EKINOPS-PM1001PC-MIB
612 objects
MIB for managing Ekinops modules with PM1001PC software
Imported Objects
| EKINOPS-MIB | EkiApiState EkiMeasureType EkiMode ekinops EkiOnOff EkiProtocol EkiState EkiSynchroMode |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.20044.12 | Identitymodulepm1001pc | MIB for managing Ekinops modules with PM1001PC software | ||
| 1.3.6.1.4.1.20044.12.2 | Nodepm1001pcalarms | |||
| 1.3.6.1.4.1.20044.12.2.1 | Nodepm1001pcAlmOther | |||
| 1.3.6.1.4.1.20044.12.2.1.1 | Nodepm1001pcAlmOtherNurg | |||
| 1.3.6.1.4.1.20044.12.2.1.1.2 | Nodepm1001pcAlmsynthAlm2 | |||
| 1.3.6.1.4.1.20044.12.2.1.1.2.1 | Scalarpm1001pcAlmConfTableSave | read-only | current | PM Configuration Save :This OID is at 1 during the saving of a new configuration table in the module Flash memory. <Condtype> CONF_TABLE_SAVE <Probcause> other… |
| 1.3.6.1.4.1.20044.12.2.1.1.2.2 | Scalarpm1001pcAlmInvUpload | read-only | current | Inventory Upload :This OID is at 1 during the uploading of PM inventory information. <Condtype> INV_UPLOAD <Probcause> other (1) <Alarmtype> other (1) <Polarit… |
| 1.3.6.1.4.1.20044.12.2.1.1.2.3 | Scalarpm1001pcAlmConfTableLoad | read-only | current | PM Configuration Load :This OID is at 1 during the loading of configuration tables in the modules RAM. <Condtype> CONF_TABLE_LOAD <Probcause> other (1) <Alarmt… |
| 1.3.6.1.4.1.20044.12.2.1.1.2.4 | Scalarpm1001pcAlmCorrelatOff | read-only | current | Not Used :This OID, when set, indicates that alarm correlation is not being performed. <Condtype> CORRELAT_OFF <Probcause> other (1) <Alarmtype> other (1) <Pol… |
| 1.3.6.1.4.1.20044.12.2.1.1.2.5 | Scalarpm1001pcAlmMaintenanceOn | read-only | current | Maintenance Mode :This OID indicates that the PM is in maintenance mode. <Help> This alarm indicates that the maintenance mode is enabled on the PM <Condtype> … |
| 1.3.6.1.4.1.20044.12.2.1.2 | Nodepm1001pcAlmOtherUrg | |||
| 1.3.6.1.4.1.20044.12.2.1.2.194 | Nodepm1001pcAlmmodInitFailLevel2 | |||
| 1.3.6.1.4.1.20044.12.2.1.2.194.1 | Scalarpm1001pcAlmLedFail | read-only | current | Led Fail :This OID indicates that Led register has not been correctly initalized <Help> This alarm indicates if the module LEDs are correctly initialized <Cond… |
| 1.3.6.1.4.1.20044.12.2.1.2.194.2 | Scalarpm1001pcAlmNextColdBootForced | read-only | current | Next Cold Boot Forced :This OID indicates that the next Reset will be forced Cold <Help> This alarm indicates that the next reset of the module will be forced … |
| 1.3.6.1.4.1.20044.12.2.1.2.194.3 | Scalarpm1001pcAlmBootUndone | read-only | current | Boot Undone :This OID indicates that the boot has not been correctly achieved <Help> This alarm indicates if the module has correctly boot <Condtype> BOOT_UNDO… |
| 1.3.6.1.4.1.20044.12.2.1.2.194.4 | Scalarpm1001pcAlmResetHwInitFail | read-only | current | Reset HW Init Fail :This OID indicates that the HW intialization has caused unknown intial conditions <Help> This alarm indicates if the HW has been correctly … |
| 1.3.6.1.4.1.20044.12.2.1.2.194.5 | Scalarpm1001pcAlmSwInitFail | read-only | current | SW Init Fail :This OID indicates that the SW intialization has caused unknown intial conditions <Help> This alarm indicates if the SW module is correctly initi… |
| 1.3.6.1.4.1.20044.12.2.1.2.195 | Nodepm1001pcAlmmodInitFailLevel3 | |||
| 1.3.6.1.4.1.20044.12.2.1.2.195.1 | Scalarpm1001pcAlmGwIdentFail | read-only | current | GW Ident Fail :This OID indicates that GW identification has not been read <Help> This alarm indicates if the GW has been correctly identified <Condtype> GW_ID… |
| 1.3.6.1.4.1.20044.12.2.1.2.195.2 | Scalarpm1001pcAlmObmTypeReadFail | read-only | current | OBM Type Read Fail :This OID indicates that OBM type has not been recognized <Help> This alarm indicates if the OBM board has been correctly identified <Condty… |
| 1.3.6.1.4.1.20044.12.2.1.2.195.3 | Scalarpm1001pcAlmInitModuleFail | read-only | current | Init Module Fail :This OID indicates that the Module has not been correctly initialized <Help> This alarm indicates if the SW module is correctly initialized <… |
| 1.3.6.1.4.1.20044.12.2.1.2.195.5 | Scalarpm1001pcAlmXfp1InitFail | read-only | current | XFP1 Init Fail :This OID indicates that the XFP has not been correctly initialized <Help> This alarm indicates if the line transceiver 1 is correctly initializ… |
| 1.3.6.1.4.1.20044.12.2.1.2.195.6 | Scalarpm1001pcAlmXfp2InitFail | read-only | current | XFP2 Init Fail :This OID indicates that the XFP has not been correctly initialized <Help> This alarm indicates if the line transceiver 2 is correctly initializ… |
| 1.3.6.1.4.1.20044.12.2.1.2.195.7 | Scalarpm1001pcAlmLineInitFail | read-only | current | Line Init Fail :This OID indicates that the Line registersvsubset has not been correctly initialized <Help> This alarm indicates if the line port is correctly … |
| 1.3.6.1.4.1.20044.12.2.1.2.195.9 | Scalarpm1001pcAlmClientInitFail | read-only | current | Client Init Fail :This OID indicates that Client 1 registers subset has not been correctly initialized <Help> This alarm indicates if the client port is correc… |
| 1.3.6.1.4.1.20044.12.2.1.3 | Nodepm1001pcAlmOtherCrit | |||
| 1.3.6.1.4.1.20044.12.2.1.3.0 | Nodepm1001pcAlmsynthAlm0 | |||
| 1.3.6.1.4.1.20044.12.2.1.3.0.9 | Scalarpm1001pcAlmModGlobFail | read-only | current | Module Failure :This OID is set on detection of a failure originating from the PM <Condtype> MOD_GLOB_FAIL <Probcause> equipmentMalfunction (16) <Alarmtype> sy… |
| 1.3.6.1.4.1.20044.12.2.1.3.0.15 | Scalarpm1001pcAlmDefFuseA | read-only | current | Fuse A Fail :This OID indicates that the fuse of the power input A is in fail condition <Help> Status of the Fuse A <Condtype> DEF_FUSE_A <Probcause> powerProb… |
| 1.3.6.1.4.1.20044.12.2.1.3.0.16 | Scalarpm1001pcAlmDefFuseB | read-only | current | Fuse B Fail :This OID indicates that the fuse of the power input B is in fail condition <Help> Status of the Fuse B <Condtype> DEF_FUSE_B <Probcause> powerProb… |
| 1.3.6.1.4.1.20044.12.2.2 | Nodepm1001pcAlmClient | |||
| 1.3.6.1.4.1.20044.12.2.2.1 | Nodepm1001pcAlmClientNurg | |||
| 1.3.6.1.4.1.20044.12.2.2.1.48 | Nodepm1001pcAlmclientXfpWarnings | |||
| 1.3.6.1.4.1.20044.12.2.2.1.48.1 | Scalarpm1001pcAlmClientTxPowerLowWarning | read-only | current | Client Optical Tx Pwr Low Warning :Warning indicating that the XFP/OTX transmitter transmitter output power is lower than the threshold value written in the XF… |
| 1.3.6.1.4.1.20044.12.2.2.1.48.2 | Scalarpm1001pcAlmClientTxPowerHighWarning | read-only | current | Client Optical Tx Pwr High Warning :Warning indicating that the XFP/OTX transmitter transmitter output power is higher than the threshold value written in the … |
| 1.3.6.1.4.1.20044.12.2.2.1.48.3 | Scalarpm1001pcAlmClientTxBiasLowWarning | read-only | current | Client Transceiver Bias Low Warning :Warning indicating that the XFP/OTX transmitter laser bias current is lower than the threshold value written in the XFP/OT… |
| 1.3.6.1.4.1.20044.12.2.2.1.48.4 | Scalarpm1001pcAlmClientTxBiasHighWarning | read-only | current | Client Transceiver Bias High Warning :Warning indicating that the XFP/OTX transmitter laser bias current is higher than the threshold value written in the XFP … |
| 1.3.6.1.4.1.20044.12.2.2.1.48.7 | Scalarpm1001pcAlmClientTempLowWarning | read-only | current | Client Transceiver Temp Low Warning :Warning indicating that the XFP/OTX temperature is lower than the threshold value written in the XFP/OTX EEPROM <Condtype>… |
| 1.3.6.1.4.1.20044.12.2.2.1.48.8 | Scalarpm1001pcAlmClientTempHighWarning | read-only | current | Client Transceiver Temp High Warning :Warning indicating that the XFP/OTX temperature is higher than the threshold value written in the XFP EEPROM <Condtype> C… |
| 1.3.6.1.4.1.20044.12.2.2.1.48.15 | Scalarpm1001pcAlmClientRxPowerLowWarning | read-only | current | Client Optical Rx Pwr Low Warning :Warning indicating that the XFP received optical power is lower than the threshold value written in the XFP EEPROM <Condtype… |
| 1.3.6.1.4.1.20044.12.2.2.1.48.16 | Scalarpm1001pcAlmClientRxPowerHighWarning | read-only | current | Client Optical Rx Pwr High Warning :Warning indicating that the XFP received optical power is higher than the threshold value written in the XFP EEPROM <Condty… |
| 1.3.6.1.4.1.20044.12.2.2.2 | Nodepm1001pcAlmClientUrg | |||
| 1.3.6.1.4.1.20044.12.2.2.2.32 | Nodepm1001pcAlmclientXfpAlarm1 | |||
| 1.3.6.1.4.1.20044.12.2.2.2.32.1 | Scalarpm1001pcAlmClientTxPowerLowAlarm | read-only | current | Client Optical Tx Power Low :Alarm indicating that the XFP/OTX transmitter transmitter output power is lower than the threshold value written in the XFP/OTX EE… |
| 1.3.6.1.4.1.20044.12.2.2.2.32.2 | Scalarpm1001pcAlmClientTxPowerHighAlarm | read-only | current | Client Optical Tx Power High :Alarm indicating that the XFP/OTX transmitter transmitter output power is higher than the threshold value written in the XFP EEPR… |
| 1.3.6.1.4.1.20044.12.2.2.2.32.3 | Scalarpm1001pcAlmClientTxBiasLowAlarm | read-only | current | Client Transceiver Bias Low :Alarm indicating that the XFP/OTX transmitter laser bias current is lower than the threshold value written in the XFP/OTX EEPROM <… |
| 1.3.6.1.4.1.20044.12.2.2.2.32.4 | Scalarpm1001pcAlmClientTxBiasHighAlarm | read-only | current | Client Transceiver Bias High :Alarm indicating that the XFP/OTX transmitter laser bias current is higher than the threshold value written in the XFP EEPROM <Co… |
| 1.3.6.1.4.1.20044.12.2.2.2.32.7 | Scalarpm1001pcAlmClientTempLowAlarm | read-only | current | Client Transceiver Temp Low :Alarm indicating that the XFP/OTX temperature is lower than the threshold value written in the XFP/OTX EEPROM <Condtype> CLIENT_TE… |
| 1.3.6.1.4.1.20044.12.2.2.2.32.8 | Scalarpm1001pcAlmClientTempHighAlarm | read-only | current | Client Transceiver Temp High :Alarm indicating that the XFP/OTX temperature is higher than the threshold value written in the XFP EEPROM <Condtype> CLIENT_TEMP… |
| 1.3.6.1.4.1.20044.12.2.2.2.32.15 | Scalarpm1001pcAlmClientRxPowerLowAlarm | read-only | current | Client Optical Rx Power Low :Alarm indicating that the XFP received optical power is lower than the threshold value written in the XFP EEPROM <Condtype> CLIENT… |
| 1.3.6.1.4.1.20044.12.2.2.2.32.16 | Scalarpm1001pcAlmClientRxPowerHighAlarm | read-only | current | Client Optical Rx Power High :Alarm indicating that the XFP received optical power is higher than the threshold value written in the XFP EEPROM <Condtype> CLIE… |
| 1.3.6.1.4.1.20044.12.2.2.2.64 | Nodepm1001pcAlmclientXfpSupplyAlarm | |||
| 1.3.6.1.4.1.20044.12.2.2.2.64.1 | Scalarpm1001pcAlmClientVee5LowAlarm | read-only | current | VEE5 Power Supply Low Alarm :Alarm indicating the XFP/OTX VEE5 power supply is lower than the threshold written in the EEPROM <Condtype> CLIENT_VEE5_LOW_ALARM … |
| 1.3.6.1.4.1.20044.12.2.2.2.64.2 | Scalarpm1001pcAlmClientVee5HighAlarm | read-only | current | VEE5 Power Supply High Alarm :Alarm indicating the XFP/OTX VEE5 power supply is higher than the threshold written in the EEPROM <Condtype> CLIENT_VEE5_HIGH_ALA… |
| 1.3.6.1.4.1.20044.12.2.2.2.64.3 | Scalarpm1001pcAlmClientVcc2LowAlarm | read-only | current | VCC2 Power Supply Low Alarm :Alarm indicating the XFP/OTX VCC2 power supply is lower than the threshold written in the EEPROM <Condtype> CLIENT_VCC2_LOW_ALARM … |
| 1.3.6.1.4.1.20044.12.2.2.2.64.4 | Scalarpm1001pcAlmClientVcc2HighAlarm | read-only | current | VCC2 Power Supply High Alarm :Alarm indicating the XFP/OTX VCC2 power supply is higher than the threshold written in the EEPROM <Condtype> CLIENT_VCC2_HIGH_ALA… |
| 1.3.6.1.4.1.20044.12.2.2.2.64.5 | Scalarpm1001pcAlmClientVcc3LowAlarm | read-only | current | VCC3 Power Supply Low Alarm :Alarm indicating the XFP/OTX VCC3 power supply is lower than the threshold written in the EEPROM <Condtype> CLIENT_VCC3_LOW_ALARM … |
| 1.3.6.1.4.1.20044.12.2.2.2.64.6 | Scalarpm1001pcAlmClientVcc3HighAlarm | read-only | current | VCC3 Power Supply High Alarm :Alarm indicating the XFP/OTX VCC3 power supply is higher than the threshold written in the EEPROM <Condtype> CLIENT_VCC3_HIGH_ALA… |
| 1.3.6.1.4.1.20044.12.2.2.2.64.7 | Scalarpm1001pcAlmClientVcc5LowAlarm | read-only | current | VCC5 Power Supply Low Alarm :Alarm indicating the XFP/OTX VCC5 power supply is lower than the threshold written in the EEPROM <Condtype> CLIENT_VCC5_LOW_ALARM … |
| 1.3.6.1.4.1.20044.12.2.2.2.64.8 | Scalarpm1001pcAlmClientVcc5HighAlarm | read-only | current | VCC5 Power Supply High Alarm :Alarm indicating the XFP/OTX VCC5 power supply is higher than the threshold written in the EEPROM <Condtype> CLIENT_VCC5_HIGH_ALA… |
| 1.3.6.1.4.1.20044.12.2.2.2.64.9 | Scalarpm1001pcAlmClientVee5LowWarning | read-only | current | VEE5 Power Supply Low Warning :Warning indicating the XFP/OTX VEE5 power supply is lower than the threshold written in the EEPROM <Condtype> CLIENT_VEE5_LOW_WA… |
| 1.3.6.1.4.1.20044.12.2.2.2.64.10 | Scalarpm1001pcAlmClientVee5HighWarning | read-only | current | VEE5 Power Supply High Warning :Warning indicating the XFP/OTX VEE5 power supply is higher than the threshold written in the EEPROM <Condtype> CLIENT_VEE5_HIGH… |
| 1.3.6.1.4.1.20044.12.2.2.2.64.11 | Scalarpm1001pcAlmClientVcc2LowWarning | read-only | current | VCC2 Power Supply Low Warning :Warning indicating the XFP/OTX VCC2 power supply is lower than the threshold written in the EEPROM <Condtype> CLIENT_VCC2_LOW_WA… |
| 1.3.6.1.4.1.20044.12.2.2.2.64.12 | Scalarpm1001pcAlmClientVcc2HighWarning | read-only | current | VCC2 Power Supply High Warning :Warning indicating the XFP/OTX VCC2 power supply is higher than the threshold written in the EEPROM <Condtype> CLIENT_VCC2_HIGH… |
| 1.3.6.1.4.1.20044.12.2.2.2.64.13 | Scalarpm1001pcAlmClientVcc3LowWarning | read-only | current | VCC3 Power Supply Low Warning :Warning indicating the XFP/OTX VCC3 power supply is lower than the threshold written in the EEPROM <Condtype> CLIENT_VCC3_LOW_WA… |
| 1.3.6.1.4.1.20044.12.2.2.2.64.14 | Scalarpm1001pcAlmClientVcc3HighWarning | read-only | current | VCC3 Power Supply High Warning :Warning indicating the XFP/OTX VCC3 power supply is higher than the threshold written in the EEPROM <Condtype> CLIENT_VCC3_HIGH… |
