EES-POWER-MIB
303 objects
Vertiv Tech Co. Ltd. Power MIB, revision E.
Imported Objects
| SNMPv2-SMI | Counter32 enterprises Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DateAndTime DisplayString TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6302 | Nodeees | |||
| 1.3.6.1.4.1.6302.2 | Nodeglobal | |||
| 1.3.6.1.4.1.6302.2.1 | IdentitypowerMIB | Vertiv Tech Co. Ltd. Power MIB, revision E. | ||
| 1.3.6.1.4.1.6302.2.1.1 | Nodeident | |||
| 1.3.6.1.4.1.6302.2.1.1.1 | ScalaridentManufacturer | read-only | current | The name of the equipment manufacturer. |
| 1.3.6.1.4.1.6302.2.1.1.2 | ScalaridentModel | read-only | current | The manufacturers model designation of the power system. |
| 1.3.6.1.4.1.6302.2.1.1.3 | ScalaridentControllerFirmwareVersion | read-only | current | The firmware (software) version of the controller. |
| 1.3.6.1.4.1.6302.2.1.1.4 | ScalaridentName | read-write | current | The name of the power plant. This object should be set by the administrator. |
| 1.3.6.1.4.1.6302.2.1.1.5 | ScalaridentSNMPCfgVer | read-only | current | The snmp cfg version |
| 1.3.6.1.4.1.6302.2.1.1.6 | ScalaridentControllerSerialNumber | read-only | current | The serial number of this controller |
| 1.3.6.1.4.1.6302.2.1.2 | Nodesystem | |||
| 1.3.6.1.4.1.6302.2.1.2.1 | ScalarsystemStatus | read-only | current | Status of the complete plant (highest alarm). One of (1) unknown - status has not yet been defined (2) normal - there are no activated alarms (3) warning - OA,… |
| 1.3.6.1.4.1.6302.2.1.2.2 | ScalarsystemVoltage | read-only | current | System voltage, stored as mV, including positive or negative sign. The integer 2147483647 represents invalid value. |
| 1.3.6.1.4.1.6302.2.1.2.3 | ScalarsystemCurrent | read-only | current | System current, stored as mA, including positive or negative sign. The integer 2147483647 represents invalid value. |
| 1.3.6.1.4.1.6302.2.1.2.4 | ScalarsystemUsedCapacity | read-only | current | Used capacity, stored as % of the total capacity. The integer 2147483647 represents invalid value. |
| 1.3.6.1.4.1.6302.2.1.2.5 | NodepsBattery | |||
| 1.3.6.1.4.1.6302.2.1.2.5.1 | ScalarpsBatteryVoltage | read-only | current | Battery voltage, stored as mV, including positive or negative sign. The integer 2147483647 represents invalid value. |
| 1.3.6.1.4.1.6302.2.1.2.5.2 | ScalarpsTotalBatteryCurrent | read-only | current | Battery current, stored as mA, including positive or negative sign. The integer 2147483647 represents invalid value. |
| 1.3.6.1.4.1.6302.2.1.2.5.3 | ScalarpsLowestBatteryCapacity | read-only | current | Calculated capacity, stored as % of the total capacity. The integer 2147483647 represents invalid value. |
| 1.3.6.1.4.1.6302.2.1.2.5.4 | ScalarpsBatteryNominalCapacity | read-only | current | nominal installed capacity, stored as mAh. The integer 2147483647 represents invalid value. |
| 1.3.6.1.4.1.6302.2.1.2.5.5 | TablepsBatteryTable | not-accessible | current | Battery Table. |
| 1.3.6.1.4.1.6302.2.1.2.5.5.1 | RowpsBatteryEntry | not-accessible | current | Battery Measurement Table Entry. |
| 1.3.6.1.4.1.6302.2.1.2.5.5.1.1 | ColumnpsBatteryIndex | read-only | current | Automatically generated index object. |
| 1.3.6.1.4.1.6302.2.1.2.5.5.1.2 | ColumnpsBatteryCurrent | read-only | current | Battery current in mA. |
| 1.3.6.1.4.1.6302.2.1.2.5.5.1.3 | ColumnpsBatteryName | read-only | current | Battery shunt name. |
| 1.3.6.1.4.1.6302.2.1.2.5.5.1.4 | ColumnpsBatteryRatedCapacity | read-write | current | Battery reted capacity. |
| 1.3.6.1.4.1.6302.2.1.2.5.5.1.5 | ColumnpsBatteryCapacity | read-only | current | Battery capacity in Ah. |
| 1.3.6.1.4.1.6302.2.1.2.5.5.1.6 | ColumnpsBatteryCapacityPercent | read-only | current | Battery capacity in percent. |
| 1.3.6.1.4.1.6302.2.1.2.5.6 | ScalarnumberOfBatteryStrings | read-only | current | Number of battery strings, including SMDUBat and MainboardBat. The integer 2147483647 represents invalid value. |
| 1.3.6.1.4.1.6302.2.1.2.5.7 | ScalartemperatureOfBattery | read-only | current | Temperature of battery. The integer 2147483647 represents invalid value. |
| 1.3.6.1.4.1.6302.2.1.2.5.8 | ScalarmaxCurrentOfCharging | read-write | current | Maximun battery charging current. The integer 2147483647 represents invalid value. |
| 1.3.6.1.4.1.6302.2.1.2.5.9 | NodechargingVoltage | |||
| 1.3.6.1.4.1.6302.2.1.2.5.9.1 | ScalarfloatVoltage | read-write | current | Float charging voltage. The integer 2147483647 represents invalid value. |
| 1.3.6.1.4.1.6302.2.1.2.5.9.2 | ScalarboostVoltage | read-write | current | Boost charging voltage. The integer 2147483647 represents invalid value. |
| 1.3.6.1.4.1.6302.2.1.2.5.10 | NodehighBatteryTemperature | |||
| 1.3.6.1.4.1.6302.2.1.2.5.10.1 | ScalarpsHighBatteryTemperature | read-write | current | High battery temperature. The integer 2147483647 represents invalid value. |
| 1.3.6.1.4.1.6302.2.1.2.5.10.2 | ScalarpsVeryHighBatteryTemperature | read-write | current | Very high battery temperature. The integer 2147483647 represents invalid value. |
