DOT3-EPON-MIB
112 objects
The objects in this MIB module are used to manage the Ethernet in the First Mile (EFM) Ethernet Passive Optical Network (EPON) Interfaces as defined in IEEE P802.3ah clauses 60, 64, and 65. The following reference is used throughout this MIB module: [802.3ah] refers to: Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications - Media Access Control Parameters, Physical Layers and Management Parameters for subscriber access networks. IEEE Std 802.3ah-2004, October 2004. Of particular interest are clause 64 (Multi-Point Control Protocol - MPCP), clause 65 (Point-to-Multipoint Reconciliation Sublayer - P2MP RS), clause 60 (Ethernet Passive Optical Network Physical Medium Dependent - EPON PMDs), clause 30, 'Management', and clause 45, 'Management Data Input/Output (MDIO) Interface'. Copyright (C) The IETF Trust (2007). This version of this MIB module is part of 4837; see the RFC itself for full legal notices. Key abbreviations: BER - Bit Error Rate BW - bandwidth CRC - Cyclic Redundancy Check EFM - Ethernet First Mile EPON - Ethernet Passive Optical Network FEC - Forward Error Correction LLID - Logical Link Identifier MAC - Media Access Control Mbps - Megabit per second MDIO - Management Data Input/Output MPCP - Multi-Point Control Protocol OLT - Optical Line Terminal (Server unit of the EPON) OMP - Optical Multi-Point ONU - Optical Network Unit (Client unit of the EPON) P2MP - Point-to-Multipoint PHY - Physical Layer PMD - Physical Medium Dependent PON - Passive Optical Network RTT - Round Trip Time SLD - Start of LLID Delimiter TQ - Time Quanta
Imported Objects
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 Integer32 mib-2 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | MacAddress TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.155 | Identitydot3EponMIB | The objects in this MIB module are used to manage the Ethernet in the First Mile (EFM) Ethernet Passive Optical Network (EPON) Interfaces as defined in IEEE P8… | ||
| 1.3.6.1.2.1.155.1 | Nodedot3EponObjects | |||
| 1.3.6.1.2.1.155.1.1 | Nodedot3EponMpcpObjects | |||
| 1.3.6.1.2.1.155.1.1.1 | Tabledot3MpcpControlTable | not-accessible | current | A Table of dot3 Multi-Point Control Protocol (MPCP) MIB objects. The entries in the table are control and status objects of the MPCP. Each object has a row for… |
| 1.3.6.1.2.1.155.1.1.1.1 | Rowdot3MpcpControlEntry | not-accessible | current | An entry in the dot3 MPCP Control table. Rows exist for an OLT interface and an ONU interface. A row in the table is denoted by the ifIndex of the link and it … |
| 1.3.6.1.2.1.155.1.1.1.1.1 | Columndot3MpcpOperStatus | read-only | current | This object reflects the operational state of the Multi-Point MAC Control sublayer as defined in [802.3ah], clause 64. When the value is true(1), the interface… |
| 1.3.6.1.2.1.155.1.1.1.1.2 | Columndot3MpcpAdminState | read-write | current | This object is used to define the admin state of the Multi-Point MAC Control sublayer, as defined in [802.3ah], clause 64, and to reflect its state. When selec… |
| 1.3.6.1.2.1.155.1.1.1.1.3 | Columndot3MpcpMode | read-only | current | This object is used to identify the operational state of the Multi-Point MAC Control sublayer as defined in [802.3ah], clause 64. Reading olt(1) for an OLT (se… |
| 1.3.6.1.2.1.155.1.1.1.1.4 | Columndot3MpcpSyncTime | read-only | current | An object that reports the 'sync lock time' of the OLT receiver in increments of Time Quanta (TQ)-16ns as defined in [802.3ah], clauses 60, 64, and 65. The val… |
| 1.3.6.1.2.1.155.1.1.1.1.5 | Columndot3MpcpLinkID | read-only | current | An object that identifies the Logical Link Identifier (LLID) associated with the MAC of the virtual link as specified in [802.3ah], clause 65.1.3.2.2. This obj… |
