DOT12-RPTR-MIB
97 objects
This MIB module describes objects for managing IEEE 802.12 repeaters.
Imported Objects
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 Integer32 mib-2 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | MacAddress TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.53 | IdentityvgRptrMIB | This MIB module describes objects for managing IEEE 802.12 repeaters. | ||
| 1.3.6.1.2.1.53.1 | NodevgRptrObjects | |||
| 1.3.6.1.2.1.53.1.1 | NodevgRptrBasic | |||
| 1.3.6.1.2.1.53.1.1.1 | NodevgRptrBasicRptr | |||
| 1.3.6.1.2.1.53.1.1.1.1 | TablevgRptrInfoTable | not-accessible | current | A table of information about each 802.12 repeater in the managed system. |
| 1.3.6.1.2.1.53.1.1.1.1.1 | RowvgRptrInfoEntry | not-accessible | current | An entry in the table, containing information about a single repeater. |
| 1.3.6.1.2.1.53.1.1.1.1.1.1 | ColumnvgRptrInfoIndex | not-accessible | current | A unique identifier for the repeater for which this entry contains information. The numbering scheme for repeaters is implementation specific. |
| 1.3.6.1.2.1.53.1.1.1.1.1.2 | ColumnvgRptrInfoMACAddress | read-only | current | The MAC address used by the repeater when it initiates training on the uplink port. Repeaters are allowed to train with an assigned MAC address or a null (all … |
| 1.3.6.1.2.1.53.1.1.1.1.1.3 | ColumnvgRptrInfoCurrentFramingType | read-only | current | The type of framing (802.3 or 802.5) currently in use by the repeater. |
| 1.3.6.1.2.1.53.1.1.1.1.1.4 | ColumnvgRptrInfoDesiredFramingType | read-write | current | The type of framing which will be used by the repeater after the next time it is reset. The value of this object should be preserved across repeater resets and… |
| 1.3.6.1.2.1.53.1.1.1.1.1.5 | ColumnvgRptrInfoFramingCapability | read-only | current | The type of framing this repeater is capable of supporting. |
| 1.3.6.1.2.1.53.1.1.1.1.1.6 | ColumnvgRptrInfoTrainingVersion | read-only | current | The highest version bits (vvv bits) supported by the repeater during training. |
| 1.3.6.1.2.1.53.1.1.1.1.1.7 | ColumnvgRptrInfoOperStatus | read-only | current | The vgRptrInfoOperStatus object indicates the operational state of the repeater. |
| 1.3.6.1.2.1.53.1.1.1.1.1.8 | ColumnvgRptrInfoReset | read-write | current | Setting this object to reset(2) causes the repeater to transition to its initial state as specified in clause 12 [IEEE Std 802.12]. Setting this object to noRe… |
| 1.3.6.1.2.1.53.1.1.1.1.1.9 | ColumnvgRptrInfoLastChange | read-only | current | The value of sysUpTime when any of the following conditions occurred: 1) agent cold- or warm-started; 2) this instance of repeater was created (such as when a … |
| 1.3.6.1.2.1.53.1.1.2 | NodevgRptrBasicGroup | |||
| 1.3.6.1.2.1.53.1.1.2.1 | TablevgRptrBasicGroupTable | not-accessible | current | A table containing information about groups of ports. |
| 1.3.6.1.2.1.53.1.1.2.1.1 | RowvgRptrBasicGroupEntry | not-accessible | current | An entry in the vgRptrBasicGroupTable, containing information about a single group of ports. |
| 1.3.6.1.2.1.53.1.1.2.1.1.1 | ColumnvgRptrGroupIndex | not-accessible | current | This object identifies the group within the system for which this entry contains information. The numbering scheme for groups is implementation specific. |
| 1.3.6.1.2.1.53.1.1.2.1.1.2 | ColumnvgRptrGroupObjectID | read-only | current | The vendor's authoritative identification of the group. This value may be allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides a straight-fo… |
| 1.3.6.1.2.1.53.1.1.2.1.1.3 | ColumnvgRptrGroupOperStatus | read-only | current | An object that indicates the operational status of the group. A status of notPresent(4) indicates that the group is temporarily or permanently physically and/o… |