| 1.3.6.1.4.1.20044.12.2.2.2.64.15 | Scalarpm1001pcAlmClientVcc5LowWarning | read-only | current | VCC5 Power Supply Low Warning :Warning indicating the XFP/OTX VCC5 power supply is lower than the threshold written in the EEPROM <Condtype> CLIENT_VCC5_LOW_WA… |
| 1.3.6.1.4.1.20044.12.2.2.2.64.16 | Scalarpm1001pcAlmClientVcc5HighWarning | read-only | current | VCC5 Power Supply High Warning :Warning indicating the XFP/OTX VCC5 power supply is higher than the threshold written in the EEPROM <Condtype> CLIENT_VCC5_HIGH… |
| 1.3.6.1.4.1.20044.12.2.2.3 | Nodepm1001pcAlmClientCrit | |||
| 1.3.6.1.4.1.20044.12.2.2.3.8 | Nodepm1001pcAlmsynthAlmPort | |||
| 1.3.6.1.4.1.20044.12.2.2.3.8.1 | Scalarpm1001pcAlmClientXfpAbsent | read-only | current | Client Optical Module Absent :This OID indicates that the XFP module is not present in the client port. <Help> This alarm indicates if the client transceiver i… |
| 1.3.6.1.4.1.20044.12.2.2.3.8.2 | Scalarpm1001pcAlmClientDdmAbsent | read-only | current | Client Optical Module Ready :This OID indicates that the client optical interface (XFP or OTX) is not operational. <Help> This status indicates if the client t… |
| 1.3.6.1.4.1.20044.12.2.2.3.8.4 | Scalarpm1001pcAlmClientHwFail | read-only | current | Client HW Fail :This OID indicates a failure on client port, most probably caused by a HW issue. <Condtype> CLIENT_HW_FAIL <Probcause> equipmentMalfunction (16… |
| 1.3.6.1.4.1.20044.12.2.2.3.8.5 | Scalarpm1001pcAlmClientDwLsd | read-only | current | Client Optical Laser Shutdown :This OID indicates the Client XFP transmitter output is ON. <Help> This status indicates if the client transceiver laser is ON o… |
| 1.3.6.1.4.1.20044.12.2.2.3.8.6 | Scalarpm1001pcAlmClientLocalOos | read-only | current | Local Client Port In Service :This OID indicates that the local Client port is In Service (1) or Out of Service (2) <Help> This status indicates if the local c… |
| 1.3.6.1.4.1.20044.12.2.2.3.8.8 | Scalarpm1001pcAlmClientDwCais | read-only | current | Client AIS Inserted :This OID indicates a CAIS has been inserted on the output client port. <Help> This status indicates if a Client Alarm Indication Signal is… |
| 1.3.6.1.4.1.20044.12.2.2.3.8.9 | Scalarpm1001pcAlmClientXfpDdmWarning | read-only | current | Warning On Client XFP DDM :This OID indicates a warning is being received from the Client XFP DDM <Help> This alarm indicates if a DDM Warning has been detecte… |
| 1.3.6.1.4.1.20044.12.2.2.3.8.10 | Scalarpm1001pcAlmClientXfpDdmAlm | read-only | current | Alarm On Client XFP DDM :This OID indicates an alarm is being received from the Client XFP DDM <Help> This alarm indicates if a DDM Alarm has been detected on … |
| 1.3.6.1.4.1.20044.12.2.2.3.8.12 | Scalarpm1001pcAlmClientFail | read-only | current | Client Access Fail :This OID indicates a failure on the Client port <Condtype> CLIENT_FAIL <Probcause> equipmentMalfunction (16) <Alarmtype> synthesisAlarm (12… |
| 1.3.6.1.4.1.20044.12.2.2.3.8.16 | Scalarpm1001pcAlmClientUpCsf | read-only | current | Client Signal Fail Inserted :This OID indicates a CSF has been inserted in the upstream client port. <Help> This status indicates if a Client Signal Fail is cu… |
| 1.3.6.1.4.1.20044.12.2.2.3.16 | Nodepm1001pcAlmclientAccessioAlm | |||
| 1.3.6.1.4.1.20044.12.2.2.3.16.1 | Scalarpm1001pcAlmClientDwLasFail | read-only | current | Client XFP Tx Failed :This OID indicates that the transmitter fails for the XFP plugged into the client port (this alarm reports the transmitter failure alarm … |
| 1.3.6.1.4.1.20044.12.2.2.3.16.4 | Scalarpm1001pcAlmClientUpLos | read-only | current | Client Input Loss Of Signal :This OID indicates that no signal is present on the XFP of the client port <Help> This alarm indicates if an optical signal is det… |
| 1.3.6.1.4.1.20044.12.2.2.3.40 | Nodepm1001pcAlmclientXfpAlarm2 | |||
| 1.3.6.1.4.1.20044.12.2.2.3.40.2 | Scalarpm1001pcAlmClientModNr | read-only | current | Client Optical Module Not Ready :This OID indicates that the module is unable to determine correct data. <Help> This alarm indicates if the Client transceiver … |
| 1.3.6.1.4.1.20044.12.2.2.3.40.3 | Scalarpm1001pcAlmClientRxCdrNotLocked1 | read-only | current | Client Optical Rx CDR Unlocked :This OID indicates that a loss of lock on the receiving side CDR has been detected <Help> This alarm indicates if the Rx CDR is… |
| 1.3.6.1.4.1.20044.12.2.2.3.40.5 | Scalarpm1001pcAlmClientRxNr | read-only | current | Client Optical Rx Not Ready :This OID indicates that a condition has arisen leading to invalid data on the receiving side. <Help> This alarm indicates if the R… |
| 1.3.6.1.4.1.20044.12.2.2.3.40.6 | Scalarpm1001pcAlmClientTxCdrNotLocked1 | read-only | current | Client Optical Tx CDR Unlocked :This OID indicates a loss of lock on the transmitting side CDR has been detected. <Help> This alarm indicates if the Tx CDR is … |
| 1.3.6.1.4.1.20044.12.2.2.3.40.7 | Scalarpm1001pcAlmClientTxFault | read-only | current | Client Optical Tx Failure :This OID indicates a fault condition on the laser detected by the safety syste <Help> This alarm indicates if the laser of the Clien… |
| 1.3.6.1.4.1.20044.12.2.2.3.40.8 | Scalarpm1001pcAlmClientTxNr | read-only | current | Client Optical Tx Not Ready :This OID indicates a condition has arisen leading to invalid data on the transmitting side <Help> This alarm indicates if the Tx p… |
| 1.3.6.1.4.1.20044.12.2.2.3.40.14 | Scalarpm1001pcAlmClientWavelengthUnlocked | read-only | current | Client Optical Tx Wavelength Unlocked :This OID indicates that the wavelength error is exceeding the manufacturer tolerance <Help> This alarm indicates if the … |
| 1.3.6.1.4.1.20044.12.2.2.3.40.15 | Scalarpm1001pcAlmClientTecFault | read-only | current | Client Optical Tx Temp Regul. Failed :This OID indicates a failure on the TEC module <Help> This alarm indicates if the TEC of the Client transceiver is in fai… |
| 1.3.6.1.4.1.20044.12.2.2.3.40.16 | Scalarpm1001pcAlmClientApdSupplyFault | read-only | current | Client Rx Photodiode Power Failed :This OID indicates a failure on the APD power supply <Help> This alarm indicates if the APD power supply is in fail conditio… |
| 1.3.6.1.4.1.20044.12.2.2.3.72 | Nodepm1001pcAlmclientMapperDeAlm | |||
| 1.3.6.1.4.1.20044.12.2.2.3.72.1 | Scalarpm1001pcAlmClientUpAccOos | read-only | current | Client Loss Of Synchronisation :This OID indicates the upstream client input port is in Loss of Synchronization <Help> This alarms indicates if the input clien… |
| 1.3.6.1.4.1.20044.12.2.2.3.72.10 | Scalarpm1001pcAlmClientUpBufferOvl | read-only | current | Client Upstream Buffer Overload :This OID indicates that the rate adaptation buffer for client port is in overload. <Condtype> CLIENT_UP_BUFFER_OVL <Probcause>… |
| 1.3.6.1.4.1.20044.12.2.2.3.72.11 | Scalarpm1001pcAlmClientDwCsfDet | read-only | current | Client Signal Fail Detected :This OID indicates that a CSF has been detected on client port in the downstream direction <Help> This alarm indicates if a Client… |
| 1.3.6.1.4.1.20044.12.2.2.3.72.14 | Scalarpm1001pcAlmClientDwBufferOvl | read-only | current | Client Downstream Buffer Overload :This OID indicates that the de-mapper buffer for client port is in overload. <Condtype> CLIENT_DW_BUFFER_OVL <Probcause> equ… |
| 1.3.6.1.4.1.20044.12.2.3 | Nodepm1001pcAlmLine | |||
| 1.3.6.1.4.1.20044.12.2.3.1 | Nodepm1001pcAlmLineNurg | |||
| 1.3.6.1.4.1.20044.12.2.3.1.209 | Nodepm1001pcAlmlineXfpWarnings | |||
| 1.3.6.1.4.1.20044.12.2.3.1.209.1 | Scalarpm1001pcAlmLineTxPowerLowWarning | read-only | current | Line Optical Tx Power Low Warning :Warning indicating that the XFP/OTX transmitter transmitter output power is lower than the threshold value written in the XF… |
| 1.3.6.1.4.1.20044.12.2.3.1.209.2 | Scalarpm1001pcAlmLineTxPowerHighWarning | read-only | current | Line Optical Tx Power High Warning :Warning indicating that the XFP/OTX transmitter transmitter output power is higher than the threshold value written in the … |
| 1.3.6.1.4.1.20044.12.2.3.1.209.3 | Scalarpm1001pcAlmLineTxBiasLowWarning | read-only | current | Line Transceiver Bias Low Warning :Warning indicating that the XFP/OTX transmitter laser bias current is lower than the threshold value written in the XFP/OTX … |
| 1.3.6.1.4.1.20044.12.2.3.1.209.4 | Scalarpm1001pcAlmLineTxBiasHighWarning | read-only | current | Line Transceiver Bias High Warning :Warning indicating that the XFP/OTX transmitter laser bias current is higher than the threshold value written in the XFP EE… |
| 1.3.6.1.4.1.20044.12.2.3.1.209.7 | Scalarpm1001pcAlmLineTempLowWarning | read-only | current | Line Transceiver Temp Low Warning :Warning indicating that the XFP/OTX temperature is lower than the threshold value written in the XFP/OTX EEPROM <Condtype> L… |
| 1.3.6.1.4.1.20044.12.2.3.1.209.8 | Scalarpm1001pcAlmLineTempHighWarning | read-only | current | Line Transceiver Temp High Warning :Warning indicating that the XFP/OTX temperature is higher than the threshold value written in the XFP EEPROM <Condtype> LIN… |
| 1.3.6.1.4.1.20044.12.2.3.1.209.15 | Scalarpm1001pcAlmLineRxPowerLowWarning | read-only | current | Line Optical Rx Power Low Warning :Warning indicating that the XFP received optical power is lower than the threshold value written in the XFP EEPROM <Condtype… |
| 1.3.6.1.4.1.20044.12.2.3.1.209.16 | Scalarpm1001pcAlmLineRxPowerHighWarning | read-only | current | Line Optical Rx Power High Warning :Warning indicating that the XFP received optical power is higher than the threshold value written in the XFP EEPROM <Condty… |
| 1.3.6.1.4.1.20044.12.2.3.2 | Nodepm1001pcAlmLineUrg | |||
| 1.3.6.1.4.1.20044.12.2.3.2.129 | Nodepm1001pcAlmdfrmBer | |||
| 1.3.6.1.4.1.20044.12.2.3.2.129.1 | Scalarpm1001pcAlmLineSignalDegrade | read-only | current | Custom Line Signal Degrade :This OID indicates that the line input signal is DEGRADE. The assertion hysteresis can customized by the host <Condtype> LINE_SIGNA… |
| 1.3.6.1.4.1.20044.12.2.3.2.129.2 | Scalarpm1001pcAlmLineSignalFail | read-only | current | Custom Line Signal Fail :This OID indicates that the line input signal is FAIL. The assertion hysteresis can be customized by the host <Condtype> LINE_SIGNAL_F… |
| 1.3.6.1.4.1.20044.12.2.3.2.129.5 | Scalarpm1001pcAlmLineDegrade | read-only | current | Fixed Line Signal Degrade :This OID indicates that the line input signal is DEGRADE. The assetion hysteresis is fixed to 10-8 (assertion) and 10-9 (de-assertio… |
| 1.3.6.1.4.1.20044.12.2.3.2.208 | Nodepm1001pcAlmlineXfpAlarm1 | |||
| 1.3.6.1.4.1.20044.12.2.3.2.208.1 | Scalarpm1001pcAlmLineTxPowerLowAlarm | read-only | current | Line Optical Tx Power Low Alarm :Alarm indicating that the XFP/OTX transmitter transmitter output power is lower than the threshold value written in the XFP/OT… |
| 1.3.6.1.4.1.20044.12.2.3.2.208.2 | Scalarpm1001pcAlmLineTxPowerHighAlarm | read-only | current | Line Optical Tx Power High Alarm :Alarm indicating that the XFP/OTX transmitter transmitter output power is higher than the threshold value written in the XFP … |
| 1.3.6.1.4.1.20044.12.2.3.2.208.3 | Scalarpm1001pcAlmLineTxBiasLowAlarm | read-only | current | Line Transceiver Bias Low Alarm :Alarm indicating that the XFP/OTX transmitter laser bias current is lower than the threshold value written in the XFP/OTX EEPR… |
| 1.3.6.1.4.1.20044.12.2.3.2.208.4 | Scalarpm1001pcAlmLineTxBiasHighAlarm | read-only | current | Line Transceiver Bias High Alarm :Alarm indicating that the XFP/OTX transmitter laser bias current is higher than the threshold value written in the XFP EEPROM… |
| 1.3.6.1.4.1.20044.12.2.3.2.208.7 | Scalarpm1001pcAlmLineTempLowAlarm | read-only | current | Line Transceiver Temp Low Alarm :Alarm indicating that the XFP/OTX temperature is lower than the threshold value written in the XFP/OTX EEPROM <Condtype> LINE_… |
| 1.3.6.1.4.1.20044.12.2.3.2.208.8 | Scalarpm1001pcAlmLineTempHighAlarm | read-only | current | Line Transceiver Temp High Alarm :Alarm indicating that the XFP/OTX temperature is higher than the threshold value written in the XFP EEPROM <Condtype> LINE_TE… |
| 1.3.6.1.4.1.20044.12.2.3.2.208.15 | Scalarpm1001pcAlmLineRxPowerLowAlarm | read-only | current | Line Optical Rx Power Low Alarm :Alarm indicating that the XFP received optical power is lower than the threshold value written in the XFP EEPROM <Condtype> LI… |
| 1.3.6.1.4.1.20044.12.2.3.2.208.16 | Scalarpm1001pcAlmLineRxPowerHighAlarm | read-only | current | Line Optical Rx Power High Alarm :Alarm indicating that the XFP received optical power is higher than the threshold value written in the XFP EEPROM <Condtype> … |
| 1.3.6.1.4.1.20044.12.2.3.2.212 | Nodepm1001pcAlmlineXfpSupplyAlarm | |||
| 1.3.6.1.4.1.20044.12.2.3.2.212.1 | Scalarpm1001pcAlmLineVee5LowAlarm | read-only | current | VEE5 Power Supply Low Alarm :Alarm indicating the XFP/OTX VEE5 power supply is lower than the threshold written in the EEPROM <Condtype> LINE_VEE5_LOW_ALARM <P… |
| 1.3.6.1.4.1.20044.12.2.3.2.212.2 | Scalarpm1001pcAlmLineVee5HighAlarm | read-only | current | VEE5 Power Supply High Alarm :Alarm indicating the XFP/OTX VEE5 power supply is higher than the threshold written in the EEPROM <Condtype> LINE_VEE5_HIGH_ALARM… |
| 1.3.6.1.4.1.20044.12.2.3.2.212.3 | Scalarpm1001pcAlmLineVcc2LowAlarm | read-only | current | VCC2 Power Supply Low Alarm :Alarm indicating the XFP/OTX VCC2 power supply is lower than the threshold written in the EEPROM <Condtype> LINE_VCC2_LOW_ALARM <P… |
| 1.3.6.1.4.1.20044.12.2.3.2.212.4 | Scalarpm1001pcAlmLineVcc2HighAlarm | read-only | current | VCC2 Power Supply High Alarm :Alarm indicating the XFP/OTX VCC2 power supply is higher than the threshold written in the EEPROM <Condtype> LINE_VCC2_HIGH_ALARM… |
| 1.3.6.1.4.1.20044.12.2.3.2.212.5 | Scalarpm1001pcAlmLineVcc3LowAlarm | read-only | current | VCC3 Power Supply Low Alarm :Alarm indicating the XFP/OTX VCC3 power supply is lower than the threshold written in the EEPROM <Condtype> LINE_VCC3_LOW_ALARM <P… |
| 1.3.6.1.4.1.20044.12.2.3.2.212.6 | Scalarpm1001pcAlmLineVcc3HighAlarm | read-only | current | VCC3 Power Supply High Alarm :Alarm indicating the XFP/OTX VCC3 power supply is higher than the threshold written in the EEPROM <Condtype> LINE_VCC3_HIGH_ALARM… |
