MIB Viewer

E5-120-IESCOMMON-MIB

240 objects
No module-level DESCRIPTION found.
Imported Objects
E5-120-MIBe5x120 iesSeriesCommon
Q-BRIDGE-MIBPortList
RFC-1212--
RFC1155-SMIenterprises
RFC1213-MIBDisplayString ifIndex PhysAddress
SNMPv2-SMIIpAddress NOTIFICATION-TYPE OBJECT-TYPE
SNMPv2-TCRowStatus
OIDNameAccessStatusDescription
1.3.6.1.4.1.6321.1.2.3.3.0.1NotificationrebootcurrentSend a message to the manager that the system is going to shutdown. The variable is the reason that causes the system to shutdown.
1.3.6.1.4.1.6321.1.2.3.3.0.2NotificationsystemShutdowncurrentSend a message to the manager that the system is going to shutdown. The variable is the reason that causes the system to shutdown.
1.3.6.1.4.1.6321.1.2.3.3.0.3NotificationoverheatcurrentSend a message to the manager that the system is overheated. The variable in the binding list is the current temperature in Celsius of the system.
1.3.6.1.4.1.6321.1.2.3.3.0.4NotificationoverheatOvercurrentSend a message to the manager that the overheated condition is over. The variable in the binding list is the current temperature in Celsius of the system.
1.3.6.1.4.1.6321.1.2.3.3.0.5NotificationerrLogcurrentSend a message to the manager that an error log is created in system. The variable in the binding list is the content of the error log.
1.3.6.1.4.1.6321.1.2.3.3.0.6NotificationfanRpmLowcurrentSend a message to the manager that the rpm of the fan is too low. The variable in the binding list is the current rpm of the fan.
1.3.6.1.4.1.6321.1.2.3.3.0.7NotificationfanRpmNormalcurrentSend a message to the manager that the low-rpm condition of the fan is over. The variable in the binding list is the current rpm of the fan.
1.3.6.1.4.1.6321.1.2.3.3.0.8NotificationvoltageOutOfRangecurrentSend a message to the manager that the voltage of the system is out of range. The variable in the binding list is the current voltage in volt of the system.
1.3.6.1.4.1.6321.1.2.3.3.0.9NotificationvoltageNormalcurrentSend a message to the manager that the low-voltage condition is over. The variable in the binding list is the current voltage in volt of the system.
1.3.6.1.4.1.6321.1.2.3.3.0.10NotificationsystemMaintenanceFailurecurrentSend a message to the manager that the system maintence operation fail. The variable in the variable binding indicates the problem.
1.3.6.1.4.1.6321.1.2.3.3.0.11NotificationconfigChangecurrentThis notification indicates that the configuration data of one module is changed.
1.3.6.1.4.1.6321.1.2.3.3.0.12NotificationmoduleUpcurrentA moduleUp trap signifies that the sending protocol entity recognizes that one of the modules represented in the agent's configuration has come up.
1.3.6.1.4.1.6321.1.2.3.3.0.13NotificationmoduleDowncurrentA moduleDown trap signifies that the sending protocol entity recognizes a failure in one of the modules represented in the agent's configuration.
1.3.6.1.4.1.6321.1.2.3.3.0.14NotificationmodulePlugIncurrentA modulePlugIn trap signifies that the sending protocol entity recognizes that one module is plugged into the device.
1.3.6.1.4.1.6321.1.2.3.3.0.15NotificationmodulePullOutcurrentA modulePullOut trap signifies that the sending protocol entity recognizes one module is pulled out from the device.
1.3.6.1.4.1.6321.1.2.3.3.0.16NotificationpowerDC48VAFailurecurrentThe trap signifies that the power supply of DC 48V at the right side of main Chassis (front view) failed.
1.3.6.1.4.1.6321.1.2.3.3.0.17NotificationpowerDC48VANormalcurrentThe trap signifies that the power supply of DC 48V at the right side of main Chassis (front view) is in normal state.
1.3.6.1.4.1.6321.1.2.3.3.0.18NotificationpowerDC48VBFailurecurrentThe trap signifies that the power supply of DC 48V at the left side of main Chassis (front view) failed.
1.3.6.1.4.1.6321.1.2.3.3.0.19NotificationpowerDC48VBNormalcurrentThe trap signifies that the power supply of DC 48V at the left side of main Chassis (front view) is in normal state.
1.3.6.1.4.1.6321.1.2.3.3.0.20NotificationextAlarmInputTriggercurrentThe trap signifies that the external alarm input of MSC card is triggered.
1.3.6.1.4.1.6321.1.2.3.3.0.21NotificationextAlarmInputReleasecurrentThe trap signifies that the external alarm input of MSC card is released.
1.3.6.1.4.1.6321.1.2.3.3.0.22NotificationthermalSensorFailurecurrentThe trap signifies that the thermal sensor failed.
1.3.6.1.4.1.6321.1.2.3.3.0.23NotificationmscSwitchOverOKcurrentThe trap signifies that MSC card is switched over successfully. The value of iesSlotId is the slot ID of the current working MSC.
1.3.6.1.4.1.6321.1.2.3.3.0.24NotificationnetworkTopologyChangecurrentThe trap signifies the network topology is changed.
1.3.6.1.4.1.6321.1.2.3.3.0.25NotificationadslAtucLofcurrentThe trap signifies ATU-C Loss of Framing.