| 1.3.6.1.4.1.6302.2.1.2.5.11 | ScalartemperatureCompensationCoefficient | read-write | current | Temperature compensation coefficient. The integer 2147483647 represents invalid value. |
| 1.3.6.1.4.1.6302.2.1.2.5.12 | ScalartemperatureCompensation | read-only | current | Temperature compensation . The integer 2147483647 represents invalid value. |
| 1.3.6.1.4.1.6302.2.1.2.5.13 | Scalarbatt1RemainingCapacity | read-only | current | Remain capacity of battery, stored as % of the total capacity. The integer 2147483647 represents invalid value. |
| 1.3.6.1.4.1.6302.2.1.2.5.14 | Scalarbatt1ShuntFullScaleCurrent | read-write | current | Battery 1 Shunt Full Scale Current in mA. The integer 2147483647 represents invalid value. |
| 1.3.6.1.4.1.6302.2.1.2.5.15 | Scalarbatt1ShuntFullScaleVoltage | read-write | current | Battery 1 Shunt Full Scale Voltage in thousandths of mV. The integer 2147483647 represents invalid value. |
| 1.3.6.1.4.1.6302.2.1.2.5.16 | ScalarpsBatteryCurrentLimit | read-write | current | Battery charge current limit stored as thousandths of C10 |
| 1.3.6.1.4.1.6302.2.1.2.5.17 | ScalarpsBatteryType | read-write | current | Battery Type number |
| 1.3.6.1.4.1.6302.2.1.2.5.18 | ScalarpsResetBatteryCapacity | read-write | current | Reset Battery Capacity, Yes(1) |
| 1.3.6.1.4.1.6302.2.1.2.5.19 | ScalarpsBatteryOverCurrentLimit | read-write | current | Battery over current limit stored as thousandths of C10 |
| 1.3.6.1.4.1.6302.2.1.2.5.20 | ScalarpsBatteryAccumDischargeNarada | read-only | current | Narada Battery's Cumulated Discharge. |
| 1.3.6.1.4.1.6302.2.1.2.5.21 | ScalarpsBatterySOHNarada | read-only | current | Narada Battery's SOH. |
| 1.3.6.1.4.1.6302.2.1.2.5.22 | ScalarpsBatterySOHIncell | read-only | current | Incell Battery's SOH. |
| 1.3.6.1.4.1.6302.2.1.2.5.23 | ScalarpsBatterySOHVision | read-only | current | Vision Battery's SOH. |
| 1.3.6.1.4.1.6302.2.1.2.5.24 | ScalarpsBatterySOHNokia | read-only | current | Nokia Battery's SOH. |
| 1.3.6.1.4.1.6302.2.1.2.6 | NodepsInput | |||
| 1.3.6.1.4.1.6302.2.1.2.6.1 | ScalarpsInputLineAVoltage | read-only | current | The AC line A voltage, stored as mV. The integer 2147483647 represents invalid value. |
| 1.3.6.1.4.1.6302.2.1.2.6.2 | ScalarpsInputLineBVoltage | read-only | current | The AC line B voltage, stored as mV. The integer 2147483647 represents invalid value. |
| 1.3.6.1.4.1.6302.2.1.2.6.3 | ScalarpsInputLineCVoltage | read-only | current | The AC line C voltage, stored as mV. The integer 2147483647 represents invalid value. |
| 1.3.6.1.4.1.6302.2.1.2.6.4 | ScalarpsInputPhaseACurrent | read-only | current | The AC Phase A current, stored as mA. The integer 2147483647 represents invalid value. |
| 1.3.6.1.4.1.6302.2.1.2.6.5 | ScalarpsInputPhaseBCurrent | read-only | current | The AC Phase B current, stored as mA. The integer 2147483647 represents invalid value. |
| 1.3.6.1.4.1.6302.2.1.2.6.6 | ScalarpsInputPhaseCCurrent | read-only | current | The AC Phase C current, stored as mA. The integer 2147483647 represents invalid value. |
| 1.3.6.1.4.1.6302.2.1.2.6.7 | ScalarpsInputPowerCP | read-only | current | Rectifier Total Input Power(CP) in thousandths of watts. |
| 1.3.6.1.4.1.6302.2.1.2.6.8 | ScalarpsInputPowerDG | read-only | current | Rectifier Total Input Power(DG) in thousandths of watts. |
| 1.3.6.1.4.1.6302.2.1.2.7 | NodepsTemperature | |||
| 1.3.6.1.4.1.6302.2.1.2.7.1 | ScalarpsTemperature1 | read-only | current | The first route temperature, stored as 0.001 Celsius degree. The integer 2147483647 represents invalid value. |
| 1.3.6.1.4.1.6302.2.1.2.7.2 | ScalarpsTemperature2 | read-only | current | The second route temperature, stored as 0.001 Celsius degree. The integer 2147483647 represents invalid value.. |
| 1.3.6.1.4.1.6302.2.1.2.7.3 | TablepsTemperatureTable | not-accessible | current | Temperature Measurement Table. |
| 1.3.6.1.4.1.6302.2.1.2.7.3.1 | RowpsTemperatureEntry | not-accessible | current | Temperature Measurement Table Entry. |
| 1.3.6.1.4.1.6302.2.1.2.7.3.1.1 | ColumnpsTemperatureIndex | read-only | current | Temperature Probe Number |
| 1.3.6.1.4.1.6302.2.1.2.7.3.1.2 | ColumnpsTemperatureMeasurement | read-only | current | Temperature Value In 0.001 Celsius Degree. |
| 1.3.6.1.4.1.6302.2.1.2.7.3.1.3 | ColumnpsTemperatureName | read-only | current | Configured Temperature Probe Name. |
| 1.3.6.1.4.1.6302.2.1.2.7.3.1.4 | ColumnpsTemperatureType | read-only | current | Temperature Probe Type |
| 1.3.6.1.4.1.6302.2.1.2.7.3.1.5 | ColumnpsTemperatureAlarmStatus | read-only | current | Temperature Probe Alarm Status |
| 1.3.6.1.4.1.6302.2.1.2.8 | ScalarpsStatusCommunication | read-only | current | The status of communication with the Power System. interrupt(3) indicates some errors occurred between Power System and agent. |
