EFM-CU-MIB
161 objects
The objects in this MIB module are used to manage the Ethernet in the First Mile (EFM) Copper (EFMCu) Interfaces 2BASE-TL and 10PASS-TS, defined in IEEE Draft P802.3ah/D3.3. The following reference is used throughout this MIB module: [802.3ah] refers to: IEEE Std 802.3ah-2004: 'IEEE Standard for Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications - Amendment: Media Access Control Parameters, Physical Layers and Management Parameters for Subscriber Access Networks', 07 September 2004. Of particular interest are Clause 61, 'Physical Coding Sublayer (PCS) and common specifications, type 10PASS-TS and type 2BASE-TL', Clause 30, 'Management', Clause 45, 'Management Data Input/Output (MDIO) Interface', Annex 62A, 'PMD profiles for 10PASS-TS' and Annex 63A, 'PMD profiles for 2BASE-TL'. Naming Conventions: Atn - Attenuation CO - Central Office CPE - Customer Premises Equipment EFM - Ethernet in the First Mile EFMCu - EFM Copper MDIO - Management Data Input/Output Mgn - Margin PAF - PME Aggregation Function PCS - Physical Coding Sublayer PMD - Physical Medium Dependent PME - Physical Medium Entity PSD - Power Spectral Density SNR - Signal to Noise Ratio TCPAM - Trellis Coded Pulse Amplitude Modulation Copyright (C) The Internet Society (2004). This version of this MIB module is part of RFC XXXX; see the RFC itself for full legal notices.
Imported Objects
| IF-MIB | ifIndex ifSpeed InterfaceIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 mib-2 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString PhysAddress RowStatus TEXTUAL-CONVENTION TruthValue |
| Zhone | ietfDrafts |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5504.10.1.7 | IdentityefmCuMIB | The objects in this MIB module are used to manage the Ethernet in the First Mile (EFM) Copper (EFMCu) Interfaces 2BASE-TL and 10PASS-TS, defined in IEEE Draft … | ||
| 1.3.6.1.4.1.5504.10.1.7.1 | NodeefmCuObjects | |||
| 1.3.6.1.4.1.5504.10.1.7.1.1 | NodeefmCuPort | |||
| 1.3.6.1.4.1.5504.10.1.7.1.1.0 | NodeefmCuPortNotifications | |||
| 1.3.6.1.4.1.5504.10.1.7.1.1.0.1 | NotificationefmCuLowBandwidth | current | This notification indicates that EFMCu port's data rate reached or dropped below a Low Bandwidth Threshold (i.e. bandwidth degradation happening in case of PAF… | |
| 1.3.6.1.4.1.5504.10.1.7.1.1.1 | TableefmCuPortConfTable | not-accessible | current | Table for Configuration of EFMCu 2BASE-TL/10PASS-TS (PCS) Ports. Entries in this table MUST be maintained in a persistent manner |
| 1.3.6.1.4.1.5504.10.1.7.1.1.1.1 | RowefmCuPortConfEntry | not-accessible | current | An entry in the EFMCu Port Configuration table. Each entry represents an EFMCu port indexed by the ifIndex. Note that an EFMCu PCS port runs on top of a single… |
| 1.3.6.1.4.1.5504.10.1.7.1.1.1.1.1 | ColumnefmCuPAFAdminState | read-write | current | Administrative (desired) state of the PAF of the EFMCu port (PCS). When 'disabled', PME Aggregation will not be performed by the PCS. No more than a single PME… |
| 1.3.6.1.4.1.5504.10.1.7.1.1.1.1.2 | ColumnefmCuPAFDiscoveryCode | read-write | current | PAF Discovery Code of the EFMCu port (PCS). A unique 6 Byte long code used by the Discovery function, when PAF is supported. PCS ports incapable of supporting … |
| 1.3.6.1.4.1.5504.10.1.7.1.1.1.1.3 | ColumnefmCuAdminProfile | read-write | current | Desired configuration Profile(s), common for all PMEs in the EFMCu port. This object is a list of pointers to entries in either efmCuPme2BProfileTable or efmCu… |
| 1.3.6.1.4.1.5504.10.1.7.1.1.1.1.4 | ColumnefmCuTargetDataRate | read-write | current | Desired EFMCu port 'net' (as seen across MII) Data Rate in Kbps, to be achieved during initialization, under spectral restrictions placed on each PME via efmCu… |
| 1.3.6.1.4.1.5504.10.1.7.1.1.1.1.5 | ColumnefmCuTargetWorstCaseSnrMgn | read-write | current | Desired EFMCu port SNR Margin to be achieved on all PMEs assigned to the port, during initializiation if efmCuTargetWorstCaseMode is TRUE. (The SNR margin is t… |
| 1.3.6.1.4.1.5504.10.1.7.1.1.1.1.6 | ColumnefmCuThreshLowBandwidth | read-write | current | This object configures the EFMCu port Low Bandwidth alarm threshold. When the current value of ifSpeed for this port reaches or drops below this threshold, an … |
| 1.3.6.1.4.1.5504.10.1.7.1.1.1.1.7 | ColumnefmCuLowBandwidthEnable | read-write | current | Indicates whether efmCuLowBandwidth notifications should be generated for this interface. Value of true(1) indicates that efmCuLowBandwidth notification is ena… |
| 1.3.6.1.4.1.5504.10.1.7.1.1.1.1.8 | ColumnefmCuTargetCurrentConditionMode | read-write | current | Note that 802.3ah recommends using default Target SNR Margin of 5dB for 2BASE-TL ports and 6dB for 10PASS-TS ports in order to achieve mean Bit Error Rate (BER… |
