DSG-IF-MIB
87 objects
This is the MIB Module for the DOCSIS Set-top Gateway (DSG). The DSG provides a one-way IP datagram transport for Out-Of-Band (OOB) messaging to cable set-top clients. The one-way IP datagram transport is called a DSG Tunnel. A DSG Tunnel carrying either a broadcast, unicast or multicast IP datagram stream originating at the DOCSIS Set-top Gateway and carrying Out-Of-Band messages intended for set-top clients. It is carried over one or more downstream DOCSIS channels. Multiple DSG tunnels may exist on a single downstream DOCSIS channel.
Imported Objects
| CLAB-DEF-MIB | clabProjDocsis |
| DOCS-IF3-MIB | Dsid |
| IF-MIB | ifIndex InterfaceIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressPrefixLength InetAddressType InetPortNumber |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | MacAddress RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4491.2.1.3 | IdentitydsgIfMIB | This is the MIB Module for the DOCSIS Set-top Gateway (DSG). The DSG provides a one-way IP datagram transport for Out-Of-Band (OOB) messaging to cable set-top … | ||
| 1.3.6.1.4.1.4491.2.1.3.0 | NodedsgIfMIBNotifications | |||
| 1.3.6.1.4.1.4491.2.1.3.1 | NodedsgIfMIBObjects | |||
| 1.3.6.1.4.1.4491.2.1.3.1.1 | NodedsgIfClassifier | |||
| 1.3.6.1.4.1.4491.2.1.3.1.1.1 | TabledsgIfClassifierTable | not-accessible | current | The Classifier Table contains attributes use to classify inbound packets into the tunnel and classifiers for the DSG clients, encoding in the DCD messages on t… |
| 1.3.6.1.4.1.4491.2.1.3.1.1.1.1 | RowdsgIfClassifierEntry | not-accessible | current | An entry in the Classifier Table. Rows are created by an SNMP SET request setting the value of dsgIfClassRowStatus to 'createAndGo'. Each entry is created for … |
| 1.3.6.1.4.1.4491.2.1.3.1.1.1.1.1 | ColumndsgIfClassId | not-accessible | current | The index that provides a unique classifier (in a DSG Agent). This value corresponds to the Classifier ID TLV in the DCD message. |
| 1.3.6.1.4.1.4491.2.1.3.1.1.1.1.2 | ColumndsgIfClassPriority | read-create | current | The priority of this classifier. Default value 0 indicates lowest priority. |
| 1.3.6.1.4.1.4491.2.1.3.1.1.1.1.3 | ColumndsgIfClassSrcIpAddrType | read-create | current | The type of internet address of dsgIfClassSrcIpAddress. |
| 1.3.6.1.4.1.4491.2.1.3.1.1.1.1.4 | ColumndsgIfClassSrcIpAddr | read-create | current | The source IP address to be matched for this classifier. A value 0 for this object indicates a match of any IP address. A value that contains non-zero bits out… |
| 1.3.6.1.4.1.4491.2.1.3.1.1.1.1.5 | ColumndsgIfClassSrcIpPrefixLength | read-create | current | The length of the CIDR Prefix carried in dsgIfClassSrcIpAddr. In IPv4 addresses, a length of 32 indicates a match of a single host address, and a length betwee… |
| 1.3.6.1.4.1.4491.2.1.3.1.1.1.1.6 | ColumndsgIfClassDestIpAddressType | read-create | current | The type of internet address of dsgIfClassDestIpAddress. |
| 1.3.6.1.4.1.4491.2.1.3.1.1.1.1.7 | ColumndsgIfClassDestIpAddress | read-create | current | The destination IP address to be matched for this classifier. |
| 1.3.6.1.4.1.4491.2.1.3.1.1.1.1.8 | ColumndsgIfClassDestPortStart | read-create | current | This is the inclusive lower bound of the transport-layer source port range that is to be matched. |