1.3.6.1.4.1.6321.1.2.3.3.0.26NotificationadslAturLofcurrentThe trap signifies ATU-R Loss of Framing.
1.3.6.1.4.1.6321.1.2.3.3.0.27NotificationadslAtucLoscurrentThe trap signifies ATU-C Loss of Signal.
1.3.6.1.4.1.6321.1.2.3.3.0.28NotificationadslAturLoscurrentThe trap signifies ATU-R Loss of Signal.
1.3.6.1.4.1.6321.1.2.3.3.0.29NotificationadslAturLprcurrentThe trap signifies ATU-R Loss of Power.
1.3.6.1.4.1.6321.1.2.3.3.0.30NotificationadslAtucLofClearcurrentThe trap signifies ATU-C Loss of Framing is cleared.
1.3.6.1.4.1.6321.1.2.3.3.0.31NotificationadslAturLofClearcurrentThe trap signifies ATU-R Loss of Framing is cleared.
1.3.6.1.4.1.6321.1.2.3.3.0.32NotificationadslAtucLosClearcurrentThe trap signifies ATU-C Loss of Signal is cleared.
1.3.6.1.4.1.6321.1.2.3.3.0.33NotificationadslAturLosClearcurrentThe trap signifies ATU-R Loss of Signal is cleared.
1.3.6.1.4.1.6321.1.2.3.3.0.34NotificationadslAturLprClearcurrentThe trap signifies ATU-R Loss of Power is cleared.
1.3.6.1.4.1.6321.1.2.3.3.98.1NodeiesChassis
1.3.6.1.4.1.6321.1.2.3.3.98.1.1ScalariesNumOfChassisread-onlycurrentThe number of chassis in the IES-2000/3000 system
1.3.6.1.4.1.6321.1.2.3.3.98.1.2TableiesChassisTablenot-accessiblecurrentThe table which contains the chassis information in IES-2000/3000 system
1.3.6.1.4.1.6321.1.2.3.3.98.1.2.1RowiesChassisEntrynot-accessiblecurrent
1.3.6.1.4.1.6321.1.2.3.3.98.1.2.1.1ColumniesChassisIdread-onlycurrentThe Chassis ID
1.3.6.1.4.1.6321.1.2.3.3.98.1.2.1.2ColumniesChassisFrameNumberread-writecurrentThe Frame ID
1.3.6.1.4.1.6321.1.2.3.3.98.1.2.1.3ColumniesChassisSerialNumberread-onlycurrentThe Chassis Serial Number
1.3.6.1.4.1.6321.1.2.3.3.98.1.2.1.4ColumniesChassisNumberread-writecurrentThe Chassis Number which is defined by the system administrator for management purpose
1.3.6.1.4.1.6321.1.2.3.3.98.1.2.1.5ColumniesChassisStatusread-onlycurrentThe current status of the chassis.
1.3.6.1.4.1.6321.1.2.3.3.98.1.2.1.6ColumniesChassisProductPartNumberread-onlycurrentProduct part number
1.3.6.1.4.1.6321.1.2.3.3.98.1.2.1.7ColumniesChassisHwRevisionNumberread-onlycurrentHW revision Number
1.3.6.1.4.1.6321.1.2.3.3.98.1.2.1.8ColumniesChassisCleiCoderead-onlycurrentCLEI code
1.3.6.1.4.1.6321.1.2.3.3.98.1.2.1.9ColumniesChassisHwVersionread-onlycurrentHardware version
1.3.6.1.4.1.6321.1.2.3.3.98.1.2.1.10ColumniesChassisMacAddressread-onlycurrentMAC address
1.3.6.1.4.1.6321.1.2.3.3.98.1.3TableiesSlotTablenot-accessiblecurrentThe table which contains the slot information in a chassis of IES-2000/3000 system
1.3.6.1.4.1.6321.1.2.3.3.98.1.3.1RowiesSlotEntrynot-accessiblecurrent
1.3.6.1.4.1.6321.1.2.3.3.98.1.3.1.1ColumniesSlotIdread-onlycurrentIdentity of the slot
1.3.6.1.4.1.6321.1.2.3.3.98.1.3.1.2ColumniesSlotModuleTyperead-onlycurrentCard type of the plug-in card in IES-2000/3000.
1.3.6.1.4.1.6321.1.2.3.3.98.1.3.1.3ColumniesSlotModuleDescrread-onlycurrentThe descriptions of the plug-in card in IES-2000/3000.
1.3.6.1.4.1.6321.1.2.3.3.98.1.3.1.4ColumniesSlotModuleFWVersionread-onlycurrentThe firmware version of the plug-in card in IES-2000/3000.
1.3.6.1.4.1.6321.1.2.3.3.98.1.3.1.5ColumniesSlotModuleDriverVersionread-onlycurrentThe DSL driver of the plug-in card in IES-2000/3000.
1.3.6.1.4.1.6321.1.2.3.3.98.1.3.1.6ColumniesSlotModuleModemCodeVersionread-onlycurrentThe DSL modem code version of the plug-in card in IES-2000/3000
1.3.6.1.4.1.6321.1.2.3.3.98.1.3.1.7ColumniesSlotModuleStatusread-onlycurrentThe module state of the plug-in card in IES-2000/3000
1.3.6.1.4.1.6321.1.2.3.3.98.1.3.1.8ColumniesSlotModuleAlarmStatusread-onlycurrentThis variable indicates the alarm status of the module. It is a bit map represented as a sum, therefore, it can represent multiple defects simultaneously. The …
1.3.6.1.4.1.6321.1.2.3.3.98.1.4TableiesMscPortConfTablenot-accessiblecurrentThe table contains port configuration information in MSC1000.