| 1.3.6.1.4.1.6302.2.1.2.9 | ScalarpsStatusBatteryMode | read-only | current | The status of battery modes, FloatCharging(2), ShortTest(3), BoostChargingForTest(4), ManualTesting(5), PlanTesting(6), ACFailTesting(7), ACFail(8), ManualBoos… |
| 1.3.6.1.4.1.6302.2.1.2.10 | NodepsSMNumber | |||
| 1.3.6.1.4.1.6302.2.1.2.10.1 | ScalarpsSMACNumber | read-only | current | The number of SM AC module. |
| 1.3.6.1.4.1.6302.2.1.2.10.2 | ScalarpsSMBATNumber | read-only | current | The number of SM BAT module. |
| 1.3.6.1.4.1.6302.2.1.2.10.3 | ScalarpsSMIONumber | read-only | current | The number of SM IO module. |
| 1.3.6.1.4.1.6302.2.1.2.11 | NodepsRectifier | |||
| 1.3.6.1.4.1.6302.2.1.2.11.1 | ScalarnumberOfInstalledRectifiers | read-only | current | number of rectifiers, stored as integer. The integer 2147483647 represents invalid value. |
| 1.3.6.1.4.1.6302.2.1.2.11.2 | ScalarnumberOfRectifiersCommunicating | read-only | current | number of rectifiers communicating, stored as integer. The integer 2147483647 represents invalid value. |
| 1.3.6.1.4.1.6302.2.1.2.11.3 | ScalarrectifiersUsedCapacity | read-only | current | Used capacity, stored as % of the total capacity. The integer 2147483647 represents invalid value. |
| 1.3.6.1.4.1.6302.2.1.2.11.4 | TablepsRectifierTable | not-accessible | current | Table holding information about indivual rectifiers. |
| 1.3.6.1.4.1.6302.2.1.2.11.4.1 | RowpsRectifierEntry | not-accessible | current | An entry (conceptual row) in the rectifierInfoTable. |
| 1.3.6.1.4.1.6302.2.1.2.11.4.1.1 | ColumnpsRectifierIndex | read-only | current | Automatically generated index object. |
| 1.3.6.1.4.1.6302.2.1.2.11.4.1.2 | ColumnpsRectifierProductNumber | read-only | current | Rectifier Product Number. |
| 1.3.6.1.4.1.6302.2.1.2.11.4.1.3 | ColumnpsRectifierHWVersion | read-only | current | Rectifier Hardware Revision. |
| 1.3.6.1.4.1.6302.2.1.2.11.4.1.4 | ColumnpsRectifierSWVersion | read-only | current | Rectifier Software Revision. |
| 1.3.6.1.4.1.6302.2.1.2.11.4.1.5 | ColumnpsRectifierSerialNumber | read-only | current | Rectifier Serial Number. |
| 1.3.6.1.4.1.6302.2.1.2.11.4.1.6 | ColumnpsRectifierCurrent | read-only | current | Rectifier Current. |
| 1.3.6.1.4.1.6302.2.1.2.11.4.1.7 | ColumnpsRectifierIdent | read-only | current | Rectifier physical location identifier. |
| 1.3.6.1.4.1.6302.2.1.2.11.4.1.8 | ColumnpsRectifierFail | read-only | current | The type of alarm change. One of (1) activated (2) deactivated |
| 1.3.6.1.4.1.6302.2.1.2.11.4.1.9 | ColumnpsRectifierTemperature | read-only | current | Rectifier Temperature. |
| 1.3.6.1.4.1.6302.2.1.2.11.5 | ScalarpsPowerOfRectifiers | read-only | current | Total power of rectifiers. The integer 2147483647 represents invalid value. |
| 1.3.6.1.4.1.6302.2.1.2.11.7 | ScalarpsOverOutputVoltage | read-only | current | Rectifier output over voltage protection point. The integer 2147483647 represents invalid value. |
| 1.3.6.1.4.1.6302.2.1.2.11.8 | ScalarpsVeryOverOutputVoltage | read-only | current | Rectifier output very over voltage protection point. The integer 2147483647 represents invalid value. |
| 1.3.6.1.4.1.6302.2.1.2.11.9 | ScalarpsSoftStartStatus | read-write | current | Soft-start functuin status. The integer 2147483647 represents invalid value. |
| 1.3.6.1.4.1.6302.2.1.2.11.10 | ScalarpsSoftStartTime | read-write | current | SoftStart Time, stored as Sec. Value range: 8~128. |
| 1.3.6.1.4.1.6302.2.1.2.11.11 | ScalarpsACEnergyOfRectifiers | read-only | current | Total AC energy of rectifiers. The integer 2147483647 represents invalid value. |
| 1.3.6.1.4.1.6302.2.1.2.11.12 | ScalarpsDCEnergyOfRectifiers | read-only | current | Total DC energy of rectifiers. The integer 2147483647 represents invalid value. |
| 1.3.6.1.4.1.6302.2.1.2.11.13 | ScalarpsRectifierAllONOFF | read-write | current | ON OFF of all rectifiers. The integer 2147483647 represents invalid value. |
| 1.3.6.1.4.1.6302.2.1.2.12 | NodepsDistribution | |||
| 1.3.6.1.4.1.6302.2.1.2.12.1 | ScalarpsTotalLoadCurrent | read-only | current | Total Load current, stored as mA. The integer 2147483647 represents invalid value. |
| 1.3.6.1.4.1.6302.2.1.2.12.2 | TablepsDistributionLoadTable | not-accessible | current | Distribution Table. |
| 1.3.6.1.4.1.6302.2.1.2.12.2.1 | RowpsDistributionLoadEntry | not-accessible | current | Distribution Measurement Table Entry. |
| 1.3.6.1.4.1.6302.2.1.2.12.2.1.1 | ColumnpsDistributionLoadIndex | not-accessible | current | Automatically generated index object. |
| 1.3.6.1.4.1.6302.2.1.2.12.2.1.2 | ColumnpsDistributionLoadCurrent | read-only | current | Distribution current in mA. |
| 1.3.6.1.4.1.6302.2.1.2.12.2.1.3 | ColumnpsDistributionLoadName | read-only | current | Distribution name. |
| 1.3.6.1.4.1.6302.2.1.2.12.3 | TablepsDistributionGeneralTable | not-accessible | current | Distribution Table. |
| 1.3.6.1.4.1.6302.2.1.2.12.3.1 | RowpsDistributionGeneralEntry | not-accessible | current | Distribution Measurement Table Entry. |