| 1.3.6.1.4.1.20044.12.2.3.2.212.7 | Scalarpm1001pcAlmLineVcc5LowAlarm | read-only | current | VCC5 Power Supply Low Alarm :Alarm indicating the XFP/OTX VCC5 power supply is lower than the threshold written in the EEPROM <Condtype> LINE_VCC5_LOW_ALARM <P… |
| 1.3.6.1.4.1.20044.12.2.3.2.212.8 | Scalarpm1001pcAlmLineVcc5HighAlarm | read-only | current | VCC5 Power Supply High Alarm :Alarm indicating the XFP/OTX VCC5 power supply is higher than the threshold written in the EEPROM <Condtype> LINE_VCC5_HIGH_ALARM… |
| 1.3.6.1.4.1.20044.12.2.3.2.212.9 | Scalarpm1001pcAlmLineVee5LowLineWarning | read-only | current | VEE5 Power Supply Low Warning :Warning indicating the XFP/OTX VEE5 power supply is lower than the threshold written in the EEPROM <Condtype> LINE_VEE5_LOW_LINE… |
| 1.3.6.1.4.1.20044.12.2.3.2.212.10 | Scalarpm1001pcAlmLineVee5HighWarning | read-only | current | VEE5 Power Supply High Warning :Warning indicating the XFP/OTX VEE5 power supply is higher than the threshold written in the EEPROM <Condtype> LINE_VEE5_HIGH_W… |
| 1.3.6.1.4.1.20044.12.2.3.2.212.11 | Scalarpm1001pcAlmLineVcc2LowWarning | read-only | current | VCC2 Power Supply Low Warning :Warning indicating the XFP/OTX VCC2 power supply is lower than the threshold written in the EEPROM <Condtype> LINE_VCC2_LOW_WARN… |
| 1.3.6.1.4.1.20044.12.2.3.2.212.12 | Scalarpm1001pcAlmLineVcc2HighWarning | read-only | current | VCC2 Power Supply High Warning :Warning indicating the XFP/OTX VCC2 power supply is higher than the threshold written in the EEPROM <Condtype> LINE_VCC2_HIGH_W… |
| 1.3.6.1.4.1.20044.12.2.3.2.212.13 | Scalarpm1001pcAlmLineVcc3LowWarning | read-only | current | VCC3 Power Supply Low Warning :Warning indicating the XFP/OTX VCC3 power supply is lower than the threshold written in the EEPROM <Condtype> LINE_VCC3_LOW_WARN… |
| 1.3.6.1.4.1.20044.12.2.3.2.212.14 | Scalarpm1001pcAlmLineVcc3HighWarning | read-only | current | VCC3 Power Supply High Warning :Warning indicating the XFP/OTX VCC3 power supply is higher than the threshold written in the EEPROM <Condtype> LINE_VCC3_HIGH_W… |
| 1.3.6.1.4.1.20044.12.2.3.2.212.15 | Scalarpm1001pcAlmLineVcc5LowWarning | read-only | current | VCC5 Power Supply Low Warning :Warning indicating the XFP/OTX VCC5 power supply is lower than the threshold written in the EEPROM <Condtype> LINE_VCC5_LOW_WARN… |
| 1.3.6.1.4.1.20044.12.2.3.2.212.16 | Scalarpm1001pcAlmLineVcc5HighWarning | read-only | current | VCC5 Power Supply High Warning :Warning indicating the XFP/OTX VCC5 power supply is higher than the threshold written in the EEPROM <Condtype> LINE_VCC5_HIGH_W… |
| 1.3.6.1.4.1.20044.12.2.3.3 | Nodepm1001pcAlmLineCrit | |||
| 1.3.6.1.4.1.20044.12.2.3.3.7 | Nodepm1001pcAlmsynthAlmLine | |||
| 1.3.6.1.4.1.20044.12.2.3.3.7.1 | Scalarpm1001pcAlmLineXfpAbsent | read-only | current | Line Optical Module Absent :This OID indicates that the line optical interface (XFP or OTX) is not plugged in. <Help> This alarm indicates if the line transcei… |
| 1.3.6.1.4.1.20044.12.2.3.3.7.2 | Scalarpm1001pcAlmLineXfpInitNotCompl | read-only | current | Line Optical Module Ready :This OID indicates that the line optical interface (XFP or OTX) is not operational. <Help> This status indicates if the line transce… |
| 1.3.6.1.4.1.20044.12.2.3.3.7.4 | Scalarpm1001pcAlmLineHwFail | read-only | current | Line Port HW Failure :This OID indicates a failure on line port, most probably caused by a HW issue <Condtype> LINE_HW_FAIL <Probcause> equipmentMalfunction (1… |
| 1.3.6.1.4.1.20044.12.2.3.3.7.5 | Scalarpm1001pcAlmLineXfpTxOff | read-only | current | Line Optical Laser Shutdown :This OID indicates the line optical output power is on <Help> This status indicates if the line transceiver laser is ON or OFF <Co… |
| 1.3.6.1.4.1.20044.12.2.3.3.7.6 | Scalarpm1001pcAlmLineLocalOos | read-only | current | Line Port In Service :This OID indicates that the Line port is In Service (1) of Out or Service (2) <Help> This status indicates if the line port is in service… |
| 1.3.6.1.4.1.20044.12.2.3.3.7.8 | Scalarpm1001pcAlmLineUpRdiIns | read-only | current | MS-RDI/L-RDI Inserted On Line :This OID indicates an upstream RDI has been inserted in the outgoing 10 Gb/s signal. <Help> This status indicates if a MS-RDI/L-… |
| 1.3.6.1.4.1.20044.12.2.3.3.7.9 | Scalarpm1001pcAlmLineDdmWarning | read-only | current | Warning On Line Optical Module DDM :This OID indicates a warning is present coming out of Line optical interface DDM <Help> This alarm indicates if a DDM Warni… |
| 1.3.6.1.4.1.20044.12.2.3.3.7.10 | Scalarpm1001pcAlmLineDdmAlm | read-only | current | Alarm On Line Optical Module DDM :This OID indicates an alarm is present coming out of Line optical interface DDM <Help> This alarm indicates if a DDM Alarm ha… |
| 1.3.6.1.4.1.20044.12.2.3.3.7.12 | Scalarpm1001pcAlmLineFail | read-only | current | Line Port Failure :This OID indicates a failure on the line port <Condtype> LINE_FAIL <Probcause> equipmentMalfunction (16) <Alarmtype> synthesisAlarm (12) <Po… |
| 1.3.6.1.4.1.20044.12.2.3.3.128 | Nodepm1001pcAlmdfrmAlm | |||
| 1.3.6.1.4.1.20044.12.2.3.3.128.1 | Scalarpm1001pcAlmLineDwAisDet | read-only | current | MS-AIS/L-AIS Detected On Line Input :This OID indicates that an MS-AIS has been detected on line input signal <Help> This alarm indicates if there is a MS-AIS/… |
| 1.3.6.1.4.1.20044.12.2.3.3.128.2 | Scalarpm1001pcAlmLineDwRdiDet | read-only | current | MS-RDI/L-RDI Detected On Line Input :This OID indicates that an MS-RDI has been detected on line input signal <Help> This alarm indicates if there is a MS-RDI/… |
| 1.3.6.1.4.1.20044.12.2.3.3.128.3 | Scalarpm1001pcAlmLineDwOof | read-only | deprecated | SONET/SDH Line Out Of Frame :This OID indicates that an Out Of Frame has been detected on line input signal <Help> This alarm indicates if there is a Out of Fr… |
| 1.3.6.1.4.1.20044.12.2.3.3.128.4 | Scalarpm1001pcAlmLineDwLof | read-only | current | SONET/SDH Line Loss Of Frame :This OID indicates that a Loss Of Frame has been detected on line input signal <Help> This alarm indicates if there is a Loss of … |
| 1.3.6.1.4.1.20044.12.2.3.3.133 | Nodepm1001pcAlmlineSyncAlarms | |||
| 1.3.6.1.4.1.20044.12.2.3.3.133.12 | Scalarpm1001pcAlmLineDwLockerr | read-only | current | Downstream Clock Lock Error :This OID indicates that the deserializer input 10 Gb/s clock recovery is not locked. <Condtype> LINE_DW_LOCKERR <Probcause> receiv… |
| 1.3.6.1.4.1.20044.12.2.3.3.133.13 | Scalarpm1001pcAlmLineUpLockerr | read-only | current | Upstream Clock Lock Error :This OID indicates that the serializer output 10 Gb/s clock multiplier unit is not locked. <Condtype> LINE_UP_LOCKERR <Probcause> re… |
| 1.3.6.1.4.1.20044.12.2.3.3.133.16 | Scalarpm1001pcAlmLineDwLos | read-only | current | Line Input Loss Of Signal :This OID indicates a loss of signal on the 10 Gb/s input. <Help> This alarm indicates if an optical signal is detected on the line t… |
| 1.3.6.1.4.1.20044.12.2.3.3.211 | Nodepm1001pcAlmlineXfpAlarms2 | |||
| 1.3.6.1.4.1.20044.12.2.3.3.211.2 | Scalarpm1001pcAlmLineModNr | read-only | current | Line Optical Module Not Ready :This OID indicates that the module is unable to determine correct data. <Help> This alarm indicates if the line transceiver is r… |
| 1.3.6.1.4.1.20044.12.2.3.3.211.3 | Scalarpm1001pcAlmLineRxCdrNotLocked1 | read-only | current | Line Optical Rx CDR Unlocked :This OID indicates that a loss of lock on the receiving side CDR has been detected <Help> This alarm indicates if the Rx CDR is l… |
| 1.3.6.1.4.1.20044.12.2.3.3.211.5 | Scalarpm1001pcAlmLineRxNr | read-only | current | Line Optical Rx Not Ready :This OID indicates that a condition has arisen leading to invalid data on the receiving side. <Help> This alarm indicates if the Rx … |
| 1.3.6.1.4.1.20044.12.2.3.3.211.6 | Scalarpm1001pcAlmLineTxCdrNotLocked1 | read-only | current | Line Optical Tx CDR Unlocked :This OID indicates a loss of lock on the transmitting side CDR has been detected. <Help> This alarm indicates if the Tx CDR is lo… |
| 1.3.6.1.4.1.20044.12.2.3.3.211.7 | Scalarpm1001pcAlmLineTxFault | read-only | current | Line Optical Tx Failure :This OID indicates a fault condition on the laser detected by the safety syste <Help> This alarm indicates if the laser of the line tr… |
| 1.3.6.1.4.1.20044.12.2.3.3.211.8 | Scalarpm1001pcAlmLineTxNr | read-only | current | Line Optical Tx Not Ready :This OID indicates a condition has arisen leading to invalid data on the transmitting side <Help> This alarm indicates if the Tx par… |
| 1.3.6.1.4.1.20044.12.2.3.3.211.14 | Scalarpm1001pcAlmLineWavelengthUnlocked | read-only | current | Line Optical Tx Wavelength Unlock :This OID indicates that the wavelength error is exceeding the manufacturer tolerance <Help> This alarm indicates if the wave… |
| 1.3.6.1.4.1.20044.12.2.3.3.211.15 | Scalarpm1001pcAlmLineTecFault | read-only | current | Line Optical Tx Temp Regul. Failed :This OID indicates a failure on the TEC module <Help> This alarm indicates if the TEC of the line transceiver is in fail co… |
| 1.3.6.1.4.1.20044.12.2.3.3.211.16 | Scalarpm1001pcAlmLineApdSupplyFault | read-only | current | Line Rx Photodiode Power Failed :This OID indicates a failure on the APD power supply <Help> This alarm indicates if the APD power supply is in fail condition … |
| 1.3.6.1.4.1.20044.12.3 | Nodepm1001pcmeasures | |||
| 1.3.6.1.4.1.20044.12.3.1 | Nodepm1001pcMesrOther | |||
| 1.3.6.1.4.1.20044.12.3.1.0 | Scalarpm1001pcMesrsynth0 | read-only | deprecated | Not Used :This OID gives the unit used on AUX1 measurement of XFP#1 (Unit = ) |
| 1.3.6.1.4.1.20044.12.3.1.1 | Scalarpm1001pcMesrsynth1 | read-only | deprecated | Not Used :This OID gives the unit used on AUX2 measurement of XFP#1 (Unit = ) |
| 1.3.6.1.4.1.20044.12.3.2 | Nodepm1001pcMesrClient | |||
| 1.3.6.1.4.1.20044.12.3.2.16 | Scalarpm1001pcMesrclientModTempMeas | read-only | current | Client Optical Module Temperature :This OID gives the temperature value of the XFP plugged in port, read from the DDM (Digital Diagnostic Monitoring) (Temperat… |
| 1.3.6.1.4.1.20044.12.3.2.32 | Scalarpm1001pcMesrclientBiasCurrentMeas | read-only | current | Client Optical Module Laser Bias :This OID gives the bias value of the XFP plugged into port, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/500)… |
| 1.3.6.1.4.1.20044.12.3.2.40 | Scalarpm1001pcMesrclientTxPowerMeas | read-only | current | Client Optical Module Tx Power :This OID gives the transmit power value of the XFP plugged into port, read from the DDM (Digital Diagnostic Monitoring) (Power … |
| 1.3.6.1.4.1.20044.12.3.2.48 | Scalarpm1001pcMesrclientRxPowerMeas | read-only | current | Client Optical Module Rx Power :This OID gives the receive power value of the XFP plugged into port, read in the DDM (Digital Diagnostic Monitoring) (Power = 1… |
| 1.3.6.1.4.1.20044.12.3.3 | Nodepm1001pcMesrLine | |||
| 1.3.6.1.4.1.20044.12.3.3.208 | Scalarpm1001pcMesrlineModTempMeas | read-only | current | Line Optical Module Temperature :This OID gives the temperature of the XFP or OTX plugged in line#1, read from the DDM (Digital Diagnostic Monitoring) (Tempera… |
| 1.3.6.1.4.1.20044.12.3.3.209 | Scalarpm1001pcMesrlineReserved | read-only | deprecated | Not Used : |
| 1.3.6.1.4.1.20044.12.3.3.210 | Scalarpm1001pcMesrlineBiasCurrentMeas | read-only | current | Line Optical Module Laser Bias :This OID gives the bias value of the XFP or OTX plugged in line #1, read from the DDM (Digital Diagnostic Monitoring) (Bias = A… |
| 1.3.6.1.4.1.20044.12.3.3.211 | Scalarpm1001pcMesrlineTxPowerMeas | read-only | current | Line Optical Module Tx Power :This OID gives the transmit power value of the XFP or OTX plugged in line #1, read from the DDM (Digital Diagnostic Monitoring) (… |
| 1.3.6.1.4.1.20044.12.3.3.212 | Scalarpm1001pcMesrlineRxPowerMeas | read-only | current | Line Optical Module Rx Power :This OID gives the receive power value of the XFP or OTX plugged in line #1, read from the DDM (Digital Diagnostic Monitoring) (P… |
| 1.3.6.1.4.1.20044.12.3.3.213 | Scalarpm1001pcMesrlineAux1Meas | read-only | deprecated | Not Used :This OID gives the receive power value read in the DDM (Digital Diagnostic Monitoring) of the XFP or OTX plugged in line #1 (Unit = ?) |
| 1.3.6.1.4.1.20044.12.3.3.214 | Scalarpm1001pcMesrlineAux2Meas | read-only | deprecated | Not Used :This OID gives the receive power value read in the DDM (Digital Diagnostic Monitoring) of the XFP or OTX plugged in line #1 (Unit = ?) |
| 1.3.6.1.4.1.20044.12.4 | Nodepm1001pccounters | |||
| 1.3.6.1.4.1.20044.12.4.1 | Nodepm1001pcCntOther | |||
| 1.3.6.1.4.1.20044.12.4.2 | Nodepm1001pcCntClient | |||
| 1.3.6.1.4.1.20044.12.4.2.32 | Tablepm1001pcCntclientUpErrCntTable | not-accessible | current | List of pm1001pcCntclientUpErrCnt Article |
| 1.3.6.1.4.1.20044.12.4.2.32.1 | Rowpm1001pcCntclientUpErrCntEntry | not-accessible | current | Row definition for the pm1001pcCntclientUpErrCnt table |
| 1.3.6.1.4.1.20044.12.4.2.32.1.1 | Columnpm1001pcCntclientUpErrCntIndex | read-only | current | Index definition for the pm1001pcCntclientUpErrCnt table |
| 1.3.6.1.4.1.20044.12.4.2.32.1.2 | Columnpm1001pcCntclientUpErrCntValuePortn | read-only | current | Client Input FCS Counter :This counter is increased each time a FCS error is detected on the client input stream <Help> This counter gives the number of FCS er… |
| 1.3.6.1.4.1.20044.12.4.2.32.1.3 | Columnpm1001pcCntclientUpErrCntErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the FCS error counter value is invalid on input Port |
| 1.3.6.1.4.1.20044.12.4.2.32.1.4 | Columnpm1001pcCntclientUpErrCntOverloadPortn | read-only | current | Client Counter Overload :This OID when set indicates a FCS error counter overload on input Port |
| 1.3.6.1.4.1.20044.12.4.2.40 | Tablepm1001pcCntclientUpTimCntTable | not-accessible | current | List of pm1001pcCntclientUpTimCnt Article |
| 1.3.6.1.4.1.20044.12.4.2.40.1 | Rowpm1001pcCntclientUpTimCntEntry | not-accessible | current | Row definition for the pm1001pcCntclientUpTimCnt table |
| 1.3.6.1.4.1.20044.12.4.2.40.1.1 | Columnpm1001pcCntclientUpTimCntIndex | read-only | current | Index definition for the pm1001pcCntclientUpTimCnt table |
