DS3-MIB
113 objects
The is the MIB module that describes DS3 and E3 interfaces objects. Copyright (c) The Internet Society (2004). This version of this MIB module is part of RFC 3896 </rfcs/rfc3896.html>; see the RFC itself for full legal notices.
Imported Objects
| IF-MIB | InterfaceIndex |
| PerfHist-TC-MIB | PerfCurrentCount PerfIntervalCount PerfTotalCount |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE transmission |
| SNMPv2-TC | DisplayString TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.30 | Identityds3 | The is the MIB module that describes DS3 and E3 interfaces objects. Copyright (c) The Internet Society (2004). This version of this MIB module is part of RFC 3… | ||
| 1.3.6.1.2.1.10.30.5 | Tabledsx3ConfigTable | not-accessible | current | The DS3/E3 Configuration table. |
| 1.3.6.1.2.1.10.30.5.1 | Rowdsx3ConfigEntry | not-accessible | current | An entry in the DS3/E3 Configuration table. |
| 1.3.6.1.2.1.10.30.5.1.1 | Columndsx3LineIndex | read-only | current | This object should be made equal to ifIndex. The next paragraph describes its previous usage. Making the object equal to ifIndex allows proper use of ifStackTa… |
| 1.3.6.1.2.1.10.30.5.1.2 | Columndsx3IfIndex | read-only | deprecated | This value for this object is equal to the value of ifIndex from the Interfaces table of MIB II (RFC 1213 </rfcs/rfc1213.html>). |
| 1.3.6.1.2.1.10.30.5.1.3 | Columndsx3TimeElapsed | read-only | current | The number of seconds that have elapsed since the beginning of the near end current error- measurement period. If, for some reason, such as an adjustment in th… |
| 1.3.6.1.2.1.10.30.5.1.4 | Columndsx3ValidIntervals | read-only | current | The number of previous near end intervals for which data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, … |
| 1.3.6.1.2.1.10.30.5.1.5 | Columndsx3LineType | read-write | current | This variable indicates the variety of DS3 C-bit or E3 application implementing this interface. The type of interface affects the interpretation of the usage a… |
| 1.3.6.1.2.1.10.30.5.1.6 | Columndsx3LineCoding | read-write | current | This variable describes the variety of Zero Code Suppression used on this interface, which in turn affects a number of its characteristics. dsx3B3ZS and e3HDB3… |
| 1.3.6.1.2.1.10.30.5.1.7 | Columndsx3SendCode | read-write | current | This variable indicates what type of code is being sent across the DS3/E3 interface by the device. (These are optional for E3 interfaces.) Setting this variabl… |
| 1.3.6.1.2.1.10.30.5.1.8 | Columndsx3CircuitIdentifier | read-write | current | This variable contains the transmission vendor's circuit identifier, for the purpose of facilitating troubleshooting. |
| 1.3.6.1.2.1.10.30.5.1.9 | Columndsx3LoopbackConfig | read-write | current | This variable represents the desired loopback configuration of the DS3/E3 interface. The values mean: dsx3NoLoop Not in the loopback state. A device that is no… |
| 1.3.6.1.2.1.10.30.5.1.10 | Columndsx3LineStatus | read-only | current | This variable indicates the Line Status of the interface. It contains loopback state information and failure state information. The dsx3LineStatus is a bit map… |
| 1.3.6.1.2.1.10.30.5.1.11 | Columndsx3TransmitClockSource | read-write | current | The source of Transmit Clock. loopTiming indicates that the recovered receive clock is used as the transmit clock. localTiming indicates that a local clock sou… |
| 1.3.6.1.2.1.10.30.5.1.12 | Columndsx3InvalidIntervals | read-only | current | The number of intervals in the range from 0 to dsx3ValidIntervals for which no data is available. This object will typically be zero except in cases where the … |
