Dell-SNMP-MIB
70 objects
Private MIB module for SNMP support in Dell devices.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.89.98 | IdentityrlSNMP | Private MIB module for SNMP support in Dell devices. | ||
| 1.3.6.1.4.1.89.98.1 | NoderlSNMPv3 | |||
| 1.3.6.1.4.1.89.98.1.1 | ScalarrlTargetParamsTestingLevel | read-write | current | The level of the tests done when configuring an entry in the snmpTargetParamsTable. |
| 1.3.6.1.4.1.89.98.1.2 | ScalarrlNotifyFilterTestingLevel | read-write | current | The level of the tests done when configuring an entry in the snmpNotifyFilterTable. |
| 1.3.6.1.4.1.89.98.1.3 | ScalarrlSnmpEngineID | read-write | current | A variable for setting the router's local engineID value. Setting this variable will effect the value of snmpEngineID. Setting this variable to the value '00 0… |
| 1.3.6.1.4.1.89.98.1.4 | TablerlSNMPv3IpAddrToIndexTable | not-accessible | current | This table maps ip addresses to indices. The output index is used as a component in some SNMPv3 tables fields (for example: snmpTargetAddrName). Ipv4 addresses… |
| 1.3.6.1.4.1.89.98.1.4.1 | RowrlSNMPv3IpAddrToIndexEntry | not-accessible | current | The row definition for this table. |
| 1.3.6.1.4.1.89.98.1.4.1.1 | ColumnrlSNMPv3IpAddrToIndexAddrType | not-accessible | current | Type of NMS IP address. |
| 1.3.6.1.4.1.89.98.1.4.1.2 | ColumnrlSNMPv3IpAddrToIndexAddr | not-accessible | current | NMS IP address. |
| 1.3.6.1.4.1.89.98.1.4.1.3 | ColumnrlSNMPv3IpAddrToIndexMappedIndex | read-only | current | The index mapped for this row ip address. |
| 1.3.6.1.4.1.89.98.1.5 | TablerlTargetAddrExtTable | not-accessible | current | This table extends rlTargetAddrExtEntry. |
| 1.3.6.1.4.1.89.98.1.5.1 | RowrlTargetAddrExtEntry | not-accessible | current | The row definition for this table. |
| 1.3.6.1.4.1.89.98.1.5.1.1 | ColumnrlTargetAddrMagicUsedInIndex | read-create | current | Setting this field to a 4 octets length value means that ip mapping (using rlSNMPv3IpAddrToIndexTable) is used for this row. If such a mapping is not used, a 0… |
| 1.3.6.1.4.1.89.98.1.6 | TablerlInet2EngineIdTable | not-accessible | current | This table maps inet addresses to SNMPv3 engine identifiers. |
| 1.3.6.1.4.1.89.98.1.6.1 | RowrlInet2EngineIdEntry | not-accessible | current | The row definition for this table. |
| 1.3.6.1.4.1.89.98.1.6.1.1 | ColumnrlInet2EngineIdAddressType | not-accessible | current | Inet address type of the mapped inet address. |
| 1.3.6.1.4.1.89.98.1.6.1.2 | ColumnrlInet2EngineIdAddress | not-accessible | current | Mapped inet address. |
| 1.3.6.1.4.1.89.98.1.6.1.3 | ColumnrlInet2EngineIdEngineId | read-create | current | The SNMPv3 engine id to which the address denoted by rlInet2EngineIdAddressType and rlInet2EngineIdAddress is mapped. |
| 1.3.6.1.4.1.89.98.1.6.1.4 | ColumnrlInet2EngineIdStatus | read-create | current | The management control for this table. |
| 1.3.6.1.4.1.89.98.1.8 | TablerlUsmUserExtTable | not-accessible | current | This table extends usmUserEntry. |
| 1.3.6.1.4.1.89.98.1.8.1 | RowrlUsmUserExtEntry | not-accessible | current | The row definition for this table. |
| 1.3.6.1.4.1.89.98.1.8.1.1 | ColumnrlUsmUserAuthPassword | read-create | current | Authentication password. Setting the field to a non zero-length value will convert the given password to a localized authentication key, appropriate to the cor… |
| 1.3.6.1.4.1.89.98.1.8.1.2 | ColumnrlUsmUserPrivPassword | read-create | current | Privacy password. Setting the field to a non zero-length value will convert the given password to a localized privacy key, appropriate to the corresponding usm… |
| 1.3.6.1.4.1.89.98.2 | NoderlSNMPDomains | |||
| 1.3.6.1.4.1.89.98.2.1 | IdentityrlSnmpUDPMridDomain | current | The SNMPv2 over UDP transport domain, used when Multi-Instance Router is supported (more than one MIR instance exist). The corresponding transport address is o… | |
| 1.3.6.1.4.1.89.98.2.2 | IdentityrlSnmpUdpIpv6MridDomain | current | The SNMPv2 over UDP over IPv6 transport domain, used when Multi-Instance Router is supported (more than one MIR instance exist). The corresponding transport ad… | |
