MIB Viewer

Dell-VRTX-BRIDGEMIBOBJECTS-MIB

171 objects
This private MIB module defines bridge MIB objects private MIBs.
Imported Objects
BRIDGE-MIBBridgeId dot1dBasePort dot1dStpPort Timeout
Dell-VRTX-MIBrnd
IF-MIBifIndex InterfaceIndex
Q-BRIDGE-MIBPortList
RFC1155-SMICounter
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-SMICounter32 MODULE-IDENTITY OBJECT-TYPE TimeTicks
SNMPv2-TCDisplayString RowStatus TruthValue
OIDNameAccessStatusDescription
1.3.6.1.4.1.89.57IdentityrlpBridgeMIBObjectsThis private MIB module defines bridge MIB objects private MIBs.
1.3.6.1.4.1.89.57.1Noderldot1dPriority
1.3.6.1.4.1.89.57.1.1Scalarrldot1dPriorityMibVersionread-onlycurrentMIB's version, the current version is 1.
1.3.6.1.4.1.89.57.1.2Tablerldot1dPriorityPortGroupTablenot-accessiblecurrentA list of PortGroupNumber for each port.
1.3.6.1.4.1.89.57.1.2.1Rowrldot1dPriorityPortGroupEntrynot-accessiblecurrentAll ports belonging to a same group have the same User Priority to Traffic Class mapping.
1.3.6.1.4.1.89.57.1.2.1.1Columnrldot1dPriorityPortGroupNumberread-onlycurrentA group, that port belongs to. All ports belonging to a same group have the same User Priority to Traffic Class mapping.
1.3.6.1.4.1.89.57.2Noderldot1dStp
1.3.6.1.4.1.89.57.2.1Scalarrldot1dStpMibVersionread-onlycurrentMIB's version, the current version is 2.
1.3.6.1.4.1.89.57.2.2Scalarrldot1dStpTyperead-onlycurrentSpecifies whether the device supports Spanning Tree per device, or per group.
1.3.6.1.4.1.89.57.2.3Scalarrldot1dStpEnableread-writecurrentEnable / Disable spanning tree. When working in per vlan mode enable / disable STP per all vlans.
1.3.6.1.4.1.89.57.2.4Scalarrldot1dStpPortMustBelongToVlanread-writecurrentSpecifies whether a port must belong to a VLAN in order to participate in the STP.
1.3.6.1.4.1.89.57.2.5Scalarrldot1dStpExtendedPortNumberFormatread-writecurrentSpecifies whether the STP uses the extended port fnumber format.
1.3.6.1.4.1.89.57.2.6Tablerldot1dStpVlanTablenot-accessiblecurrentA table that contains vlan-specific information for the Spanning Tree Protocol.
1.3.6.1.4.1.89.57.2.6.1Rowrldot1dStpVlanEntrynot-accessiblecurrentA list of information maintained by every Vlan about the Spanning Tree Protocol state for that Vlan.
1.3.6.1.4.1.89.57.2.6.1.1Columnrldot1dStpVlanread-onlycurrentThe Vlan index.
1.3.6.1.4.1.89.57.2.6.1.2Columnrldot1dStpVlanEnableread-writecurrentSpecifies whether this vlan is STP enable or disable
1.3.6.1.4.1.89.57.2.6.1.3Columnrldot1dStpTimeSinceTopologyChangeread-onlycurrentThe time (in hundredths of a second) since the last time a topology change was detected by the bridge entity.
1.3.6.1.4.1.89.57.2.6.1.4Columnrldot1dStpTopChangesread-onlycurrentThe total number of topology changes detected by this bridge since the management entity was last reset or initialized.
1.3.6.1.4.1.89.57.2.6.1.5Columnrldot1dStpDesignatedRootread-onlycurrentThe bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Ide…
1.3.6.1.4.1.89.57.2.6.1.6Columnrldot1dStpRootCostread-onlycurrentThe cost of the path to the root as seen from this bridge.
