EFDMIM-MIB
49 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC1155-SMI | Counter enterprises OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.52 | Nodecabletron | |||
| 1.3.6.1.4.1.52.1 | NodecommsDevice | |||
| 1.3.6.1.4.1.52.1.6 | Nodesubsystem | |||
| 1.3.6.1.4.1.52.1.6.4 | Nodenb55 | |||
| 1.3.6.1.4.1.52.1.6.4.1 | Noderev1 | |||
| 1.3.6.1.4.1.52.1.6.4.1.1 | TableefdmimRingTable | not-accessible | mandatory | An ordered list of fddi nodes found on the Fddi Ring. |
| 1.3.6.1.4.1.52.1.6.4.1.1.1 | RowefdmimRingEntry | not-accessible | mandatory | An fddi ring entry containing information common to all stations in a token path. All FDDI ring Entry elements have an instance id made up of an index followed… |
| 1.3.6.1.4.1.52.1.6.4.1.1.1.1 | ColumnefdmimRingUpstreamMac | read-only | mandatory | This is the 6 octet canonical representation of the upstream neighbor's address. The upstream neighbor is the last MAC to receive the token before this MAC. Pl… |
| 1.3.6.1.4.1.52.1.6.4.1.1.1.2 | ColumnefdmimRingNodeClass | read-only | mandatory | Reports if the node is a station or a concentrator. Legal values are: station (0) concentrator (1) |
| 1.3.6.1.4.1.52.1.6.4.1.1.1.3 | ColumnefdmimRingMacs | read-only | mandatory | The number of MACs on this FDDI node. |
| 1.3.6.1.4.1.52.1.6.4.1.1.1.4 | ColumnefdmimRingNonMasterPhys | read-only | mandatory | The sum of the all A-Ports, B-Ports, and S-Ports on this node. |
| 1.3.6.1.4.1.52.1.6.4.1.1.1.5 | ColumnefdmimRingMasterPhys | read-only | mandatory | The number of master ports on this node. Results will range from 0 to 255. |
| 1.3.6.1.4.1.52.1.6.4.1.1.1.6 | ColumnefdmimRingTopology | read-only | mandatory | A bit-mapped representation of the current state of the node. if this state: Add 2**n where n= Wrapped Node: 0 Unattached Concentrator: 1 A-A twisted ring: 2 B… |
| 1.3.6.1.4.1.52.1.6.4.1.1.1.7 | ColumnefdmimRingDuplicate | read-only | mandatory | A bit-mapped representation of duplicate address information. if this state: Add 2**n where n= My Duplicate: 0 UNA Duplicate: 1 My Duplicate: This node has det… |
| 1.3.6.1.4.1.52.1.6.4.1.1.1.8 | ColumnefdmimRingMacAddress | read-only | mandatory | A canonical representation of the MAC address. |
| 1.3.6.1.4.1.52.1.6.4.1.2 | TableefdmimBdgPortTable | not-accessible | mandatory | This is a table of items that relate to bridge ports. Note there are 2 bridge (packet communication) ports on the EFDMIM, the ethernet port, and the FDDI port. |
| 1.3.6.1.4.1.52.1.6.4.1.2.1 | RowefdmimBdgPortEntry | not-accessible | mandatory | This is an individual entry in the bridge port table. Note that each entry will contain an instance id of 1 to represent the Ethernet port, and 2 to represent … |
| 1.3.6.1.4.1.52.1.6.4.1.2.1.1 | ColumnefdmimBdgPortState | read-only | optional | This object is returned only if spanning tree is enabled on the bridge. It returns a text string representing the current state of the port: 'Disabled', 'Liste… |
| 1.3.6.1.4.1.52.1.6.4.1.2.1.2 | ColumnefdmimBdgPortReceivedPkts | read-only | mandatory | The number of frames received by the bridge through this port. |
| 1.3.6.1.4.1.52.1.6.4.1.2.1.3 | ColumnefdmimBdgPortFilteredPkts | read-only | mandatory | The number of frames filtered by the bridge at this port. |
| 1.3.6.1.4.1.52.1.6.4.1.2.1.4 | ColumnefdmimBdgPortForwardedPkts | read-only | mandatory | The number of frames forwarded by the bridge through this port. |
| 1.3.6.1.4.1.52.1.6.4.1.2.1.5 | ColumnefdmimBdgPortTransmittedPkts | read-only | mandatory | The number of frames transmitted on this port. |
| 1.3.6.1.4.1.52.1.6.4.1.2.1.6 | ColumnefdmimBdgPortErrorPkts | read-only | mandatory | The number of frame errors detected on this port. |
| 1.3.6.1.4.1.52.1.6.4.1.3 | TableefdmimPhyTable | not-accessible | mandatory | This is a table of data that pertains only to phys on the efdmim. |
| 1.3.6.1.4.1.52.1.6.4.1.3.1 | RowefdmimPhyEntry | not-accessible | mandatory | This is a specific entry in the efdmimPhyTable that represents a specific attribute of a phy. Note that phy entries that refer to PHY-A will use an instance id… |
| 1.3.6.1.4.1.52.1.6.4.1.3.1.1 | ColumnefdmimPhyWithold | read-only | mandatory | Describes if the phy is enabled but not allowed to be used due to a topology problem. Legal values are: none (0) - PHY can be used withold-because-M-M (1) - Do… |