| 1.3.6.1.4.1.5504.10.1.7.1.1.1.1.9 | ColumnefmCuTargetCurrentConditionSnrMgn | read-write | current | Desired EFMCu port SNR Margin to be achieved on all PMEs assigned to the port, during initializiation if efmCuTargetCurrentConditionMode is TRUE. (The SNR marg… |
| 1.3.6.1.4.1.5504.10.1.7.1.1.1.1.10 | ColumnefmCuTargetWorstCaseMode | read-write | current | Note that 802.3ah recommends using default Target SNR Margin of 5dB for 2BASE-TL ports and 6dB for 10PASS-TS ports in order to achieve mean Bit Error Rate (BER… |
| 1.3.6.1.4.1.5504.10.1.7.1.1.1.1.11 | ColumnefmCuPAFAutoDiscovery | read-write | current | Setting this value to disabled causes the CO and CPE to cease EFM Discovery communications. Bond groups and members must by created manually. Setting this valu… |
| 1.3.6.1.4.1.5504.10.1.7.1.1.1.1.12 | ColumnefmCuPmeErrorClearStats | read-write | current | This leaf is used to clear Error Monitor statistics. When the value is set to clearStats (2) the stats are cleared for this port. Once the stats have been clea… |
| 1.3.6.1.4.1.5504.10.1.7.1.1.1.1.13 | ColumnefmCuPmeSnrClearStats | read-write | current | This leaf is used to clear Snr Monitor statistics. When the value is set to clearStats (2) the stats are cleared for this port. Once the stats have been cleare… |
| 1.3.6.1.4.1.5504.10.1.7.1.1.2 | TableefmCuPortCapabilityTable | not-accessible | current | Table for Capabilities of EFMCu 2BASE-TL/10PASS-TS (PCS) Ports. Entries in this table MUST be maintained in a persistent manner |
| 1.3.6.1.4.1.5504.10.1.7.1.1.2.1 | RowefmCuPortCapabilityEntry | not-accessible | current | An entry in the EFMCu Port Capability table. Each entry represents an EFMCu port indexed by the ifIndex. Note that an EFMCu PCS port runs on top of a single or… |
| 1.3.6.1.4.1.5504.10.1.7.1.1.2.1.1 | ColumnefmCuPAFSupported | read-only | current | PME Aggregation Function (PAF) Capability of the EFMCu port (PCS). This object has a value of true(1) when the PCS can perform PME aggregation on the available… |
| 1.3.6.1.4.1.5504.10.1.7.1.1.2.1.2 | ColumnefmCuPeerPAFSupported | read-only | current | PME Aggregation Function (PAF) Capability of the EFMCu port (PCS) link partner. This object has a value of true(1) when the remote PCS can perform PME aggregat… |
| 1.3.6.1.4.1.5504.10.1.7.1.1.2.1.3 | ColumnefmCuPAFCapacity | read-only | current | Number of PMEs that can be aggregated by the local PAF. The number of PMEs currently assigned to a particular EFMCu port (efmCuNumPMEs) is never greater than e… |
| 1.3.6.1.4.1.5504.10.1.7.1.1.2.1.4 | ColumnefmCuPeerPAFCapacity | read-only | current | Number of PMEs that can be aggregated by the PAF of the peer Phy (PCS port). Value of 0 is returned when peer PAF Capacity is unknown (peer cannot be reached).… |
| 1.3.6.1.4.1.5504.10.1.7.1.1.3 | TableefmCuPortStatusTable | not-accessible | current | This table provides overall status information of EFMCu 2BASE-TL/10PASS-TS ports. This table contains live data from the equipment. As such, it is NOT persiste… |
| 1.3.6.1.4.1.5504.10.1.7.1.1.3.1 | RowefmCuPortStatusEntry | not-accessible | current | An entry in the EFMCu Port Status table. Each entry represents an EFMCu port indexed by the ifIndex. Note that an EFMCu PCS port runs on top of a single or mul… |
| 1.3.6.1.4.1.5504.10.1.7.1.1.3.1.1 | ColumnefmCuFltStatus | read-only | current | EFMCu (PCS) port Fault Status. This is a bitmap of possible conditions. The various bit positions are: noPeer - peer PHY cannot be reached (e.g. no PMEs attach… |
| 1.3.6.1.4.1.5504.10.1.7.1.1.3.1.2 | ColumnefmCuPortSide | read-only | current | EFM port mode of operation (subtype). The value of 'subscriber' indicates the port is designated as '-R' subtype (all PMEs assigned to this port are of subtype… |
| 1.3.6.1.4.1.5504.10.1.7.1.1.3.1.3 | ColumnefmCuNumPMEs | read-only | current | Number of PMEs that is currently aggregated by the local PAF (assigned to the EFMCu port using ifStackTable). This number is never greater than efmCuPAFCapacit… |
| 1.3.6.1.4.1.5504.10.1.7.1.1.3.1.4 | ColumnefmCuPAFInErrors | read-only | current | A number of fragments that have been received across the gamma interface with RxErr asserted and discarded. This read-only counter is inactive (not incremented… |
| 1.3.6.1.4.1.5504.10.1.7.1.1.3.1.5 | ColumnefmCuPAFInSmallFragments | read-only | current | A number of fragments smaller than minFragmentSize (64 Bytes), that have been received across the gamma interface and discarded. This read-only counter is inac… |
| 1.3.6.1.4.1.5504.10.1.7.1.1.3.1.6 | ColumnefmCuPAFInLargeFragments | read-only | current | A number of fragments larger than maxFragmentSize (512 Bytes), that have been received across the gamma interface and discarded. This read-only counter is inac… |
| 1.3.6.1.4.1.5504.10.1.7.1.1.3.1.7 | ColumnefmCuPAFInBadFragments | read-only | current | A number of fragments which do not fit into the sequence expected by the frame assembly function, that have been received across the gamma interface and discar… |