1.3.6.1.4.1.89.57.2.6.1.7Columnrldot1dStpRootPortread-onlycurrentThe port number of the port which offers the lowest cost path from this bridge to the root bridge.
1.3.6.1.4.1.89.57.2.6.1.8Columnrldot1dStpMaxAgeread-onlycurrentThe maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is …
1.3.6.1.4.1.89.57.2.6.1.9Columnrldot1dStpHelloTimeread-onlycurrentThe amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become …
1.3.6.1.4.1.89.57.2.6.1.10Columnrldot1dStpHoldTimeread-onlycurrentThis time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredth…
1.3.6.1.4.1.89.57.2.6.1.11Columnrldot1dStpForwardDelayread-onlycurrentThis time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The…
1.3.6.1.4.1.89.57.2.7Tablerldot1dStpVlanPortTablenot-accessiblecurrentA table that contains pair <vlan, port> specific information for the Spanning Tree Protocol.
1.3.6.1.4.1.89.57.2.7.1Rowrldot1dStpVlanPortEntrynot-accessiblecurrentA list of information maintained by every pair <vlan, port> about the Spanning Tree Protocol state for that pair.
1.3.6.1.4.1.89.57.2.7.1.1Columnrldot1dStpVlanPortVlanread-onlycurrentThe Vlan number that the port belongs to, and for which this entry contains Spanning Tree Protocol management information.
1.3.6.1.4.1.89.57.2.7.1.2Columnrldot1dStpVlanPortPortread-onlycurrentThe port number of the port for which this entry contains Spanning Tree Protocol management information.
1.3.6.1.4.1.89.57.2.7.1.3Columnrldot1dStpVlanPortPriorityread-writecurrentThe value of the priority field which is contained in the more significant 4 bits of the most significant octet of the (2 octet long) Port ID. The other octet …
1.3.6.1.4.1.89.57.2.7.1.4Columnrldot1dStpVlanPortStateread-onlycurrentThe port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the …
1.3.6.1.4.1.89.57.2.7.1.5Columnrldot1dStpVlanPortEnableread-writecurrentThe enabled/disabled status of the port.
1.3.6.1.4.1.89.57.2.7.1.6Columnrldot1dStpVlanPortPathCostread-writecurrentThe contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value o…
1.3.6.1.4.1.89.57.2.7.1.7Columnrldot1dStpVlanPortDesignatedRootread-onlycurrentThe unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the po…
1.3.6.1.4.1.89.57.2.7.1.8Columnrldot1dStpVlanPortDesignatedCostread-onlycurrentThe path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.
1.3.6.1.4.1.89.57.2.7.1.9Columnrldot1dStpVlanPortDesignatedBridgeread-onlycurrentThe Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.
1.3.6.1.4.1.89.57.2.7.1.10Columnrldot1dStpVlanPortDesignatedPortread-onlycurrentThe Port Identifier of the port on the Designated Bridge for this port's segment.
1.3.6.1.4.1.89.57.2.7.1.11Columnrldot1dStpVlanPortForwardTransitionsread-onlycurrentThe number of times this port has transitioned from the Learning state to the Forwarding state.
1.3.6.1.4.1.89.57.2.8Noderldot1dStpTrapVariable
1.3.6.1.4.1.89.57.2.8.1Scalarrldot1dStpTrapVrblifIndexread-onlycurrentThe ifIndex of port which STP status was changed
1.3.6.1.4.1.89.57.2.8.2Scalarrldot1dStpTrapVrblVIDread-onlycurrentThe VID of VLAN to which the port belongs which STP status was changed
1.3.6.1.4.1.89.57.2.9Scalarrldot1dStpTypeAfterResetread-writecurrentNew mode of spaning tree supported by the device after the next reset.
1.3.6.1.4.1.89.57.2.10Scalarrldot1dStpMonitorTimeread-writecurrentFactor of hello-time during which a port is monotored to determine if it is stable.
