MIB Viewer

Dell-POLICY-MIB

368 objects
The private MIB module definition generic traffic policy in Dell devices.
Imported Objects
Dell-BRIDGEMIBOBJECTS-MIBVlanList1 VlanList2 VlanList3 VlanList4
Dell-MIBPercents rnd VlanPriority
DIFF-SERV-MIBdiffServClassifierEntry
IF-MIBInterfaceIndex InterfaceIndexOrZero
Q-BRIDGE-MIBPortList VlanId
SNMPv2-SMICounter32 Counter64 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 zeroDotZero
SNMPv2-TCDisplayString RowPointer RowStatus TEXTUAL-CONVENTION TruthValue
OIDNameAccessStatusDescription
1.3.6.1.4.1.89.59IdentityrlPolicyThe private MIB module definition generic traffic policy in Dell devices.
1.3.6.1.4.1.89.59.1ScalarrlPolicyMibVersionread-onlycurrentMIB's version, the current version is 14 1 - original version 2 - two new fields rlPolicyActionChangeDscpNonConform rlPolicyActionNewDscpNonConform were added.…
1.3.6.1.4.1.89.59.2NoderlPolicyClassifier
1.3.6.1.4.1.89.59.2.1NoderlPolicyClassifierPlatDependParams
1.3.6.1.4.1.89.59.2.1.1ScalarrlPolicyFlowClassificationOffsetsGroupSchemeread-onlycurrentSome platforms allow Policy statements to examine all packet offsets(Opal); other platforms require specification of specific byte offsets for routedIp packets…
1.3.6.1.4.1.89.59.2.1.2ScalarrlPolicyNumberOfOffsetsPerFlowClassificationOffsetGroupread-onlyobsoleteFor platforms which require an FCOG, indicates the maximum number of byte offsets specifiable for each offset group.
1.3.6.1.4.1.89.59.2.1.3ScalarrlPolicyFlowClassificationOffsetGroupMaximumOffsetread-onlycurrentIndicates the maximum value of a byte offset in a Flow Classification Offset Group. If 0, there is no limit.
1.3.6.1.4.1.89.59.2.1.4ScalarrlPolicyNumberOfOffsetsPerOmpcGroupread-onlycurrentindicates the maximum number of byte offsets specifiable for each Ompc offset group.
1.3.6.1.4.1.89.59.2.1.5ScalarrlPolicyOmpcMaximumOffsetread-onlycurrentIndicates the maximum value of a byte offset in a Ompc Group. If 0, there is no limit.
1.3.6.1.4.1.89.59.2.1.6ScalarrlPolicyOMPCPermittedOperatorsread-onlycurrentA bit mask indicating which operators are permissable in an OMPC: |87654321| 1 - equal operator permitted 2 - not-equal operator permitted 3 - greater-than ope…
1.3.6.1.4.1.89.59.2.1.7ScalarrlPolicyMaxOMPCLengthForBiggerSmallerOperationread-onlycurrentIndicates the maximal permissible length of an OMPC using bigger' or 'smaller' condition. If 0, there is no limit.
1.3.6.1.4.1.89.59.2.1.8ScalarrlPolicyClassifierAdditionalCriteriaSupportedread-onlyobsoleteA bit mask indicating which additional Criteria may be supported by the classifier: |87654321| 1 - input port supported 2 - output port supported 3 - VLAN ID f…
1.3.6.1.4.1.89.59.2.1.9ScalarrlPolicyClassifierAdditionalCriteriaUsedInOffsetCountread-onlyobsoleteIndicates whether the additional FCOG or Classifier criteria (ie. inPort, outPort VID count towards the maximum number of offsets ie. whether using inPort in t…
1.3.6.1.4.1.89.59.2.1.10ScalarrlPolicyClassifierPermittedOffsetTypesread-onlyobsoleteA bit mask indicating which offset types are supported by the platform for FCOG and OMPC definitions: |87654321| 1 - L2 offsets supported 2 - L3 offsets suppor…
1.3.6.1.4.1.89.59.2.1.11ScalarrlPolicyClassifierOMPCActionsread-onlycurrentA bit mask indicating which operation could be performed with OPMC |87654321| 1 - equal, 2 - notEqual, 3 - bigger, 4 - smaller.
1.3.6.1.4.1.89.59.2.2TablerlPolicyFlowClassificationOffsetsTablenot-accessiblecurrentSpecifies the byte offsets that the platform can use for policy decisions. This table is used for platforms which impose limitations on choosing the OMPCs for …
1.3.6.1.4.1.89.59.2.2.1RowrlPolicyFlowClassificationOffsetsGroupEntrynot-accessiblecurrentThe flow classification offset table entry includes the following parameters
1.3.6.1.4.1.89.59.2.2.1.1ColumnrlPolicyFlowClassificationOffsetsGroupTyperead-onlycurrentSpecifies a classifier type for which offset bytes can be specified.
1.3.6.1.4.1.89.59.2.2.1.2ColumnrlPolicyFlowClassificationOffsetsGroupOffsetread-writecurrentThe list of offsets to be included in the Flow Classification Offset Group are specified as subidentifiers in the OID(after the first 2 bytes which must be 1.1…
1.3.6.1.4.1.89.59.2.2.1.3ColumnrlPolicyFlowClassificationOffsetsGroupOffsetTyperead-writecurrentIndicates whether the corresponding byte denotes an offset from beginning of L2, from the beginning of L3 IPv4 packet data or from the beginning of L3 IPv6 pac…
1.3.6.1.4.1.89.59.2.2.1.4ColumnrlPolicyFlowClassificationOffsetsGroupMaskread-writecurrentThe list of masks corresponding to the offsets to be included in the Flow Classification Offset Group are specified as bytes in the OID(after the first 2 bytes…
1.3.6.1.4.1.89.59.2.2.1.5ColumnrlPolicyFlowClassificationOffsetsGroupUseInputInterfaceread-writecurrentIndicates whether or not the Input Interface Index is usable in Policy Rule definitions.
1.3.6.1.4.1.89.59.2.2.1.6ColumnrlPolicyFlowClassificationOffsetsGroupUseOutputInterfaceread-writecurrentIndicates whether or not the Output Interface Index(ie. routing/bridging decision) is usable in Policy Rule definitions
1.3.6.1.4.1.89.59.2.2.1.7ColumnrlPolicyFlowClassificationOffsetsGroupUseVlanIdread-writecurrentIndicates whether or not the VlanId is usable in Policy Rule definitions for bridged packets
1.3.6.1.4.1.89.59.2.2.1.8ColumnrlPolicyFlowClassificationOffsetsGroupStatusread-writecurrentThe status of a table entry. It is used to delete an entry from this table.
1.3.6.1.4.1.89.59.2.2.1.9ColumnrlPolicyFlowClassificationOffsetsGroupUseVPTIdread-writecurrentIndicates whether or not the VPT is usable in Policy Rule definitions for bridged packets
1.3.6.1.4.1.89.59.2.2.1.10ColumnrlPolicyFlowClassificationOffsetsGroupUseEtherTypeIdread-writecurrentIndicates whether or not the EtherType is usable in Policy Rule definitions for bridged packets
1.3.6.1.4.1.89.59.2.2.1.11ColumnrlPolicyFlowClassificationOffsetsGroupUseInnerVlanIdread-writecurrentIndicates whether or not the inner VlanId is usable in Policy Rule definitions for bridged packets
1.3.6.1.4.1.89.59.2.3TablerlPolicyOMPCTablenot-accessiblecurrentThe table of OMPC statements.
1.3.6.1.4.1.89.59.2.3.1RowrlPolicyOMPCEntrynot-accessiblecurrentEach classification statement consists of the following parameters
1.3.6.1.4.1.89.59.2.3.1.1ColumnrlPolicyOMPCGroupTyperead-onlycurrentSpecifies a classifier type for which offset bytes can be specified.
1.3.6.1.4.1.89.59.2.3.1.2ColumnrlPolicyOMPCIndexread-onlycurrentIndex into the OMPC Table.
1.3.6.1.4.1.89.59.2.3.1.3ColumnrlPolicyOMPCOffsetread-writecurrentSpecifies the offset within the frame (in bytes) from the layer according to rlPolicyGroupType. The limitation of this field is according to the rlPolicyFlowCl…
1.3.6.1.4.1.89.59.2.3.1.4ColumnrlPolicyOMPCOffsetTyperead-writecurrentIndicates whether the offset should be interpreted as relative to the beginning of L2 or the beginning of L3
1.3.6.1.4.1.89.59.2.3.1.5ColumnrlPolicyOMPCMaskread-writecurrentSpecifies which bits of the rlPolicyOMPCPattern field are significant for packet comparison. The length of the mask, in case of 'bigger' or 'smaller' rlPolicyO…
1.3.6.1.4.1.89.59.2.3.1.6ColumnrlPolicyOMPCPatternread-writecurrentDescribes the mask field. The length of this object must be equal to the length of rlPolicyOMPCMask.
