DSR4410MD-MIB
210 objects
The managed objects for the dsr mib.
Imported Objects
| SNMPv2-SMI | IpAddress MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3 | Nodeorg | |||
| 1.3.6 | Nodedod | |||
| 1.3.6.1 | Nodeinternet | |||
| 1.3.6.1.4 | Nodeprivate | |||
| 1.3.6.1.4.1 | Nodeenterprises | |||
| 1.3.6.1.4.1.1166 | NodegiMIB | |||
| 1.3.6.1.4.1.1166.1 | Nodegiproducts | |||
| 1.3.6.1.4.1.1166.1.621 | Identitydsr | The managed objects for the dsr mib. | ||
| 1.3.6.1.4.1.1166.1.621.1 | NodevideoMib | |||
| 1.3.6.1.4.1.1166.1.621.1.1 | ScalarvideoOutput525Lines | read-write | current | The format of the output video that the unit renders when the unit is tuned to a 525 line video broadcast signal. |
| 1.3.6.1.4.1.1166.1.621.1.2 | ScalarvideoOutput625Lines | read-write | current | The format of the output video that the unit renders when the unit is tuned to a 625 line video broadcast signal. |
| 1.3.6.1.4.1.1166.1.621.1.3 | ScalaraspectRatioInput | read-only | current | The aspect ratio of the video that is carried in the broadcast signal. |
| 1.3.6.1.4.1.1166.1.621.1.4 | ScalaraspectRatioOutput | read-write | current | The aspect ratio of the output video signal. |
| 1.3.6.1.4.1.1166.1.621.2 | NoderfPortsMib | |||
| 1.3.6.1.4.1.1166.1.621.2.1 | NoderfPortsSetup | |||
| 1.3.6.1.4.1.1166.1.621.2.1.1 | Nodeport1 | |||
| 1.3.6.1.4.1.1166.1.621.2.1.1.1 | Scalarport1SetupMode | read-write | current | When the setup mode is set to manual the satellite name and polarity has to befined by the user. When the port mode is set to auto the Satellite name and polar… |
| 1.3.6.1.4.1.1166.1.621.2.1.1.2 | Scalarport1Satellite | read-write | current | A 2 to 3 character abbreviation of the name of the satellite to which the RF port is associated. |
| 1.3.6.1.4.1.1166.1.621.2.1.1.3 | Scalarport1Polarity | read-write | current | The polarity of the RF input applied to the RF port. The undefined value is not writeable; instead, undefined can only be set by the uplink. |
| 1.3.6.1.4.1.1166.1.621.2.1.2 | Nodeport2 | |||
| 1.3.6.1.4.1.1166.1.621.2.1.2.1 | Scalarport2SetupMode | read-write | current | When the setup mode is set to manual the satellite name and polarity has to befined by the user. When the port mode is set to auto the Satellite name and polar… |
| 1.3.6.1.4.1.1166.1.621.2.1.2.2 | Scalarport2Satellite | read-write | current | A 2 to 3 character abbreviation of the name of the satellite to which the RF port is associated. |
| 1.3.6.1.4.1.1166.1.621.2.1.2.3 | Scalarport2Polarity | read-write | current | The polarity of the RF input applied to the RF port. The undefined value is not writeable; instead, undefined can only be set by the uplink. |
| 1.3.6.1.4.1.1166.1.621.2.2 | NodemanualTune | |||
| 1.3.6.1.4.1.1166.1.621.2.2.1 | ScalaractivePort | read-write | current | The RF port that is active during a manual tune. |
| 1.3.6.1.4.1.1166.1.621.2.2.2 | Scalarmode | read-write | current | The frequency plan of the satellite to which the unit tunes during installation. The unit accepts a C-Band satellite transponder number when the selection is x… |
| 1.3.6.1.4.1.1166.1.621.2.2.3 | ScalartransponderNumber | read-write | current | The transponder number to which the unit tunes during installation This in turn specifies the L-Band frequency to which the unit tunes during installation. Thi… |
| 1.3.6.1.4.1.1166.1.621.2.2.4 | Scalarfrequency | read-write | current | The L-band frequency, in MHz, during a manual tune. A new manual tune is initiated when this object is set.This value is valid only of the Frequency Plan selec… |