| 1.3.6.1.4.1.6302.2.1.2.12.3.1.1 | ColumnpsDistributionGeneralIndex | not-accessible | current | Automatically generated index object. |
| 1.3.6.1.4.1.6302.2.1.2.12.3.1.2 | ColumnpsDistributionGeneralCurrent | read-only | current | Distribution current in mA. |
| 1.3.6.1.4.1.6302.2.1.2.12.3.1.3 | ColumnpsDistributionGeneralName | read-only | current | Distribution name. |
| 1.3.6.1.4.1.6302.2.1.2.13 | NodepsConverter | |||
| 1.3.6.1.4.1.6302.2.1.2.13.1 | ScalarnumberOfInstalledConverters | read-only | current | number of converters, stored as integer. The integer 2147483647 represents invalid value. |
| 1.3.6.1.4.1.6302.2.1.2.13.2 | ScalarnumberOfConvertersCommunicating | read-only | current | number of converters communicating, stored as integer. The integer 2147483647 represents invalid value. |
| 1.3.6.1.4.1.6302.2.1.2.13.3 | ScalarconvertersUsedCapacity | read-only | current | Used capacity, stored as % of the total capacity. The integer 2147483647 represents invalid value. |
| 1.3.6.1.4.1.6302.2.1.2.13.4 | ScalarpsConverterVoltage | read-only | current | Converter voltage in mV. The integer 2147483647 represents invalid value. |
| 1.3.6.1.4.1.6302.2.1.2.13.5 | ScalarpsTotalConverterCurrent | read-only | current | Total Converter current in mA. The integer 2147483647 represents invalid value. |
| 1.3.6.1.4.1.6302.2.1.2.13.6 | TablepsConverterTable | not-accessible | current | Table holding information about indivual converters. |
| 1.3.6.1.4.1.6302.2.1.2.13.6.1 | RowpsConverterEntry | not-accessible | current | An entry (conceptual row) in the ConverterInfoTable. |
| 1.3.6.1.4.1.6302.2.1.2.13.6.1.1 | ColumnpsConverterIndex | read-only | current | Automatically generated index object. |
| 1.3.6.1.4.1.6302.2.1.2.13.6.1.2 | ColumnpsConverterProductNumber | read-only | current | Converter Product Number. |
| 1.3.6.1.4.1.6302.2.1.2.13.6.1.3 | ColumnpsConverterHWVersion | read-only | current | Converter Hardware Revision. |
| 1.3.6.1.4.1.6302.2.1.2.13.6.1.4 | ColumnpsConverterSWVersion | read-only | current | Converter Software Revision. |
| 1.3.6.1.4.1.6302.2.1.2.13.6.1.5 | ColumnpsConverterSerialNumber | read-only | current | Converter Serial Number. |
| 1.3.6.1.4.1.6302.2.1.2.13.6.1.6 | ColumnpsConverterCurrent | read-only | current | Converter Current. |
| 1.3.6.1.4.1.6302.2.1.2.13.6.1.7 | ColumnpsConverterIdent | read-only | current | Converter physical location identifier. |
| 1.3.6.1.4.1.6302.2.1.2.13.6.1.8 | ColumnpsConverterFail | read-only | current | The type of alarm change. One of (1) activated (2) deactivated |
| 1.3.6.1.4.1.6302.2.1.2.14 | NodepsControl | |||
| 1.3.6.1.4.1.6302.2.1.2.14.1 | ScalarcontrolBatteryTest | read-write | current | Control battery test, start(1), stop(0). |
| 1.3.6.1.4.1.6302.2.1.2.14.2 | ScalarcontrolRelay8 | read-write | current | Control relay8, close(1), open(0). |
| 1.3.6.1.4.1.6302.2.1.2.14.3 | ScalarcontrolRelay7 | read-write | current | Control relay7, close(1), open(0). |
| 1.3.6.1.4.1.6302.2.1.2.14.4 | ScalarcontrolRelay6 | read-write | current | Control relay6, close(1), open(0). |
| 1.3.6.1.4.1.6302.2.1.2.14.5 | ScalarcontrolRelayTest | read-write | current | Control Relay test, auto(2), manual(1), disabled(0). |
| 1.3.6.1.4.1.6302.2.1.2.15 | TablepsEquipmentSignalTable | not-accessible | current | Table of indexed equipment signal values. |
| 1.3.6.1.4.1.6302.2.1.2.15.1 | RowequipmentSignalTableEntry | not-accessible | current | An entry (conceptual row) in the psEquipment Signal Table. |
| 1.3.6.1.4.1.6302.2.1.2.15.1.1 | ColumnpsEquipmentSignalTableEntryIndex | read-only | current | The unique sequence number of this equipment signal. |
| 1.3.6.1.4.1.6302.2.1.2.15.1.2 | ColumnpsEquipmentSignalValue | read-only | current | Indexed equipment signal value. |
| 1.3.6.1.4.1.6302.2.1.2.16 | ScalarambientTemperature | read-only | current | AmbientTemperature. The integer 2147483647 represents invalid value. |
| 1.3.6.1.4.1.6302.2.1.2.17 | ScalarautoManualMode | read-write | current | Auto/Manual Mode of system. The integer 2147483647 represents invalid value. |
| 1.3.6.1.4.1.6302.2.1.2.18 | NodepsLVDVoltage | |||
| 1.3.6.1.4.1.6302.2.1.2.18.1 | ScalarpsLVD1DisconnectVoltage | read-write | current | LVD1 Disconnect voltage, stored as mV. The integer 2147483647 represents invalid value. |
| 1.3.6.1.4.1.6302.2.1.2.18.2 | ScalarpsLVD2DisconnectVoltage | read-write | current | LVD2 Disconnect voltage, stored as mV. The integer 2147483647 represents invalid value. |
| 1.3.6.1.4.1.6302.2.1.2.18.3 | ScalarpsLVD1ReconnectVoltage | read-write | current | LVD1 Reconnect voltage, stored as mV. The integer 2147483647 represents invalid value. |
| 1.3.6.1.4.1.6302.2.1.2.18.4 | ScalarpsLVD2ReconnectVoltage | read-write | current | LVD2 Reconnect voltage, stored as mV. The integer 2147483647 represents invalid value. |
| 1.3.6.1.4.1.6302.2.1.2.18.5 | Scalarsmdu1LVD1DisconnectVoltage | read-write | current | SMDU1 LVD1 Disconnect voltage, stored as mV. The integer 2147483647 represents invalid value. |