| 1.3.6.1.4.1.20044.12.4.2.40.1.2 | Columnpm1001pcCntclientUpTimCntValuePortn | read-only | current | Client Upstream Timer Counter :This is the timing counter dedicated to the upstream access counters. It is incremented every 125 us. |
| 1.3.6.1.4.1.20044.12.4.2.40.1.3 | Columnpm1001pcCntclientUpTimCntErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the upstream timing counter value is invalid on Port |
| 1.3.6.1.4.1.20044.12.4.2.40.1.4 | Columnpm1001pcCntclientUpTimCntOverloadPortn | read-only | current | Client Counter Overload :This OID when set indicates a upstream timing counter overload on Port |
| 1.3.6.1.4.1.20044.12.4.2.64 | Tablepm1001pcCntclientDwErrCntTable | not-accessible | current | List of pm1001pcCntclientDwErrCnt Article |
| 1.3.6.1.4.1.20044.12.4.2.64.1 | Rowpm1001pcCntclientDwErrCntEntry | not-accessible | current | Row definition for the pm1001pcCntclientDwErrCnt table |
| 1.3.6.1.4.1.20044.12.4.2.64.1.1 | Columnpm1001pcCntclientDwErrCntIndex | read-only | current | Index definition for the pm1001pcCntclientDwErrCnt table |
| 1.3.6.1.4.1.20044.12.4.2.64.1.2 | Columnpm1001pcCntclientDwErrCntValuePortn | read-only | current | Client Output FCS Counter :This counter is incremented each time a FCS error is detected on the Client output stream <Help> This counter gives the number of FC… |
| 1.3.6.1.4.1.20044.12.4.2.64.1.3 | Columnpm1001pcCntclientDwErrCntErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the FCS error counter value is invalid on output Port |
| 1.3.6.1.4.1.20044.12.4.2.64.1.4 | Columnpm1001pcCntclientDwErrCntOverloadPortn | read-only | current | Client Counter Overload :This OID when set indicates a FCS error counter overload on output Port |
| 1.3.6.1.4.1.20044.12.4.2.72 | Tablepm1001pcCntclientDwTimCntTable | not-accessible | current | List of pm1001pcCntclientDwTimCnt Article |
| 1.3.6.1.4.1.20044.12.4.2.72.1 | Rowpm1001pcCntclientDwTimCntEntry | not-accessible | current | Row definition for the pm1001pcCntclientDwTimCnt table |
| 1.3.6.1.4.1.20044.12.4.2.72.1.1 | Columnpm1001pcCntclientDwTimCntIndex | read-only | current | Index definition for the pm1001pcCntclientDwTimCnt table |
| 1.3.6.1.4.1.20044.12.4.2.72.1.2 | Columnpm1001pcCntclientDwTimCntValuePortn | read-only | current | Client Downstream Timer Counter :This is the timing counter dedicated to the downstream access counters. It is incremented every 125 us. |
| 1.3.6.1.4.1.20044.12.4.2.72.1.3 | Columnpm1001pcCntclientDwTimCntErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the downstream timer counter value is invalid on Port |
| 1.3.6.1.4.1.20044.12.4.2.72.1.4 | Columnpm1001pcCntclientDwTimCntOverloadPortn | read-only | current | Client Counter Overload :This OID when set indicates a downstream timer counter overload on Port |
| 1.3.6.1.4.1.20044.12.4.3 | Nodepm1001pcCntLine | |||
| 1.3.6.1.4.1.20044.12.4.3.152 | Tablepm1001pcCntlineDfrmErrCntTable | not-accessible | current | List of pm1001pcCntlineDfrmErrCnt Article |
| 1.3.6.1.4.1.20044.12.4.3.152.1 | Rowpm1001pcCntlineDfrmErrCntEntry | not-accessible | current | Row definition for the pm1001pcCntlineDfrmErrCnt table |
| 1.3.6.1.4.1.20044.12.4.3.152.1.1 | Columnpm1001pcCntlineDfrmErrCntIndex | read-only | current | Index definition for the pm1001pcCntlineDfrmErrCnt table |
| 1.3.6.1.4.1.20044.12.4.3.152.1.2 | Columnpm1001pcCntlineDfrmErrCntValuePortn | read-only | current | Line B1 Error Counter :This counter is incremented each time a B1 error is detected on the Deframer input stream. <Help> This counter gives the number of B1 er… |
| 1.3.6.1.4.1.20044.12.4.3.152.1.3 | Columnpm1001pcCntlineDfrmErrCntErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the B1 error counter value is invalid on Port |
| 1.3.6.1.4.1.20044.12.4.3.152.1.4 | Columnpm1001pcCntlineDfrmErrCntOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a B1 error counter overload on Port |
| 1.3.6.1.4.1.20044.12.4.3.153 | Tablepm1001pcCntlineDfrmTimCntTable | not-accessible | current | List of pm1001pcCntlineDfrmTimCnt Article |
| 1.3.6.1.4.1.20044.12.4.3.153.1 | Rowpm1001pcCntlineDfrmTimCntEntry | not-accessible | current | Row definition for the pm1001pcCntlineDfrmTimCnt table |
| 1.3.6.1.4.1.20044.12.4.3.153.1.1 | Columnpm1001pcCntlineDfrmTimCntIndex | read-only | current | Index definition for the pm1001pcCntlineDfrmTimCnt table |
| 1.3.6.1.4.1.20044.12.4.3.153.1.2 | Columnpm1001pcCntlineDfrmTimCntValuePortn | read-only | current | Line Timer Counter :This is the timing counter dedicated to the downstream deframer counters. It is incremented every 125 us. |
| 1.3.6.1.4.1.20044.12.4.3.153.1.3 | Columnpm1001pcCntlineDfrmTimCntErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port |
| 1.3.6.1.4.1.20044.12.4.3.153.1.4 | Columnpm1001pcCntlineDfrmTimCntOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port |
| 1.3.6.1.4.1.20044.12.4.3.154 | Tablepm1001pcCntlineDfrmPrimErrCntTable | not-accessible | current | List of pm1001pcCntlineDfrmPrimErrCnt Article |
| 1.3.6.1.4.1.20044.12.4.3.154.1 | Rowpm1001pcCntlineDfrmPrimErrCntEntry | not-accessible | current | Row definition for the pm1001pcCntlineDfrmPrimErrCnt table |
| 1.3.6.1.4.1.20044.12.4.3.154.1.1 | Columnpm1001pcCntlineDfrmPrimErrCntIndex | read-only | current | Index definition for the pm1001pcCntlineDfrmPrimErrCnt table |
| 1.3.6.1.4.1.20044.12.4.3.154.1.2 | Columnpm1001pcCntlineDfrmPrimErrCntValuePortn | read-only | current | FEC Corrected Errors Counter :This counter is incremented each time an error is corrected by the Forward Error Correction decoder |
| 1.3.6.1.4.1.20044.12.4.3.154.1.3 | Columnpm1001pcCntlineDfrmPrimErrCntErrorPortn | read-only | current | Line FEC Counter Error :This bit when set indicates the FEC counter value is invalid on Port |
| 1.3.6.1.4.1.20044.12.4.3.154.1.4 | Columnpm1001pcCntlineDfrmPrimErrCntOverloadPortn | read-only | current | Line FEC Counter Overload :This bit when set indicates a FEC counter overload on Port |
| 1.3.6.1.4.1.20044.12.4.3.1160 | Tablepm1001pcCntlineDfrmErrCntSTable | not-accessible | current | List of pm1001pcCntlineDfrmErrCntS Article |
| 1.3.6.1.4.1.20044.12.4.3.1160.1 | Rowpm1001pcCntlineDfrmErrCntSEntry | not-accessible | current | Row definition for the pm1001pcCntlineDfrmErrCntS table |
| 1.3.6.1.4.1.20044.12.4.3.1160.1.1 | Columnpm1001pcCntlineDfrmErrCntSIndex | read-only | current | Index definition for the pm1001pcCntlineDfrmErrCntS table |
| 1.3.6.1.4.1.20044.12.4.3.1160.1.2 | Columnpm1001pcCntlineDfrmErrCntSValuePortn | read-only | current | Line B1 error rate (/s) :This OID gives the number of B1 errors per second that are detected on the Deframer input stream. |
| 1.3.6.1.4.1.20044.12.4.3.1160.1.3 | Columnpm1001pcCntlineDfrmErrCntSErrorPortn | read-only | current | |
| 1.3.6.1.4.1.20044.12.4.3.1160.1.4 | Columnpm1001pcCntlineDfrmErrCntSOverloadPortn | read-only | current | |
| 1.3.6.1.4.1.20044.12.4.259 | Scalarpm1001pcCntCountersReset | read-write | current | Counters Reset:This OID resets and restarts all the counters |
| 1.3.6.1.4.1.20044.12.4.260 | Scalarpm1001pcCntCountersStop | read-write | current | Counters stop:This OID stops all the counters |
| 1.3.6.1.4.1.20044.12.6 | Nodepm1001pccontrolsWrite | |||
| 1.3.6.1.4.1.20044.12.6.1 | Nodepm1001pcCtrlOther | |||
| 1.3.6.1.4.1.20044.12.6.1.1 | Nodepm1001pcCtrlconfMgnt1 | |||
| 1.3.6.1.4.1.20044.12.6.1.1.1 | Scalarpm1001pcCtrlConf1Load1 | read-write | current | Load Configuration Tables Set Nb 1 :When set this OID enables loading from flash configuration1 into the PM. |
| 1.3.6.1.4.1.20044.12.6.1.1.2 | Scalarpm1001pcCtrlConf2Load1 | read-write | current | Load Configuration Tables Set Nb 2 :When set this OID enables loading from flash configuration2 into the PM. |
| 1.3.6.1.4.1.20044.12.6.1.1.10 | Scalarpm1001pcCtrlConf2Flash1 | read-write | current | Write Configuration Tables :This OID saves the current configuration of the PM as configuration2 in the flash. <Help> This control saves the customer configura… |
| 1.3.6.1.4.1.20044.12.6.1.1.14 | Scalarpm1001pcCtrlConf2Clear1 | read-write | current | Clear Configuration Tables :This OID clears the configuration tables from configuration2 in the flash. <Help> This control restores the default configuration o… |
| 1.3.6.1.4.1.20044.12.6.1.4 | Nodepm1001pcCtrlsynth4 | |||
| 1.3.6.1.4.1.20044.12.6.1.4.1 | Scalarpm1001pcCtrlCorrelatOn | read-write | current | Enable Alarm Correlation :This OID enables the alarm correlation in the PM. |
| 1.3.6.1.4.1.20044.12.6.1.4.2 | Scalarpm1001pcCtrlCorrelatOff | read-write | current | Disable Alarm Correlation :This OID disables the alarm correlation in the PM. |
| 1.3.6.1.4.1.20044.12.6.1.5 | Nodepm1001pcCtrlswMgnt | |||
| 1.3.6.1.4.1.20044.12.6.1.5.2 | Scalarpm1001pcCtrlColdReset | read-write | current | PM Cold Reset :This OID, when set, causes a cold reset of the PM. This reset is traffic affecting, and the configuration of PM is reloaded on start-up. <Help> … |
| 1.3.6.1.4.1.20044.12.6.1.5.3 | Scalarpm1001pcCtrlWarmReset | read-write | current | PM Warm Reset :This OID, when set, causes a warm reset of the PM. This reset is not traffic affecting, and the configuration of PM remains unchanged. <Help> Th… |
| 1.3.6.1.4.1.20044.12.6.1.5.5 | Scalarpm1001pcCtrlLoadSwBank1 | read-write | current | Set Software Nb 1 As Active :This OID, when set, loads the SW from bank1 into the PM. It must be followed by a reset. <Help> This controls selects the first SW… |
| 1.3.6.1.4.1.20044.12.6.1.5.6 | Scalarpm1001pcCtrlLoadSwBank2 | read-write | current | Set Software Nb 2 As Active :This OID, when set, loads the SW from bank2 into the PM. It must be followed by a reset. <Help> This controls selects the second S… |
| 1.3.6.1.4.1.20044.12.6.1.6 | Nodepm1001pcCtrlgwMgnt | |||
| 1.3.6.1.4.1.20044.12.6.1.6.1 | Scalarpm1001pcCtrlCurrentGwReset | read-write | current | Active Gateware Reset :This OID, when set, resets the active gateware. It is traffic affecting. |
| 1.3.6.1.4.1.20044.12.6.1.6.5 | Scalarpm1001pcCtrlLoadGwBank1 | read-write | current | Set Gateware Nb 1 As Active :This OID, when set, loads the GW from bank1 (Flash) into the PM. It is followed by an automatic gateware cold reset. <Help> This c… |
| 1.3.6.1.4.1.20044.12.6.1.6.6 | Scalarpm1001pcCtrlLoadGwBank2 | read-write | current | Set Gateware Nb 2 As Active :This OID, when set, loads the GW from bank2 (Flash) into the PM. It is followed by an automatic gateware cold reset. |
| 1.3.6.1.4.1.20044.12.6.1.6.7 | Scalarpm1001pcCtrlLoadGwBank3 | read-write | current | Set Gateware Nb 3 As Active :This OID, when set, loads the GW from bank3 (Flash) into the PM. It is followed by an automatic gateware cold reset. <Help> This c… |
| 1.3.6.1.4.1.20044.12.6.1.6.8 | Scalarpm1001pcCtrlLoadGwBank4 | read-write | current | Set Gateware Nb 4 As Active :This OID, when set, loads the GW from bank4 (Flash) into the PM. It is followed by an automatic gateware cold reset. |
| 1.3.6.1.4.1.20044.12.6.1.192 | Nodepm1001pcCtrlledTest | |||
| 1.3.6.1.4.1.20044.12.6.1.192.1 | Scalarpm1001pcCtrlGreenLed | read-write | current | Green Leds Test :This OID switches on all the green Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to green |
| 1.3.6.1.4.1.20044.12.6.1.192.2 | Scalarpm1001pcCtrlRedLed | read-write | current | Red Leds Test :This OID switches on all the red Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to red |
| 1.3.6.1.4.1.20044.12.6.1.192.3 | Scalarpm1001pcCtrlLedOff | read-write | current | Leds Off :This OID switches off all the Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to OFF |
| 1.3.6.1.4.1.20044.12.6.1.193 | Nodepm1001pcCtrlmoduleOosMode | |||
| 1.3.6.1.4.1.20044.12.6.1.193.1 | Scalarpm1001pcCtrlModuleOosMode | read-write | current | PM Out Of Service :This OID sets the PM Out Of Service <Help> This control defines the service state of the complete module |
| 1.3.6.1.4.1.20044.12.6.1.197 | Nodepm1001pcCtrlmaintenanceMode | |||
| 1.3.6.1.4.1.20044.12.6.1.197.1 | Scalarpm1001pcCtrlMaintenanceMode | read-write | current | Module Maintenance Mode :This OID enables the maintenance mode on the PM. <Help> This control enables the maintenance mode on the PM. |
| 1.3.6.1.4.1.20044.12.6.1.198 | Nodepm1001pcCtrldccEnable | |||
| 1.3.6.1.4.1.20044.12.6.1.198.1 | Scalarpm1001pcCtrlDccEnable | read-write | current | DCC Enable :This OID enables the DCC mode on the PM <Help> This control enables the DCC mode on the PM |
| 1.3.6.1.4.1.20044.12.6.2 | Nodepm1001pcCtrlClient | |||
| 1.3.6.1.4.1.20044.12.6.2.16 | Tablepm1001pcCtrlaccessLoopTable | not-accessible | current | List of pm1001pcCtrlaccessLoop Article |
| 1.3.6.1.4.1.20044.12.6.2.16.1 | Rowpm1001pcCtrlaccessLoopEntry | not-accessible | current | Row definition for the pm1001pcCtrlaccessLoop table |
| 1.3.6.1.4.1.20044.12.6.2.16.1.1 | Columnpm1001pcCtrlaccessLoopIndex | read-only | current | Index definition for the pm1001pcCtrlaccessLoop table |
| 1.3.6.1.4.1.20044.12.6.2.16.1.2 | Columnpm1001pcCtrlaccessLoopPortn | read-write | current | Client Facility Loopback :This OID operates a Client Facility Loopback, looping client input signal on the client output port. The loop is located on the clien… |
| 1.3.6.1.4.1.20044.12.6.2.18 | Tablepm1001pcCtrlportOosModeTable | not-accessible | current | List of pm1001pcCtrlportOosMode Article |
| 1.3.6.1.4.1.20044.12.6.2.18.1 | Rowpm1001pcCtrlportOosModeEntry | not-accessible | current | Row definition for the pm1001pcCtrlportOosMode table |
| 1.3.6.1.4.1.20044.12.6.2.18.1.1 | Columnpm1001pcCtrlportOosModeIndex | read-only | current | Index definition for the pm1001pcCtrlportOosMode table |
| 1.3.6.1.4.1.20044.12.6.2.18.1.2 | Columnpm1001pcCtrlportOosModePortn | read-write | current | Client Port Out Of Service :This OID sets the client port Out Of Service <Help> This controls defines the service state of the client port |
| 1.3.6.1.4.1.20044.12.6.2.20 | Tablepm1001pcCtrlxfpOffCtrlTable | not-accessible | current | List of pm1001pcCtrlxfpOffCtrl Article |
| 1.3.6.1.4.1.20044.12.6.2.20.1 | Rowpm1001pcCtrlxfpOffCtrlEntry | not-accessible | current | Row definition for the pm1001pcCtrlxfpOffCtrl table |
| 1.3.6.1.4.1.20044.12.6.2.20.1.1 | Columnpm1001pcCtrlxfpOffCtrlIndex | read-only | current | Index definition for the pm1001pcCtrlxfpOffCtrl table |
