MIB Viewer

DS1-MIB

131 objects
The MIB module to describe DS1, E1, DS2, and E2 interfaces objects.
Imported Objects
IF-MIBifIndex InterfaceIndex
PerfHist-TC-MIBPerfCurrentCount PerfIntervalCount PerfTotalCount
SNMPv2-CONFMODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMIMODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE transmission
SNMPv2-TCDisplayString TimeStamp TruthValue
OIDNameAccessStatusDescription
1.3.6.1.2.1.10.18Identityds1The MIB module to describe DS1, E1, DS2, and E2 interfaces objects.
1.3.6.1.2.1.10.18.6Tabledsx1ConfigTablenot-accessiblecurrentThe DS1 Configuration table.
1.3.6.1.2.1.10.18.6.1Rowdsx1ConfigEntrynot-accessiblecurrentAn entry in the DS1 Configuration table.
1.3.6.1.2.1.10.18.6.1.1Columndsx1LineIndexread-onlycurrentThis object should be made equal to ifIndex. The next paragraph describes its previous usage. Making the object equal to ifIndex allows proper use of ifStackTa…
1.3.6.1.2.1.10.18.6.1.2Columndsx1IfIndexread-onlydeprecatedThis value for this object is equal to the value of ifIndex from the Interfaces table of MIB II (RFC 1213).
1.3.6.1.2.1.10.18.6.1.3Columndsx1TimeElapsedread-onlycurrentThe number of seconds that have elapsed since the beginning of the near end current error- measurement period. If, for some reason, such as an adjustment in th…
1.3.6.1.2.1.10.18.6.1.4Columndsx1ValidIntervalsread-onlycurrentThe number of previous near end intervals for which data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, …
1.3.6.1.2.1.10.18.6.1.5Columndsx1LineTyperead-writecurrentThis variable indicates the variety of DS1 Line implementing this circuit. The type of circuit affects the number of bits per second that the circuit can reaso…
1.3.6.1.2.1.10.18.6.1.6Columndsx1LineCodingread-writecurrentThis variable describes the variety of Zero Code Suppression used on this interface, which in turn affects a number of its characteristics. dsx1JBZS refers the…
1.3.6.1.2.1.10.18.6.1.7Columndsx1SendCoderead-writecurrentThis variable indicates what type of code is being sent across the DS1 interface by the device. Setting this variable causes the interface to send the code req…
1.3.6.1.2.1.10.18.6.1.8Columndsx1CircuitIdentifierread-writecurrentThis variable contains the transmission vendor's circuit identifier, for the purpose of facilitating troubleshooting.
1.3.6.1.2.1.10.18.6.1.9Columndsx1LoopbackConfigread-writecurrentThis variable represents the desired loopback configuration of the DS1 interface. Agents supporting read/write access should return inconsistentValue in respon…
1.3.6.1.2.1.10.18.6.1.10Columndsx1LineStatusread-onlycurrentThis variable indicates the Line Status of the interface. It contains loopback, failure, received 'alarm' and transmitted 'alarms information. The dsx1LineStat…
1.3.6.1.2.1.10.18.6.1.11Columndsx1SignalModeread-writecurrent'none' indicates that no bits are reserved for signaling on this channel. 'robbedBit' indicates that DS1 Robbed Bit Sig- naling is in use. 'bitOriented' indica…
1.3.6.1.2.1.10.18.6.1.12Columndsx1TransmitClockSourceread-writecurrentThe source of Transmit Clock. 'loopTiming' indicates that the recovered re- ceive clock is used as the transmit clock. 'localTiming' indicates that a local clo…
1.3.6.1.2.1.10.18.6.1.13Columndsx1Fdlread-writecurrentThis bitmap describes the use of the facili- ties data link, and is the sum of the capabili- ties. Set any bits that are appropriate: other(1), dsx1AnsiT1403(2…
1.3.6.1.2.1.10.18.6.1.14Columndsx1InvalidIntervalsread-onlycurrentThe number of intervals in the range from 0 to dsx1ValidIntervals for which no data is available. This object will typically be zero except in cases where the …
1.3.6.1.2.1.10.18.6.1.15Columndsx1LineLengthread-writecurrentThe length of the ds1 line in meters. This objects provides information for line build out circuitry. This object is only useful if the interface has configura…
1.3.6.1.2.1.10.18.6.1.16Columndsx1LineStatusLastChangeread-onlycurrentThe value of MIB II's sysUpTime object at the time this DS1 entered its current line status state. If the current state was entered prior to the last re-initia…
1.3.6.1.2.1.10.18.6.1.17Columndsx1LineStatusChangeTrapEnableread-writecurrentIndicates whether dsx1LineStatusChange traps should be generated for this interface.