| 1.3.6.1.4.1.6302.2.1.2.18.6 | Scalarsmdu1LVD2DisconnectVoltage | read-write | current | SMDU1 LVD2 Disconnect voltage, stored as mV. The integer 2147483647 represents invalid value. |
| 1.3.6.1.4.1.6302.2.1.2.18.7 | Scalarsmdu1LVD1ReconnectVoltage | read-write | current | SMDU1 LVD1 Reconnect voltage, stored as mV. The integer 2147483647 represents invalid value. |
| 1.3.6.1.4.1.6302.2.1.2.18.8 | Scalarsmdu1LVD2ReconnectVoltage | read-write | current | SMDU1 LVD2 Reconnect voltage, stored as mV. The integer 2147483647 represents invalid value. |
| 1.3.6.1.4.1.6302.2.1.2.19 | NodepsDCLowVoltage | |||
| 1.3.6.1.4.1.6302.2.1.2.19.1 | ScalarpsDCLowAlarmVoltage | read-write | current | DC low voltage, stored as mV. The integer 2147483647 represents invalid value. |
| 1.3.6.1.4.1.6302.2.1.2.19.2 | ScalarpsDCVeryLowAlarmVoltage | read-write | current | DC very low voltage, stored as mV. The integer 2147483647 represents invalid value. |
| 1.3.6.1.4.1.6302.2.1.2.20 | NodeacLowVoltage | |||
| 1.3.6.1.4.1.6302.2.1.2.20.1 | ScalarpsACLowAlarmVoltage | read-write | current | AC low voltage, stored as V. The integer 2147483647 represents invalid value. |
| 1.3.6.1.4.1.6302.2.1.2.20.2 | ScalarpsACVeryLowAlarmVoltage | read-write | current | AC very low voltage, stored as V. The integer 2147483647 represents invalid value. |
| 1.3.6.1.4.1.6302.2.1.2.21 | NodepsSMDUHCurrent | |||
| 1.3.6.1.4.1.6302.2.1.2.21.1 | ScalarnumberOfInstalledSMDUH | read-only | current | number of SMDHU units, stored as integer. The integer 2147483647 represents invalid value. |
| 1.3.6.1.4.1.6302.2.1.2.21.2 | ScalarpsSMDUH1Voltage | read-only | current | SMDUH1 Voltage in mV. |
| 1.3.6.1.4.1.6302.2.1.2.21.3 | ScalarpsSMDUH2Voltage | read-only | current | SMDUH2 Voltage in mV. |
| 1.3.6.1.4.1.6302.2.1.2.21.4 | ScalarpsSMDUH3Voltage | read-only | current | SMDUH3 Voltage in mV. |
| 1.3.6.1.4.1.6302.2.1.2.21.5 | ScalarpsSMDUH4Voltage | read-only | current | SMDUH4 Voltage in mV. |
| 1.3.6.1.4.1.6302.2.1.2.21.6 | ScalarpsSMDUH5Voltage | read-only | current | SMDUH5 Voltage in mV. |
| 1.3.6.1.4.1.6302.2.1.2.21.7 | ScalarpsSMDUH6Voltage | read-only | current | SMDUH6 Voltage in mV. |
| 1.3.6.1.4.1.6302.2.1.2.21.8 | ScalarpsSMDUH7Voltage | read-only | current | SMDUH7 Voltage in mV. |
| 1.3.6.1.4.1.6302.2.1.2.21.9 | ScalarpsSMDUH8Voltage | read-only | current | SMDUH8 Voltage in mV. |
| 1.3.6.1.4.1.6302.2.1.2.21.10 | TablepsSMDUHCurrentTable | not-accessible | current | Table holding information about SMDUH currents. |
| 1.3.6.1.4.1.6302.2.1.2.21.10.1 | RowpsSMDUHCurrentEntry | not-accessible | current | An entry (conceptual row) in the SMDUHTable. |
| 1.3.6.1.4.1.6302.2.1.2.21.10.1.1 | ColumnpsSMDUHCurrentIndex | read-only | current | Automatically generated index object. |
| 1.3.6.1.4.1.6302.2.1.2.21.10.1.2 | ColumnpsSMDUHCurrent1 | read-only | current | SMDUH Current 1 in mA. |
| 1.3.6.1.4.1.6302.2.1.2.21.10.1.3 | ColumnpsSMDUHCurrent2 | read-only | current | SMDUH Current 2 in mA. |
| 1.3.6.1.4.1.6302.2.1.2.21.10.1.4 | ColumnpsSMDUHCurrent3 | read-only | current | SMDUH Current 3 in mA. |
| 1.3.6.1.4.1.6302.2.1.2.21.10.1.5 | ColumnpsSMDUHCurrent4 | read-only | current | SMDUH Current 4 in mA. |
| 1.3.6.1.4.1.6302.2.1.2.21.10.1.6 | ColumnpsSMDUHCurrent5 | read-only | current | SMDUH Current 5 in mA. |
| 1.3.6.1.4.1.6302.2.1.2.21.10.1.7 | ColumnpsSMDUHCurrent6 | read-only | current | SMDUH Current 6 in mA. |
| 1.3.6.1.4.1.6302.2.1.2.21.10.1.8 | ColumnpsSMDUHCurrent7 | read-only | current | SMDUH Current 7 in mA. |
| 1.3.6.1.4.1.6302.2.1.2.21.10.1.9 | ColumnpsSMDUHCurrent8 | read-only | current | SMDUH Current 8 in mA. |
| 1.3.6.1.4.1.6302.2.1.2.21.10.1.10 | ColumnpsSMDUHCurrent9 | read-only | current | SMDUH Current 9 in mA. |
| 1.3.6.1.4.1.6302.2.1.2.21.10.1.11 | ColumnpsSMDUHCurrent10 | read-only | current | SMDUH Current 10 in mA. |
| 1.3.6.1.4.1.6302.2.1.2.21.10.1.12 | ColumnpsSMDUHCurrent11 | read-only | current | SMDUH Current 11 in mA. |
| 1.3.6.1.4.1.6302.2.1.2.21.10.1.13 | ColumnpsSMDUHCurrent12 | read-only | current | SMDUH Current 12 in mA. |
| 1.3.6.1.4.1.6302.2.1.2.21.10.1.14 | ColumnpsSMDUHCurrent13 | read-only | current | SMDUH Current 13 in mA. |
| 1.3.6.1.4.1.6302.2.1.2.21.10.1.15 | ColumnpsSMDUHCurrent14 | read-only | current | SMDUH Current 14 in mA. |
| 1.3.6.1.4.1.6302.2.1.2.21.10.1.16 | ColumnpsSMDUHCurrent15 | read-only | current | SMDUH Current 15 in mA. |
| 1.3.6.1.4.1.6302.2.1.2.21.10.1.17 | ColumnpsSMDUHCurrent16 | read-only | current | SMDUH Current 16 in mA. |
| 1.3.6.1.4.1.6302.2.1.2.21.10.1.18 | ColumnpsSMDUHCurrent17 | read-only | current | SMDUH Current 17 in mA. |
| 1.3.6.1.4.1.6302.2.1.2.21.10.1.19 | ColumnpsSMDUHCurrent18 | read-only | current | SMDUH Current 18 in mA. |
| 1.3.6.1.4.1.6302.2.1.2.21.10.1.20 | ColumnpsSMDUHCurrent19 | read-only | current | SMDUH Current 19 in mA. |
| 1.3.6.1.4.1.6302.2.1.2.21.10.1.21 | ColumnpsSMDUHCurrent20 | read-only | current | SMDUH Current 20 in mA. |
