e., not including MPEG header or pointer_field) transported by this downstream… |
| 1.3.6.1.2.1.10.127.1.3.10.1.5 | ColumndocsIfCmtsDownChnlCtrExtUsedBytes | read-only | current | At the CMTS, the total number of DOCSIS data bytes transported by this downstream channel. The number of data bytes is defined as the total number of bytes tra… |
| 1.3.6.1.2.1.10.127.1.3.11 | TabledocsIfCmtsUpChannelCounterTable | not-accessible | current | This table is implemented at the CMTS to provide upstream channel statistics appropriate for channel utilization calculations. |
| 1.3.6.1.2.1.10.127.1.3.11.1 | RowdocsIfCmtsUpChannelCounterEntry | not-accessible | current | List of traffic statistics for a single upstream channel. For DOCSIS 2.0 CMTSs, an entry in this table exists for each ifEntry with an ifType of docsCableUpstr… |
| 1.3.6.1.2.1.10.127.1.3.11.1.1 | ColumndocsIfCmtsUpChnlCtrId | read-only | current | The CMTS identification of the upstream channel. |
| 1.3.6.1.2.1.10.127.1.3.11.1.2 | ColumndocsIfCmtsUpChnlCtrTotalMslots | read-only | current | Current count, from CMTS initialization, of all mini-slots defined for this upstream logical channel. This count includes all IUCs and SIDs, even those allocat… |
| 1.3.6.1.2.1.10.127.1.3.11.1.3 | ColumndocsIfCmtsUpChnlCtrUcastGrantedMslots | read-only | current | Current count, from CMTS initialization, of unicast granted mini-slots on the upstream logical channel, regardless of burst type. Unicast granted mini-slots ar… |
| 1.3.6.1.2.1.10.127.1.3.11.1.4 | ColumndocsIfCmtsUpChnlCtrTotalCntnMslots | read-only | current | Current count, from CMTS initialization, of contention mini-slots defined for this upstream logical channel. This count includes all mini-slots assigned to a b… |
| 1.3.6.1.2.1.10.127.1.3.11.1.5 | ColumndocsIfCmtsUpChnlCtrUsedCntnMslots | read-only | current | Current count, from CMTS initialization, of contention mini-slots utilized on the upstream logical channel. For contention regions, utilized mini-slots are tho… |
| 1.3.6.1.2.1.10.127.1.3.11.1.6 | ColumndocsIfCmtsUpChnlCtrExtTotalMslots | read-only | current | Current count, from CMTS initialization, of all mini-slots defined for this upstream logical channel. This count includes all IUCs and SIDs, even those allocat… |
| 1.3.6.1.2.1.10.127.1.3.11.1.7 | ColumndocsIfCmtsUpChnlCtrExtUcastGrantedMslots | read-only | current | Current count, from CMTS initialization, of unicast granted mini-slots on the upstream logical channel, regardless of burst type. Unicast granted mini-slots ar… |
| 1.3.6.1.2.1.10.127.1.3.11.1.8 | ColumndocsIfCmtsUpChnlCtrExtTotalCntnMslots | read-only | current | Current count, from CMTS initialization, of contention mini-slots defined for this upstream logical channel. This count includes all mini-slots assigned to a b… |
| 1.3.6.1.2.1.10.127.1.3.11.1.9 | ColumndocsIfCmtsUpChnlCtrExtUsedCntnMslots | read-only | current | Current count, from CMTS initialization, of contention mini-slots utilized on the upstream logical channel. For contention regions, utilized mini-slots are tho… |
| 1.3.6.1.2.1.10.127.1.3.11.1.10 | ColumndocsIfCmtsUpChnlCtrCollCntnMslots | read-only | current | Current count, from CMTS initialization, of contention mini-slots subjected to collisions on the upstream logical channel. For contention regions, these are th… |
| 1.3.6.1.2.1.10.127.1.3.11.1.11 | ColumndocsIfCmtsUpChnlCtrTotalCntnReqMslots | read-only | current | Current count, from CMTS initialization, of contention request mini-slots defined for this upstream logical channel. This count includes all mini-slots for IUC… |
| 1.3.6.1.2.1.10.127.1.3.11.1.12 | ColumndocsIfCmtsUpChnlCtrUsedCntnReqMslots | read-only | current | Current count, from CMTS initialization, of contention request mini-slots utilized on this upstream logical channel. This count includes all contention mini-sl… |
