MIB Viewer

EKINOPS-PMC2002-MIB

934 objects
MIB for managing Ekinops modules with PMC2002 software
OIDNameAccessStatusDescription
1.3.6.1.4.1.20044.52Identitymodulepmc2002MIB for managing Ekinops modules with PMC2002 software
1.3.6.1.4.1.20044.52.2Nodepmc2002alarms
1.3.6.1.4.1.20044.52.2.1Nodepmc2002AlmOther
1.3.6.1.4.1.20044.52.2.1.1Nodepmc2002AlmOtherNurg
1.3.6.1.4.1.20044.52.2.1.1.2Nodepmc2002AlmsynthAlm2
1.3.6.1.4.1.20044.52.2.1.1.2.1Scalarpmc2002AlmConfTableSaveread-onlycurrentPM Configuration Save :This OID is at 1 during the saving of a new configuration table in the module Flash memory. <Condtype> CONF_TABLE_SAVE <Probcause> other…
1.3.6.1.4.1.20044.52.2.1.1.2.2Scalarpmc2002AlmInvUploadread-onlycurrentInventory Upload :This OID is at 1 during the uploading of PM inventory information. <Condtype> INV_UPLOAD <Probcause> other (1) <Alarmtype> other (1) <Polarit…
1.3.6.1.4.1.20044.52.2.1.1.2.3Scalarpmc2002AlmConfTableLoadread-onlycurrentPM Configuration Load :This OID is at 1 during the loading of configuration tables in the modules RAM. <Condtype> CONF_TABLE_LOAD <Probcause> other (1) <Alarmt…
1.3.6.1.4.1.20044.52.2.1.1.2.4Scalarpmc2002AlmCorrelatOffread-onlycurrentNot Used :This OID, when set, indicates that alarm correlation is not being performed. <Condtype> CORRELAT_OFF <Probcause> other (1) <Alarmtype> other (1) <Pol…
1.3.6.1.4.1.20044.52.2.1.1.2.5Scalarpmc2002AlmMaintenanceOnread-onlycurrentMaintenance Mode :This OID indicates that the PM is in maintenance mode. <Help> This alarm indicates that the maintenance mode is enabled on the PM <Condtype> …
1.3.6.1.4.1.20044.52.2.1.2Nodepmc2002AlmOtherUrg
1.3.6.1.4.1.20044.52.2.1.2.194Nodepmc2002AlmmodInitFailLevel2
1.3.6.1.4.1.20044.52.2.1.2.194.1Scalarpmc2002AlmLedFailread-onlycurrentLed Fail :This OID indicates that Led register has not been correctly initalized <Help> This alarm indicates if the module LEDs are correctly initialized <Cond…
1.3.6.1.4.1.20044.52.2.1.2.194.2Scalarpmc2002AlmNextColdBootForcedread-onlycurrentNext Cold Boot Forced :This OID indicates that the next Reset will be forced Cold <Help> This alarm indicates that the next reset of the module will be forced …
1.3.6.1.4.1.20044.52.2.1.2.194.3Scalarpmc2002AlmBootUndoneread-onlycurrentBoot Undone :This OID indicates that the boot has not been correctly achieved <Help> This alarm indicates if the module has correctly boot <Condtype> BOOT_UNDO…
1.3.6.1.4.1.20044.52.2.1.2.194.4Scalarpmc2002AlmResetHwInitFailread-onlycurrentReset HW Init Fail :This OID indicates that the HW intialization has caused unknown intial conditions <Help> This alarm indicates if the HW has been correctly …
1.3.6.1.4.1.20044.52.2.1.2.194.5Scalarpmc2002AlmSwInitFailread-onlycurrentSW Init Fail :This OID indicates that the SW intialization has caused unknown intial conditions <Help> This alarm indicates if the SW module is correctly initi…
1.3.6.1.4.1.20044.52.2.1.2.195Nodepmc2002AlmmodInitFailLevel3
1.3.6.1.4.1.20044.52.2.1.2.195.1Scalarpmc2002AlmGwIdentFailread-onlycurrentGW Ident Fail :This OID indicates that GW identification has not been read <Help> This alarm indicates if the GW has been correctly identified <Condtype> GW_ID…
1.3.6.1.4.1.20044.52.2.1.2.195.2Scalarpmc2002AlmObmTypeReadFailread-onlycurrentOBM Type Read Fail :This OID indicates that OBM type has not been recognized <Help> This alarm indicates if the OBM board has been correctly identified <Condty…
1.3.6.1.4.1.20044.52.2.1.2.195.3Scalarpmc2002AlmInitModuleFailread-onlycurrentInit Module Fail :This OID indicates that the Module has not been correctly initialized <Help> This alarm indicates if the SW module is correctly initialized <…
1.3.6.1.4.1.20044.52.2.1.2.195.5Scalarpmc2002AlmXfp1InitFailread-onlycurrentXFP1 Init Fail :This OID indicates that the XFP has not been correctly initialized <Help> This alarm indicates if the line transceiver 1 is correctly initializ…
1.3.6.1.4.1.20044.52.2.1.2.195.6Scalarpmc2002AlmXfp2InitFailread-onlycurrentXFP2 Init Fail :This OID indicates that the XFP has not been correctly initialized <Help> This alarm indicates if the line transceiver 2 is correctly initializ…
1.3.6.1.4.1.20044.52.2.1.2.195.7Scalarpmc2002AlmLine1InitFailread-onlycurrentSubcarrier1 Init Fail :This OID indicates that the Line registersvsubset has not been correctly initialized <Help> This alarm indicates if the line port is cor…
1.3.6.1.4.1.20044.52.2.1.2.195.9Scalarpmc2002AlmClient1InitFailread-onlycurrentClient1 Init Fail :This OID indicates that Client 1 registers subset has not been correctly initialized <Help> This alarm indicates if the client port is corre…
1.3.6.1.4.1.20044.52.2.1.3Nodepmc2002AlmOtherCrit
1.3.6.1.4.1.20044.52.2.1.3.0Nodepmc2002AlmsynthAlm0
1.3.6.1.4.1.20044.52.2.1.3.0.1Scalarpmc2002AlmLineFailSynthread-onlycurrent20G Line Port Failure :This OID indicates a failure on the 20G line port <Condtype> LINE_FAIL_SYNTH <Probcause> equipmentMalfunction (16) <Alarmtype> equipment…
1.3.6.1.4.1.20044.52.2.1.3.0.2Scalarpmc2002AlmLineLosSynthread-onlycurrent20G Line Input Loss Of Signal :This OID indicates a loss of signal on the 20 Gb/s input. <Help> This alarm indicates if an optical signal is detected on the li…
1.3.6.1.4.1.20044.52.2.1.3.0.9Scalarpmc2002AlmModGlobFailread-onlycurrentModule Failure :This OID is set on detection of a failure originating from the PM <Condtype> MOD_GLOB_FAIL <Probcause> equipmentMalfunction (16) <Alarmtype> sy…
1.3.6.1.4.1.20044.52.2.1.3.0.15Scalarpmc2002AlmDefFuseAread-onlycurrentFuse A Fail :This OID indicates that the fuse of the power input A is in fail condition <Help> Status of the Fuse A <Condtype> DEF_FUSE_A <Probcause> powerProb…
1.3.6.1.4.1.20044.52.2.1.3.0.16Scalarpmc2002AlmDefFuseBread-onlycurrentFuse B Fail :This OID indicates that the fuse of the power input B is in fail condition <Help> Status of the Fuse B <Condtype> DEF_FUSE_B <Probcause> powerProb…
1.3.6.1.4.1.20044.52.2.2Nodepmc2002AlmClient
1.3.6.1.4.1.20044.52.2.2.1Nodepmc2002AlmClientNurg
1.3.6.1.4.1.20044.52.2.2.1.48Tablepmc2002AlmclientXfpWarningsTablenot-accessiblecurrentList of pmc2002AlmclientXfpWarnings Article
1.3.6.1.4.1.20044.52.2.2.1.48.1Rowpmc2002AlmclientXfpWarningsEntrynot-accessiblecurrentRow definition for the pmc2002AlmclientXfpWarnings table
1.3.6.1.4.1.20044.52.2.2.1.48.1.1Columnpmc2002AlmclientXfpWarningsIndexread-onlycurrentIndex definition for the pmc2002AlmclientXfpWarnings table
1.3.6.1.4.1.20044.52.2.2.1.48.1.2Columnpmc2002AlmClientTxPowerLowWarningPortnread-onlycurrentClient Optical Tx Pwr Low Warning :Warning indicating that the XFP/OTX transmitter transmitter output power is lower than the threshold value written in the XF…
1.3.6.1.4.1.20044.52.2.2.1.48.1.3Columnpmc2002AlmClientTxPowerHighWarningPortnread-onlycurrentClient Optical Tx Pwr High Warning :Warning indicating that the XFP/OTX transmitter transmitter output power is higher than the threshold value written in the …
1.3.6.1.4.1.20044.52.2.2.1.48.1.4Columnpmc2002AlmClientTxBiasLowWarningPortnread-onlycurrentClient Transceiver Bias Low Warning :Warning indicating that the XFP/OTX transmitter laser bias current is lower than the threshold value written in the XFP/OT…
1.3.6.1.4.1.20044.52.2.2.1.48.1.5Columnpmc2002AlmClientTxBiasHighWarningPortnread-onlycurrentClient Transceiver Bias High Warning :Warning indicating that the XFP/OTX transmitter laser bias current is higher than the threshold value written in the XFP …
1.3.6.1.4.1.20044.52.2.2.1.48.1.8Columnpmc2002AlmClientTempLowWarningPortnread-onlycurrentClient Transceiver Temp Low Warning :Warning indicating that the XFP/OTX temperature is lower than the threshold value written in the XFP/OTX EEPROM <Condtype>…
1.3.6.1.4.1.20044.52.2.2.1.48.1.9Columnpmc2002AlmClientTempHighWarningPortnread-onlycurrentClient Transceiver Temp High Warning :Warning indicating that the XFP/OTX temperature is higher than the threshold value written in the XFP EEPROM <Condtype> C…
1.3.6.1.4.1.20044.52.2.2.1.48.1.16Columnpmc2002AlmClientRxPowerLowWarningPortnread-onlycurrentClient Optical Rx Pwr Low Warning :Warning indicating that the XFP received optical power is lower than the threshold value written in the XFP EEPROM <Condtype…
1.3.6.1.4.1.20044.52.2.2.1.48.1.17Columnpmc2002AlmClientRxPowerHighWarningPortnread-onlycurrentClient Optical Rx Pwr High Warning :Warning indicating that the XFP received optical power is higher than the threshold value written in the XFP EEPROM <Condty…
1.3.6.1.4.1.20044.52.2.2.2Nodepmc2002AlmClientUrg
1.3.6.1.4.1.20044.52.2.2.2.32Tablepmc2002AlmclientXfpAlarm1Tablenot-accessiblecurrentList of pmc2002AlmclientXfpAlarm1 Article
1.3.6.1.4.1.20044.52.2.2.2.32.1Rowpmc2002AlmclientXfpAlarm1Entrynot-accessiblecurrentRow definition for the pmc2002AlmclientXfpAlarm1 table
1.3.6.1.4.1.20044.52.2.2.2.32.1.1Columnpmc2002AlmclientXfpAlarm1Indexread-onlycurrentIndex definition for the pmc2002AlmclientXfpAlarm1 table
1.3.6.1.4.1.20044.52.2.2.2.32.1.2Columnpmc2002AlmClientTxPowerLowAlarmPortnread-onlycurrentClient Optical Tx Power Low :Alarm indicating that the XFP/OTX transmitter transmitter output power is lower than the threshold value written in the XFP/OTX EE…
1.3.6.1.4.1.20044.52.2.2.2.32.1.3Columnpmc2002AlmClientTxPowerHighAlarmPortnread-onlycurrentClient Optical Tx Power High :Alarm indicating that the XFP/OTX transmitter transmitter output power is higher than the threshold value written in the XFP EEPR…
1.3.6.1.4.1.20044.52.2.2.2.32.1.4Columnpmc2002AlmClientTxBiasLowAlarmPortnread-onlycurrentClient Transceiver Bias Low :Alarm indicating that the XFP/OTX transmitter laser bias current is lower than the threshold value written in the XFP/OTX EEPROM <…
1.3.6.1.4.1.20044.52.2.2.2.32.1.5Columnpmc2002AlmClientTxBiasHighAlarmPortnread-onlycurrentClient Transceiver Bias High :Alarm indicating that the XFP/OTX transmitter laser bias current is higher than the threshold value written in the XFP EEPROM <Co…
1.3.6.1.4.1.20044.52.2.2.2.32.1.8Columnpmc2002AlmClientTempLowAlarmPortnread-onlycurrentClient Transceiver Temp Low :Alarm indicating that the XFP/OTX temperature is lower than the threshold value written in the XFP/OTX EEPROM <Condtype> CLIENT_TE…
1.3.6.1.4.1.20044.52.2.2.2.32.1.9Columnpmc2002AlmClientTempHighAlarmPortnread-onlycurrentClient Transceiver Temp High :Alarm indicating that the XFP/OTX temperature is higher than the threshold value written in the XFP EEPROM <Condtype> CLIENT_TEMP…
1.3.6.1.4.1.20044.52.2.2.2.32.1.16Columnpmc2002AlmClientRxPowerLowAlarmPortnread-onlycurrentClient Optical Rx Power Low :Alarm indicating that the XFP received optical power is lower than the threshold value written in the XFP EEPROM <Condtype> CLIENT…
1.3.6.1.4.1.20044.52.2.2.2.32.1.17Columnpmc2002AlmClientRxPowerHighAlarmPortnread-onlycurrentClient Optical Rx Power High :Alarm indicating that the XFP received optical power is higher than the threshold value written in the XFP EEPROM <Condtype> CLIE…
1.3.6.1.4.1.20044.52.2.2.2.64Tablepmc2002AlmclientXfpSupplyAlarmTablenot-accessiblecurrentList of pmc2002AlmclientXfpSupplyAlarm Article
1.3.6.1.4.1.20044.52.2.2.2.64.1Rowpmc2002AlmclientXfpSupplyAlarmEntrynot-accessiblecurrentRow definition for the pmc2002AlmclientXfpSupplyAlarm table
1.3.6.1.4.1.20044.52.2.2.2.64.1.1Columnpmc2002AlmclientXfpSupplyAlarmIndexread-onlycurrentIndex definition for the pmc2002AlmclientXfpSupplyAlarm table