| 1.3.6.1.4.1.1166.1.621.2.2.5 | ScalardvbSymbolRate | read-write | current | The symbol-rate to be tuned to in units of sps. A new manual tune is initiated when this object is set. Value -1 indicates its Not applicable. |
| 1.3.6.1.4.1.1166.1.621.2.2.6 | ScalardvbCodeRate | read-write | current | The code rate of the channel being tuned to. A new manual tune is initiated when this object is set. Value -1 indicates its Not applicable. |
| 1.3.6.1.4.1.1166.1.621.2.2.8 | ScalarsymbolCodeBit | read-write | current | The symbol, code rate, and bitstream select combination during a manual tune. A new manual tune is initiated when this object is set. The symbol rate takes eig… |
| 1.3.6.1.4.1.1166.1.621.2.2.9 | ScalarmodulationMode | read-write | current | The modulation mode to be used for the manual tune. A new manual tune is initiated when this object is set. |
| 1.3.6.1.4.1.1166.1.621.2.2.10 | Scalarpsk8SymbolRate | read-write | current | The symbol-rate to be tuned to in units of sps. A new manual tune is initiated when this object is set. Value -1 indicates its Not applicable. |
| 1.3.6.1.4.1.1166.1.621.2.2.11 | Scalarpsk8CodeRate | read-write | current | The code rate of the channel being tuned to. A new manual tune is initiated when this object is set. Value -1 indicates its Not applicable. |
| 1.3.6.1.4.1.1166.1.621.2.2.12 | ScalardvbS2symbolRate | read-write | current | The symbol-rate to be tuned to in units of sps. A new manual tune is initiated when this object is set. Value -1 indicates its Not applicable. |
| 1.3.6.1.4.1.1166.1.621.2.2.13 | ScalardvbS2codeRate | read-write | current | The code rate of the channel being tuned to. A new manual tune is initiated when this object is set. Value -1 indicates its Not applicable. |
| 1.3.6.1.4.1.1166.1.621.3 | NodechannelMib | |||
| 1.3.6.1.4.1.1166.1.621.3.1 | NodechannelSelect | |||
| 1.3.6.1.4.1.1166.1.621.3.1.1 | ScalarvctID | read-write | current | The virtual channel table number. |
| 1.3.6.1.4.1.1166.1.621.3.1.2 | ScalarchannelNumber | read-write | current | The virtual channel. |
| 1.3.6.1.4.1.1166.1.621.3.2 | NodechannelStatus | |||
| 1.3.6.1.4.1.1166.1.621.3.2.1 | Scalartransponder | read-only | current | The current transponder name (alpha/numeric) as received from the uplink.A Blank string is returned if the name is not available . |
| 1.3.6.1.4.1.1166.1.621.3.2.2 | Scalarsource | read-only | current | The name of the current source signal as received from the uplink.A Blank string is returned if the name is not available . |
| 1.3.6.1.4.1.1166.1.621.3.2.3 | ScalarsatelliteStatus | read-only | current | The name of the current satellite as received from the uplink. A Blank string is returned if the name is not available . |
| 1.3.6.1.4.1.1166.1.621.4 | NodeserviceSelectionMib | |||
| 1.3.6.1.4.1.1166.1.621.4.1 | ScalarmpegServiceNumber | read-write | current | The MPEG service number which the IRD has to play. |
| 1.3.6.1.4.1.1166.1.621.5 | NodeunitControlMib | |||
| 1.3.6.1.4.1.1166.1.621.5.1 | NodeunitControl | |||
| 1.3.6.1.4.1.1166.1.621.5.1.1 | Scalarcontrast | read-write | current | The LCD contrast, with 0 representing the least contrast and 30 representing the most. |
| 1.3.6.1.4.1.1166.1.621.5.1.3 | ScalarasiEnable | read-write | current | Option to enable or disbale the ASI output. Note that lock-off is a read only value used by the uplink to lock asiEnable. It cannot be set via SNMP. Also, when… |
| 1.3.6.1.4.1.1166.1.621.5.1.6 | ScalarlnbPower | read-write | current | Option to enable or disable LNB Power. |
| 1.3.6.1.4.1.1166.1.621.5.1.7 | ScalarresetIRD | read-write | current | Option to reboot the box. |
| 1.3.6.1.4.1.1166.1.621.5.1.8 | ScalarformatRate | read-write | current | Format and rate of the ASI output |