1.3.6.1.2.1.10.18.6.1.18Columndsx1LoopbackStatusread-onlycurrentThis variable represents the current state of the loopback on the DS1 interface. It contains information about loopbacks established by a manager and remotely …
1.3.6.1.2.1.10.18.6.1.19Columndsx1Ds1ChannelNumberread-onlycurrentThis variable represents the channel number of the DS1/E1 on its parent Ds2/E2 or DS3/E3. A value of 0 indicated this DS1/E1 does not have a parent DS3/E3.
1.3.6.1.2.1.10.18.6.1.20Columndsx1Channelizationread-writecurrentIndicates whether this ds1/e1 is channelized or unchannelized. The value of enabledDs0 indicates that this is a DS1 channelized into DS0s. The value of enabled…
1.3.6.1.2.1.10.18.7Tabledsx1CurrentTablenot-accessiblecurrentThe DS1 current table contains various statistics being collected for the current 15 minute interval.
1.3.6.1.2.1.10.18.7.1Rowdsx1CurrentEntrynot-accessiblecurrentAn entry in the DS1 Current table.
1.3.6.1.2.1.10.18.7.1.1Columndsx1CurrentIndexread-onlycurrentThe index value which uniquely identifies the DS1 interface to which this entry is applicable. The interface identified by a particular value of this index is …
1.3.6.1.2.1.10.18.7.1.2Columndsx1CurrentESsread-onlycurrentThe number of Errored Seconds.
1.3.6.1.2.1.10.18.7.1.3Columndsx1CurrentSESsread-onlycurrentThe number of Severely Errored Seconds.
1.3.6.1.2.1.10.18.7.1.4Columndsx1CurrentSEFSsread-onlycurrentThe number of Severely Errored Framing Seconds.
1.3.6.1.2.1.10.18.7.1.5Columndsx1CurrentUASsread-onlycurrentThe number of Unavailable Seconds.
1.3.6.1.2.1.10.18.7.1.6Columndsx1CurrentCSSsread-onlycurrentThe number of Controlled Slip Seconds.
1.3.6.1.2.1.10.18.7.1.7Columndsx1CurrentPCVsread-onlycurrentThe number of Path Coding Violations.
1.3.6.1.2.1.10.18.7.1.8Columndsx1CurrentLESsread-onlycurrentThe number of Line Errored Seconds.
1.3.6.1.2.1.10.18.7.1.9Columndsx1CurrentBESsread-onlycurrentThe number of Bursty Errored Seconds.
1.3.6.1.2.1.10.18.7.1.10Columndsx1CurrentDMsread-onlycurrentThe number of Degraded Minutes.
1.3.6.1.2.1.10.18.7.1.11Columndsx1CurrentLCVsread-onlycurrentThe number of Line Code Violations (LCVs).
1.3.6.1.2.1.10.18.8Tabledsx1IntervalTablenot-accessiblecurrentThe DS1 Interval Table contains various statistics collected by each DS1 Interface over the previous 24 hours of operation. The past 24 hours are broken into 9…
1.3.6.1.2.1.10.18.8.1Rowdsx1IntervalEntrynot-accessiblecurrentAn entry in the DS1 Interval table.
