MIB Viewer

EATON-ATS2-MIB

99 objects
The MIB module for Eaton ATS (Automatic Transfer Switch).
Imported Objects
EATON-OIDSsts
SNMPv2-SMICounter32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE
SNMPv2-TCDisplayString TEXTUAL-CONVENTION
OIDNameAccessStatusDescription
1.3.6.1.4.1.534.10.2Identityats2The MIB module for Eaton ATS (Automatic Transfer Switch).
1.3.6.1.4.1.534.10.2.1Nodeats2Ident
1.3.6.1.4.1.534.10.2.1.1Scalarats2IdentManufacturerread-onlycurrentThe manufacturer name.
1.3.6.1.4.1.534.10.2.1.2Scalarats2IdentModelread-onlycurrentDevice model name.
1.3.6.1.4.1.534.10.2.1.3Scalarats2IdentFWVersionread-onlycurrentDevice F/W version.
1.3.6.1.4.1.534.10.2.1.4Scalarats2IdentReleaseread-onlycurrentThe released date.
1.3.6.1.4.1.534.10.2.1.5Scalarats2IdentSerialNumberread-onlycurrentDevice serial number
1.3.6.1.4.1.534.10.2.1.6Scalarats2IdentPartNumberread-onlycurrentDevice part number
1.3.6.1.4.1.534.10.2.1.7Scalarats2IdentAgentVersionread-onlycurrentCommunication Card F/W version
1.3.6.1.4.1.534.10.2.2Nodeats2Measure
1.3.6.1.4.1.534.10.2.2.1Nodeats2Input
1.3.6.1.4.1.534.10.2.2.1.1Scalarats2InputDephasingread-onlycurrentThe dephasing in between Source 1 and Source 2.
1.3.6.1.4.1.534.10.2.2.2Tableats2InputTablenot-accessiblecurrentThe table of input information.
1.3.6.1.4.1.534.10.2.2.2.1Rowats2InputEntrynot-accessiblecurrentThe input information of each source input: <node>.1 source1 <node>.2 source2
1.3.6.1.4.1.534.10.2.2.2.1.1Columnats2InputIndexread-onlycurrentIndex to input.
1.3.6.1.4.1.534.10.2.2.2.1.2Columnats2InputVoltageread-onlycurrentThe input voltage in front of relay. Units are 0.1 V.
1.3.6.1.4.1.534.10.2.2.2.1.3Columnats2InputFrequencyread-onlycurrentThe input frequency. Units are 0.1 Hz.
1.3.6.1.4.1.534.10.2.2.3Nodeats2Output
1.3.6.1.4.1.534.10.2.2.3.1Scalarats2OutputVoltageread-onlycurrentThe output voltage. Units are 0.1 V.
1.3.6.1.4.1.534.10.2.2.3.2Scalarats2OutputCurrentread-onlycurrentThe output current. Units are 0.1 A.
1.3.6.1.4.1.534.10.2.2.4Scalarats2OperationModeread-onlycurrentThe operation mode.
1.3.6.1.4.1.534.10.2.3Nodeats2Status
1.3.6.1.4.1.534.10.2.3.1Nodeats2InputStatus
1.3.6.1.4.1.534.10.2.3.1.1Scalarats2InputStatusDephasingread-onlycurrentThe dephasing status in between Source 1 and Source 2.
1.3.6.1.4.1.534.10.2.3.2Tableats2InputStatusTablenot-accessiblecurrentThe table of input status.
1.3.6.1.4.1.534.10.2.3.2.1Rowats2InputStatusEntrynot-accessiblecurrentThe input flow status: <node>.1 source1 <node>.2 source2
1.3.6.1.4.1.534.10.2.3.2.1.1Columnats2InputStatusIndexread-onlycurrentIndex of input entry.
1.3.6.1.4.1.534.10.2.3.2.1.2Columnats2InputStatusFrequencyread-onlycurrentThe status of input frequency.
1.3.6.1.4.1.534.10.2.3.2.1.3Columnats2InputStatusGoodread-onlycurrentThe summarized status of input AC flow.