1.3.6.1.4.1.6321.1.2.3.3.98.1.4.1RowiesMscPortConfEntrynot-accessiblecurrent
1.3.6.1.4.1.6321.1.2.3.3.98.1.4.1.1ColumniesMscPortIdread-onlycurrentIdentity of the extension slot in MSC1000.
1.3.6.1.4.1.6321.1.2.3.3.98.1.4.1.2ColumniesMscPortTyperead-onlycurrentPort type of the extension slot in MSC1000.
1.3.6.1.4.1.6321.1.2.3.3.98.1.4.1.3ColumniesMscPortIfIndexread-onlycurrent
1.3.6.1.4.1.6321.1.2.3.3.98.1.4.1.4ColumniesMscPortSpeedread-writecurrent
1.3.6.1.4.1.6321.1.2.3.3.98.1.4.1.5ColumniesMscPortDuplexread-writecurrent
1.3.6.1.4.1.6321.1.2.3.3.98.1.4.1.6ColumniesMscPortFlowControlread-writecurrent
1.3.6.1.4.1.6321.1.2.3.3.98.1.4.1.7ColumniesMscPortDefaultVLANTaggingread-writecurrent
1.3.6.1.4.1.6321.1.2.3.3.98.1.4.1.8ColumniesMscPortTrunkGroupIdread-onlycurrent
1.3.6.1.4.1.6321.1.2.3.3.98.1.4.1.9ColumniesMscPortModeread-writecurrentThe operational mode for uplink and subtending ports in MSC. Only the operational mode of subtending ports can be modified.
1.3.6.1.4.1.6321.1.2.3.3.98.1.4.1.10ColumniesMscPortVLANTrunkingread-writecurrentThe VLAN trunking setting for uplink and subtending ports in MSC.
1.3.6.1.4.1.6321.1.2.3.3.98.2NodeiesHWMonitor
1.3.6.1.4.1.6321.1.2.3.3.98.2.1TableiesFanRpmTablenot-accessiblecurrentA table that contains rpm information about the fans.
1.3.6.1.4.1.6321.1.2.3.3.98.2.1.1RowiesFanRpmEntrynot-accessiblecurrentA list of rpm information for each fan.
1.3.6.1.4.1.6321.1.2.3.3.98.2.1.1.1ColumniesFanRpmIndexread-onlycurrentThe identity of the fan.
1.3.6.1.4.1.6321.1.2.3.3.98.2.1.1.2ColumniesFanRpmCurValueread-onlycurrentThe current rpm of the fan.
1.3.6.1.4.1.6321.1.2.3.3.98.2.1.1.3ColumniesFanRpmMaxValueread-onlycurrentThe maximum rpm ever performed by the fan.
1.3.6.1.4.1.6321.1.2.3.3.98.2.1.1.4ColumniesFanRpmMinValueread-onlycurrentThe minimum rpm ever performed by the fan.
1.3.6.1.4.1.6321.1.2.3.3.98.2.1.1.5ColumniesFanRpmLowThreshread-onlycurrentThe low threshold of the rpm of the fan. If the current rpm is less than the threshold, the device will initiate the fanRpmLow trap.
1.3.6.1.4.1.6321.1.2.3.3.98.2.1.1.6ColumniesFanRpmDescrread-onlycurrentThe description of the fan (e.g. location, function, etc.).
1.3.6.1.4.1.6321.1.2.3.3.98.2.2TableiesVoltageTablenot-accessiblecurrentA table that contains voltage information about the system.
1.3.6.1.4.1.6321.1.2.3.3.98.2.2.1RowiesVoltageEntrynot-accessiblecurrentA list of voltage information for each sensor.
1.3.6.1.4.1.6321.1.2.3.3.98.2.2.1.1ColumniesVoltageIndexread-onlycurrentThe identity of the sensor.
1.3.6.1.4.1.6321.1.2.3.3.98.2.2.1.2ColumniesVoltageCurValueread-onlycurrentThe current voltage detected by the sensor (in milli-voltage).
1.3.6.1.4.1.6321.1.2.3.3.98.2.2.1.3ColumniesVoltageMaxValueread-onlycurrentThe maximum voltage ever detected by the sensor (in milli-voltage).
1.3.6.1.4.1.6321.1.2.3.3.98.2.2.1.4ColumniesVoltageMinValueread-onlycurrentThe minimum voltage ever detected by the sensor (in milli-voltage).
1.3.6.1.4.1.6321.1.2.3.3.98.2.2.1.5ColumniesVoltageNominalValueread-onlycurrentThe nominal voltage which the power should supply (in milli-voltage).
1.3.6.1.4.1.6321.1.2.3.3.98.2.2.1.6ColumniesVoltageLowThreshread-onlycurrentThe low threshold of the voltage (in milli-voltage). If the current voltage is less than the threshold, the device will initiate the voltageLow trap.
1.3.6.1.4.1.6321.1.2.3.3.98.2.2.1.7ColumniesVoltageDescrread-onlycurrentThe description of the voltage (e.g. location, nominal value, etc.).