| 1.3.6.1.4.1.6302.2.1.2.22 | NodepsSMDUHPower | |||
| 1.3.6.1.4.1.6302.2.1.2.22.1 | TablepsSMDUHPowerTable | not-accessible | current | Table holding information about SMDUH power. |
| 1.3.6.1.4.1.6302.2.1.2.22.1.1 | RowpsSMDUHPowerEntry | not-accessible | current | An entry (conceptual row) in the SMDUHPowerTable. |
| 1.3.6.1.4.1.6302.2.1.2.22.1.1.1 | ColumnpsSMDUHPowerIndex | read-only | current | Automatically generated index object. |
| 1.3.6.1.4.1.6302.2.1.2.22.1.1.2 | ColumnpsSMDUHPower1 | read-only | current | SMDUH Power 1 in thousandths of kW. |
| 1.3.6.1.4.1.6302.2.1.2.22.1.1.3 | ColumnpsSMDUHPower2 | read-only | current | SMDUH Power 2. |
| 1.3.6.1.4.1.6302.2.1.2.22.1.1.4 | ColumnpsSMDUHPower3 | read-only | current | SMDUH Power 3. |
| 1.3.6.1.4.1.6302.2.1.2.22.1.1.5 | ColumnpsSMDUHPower4 | read-only | current | SMDUH Power 4. |
| 1.3.6.1.4.1.6302.2.1.2.22.1.1.6 | ColumnpsSMDUHPower5 | read-only | current | SMDUH Power 5. |
| 1.3.6.1.4.1.6302.2.1.2.22.1.1.7 | ColumnpsSMDUHPower6 | read-only | current | SMDUH Power 6. |
| 1.3.6.1.4.1.6302.2.1.2.22.1.1.8 | ColumnpsSMDUHPower7 | read-only | current | SMDUH Power 7. |
| 1.3.6.1.4.1.6302.2.1.2.22.1.1.9 | ColumnpsSMDUHPower8 | read-only | current | SMDUH Power 8. |
| 1.3.6.1.4.1.6302.2.1.2.22.1.1.10 | ColumnpsSMDUHPower9 | read-only | current | SMDUH Power 9. |
| 1.3.6.1.4.1.6302.2.1.2.22.1.1.11 | ColumnpsSMDUHPower10 | read-only | current | SMDUH Power 10. |
| 1.3.6.1.4.1.6302.2.1.2.22.1.1.12 | ColumnpsSMDUHPower11 | read-only | current | SMDUH Power 11. |
| 1.3.6.1.4.1.6302.2.1.2.22.1.1.13 | ColumnpsSMDUHPower12 | read-only | current | SMDUH Power 12. |
| 1.3.6.1.4.1.6302.2.1.2.22.1.1.14 | ColumnpsSMDUHPower13 | read-only | current | SMDUH Power 13. |
| 1.3.6.1.4.1.6302.2.1.2.22.1.1.15 | ColumnpsSMDUHPower14 | read-only | current | SMDUH Power 14. |
| 1.3.6.1.4.1.6302.2.1.2.22.1.1.16 | ColumnpsSMDUHPower15 | read-only | current | SMDUH Power 15. |
| 1.3.6.1.4.1.6302.2.1.2.22.1.1.17 | ColumnpsSMDUHPower16 | read-only | current | SMDUH Power 16. |
| 1.3.6.1.4.1.6302.2.1.2.22.1.1.18 | ColumnpsSMDUHPower17 | read-only | current | SMDUH Power 17. |
| 1.3.6.1.4.1.6302.2.1.2.22.1.1.19 | ColumnpsSMDUHPower18 | read-only | current | SMDUH Power 18. |
| 1.3.6.1.4.1.6302.2.1.2.22.1.1.20 | ColumnpsSMDUHPower19 | read-only | current | SMDUH Power 19. |
| 1.3.6.1.4.1.6302.2.1.2.22.1.1.21 | ColumnpsSMDUHPower20 | read-only | current | SMDUH Power 20. |
| 1.3.6.1.4.1.6302.2.1.2.23 | NodepsSMDUHEnergy | |||
| 1.3.6.1.4.1.6302.2.1.2.23.1 | TablepsSMDUHEnergyTable | not-accessible | current | Table holding information about SMDUH energy counters. |
| 1.3.6.1.4.1.6302.2.1.2.23.1.1 | RowpsSMDUHEnergyEntry | not-accessible | current | An entry (conceptual row) in the SMDUHEnergyTable. |
| 1.3.6.1.4.1.6302.2.1.2.23.1.1.1 | ColumnpsSMDUHEnergyIndex | read-only | current | Automatically generated index object. |
| 1.3.6.1.4.1.6302.2.1.2.23.1.1.2 | ColumnpsSMDUHTotalEnergy1 | read-only | current | SMDUH Total Energy 1. |
| 1.3.6.1.4.1.6302.2.1.2.23.1.1.3 | ColumnpsSMDUHTotalEnergy2 | read-only | current | SMDUH Total Energy 2. |
| 1.3.6.1.4.1.6302.2.1.2.23.1.1.4 | ColumnpsSMDUHTotalEnergy3 | read-only | current | SMDUH Total Energy 3. |
| 1.3.6.1.4.1.6302.2.1.2.23.1.1.5 | ColumnpsSMDUHTotalEnergy4 | read-only | current | SMDUH Total Energy 4. |
| 1.3.6.1.4.1.6302.2.1.2.23.1.1.6 | ColumnpsSMDUHTotalEnergy5 | read-only | current | SMDUH Total Energy 5. |
| 1.3.6.1.4.1.6302.2.1.2.23.1.1.7 | ColumnpsSMDUHTotalEnergy6 | read-only | current | SMDUH Total Energy 6. |
| 1.3.6.1.4.1.6302.2.1.2.23.1.1.8 | ColumnpsSMDUHTotalEnergy7 | read-only | current | SMDUH Total Energy 7. |
| 1.3.6.1.4.1.6302.2.1.2.23.1.1.9 | ColumnpsSMDUHTotalEnergy8 | read-only | current | SMDUH Total Energy 8. |
| 1.3.6.1.4.1.6302.2.1.2.23.1.1.10 | ColumnpsSMDUHTotalEnergy9 | read-only | current | SMDUH Total Energy 9. |
| 1.3.6.1.4.1.6302.2.1.2.23.1.1.11 | ColumnpsSMDUHTotalEnergy10 | read-only | current | SMDUH Total Energy 10. |
| 1.3.6.1.4.1.6302.2.1.2.23.1.1.12 | ColumnpsSMDUHTotalEnergy11 | read-only | current | SMDUH Total Energy 11. |
| 1.3.6.1.4.1.6302.2.1.2.23.1.1.13 | ColumnpsSMDUHTotalEnergy12 | read-only | current | SMDUH Total Energy 12. |
| 1.3.6.1.4.1.6302.2.1.2.23.1.1.14 | ColumnpsSMDUHTotalEnergy13 | read-only | current | SMDUH Total Energy 13. |
| 1.3.6.1.4.1.6302.2.1.2.23.1.1.15 | ColumnpsSMDUHTotalEnergy14 | read-only | current | SMDUH Total Energy 14. |
| 1.3.6.1.4.1.6302.2.1.2.23.1.1.16 | ColumnpsSMDUHTotalEnergy15 | read-only | current | SMDUH Total Energy 15. |
| 1.3.6.1.4.1.6302.2.1.2.23.1.1.17 | ColumnpsSMDUHTotalEnergy16 | read-only | current | SMDUH Total Energy 16. |
| 1.3.6.1.4.1.6302.2.1.2.23.1.1.18 | ColumnpsSMDUHTotalEnergy17 | read-only | current | SMDUH Total Energy 17. |
| 1.3.6.1.4.1.6302.2.1.2.23.1.1.19 | ColumnpsSMDUHTotalEnergy18 | read-only | current | SMDUH Total Energy 18. |