1.3.6.1.4.1.534.10.2.3.2.1.4Columnats2InputStatusInternalFailureread-onlycurrentThe internal fault status of input.
1.3.6.1.4.1.534.10.2.3.2.1.5Columnats2InputStatusVoltageread-onlycurrentThe status of input voltage.
1.3.6.1.4.1.534.10.2.3.2.1.6Columnats2InputStatusUsedread-onlycurrentThe status of input relay.
1.3.6.1.4.1.534.10.2.3.3Nodeats2OutputStatus
1.3.6.1.4.1.534.10.2.3.3.1Scalarats2StatusInternalFailureread-onlycurrentOutput fault.
1.3.6.1.4.1.534.10.2.3.3.2Scalarats2StatusOutputread-onlycurrentOutput powered status.
1.3.6.1.4.1.534.10.2.3.3.3Scalarats2StatusOverloadread-onlycurrentThe output overload status.
1.3.6.1.4.1.534.10.2.3.3.4Scalarats2StatusOverTemperatureread-onlycurrentThe over temperature status.
1.3.6.1.4.1.534.10.2.3.3.5Scalarats2StatusShortCircuitread-onlycurrentShort circuit status.
1.3.6.1.4.1.534.10.2.3.3.6Scalarats2StatusCommunicationLostread-onlycurrentCommunication failure status.
1.3.6.1.4.1.534.10.2.3.3.7Scalarats2StatusConfigurationFailureread-onlycurrentConfiguration failure status.
1.3.6.1.4.1.534.10.2.4Nodeats2Config
1.3.6.1.4.1.534.10.2.4.1Nodeats2ConfigTime
1.3.6.1.4.1.534.10.2.4.1.1Scalarats2ConfigTimeRTCread-writecurrentClock value. This could be from either a real-time clock (in which case it is likely writeable) or from a time server via NTP (probably read-only). (since 1/1/…
1.3.6.1.4.1.534.10.2.4.1.2Scalarats2ConfigTimeTextDateread-onlycurrentThe present date in MM/DD/YYYY text format.
1.3.6.1.4.1.534.10.2.4.1.3Scalarats2ConfigTimeTextTimeread-onlycurrentThe present time in hh:mm:ss text format.
1.3.6.1.4.1.534.10.2.4.2Scalarats2ConfigInputVoltageRatingread-onlycurrentThe input voltage rating. Unit is 1 V.
1.3.6.1.4.1.534.10.2.4.3Scalarats2ConfigInputFrequencyRatingread-onlycurrentThe input frequency rating. Unit is 1 Hz.
1.3.6.1.4.1.534.10.2.4.4Scalarats2ConfigOutputVoltageread-writecurrentThe output voltage config. Unit is 1 V.
1.3.6.1.4.1.534.10.2.4.5Scalarats2ConfigPreferredread-writecurrentThe preferred source.
1.3.6.1.4.1.534.10.2.4.6Scalarats2ConfigSensitivityread-writecurrentThe AC Blackout Sensitivity.
1.3.6.1.4.1.534.10.2.4.7Scalarats2ConfigTransferModeread-writecurrentbehavior configuration when transfering from one source to other source not synchronized.
1.3.6.1.4.1.534.10.2.4.8Scalarats2ConfigTransferTestread-onlycurrentThe status of transfer test.
1.3.6.1.4.1.534.10.2.4.9Scalarats2ConfigBrownoutLowread-onlycurrentSetting of input brownout low voltage. Unit is 1 V.
1.3.6.1.4.1.534.10.2.4.10Scalarats2ConfigBrownoutLowDeratedread-onlycurrentSetting of input brownout low derated voltage. Unit is 1 V.
1.3.6.1.4.1.534.10.2.4.11Scalarats2ConfigBrownoutHighread-onlycurrentSetting of input brownout high voltage. Unit is 1 V.
1.3.6.1.4.1.534.10.2.4.12Scalarats2ConfigHysteresisVoltageread-onlycurrentHysteresis between loss point and comeback point. Unit is 1 V.