1.3.6.1.4.1.20044.52.2.2.2.64.1.2Columnpmc2002AlmClientVee5LowAlarmPortnread-onlycurrentVEE5 Power Supply Low :Alarm indicating the XFP/OTX VEE5 power supply is lower than the threshold written in the EEPROM <Condtype> CLIENT_VEE5_LOW_ALARM <Probc…
1.3.6.1.4.1.20044.52.2.2.2.64.1.3Columnpmc2002AlmClientVee5HighAlarmPortnread-onlycurrentVEE5 Power Supply High :Alarm indicating the XFP/OTX VEE5 power supply is higher than the threshold written in the EEPROM <Condtype> CLIENT_VEE5_HIGH_ALARM <Pr…
1.3.6.1.4.1.20044.52.2.2.2.64.1.4Columnpmc2002AlmClientVcc2LowAlarmPortnread-onlycurrentVCC2 Power Supply Low :Alarm indicating the XFP/OTX VCC2 power supply is lower than the threshold written in the EEPROM <Condtype> CLIENT_VCC2_LOW_ALARM <Probc…
1.3.6.1.4.1.20044.52.2.2.2.64.1.5Columnpmc2002AlmClientVcc2HighAlarmPortnread-onlycurrentVCC2 Power Supply High :Alarm indicating the XFP/OTX VCC2 power supply is higher than the threshold written in the EEPROM <Condtype> CLIENT_VCC2_HIGH_ALARM <Pr…
1.3.6.1.4.1.20044.52.2.2.2.64.1.6Columnpmc2002AlmClientVcc3LowAlarmPortnread-onlycurrentVCC3 Power Supply Low :Alarm indicating the XFP/OTX VCC3 power supply is lower than the threshold written in the EEPROM <Condtype> CLIENT_VCC3_LOW_ALARM <Probc…
1.3.6.1.4.1.20044.52.2.2.2.64.1.7Columnpmc2002AlmClientVcc3HighAlarmPortnread-onlycurrentVCC3 Power Supply High :Alarm indicating the XFP/OTX VCC3 power supply is higher than the threshold written in the EEPROM <Condtype> CLIENT_VCC3_HIGH_ALARM <Pr…
1.3.6.1.4.1.20044.52.2.2.2.64.1.8Columnpmc2002AlmClientVcc5LowAlarmPortnread-onlycurrentVCC5 Power Supply Low :Alarm indicating the XFP/OTX VCC5 power supply is lower than the threshold written in the EEPROM <Condtype> CLIENT_VCC5_LOW_ALARM <Probc…
1.3.6.1.4.1.20044.52.2.2.2.64.1.9Columnpmc2002AlmClientVcc5HighAlarmPortnread-onlycurrentVCC5 Power Supply High :Alarm indicating the XFP/OTX VCC5 power supply is higher than the threshold written in the EEPROM <Condtype> CLIENT_VCC5_HIGH_ALARM <Pr…
1.3.6.1.4.1.20044.52.2.2.2.64.1.10Columnpmc2002AlmClientVee5LowWarningPortnread-onlycurrentVEE5 Power Supply Low Warning :Warning indicating the XFP/OTX VEE5 power supply is lower than the threshold written in the EEPROM <Condtype> CLIENT_VEE5_LOW_WA…
1.3.6.1.4.1.20044.52.2.2.2.64.1.11Columnpmc2002AlmClientVee5HighWarningPortnread-onlycurrentVEE5 Power Supply High Warning :Warning indicating the XFP/OTX VEE5 power supply is higher than the threshold written in the EEPROM <Condtype> CLIENT_VEE5_HIGH…
1.3.6.1.4.1.20044.52.2.2.2.64.1.12Columnpmc2002AlmClientVcc2LowWarningPortnread-onlycurrentVCC2 Power Supply Low Warning :Warning indicating the XFP/OTX VCC2 power supply is lower than the threshold written in the EEPROM <Condtype> CLIENT_VCC2_LOW_WA…
1.3.6.1.4.1.20044.52.2.2.2.64.1.13Columnpmc2002AlmClientVcc2HighWarningPortnread-onlycurrentVCC2 Power Supply High Warning :Warning indicating the XFP/OTX VCC2 power supply is higher than the threshold written in the EEPROM <Condtype> CLIENT_VCC2_HIGH…
1.3.6.1.4.1.20044.52.2.2.2.64.1.14Columnpmc2002AlmClientVcc3LowWarningPortnread-onlycurrentVCC3 Power Supply Low Warning :Warning indicating the XFP/OTX VCC3 power supply is lower than the threshold written in the EEPROM <Condtype> CLIENT_VCC3_LOW_WA…
1.3.6.1.4.1.20044.52.2.2.2.64.1.15Columnpmc2002AlmClientVcc3HighWarningPortnread-onlycurrentVCC3 Power Supply High Warning :Warning indicating the XFP/OTX VCC3 power supply is higher than the threshold written in the EEPROM <Condtype> CLIENT_VCC3_HIGH…
1.3.6.1.4.1.20044.52.2.2.2.64.1.16Columnpmc2002AlmClientVcc5LowWarningPortnread-onlycurrentVCC5 Power Supply Low Warning :Warning indicating the XFP/OTX VCC5 power supply is lower than the threshold written in the EEPROM <Condtype> CLIENT_VCC5_LOW_WA…
1.3.6.1.4.1.20044.52.2.2.2.64.1.17Columnpmc2002AlmClientVcc5HighWarningPortnread-onlycurrentVCC5 Power Supply High Warning :Warning indicating the XFP/OTX VCC5 power supply is higher than the threshold written in the EEPROM <Condtype> CLIENT_VCC5_HIGH…
1.3.6.1.4.1.20044.52.2.2.3Nodepmc2002AlmClientCrit
1.3.6.1.4.1.20044.52.2.2.3.8Tablepmc2002AlmsynthAlmPortTablenot-accessiblecurrentList of pmc2002AlmsynthAlmPort Article
1.3.6.1.4.1.20044.52.2.2.3.8.1Rowpmc2002AlmsynthAlmPortEntrynot-accessiblecurrentRow definition for the pmc2002AlmsynthAlmPort table
1.3.6.1.4.1.20044.52.2.2.3.8.1.1Columnpmc2002AlmsynthAlmPortIndexread-onlycurrentIndex definition for the pmc2002AlmsynthAlmPort table
1.3.6.1.4.1.20044.52.2.2.3.8.1.2Columnpmc2002AlmClientSfpAbsentPortnread-onlycurrentClient Optical Module Absent :This OID indicates that the XFP module is not present in the client port. <Help> This alarm indicates if the client transceiver i…
1.3.6.1.4.1.20044.52.2.2.3.8.1.3Columnpmc2002AlmClientDdmAbsentPortnread-onlycurrentDDM Supported On Client SFP+ :This OID indicates that the client optical interface (XFP or OTX) is not operational. <Help> This status indicates if the client …
1.3.6.1.4.1.20044.52.2.2.3.8.1.5Columnpmc2002AlmClientHwFailPortnread-onlycurrentClient HW Fail :This OID indicates a failure on client port, most probably caused by a HW issue. <Condtype> CLIENT_HW_FAIL <Probcause> equipmentMalfunction (16…
1.3.6.1.4.1.20044.52.2.2.3.8.1.6Columnpmc2002AlmClientDwLsdPortnread-onlycurrentClient SFP+ Laser Shutdown :This OID indicates the Client XFP transmitter output is ON. <Help> This status indicates if the client transceiver laser is ON or O…
1.3.6.1.4.1.20044.52.2.2.3.8.1.7Columnpmc2002AlmClientLocalOosPortnread-onlycurrentLocal Client Port In Service :This OID indicates that the local Client port is In Service (1) or Out of Service (2) <Help> This status indicates if the local c…
1.3.6.1.4.1.20044.52.2.2.3.8.1.9Columnpmc2002AlmClientDwCaisPortnread-onlycurrentClient AIS Inserted :This OID indicates a CAIS has been inserted on the output client port. <Help> This status indicates if a Client Alarm Indication Signal is…
1.3.6.1.4.1.20044.52.2.2.3.8.1.10Columnpmc2002AlmClientSfpDdmWarningPortnread-onlycurrentWarning On Client SFP+ DDM :This OID indicates a warning is being received from the Client XFP DDM <Help> This alarm indicates if a DDM Warning has been detect…
1.3.6.1.4.1.20044.52.2.2.3.8.1.11Columnpmc2002AlmClientSfpDdmAlmPortnread-onlycurrentAlarm On Client SFP+ DDM :This OID indicates an alarm is being received from the Client XFP DDM <Help> This alarm indicates if a DDM Alarm has been detected on…
1.3.6.1.4.1.20044.52.2.2.3.8.1.13Columnpmc2002AlmClientFailPortnread-onlycurrentClient Access Fail :This OID indicates a failure on the Client port <Condtype> CLIENT_FAIL <Probcause> equipmentMalfunction (16) <Alarmtype> synthesisAlarm (12…
1.3.6.1.4.1.20044.52.2.2.3.8.1.17Columnpmc2002AlmClientUpCsfPortnread-onlycurrentClient Signal Fail Inserted :This OID indicates a CSF has been inserted in the upstream client port. <Help> This status indicates if a Client Signal Fail is cu…
1.3.6.1.4.1.20044.52.2.2.3.16Tablepmc2002AlmclientAccessioAlmTablenot-accessiblecurrentList of pmc2002AlmclientAccessioAlm Article
1.3.6.1.4.1.20044.52.2.2.3.16.1Rowpmc2002AlmclientAccessioAlmEntrynot-accessiblecurrentRow definition for the pmc2002AlmclientAccessioAlm table
1.3.6.1.4.1.20044.52.2.2.3.16.1.1Columnpmc2002AlmclientAccessioAlmIndexread-onlycurrentIndex definition for the pmc2002AlmclientAccessioAlm table
1.3.6.1.4.1.20044.52.2.2.3.16.1.2Columnpmc2002AlmClientDwLasFailPortnread-onlycurrentClient XFP Tx Failed :This OID indicates that the transmitter fails for the XFP plugged into the client port (this alarm reports the transmitter failure alarm …
1.3.6.1.4.1.20044.52.2.2.3.16.1.5Columnpmc2002AlmClientUpLosPortnread-onlycurrentClient Input Loss Of Signal :This OID indicates that no signal is present on the XFP of the client port <Help> This alarm indicates if an optical signal is det…
1.3.6.1.4.1.20044.52.2.2.3.40Tablepmc2002AlmclientXfpAlarm2Tablenot-accessiblecurrentList of pmc2002AlmclientXfpAlarm2 Article
1.3.6.1.4.1.20044.52.2.2.3.40.1Rowpmc2002AlmclientXfpAlarm2Entrynot-accessiblecurrentRow definition for the pmc2002AlmclientXfpAlarm2 table
1.3.6.1.4.1.20044.52.2.2.3.40.1.1Columnpmc2002AlmclientXfpAlarm2Indexread-onlycurrentIndex definition for the pmc2002AlmclientXfpAlarm2 table
1.3.6.1.4.1.20044.52.2.2.3.40.1.3Columnpmc2002AlmClientModNrPortnread-onlycurrentClient Optical Module Not Ready :This OID indicates that the module is unable to determine correct data. <Help> This alarm indicates if the Client transceiver …
1.3.6.1.4.1.20044.52.2.2.3.40.1.4Columnpmc2002AlmClientRxCdrNotLockedPortnread-onlycurrentClient Optical Rx CDR Unlocked :This OID indicates that a loss of lock on the receiving side CDR has been detected <Help> This alarm indicates if the Rx CDR is…
1.3.6.1.4.1.20044.52.2.2.3.40.1.6Columnpmc2002AlmClientRxNrPortnread-onlycurrentClient Optical Rx Not Ready :This OID indicates that a condition has arisen leading to invalid data on the receiving side. <Help> This alarm indicates if the R…
1.3.6.1.4.1.20044.52.2.2.3.40.1.7Columnpmc2002AlmClientTxCdrNotLockedPortnread-onlycurrentClient Optical Tx CDR Unlocked :This OID indicates a loss of lock on the transmitting side CDR has been detected. <Help> This alarm indicates if the Tx CDR is …
1.3.6.1.4.1.20044.52.2.2.3.40.1.8Columnpmc2002AlmClientTxFaultPortnread-onlycurrentClient Optical Tx Failure :This OID indicates a fault condition on the laser detected by the safety syste <Help> This alarm indicates if the laser of the Clien…
1.3.6.1.4.1.20044.52.2.2.3.40.1.9Columnpmc2002AlmClientTxNrPortnread-onlycurrentClient Optical Tx Not Ready :This OID indicates a condition has arisen leading to invalid data on the transmitting side <Help> This alarm indicates if the Tx p…
1.3.6.1.4.1.20044.52.2.2.3.40.1.15Columnpmc2002AlmClientWavelengthUnlockedPortnread-onlycurrentClient Optical Tx Wavelength Unlocked :This OID indicates that the wavelength error is exceeding the manufacturer tolerance <Help> This alarm indicates if the …
1.3.6.1.4.1.20044.52.2.2.3.40.1.16Columnpmc2002AlmClientTecFaultPortnread-onlycurrentClient Optical Tx Temp Regul. Failed :This OID indicates a failure on the TEC module <Help> This alarm indicates if the TEC of the Client transceiver is in fai…
1.3.6.1.4.1.20044.52.2.2.3.40.1.17Columnpmc2002AlmClientApdSupplyFaultPortnread-onlycurrentClient Rx Photodiode Power Failed :This OID indicates a failure on the APD power supply <Help> This alarm indicates if the APD power supply is in fail conditio…
1.3.6.1.4.1.20044.52.2.2.3.72Tablepmc2002AlmclientMapperDeAlmTablenot-accessiblecurrentList of pmc2002AlmclientMapperDeAlm Article
1.3.6.1.4.1.20044.52.2.2.3.72.1Rowpmc2002AlmclientMapperDeAlmEntrynot-accessiblecurrentRow definition for the pmc2002AlmclientMapperDeAlm table
1.3.6.1.4.1.20044.52.2.2.3.72.1.1Columnpmc2002AlmclientMapperDeAlmIndexread-onlycurrentIndex definition for the pmc2002AlmclientMapperDeAlm table
1.3.6.1.4.1.20044.52.2.2.3.72.1.2Columnpmc2002AlmClientUpAccOosPortnread-onlycurrentClient Loss Of Synchronisation :This OID indicates the upstream client input port is in Loss of Synchronization <Help> This alarms indicates if the input clien…
1.3.6.1.4.1.20044.52.2.2.3.72.1.11Columnpmc2002AlmClientUpBufferOvlPortnread-onlycurrentClient Upstream Buffer Overload :This OID indicates that the rate adaptation buffer for client port is in overload. <Condtype> CLIENT_UP_BUFFER_OVL <Probcause>…