1.3.6.1.4.1.89.59.2.3.1.7ColumnrlPolicyOMPCConditionread-writecurrentThese define the operation carried out on the two 'operands' (frame and pattern), i.e. Bigger means that frame bits should be bigger than pattern bits. The per…
1.3.6.1.4.1.89.59.2.3.1.8ColumnrlPolicyOMPCDescriptionread-writecurrentFree text specifing the nature of this OMPC.
1.3.6.1.4.1.89.59.2.3.1.9ColumnrlPolicyOMPCStatusread-writecurrentThe status of a table entry. It is used to delete an entry from this table.
1.3.6.1.4.1.89.59.2.4TablerlPolicyClassifierTablenot-accessiblecurrentThe table of Classifier statement.
1.3.6.1.4.1.89.59.2.4.1RowrlPolicyClassifierEntrynot-accessiblecurrentClassifiers can be of the ingress, egress, or post-routing phase varieties. Each multifield classification statement consists of the following parameters.
1.3.6.1.4.1.89.59.2.4.1.1ColumnrlPolicyClassifierTyperead-onlycurrentSpecifies a classifier type for which offset bytes can be specified.
1.3.6.1.4.1.89.59.2.4.1.2ColumnrlPolicyClassifierListIndexread-onlycurrentList Index into the Classifier Table.
1.3.6.1.4.1.89.59.2.4.1.3ColumnrlPolicyClassifierSubListIndexread-onlycurrentSubList Index into the Classifier Table.
1.3.6.1.4.1.89.59.2.4.1.4ColumnrlPolicyClassifierIndexread-onlycurrentIndex into the Classifier Table.
1.3.6.1.4.1.89.59.2.4.1.5ColumnrlPolicyClassifierOmpcListread-writecurrentThe list of OMPCs to check with this Classifier. Each subidentifier together with rlPolicyClassifierType specify one OMPC.
1.3.6.1.4.1.89.59.2.4.1.6ColumnrlPolicyClassifierInIfIndexread-writecurrentInput interface index to be compared with received packet, a value of 0 denotes that the classifier is applied to all ports.
1.3.6.1.4.1.89.59.2.4.1.7ColumnrlPolicyClassifierOutIfIndexread-writecurrentOutput interface index to be compared with sent packet, a value of 0 denotes that the classifier is applied to all ports.
1.3.6.1.4.1.89.59.2.4.1.8ColumnrlPolicyClassifierVIDread-writecurrentVLAN ID, used only for bridged traffic.
1.3.6.1.4.1.89.59.2.4.1.9ColumnrlPolicyClassifierDiffservInIfTyperead-writecurrentFor a classifier used by the Diffserv Rules table. Enables specification of a classifier that should apply to all Diffserv boundary ports or all Diffserv Inter…
1.3.6.1.4.1.89.59.2.4.1.10ColumnrlPolicyClassifierDiffservOutIfTyperead-writecurrentFor a classifier used by the Diffserv Rules table. Enables specification of a classifier that should apply to outbound traffic on all Diffserv boundary ports o…
1.3.6.1.4.1.89.59.2.4.1.11ColumnrlPolicyClassifierStatusread-writecurrentThe status of a table entry. It is used to delete an entry from this table.
1.3.6.1.4.1.89.59.2.4.1.12ColumnrlPolicyClassifierInIfIndexListread-writecurrentallow to define list of ports for the specific classifier for ingress classification. if rlPolicyClassifierInIfIndex equal to zero then the following list shou…
1.3.6.1.4.1.89.59.2.4.1.13ColumnrlPolicyClassifierOutIfIndexListread-writecurrentallow to define list of ports for the specific classifier for egress classification. if rlPolicyClassifierOutIfIndex equal to zero then the following list shou…
1.3.6.1.4.1.89.59.2.4.1.14ColumnrlPolicyClassifierVPTIDread-writecurrentVPT ID - user priority tag to be compared with . 8 is used to indicate not used value for this classifier
1.3.6.1.4.1.89.59.2.4.1.15ColumnrlPolicyClassifierVPTIDMaskread-writecurrentVPT ID Mask ,mask the user priority field . 0 is the default indicate Mask all compared with any VPT value
1.3.6.1.4.1.89.59.2.4.1.16ColumnrlPolicyClassifierEtherTypeIDread-writecurrentEtherType ID, to be compared with. 65535 is used to indicate not used value for this classifier 1499 is uded to indicate IPv4 ethertype that is originated from…
1.3.6.1.4.1.89.59.2.4.1.17ColumnrlPolicyClassifierInnerVIDread-writecurrentINNER VLAN ID, used only for double tagged traffic.
1.3.6.1.4.1.89.59.3NoderlPolicyRules
1.3.6.1.4.1.89.59.3.1NoderlPolicyRulesPlatDependParams
1.3.6.1.4.1.89.59.3.1.1ScalarrlPolicyDroppedPacketCountSupportedread-onlycurrentIndicates whether the dropped packets counter in the rlPolicyRulesTable is supported.
1.3.6.1.4.1.89.59.3.1.2ScalarrlPolicyFilterActionOptionsread-onlycurrentA bit mask indicating which operation could be perform |87654321| 1 - block, 2 - blockAndTrap, 3 - permitAndTrap, 4 - permit.
1.3.6.1.4.1.89.59.3.1.3ScalarrlPolicyIngressMeteringSupportedread-onlycurrentSpecifies whether the platform supports metering in inbound packet rules.
1.3.6.1.4.1.89.59.3.1.4ScalarrlPolicyEgressMeteringSupportedread-onlycurrentSpecifies whether the platform supports metering on outbound packet rules (for Diffserv).
1.3.6.1.4.1.89.59.3.2TablerlPolicyRulesTablenot-accessiblecurrentThe table of rules and Rules statements applied to all incoming traffic at the post-routing phase - ie. both the inPort and outPort are available for classific…
1.3.6.1.4.1.89.59.3.2.1RowrlPolicyRulesEntrynot-accessiblecurrentEach multifield classification statement consists of the following parameters.
1.3.6.1.4.1.89.59.3.2.1.1ColumnrlPolicyRulesTableTyperead-onlycurrentSpecifies a classifier type for which offset bytes can be specified.
1.3.6.1.4.1.89.59.3.2.1.2ColumnrlPolicyRulesInterfaceDirectionread-onlycurrentSpecifies the direction for this entry on the interface. 'inbound' traffic is operated on during receipt, while 'outbound' traffic is operated on prior to tran…
1.3.6.1.4.1.89.59.3.2.1.3ColumnrlPolicyRulesListIndexread-onlycurrentEnumerates the rule list entry.
1.3.6.1.4.1.89.59.3.2.1.4ColumnrlPolicyRulesSubListIndexread-onlycurrentEnumerates the rule sub-list entry.
1.3.6.1.4.1.89.59.3.2.1.5ColumnrlPolicyRulesIndexread-onlycurrentEnumerates the rule index entry.
1.3.6.1.4.1.89.59.3.2.1.6ColumnrlPolicyRulesFilteringActionread-writecurrentSpecifies the action for the filter. Values 1-10 reserved for the System filtering implemetation; Values starting from 11 may be used for user definition about…
1.3.6.1.4.1.89.59.3.2.1.7ColumnrlPolicyRulesDroppedPacketsread-onlycurrentThe number of packets blocked by this filtering rule.
1.3.6.1.4.1.89.59.3.2.1.8ColumnrlPolicyRulesFurtherRefPointerread-writecurrentThis further reference indicate on the entry at the metering or action table, based on the supported features. The rlPolicyRulesFurtherRefPointer points on the…
1.3.6.1.4.1.89.59.3.2.1.9ColumnrlPolicyRulesDescriptionread-writecurrentFree text specifing the nature of this Rule.
1.3.6.1.4.1.89.59.3.2.1.10ColumnrlPolicyRulesStatusread-writecurrentRow status of the Rules entry.
1.3.6.1.4.1.89.59.3.2.1.11ColumnrlPolicyRulesCounterIdxread-writecurrentIf not zero, perform counting of matched packets .
1.3.6.1.4.1.89.59.3.2.1.12ColumnrlPolicyRulesCounterread-onlycurrentThe number of packets that matched this filtering rule.
1.3.6.1.4.1.89.59.3.2.1.13ColumnrlPolicyRulesActionPointerread-writecurrentThis further reference indicate on the entry at the action table, The rlPolicyRulesActionPointer points on the action table if the aggregate metering feature i…
1.3.6.1.4.1.89.59.3.2.1.14ColumnrlPolicyRulesTimeRange1read-writecurrentTime range of the first ACL.
1.3.6.1.4.1.89.59.3.2.1.15ColumnrlPolicyRulesTimeRange2read-writecurrentTime range of the second ACL.
1.3.6.1.4.1.89.59.3.2.1.16ColumnrlPolicyRulesSrcPortRangeStartread-writecurrentStart port of port range for source port.
1.3.6.1.4.1.89.59.3.2.1.17ColumnrlPolicyRulesSrcPortRangeEndread-writecurrentEnd port of port range for source port.
1.3.6.1.4.1.89.59.3.2.1.18ColumnrlPolicyRulesDestPortRangeStartread-writecurrentStart port of port range for destination port.
1.3.6.1.4.1.89.59.3.2.1.19ColumnrlPolicyRulesDestPortRangeEndread-writecurrentEnd port of port range for destination port.