1.3.6.1.4.1.534.10.2.5Nodeats2Environment
1.3.6.1.4.1.534.10.2.5.1Scalarats2EnvRemoteTempread-onlycurrentThe reading of an EMP's temperature sensor.
1.3.6.1.4.1.534.10.2.5.2Scalarats2EnvRemoteHumidityread-onlycurrentThe reading of an EMP's humidity sensor.
1.3.6.1.4.1.534.10.2.5.3Scalarats2EnvNumContactsread-onlycurrentThe number of Contacts in the ats2ContactSenseTable. This object indicates the number of rows in the ats2ContactSenseTable.
1.3.6.1.4.1.534.10.2.5.4Tableats2ContactSenseTablenot-accessiblecurrentA list of Contact Sensing table entries. The number of entries is given by the value of ats2EnvNumContacts.
1.3.6.1.4.1.534.10.2.5.4.1Rowats2ContactsTableEntrynot-accessiblecurrentAn entry containing information applicable to a particular Contact input.
1.3.6.1.4.1.534.10.2.5.4.1.1Columnats2ContactIndexread-onlycurrentThe Contact identifier; identical to the Contact Number. This object is not-accessible to MIB browsers, but had to be changed to read-only to satisfy SMIv2 syn…
1.3.6.1.4.1.534.10.2.5.4.1.2Columnats2ContactTyperead-writecurrentThe normal state for this contact. The 'other' (not 'Normally') state is the Active state for generating the ats2tdContactActiveNotice trap. If anyChange(3) is…
1.3.6.1.4.1.534.10.2.5.4.1.3Columnats2ContactStateread-onlycurrentThe current state of the Contact input; the value is based on the open/closed input state and the setting for ats2ContactType. When entering the openWithNotice…
1.3.6.1.4.1.534.10.2.5.4.1.4Columnats2ContactDescrread-writecurrentA label identifying the Contact. This object should be set by the administrator.
1.3.6.1.4.1.534.10.2.5.5Scalarats2EnvRemoteTempLowerLimitread-writecurrentThe Lower Limit of the EMP temperature; if ats2EnvRemoteTemp falls below this value, the ats2RemoteTempBad alarm will occur.
1.3.6.1.4.1.534.10.2.5.6Scalarats2EnvRemoteTempUpperLimitread-writecurrentThe Upper Limit of the EMP temperature; if ats2EnvRemoteTemp rises above this value, the ats2RemoteTempBad alarm will occur. This value should be greater than …
1.3.6.1.4.1.534.10.2.5.7Scalarats2EnvRemoteHumidityLowerLimitread-writecurrentThe Lower Limit of the EMP humidity reading; if ats2EnvRemoteHumidity falls below this value, the ats2RemoteHumidityBad alarm will occur.
1.3.6.1.4.1.534.10.2.5.8Scalarats2EnvRemoteHumidityUpperLimitread-writecurrentThe Upper Limit of the EMP humidity reading; if ats2EnvRemoteHumidity rises above this value, the ats2RemoteHumidityBad alarm will occur. This value should be …
1.3.6.1.4.1.534.10.2.10Nodeats2Traps
1.3.6.1.4.1.534.10.2.10.1Notificationats2TrapCommunicationLostcurrentCommunication with the ATS failed.
1.3.6.1.4.1.534.10.2.10.2Notificationats2TrapCommunicationRecoveredcurrentCommunication with the ATS recovered.
1.3.6.1.4.1.534.10.2.10.3Notificationats2TrapOutputPoweredcurrentThe ATS powers the load.
1.3.6.1.4.1.534.10.2.10.4Notificationats2TrapOutputNotPoweredcurrentThe ATS does not powers the load.
1.3.6.1.4.1.534.10.2.10.5Notificationats2TrapOverloadcurrentThe ATS has sensed a critical overload.
1.3.6.1.4.1.534.10.2.10.6Notificationats2TrapNoOverLoadcurrentThe critical overload disappeared.