| 1.3.6.1.4.1.5504.10.1.7.1.1.3.1.8 | ColumnefmCuPAFInLostFragments | read-only | current | A number of gaps in the sequence of fragments, that have been received across the gamma interface (the frame buffer is flushed to the next valid frame start, w… |
| 1.3.6.1.4.1.5504.10.1.7.1.1.3.1.9 | ColumnefmCuPAFInLostStarts | read-only | current | A number of missing StartOfPacket indicators expected by the frame assembly function. This read-only counter is inactive when the PAF is unsupported or disable… |
| 1.3.6.1.4.1.5504.10.1.7.1.1.3.1.10 | ColumnefmCuPAFInLostEnds | read-only | current | A number of missing EndOfPacket indicators expected by the frame assembly function. This read-only counter is inactive when the PAF is unsupported or disabled.… |
| 1.3.6.1.4.1.5504.10.1.7.1.1.3.1.11 | ColumnefmCuPAFInOverflows | read-only | current | A number of fragements, received accross the gamma interface and discarded, which would have caused the frame assembly buffer to overflow. This read-only count… |
| 1.3.6.1.4.1.5504.10.1.7.1.2 | NodeefmCuPme | |||
| 1.3.6.1.4.1.5504.10.1.7.1.2.0 | NodeefmCuPmeNotifications | |||
| 1.3.6.1.4.1.5504.10.1.7.1.2.0.1 | NotificationefmCuPmeLineAtnCrossing | current | This notification indicates that the loop attenuation threshold (as per the efmCuPmeThreshLineAtn value) has been reached/exceeded for the 2BASE-TL/10PASS-TS P… | |
| 1.3.6.1.4.1.5504.10.1.7.1.2.0.2 | NotificationefmCuPmeSnrMgnCrossing | current | This notification indicates that the SNR margin threshold (as per the efmCuPmeThreshMinSnrMgn efmCuPmeThreshMaxSnrMgnDelta values) has been reached/exceeded fo… | |
| 1.3.6.1.4.1.5504.10.1.7.1.2.0.3 | NotificationefmCuPmeDeviceFault | current | This notification indicates that a fault in the PME has been detected by a vendor specific diagnostic or a self-test. Generation of this notification is contro… | |
| 1.3.6.1.4.1.5504.10.1.7.1.2.0.4 | NotificationefmCuPmeConfigInitFailure | current | This notification indicates that PME initialization has failed, due to inability of the PME link to achieve requested configuration profile. Generation of this… | |
| 1.3.6.1.4.1.5504.10.1.7.1.2.0.5 | NotificationefmCuPmeProtocolInitFailure | current | This notification indicates that peer PME was using incompatible protocol during initialization. Generation of this notification is controlled by the efmCuPmeP… | |
| 1.3.6.1.4.1.5504.10.1.7.1.2.0.6 | NotificationefmCuPmeSnrMgnCrossingClear | current | This notification indicates that the SNR margin threshold (as per the efmCuPmeThreshMinSnrMgn efmCuPmeThreshMaxSnrMgnDelta values) has been returned within the… | |
| 1.3.6.1.4.1.5504.10.1.7.1.2.0.7 | NotificationefmCuPmeErrorThreshEfmTrafficDisable | current | This notification indicates that the Error threshold has seen errors for the efmCuPmeErrorThreshMonInterval consecutive seconds for the 2BASE-TL/10PASS-TS PME.… | |
| 1.3.6.1.4.1.5504.10.1.7.1.2.0.8 | NotificationefmCuPmeErrorThreshEfmTrafficEnable | current | This notification indicates that the Error threshold has seen no errors for the efmCuPmeErrorThreshMonClrInterval consecutive seconds for the 2BASE-TL/10PASS-T… | |
| 1.3.6.1.4.1.5504.10.1.7.1.2.0.9 | NotificationefmCuPmeBondGroupTrafficDisabled | current | This notification indicates that the Efm Bond Group has no links which are active and capable of allowing traffic to traverse the bond group. This notification… | |
| 1.3.6.1.4.1.5504.10.1.7.1.2.0.10 | NotificationefmCuPmeBondGroupTrafficEnabled | current | This notification indicates that the Efm Bond Group has at least one link which is active and capable of allowing traffic to traverse the link. This notificati… | |
| 1.3.6.1.4.1.5504.10.1.7.1.2.0.11 | NotificationefmCuPmeLinkTrafficDisabled | current | This notification indicates that the Efm link is no longer capable of allowing traffic to traverse the link. This notification indicates that Efm traffic will … | |
| 1.3.6.1.4.1.5504.10.1.7.1.2.0.12 | NotificationefmCuPmeLinkTrafficEnabled | current | This notification indicates that the Efm link is now capable of allowing traffic to traverse the link. This notification indicates that Efm traffic will resume… | |
| 1.3.6.1.4.1.5504.10.1.7.1.2.1 | TableefmCuPmeConfTable | not-accessible | current | Table for Configuration of common aspects for EFMCu 2BASE-TL/10PASS-TS PME ports (modems). Configuration of aspects specific to 2BASE-TL or 10PASS-TS PME types… |
| 1.3.6.1.4.1.5504.10.1.7.1.2.1.1 | RowefmCuPmeConfEntry | not-accessible | current | An entry in the EFMCu PME Configuration table. Each entry represents common aspects of an EFMCu PME port indexed by the ifIndex. Note that an EFMCu PME port ca… |
| 1.3.6.1.4.1.5504.10.1.7.1.2.1.1.1 | ColumnefmCuPmeAdminSubType | read-write | current | Administrative (desired) sub-type of the PME. Possible values are: ieee2BaseTLO - PME shall operate as 2BaseTL-O ieee2BaseTLR - PME shall operate as 2BaseTL-R … |