1.3.6.1.4.1.89.59.3.2.1.20ColumnrlPolicyRulesActionDropTyperead-writecurrentThis field is valid only if rlPolicyRulesFilteringAction is not permit. Used to distinguish between Hard and Soft drop.
1.3.6.1.4.1.89.59.3.3ScalarrlPolicyRulesDownloadMarkerread-writecurrentIndicates when rules download or removing starts and terminates.
1.3.6.1.4.1.89.59.4NoderlPolicyMeterClass
1.3.6.1.4.1.89.59.4.1NoderlPolicyMeterPlatDependParams
1.3.6.1.4.1.89.59.4.1.1ScalarrlPolicyMeterDepthread-onlycurrentIndicates how many meters can be chained in succession (ie. so that if the first meter fails, the second can be examined). The final meter in a sequence is alw…
1.3.6.1.4.1.89.59.4.2TablerlPolicyMeterClassTablenot-accessiblecurrentThis table defines the Metering classes for the system.
1.3.6.1.4.1.89.59.4.2.1RowrlPolicyMeteringClassEntrynot-accessiblecurrentEach statement consists of the following parameters
1.3.6.1.4.1.89.59.4.2.1.1ColumnrlPolicyMeteringClassIndexread-onlycurrentThis enumerates the table entry.
1.3.6.1.4.1.89.59.4.2.1.2ColumnrlPolicyMeteringClassAlwaysConformread-writecurrentIf true, the meter always accepts all traffic; its rate is effectively infinite. In such a case, the token bucket defined by the MeterRate and Burst-Size param…
1.3.6.1.4.1.89.59.4.2.1.3ColumnrlPolicyMeteringClassAggregateMeterRateread-writecurrentThe rate in kilobytes/second of traffic considered within the bandwidth allocated for this policy entry.
1.3.6.1.4.1.89.59.4.2.1.4ColumnrlPolicyMeteringClassAggregateMeterBurstSizeread-writecurrentThe Burst Size parameter for the aggregate meter leaky bucket. A value of 0 means that the device should choose the Burst Size that it thinks is most suitable …
1.3.6.1.4.1.89.59.4.2.1.5ColumnrlPolicyMeteringClassPerSessionMeteringRateread-writecurrentA Quantitative Appliction policy rule where each individual session requires a guaranteed minimum bandwidth. Specifies the Ingress traffic flow meter per sessi…
1.3.6.1.4.1.89.59.4.2.1.6ColumnrlPolicyMeteringClassMaxSessionLimitread-writecurrentindicate a the maximum number of session for a sepecific rule to guarante minimum bandwidth. Value 0 at rlPolicyMeteringClassPerSessionMetering and rlPolicyMet…
1.3.6.1.4.1.89.59.4.2.1.7ColumnrlPolicyMeteringClassActionPointerread-writecurrentSpecifies the index in the rlPolicyActionTable to be accessed for packets that are in-profile. Value 0 is interpreted to mean no action. A non-zero value may b…
1.3.6.1.4.1.89.59.4.2.1.8ColumnrlPolicyMeteringClassFailMeterPointerread-writecurrentSpecifies an index in the rlPolicyMeterClassTable. This is the meter that is to be used if the packet is out-of-profile relative to the current meter. If non-D…
1.3.6.1.4.1.89.59.4.2.1.9ColumnrlPolicyMeteringClassStatusread-writecurrentThe status of a table entry. It is used to delete an entry from this table.
1.3.6.1.4.1.89.59.4.2.1.10ColumnrlPolicyMeteringCounterEnableread-writecurrentEnable metering counter for the meter entry.
1.3.6.1.4.1.89.59.4.2.1.11ColumnrlPolicyMeteringClassInProfileCounterread-onlycurrentmeter counter for packets that are in profile .
1.3.6.1.4.1.89.59.4.2.1.12ColumnrlPolicyMeteringClassOutProfileCounterread-onlycurrentmeter counter for packets that are out of profile
1.3.6.1.4.1.89.59.5NoderlPolicyAction
1.3.6.1.4.1.89.59.5.1NoderlPolicyActionPlatDependParams
1.3.6.1.4.1.89.59.5.1.1ScalarrlPolicyActionMREDSupportedread-onlycurrentIndicates whether the platform supports setting MRED characteristics in the packet action
1.3.6.1.4.1.89.59.5.1.2ScalarrlPolicyActionDroppedPacketCountSupportedread-onlycurrentIndicates whether the platform can maintain a count of packets Marked for drop by a particular action.
1.3.6.1.4.1.89.59.5.1.3ScalarrlPolicyActionDroppedDropPrecedenceSupportedread-onlycurrentIndicates whether the platform support at drop precedence.
1.3.6.1.4.1.89.59.5.1.4ScalarrlPolicyActionInProfileDropPrecedenceread-onlycurrentA bit mask indicating which drop precedence supported |87654321| 1 - low, 2 - medium, 3 - high, 4 - drop
1.3.6.1.4.1.89.59.5.1.5ScalarrlPolicyActionOutProfileDropPrecedenceread-onlycurrentA bit mask indicating which drop precedence supported |87654321| 1 - low, 2 - medium, 3 - high, 4 - drop
1.3.6.1.4.1.89.59.5.1.6ScalarrlPolicyActionDscpSupportread-onlyobsoleteIndicates whether the platform support at DSCP filed modification.
1.3.6.1.4.1.89.59.5.1.7ScalarrlPolicyActionDsQueueManagmentSupportedread-onlyobsoleteIndicates whether the platform supports at Q managment for implementation, mred, randomDrop used by the min/max threshold
1.3.6.1.4.1.89.59.5.2TablerlPolicyActionTablenot-accessiblecurrentThis table defines the Actions for packets that pass the meter table ie. the characteristics that are assigned to packets before they reach the scheduler. When…
1.3.6.1.4.1.89.59.5.2.1RowrlPolicyActionEntrynot-accessiblecurrentEach multifield classification statement consists of the following parameters
1.3.6.1.4.1.89.59.5.2.1.1ColumnrlPolicyActionIndexread-onlycurrentThis enumerates the Action entry.
1.3.6.1.4.1.89.59.5.2.1.2ColumnrlPolicyActionNewDscpread-writecurrentIndicates the new DSCP with which the packet should be marked
1.3.6.1.4.1.89.59.5.2.1.3ColumnrlPolicyActionChangeDscpread-writecurrentIf true, the packet is re-marked with the value indicated by newDscp above. If false, the packet's DSCP value is not changed
1.3.6.1.4.1.89.59.5.2.1.4ColumnrlPolicyActionMinThresholdread-writecurrentThe min-threshold is the queue depth that a random drop process will seek to manage the queue's depth to. This object is in the action table rather than the qu…
1.3.6.1.4.1.89.59.5.2.1.5ColumnrlPolicyActionMaxThresholdread-writecurrentThe max-threshold is the maximum permissible queue depth. In tail drop scenarios, the queue will drop if a packet is presented to it and it is instantaneously …
1.3.6.1.4.1.89.59.5.2.1.6ColumnrlPolicyActionDropPolicyread-writecurrent
1.3.6.1.4.1.89.59.5.2.1.7ColumnrlPolicyActionDroppedPacketsread-onlycurrentThe number of packets dropped by this action
1.3.6.1.4.1.89.59.5.2.1.8ColumnrlPolicyActionNonDsInProfileDropPrecedenceread-writecurrentThis paramer is used at non diffserv mode to attached the drop precedence for packet InProfile (metering), only if there is a support for drop precedence and w…
1.3.6.1.4.1.89.59.5.2.1.9ColumnrlPolicyActionNonDsOutProfileDropPrecedenceread-writecurrentThis paramer is used at non diffserv mode to attached the drop precedence for packet OutProfile (metering), only if there is a support for drop precedence and …
1.3.6.1.4.1.89.59.5.2.1.10ColumnrlPolicyActionChangeVptread-writecurrentRouted packets that run through the Rules receive VPT as define at the service class they attached to, bridge packets receive through the 802.1p operation unle…
1.3.6.1.4.1.89.59.5.2.1.11ColumnrlPolicyActionNewVptread-writecurrentPriority Tag that will be written to packets .
1.3.6.1.4.1.89.59.5.2.1.12ColumnrlPolicyActionServiceClassPointerread-writecurrentSpecifies the index in rlPolicyServiceClassTable denoting the service class to which the packet should be assigned after the action specified in this entry is …
1.3.6.1.4.1.89.59.5.2.1.13ColumnrlPolicyActionStatusread-writecurrentThe status of the table entry
1.3.6.1.4.1.89.59.5.2.1.14ColumnrlPolicyActionChangeDscpNonConformread-writecurrentIf true, the packet is re-marked with the value indicated by newDscp for non conforming packets. If false, the packet's DSCP value is not changed
1.3.6.1.4.1.89.59.5.2.1.15ColumnrlPolicyActionChangeNewDscpNonConformread-writecurrentIndicates the new DSCP with which the packet should be marked
1.3.6.1.4.1.89.59.5.2.1.16ColumnrlPolicyActionAdvancedTrustModeread-writecurrentIndicates if egress queue is assigned for packets match rule according to global trust mode or note.