| 1.3.6.1.4.1.20044.12.6.2.20.1.2 | Columnpm1001pcCtrlxfpOffCtrlPortn | read-write | current | Client Optical Laser Shutdown :This OID switches off the XFP. <Help> This control defines the laser state of the client transceiver |
| 1.3.6.1.4.1.20044.12.6.2.21 | Tablepm1001pcCtrlcsfUpInsTable | not-accessible | current | List of pm1001pcCtrlcsfUpIns Article |
| 1.3.6.1.4.1.20044.12.6.2.21.1 | Rowpm1001pcCtrlcsfUpInsEntry | not-accessible | current | Row definition for the pm1001pcCtrlcsfUpIns table |
| 1.3.6.1.4.1.20044.12.6.2.21.1.1 | Columnpm1001pcCtrlcsfUpInsIndex | read-only | current | Index definition for the pm1001pcCtrlcsfUpIns table |
| 1.3.6.1.4.1.20044.12.6.2.21.1.2 | Columnpm1001pcCtrlcsfUpInsPortn | read-write | current | Client Signal Fail Insertion :This OID, when set, inserts a client signal fail in the upstream client Port. <Help> This control inserts a Client Signal Fail fo… |
| 1.3.6.1.4.1.20044.12.6.2.22 | Tablepm1001pcCtrlcaisDwInsTable | not-accessible | current | List of pm1001pcCtrlcaisDwIns Article |
| 1.3.6.1.4.1.20044.12.6.2.22.1 | Rowpm1001pcCtrlcaisDwInsEntry | not-accessible | current | Row definition for the pm1001pcCtrlcaisDwIns table |
| 1.3.6.1.4.1.20044.12.6.2.22.1.1 | Columnpm1001pcCtrlcaisDwInsIndex | read-only | current | Index definition for the pm1001pcCtrlcaisDwIns table |
| 1.3.6.1.4.1.20044.12.6.2.22.1.2 | Columnpm1001pcCtrlcaisDwInsPortn | read-write | current | Client AIS Insertion :This OID, when set, inserts a client AIS on the downstream client Port. <Help> This control inserts a Client AIS for the client port |
| 1.3.6.1.4.1.20044.12.6.2.23 | Tablepm1001pcCtrlflowControlTable | not-accessible | current | List of pm1001pcCtrlflowControl Article |
| 1.3.6.1.4.1.20044.12.6.2.23.1 | Rowpm1001pcCtrlflowControlEntry | not-accessible | current | Row definition for the pm1001pcCtrlflowControl table |
| 1.3.6.1.4.1.20044.12.6.2.23.1.1 | Columnpm1001pcCtrlflowControlIndex | read-only | current | Index definition for the pm1001pcCtrlflowControl table |
| 1.3.6.1.4.1.20044.12.6.2.23.1.2 | Columnpm1001pcCtrlflowControlPortn | read-write | current | Flow Control :This OID, when set, asserts a Pause Frame management on the client Port. |
| 1.3.6.1.4.1.20044.12.6.2.25 | Scalarpm1001pcCtrlfiberLength | read-write | current | Client Fiber Length [0-24] :This OID defines the fiber length (in steps of 0.2 km) between the module client port and the 10GbE router (this OID has no effect … |
| 1.3.6.1.4.1.20044.12.6.2.26 | Tablepm1001pcCtrlclientAccessTermLoopTable | not-accessible | current | List of pm1001pcCtrlclientAccessTermLoop Article |
| 1.3.6.1.4.1.20044.12.6.2.26.1 | Rowpm1001pcCtrlclientAccessTermLoopEntry | not-accessible | current | Row definition for the pm1001pcCtrlclientAccessTermLoop table |
| 1.3.6.1.4.1.20044.12.6.2.26.1.1 | Columnpm1001pcCtrlclientAccessTermLoopIndex | read-only | current | Index definition for the pm1001pcCtrlclientAccessTermLoop table |
| 1.3.6.1.4.1.20044.12.6.2.26.1.2 | Columnpm1001pcCtrlclientAccessTermLoopPortn | read-write | current | Client Terminal Loopback :This OID operates a Client Terminal Loopback, looping client input signal on the client output port. The loop is located on the line … |
| 1.3.6.1.4.1.20044.12.6.2.39 | Tablepm1001pcCtrlxfpXfiLoopTable | not-accessible | current | List of pm1001pcCtrlxfpXfiLoop Article |
| 1.3.6.1.4.1.20044.12.6.2.39.1 | Rowpm1001pcCtrlxfpXfiLoopEntry | not-accessible | current | Row definition for the pm1001pcCtrlxfpXfiLoop table |
| 1.3.6.1.4.1.20044.12.6.2.39.1.1 | Columnpm1001pcCtrlxfpXfiLoopIndex | read-only | current | Index definition for the pm1001pcCtrlxfpXfiLoop table |
| 1.3.6.1.4.1.20044.12.6.2.39.1.2 | Columnpm1001pcCtrlxfpXfiLoopPortn | read-write | current | Client XFP/OTX XFI Loop :This OID operates a line loopback on the client XFP or the OTX <Help> This control defines the XFI loop back of the client transceiver |
| 1.3.6.1.4.1.20044.12.6.3 | Nodepm1001pcCtrlLine | |||
| 1.3.6.1.4.1.20044.12.6.3.64 | Nodepm1001pcCtrlcommAccessLoop | |||
| 1.3.6.1.4.1.20044.12.6.3.64.1 | Scalarpm1001pcCtrlCommAccessloop | read-write | deprecated | PM Full Access Loop Mode :This OID, when set, puts the module in common access loop back, looping the 10 Gb/s output signal on the 10 Gb/s input. |
| 1.3.6.1.4.1.20044.12.6.3.66 | Nodepm1001pcCtrllineLoop | |||
| 1.3.6.1.4.1.20044.12.6.3.66.1 | Scalarpm1001pcCtrlLineLoop | read-write | current | Line Facility Loopback :This OID operates a Line Facility Loopback, looping line input signal on the line output port. The loop is located on the line transcei… |
| 1.3.6.1.4.1.20044.12.6.3.67 | Nodepm1001pcCtrlmsAis | |||
| 1.3.6.1.4.1.20044.12.6.3.67.1 | Scalarpm1001pcCtrlMsAis | read-write | current | Insert MS-AIS/L-AIS On Line Output :This OID, when set, inserts an MS-AIS/L-AIS in the outgoing STM-64/OC-192 signal. |
| 1.3.6.1.4.1.20044.12.6.3.74 | Nodepm1001pcCtrllineOosMode | |||
| 1.3.6.1.4.1.20044.12.6.3.74.1 | Scalarpm1001pcCtrlLineOosMode | read-write | current | Line Port Out Of Service :This OID sets the line port Out Of Service <Help> This control defines the service state of the line port |
| 1.3.6.1.4.1.20044.12.6.3.208 | Tablepm1001pcCtrlxfpOnoffTable | not-accessible | current | List of pm1001pcCtrlxfpOnoff Article |
| 1.3.6.1.4.1.20044.12.6.3.208.1 | Rowpm1001pcCtrlxfpOnoffEntry | not-accessible | current | Row definition for the pm1001pcCtrlxfpOnoff table |
| 1.3.6.1.4.1.20044.12.6.3.208.1.1 | Columnpm1001pcCtrlxfpOnoffIndex | read-only | current | Index definition for the pm1001pcCtrlxfpOnoff table |
| 1.3.6.1.4.1.20044.12.6.3.208.1.2 | Columnpm1001pcCtrlxfpOnoffPortn | read-write | current | Line Optical Laser Shutdown :This OID switches off the XFP or the OTX <Help> This control defines the laser state of the line transceiver |
| 1.3.6.1.4.1.20044.12.6.3.209 | Tablepm1001pcCtrlxfpLineLoopTable | not-accessible | current | List of pm1001pcCtrlxfpLineLoop Article |
| 1.3.6.1.4.1.20044.12.6.3.209.1 | Rowpm1001pcCtrlxfpLineLoopEntry | not-accessible | current | Row definition for the pm1001pcCtrlxfpLineLoop table |
| 1.3.6.1.4.1.20044.12.6.3.209.1.1 | Columnpm1001pcCtrlxfpLineLoopIndex | read-only | current | Index definition for the pm1001pcCtrlxfpLineLoop table |
| 1.3.6.1.4.1.20044.12.6.3.209.1.2 | Columnpm1001pcCtrlxfpLineLoopPortn | read-write | current | Line XFP/OTX Loop :This OID operates a line loopback on the line XFP or the OTX <Help> This control defines the line loop back of the line transceiver |
| 1.3.6.1.4.1.20044.12.6.3.210 | Tablepm1001pcCtrlxfpLineXfiLoopTable | not-accessible | current | List of pm1001pcCtrlxfpLineXfiLoop Article |
| 1.3.6.1.4.1.20044.12.6.3.210.1 | Rowpm1001pcCtrlxfpLineXfiLoopEntry | not-accessible | current | Row definition for the pm1001pcCtrlxfpLineXfiLoop table |
| 1.3.6.1.4.1.20044.12.6.3.210.1.1 | Columnpm1001pcCtrlxfpLineXfiLoopIndex | read-only | current | Index definition for the pm1001pcCtrlxfpLineXfiLoop table |
| 1.3.6.1.4.1.20044.12.6.3.210.1.2 | Columnpm1001pcCtrlxfpLineXfiLoopPortn | read-write | current | Line XFP/OTX XFI Loop :This OID operates a XFI loopback on the line XFP or the OTX <Help> This control defines the XFI loop back of the line transceiver |
| 1.3.6.1.4.1.20044.12.6.3.218 | Tablepm1001pcCtrllineLoopTransceiverTable | not-accessible | current | List of pm1001pcCtrllineLoopTransceiver Article |
| 1.3.6.1.4.1.20044.12.6.3.218.1 | Rowpm1001pcCtrllineLoopTransceiverEntry | not-accessible | current | Row definition for the pm1001pcCtrllineLoopTransceiver table |
| 1.3.6.1.4.1.20044.12.6.3.218.1.1 | Columnpm1001pcCtrllineLoopTransceiverIndex | read-only | current | Index definition for the pm1001pcCtrllineLoopTransceiver table |
| 1.3.6.1.4.1.20044.12.6.3.218.1.2 | Columnpm1001pcCtrllineLoopTransceiverPortn | read-write | current | Line Terminal Loopback :This OID operates a Line Terminal Loopback, looping line input signal on the line output port. The loop is located on all client transc… |
| 1.3.6.1.4.1.20044.12.7 | Nodepm1001pcri | |||
| 1.3.6.1.4.1.20044.12.7.1 | Nodepm1001pcriTable | |||
| 1.3.6.1.4.1.20044.12.7.2 | Scalarpm1001pcRinvReloadInventory | read-write | current | Reload the inventory: This OID triggers an inventory reload. |
| 1.3.6.1.4.1.20044.12.7.3 | Scalarpm1001pcRinvHwPlatform | read-only | current | HW platform description: This OID contains the description of the Hardware platform. |
| 1.3.6.1.4.1.20044.12.7.4 | Scalarpm1001pcRinvModulePlatform | read-only | current | Module platform description: This OID contains the description of the Module. |
| 1.3.6.1.4.1.20044.12.7.5 | Scalarpm1001pcRinvSwPlatform | read-only | current | SW platform description: This OID contains the description of the Software platform. |
| 1.3.6.1.4.1.20044.12.7.6 | Scalarpm1001pcRinvGwPlatform | read-only | current | GW platform desciption: This OID contains the description of the Gateware platform. |
| 1.3.6.1.4.1.20044.12.7.7 | Scalarpm1001pcRinvClient | read-only | current | Inventory for the Client port: This OID contains the inventory for the Client port. |
| 1.3.6.1.4.1.20044.12.7.8 | Scalarpm1001pcRinvLine | read-only | current | Inventory for the Line: This OID contains the inventory for the Line. |
| 1.3.6.1.4.1.20044.12.8 | Nodepm1001pcdownload | |||
| 1.3.6.1.4.1.20044.12.8.1 | Nodepm1001pcDwlOther | |||
| 1.3.6.1.4.1.20044.12.8.1.0 | Nodepm1001pcDwlrestartProcess | |||
| 1.3.6.1.4.1.20044.12.8.1.0.1 | Scalarpm1001pcDwlWarmRestartProcessed | read-only | current | Warm Restart :This OID indicates that the module last restart was a Warm RESTART |
| 1.3.6.1.4.1.20044.12.8.1.0.2 | Scalarpm1001pcDwlColdRestartProcessed | read-only | current | Cold Restart :This OID indicates that the module last restart was a Cold RESTART |
| 1.3.6.1.4.1.20044.12.8.1.1 | Nodepm1001pcDwlswBanksUsed | |||
| 1.3.6.1.4.1.20044.12.8.1.1.1 | Scalarpm1001pcDwlSwBank1Used | read-only | current | SW bank 1 active :This OID indicates the module is working on SW bank 1 <Help> This status indicates if the SW bank 1 is active or standby |
| 1.3.6.1.4.1.20044.12.8.1.1.2 | Scalarpm1001pcDwlSwBank2Used | read-only | current | SW bank 2 active :This OID indicates the module is working on SW bank 2 <Help> This status indicates if the SW bank 2 is active or standby |
| 1.3.6.1.4.1.20044.12.8.1.1.5 | Scalarpm1001pcDwlSwBank1Notempty | read-only | current | SW bank 1 loaded :This OID indicates a software is loaded in SW bank 1 <Help> This status indicates if the SW bank 1 contains SW package |
| 1.3.6.1.4.1.20044.12.8.1.1.6 | Scalarpm1001pcDwlSwBank2Notempty | read-only | current | SW bank 2 loaded :This OID indicates a software is loaded in SW bank 2 <Help> This status indicates if the SW bank 2 contains SW package |
| 1.3.6.1.4.1.20044.12.8.1.2 | Nodepm1001pcDwlgwBanksUsed | |||
| 1.3.6.1.4.1.20044.12.8.1.2.1 | Scalarpm1001pcDwlGwBank1Used | read-only | current | GW bank 1 active :This OID indicates the module is working on GW bank 1 <Help> This status indicates if the GW bank 1 is active or standby |
| 1.3.6.1.4.1.20044.12.8.1.2.2 | Scalarpm1001pcDwlGwBank2Used | read-only | deprecated | GW bank 2 active :This OID indicates the module is working on GW bank 2 |
| 1.3.6.1.4.1.20044.12.8.1.2.3 | Scalarpm1001pcDwlGwBank3Used | read-only | current | GW bank 3 active :This OID indicates the module is working on GW bank 3 <Help> This status indicates if the GW bank 3 is active or standby |
| 1.3.6.1.4.1.20044.12.8.1.2.4 | Scalarpm1001pcDwlGwBank4Used | read-only | deprecated | GW bank 4 active :This OID indicates the module is working on GW bank 4 |
| 1.3.6.1.4.1.20044.12.8.1.2.5 | Scalarpm1001pcDwlGwBank1Notempty | read-only | current | GW bank 1 loaded :This OID indicates a gateware is loaded in GW bank 1 <Help> This status indicates if the GW bank 1 contains GW package |
| 1.3.6.1.4.1.20044.12.8.1.2.6 | Scalarpm1001pcDwlGwBank2Notempty | read-only | deprecated | GW bank 2 loaded :This OID indicates a gateware is loaded in GW bank 2 |
| 1.3.6.1.4.1.20044.12.8.1.2.7 | Scalarpm1001pcDwlGwBank3Notempty | read-only | current | GW bank 3 loaded :This OID indicates a gateware is loaded in GW bank 3 <Help> This status indicates if the GW bank 3 contains GW package |
| 1.3.6.1.4.1.20044.12.8.1.2.8 | Scalarpm1001pcDwlGwBank4Notempty | read-only | deprecated | GW bank 4 loaded :This OID indicates a gateware is loaded in GW bank 4 |
| 1.3.6.1.4.1.20044.12.8.2 | Nodepm1001pcDwlClient | |||
| 1.3.6.1.4.1.20044.12.8.3 | Nodepm1001pcDwlLine | |||
| 1.3.6.1.4.1.20044.12.9 | Nodepm1001pcrmon | |||
| 1.3.6.1.4.1.20044.12.9.1 | Nodepm1001pcRmonOther | |||
| 1.3.6.1.4.1.20044.12.9.1.359 | Scalarpm1001pcMonCountersReset | read-write | current | RMON Counters Reset:This OID resets and restarts all the RMON counters |
| 1.3.6.1.4.1.20044.12.9.1.360 | Scalarpm1001pcMonCountersStop | read-write | current | RMON Counters stop:This OID stops all the RMON counters |
| 1.3.6.1.4.1.20044.12.9.2 | Nodepm1001pcRmonClient | |||
| 1.3.6.1.4.1.20044.12.9.2.16 | Tablepm1001pcMonupRmonByteCntTable | not-accessible | current | List of pm1001pcMonupRmonByteCnt Article |
| 1.3.6.1.4.1.20044.12.9.2.16.1 | Rowpm1001pcMonupRmonByteCntEntry | not-accessible | current | Row definition for the pm1001pcMonupRmonByteCnt table |
| 1.3.6.1.4.1.20044.12.9.2.16.1.1 | Columnpm1001pcMonupRmonByteCntIndex | read-only | current | Index definition for the pm1001pcMonupRmonByteCnt table |
| 1.3.6.1.4.1.20044.12.9.2.16.1.2 | Columnpm1001pcMonupRmonByteCntValuePortn | read-only | current | Client Input Bytes :This counter is increased each time a data byte is received on the client port |
| 1.3.6.1.4.1.20044.12.9.2.16.1.3 | Columnpm1001pcMonupRmonByteCntErrorPortn | read-only | current | Input Bytes Counter Error :This OID when set indicates the input Bytes counter value is invalid on client port |
| 1.3.6.1.4.1.20044.12.9.2.16.1.4 | Columnpm1001pcMonupRmonByteCntOverloadPortn | read-only | current | Input Bytes Counter Overload :This OID when set indicates an input Bytes counter overload on client port |
| 1.3.6.1.4.1.20044.12.9.2.24 | Tablepm1001pcMonupRmonCrcErrorCntTable | not-accessible | current | List of pm1001pcMonupRmonCrcErrorCnt Article |
| 1.3.6.1.4.1.20044.12.9.2.24.1 | Rowpm1001pcMonupRmonCrcErrorCntEntry | not-accessible | current | Row definition for the pm1001pcMonupRmonCrcErrorCnt table |