| 1.3.6.1.2.1.10.30.5.1.13 | Columndsx3LineLength | read-write | current | The length of the ds3 line in meters. This object provides information for line build out circuitry if it exists and can use this object to adjust the line bui… |
| 1.3.6.1.2.1.10.30.5.1.14 | Columndsx3LineStatusLastChange | read-only | current | The value of MIB II's sysUpTime object at the time this DS3/E3 entered its current line status state. If the current state was entered prior to the last re-ini… |
| 1.3.6.1.2.1.10.30.5.1.15 | Columndsx3LineStatusChangeTrapEnable | read-write | current | Indicates whether dsx3LineStatusChange traps should be generated for this interface. |
| 1.3.6.1.2.1.10.30.5.1.16 | Columndsx3LoopbackStatus | read-only | current | This variable represents the current state of the loopback on the DS3 interface. It contains information about loopbacks established by a manager and remotely … |
| 1.3.6.1.2.1.10.30.5.1.17 | Columndsx3Channelization | read-write | current | Indicates whether this ds3/e3 is channelized or unchannelized. The value of enabledDs1 indicates that this is a DS3 channelized into DS1s. The value of enabled… |
| 1.3.6.1.2.1.10.30.5.1.18 | Columndsx3Ds1ForRemoteLoop | read-write | current | Indicates which DS1/E1 on this DS3/E3 will be indicated in the remote ds1 loopback request. A value of 0 means no DS1 will be looped. A value of 29 means all D… |
| 1.3.6.1.2.1.10.30.6 | Tabledsx3CurrentTable | not-accessible | current | The DS3/E3 current table contains various statistics being collected for the current 15 minute interval. |
| 1.3.6.1.2.1.10.30.6.1 | Rowdsx3CurrentEntry | not-accessible | current | An entry in the DS3/E3 Current table. |
| 1.3.6.1.2.1.10.30.6.1.1 | Columndsx3CurrentIndex | read-only | current | The index value which uniquely identifies the DS3/E3 interface to which this entry is applicable. The interface identified by a particular value of this index … |
| 1.3.6.1.2.1.10.30.6.1.2 | Columndsx3CurrentPESs | read-only | current | The counter associated with the number of P-bit Errored Seconds. |
| 1.3.6.1.2.1.10.30.6.1.3 | Columndsx3CurrentPSESs | read-only | current | The counter associated with the number of P-bit Severely Errored Seconds. |
| 1.3.6.1.2.1.10.30.6.1.4 | Columndsx3CurrentSEFSs | read-only | current | The counter associated with the number of Severely Errored Framing Seconds. |
| 1.3.6.1.2.1.10.30.6.1.5 | Columndsx3CurrentUASs | read-only | current | The counter associated with the number of Unavailable Seconds. |
| 1.3.6.1.2.1.10.30.6.1.6 | Columndsx3CurrentLCVs | read-only | current | The counter associated with the number of Line Coding Violations. |
| 1.3.6.1.2.1.10.30.6.1.7 | Columndsx3CurrentPCVs | read-only | current | The counter associated with the number of P-bit Coding Violations. |
| 1.3.6.1.2.1.10.30.6.1.8 | Columndsx3CurrentLESs | read-only | current | The number of Line Errored Seconds. |
| 1.3.6.1.2.1.10.30.6.1.9 | Columndsx3CurrentCCVs | read-only | current | The number of C-bit Coding Violations. |
| 1.3.6.1.2.1.10.30.6.1.10 | Columndsx3CurrentCESs | read-only | current | The number of C-bit Errored Seconds. |
| 1.3.6.1.2.1.10.30.6.1.11 | Columndsx3CurrentCSESs | read-only | current | The number of C-bit Severely Errored Seconds. |
| 1.3.6.1.2.1.10.30.7 | Tabledsx3IntervalTable | not-accessible | current | The DS3/E3 Interval Table contains various statistics collected by each DS3/E3 Interface over the previous 24 hours of operation. The past 24 hours are broken … |