1.3.6.1.2.1.10.18.8.1.1Columndsx1IntervalIndexread-onlycurrentThe index value which uniquely identifies the DS1 interface to which this entry is applicable. The interface identified by a particular value of this index is …
1.3.6.1.2.1.10.18.8.1.2Columndsx1IntervalNumberread-onlycurrentA number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the 15 minutes interval completed 23 hours and 45 minutes prior …
1.3.6.1.2.1.10.18.8.1.3Columndsx1IntervalESsread-onlycurrentThe number of Errored Seconds.
1.3.6.1.2.1.10.18.8.1.4Columndsx1IntervalSESsread-onlycurrentThe number of Severely Errored Seconds.
1.3.6.1.2.1.10.18.8.1.5Columndsx1IntervalSEFSsread-onlycurrentThe number of Severely Errored Framing Seconds.
1.3.6.1.2.1.10.18.8.1.6Columndsx1IntervalUASsread-onlycurrentThe number of Unavailable Seconds. This object may decrease if the occurance of unavailable seconds occurs across an inteval boundary.
1.3.6.1.2.1.10.18.8.1.7Columndsx1IntervalCSSsread-onlycurrentThe number of Controlled Slip Seconds.
1.3.6.1.2.1.10.18.8.1.8Columndsx1IntervalPCVsread-onlycurrentThe number of Path Coding Violations.
1.3.6.1.2.1.10.18.8.1.9Columndsx1IntervalLESsread-onlycurrentThe number of Line Errored Seconds.
1.3.6.1.2.1.10.18.8.1.10Columndsx1IntervalBESsread-onlycurrentThe number of Bursty Errored Seconds.
1.3.6.1.2.1.10.18.8.1.11Columndsx1IntervalDMsread-onlycurrentThe number of Degraded Minutes.
1.3.6.1.2.1.10.18.8.1.12Columndsx1IntervalLCVsread-onlycurrentThe number of Line Code Violations.
1.3.6.1.2.1.10.18.8.1.13Columndsx1IntervalValidDataread-onlycurrentThis variable indicates if the data for this interval is valid.
1.3.6.1.2.1.10.18.9Tabledsx1TotalTablenot-accessiblecurrentThe DS1 Total Table contains the cumulative sum of the various statistics for the 24 hour period preceding the current interval.
1.3.6.1.2.1.10.18.9.1Rowdsx1TotalEntrynot-accessiblecurrentAn entry in the DS1 Total table.
1.3.6.1.2.1.10.18.9.1.1Columndsx1TotalIndexread-onlycurrentThe index value which uniquely identifies the DS1 interface to which this entry is applicable. The interface identified by a particular value of this index is …
1.3.6.1.2.1.10.18.9.1.2Columndsx1TotalESsread-onlycurrentThe sum of Errored Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.
1.3.6.1.2.1.10.18.9.1.3Columndsx1TotalSESsread-onlycurrentThe number of Severely Errored Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.
1.3.6.1.2.1.10.18.9.1.4Columndsx1TotalSEFSsread-onlycurrentThe number of Severely Errored Framing Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.
1.3.6.1.2.1.10.18.9.1.5Columndsx1TotalUASsread-onlycurrentThe number of Unavailable Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.
1.3.6.1.2.1.10.18.9.1.6Columndsx1TotalCSSsread-onlycurrentThe number of Controlled Slip Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.
1.3.6.1.2.1.10.18.9.1.7Columndsx1TotalPCVsread-onlycurrentThe number of Path Coding Violations encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.
1.3.6.1.2.1.10.18.9.1.8Columndsx1TotalLESsread-onlycurrentThe number of Line Errored Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.
1.3.6.1.2.1.10.18.9.1.9Columndsx1TotalBESsread-onlycurrentThe number of Bursty Errored Seconds (BESs) encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.
1.3.6.1.2.1.10.18.9.1.10Columndsx1TotalDMsread-onlycurrentThe number of Degraded Minutes (DMs) encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.
1.3.6.1.2.1.10.18.9.1.11Columndsx1TotalLCVsread-onlycurrentThe number of Line Code Violations (LCVs) encountered by a DS1 interface in the current 15 minute interval. Invalid 15 minute intervals count as 0.