| 1.3.6.1.4.1.4491.2.1.3.1.1.1.1.9 | ColumndsgIfClassDestPortEnd | read-create | current | This is the inclusive higher bound of the transport-layer source port range that is to be matched. |
| 1.3.6.1.4.1.4491.2.1.3.1.1.1.1.10 | ColumndsgIfClassRowStatus | read-create | current | The status of the row. A value of active(1) indicates that this classifier is applied to this tunnel. A value of notInService(2) indicates that matching of the… |
| 1.3.6.1.4.1.4491.2.1.3.1.1.1.1.11 | ColumndsgIfClassIncludeInDCD | read-create | current | Indicates whether or not this DSG Classifier will be sent in DCD messages for use as a Layer-3 and Layer-4 packet filter by the DSG eCM. |
| 1.3.6.1.4.1.4491.2.1.3.1.2 | NodedsgIfTunnel | |||
| 1.3.6.1.4.1.4491.2.1.3.1.2.1 | TabledsgIfTunnelTable | not-accessible | current | The DSG Tunnel Table contains group(s) of tunnel(s). Each tunnel is associated to the destination MAC address. |
| 1.3.6.1.4.1.4491.2.1.3.1.2.1.1 | RowdsgIfTunnelEntry | not-accessible | current | An entry in the DSG Tunnel Table. Rows are created by an SNMP SET request setting the value of dsgIfTunnelRowStatus to 'createAndGo'. Each entry associated to … |
| 1.3.6.1.4.1.4491.2.1.3.1.2.1.1.1 | ColumndsgIfTunnelIndex | not-accessible | current | The index into the DSG Tunnel table that represent a tunnel. |
| 1.3.6.1.4.1.4491.2.1.3.1.2.1.1.2 | ColumndsgIfTunnelGroupIndex | read-create | current | This index represents a group of tunnels that could be associated to one or more downstream which mapped to dsgIfTunnelGrpIndex. |
| 1.3.6.1.4.1.4491.2.1.3.1.2.1.1.3 | ColumndsgIfTunnelClientIdListIndex | read-create | current | This index represents a group of client id(s) which mapped to dsgIfClientIdListIndex. |
| 1.3.6.1.4.1.4491.2.1.3.1.2.1.1.4 | ColumndsgIfTunnelMacAddress | read-create | current | The DSG tunnel destination MAC address. |
| 1.3.6.1.4.1.4491.2.1.3.1.2.1.1.5 | ColumndsgIfTunnelServiceClassName | read-create | current | The Service Class Name that associated to the docsQosServiceClassName(in DOCS-QOS-MIB). Creation of a Service Class MUST be configured through the docsQosServi… |
| 1.3.6.1.4.1.4491.2.1.3.1.2.1.1.6 | ColumndsgIfTunnelRowStatus | read-create | current | The status of the row. A value of notInService(2) indicates that this tunnel is disabled and no OOB traffic will be forwarded to DSG clients and this tunnel pa… |
| 1.3.6.1.4.1.4491.2.1.3.1.3 | NodedsgIfTunnelGrpToChannel | |||
| 1.3.6.1.4.1.4491.2.1.3.1.3.1 | TabledsgIfTunnelGrpToChannelTable | not-accessible | current | The DSG Tunnel Group to Channel Table associates a group of tunnels to one or more downstream channel. |
| 1.3.6.1.4.1.4491.2.1.3.1.3.1.1 | RowdsgIfTunnelGrpToChannelEntry | not-accessible | current | An entry in the DSG Tunnel Table. Rows are created by an SNMP SET request setting the value of dsgIfTunnelGrpRowStatus to 'createAndGo'. Rows are deleted by an… |
| 1.3.6.1.4.1.4491.2.1.3.1.3.1.1.1 | ColumndsgIfTunnelGrpIndex | not-accessible | current | The index into this table. |
| 1.3.6.1.4.1.4491.2.1.3.1.3.1.1.2 | ColumndsgIfTunnelGrpChannelIndex | not-accessible | current | The index into this table. |
| 1.3.6.1.4.1.4491.2.1.3.1.3.1.1.3 | ColumndsgIfTunnelGrpDsIfIndex | read-create | current | The downstream ifIndex that will be associated to this group of tunnel(s). |