| 1.3.6.1.4.1.5504.10.1.7.1.2.1.1.2 | ColumnefmCuPmeAdminProfile | read-write | current | Desired PME configuration Profile. This object is a pointer to an entry in either efmCuPme2BProfileTable or efmCuPme10PProfileTable, depending on the current o… |
| 1.3.6.1.4.1.5504.10.1.7.1.2.1.1.3 | ColumnefmCuPAFRemoteDiscoveryCode | read-write | current | PAF Remote Discovery Code of the PME port at CO. A 6 Byte long Discovery Code of the peer PCS connected via the PME. Reading this object results in a Discovery… |
| 1.3.6.1.4.1.5504.10.1.7.1.2.1.1.4 | ColumnefmCuPmeThreshLineAtn | read-write | current | Desired Line Attenuation Threshold for the 2B/10P PME. This object configures the line attenuation alarm threshold. When the current value of Line Attenuation … |
| 1.3.6.1.4.1.5504.10.1.7.1.2.1.1.5 | ColumnefmCuPmeThreshMinSnrMgn | read-write | current | Desired Min SNR Margin Threshold for the 2B/10P PME. This object configures the Min SNR margin alarm threshold. When the current value of SNR Margin drops belo… |
| 1.3.6.1.4.1.5504.10.1.7.1.2.1.1.6 | ColumnefmCuPmeLineAtnCrossingEnable | read-write | current | Indicates whether efmCuPmeLineAtnCrossing notifications should be generated for this interface. Value of true(1) indicates that efmCuPmeLineAtnCrossing notific… |
| 1.3.6.1.4.1.5504.10.1.7.1.2.1.1.7 | ColumnefmCuPmeSnrMgnCrossingTrapEnable | read-write | current | Indicates whether efmCuPmeSnrMgnCrossing notifications should be generated for this interface. Value of true(1) indicates that efmCuPmeSnrMgnCrossing notificat… |
| 1.3.6.1.4.1.5504.10.1.7.1.2.1.1.8 | ColumnefmCuPmeDeviceFaultEnable | read-write | current | Indicates whether efmCuPmeDeviceFault notifications should be generated for this interface. Value of true(1) indicates that efmCuPmeDeviceFault notification is… |
| 1.3.6.1.4.1.5504.10.1.7.1.2.1.1.9 | ColumnefmCuPmeConfigInitFailEnable | read-write | current | Indicates whether efmCuPmeConfigInitFailure notifications should be generated for this interface. Value of true(1) indicates that efmCuPmeConfigInitFailure not… |
| 1.3.6.1.4.1.5504.10.1.7.1.2.1.1.10 | ColumnefmCuPmeProtocolInitFailEnable | read-write | current | Indicates whether efmCuPmeProtocolInitFailure notifications should be generated for this interface. Value of true(1) indicates that efmCuPmeProtocolInitFailure… |
| 1.3.6.1.4.1.5504.10.1.7.1.2.1.1.11 | ColumnefmCuPmeThreshMaxSnrMgnDelta | read-write | current | Desired Max SNR Margin Threshold Delta for the 2B/10P PME. This object configures the Max SNR margin threshold delta. When the current value of SNR Margin exce… |
| 1.3.6.1.4.1.5504.10.1.7.1.2.1.1.12 | ColumnefmCuPmeMaintenanceMode | read-write | current | Administrative (desired) Maintenance of the PME. Possible values are: off - No monitoring of SNR values manual - Retrain line only once during the Maintenance … |
| 1.3.6.1.4.1.5504.10.1.7.1.2.1.1.13 | ColumnefmCuPmeMaintenanceStartTime | read-write | current | This will represent the maintenance window start time for the maintenance to retrain the link in manual maintenance mode or the monitoring of the snr value wit… |
| 1.3.6.1.4.1.5504.10.1.7.1.2.1.1.14 | ColumnefmCuPmeMaintenanceEndTime | read-write | current | This will represent the maintenance window end time for the maintenance to retrain the link in manual maintenance mode or the monitoring of the snr value with … |
| 1.3.6.1.4.1.5504.10.1.7.1.2.1.1.15 | ColumnefmCuPmeSnrMonitoringInterval | read-write | current | This will represent the snr monitoring interval for the time elapsed between the monitoring of the snr value with respect to the snr threshold values specified… |
| 1.3.6.1.4.1.5504.10.1.7.1.2.1.1.16 | ColumnefmCuPmeErrorThreshMonEnable | read-write | current | This will enable/disable the error threshold monitoring. Error threshold monitoring looks for errors on the physical line. When there have been efmCuPmeErrorTh… |
| 1.3.6.1.4.1.5504.10.1.7.1.2.1.1.17 | ColumnefmCuPmeErrorThreshMonNotifyEnable | read-write | current | This will enable/disable the error threshold monitoring notification (via cli or alarm manager) when an error threshold has been exceeded or cleared. |
| 1.3.6.1.4.1.5504.10.1.7.1.2.1.1.18 | ColumnefmCuPmeErrorThreshMonInterval | read-write | current | This will specify the number of consecutive seconds of detecting errors that, once reached, will cause the physical line to be deemed a poor performer and caus… |
| 1.3.6.1.4.1.5504.10.1.7.1.2.1.1.19 | ColumnefmCuPmeErrorThreshMonClrInterval | read-write | current | This will specify the number of consecutive error-free seconds that must be achieved in order to declare the physical line usable for carrying data traffic. Se… |