1.3.6.1.2.1.10.18.10Tabledsx1FarEndCurrentTablenot-accessiblecurrentThe DS1 Far End Current table contains various statistics being collected for the current 15 minute interval. The statistics are collected from the far end mes…
1.3.6.1.2.1.10.18.10.1Rowdsx1FarEndCurrentEntrynot-accessiblecurrentAn entry in the DS1 Far End Current table.
1.3.6.1.2.1.10.18.10.1.1Columndsx1FarEndCurrentIndexread-onlycurrentThe index value which uniquely identifies the DS1 interface to which this entry is applicable. The interface identified by a particular value of this index is …
1.3.6.1.2.1.10.18.10.1.2Columndsx1FarEndTimeElapsedread-onlycurrentThe number of seconds that have elapsed since the beginning of the far end current error-measurement period. If, for some reason, such as an adjustment in the …
1.3.6.1.2.1.10.18.10.1.3Columndsx1FarEndValidIntervalsread-onlycurrentThe number of previous far end intervals for which data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, i…
1.3.6.1.2.1.10.18.10.1.4Columndsx1FarEndCurrentESsread-onlycurrentThe number of Far End Errored Seconds.
1.3.6.1.2.1.10.18.10.1.5Columndsx1FarEndCurrentSESsread-onlycurrentThe number of Far End Severely Errored Seconds.
1.3.6.1.2.1.10.18.10.1.6Columndsx1FarEndCurrentSEFSsread-onlycurrentThe number of Far End Severely Errored Framing Seconds.
1.3.6.1.2.1.10.18.10.1.7Columndsx1FarEndCurrentUASsread-onlycurrentThe number of Unavailable Seconds.
1.3.6.1.2.1.10.18.10.1.8Columndsx1FarEndCurrentCSSsread-onlycurrentThe number of Far End Controlled Slip Seconds.
1.3.6.1.2.1.10.18.10.1.9Columndsx1FarEndCurrentLESsread-onlycurrentThe number of Far End Line Errored Seconds.
1.3.6.1.2.1.10.18.10.1.10Columndsx1FarEndCurrentPCVsread-onlycurrentThe number of Far End Path Coding Violations.
1.3.6.1.2.1.10.18.10.1.11Columndsx1FarEndCurrentBESsread-onlycurrentThe number of Far End Bursty Errored Seconds.
1.3.6.1.2.1.10.18.10.1.12Columndsx1FarEndCurrentDMsread-onlycurrentThe number of Far End Degraded Minutes.
1.3.6.1.2.1.10.18.10.1.13Columndsx1FarEndInvalidIntervalsread-onlycurrentThe number of intervals in the range from 0 to dsx1FarEndValidIntervals for which no data is available. This object will typically be zero except in cases wher…
1.3.6.1.2.1.10.18.11Tabledsx1FarEndIntervalTablenot-accessiblecurrentThe DS1 Far End Interval Table contains various statistics collected by each DS1 interface over the previous 24 hours of operation. The past 24 hours are broke…
1.3.6.1.2.1.10.18.11.1Rowdsx1FarEndIntervalEntrynot-accessiblecurrentAn entry in the DS1 Far End Interval table.
1.3.6.1.2.1.10.18.11.1.1Columndsx1FarEndIntervalIndexread-onlycurrentThe index value which uniquely identifies the DS1 interface to which this entry is applicable. The interface identified by a particular value of this index is …
1.3.6.1.2.1.10.18.11.1.2Columndsx1FarEndIntervalNumberread-onlycurrentA number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the 15 minutes interval completed 23 hours and 45 minutes prior …
1.3.6.1.2.1.10.18.11.1.3Columndsx1FarEndIntervalESsread-onlycurrentThe number of Far End Errored Seconds.
1.3.6.1.2.1.10.18.11.1.4Columndsx1FarEndIntervalSESsread-onlycurrentThe number of Far End Severely Errored Seconds.