| 1.3.6.1.4.1.4491.2.1.3.1.3.1.1.4 | ColumndsgIfTunnelGrpRulePriority | read-create | current | The DSG rule priority determines the order of which channel and its associated UCIDs should be applied by the DSG client. The default value is 0, which is the … |
| 1.3.6.1.4.1.4491.2.1.3.1.3.1.1.5 | ColumndsgIfTunnelGrpUcidList | read-create | current | The list of Upstream Channel ID (UCID) values (octets) for which the DSG rule applies. A DSG client matches this parameter if its UCID value is included in the… |
| 1.3.6.1.4.1.4491.2.1.3.1.3.1.1.6 | ColumndsgIfTunnelGrpVendorParamId | read-create | current | The index of vendor parameter, dsgIfVendorParamId in the dsgIfVendorParamTable describing the vendor specific DSG parameters. If no associated entry in dsgIfVe… |
| 1.3.6.1.4.1.4491.2.1.3.1.3.1.1.7 | ColumndsgIfTunnelGrpRowStatus | read-create | current | The status of this row. The value of notInService(2) indicates that this tunnel group is disabled and no OOB traffic on all the associated tunnel(s) will be fo… |
| 1.3.6.1.4.1.4491.2.1.3.1.4 | NodedsgIfDownstreamChannel | |||
| 1.3.6.1.4.1.4491.2.1.3.1.4.1 | TabledsgIfDownstreamTable | not-accessible | current | The DSG Downstream Table contains the associated timers, vendor specific parameters index and the channel list index to a specific downstream. |
| 1.3.6.1.4.1.4491.2.1.3.1.4.1.1 | RowdsgIfDownstreamEntry | not-accessible | current | An entry in the DSG Downstream Table. An entry in this table exists for each ifEntry with an ifType of docsCableDownstream(128). |
| 1.3.6.1.4.1.4491.2.1.3.1.4.1.1.1 | ColumndsgIfDownTimerIndex | read-write | current | The index into the timer table, dsgIfTimerTable providing the timers used by the DSG client(s). The default value 0 indicates there is no associated timers tha… |
| 1.3.6.1.4.1.4491.2.1.3.1.4.1.1.2 | ColumndsgIfDownVendorParamId | read-write | current | The index of vendor parameter, dsgIfVendorParamId in the dsgIfVendorParamTable describing the vendor specific DSG parameters. If no associated entry in dsgIfVe… |
| 1.3.6.1.4.1.4491.2.1.3.1.4.1.1.3 | ColumndsgIfDownChannelListIndex | read-write | current | The index of a the downstream frequency channel lists, dsgIfChannelListIndex in the dsgIfChannelListTable providing the list of downstream frequencies that con… |
| 1.3.6.1.4.1.4491.2.1.3.1.4.1.1.4 | ColumndsgIfDownEnableDCD | read-write | current | Used to enable or disable DCD messages to be sent on this downstream channel. The value is always true(1) for those downstreams that contains one or many DSG T… |
| 1.3.6.1.4.1.4491.2.1.3.1.5 | NodedsgIfDCD | |||
| 1.3.6.1.4.1.4491.2.1.3.1.5.1 | TabledsgIfClientIdTable | not-accessible | current | The Client Identification Table contains the client identification type and value. It also contains the vendor specific parameter identification. There could b… |
| 1.3.6.1.4.1.4491.2.1.3.1.5.1.1 | RowdsgIfClientIdEntry | not-accessible | current | An entry in the Client Id Table. Rows are created by an SNMP SET request setting the value of dsgIfClientRowStatus to 'createAndGo'. Rows are deleted by an SNM… |
| 1.3.6.1.4.1.4491.2.1.3.1.5.1.1.1 | ColumndsgIfClientIdListIndex | not-accessible | current | The index to this table. |
| 1.3.6.1.4.1.4491.2.1.3.1.5.1.1.2 | ColumndsgIfClientIdIndex | not-accessible | current | The index to each entry of the Client Id. |