1.3.6.1.4.1.6321.1.2.3.3.98.2.3TableiesSysTempTablenot-accessiblecurrentA table that contains temperature information about system.
1.3.6.1.4.1.6321.1.2.3.3.98.2.3.1RowiesSysTempEntrynot-accessiblecurrentA list of temperature information for each sensor.
1.3.6.1.4.1.6321.1.2.3.3.98.2.3.1.1ColumniesSysTempIndexread-onlycurrentThe identity of the sensor.
1.3.6.1.4.1.6321.1.2.3.3.98.2.3.1.2ColumniesSysTempCurValueread-onlycurrentThe current temperature detected in Celsius by the sensor.
1.3.6.1.4.1.6321.1.2.3.3.98.2.3.1.3ColumniesSysTempMaxValueread-onlycurrentThe maximum temperature ever detected in Celsius by the sensor.
1.3.6.1.4.1.6321.1.2.3.3.98.2.3.1.4ColumniesSysTempMinValueread-onlycurrentThe minimum temperature ever detected in Celsius by the sensor.
1.3.6.1.4.1.6321.1.2.3.3.98.2.3.1.5ColumniesSysTempHighThreshread-onlycurrentThe high threshold of the temperature in Celsius. If the current temperature is higher than the threshold, the device will initiate the overheat trap.
1.3.6.1.4.1.6321.1.2.3.3.98.2.3.1.6ColumniesSysTempDescrread-onlycurrentThe description of the temperature sensor (e.g. location, function, etc.).
1.3.6.1.4.1.6321.1.2.3.3.98.3NodeiesSysMgnt
1.3.6.1.4.1.6321.1.2.3.3.98.3.1NodeiesSysState
1.3.6.1.4.1.6321.1.2.3.3.98.3.1.1ScalariesSystemCurrentStatusread-onlycurrentThis variable indicates the status of the system. The sysCurrentStatus is a bit map represented as a sum, therefore, it can represent multiple defects simultan…
1.3.6.1.4.1.6321.1.2.3.3.98.3.1.2ScalariesProblemCauseread-onlycurrentIt describes the problem occurred in the system, e.g. maintenance operation failures, system reboot, error log, ...etc.
1.3.6.1.4.1.6321.1.2.3.3.98.3.2NodeiesSysMaintenance
1.3.6.1.4.1.6321.1.2.3.3.98.3.2.1ScalariesMaintenanceOpsread-writecurrentThe managed object is for system maintenance. When the EMS wants to trigger the system maitenance operation, the EMS shall send SNMP-SET message to set the cor…
1.3.6.1.4.1.6321.1.2.3.3.98.3.2.2ScalariesMaintenanceTargetread-writecurrentThe managed object is used for identify the target on which the maintenance operation should be performed.
1.3.6.1.4.1.6321.1.2.3.3.98.3.2.3ScalariesMaintenanceDSLConfOpsread-writecurrentThe managed object is for xDSL line configuration. When the EMS wants to issue the desired operation, the EMS shall send SNMP-SET message to set the correspond…
1.3.6.1.4.1.6321.1.2.3.3.98.3.2.4ScalariesMaintenanceDSLConfTargetread-writecurrentThe managed object is used for identify the target on which the line configuration should be performed. The target is encoded as: Byte 1: the octet specifies a…
1.3.6.1.4.1.6321.1.2.3.3.98.3.2.5ScalariesMaintenanceDSLConfProfileNameread-writecurrentThe DSL profile name
1.3.6.1.4.1.6321.1.2.3.3.98.3.2.6ScalariesMaintenanceDSLConfModeread-writecurrentThe DSL mode. The semantic for each bit is: Bit 1: ADSL, G.lite Bit 2: ADSL, G.dmt Bit 3: ADSL, T1.413 Bit 4: ADSL, Auto Bit 5: ADSL, ETSI Bit 6: ADSL2, Bit 7:…
1.3.6.1.4.1.6321.1.2.3.3.98.3.2.7ScalariesMaintenanceDSLConfPktFilterread-writecurrentThe packet filter. The semantic for each bit is: Bit 1: accept all Bit 2: accept PPPoE only Bit 3: reject ARP Bit 4: reject DHCP Bit 5: reject EAPOL Bit 6: rej…
1.3.6.1.4.1.6321.1.2.3.3.98.3.2.8ScalariesMaintenanceDSLConfDot1xControlread-writecurrentThe configuration defines the 802.1x control type.
1.3.6.1.4.1.6321.1.2.3.3.98.3.2.9ScalariesMaintenanceDSLConfDot1xReauthPeriodread-writecurrentThe configuration defines the 802.1x re-authentication period (seconds).
1.3.6.1.4.1.6321.1.2.3.3.98.3.2.10ScalariesMaintenanceDSLConfMacCountread-writecurrentThe configuration defines the number of mac addresses which can pass through the port.
1.3.6.1.4.1.6321.1.2.3.3.98.3.2.11ScalariesMaintenanceVpiread-writecurrentVPI of the channel
1.3.6.1.4.1.6321.1.2.3.3.98.3.2.12ScalariesMaintenanceVciread-writecurrentVCI of the channel
1.3.6.1.4.1.6321.1.2.3.3.98.3.2.13ScalariesMaintenanceDSLConfAlarmProfileNameread-writecurrentThe DSL alarm profile name
1.3.6.1.4.1.6321.1.2.3.3.98.3.2.14ScalariesMaintenanceDSLConfAnnexLread-writecurrentThe annex L setting of the ADSL line (Only in AnnexA).