| 1.3.6.1.4.1.20044.12.9.2.24.1.1 | Columnpm1001pcMonupRmonCrcErrorCntIndex | read-only | current | Index definition for the pm1001pcMonupRmonCrcErrorCnt table |
| 1.3.6.1.4.1.20044.12.9.2.24.1.2 | Columnpm1001pcMonupRmonCrcErrorCntValuePortn | read-only | current | Client Input CRC Errors :This counter is increased each time a CRC error is detected on the input client port <Help> This counter gives the number of CRC Error… |
| 1.3.6.1.4.1.20044.12.9.2.24.1.3 | Columnpm1001pcMonupRmonCrcErrorCntErrorPortn | read-only | current | Input CRC Errors Counter Error :This OID when set indicates the input CRC Errors counter value is invalid on client port |
| 1.3.6.1.4.1.20044.12.9.2.24.1.4 | Columnpm1001pcMonupRmonCrcErrorCntOverloadPortn | read-only | current | Input CRC Errors Counter Overload :This OID when set indicates an input CRC Errors counter overload on client port |
| 1.3.6.1.4.1.20044.12.9.2.32 | Tablepm1001pcMonupRmonPacketsCntTable | not-accessible | current | List of pm1001pcMonupRmonPacketsCnt Article |
| 1.3.6.1.4.1.20044.12.9.2.32.1 | Rowpm1001pcMonupRmonPacketsCntEntry | not-accessible | current | Row definition for the pm1001pcMonupRmonPacketsCnt table |
| 1.3.6.1.4.1.20044.12.9.2.32.1.1 | Columnpm1001pcMonupRmonPacketsCntIndex | read-only | current | Index definition for the pm1001pcMonupRmonPacketsCnt table |
| 1.3.6.1.4.1.20044.12.9.2.32.1.2 | Columnpm1001pcMonupRmonPacketsCntValuePortn | read-only | current | Client Input Packets :This counter is increased each time a packet is received on the client port |
| 1.3.6.1.4.1.20044.12.9.2.32.1.3 | Columnpm1001pcMonupRmonPacketsCntErrorPortn | read-only | current | Input Packets Counter Error :This OID when set indicates the input Packets counter value is invalid on client port |
| 1.3.6.1.4.1.20044.12.9.2.32.1.4 | Columnpm1001pcMonupRmonPacketsCntOverloadPortn | read-only | current | Input Packets Counter Overload :This OID when set indicates an input Packets counter overload on client port |
| 1.3.6.1.4.1.20044.12.9.2.40 | Tablepm1001pcMonupRmonBroadcastCntTable | not-accessible | current | List of pm1001pcMonupRmonBroadcastCnt Article |
| 1.3.6.1.4.1.20044.12.9.2.40.1 | Rowpm1001pcMonupRmonBroadcastCntEntry | not-accessible | current | Row definition for the pm1001pcMonupRmonBroadcastCnt table |
| 1.3.6.1.4.1.20044.12.9.2.40.1.1 | Columnpm1001pcMonupRmonBroadcastCntIndex | read-only | current | Index definition for the pm1001pcMonupRmonBroadcastCnt table |
| 1.3.6.1.4.1.20044.12.9.2.40.1.2 | Columnpm1001pcMonupRmonBroadcastCntValuePortn | read-only | current | Client Input Broadcast Packets :This counter is increased each time a broadcast packet is received on the client port |
| 1.3.6.1.4.1.20044.12.9.2.40.1.3 | Columnpm1001pcMonupRmonBroadcastCntErrorPortn | read-only | current | Input Broadcast Counter Error :This OID when set indicates the input Broadcast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.12.9.2.40.1.4 | Columnpm1001pcMonupRmonBroadcastCntOverloadPortn | read-only | current | Input Broadcast Counter Overload :This OID when set indicates an input Broadcast counter overload on client port |
| 1.3.6.1.4.1.20044.12.9.2.48 | Tablepm1001pcMonupRmonMulticastCntTable | not-accessible | current | List of pm1001pcMonupRmonMulticastCnt Article |
| 1.3.6.1.4.1.20044.12.9.2.48.1 | Rowpm1001pcMonupRmonMulticastCntEntry | not-accessible | current | Row definition for the pm1001pcMonupRmonMulticastCnt table |
| 1.3.6.1.4.1.20044.12.9.2.48.1.1 | Columnpm1001pcMonupRmonMulticastCntIndex | read-only | current | Index definition for the pm1001pcMonupRmonMulticastCnt table |
| 1.3.6.1.4.1.20044.12.9.2.48.1.2 | Columnpm1001pcMonupRmonMulticastCntValuePortn | read-only | current | Client Input Multicast Packets :This counter is increased each time a Multicast packet is received on the client port |
| 1.3.6.1.4.1.20044.12.9.2.48.1.3 | Columnpm1001pcMonupRmonMulticastCntErrorPortn | read-only | current | Input Multicast Counter Error :This OID when set indicates the input Multicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.12.9.2.48.1.4 | Columnpm1001pcMonupRmonMulticastCntOverloadPortn | read-only | current | Input Multicast Counter Overload :This OID when set indicates an input Multicast counter overload on client port |
| 1.3.6.1.4.1.20044.12.9.2.56 | Tablepm1001pcMonupRmonTimerCntTable | not-accessible | current | List of pm1001pcMonupRmonTimerCnt Article |
| 1.3.6.1.4.1.20044.12.9.2.56.1 | Rowpm1001pcMonupRmonTimerCntEntry | not-accessible | current | Row definition for the pm1001pcMonupRmonTimerCnt table |
| 1.3.6.1.4.1.20044.12.9.2.56.1.1 | Columnpm1001pcMonupRmonTimerCntIndex | read-only | current | Index definition for the pm1001pcMonupRmonTimerCnt table |
| 1.3.6.1.4.1.20044.12.9.2.56.1.2 | Columnpm1001pcMonupRmonTimerCntValuePortn | read-only | current | RMON Timer On Client Input :This is the timing counter dedicated to the upstream RMON counters. It is incremented every 125 us. |
| 1.3.6.1.4.1.20044.12.9.2.56.1.3 | Columnpm1001pcMonupRmonTimerCntErrorPortn | read-only | current | Input RMON Timer Error :This OID when set indicates the input RMON timer is invalid on client port |
| 1.3.6.1.4.1.20044.12.9.2.56.1.4 | Columnpm1001pcMonupRmonTimerCntOverloadPortn | read-only | current | Input RMON Timer Overload :This OID when set indicates an input RMON timer overload on client port |
| 1.3.6.1.4.1.20044.12.9.2.64 | Tablepm1001pcMonupRmonPauseFrameCntTable | not-accessible | current | List of pm1001pcMonupRmonPauseFrameCnt Article |
| 1.3.6.1.4.1.20044.12.9.2.64.1 | Rowpm1001pcMonupRmonPauseFrameCntEntry | not-accessible | current | Row definition for the pm1001pcMonupRmonPauseFrameCnt table |
| 1.3.6.1.4.1.20044.12.9.2.64.1.1 | Columnpm1001pcMonupRmonPauseFrameCntIndex | read-only | current | Index definition for the pm1001pcMonupRmonPauseFrameCnt table |
| 1.3.6.1.4.1.20044.12.9.2.64.1.2 | Columnpm1001pcMonupRmonPauseFrameCntValuePortn | read-only | current | Client Input Pause Frames :This counter is increased each time a Pause frame is received on the client port |
| 1.3.6.1.4.1.20044.12.9.2.64.1.3 | Columnpm1001pcMonupRmonPauseFrameCntErrorPortn | read-only | current | Input Pause Counter Error :This OID when set indicates the input Pause counter value is invalid on client port |
| 1.3.6.1.4.1.20044.12.9.2.64.1.4 | Columnpm1001pcMonupRmonPauseFrameCntOverloadPortn | read-only | current | Input Pause Counter Overload :This OID when set indicates an input Pause counter overload on client port |
| 1.3.6.1.4.1.20044.12.9.2.72 | Tablepm1001pcMonupRmonDropFrameCntTable | not-accessible | current | List of pm1001pcMonupRmonDropFrameCnt Article |
| 1.3.6.1.4.1.20044.12.9.2.72.1 | Rowpm1001pcMonupRmonDropFrameCntEntry | not-accessible | current | Row definition for the pm1001pcMonupRmonDropFrameCnt table |
| 1.3.6.1.4.1.20044.12.9.2.72.1.1 | Columnpm1001pcMonupRmonDropFrameCntIndex | read-only | current | Index definition for the pm1001pcMonupRmonDropFrameCnt table |
| 1.3.6.1.4.1.20044.12.9.2.72.1.2 | Columnpm1001pcMonupRmonDropFrameCntValuePortn | read-only | current | Client Input Drop Packets :This counter is increased each time a Frame is dropped on the input client port |
| 1.3.6.1.4.1.20044.12.9.2.72.1.3 | Columnpm1001pcMonupRmonDropFrameCntErrorPortn | read-only | current | Input Drop Counter Error :This OID when set indicates the input Drop counter value is invalid on client port |
| 1.3.6.1.4.1.20044.12.9.2.72.1.4 | Columnpm1001pcMonupRmonDropFrameCntOverloadPortn | read-only | current | Input Drop Counter Overload :This OID when set indicates an input Drop counter overload on client port |
| 1.3.6.1.4.1.20044.12.9.2.80 | Tablepm1001pcMonupRmonBitsCntTable | not-accessible | current | List of pm1001pcMonupRmonBitsCnt Article |
| 1.3.6.1.4.1.20044.12.9.2.80.1 | Rowpm1001pcMonupRmonBitsCntEntry | not-accessible | current | Row definition for the pm1001pcMonupRmonBitsCnt table |
| 1.3.6.1.4.1.20044.12.9.2.80.1.1 | Columnpm1001pcMonupRmonBitsCntIndex | read-only | current | Index definition for the pm1001pcMonupRmonBitsCnt table |
| 1.3.6.1.4.1.20044.12.9.2.80.1.2 | Columnpm1001pcMonupRmonBitsCntValuePortn | read-only | current | Client Input Bits :This counter is increased each time a bit is received on the input client port |
| 1.3.6.1.4.1.20044.12.9.2.80.1.3 | Columnpm1001pcMonupRmonBitsCntErrorPortn | read-only | current | Input Bits Counter Error :This OID when set indicates the input Bits counter value is invalid on client port |
| 1.3.6.1.4.1.20044.12.9.2.80.1.4 | Columnpm1001pcMonupRmonBitsCntOverloadPortn | read-only | current | Input Bits Counter Overload :This OID when set indicates an input Bits counter overload on client port |
| 1.3.6.1.4.1.20044.12.9.2.112 | Tablepm1001pcMondwRmonByteCntTable | not-accessible | current | List of pm1001pcMondwRmonByteCnt Article |
| 1.3.6.1.4.1.20044.12.9.2.112.1 | Rowpm1001pcMondwRmonByteCntEntry | not-accessible | current | Row definition for the pm1001pcMondwRmonByteCnt table |
| 1.3.6.1.4.1.20044.12.9.2.112.1.1 | Columnpm1001pcMondwRmonByteCntIndex | read-only | current | Index definition for the pm1001pcMondwRmonByteCnt table |
| 1.3.6.1.4.1.20044.12.9.2.112.1.2 | Columnpm1001pcMondwRmonByteCntValuePortn | read-only | current | Client Output Bytes :This counter is increased each time a data byte is transmitted on the client port |
| 1.3.6.1.4.1.20044.12.9.2.112.1.3 | Columnpm1001pcMondwRmonByteCntErrorPortn | read-only | current | Output Bytes Counter Error :This OID when set indicates the output Bytes counter value is invalid on client port |
| 1.3.6.1.4.1.20044.12.9.2.112.1.4 | Columnpm1001pcMondwRmonByteCntOverloadPortn | read-only | current | Output Bytes Counter Overload :This OID when set indicates an output Bytes counter overload on client port |
| 1.3.6.1.4.1.20044.12.9.2.120 | Tablepm1001pcMondwRmonCrcErrorCntTable | not-accessible | current | List of pm1001pcMondwRmonCrcErrorCnt Article |
| 1.3.6.1.4.1.20044.12.9.2.120.1 | Rowpm1001pcMondwRmonCrcErrorCntEntry | not-accessible | current | Row definition for the pm1001pcMondwRmonCrcErrorCnt table |
| 1.3.6.1.4.1.20044.12.9.2.120.1.1 | Columnpm1001pcMondwRmonCrcErrorCntIndex | read-only | current | Index definition for the pm1001pcMondwRmonCrcErrorCnt table |
| 1.3.6.1.4.1.20044.12.9.2.120.1.2 | Columnpm1001pcMondwRmonCrcErrorCntValuePortn | read-only | current | Client Output CRC Errors :This counter is increased each time a CRC error is detected on the output client port <Help> This counter gives the number of CRC Err… |
| 1.3.6.1.4.1.20044.12.9.2.120.1.3 | Columnpm1001pcMondwRmonCrcErrorCntErrorPortn | read-only | current | Output CRC Errors Counter Error :This OID when set indicates the output CRC Errors counter value is invalid on client port |
| 1.3.6.1.4.1.20044.12.9.2.120.1.4 | Columnpm1001pcMondwRmonCrcErrorCntOverloadPortn | read-only | current | Output CRC Errors Counter Overload :This OID when set indicates an output CRC Errors counter overload on client port |
| 1.3.6.1.4.1.20044.12.9.2.128 | Tablepm1001pcMondwRmonPacketsCntTable | not-accessible | current | List of pm1001pcMondwRmonPacketsCnt Article |
| 1.3.6.1.4.1.20044.12.9.2.128.1 | Rowpm1001pcMondwRmonPacketsCntEntry | not-accessible | current | Row definition for the pm1001pcMondwRmonPacketsCnt table |
| 1.3.6.1.4.1.20044.12.9.2.128.1.1 | Columnpm1001pcMondwRmonPacketsCntIndex | read-only | current | Index definition for the pm1001pcMondwRmonPacketsCnt table |
| 1.3.6.1.4.1.20044.12.9.2.128.1.2 | Columnpm1001pcMondwRmonPacketsCntValuePortn | read-only | current | Client Output Packets :This counter is increased each time a packet is transmitted on the client port |
| 1.3.6.1.4.1.20044.12.9.2.128.1.3 | Columnpm1001pcMondwRmonPacketsCntErrorPortn | read-only | current | Output Packets Counter Error :This OID when set indicates the output Packets counter value is invalid on client port |
| 1.3.6.1.4.1.20044.12.9.2.128.1.4 | Columnpm1001pcMondwRmonPacketsCntOverloadPortn | read-only | current | Output Packets Counter Overload :This OID when set indicates an output Packets counter overload on client port |
| 1.3.6.1.4.1.20044.12.9.2.136 | Tablepm1001pcMondwRmonBroadcastCntTable | not-accessible | current | List of pm1001pcMondwRmonBroadcastCnt Article |
| 1.3.6.1.4.1.20044.12.9.2.136.1 | Rowpm1001pcMondwRmonBroadcastCntEntry | not-accessible | current | Row definition for the pm1001pcMondwRmonBroadcastCnt table |
| 1.3.6.1.4.1.20044.12.9.2.136.1.1 | Columnpm1001pcMondwRmonBroadcastCntIndex | read-only | current | Index definition for the pm1001pcMondwRmonBroadcastCnt table |
| 1.3.6.1.4.1.20044.12.9.2.136.1.2 | Columnpm1001pcMondwRmonBroadcastCntValuePortn | read-only | current | Client Output Broadcast Packets :This counter is increased each time a broadcast packet is transmitted on the client port |
| 1.3.6.1.4.1.20044.12.9.2.136.1.3 | Columnpm1001pcMondwRmonBroadcastCntErrorPortn | read-only | current | Output Broadcast Counter Error :This OID when set indicates the output Broadcast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.12.9.2.136.1.4 | Columnpm1001pcMondwRmonBroadcastCntOverloadPortn | read-only | current | Output Broadcast Counter Overload :This OID when set indicates an output Broadcast counter overload on client port |
| 1.3.6.1.4.1.20044.12.9.2.144 | Tablepm1001pcMondwRmonMulticastCntTable | not-accessible | current | List of pm1001pcMondwRmonMulticastCnt Article |
| 1.3.6.1.4.1.20044.12.9.2.144.1 | Rowpm1001pcMondwRmonMulticastCntEntry | not-accessible | current | Row definition for the pm1001pcMondwRmonMulticastCnt table |
| 1.3.6.1.4.1.20044.12.9.2.144.1.1 | Columnpm1001pcMondwRmonMulticastCntIndex | read-only | current | Index definition for the pm1001pcMondwRmonMulticastCnt table |
| 1.3.6.1.4.1.20044.12.9.2.144.1.2 | Columnpm1001pcMondwRmonMulticastCntValuePortn | read-only | current | Client Output Multicast Packets :This counter is increased each time a Multicast packet is transmitted on the client port |