| 1.3.6.1.4.1.6302.2.1.2.23.1.1.20 | ColumnpsSMDUHTotalEnergy19 | read-only | current | SMDUH Total Energy 19. |
| 1.3.6.1.4.1.6302.2.1.2.23.1.1.21 | ColumnpsSMDUHTotalEnergy20 | read-only | current | SMDUH Total Energy 20. |
| 1.3.6.1.4.1.6302.2.1.2.24 | NodepsSMDU | |||
| 1.3.6.1.4.1.6302.2.1.2.24.1 | TablepsSMDUTable | not-accessible | current | Table holding information about SMDU. |
| 1.3.6.1.4.1.6302.2.1.2.24.1.1 | RowpsSMDUEntry | not-accessible | current | An entry (conceptual row) in the SMDU Table. |
| 1.3.6.1.4.1.6302.2.1.2.24.1.1.1 | ColumnpsSMDUIndex | read-only | current | Automatically generated index object. |
| 1.3.6.1.4.1.6302.2.1.2.24.1.1.2 | ColumnpsSMDULoad1Power | read-only | current | SMDU Load1 Power in thousandths of kW |
| 1.3.6.1.4.1.6302.2.1.2.24.1.1.3 | ColumnpsSMDULoad2Power | read-only | current | SMDU Load2 Power in thousandths of kW |
| 1.3.6.1.4.1.6302.2.1.2.24.1.1.4 | ColumnpsSMDULoad3Power | read-only | current | SMDU Load3 Power in thousandths of kW |
| 1.3.6.1.4.1.6302.2.1.2.24.1.1.5 | ColumnpsSMDULoad4Power | read-only | current | SMDU Load4 Power in thousandths of kW |
| 1.3.6.1.4.1.6302.2.1.2.24.1.1.6 | ColumnpsSMDULoad5Power | read-only | current | SMDU Load5 Power in thousandths of kW |
| 1.3.6.1.4.1.6302.2.1.2.24.1.1.7 | ColumnpsSMDUShunt1FullScaleCurrent | read-write | current | SMDU Shunt1 Full Scale Current in mA. |
| 1.3.6.1.4.1.6302.2.1.2.24.1.1.8 | ColumnpsSMDUShunt1FullScaleVoltage | read-write | current | SMDU Shunt1 Full Scale Voltage in thousandths of mV. |
| 1.3.6.1.4.1.6302.2.1.2.24.1.1.9 | ColumnpsSMDUShunt2FullScaleCurrent | read-write | current | SMDU Shunt2 Full Scale Current in mA. |
| 1.3.6.1.4.1.6302.2.1.2.24.1.1.10 | ColumnpsSMDUShunt2FullScaleVoltage | read-write | current | SMDU Shunt2 Full Scale Voltage in thousandths of mV. |
| 1.3.6.1.4.1.6302.2.1.2.24.1.1.11 | ColumnpsSMDUShunt3FullScaleCurrent | read-write | current | SMDU Shunt3 Full Scale Current in mA. |
| 1.3.6.1.4.1.6302.2.1.2.24.1.1.12 | ColumnpsSMDUShunt3FullScaleVoltage | read-write | current | SMDU Shunt3 Full Scale Voltage in thousandths of mV. |
| 1.3.6.1.4.1.6302.2.1.2.24.1.1.13 | ColumnpsSMDUShunt4FullScaleCurrent | read-write | current | SMDU Shunt4 Full Scale Current in mA. |
| 1.3.6.1.4.1.6302.2.1.2.24.1.1.14 | ColumnpsSMDUShunt4FullScaleVoltage | read-write | current | SMDU Shunt4 Full Scale Voltage in thousandths of mV. |
| 1.3.6.1.4.1.6302.2.1.2.24.1.1.15 | ColumnpsSMDUShunt5FullScaleCurrent | read-write | current | SMDU Shunt5 Full Scale Current in mA. |
| 1.3.6.1.4.1.6302.2.1.2.24.1.1.16 | ColumnpsSMDUShunt5FullScaleVoltage | read-write | current | SMDU Shunt5 Full Scale Voltage in thousandths of mV. |
| 1.3.6.1.4.1.6302.2.1.2.25 | NodepsSolar | |||
| 1.3.6.1.4.1.6302.2.1.2.25.1 | ScalarnumberOfInstalledSolar | read-only | current | number of Solar converters, stored as integer. The integer 2147483647 represents invalid value. |
| 1.3.6.1.4.1.6302.2.1.2.25.2 | ScalarnumberOfSolarCommunicating | read-only | current | number of Solar converters communicating, stored as integer. The integer 2147483647 represents invalid value. |
| 1.3.6.1.4.1.6302.2.1.2.25.3 | ScalarsolarsUsedCapacity | read-only | current | Used capacity, stored as % of the total capacity. The integer 2147483647 represents invalid value. |
| 1.3.6.1.4.1.6302.2.1.2.25.4 | ScalarpsSolarTotalCurrent | read-only | current | Solar Converter Total output current in mA. The integer 2147483647 represents invalid value. |
| 1.3.6.1.4.1.6302.2.1.2.25.5 | ScalarpsSolarTotalPower | read-only | current | Solar Converter Total Output Power in W * 1000. |
| 1.3.6.1.4.1.6302.2.1.2.25.6 | ScalarpsSolarTotalInputCurrent | read-only | current | Solar Converter Total input current in mA. The integer 2147483647 represents invalid value. |
| 1.3.6.1.4.1.6302.2.1.2.25.7 | ScalarpsSolarTotalInputPower | read-only | current | Solar Converter Total input Power in kW * 1000. |
| 1.3.6.1.4.1.6302.2.1.2.25.8 | ScalarpsSolarMode | read-write | current | Solar mode, Disabled(0), RECT-SOLAR(1), Solar(2) |
| 1.3.6.1.4.1.6302.2.1.2.25.9 | ScalarpsSolarRunningWay | read-write | current | Solar mode, Disabled(0), RECT-SOLAR(1), Solar(2) |
| 1.3.6.1.4.1.6302.2.1.2.26 | NodepsSetting | |||
| 1.3.6.1.4.1.6302.2.1.2.26.1 | ScalarsettingSolarFloatVoltage | read-write | current | Solar Float voltage stored as mV |
| 1.3.6.1.4.1.6302.2.1.2.26.2 | ScalarsettingSolarEQChargeVoltage | read-write | current | Solar Equalize voltage stored as mV |
| 1.3.6.1.4.1.6302.2.1.2.26.3 | ScalarsettingRectifierFloatVoltage | read-write | current | Rectifier Float voltage stored as mV |
| 1.3.6.1.4.1.6302.2.1.2.26.4 | ScalarsettingRectifierEQChargeVoltage | read-write | current | Rectifier Equalize voltage stored as mV |
| 1.3.6.1.4.1.6302.2.1.2.26.5 | ScalarsettingRectifierWalkInEnable | read-write | current | Rectifier walk-in Enable, Disabled(0), Active(1) |
| 1.3.6.1.4.1.6302.2.1.2.26.6 | ScalarsettingRectifierWalkInTime | read-write | current | Rectifier walk-in time in seconds. |