1.3.6.1.4.1.89.57.2.11Scalarrldot1dStpBpduCountread-writecurrentThe number of bpdu that need to received for the link to be considered stable.
1.3.6.1.4.1.89.57.2.12Scalarrldot1dStpLastChangedread-onlycurrentThe last time any object in this table was changed by SNMP or other local management means.
1.3.6.1.4.1.89.57.2.13Tablerldot1dStpPortTablenot-accessiblecurrentA table that contains extended pair port specific information.
1.3.6.1.4.1.89.57.2.13.1Rowrldot1dStpPortEntrynot-accessiblecurrentA list of information maintained by every port about the Spanning Tree Protocol state for that port.
1.3.6.1.4.1.89.57.2.13.1.1Columnrldot1dStpPortPortread-onlycurrentThe port number of the port for which this entry contains Spanning Tree Protocol management information.
1.3.6.1.4.1.89.57.2.13.1.2Columnrldot1dStpPortDampEnableread-writecurrentSpecified if dampening is enabled on this port.
1.3.6.1.4.1.89.57.2.13.1.3Columnrldot1dStpPortDampStableread-onlycurrentSpecified if the port is stable.
1.3.6.1.4.1.89.57.2.13.1.4Columnrldot1dStpPortFilterBpduread-writecurrentSpecified if this port should filter bpdus when stp is disabled.
1.3.6.1.4.1.89.57.2.13.1.5Columnrldot1dStpPortBpduSentread-onlycurrentSpecified the number of bpdu sent from this port.
1.3.6.1.4.1.89.57.2.13.1.6Columnrldot1dStpPortBpduReceivedread-onlycurrentSpecified the number of bpdu received in this port.
1.3.6.1.4.1.89.57.2.13.1.7Columnrldot1dStpPortRoleread-onlycurrentSpecified the role of this this port.
1.3.6.1.4.1.89.57.2.13.1.8Columnrldot1dStpBpduTyperead-onlycurrentSpecified the type of BPDU transmitted by this port.
1.3.6.1.4.1.89.57.2.13.1.9Columnrldot1dStpPortRestrictedRoleread-writecurrentIf TRUE causes the Port not to be selected as Root Port for the CIST or any MSTI, even if it has the best spanning tree priority vector. Such a Port will be se…
1.3.6.1.4.1.89.57.2.13.1.10Columnrldot1dStpPortAutoEdgePortread-writecurrentIf TRUE causes the Port when become up, to enter the blocking state, and if during 3 seconds it doesn't receive a BPDU, it will enter the forwarding state.
1.3.6.1.4.1.89.57.2.13.1.11Columnrldot1dStpPortLoopbackread-onlycurrentSpecified loopback was detected on port. Usable for only a short period of time if stp loopback guard is enabled (since port enters into shutdown state).
1.3.6.1.4.1.89.57.2.13.1.12Columnrldot1dStpPortBpduOperStatusread-onlycurrentSpecified BPDU handling operative status for port.
1.3.6.1.4.1.89.57.2.14Scalarrldot1dStpPortsEnableread-onlycurrentEnable / Disable spanning tree on ports by default .
1.3.6.1.4.1.89.57.2.15Scalarrldot1dStpTaggedFloodingread-onlycurrentflooding can be done in tagged bpdu .
1.3.6.1.4.1.89.57.2.16Scalarrldot1dStpPortBelongToVlanDefaultread-onlycurrentThe default value of rldot1dStpPortMustBelongToVlan .
1.3.6.1.4.1.89.57.2.17Scalarrldot1dStpEnableByDefaultread-onlycurrentThe default value of rldot1dStpEnable .
1.3.6.1.4.1.89.57.2.18Scalarrldot1dStpPortToDefaultread-writecurrentTo order port/s to revert to default setings .