1.3.6.1.4.1.6321.1.2.3.3.98.3.2.15ScalariesMaintenanceDSLConfPmModeread-writecurrentThe power management mode of the ADSL line.
1.3.6.1.4.1.6321.1.2.3.3.98.3.2.16ScalariesMaintenanceDSLConfRateModeread-writecurrentDefines what form of transmit rate adaptation is configured on this modem. See ADSL Forum TR-005 [3] for more information.
1.3.6.1.4.1.6321.1.2.3.3.98.3.2.17ScalariesMaintenanceDSLConfIgmpFilterread-writecurrentThe IGMP filter name.
1.3.6.1.4.1.6321.1.2.3.3.98.3.3NodeiesSysTimeSetup
1.3.6.1.4.1.6321.1.2.3.3.98.3.3.1ScalariesTimeServerModeread-writecurrentThe mechanism of Time Server when the system boots up.
1.3.6.1.4.1.6321.1.2.3.3.98.3.3.2ScalariesTimeServerIPread-writecurrentThe IP Address of Time Server
1.3.6.1.4.1.6321.1.2.3.3.98.3.3.3ScalariesSystemTimeread-writecurrentThe system time
1.3.6.1.4.1.6321.1.2.3.3.98.3.3.4ScalariesSystemDateread-writecurrentThe system date
1.3.6.1.4.1.6321.1.2.3.3.98.3.3.5ScalariesSystemTimeZoneread-writecurrentThe system time zone
1.3.6.1.4.1.6321.1.2.3.3.98.3.4NodeiesSysAccessControl
1.3.6.1.4.1.6321.1.2.3.3.98.3.4.1TableiesAccessCtrlTablenot-accessiblecurrentA table that contains information about service access control.
1.3.6.1.4.1.6321.1.2.3.3.98.3.4.1.1RowiesAccessCtrlEntrynot-accessiblecurrentA list of access control entry.
1.3.6.1.4.1.6321.1.2.3.3.98.3.4.1.1.1ColumniesAccessCtrlServiceread-onlycurrentThe service type of the access control entry.
1.3.6.1.4.1.6321.1.2.3.3.98.3.4.1.1.2ColumniesAccessCtrlEnableread-writecurrentEnable or disable the service.
1.3.6.1.4.1.6321.1.2.3.3.98.3.4.1.1.3ColumniesAccessCtrlPortread-writecurrentThe port number which the service uses.
1.3.6.1.4.1.6321.1.2.3.3.98.3.4.2ScalariesMaxNumOfSecuredClientsread-onlycurrentThe maximum number of sets of secured clients.
1.3.6.1.4.1.6321.1.2.3.3.98.3.4.3TableiesSecuredClientTablenot-accessiblecurrentA table that contains information about secured clients.
1.3.6.1.4.1.6321.1.2.3.3.98.3.4.3.1RowiesSecuredClientEntrynot-accessiblecurrentA list of secured client entry.
1.3.6.1.4.1.6321.1.2.3.3.98.3.4.3.1.1ColumniesSecuredClientStartIpread-onlycurrentThe starting IP address of a set of secured clients.
1.3.6.1.4.1.6321.1.2.3.3.98.3.4.3.1.2ColumniesSecuredClientEndIpread-onlycurrentThe ending IP address of a set of secured clients.
1.3.6.1.4.1.6321.1.2.3.3.98.3.4.3.1.3ColumniesSecuredClientServiceread-createcurrentEach bit corresponds to a service. The bit is set to 1 if the service is enabled, and set to 0 if the service is disabled. The various bit positions are: BIT 1…
1.3.6.1.4.1.6321.1.2.3.3.98.3.4.3.1.4ColumniesSecuredClientRowStatusread-createcurrentThis object is used to create a new row or modify or delete an existing row in this table. A row is activated by setting this object to `active', and is deacti…
1.3.6.1.4.1.6321.1.2.3.3.98.3.5NodeiesSysStaticRoute
1.3.6.1.4.1.6321.1.2.3.3.98.3.5.1ScalariesMaxNumOfStaticRoutesread-onlycurrentThe maximum number of static routes.
1.3.6.1.4.1.6321.1.2.3.3.98.3.5.2TableiesStaticRouteTablenot-accessiblecurrentA table that contains information about static routes.
1.3.6.1.4.1.6321.1.2.3.3.98.3.5.2.1RowiesStaticRouteEntrynot-accessiblecurrentA list of static route entry.
1.3.6.1.4.1.6321.1.2.3.3.98.3.5.2.1.1ColumniesStaticRouteNameread-onlycurrentThe name of the static route.
1.3.6.1.4.1.6321.1.2.3.3.98.3.5.2.1.2ColumniesStaticRouteDestread-createcurrentThe destination IP address of the static route.
1.3.6.1.4.1.6321.1.2.3.3.98.3.5.2.1.3ColumniesStaticRouteMaskread-createcurrentThe subnet mask of the static route.
1.3.6.1.4.1.6321.1.2.3.3.98.3.5.2.1.4ColumniesStaticRouteGatewayread-createcurrentThe gateway IP address of the static route.
1.3.6.1.4.1.6321.1.2.3.3.98.3.5.2.1.5ColumniesStaticRouteMetricread-createcurrentThe routing metric of the static route.