1.3.6.1.4.1.20044.52.2.2.3.72.1.12Columnpmc2002AlmClientDwCsfDetPortnread-onlycurrentClient Signal Fail Detected :This OID indicates that a CSF has been detected on client port in the downstream direction <Help> This alarm indicates if a Client…
1.3.6.1.4.1.20044.52.2.2.3.72.1.15Columnpmc2002AlmClientDwBufferOvlPortnread-onlycurrentClient Downstream Buffer Overload :This OID indicates that the de-mapper buffer for client port is in overload. <Condtype> CLIENT_DW_BUFFER_OVL <Probcause> equ…
1.3.6.1.4.1.20044.52.2.3Nodepmc2002AlmLine
1.3.6.1.4.1.20044.52.2.3.1Nodepmc2002AlmLineNurg
1.3.6.1.4.1.20044.52.2.3.1.209Tablepmc2002AlmlineXfp1WarningsTablenot-accessiblecurrentList of pmc2002AlmlineXfp1Warnings Article
1.3.6.1.4.1.20044.52.2.3.1.209.1Rowpmc2002AlmlineXfp1WarningsEntrynot-accessiblecurrentRow definition for the pmc2002AlmlineXfp1Warnings table
1.3.6.1.4.1.20044.52.2.3.1.209.1.1Columnpmc2002AlmlineXfp1WarningsIndexread-onlycurrentIndex definition for the pmc2002AlmlineXfp1Warnings table
1.3.6.1.4.1.20044.52.2.3.1.209.1.2Columnpmc2002AlmLineTxPowerLowWarningPortnread-onlycurrentSubcarrier Optical Tx Power Low Warning :Warning indicating that the XFP/OTX transmitter transmitter output power is lower than the threshold value written in …
1.3.6.1.4.1.20044.52.2.3.1.209.1.3Columnpmc2002AlmLineTxPowerHighWarningPortnread-onlycurrentSubcarrier Optical Tx Power High Warning :Warning indicating that the XFP/OTX transmitter transmitter output power is higher than the threshold value written i…
1.3.6.1.4.1.20044.52.2.3.1.209.1.4Columnpmc2002AlmLineTxBiasLowWarningPortnread-onlycurrentSubcarrier Transceiver Bias Low Warning :Warning indicating that the XFP/OTX transmitter laser bias current is lower than the threshold value written in the XF…
1.3.6.1.4.1.20044.52.2.3.1.209.1.5Columnpmc2002AlmLineTxBiasHighWarningPortnread-onlycurrentSubcarrier Transceiver Bias High Warning :Warning indicating that the XFP/OTX transmitter laser bias current is higher than the threshold value written in the …
1.3.6.1.4.1.20044.52.2.3.1.209.1.8Columnpmc2002AlmLineTempLowWarningPortnread-onlycurrentSubcarrier Transceiver Temp Low Warning :Warning indicating that the XFP/OTX temperature is lower than the threshold value written in the XFP/OTX EEPROM <Condt…
1.3.6.1.4.1.20044.52.2.3.1.209.1.9Columnpmc2002AlmLineTempHighWarningPortnread-onlycurrentSubcarrier Transceiver Temp High Warning :Warning indicating that the XFP/OTX temperature is higher than the threshold value written in the XFP EEPROM <Condtyp…
1.3.6.1.4.1.20044.52.2.3.1.209.1.16Columnpmc2002AlmLineRxPowerLowWarningPortnread-onlycurrentSubcarrier Optical Rx Power Low Warning :Warning indicating that the XFP received optical power is lower than the threshold value written in the XFP EEPROM <Co…
1.3.6.1.4.1.20044.52.2.3.1.209.1.17Columnpmc2002AlmLineRxPowerHighWarningPortnread-onlycurrentSubcarrier Optical Rx Power High Warning :Warning indicating that the XFP received optical power is higher than the threshold value written in the XFP EEPROM <…
1.3.6.1.4.1.20044.52.2.3.1.225Tablepmc2002AlmlineOtx1TlhWarningsTablenot-accessiblecurrentList of pmc2002AlmlineOtx1TlhWarnings Article
1.3.6.1.4.1.20044.52.2.3.1.225.1Rowpmc2002AlmlineOtx1TlhWarningsEntrynot-accessiblecurrentRow definition for the pmc2002AlmlineOtx1TlhWarnings table
1.3.6.1.4.1.20044.52.2.3.1.225.1.1Columnpmc2002AlmlineOtx1TlhWarningsIndexread-onlycurrentIndex definition for the pmc2002AlmlineOtx1TlhWarnings table
1.3.6.1.4.1.20044.52.2.3.1.225.1.6Columnpmc2002AlmLineModulatorAgingHighWarningPortnread-onlycurrentSubcarrier Modulator Aging High Warning :Warning indicating the Line OTX TLH modulator aging is higher than the threshold written in the EEPROM <Condtype> LINE…
1.3.6.1.4.1.20044.52.2.3.1.225.1.7Columnpmc2002AlmLineAgingHighWarningPortnread-onlycurrentSubcarrier OTX TLH Aging High Warning :Warning indicating the Line OTX TLH aging is higher than the threshold written in the EEPROM <Condtype> LINE_AGING_HIGH_…
1.3.6.1.4.1.20044.52.2.3.1.225.1.13Columnpmc2002AlmLineFreqDevHighWarningPortnread-onlycurrentSubcarrier Freq. Deviation High Warning :Warning indicating the Line OTX TLH frequency deviation is higher than the threshold written in the EEPROM <Condtype> …
1.3.6.1.4.1.20044.52.2.3.1.225.1.15Columnpmc2002AlmLineLaserTempHighWarningPortnread-onlycurrentSubcarrier Laser Temp. High Warning :Warning indicating the Line OTX TLH laser temperature is higher than the threshold written in the EEPROM <Condtype> LINE_L…
1.3.6.1.4.1.20044.52.2.3.2Nodepmc2002AlmLineUrg
1.3.6.1.4.1.20044.52.2.3.2.129Tablepmc2002AlmdfrmBerTablenot-accessiblecurrentList of pmc2002AlmdfrmBer Article
1.3.6.1.4.1.20044.52.2.3.2.129.1Rowpmc2002AlmdfrmBerEntrynot-accessiblecurrentRow definition for the pmc2002AlmdfrmBer table
1.3.6.1.4.1.20044.52.2.3.2.129.1.1Columnpmc2002AlmdfrmBerIndexread-onlycurrentIndex definition for the pmc2002AlmdfrmBer table
1.3.6.1.4.1.20044.52.2.3.2.129.1.2Columnpmc2002AlmLineSignalDegradePortnread-onlycurrentCustom Subcarrier Signal Degrade :This OID indicates that the line input signal is DEGRADE. The assertion hysteresis can customized by the host <Condtype> LINE…
1.3.6.1.4.1.20044.52.2.3.2.129.1.3Columnpmc2002AlmLineSignalFailPortnread-onlycurrentCustom Subcarrier Signal Fail :This OID indicates that the line input signal is FAIL. The assertion hysteresis can be customized by the host <Condtype> LINE_SI…
1.3.6.1.4.1.20044.52.2.3.2.129.1.6Columnpmc2002AlmLineDegradePortnread-onlycurrentFixed Subcarrier Signal Degrade :This OID indicates that the line input signal is DEGRADE. The assetion hysteresis is fixed to 10-8 (assertion) and 10-9 (de-as…
1.3.6.1.4.1.20044.52.2.3.2.208Tablepmc2002AlmlineXfp1AlarmTablenot-accessiblecurrentList of pmc2002AlmlineXfp1Alarm Article
1.3.6.1.4.1.20044.52.2.3.2.208.1Rowpmc2002AlmlineXfp1AlarmEntrynot-accessiblecurrentRow definition for the pmc2002AlmlineXfp1Alarm table
1.3.6.1.4.1.20044.52.2.3.2.208.1.1Columnpmc2002AlmlineXfp1AlarmIndexread-onlycurrentIndex definition for the pmc2002AlmlineXfp1Alarm table
1.3.6.1.4.1.20044.52.2.3.2.208.1.2Columnpmc2002AlmLineTxPowerLowAlarmPortnread-onlycurrentSubcarrier Optical Tx Power Low Alarm :Alarm indicating that the XFP/OTX transmitter transmitter output power is lower than the threshold value written in the …
1.3.6.1.4.1.20044.52.2.3.2.208.1.3Columnpmc2002AlmLineTxPowerHighAlarmPortnread-onlycurrentSubcarrier Optical Tx Power High Alarm :Alarm indicating that the XFP/OTX transmitter transmitter output power is higher than the threshold value written in th…
1.3.6.1.4.1.20044.52.2.3.2.208.1.4Columnpmc2002AlmLineTxBiasLowAlarmPortnread-onlycurrentSubcarrier Transceiver Bias Low Alarm :Alarm indicating that the XFP/OTX transmitter laser bias current is lower than the threshold value written in the XFP/OT…
1.3.6.1.4.1.20044.52.2.3.2.208.1.5Columnpmc2002AlmLineTxBiasHighAlarmPortnread-onlycurrentSubcarrier Transceiver Bias High Alarm :Alarm indicating that the XFP/OTX transmitter laser bias current is higher than the threshold value written in the XFP …
1.3.6.1.4.1.20044.52.2.3.2.208.1.8Columnpmc2002AlmLineTempLowAlarmPortnread-onlycurrentSubcarrier Transceiver Temp Low Alarm :Alarm indicating that the XFP/OTX temperature is lower than the threshold value written in the XFP/OTX EEPROM <Condtype>…
1.3.6.1.4.1.20044.52.2.3.2.208.1.9Columnpmc2002AlmLineTempHighAlarmPortnread-onlycurrentSubcarrier Transceiver Temp High Alarm :Alarm indicating that the XFP/OTX temperature is higher than the threshold value written in the XFP EEPROM <Condtype> L…
1.3.6.1.4.1.20044.52.2.3.2.208.1.16Columnpmc2002AlmLineRxPowerLowAlarmPortnread-onlycurrentSubcarrier Optical Rx Power Low Alarm :Alarm indicating that the XFP received optical power is lower than the threshold value written in the XFP EEPROM <Condty…
1.3.6.1.4.1.20044.52.2.3.2.208.1.17Columnpmc2002AlmLineRxPowerHighAlarmPortnread-onlycurrentSubcarrier Optical Rx Power High Alarm :Alarm indicating that the XFP received optical power is higher than the threshold value written in the XFP EEPROM <Cond…
1.3.6.1.4.1.20044.52.2.3.2.212Tablepmc2002AlmlineXfp1SupplyAlarmTablenot-accessiblecurrentList of pmc2002AlmlineXfp1SupplyAlarm Article
1.3.6.1.4.1.20044.52.2.3.2.212.1Rowpmc2002AlmlineXfp1SupplyAlarmEntrynot-accessiblecurrentRow definition for the pmc2002AlmlineXfp1SupplyAlarm table
1.3.6.1.4.1.20044.52.2.3.2.212.1.1Columnpmc2002AlmlineXfp1SupplyAlarmIndexread-onlycurrentIndex definition for the pmc2002AlmlineXfp1SupplyAlarm table
1.3.6.1.4.1.20044.52.2.3.2.212.1.2Columnpmc2002AlmLineVee5LowAlarmPortnread-onlycurrentVEE5 Power Supply Low Alarm :Alarm indicating the XFP/OTX VEE5 power supply is lower than the threshold written in the EEPROM <Condtype> LINE_VEE5_LOW_ALARM <P…
1.3.6.1.4.1.20044.52.2.3.2.212.1.3Columnpmc2002AlmLineVee5HighAlarmPortnread-onlycurrentVEE5 Power Supply High Alarm :Alarm indicating the XFP/OTX VEE5 power supply is higher than the threshold written in the EEPROM <Condtype> LINE_VEE5_HIGH_ALARM…
1.3.6.1.4.1.20044.52.2.3.2.212.1.4Columnpmc2002AlmLineVcc2LowAlarmPortnread-onlycurrentVCC2 Power Supply Low Alarm :Alarm indicating the XFP/OTX VCC2 power supply is lower than the threshold written in the EEPROM <Condtype> LINE_VCC2_LOW_ALARM <P…
1.3.6.1.4.1.20044.52.2.3.2.212.1.5Columnpmc2002AlmLineVcc2HighAlarmPortnread-onlycurrentVCC2 Power Supply High Alarm :Alarm indicating the XFP/OTX VCC2 power supply is higher than the threshold written in the EEPROM <Condtype> LINE_VCC2_HIGH_ALARM…
1.3.6.1.4.1.20044.52.2.3.2.212.1.6Columnpmc2002AlmLineVcc3LowAlarmPortnread-onlycurrentVCC3 Power Supply Low Alarm :Alarm indicating the XFP/OTX VCC3 power supply is lower than the threshold written in the EEPROM <Condtype> LINE_VCC3_LOW_ALARM <P…
1.3.6.1.4.1.20044.52.2.3.2.212.1.7Columnpmc2002AlmLineVcc3HighAlarmPortnread-onlycurrentVCC3 Power Supply High Alarm :Alarm indicating the XFP/OTX VCC3 power supply is higher than the threshold written in the EEPROM <Condtype> LINE_VCC3_HIGH_ALARM…
1.3.6.1.4.1.20044.52.2.3.2.212.1.8Columnpmc2002AlmLineVcc5LowAlarmPortnread-onlycurrentVCC5 Power Supply Low Alarm :Alarm indicating the XFP/OTX VCC5 power supply is lower than the threshold written in the EEPROM <Condtype> LINE_VCC5_LOW_ALARM <P…
1.3.6.1.4.1.20044.52.2.3.2.212.1.9Columnpmc2002AlmLineVcc5HighAlarmPortnread-onlycurrentVCC5 Power Supply High Alarm :Alarm indicating the XFP/OTX VCC5 power supply is higher than the threshold written in the EEPROM <Condtype> LINE_VCC5_HIGH_ALARM…
1.3.6.1.4.1.20044.52.2.3.2.212.1.10Columnpmc2002AlmLineVee5LowLineWarningPortnread-onlycurrentVEE5 Power Supply Low Warning :Warning indicating the XFP/OTX VEE5 power supply is lower than the threshold written in the EEPROM <Condtype> LINE_VEE5_LOW_LINE…
1.3.6.1.4.1.20044.52.2.3.2.212.1.11Columnpmc2002AlmLineVee5HighWarningPortnread-onlycurrentVEE5 Power Supply High Warning :Warning indicating the XFP/OTX VEE5 power supply is higher than the threshold written in the EEPROM <Condtype> LINE_VEE5_HIGH_W…
1.3.6.1.4.1.20044.52.2.3.2.212.1.12Columnpmc2002AlmLineVcc2LowWarningPortnread-onlycurrentVCC2 Power Supply Low Warning :Warning indicating the XFP/OTX VCC2 power supply is lower than the threshold written in the EEPROM <Condtype> LINE_VCC2_LOW_WARN…
1.3.6.1.4.1.20044.52.2.3.2.212.1.13Columnpmc2002AlmLineVcc2HighWarningPortnread-onlycurrentVCC2 Power Supply High Warning :Warning indicating the XFP/OTX VCC2 power supply is higher than the threshold written in the EEPROM <Condtype> LINE_VCC2_HIGH_W…