1.3.6.1.4.1.89.57.2.19Scalarrldot1dStpSupportedTyperead-onlycurrentThe type of stp supported by the device.
1.3.6.1.4.1.89.57.2.20Scalarrldot1dStpEdgeportSupportInStpread-onlycurrentIf EdgePort is supported in stpCompatible mode .
1.3.6.1.4.1.89.57.2.21Scalarrldot1dStpFilterBpduread-writecurrentSpecified if the device should filter BPDUs when STP is disabled.
1.3.6.1.4.1.89.57.2.22Scalarrldot1dStpFloodBpduMethodread-writecurrentSpecified flooding method: 1 - classic - untagged to all stp disabled ports 2 - bridging -normal bridging.
1.3.6.1.4.1.89.57.2.23Noderldot1dStpSeparatedBridges
1.3.6.1.4.1.89.57.2.23.1Tablerldot1dStpSeparatedBridgesTablenot-accessiblecurrentDefine if separated bridges feature is enabled for each interface.
1.3.6.1.4.1.89.57.2.23.1.1Rowrldot1dStpSeparatedBridgesEntrynot-accessiblecurrentDefines the contents of each line in the rlSeparatedBridgesTable table.
1.3.6.1.4.1.89.57.2.23.1.1.1Columnrldot1dStpSeparatedBridgesPortEnableread-writecurrentThis variable indicates whether the separated bridge feature is enabled on a specified ifIndex.
1.3.6.1.4.1.89.57.2.23.2Scalarrldot1dStpSeparatedBridgesEnableread-writecurrentEnable / Disable Separated Bridges Feature.
1.3.6.1.4.1.89.57.2.23.3Scalarrldot1dStpSeparatedBridgesAutoConfigread-writecurrentEnable / Disable Separated Bridges Automatic Configuration.
1.3.6.1.4.1.89.57.2.24Tablerldot1dStpPortBpduGuardTablenot-accessiblecurrentA table that contains for each port whether it is bpdu guard .
1.3.6.1.4.1.89.57.2.24.1Rowrldot1dStpPortBpduGuardEntrynot-accessiblecurrentA list of information maintained by every port whether it is bpdu guard.
1.3.6.1.4.1.89.57.2.24.1.1Columnrldot1dStpPortBpduGuardEnableread-writecurrentSpecified if bpdu guard is enabled on this port.
1.3.6.1.4.1.89.57.2.25Scalarrldot1dStpLoopbackGuardEnableread-writecurrentDefine if STP loopback guard feature is globally enabled.
1.3.6.1.4.1.89.57.2.26Tablerldot1dStpDisabledPortStateTablenot-accessiblecurrentDefine stp port state for each stp disabled interface. This is auxiliary MIB emulates stp enabled port behaviour in ASIC for stp disabled port. The MIB contain…
1.3.6.1.4.1.89.57.2.26.1Rowrldot1dStpDisabledPortStateEntrynot-accessiblecurrentDefines the contents of each line in the rldot1dStpDisabledPortStateTable table.
1.3.6.1.4.1.89.57.2.26.1.1Columnrldot1dStpDisabledPortStateread-writecurrentThe port's stp state as defined by external application . This state controls what action a port takes on reception of a frame.
1.3.6.1.4.1.89.57.3Noderldot1dExtBase
1.3.6.1.4.1.89.57.3.1Scalarrldot1dExtBaseMibVersionread-onlycurrentMIB's version, the current version is 1.
1.3.6.1.4.1.89.57.3.2Scalarrldot1dDeviceCapabilitiesread-onlycurrentIndicates the optional parts of private extension of IEEE 802.1D and 802.1Q that are implemented by this device and are manageable through this MIB. Capabiliti…
1.3.6.1.4.1.89.57.4Noderldot1wRStp
1.3.6.1.4.1.89.57.4.1Tablerldot1wRStpVlanEdgePortTablenot-accessiblecurrentA table that contains pair <vlan, port> specific information for the Rapid Spanning Tree Protocol.