| 1.3.6.1.2.1.10.30.7.1 | Rowdsx3IntervalEntry | not-accessible | current | An entry in the DS3/E3 Interval table. |
| 1.3.6.1.2.1.10.30.7.1.1 | Columndsx3IntervalIndex | read-only | current | The index value which uniquely identifies the DS3/E3 interface to which this entry is applicable. The interface identified by a particular value of this index … |
| 1.3.6.1.2.1.10.30.7.1.2 | Columndsx3IntervalNumber | read-only | current | A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the 15 minutes interval completed 23 hours and 45 minutes prior … |
| 1.3.6.1.2.1.10.30.7.1.3 | Columndsx3IntervalPESs | read-only | current | The counter associated with the number of P-bit Errored Seconds. |
| 1.3.6.1.2.1.10.30.7.1.4 | Columndsx3IntervalPSESs | read-only | current | The counter associated with the number of P-bit Severely Errored Seconds. |
| 1.3.6.1.2.1.10.30.7.1.5 | Columndsx3IntervalSEFSs | read-only | current | The counter associated with the number of Severely Errored Framing Seconds. |
| 1.3.6.1.2.1.10.30.7.1.6 | Columndsx3IntervalUASs | read-only | current | The counter associated with the number of Unavailable Seconds. This object may decrease if the occurrence of unavailable seconds occurs across an interval boun… |
| 1.3.6.1.2.1.10.30.7.1.7 | Columndsx3IntervalLCVs | read-only | current | The counter associated with the number of Line Coding Violations. |
| 1.3.6.1.2.1.10.30.7.1.8 | Columndsx3IntervalPCVs | read-only | current | The counter associated with the number of P-bit Coding Violations. |
| 1.3.6.1.2.1.10.30.7.1.9 | Columndsx3IntervalLESs | read-only | current | The number of Line Errored Seconds (BPVs or illegal zero sequences). |
| 1.3.6.1.2.1.10.30.7.1.10 | Columndsx3IntervalCCVs | read-only | current | The number of C-bit Coding Violations. |
| 1.3.6.1.2.1.10.30.7.1.11 | Columndsx3IntervalCESs | read-only | current | The number of C-bit Errored Seconds. |
| 1.3.6.1.2.1.10.30.7.1.12 | Columndsx3IntervalCSESs | read-only | current | The number of C-bit Severely Errored Seconds. |
| 1.3.6.1.2.1.10.30.7.1.13 | Columndsx3IntervalValidData | read-only | current | This variable indicates if the data for this interval is valid. |
| 1.3.6.1.2.1.10.30.8 | Tabledsx3TotalTable | not-accessible | current | The DS3/E3 Total Table contains the cumulative sum of the various statistics for the 24 hour period preceding the current interval. |
| 1.3.6.1.2.1.10.30.8.1 | Rowdsx3TotalEntry | not-accessible | current | An entry in the DS3/E3 Total table. |
| 1.3.6.1.2.1.10.30.8.1.1 | Columndsx3TotalIndex | read-only | current | The index value which uniquely identifies the DS3/E3 interface to which this entry is applicable. The interface identified by a particular value of this index … |
| 1.3.6.1.2.1.10.30.8.1.2 | Columndsx3TotalPESs | read-only | current | The counter associated with the number of P-bit Errored Seconds, encountered by a DS3 interface in the previous 24 hour interval. Invalid 15 minute intervals c… |
| 1.3.6.1.2.1.10.30.8.1.3 | Columndsx3TotalPSESs | read-only | current | The counter associated with the number of P-bit Severely Errored Seconds, encountered by a DS3 interface in the previous 24 hour interval. Invalid 15 minute in… |
| 1.3.6.1.2.1.10.30.8.1.4 | Columndsx3TotalSEFSs | read-only | current | The counter associated with the number of Severely Errored Framing Seconds, encountered by a DS3/E3 interface in the previous 24 hour interval. Invalid 15 minu… |
| 1.3.6.1.2.1.10.30.8.1.5 | Columndsx3TotalUASs | read-only | current | The counter associated with the number of Unavailable Seconds, encountered by a DS3 interface in the previous 24 hour interval. Invalid 15 minute intervals cou… |