| 1.3.6.1.4.1.1166.1.621.6 | NodeaudioMib | |||
| 1.3.6.1.4.1.1166.1.621.6.1 | NodeaudioConfig | |||
| 1.3.6.1.4.1.1166.1.621.6.1.1 | Nodeaudio1Config | |||
| 1.3.6.1.4.1.1166.1.621.6.1.1.1 | Scalaraudio1GainControl | read-only | current | In audio gain control joint, only the left audio channel is edited. The right audio channel gain will be set to the left. |
| 1.3.6.1.4.1.1166.1.621.6.1.1.2 | Scalaraudio1LeftGain | read-write | current | The left audio signal output level from -20 dB to 0 dB, in 1 dB increments. |
| 1.3.6.1.4.1.1166.1.621.6.1.1.3 | Scalaraudio1RightGain | read-only | current | The right audio signal output level from -20 dB to 0 dB, in 1 dB increments. |
| 1.3.6.1.4.1.1166.1.621.6.1.1.4 | Scalaraudio1DiagNorm | read-write | current | This varaiables enables and diables the audio dialog normalization |
| 1.3.6.1.4.1.1166.1.621.6.1.1.5 | Scalaraudio1DownMix | read-write | current | The mode of the audio output. The unit downmixes the input audio to the selected channel mode. |
| 1.3.6.1.4.1.1166.1.621.6.1.1.6 | Scalaraudio1Compression | read-write | current | The degree of audio level compression. |
| 1.3.6.1.4.1.1166.1.621.6.1.2 | Nodeaudio2Config | |||
| 1.3.6.1.4.1.1166.1.621.6.1.2.1 | Scalaraudio2GainControl | read-only | current | In audio gain control joint, only the left audio channel is edited. The right audio channel gain will be set to the left. |
| 1.3.6.1.4.1.1166.1.621.6.1.2.2 | Scalaraudio2LeftGain | read-write | current | The left audio signal output level from -20 dB to 0 dB, in 1 dB increments. |
| 1.3.6.1.4.1.1166.1.621.6.1.2.3 | Scalaraudio2RightGain | read-only | current | The right audio signal output level from -20 dB to 0 dB, in 1 dB increments. |
| 1.3.6.1.4.1.1166.1.621.6.1.2.4 | Scalaraudio2DiagNorm | read-write | current | This varaiables enables and diables the audio dialog normalization |
| 1.3.6.1.4.1.1166.1.621.6.1.2.5 | Scalaraudio2DownMix | read-write | current | The mode of the audio output. The unit downmixes the input audio to the selected channel mode . |
| 1.3.6.1.4.1.1166.1.621.6.1.2.6 | Scalaraudio2Compression | read-write | current | The degree of audio level compression. |
| 1.3.6.1.4.1.1166.1.621.6.2 | NodeaudioOutput | |||
| 1.3.6.1.4.1.1166.1.621.6.2.1 | Nodeaudio1Output | |||
| 1.3.6.1.4.1.1166.1.621.6.2.1.1 | Scalaraudio1LeftLanguage | read-write | current | The language for the audio1 . This 5-character language string is formatted as three letters followed by two numbers. The 2-digit number represents the order o… |
| 1.3.6.1.4.1.1166.1.621.6.2.1.2 | Scalaraudio1RightLanguage | read-write | current | The language for the right audio channel when the AudioDownMix selection is dualMono. When the AudioDownMix is not dualMono the value mirrors the audio1LeftLan… |
| 1.3.6.1.4.1.1166.1.621.6.2.1.3 | Scalaraudio1LeftLanguageStatus | read-only | current | The language of the left audio channel being presented by the IRD. This is a 3(def) or 5(e.g., eng01) character string of the similar format as of the audio1Le… |
| 1.3.6.1.4.1.1166.1.621.6.2.1.4 | Scalaraudio1RightLanguageStatus | read-only | current | The language of the right audio channel being presented by the IRD. This is a 3(def) or 5(e.g., eng01) character string of the similar format as of the audio1L… |
| 1.3.6.1.4.1.1166.1.621.6.2.2 | Nodeaudio2Output | |||
| 1.3.6.1.4.1.1166.1.621.6.2.2.1 | Scalaraudio2LeftLanguage | read-write | current | The language for the audio1 . This 5-character language string is formatted as three letters followed by two numbers. The 2-digit number represents the order o… |