1.3.6.1.4.1.89.57.4.1.1Rowrldot1wRStpVlanEdgePortEntrynot-accessiblecurrentA list of information maintained by every pair <vlan, port> about the RAPID Spanning Tree Protocol state for that pair.
1.3.6.1.4.1.89.57.4.1.1.1Columnrldot1wRStpVlanEdgePortVlanread-onlycurrentThe Vlan number that the port belongs to, and for which this entry contains Spanning Tree Protocol management information, If STP per device then only one valu…
1.3.6.1.4.1.89.57.4.1.1.2Columnrldot1wRStpVlanEdgePortPortread-onlycurrentThe port number of the port for which this entry contains Spanning Tree Protocol management information.
1.3.6.1.4.1.89.57.4.1.1.3Columnrldot1wRStpEdgePortStatusread-writecurrentSpecifies whether this port is an Edge Port or not
1.3.6.1.4.1.89.57.4.2Tablerldot1wRStpForceVersionTablenot-accessiblecurrentA table that contains <vlan> specific information for the Rapid Spanning Tree Protocol.
1.3.6.1.4.1.89.57.4.2.1Rowrldot1wRStpForceVersionEntrynot-accessiblecurrentA list of information maintained by every <vlan> about the RAPID Spanning Tree Protocol state for that pair.
1.3.6.1.4.1.89.57.4.2.1.1Columnrldot1wRStpForceVersionVlanread-onlycurrentThe Vlan number that the port belongs to, and for which this entry contains Spanning Tree Protocol management information, If STP per device then only one valu…
1.3.6.1.4.1.89.57.4.2.1.2Columnrldot1wRStpForceVersionStateread-writecurrentSpecifies whether this Bridge uses the normal RSTP algorithm, or STP Compatibility algorythm: 0 - STP Compatibility 2 - Normal RSTP
1.3.6.1.4.1.89.57.5Noderldot1pPriorityMap
1.3.6.1.4.1.89.57.5.1Scalarrldot1pPriorityMapStateread-writecurrentenable / disable
1.3.6.1.4.1.89.57.5.2Tablerldot1pPriorityMapTablenot-accessiblecurrentThis table hold information the priority maps
1.3.6.1.4.1.89.57.5.2.1Rowrldot1pPriorityMapEntrynot-accessiblecurrentThe row definition for this table.
1.3.6.1.4.1.89.57.5.2.1.1Columnrldot1pPriorityMapNameread-onlycurrentThe map name
1.3.6.1.4.1.89.57.5.2.1.2Columnrldot1pPriorityMapPriorityread-createcurrentThe map holding the queue
1.3.6.1.4.1.89.57.5.2.1.3Columnrldot1pPriorityMapPortread-createcurrentthe port that the map, is applied on in config
1.3.6.1.4.1.89.57.5.2.1.4Columnrldot1pPriorityMapPortListread-onlycurrentthe ports that the map, is applied on in actual
1.3.6.1.4.1.89.57.5.2.1.5Columnrldot1pPriorityMapStatusread-createcurrentThe status of the table entry. It's used to delete an entry
1.3.6.1.4.1.89.57.6Noderldot1sMstp
1.3.6.1.4.1.89.57.6.1Tablerldot1sMstpInstanceTablenot-accessiblecurrentA table that contains Mstp instance specific information for the Multiple Spanning Tree Protocol.
1.3.6.1.4.1.89.57.6.1.1Rowrldot1sMstpInstanceEntrynot-accessiblecurrentA list of information maintained by every instance about the multiple Spanning Tree Protocol state for that instance.
1.3.6.1.4.1.89.57.6.1.1.1Columnrldot1sMstpInstanceIdread-onlycurrentThe Instance index.