1.3.6.1.4.1.20044.52.2.3.2.212.1.14Columnpmc2002AlmLineVcc3LowWarningPortnread-onlycurrentVCC3 Power Supply Low Warning :Warning indicating the XFP/OTX VCC3 power supply is lower than the threshold written in the EEPROM <Condtype> LINE_VCC3_LOW_WARN…
1.3.6.1.4.1.20044.52.2.3.2.212.1.15Columnpmc2002AlmLineVcc3HighWarningPortnread-onlycurrentVCC3 Power Supply High Warning :Warning indicating the XFP/OTX VCC3 power supply is higher than the threshold written in the EEPROM <Condtype> LINE_VCC3_HIGH_W…
1.3.6.1.4.1.20044.52.2.3.2.212.1.16Columnpmc2002AlmLineVcc5LowWarningPortnread-onlycurrentVCC5 Power Supply Low Warning :Warning indicating the XFP/OTX VCC5 power supply is lower than the threshold written in the EEPROM <Condtype> LINE_VCC5_LOW_WARN…
1.3.6.1.4.1.20044.52.2.3.2.212.1.17Columnpmc2002AlmLineVcc5HighWarningPortnread-onlycurrentVCC5 Power Supply High Warning :Warning indicating the XFP/OTX VCC5 power supply is higher than the threshold written in the EEPROM <Condtype> LINE_VCC5_HIGH_W…
1.3.6.1.4.1.20044.52.2.3.2.224Tablepmc2002AlmlineOtx1TlhAlarmsTablenot-accessiblecurrentList of pmc2002AlmlineOtx1TlhAlarms Article
1.3.6.1.4.1.20044.52.2.3.2.224.1Rowpmc2002AlmlineOtx1TlhAlarmsEntrynot-accessiblecurrentRow definition for the pmc2002AlmlineOtx1TlhAlarms table
1.3.6.1.4.1.20044.52.2.3.2.224.1.1Columnpmc2002AlmlineOtx1TlhAlarmsIndexread-onlycurrentIndex definition for the pmc2002AlmlineOtx1TlhAlarms table
1.3.6.1.4.1.20044.52.2.3.2.224.1.6Columnpmc2002AlmLineModulatorAgingHighAlaPortnread-onlycurrentSubcarrier Modulator Aging High Alarm :Alarm indicating the Line OTX TLH modulator aging is higher than the threshold written in the EEPROM <Condtype> LINE_MOD…
1.3.6.1.4.1.20044.52.2.3.2.224.1.7Columnpmc2002AlmLineAgingHighAlaPortnread-onlycurrentSubcarrier OTX TLH Aging High Alarm :Alarm indicating the Line OTX TLH aging is higher than the threshold written in the EEPROM <Condtype> LINE_AGING_HIGH_ALA …
1.3.6.1.4.1.20044.52.2.3.2.224.1.10Columnpmc2002AlmLineCdrNotReadyPortnread-onlycurrentCDR Not Ready :This OID indicates the Clock Data Recovery unit is not yet initialized <Help> This alarm indicates the Clock Data Recovery unit is not yet initi…
1.3.6.1.4.1.20044.52.2.3.2.224.1.13Columnpmc2002AlmLineFreqDevHighAlaPortnread-onlycurrentSubcarrier Freq. Deviation High Alarm :Alarm indicating the Line OTX TLH frequency deviation is higher than the threshold written in the EEPROM <Condtype> LINE…
1.3.6.1.4.1.20044.52.2.3.2.224.1.15Columnpmc2002AlmLineLaserTempHighAlaPortnread-onlycurrentSubcarrier Laser Temp. High Alarm :Alarm indicating the Line OTX TLH laser temperature is higher than the threshold written in the EEPROM <Condtype> LINE_LASER…
1.3.6.1.4.1.20044.52.2.3.3Nodepmc2002AlmLineCrit
1.3.6.1.4.1.20044.52.2.3.3.7Tablepmc2002AlmsynthAlmLineTablenot-accessiblecurrentList of pmc2002AlmsynthAlmLine Article
1.3.6.1.4.1.20044.52.2.3.3.7.1Rowpmc2002AlmsynthAlmLineEntrynot-accessiblecurrentRow definition for the pmc2002AlmsynthAlmLine table
1.3.6.1.4.1.20044.52.2.3.3.7.1.1Columnpmc2002AlmsynthAlmLineIndexread-onlycurrentIndex definition for the pmc2002AlmsynthAlmLine table
1.3.6.1.4.1.20044.52.2.3.3.7.1.2Columnpmc2002AlmLineXfpAbsentPortnread-onlycurrentSubcarrier Optical Module Absent :This OID indicates that the line optical interface (XFP or OTX) is not plugged in. <Help> This alarm indicates if the line tr…
1.3.6.1.4.1.20044.52.2.3.3.7.1.3Columnpmc2002AlmLineXfpInitNotComplPortnread-onlycurrentSubcarrier Optical Module Ready :This OID indicates that the line optical interface (XFP or OTX) is not operational. <Help> This status indicates if the line t…
1.3.6.1.4.1.20044.52.2.3.3.7.1.5Columnpmc2002AlmLineHwFailPortnread-onlycurrentSubcarrier Port HW Failure :This OID indicates a failure on line port, most probably caused by a HW issue <Condtype> LINE_HW_FAIL <Probcause> equipmentMalfunct…
1.3.6.1.4.1.20044.52.2.3.3.7.1.6Columnpmc2002AlmLineXfpTxOffPortnread-onlycurrentSubcarrier Optical Module Laser Shutdown :This OID indicates the line optical output power is on <Help> This status indicates if the line transceiver laser is …
1.3.6.1.4.1.20044.52.2.3.3.7.1.7Columnpmc2002AlmLineLocalOosPortnread-onlycurrentSubcarrier In Service :This OID indicates that the Line port is In Service (1) of Out or Service (2) <Help> This status indicates if the line port is in servic…
1.3.6.1.4.1.20044.52.2.3.3.7.1.9Columnpmc2002AlmLineUpRdiInsPortnread-onlycurrentMS-RDI/L-RDI Inserted On Subcarrier :This OID indicates an upstream RDI has been inserted in the outgoing 10 Gb/s signal. <Help> This status indicates if a MS-…
1.3.6.1.4.1.20044.52.2.3.3.7.1.10Columnpmc2002AlmLineDdmWarningPortnread-onlycurrentWarning On Subcarrier Optical Module DDM :This OID indicates a warning is present coming out of Line optical interface DDM <Help> This alarm indicates if a DDM…
1.3.6.1.4.1.20044.52.2.3.3.7.1.11Columnpmc2002AlmLineDdmAlmPortnread-onlycurrentAlarm On Subcarrier Optical Module DDM :This OID indicates an alarm is present coming out of Line optical interface DDM <Help> This alarm indicates if a DDM Al…
1.3.6.1.4.1.20044.52.2.3.3.7.1.13Columnpmc2002AlmLineFailPortnread-onlycurrentSubcarrier Port Failure :This OID indicates a failure on the line port <Condtype> LINE_FAIL <Probcause> equipmentMalfunction (16) <Alarmtype> synthesisAlarm (1…
1.3.6.1.4.1.20044.52.2.3.3.128Tablepmc2002AlmdfrmAlmTablenot-accessiblecurrentList of pmc2002AlmdfrmAlm Article
1.3.6.1.4.1.20044.52.2.3.3.128.1Rowpmc2002AlmdfrmAlmEntrynot-accessiblecurrentRow definition for the pmc2002AlmdfrmAlm table
1.3.6.1.4.1.20044.52.2.3.3.128.1.1Columnpmc2002AlmdfrmAlmIndexread-onlycurrentIndex definition for the pmc2002AlmdfrmAlm table
1.3.6.1.4.1.20044.52.2.3.3.128.1.2Columnpmc2002AlmLineDwAisDetPortnread-onlycurrentMS-AIS/L-AIS Detected On Subcarrier Input :This OID indicates that an MS-AIS has been detected on line input signal <Help> This alarm indicates if there is a M…
1.3.6.1.4.1.20044.52.2.3.3.128.1.3Columnpmc2002AlmLineDwRdiDetPortnread-onlycurrentMS-RDI/L-RDI Detected On Subcarrier Input :This OID indicates that an MS-RDI has been detected on line input signal <Help> This alarm indicates if there is a M…
1.3.6.1.4.1.20044.52.2.3.3.128.1.4Columnpmc2002AlmLineDwOofPortnread-onlycurrentSONET/SDH Subcarrier Out Of Frame :This OID indicates that an Out Of Frame has been detected on line input signal <Help> This alarm indicates if a Loss Of Fram…
1.3.6.1.4.1.20044.52.2.3.3.128.1.5Columnpmc2002AlmLineDwLofPortnread-onlycurrentSONET/SDH Subcarrier Loss Of Frame :This OID indicates that a Loss Of Frame has been detected on line input signal <Help> This alarm indicates if there is a Lo…
1.3.6.1.4.1.20044.52.2.3.3.128.1.6Columnpmc2002AlmLineFecFailPortnread-onlycurrentFEC Decoding Fail :This OID indicates that the FEC decoder is in an overcapacity mode and not able to correct errors <Help> This alarm indicates if the FEC dec…
1.3.6.1.4.1.20044.52.2.3.3.133Tablepmc2002AlmlineSyncAlarmsTablenot-accessiblecurrentList of pmc2002AlmlineSyncAlarms Article
1.3.6.1.4.1.20044.52.2.3.3.133.1Rowpmc2002AlmlineSyncAlarmsEntrynot-accessiblecurrentRow definition for the pmc2002AlmlineSyncAlarms table
1.3.6.1.4.1.20044.52.2.3.3.133.1.1Columnpmc2002AlmlineSyncAlarmsIndexread-onlycurrentIndex definition for the pmc2002AlmlineSyncAlarms table
1.3.6.1.4.1.20044.52.2.3.3.133.1.13Columnpmc2002AlmLineDwLockerrPortnread-onlycurrentDownstream Clock Lock Error :This OID indicates that the deserializer input 10 Gb/s clock recovery is not locked. <Condtype> LINE_DW_LOCKERR <Probcause> receiv…
1.3.6.1.4.1.20044.52.2.3.3.133.1.14Columnpmc2002AlmLineUpLockerrPortnread-onlycurrentUpstream Clock Lock Error :This OID indicates that the serializer output 10 Gb/s clock multiplier unit is not locked. <Condtype> LINE_UP_LOCKERR <Probcause> re…
1.3.6.1.4.1.20044.52.2.3.3.133.1.17Columnpmc2002AlmLineDwLosPortnread-onlycurrentSubcarrier Input Loss Of Signal :This OID indicates a loss of signal on the 10 Gb/s input. <Help> This alarm indicates if an optical signal is detected on the …
1.3.6.1.4.1.20044.52.2.3.3.211Tablepmc2002AlmlineXfp1AlarmsTablenot-accessiblecurrentList of pmc2002AlmlineXfp1Alarms Article
1.3.6.1.4.1.20044.52.2.3.3.211.1Rowpmc2002AlmlineXfp1AlarmsEntrynot-accessiblecurrentRow definition for the pmc2002AlmlineXfp1Alarms table
1.3.6.1.4.1.20044.52.2.3.3.211.1.1Columnpmc2002AlmlineXfp1AlarmsIndexread-onlycurrentIndex definition for the pmc2002AlmlineXfp1Alarms table
1.3.6.1.4.1.20044.52.2.3.3.211.1.3Columnpmc2002AlmLineModNrPortnread-onlycurrentSubcarrier Optical Module Not Ready :This OID indicates that the module is unable to determine correct data. <Help> This alarm indicates if the line transceive…
1.3.6.1.4.1.20044.52.2.3.3.211.1.4Columnpmc2002AlmLineRxCdrNotLockedPortnread-onlycurrentSubcarrier Optical Rx CDR Unlocked :This OID indicates that a loss of lock on the receiving side CDR has been detected <Help> This alarm indicates if the Rx CD…
1.3.6.1.4.1.20044.52.2.3.3.211.1.6Columnpmc2002AlmLineRxNrPortnread-onlycurrentSubcarrier Optical Rx Not Ready :This OID indicates that a condition has arisen leading to invalid data on the receiving side. <Help> This alarm indicates if t…
1.3.6.1.4.1.20044.52.2.3.3.211.1.7Columnpmc2002AlmLineTxCdrNotLockedPortnread-onlycurrentSubcarrier Optical Tx CDR Unlocked :This OID indicates a loss of lock on the transmitting side CDR has been detected. <Help> This alarm indicates if the Tx CDR…
1.3.6.1.4.1.20044.52.2.3.3.211.1.8Columnpmc2002AlmLineTxFaultPortnread-onlycurrentSubcarrier Optical Tx Failure :This OID indicates a fault condition on the laser detected by the safety syste <Help> This alarm indicates if the laser of the l…
1.3.6.1.4.1.20044.52.2.3.3.211.1.9Columnpmc2002AlmLineTxNrPortnread-onlycurrentSubcarrier Optical Tx Not Ready :This OID indicates a condition has arisen leading to invalid data on the transmitting side <Help> This alarm indicates if the …
1.3.6.1.4.1.20044.52.2.3.3.211.1.15Columnpmc2002AlmLineWavelengthUnlockedPortnread-onlycurrentSubcarrier Optical Tx Wavelength Unlock :This OID indicates that the wavelength error is exceeding the manufacturer tolerance <Help> This alarm indicates if th…
1.3.6.1.4.1.20044.52.2.3.3.211.1.16Columnpmc2002AlmLineTecFaultPortnread-onlycurrentSubcarrier Optical Tx Temp Regul. Failed :This OID indicates a failure on the TEC module <Help> This alarm indicates if the TEC of the line transceiver is in f…
1.3.6.1.4.1.20044.52.2.3.3.211.1.17Columnpmc2002AlmLineApdSupplyFaultPortnread-onlycurrentSubcarrier Rx Photodiode Power Failed :This OID indicates a failure on the APD power supply <Help> This alarm indicates if the APD power supply is in fail cond…
1.3.6.1.4.1.20044.52.3Nodepmc2002measures
1.3.6.1.4.1.20044.52.3.1Nodepmc2002MesrOther
1.3.6.1.4.1.20044.52.3.1.0Scalarpmc2002Mesrsynth0read-onlydeprecatedNot Used :This OID gives the unit used on AUX1 measurement of XFP#1 (Unit = )
1.3.6.1.4.1.20044.52.3.1.1Scalarpmc2002Mesrsynth1read-onlydeprecatedNot Used :This OID gives the unit used on AUX2 measurement of XFP#1 (Unit = )
1.3.6.1.4.1.20044.52.3.2Nodepmc2002MesrClient
1.3.6.1.4.1.20044.52.3.2.16Tablepmc2002MesrclientModTempMeasTablenot-accessiblecurrentList of pmc2002MesrclientModTempMeas Article
1.3.6.1.4.1.20044.52.3.2.16.1Rowpmc2002MesrclientModTempMeasEntrynot-accessiblecurrentRow definition for the pmc2002MesrclientModTempMeas table