| 1.3.6.1.4.1.1166.1.621.6.2.2.2 | Scalaraudio2RightLanguage | read-write | current | The language for the right audio channel when the AudioDownMix selection is dualMono. When the AudioDownMix is not dualMono the value mirrors the audio2LeftLan… |
| 1.3.6.1.4.1.1166.1.621.6.2.2.3 | Scalaraudio2LeftLanguageStatus | read-only | current | The language of the left audio channel being presented by the IRD. This is a 3(def) or 5(e.g., eng01) character string of the similar format as of the audio2Le… |
| 1.3.6.1.4.1.1166.1.621.6.2.2.4 | Scalaraudio2RightLanguageStatus | read-only | current | The language of the right audio channel being presented by the IRD. This is a 3(def) or 5(e.g., eng01) character string of the similar format as of the audio2L… |
| 1.3.6.1.4.1.1166.1.621.7 | NodedataMib | |||
| 1.3.6.1.4.1.1166.1.621.7.1 | NodedataStatus | |||
| 1.3.6.1.4.1.1166.1.621.7.1.1 | ScalarethernetIP | read-only | current | Retrieves whether the select channel contains IP data, as defined in the downloaded network data from the uplink. |
| 1.3.6.1.4.1.1166.1.621.7.2 | NodetextSetup | |||
| 1.3.6.1.4.1.1166.1.621.7.2.1 | ScalarsubtitleLanguage | read-write | current | The selected subtitle track. Applicable when the selected channel carries multiple subtitle tracks. The 5-character string has the following representation: ss… |
| 1.3.6.1.4.1.1166.1.621.7.2.2 | ScalarsubtitleLanguageStatus | read-only | current | The subtitle language currently being presented by the IRD |
| 1.3.6.1.4.1.1166.1.621.7.2.3 | ScalarsubtitleDisplay | read-write | current | The subtitle language currently being presented by the IRD |
| 1.3.6.1.4.1.1166.1.621.7.3 | Nodeethernet10-100 | |||
| 1.3.6.1.4.1.1166.1.621.7.3.1 | ScalaripAddress | read-only | current | The IP address of the snmp port 1, in the common dotted-decimal format. |
| 1.3.6.1.4.1.1166.1.621.7.3.2 | ScalarsubnetMask | read-only | current | The subnet mask of the snmp port 1, in the dotted-decimal format. |
| 1.3.6.1.4.1.1166.1.621.7.3.3 | ScalardefaultGateway | read-only | current | The IP address of the gateway that is used by the snmp port 1, in the dotted-decimal format. |
| 1.3.6.1.4.1.1166.1.621.7.3.4 | ScalarmacAddr | read-only | current | The ethernet 1 MAC address in hh:hh:hh:hh:hh:hh format. |
| 1.3.6.1.4.1.1166.1.621.7.4 | NodeethernetGigE | |||
| 1.3.6.1.4.1.1166.1.621.7.4.1 | ScalargigEipAddress | read-write | current | The IP address of the gigE port, in the common dotted-decimal format. |
| 1.3.6.1.4.1.1166.1.621.7.4.2 | ScalargigEsubnetMask | read-write | current | The subnet mask of the gigE port, in the dotted-decimal format. |
| 1.3.6.1.4.1.1166.1.621.7.4.3 | ScalargigEgateway | read-write | current | The IP address of the gateway that is used by the gigE port, in the dotted-decimal format. |
| 1.3.6.1.4.1.1166.1.621.7.4.4 | ScalargigEmacAddr | read-only | current | The gigEthernet MAC address in hh:hh:hh:hh:hh:hh format. |
| 1.3.6.1.4.1.1166.1.621.7.4.5 | ScalargigEmode | read-write | current | The gigEthernet mode is one of the following values MPTS,disabled,TS-DSMCC or DSM-CC. |
| 1.3.6.1.4.1.1166.1.621.7.4.6 | ScalarmptsIpAddr | read-write | current | The MPTS IP address of the gigE port in the dotted-decimal format. |
| 1.3.6.1.4.1.1166.1.621.7.4.7 | ScalarmptsPort | read-write | current | The port associated with the MPTS IP address. |
| 1.3.6.1.4.1.1166.1.621.8 | NodeextHardwareMib | |||
| 1.3.6.1.4.1.1166.1.621.8.1 | Nodealarms | |||
| 1.3.6.1.4.1.1166.1.621.8.1.2 | ScalaralarmTrigger | read-write | current | The trigger condition for which the alarm is activated. When the alarm is activated the Alarm LED illuminates and the alrm relay indicates an alarm condition. … |