| 1.3.6.1.2.1.10.30.8.1.6 | Columndsx3TotalLCVs | read-only | current | The counter associated with the number of Line Coding Violations encountered by a DS3/E3 interface in the previous 24 hour interval. Invalid 15 minute interval… |
| 1.3.6.1.2.1.10.30.8.1.7 | Columndsx3TotalPCVs | read-only | current | The counter associated with the number of P-bit Coding Violations, encountered by a DS3 interface in the previous 24 hour interval. Invalid 15 minute intervals… |
| 1.3.6.1.2.1.10.30.8.1.8 | Columndsx3TotalLESs | read-only | current | The number of Line Errored Seconds (BPVs or illegal zero sequences) encountered by a DS3/E3 interface in the previous 24 hour interval. Invalid 15 minute inter… |
| 1.3.6.1.2.1.10.30.8.1.9 | Columndsx3TotalCCVs | read-only | current | The number of C-bit Coding Violations encountered by a DS3 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. |
| 1.3.6.1.2.1.10.30.8.1.10 | Columndsx3TotalCESs | read-only | current | The number of C-bit Errored Seconds encountered by a DS3 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. |
| 1.3.6.1.2.1.10.30.8.1.11 | Columndsx3TotalCSESs | read-only | current | The number of C-bit Severely Errored Seconds encountered by a DS3 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. |
| 1.3.6.1.2.1.10.30.9 | Tabledsx3FarEndConfigTable | not-accessible | current | The DS3 Far End Configuration Table contains configuration information reported in the C-bits from the remote end. |
| 1.3.6.1.2.1.10.30.9.1 | Rowdsx3FarEndConfigEntry | not-accessible | current | An entry in the DS3 Far End Configuration table. |
| 1.3.6.1.2.1.10.30.9.1.1 | Columndsx3FarEndLineIndex | read-only | current | The index value which uniquely identifies the DS3 interface to which this entry is applicable. The interface identified by a particular value of this index is … |
| 1.3.6.1.2.1.10.30.9.1.2 | Columndsx3FarEndEquipCode | read-write | current | This is the Far End Equipment Identification code that describes the specific piece of equipment. It is sent within the Path Identification Message. |
| 1.3.6.1.2.1.10.30.9.1.3 | Columndsx3FarEndLocationIDCode | read-write | current | This is the Far End Location Identification code that describes the specific location of the equipment. It is sent within the Path Identification Message. |
| 1.3.6.1.2.1.10.30.9.1.4 | Columndsx3FarEndFrameIDCode | read-write | current | This is the Far End Frame Identification code that identifies where the equipment is located within a building at a given location. It is sent within the Path … |
| 1.3.6.1.2.1.10.30.9.1.5 | Columndsx3FarEndUnitCode | read-write | current | This is the Far End code that identifies the equipment location within a bay. It is sent within the Path Identification Message. |
| 1.3.6.1.2.1.10.30.9.1.6 | Columndsx3FarEndFacilityIDCode | read-write | current | This code identifies a specific Far End DS3 path. It is sent within the Path Identification Message. |
| 1.3.6.1.2.1.10.30.10 | Tabledsx3FarEndCurrentTable | not-accessible | current | The DS3 Far End Current table contains various statistics being collected for the current 15 minute interval. The statistics are collected from the far end blo… |
| 1.3.6.1.2.1.10.30.10.1 | Rowdsx3FarEndCurrentEntry | not-accessible | current | An entry in the DS3 Far End Current table. |
| 1.3.6.1.2.1.10.30.10.1.1 | Columndsx3FarEndCurrentIndex | read-only | current | The index value which uniquely identifies the DS3 interface to which this entry is applicable. The interface identified by a particular value of this index is … |