1.3.6.1.4.1.6321.1.2.3.3.98.3.5.2.1.6ColumniesStaticRouteRowStatusread-createcurrentThis object is used to create a new row or modify or delete an existing row in this table. A row is activated by setting this object to `active', and is deacti…
1.3.6.1.4.1.6321.1.2.3.3.98.3.6NodeiesSyslogSetup
1.3.6.1.4.1.6321.1.2.3.3.98.3.6.1ScalariesSysLogEnableread-writecurrentEnable/disable syslog function.
1.3.6.1.4.1.6321.1.2.3.3.98.3.6.2ScalariesSysLogServerread-writecurrentIP address of the syslog server.
1.3.6.1.4.1.6321.1.2.3.3.98.3.6.3ScalariesSysLogFacilityread-writecurrentLog facility used by the syslog function.
1.3.6.1.4.1.6321.1.2.3.3.98.3.7NodeiesSysDhcpSetup
1.3.6.1.4.1.6321.1.2.3.3.98.3.7.1ScalariesDhcpRelayEnableread-writecurrentEnable/disable DHCP relay function.
1.3.6.1.4.1.6321.1.2.3.3.98.3.7.2ScalariesDhcpRelayOption82Enableread-writecurrentEnable/disable DHCP relay Option82 function.
1.3.6.1.4.1.6321.1.2.3.3.98.3.7.3ScalariesDhcpRelayOption82Inforead-writecurrentUser specific Option82 information.
1.3.6.1.4.1.6321.1.2.3.3.98.3.7.4ScalariesMaxNumOfDhcpServersread-onlycurrentThe maximum number of DHCP servers.
1.3.6.1.4.1.6321.1.2.3.3.98.3.7.5TableiesDhcpServerTablenot-accessiblecurrentA table that contains DHCP server information.
1.3.6.1.4.1.6321.1.2.3.3.98.3.7.5.1RowiesDhcpServerEntrynot-accessiblecurrentThe entry of DHCP server table.
1.3.6.1.4.1.6321.1.2.3.3.98.3.7.5.1.1ColumniesDhcpServerIpread-onlycurrentThe IP address of the DHCP server.
1.3.6.1.4.1.6321.1.2.3.3.98.3.7.5.1.2ColumniesDhcpServerRowStatusread-createcurrentThe row status of the DHCP server entry.
1.3.6.1.4.1.6321.1.2.3.3.98.3.8NodeiesSysSNMPSetup
1.3.6.1.4.1.6321.1.2.3.3.98.3.8.1ScalariesMaxNumberOfTrapDestinationsread-onlycurrentThe max number of the trap destinations.
1.3.6.1.4.1.6321.1.2.3.3.98.3.8.2TableiesSNMPTrapDestTablenot-accessiblecurrentA table that contains SNMP trap destination information.
1.3.6.1.4.1.6321.1.2.3.3.98.3.8.2.1RowiesSNMPTrapDestEntrynot-accessiblecurrentThe entry of SNMP trap destination table.
1.3.6.1.4.1.6321.1.2.3.3.98.3.8.2.1.1ColumniesTrapDestIpread-onlycurrentThe IP address of the trap destination.
1.3.6.1.4.1.6321.1.2.3.3.98.3.8.2.1.2ColumniesTrapDestPortread-onlycurrentThe UDP port of the trap destination.
1.3.6.1.4.1.6321.1.2.3.3.98.3.8.2.1.3ColumniesTrapDestRowStatusread-createcurrentThe row status of the trap destination entry.
1.3.6.1.4.1.6321.1.2.3.3.98.3.8.3ScalariesSnmpGetCommunityread-writecurrentThe SNMP get community.
1.3.6.1.4.1.6321.1.2.3.3.98.3.8.4ScalariesSnmpSetCommunityread-writecurrentThe SNMP set community.
1.3.6.1.4.1.6321.1.2.3.3.98.3.8.5ScalariesSnmpTrapCommunityread-writecurrentThe SNMP trap community.
1.3.6.1.4.1.6321.1.2.3.3.98.3.9NodeiesSysDot1xSetup
1.3.6.1.4.1.6321.1.2.3.3.98.3.9.1ScalariesMaxNumberOfRadiusServersread-onlycurrentThe max number of the RADIUS Servers.
1.3.6.1.4.1.6321.1.2.3.3.98.3.9.2TableiesRadiusServerTablenot-accessiblecurrentA table that contains Radius Server information.
1.3.6.1.4.1.6321.1.2.3.3.98.3.9.2.1RowiesRadiusServerEntrynot-accessiblecurrentThe entry of Radius Server table.
1.3.6.1.4.1.6321.1.2.3.3.98.3.9.2.1.1ColumniesRadiusServerIndexread-onlycurrentThe identity of the RADIUS server.
1.3.6.1.4.1.6321.1.2.3.3.98.3.9.2.1.2ColumniesRadiusServerIpread-createcurrentThe IP address of the Radius Server.
1.3.6.1.4.1.6321.1.2.3.3.98.3.9.2.1.3ColumniesRadiusServerPortread-createcurrentThe UDP port of the Radius Server.
1.3.6.1.4.1.6321.1.2.3.3.98.3.9.2.1.4ColumniesRadiusSharedSecretread-createcurrentThe shared secret of the Radius Server.