| 1.3.6.1.2.1.53.1.1.2.1.1.4 | ColumnvgRptrGroupPortCapacity | read-only | current | The vgRptrGroupPortCapacity is the number of ports that can be contained within the group. Valid range is 1-2147483647. Within each group, the ports are unique… |
| 1.3.6.1.2.1.53.1.1.2.1.1.5 | ColumnvgRptrGroupCablesBundled | read-write | current | This object is used to indicate whether there are any four-pair UTP links connected to this group that are contained in a cable bundle with multiple four-pair … |
| 1.3.6.1.2.1.53.1.1.3 | NodevgRptrBasicPort | |||
| 1.3.6.1.2.1.53.1.1.3.1 | TablevgRptrBasicPortTable | not-accessible | current | A table containing configuration and status information about 802.12 repeater ports in the system. The number of entries is independent of the number of repeat… |
| 1.3.6.1.2.1.53.1.1.3.1.1 | RowvgRptrBasicPortEntry | not-accessible | current | An entry in the vgRptrBasicPortTable, containing information about a single port. |
| 1.3.6.1.2.1.53.1.1.3.1.1.1 | ColumnvgRptrPortIndex | not-accessible | current | This object identifies the port within the group for which this entry contains information. This identifies the port independently from the repeater it may be … |
| 1.3.6.1.2.1.53.1.1.3.1.1.2 | ColumnvgRptrPortType | read-only | current | Describes the type of port. One of the following: cascadeExternal - Port is an uplink with physical connections which are externally visible cascadeInternal - … |
| 1.3.6.1.2.1.53.1.1.3.1.1.3 | ColumnvgRptrPortAdminStatus | read-write | current | Port enable/disable function. Enabling a disabled port will cause training to be initiated by the training initiator (the slave mode device) on the link. Setti… |
| 1.3.6.1.2.1.53.1.1.3.1.1.4 | ColumnvgRptrPortOperStatus | read-only | current | Current status for the port as specified by the PORT_META_STATE in the port process module of clause 12 [IEEE Std 802.12]. During initialization or any link wa… |
| 1.3.6.1.2.1.53.1.1.3.1.1.5 | ColumnvgRptrPortSupportedPromiscMode | read-only | current | This object describes whether the port hardware is capable of supporting promiscuous mode, single address mode (i.e., repeater filters unicasts not addressed t… |
| 1.3.6.1.2.1.53.1.1.3.1.1.6 | ColumnvgRptrPortSupportedCascadeMode | read-only | current | This object describes whether the port hardware is capable of supporting cascaded repeaters, end nodes, or both. A port for which vgRptrPortType is equal to 'c… |
| 1.3.6.1.2.1.53.1.1.3.1.1.7 | ColumnvgRptrPortAllowedTrainType | read-write | current | This security object is set by the network manager to configure what type of device is permitted to connect to the port. One of the following values: allowEndN… |
| 1.3.6.1.2.1.53.1.1.3.1.1.8 | ColumnvgRptrPortLastTrainConfig | read-only | current | This object is a 16 bit field. For local ports, this object contains the requested configuration field from the most recent error-free training request frame s… |
| 1.3.6.1.2.1.53.1.1.3.1.1.9 | ColumnvgRptrPortTrainingResult | read-only | current | This 18 bit field is used to indicate the result of training. It contains two bits which indicate if error-free training frames have been received, and it also… |
| 1.3.6.1.2.1.53.1.1.3.1.1.10 | ColumnvgRptrPortPriorityEnable | read-write | current | A configuration flag used to determine whether the repeater will service high priority requests received on the port as high priority or normal priority. When … |
| 1.3.6.1.2.1.53.1.1.3.1.1.11 | ColumnvgRptrPortRptrInfoIndex | read-only | current | This object identifies the repeater that this port is currently mapped to. The repeater identified by a particular value of this object is the same as that ide… |
| 1.3.6.1.2.1.53.1.2 | NodevgRptrMonitor | |||
| 1.3.6.1.2.1.53.1.2.1 | NodevgRptrMonRepeater | |||