| 1.3.6.1.4.1.89.98.2.3 | IdentityrlSnmpUdpIpv6zMridDomain | current | The SNMPv2 over UDP over IPv6 transport domain, used when Multi-Instance Router is supported (more than one MIR instance exist). The corresponding transport ad… | |
| 1.3.6.1.4.1.89.98.3 | TablerlSnmpRequestMridTable | not-accessible | current | A table for determining the Mrid for the current SNMP request. |
| 1.3.6.1.4.1.89.98.3.1 | RowrlSnmpRequestMridEntry | not-accessible | current | The row definition for this table. |
| 1.3.6.1.4.1.89.98.3.1.1 | ColumnrlSnmpRequestManagedMrid | read-only | current | The router instance the NMS wants to manage in the current SNMP request. The value of this object, when attaching a variable instance of the rlSnmpRequestManag… |
| 1.3.6.1.4.1.89.98.3.1.2 | ColumnrlSnmpRequestMridStatus | read-write | current | The status of this entry. |
| 1.3.6.1.4.1.89.98.4 | ScalarrlSNMPenable | read-write | current | Enables or disables SNMP. |
| 1.3.6.1.4.1.89.98.5 | TablerndCommunityInetTable | not-accessible | current | The community table of the agent |
| 1.3.6.1.4.1.89.98.5.1 | RowrndCommunityInetEntry | not-accessible | current | The row definition for this table. |
| 1.3.6.1.4.1.89.98.5.1.1 | ColumnrndCommunityInetMngStationAddrType | not-accessible | current | Address type of the management station that will be allowed to communicate with the agent IP address |
| 1.3.6.1.4.1.89.98.5.1.2 | ColumnrndCommunityInetMngStationAddr | not-accessible | current | Address of the management station that will be allowed to communicate with the agent IP address |
| 1.3.6.1.4.1.89.98.5.1.3 | ColumnrndCommunityInetString | not-accessible | current | The community string with which the management station will communicate with the agent |
| 1.3.6.1.4.1.89.98.5.1.4 | ColumnrndCommunityInetAccess | read-create | current | The allowed access to this management station |
| 1.3.6.1.4.1.89.98.5.1.5 | ColumnrndCommunityInetTrapsEnable | read-create | current | Should the agent send traps to the management station, and what version is required |
| 1.3.6.1.4.1.89.98.5.1.6 | ColumnrndCommunityInetStatus | read-create | current | The status of this entry. If the status is invalid the community entry will be deleted |
| 1.3.6.1.4.1.89.98.5.1.7 | ColumnrndCommunityInetPortSecurity | read-create | current | If enabled the device will only receive SNMP messages from the port, through which this NMS is reachable from the device. |
| 1.3.6.1.4.1.89.98.5.1.8 | ColumnrndCommunityInetOwner | read-create | current | The owner of this community |
| 1.3.6.1.4.1.89.98.5.1.9 | ColumnrndCommunityInetTrapDestPort | read-create | current | The transport protocol (usually UDP) port to which traps to the management station represebted by this entry will be sent. The default is the well-known IANA a… |
| 1.3.6.1.4.1.89.98.5.1.10 | ColumnrndCommunityInetAltAddrType | read-create | current | For testing purposes |
| 1.3.6.1.4.1.89.98.5.1.11 | ColumnrndCommunityInetAltAddr | read-create | current | For testing purposes |
| 1.3.6.1.4.1.89.98.6 | TablerlMridInetTable | not-accessible | current | The MRID related configurations table of the agent |
| 1.3.6.1.4.1.89.98.6.1 | RowrlMridInetEntry | not-accessible | current | The row definition for this table. |
| 1.3.6.1.4.1.89.98.6.1.1 | ColumnrlMridInetConnection | read-write | current | The router instance connecting the NMS who accessed the agent through the community table entry corresponding to the keys of this entry. |
| 1.3.6.1.4.1.89.98.6.1.2 | ColumnrlInetManagedMrid | read-write | current | The router instance currently managed by the NMS who accessed the agent through the community table entry corresponding to the keys of this entry |
| 1.3.6.1.4.1.89.98.7 | NoderlEvents | |||
| 1.3.6.1.4.1.89.98.7.1 | ScalarrlEventsPollerId | read-only | current | The rlEventsPollerId is the 1st key in all the rlEvents tables. Each poller must first GET from this object his Id. The agent will ensure uniqueness. |
| 1.3.6.1.4.1.89.98.7.2 | ScalarrlEventsDefaultPollingInterval | read-write | current | The default polling time. Will be used to detrermined whether the events configured by a poller in rlEventsTable can be destroyed, in absence of an entry for t… |