| 1.3.6.1.2.1.155.1.1.1.1.6 | Columndot3MpcpRemoteMACAddress | read-only | current | An object that identifies the source_address parameter of the last MPCPDUs passed to the MAC Control. This value is updated on reception of a valid frame with … |
| 1.3.6.1.2.1.155.1.1.1.1.7 | Columndot3MpcpRegistrationState | read-only | current | An object that identifies the registration state of the Multi-Point MAC Control sublayer as defined in [802.3ah], clause 64. When this object has the enumerati… |
| 1.3.6.1.2.1.155.1.1.1.1.8 | Columndot3MpcpTransmitElapsed | read-only | current | An object that reports the interval from the last MPCP frame transmission in increments of Time Quanta (TQ)-16ns. The value returned shall be (interval from la… |
| 1.3.6.1.2.1.155.1.1.1.1.9 | Columndot3MpcpReceiveElapsed | read-only | current | An object that reports the interval from last MPCP frame reception in increments of Time Quanta (TQ)-16ns. The value returned shall be (interval from last MPCP… |
| 1.3.6.1.2.1.155.1.1.1.1.10 | Columndot3MpcpRoundTripTime | read-only | current | An object that reports the MPCP round trip time in increments of Time Quanta (TQ)-16ns. The value returned shall be (round trip time in ns)/16. If this value e… |
| 1.3.6.1.2.1.155.1.1.1.1.11 | Columndot3MpcpMaximumPendingGrants | read-only | current | An object that reports the maximum number of grants that an ONU can store for handling. The maximum number of grants that an ONU can store for handling has a r… |
| 1.3.6.1.2.1.155.1.1.2 | Tabledot3MpcpStatTable | not-accessible | current | This table defines the list of statistics counters of an interface implementing the [802.3ah], clause 64 MPCP. Each object has a row for every virtual link den… |
| 1.3.6.1.2.1.155.1.1.2.1 | Rowdot3MpcpStatEntry | not-accessible | current | An entry in the table of statistics counters of the [802.3ah], clause 64, MPCP interface. Rows exist for an OLT interface and an ONU interface. A row in the ta… |
| 1.3.6.1.2.1.155.1.1.2.1.1 | Columndot3MpcpMACCtrlFramesTransmitted | read-only | current | A count of MPCP frames passed to the MAC sublayer for transmission. This counter is incremented when a MA_CONTROL.request service primitive is generated within… |
| 1.3.6.1.2.1.155.1.1.2.1.2 | Columndot3MpcpMACCtrlFramesReceived | read-only | current | A count of MPCP frames passed by the MAC sublayer to the MAC Control sublayer. This counter is incremented when a ReceiveFrame function call returns a valid fr… |
| 1.3.6.1.2.1.155.1.1.2.1.3 | Columndot3MpcpDiscoveryWindowsSent | read-only | current | A count of discovery windows generated. The counter is incremented by one for each generated discovery window. This object is applicable for an OLT and an ONU.… |
| 1.3.6.1.2.1.155.1.1.2.1.4 | Columndot3MpcpDiscoveryTimeout | read-only | current | A count of the number of times a discovery timeout occurs. Increment the counter by one for each discovery processing state-machine reset resulting from timeou… |
| 1.3.6.1.2.1.155.1.1.2.1.5 | Columndot3MpcpTxRegRequest | read-only | current | A count of the number of times a REGISTER_REQ MPCP frame transmission occurs. Increment the counter by one for each REGISTER_REQ MPCP frame transmitted as defi… |
| 1.3.6.1.2.1.155.1.1.2.1.6 | Columndot3MpcpRxRegRequest | read-only | current | A count of the number of times a REGISTER_REQ MPCP frame reception occurs. Increment the counter by one for each REGISTER_REQ MPCP frame received as defined in… |
| 1.3.6.1.2.1.155.1.1.2.1.7 | Columndot3MpcpTxRegAck | read-only | current | A count of the number of times a REGISTER_ACK MPCP frame transmission occurs. Increment the counter by one for each REGISTER_ACK MPCP frame transmitted as defi… |
| 1.3.6.1.2.1.155.1.1.2.1.8 | Columndot3MpcpRxRegAck | read-only | current | A count of the number of times a REGISTER_ACK MPCP frame reception occurs. Increment the counter by one for each REGISTER_ACK MPCP frame received as defined in… |