| 1.3.6.1.2.1.53.1.2.1.1 | TablevgRptrMonitorTable | not-accessible | current | A table of performance and error statistics for each repeater in the system. The instance of the vgRptrInfoLastChange associated with a repeater is used to ind… |
| 1.3.6.1.2.1.53.1.2.1.1.1 | RowvgRptrMonitorEntry | not-accessible | current | An entry in the table, containing statistics for a single repeater. |
| 1.3.6.1.2.1.53.1.2.1.1.1.1 | ColumnvgRptrMonTotalReadableFrames | read-only | current | The total number of good frames of valid frame length that have been received on all ports in this repeater. If an implementation cannot obtain a count of fram… |
| 1.3.6.1.2.1.53.1.2.1.1.1.2 | ColumnvgRptrMonTotalReadableOctets | read-only | current | The total number of octets contained in good frames that have been received on all ports in this repeater. If an implementation cannot obtain a count of octets… |
| 1.3.6.1.2.1.53.1.2.1.1.1.3 | ColumnvgRptrMonReadableOctetRollovers | read-only | current | The total number of times that the associated instance of the vgRptrMonTotalReadableOctets counter has rolled over. This two-counter mechanism is provided for … |
| 1.3.6.1.2.1.53.1.2.1.1.1.4 | ColumnvgRptrMonHCTotalReadableOctets | read-only | current | The total number of octets contained in good frames that have been received on all ports in this repeater. If an implementation cannot obtain a count of octets… |
| 1.3.6.1.2.1.53.1.2.1.1.1.5 | ColumnvgRptrMonTotalErrors | read-only | current | The total number of errors which have occurred on all of the ports in this repeater. If an implementation cannot obtain a count of these errors as seen by the … |
| 1.3.6.1.2.1.53.1.2.2 | NodevgRptrMonGroup | |||
| 1.3.6.1.2.1.53.1.2.3 | NodevgRptrMonPort | |||
| 1.3.6.1.2.1.53.1.2.3.1 | TablevgRptrMonPortTable | not-accessible | current | A table of performance and error statistics for the ports. The columnar object vgRptrPortLastChange is used to indicate possible discontinuities of counter typ… |
| 1.3.6.1.2.1.53.1.2.3.1.1 | RowvgRptrMonPortEntry | not-accessible | current | An entry in the vgRptrMonPortTable, containing performance and error statistics for a single port. |
| 1.3.6.1.2.1.53.1.2.3.1.1.1 | ColumnvgRptrPortReadableFrames | read-only | current | This object is the number of good frames of valid frame length that have been received on this port. This counter is incremented by one for each frame received… |
| 1.3.6.1.2.1.53.1.2.3.1.1.2 | ColumnvgRptrPortReadableOctets | read-only | current | This object is a count of the number of octets contained in good frames that have been received on this port. This counter is incremented by OctetCount for eac… |
| 1.3.6.1.2.1.53.1.2.3.1.1.3 | ColumnvgRptrPortReadOctetRollovers | read-only | current | This object is a count of the number of times that the associated instance of the vgRptrPortReadableOctets counter has rolled over. This two-counter mechanism … |
| 1.3.6.1.2.1.53.1.2.3.1.1.4 | ColumnvgRptrPortHCReadableOctets | read-only | current | This object is a count of the number of octets contained in good frames that have been received on this port. This counter is incremented by OctetCount for eac… |
| 1.3.6.1.2.1.53.1.2.3.1.1.5 | ColumnvgRptrPortUnreadableOctets | read-only | current | This object is a count of the number of octets contained in invalid frames that have been received on this port. This counter is incremented by OctetCount for … |
| 1.3.6.1.2.1.53.1.2.3.1.1.6 | ColumnvgRptrPortUnreadOctetRollovers | read-only | current | This object is a count of the number of times that the associated instance of the vgRptrPortUnreadableOctets counter has rolled over. This two-counter mechanis… |