1.3.6.1.4.1.20044.52.3.2.16.1.1Columnpmc2002MesrclientModTempMeasIndexread-onlycurrentIndex definition for the pmc2002MesrclientModTempMeas table
1.3.6.1.4.1.20044.52.3.2.16.1.2Columnpmc2002MesrclientModTempMeasPortnread-onlycurrentSFP+ Temperature :This OID gives the temperature value of the SFP plugged in port, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/256) (Un…
1.3.6.1.4.1.20044.52.3.2.32Tablepmc2002MesrclientBiasCurrentMeasTablenot-accessiblecurrentList of pmc2002MesrclientBiasCurrentMeas Article
1.3.6.1.4.1.20044.52.3.2.32.1Rowpmc2002MesrclientBiasCurrentMeasEntrynot-accessiblecurrentRow definition for the pmc2002MesrclientBiasCurrentMeas table
1.3.6.1.4.1.20044.52.3.2.32.1.1Columnpmc2002MesrclientBiasCurrentMeasIndexread-onlycurrentIndex definition for the pmc2002MesrclientBiasCurrentMeas table
1.3.6.1.4.1.20044.52.3.2.32.1.2Columnpmc2002MesrclientBiasCurrentMeasPortnread-onlycurrentSFP+ Laser Bias :This OID gives the bias value of the SFP plugged into port, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/500) (Unit = mA) <Hel…
1.3.6.1.4.1.20044.52.3.2.40Tablepmc2002MesrclientTxPowerMeasTablenot-accessiblecurrentList of pmc2002MesrclientTxPowerMeas Article
1.3.6.1.4.1.20044.52.3.2.40.1Rowpmc2002MesrclientTxPowerMeasEntrynot-accessiblecurrentRow definition for the pmc2002MesrclientTxPowerMeas table
1.3.6.1.4.1.20044.52.3.2.40.1.1Columnpmc2002MesrclientTxPowerMeasIndexread-onlycurrentIndex definition for the pmc2002MesrclientTxPowerMeas table
1.3.6.1.4.1.20044.52.3.2.40.1.2Columnpmc2002MesrclientTxPowerMeasPortnread-onlycurrentSFP+ Tx Power :This OID gives the transmit power value of the SFP plugged into port, read from the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) …
1.3.6.1.4.1.20044.52.3.2.48Tablepmc2002MesrclientRxPowerMeasTablenot-accessiblecurrentList of pmc2002MesrclientRxPowerMeas Article
1.3.6.1.4.1.20044.52.3.2.48.1Rowpmc2002MesrclientRxPowerMeasEntrynot-accessiblecurrentRow definition for the pmc2002MesrclientRxPowerMeas table
1.3.6.1.4.1.20044.52.3.2.48.1.1Columnpmc2002MesrclientRxPowerMeasIndexread-onlycurrentIndex definition for the pmc2002MesrclientRxPowerMeas table
1.3.6.1.4.1.20044.52.3.2.48.1.2Columnpmc2002MesrclientRxPowerMeasPortnread-onlycurrentSFP+ Rx Power :This OID gives the receive power value of the SFP plugged into port, read in the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Un…
1.3.6.1.4.1.20044.52.3.3Nodepmc2002MesrLine
1.3.6.1.4.1.20044.52.3.3.208Tablepmc2002Mesrline1ModTempMeasTablenot-accessiblecurrentList of pmc2002Mesrline1ModTempMeas Article
1.3.6.1.4.1.20044.52.3.3.208.1Rowpmc2002Mesrline1ModTempMeasEntrynot-accessiblecurrentRow definition for the pmc2002Mesrline1ModTempMeas table
1.3.6.1.4.1.20044.52.3.3.208.1.1Columnpmc2002Mesrline1ModTempMeasIndexread-onlycurrentIndex definition for the pmc2002Mesrline1ModTempMeas table
1.3.6.1.4.1.20044.52.3.3.208.1.2Columnpmc2002Mesrline1ModTempMeasPortnread-onlycurrentOTX TLH Temperature :This OID gives the temperature of the OTX TLH plugged in line#n, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/256) …
1.3.6.1.4.1.20044.52.3.3.209Tablepmc2002Mesrline1ReservedTablenot-accessibledeprecatedList of pmc2002Mesrline1Reserved Article
1.3.6.1.4.1.20044.52.3.3.209.1Rowpmc2002Mesrline1ReservedEntrynot-accessibledeprecatedRow definition for the pmc2002Mesrline1Reserved table
1.3.6.1.4.1.20044.52.3.3.209.1.1Columnpmc2002Mesrline1ReservedIndexread-onlydeprecatedIndex definition for the pmc2002Mesrline1Reserved table
1.3.6.1.4.1.20044.52.3.3.209.1.2Columnpmc2002Mesrline1ReservedPortnread-onlydeprecatedNot Used :Reserved
1.3.6.1.4.1.20044.52.3.3.210Tablepmc2002Mesrline1BiasCurrentMeasTablenot-accessiblecurrentList of pmc2002Mesrline1BiasCurrentMeas Article
1.3.6.1.4.1.20044.52.3.3.210.1Rowpmc2002Mesrline1BiasCurrentMeasEntrynot-accessiblecurrentRow definition for the pmc2002Mesrline1BiasCurrentMeas table
1.3.6.1.4.1.20044.52.3.3.210.1.1Columnpmc2002Mesrline1BiasCurrentMeasIndexread-onlycurrentIndex definition for the pmc2002Mesrline1BiasCurrentMeas table
1.3.6.1.4.1.20044.52.3.3.210.1.2Columnpmc2002Mesrline1BiasCurrentMeasPortnread-onlycurrentOTX TLH Tx Bias Current :This OID gives the bias value of the OTX TLH plugged in line #n, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/500) (Un…
1.3.6.1.4.1.20044.52.3.3.211Tablepmc2002Mesrline1TxPowerMeasTablenot-accessiblecurrentList of pmc2002Mesrline1TxPowerMeas Article
1.3.6.1.4.1.20044.52.3.3.211.1Rowpmc2002Mesrline1TxPowerMeasEntrynot-accessiblecurrentRow definition for the pmc2002Mesrline1TxPowerMeas table
1.3.6.1.4.1.20044.52.3.3.211.1.1Columnpmc2002Mesrline1TxPowerMeasIndexread-onlycurrentIndex definition for the pmc2002Mesrline1TxPowerMeas table
1.3.6.1.4.1.20044.52.3.3.211.1.2Columnpmc2002Mesrline1TxPowerMeasPortnread-onlycurrentOTX TLH Tx Power :This OID gives the transmit power value of the OTX TLH plugged in line #n, read from the DDM (Digital Diagnostic Monitoring) (Power = 10*log(…
1.3.6.1.4.1.20044.52.3.3.212Tablepmc2002Mesrline1RxPowerMeasTablenot-accessiblecurrentList of pmc2002Mesrline1RxPowerMeas Article
1.3.6.1.4.1.20044.52.3.3.212.1Rowpmc2002Mesrline1RxPowerMeasEntrynot-accessiblecurrentRow definition for the pmc2002Mesrline1RxPowerMeas table
1.3.6.1.4.1.20044.52.3.3.212.1.1Columnpmc2002Mesrline1RxPowerMeasIndexread-onlycurrentIndex definition for the pmc2002Mesrline1RxPowerMeas table
1.3.6.1.4.1.20044.52.3.3.212.1.2Columnpmc2002Mesrline1RxPowerMeasPortnread-onlycurrentOTX TLH Rx Power :This OID gives the receive power value of the OTX TLH plugged in line #n, read from the DDM (Digital Diagnostic Monitoring) (Power = 10*log(A…
1.3.6.1.4.1.20044.52.3.3.213Tablepmc2002Mesrline1Aux1MeasTablenot-accessibledeprecatedList of pmc2002Mesrline1Aux1Meas Article
1.3.6.1.4.1.20044.52.3.3.213.1Rowpmc2002Mesrline1Aux1MeasEntrynot-accessibledeprecatedRow definition for the pmc2002Mesrline1Aux1Meas table
1.3.6.1.4.1.20044.52.3.3.213.1.1Columnpmc2002Mesrline1Aux1MeasIndexread-onlydeprecatedIndex definition for the pmc2002Mesrline1Aux1Meas table
1.3.6.1.4.1.20044.52.3.3.213.1.2Columnpmc2002Mesrline1Aux1MeasPortnread-onlydeprecatedNot Used :This OID gives the receive power value read in the DDM (Digital Diagnostic Monitoring) of the OTX TLH plugged in line #n (Unit = ?)
1.3.6.1.4.1.20044.52.3.3.214Tablepmc2002Mesrline1Aux2MeasTablenot-accessibledeprecatedList of pmc2002Mesrline1Aux2Meas Article
1.3.6.1.4.1.20044.52.3.3.214.1Rowpmc2002Mesrline1Aux2MeasEntrynot-accessibledeprecatedRow definition for the pmc2002Mesrline1Aux2Meas table
1.3.6.1.4.1.20044.52.3.3.214.1.1Columnpmc2002Mesrline1Aux2MeasIndexread-onlydeprecatedIndex definition for the pmc2002Mesrline1Aux2Meas table
1.3.6.1.4.1.20044.52.3.3.214.1.2Columnpmc2002Mesrline1Aux2MeasPortnread-onlydeprecatedNot Used :This OID gives the receive power value read in the DDM (Digital Diagnostic Monitoring) of the OTX TLH plugged in line #n (Unit = ?)
1.3.6.1.4.1.20044.52.3.3.224Tablepmc2002Mesrline1AgingTablenot-accessiblecurrentList of pmc2002Mesrline1Aging Article
1.3.6.1.4.1.20044.52.3.3.224.1Rowpmc2002Mesrline1AgingEntrynot-accessiblecurrentRow definition for the pmc2002Mesrline1Aging table
1.3.6.1.4.1.20044.52.3.3.224.1.1Columnpmc2002Mesrline1AgingIndexread-onlycurrentIndex definition for the pmc2002Mesrline1Aging table
1.3.6.1.4.1.20044.52.3.3.224.1.2Columnpmc2002Mesrline1AgingPortnread-onlycurrentOTX TLH Aging :This OID gives the aging of the Line OTX TLH, read from the DDM (Digital Diagnostic Monitoring) (Aging = AV) (Unit = %) <Help> This measure give…
1.3.6.1.4.1.20044.52.3.3.225Tablepmc2002Mesrline1LaserTemperatureTablenot-accessibledeprecatedList of pmc2002Mesrline1LaserTemperature Article
1.3.6.1.4.1.20044.52.3.3.225.1Rowpmc2002Mesrline1LaserTemperatureEntrynot-accessibledeprecatedRow definition for the pmc2002Mesrline1LaserTemperature table
1.3.6.1.4.1.20044.52.3.3.225.1.1Columnpmc2002Mesrline1LaserTemperatureIndexread-onlydeprecatedIndex definition for the pmc2002Mesrline1LaserTemperature table
1.3.6.1.4.1.20044.52.3.3.225.1.2Columnpmc2002Mesrline1LaserTemperaturePortnread-onlydeprecatedOTX TLH Laser Temperature :This OID gives the laser temperature of the Line OTX TLH, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/256) (…
1.3.6.1.4.1.20044.52.3.3.226Tablepmc2002Mesrline1FreqDeviationTablenot-accessiblecurrentList of pmc2002Mesrline1FreqDeviation Article
1.3.6.1.4.1.20044.52.3.3.226.1Rowpmc2002Mesrline1FreqDeviationEntrynot-accessiblecurrentRow definition for the pmc2002Mesrline1FreqDeviation table
1.3.6.1.4.1.20044.52.3.3.226.1.1Columnpmc2002Mesrline1FreqDeviationIndexread-onlycurrentIndex definition for the pmc2002Mesrline1FreqDeviation table
1.3.6.1.4.1.20044.52.3.3.226.1.2Columnpmc2002Mesrline1FreqDeviationPortnread-onlycurrentOTX TLH Frequency Deviation :This OID gives the frequency deviation of the Line OTX TLH, read from the DDM (Digital Diagnostic Monitoring) (Deviation = (AV-327…
1.3.6.1.4.1.20044.52.3.3.227Tablepmc2002Mesrline1LaserWvlengthTablenot-accessiblecurrentList of pmc2002Mesrline1LaserWvlength Article
1.3.6.1.4.1.20044.52.3.3.227.1Rowpmc2002Mesrline1LaserWvlengthEntrynot-accessiblecurrentRow definition for the pmc2002Mesrline1LaserWvlength table
1.3.6.1.4.1.20044.52.3.3.227.1.1Columnpmc2002Mesrline1LaserWvlengthIndexread-onlycurrentIndex definition for the pmc2002Mesrline1LaserWvlength table
1.3.6.1.4.1.20044.52.3.3.227.1.2Columnpmc2002Mesrline1LaserWvlengthPortnread-onlycurrentOTX TLH Laser Wavelength :This OID gives the laser wavelength of the Line OTX TLH, read from the DDM (Digital Diagnostic Monitoring) (Wavelength=299792458/((19…
1.3.6.1.4.1.20044.52.4Nodepmc2002counters
1.3.6.1.4.1.20044.52.4.1Nodepmc2002CntOther
1.3.6.1.4.1.20044.52.4.2Nodepmc2002CntClient
1.3.6.1.4.1.20044.52.4.2.32Tablepmc2002CntclientUpErrCntTablenot-accessiblecurrentList of pmc2002CntclientUpErrCnt Article
1.3.6.1.4.1.20044.52.4.2.32.1Rowpmc2002CntclientUpErrCntEntrynot-accessiblecurrentRow definition for the pmc2002CntclientUpErrCnt table
1.3.6.1.4.1.20044.52.4.2.32.1.1Columnpmc2002CntclientUpErrCntIndexread-onlycurrentIndex definition for the pmc2002CntclientUpErrCnt table
1.3.6.1.4.1.20044.52.4.2.32.1.2Columnpmc2002CntclientUpErrCntValuePortnread-onlycurrentClient Input Errors :This counter is increased each time a FCS error is detected in 10GbE mode or a B1 error is detected in OC-192/STM-64 mode on the client in…
1.3.6.1.4.1.20044.52.4.2.32.1.3Columnpmc2002CntclientUpErrCntErrorPortnread-onlycurrentClient Counter Error :This OID when set indicates the FCS error counter value is invalid on input Port
1.3.6.1.4.1.20044.52.4.2.32.1.4Columnpmc2002CntclientUpErrCntOverloadPortnread-onlycurrentClient Counter Overload :This OID when set indicates a FCS error counter overload on input Port
1.3.6.1.4.1.20044.52.4.2.40Tablepmc2002CntclientUpTimCntTablenot-accessiblecurrentList of pmc2002CntclientUpTimCnt Article
1.3.6.1.4.1.20044.52.4.2.40.1Rowpmc2002CntclientUpTimCntEntrynot-accessiblecurrentRow definition for the pmc2002CntclientUpTimCnt table
1.3.6.1.4.1.20044.52.4.2.40.1.1Columnpmc2002CntclientUpTimCntIndexread-onlycurrentIndex definition for the pmc2002CntclientUpTimCnt table
1.3.6.1.4.1.20044.52.4.2.40.1.2Columnpmc2002CntclientUpTimCntValuePortnread-onlycurrentClient Upstream Timer Counter :This is the timing counter dedicated to the upstream access counters. It is incremented every 125 us.