| 1.3.6.1.2.1.10.30.10.1.2 | Columndsx3FarEndTimeElapsed | read-only | current | The number of seconds that have elapsed since the beginning of the far end current error-measurement period. If, for some reason, such as an adjustment in the … |
| 1.3.6.1.2.1.10.30.10.1.3 | Columndsx3FarEndValidIntervals | read-only | current | The number of previous far end intervals for which data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, i… |
| 1.3.6.1.2.1.10.30.10.1.4 | Columndsx3FarEndCurrentCESs | read-only | current | The counter associated with the number of Far End C-bit Errored Seconds. |
| 1.3.6.1.2.1.10.30.10.1.5 | Columndsx3FarEndCurrentCSESs | read-only | current | The counter associated with the number of Far End C-bit Severely Errored Seconds. |
| 1.3.6.1.2.1.10.30.10.1.6 | Columndsx3FarEndCurrentCCVs | read-only | current | The counter associated with the number of Far End C-bit Coding Violations reported via the far end block error count. |
| 1.3.6.1.2.1.10.30.10.1.7 | Columndsx3FarEndCurrentUASs | read-only | current | The counter associated with the number of Far End unavailable seconds. |
| 1.3.6.1.2.1.10.30.10.1.8 | Columndsx3FarEndInvalidIntervals | read-only | current | The number of intervals in the range from 0 to dsx3FarEndValidIntervals for which no data is available. This object will typically be zero except in cases wher… |
| 1.3.6.1.2.1.10.30.11 | Tabledsx3FarEndIntervalTable | not-accessible | current | The DS3 Far End Interval Table contains various statistics collected by each DS3 interface over the previous 24 hours of operation. The past 24 hours are broke… |
| 1.3.6.1.2.1.10.30.11.1 | Rowdsx3FarEndIntervalEntry | not-accessible | current | An entry in the DS3 Far End Interval table. |
| 1.3.6.1.2.1.10.30.11.1.1 | Columndsx3FarEndIntervalIndex | read-only | current | The index value which uniquely identifies the DS3 interface to which this entry is applicable. The interface identified by a particular value of this index is … |
| 1.3.6.1.2.1.10.30.11.1.2 | Columndsx3FarEndIntervalNumber | read-only | current | A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the 15 minutes interval completed 23 hours and 45 minutes prior … |
| 1.3.6.1.2.1.10.30.11.1.3 | Columndsx3FarEndIntervalCESs | read-only | current | The counter associated with the number of Far End C-bit Errored Seconds encountered by a DS3 interface in one of the previous 96, individual 15 minute, interva… |
| 1.3.6.1.2.1.10.30.11.1.4 | Columndsx3FarEndIntervalCSESs | read-only | current | The counter associated with the number of Far End C-bit Severely Errored Seconds. |
| 1.3.6.1.2.1.10.30.11.1.5 | Columndsx3FarEndIntervalCCVs | read-only | current | The counter associated with the number of Far End C-bit Coding Violations reported via the far end block error count. |
| 1.3.6.1.2.1.10.30.11.1.6 | Columndsx3FarEndIntervalUASs | read-only | current | The counter associated with the number of Far End unavailable seconds. |
| 1.3.6.1.2.1.10.30.11.1.7 | Columndsx3FarEndIntervalValidData | read-only | current | This variable indicates if the data for this interval is valid. |
| 1.3.6.1.2.1.10.30.12 | Tabledsx3FarEndTotalTable | not-accessible | current | The DS3 Far End Total Table contains the cumulative sum of the various statistics for the 24 hour period preceding the current interval. |
| 1.3.6.1.2.1.10.30.12.1 | Rowdsx3FarEndTotalEntry | not-accessible | current | An entry in the DS3 Far End Total table. |