| 1.3.6.1.2.1.155.1.1.2.1.9 | Columndot3MpcpTxReport | read-only | current | A count of the number of times a REPORT MPCP frame transmission occurs. Increment the counter by one for each REPORT MPCP frame transmitted as defined in [802.… |
| 1.3.6.1.2.1.155.1.1.2.1.10 | Columndot3MpcpRxReport | read-only | current | A count of the number of times a REPORT MPCP frame reception occurs. Increment the counter by one for each REPORT MPCP frame received as defined in [802.3ah], … |
| 1.3.6.1.2.1.155.1.1.2.1.11 | Columndot3MpcpTxGate | read-only | current | A count of the number of times a GATE MPCP frame transmission occurs. Increment the counter by one for each GATE MPCP frame transmitted as defined in [802.3ah]… |
| 1.3.6.1.2.1.155.1.1.2.1.12 | Columndot3MpcpRxGate | read-only | current | A count of the number of times a GATE MPCP frame reception occurs. Increment the counter by one for each GATE MPCP frame received as defined in [802.3ah], clau… |
| 1.3.6.1.2.1.155.1.1.2.1.13 | Columndot3MpcpTxRegister | read-only | current | A count of the number of times a REGISTER MPCP frame transmission occurs. Increment the counter by one for each REGISTER MPCP frame transmitted as defined in [… |
| 1.3.6.1.2.1.155.1.1.2.1.14 | Columndot3MpcpRxRegister | read-only | current | A count of the number of times a REGISTER MPCP frame reception occurs. Increment the counter by one for each REGISTER MPCP frame received as defined in [802.3a… |
| 1.3.6.1.2.1.155.1.2 | Nodedot3OmpEmulationObjects | |||
| 1.3.6.1.2.1.155.1.2.1 | Tabledot3OmpEmulationTable | not-accessible | current | A table of dot3 OmpEmulation MIB objects. The table contain objects for the management of the OMPEmulation sublayer. Each object has a row for every virtual li… |
| 1.3.6.1.2.1.155.1.2.1.1 | Rowdot3OmpEmulationEntry | not-accessible | current | An entry in the dot3 OmpEmulation table. Rows exist for an OLT interface and an ONU interface. A row in the table is denoted by the ifIndex of the link and it … |
| 1.3.6.1.2.1.155.1.2.1.1.1 | Columndot3OmpEmulationType | read-only | current | An object that indicates the mode of operation of the Reconciliation Sublayer for Point-to-Point Emulation (see [802.3ah], clause 65.1). unknown(1) value is as… |
| 1.3.6.1.2.1.155.1.2.2 | Tabledot3OmpEmulationStatTable | not-accessible | current | This table defines the list of statistics counters of [802.3ah], clause 65, OMPEmulation sublayer. Each object has a row for every virtual link denoted by the … |
| 1.3.6.1.2.1.155.1.2.2.1 | Rowdot3OmpEmulationStatEntry | not-accessible | current | An entry in the table of statistics counters of [802.3ah], clause 65, OMPEmulation sublayer. Rows exist for an OLT interface and an ONU interface. A row in the… |
| 1.3.6.1.2.1.155.1.2.2.1.1 | Columndot3OmpEmulationSLDErrors | read-only | current | A count of frames received that do not contain a valid SLD field as defined in [802.3ah], clause 65.1.3.3.1. This object is applicable for an OLT and an ONU. A… |
| 1.3.6.1.2.1.155.1.2.2.1.2 | Columndot3OmpEmulationCRC8Errors | read-only | current | A count of frames received that contain a valid SLD field, as defined in [802.3ah], clause 65.1.3.3.1, but do not pass the CRC-8 check as defined in [802.3ah],… |
| 1.3.6.1.2.1.155.1.2.2.1.3 | Columndot3OmpEmulationBadLLID | read-only | current | A count of frames received that contain a valid SLD field, as defined in [802.3ah], clause 65.1.3.3.1, and pass the CRC-8 check, as defined in [802.3ah], claus… |
| 1.3.6.1.2.1.155.1.2.2.1.4 | Columndot3OmpEmulationGoodLLID | read-only | current | A count of frames received that contain a valid SLD field, as defined in [802.3ah], clause 65.1.3.3.1, and pass the CRC-8 check as defined in [802.3ah], clause… |