| 1.3.6.1.4.1.1166.1.621.8.1.3 | ScalaralarmTest | read-write | current | A manual test of the alarm indicators. Setting ON places the unit in the alarm condition. |
| 1.3.6.1.4.1.1166.1.621.9 | NodestatusMib | |||
| 1.3.6.1.4.1.1166.1.621.9.1 | NodeaccessControl | |||
| 1.3.6.1.4.1.1166.1.621.9.1.1 | ScalarunitAddress | read-only | current | The unit's electronic address in the following format: ddd-ddddd-ddddd-ddd where d = decimal digit. |
| 1.3.6.1.4.1.1166.1.621.9.1.2 | ScalartvPasscard | read-only | current | The electronic address of the TV Pass Card, if present, in the unit address format. When no TV Pass Card is present the value returned is 'Not inserted'. |
| 1.3.6.1.4.1.1166.1.621.9.2 | Nodefirmware | |||
| 1.3.6.1.4.1.1166.1.621.9.2.1 | ScalarbootVersion | read-only | current | The version of the boot code. |
| 1.3.6.1.4.1.1166.1.621.9.2.2 | ScalarfpgaVersion | read-only | current | The version of the fpga. |
| 1.3.6.1.4.1.1166.1.621.9.2.3 | ScalarfirmwareVersion | read-only | current | The version of firmware code. |
| 1.3.6.1.4.1.1166.1.621.9.2.4 | ScalarupgradeFirmwareVersion | read-only | current | The upgrade version of firmware code. |
| 1.3.6.1.4.1.1166.1.621.10 | NodediagnosticMib | |||
| 1.3.6.1.4.1.1166.1.621.10.1 | NodescreenDisplay | |||
| 1.3.6.1.4.1.1166.1.621.10.1.1 | ScalardiagnosticScreen | read-write | current | The diagnostic screen that is to be presented by the unit on the video output. |
| 1.3.6.1.4.1.1166.1.621.10.1.2 | ScalarclearCounters | read-write | current | Clears the counters in the on-screen diagnostics to zero. |
| 1.3.6.1.4.1.1166.1.621.10.2 | NodetestSignals | |||
| 1.3.6.1.4.1.1166.1.621.10.2.1 | ScalarvideoTestPattern | read-write | current | The full-field video test pattern that is presented by the unit on the video output. |
| 1.3.6.1.4.1.1166.1.621.10.2.2 | Scalaraudio1TestPattern | read-write | current | The audio test signal that is outputted by the unit for audio 1. The following options are available: o 1000 Hz @ +16 dBm (for mono) o 4040, 3960 Hz @ + 4dBm e… |
| 1.3.6.1.4.1.1166.1.621.10.2.3 | Scalaraudio2TestPattern | read-write | current | See the DESCRIPTION for the audio1TestPattern object. |
| 1.3.6.1.4.1.1166.1.621.10.2.4 | ScalarcueToneSignal | read-write | current | The cue tone test signal.The unit generates a cue test tone sequence consisting of 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, *, #, A, B, C, D. The unit repeats the cue tes… |
| 1.3.6.1.4.1.1166.1.621.10.3 | Nodevits | |||
| 1.3.6.1.4.1.1166.1.621.10.3.1 | Scalarwaveform | read-write | current | The VITS test pattern that is presented by the unit on the the video output. |
| 1.3.6.1.4.1.1166.1.621.10.3.2 | Scalarfield | read-write | current | The field on which the VITS test pattern is presented by the unit on the video output. 'n/a' is a read-only value that the unit returns when the waveform objec… |
| 1.3.6.1.4.1.1166.1.621.10.3.3 | Scalarline | read-write | current | The line into which the VITS test pattern is presented by the unit on the video output. 'n/a' is a read-only value that the unit returns when the waveform obje… |
| 1.3.6.1.4.1.1166.1.621.11 | NodesignalStatus | |||
| 1.3.6.1.4.1.1166.1.621.11.1 | ScalaracquisitionState | read-only | current | The acquisition state for the active signal |
| 1.3.6.1.4.1.1166.1.621.11.2 | ScalarauthorizationState | read-only | current | The authorization state for viewing the current signal. This object mirrors the 'Auth State' field in the Fast Facts 1 OSD. |
| 1.3.6.1.4.1.1166.1.621.11.3 | ScalarencryptionMode | read-only | current | The encryption mode of the current signal. This object mirrors the 'Encryption' field in the Fast Facts 1 OSD. |