1.3.6.1.2.1.10.18.11.1.5Columndsx1FarEndIntervalSEFSsread-onlycurrentThe number of Far End Severely Errored Framing Seconds.
1.3.6.1.2.1.10.18.11.1.6Columndsx1FarEndIntervalUASsread-onlycurrentThe number of Unavailable Seconds.
1.3.6.1.2.1.10.18.11.1.7Columndsx1FarEndIntervalCSSsread-onlycurrentThe number of Far End Controlled Slip Seconds.
1.3.6.1.2.1.10.18.11.1.8Columndsx1FarEndIntervalLESsread-onlycurrentThe number of Far End Line Errored Seconds.
1.3.6.1.2.1.10.18.11.1.9Columndsx1FarEndIntervalPCVsread-onlycurrentThe number of Far End Path Coding Violations.
1.3.6.1.2.1.10.18.11.1.10Columndsx1FarEndIntervalBESsread-onlycurrentThe number of Far End Bursty Errored Seconds.
1.3.6.1.2.1.10.18.11.1.11Columndsx1FarEndIntervalDMsread-onlycurrentThe number of Far End Degraded Minutes.
1.3.6.1.2.1.10.18.11.1.12Columndsx1FarEndIntervalValidDataread-onlycurrentThis variable indicates if the data for this interval is valid.
1.3.6.1.2.1.10.18.12Tabledsx1FarEndTotalTablenot-accessiblecurrentThe DS1 Far End Total Table contains the cumulative sum of the various statistics for the 24 hour period preceding the current interval.
1.3.6.1.2.1.10.18.12.1Rowdsx1FarEndTotalEntrynot-accessiblecurrentAn entry in the DS1 Far End Total table.
1.3.6.1.2.1.10.18.12.1.1Columndsx1FarEndTotalIndexread-onlycurrentThe index value which uniquely identifies the DS1 interface to which this entry is applicable. The interface identified by a particular value of this index is …
1.3.6.1.2.1.10.18.12.1.2Columndsx1FarEndTotalESsread-onlycurrentThe number of Far End Errored Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.
1.3.6.1.2.1.10.18.12.1.3Columndsx1FarEndTotalSESsread-onlycurrentThe number of Far End Severely Errored Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.
1.3.6.1.2.1.10.18.12.1.4Columndsx1FarEndTotalSEFSsread-onlycurrentThe number of Far End Severely Errored Framing Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.
1.3.6.1.2.1.10.18.12.1.5Columndsx1FarEndTotalUASsread-onlycurrentThe number of Unavailable Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.
1.3.6.1.2.1.10.18.12.1.6Columndsx1FarEndTotalCSSsread-onlycurrentThe number of Far End Controlled Slip Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.
1.3.6.1.2.1.10.18.12.1.7Columndsx1FarEndTotalLESsread-onlycurrentThe number of Far End Line Errored Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.
1.3.6.1.2.1.10.18.12.1.8Columndsx1FarEndTotalPCVsread-onlycurrentThe number of Far End Path Coding Violations reported via the far end block error count encountered by a DS1 interface in the previous 24 hour interval. Invali…
1.3.6.1.2.1.10.18.12.1.9Columndsx1FarEndTotalBESsread-onlycurrentThe number of Bursty Errored Seconds (BESs) encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.
1.3.6.1.2.1.10.18.12.1.10Columndsx1FarEndTotalDMsread-onlycurrentThe number of Degraded Minutes (DMs) encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.
1.3.6.1.2.1.10.18.13Tabledsx1FracTablenot-accessibledeprecatedThis table is deprecated in favour of using ifStackTable. The table was mandatory for systems dividing a DS1 into channels containing different data streams th…
1.3.6.1.2.1.10.18.13.1Rowdsx1FracEntrynot-accessibledeprecatedAn entry in the DS1 Fractional table.
1.3.6.1.2.1.10.18.13.1.1Columndsx1FracIndexread-onlydeprecatedThe index value which uniquely identifies the DS1 interface to which this entry is applicable The interface identified by a particular value of this index is t…
1.3.6.1.2.1.10.18.13.1.2Columndsx1FracNumberread-onlydeprecatedThe channel number for this entry.