1.3.6.1.4.1.89.57.6.1.1.2Columnrldot1sMstpInstanceEnableread-onlycurrentSpecifies whether this Instance is STP enable or disable
1.3.6.1.4.1.89.57.6.1.1.3Columnrldot1sMstpInstanceTimeSinceTopologyChangeread-onlycurrentThe time (in hundredths of a second) since the last time a topology change was detected by the Mstp Instance .
1.3.6.1.4.1.89.57.6.1.1.4Columnrldot1sMstpInstanceTopChangesread-onlycurrentThe total number of topology changes detected by this Instance since the management entity was last reset or initialized.
1.3.6.1.4.1.89.57.6.1.1.5Columnrldot1sMstpInstanceDesignatedRootread-onlycurrentThe bridge identifier of the root of the spanning tree as determined by the Muliple Spanning Tree Protocol as executed by this node. This value is used as the …
1.3.6.1.4.1.89.57.6.1.1.6Columnrldot1sMstpInstanceRootCostread-onlycurrentThe cost of the path to the root as seen from this bridge.
1.3.6.1.4.1.89.57.6.1.1.7Columnrldot1sMstpInstanceRootPortread-onlycurrentThe port number of the port which offers the lowest cost path from this bridge to the root bridge.
1.3.6.1.4.1.89.57.6.1.1.8Columnrldot1sMstpInstanceMaxAgeread-onlycurrentThe maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is …
1.3.6.1.4.1.89.57.6.1.1.9Columnrldot1sMstpInstanceHelloTimeread-onlycurrentThe amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become …
1.3.6.1.4.1.89.57.6.1.1.10Columnrldot1sMstpInstanceHoldTimeread-onlycurrentThis time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredth…
1.3.6.1.4.1.89.57.6.1.1.11Columnrldot1sMstpInstanceForwardDelayread-onlycurrentThis time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The…
1.3.6.1.4.1.89.57.6.1.1.12Columnrldot1sMstpInstancePriorityread-writecurrentThe value of the write-able portion of the Bridge ID, i.e., the first four bits of the first octet of the (8 octet long) Bridge ID.The value is a product of 40…
1.3.6.1.4.1.89.57.6.1.1.13Columnrldot1sMstpInstanceRemainingHopesread-onlycurrentThis count value determines the amount of hopes the information transmited by this bridge on this instance can travel.
1.3.6.1.4.1.89.57.6.2Tablerldot1sMstpInstancePortTablenot-accessiblecurrentA table that contains pair <msti, port> specific information for the Spanning Tree Protocol.
1.3.6.1.4.1.89.57.6.2.1Rowrldot1sMstpInstancePortEntrynot-accessiblecurrentA list of information maintained by every pair <msti, port> about the Spanning Tree Protocol state for that pair.
1.3.6.1.4.1.89.57.6.2.1.1Columnrldot1sMstpInstancePortMstiIdread-onlycurrentThe Vlan group number that the port belongs to, and for which this entry contains Spanning Tree Protocol management information.
1.3.6.1.4.1.89.57.6.2.1.2Columnrldot1sMstpInstancePortPortread-onlycurrentThe port number of the port for which this entry contains Spanning Tree Protocol management information.
1.3.6.1.4.1.89.57.6.2.1.3Columnrldot1sMstpInstancePortPriorityread-writecurrentThe value of the priority field which is contained in the more significant 4 bits of the most significant octet of the (2 octet long) Port ID. The value is a p…
1.3.6.1.4.1.89.57.6.2.1.4Columnrldot1sMstpInstancePortStateread-onlycurrentThe port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the …
1.3.6.1.4.1.89.57.6.2.1.5Columnrldot1sMstpInstancePortEnableread-onlycurrentThe enabled/disabled status of the port.
1.3.6.1.4.1.89.57.6.2.1.6Columnrldot1sMstpInstancePortPathCostread-onlycurrentThe contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value o…
1.3.6.1.4.1.89.57.6.2.1.7Columnrldot1sMstpInstancePortDesignatedRootread-onlycurrentThe unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the po…
1.3.6.1.4.1.89.57.6.2.1.8Columnrldot1sMstpInstancePortDesignatedCostread-onlycurrentThe path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.