| 1.3.6.1.4.1.1166.1.621.11.4 | ScalarunitAddr | read-only | current | The unit's electronic address in the following format: ddd-ddddd-ddddd-ddd where d = decimal digit. This object mirrors the 'Unit' field in the Fast Facts 1 OS… |
| 1.3.6.1.4.1.1166.1.621.11.5 | ScalarvctIDFast | read-only | current | The current virtual channel table number. This object mirrors the 'VCT ID' field in the Fast Facts 1 OSD. |
| 1.3.6.1.4.1.1166.1.621.11.6 | ScalarchannelNum | read-only | current | The virtual channel number of the current signal. This object mirrors the 'VC #' field in the Fast Facts 1 OSD. |
| 1.3.6.1.4.1.1166.1.621.11.7 | ScalarserviceNumber | read-only | current | The MPEG-2 service number, as indicated in the virtual channel map, for the current signal. This object mirrors the 'Service #' field in the Fast Facts 1 OSD. |
| 1.3.6.1.4.1.1166.1.621.11.8 | ScalarsignalQuality | read-only | current | The RF quality level of the current signal. This object mirrors the 'Signal Quality' field in the Fast Facts 1 OSD. |
| 1.3.6.1.4.1.1166.1.621.11.9 | ScalarsignalPower | read-only | current | The RF power level of the current signal, and measured in units of 0.1 dBm. For example, '-650' represents -65.0 dBm. |
| 1.3.6.1.4.1.1166.1.621.11.10 | ScalarebNo | read-only | current | The signal to noise ration, Eb/No, of the current signal, and measured in units of 0.1 dB. For example, '-20' represents -2.0 dB '150' represents +15.0 dB This… |
| 1.3.6.1.4.1.1166.1.621.11.11 | ScalarsymbolRate | read-only | current | The symbol rate of the current signal. This object mirrors the 'Symbol Rate' field in the Fast Facts 1 OSD. |
| 1.3.6.1.4.1.1166.1.621.11.12 | ScalarfecRate | read-only | current | The FEC rate of the current signal. This object mirrors the 'FEC Rate' field in the Fast Facts 1 OSD. |
| 1.3.6.1.4.1.1166.1.621.11.13 | Scalarfreq | read-only | current | The frequency of the L-band signal, in kHz, that is applied to the antenna connector on the unit's back panel. This object mirrors the 'Frequency' field in the… |
| 1.3.6.1.4.1.1166.1.621.11.14 | ScalarsatelliteName | read-only | current | A 2 to 4 character satellite reference name, as indicated in the virtual channel map, for the current signal. This object mirrors the 'Sat' field in the Fast F… |
| 1.3.6.1.4.1.1166.1.621.11.15 | ScalarxpndrNumber | read-only | current | The transponder number of the satellite, as indicated in the virtual channel map, for the current signal. A value of zero indicates the first transponder, and … |
| 1.3.6.1.4.1.1166.1.621.11.16 | Scalarpolarization | read-only | current | The polarization, as indicated in the virtual channel map, for the current signal. This object mirrors the 'Polarization' field in the Fast Facts 1 OSD. |
| 1.3.6.1.4.1.1166.1.621.11.17 | ScalarmuxStatus | read-only | current | The multiplex format of the active L-Band signal |
| 1.3.6.1.4.1.1166.1.621.12 | NodeledStatus | |||
| 1.3.6.1.4.1.1166.1.621.12.1 | ScalarsignalLED | read-only | current | The Signal LED is on (illuminated) when the unit recognizes the signal as a DigiCipher II signal. This object mirrors the LED on the front panel |
| 1.3.6.1.4.1.1166.1.621.12.2 | ScalarauthorizedLED | read-only | current | The Authorized LED is on (illuminated) when the Signal LED is on and either (1) the programmer has transmitted the access messages to allow the unit to decrypt… |
| 1.3.6.1.4.1.1166.1.621.12.3 | ScalaralarmConditionLED | read-only | current | The Alarm condition LED is on (illuminated) when the IRD is in alarm state |
| 1.3.6.1.4.1.1166.1.621.12.8 | ScalardownloadLED | read-only | current | The Download LED is on ( illuminated ) when an active download is in progress |
