E7-Calix-MIB

119 objects

Top-level infrastructure for the Calix E7, E5-400, and E5-312 products, except for Fault Management.

Imported Objects

CALIX-PRODUCT-MIB	e7 e7Modules
E7-TC	E7AdminStatus E7CardType E7PowerLevel E7SnmpVers
IF-MIB	ifIndex
SNMPv2-SMI	-- not used yet Counter64 Integer32 IpAddress mib-2
SNMPv2-TC	-- not used yet DisplayString -- not used yet MacAddress RowStatus

OID	Name	Access	Status	Description
1.3.6.1.4.1.6321.1.2.2.1.1	Identitye7ResourceModule			Top-level infrastructure for the Calix E7, E5-400, and E5-312 products, except for Fault Management.
1.3.6.1.4.1.6321.1.2.2.2	Nodee7Resource
1.3.6.1.4.1.6321.1.2.2.2.1	Nodee7NodeResource
1.3.6.1.4.1.6321.1.2.2.2.1.6	Nodee7CardGroup
1.3.6.1.4.1.6321.1.2.2.2.1.6.1	Tablee7CardTable	not-accessible	current	Contains Card entries
1.3.6.1.4.1.6321.1.2.2.2.1.6.1.1	Rowe7CardEntry	not-accessible	current	List of attributes related to Card
1.3.6.1.4.1.6321.1.2.2.2.1.6.1.1.1	Columne7CardBank	not-accessible	current	Bank number
1.3.6.1.4.1.6321.1.2.2.2.1.6.1.1.2	Columne7CardIndex	not-accessible	current	Slot number
1.3.6.1.4.1.6321.1.2.2.2.1.6.1.1.3	Columne7CardRowStatus	read-create	current	Controls creation & deletion of table entries. Only active(get), createAndGo(set), and destroy(set) are supported.
1.3.6.1.4.1.6321.1.2.2.2.1.6.1.1.4	Columne7CardAdminStatus	read-create	current	Administrative status
1.3.6.1.4.1.6321.1.2.2.2.1.6.1.1.5	Columne7CardProvType	read-create	current	Provisioned card type
1.3.6.1.4.1.6321.1.2.2.2.1.6.1.1.6	Columne7CardActualType	read-only	current	Actual card type
1.3.6.1.4.1.6321.1.2.2.2.1.6.1.1.7	Columne7CardSoftwareVersion	read-only	current	Running software version, dotted string notation
1.3.6.1.4.1.6321.1.2.2.2.1.6.1.1.8	Columne7CardSerialNumber	read-only	current	Ascii Serial number for card
1.3.6.1.4.1.6321.1.2.2.2.1.6.1.1.9	Columne7CardCurrentPowerLevel	read-only	current	Current power level for card
1.3.6.1.4.1.6321.1.2.2.2.1.6.1.1.10	Columne7CardCleiCode	read-only	current	Ascii CLEI code for card
1.3.6.1.4.1.6321.1.2.2.2.1.6.1.1.11	Columne7CardPartNumber	read-only	current	Ascii part number
1.3.6.1.4.1.6321.1.2.2.2.1.6.1.1.12	Columne7CardStartMacRange	read-only	current	Start of MAC range (ascii)
1.3.6.1.4.1.6321.1.2.2.2.1.6.1.1.13	Columne7CardEndMacRange	read-only	current	End of MAC range (ascii)
1.3.6.1.4.1.6321.1.2.2.2.1.6.1.1.14	Columne7CardHardwareRevision	read-only	current	Hardware revision, dotted string notation
1.3.6.1.4.1.6321.1.2.2.2.1.6.2	Scalare7CardTableEnd	read-only	current	denotes the end of the e7CardTable (for getnext)
1.3.6.1.4.1.6321.1.2.2.2.1.7	Nodee7SystemGroup
1.3.6.1.4.1.6321.1.2.2.2.1.7.1	Scalare7SystemId	read-create	current	Unique name of the system
1.3.6.1.4.1.6321.1.2.2.2.1.7.2	Scalare7SystemLocation	read-create	current	Location of the system
1.3.6.1.4.1.6321.1.2.2.2.1.7.3	Scalare7SystemAutoUpgrade	read-create	current	Auto upgrade out-of-rev cards on arrival
1.3.6.1.4.1.6321.1.2.2.2.1.7.4	Scalare7SystemTelnetServer	read-create	current	Enable CLI access via telnet (in addition to ssh)
1.3.6.1.4.1.6321.1.2.2.2.1.7.5	Scalare7SystemUnsecuredWeb	read-create	current	Enable unsecured web-access (non-ssh)
1.3.6.1.4.1.6321.1.2.2.2.1.7.6	Scalare7SystemPasswordExpiry	read-create	current	Craft user password expiry, in days
1.3.6.1.4.1.6321.1.2.2.2.1.7.7	Scalare7SystemDnsPrimary	read-create	current	IP address of primary DNS server
1.3.6.1.4.1.6321.1.2.2.2.1.7.8	Scalare7SystemDnsSecondary	read-create	current	IP address of secondary DNS server
1.3.6.1.4.1.6321.1.2.2.2.1.7.9	Scalare7SystemTimezone	read-create	current	Timezone for system
1.3.6.1.4.1.6321.1.2.2.2.1.7.10	Scalare7SystemChassisSerialNumber	read-create	current	Chassis serial number
1.3.6.1.4.1.6321.1.2.2.2.1.7.11	Scalare7SystemChassisMacAddress	read-create	current	Chassis MAC address
1.3.6.1.4.1.6321.1.2.2.2.1.7.12	Scalare7SystemTime	read-create	current	system time
1.3.6.1.4.1.6321.1.2.2.2.1.7.13	Scalare7SystemDate	read-create	current	system date
1.3.6.1.4.1.6321.1.2.2.2.1.8	Nodee7TrapDestGroup
1.3.6.1.4.1.6321.1.2.2.2.1.8.1	Tablee7TrapDestTable	not-accessible	current	Contains SNMP Trap Dest entries
1.3.6.1.4.1.6321.1.2.2.2.1.8.1.1	Rowe7TrapDestEntry	not-accessible	current	List of attributes related to SNMP Trap Dest
1.3.6.1.4.1.6321.1.2.2.2.1.8.1.1.1	Columne7TrapDestIndex	not-accessible	current	trap index
1.3.6.1.4.1.6321.1.2.2.2.1.8.1.1.2	Columne7TrapDestRowStatus	read-create	current	Controls creation & deletion of table entries. Only active(get), createAndGo(set), and destroy(set) are supported.
1.3.6.1.4.1.6321.1.2.2.2.1.8.1.1.3	Columne7TrapDestAdminStatus	read-create	current	Administrative status