1.3.6.1.4.1.89.57.6.2.1.9Columnrldot1sMstpInstancePortDesignatedBridgeread-onlycurrentThe Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.
1.3.6.1.4.1.89.57.6.2.1.10Columnrldot1sMstpInstancePortDesignatedPortread-onlycurrentThe Port Identifier of the port on the Designated Bridge for this port's segment.
1.3.6.1.4.1.89.57.6.2.1.11Columnrldot1sMstpInstancePortForwardTransitionsread-onlycurrentThe number of times this port has transitioned from the Learning state to the Forwarding state.
1.3.6.1.4.1.89.57.6.2.1.12Columnrldot1sMStpInstancePortAdminPathCostread-writecurrentThe administratively assigned value for the contribution of this port to the path cost of paths towards the spanning tree root. Writing a value of '0' assigns …
1.3.6.1.4.1.89.57.6.2.1.13Columnrldot1sMStpInstancePortRoleread-onlycurrentSpecify the role of this this port.
1.3.6.1.4.1.89.57.6.3Scalarrldot1sMstpMaxHopesread-writecurrentMax number of hopes that an MST BPDU will travel inside a region.
1.3.6.1.4.1.89.57.6.4Scalarrldot1sMstpConfigurationNameread-onlycurrentThe active configuration name as will be caried in MST BPDU's.
1.3.6.1.4.1.89.57.6.5Scalarrldot1sMstpRevisionLevelread-onlycurrentThe active revision level.
1.3.6.1.4.1.89.57.6.6Tablerldot1sMstpVlanTablenot-accessiblecurrentA table that contains information about the alocation of vlans to groups.
1.3.6.1.4.1.89.57.6.6.1Rowrldot1sMstpVlanEntrynot-accessiblecurrentA list of information maintained by every vlan about the group it belongs to.
1.3.6.1.4.1.89.57.6.6.1.1Columnrldot1sMstpVlanread-onlycurrentThe vlan number of the vlan for which this entry contains Spanning Tree Protocol management information.
1.3.6.1.4.1.89.57.6.6.1.2Columnrldot1sMstpGroupread-onlycurrentSpecifid the active group number this vlan belonges to.
1.3.6.1.4.1.89.57.6.6.1.3Columnrldot1sMstpPendingGroupread-writecurrentSpecifid the pending group number this vlan belonges to.
1.3.6.1.4.1.89.57.6.7Tablerldot1sMstpExtPortTablenot-accessiblecurrentA table that contains MSTP information about ports of the CIST.
1.3.6.1.4.1.89.57.6.7.1Rowrldot1sMstpExtPortEntrynot-accessiblecurrentA list of information maintained by every port of the CIST.
1.3.6.1.4.1.89.57.6.7.1.1Columnrldot1sMstpExtPortPortread-onlycurrentThe port number of the port for which this entry contains Spanning Tree Protocol management information.
1.3.6.1.4.1.89.57.6.7.1.2Columnrldot1sMstpExtPortInternalOperPathCostread-onlycurrentThe contribution of this port to the path cost of paths towards the spanning tree regional root which include this port. 802.1S-2002 recommends that the defaul…
1.3.6.1.4.1.89.57.6.7.1.3Columnrldot1sMstpExtPortDesignatedRegionalRootread-onlycurrentThe unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the po…
1.3.6.1.4.1.89.57.6.7.1.4Columnrldot1sMstpExtPortDesignatedRegionalCostread-onlycurrentThe regional path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.
1.3.6.1.4.1.89.57.6.7.1.5Columnrldot1sMstpExtPortBoundaryread-onlycurrentIndication if the port is conented to to a lan segment outside or inside the region.