| 1.3.6.1.2.1.10.127.1.3.11.1.13 | ColumndocsIfCmtsUpChnlCtrCollCntnReqMslots | read-only | current | Current count, from CMTS initialization, of contention request mini-slots subjected to collisions on this upstream logical channel. This includes all contentio… |
| 1.3.6.1.2.1.10.127.1.3.11.1.14 | ColumndocsIfCmtsUpChnlCtrTotalCntnReqDataMslots | read-only | current | Current count, from CMTS initialization, of contention request data mini-slots defined for this upstream logical channel. This count includes all mini-slots fo… |
| 1.3.6.1.2.1.10.127.1.3.11.1.15 | ColumndocsIfCmtsUpChnlCtrUsedCntnReqDataMslots | read-only | current | Current count, from CMTS initialization, of contention request data mini-slots utilized on this upstream logical channel. This includes all contention mini-slo… |
| 1.3.6.1.2.1.10.127.1.3.11.1.16 | ColumndocsIfCmtsUpChnlCtrCollCntnReqDataMslots | read-only | current | Current count, from CMTS initialization, of contention request data mini-slots subjected to collisions on this upstream logical channel. This includes all cont… |
| 1.3.6.1.2.1.10.127.1.3.11.1.17 | ColumndocsIfCmtsUpChnlCtrTotalCntnInitMaintMslots | read-only | current | Current count, from CMTS initialization, of contention initial maintenance mini-slots defined for this upstream logical channel. This includes all mini-slots f… |
| 1.3.6.1.2.1.10.127.1.3.11.1.18 | ColumndocsIfCmtsUpChnlCtrUsedCntnInitMaintMslots | read-only | current | Current count, from CMTS initialization, of contention initial maintenance mini-slots utilized on this upstream logical channel. This includes all contention m… |
| 1.3.6.1.2.1.10.127.1.3.11.1.19 | ColumndocsIfCmtsUpChnlCtrCollCntnInitMaintMslots | read-only | current | Current count, from CMTS initialization, of contention initial maintenance mini-slots subjected to collisions on this upstream logical channel. This includes a… |
| 1.3.6.1.2.1.10.127.1.3.11.1.20 | ColumndocsIfCmtsUpChnlCtrExtCollCntnMslots | read-only | current | Current count, from CMTS initialization, of collision contention mini-slots on the upstream logical channel. For contention regions, these are the mini-slots a… |
| 1.3.6.1.2.1.10.127.1.3.11.1.21 | ColumndocsIfCmtsUpChnlCtrExtTotalCntnReqMslots | read-only | current | Current count, from CMTS initialization, of contention request mini-slots defined for this upstream logical channel. This count includes all mini-slots for IUC… |
| 1.3.6.1.2.1.10.127.1.3.11.1.22 | ColumndocsIfCmtsUpChnlCtrExtUsedCntnReqMslots | read-only | current | Current count, from CMTS initialization, of contention request mini-slots utilized on this upstream logical channel. This count includes all contention mini-sl… |
| 1.3.6.1.2.1.10.127.1.3.11.1.23 | ColumndocsIfCmtsUpChnlCtrExtCollCntnReqMslots | read-only | current | Current count, from CMTS initialization, of contention request mini-slots subjected to collisions on this upstream logical channel. This includes all contentio… |
| 1.3.6.1.2.1.10.127.1.3.11.1.24 | ColumndocsIfCmtsUpChnlCtrExtTotalCntnReqDataMslots | read-only | current | Current count, from CMTS initialization, of contention request data mini-slots defined for this upstream logical channel. This count includes all mini-slots fo… |
| 1.3.6.1.2.1.10.127.1.3.11.1.25 | ColumndocsIfCmtsUpChnlCtrExtUsedCntnReqDataMslots | read-only | current | Current count, from CMTS initialization, of contention request data mini-slots utilized on this upstream logical channel. This includes all contention mini-slo… |
| 1.3.6.1.2.1.10.127.1.3.11.1.26 | ColumndocsIfCmtsUpChnlCtrExtCollCntnReqDataMslots | read-only | current | Current count, from CMTS initialization, of contention request data mini-slots subjected to collisions on this upstream logical channel. This includes all cont… |
