DOCS-LEAK-DETECT-MIB
36 objects
This MIB module contains management objects for the management of DOCSIS 3.1 Leakeage Detection. Copyright 2021-2022 Cable Television Laboratories, Inc. All rights reserved.
Imported Objects
| CLAB-DEF-MIB | -- RFC 3411 clabProjDocsis |
| SNMP-FRAMEWORK-MIB | -- RFC 2580 SnmpAdminString |
| SNMPv2-CONF | -- RFC 2579 OBJECT-GROUP MODULE-COMPLIANCE |
| SNMPv2-SMI | Counter32 Counter64 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | -- RFC 2578 TruthValue DateAndTime MacAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4491.2.1.37 | IdentitydocsLeakDetectMib | This MIB module contains management objects for the management of DOCSIS 3.1 Leakeage Detection. Copyright 2021-2022 Cable Television Laboratories, Inc. All ri… | ||
| 1.3.6.1.4.1.4491.2.1.37.0 | NodedocsLeakDetNotifications | |||
| 1.3.6.1.4.1.4491.2.1.37.1 | NodedocsLeakDetObjects | |||
| 1.3.6.1.4.1.4491.2.1.37.1.1 | NodedocsLeakDetTestObjects | |||
| 1.3.6.1.4.1.4491.2.1.37.1.1.1 | NodedocsLeakDetTestCapabilities | |||
| 1.3.6.1.4.1.4491.2.1.37.1.1.1.1 | ScalardocsLeakDetTestSupportsNumBurstsNotReceived | read-only | current | This attribute reports the CCAP capability to report a count of Leakage Detection Testing Bursts it does not receive during a Leakage Detection Test Session. T… |
| 1.3.6.1.4.1.4491.2.1.37.1.1.2 | TabledocsLeakDetTestSessionStatusTable | not-accessible | current | The LeakageDetectionTestSessionStatus table reports the status of a specified Leakage Detection Test Session. Rows in this tabled are created and maintained by… |
| 1.3.6.1.4.1.4491.2.1.37.1.1.2.1 | RowdocsLeakDetTestSessionStatusEntry | not-accessible | current | The conceptual row of docsLeakDetTestSessionStatusTable. |
| 1.3.6.1.4.1.4491.2.1.37.1.1.2.1.1 | ColumndocsLeakDetTestSessionStatusSessionId | not-accessible | current | This key attribute uniquely identifies the Leakage Detection Test Session within the MAC domain. |
| 1.3.6.1.4.1.4491.2.1.37.1.1.2.1.2 | ColumndocsLeakDetTestSessionStatusSessionType | read-only | current | This attribute reports which type of Leakage Detection Test Session this instance was created as. - single(0) indicates the Session is comprised only of Test M… |
| 1.3.6.1.4.1.4491.2.1.37.1.1.2.1.3 | ColumndocsLeakDetTestSessionStatusStatus | read-only | current | This attribute reports the status of the Leakage Detection Test Session identified by the corresponding Session Id. - pending(0) indicates the Leakage Detectio… |
| 1.3.6.1.4.1.4491.2.1.37.1.1.2.1.4 | ColumndocsLeakDetTestSessionStatusStartTime | read-only | current | This attribute reports the date and time when the Session was configured to start. It is the same value as LeakageDetectionTestSessionCfg::StartTime for the sp… |
| 1.3.6.1.4.1.4491.2.1.37.1.1.2.1.5 | ColumndocsLeakDetTestSessionStatusStopTime | read-only | current | This attribute reports the date and time when the Session was configured to end. It is the same value as LeakageDetectionTestSessionCfg::StopTime for the speci… |
| 1.3.6.1.4.1.4491.2.1.37.1.1.3 | TabledocsLeakDetTestSessionStatsTable | not-accessible | current | The LeakageDetectionTestSessionStats table reports Leakage Detection Testing Session statistics for a specified Test Modem and Session. Rows in this table are … |
| 1.3.6.1.4.1.4491.2.1.37.1.1.3.1 | RowdocsLeakDetTestSessionStatsEntry | not-accessible | current | The conceptual row of docsLeakDetTestSessionStatsTable. |
| 1.3.6.1.4.1.4491.2.1.37.1.1.3.1.1 | ColumndocsLeakDetTestSessionStatsCmMacAddress | not-accessible | current | This key attribute identifies the Test Modem for which the Leakage Detection Test statistics are being requested. |
| 1.3.6.1.4.1.4491.2.1.37.1.1.3.1.2 | ColumndocsLeakDetTestSessionStatsNumBurstsGranted | read-only | current | This attribute is the count of total Leakage Detection Testing Burst grants the CCAP provided to the specified Test Modem during a specified Session. |