1.3.6.1.2.1.10.18.13.1.3Columndsx1FracIfIndexread-writedeprecatedAn index value that uniquely identifies an interface. The interface identified by a particular value of this index is the same interface as identified by the s…
1.3.6.1.2.1.10.18.14Nodeds1Conformance
1.3.6.1.2.1.10.18.14.1Nodeds1Groups
1.3.6.1.2.1.10.18.14.1.1Groupds1NearEndConfigGroupcurrentA collection of objects providing configuration information applicable to all DS1 interfaces.
1.3.6.1.2.1.10.18.14.1.2Groupds1NearEndStatisticsGroupcurrentA collection of objects providing statistics information applicable to all DS1 interfaces.
1.3.6.1.2.1.10.18.14.1.3Groupds1FarEndGroupcurrentA collection of objects providing remote configuration and statistics information.
1.3.6.1.2.1.10.18.14.1.4Groupds1DeprecatedGroupdeprecatedA collection of obsolete objects that may be implemented for backwards compatibility.
1.3.6.1.2.1.10.18.14.1.5Groupds1NearEndOptionalConfigGroupcurrentA collection of objects that may be implemented on DS1 and DS2 interfaces.
1.3.6.1.2.1.10.18.14.1.6Groupds1DS2GroupcurrentA collection of objects providing information about DS2 (6,312 kbps) and E2 (8,448 kbps) systems.
1.3.6.1.2.1.10.18.14.1.7Groupds1TransStatsGroupcurrentA collection of objects which are the statistics which can be collected from a ds1 interface that is running transparent or unframed lineType. Statistics not i…
1.3.6.1.2.1.10.18.14.1.8Groupds1NearEndOptionalTrapGroupcurrentA collection of notifications that may be implemented on DS1 and DS2 interfaces.
1.3.6.1.2.1.10.18.14.1.9Groupds1ChanMappingGroupcurrentA collection of objects that give an mapping of DS3 Channel (ds1ChannelNumber) to ifIndex.
1.3.6.1.2.1.10.18.14.2Nodeds1Compliances
1.3.6.1.2.1.10.18.14.2.1Complianceds1Complianceread-onlycurrentThe compliance statement for T1 and E1 interfaces.
1.3.6.1.2.1.10.18.14.2.2Complianceds1MibT1PriComplianceread-onlycurrentCompliance statement for using this MIB for ISDN Primary Rate interfaces on T1 lines.
1.3.6.1.2.1.10.18.14.2.3Complianceds1MibE1PriComplianceread-onlycurrentCompliance statement for using this MIB for ISDN Primary Rate interfaces on E1 lines.
1.3.6.1.2.1.10.18.14.2.4Complianceds1Ds2Complianceread-onlycurrentCompliance statement for using this MIB for DS2 interfaces.
1.3.6.1.2.1.10.18.15Nodeds1Traps
1.3.6.1.2.1.10.18.15.0.1Notificationdsx1LineStatusChangecurrentA dsx1LineStatusChange trap is sent when the value of an instance dsx1LineStatus changes. It can be utilized by an NMS to trigger polls. When the line status c…
1.3.6.1.2.1.10.18.16Tabledsx1ChanMappingTablenot-accessiblecurrentThe DS1 Channel Mapping table. This table maps a DS1 channel number on a particular DS3 into an ifIndex. In the presence of DS2s, this table can be used to map…
1.3.6.1.2.1.10.18.16.1Rowdsx1ChanMappingEntrynot-accessiblecurrentAn entry in the DS1 Channel Mapping table. There is an entry in this table corresponding to each ds1 ifEntry within any interface that is channelized to the in…
1.3.6.1.2.1.10.18.16.1.1Columndsx1ChanMappedIfIndexread-onlycurrentThis object indicates the ifIndex value assigned by the agent for the individual ds1 ifEntry that corresponds to the given DS1 channel number (specified by the…
MIB Viewer