| 1.3.6.1.4.1.20044.12.9.2.144.1.3 | Columnpm1001pcMondwRmonMulticastCntErrorPortn | read-only | current | Output Multicast Counter Error :This OID when set indicates the output Multicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.12.9.2.144.1.4 | Columnpm1001pcMondwRmonMulticastCntOverloadPortn | read-only | current | Output Multicast Counter Overload :This OID when set indicates an output Multicast counter overload on client port |
| 1.3.6.1.4.1.20044.12.9.2.152 | Tablepm1001pcMondwRmonPauseFrameCntTable | not-accessible | current | List of pm1001pcMondwRmonPauseFrameCnt Article |
| 1.3.6.1.4.1.20044.12.9.2.152.1 | Rowpm1001pcMondwRmonPauseFrameCntEntry | not-accessible | current | Row definition for the pm1001pcMondwRmonPauseFrameCnt table |
| 1.3.6.1.4.1.20044.12.9.2.152.1.1 | Columnpm1001pcMondwRmonPauseFrameCntIndex | read-only | current | Index definition for the pm1001pcMondwRmonPauseFrameCnt table |
| 1.3.6.1.4.1.20044.12.9.2.152.1.2 | Columnpm1001pcMondwRmonPauseFrameCntValuePortn | read-only | current | Client Output Pause Frames :This counter is increased each time a Pause frame is generated by the PM on the client port |
| 1.3.6.1.4.1.20044.12.9.2.152.1.3 | Columnpm1001pcMondwRmonPauseFrameCntErrorPortn | read-only | current | Output Pause Counter Error :This OID when set indicates the output Pause counter value is invalid on client port |
| 1.3.6.1.4.1.20044.12.9.2.152.1.4 | Columnpm1001pcMondwRmonPauseFrameCntOverloadPortn | read-only | current | Output Pause Counter Overload :This OID when set indicates an output Pause counter overload on client port |
| 1.3.6.1.4.1.20044.12.9.2.160 | Tablepm1001pcMondwRmonTimerCntTable | not-accessible | current | List of pm1001pcMondwRmonTimerCnt Article |
| 1.3.6.1.4.1.20044.12.9.2.160.1 | Rowpm1001pcMondwRmonTimerCntEntry | not-accessible | current | Row definition for the pm1001pcMondwRmonTimerCnt table |
| 1.3.6.1.4.1.20044.12.9.2.160.1.1 | Columnpm1001pcMondwRmonTimerCntIndex | read-only | current | Index definition for the pm1001pcMondwRmonTimerCnt table |
| 1.3.6.1.4.1.20044.12.9.2.160.1.2 | Columnpm1001pcMondwRmonTimerCntValuePortn | read-only | current | RMON Timer On Client Output :This is the timing counter dedicated to the downstream RMON counters. It is incremented every 125 us. |
| 1.3.6.1.4.1.20044.12.9.2.160.1.3 | Columnpm1001pcMondwRmonTimerCntErrorPortn | read-only | current | Output RMON Timer Error :This OID when set indicates the output RMON timer is invalid on client port |
| 1.3.6.1.4.1.20044.12.9.2.160.1.4 | Columnpm1001pcMondwRmonTimerCntOverloadPortn | read-only | current | Output RMON Timer Overload :This OID when set indicates an output RMON timer overload on client port |
| 1.3.6.1.4.1.20044.12.9.2.168 | Tablepm1001pcMondwRmonBitsCntTable | not-accessible | current | List of pm1001pcMondwRmonBitsCnt Article |
| 1.3.6.1.4.1.20044.12.9.2.168.1 | Rowpm1001pcMondwRmonBitsCntEntry | not-accessible | current | Row definition for the pm1001pcMondwRmonBitsCnt table |
| 1.3.6.1.4.1.20044.12.9.2.168.1.1 | Columnpm1001pcMondwRmonBitsCntIndex | read-only | current | Index definition for the pm1001pcMondwRmonBitsCnt table |
| 1.3.6.1.4.1.20044.12.9.2.168.1.2 | Columnpm1001pcMondwRmonBitsCntValuePortn | read-only | current | Client Output Bits :This counter is increased each time a bit is received on the Output client port |
| 1.3.6.1.4.1.20044.12.9.2.168.1.3 | Columnpm1001pcMondwRmonBitsCntErrorPortn | read-only | current | Output Bits Counter Error :This OID when set indicates the output Bits counter value is invalid on client port |
| 1.3.6.1.4.1.20044.12.9.2.168.1.4 | Columnpm1001pcMondwRmonBitsCntOverloadPortn | read-only | current | Output Bits Counter Overload :This OID when set indicates an output Bits counter overload on client port |
| 1.3.6.1.4.1.20044.12.9.2.1024 | Tablepm1001pcMonupRmonByteCntSTable | not-accessible | current | List of pm1001pcMonupRmonByteCntS Article |
| 1.3.6.1.4.1.20044.12.9.2.1024.1 | Rowpm1001pcMonupRmonByteCntSEntry | not-accessible | current | Row definition for the pm1001pcMonupRmonByteCntS table |
| 1.3.6.1.4.1.20044.12.9.2.1024.1.1 | Columnpm1001pcMonupRmonByteCntSIndex | read-only | current | Index definition for the pm1001pcMonupRmonByteCntS table |
| 1.3.6.1.4.1.20044.12.9.2.1024.1.2 | Columnpm1001pcMonupRmonByteCntSValuePortn | read-only | current | Client Input Bytes Rate (/s) :This rate indicates the number of bytes per second that are received on the client port |
| 1.3.6.1.4.1.20044.12.9.2.1024.1.3 | Columnpm1001pcMonupRmonByteCntSErrorPortn | read-only | current | Input Bytes rate error :This OID when set indicates the input Bytes rate value is invalid on client port |
| 1.3.6.1.4.1.20044.12.9.2.1024.1.4 | Columnpm1001pcMonupRmonByteCntSOverloadPortn | read-only | current | Input Bytes rate overload :This OID when set indicates an input Bytes rate overload on client port |
| 1.3.6.1.4.1.20044.12.9.2.1032 | Tablepm1001pcMonupRmonCrcErrorCntSTable | not-accessible | current | List of pm1001pcMonupRmonCrcErrorCntS Article |
| 1.3.6.1.4.1.20044.12.9.2.1032.1 | Rowpm1001pcMonupRmonCrcErrorCntSEntry | not-accessible | current | Row definition for the pm1001pcMonupRmonCrcErrorCntS table |
| 1.3.6.1.4.1.20044.12.9.2.1032.1.1 | Columnpm1001pcMonupRmonCrcErrorCntSIndex | read-only | current | Index definition for the pm1001pcMonupRmonCrcErrorCntS table |
| 1.3.6.1.4.1.20044.12.9.2.1032.1.2 | Columnpm1001pcMonupRmonCrcErrorCntSValuePortn | read-only | current | Client Input CRC Errors Rate (/s) :This rate indicates the number of CRC errors per second that are detected on the input client port |
| 1.3.6.1.4.1.20044.12.9.2.1032.1.3 | Columnpm1001pcMonupRmonCrcErrorCntSErrorPortn | read-only | current | Input CRC Errors rate error :This OID when set indicates the input CRC Errors rate value is invalid on client port |
| 1.3.6.1.4.1.20044.12.9.2.1032.1.4 | Columnpm1001pcMonupRmonCrcErrorCntSOverloadPortn | read-only | current | Input CRC Errors rate overload :This OID when set indicates an input CRC Errors rate overload on client port |
| 1.3.6.1.4.1.20044.12.9.2.1040 | Tablepm1001pcMonupRmonPacketsCntSTable | not-accessible | current | List of pm1001pcMonupRmonPacketsCntS Article |
| 1.3.6.1.4.1.20044.12.9.2.1040.1 | Rowpm1001pcMonupRmonPacketsCntSEntry | not-accessible | current | Row definition for the pm1001pcMonupRmonPacketsCntS table |
| 1.3.6.1.4.1.20044.12.9.2.1040.1.1 | Columnpm1001pcMonupRmonPacketsCntSIndex | read-only | current | Index definition for the pm1001pcMonupRmonPacketsCntS table |
| 1.3.6.1.4.1.20044.12.9.2.1040.1.2 | Columnpm1001pcMonupRmonPacketsCntSValuePortn | read-only | current | Client Input Packets Rate (/s) :This rate indicates the number of packets per second that are received on the client port |
| 1.3.6.1.4.1.20044.12.9.2.1040.1.3 | Columnpm1001pcMonupRmonPacketsCntSErrorPortn | read-only | current | Input Packets rate error :This OID when set indicates the input Packets rate value is invalid on client port |
| 1.3.6.1.4.1.20044.12.9.2.1040.1.4 | Columnpm1001pcMonupRmonPacketsCntSOverloadPortn | read-only | current | Input Packets rate overload :This OID when set indicates an input Packets rate overload on client port |
| 1.3.6.1.4.1.20044.12.9.2.1048 | Tablepm1001pcMonupRmonBroadcastCntSTable | not-accessible | current | List of pm1001pcMonupRmonBroadcastCntS Article |
| 1.3.6.1.4.1.20044.12.9.2.1048.1 | Rowpm1001pcMonupRmonBroadcastCntSEntry | not-accessible | current | Row definition for the pm1001pcMonupRmonBroadcastCntS table |
| 1.3.6.1.4.1.20044.12.9.2.1048.1.1 | Columnpm1001pcMonupRmonBroadcastCntSIndex | read-only | current | Index definition for the pm1001pcMonupRmonBroadcastCntS table |
| 1.3.6.1.4.1.20044.12.9.2.1048.1.2 | Columnpm1001pcMonupRmonBroadcastCntSValuePortn | read-only | current | Client Input Broadcast Packets Rate (/s) :This rate indicates the number of broadcast packets per second that are received on the client port |
| 1.3.6.1.4.1.20044.12.9.2.1048.1.3 | Columnpm1001pcMonupRmonBroadcastCntSErrorPortn | read-only | current | Input Broadcast rate error :This OID when set indicates the input Broadcast rate value is invalid on client port |
| 1.3.6.1.4.1.20044.12.9.2.1048.1.4 | Columnpm1001pcMonupRmonBroadcastCntSOverloadPortn | read-only | current | Input Broadcast rate overload :This OID when set indicates an input Broadcast rate overload on client port |
| 1.3.6.1.4.1.20044.12.9.2.1056 | Tablepm1001pcMonupRmonMulticastCntSTable | not-accessible | current | List of pm1001pcMonupRmonMulticastCntS Article |
| 1.3.6.1.4.1.20044.12.9.2.1056.1 | Rowpm1001pcMonupRmonMulticastCntSEntry | not-accessible | current | Row definition for the pm1001pcMonupRmonMulticastCntS table |
| 1.3.6.1.4.1.20044.12.9.2.1056.1.1 | Columnpm1001pcMonupRmonMulticastCntSIndex | read-only | current | Index definition for the pm1001pcMonupRmonMulticastCntS table |
| 1.3.6.1.4.1.20044.12.9.2.1056.1.2 | Columnpm1001pcMonupRmonMulticastCntSValuePortn | read-only | current | Client Input Multicast Packets Rate (/s) :This rate indicates the number of multicast packets per second that are received on the client port |
| 1.3.6.1.4.1.20044.12.9.2.1056.1.3 | Columnpm1001pcMonupRmonMulticastCntSErrorPortn | read-only | current | Input Multicast rate error :This OID when set indicates the input Multicast rate value is invalid on client port |
| 1.3.6.1.4.1.20044.12.9.2.1056.1.4 | Columnpm1001pcMonupRmonMulticastCntSOverloadPortn | read-only | current | Input Multicast rate overload :This OID when set indicates an input Multicast rate overload on client port |
| 1.3.6.1.4.1.20044.12.9.2.1072 | Tablepm1001pcMonupRmonPauseFrameCntSTable | not-accessible | current | List of pm1001pcMonupRmonPauseFrameCntS Article |
| 1.3.6.1.4.1.20044.12.9.2.1072.1 | Rowpm1001pcMonupRmonPauseFrameCntSEntry | not-accessible | current | Row definition for the pm1001pcMonupRmonPauseFrameCntS table |
| 1.3.6.1.4.1.20044.12.9.2.1072.1.1 | Columnpm1001pcMonupRmonPauseFrameCntSIndex | read-only | current | Index definition for the pm1001pcMonupRmonPauseFrameCntS table |
| 1.3.6.1.4.1.20044.12.9.2.1072.1.2 | Columnpm1001pcMonupRmonPauseFrameCntSValuePortn | read-only | current | Client Input Pause Frames Rate (/s) :This rate indicates the number of Pause frames per second that are received on the client port |
| 1.3.6.1.4.1.20044.12.9.2.1072.1.3 | Columnpm1001pcMonupRmonPauseFrameCntSErrorPortn | read-only | current | Input Pause rate error :This OID when set indicates the input Pause rate value is invalid on client port |
| 1.3.6.1.4.1.20044.12.9.2.1072.1.4 | Columnpm1001pcMonupRmonPauseFrameCntSOverloadPortn | read-only | current | Input Pause rate overload :This OID when set indicates an input Pause rate overload on client port |
| 1.3.6.1.4.1.20044.12.9.2.1080 | Tablepm1001pcMonupRmonDropFrameCntSTable | not-accessible | current | List of pm1001pcMonupRmonDropFrameCntS Article |
| 1.3.6.1.4.1.20044.12.9.2.1080.1 | Rowpm1001pcMonupRmonDropFrameCntSEntry | not-accessible | current | Row definition for the pm1001pcMonupRmonDropFrameCntS table |
| 1.3.6.1.4.1.20044.12.9.2.1080.1.1 | Columnpm1001pcMonupRmonDropFrameCntSIndex | read-only | current | Index definition for the pm1001pcMonupRmonDropFrameCntS table |
| 1.3.6.1.4.1.20044.12.9.2.1080.1.2 | Columnpm1001pcMonupRmonDropFrameCntSValuePortn | read-only | current | Client Input Drop Packets Rate (/s) :This rate indicates the number packets per second that are received on the input client port |
| 1.3.6.1.4.1.20044.12.9.2.1080.1.3 | Columnpm1001pcMonupRmonDropFrameCntSErrorPortn | read-only | current | Input Drop rate error :This OID when set indicates the input Drop rate value is invalid on client port |
| 1.3.6.1.4.1.20044.12.9.2.1080.1.4 | Columnpm1001pcMonupRmonDropFrameCntSOverloadPortn | read-only | current | Input Drop rate overload :This OID when set indicates an input Drop rate overload on client port |
| 1.3.6.1.4.1.20044.12.9.2.1088 | Tablepm1001pcMonupRmonBitsCntSTable | not-accessible | current | List of pm1001pcMonupRmonBitsCntS Article |
| 1.3.6.1.4.1.20044.12.9.2.1088.1 | Rowpm1001pcMonupRmonBitsCntSEntry | not-accessible | current | Row definition for the pm1001pcMonupRmonBitsCntS table |
| 1.3.6.1.4.1.20044.12.9.2.1088.1.1 | Columnpm1001pcMonupRmonBitsCntSIndex | read-only | current | Index definition for the pm1001pcMonupRmonBitsCntS table |
| 1.3.6.1.4.1.20044.12.9.2.1088.1.2 | Columnpm1001pcMonupRmonBitsCntSValuePortn | read-only | current | Client Input Bits Rate (/s) :This rate indicates the number of bits per second that are received on the input client port |
| 1.3.6.1.4.1.20044.12.9.2.1088.1.3 | Columnpm1001pcMonupRmonBitsCntSErrorPortn | read-only | current | Input Bits rate error :This OID when set indicates the input Bits rate value is invalid on client port |
| 1.3.6.1.4.1.20044.12.9.2.1088.1.4 | Columnpm1001pcMonupRmonBitsCntSOverloadPortn | read-only | current | Input Bits rate overload :This OID when set indicates an input Bits rate overload on client port |
| 1.3.6.1.4.1.20044.12.9.2.1120 | Tablepm1001pcMondwRmonByteCntSTable | not-accessible | current | List of pm1001pcMondwRmonByteCntS Article |
| 1.3.6.1.4.1.20044.12.9.2.1120.1 | Rowpm1001pcMondwRmonByteCntSEntry | not-accessible | current | Row definition for the pm1001pcMondwRmonByteCntS table |
| 1.3.6.1.4.1.20044.12.9.2.1120.1.1 | Columnpm1001pcMondwRmonByteCntSIndex | read-only | current | Index definition for the pm1001pcMondwRmonByteCntS table |
| 1.3.6.1.4.1.20044.12.9.2.1120.1.2 | Columnpm1001pcMondwRmonByteCntSValuePortn | read-only | current | Client Output Bytes Rate (/s) :This rate indicates the number of bytes per second that are transmitted on the client port |
| 1.3.6.1.4.1.20044.12.9.2.1120.1.3 | Columnpm1001pcMondwRmonByteCntSErrorPortn | read-only | current | Output Bytes rate error :This OID when set indicates the output Bytes rate value is invalid on client port |
| 1.3.6.1.4.1.20044.12.9.2.1120.1.4 | Columnpm1001pcMondwRmonByteCntSOverloadPortn | read-only | current | Output Bytes rate overload :This OID when set indicates an output Bytes rate overload on client port |
| 1.3.6.1.4.1.20044.12.9.2.1128 | Tablepm1001pcMondwRmonCrcErrorCntSTable | not-accessible | current | List of pm1001pcMondwRmonCrcErrorCntS Article |
| 1.3.6.1.4.1.20044.12.9.2.1128.1 | Rowpm1001pcMondwRmonCrcErrorCntSEntry | not-accessible | current | Row definition for the pm1001pcMondwRmonCrcErrorCntS table |