1.3.6.1.4.1.20044.52.4.2.40.1.3Columnpmc2002CntclientUpTimCntErrorPortnread-onlycurrentClient Counter Error :This OID when set indicates the upstream timing counter value is invalid on Port
1.3.6.1.4.1.20044.52.4.2.40.1.4Columnpmc2002CntclientUpTimCntOverloadPortnread-onlycurrentClient Counter Overload :This OID when set indicates a upstream timing counter overload on Port
1.3.6.1.4.1.20044.52.4.2.64Tablepmc2002CntclientDwErrCntTablenot-accessiblecurrentList of pmc2002CntclientDwErrCnt Article
1.3.6.1.4.1.20044.52.4.2.64.1Rowpmc2002CntclientDwErrCntEntrynot-accessiblecurrentRow definition for the pmc2002CntclientDwErrCnt table
1.3.6.1.4.1.20044.52.4.2.64.1.1Columnpmc2002CntclientDwErrCntIndexread-onlycurrentIndex definition for the pmc2002CntclientDwErrCnt table
1.3.6.1.4.1.20044.52.4.2.64.1.2Columnpmc2002CntclientDwErrCntValuePortnread-onlycurrentClient Output Errors :This counter is increased each time a B1/FCS error is detected on the client output stream <Help> This counter gives the number of FCS er…
1.3.6.1.4.1.20044.52.4.2.64.1.3Columnpmc2002CntclientDwErrCntErrorPortnread-onlycurrentClient Counter Error :This OID when set indicates the FCS error counter value is invalid on output Port
1.3.6.1.4.1.20044.52.4.2.64.1.4Columnpmc2002CntclientDwErrCntOverloadPortnread-onlycurrentClient Counter Overload :This OID when set indicates a FCS error counter overload on output Port
1.3.6.1.4.1.20044.52.4.2.72Tablepmc2002CntclientDwTimCntTablenot-accessiblecurrentList of pmc2002CntclientDwTimCnt Article
1.3.6.1.4.1.20044.52.4.2.72.1Rowpmc2002CntclientDwTimCntEntrynot-accessiblecurrentRow definition for the pmc2002CntclientDwTimCnt table
1.3.6.1.4.1.20044.52.4.2.72.1.1Columnpmc2002CntclientDwTimCntIndexread-onlycurrentIndex definition for the pmc2002CntclientDwTimCnt table
1.3.6.1.4.1.20044.52.4.2.72.1.2Columnpmc2002CntclientDwTimCntValuePortnread-onlycurrentClient Downstream Timer Counter :This is the timing counter dedicated to the downstream access counters. It is incremented every 125 us.
1.3.6.1.4.1.20044.52.4.2.72.1.3Columnpmc2002CntclientDwTimCntErrorPortnread-onlycurrentClient Counter Error :This OID when set indicates the downstream timer counter value is invalid on Port
1.3.6.1.4.1.20044.52.4.2.72.1.4Columnpmc2002CntclientDwTimCntOverloadPortnread-onlycurrentClient Counter Overload :This OID when set indicates a downstream timer counter overload on Port
1.3.6.1.4.1.20044.52.4.3Nodepmc2002CntLine
1.3.6.1.4.1.20044.52.4.3.152Tablepmc2002CntlineDfrmErrCntTablenot-accessiblecurrentList of pmc2002CntlineDfrmErrCnt Article
1.3.6.1.4.1.20044.52.4.3.152.1Rowpmc2002CntlineDfrmErrCntEntrynot-accessiblecurrentRow definition for the pmc2002CntlineDfrmErrCnt table
1.3.6.1.4.1.20044.52.4.3.152.1.1Columnpmc2002CntlineDfrmErrCntIndexread-onlycurrentIndex definition for the pmc2002CntlineDfrmErrCnt table
1.3.6.1.4.1.20044.52.4.3.152.1.2Columnpmc2002CntlineDfrmErrCntValuePortnread-onlycurrentSubcarrier B1 Errors :This counter is incremented each time a B1 error is detected on the Deframer input stream. <Help> This counter gives the number of B1 err…
1.3.6.1.4.1.20044.52.4.3.152.1.3Columnpmc2002CntlineDfrmErrCntErrorPortnread-onlycurrentLine Counter Error :This OID when set indicates the B1 error counter value is invalid on Port
1.3.6.1.4.1.20044.52.4.3.152.1.4Columnpmc2002CntlineDfrmErrCntOverloadPortnread-onlycurrentLine Counter Overload :This OID when set indicates a B1 error counter overload on Port
1.3.6.1.4.1.20044.52.4.3.153Tablepmc2002CntlineDfrmTimCntTablenot-accessiblecurrentList of pmc2002CntlineDfrmTimCnt Article
1.3.6.1.4.1.20044.52.4.3.153.1Rowpmc2002CntlineDfrmTimCntEntrynot-accessiblecurrentRow definition for the pmc2002CntlineDfrmTimCnt table
1.3.6.1.4.1.20044.52.4.3.153.1.1Columnpmc2002CntlineDfrmTimCntIndexread-onlycurrentIndex definition for the pmc2002CntlineDfrmTimCnt table
1.3.6.1.4.1.20044.52.4.3.153.1.2Columnpmc2002CntlineDfrmTimCntValuePortnread-onlycurrentSubcarrier Timer :This is the timing counter dedicated to the downstream deframer counters. It is incremented every 125 us.
1.3.6.1.4.1.20044.52.4.3.153.1.3Columnpmc2002CntlineDfrmTimCntErrorPortnread-onlycurrentLine Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port
1.3.6.1.4.1.20044.52.4.3.153.1.4Columnpmc2002CntlineDfrmTimCntOverloadPortnread-onlycurrentLine Counter Overload :This OID when set indicates a deframer timer counter overload on Port
1.3.6.1.4.1.20044.52.4.3.154Tablepmc2002CntlineDfrmPrimErrCntTablenot-accessiblecurrentList of pmc2002CntlineDfrmPrimErrCnt Article
1.3.6.1.4.1.20044.52.4.3.154.1Rowpmc2002CntlineDfrmPrimErrCntEntrynot-accessiblecurrentRow definition for the pmc2002CntlineDfrmPrimErrCnt table
1.3.6.1.4.1.20044.52.4.3.154.1.1Columnpmc2002CntlineDfrmPrimErrCntIndexread-onlycurrentIndex definition for the pmc2002CntlineDfrmPrimErrCnt table
1.3.6.1.4.1.20044.52.4.3.154.1.2Columnpmc2002CntlineDfrmPrimErrCntValuePortnread-onlycurrentSubcarrier Input FEC Corrected Errors :This counter is incremented each time an error is corrected by the Forward Error Correction decoder <Help> This counter …
1.3.6.1.4.1.20044.52.4.3.154.1.3Columnpmc2002CntlineDfrmPrimErrCntErrorPortnread-onlycurrentLine FEC Counter Error :This bit when set indicates the FEC counter value is invalid on Port
1.3.6.1.4.1.20044.52.4.3.154.1.4Columnpmc2002CntlineDfrmPrimErrCntOverloadPortnread-onlycurrentLine FEC Counter Overload :This bit when set indicates a FEC counter overload on Port
1.3.6.1.4.1.20044.52.4.259Scalarpmc2002CntCountersResetread-writecurrentCounters Reset:This OID resets and restarts all the counters
1.3.6.1.4.1.20044.52.4.260Scalarpmc2002CntCountersStopread-writecurrentCounters stop:This OID stops all the counters
1.3.6.1.4.1.20044.52.6Nodepmc2002controlsWrite
1.3.6.1.4.1.20044.52.6.1Nodepmc2002CtrlOther
1.3.6.1.4.1.20044.52.6.1.1Nodepmc2002CtrlconfMgnt1
1.3.6.1.4.1.20044.52.6.1.1.1Scalarpmc2002CtrlConf1Load1read-writecurrentLoad Configuration Tables Set Nb 1 :When set this OID enables loading from flash configuration1 into the PM.
1.3.6.1.4.1.20044.52.6.1.1.2Scalarpmc2002CtrlConf2Load1read-writecurrentLoad Configuration Tables Set Nb 2 :When set this OID enables loading from flash configuration2 into the PM.
1.3.6.1.4.1.20044.52.6.1.1.10Scalarpmc2002CtrlConf2Flash1read-writecurrentWrite Configuration Tables :This OID saves the current configuration of the PM as configuration2 in the flash. <Help> This control saves the customer configura…
1.3.6.1.4.1.20044.52.6.1.1.14Scalarpmc2002CtrlConf2Clear1read-writecurrentClear Configuration Tables :This OID clears the configuration tables from configuration2 in the flash. <Help> This control restores the default configuration o…
1.3.6.1.4.1.20044.52.6.1.4Nodepmc2002Ctrlsynth4
1.3.6.1.4.1.20044.52.6.1.4.1Scalarpmc2002CtrlCorrelatOnread-writecurrentEnable Alarm Correlation :This OID enables the alarm correlation in the PM.
1.3.6.1.4.1.20044.52.6.1.4.2Scalarpmc2002CtrlCorrelatOffread-writecurrentDisable Alarm Correlation :This OID disables the alarm correlation in the PM.
1.3.6.1.4.1.20044.52.6.1.5Nodepmc2002CtrlswMgnt
1.3.6.1.4.1.20044.52.6.1.5.2Scalarpmc2002CtrlColdResetread-writecurrentPM Cold Reset :This OID, when set, causes a cold reset of the PM. This reset is traffic affecting, and the configuration of PM is reloaded on start-up. <Help> …
1.3.6.1.4.1.20044.52.6.1.5.3Scalarpmc2002CtrlWarmResetread-writecurrentPM Warm Reset :This OID, when set, causes a warm reset of the PM. This reset is not traffic affecting, and the configuration of PM remains unchanged. <Help> Th…
1.3.6.1.4.1.20044.52.6.1.5.5Scalarpmc2002CtrlLoadSwBank1read-writecurrentSet Software Nb 1 As Active :This OID, when set, loads the SW from bank1 into the PM. It must be followed by a reset. <Help> This controls selects the first SW…
1.3.6.1.4.1.20044.52.6.1.5.6Scalarpmc2002CtrlLoadSwBank2read-writecurrentSet Software Nb 2 As Active :This OID, when set, loads the SW from bank2 into the PM. It must be followed by a reset. <Help> This controls selects the second S…
1.3.6.1.4.1.20044.52.6.1.6Nodepmc2002CtrlgwMgnt
1.3.6.1.4.1.20044.52.6.1.6.1Scalarpmc2002CtrlCurrentGwResetread-writecurrentActive Gateware Reset :This OID, when set, resets the active gateware. It is traffic affecting.
1.3.6.1.4.1.20044.52.6.1.6.5Scalarpmc2002CtrlLoadGwBank1read-writecurrentSet Gateware Nb 1 As Active :This OID, when set, loads the GW from bank1 (Flash) into the PM. It is followed by an automatic gateware cold reset. <Help> This c…
1.3.6.1.4.1.20044.52.6.1.6.6Scalarpmc2002CtrlLoadGwBank2read-writecurrentSet Gateware Nb 2 As Active :This OID, when set, loads the GW from bank2 (Flash) into the PM. It is followed by an automatic gateware cold reset.
1.3.6.1.4.1.20044.52.6.1.6.7Scalarpmc2002CtrlLoadGwBank3read-writecurrentSet Gateware Nb 3 As Active :This OID, when set, loads the GW from bank3 (Flash) into the PM. It is followed by an automatic gateware cold reset. <Help> This c…
1.3.6.1.4.1.20044.52.6.1.6.8Scalarpmc2002CtrlLoadGwBank4read-writecurrentSet Gateware Nb 4 As Active :This OID, when set, loads the GW from bank4 (Flash) into the PM. It is followed by an automatic gateware cold reset.
1.3.6.1.4.1.20044.52.6.1.192Nodepmc2002CtrlledTest
1.3.6.1.4.1.20044.52.6.1.192.1Scalarpmc2002CtrlGreenLedread-writecurrentGreen Leds Test :This OID switches on all the green Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to green
1.3.6.1.4.1.20044.52.6.1.192.2Scalarpmc2002CtrlRedLedread-writecurrentRed Leds Test :This OID switches on all the red Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to red
1.3.6.1.4.1.20044.52.6.1.192.3Scalarpmc2002CtrlLedOffread-writecurrentLeds Off :This OID switches off all the Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to OFF
1.3.6.1.4.1.20044.52.6.1.193Nodepmc2002CtrlmoduleOosMode
1.3.6.1.4.1.20044.52.6.1.193.1Scalarpmc2002CtrlModuleOosModeread-writecurrentPM Out Of Service :This OID sets the PM1008 Out Of Service <Help> This control defines the service state of the complete module
1.3.6.1.4.1.20044.52.6.1.196Scalarpmc2002CtrlmoduleDccMgntread-writecurrentDCC Mode :This OID defines the DCC mode of the PM (No DCC, Terminal Line 1, Terminal Line 2, Terminal Line 1&2) <Help> This control defines the DCC mode of the…
1.3.6.1.4.1.20044.52.6.1.197Nodepmc2002CtrlmaintenanceMode
1.3.6.1.4.1.20044.52.6.1.197.1Scalarpmc2002CtrlMaintenanceModeread-writecurrentEnable Maintenance :This OID enables the maintenance mode on the PM. <Help> This control enables the maintenance mode on the PM.