| 1.3.6.1.4.1.5504.10.1.7.1.2.1.1.20 | ColumnefmCuPmeLinkTrfcDisablTrapEnable | read-write | current | This will enable/disable the link traffic disable notification (via cli or alarm manager) when a link is capable or no longer capable of passing traffic. |
| 1.3.6.1.4.1.5504.10.1.7.1.2.2 | TableefmCuPmeCapabilityTable | not-accessible | current | Table for Configuration of common aspects for EFMCu 2BASE-TL/10PASS-TS PME ports (modems). Configuration of aspects specific to 2BASE-TL or 10PASS-TS PME types… |
| 1.3.6.1.4.1.5504.10.1.7.1.2.2.1 | RowefmCuPmeCapabilityEntry | not-accessible | current | An entry in the EFMCu PME Capability table. Each entry represents common aspects of an EFMCu PME port indexed by the ifIndex. Note that an EFMCu PME port can b… |
| 1.3.6.1.4.1.5504.10.1.7.1.2.2.1.1 | ColumnefmCuPmeSubTypesSupported | read-only | current | PME supported sub-types. This is a bitmap of possible sub-types. The various bit positions are: ieee2BaseTLO - PME is capable of operating as 2BaseTL-O ieee2Ba… |
| 1.3.6.1.4.1.5504.10.1.7.1.2.3 | TableefmCuPmeStatusTable | not-accessible | current | This table provides common status information of EFMCu 2BASE-TL/10PASS-TS PME ports. Status information specific to 10PASS-TS PME is represented in efmCuPme10P… |
| 1.3.6.1.4.1.5504.10.1.7.1.2.3.1 | RowefmCuPmeStatusEntry | not-accessible | current | An entry in the EFMCu PME Status table. Each entry represents common aspects of an EFMCu PME port indexed by the ifIndex. Note that an EFMCu PME port can be st… |
| 1.3.6.1.4.1.5504.10.1.7.1.2.3.1.1 | ColumnefmCuPmeOperStatus | read-only | current | Current PME link Operational Status. Possible values are: up(1) - link is Up and ready to pass 64/65B encoded frames or fragments. downNotReady(2) - link is Do… |
| 1.3.6.1.4.1.5504.10.1.7.1.2.3.1.2 | ColumnefmCuPmeFltStatus | read-only | current | Current/Last PME link Fault Status. This is a bitmap of possible conditions. The various bit positions are: lossOfFraming - Loss of Framing for 10P or Loss of … |
| 1.3.6.1.4.1.5504.10.1.7.1.2.3.1.3 | ColumnefmCuPmeOperSubType | read-only | current | Current operational sub-type of the PME. Possible values are: ieee2BaseTLO - PME operates as 2BaseTL-O ieee2BaseTLR - PME operates as 2BaseTL-R ieee10PassTSO -… |
| 1.3.6.1.4.1.5504.10.1.7.1.2.3.1.4 | ColumnefmCuPmeOperProfile | read-only | current | PME current operating Profile. This object is a pointer to an entry in either efmCuPme2BProfileTable or efmCuPme10PProfileTable, depending on the current opera… |
| 1.3.6.1.4.1.5504.10.1.7.1.2.3.1.5 | ColumnefmCuPmeSnrMgn | read-only | current | The current Signal-to-Noise Ratio (SNR) margin with respect to the received signal as perceived by the local PME. The value of 65535 is returned when PME is do… |
| 1.3.6.1.4.1.5504.10.1.7.1.2.3.1.6 | ColumnefmCuPmePeerSnrMgn | read-only | current | The current SNR margin in dB with respect to the received signal, as perceived by the remote (link partner) PME. The value of 65535 is returned when PME is dow… |
| 1.3.6.1.4.1.5504.10.1.7.1.2.3.1.7 | ColumnefmCuPmeLineAtn | read-only | current | The current Line Attenuation in dB as perceived by the local PME. The value of 65535 is returned when PME is down or initializing. If a Clause 45 MDIO Interfac… |
| 1.3.6.1.4.1.5504.10.1.7.1.2.3.1.8 | ColumnefmCuPmePeerLineAtn | read-only | current | The current Line Attenuation in dB as perceived by the remote (link partner) PME. The value of 65535 is returned when PME is down or initializing. This object … |
| 1.3.6.1.4.1.5504.10.1.7.1.2.3.1.9 | ColumnefmCuPmeTCCodingErrors | read-only | current | A number of 64/65-octet encapsulation errors. This counter is incremented for each 64/65-octet encapsulation error detected by the 64/65-octet receive function… |
| 1.3.6.1.4.1.5504.10.1.7.1.2.3.1.10 | ColumnefmCuPmeTCCrcErrors | read-only | current | A number of TC-CRC errors. This counter is incremented for each TC-CRC error detected by the 64/65-octet receive function (see 61.3.3.3 and Figure 61-19). The … |
| 1.3.6.1.4.1.5504.10.1.7.1.2.3.1.11 | ColumnefmCuPmeSnrCrossingCnt | read-only | current | A count of the number of times that the Snr Margin crossed the threshold. This counter is incremented for each time the target snr margin specified by efmCuPme… |
| 1.3.6.1.4.1.5504.10.1.7.1.2.3.1.12 | ColumnefmCuPmeTCDownCnt | read-only | current | A count of the number of times that the TC Layer went down since the line has obtained link. |
| 1.3.6.1.4.1.5504.10.1.7.1.2.3.1.13 | ColumnefmCuPmeErrorTCDownCnt | read-only | current | A count of the number of times that the TC Layer was forced down because of the Error Monitoring Feature. |
| 1.3.6.1.4.1.5504.10.1.7.1.2.3.1.14 | ColumnefmCuPmeErrorRestartCnt | read-only | current | A count of the number of times that the line was forced to retrain because of the Error Monitoring Feature. |
| 1.3.6.1.4.1.5504.10.1.7.1.2.3.1.15 | ColumnefmCuPmeSnrRestartCnt | read-only | current | A count of the number of times that the line was forced to retrain because of the Snr Monitoring Feature. |