| 1.3.6.1.2.1.53.1.2.3.1.1.7 | ColumnvgRptrPortHCUnreadableOctets | read-only | current | This object is a count of the number of octets contained in invalid frames that have been received on this port. This counter is incremented by OctetCount for … |
| 1.3.6.1.2.1.53.1.2.3.1.1.8 | ColumnvgRptrPortHighPriorityFrames | read-only | current | This object is a count of high priority frames that have been received on this port. This counter is incremented by one for each high priority frame received o… |
| 1.3.6.1.2.1.53.1.2.3.1.1.9 | ColumnvgRptrPortHighPriorityOctets | read-only | current | This object is a count of the number of octets contained in high priority frames that have been received on this port. This counter is incremented by OctetCoun… |
| 1.3.6.1.2.1.53.1.2.3.1.1.10 | ColumnvgRptrPortHighPriOctetRollovers | read-only | current | This object is a count of the number of times that the associated instance of the vgRptrPortHighPriorityOctets counter has rolled over. This two-counter mechan… |
| 1.3.6.1.2.1.53.1.2.3.1.1.11 | ColumnvgRptrPortHCHighPriorityOctets | read-only | current | This object is a count of the number of octets contained in high priority frames that have been received on this port. This counter is incremented by OctetCoun… |
| 1.3.6.1.2.1.53.1.2.3.1.1.12 | ColumnvgRptrPortNormPriorityFrames | read-only | current | This object is a count of normal priority frames that have been received on this port. This counter is incremented by one for each normal priority frame receiv… |
| 1.3.6.1.2.1.53.1.2.3.1.1.13 | ColumnvgRptrPortNormPriorityOctets | read-only | current | This object is a count of the number of octets contained in normal priority frames that have been received on this port. This counter is incremented by OctetCo… |
| 1.3.6.1.2.1.53.1.2.3.1.1.14 | ColumnvgRptrPortNormPriOctetRollovers | read-only | current | This object is a count of the number of times that the associated instance of the vgRptrPortNormPriorityOctets counter has rolled over. This two-counter mechan… |
| 1.3.6.1.2.1.53.1.2.3.1.1.15 | ColumnvgRptrPortHCNormPriorityOctets | read-only | current | This object is a count of the number of octets contained in normal priority frames that have been received on this port. This counter is incremented by OctetCo… |
| 1.3.6.1.2.1.53.1.2.3.1.1.16 | ColumnvgRptrPortBroadcastFrames | read-only | current | This object is a count of broadcast packets that have been received on this port. This counter is incremented by one for each readable frame received on this p… |
| 1.3.6.1.2.1.53.1.2.3.1.1.17 | ColumnvgRptrPortMulticastFrames | read-only | current | This object is a count of multicast packets that have been received on this port. This counter is incremented by one for each readable frame received on this p… |
| 1.3.6.1.2.1.53.1.2.3.1.1.18 | ColumnvgRptrPortNullAddressedFrames | read-only | current | This object is a count of null addressed packets that have been received on this port. This counter is incremented by one for each frame received on this port … |
| 1.3.6.1.2.1.53.1.2.3.1.1.19 | ColumnvgRptrPortIPMFrames | read-only | current | This object is a count of the number of frames that have been received on this port with an invalid packet marker and no PMI errors. A repeater will write an i… |
| 1.3.6.1.2.1.53.1.2.3.1.1.20 | ColumnvgRptrPortOversizeFrames | read-only | current | This object is a count of oversize frames received on this port. This counter is incremented by one for each frame received on this port whose OctetCount is la… |
| 1.3.6.1.2.1.53.1.2.3.1.1.21 | ColumnvgRptrPortDataErrorFrames | read-only | current | This object is a count of errored frames received on this port. This counter is incremented by one for each frame received on this port with any of the followi… |