1.3.6.1.4.1.6321.1.2.3.3.98.3.9.2.1.5ColumniesRadiusServerRowStatusread-createcurrentThe row status of the Radius Server entry.
1.3.6.1.4.1.6321.1.2.3.3.98.3.9.3ScalariesDot1xEnableread-writecurrentEnable/disable the 802.1x function.
1.3.6.1.4.1.6321.1.2.3.3.98.3.9.4TableiesDot1xPortTablenot-accessiblecurrentThis table includes the configuration of 802.1x.
1.3.6.1.4.1.6321.1.2.3.3.98.3.9.4.1RowiesDot1xPortEntrynot-accessiblecurrentAn entry in iesDot1xPortTable.
1.3.6.1.4.1.6321.1.2.3.3.98.3.9.4.1.1ColumniesDot1xPortEnableread-writecurrentThe option defines if the port enables 802.1x settings.
1.3.6.1.4.1.6321.1.2.3.3.98.3.9.4.1.2ColumniesDot1xPortControlread-writecurrentThe configuration defines the 802.1x port control type.
1.3.6.1.4.1.6321.1.2.3.3.98.3.9.4.1.3ColumniesDot1xPortReAuthEnableread-writecurrentThe option defines if the port enables 802.1x re-authentication.
1.3.6.1.4.1.6321.1.2.3.3.98.3.9.4.1.4ColumniesDot1xPortReAuthPeriodread-writecurrentThe configuration defines the 802.1x re-authentication period (seconds) for each port.
1.3.6.1.4.1.6321.1.2.3.3.98.3.10NodeiesSysMacFilter
1.3.6.1.4.1.6321.1.2.3.3.98.3.10.1TableiesMacFilterStatusTablenot-accessiblecurrentThis table includes the status of mac filtering for each port.
1.3.6.1.4.1.6321.1.2.3.3.98.3.10.1.1RowiesMacFilterStatusEntrynot-accessiblecurrentAn entry in iesMacFilterStatusTable.
1.3.6.1.4.1.6321.1.2.3.3.98.3.10.1.1.1ColumniesMacFilterStatusEnableread-writecurrentThe option defines if the port enables mac filtering.
1.3.6.1.4.1.6321.1.2.3.3.98.3.10.2ScalariesMaxNumberOfMacFiltersread-onlycurrentThe max number of the mac filters in the system.
1.3.6.1.4.1.6321.1.2.3.3.98.3.10.3ScalariesMaxNumberOfMacFiltersPerPortread-onlycurrentThe max number of the mac filters for each port.
1.3.6.1.4.1.6321.1.2.3.3.98.3.10.4ScalariesCurrNumberOfMacFiltersread-onlycurrentThe current number of the mac filters in the system.
1.3.6.1.4.1.6321.1.2.3.3.98.3.10.5TableiesMacFilterTablenot-accessiblecurrentA table that contains the mac filtering information.
1.3.6.1.4.1.6321.1.2.3.3.98.3.10.5.1RowiesMacFilterEntrynot-accessiblecurrentThe entry of iesMacFilterTable.
1.3.6.1.4.1.6321.1.2.3.3.98.3.10.5.1.1ColumniesMacFilterMacAddrread-onlycurrentThe mac address which can pass through the port.
1.3.6.1.4.1.6321.1.2.3.3.98.3.10.5.1.2ColumniesMacFilterRowStatusread-createcurrentThe row status of the entry.
1.3.6.1.4.1.6321.1.2.3.3.98.3.11NodeiesSysPacketFilter
1.3.6.1.4.1.6321.1.2.3.3.98.3.11.1TableiesPacketFilterTablenot-accessiblecurrentThis table includes packet filtering for each port.
1.3.6.1.4.1.6321.1.2.3.3.98.3.11.1.1RowiesPacketFilterEntrynot-accessiblecurrentAn entry in iesPacketFilterTable.
1.3.6.1.4.1.6321.1.2.3.3.98.3.11.1.1.1ColumniesPacketFilterread-writecurrentThe packet filter. The semantic for each bit is: Bit 1: accept all Bit 2: accept PPPoE only Bit 3: reject ARP Bit 4: reject DHCP Bit 5: reject EAPOL Bit 6: rej…
1.3.6.1.4.1.6321.1.2.3.3.98.3.12NodeiesSysMacCountFilter
1.3.6.1.4.1.6321.1.2.3.3.98.3.12.1TableiesMacCountFilterTablenot-accessiblecurrentThis table includes mac count filtering for each port.
1.3.6.1.4.1.6321.1.2.3.3.98.3.12.1.1RowiesMacCountFilterEntrynot-accessiblecurrentAn entry in iesMacCountFilterTable.
1.3.6.1.4.1.6321.1.2.3.3.98.3.12.1.1.1ColumniesMacCountFilterStatusread-writecurrentThe option defines if the port enables mac count filtering.
1.3.6.1.4.1.6321.1.2.3.3.98.3.12.1.1.2ColumniesMacCountFilterCountread-writecurrentThe number of mac addresses which can pass through the port.
1.3.6.1.4.1.6321.1.2.3.3.98.3.13NodeiesSysMulticastGroup
1.3.6.1.4.1.6321.1.2.3.3.98.3.13.1ScalariesMaxNumberOfMulticastGroupsread-onlycurrentThe max number of static multicast groups in the system.
1.3.6.1.4.1.6321.1.2.3.3.98.3.13.2TableiesMulticastGroupTablenot-accessiblecurrentA table that contains static multicast group information.