| 1.3.6.1.4.1.5504.10.1.7.1.2.3.1.16 | ColumnefmCuPmeErrorConsecutiveSec | read-only | current | A count of the number of consecutive seconds with an error. This value is set to zero when there is a second without an error. |
| 1.3.6.1.4.1.5504.10.1.7.1.2.3.1.17 | ColumnefmCuPmeErrorMaxConsecutiveSec | read-only | current | A count of the Max number of consecutive seconds with an error where there has been no need for Error Monitoring to take action on the link. |
| 1.3.6.1.4.1.5504.10.1.7.1.2.5 | NodeefmCuPme2B | |||
| 1.3.6.1.4.1.5504.10.1.7.1.2.5.2 | TableefmCuPme2BProfileTable | not-accessible | current | This table supports definitions of administrative and operating Profiles for 2BASE-TL PMEs. First 14 entries in this table SHALL always be defined as follows (… |
| 1.3.6.1.4.1.5504.10.1.7.1.2.5.2.1 | RowefmCuPme2BProfileEntry | not-accessible | current | Each entry corresponds to a single 2BASE-TL PME profile. Each profile contains a set of parameters, used either for configuration or representation of a 2BASE-… |
| 1.3.6.1.4.1.5504.10.1.7.1.2.5.2.1.1 | ColumnefmCuPme2BProfileIndex | not-accessible | current | 2BASE-TL PME Profile index. This object is the unique index associated with this profile. Entries in this table are referenced via efmCuAdminProfile or efmCuPm… |
| 1.3.6.1.4.1.5504.10.1.7.1.2.5.2.1.2 | ColumnefmCuPme2BProfileDescr | read-create | current | A textual string containing information about 2BASE-TL PME Profile. The string MAY include information about data rate and spectral limitations of this particu… |
| 1.3.6.1.4.1.5504.10.1.7.1.2.5.2.1.3 | ColumnefmCuPme2BRegion | read-create | current | Power Spectral Density (PSD) Regional settings as specified in the relevant Regional Annex of [G.991.2]. Regional settings place limitations on the max allowed… |
| 1.3.6.1.4.1.5504.10.1.7.1.2.5.2.1.4 | ColumnefmCuPme2BDataRate | read-create | current | 2BASE-TL PME Data Rate. The rate is fixed when the value of this object is n x 64Kbps, where n=3..60 for 16-TCPAM and n=12..89 for 32-TCPAM. The value of 0 in … |
| 1.3.6.1.4.1.5504.10.1.7.1.2.5.2.1.5 | ColumnefmCuPme2BPower | read-create | current | Signal Transmit Power. Multiple of 0.5dBm. The value of 0 in the administrative profile means that the signal transmit power is not fixed and should be set to … |
| 1.3.6.1.4.1.5504.10.1.7.1.2.5.2.1.6 | ColumnefmCuPme2BConstellation | read-create | current | TCPAM Constellation of the 2BASE-TL PME. The possible values are: adaptive(0) - either 16- or 32-TCPAM tcpam16(1) - 16-TCPAM tcpam32(2) - 32-TCPAM tcpam4(3) - … |
| 1.3.6.1.4.1.5504.10.1.7.1.2.5.2.1.7 | ColumnefmCuPme2BProfileRowStatus | read-create | current | This object controls creation/deletion of the associated entry in efmCuPme2BProfileTable per the semantics of RowStatus. If an 'active' entry is referenced via… |
| 1.3.6.1.4.1.5504.10.1.7.1.2.5.2.1.8 | ColumnefmCuPmeNtr | read-create | current | Network Time and Power The possible values are: localOsc(1) - use local osc for timimg refClk8khz(2) - use Backplane 8KHZ clock for timimg |
| 1.3.6.1.4.1.5504.10.1.7.1.2.6 | NodeefmCuPme10P | |||
| 1.3.6.1.4.1.5504.10.1.7.1.2.6.1 | TableefmCuPme10PProfileTable | not-accessible | current | This table supports definitions of configuration profiles for 10PassTL PMEs. First 22 entries in this table SHALL always be defined as follows (see 802.3ah Ann… |
| 1.3.6.1.4.1.5504.10.1.7.1.2.6.1.1 | RowefmCuPme10PProfileEntry | not-accessible | current | Each entry corresponds to a single 10PASS-TS PME profile. Each profile contains a set of parameters, used either for configuration or representation of a 10PAS… |
| 1.3.6.1.4.1.5504.10.1.7.1.2.6.1.1.1 | ColumnefmCuPme10PProfileIndex | not-accessible | current | 10PASS-TS PME Profile Index. This object is the unique index associated with this profile. Entries in this table are referenced via efmCuAdminProfile or efmCuP… |
| 1.3.6.1.4.1.5504.10.1.7.1.2.6.1.1.2 | ColumnefmCuPme10PProfileDescr | read-create | current | A textual string containing information about 10PASS-TS PME Profile. The string MAY include information about data rate and spectral limitations of this partic… |
| 1.3.6.1.4.1.5504.10.1.7.1.2.6.1.1.3 | ColumnefmCuPme10PBandplanPSDMskProfile | read-create | current | 10PASS-TS PME Bandplan and PSD Mask profile, as specified in 802.3ah Annex 62A. Possible values are: Profile Name PSD Mask Bands Bandplan profile1(1) - T1.424/… |
| 1.3.6.1.4.1.5504.10.1.7.1.2.6.1.1.4 | ColumnefmCuPme10PUPBOReferenceProfile | read-create | current | 10PASS-TS PME Upstream Power Back-Off (UPBO) Reference PSD Profile, as specified in 802.3ah Annex 62A. Possible values are: profile1(1) - T1.424/T-U Noise A M1… |