| 1.3.6.1.2.1.10.127.1.3.11.1.27 | ColumndocsIfCmtsUpChnlCtrExtTotalCntnInitMaintMslots | read-only | current | Current count, from CMTS initialization, of initial maintenance mini-slots defined for this upstream logical channel. This count includes all mini-slots for IU… |
| 1.3.6.1.2.1.10.127.1.3.11.1.28 | ColumndocsIfCmtsUpChnlCtrExtUsedCntnInitMaintMslots | read-only | current | Current count, from CMTS initialization, of initial maintenance mini-slots utilized on this upstream logical channel. This includes all contention mini-slots f… |
| 1.3.6.1.2.1.10.127.1.3.11.1.29 | ColumndocsIfCmtsUpChnlCtrExtCollCntnInitMaintMslots | read-only | current | Current count, from CMTS initialization, of contention initial maintenance mini-slots subjected to collisions on this upstream logical channel. This includes a… |
| 1.3.6.1.2.1.10.127.2 | NodedocsIfNotification | |||
| 1.3.6.1.2.1.10.127.3 | NodedocsIfConformance | |||
| 1.3.6.1.2.1.10.127.3.1 | NodedocsIfCompliances | |||
| 1.3.6.1.2.1.10.127.3.1.1 | CompliancedocsIfBasicCompliance | read-only | deprecated | The compliance statement for devices that implement DOCSIS 1.x compliant Radio Frequency Interfaces. |
| 1.3.6.1.2.1.10.127.3.1.2 | CompliancedocsIfBasicComplianceV2 | read-only | current | The compliance statement for devices that implement DOCSIS 2.0 Radio Frequency Interfaces. |
| 1.3.6.1.2.1.10.127.3.2 | NodedocsIfGroups | |||
| 1.3.6.1.2.1.10.127.3.2.1 | GroupdocsIfBasicGroup | deprecated | Group of objects implemented in both cable modems and cable modem termination systems. | |
| 1.3.6.1.2.1.10.127.3.2.2 | GroupdocsIfCmGroup | deprecated | Group of objects implemented in cable modems. | |
| 1.3.6.1.2.1.10.127.3.2.3 | GroupdocsIfCmtsGroup | deprecated | Group of objects implemented in Cable Modem Termination Systems. | |
| 1.3.6.1.2.1.10.127.3.2.4 | GroupdocsIfObsoleteGroup | obsolete | Group of objects obsoleted. | |
| 1.3.6.1.2.1.10.127.3.2.5 | GroupdocsIfBasicGroupV2 | current | Group of objects implemented in both cable modems and cable modem termination systems. | |
| 1.3.6.1.2.1.10.127.3.2.6 | GroupdocsIfCmGroupV2 | current | Group of objects implemented in cable modems. | |
| 1.3.6.1.2.1.10.127.3.2.7 | GroupdocsIfCmtsGroupV2 | current | Group of objects implemented in Cable Modem Termination Systems. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DocsEqualizerData | OCTET STRING(SIZE (0 | 36..260)) | current | This data type represents the equalizer data as measured at the receiver interface. The format of the equalizer follows the structure of the Transmit Equalization Adjust RNG-RSP TLV of DOCSIS RFI v2.0 : 1 byte Main tap … |
| DocsisQosVersion | INTEGER { docsis10 (1), docsis11 (2) } | current | Indicates the referenced quality-of-service level. 'docsis10 refers to DOCSIS 1.0 Class of Service queuing services, and 'docsis11' refers to DOCSIS 1.1 Quality of Service. |
| DocsisUpstreamType | INTEGER { unknown(0), tdma(1), atdma(2), scdma(3), tdmaAndAtdma(4) } | current | Indicates the DOCSIS Upstream Channel Type. 'unknown' means information not available. 'tdma' is related to TDMA, Time Division Multiple Access; 'atdma' is related to A-TDMA, Advanced Time Division Multiple Access, 'scd… |
| DocsisVersion | INTEGER { docsis10 (1), docsis11 (2), docsis20 (3) } | current | Indicates the DOCSIS Radio Frequency specification being referenced. 'docsis10' indicates DOCSIS 1.0. 'docsis11' indicates DOCSIS 1.1. 'docsis20' indicates DOCSIS 2.0. |
| TenthdB | Integer32 | current | This data type represents power levels that are normally expressed in dB. Units are in tenths of a dB; for example, 5.1 dB will be represented as 51. |
| TenthdBmV | Integer32 | current | This data type represents power levels that are normally expressed in dBmV. Units are in tenths of a dBmV; for example, 5.1 dBmV will be represented as 51. |