| 1.3.6.1.2.1.155.1.2.2.1.5 | Columndot3OmpEmulationOnuPonCastLLID | read-only | current | A count of frames received that contain a valid SLD field, as defined in [802.3ah], clause 65.1.3.3.1, pass the CRC-8 check, as defined in [802.3ah], clause 65… |
| 1.3.6.1.2.1.155.1.2.2.1.6 | Columndot3OmpEmulationOltPonCastLLID | read-only | current | A count of frames received that contain a valid SLD field, as defined in [802.3ah], clause 65.1.3.3.1, pass the CRC-8 check, as defined in [802.3ah], clause 65… |
| 1.3.6.1.2.1.155.1.2.2.1.7 | Columndot3OmpEmulationBroadcastBitNotOnuLlid | read-only | current | A count of frames received that contain a valid SLD field, as defined in [802.3ah], clause 65.1.3.3.1, pass the CRC-8 check, as defined in [802.3ah], clause 65… |
| 1.3.6.1.2.1.155.1.2.2.1.8 | Columndot3OmpEmulationOnuLLIDNotBroadcast | read-only | current | A count of frames received that contain a valid SLD field, as defined in [802.3ah], clause 65.1.3.3.1, pass the CRC-8 check, as defined in [802.3ah], clause 65… |
| 1.3.6.1.2.1.155.1.2.2.1.9 | Columndot3OmpEmulationBroadcastBitPlusOnuLlid | read-only | current | A count of frames received that contain a valid SLD field, as defined in [802.3ah], clause 65.1.3.3.1, pass the CRC-8 check, as defined in [802.3ah], clause 65… |
| 1.3.6.1.2.1.155.1.2.2.1.10 | Columndot3OmpEmulationNotBroadcastBitNotOnuLlid | read-only | current | A count of frames received that contain a valid SLD field, as defined in [802.3ah], clause 65.1.3.3.1, pass the CRC-8 check, as defined in [802.3ah], clause 65… |
| 1.3.6.1.2.1.155.1.3 | Nodedot3EponFecObjects | |||
| 1.3.6.1.2.1.155.1.3.1 | Tabledot3EponFecTable | not-accessible | current | A table of dot3 EPON FEC management objects. The entries in the table are control and status objects and statistic counters for the FEC layer. Each object has … |
| 1.3.6.1.2.1.155.1.3.1.1 | Rowdot3EponFecEntry | not-accessible | current | An entry in the dot3 EPON FEC table. Rows exist for an OLT interface and an ONU interface. A row in the table is denoted by the ifIndex of the link and it is c… |
| 1.3.6.1.2.1.155.1.3.1.1.1 | Columndot3EponFecPCSCodingViolation | read-only | current | For a 100 Mbps operation, it is a count of the number of times an invalid code-group is received, other than the /H/ code-group. For a 1000 Mbps operation, it … |
| 1.3.6.1.2.1.155.1.3.1.1.2 | Columndot3EponFecAbility | read-only | current | An object that indicates the support of operation of the optional FEC sublayer of the 1000BASE-PX PHY specified in [802.3ah], clause 65.2. unknown(1) value is … |
| 1.3.6.1.2.1.155.1.3.1.1.3 | Columndot3EponFecMode | read-write | current | An object that defines the mode of operation of the optional FEC sublayer of the 1000BASE-PX PHY, specified in [802.3ah], clause 65.2, and reflects its state. … |
| 1.3.6.1.2.1.155.1.3.1.1.4 | Columndot3EponFecCorrectedBlocks | read-only | current | For 10PASS-TS, 2BASE-TL, and 1000BASE-PX PHYs, it is a count of corrected FEC blocks. This counter will not increment for other PHY Types. Increment the counte… |
| 1.3.6.1.2.1.155.1.3.1.1.5 | Columndot3EponFecUncorrectableBlocks | read-only | current | For 10PASS-TS, 2BASE-TL, and 1000BASE-PX PHYs, it is a count of uncorrectable FEC blocks. This counter will not increment for other PHY Types. Increment the co… |
| 1.3.6.1.2.1.155.1.3.1.1.6 | Columndot3EponFecBufferHeadCodingViolation | read-only | current | For a 1000 Mbps operation, it is a count of the number of invalid code-group received directly from the link. The value has a meaning only in 1000 Mbps mode an… |
| 1.3.6.1.2.1.155.1.4 | Nodedot3ExtPkgObjects | |||
| 1.3.6.1.2.1.155.1.4.1 | Nodedot3ExtPkgControlObjects | |||