| 1.3.6.1.4.1.1166.1.621.13 | NoderetuneMonitorMIB | |||
| 1.3.6.1.4.1.1166.1.621.13.1 | ScalarretuneMonitorEnable | read-write | current | Enables retune monitoring by the IRD. When read, this leaf provides the actual enable/disable status of the retune monitoring function in the IRD, and not just… |
| 1.3.6.1.4.1.1166.1.621.13.2 | ScalarretuneMsgStatistic | read-only | current | The total number of new retune messages. This counter is incremented whenever the IRD detects a new retune message, but is not incremented by each instance (du… |
| 1.3.6.1.4.1.1166.1.621.13.3 | ScalarretuneMsgVirtNetworkIDindex | read-write | current | A table of retune messages is indexed by this target virtual network ID. This table does not have entries for each instance (duplicate) of a retune message tha… |
| 1.3.6.1.4.1.1166.1.621.13.4 | ScalarretuneMsgVCTid | read-only | current | The target virtual channel map ID of the most recent active retune message. Range = 0 - 0xFFFF. |
| 1.3.6.1.4.1.1166.1.621.13.5 | ScalarretuneMsgVirtChannel | read-only | current | The target virtual channel of the most recent active retune message. Range = 0 - 4095. |
| 1.3.6.1.4.1.1166.1.621.13.6 | ScalarretuneMsgActivationTime | read-only | current | The activation time of the most recent active retune message. The activation time is a 32-bit count of GPS seconds since January 6, 1980, representing the time… |
| 1.3.6.1.4.1.1166.1.621.13.7 | ScalarretuneMsgCRC | read-only | current | The 4-byte CRC value of the most recent active retune message. |
| 1.3.6.1.4.1.1166.1.621.13.8 | ScalarretuneMsgCnt | read-only | current | The total number of instances that the IRD has received for the most recent active retune message. Range = 0 - 0xFFFF. Note: this counter is incremented when a… |
| 1.3.6.1.4.1.1166.1.621.14 | NodeidentificationGroup | |||
| 1.3.6.1.4.1.1166.1.621.14.1 | ScalaridentMIBVersion | read-only | current | The version number of this MIB. |
| 1.3.6.1.4.1.1166.1.621.14.2 | ScalaridentUnitModel | read-only | current | The unit model of this IRD. |
| 1.3.6.1.4.1.1166.1.621.15 | NodeacpMib | |||
| 1.3.6.1.4.1.1166.1.621.15.1 | ScalaracpMode | read-write | current | Setup mode for the authorization control processor. |
| 1.3.6.1.4.1.1166.1.621.15.2 | ScalaracpIndex | read-write | current | Number uniquely identifying the ACP and keystream pair. |
| 1.3.6.1.4.1.1166.1.621.15.3 | ScalaracpProgram | read-write | current | The MPEG service number of the program. |
| 1.3.6.1.4.1.1166.1.621.15.4 | ScalaracpUnitAddress | read-only | current | The electronic address of the selected ACP in the following format: ddd-ddddd-ddddd where d = decimal digit. |
| 1.3.6.1.4.1.1166.1.621.15.5 | ScalaracpKeyStream | read-only | current | The selected keystream. |
| 1.3.6.1.4.1.1166.1.621.15.6 | ScalaracpAuthState | read-only | current | This field displays the authorization status of the ACP for the current Service association. AU NA The unit presents dashes when no information is available |
| 1.3.6.1.4.1.1166.1.621.15.7 | ScalaracpEncryptMode | read-only | current | This field displays the Encryption Mode of the service being decrypted by the selected ACP. The different values are FP - Fixed Program Key FW - Fixed Working … |
| 1.3.6.1.4.1.1166.1.621.16 | NodetestMib | |||
| 1.3.6.1.4.1.1166.1.621.16.1 | Nodeaudio | |||
| 1.3.6.1.4.1.1166.1.621.16.1.1 | ScalarprimaryAudioLock | read-only | current | Gives Primary Audio is locked or not |
| 1.3.6.1.4.1.1166.1.621.16.1.2 | ScalarsecondaryAudioLock | read-only | current | Gives Secondary Audio is locked or not |
| 1.3.6.1.4.1.1166.1.621.16.1.4 | ScalarprimaryAudioPID | read-only | current | Gives Primary Audio PID |