| 1.3.6.1.4.1.89.98.7.3 | ScalarrlEventsDeleteEvents | read-write | current | SETting a id of an active poller will cause all the rows of this poller in the rlEventsTable to be destroyed. This is equivalent to SETting rlEventsStatus of e… |
| 1.3.6.1.4.1.89.98.7.4 | TablerlEventsMaskTable | not-accessible | current | The table showing the events mask for each client. |
| 1.3.6.1.4.1.89.98.7.4.1 | RowrlEventsMaskEntry | not-accessible | current | The row definition for this table. |
| 1.3.6.1.4.1.89.98.7.4.1.1 | ColumnrlEventsMaskPollerId | not-accessible | current | The poller id whose events are shown in this table |
| 1.3.6.1.4.1.89.98.7.4.1.2 | ColumnrlEventsMaskMask | read-only | current | The semantics of the rlEventsMask is an array of timestamps (each 4 octets containing one time stamp). Each timestamp is in TimeTicks units encoded in network … |
| 1.3.6.1.4.1.89.98.7.5 | TablerlEventsTable | not-accessible | current | The table relating the events recorded to the indices in the rlEventsMask. |
| 1.3.6.1.4.1.89.98.7.5.1 | RowrlEventsEntry | not-accessible | current | The row definition for this table. |
| 1.3.6.1.4.1.89.98.7.5.1.1 | ColumnrlEventsPoller | not-accessible | current | The poller id whose event definitions are shown in this table. |
| 1.3.6.1.4.1.89.98.7.5.1.2 | ColumnrlEventId | not-accessible | current | The event id of the polled event. This is the notification object identifier (in case of a SNMPV2 notification) or the translation to SNMPv2 notation of an SNM… |
| 1.3.6.1.4.1.89.98.7.5.1.3 | ColumnrlEventIndexInMask | read-only | current | Index in the rlEventsMaskMask of this poller id that has been allocated for this event by the device. |
| 1.3.6.1.4.1.89.98.7.5.1.4 | ColumnrlEventsStatus | read-create | current | RowStatus for this table. Note that the device may refuse for resource shortage reasons to honour a create request for this poller even if apparently there sti… |
| 1.3.6.1.4.1.89.98.7.6 | TablerlEventsPollingControlTable | not-accessible | current | The polling control table for a poller. Currently contain only the polling interval. |
| 1.3.6.1.4.1.89.98.7.6.1 | RowrlEventsPollingControlEntry | not-accessible | current | The row definition for this table. |
| 1.3.6.1.4.1.89.98.7.6.1.1 | ColumnrlEventsPollingControlPollerId | not-accessible | current | The poller id whose polling controls are shown in this table. |
| 1.3.6.1.4.1.89.98.7.6.1.2 | ColumnrlEventsPollingControlPollingInterval | read-create | current | The desired polling interval for this poller. If the device has determined that the poller has not polled the device for 3 times this polling interval it may d… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| RlSnmpUDPIpv6MridAddress | OCTET STRING (SIZE (20)) rlSnmpUdpIpv6zMridDomain OBJECT-IDENTITY STATUS current DESCRIPTION "The SNMPv2 over UDP over IPv6 transport domain, used when Multi-Instance Router is supported (more than one MIR instance exist). The corresponding transport address is of type RlSnmpUDPIpv6zMridAddress for scoped IPv6 addresses with a zone index." ::= { rlSNMPDomains 3 } | current | Represents the UDP address of NMS and the MRID through which it is connected in order to access the agent: octets contents encoding 1-16 IPv6 address network-byte order 17-18 UDP-port network-byte order 19-20 MRID netwo… |
| RlSnmpUDPIpv6zMridAddress | OCTET STRING (SIZE (24)) | current | Represents the UDP address of NMS (consisting of an IPv6 address, a zone index and a port number) and the MRID through which it is connected in order to access the agent: octets contents encoding 1-16 IPv6 address netwo… |
| RlSnmpUDPMridAddress | OCTET STRING (SIZE (8)) rlSnmpUdpIpv6MridDomain OBJECT-IDENTITY STATUS current DESCRIPTION "The SNMPv2 over UDP over IPv6 transport domain, used when Multi-Instance Router is supported (more than one MIR instance exist). The corresponding transport address is of type RlSnmpUDPIpv6MridAddress for global IPv6 addresses." ::= { rlSNMPDomains 2 } | current | Represents the UDP address of NMS and the MRID through which it is connected in order to access the agent: octets contents encoding 1-4 IP-address network-byte order 5-6 UDP-port network-byte order 7-8 MRID network-byte… |