| 1.3.6.1.2.1.155.1.4.1.1 | Tabledot3ExtPkgControlTable | not-accessible | current | A table of Extended package Control management objects. Entries in the table are control and status indication objects of an EPON interface, which are gathered… |
| 1.3.6.1.2.1.155.1.4.1.1.1 | Rowdot3ExtPkgControlEntry | not-accessible | current | An entry in the Extended package Control table. Rows exist for an OLT interface and an ONU interface. A row in the table is denoted by the ifIndex of the link … |
| 1.3.6.1.2.1.155.1.4.1.1.1.1 | Columndot3ExtPkgObjectReset | read-write | current | This object is used to reset the EPON interface. The interface may be unavailable while the reset occurs and data may be lost. Setting this object to running(1… |
| 1.3.6.1.2.1.155.1.4.1.1.1.2 | Columndot3ExtPkgObjectPowerDown | read-write | current | This object is used to power down the EPON interface. The interface may be unavailable while the power down occurs and data may be lost. Setting this object to… |
| 1.3.6.1.2.1.155.1.4.1.1.1.3 | Columndot3ExtPkgObjectNumberOfLLIDs | read-only | current | A read only object that indicates the number of registered LLIDs. The initialization value is 0. This object is applicable for an OLT with the same value for a… |
| 1.3.6.1.2.1.155.1.4.1.1.1.4 | Columndot3ExtPkgObjectFecEnabled | read-write | current | An object defining the FEC mode of operation of the interface, and indicating its state. The modes defined in this object are extensions to the FEC modes defin… |
| 1.3.6.1.2.1.155.1.4.1.1.1.5 | Columndot3ExtPkgObjectReportMaximumNumQueues | read-only | current | An object, that defines the maximal number of queues in the REPORT message as defined in [802.3ah], clause 64. For further information please see the descripti… |
| 1.3.6.1.2.1.155.1.4.1.1.1.6 | Columndot3ExtPkgObjectRegisterAction | read-write | current | An object configuring the registration state of an interface, and indicating its registration state. Write operation changes the registration state to its new … |
| 1.3.6.1.2.1.155.1.4.1.2 | Tabledot3ExtPkgQueueTable | not-accessible | current | A table of the extended package objects for queue management. The [802.3ah] MPCP defines a report message of the occupancy of the transmit queues for the feedb… |
| 1.3.6.1.2.1.155.1.4.1.2.1 | Rowdot3ExtPkgQueueEntry | not-accessible | current | An entry in the Extended package Queue table. At the OLT, the rows exist for each ifIndex and dot3QueueIndex. At the ONU, rows exist for the single ifIndex for… |
| 1.3.6.1.2.1.155.1.4.1.2.1.1 | Columndot3QueueIndex | not-accessible | current | An object that identifies an index for the queue table reflecting the queue index of the queues that are reported in the MPCP REPORT message as defined in [802… |
| 1.3.6.1.2.1.155.1.4.1.2.1.2 | Columndot3ExtPkgObjectReportNumThreshold | read-write | current | An object that defines the number of thresholds for each queue in the REPORT message as defined in [802.3ah], clause 64. Each queue_set reporting will provide … |
| 1.3.6.1.2.1.155.1.4.1.2.1.3 | Columndot3ExtPkgObjectReportMaximumNumThreshold | read-only | current | An object, that defines the maximal number of thresholds for each queue in the REPORT message as defined in [802.3ah], clause 64. Each queue_set reporting will… |
| 1.3.6.1.2.1.155.1.4.1.2.1.4 | Columndot3ExtPkgStatTxFramesQueue | read-only | current | A count of the number of times a frame transmission occurs from the corresponding 'Queue'. Increment the counter by one for each frame transmitted, which is an… |
| 1.3.6.1.2.1.155.1.4.1.2.1.5 | Columndot3ExtPkgStatRxFramesQueue | read-only | current | A count of the number of times a frame reception occurs from the corresponding 'Queue'. Increment the counter by one for each frame received, which is an input… |
| 1.3.6.1.2.1.155.1.4.1.2.1.6 | Columndot3ExtPkgStatDroppedFramesQueue | read-only | current | A count of the number of times a frame drop occurs from the corresponding 'Queue'. Increment the counter by one for each frame dropped from the corresponding '… |