| 1.3.6.1.4.1.52.1.6.4.1.20 | ScalarefdmimDeviceStatus | read-only | mandatory | This is an Ascii string representation of the station's status. Responses include 'ON-LINE', 'STAND BY', and 'DISABLED'. |
| 1.3.6.1.4.1.52.1.6.4.1.21 | ScalarefdmimDeviceBdgName | read-write | mandatory | This is a user-defined name for the bridge. The name may contain up to 32 characters. |
| 1.3.6.1.4.1.52.1.6.4.1.22 | ScalarefdmimDeviceType | read-only | mandatory | This represents the type of bridge this is. The EFDMIM will always respond with 'EFDMIM'. |
| 1.3.6.1.4.1.52.1.6.4.1.23 | ScalarefdmimDeviceVersion | read-only | mandatory | A text string representing the firmware version installed in the bridge. |
| 1.3.6.1.4.1.52.1.6.4.1.24 | ScalarefdmimDeviceLocation | read-write | mandatory | A user defined name used to represent the location of the bridge. |
| 1.3.6.1.4.1.52.1.6.4.1.25 | ScalarefdmimDeviceUptime | read-only | mandatory | The number of seconds that have elapsed since the bridge reset or initialized. |
| 1.3.6.1.4.1.52.1.6.4.1.26 | ScalarefdmimDeviceDisableBridge | read-write | mandatory | States whether or not the bridge is disabled. To disable the bridge, set this value to 1. To enable the bridge, set this value to 0. |
| 1.3.6.1.4.1.52.1.6.4.1.27 | ScalarefdmimDeviceResetCounters | write-only | mandatory | This forces the EFDMIM to reset it's counters. Note: The efdmim will reset all it's counters except for the following: FDDI Frame count FDDI Error count FDDI L… |
| 1.3.6.1.4.1.52.1.6.4.1.28 | ScalarefdmimDeviceSwitchSettings | read-only | mandatory | This describes the dip and jumper settings physically set on the efdmim board. Switch multiply 2**n Root 0 Forward Broadcasts 1 Spanning Tree 2 BPDU Type 3 Byp… |
| 1.3.6.1.4.1.52.1.6.4.1.29 | ScalarefdmimDeviceReceivedPkts | read-only | mandatory | The aggregate number of frames received by the bridge through it's ports. |
| 1.3.6.1.4.1.52.1.6.4.1.30 | ScalarefdmimDeviceFilteredPkts | read-only | mandatory | The aggregate number of frames received and filtered by the bridge through it's ports. |
| 1.3.6.1.4.1.52.1.6.4.1.31 | ScalarefdmimDeviceForwardedPkts | read-only | mandatory | The aggregate number of frames received and forwarded by the bridge through it's ports. |
| 1.3.6.1.4.1.52.1.6.4.1.32 | ScalarefdmimDeviceTransmittedPkts | read-only | mandatory | The aggregate number of frames transmitted on it's ports. |
| 1.3.6.1.4.1.52.1.6.4.1.33 | ScalarefdmimDeviceErrorPkts | read-only | mandatory | The aggregate number of frame errors detected on it's ports |
| 1.3.6.1.4.1.52.1.6.4.1.34 | ScalarefdmimCfmState | read-only | mandatory | The efdmim's current CFM state. Legal values are: isolated (0) wrap-A (1) wrap-B (2) wrap-AB (3) through-A (4) through-B (5) through-AB (6) wrap-S (7) |
| 1.3.6.1.4.1.52.1.6.4.1.35 | ScalarefdmimBypassAttached | read-only | mandatory | Does the station has an optical bypass switch? |
| 1.3.6.1.4.1.52.1.6.4.1.36 | ScalarefdmimOscillations | read-only | mandatory | The number of times the claim/beacon process has completed since power-up. Note: This does not get reset when a reset counter command is issued. |
| 1.3.6.1.4.1.52.1.6.4.1.37 | ScalarefdmimRingUpTime | read-only | mandatory | The elapsed time in seconds since the most recent ring oscillation. Note: This returns 0 whenever the FDDI ring is down. |
| 1.3.6.1.4.1.52.1.6.4.1.38 | ScalarefdmimDownstreamMac | read-only | mandatory | The address of this station's downstream MAC in canonical format. |
| 1.3.6.1.4.1.52.1.6.4.1.39 | ScalarefdmimBypassStuck | read-only | mandatory | True if the optical bypass switch is stuck False if everything is ok. |
| 1.3.6.1.4.1.52.1.6.4.1.40 | ScalarefdmimMode | read-only | mandatory | Encapsulation bridges talk using the FDDI ring as a back-bone only. Translation bridges translates the packets into FDDI format. |
| 1.3.6.1.4.1.52.1.6.4.1.41 | ScalarefdmimRmtState | read-only | mandatory | This represents what state the RMT state machine is in. Legal values are: isolated (0) non-Op (1) ring-Op (2) detect (3) non-Op-Dup (4) ring-Op-Dup (5) directe… |
| 1.3.6.1.4.1.52.1.6.4.1.42 | ScalarefdmimDeviceBridgeAddr | read-only | mandatory | This returns the Bridge address in canonical format. |