1.3.6.1.4.1.6321.1.2.2.2.1.8.1.1.4	Columne7TrapDestIpAddress	read-create	current	destination IP address
1.3.6.1.4.1.6321.1.2.2.2.1.8.1.1.5	Columne7TrapDestPortNumber	read-create	current	destination UDP port number
1.3.6.1.4.1.6321.1.2.2.2.1.8.1.1.6	Columne7TrapDestSnmpVers	read-create	current	v2c or v3 trap type
1.3.6.1.4.1.6321.1.2.2.2.1.8.1.1.7	Columne7TrapDestV3User	read-create	current	user used in v3 traps
1.3.6.1.4.1.6321.1.2.2.2.1.8.1.1.8	Columne7TrapDestCommunity	read-create	current	community string used in v2c traps
1.3.6.1.4.1.6321.1.2.2.2.1.9	Nodee7PortGroup
1.3.6.1.4.1.6321.1.2.2.2.1.9.1	Nodee7VdslPortGroup
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.1	Tablee7VdslPortTable	not-accessible	current	Contains Vdsl port entries
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.1.1	Rowe7VdslPortEntry	not-accessible	current	List of attributes related to Vdsl Port entries
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.1.1.1	Columne7VdslPortRowStatus	read-create	current	Controls creation & deletion of table entries. Only active(get), createAndGo(set), and destroy(set) are supported.
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.1.1.2	Columne7VdslPortAdminStatus	read-create	current	Administrative status
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.1.1.3	Columne7VdslPortCurrTxRate	read-only	current	Actual transmit data rate this port
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.1.1.4	Columne7VdslPortCurrRxRate	read-only	current	Actual receive data rate this port
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.1.1.5	Columne7VdslPortStatsProtocol	read-create	current	Administrative status
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.1.1.6	Columne7VdslPortLineState	read-create	current	Line operational status
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.2	Tablee7VdslRateTable	not-accessible	current	Contains Vdsl data rate entries
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.2.1	Rowe7VdslRateEntry	not-accessible	current	List of attributes related to Vdsl Rate entries
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.2.1.1	Columne7VdslRateRowStatus	read-create	current	Controls creation & deletion of table entries. Only active(get), createAndGo(set), and destroy(set) are supported.
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.2.1.2	Columne7VdslRateAdminStatus	read-create	current	Administrative status
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.2.1.3	Columne7VdslRateProvDataRateUs	read-only	current	Provisioned data rate upstream
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.2.1.4	Columne7VdslRateProvDataRateDs	read-only	current	Provisioned data rate downstream
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.3	Tablee7VdslPhysTable	not-accessible	current	Contains Vdsl physical entries
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.3.1	Rowe7VdslPhysEntry	not-accessible	current	List of attributes related to Vdsl physical entries
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.3.1.1	Columne7VdslPhysSide	not-accessible	current	Identifies whether the transceiver is downstream or upstream.
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.3.1.2	Columne7VdslPhysCurrSnrMargin	read-only	current	Noise Margin as seen by this Vtu with respect to its received signal.
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.3.1.3	Columne7VdslPhysCurrAtn	read-only	current	Measured difference in the total power transmitted by the peer Vtu and the total power received by this Vtu.
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.3.1.4	Columne7VdslPhysCurrOutputPwr	read-only	current	Measured total output power transmitted by this VTU. This is the measurement that was reported during the last activation sequence.
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.3.1.5	Columne7VdslPhysInterleaveDelay	read-only	current	Actual interleaving delay (in milliseconds).
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.3.1.6	Columne7VdslPhysImpulseNoiseProtection	read-only	current	Actual impulse noise protection.
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.3.1.7	Columne7VdslPhysTransmissionMode	read-only	current	Actual transmission mode.
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.4	Tablee7VdslPortCfgTable	not-accessible	current	Contains Vdsl port configuration entries
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.4.1	Rowe7VdslPortCfgEntry	not-accessible	current	List of attributes related to Vdsl Port configuration entries