| 1.3.6.1.2.1.155.1.4.1.3 | Tabledot3ExtPkgQueueSetsTable | not-accessible | current | A table of Extended package objects used for the management of the queue_sets. Entries are control and status indication objects of an EPON interface, which ar… |
| 1.3.6.1.2.1.155.1.4.1.3.1 | Rowdot3ExtPkgQueueSetsEntry | not-accessible | current | An entry in the Extended package queue_set table. At the OLT, the rows exist for each ifIndex, dot3QueueSetQueueIndex and dot3QueueSetIndex. At the ONU, rows e… |
| 1.3.6.1.2.1.155.1.4.1.3.1.1 | Columndot3QueueSetQueueIndex | not-accessible | current | An object that identifies the queue index for the dot3ExtPkgQueueSetsTable table. The queues are reported in the MPCP REPORT message as defined in [802.3ah], c… |
| 1.3.6.1.2.1.155.1.4.1.3.1.2 | Columndot3QueueSetIndex | not-accessible | current | An object that identifies the queue_set index for the dot3ExtPkgQueueSetsTable table. The queues are reported in the MPCP REPORT message as defined in [802.3ah… |
| 1.3.6.1.2.1.155.1.4.1.3.1.3 | Columndot3ExtPkgObjectReportThreshold | read-write | current | An object that defines the value of a threshold report for each queue_set in the REPORT message as defined in [802.3ah], clause 64. The number of sets for each… |
| 1.3.6.1.2.1.155.1.4.1.5 | Tabledot3ExtPkgOptIfTable | not-accessible | current | This table defines the control and status indication objects for the optical interface of the EPON interface. Each object has a row for every virtual link deno… |
| 1.3.6.1.2.1.155.1.4.1.5.1 | Rowdot3ExtPkgOptIfEntry | not-accessible | current | An entry in the optical interface table of the EPON interface. Rows exist for an OLT interface and an ONU interface. A row in the table is denoted by the ifInd… |
| 1.3.6.1.2.1.155.1.4.1.5.1.1 | Columndot3ExtPkgOptIfSuspectedFlag | read-only | current | This object is a reliability indication. If true, the data in this entry may be unreliable. This object is applicable for an OLT and an ONU. At the OLT, it has… |
| 1.3.6.1.2.1.155.1.4.1.5.1.2 | Columndot3ExtPkgOptIfInputPower | read-only | current | The optical power monitored at the input. This object is applicable for an OLT and an ONU. At the OLT, it has a distinct value for each virtual interface. |
| 1.3.6.1.2.1.155.1.4.1.5.1.3 | Columndot3ExtPkgOptIfLowInputPower | read-only | current | The lowest optical power monitored at the input during the current 15-minute interval. This object is applicable for an OLT and an ONU. At the OLT, it has a di… |
| 1.3.6.1.2.1.155.1.4.1.5.1.4 | Columndot3ExtPkgOptIfHighInputPower | read-only | current | The highest optical power monitored at the input during the current 15-minute interval. This object is applicable for an OLT and an ONU. At the OLT, it has a d… |
| 1.3.6.1.2.1.155.1.4.1.5.1.5 | Columndot3ExtPkgOptIfLowerInputPowerThreshold | read-write | current | The lower limit threshold on input power. If dot3ExtPkgOptIfInputPower drops to this value or below, a Threshold Crossing Alert (TCA) should be sent. Reading w… |
| 1.3.6.1.2.1.155.1.4.1.5.1.6 | Columndot3ExtPkgOptIfUpperInputPowerThreshold | read-write | current | The upper limit threshold on input power. If dot3ExtPkgOptIfInputPower reaches or exceeds this value, a Threshold Crossing Alert (TCA) should be sent. Reading … |
| 1.3.6.1.2.1.155.1.4.1.5.1.7 | Columndot3ExtPkgOptIfOutputPower | read-only | current | The optical power monitored at the output. This object is applicable for an OLT and an ONU. At the OLT, it has a distinct value for each virtual interface. |
| 1.3.6.1.2.1.155.1.4.1.5.1.8 | Columndot3ExtPkgOptIfLowOutputPower | read-only | current | The lowest optical power monitored at the output during the current 15-minute interval. This object is applicable for an OLT and an ONU. At the OLT, it has a d… |