1.3.6.1.4.1.20044.52.6.2Nodepmc2002CtrlClient
1.3.6.1.4.1.20044.52.6.2.16Tablepmc2002CtrlaccessLoopTablenot-accessiblecurrentList of pmc2002CtrlaccessLoop Article
1.3.6.1.4.1.20044.52.6.2.16.1Rowpmc2002CtrlaccessLoopEntrynot-accessiblecurrentRow definition for the pmc2002CtrlaccessLoop table
1.3.6.1.4.1.20044.52.6.2.16.1.1Columnpmc2002CtrlaccessLoopIndexread-onlycurrentIndex definition for the pmc2002CtrlaccessLoop table
1.3.6.1.4.1.20044.52.6.2.16.1.2Columnpmc2002CtrlaccessLoopPortnread-writecurrentClient Facility Loopback :This OID operates a Client Facility Loopback, looping client input signal on the client output port. The loop is located on the clien…
1.3.6.1.4.1.20044.52.6.2.18Tablepmc2002CtrlportOosModeTablenot-accessiblecurrentList of pmc2002CtrlportOosMode Article
1.3.6.1.4.1.20044.52.6.2.18.1Rowpmc2002CtrlportOosModeEntrynot-accessiblecurrentRow definition for the pmc2002CtrlportOosMode table
1.3.6.1.4.1.20044.52.6.2.18.1.1Columnpmc2002CtrlportOosModeIndexread-onlycurrentIndex definition for the pmc2002CtrlportOosMode table
1.3.6.1.4.1.20044.52.6.2.18.1.2Columnpmc2002CtrlportOosModePortnread-writecurrentClient Port Out Of Service :This OID sets the client port Out Of Service <Help> This controls defines the service state of the client port
1.3.6.1.4.1.20044.52.6.2.20Tablepmc2002CtrlsfpOffCtrlTablenot-accessiblecurrentList of pmc2002CtrlsfpOffCtrl Article
1.3.6.1.4.1.20044.52.6.2.20.1Rowpmc2002CtrlsfpOffCtrlEntrynot-accessiblecurrentRow definition for the pmc2002CtrlsfpOffCtrl table
1.3.6.1.4.1.20044.52.6.2.20.1.1Columnpmc2002CtrlsfpOffCtrlIndexread-onlycurrentIndex definition for the pmc2002CtrlsfpOffCtrl table
1.3.6.1.4.1.20044.52.6.2.20.1.2Columnpmc2002CtrlsfpOffCtrlPortnread-writecurrentClient SFP+ Optical Laser OFF :This OID switches off the SFP. <Help> This control defines the laser state of the client transceiver
1.3.6.1.4.1.20044.52.6.2.21Tablepmc2002CtrlcsfUpInsTablenot-accessiblecurrentList of pmc2002CtrlcsfUpIns Article
1.3.6.1.4.1.20044.52.6.2.21.1Rowpmc2002CtrlcsfUpInsEntrynot-accessiblecurrentRow definition for the pmc2002CtrlcsfUpIns table
1.3.6.1.4.1.20044.52.6.2.21.1.1Columnpmc2002CtrlcsfUpInsIndexread-onlycurrentIndex definition for the pmc2002CtrlcsfUpIns table
1.3.6.1.4.1.20044.52.6.2.21.1.2Columnpmc2002CtrlcsfUpInsPortnread-writecurrentClient Signal Fail Insertion :This OID, when set, inserts a client signal fail in the upstream client Port. <Help> This control inserts a Client Signal Fail fo…
1.3.6.1.4.1.20044.52.6.2.22Tablepmc2002CtrlcaisDwInsTablenot-accessiblecurrentList of pmc2002CtrlcaisDwIns Article
1.3.6.1.4.1.20044.52.6.2.22.1Rowpmc2002CtrlcaisDwInsEntrynot-accessiblecurrentRow definition for the pmc2002CtrlcaisDwIns table
1.3.6.1.4.1.20044.52.6.2.22.1.1Columnpmc2002CtrlcaisDwInsIndexread-onlycurrentIndex definition for the pmc2002CtrlcaisDwIns table
1.3.6.1.4.1.20044.52.6.2.22.1.2Columnpmc2002CtrlcaisDwInsPortnread-writecurrentClient AIS Insertion :This OID, when set, inserts a client AIS on the downstream client Port. <Help> This control inserts a Client AIS for the client port
1.3.6.1.4.1.20044.52.6.2.26Tablepmc2002CtrlclientAccessTermLoopTablenot-accessiblecurrentList of pmc2002CtrlclientAccessTermLoop Article
1.3.6.1.4.1.20044.52.6.2.26.1Rowpmc2002CtrlclientAccessTermLoopEntrynot-accessiblecurrentRow definition for the pmc2002CtrlclientAccessTermLoop table
1.3.6.1.4.1.20044.52.6.2.26.1.1Columnpmc2002CtrlclientAccessTermLoopIndexread-onlycurrentIndex definition for the pmc2002CtrlclientAccessTermLoop table
1.3.6.1.4.1.20044.52.6.2.26.1.2Columnpmc2002CtrlclientAccessTermLoopPortnread-writecurrentClient Terminal Loopback :This OID operates a Client Terminal Loopback, looping client input signal on the client output port. The loop is located on the line …
1.3.6.1.4.1.20044.52.6.2.52Tablepmc2002CtrlprotocolTablenot-accessiblecurrentList of pmc2002Ctrlprotocol Article
1.3.6.1.4.1.20044.52.6.2.52.1Rowpmc2002CtrlprotocolEntrynot-accessiblecurrentRow definition for the pmc2002Ctrlprotocol table
1.3.6.1.4.1.20044.52.6.2.52.1.1Columnpmc2002CtrlprotocolIndexread-onlycurrentIndex definition for the pmc2002Ctrlprotocol table
1.3.6.1.4.1.20044.52.6.2.52.1.2Columnpmc2002CtrlprotocolPortnread-writecurrentProtocol used for client port: This OID sets the protocol of the Client port.
1.3.6.1.4.1.20044.52.6.2.271Tablepmc2002CtrlclientResetAllCountTablenot-accessiblecurrentList of pmc2002CtrlclientResetAllCount Article
1.3.6.1.4.1.20044.52.6.2.271.1Rowpmc2002CtrlclientResetAllCountEntrynot-accessiblecurrentRow definition for the pmc2002CtrlclientResetAllCount table
1.3.6.1.4.1.20044.52.6.2.271.1.1Columnpmc2002CtrlclientResetAllCountIndexread-onlycurrentIndex definition for the pmc2002CtrlclientResetAllCount table
1.3.6.1.4.1.20044.52.6.2.271.1.2Columnpmc2002CtrlclientResetAllCountsPortnread-writecurrentClient Counters Reset :This OID resets every counter on the client port <Help> This control operates a reset on the statistics current ,previous and history cl…
1.3.6.1.4.1.20044.52.6.3Nodepmc2002CtrlLine
1.3.6.1.4.1.20044.52.6.3.64Tablepmc2002CtrlcommAccessLoopTablenot-accessibledeprecatedList of pmc2002CtrlcommAccessLoop Article
1.3.6.1.4.1.20044.52.6.3.64.1Rowpmc2002CtrlcommAccessLoopEntrynot-accessibledeprecatedRow definition for the pmc2002CtrlcommAccessLoop table
1.3.6.1.4.1.20044.52.6.3.64.1.1Columnpmc2002CtrlcommAccessLoopIndexread-onlydeprecatedIndex definition for the pmc2002CtrlcommAccessLoop table
1.3.6.1.4.1.20044.52.6.3.64.1.2Columnpmc2002CtrlcommAccessLoopPortnread-writedeprecatedPM Full Access Loop Mode :This OID, when set, puts the module in common access loop back, looping the 10 Gb/s output signal on the 10 Gb/s input.
1.3.6.1.4.1.20044.52.6.3.66Tablepmc2002CtrllineLoopTablenot-accessiblecurrentList of pmc2002CtrllineLoop Article
1.3.6.1.4.1.20044.52.6.3.66.1Rowpmc2002CtrllineLoopEntrynot-accessiblecurrentRow definition for the pmc2002CtrllineLoop table
1.3.6.1.4.1.20044.52.6.3.66.1.1Columnpmc2002CtrllineLoopIndexread-onlycurrentIndex definition for the pmc2002CtrllineLoop table
1.3.6.1.4.1.20044.52.6.3.66.1.2Columnpmc2002CtrllineLoopPortnread-writecurrentLine Facility Loopback :This OID operates a Line Facility Loopback, looping line input signal on the line output port. The loop is located on the line transcei…
1.3.6.1.4.1.20044.52.6.3.67Tablepmc2002CtrlmsAisTablenot-accessiblecurrentList of pmc2002CtrlmsAis Article
1.3.6.1.4.1.20044.52.6.3.67.1Rowpmc2002CtrlmsAisEntrynot-accessiblecurrentRow definition for the pmc2002CtrlmsAis table
1.3.6.1.4.1.20044.52.6.3.67.1.1Columnpmc2002CtrlmsAisIndexread-onlycurrentIndex definition for the pmc2002CtrlmsAis table
1.3.6.1.4.1.20044.52.6.3.67.1.2Columnpmc2002CtrlmsAisPortnread-writecurrentInsert MS-AIS/L-AIS On Line Output :This OID, when set, inserts an MS-AIS/L-AIS in the outgoing STM-64/OC-192 signal.
1.3.6.1.4.1.20044.52.6.3.69Tablepmc2002CtrlfecDisableTablenot-accessiblecurrentList of pmc2002CtrlfecDisable Article
1.3.6.1.4.1.20044.52.6.3.69.1Rowpmc2002CtrlfecDisableEntrynot-accessiblecurrentRow definition for the pmc2002CtrlfecDisable table
1.3.6.1.4.1.20044.52.6.3.69.1.1Columnpmc2002CtrlfecDisableIndexread-onlycurrentIndex definition for the pmc2002CtrlfecDisable table
1.3.6.1.4.1.20044.52.6.3.69.1.2Columnpmc2002CtrlfecDisablePortnread-writecurrentFEC Disable :This OID disable the Forward Error Correction decoder on the line receive side <Help> This control disables the Forward Error Correction on the li…
1.3.6.1.4.1.20044.52.6.3.74Tablepmc2002CtrllineOosModeTablenot-accessiblecurrentList of pmc2002CtrllineOosMode Article
1.3.6.1.4.1.20044.52.6.3.74.1Rowpmc2002CtrllineOosModeEntrynot-accessiblecurrentRow definition for the pmc2002CtrllineOosMode table
1.3.6.1.4.1.20044.52.6.3.74.1.1Columnpmc2002CtrllineOosModeIndexread-onlycurrentIndex definition for the pmc2002CtrllineOosMode table
1.3.6.1.4.1.20044.52.6.3.74.1.2Columnpmc2002CtrllineOosModePortnread-writecurrentLine Port Out Of Service :This OID sets the line port Out Of Service <Help> This control defines the service state of the line port
1.3.6.1.4.1.20044.52.6.3.208Tablepmc2002CtrlxfpOnoffTablenot-accessiblecurrentList of pmc2002CtrlxfpOnoff Article
1.3.6.1.4.1.20044.52.6.3.208.1Rowpmc2002CtrlxfpOnoffEntrynot-accessiblecurrentRow definition for the pmc2002CtrlxfpOnoff table
1.3.6.1.4.1.20044.52.6.3.208.1.1Columnpmc2002CtrlxfpOnoffIndexread-onlycurrentIndex definition for the pmc2002CtrlxfpOnoff table
1.3.6.1.4.1.20044.52.6.3.208.1.2Columnpmc2002CtrlxfpOnoffPortnread-writecurrentXFP/OTX Optical Laser OFF :This OID switches off the XFP or the OTX <Help> This control defines the laser state of the line transceiver
1.3.6.1.4.1.20044.52.6.3.209Tablepmc2002CtrlxfpLineLoopTablenot-accessiblecurrentList of pmc2002CtrlxfpLineLoop Article
1.3.6.1.4.1.20044.52.6.3.209.1Rowpmc2002CtrlxfpLineLoopEntrynot-accessiblecurrentRow definition for the pmc2002CtrlxfpLineLoop table
1.3.6.1.4.1.20044.52.6.3.209.1.1Columnpmc2002CtrlxfpLineLoopIndexread-onlycurrentIndex definition for the pmc2002CtrlxfpLineLoop table
1.3.6.1.4.1.20044.52.6.3.209.1.2Columnpmc2002CtrlxfpLineLoopPortnread-writecurrentLine XFP/OTX Loop :This OID operates a line loopback on the line XFP or the OTX <Help> This control defines the line loop back of the line transceiver
1.3.6.1.4.1.20044.52.6.3.210Tablepmc2002CtrlxfpLineXfiLoopTablenot-accessiblecurrentList of pmc2002CtrlxfpLineXfiLoop Article
1.3.6.1.4.1.20044.52.6.3.210.1Rowpmc2002CtrlxfpLineXfiLoopEntrynot-accessiblecurrentRow definition for the pmc2002CtrlxfpLineXfiLoop table
1.3.6.1.4.1.20044.52.6.3.210.1.1Columnpmc2002CtrlxfpLineXfiLoopIndexread-onlycurrentIndex definition for the pmc2002CtrlxfpLineXfiLoop table
1.3.6.1.4.1.20044.52.6.3.210.1.2Columnpmc2002CtrlxfpLineXfiLoopPortnread-writecurrentLine XFP/OTX XFI Loop :This OID operates a XFI loopback on the line XFP or the OTX <Help> This control defines the XFI loop back of the line transceiver
1.3.6.1.4.1.20044.52.6.3.212Tablepmc2002CtrllineTunableChannelTablenot-accessiblecurrentList of pmc2002CtrllineTunableChannel Article
1.3.6.1.4.1.20044.52.6.3.212.1Rowpmc2002CtrllineTunableChannelEntrynot-accessiblecurrentRow definition for the pmc2002CtrllineTunableChannel table
1.3.6.1.4.1.20044.52.6.3.212.1.1Columnpmc2002CtrllineTunableChannelIndexread-onlycurrentIndex definition for the pmc2002CtrllineTunableChannel table
1.3.6.1.4.1.20044.52.6.3.212.1.2Columnpmc2002CtrllineTunableChannelPortnread-writecurrentITU Channel :This OID selects the ITU channel of the Line OTX TLH Laser <Help> This control defines the ITU channel of the Line OTX TLH Laser