| 1.3.6.1.4.1.5504.10.1.7.1.2.6.1.1.5 | ColumnefmCuPme10PBandNotchProfiles | read-create | current | 10PASS-TS PME Egress Control Band Notch Profile bitmap, as specified in 802.3ah Annex 62A. Possible values are: Profile Name G.991.3 T1.424/T-U TS101 270-1 Sta… |
| 1.3.6.1.4.1.5504.10.1.7.1.2.6.1.1.6 | ColumnefmCuPme10PPayloadURateProfile | read-create | current | 10PASS-TS PME Upstream Payload Rate Profile, as specified in 802.3ah Annex 62A. Possible values are: profile5(5) - 2.5 Mbps profile10(10) - 5 Mbps profile15(15… |
| 1.3.6.1.4.1.5504.10.1.7.1.2.6.1.1.7 | ColumnefmCuPme10PPayloadDRateProfile | read-create | current | 10PASS-TS PME Downstream Payload Rate Profile, as specified in 802.3ah Annex 62A. Possible values are: profile5(5) - 2.5 Mbps profile10(10) - 5 Mbps profile15(… |
| 1.3.6.1.4.1.5504.10.1.7.1.2.6.1.1.8 | ColumnefmCuPme10PProfileRowStatus | read-create | current | This object controls creation/deletion of the associated entry in efmCuPme10PProfileTable per the semantics of RowStatus. If an active entry is referenced via … |
| 1.3.6.1.4.1.5504.10.1.7.1.2.6.2 | TableefmCuPme10PStatusTable | not-accessible | current | Table reflecting status of EFMCu 10PASS-TS PMEs (modems). |
| 1.3.6.1.4.1.5504.10.1.7.1.2.6.2.1 | RowefmCuPme10PStatusEntry | not-accessible | current | An entry in the EFMCu 10PASS-TS PME Status table. |
| 1.3.6.1.4.1.5504.10.1.7.1.2.6.2.1.1 | ColumnefmCuPme10PElectricalLength | read-only | current | Electrical Length in meters as perceived by the 10PASS-TS PME after the link is established. The value of 65535 is returned if the link is Down or Initializing… |
| 1.3.6.1.4.1.5504.10.1.7.1.2.6.2.1.2 | ColumnefmCuPme10PFECCorrectedBlocks | read-only | current | A count of received and corrected FEC codewords in 10PASS-TS PME. This object maps to aPMEFECCorrectedBlocks attribute in clause 30. If a Clause 45 MDIO Interf… |
| 1.3.6.1.4.1.5504.10.1.7.1.2.6.2.1.3 | ColumnefmCuPme10PFECUncorrectedBlocks | read-only | current | A count of received FEC codewords in 10PASS-TS PME, which are uncorrectable. This object maps to aPMEFECUncorrectableBlocks attribute in clause 30. If a Clause… |
| 1.3.6.1.4.1.5504.10.1.7.1.3 | TableifAvailableStackTable | not-accessible | current | This table, modeled after ifStackTable from [IF-MIB], contains information on the possible 'on-top-of' relationships between the multiple sub-layers of network… |
| 1.3.6.1.4.1.5504.10.1.7.1.3.1 | RowifAvailableStackEntry | not-accessible | current | Information on a particular relationship between two sub-layers, specifying that one sub-layer (PCS) runs on 'top' of the other sub-layer (PME). Each sub-layer… |
| 1.3.6.1.4.1.5504.10.1.7.1.3.1.1 | ColumnifAvailableStackHigherLayer | not-accessible | current | The value of ifIndex corresponding to the higher sub-layer of the 'cross-connect capability' relationship, i.e., the PCS sub-layer which MAY run on 'top' of th… |
| 1.3.6.1.4.1.5504.10.1.7.1.3.1.2 | ColumnifAvailableStackLowerLayer | not-accessible | current | The value of ifIndex corresponding to the lower sub-layer of the 'cross-connect capability' relationship, i.e., the PME sub-layer which MAY run 'below' the PCS… |
| 1.3.6.1.4.1.5504.10.1.7.1.3.1.3 | ColumnifAvailableStackStatus | read-only | current | The status of the 'cross-connect capability' relationship between two sub-layers. The following values are defined: capable(1) - the PME sub-layer interface, i… |
| 1.3.6.1.4.1.5504.10.1.7.1.4 | NodeefmCuRegeneratorStats | |||
| 1.3.6.1.4.1.5504.10.1.7.1.4.1 | TableefmCuRegeneratorStatusTable | not-accessible | current | Each EFMCu Regenerator Status table contains performance status aspects of SHDSL modems for nodes on a span of SHDSL regenerators connected to an EFMCu SHDSL p… |
| 1.3.6.1.4.1.5504.10.1.7.1.4.1.1 | RowefmCuRegeneratorStatusEntry | not-accessible | current | This is an entry in the EFMCu Regenerator Status table. Each entry contains performance status aspects of a particular SHDSL modem for a node on a span of SHDS… |
| 1.3.6.1.4.1.5504.10.1.7.1.4.1.1.1 | ColumnefmCuRegenIndex | not-accessible | current | The unit address of the regenerator node in the SHDSL span. 1 = STU C (CO) 2 = STU R (CPE) 3 through 10 = Regenerators 1 - 8 |
| 1.3.6.1.4.1.5504.10.1.7.1.4.1.1.2 | ColumnefmCuRegenSide | not-accessible | current | Specification if the modem is on the network or customer side of the node. Repeaters have both network (up stream) and customer (down stream) facing modems. Th… |
| 1.3.6.1.4.1.5504.10.1.7.1.4.1.1.3 | ColumnefmCuRegenSNR | read-only | current | The current SHDSL Signal-to-Noise Ratio (SNR) margin with respect to the received signal as perceived by the specific SHDSL modem in the span. The value is rep… |
| 1.3.6.1.4.1.5504.10.1.7.1.4.1.1.4 | ColumnefmCuRegenLineAttn | read-only | current | The current SHDSL Line Attenuation as perceived by the specific SHDSL modem in the span. The value is reported in tenths of a dB. A value of 65535 is returned … |