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.4.1.1	Columne7VdslPortCfgServiceType	read-write	current	VDSL port configured service type.
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.4.1.2	Columne7VdslPortCfgPathLatency	read-write	current	VDSL port configured latency.
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.4.1.3	Columne7VdslPortCfgVdslProfile	read-write	current	VDSL port configured profile.
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.4.1.4	Columne7VdslPortCfgDsMinRate	read-write	current	VDSL port configured downstream minimum rate.
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.4.1.5	Columne7VdslPortCfgDsMaxRate	read-write	current	VDSL port configured downstream maximum rate.
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.4.1.6	Columne7VdslPortCfgUsMinRate	read-write	current	VDSL port configured upstream minimum rate.
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.4.1.7	Columne7VdslPortCfgUsMaxRate	read-write	current	VDSL port configured upstream maximum rate.
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.4.1.8	Columne7VdslPortCfgDsMinInp	read-write	current	VDSL port configured downstream minimum impulse noise protection.
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.4.1.9	Columne7VdslPortCfgUsMinInp	read-write	current	VDSL port configured upstream minimum impulse noise protection.
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.4.1.10	Columne7VdslPortCfgDsInterleaveMaxLatency	read-write	current	VDSL port configured downstream interleave maximum latency. A value of 0x7FFFFFFF (2147483647) indicates the setting equal to 'auto'.
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.4.1.11	Columne7VdslPortCfgUsInterleaveMaxLatency	read-write	current	VDSL port configured upstream interleave maximum latency.
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.4.1.12	Columne7VdslPortCfgDsMinSnr	read-write	current	VDSL port configured downstream minimum SNR.
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.4.1.13	Columne7VdslPortCfgDsMaxSnr	read-write	current	VDSL port configured downstream maximum SNR.
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.4.1.14	Columne7VdslPortCfgDsTargetSnr	read-write	current	VDSL port configured downstream target SNR.
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.4.1.15	Columne7VdslPortCfgUsMinSnr	read-write	current	VDSL port configured upstream minimum SNR.
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.4.1.16	Columne7VdslPortCfgUsMaxSnr	read-write	current	VDSL port configured upstream maximum SNR.
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.4.1.17	Columne7VdslPortCfgUsTargetSnr	read-write	current	VDSL port configured upstream target SNR.
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.4.1.18	Columne7VdslPortCfgPsdMask	read-write	current	VDSL port configured PSD mask.
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.4.1.19	Columne7VdslPortCfgLastTemplate	read-create	current	VDSL port configured last template name.
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.5	Tablee7VdslPortCfgTemplateTable	not-accessible	current	Contains Vdsl port configuration template entries
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.5.1	Rowe7VdslPortCfgTemplateEntry	not-accessible	current	List of attributes related to Vdsl Port configuration template entries
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.5.1.1	Columne7VdslPortCfgTemplateIndex	read-write	current	VDSL port configured template index.
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.5.1.2	Columne7VdslPortCfgTemplateName	read-create	current	VDSL port configured template name.
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.5.1.3	Columne7VdslPortCfgTemplateServiceType	read-write	current	VDSL port configured service type. If template attribute is not set, value reported will be 0x7FFFFFFF (2147483647).
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.5.1.4	Columne7VdslPortCfgTemplatePathLatency	read-write	current	VDSL port configured latency. If template attribute is not set, value reported will be 0x7FFFFFFF (2147483647).
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.5.1.5	Columne7VdslPortCfgTemplateVdslProfile	read-write	current	VDSL port configured profile. If template attribute is not set, value reported will be 0x7FFFFFFF (2147483647).
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.5.1.6	Columne7VdslPortCfgTemplateDsMinRate	read-write	current	VDSL port configured downstream minimum rate. If template attribute is not set, value reported will be 0x7FFFFFFF (2147483647).