| 1.3.6.1.4.1.20044.12.9.2.1128.1.1 | Columnpm1001pcMondwRmonCrcErrorCntSIndex | read-only | current | Index definition for the pm1001pcMondwRmonCrcErrorCntS table |
| 1.3.6.1.4.1.20044.12.9.2.1128.1.2 | Columnpm1001pcMondwRmonCrcErrorCntSValuePortn | read-only | current | Client Output CRC Errors Rate (/s) :This rate indicates the number of CRC errors per second that are detected on the output client port |
| 1.3.6.1.4.1.20044.12.9.2.1128.1.3 | Columnpm1001pcMondwRmonCrcErrorCntSErrorPortn | read-only | current | Output CRC Errors rate error :This OID when set indicates the output CRC Errors rate value is invalid on client port |
| 1.3.6.1.4.1.20044.12.9.2.1128.1.4 | Columnpm1001pcMondwRmonCrcErrorCntSOverloadPortn | read-only | current | Output CRC Errors rate overload :This OID when set indicates an output CRC Errors rate overload on client port |
| 1.3.6.1.4.1.20044.12.9.2.1136 | Tablepm1001pcMondwRmonPacketsCntSTable | not-accessible | current | List of pm1001pcMondwRmonPacketsCntS Article |
| 1.3.6.1.4.1.20044.12.9.2.1136.1 | Rowpm1001pcMondwRmonPacketsCntSEntry | not-accessible | current | Row definition for the pm1001pcMondwRmonPacketsCntS table |
| 1.3.6.1.4.1.20044.12.9.2.1136.1.1 | Columnpm1001pcMondwRmonPacketsCntSIndex | read-only | current | Index definition for the pm1001pcMondwRmonPacketsCntS table |
| 1.3.6.1.4.1.20044.12.9.2.1136.1.2 | Columnpm1001pcMondwRmonPacketsCntSValuePortn | read-only | current | Client Output Packets Rate (/s) :This rate indicates the number of packets per second that are transmitted on the client port |
| 1.3.6.1.4.1.20044.12.9.2.1136.1.3 | Columnpm1001pcMondwRmonPacketsCntSErrorPortn | read-only | current | Output Packets rate error :This OID when set indicates the output Packets rate value is invalid on client port |
| 1.3.6.1.4.1.20044.12.9.2.1136.1.4 | Columnpm1001pcMondwRmonPacketsCntSOverloadPortn | read-only | current | Output Packets rate overload :This OID when set indicates an output Packets rate overload on client port |
| 1.3.6.1.4.1.20044.12.9.2.1144 | Tablepm1001pcMondwRmonBroadcastCntSTable | not-accessible | current | List of pm1001pcMondwRmonBroadcastCntS Article |
| 1.3.6.1.4.1.20044.12.9.2.1144.1 | Rowpm1001pcMondwRmonBroadcastCntSEntry | not-accessible | current | Row definition for the pm1001pcMondwRmonBroadcastCntS table |
| 1.3.6.1.4.1.20044.12.9.2.1144.1.1 | Columnpm1001pcMondwRmonBroadcastCntSIndex | read-only | current | Index definition for the pm1001pcMondwRmonBroadcastCntS table |
| 1.3.6.1.4.1.20044.12.9.2.1144.1.2 | Columnpm1001pcMondwRmonBroadcastCntSValuePortn | read-only | current | Client Output Broadcast Packets Rate (/s) :This rate indicates the number of broadcast packets per second that are transmitted on the client port |
| 1.3.6.1.4.1.20044.12.9.2.1144.1.3 | Columnpm1001pcMondwRmonBroadcastCntSErrorPortn | read-only | current | Output Broadcast rate error :This OID when set indicates the output Broadcast rate value is invalid on client port |
| 1.3.6.1.4.1.20044.12.9.2.1144.1.4 | Columnpm1001pcMondwRmonBroadcastCntSOverloadPortn | read-only | current | Output Broadcast rate overload :This OID when set indicates an output Broadcast rate overload on client port |
| 1.3.6.1.4.1.20044.12.9.2.1152 | Tablepm1001pcMondwRmonMulticastCntSTable | not-accessible | current | List of pm1001pcMondwRmonMulticastCntS Article |
| 1.3.6.1.4.1.20044.12.9.2.1152.1 | Rowpm1001pcMondwRmonMulticastCntSEntry | not-accessible | current | Row definition for the pm1001pcMondwRmonMulticastCntS table |
| 1.3.6.1.4.1.20044.12.9.2.1152.1.1 | Columnpm1001pcMondwRmonMulticastCntSIndex | read-only | current | Index definition for the pm1001pcMondwRmonMulticastCntS table |
| 1.3.6.1.4.1.20044.12.9.2.1152.1.2 | Columnpm1001pcMondwRmonMulticastCntSValuePortn | read-only | current | Client Output Multicast Packets Rate (/s) :This rate indicates the number of multicast packets per second that are transmitted on the client port |
| 1.3.6.1.4.1.20044.12.9.2.1152.1.3 | Columnpm1001pcMondwRmonMulticastCntSErrorPortn | read-only | current | Output Multicast rate error :This OID when set indicates the output Multicast rate value is invalid on client port |
| 1.3.6.1.4.1.20044.12.9.2.1152.1.4 | Columnpm1001pcMondwRmonMulticastCntSOverloadPortn | read-only | current | Output Multicast rate overload :This OID when set indicates an output Multicast rate overload on client port |
| 1.3.6.1.4.1.20044.12.9.2.1160 | Tablepm1001pcMondwRmonPauseFrameCntSTable | not-accessible | current | List of pm1001pcMondwRmonPauseFrameCntS Article |
| 1.3.6.1.4.1.20044.12.9.2.1160.1 | Rowpm1001pcMondwRmonPauseFrameCntSEntry | not-accessible | current | Row definition for the pm1001pcMondwRmonPauseFrameCntS table |
| 1.3.6.1.4.1.20044.12.9.2.1160.1.1 | Columnpm1001pcMondwRmonPauseFrameCntSIndex | read-only | current | Index definition for the pm1001pcMondwRmonPauseFrameCntS table |
| 1.3.6.1.4.1.20044.12.9.2.1160.1.2 | Columnpm1001pcMondwRmonPauseFrameCntSValuePortn | read-only | current | Client Output Pause Frames Rate (/s) :This rate indicates the number of Pause frames per second that are generated by the PM on the client port |
| 1.3.6.1.4.1.20044.12.9.2.1160.1.3 | Columnpm1001pcMondwRmonPauseFrameCntSErrorPortn | read-only | current | Output Pause rate error :This OID when set indicates the output Pause rate value is invalid on client port |
| 1.3.6.1.4.1.20044.12.9.2.1160.1.4 | Columnpm1001pcMondwRmonPauseFrameCntSOverloadPortn | read-only | current | Output Pause rate overload :This OID when set indicates an output Pause rate overload on client port |
| 1.3.6.1.4.1.20044.12.9.2.1176 | Tablepm1001pcMondwRmonBitsCntSTable | not-accessible | current | List of pm1001pcMondwRmonBitsCntS Article |
| 1.3.6.1.4.1.20044.12.9.2.1176.1 | Rowpm1001pcMondwRmonBitsCntSEntry | not-accessible | current | Row definition for the pm1001pcMondwRmonBitsCntS table |
| 1.3.6.1.4.1.20044.12.9.2.1176.1.1 | Columnpm1001pcMondwRmonBitsCntSIndex | read-only | current | Index definition for the pm1001pcMondwRmonBitsCntS table |
| 1.3.6.1.4.1.20044.12.9.2.1176.1.2 | Columnpm1001pcMondwRmonBitsCntSValuePortn | read-only | current | Client Output Bits Rate (/s) :This rate indicates the number of bits per second that are transmitted by the PM on the client port |
| 1.3.6.1.4.1.20044.12.9.2.1176.1.3 | Columnpm1001pcMondwRmonBitsCntSErrorPortn | read-only | current | Output Bits rate error :This OID when set indicates the output Bits rate value is invalid on client port |
| 1.3.6.1.4.1.20044.12.9.2.1176.1.4 | Columnpm1001pcMondwRmonBitsCntSOverloadPortn | read-only | current | Output Bits rate overload :This OID when set indicates an output Bits rate overload on client port |
| 1.3.6.1.4.1.20044.12.9.3 | Nodepm1001pcRmonLine | |||
| 1.3.6.1.4.1.20044.12.10 | Nodepm1001pcConfig | |||
| 1.3.6.1.4.1.20044.12.10.1 | Nodepm1001pcCfgAccessCAisCsf | |||
| 1.3.6.1.4.1.20044.12.10.1.1 | Tablepm1001pcCfgClientcaiscsfTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.12.10.1.1.1 | Rowpm1001pcCfgClientcaiscsfEntry | not-accessible | current | Row definition for the accessCAisCsf table |
| 1.3.6.1.4.1.20044.12.10.1.1.1.1 | Columnpm1001pcCfgClientcaiscsfIndex | read-only | current | Index definition for the clientcaiscsf table |
| 1.3.6.1.4.1.20044.12.10.1.1.1.3 | Columnpm1001pcCfgCAisModePortn | read-write | current | CAIS mode on Client Port :This register enables/disables port laser shutdown on CAIS insertion condition |
| 1.3.6.1.4.1.20044.12.10.1.1.1.9 | Columnpm1001pcCfgUpAccessioAlmPortn | read-write | current | CSF contributors on Client Port :This register configures the contributors to upstream CSF insertion on the port. |
| 1.3.6.1.4.1.20044.12.10.1.1.1.10 | Columnpm1001pcCfgUpMapperDeAlmPortn | read-write | current | CSF contributors on Client Port :This register configures the contributors to upstream CSF insertion on the port. |
| 1.3.6.1.4.1.20044.12.10.1.1.1.17 | Columnpm1001pcCfgDownAccessioAlmPortn | read-write | current | CAIS contributors on Client Port :This register configures the contributors to downstream CAIS insertion on port. |
| 1.3.6.1.4.1.20044.12.10.1.1.1.18 | Columnpm1001pcCfgDownMapperDeAlmPortn | read-write | current | CAIS contributors on Client Port :This register configures the contributors to downstream CAIS insertion on port. |
| 1.3.6.1.4.1.20044.12.10.1.1.1.19 | Columnpm1001pcCfgDownDfrmAlmPortn | read-write | current | CAIS contributors on Client Port :This register configures the contributors to downstream CAIS insertion on port. |
| 1.3.6.1.4.1.20044.12.10.1.1.1.20 | Columnpm1001pcCfgDownLineSyncAlarmsPortn | read-write | deprecated | CAIS contributors on Client Port :This register configures the contributors to downstream CAIS insertion on port. |
| 1.3.6.1.4.1.20044.12.10.2 | Nodepm1001pcCfgStartup | |||
| 1.3.6.1.4.1.20044.12.10.2.1 | Tablepm1001pcCfgClientStartupTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.12.10.2.1.1 | Rowpm1001pcCfgClientStartupEntry | not-accessible | current | Row definition for the startup table |
| 1.3.6.1.4.1.20044.12.10.2.1.1.1 | Columnpm1001pcCfgClientStartupIndex | read-only | current | Index definition for the clientStartup table |
| 1.3.6.1.4.1.20044.12.10.2.1.1.3 | Columnpm1001pcCfgSystConfPortPortn | read-write | current | Default Settings on Client Port :This register configures the default initialisation settings on the port. |
| 1.3.6.1.4.1.20044.12.10.2.1.1.4 | Columnpm1001pcCfgNetConfPortPortn | read-write | current | Default Protocol on Client Port :This register configures the default initialisation protocol on the port. |
| 1.3.6.1.4.1.20044.12.10.2.1.1.5 | Columnpm1001pcCfgFiberLengthPortn | read-write | current | Default Fiber Length on Port :This register configures the default initialisation of the fiber length on the port. |
| 1.3.6.1.4.1.20044.12.10.2.2 | Nodepm1001pctablelineStartup | |||
| 1.3.6.1.4.1.20044.12.10.2.2.2 | Scalarpm1001pcCfgsynthTransLine | read-write | current | Default Settings on Line 1 :This register configures the default initialisation settings on Line port 1. |
| 1.3.6.1.4.1.20044.12.10.2.2.5 | Scalarpm1001pcCfglineOptions1 | read-write | current | Default Options on Active Line Port :This register configures the default options on the active line port |
| 1.3.6.1.4.1.20044.12.10.2.3 | Tablepm1001pcCfgXfpTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.12.10.2.3.1 | Rowpm1001pcCfgXfpEntry | not-accessible | current | Row definition for the startup table |
| 1.3.6.1.4.1.20044.12.10.2.3.1.1 | Columnpm1001pcCfgXfpIndex | read-only | current | Index definition for the xfp table |
| 1.3.6.1.4.1.20044.12.10.2.3.1.3 | Columnpm1001pcCfgSystConfXfpPortn | read-write | current | Default settings on XFP Port :This register configures the default initialisation settings on XFP port. |
| 1.3.6.1.4.1.20044.12.10.2.3.1.4 | Columnpm1001pcCfgDataRateConfXfpPortn | read-write | deprecated | :Reserved |
| 1.3.6.1.4.1.20044.12.10.3 | Nodepm1001pcCfgLabels | |||
| 1.3.6.1.4.1.20044.12.10.3.1 | Tablepm1001pcCfgLabelclientTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.12.10.3.1.1 | Rowpm1001pcCfgLabelclientEntry | not-accessible | current | Row definition for the labels table |
| 1.3.6.1.4.1.20044.12.10.3.1.1.1 | Columnpm1001pcCfgLabelclientIndex | read-only | current | Index definition for the labelclient table |
| 1.3.6.1.4.1.20044.12.10.3.1.1.3 | Columnpm1001pcCfgLabelclientPortn | read-write | current | Default settings on the label of the Ports :These registers configures the default initialisation settings of the labels of the ports. |
| 1.3.6.1.4.1.20044.12.10.3.2 | Tablepm1001pcCfgLabellineTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.12.10.3.2.1 | Rowpm1001pcCfgLabellineEntry | not-accessible | current | Row definition for the labels table |
| 1.3.6.1.4.1.20044.12.10.3.2.1.1 | Columnpm1001pcCfgLabellineIndex | read-only | current | Index definition for the labelline table |
| 1.3.6.1.4.1.20044.12.10.3.2.1.3 | Columnpm1001pcCfgLabellinePortn | read-write | current | Default settings on the label of the lines :These registers configures the default initialisation settings of the labels of the lines. |
| 1.3.6.1.4.1.20044.12.10.257 | Scalarpm1001pcCfgWriteConfiguration | read-write | current | Write configuration to module:This OID writes the complete configuration to the module |
| 1.3.6.1.4.1.20044.12.11 | Nodepm1001pctraps | |||
| 1.3.6.1.4.1.20044.12.11.1 | Scalarpm1001pctrapBoardNumber | read-only | current | Last module which generates a trap |
| 1.3.6.1.4.1.20044.12.11.30 | Notificationpm1001pcLineTrapNotUrgentGoesOn | current | Not urgent Line default is activated | |
| 1.3.6.1.4.1.20044.12.11.31 | Notificationpm1001pcLineTrapNotUrgentGoesOff | current | Not urgent Line default disappeared | |
| 1.3.6.1.4.1.20044.12.11.32 | Notificationpm1001pcLineTrapUrgentGoesOn | current | Urgent Line default is activated | |
| 1.3.6.1.4.1.20044.12.11.33 | Notificationpm1001pcLineTrapUrgentGoesOff | current | Urgent Line default disappeared | |
| 1.3.6.1.4.1.20044.12.11.34 | Notificationpm1001pcLineTrapCritGoesOn | current | Critical Line default is activated | |
| 1.3.6.1.4.1.20044.12.11.35 | Notificationpm1001pcLineTrapCritGoesOff | current | Critical Line default disappeared | |
| 1.3.6.1.4.1.20044.12.11.40 | Notificationpm1001pcClientTrapNotUrgentGoesOn | current | Not urgent client default is activated | |
| 1.3.6.1.4.1.20044.12.11.41 | Notificationpm1001pcClientTrapNotUrgentGoesOff | current | Not urgent client default disappeared | |
| 1.3.6.1.4.1.20044.12.11.42 | Notificationpm1001pcClientTrapUrgentGoesOn | current | Urgent client default is activated | |
| 1.3.6.1.4.1.20044.12.11.43 | Notificationpm1001pcClientTrapUrgentGoesOff | current | Urgent client default disappeared | |
| 1.3.6.1.4.1.20044.12.11.44 | Notificationpm1001pcClientTrapCritGoesOn | current | Critical client default is activated | |
| 1.3.6.1.4.1.20044.12.11.45 | Notificationpm1001pcClientTrapCritGoesOff | current | Critical client default disappeared | |
| 1.3.6.1.4.1.20044.12.11.50 | Notificationpm1001pcPowerTrapUrgentGoesOn | current | Urgent power supply default is activated | |
| 1.3.6.1.4.1.20044.12.11.51 | Notificationpm1001pcPowerTrapUrgentGoesOff | current | Urgent power supply default disappeared |