DPS-TEXT-RTU-MIB
21 objects
No module-level DESCRIPTION found.
Imported Objects
| DPS-MIB-V38 | dpsAlarmControl |
| SNMPv2-SMI | Integer32 NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2682.1.5 | NodedpsTEXTRTUv2 | |||
| 1.3.6.1.4.1.2682.1.5.1 | NodedpsTEXTRTUv2Ident | |||
| 1.3.6.1.4.1.2682.1.5.1.1 | ScalardpsTEXTRTUv2DateTime | read-write | current | The RTU system date and time. |
| 1.3.6.1.4.1.2682.1.5.1.2 | ScalardpsTEXTRTUv2DeviceType | read-only | current | Device type of far end SMS device as received in SMS messages to SMS receiver. ie NG216_G3 |
| 1.3.6.1.4.1.2682.1.5.1.3 | ScalardpsTEXTRTUv2Phone | read-only | current | The phone number of the far end or originating SMS RTU, only SMS RTUs will have/respond to this variable |
| 1.3.6.1.4.1.2682.1.5.2 | NodedpsTEXTRTUv2AlarmGrid | |||
| 1.3.6.1.4.1.2682.1.5.2.1 | ScalardpsTEXTRTUv2ADisplay | read-only | current | TEXT RTU display number. See the usermanual for display mapping information |
| 1.3.6.1.4.1.2682.1.5.2.2 | ScalardpsTEXTRTUv2APoint | read-only | current | TEXT RTU point number. See the usermanual for point mapping information |
| 1.3.6.1.4.1.2682.1.5.2.3 | ScalardpsTEXTRTUv2APntDesc | read-only | current | A description of this point. |
| 1.3.6.1.4.1.2682.1.5.2.4 | ScalardpsTEXTRTUv2AState | read-only | current | The current state of this point. |
| 1.3.6.1.4.1.2682.1.5.2.5 | ScalardpsTEXTRTUAnalogvalue | read-only | current | The current value of the channel. Will be blank if alarm is not from an analog source |
| 1.3.6.1.4.1.2682.1.5.2.6 | ScalardpsTEXTRTUAnalogthresholds | read-only | current | Highest threshold level crossed, if MJ, MN is assumed. Will be blank if alarm is not from an analog sources |
| 1.3.6.1.4.1.2682.1.5.3 | NodedpsTEXTRTUv2ControlGrid | |||
| 1.3.6.1.4.1.2682.1.5.3.1 | ScalardpsTEXTRTUv2CDisplay | read-write | current | RTU_port_address display number. |
| 1.3.6.1.4.1.2682.1.5.3.2 | ScalardpsTEXTRTUv2CPoint | read-write | current | RTU_port_display point number (1-64). |
| 1.3.6.1.4.1.2682.1.5.3.3 | ScalardpsTEXTRTUv2CMOMTime | read-write | current | Momentary latch time (in milliseconds). If value is blank, the default of 600ms will be used |
| 1.3.6.1.4.1.2682.1.5.3.4 | ScalardpsTEXTRTUv2CAction | read-write | current | Requested action. Latch, release, and momentary will affect relays. Sync(s) will resend traps for currently active alarms(TEXT RTU will ignore if invalid). |
| 1.3.6.1.4.1.2682.1.5.100 | NotificationdpsTEXTRTUv2AlarmSet | current | Generated when alarm is received from far end SMS device to SMS receiver. | |
| 1.3.6.1.4.1.2682.1.5.200 | NotificationdpsTEXTRTUv2AlarmClear | current | Generated when clear is received from far end SMS device to SMS receiver. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AnalogThresholds | INTEGER { noAlarms (0), minorUnder (1), minorOver (2), majorUnder (3), majorOver (4), notDetected (5) } | current | Highest threshold level crossed, if MJ, MN is assumed. Will be blank if alarm is not from an analog sources |
| RTUCAction | INTEGER { latch(1), release(2), momentary(3), syncStanding(4), syncAnalogs(5) } | current | Requested action. Latch, release, and momentary will affect relays. Sync(s) will resend traps for currently active alarms(TEXT RTU will ignore if invalid). |