| 1.3.6.1.4.1.6302.2.1.2.26.7 | ScalarsettingRectifierCurrentLimitEnable | read-write | current | Rectifier Current Limit Enable, Disabled(0), Active(1) |
| 1.3.6.1.4.1.6302.2.1.2.26.8 | ScalarsettingRectifierCurrentLimit | read-write | current | Rectifier current limit stored as mA |
| 1.3.6.1.4.1.6302.2.1.2.26.9 | ScalarsettingRectifierInputCurrentLimit | read-write | current | Rectifier input current limit stored as mA |
| 1.3.6.1.4.1.6302.2.1.2.26.10 | ScalarsettingGeneratorPowerLimitEnable | read-write | current | Diesel Generator Power Limit Enable, Disabled(0), Active(1) |
| 1.3.6.1.4.1.6302.2.1.2.26.11 | ScalarsettingGeneratorPowerLimitPoint | read-write | current | Diesel Generator Power Limit point in percent * 1000. |
| 1.3.6.1.4.1.6302.2.1.2.26.12 | ScalarsettingGeneratorStartVoltage | read-write | current | Diesel Generator Start voltage stored as mV |
| 1.3.6.1.4.1.6302.2.1.2.26.13 | ScalarsettingGeneratorStopVoltage | read-write | current | Diesel Generator Stop voltage stored as mV |
| 1.3.6.1.4.1.6302.2.1.2.26.14 | ScalarsettingHybridMode | read-write | current | Solar mode, Disabled(0), RECT-SOLAR(1), Solar(2) |
| 1.3.6.1.4.1.6302.2.1.2.26.15 | ScalarsettingGeneratorRelay | read-write | current | Diesel Generator Relay, None(0), Relay Output 1(1), Relay Output 2(2), Relay Output 3(3), Relay Output 4(4), Relay Output 5(5), Relay Output 6(6), Relay Output… |
| 1.3.6.1.4.1.6302.2.1.2.27 | NodepsCabinet | |||
| 1.3.6.1.4.1.6302.2.1.2.27.1 | TablepsCabinetTable | not-accessible | current | Table holding information about Cabinet. |
| 1.3.6.1.4.1.6302.2.1.2.27.1.1 | RowpsCabinetEntry | not-accessible | current | An entry (conceptual row) in the Cabinet Table. |
| 1.3.6.1.4.1.6302.2.1.2.27.1.1.1 | ColumnpsCabinetIndex | read-only | current | Automatically generated index object. |
| 1.3.6.1.4.1.6302.2.1.2.27.1.1.2 | ColumnpsCabinetTotalCurrent | read-only | current | Cabinet Total Current in mA |
| 1.3.6.1.4.1.6302.2.1.2.27.1.1.3 | ColumnpsCabinetTotalPower | read-only | current | Cabinet Total Power in thousandths of W |
| 1.3.6.1.4.1.6302.2.1.2.27.1.1.4 | ColumnpsCabinetTotalEnergy | read-only | current | Cabinet Total Energy in thousandths of KWh |
| 1.3.6.1.4.1.6302.2.1.2.27.1.1.5 | ColumnpsCabinetAlarmStatus | read-only | current | Cabinet Alarm Status |
| 1.3.6.1.4.1.6302.2.1.3 | ScalaralarmLastTrapNo | read-only | current | The sequence number of last submitted alarm trap, also last row in alarmTrapTable. |
| 1.3.6.1.4.1.6302.2.1.4 | TablealarmActiveAlarmTable | not-accessible | current | Table holding information about the currently active alarms. |
| 1.3.6.1.4.1.6302.2.1.4.1 | RowactiveAlarmEntry | not-accessible | current | An entry (conceptual row) in the alarmTrapTable. |
| 1.3.6.1.4.1.6302.2.1.4.1.1 | ColumnalarmIndex | read-only | current | The unique sequence number of this alarm trap. |
| 1.3.6.1.4.1.6302.2.1.4.1.2 | ColumnalarmTime | read-only | current | Date and time when event occured (local time), including timezone if supported by controller. |
| 1.3.6.1.4.1.6302.2.1.4.1.3 | ColumnalarmStatusChange | read-only | current | The type of alarm change. One of (1) activated (2) deactivated |
| 1.3.6.1.4.1.6302.2.1.4.1.4 | ColumnalarmSeverity | read-only | current | The severity of the alarm. One of (3) warning - OA, lowest level of alarm severity (4) minor - A3 (5) major - MA (6) critical - CA, highest level of alarm seve… |
| 1.3.6.1.4.1.6302.2.1.4.1.5 | ColumnalarmDescription | read-only | current | Free-text description of alarm. |
| 1.3.6.1.4.1.6302.2.1.4.1.6 | ColumnalarmType | read-only | current | Alarm type, i.e. an integer specifying the type of alarm. |
| 1.3.6.1.4.1.6302.2.1.5 | NodepowerEvents | |||
| 1.3.6.1.4.1.6302.2.1.5.1 | NotificationalarmTrap | current | An alarm trap is sent when an alarm occurs (activated) or returns to normal state (deactivated). Alarm traps are logged in alarmTrapTable. Variables in this tr… | |
| 1.3.6.1.4.1.6302.2.1.5.2 | NotificationalarmActiveTrap | current | An alarm trap is sent when an alarm occurs (activated) Variables in this trap * alarmTime - Date and time when event occured (local time), including timezone i… | |
| 1.3.6.1.4.1.6302.2.1.5.3 | NotificationalarmCeaseTrap | current | An alarm trap is sent when an alarm returns to normal state (clear, deactivated). Variables in this trap: * alarmTime - Date and time when event occured (local… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Status | INTEGER { unknown(1), normal(2), warning(3), minor(4), major(5), critical(6), unmanaged(7), restricted(8), testing(9), disabled(10) } | current | This integer value represents the operational or administrative status of the system. Also used as alarm severity. Depending on situation there may be limits on allowed values. Operational values: (1) unknown - status h… |
| StatusChange | INTEGER { activated(1), deactivated(2) } | current | Indicates 'activated' (1) or 'deactivated' (2) alarm events. |