1.3.6.1.4.1.89.59.5.2.1.17ColumnrlPolicyActionNewIpPrecedenceread-writecurrentIndicates the new Ip- Precedence with which the packet should be marked
1.3.6.1.4.1.89.59.5.2.1.18ColumnrlPolicyActionChangeIpPrecedenceread-writecurrentIf true, the packet is re-marked with the value indicated by newIpPrecedence above. If false, the packet's DSCP value is not changed
1.3.6.1.4.1.89.59.5.2.1.19ColumnrlPolicyActionReDirectread-writecurrentSpecified the redirection action/
1.3.6.1.4.1.89.59.5.2.1.20ColumnrlPolicyActionNewInterfaceread-writecurrentRelevant if rlQosClassMapRedirect is either 'redirectToInterface' or 'analyzerPort'. Specified the output interface the packet is redireted to or the port that…
1.3.6.1.4.1.89.59.5.2.1.21ColumnrlPolicyActionChangeVidActionread-writecurrentIf 'mark', than the classified traffic will be remarked with new VLAN id. If 'disabled' VLAN id is not changed. If markNestedVlan, if the egress interface defi…
1.3.6.1.4.1.89.59.5.2.1.22ColumnrlPolicyActionNewVidread-writecurrentIf rlPolicyActionChangeVid is true, specify the new Vlan id to assigned to the packet
1.3.6.1.4.1.89.59.5.2.1.23ColumnrlPolicyActionTrapTypeIdread-writecurrentIf now zero, Indicates the trap type id the matched packets arrives with, relevant when RedirectAction is trap or mirror.
1.3.6.1.4.1.89.59.5.2.1.24ColumnrlPolicyActionAddTunnelread-writecurrentIf not zero - Tunnel is added to matched packets.
1.3.6.1.4.1.89.59.6NoderlPolicyServiceClass
1.3.6.1.4.1.89.59.6.1NoderlPolicyServiceClassPlatDependParams
1.3.6.1.4.1.89.59.6.1.1ScalarrlPolicyNumberOfServiceClassesSupportedread-onlycurrentIndicates the number of service classes supported on each port of the platform. Service classes can be neither created nor destroyed.
1.3.6.1.4.1.89.59.6.1.2ScalarrlPolicyBoundedPriorityQueueSupportread-onlyobsoleteIndicates whether the platform supports setting an upper limit to the bandwidth of traffic transmitted on queues operating in Strict Priority mode.
1.3.6.1.4.1.89.59.6.2ScalarrlPolicyDefaultServiceClassread-writecurrentIndicates which service class is default one for packets whose COS is undetermined.
1.3.6.1.4.1.89.59.6.3ScalarrlPolicyActiveServiceClassTableread-writecurrentSpecifies the Service Class table preform active action (usuarlly after set of entries at the service class tentative table). Specifies the current status of a…
1.3.6.1.4.1.89.59.6.4TablerlPolicyServiceClassTentativeTablenot-accessiblecurrentThis table defines the service classes for the system ie. the queue discipline and weight characteristics that are implemented on each port unless the user con…
1.3.6.1.4.1.89.59.6.4.1RowrlPolicyServiceClassTentativeEntrynot-accessiblecurrentEach multifield classification statement consists of the following parameters
1.3.6.1.4.1.89.59.6.4.1.1ColumnrlPolicyServiceClassTentativeIndexread-onlycurrentThis enumerates the ServiceClass Tentative entry.
1.3.6.1.4.1.89.59.6.4.1.2ColumnrlPolicyServiceClassTentativeNameread-writecurrentThe name given by the system administrator to the class.
1.3.6.1.4.1.89.59.6.4.1.3ColumnrlPolicyServiceClassTentativePhbTyperead-writecurrentIndicates the type of Diffserv per-hop behaviour that this service class is intended to support. This object can be set by the user only in DiffServ mode (i.e.…
1.3.6.1.4.1.89.59.6.4.1.4ColumnrlPolicyServiceClassTentativeMinRateread-writecurrentSpecifies either the minimum throughput of the queue as a percentage of the throughput of each output port on which the service class is implemented. If zero, …
1.3.6.1.4.1.89.59.6.4.1.5ColumnrlPolicyServiceClassTentativeMaxRateread-writecurrentSpecifies either the upper limit on the throughput of the queue as a percentage of the throughput of each output port on which the service class is implemented…
1.3.6.1.4.1.89.59.6.4.1.6ColumnrlPolicyServiceClassTentativePriorityread-writecurrentIf non-zero, this service class will operate as a priority service class with the specified priority value. This object can not be set in Diffserv mode (i.e. r…
1.3.6.1.4.1.89.59.6.4.1.7ColumnrlPolicyServiceClassTentative8021DPriread-writecurrent802.1D Priority Tag that will be written to routed packets and untagged bridged packets transmitted with this service class.
1.3.6.1.4.1.89.59.6.4.1.8ColumnrlPolicyServiceClassTentativeStatusread-writecurrentStatus of this entry.
1.3.6.1.4.1.89.59.6.4.1.9ColumnrlPolicyServiceClassTentativeTdThersholdDp0read-writecurrentTail Drop Threshold for Drop Precedence 0. UNITS percent 0-100
1.3.6.1.4.1.89.59.6.4.1.10ColumnrlPolicyServiceClassTentativeTdThersholdDp1read-writecurrentTail Drop Threshold for Drop Precedence 1. UNITS percent 0-100
1.3.6.1.4.1.89.59.6.4.1.11ColumnrlPolicyServiceClassTentativeTdThersholdDp2read-writecurrentTail Drop Threshold for Drop Precedence 2. UNITS percent 0-100
1.3.6.1.4.1.89.59.6.4.1.12ColumnrlPolicyServiceClassTentativeRedMinDp0read-writecurrentWRED Min Threshold for Drop Precedence 0. UNITS percent 0-100
1.3.6.1.4.1.89.59.6.4.1.13ColumnrlPolicyServiceClassTentativeRedMaxDp0read-writecurrentWRED Max Threshold for Drop Precedence 0. UNITS percent 0-100
1.3.6.1.4.1.89.59.6.4.1.14ColumnrlPolicyServiceClassTentativeRedProbDp0read-writecurrentWRED probability for Drop Precedence 0.
1.3.6.1.4.1.89.59.6.4.1.15ColumnrlPolicyServiceClassTentativeRedMinDp1read-writecurrentWRED Min Threshold for Drop Precedence 1. UNITS percent 0-100
1.3.6.1.4.1.89.59.6.4.1.16ColumnrlPolicyServiceClassTentativeRedMaxDp1read-writecurrentWRED Max Threshold for Drop Precedence 1. UNITS percent 0-100
1.3.6.1.4.1.89.59.6.4.1.17ColumnrlPolicyServiceClassTentativeRedProbDp1read-writecurrentWRED probability for Drop Precedence 1.
1.3.6.1.4.1.89.59.6.4.1.18ColumnrlPolicyServiceClassTentativeRedMinDp2read-writecurrentWRED Min Threshold for Drop Precedence 2. UNITS percent 0-100
1.3.6.1.4.1.89.59.6.4.1.19ColumnrlPolicyServiceClassTentativeRedMaxDp2read-writecurrentWRED Max Threshold for Drop Precedence 2. UNITS percent 0-100
1.3.6.1.4.1.89.59.6.4.1.20ColumnrlPolicyServiceClassTentativeRedProbDp2read-writecurrentWRED probability for Drop Precedence 2.
1.3.6.1.4.1.89.59.6.4.1.21ColumnrlPolicyServiceClassTentativeRedQweightread-writecurrentadditional parameter for the WRED algorithem supporting the Queue weight exponentail factor
1.3.6.1.4.1.89.59.6.4.1.22ColumnrlPolicyServiceClassTentativeShaperStatusread-writecurrentIf there is shaper on the Queue
1.3.6.1.4.1.89.59.6.4.1.23ColumnrlPolicyServiceClassTentativeCirQueueShaperread-writecurrentThe CIR for the Queue shaper. N/A when the shper is disabled. UNITS bps bits per second
1.3.6.1.4.1.89.59.6.4.1.24ColumnrlPolicyServiceClassTentativeCbsQueueShaperread-writecurrentThe CBS for the Queue shaper. N/A when the shper is disabled. UNITS bytes
1.3.6.1.4.1.89.59.6.5TablerlPolicyServiceClassActiveTablenot-accessiblecurrentThis table defines the service classes for the system ie. the queue discipline and weight characteristics that are implemented on each port unless the user con…
1.3.6.1.4.1.89.59.6.5.1RowrlPolicyServiceClassActiveEntrynot-accessiblecurrentEach multifield classification statement consists of the following parameters
1.3.6.1.4.1.89.59.6.5.1.1ColumnrlPolicyServiceClassActiveIndexread-onlycurrentThis enumerates the ServiceClass Active entry.
1.3.6.1.4.1.89.59.6.5.1.2ColumnrlPolicyServiceClassActiveNameread-onlycurrentThe name given by the system administrator to the class.