| 1.3.6.1.2.1.10.30.12.1.1 | Columndsx3FarEndTotalIndex | read-only | current | The index value which uniquely identifies the DS3 interface to which this entry is applicable. The interface identified by a particular value of this index is … |
| 1.3.6.1.2.1.10.30.12.1.2 | Columndsx3FarEndTotalCESs | read-only | current | The counter associated with the number of Far End C-bit Errored Seconds encountered by a DS3 interface in the previous 24 hour interval. Invalid 15 minute inte… |
| 1.3.6.1.2.1.10.30.12.1.3 | Columndsx3FarEndTotalCSESs | read-only | current | The counter associated with the number of Far End C-bit Severely Errored Seconds encountered by a DS3 interface in the previous 24 hour interval. Invalid 15 mi… |
| 1.3.6.1.2.1.10.30.12.1.4 | Columndsx3FarEndTotalCCVs | read-only | current | The counter associated with the number of Far End C-bit Coding Violations reported via the far end block error count encountered by a DS3 interface in the prev… |
| 1.3.6.1.2.1.10.30.12.1.5 | Columndsx3FarEndTotalUASs | read-only | current | The counter associated with the number of Far End unavailable seconds encountered by a DS3 interface in the previous 24 hour interval. Invalid 15 minute interv… |
| 1.3.6.1.2.1.10.30.13 | Tabledsx3FracTable | not-accessible | deprecated | This table is deprecated in favour of using ifStackTable. Implementation of this table was optional. It was designed for those systems dividing a DS3/E3 into c… |
| 1.3.6.1.2.1.10.30.13.1 | Rowdsx3FracEntry | not-accessible | deprecated | An entry in the DS3 Fractional table. |
| 1.3.6.1.2.1.10.30.13.1.1 | Columndsx3FracIndex | read-only | deprecated | The index value which uniquely identifies the DS3 interface to which this entry is applicable The interface identified by a particular value of this index is t… |
| 1.3.6.1.2.1.10.30.13.1.2 | Columndsx3FracNumber | read-only | deprecated | The channel number for this entry. |
| 1.3.6.1.2.1.10.30.13.1.3 | Columndsx3FracIfIndex | read-write | deprecated | An index value that uniquely identifies an interface. The interface identified by a particular value of this index is the same interface as identified by the s… |
| 1.3.6.1.2.1.10.30.14 | Nodeds3Conformance | |||
| 1.3.6.1.2.1.10.30.14.1 | Nodeds3Groups | |||
| 1.3.6.1.2.1.10.30.14.1.1 | Groupds3NearEndConfigGroup | current | A collection of objects providing configuration information applicable to all DS3/E3 interfaces. | |
| 1.3.6.1.2.1.10.30.14.1.2 | Groupds3NearEndStatisticsGroup | current | A collection of objects providing statistics information applicable to all DS3/E3 interfaces. | |
| 1.3.6.1.2.1.10.30.14.1.3 | Groupds3FarEndGroup | current | A collection of objects providing remote configuration and statistics information applicable to C-bit Parity and SYNTRAN DS3 interfaces. | |
| 1.3.6.1.2.1.10.30.14.1.4 | Groupds3DeprecatedGroup | deprecated | A collection of obsolete objects that may be implemented for backwards compatibility. | |
| 1.3.6.1.2.1.10.30.14.1.5 | Groupds3NearEndOptionalConfigGroup | current | A collection of objects that may be implemented on DS3/E3 interfaces. | |
| 1.3.6.1.2.1.10.30.14.1.6 | Groupds3NearEndOptionalTrapGroup | current | A collection of notifications that may be implemented on DS3/E3 interfaces. | |
| 1.3.6.1.2.1.10.30.14.2 | Nodeds3Compliances | |||
| 1.3.6.1.2.1.10.30.14.2.1 | Complianceds3Compliance | read-only | current | The compliance statement for DS3/E3 interfaces. |
| 1.3.6.1.2.1.10.30.15 | Nodeds3Traps | |||
| 1.3.6.1.2.1.10.30.15.0.1 | Notificationdsx3LineStatusChange | current | A dsx3LineStatusChange trap is sent when the value of an instance of dsx3LineStatus changes. It can be utilized by an NMS to trigger polls. When the line statu… |