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.5.1.7	Columne7VdslPortCfgTemplateDsMaxRate	read-write	current	VDSL port configured downstream maximum rate. If template attribute is not set, value reported will be 0x7FFFFFFF (2147483647).
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.5.1.8	Columne7VdslPortCfgTemplateUsMinRate	read-write	current	VDSL port configured upstream minimum rate. If template attribute is not set, value reported will be 0x7FFFFFFF (2147483647).
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.5.1.9	Columne7VdslPortCfgTemplateUsMaxRate	read-write	current	VDSL port configured upstream maximum rate. If template attribute is not set, value reported will be 0x7FFFFFFF (2147483647).
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.5.1.10	Columne7VdslPortCfgTemplateDsMinInp	read-write	current	VDSL port configured downstream minimum impulse noise protection. If template attribute is not set, value reported will be 0x7FFFFFFF (2147483647).
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.5.1.11	Columne7VdslPortCfgTemplateUsMinInp	read-write	current	VDSL port configured upstream minimum impulse noise protection. If template attribute is not set, value reported will be 0x7FFFFFFF (2147483647).
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.5.1.12	Columne7VdslPortCfgTemplateDsInterleaveMaxLatency	read-write	current	VDSL port configured downstream interleave maximum latency. A value of 0x7FFFFFFF (2147483647) indicates the setting equal to 'auto'.
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.5.1.13	Columne7VdslPortCfgTemplateUsInterleaveMaxLatency	read-write	current	VDSL port configured upstream interleave maximum latency. If template attribute is not set, value reported will be 0x7FFFFFFF (2147483647).
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.5.1.14	Columne7VdslPortCfgTemplateDsMinSnr	read-write	current	VDSL port configured downstream minimum SNR. If template attribute is not set, value reported will be 0x7FFFFFFF (2147483647).
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.5.1.15	Columne7VdslPortCfgTemplateDsMaxSnr	read-write	current	VDSL port configured downstream maximum SNR. If template attribute is not set, value reported will be 0x7FFFFFFF (2147483647).
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.5.1.16	Columne7VdslPortCfgTemplateDsTargetSnr	read-write	current	VDSL port configured downstream target SNR. If template attribute is not set, value reported will be 0x7FFFFFFF (2147483647).
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.5.1.17	Columne7VdslPortCfgTemplateUsMinSnr	read-write	current	VDSL port configured upstream minimum SNR. If template attribute is not set, value reported will be 0x7FFFFFFF (2147483647).
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.5.1.18	Columne7VdslPortCfgTemplateUsMaxSnr	read-write	current	VDSL port configured upstream maximum SNR. If template attribute is not set, value reported will be 0x7FFFFFFF (2147483647).
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.5.1.19	Columne7VdslPortCfgTemplateUsTargetSnr	read-write	current	VDSL port configured upstream target SNR. If template attribute is not set, value reported will be 0x7FFFFFFF (2147483647).
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.5.1.20	Columne7VdslPortCfgTemplatePsdMask	read-write	current	VDSL port configured PSD mask. If template attribute is not set, value reported will be 0x7FFFFFFF (2147483647).
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.6	Tablee7VdslPortPerfIntervalTable	not-accessible	current	Contains Vdsl port performance monitoring entries
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.6.1	Rowe7VdslPortPerfIntervalEntry	not-accessible	current	List of attributes related to Vdsl Port performance monitoring entries
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.6.1.1	Columne7VdslPortPerfIntervalPhysSide	not-accessible	current	VDSL port performance interval phyical side.
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.6.1.2	Columne7VdslPortPerfIntervalNumber	not-accessible	current	VDSL port performance interval number.
1.3.6.1.4.1.6321.1.2.2.2.1.9.1.6.1.3	Columne7VdslPortPerfIntervalUAS	read-only	current	VDSL port performance interval unavailable seconds.

MIB Viewer

What's a MIB?

What's SNMP?

What's an OID?

SNMP Fundamentals

Using net-snmp

Configuring SNMP on Cisco devices

Configuring SNMP on Fortinet devices

Understanding MIBs

Troubleshooting SNMP

Searching OIDs

Modem/MTA bootfiles

DOCSIS Monitoring

Linux snmpd passthrough

E7-Calix-MIB

Bulk Translate

Vendor MIBs