1.3.6.1.4.1.89.59.6.5.1.3ColumnrlPolicyServiceClassActivePhbTyperead-onlycurrentIndicates the type of Diffserv per-hop behaviour that this service class is intended to support. This object can be set by the user only in DiffServ mode (i.e.…
1.3.6.1.4.1.89.59.6.5.1.4ColumnrlPolicyServiceClassActiveMinRateread-onlycurrentSpecifies either the minimum throughput of the queue as a percentage of the throughput of each output port on which the service class is implemented. If zero, …
1.3.6.1.4.1.89.59.6.5.1.5ColumnrlPolicyServiceClassActiveMaxRateread-onlycurrentSpecifies either the upper limit on the throughput of the queue as a percentage of the throughput of each output port on which the service class is implemented…
1.3.6.1.4.1.89.59.6.5.1.6ColumnrlPolicyServiceClassActivePriorityread-onlycurrentIf non-zero, this service class will operate as a priority service class with the specified priority value. This object can not be set in Diffserv mode (i.e. r…
1.3.6.1.4.1.89.59.6.5.1.7ColumnrlPolicyServiceClassActive8021DPriread-onlycurrent802.1D Priority Tag that will be written to routed packets and untagged bridged packets transmitted with this service class.
1.3.6.1.4.1.89.59.6.5.1.8ColumnrlPolicyServiceClassActiveTdThersholdDp0read-onlycurrentTail Drop Threshold for Drop Precedence 0. UNITS percent 0-100
1.3.6.1.4.1.89.59.6.5.1.9ColumnrlPolicyServiceClassActiveTdThersholdDp1read-onlycurrentTail Drop Threshold for Drop Precedence 1. UNITS percent 0-100
1.3.6.1.4.1.89.59.6.5.1.10ColumnrlPolicyServiceClassActiveTdThersholdDp2read-onlycurrentTail Drop Threshold for Drop Precedence 2. UNITS percent 0-100
1.3.6.1.4.1.89.59.6.5.1.11ColumnrlPolicyServiceClassActiveRedMinDp0read-onlycurrentWRED Min Threshold for Drop Precedence 0. UNITS percent 0-100
1.3.6.1.4.1.89.59.6.5.1.12ColumnrlPolicyServiceClassActiveRedMaxDp0read-onlycurrentWRED Max Threshold for Drop Precedence 0. UNITS percent 0-100
1.3.6.1.4.1.89.59.6.5.1.13ColumnrlPolicyServiceClassActiveRedProbDp0read-onlycurrentWRED probability for Drop Precedence 0.
1.3.6.1.4.1.89.59.6.5.1.14ColumnrlPolicyServiceClassActiveRedMinDp1read-onlycurrentWRED Min Threshold for Drop Precedence 1. UNITS percent 0-100
1.3.6.1.4.1.89.59.6.5.1.15ColumnrlPolicyServiceClassActiveRedMaxDp1read-onlycurrentWRED Max Threshold for Drop Precedence 1. UNITS percent 0-100
1.3.6.1.4.1.89.59.6.5.1.16ColumnrlPolicyServiceClassActiveRedProbDp1read-onlycurrentWRED probability for Drop Precedence 1.
1.3.6.1.4.1.89.59.6.5.1.17ColumnrlPolicyServiceClassActiveRedMinDp2read-onlycurrentWRED Min Threshold for Drop Precedence 2. UNITS percent 0-100
1.3.6.1.4.1.89.59.6.5.1.18ColumnrlPolicyServiceClassActiveRedMaxDp2read-onlycurrentWRED Max Threshold for Drop Precedence 2. UNITS percent 0-100
1.3.6.1.4.1.89.59.6.5.1.19ColumnrlPolicyServiceClassActiveRedProbDp2read-onlycurrentWRED probability for Drop Precedence 2.
1.3.6.1.4.1.89.59.6.5.1.20ColumnrlPolicyServiceClassActiveRedQweightread-onlycurrentadditional parameter for the WRED algorithem supporting the Queue weight exponentail factor
1.3.6.1.4.1.89.59.6.5.1.21ColumnrlPolicyServiceClassActiveShaperStatusread-onlycurrentIf there is shaper on the Queue
1.3.6.1.4.1.89.59.6.5.1.22ColumnrlPolicyServiceClassActiveCirQueueShaperread-onlycurrentThe CIR for the queue shaper. N/A when the shper is disabled UNITS bps bits per second
1.3.6.1.4.1.89.59.6.5.1.23ColumnrlPolicyServiceClassActiveCbsQueueShaperread-onlycurrentThe CBS for the queue shaper. N/A when the shper is disabled. UNITS bytes
1.3.6.1.4.1.89.59.6.6TablerlPolicyPortConfigurationTablenot-accessiblecurrentThis table enables the network administrator to fine-tune the bandwidth given to each service class on each port. The values in this table will thus override t…
1.3.6.1.4.1.89.59.6.6.1RowrlPolicyPortCfgEntrynot-accessiblecurrentConfiguration parameters for each port/service class.
1.3.6.1.4.1.89.59.6.6.1.1ColumnrlPolicyPortCfgIfIndexread-onlycurrentInterface index.
1.3.6.1.4.1.89.59.6.6.1.2ColumnrlPolicyPortCfgMinimalBandwidthread-writecurrentThe list of objects contain parameters at Precents type for the minimal bandwidth to this port/service class at WWR . The OID length is based on the number of …
1.3.6.1.4.1.89.59.6.6.1.3ColumnrlPolicyPortCfgMaximalBandwidthread-writecurrentThe list of objects contain parameters at Precents type for the maximal bandwidth to this port/service class at SP . The OID length is based on the number of t…
1.3.6.1.4.1.89.59.6.6.1.4ColumnrlPolicyPortCfgStatusread-writecurrentStatus of this entry.
1.3.6.1.4.1.89.59.6.6.1.5ColumnrlpolicyDropProfilePointerread-writecurrentpointing to drop algorithem profile. the profile describs the drop algorithem (tail, red)and params
1.3.6.1.4.1.89.59.6.6.1.6ColumnrlPolicyPortCfgQueueShaperStatusread-writecurrentIf there is shaper on the Queue
1.3.6.1.4.1.89.59.6.6.1.7ColumnrlPolicyPortCfgCirQueueShaperread-writecurrentThe CIR for the Queue shaper. N/A when the shper is disabled UNITS bps bits per second
1.3.6.1.4.1.89.59.6.6.1.8ColumnrlPolicyPortCfgCbsQueueShaperread-writecurrentThe CBS for the Queue shaper. N/A when the shper is disabled. UNITS bytes
1.3.6.1.4.1.89.59.6.6.1.9ColumnrlPolicyPortCfgPortShaperStatusread-writecurrentIf there is shaper on the port
1.3.6.1.4.1.89.59.6.6.1.10ColumnrlPolicyPortCfgCirPortShaperread-writecurrentThe CIR for the port shaper. N/A when the shper is disabled UNITS bps bits per second
1.3.6.1.4.1.89.59.6.6.1.11ColumnrlPolicyPortCfgCbsPortShaperread-writecurrentThe CBS for the port shaper. N/A when the shper is disabled. UNITS bytes
1.3.6.1.4.1.89.59.6.6.1.12ColumnrlPolicyPortCfgPortRateLimitStatusread-writecurrentIf there is Rate Limit on the port
1.3.6.1.4.1.89.59.6.6.1.13ColumnrlPolicyPortCfgCirPortRateLimitread-writecurrentThe CIR for the port Rate limit. N/A when the Rate limit is disabled UNITS bps bits per second
1.3.6.1.4.1.89.59.6.6.1.14ColumnrlPolicyPortCfgCbsPortRateLimitread-writecurrentThe CBS for the port Rate Limit. N/A when the Rate Limit is disabled. UNITS bytes
1.3.6.1.4.1.89.59.6.7TablerlPolicyDropProfileTablenot-accessiblecurrentthis table defines drop profile which describ the queue's drop algorithems
1.3.6.1.4.1.89.59.6.7.1RowrlPolicyDropProfileEntrynot-accessiblecurrentConfiguration parameters for each port/service class.
1.3.6.1.4.1.89.59.6.7.1.1ColumnrlPolicyDropProfileIndexread-onlycurrentInterface index.
1.3.6.1.4.1.89.59.6.7.1.2ColumnrlPolicyDropProfileQueueNumberread-onlycurrentInterface Queue number.
1.3.6.1.4.1.89.59.6.7.1.3ColumnrlPolicyDropProfileTdThersholdDp0read-writecurrentTail Drop Threshold for Drop Precedence 0. UNITS percent 0-100
1.3.6.1.4.1.89.59.6.7.1.4ColumnrlPolicyDropProfileTdThersholdDp1read-writecurrentTail Drop Threshold for Drop Precedence 1. UNITS percent 0-100
1.3.6.1.4.1.89.59.6.7.1.5ColumnrlPolicyDropProfileTdThersholdDp2read-writecurrentTail Drop Threshold for Drop Precedence 2. UNITS percent 0-100
1.3.6.1.4.1.89.59.6.7.1.6ColumnrlPolicyDropProfileRedMinDp0read-writecurrentWRED Min Threshold for Drop Precedence 0. UNITS percent 0-100
1.3.6.1.4.1.89.59.6.7.1.7ColumnrlPolicyDropProfileRedMaxDp0read-writecurrentWRED Max Threshold for Drop Precedence 0. UNITS percent 0-100 0-100
1.3.6.1.4.1.89.59.6.7.1.8ColumnrlPolicyDropProfileRedProbDp0read-writecurrentWRED probability for Drop Precedence 0.