| 1.3.6.1.2.1.155.1.4.1.5.1.9 | Columndot3ExtPkgOptIfHighOutputPower | read-only | current | The highest optical power monitored at the output during the current 15-minute interval. This object is applicable for an OLT and an ONU. At the OLT, it has a … |
| 1.3.6.1.2.1.155.1.4.1.5.1.10 | Columndot3ExtPkgOptIfLowerOutputPowerThreshold | read-write | current | The lower limit threshold on output power. If dot3ExtPkgOptIfOutputPower drops to this value or below, a Threshold Crossing Alert (TCA) should be sent. Reading… |
| 1.3.6.1.2.1.155.1.4.1.5.1.11 | Columndot3ExtPkgOptIfUpperOutputPowerThreshold | read-write | current | The upper limit threshold on output power. If dot3ExtPkgOptIfOutputPower reaches or exceeds this value, a Threshold Crossing Alert (TCA) should be sent. Readin… |
| 1.3.6.1.2.1.155.1.4.1.5.1.12 | Columndot3ExtPkgOptIfSignalDetect | read-only | current | When getting true(1), there is a valid optical signal at the receive that is above the optical power level for signal detection. When getting false(2) the opti… |
| 1.3.6.1.2.1.155.1.4.1.5.1.13 | Columndot3ExtPkgOptIfTransmitAlarm | read-only | current | When getting true(1) there is a non-valid optical signal at the transmit of the interface, either a higher level or lower level than expected. When getting fal… |
| 1.3.6.1.2.1.155.1.4.1.5.1.14 | Columndot3ExtPkgOptIfTransmitEnable | read-write | current | Setting this object to true(1) will cause the optical interface to start transmission (according to the control protocol specified for the logical interface). … |
| 1.3.6.1.2.1.155.2 | Nodedot3EponConformance | |||
| 1.3.6.1.2.1.155.2.1 | Nodedot3EponGroups | |||
| 1.3.6.1.2.1.155.2.1.1 | Groupdot3MpcpGroupBase | current | A collection of objects of dot3 Mpcp Control entity state definition. Objects are per LLID. | |
| 1.3.6.1.2.1.155.2.1.2 | Groupdot3MpcpGroupStat | current | A collection of objects of dot3 Mpcp Statistics. Objects are per LLID. | |
| 1.3.6.1.2.1.155.2.1.3 | Groupdot3OmpeGroupID | current | A collection of objects of dot3 OMP emulation entity state definition. Objects are per LLID. | |
| 1.3.6.1.2.1.155.2.1.4 | Groupdot3OmpeGroupStat | current | A collection of objects of dot3 OMP emulation Statistics. Objects are per LLID. | |
| 1.3.6.1.2.1.155.2.1.5 | Groupdot3EponFecGroupAll | current | A collection of objects of dot3 FEC group control and statistics. Objects are per LLID. | |
| 1.3.6.1.2.1.155.2.1.6 | Groupdot3ExtPkgGroupControl | current | A collection of objects of dot3ExtPkg control definition. Objects are per LLID. | |
| 1.3.6.1.2.1.155.2.1.7 | Groupdot3ExtPkgGroupQueue | current | A collection of objects of dot3ExtPkg Queue control. Objects are per LLID, per queue. | |
| 1.3.6.1.2.1.155.2.1.8 | Groupdot3ExtPkgGroupQueueSets | current | A collection of objects of dot3ExtPkg queue_set control. Objects are per LLID, per queue, per queue_set. | |
| 1.3.6.1.2.1.155.2.1.9 | Groupdot3ExtPkgGroupOptIf | current | A collection of objects of control and status indication of the optical interface. Objects are per LLID. | |
| 1.3.6.1.2.1.155.2.2 | Nodedot3EponCompliances | |||
| 1.3.6.1.2.1.155.2.2.1 | Compliancedot3MPCPCompliance | current | The compliance statement for Multi-Point Control Protocol interfaces. | |
| 1.3.6.1.2.1.155.2.2.2 | Compliancedot3OmpeCompliance | current | The compliance statement for OMPEmulation interfaces. | |
| 1.3.6.1.2.1.155.2.2.3 | Compliancedot3EponFecCompliance | current | The compliance statement for FEC EPON interfaces. This group is mandatory for all FEC supporting interfaces for control and statistics collection. | |
| 1.3.6.1.2.1.155.2.2.4 | Compliancedot3ExtPkgCompliance | current | The compliance statement for EPON Interfaces using the extended package. |