1.3.6.1.4.1.6321.1.2.3.3.98.3.13.2.1RowiesMulticastGroupEntrynot-accessiblecurrentThe entry of multicast group table.
1.3.6.1.4.1.6321.1.2.3.3.98.3.13.2.1.1ColumniesMulticastGroupVidread-onlycurrentThe multicast VLAN of the group.
1.3.6.1.4.1.6321.1.2.3.3.98.3.13.2.1.2ColumniesMulticastGroupMacAddrread-onlycurrentThe multicast MAC address of the group.
1.3.6.1.4.1.6321.1.2.3.3.98.3.13.2.1.3ColumniesMulticastGroupPortsread-createcurrentThe port list which specifies the ports joining the multicast group.
1.3.6.1.4.1.6321.1.2.3.3.98.3.13.2.1.4ColumniesMulticastGroupRowStatusread-createcurrentThe row status of the multicast group entry.
1.3.6.1.4.1.6321.1.2.3.3.98.3.14NodeiesSysIgmpFilter
1.3.6.1.4.1.6321.1.2.3.3.98.3.14.1ScalariesMaxNumberOfIgmpFiltersread-onlycurrentThe max number of IGMP filters in the system.
1.3.6.1.4.1.6321.1.2.3.3.98.3.14.2TableiesIgmpFilterTablenot-accessiblecurrentA table that contains IGMP filters.
1.3.6.1.4.1.6321.1.2.3.3.98.3.14.2.1RowiesIgmpFilterEntrynot-accessiblecurrentThe entry of IGMP filter table.
1.3.6.1.4.1.6321.1.2.3.3.98.3.14.2.1.1ColumniesIgmpFilterNameread-onlycurrentThe IGMP filter name.
1.3.6.1.4.1.6321.1.2.3.3.98.3.14.2.1.2ColumniesIgmpFilterIndexread-onlycurrentThe index which specifies the filter rule.
1.3.6.1.4.1.6321.1.2.3.3.98.3.14.2.1.3ColumniesIgmpFilterStartIpread-createcurrentThe start IP of the filter rule.
1.3.6.1.4.1.6321.1.2.3.3.98.3.14.2.1.4ColumniesIgmpFilterEndIpread-createcurrentThe end IP of the filter rule.
1.3.6.1.4.1.6321.1.2.3.3.98.3.14.2.1.5ColumniesIgmpFilterRowStatusread-createcurrentThe row status of the IGMP filter entry.
1.3.6.1.4.1.6321.1.2.3.3.98.3.14.3TableiesIgmpFilterPortTablenot-accessiblecurrentThis table specifies the IGMP filter of the port.
1.3.6.1.4.1.6321.1.2.3.3.98.3.14.3.1RowiesIgmpFilterPortEntrynot-accessiblecurrentAn entry in iesIgmpFilterPortTable.
1.3.6.1.4.1.6321.1.2.3.3.98.3.14.3.1.1ColumniesIgmpFilterPortFilterread-writecurrentThe IGMP filter of the port.
1.3.6.1.4.1.6321.1.2.3.3.98.4NodeiesL2SW
1.3.6.1.4.1.6321.1.2.3.3.98.4.1ScalariesIGMPSnoopingEnabledread-writecurrentA flag indicating whether IGMP snooping function is enabled or not.
1.3.6.1.4.1.6321.1.2.3.3.98.4.2ScalariesManagementVLANIdread-writecurrentThe VLAN ID for management.
1.3.6.1.4.1.6321.1.2.3.3.98.4.3ScalariesMaxNumOfStaticVlansread-onlycurrentThe maximum number of static VLANs supported by the system.
1.3.6.1.4.1.6321.1.2.3.3.98.4.4ScalariesMaxNumOfTrunkGroupsread-onlycurrentThe maximum number of trunk groups.
1.3.6.1.4.1.6321.1.2.3.3.98.4.5TableiesTrunkGroupTablenot-accessiblecurrentA table that contains trunk group configuration.
1.3.6.1.4.1.6321.1.2.3.3.98.4.5.1RowiesTrunkGroupEntrynot-accessiblecurrentThe entry of trunk group table
1.3.6.1.4.1.6321.1.2.3.3.98.4.5.1.1ColumniesTrunkGroupIdread-onlycurrentThe ID of the trunk group
1.3.6.1.4.1.6321.1.2.3.3.98.4.5.1.2ColumniesTrunkGroupNameread-createcurrentThe name of the trunk group
1.3.6.1.4.1.6321.1.2.3.3.98.4.5.1.3ColumniesTrunkGroupPortsread-createcurrentThe port list of the trunk group
1.3.6.1.4.1.6321.1.2.3.3.98.4.5.1.4ColumniesTrunkGroupRowStatusread-createcurrentThe row status of the trunk group entry
1.3.6.1.4.1.6321.1.2.3.3.98.4.6ScalariesPortIsolationEnableread-writecurrentA flag indicating whether VLAN port isolation function is enabled or not.
1.3.6.1.4.1.6321.1.2.3.3.98.4.7ScalariesRSTPEnableread-writecurrentEnable/Disable RSTP.
1.3.6.1.4.1.6321.1.2.3.3.98.4.8ScalariesSwitchModeread-writecurrentSwitch DSLAM's operatrion Mode.
MIB Viewer