1.3.6.1.4.1.89.59.6.7.1.9ColumnrlPolicyDropProfileRedMinDp1read-writecurrentWRED Min Threshold for Drop Precedence 1. UNITS percent 0-100
1.3.6.1.4.1.89.59.6.7.1.10ColumnrlPolicyDropProfileRedMaxDp1read-writecurrentWRED Max Threshold for Drop Precedence 1. UNITS percent 0-100
1.3.6.1.4.1.89.59.6.7.1.11ColumnrlPolicyDropProfileRedProbDp1read-writecurrentWRED probability for Drop Precedence 1.
1.3.6.1.4.1.89.59.6.7.1.12ColumnrlPolicyDropProfileRedMinDp2read-writecurrentWRED Min Threshold for Drop Precedence 2. UNITS percent 0-100
1.3.6.1.4.1.89.59.6.7.1.13ColumnrlPolicyDropProfileRedMaxDp2read-writecurrentWRED Max Threshold for Drop Precedence 2. UNITS percent 0-100
1.3.6.1.4.1.89.59.6.7.1.14ColumnrlPolicyDropProfileRedProbDp2read-writecurrentWRED probability for Drop Precedence 2.
1.3.6.1.4.1.89.59.6.7.1.15ColumnrlPolicyDropProfileRedQweightread-writecurrentadditional parameter for the WRED algorithem supporting the Queue weight exponentail factor
1.3.6.1.4.1.89.59.6.7.1.16ColumnrlPolicyDropProfileStatusread-writecurrentStatus of this entry.
1.3.6.1.4.1.89.59.6.8TablerlPolicyVlanConfigurationTablenot-accessiblecurrentThis table enables the network administrator to fine-tune the rate limit given to each vlan. The values in this table will thus override those of the rlQosIfPo…
1.3.6.1.4.1.89.59.6.8.1RowrlPolicyVlanCfgEntrynot-accessiblecurrentConfiguration parameters for each vlan.
1.3.6.1.4.1.89.59.6.8.1.1ColumnrlPolicyVlanCfgVlanIdread-onlycurrentInterface index.
1.3.6.1.4.1.89.59.6.8.1.2ColumnrlPolicyVlanCfgPortRateLimitStatusread-writecurrentIf there is Rate Limit on the vlan
1.3.6.1.4.1.89.59.6.8.1.3ColumnrlPolicyVlanCfgCirPortRateLimitread-writecurrentThe CIR for the port Rate limit. N/A when the Rate limit is disabled UNITS bps bits per second
1.3.6.1.4.1.89.59.6.8.1.4ColumnrlPolicyVlanCfgCbsPortRateLimitread-writecurrentThe CBS for the port Rate Limit. N/A when the Rate Limit is disabled. UNITS bytes
1.3.6.1.4.1.89.59.6.8.1.5ColumnrlPolicyVlanCfgStatusread-writecurrentStatus of this entry.
1.3.6.1.4.1.89.59.7NoderlPolicyDiffServ
1.3.6.1.4.1.89.59.7.1NoderlPolicyDiffServPlatDependParams
1.3.6.1.4.1.89.59.7.1.1ScalarrlDiffservModeSupportedread-onlyobsoleteIndicates whether Diffserv mode is supported on the platform.
1.3.6.1.4.1.89.59.7.2ScalarrlDiffservModeEnabledread-writecurrentIndicates whether Diffserv mode is currently enabled.
1.3.6.1.4.1.89.59.7.3TablerlDiffservBoundaryTablenot-accessiblecurrentIndicates whether a port is considered a boundary or an interior node of the Diffserv domain
1.3.6.1.4.1.89.59.7.3.1RowrlDiffservBoundaryEntrynot-accessiblecurrentEach boundary/interior ports table entry consists of the following parameters
1.3.6.1.4.1.89.59.7.3.1.1ColumnrlDiffservBoundaryIfIndexread-onlycurrentThe Interface index whose type is being defined
1.3.6.1.4.1.89.59.7.3.1.2ColumnrlDiffservBoundaryPortTyperead-writecurrentThe boundary status of the port.
1.3.6.1.4.1.89.59.7.3.1.3ColumnrlDiffservBoundaryStatusread-writecurrentStatus of this entry.
1.3.6.1.4.1.89.59.9NoderlPolicyGlobalParams
1.3.6.1.4.1.89.59.9.1ScalarrlPolicyGlobalOperationEnabledread-writecurrentIndicates whether Policy is currently enabled.
1.3.6.1.4.1.89.59.9.2ScalarrlPolicyGlobalDefaultForwardingread-writecurrentIndicates whether or not the unmach traffic is forwarded or blocked.
1.3.6.1.4.1.89.59.9.3ScalarrlPolicyGlobalAdminTrapfrequencyread-writecurrentdefine the the min number of seconds between successive traps. 0 means no traps will be sent, uints in Sec
1.3.6.1.4.1.89.59.9.4ScalarrlPolicyGlobalOperTrapElapsedTimeread-onlycurrentshow the time out elaps from the last trap sent uints in Sec.
1.3.6.1.4.1.89.59.9.5ScalarrlPolicyGlobalQosModeread-writedeprecatedV750 DEPRECATED - replaced with rlPolicyGlobalQosMode field in rlPolicyQosModeGlobalCfg table. user can set the system to operate either in the Basic mode or i…
1.3.6.1.4.1.89.59.9.6ScalarrlPolicyGlobalTrustModeread-writedeprecatedV750 DEPRECATED - replaced with rlPolicyGlobalTrustMode field in rlPolicyQosModeGlobalCfg table. Global Trust state. the value refered to Basic mode and specif…
1.3.6.1.4.1.89.59.9.7ScalarrlPolicyGlobalDeviceQosOperationTypesread-onlycurrentIndicates if the system support basic or advanced mode or Both basic and Advanced
1.3.6.1.4.1.89.59.9.8ScalarrlPolicyGlobalDscpMutationSupportedread-onlycurrentmutation over the ingress packet dscp field supported for the device.
1.3.6.1.4.1.89.59.9.9ScalarrlPolicyGlobalClassifyIpPrecedenceSupportedread-onlyobsoleteIndicates if the system support classification according ip precedence most significant 3 bits in the TOS byte
1.3.6.1.4.1.89.59.9.10ScalarrlPolicyGlobalDeviceShapingTypeSupportedread-onlycurrentIndicates the shaper shaper type supported for the device
1.3.6.1.4.1.89.59.9.11ScalarrlPolicyGlobalDscpRemarkingSupportedread-onlycurrentIndicates if dscp remarking supported for the device
1.3.6.1.4.1.89.59.9.12ScalarrlPolicyGlobalqueueSchedulerPerDeviceOrPortread-onlyobsoleteindicates if the system support scheduling configuration per port or per device. device (1 ) or port (2)
1.3.6.1.4.1.89.59.10NoderlPolicyMapping
1.3.6.1.4.1.89.59.10.1TablerlPolicyDscpServiceClassTablenot-accessiblecurrentThis table specifies The DSCP to ServiceClass map table
1.3.6.1.4.1.89.59.10.1.1RowrlPolicyDscpServiceClassEntrynot-accessiblecurrentEach entry in this table describes The ServiceClass assigned to a Dscp value. The index is DSCP represent by rlPolicyDscpIndex
1.3.6.1.4.1.89.59.10.1.1.1ColumnrlPolicyDscpIndexread-onlycurrentDSCP value.
1.3.6.1.4.1.89.59.10.1.1.2ColumnrlPolicyServiceClassValueread-writecurrentServiceClass value.
1.3.6.1.4.1.89.59.10.1.1.3ColumnrlPolicyDscpServiceClassStatusread-writecurrentThe status of a table entry. It is used to delete/Add an entry from this table.
1.3.6.1.4.1.89.59.10.2TablerlPolicyTcpUdpPortServiceClassTablenot-accessibleobsoleteThis table specifies TCP/UDP Port to ServiceClass map table
1.3.6.1.4.1.89.59.10.2.1RowrlPolicyTcpUdpPortServiceClassEntrynot-accessibleobsoleteEach entry in this table describes The ServiceClass Value. The index is TCP/UDP port represent by rlPolicyTcpUdpPort
1.3.6.1.4.1.89.59.10.2.1.1ColumnrlPolicyProtocolTyperead-onlyobsoleteTCP/UDP port type.
1.3.6.1.4.1.89.59.10.2.1.2ColumnrlPolicyTcpUdpPortread-onlyobsoleteTCP/UDP port number.
1.3.6.1.4.1.89.59.10.2.1.3ColumnrlPolicyMappedServiceClassread-writeobsoleteServiceClass value.
1.3.6.1.4.1.89.59.10.2.1.4ColumnrlPolicyTcpUdpPortServiceClassStatusread-writeobsoleteThe status of a table entry. It is used to delete/Add an entry from this table.