| 1.3.6.1.2.1.53.1.2.3.1.1.22 | ColumnvgRptrPortPriorityPromotions | read-only | current | This counter is incremented by one each time the priority promotion timer has expired on this port and a normal priority frame is priority promoted. This count… |
| 1.3.6.1.2.1.53.1.2.3.1.1.23 | ColumnvgRptrPortTransitionToTrainings | read-only | current | This counter is incremented by one each time the vgRptrPortStatus object for this port transitions into the 'training' state. This counter may experience a dis… |
| 1.3.6.1.2.1.53.1.2.3.1.1.24 | ColumnvgRptrPortLastChange | read-only | current | The value of sysUpTime when the last of the following occurred: 1) the agent cold- or warm-started; 2) the row for the port was created (such as when a device … |
| 1.3.6.1.2.1.53.1.3 | NodevgRptrAddrTrack | |||
| 1.3.6.1.2.1.53.1.3.1 | NodevgRptrAddrTrackRptr | |||
| 1.3.6.1.2.1.53.1.3.2 | NodevgRptrAddrTrackGroup | |||
| 1.3.6.1.2.1.53.1.3.3 | NodevgRptrAddrTrackPort | |||
| 1.3.6.1.2.1.53.1.3.3.1 | TablevgRptrAddrTrackTable | not-accessible | current | Table of address mapping information about the ports. |
| 1.3.6.1.2.1.53.1.3.3.1.1 | RowvgRptrAddrTrackEntry | not-accessible | current | An entry in the table, containing address mapping information about a single port. |
| 1.3.6.1.2.1.53.1.3.3.1.1.1 | ColumnvgRptrAddrLastTrainedAddress | read-only | current | This object is the MAC address of the last station which succeeded in training on this port. A cascaded repeater may train using the null address. If no statio… |
| 1.3.6.1.2.1.53.1.3.3.1.1.2 | ColumnvgRptrAddrTrainedAddrChanges | read-only | current | This counter is incremented by one for each time that the vgRptrAddrLastTrainedAddress object for this port changes. |
| 1.3.6.1.2.1.53.1.3.3.1.1.3 | ColumnvgRptrRptrDetectedDupAddress | read-only | current | This object is used to indicate that the repeater detected an error-free training frame on this port with a non-null source MAC address which matches the value… |
| 1.3.6.1.2.1.53.1.3.3.1.1.4 | ColumnvgRptrMgrDetectedDupAddress | read-write | current | This object can be set by a management station when it detects that there is a duplicate MAC address. This object is OR'd with vgRptrRptrDetectedDupAddress to … |
| 1.3.6.1.2.1.53.2 | NodevgRptrTraps | |||
| 1.3.6.1.2.1.53.2.0 | NodevgRptrTrapPrefix | |||
| 1.3.6.1.2.1.53.2.0.1 | NotificationvgRptrHealth | current | A vgRptrHealth trap conveys information related to the operational state of a repeater. This trap is sent when the value of an instance of vgRptrInfoOperStatus… | |
| 1.3.6.1.2.1.53.2.0.2 | NotificationvgRptrResetEvent | current | A vgRptrResetEvent trap conveys information related to the operational state of a repeater. This trap is sent on completion of a repeater reset action. A repea… | |
| 1.3.6.1.2.1.53.3 | NodevgRptrConformance | |||
| 1.3.6.1.2.1.53.3.1 | NodevgRptrCompliances | |||
| 1.3.6.1.2.1.53.3.1.1 | CompliancevgRptrCompliance | read-only | current | The compliance statement for managed 802.12 repeaters. |
| 1.3.6.1.2.1.53.3.2 | NodevgRptrGroups | |||
| 1.3.6.1.2.1.53.3.2.1 | GroupvgRptrConfigGroup | current | A collection of objects for managing the status and configuration of IEEE 802.12 repeaters. | |
| 1.3.6.1.2.1.53.3.2.2 | GroupvgRptrStatsGroup | current | A collection of objects for providing statistics for IEEE 802.12 repeaters. Systems which support Counter64 should also implement vgRptrStats64Group. | |
| 1.3.6.1.2.1.53.3.2.3 | GroupvgRptrStats64Group | current | A collection of objects for providing statistics for IEEE 802.12 repeaters in a system that supports Counter64. | |
| 1.3.6.1.2.1.53.3.2.4 | GroupvgRptrAddrGroup | current | A collection of objects for tracking addresses on IEEE 802.12 repeaters. | |
| 1.3.6.1.2.1.53.3.2.5 | GroupvgRptrNotificationsGroup | current | A collection of notifications used to indicate 802.12 repeater general status changes. |