| 1.3.6.1.4.1.1166.1.621.16.1.5 | ScalarsecondaryAudioPID | read-only | current | Gives Secondary Audio PID |
| 1.3.6.1.4.1.1166.1.621.16.2 | Nodevideo | |||
| 1.3.6.1.4.1.1166.1.621.16.2.1 | ScalarvideoLock | read-only | current | Gives Video is locked or not |
| 1.3.6.1.4.1.1166.1.621.16.2.2 | ScalarvideoPID | read-only | current | Gives video PID |
| 1.3.6.1.4.1.1166.1.621.16.3 | NodecodeDownload | |||
| 1.3.6.1.4.1.1166.1.621.16.3.1 | ScalarcodeDownloadBit | read-only | current | Monitor the Code Download process 0 - off 1 - on |
| 1.3.6.1.4.1.1166.1.621.16.4 | NodeirdStatus | |||
| 1.3.6.1.4.1.1166.1.621.16.4.1 | NodefalseLock | |||
| 1.3.6.1.4.1.1166.1.621.16.4.1.1 | ScalarfalseLockStatus | read-only | current | Checks for false lock |
| 1.3.6.1.4.1.1166.1.621.16.4.2 | NodealarmLedStatus | |||
| 1.3.6.1.4.1.1166.1.621.16.4.2.1 | ScalaralarmLEDBlinkStatus | read-only | current | 0 - LED is not blinking(OFF/ON) 1 - LED is blinking |
| 1.3.6.1.4.1.1166.1.621.16.5 | Nodemessages | |||
| 1.3.6.1.4.1.1166.1.621.16.5.1 | ScalarpatMsgCount | read-only | current | Gives PAT Message Count |
| 1.3.6.1.4.1.1166.1.621.16.5.2 | ScalarcaMsgCount | read-only | current | Gives CA Message Count |
| 1.3.6.1.4.1.1166.1.621.16.5.3 | ScalarpmtMsgCount | read-only | current | Gives PMT message Count |
| 1.3.6.1.4.1.1166.1.621.16.5.4 | ScalarniMsgCount | read-only | current | Gives Network Information Message Count |
| 1.3.6.1.4.1.1166.1.621.16.5.5 | ScalarnetworkTextMsgCount | read-only | current | Gives Network text Message Count |
| 1.3.6.1.4.1.1166.1.621.16.5.6 | ScalarvirtualChannelMsgCount | read-only | current | Gives Virtual channel message Count |
| 1.3.6.1.4.1.1166.1.621.16.5.7 | ScalarsubtitleMsgCount | read-only | current | Gives Subtitle Message Count |
| 1.3.6.1.4.1.1166.1.621.16.5.8 | ScalarcoMsgCount | read-only | current | Gives Channel Override Message Count |
| 1.3.6.1.4.1.1166.1.621.16.5.9 | ScalardwnldPreMsgCount | read-only | current | Gives Download preamble message Count |
| 1.3.6.1.4.1.1166.1.621.16.5.10 | ScalardwnldMsgCount | read-only | current | Gives Download Message Count |
| 1.3.6.1.4.1.1166.1.621.16.5.11 | ScalaremmMsgCount | read-only | current | Gives EMM Message Count |
| 1.3.6.1.4.1.1166.1.621.16.5.12 | ScalarfingerPrintMessageCount | read-only | current | Gives Finger Print message Count |
| 1.3.6.1.4.1.1166.1.621.16.5.13 | ScalarhcmMsgCount | read-only | current | Gives hardware control Message Count |
| 1.3.6.1.4.1.1166.1.621.16.5.14 | ScalaruimMsgCount | read-only | current | Gives Unit information message Count |
| 1.3.6.1.4.1.1166.1.621.16.5.15 | ScalarevenBlkoutMsgCount | read-only | current | Gives Event Blckout Message message Count |
| 1.3.6.1.4.1.1166.1.621.16.6 | Noderf | |||
| 1.3.6.1.4.1.1166.1.621.16.6.1 | ScalarfrequencyOffset | read-only | current | The acquired offset of the L-band frequency in MHz. |
| 1.3.6.1.4.1.1166.1.621.16.6.2 | Scalarber | read-only | current | This displays Bit Errors. |
| 1.3.6.1.4.1.1166.1.621.16.6.3 | Scalarebno | read-only | current | This displays the Eb/No measured in the IRD. |
| 1.3.6.1.4.1.1166.1.621.16.6.4 | Scalarrserror | read-only | current | This displays the Reed Solomon Errors. |
| 1.3.6.1.4.1.1166.1.621.16.6.5 | Scalarlostlockcount | read-only | current | This displays the number of times tuner lost lock. |
| 1.3.6.1.4.1.1166.1.621.16.6.6 | Scalarclearrserror | read-write | current | Clears the rserror counter to zero. |
| 1.3.6.1.4.1.1166.1.621.16.6.7 | Scalarclearlostlockcount | read-write | current | Clears the lostlockcount counter to zero. |
| 1.3.6.1.4.1.1166.1.621.16.6.8 | Scalarsnr | read-only | current | This displays the SNR value. |