1.3.6.1.4.1.89.59.10.3TablerlPolicyDscpRemarkTablenot-accessiblecurrentThis table specifies The DSCP Remark table
1.3.6.1.4.1.89.59.10.3.1RowrlPolicyDscpRemarkEntrynot-accessiblecurrentEach entry in this table describes the new DSCP for the packet. The index is Old DSCP represent by rlPolicyOldDscp
1.3.6.1.4.1.89.59.10.3.1.1ColumnrlPolicyRmOldDscpread-onlycurrentOld DSCP.
1.3.6.1.4.1.89.59.10.3.1.2ColumnrlPolicyRmNewDscpread-writecurrentNew DSCP.
1.3.6.1.4.1.89.59.10.3.1.3ColumnrlPolicyDscpRemarkStatusread-writecurrentThe status of a table entry. It is used to delete/Add an entry from this table.
1.3.6.1.4.1.89.59.10.4TablerlPolicyDscpMutationTablenot-accessiblecurrentThis table specifies The DSCP Mutation table
1.3.6.1.4.1.89.59.10.4.1RowrlPolicyDscpMutationEntrynot-accessiblecurrentEach entry in this table describes the new DSCP for the packet. The index is Old DSCP represent by rlPolicyOldDscp
1.3.6.1.4.1.89.59.10.4.1.1ColumnrlPolicyOldDscpread-onlycurrentOld DSCP.
1.3.6.1.4.1.89.59.10.4.1.2ColumnrlPolicyNewDscpread-writecurrentNew DSCP.
1.3.6.1.4.1.89.59.10.4.1.3ColumnrlPolicyDscpMutationStatusread-writecurrentThe status of a table entry. It is used to delete/Add an entry from this table.
1.3.6.1.4.1.89.59.10.5TablerlPolicyTrustModeTablenot-accessiblecurrentThis table specifies the port state for the trusted basic mode
1.3.6.1.4.1.89.59.10.5.1RowrlPolicyTrustModeEntrynot-accessiblecurrentdescribes the ports status that belongs to the global trusted state
1.3.6.1.4.1.89.59.10.5.1.1ColumnrlPolicyTrustModePortNumberread-onlycurrentphisical port number .
1.3.6.1.4.1.89.59.10.5.1.2ColumnrlPolicyTrustModePortStateread-writecurrentthe port state for the trusted mode. the port can be enabled or disabled for the basic trust mode
1.3.6.1.4.1.89.59.10.6TablerlPolicyDscpVptTablenot-accessiblecurrentThis table specifies The DSCP to VPT map table
1.3.6.1.4.1.89.59.10.6.1RowrlPolicyDscpVptEntrynot-accessiblecurrentEach entry in this table describes The VPT assigned to a Dscp value. The index is DSCP represent by rlPolicyDscpValue.
1.3.6.1.4.1.89.59.10.6.1.1ColumnrlPolicyDscpValueread-onlycurrentDSCP value.
1.3.6.1.4.1.89.59.10.6.1.2ColumnrlPolicyVptValueread-writecurrentVPT value.
1.3.6.1.4.1.89.59.10.6.1.3ColumnrlPolicyDscpVptStatusread-writecurrentThe status of a table entry. It is used to delete/Add an entry from this table.
1.3.6.1.4.1.89.59.10.7TablerlPolicyDscpToDpTablenot-accessiblecurrentThis table specifies The DSCP To Dp table
1.3.6.1.4.1.89.59.10.7.1RowrlPolicyDscpToDpEntrynot-accessiblecurrentEach entry in this table describes the new DP for the packet. The index is DSCP represent by rlPolicyDscp
1.3.6.1.4.1.89.59.10.7.1.1ColumnrlPolicyDscpread-onlycurrentPacket DSCP.
1.3.6.1.4.1.89.59.10.7.1.2ColumnrlPolicyDpread-writecurrentNew DP.
1.3.6.1.4.1.89.59.10.7.1.3ColumnrlPolicyDscpToDpStatusread-writecurrentThe status of a table entry. It is used to delete/Add an entry from this table.
1.3.6.1.4.1.89.59.11TablerlPolicyDefaultForwardingTablenot-accessiblecurrentThis table specifies The default forwarding values : permit or deny for list of specific ports , vlans
1.3.6.1.4.1.89.59.11.1RowrlPolicyDefaultForwardingEntrynot-accessiblecurrentSince the table is search to find match according to first match Entries with specific protocol should be set before entries for entire layer.
1.3.6.1.4.1.89.59.11.1.1ColumnrlPolicyDefaultForwardingIndexread-onlycurrentDefault Forwarding Index.
1.3.6.1.4.1.89.59.11.1.2ColumnrlPolicyDefaultForwardingPortListread-writecurrentDefault Forwarding Port List.
1.3.6.1.4.1.89.59.11.1.3ColumnrlPolicyDefaultForwardingVlanId1To1024read-writecurrentDefault Forwarding VlanId List 1.
1.3.6.1.4.1.89.59.11.1.4ColumnrlPolicyDefaultForwardingVlanId1025To2048read-writecurrentDefault Forwarding VlanId List 2.
1.3.6.1.4.1.89.59.11.1.5ColumnrlPolicyDefaultForwardingVlanId2049To3072read-writecurrentDefault Forwarding VlanId List 3.
1.3.6.1.4.1.89.59.11.1.6ColumnrlPolicyDefaultForwardingVlanId3073To4096read-writecurrentDefault Forwarding VlanId List 4.
1.3.6.1.4.1.89.59.11.1.7ColumnrlPolicyDefaultForwardingLayerread-writecurrentDefault Forwarding Action specify layer l2 l3 l3-ipv6
1.3.6.1.4.1.89.59.11.1.8ColumnrlPolicyDefaultForwardingActionread-writecurrentDefault Forwarding Action specify permit or deny
1.3.6.1.4.1.89.59.11.1.9ColumnrlPolicyDefaultForwardingStatusread-writecurrentThe status of a table entry. It is used to delete/Add an entry from this table.
1.3.6.1.4.1.89.59.11.1.10ColumnrlPolicyDefaultForwardingProtocolread-writecurrentThe protocol type to be applied with the default action.
1.3.6.1.4.1.89.59.12NoderlPolicyStatistics
1.3.6.1.4.1.89.59.12.1TablerlPolicyPortPolicyStatisticsTablenot-accessiblecurrentThis table specifies statistics counter for policies with specific actions
1.3.6.1.4.1.89.59.12.1.1RowrlPolicyPortPolicyStatisticsEntrynot-accessiblecurrentEach entry in this table describes counter per port. The index is port represent by rlIfIndex. In each entry represents counter, it's type , it's size and whet…
1.3.6.1.4.1.89.59.12.1.1.1ColumnrlPolicyPortPolicyStatisticsIfIndexread-writecurrentInterface index.
1.3.6.1.4.1.89.59.12.1.1.2ColumnrlPolicyPortPolicyStatisticsCntrTyperead-onlycurrentCounter type.
1.3.6.1.4.1.89.59.12.1.1.3ColumnrlPolicyPolicyStatisticsCntrSizeread-onlycurrentCounter size in bits.
1.3.6.1.4.1.89.59.12.1.1.4ColumnrlPolicyPolicyStatisticsEnableCountingread-writecurrentIndication whether the counter is enabled.
1.3.6.1.4.1.89.59.12.1.1.5ColumnrlPolicyPolicyStatisticsCounterValueread-onlycurrentCounter value.
1.3.6.1.4.1.89.59.12.2TablerlPolicyOutQueueStatisticsTablenot-accessiblecurrentEach entry in this table describes counter per any permutation of Port/VLAN/Queue/Drop Precedence . Each of the above can a group off 'All'. The index is port …
1.3.6.1.4.1.89.59.12.2.1RowrlPolicyOutQueueStatisticsEntrynot-accessiblecurrentEach entry includes port, vlan, queue, drop precedence and counter value.
1.3.6.1.4.1.89.59.12.2.1.1ColumnrlPolicyOutQueueStatisticsCountrIDread-onlycurrentCounter id, the key of the table.
1.3.6.1.4.1.89.59.12.2.1.2ColumnrlPolicyOutQueueStatisticsIfIndexListread-writecurrentPort for which the flow is counted.
1.3.6.1.4.1.89.59.12.2.1.3ColumnrlPolicyOutQueueStatisticsPortAllread-writecurrentIndication for whether the port is configured as range of all the ports
1.3.6.1.4.1.89.59.12.2.1.4ColumnrlPolicyOutQueueStatisticsVlanread-writecurrentVLAN for which the flow is counted.
1.3.6.1.4.1.89.59.12.2.1.5ColumnrlPolicyOutQueueStatisticsVlanAllread-writecurrentIndication for whether the Vlan is configured as range of all the Vlans
1.3.6.1.4.1.89.59.12.2.1.6ColumnrlPolicyOutQueueStatisticsQueueread-writecurrentQueue for which the flow is counted.