| 1.3.6.1.4.1.5504.10.1.7.1.4.1.1.5 | ColumnefmCuRegenCRC | read-only | current | The current SHDSL count of CRC Anomalies as perceived by the specific SHDSL modem in the span. This value is reset when the port is down. |
| 1.3.6.1.4.1.5504.10.1.7.1.4.1.1.6 | ColumnefmCuRegenES | read-only | current | The current SHDSL count of Errored Seconds as perceived by the specific SHDSL modem in the span. This value is reset when the port is down. |
| 1.3.6.1.4.1.5504.10.1.7.1.4.1.1.7 | ColumnefmCuRegenSES | read-only | current | The current SHDSL count of Severely Errored Seconds as perceived by the specific SHDSL modem in the span. This value is reset when the port is down. |
| 1.3.6.1.4.1.5504.10.1.7.1.4.1.1.8 | ColumnefmCuRegenUAS | read-only | current | The current SHDSL count of Unavailable Seconds as perceived by the specific SHDSL modem in the span. This value is reset when the port is down. |
| 1.3.6.1.4.1.5504.10.1.7.1.4.1.1.9 | ColumnefmCuRegenLOSWS | read-only | current | The current SHDSL Loss of Sync Word Second (LOSWS) defect count as perceived by the specific SHDSL modem in the span. This value is reset when the port is down. |
| 1.3.6.1.4.1.5504.10.1.7.1.4.1.1.10 | ColumnefmCuRegenDCAlarm | read-only | current | The DC Continuity Fault indicator. This is used to indicate conditions that interfere with span powering such as shorts and open circuits. A value of No is ret… |
| 1.3.6.1.4.1.5504.10.1.7.1.4.1.1.11 | ColumnefmCuRegenClearCounts | read-write | current | This leaf is used to clear SHDSL Regenerator Status counters. When the value is set to clearCounts (2) the stats are cleared for this SHDSL port, regenerator n… |
| 1.3.6.1.4.1.5504.10.1.7.2 | NodeefmCuConformance | |||
| 1.3.6.1.4.1.5504.10.1.7.2.1 | NodeefmCuGroups | |||
| 1.3.6.1.4.1.5504.10.1.7.2.1.1 | GroupefmCuBasicGroup | current | A collection of objects required for all of EFMCu ports. | |
| 1.3.6.1.4.1.5504.10.1.7.2.1.2 | GroupefmCuPAFGroup | current | A collection of objects required for optional PME Aggregation Function (PAF) and PAF discovery in EFMCu ports. | |
| 1.3.6.1.4.1.5504.10.1.7.2.1.3 | GroupifStackCapabilityGroup | current | A collection of objects providing information on the stacking capability of MIB-II interfaces. | |
| 1.3.6.1.4.1.5504.10.1.7.2.1.4 | GroupefmCuPAFErrorsGroup | current | A collection of objects supporting optional error counters of PAF on EFMCu ports. | |
| 1.3.6.1.4.1.5504.10.1.7.2.1.5 | GroupefmCuPmeGroup | current | A collection of objects providing information about a 2BASE-TL/10PASS-TS PME. | |
| 1.3.6.1.4.1.5504.10.1.7.2.1.6 | GroupefmCuAlarmConfGroup | current | A collection of objects required for configuration of alarm thresholds and notifications in EFMCu ports. | |
| 1.3.6.1.4.1.5504.10.1.7.2.1.7 | GroupefmCuNotificationGroup | current | This group supports notifications of significant conditions associated with EFMCu ports. | |
| 1.3.6.1.4.1.5504.10.1.7.2.1.8 | GroupefmCuPme2BProfileGroup | current | A collection of objects that constitute a configuration profile for configuration of 2BASE-TL ports. | |
| 1.3.6.1.4.1.5504.10.1.7.2.1.9 | GroupefmCuPme10PProfileGroup | current | A collection of objects that constitute a configuration profile for configuration of 10PASS-TS ports. | |
| 1.3.6.1.4.1.5504.10.1.7.2.1.10 | GroupefmCuPme10PStatusGroup | current | A collection of objects providing status information specific to 10PASS-TS PMEs. | |
| 1.3.6.1.4.1.5504.10.1.7.2.2 | NodeefmCuCompliances | |||
| 1.3.6.1.4.1.5504.10.1.7.2.2.1 | ComplianceefmCuCompliance | read-only | current | The compliance statement for 2BASE-TL/10PASS-TS interfaces. Compliance with the following external compliance statements is prerequisite: MIB Module Compliance… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| ProfileIndex | Unsigned32 (1..255) | current | A unique value, greater than zero, for each PME configuration profile in the managed EFMCu port. It is recommended that values are assigned contiguously starting from 1. The value for each profile must remain constant a… |
| ProfileIndexList | OCTET STRING (SIZE(1..6)) | current | Represents a list of up to 6 ProfileIndex's. The ProfileIndex textual convention defines a greater than zero value used to identify a PME profile in the managed EFMCu port. The value of this object is a concatenation of… |
| ProfileIndexOrZero | Unsigned32 (0..255) | current | This textual convention is an extension of the ProfileIndex convention. The latter defines a greater than zero value used to identify a PME profile in the managed EFMCu port. This extension permits the additional value … |
| TruthValueOrUnknown | INTEGER { unknown(0), true(1), false(2) } | current | This textual convention is an extension of the TruthValue convention. The latter defines a boolean value with possible values of true(1) and false(2). This extension permits the additional value of unknown(0), which can… |