1.3.6.1.4.1.89.57.6.7.1.6Columnrldot1sMstpExtPortInternalAdminPathCostread-writecurrentThe administratively assigned value for the contribution of this port to the path cost of paths towards the spanning tree root. Writing a value of '0' assigns …
1.3.6.1.4.1.89.57.6.8Scalarrldot1sMstpDesignatedMaxHopesread-onlycurrentMax number of hopes that an MST BPDU will travel inside a region.
1.3.6.1.4.1.89.57.6.9Scalarrldot1sMstpRegionalRootread-onlycurrentCIST Regional Root Identifier (13.16.4). The Bridge Identifier of the current CIST Regional Root.
1.3.6.1.4.1.89.57.6.10Scalarrldot1sMstpRegionalRootCostread-onlycurrentThe CIST path cost from the transmitting Bridge to the CIST Regional Root.
1.3.6.1.4.1.89.57.6.11Scalarrldot1sMstpPendingConfigurationNameread-writecurrentThe pending configuration name.
1.3.6.1.4.1.89.57.6.12Scalarrldot1sMstpPendingRevisionLevelread-writecurrentThe pending revision level.
1.3.6.1.4.1.89.57.6.13Scalarrldot1sMstpPendingActionread-writecurrentThe action to be done with the pending configuration. copyPendingActive - to copy the pending mst configuration to the active one. copyActivePending - to copy …
1.3.6.1.4.1.89.57.6.14Scalarrldot1sMstpRemainingHopsread-onlycurrentThis count value determines the amount of hops the information transmitted by this bridge can travel.
1.3.6.1.4.1.89.57.6.15Tablerldot1sMstpInstanceVlanTablenot-accessiblecurrentThis table contains vlan lists per MSTP instances.
1.3.6.1.4.1.89.57.6.15.1Rowrldot1sMstpInstanceVlanEntrynot-accessiblecurrentThe entry contains vlan lists per specific MSTP instance.
1.3.6.1.4.1.89.57.6.15.1.1Columnrldot1sMstpInstanceVlanIdread-onlycurrentSpecifiy the instance number.
1.3.6.1.4.1.89.57.6.15.1.2Columnrldot1sMstpInstanceVlanId1To1024read-onlycurrentfirst VlanId List of specific MSTP instance.
1.3.6.1.4.1.89.57.6.15.1.3Columnrldot1sMstpInstanceVlanId1025To2048read-onlycurrentsecond VlanId List of specific MSTP instance.
1.3.6.1.4.1.89.57.6.15.1.4Columnrldot1sMstpInstanceVlanId2049To3072read-onlycurrentthird VlanId List of specific MSTP instance.
1.3.6.1.4.1.89.57.6.15.1.5Columnrldot1sMstpInstanceVlanId3073To4094read-onlycurrentfourth VlanId List of specific MSTP instance.
1.3.6.1.4.1.89.57.7Noderldot1dTpAgingTime
1.3.6.1.4.1.89.57.7.1Scalarrldot1dTpAgingTimeMinread-onlycurrentThe min timeout period in seconds for aging out dynamically learned forwarding information.
1.3.6.1.4.1.89.57.7.2Scalarrldot1dTpAgingTimeMaxread-onlycurrentThe max timeout period in seconds for aging out dynamically learned forwarding information.
Type Definitions
NameSyntaxStatusDescription
VlanList1OCTET STRING (SIZE(0..128))currentEach octet within this value specifies a set of eight vlans, with the first octet specifying vlan 1 through 8, the second octet specifying vlan 9 through 16, etc. Within each octet, the most significant bit represents t…
VlanList2OCTET STRING (SIZE(0..128))currentAs VlanList1 but represent vlans 1025-2048
VlanList3OCTET STRING (SIZE(0..128))currentAs VlanList1 but represent vlans 2049-3072
VlanList4OCTET STRING (SIZE(0..128))currentAs VlanList1 but represent vlans 3073-4094
MIB Viewer