| 1.3.6.1.4.1.4491.2.1.3.1.5.1.1.3 | ColumndsgIfClientIdType | read-create | current | The Client Identification type. A DSG client id of type broadcast(1) received by all DSG client(s). A DSG client id of type macAddress(2) is received by the DS… |
| 1.3.6.1.4.1.4491.2.1.3.1.5.1.1.4 | ColumndsgIfClientIdValue | read-create | current | The Client Identification Value. The content depends on the value of the dsgIfClientIdType. The dsgIfClientIdType of a type broadcast(1), the value is empty st… |
| 1.3.6.1.4.1.4491.2.1.3.1.5.1.1.5 | ColumndsgIfClientVendorParamId | read-create | current | The index of the vendor parameter id, dsgIfVendorParamId in the dsgIfVendorParamTable describing the vendor specific DSG parameters. If no associated entry in … |
| 1.3.6.1.4.1.4491.2.1.3.1.5.1.1.6 | ColumndsgIfClientRowStatus | read-create | current | The status of the row. |
| 1.3.6.1.4.1.4491.2.1.3.1.5.2 | TabledsgIfVendorParamTable | not-accessible | current | The DSG Vendor Parameter Table allows vendors to send specific parameters to the DSG clients within a DSG rule or within the DSG Configuration block in a DCD m… |
| 1.3.6.1.4.1.4491.2.1.3.1.5.2.1 | RowdsgIfVendorParamEntry | not-accessible | current | An entry in the DSG Vendor Parameter Table. Rows are created by an SNMP SET request setting the value of dsgIfVendorRowStatus to 'createAndGo'. Each entry repr… |
| 1.3.6.1.4.1.4491.2.1.3.1.5.2.1.1 | ColumndsgIfVendorParamId | not-accessible | current | The index of the table. |
| 1.3.6.1.4.1.4491.2.1.3.1.5.2.1.2 | ColumndsgIfVendorIndex | not-accessible | current | The Vendor Specific Index. |
| 1.3.6.1.4.1.4491.2.1.3.1.5.2.1.3 | ColumndsgIfVendorOUI | read-create | current | The Vendor assigned Organization Unique Id (OUI). |
| 1.3.6.1.4.1.4491.2.1.3.1.5.2.1.4 | ColumndsgIfVendorValue | read-create | current | The Vendor Specific Parameter Value. |
| 1.3.6.1.4.1.4491.2.1.3.1.5.2.1.5 | ColumndsgIfVendorRowStatus | read-create | current | The status of the row. |
| 1.3.6.1.4.1.4491.2.1.3.1.5.3 | TabledsgIfChannelListTable | not-accessible | current | The DSG Channel List Table contains list of one or multiple downstream frequencies that are carrying DSG tunnel(s). |
| 1.3.6.1.4.1.4491.2.1.3.1.5.3.1 | RowdsgIfChannelListEntry | not-accessible | current | An entry in the DSG Channel List Table. Rows are created by an SNMP SET request setting the value of dsgIfChannelRowStatus to 'createAndGo'. Rows are deleted b… |
| 1.3.6.1.4.1.4491.2.1.3.1.5.3.1.1 | ColumndsgIfChannelListIndex | not-accessible | current | The index to this table. |
| 1.3.6.1.4.1.4491.2.1.3.1.5.3.1.2 | ColumndsgIfChannelIndex | not-accessible | current | The index for each downstream frequency that contains the DSG tunnel(s). |
| 1.3.6.1.4.1.4491.2.1.3.1.5.3.1.3 | ColumndsgIfChannelDsFreq | read-create | current | The DOCSIS downstream center frequency. The receive frequency MUST be a multiple of 62500Hz. |
| 1.3.6.1.4.1.4491.2.1.3.1.5.3.1.4 | ColumndsgIfChannelRowStatus | read-create | current | The status of the row. |
| 1.3.6.1.4.1.4491.2.1.3.1.5.4 | TabledsgIfTimerTable | not-accessible | current | The DSG Timer Table contains timers that are sent to the DSG client(s) via the DCD message. |