1.3.6.1.4.1.534.10.2.10.7Notificationats2TrapInternalFailurecurrentThe ATS has an internal failure (sum of all HW internal failure).
1.3.6.1.4.1.534.10.2.10.8Notificationats2TrapNoInternalFailurecurrentThe ATS internal failure disappeared.
1.3.6.1.4.1.534.10.2.10.9Notificationats2TrapSource1NormalcurrentSource 1 returns to normal.
1.3.6.1.4.1.534.10.2.10.10Notificationats2TrapSource1OutOfRangecurrentSource 1 out of range.
1.3.6.1.4.1.534.10.2.10.11Notificationats2TrapSource2NormalcurrentSource 2 returns to normal.
1.3.6.1.4.1.534.10.2.10.12Notificationats2TrapSource2OutOfRangecurrentSource 2 out of range.
1.3.6.1.4.1.534.10.2.10.13Notificationats2TrapSourceDesynchronizedcurrentSource 1 and Source 2 phase are desynchronized.
1.3.6.1.4.1.534.10.2.10.14Notificationats2TrapSourceSynchronizedcurrentSource 1 and Source 2 phase are synchronized.
1.3.6.1.4.1.534.10.2.10.15Notificationats2TrapOutputPoweredBySource1currentSource 1 powers the output.
1.3.6.1.4.1.534.10.2.10.16Notificationats2TrapOutputPoweredBySource2currentSource 2 powers the output.
1.3.6.1.4.1.534.10.2.10.20Notificationats2TrapRemoteTempLowcurrentThe remote temperature, ats2EnvRemoteTemp, has fallen below the set lower limit, ats2EnvRemoteTempLowerLimit.
1.3.6.1.4.1.534.10.2.10.21Notificationats2TrapRemoteTempHighcurrentThe remote temperature, ats2EnvRemoteTemp, has risen above the set upper limit, xupsEnvRemoteTempUpperLimit.
1.3.6.1.4.1.534.10.2.10.22Notificationats2TrapRemoteTempNormalcurrentThe remote temperature, ats2EnvRemoteTemp, is inside the interval defined by the lower limit and the upper limit.
1.3.6.1.4.1.534.10.2.10.23Notificationats2TrapRemoteHumidityLowcurrentThe remote humidity, ats2EnvRemoteHumidity, has fallen below the set lower limit, ats2EnvRemoteHumidityLowerLimit.
1.3.6.1.4.1.534.10.2.10.24Notificationats2TrapRemoteHumidityHighcurrentThe remote humidity, ats2EnvRemoteHumidity, has risen above the set upper limit, ats2EnvRemoteHumidityUpperLimit.
1.3.6.1.4.1.534.10.2.10.25Notificationats2TrapRemoteHumidityNormalcurrentThe remote humidity, ats2EnvRemoteHumidity, is inside the interval defined by the lower limit and the upper limit.
1.3.6.1.4.1.534.10.2.10.26Notificationats2Contact1ActiveNoticecurrentThe Contact 1 is in its Active state. The following are the situations that generate this trap: For ats2ContactType: and ats2ContactState: normallyOpen(1) and …
1.3.6.1.4.1.534.10.2.10.27Notificationats2Contact1InactiveNoticecurrentThe Contact 1 has changed to its Inactive state.
1.3.6.1.4.1.534.10.2.10.28Notificationats2Contact2ActiveNoticecurrentThe Contact 2 is in its Active state. The following are the situations that generate this trap: For ats2ContactType: and ats2ContactState: normallyOpen(1) and …
1.3.6.1.4.1.534.10.2.10.29Notificationats2Contact2InactiveNoticecurrentThe Contact 2 has changed to its Inactive state.
1.3.6.1.4.1.534.10.2.10.40Notificationats2TestTrapcurrentSent whenever the trap test feature is used by the communication card.
Type Definitions
NameSyntaxStatusDescription
UnixTimeStampCounter32currentUnix time stamp. Measured in seconds since January 1, 1970.
MIB Viewer