| 1.3.6.1.4.1.4491.2.1.37.1.1.3.1.3 | ColumndocsLeakDetTestSessionStatsNumBurstsNotReceived | read-only | current | This attribute is the count of granted Leakage Detection Testing Bursts the CCAP failed to receive from the specified Test Modem during a specified Session. |
| 1.3.6.1.4.1.4491.2.1.37.1.1.3.1.4 | ColumndocsLeakDetTestSessionStatsNumTestBytesReceived | read-only | current | This attribute is the count of total bytes the CCAP received from the specified Test Modem on the OUDP Testing SID during Leakage Detection Testing Bursts, dur… |
| 1.3.6.1.4.1.4491.2.1.37.1.1.4 | TabledocsLeakDetTestChannelStatusTable | not-accessible | current | The LeakageDetectionTestChannelStatus table reports the configuration of a specified upstream OFDMA channel. Rows in this table are created and maintained by t… |
| 1.3.6.1.4.1.4491.2.1.37.1.1.4.1 | RowdocsLeakDetTestChannelStatusEntry | not-accessible | current | The conceptual row of docsLeakDetTestChannelStatusTable. |
| 1.3.6.1.4.1.4491.2.1.37.1.1.4.1.1 | ColumndocsLeakDetTestChannelStatusInterfaceName | not-accessible | current | This key attribute is the interface name specifying an upstream OFDMA channel. |
| 1.3.6.1.4.1.4491.2.1.37.1.1.4.1.2 | ColumndocsLeakDetTestChannelStatusTestStartFreq | read-only | current | This attribute reports the lower boundary of the upstream OFDMA channel frequency spectrum over which Test Modems will transmit Leakage Detection Testing Burst… |
| 1.3.6.1.4.1.4491.2.1.37.1.1.4.1.3 | ColumndocsLeakDetTestChannelStatusTestEndFreq | read-only | current | This attribute reports the upper boundary of the upstream OFDMA channel frequency spectrum over which Test Modems will transmit Leakage Detection Testing Burst… |
| 1.3.6.1.4.1.4491.2.1.37.1.1.4.1.4 | ColumndocsLeakDetTestChannelStatusNumModemsCfg | read-only | current | This attribute provides the count of the number of modems that are configured for this session. When the modems are explicitly configured via the management in… |
| 1.3.6.1.4.1.4491.2.1.37.1.1.4.1.5 | ColumndocsLeakDetTestChannelStatusNumModemsActive | read-only | current | This attribute provides the count of the number of modems that are actively being scheduled by the CCAP for OUDP bursts for this session. This value may differ… |
| 1.3.6.1.4.1.4491.2.1.37.1.1.4.1.6 | ColumndocsLeakDetTestChannelStatusFirstSubcarrierId | read-only | current | This attribute reports the lowest subcarrierId that is on the lowest edge of the first minislot that the CCAP has selected for the testing of Leakage. This sub… |
| 1.3.6.1.4.1.4491.2.1.37.1.1.4.1.7 | ColumndocsLeakDetTestChannelStatusLastSubcarrierId | read-only | current | This attribute reports the highest subcarrierId that is on the highest edge of the last minislot that the CCAP has selected for the testing of Leakage. This su… |
| 1.3.6.1.4.1.4491.2.1.37.1.1.4.1.8 | ColumndocsLeakDetTestChannelStatusBurstIuc | read-only | current | This attribute provides the information regarding which BurstIuc is being used on this OFDMA channel for Leakage Detection Bursts and is used primarily for tro… |
| 1.3.6.1.4.1.4491.2.1.37.1.1.4.1.9 | ColumndocsLeakDetTestChannelStatusCurrCycleTime | read-only | current | This attribute communicates the current time that a single cycle takes to complete. This calculation takes into account the configured test parameters (Transmi… |
| 1.3.6.1.4.1.4491.2.1.37.1.1.4.1.10 | ColumndocsLeakDetTestChannelStatusNumBurstPositions | read-only | current | This attribute provides the count of the number of burst positions in a Leakage Detection Test Session whether they are scheduled or not. Unscheduled burst pos… |
| 1.3.6.1.4.1.4491.2.1.37.2 | NodedocsLeakDetConformance | |||
| 1.3.6.1.4.1.4491.2.1.37.2.1 | NodedocsLeakDetCompliances | |||
| 1.3.6.1.4.1.4491.2.1.37.2.1.1 | CompliancedocsLeakDetCompliance | current | The compliance statement of managed objects for Leakage Detection | |
| 1.3.6.1.4.1.4491.2.1.37.2.2 | NodedocsLeakDetGroups | |||
| 1.3.6.1.4.1.4491.2.1.37.2.2.1 | GroupdocsLeakDetTestGroup | current | Group of objects implemented for Leakage Detection Test |