| 1.3.6.1.4.1.4491.2.1.3.1.5.4.1 | RowdsgIfTimerEntry | not-accessible | current | An entry in the DSG Timer Table. Rows are created by an SNMP SET request setting the value of dsgIfTimerRowStatus to 'createAndGo'. Rows are deleted by an SNMP… |
| 1.3.6.1.4.1.4491.2.1.3.1.5.4.1.1 | ColumndsgIfTimerIndex | not-accessible | current | The index to this table. |
| 1.3.6.1.4.1.4491.2.1.3.1.5.4.1.2 | ColumndsgIfTimerTdsg1 | read-create | current | Initialization Timeout. This is the timeout period for the DSG packets during initialization of the DSG client. The default value is 2 seconds. |
| 1.3.6.1.4.1.4491.2.1.3.1.5.4.1.3 | ColumndsgIfTimerTdsg2 | read-create | current | Operational Timeout. This is the timeout period for the DSG packets during normal operation of the DSG client. Default value is 10 minutes. |
| 1.3.6.1.4.1.4491.2.1.3.1.5.4.1.4 | ColumndsgIfTimerTdsg3 | read-create | current | Two-way retry timer. This is the retry timer that determines when the DSG client attempts to reconnect with the DSG Agent and established two-way connectivity.… |
| 1.3.6.1.4.1.4491.2.1.3.1.5.4.1.5 | ColumndsgIfTimerTdsg4 | read-create | current | One-way retry timer. The retry timer that determines when the client attempts to rescan for a DOCSIS downstream channel that contains DSG packets after a dsgIf… |
| 1.3.6.1.4.1.4491.2.1.3.1.5.4.1.6 | ColumndsgIfTimerRowStatus | read-create | current | The status of the row. |
| 1.3.6.1.4.1.4491.2.1.3.1.6 | NodedsgIfTunnelDsStats | |||
| 1.3.6.1.4.1.4491.2.1.3.1.6.1 | TabledsgIfTunnelDsStatsTable | not-accessible | current | The IF Tunnel Downstream Stats Table contains the packet and byte counters for the tunnel. It also contains the DSID used by the tunnel traffic. |
| 1.3.6.1.4.1.4491.2.1.3.1.6.1.1 | RowdsgIfTunnelDsStatsEntry | not-accessible | current | An entry in the DSG IF Tunnel Downstream Stats Table. An entry in this table exists for each dsgIfTunnelIndex and an ifIndex of docsCableDownstream(128). |
| 1.3.6.1.4.1.4491.2.1.3.1.6.1.1.1 | ColumndsgIfTunnelDsStatsPkts | read-only | current | This attribute indicates the count of the number of packets transmitted in this tunnel |
| 1.3.6.1.4.1.4491.2.1.3.1.6.1.1.2 | ColumndsgIfTunnelDsStatsOctets | read-only | current | This attribute indicates the count of the number of octets transmitted in this tunnel |
| 1.3.6.1.4.1.4491.2.1.3.1.6.1.1.3 | ColumndsgIfTunnelDsStatsDsid | read-only | current | When operating with Multicast DSID Forwarding (MDF) enabled, this object contains the DSID value with which the CMTS labels the DSG Tunnel traffic. If no DSID … |
| 1.3.6.1.4.1.4491.2.1.3.2 | NodedsgIfMIBConformance | |||
| 1.3.6.1.4.1.4491.2.1.3.4 | NodedsgIfConformance | |||
| 1.3.6.1.4.1.4491.2.1.3.4.1 | NodedsgIfGroups | |||
| 1.3.6.1.4.1.4491.2.1.3.4.1.1 | GroupdsgIfClassifierGroup | current | A collection of objects providing the classifier configuration. | |
| 1.3.6.1.4.1.4491.2.1.3.4.1.2 | GroupdsgIfBaseGroup | current | A collection of objects providing DSG Tunnel and Channel configuration. | |
| 1.3.6.1.4.1.4491.2.1.3.4.1.3 | GroupdsgIfDCDGroup | current | A collection of objects providing Timers configuration. | |
| 1.3.6.1.4.1.4491.2.1.3.4.2 | NodedsgIfCompliances | |||
| 1.3.6.1.4.1.4491.2.1.3.4.2.1 | CompliancedsgIfBasicCompliance | current | The compliance statement for DOCSIS Set-top Gateway systems. |