1.3.6.1.4.1.89.59.12.2.1.7ColumnrlPolicyOutQueueStatisticsQueueAllread-writecurrentIndication for whether the Queue is configured as range of all the Queues
1.3.6.1.4.1.89.59.12.2.1.8ColumnrlPolicyOutQueueStatisticsDPread-writecurrentDrop Precedence for which the flow is counted.
1.3.6.1.4.1.89.59.12.2.1.9ColumnrlPolicyOutQueueStatisticsDPAllread-writecurrentIndication for whether the DP is configured as range of all the DPs
1.3.6.1.4.1.89.59.12.2.1.10ColumnrlPolicyOutQueueStatisticsCounterTailDropValueread-onlycurrentThe counter for tail dropped value.
1.3.6.1.4.1.89.59.12.2.1.11ColumnrlPolicyOutQueueStatisticsCounterAllValueread-onlycurrentThe counter for all traffic value.
1.3.6.1.4.1.89.59.12.2.1.12ColumnrlPolicyOutQueueStatisticsCntrNumOfBitsread-onlycurrentCounter size in bits for the counter.
1.3.6.1.4.1.89.59.12.2.1.13ColumnrlPolicyOutQueueStatisticsStatusread-writecurrentThe status of a table entry. It is used to delete an entry from this table.
1.3.6.1.4.1.89.59.12.3TablerlPolicyGlobalStatisticsCntrsTablenot-accessiblecurrentThis table specifies statistics global counters for specific rules for all ports that they are connected to
1.3.6.1.4.1.89.59.12.3.1RowrlPolicyGlobalStatisticsCntrsEntrynot-accessiblecurrentEach entry represents global counter.
1.3.6.1.4.1.89.59.12.3.1.1ColumnrlPolicyGlobalStatisticsCntrsTyperead-onlycurrentCounter type.
1.3.6.1.4.1.89.59.12.3.1.2ColumnrlPolicyGlobalStatisticsCntrsNumOfBitsread-onlycurrentCounter size in bits.
1.3.6.1.4.1.89.59.12.3.1.3ColumnrlPolicyGlobalStatisticsCntrsCounterValueread-onlycurrentCounter value.
1.3.6.1.4.1.89.59.12.3.1.4ColumnrlPolicyGlobalStatisticsStatusread-writecurrentThe status of a table entry. It is used to delete an entry from this table.
1.3.6.1.4.1.89.59.12.4ScalarrlPolicyClearCountersread-writecurrentThis scalar indicates to clear all the counters.
1.3.6.1.4.1.89.59.13NoderlPolicyClassifierUtilization
1.3.6.1.4.1.89.59.13.1TablerlPolicyClassifierUtilizationTablenot-accessiblecurrentA table containing Classifier utilization information. Each row represents objects for a particular Unit present in this system.
1.3.6.1.4.1.89.59.13.1.1RowrlPolicyClassifierUtilizationEntrynot-accessiblecurrentA Single entry containing Classifier utilization information.
1.3.6.1.4.1.89.59.13.1.1.1ColumnrlPolicyClassifierUtilizationUnitIdnot-accessiblecurrentThe Unit ID of this Classifier. must be unique per entry. This is an index into the table.
1.3.6.1.4.1.89.59.13.1.1.2ColumnrlPolicyClassifierUtilizationPercentread-onlycurrentThe classifier utilization percentage.
1.3.6.1.4.1.89.59.13.1.1.3ColumnrlPolicyClassifierUtilizationRulesNumberread-onlycurrentThe classifier utilization number of used rules, in short rules resolution.
1.3.6.1.4.1.89.59.14ScalarrlPolicyIsTCAvailableread-onlycurrentThis scalar indicates the number of currently reserved amount of traffic conditioners.
1.3.6.1.4.1.89.59.15ScalarrlPolicyCPUSafeGuardEnableread-writecurrentThis scalar enables/disables CPU Safeguard.
1.3.6.1.4.1.89.59.16TablerlPolicyQosModeGlobalCfgTablenot-accessiblecurrentThis table responsible to set the global qos mode configuration: qos mode, qos trust mode, and if port are trusted by default in qos advanced mode.
1.3.6.1.4.1.89.59.16.1RowrlPolicyQosModeGlobalCfgEntrynot-accessiblecurrentThis table responsible to set the global qos mode configuration: qos mode, qos trust mode, and if port are trusted by default in qos advanced mode. Current imp…
1.3.6.1.4.1.89.59.16.1.1ColumnrlPolicyGlobalIndexnot-accessiblecurrentEntry index - currenly only one entry can exist, indexes hard coded with value '1'.
1.3.6.1.4.1.89.59.16.1.2ColumnrlPolicyGlobalQoSModeread-writecurrentThis field replaces deprecated scalar rlPolicyCliQosMode. Defines the global qos operation mode: disable, basic or advnaced.
1.3.6.1.4.1.89.59.16.1.3ColumnrlPolicyBasicGlobalTrustModeread-writecurrentThis field replaces deprecated scalar rlPolicyCliBasicModeCfg. Defines the global qos trust operation mode when qos mode is basic.
1.3.6.1.4.1.89.59.16.1.4ColumnrlPolicyAdvcGlobalTrustModeread-writecurrentThis field replaces deprecated scalar rlPolicyCliBasicModeCfg. Defines the global qos trust operation mode when qos mode is advanced.
1.3.6.1.4.1.89.59.16.1.5ColumnrlPolicyPortTrustAdvancedModeread-writecurrentThis field specified whether ports are set to trused or not-trusted by default when switching to qos advanced mode.
1.3.6.1.4.1.89.59.16.1.6ColumnrlPolicyDscpMutationEnableread-writecurrentThis field indicates if dscp to dscp mutation mode is enable. It can be set to true in the following terms: 1.rlQosGlobalTrustMode is in {dscp, vpt-dscp} ( rlQ…
1.3.6.1.4.1.89.59.16.1.7ColumnrlPolicyModeGlobalCfgStatusread-writecurrentThis status of entry action. In current implementation only one entry exist, therefor only status = active is acceptable.
Type Definitions
NameSyntaxStatusDescription
InterfaceTypeINTEGER { vlan(1), port(2) }currentInterface type.
L4ProtTypeINTEGER { tcp(1), udp(2) }currentspecify to Layer 4 protocol type for which the port number will refer at the rlPolicyTcpUdpPortDscpTable.
RlPolicyClassifierDiffservIfTypeINTEGER { normal(1), allBoundaryPorts(2), allInteriorPorts(3) }currentSpecifies port's type to which a classifier is applied. It is only used for the DiffServ mode. For the non-DiffServ mode the normal value may be used.
RlPolicyGroupTypeINTEGER { bridged(1), routedIp(2), routedIpx(3), notUsed(4) }currentSpecifies one of 3 classifier types for which offset bytes can be specified. For Ip and Ipx, the offsets indicated are relative to the beginning of the L3 data (IP options field is skipped). For the Bridged type, the of…
RlPolicyMarkVlanActionINTEGER { noMark(1), mark(2), markNestedVlan(3) }currentSpecifies the mark vlan action type in the class map table. 1 - noMark - No vlan marking 2 - mark - mark vlan tagged. 3 - markNestedVlan - add vlan tag to the packet.
RlPolicyQosModeINTEGER { disable(1), basic(2), advanced(3) }currentThe user can set the system to operate either in the Basic mode or in the Advanced mode. The setting of the mode applies to all ports in the system. configuring the system to work in the advanced mode, all setting for t…
RlPolicyRedirectActionINTEGER { disabled(1), trap(2), redirectToInterface(3), redirectToAllPorts(4), mirror(5), analyzerPort(6), loopback(7), redirectToPortGroup(8), mirrorAndRedirectToInterface(9), mirrorAndRedirectToInterfacesGroup(10) }currentSpecifies the packet redirection options. Redirection is applied only on permitted packets. 1 - disabled - no redirect 2 - trap - trap to local_host (CPU) 3 - redirectToInterface - redirect to a output interface (port, …
RlPolicyRulesActionDropTypeINTEGER { hardDrop(1), softDrop(2) }currentThe Action Drop Type.
RlPolicyTimeBasedAclWeekPeriodicListBITS { monday(0), tuesday(1), wednesday(2), thursday(3), friday(4), saturday(5), sunday(6) }currentBitmap that includes days of week. Each bit in the bitmap associated with corresponding day of the week.
RlPolicyTrustTypesINTEGER { cos(1), dscp(2), cos-dscp(3) }currentConfigure the port trust state cos - Classifies ingress packets with the packet CoS values. For untagged packets, the port default CoS is used. dscp - Classifies ingress packets with the packet DSCP values. For non-ip t…
StatisticsClearActionTypeINTEGER { noaction(1), action(2) }currentClear action, value for clear scalar.
StatisticsCntrNumOfBitsTypeINTEGER { uint32(32), uint48(48), uint64(64) }currentThe counter can be of different sizes - 32 bit, 48 bit, 64 bit. Maximum is 64.
StatisticsCntrTypeINTEGER { statisticsCntrTypeSetDSCP(1), statisticsCntrTypeDeny(2) }currentThe counter can be of different types, depends on actions adhered to rules that the counter is working on.
StatisticsDPTypeINTEGER { green(1), yellow(2), red(3) }currentDrop preceedence type.
MIB Viewer