EATON-EMP-MIB
18 objects
The MIB module for Eaton Environment Monitoring Probes (EMP). The elements of this MIB have been extracted from the Eaton PowerMIB and placed in this separate MIB file for convenience. Copyright (C) Eaton Corporation (2007).
Imported Objects
| EATON-OIDS | xupsEnvironment |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.534.1.6.0 | IdentityeatonEMPMIB | The MIB module for Eaton Environment Monitoring Probes (EMP). The elements of this MIB have been extracted from the Eaton PowerMIB and placed in this separate … | ||
| 1.3.6.1.4.1.534.1.6.0.2 | NodeeatonEMPConformance | |||
| 1.3.6.1.4.1.534.1.6.0.2.1 | GroupeatonEMPGroup | current | The EMP scalar objects. | |
| 1.3.6.1.4.1.534.1.6.0.2.2 | GroupeatonEMPTableGroup | current | The EMP Contacts Table objects. | |
| 1.3.6.1.4.1.534.1.6.0.2.4 | ComplianceeatonEMPSimpleCompliance | current | The compliance statement for a normal EMP. | |
| 1.3.6.1.4.1.534.1.6.5 | ScalarxupsEnvRemoteTemp | read-only | current | The reading of an EMP's temperature sensor. |
| 1.3.6.1.4.1.534.1.6.6 | ScalarxupsEnvRemoteHumidity | read-only | current | The reading of an EMP's humidity sensor. |
| 1.3.6.1.4.1.534.1.6.7 | ScalarxupsEnvNumContacts | read-only | current | The number of Contacts in the xupsContactSenseTable. This object indicates the number of rows in the xupsContactSenseTable. |
| 1.3.6.1.4.1.534.1.6.8 | TablexupsContactSenseTable | not-accessible | current | A list of Contact Sensing table entries. The number of entries is given by the value of xupsEnvNumContacts. |
| 1.3.6.1.4.1.534.1.6.8.1 | RowxupsContactsTableEntry | not-accessible | current | An entry containing information applicable to a particular Contact input. |
| 1.3.6.1.4.1.534.1.6.8.1.1 | ColumnxupsContactIndex | read-only | current | The Contact identifier; identical to the Contact Number. This object is not-accessible to MIB browsers, but had to be changed to read-only to satisfy SMIv2 syn… |
| 1.3.6.1.4.1.534.1.6.8.1.2 | ColumnxupsContactType | read-write | current | The normal state for this contact. The 'other' (not 'Normally') state is the Active state for generating the xupstdContactActiveNotice trap. If anyChange(3) is… |
| 1.3.6.1.4.1.534.1.6.8.1.3 | ColumnxupsContactState | read-only | current | The current state of the Contact input; the value is based on the open/closed input state and the setting for xupsContactType. When entering the openWithNotice… |
| 1.3.6.1.4.1.534.1.6.8.1.4 | ColumnxupsContactDescr | read-write | current | A label identifying the Contact. This object should be set by the administrator. |
| 1.3.6.1.4.1.534.1.6.9 | ScalarxupsEnvRemoteTempLowerLimit | read-write | current | The Lower Limit of the EMP temperature; if xupsEnvRemoteTemp falls below this value, the xupsRemoteTempBad alarm will occur. |
| 1.3.6.1.4.1.534.1.6.10 | ScalarxupsEnvRemoteTempUpperLimit | read-write | current | The Upper Limit of the EMP temperature; if xupsEnvRemoteTemp rises above this value, the xupsRemoteTempBad alarm will occur. This value should be greater than … |
| 1.3.6.1.4.1.534.1.6.11 | ScalarxupsEnvRemoteHumidityLowerLimit | read-write | current | The Lower Limit of the EMP humidity reading; if xupsEnvRemoteHumidity falls below this value, the xupsRemoteHumidityBad alarm will occur. |
| 1.3.6.1.4.1.534.1.6.12 | ScalarxupsEnvRemoteHumidityUpperLimit | read-write | current | The Upper Limit of the EMP humidity reading; if xupsEnvRemoteHumidity rises above this value, the xupsRemoteHumidityBad alarm will occur. This value should be … |