1.3.6.1.4.1.20044.52.6.3.213Tablepmc2002CtrllinePhotodiodeModeTablenot-accessiblecurrentList of pmc2002CtrllinePhotodiodeMode Article
1.3.6.1.4.1.20044.52.6.3.213.1Rowpmc2002CtrllinePhotodiodeModeEntrynot-accessiblecurrentRow definition for the pmc2002CtrllinePhotodiodeMode table
1.3.6.1.4.1.20044.52.6.3.213.1.1Columnpmc2002CtrllinePhotodiodeModeIndexread-onlycurrentIndex definition for the pmc2002CtrllinePhotodiodeMode table
1.3.6.1.4.1.20044.52.6.3.213.1.2Columnpmc2002CtrllinePhotodiodeModePortnread-writecurrentOTX TLH Rx Sens. Mode :This OID defines the Rx sensiblity mode of the Line OTX TLH <Help> This control defines the receiver sensibility mode of the Line OTX TL…
1.3.6.1.4.1.20044.52.6.3.214Tablepmc2002CtrllinePhotodiodeValueTablenot-accessiblecurrentList of pmc2002CtrllinePhotodiodeValue Article
1.3.6.1.4.1.20044.52.6.3.214.1Rowpmc2002CtrllinePhotodiodeValueEntrynot-accessiblecurrentRow definition for the pmc2002CtrllinePhotodiodeValue table
1.3.6.1.4.1.20044.52.6.3.214.1.1Columnpmc2002CtrllinePhotodiodeValueIndexread-onlycurrentIndex definition for the pmc2002CtrllinePhotodiodeValue table
1.3.6.1.4.1.20044.52.6.3.214.1.2Columnpmc2002CtrllinePhotodiodeValuePortnread-writecurrentOTX TLH Rx Sensibility :This OID sets the Rx sensibility of the Line OTX TLH (custom mode only) <Help> This control defines the receiver sensibility value (onl…
1.3.6.1.4.1.20044.52.6.3.215Tablepmc2002CtrllinePowerLaserTablenot-accessiblecurrentList of pmc2002CtrllinePowerLaser Article
1.3.6.1.4.1.20044.52.6.3.215.1Rowpmc2002CtrllinePowerLaserEntrynot-accessiblecurrentRow definition for the pmc2002CtrllinePowerLaser table
1.3.6.1.4.1.20044.52.6.3.215.1.1Columnpmc2002CtrllinePowerLaserIndexread-onlycurrentIndex definition for the pmc2002CtrllinePowerLaser table
1.3.6.1.4.1.20044.52.6.3.215.1.2Columnpmc2002CtrllinePowerLaserPortnread-writecurrentLaser Output Power [3-5] :This OID sets the output power value on the laser of the Line OTX TLH (AV=Power*10+158) (Unit = dBm) <Help> This control defines the …
1.3.6.1.4.1.20044.52.6.3.216Tablepmc2002CtrlotxVlhResetTablenot-accessiblecurrentList of pmc2002CtrlotxVlhReset Article
1.3.6.1.4.1.20044.52.6.3.216.1Rowpmc2002CtrlotxVlhResetEntrynot-accessiblecurrentRow definition for the pmc2002CtrlotxVlhReset table
1.3.6.1.4.1.20044.52.6.3.216.1.1Columnpmc2002CtrlotxVlhResetIndexread-onlycurrentIndex definition for the pmc2002CtrlotxVlhReset table
1.3.6.1.4.1.20044.52.6.3.216.1.2Columnpmc2002CtrlotxVlhResetPortnread-writecurrentOTX-VLH Reset :This OID resets the OTX-VLH module <Help> This control resets the OTX-VLH and its parameters
1.3.6.1.4.1.20044.52.6.3.218Tablepmc2002CtrllineLoopTransceiverTablenot-accessiblecurrentList of pmc2002CtrllineLoopTransceiver Article
1.3.6.1.4.1.20044.52.6.3.218.1Rowpmc2002CtrllineLoopTransceiverEntrynot-accessiblecurrentRow definition for the pmc2002CtrllineLoopTransceiver table
1.3.6.1.4.1.20044.52.6.3.218.1.1Columnpmc2002CtrllineLoopTransceiverIndexread-onlycurrentIndex definition for the pmc2002CtrllineLoopTransceiver table
1.3.6.1.4.1.20044.52.6.3.218.1.2Columnpmc2002CtrllineLoopTransceiverPortnread-writecurrentLine Terminal Loopback :This OID operates a Line Terminal Loopback, looping line input signal on the line output port. The loop is located on all client transc…
1.3.6.1.4.1.20044.52.6.3.335Tablepmc2002CtrllineResetAllCountTablenot-accessiblecurrentList of pmc2002CtrllineResetAllCount Article
1.3.6.1.4.1.20044.52.6.3.335.1Rowpmc2002CtrllineResetAllCountEntrynot-accessiblecurrentRow definition for the pmc2002CtrllineResetAllCount table
1.3.6.1.4.1.20044.52.6.3.335.1.1Columnpmc2002CtrllineResetAllCountIndexread-onlycurrentIndex definition for the pmc2002CtrllineResetAllCount table
1.3.6.1.4.1.20044.52.6.3.335.1.2Columnpmc2002CtrllineResetAllCountsPortnread-writecurrentLine Counters Reset :This OID resets every counter on the line port <Help> This control operates a reset on the statistics current ,previous and history line p…
1.3.6.1.4.1.20044.52.7Nodepmc2002ri
1.3.6.1.4.1.20044.52.7.1Nodepmc2002riTable
1.3.6.1.4.1.20044.52.7.1.1Tablepmc2002RinvClientTablenot-accessiblecurrentList of the Clients on the selected module
1.3.6.1.4.1.20044.52.7.1.1.1Rowpmc2002RinvClientEntrynot-accessiblecurrentRow definition for the Client table
1.3.6.1.4.1.20044.52.7.1.1.1.1Columnpmc2002RinvClientIndexread-onlycurrentIndex for Client table
1.3.6.1.4.1.20044.52.7.1.1.1.2Columnpmc2002RinvClientread-onlycurrentInventory for the Client: This OID contains the inventory for the Client Port
1.3.6.1.4.1.20044.52.7.1.2Tablepmc2002RinvLineTablenot-accessiblecurrentList of the Lines on the selected module
1.3.6.1.4.1.20044.52.7.1.2.1Rowpmc2002RinvLineEntrynot-accessiblecurrentRow definition for the Line table
1.3.6.1.4.1.20044.52.7.1.2.1.1Columnpmc2002RinvLineIndexread-onlycurrentIndex for XFP table
1.3.6.1.4.1.20044.52.7.1.2.1.2Columnpmc2002RinvxfpLineread-onlycurrentInventory for the Line: This OID contains the inventory for the Line
1.3.6.1.4.1.20044.52.7.2Scalarpmc2002RinvReloadInventoryread-writecurrentReload the inventory: This OID triggers an inventory reload.
1.3.6.1.4.1.20044.52.7.3Scalarpmc2002RinvHwPlatformread-onlycurrentHW platform description: This OID contains the description of the Hardware platform.
1.3.6.1.4.1.20044.52.7.4Scalarpmc2002RinvModulePlatformread-onlycurrentModule platform description: This OID contains the description of the Module.
1.3.6.1.4.1.20044.52.7.5Scalarpmc2002RinvSwPlatformread-onlycurrentSW platform description: This OID contains the description of the Software platform.
1.3.6.1.4.1.20044.52.7.6Scalarpmc2002RinvGwPlatformread-onlycurrentGW platform desciption: This OID contains the description of the Gateware platform.
1.3.6.1.4.1.20044.52.8Nodepmc2002download
1.3.6.1.4.1.20044.52.8.1Nodepmc2002DwlOther
1.3.6.1.4.1.20044.52.8.1.0Nodepmc2002DwlrestartProcess
1.3.6.1.4.1.20044.52.8.1.0.1Scalarpmc2002DwlWarmRestartProcessedread-onlycurrentWarm Restart :This OID indicates that the module last restart was a Warm RESTART
1.3.6.1.4.1.20044.52.8.1.0.2Scalarpmc2002DwlColdRestartProcessedread-onlycurrentCold Restart :This OID indicates that the module last restart was a Cold RESTART
1.3.6.1.4.1.20044.52.8.1.1Nodepmc2002DwlswBanksUsed
1.3.6.1.4.1.20044.52.8.1.1.1Scalarpmc2002DwlSwBank1Usedread-onlycurrentSW bank 1 active :This OID indicates the module is working on SW bank 1 <Help> This status indicates if the SW bank 1 is active or standby
1.3.6.1.4.1.20044.52.8.1.1.2Scalarpmc2002DwlSwBank2Usedread-onlycurrentSW bank 2 active :This OID indicates the module is working on SW bank 2 <Help> This status indicates if the SW bank 2 is active or standby
1.3.6.1.4.1.20044.52.8.1.1.5Scalarpmc2002DwlSwBank1Notemptyread-onlycurrentSW bank 1 loaded :This OID indicates a software is loaded in SW bank 1 <Help> This status indicates if the SW bank 1 contains SW package
1.3.6.1.4.1.20044.52.8.1.1.6Scalarpmc2002DwlSwBank2Notemptyread-onlycurrentSW bank 2 loaded :This OID indicates a software is loaded in SW bank 2 <Help> This status indicates if the SW bank 2 contains SW package
1.3.6.1.4.1.20044.52.8.1.2Nodepmc2002DwlgwBanksUsed
1.3.6.1.4.1.20044.52.8.1.2.1Scalarpmc2002DwlGwBank1Usedread-onlycurrentGW bank 1 active :This OID indicates the module is working on GW bank 1 <Help> This status indicates if the GW bank 1 is active or standby
1.3.6.1.4.1.20044.52.8.1.2.2Scalarpmc2002DwlGwBank2Usedread-onlydeprecatedGW bank 2 active :This OID indicates the module is working on GW bank 2
1.3.6.1.4.1.20044.52.8.1.2.3Scalarpmc2002DwlGwBank3Usedread-onlycurrentGW bank 3 active :This OID indicates the module is working on GW bank 3 <Help> This status indicates if the GW bank 3 is active or standby
1.3.6.1.4.1.20044.52.8.1.2.4Scalarpmc2002DwlGwBank4Usedread-onlydeprecatedGW bank 4 active :This OID indicates the module is working on GW bank 4
1.3.6.1.4.1.20044.52.8.1.2.5Scalarpmc2002DwlGwBank1Notemptyread-onlycurrentGW bank 1 loaded :This OID indicates a gateware is loaded in GW bank 1 <Help> This status indicates if the GW bank 1 contains GW package
1.3.6.1.4.1.20044.52.8.1.2.6Scalarpmc2002DwlGwBank2Notemptyread-onlydeprecatedGW bank 2 loaded :This OID indicates a gateware is loaded in GW bank 2
1.3.6.1.4.1.20044.52.8.1.2.7Scalarpmc2002DwlGwBank3Notemptyread-onlycurrentGW bank 3 loaded :This OID indicates a gateware is loaded in GW bank 3 <Help> This status indicates if the GW bank 3 contains GW package
1.3.6.1.4.1.20044.52.8.1.2.8Scalarpmc2002DwlGwBank4Notemptyread-onlydeprecatedGW bank 4 loaded :This OID indicates a gateware is loaded in GW bank 4
1.3.6.1.4.1.20044.52.8.2Nodepmc2002DwlClient
1.3.6.1.4.1.20044.52.8.3Nodepmc2002DwlLine
1.3.6.1.4.1.20044.52.10Nodepmc2002Config
1.3.6.1.4.1.20044.52.10.1Nodepmc2002CfgAccessCAisCsf
1.3.6.1.4.1.20044.52.10.1.1Tablepmc2002CfgClientcaiscsfTablenot-accessiblecurrentList of Article
1.3.6.1.4.1.20044.52.10.1.1.1Rowpmc2002CfgClientcaiscsfEntrynot-accessiblecurrentRow definition for the accessCAisCsf table
1.3.6.1.4.1.20044.52.10.1.1.1.1Columnpmc2002CfgClientcaiscsfIndexread-onlycurrentIndex definition for the clientcaiscsf table
1.3.6.1.4.1.20044.52.10.1.1.1.3Columnpmc2002CfgCAisModePortnread-writecurrentCAIS mode on Client Port :This register enables/disables port laser shutdown on CAIS insertion condition
1.3.6.1.4.1.20044.52.10.1.1.1.9Columnpmc2002CfgUpAccessioAlmPortnread-writecurrentCSF contributors on Client Port :This register configures the contributors to upstream CSF insertion on the port.
1.3.6.1.4.1.20044.52.10.1.1.1.10Columnpmc2002CfgUpMapperDeAlmPortnread-writecurrentCSF contributors on Client Port :This register configures the contributors to upstream CSF insertion on the port.
1.3.6.1.4.1.20044.52.10.1.1.1.17Columnpmc2002CfgDownAccessioAlmPortnread-writecurrentCAIS contributors on Client Port :This register configures the contributors to downstream CAIS insertion on port.
1.3.6.1.4.1.20044.52.10.1.1.1.18Columnpmc2002CfgDownMapperDeAlmPortnread-writecurrentCAIS contributors on Client Port :This register configures the contributors to downstream CAIS insertion on port.
1.3.6.1.4.1.20044.52.10.1.1.1.19Columnpmc2002CfgDownDfrmAlmPortnread-writecurrentCAIS contributors on Client Port :This register configures the contributors to downstream CAIS insertion on port.
1.3.6.1.4.1.20044.52.10.1.1.1.20Columnpmc2002CfgDownLineSyncAlarmsPortnread-writedeprecatedCAIS contributors on Client Port :This register configures the contributors to downstream CAIS insertion on port.
1.3.6.1.4.1.20044.52.10.2Nodepmc2002CfgStartup
1.3.6.1.4.1.20044.52.10.2.1Tablepmc2002CfgClientStartupTablenot-accessiblecurrentList of Article
1.3.6.1.4.1.20044.52.10.2.1.1Rowpmc2002CfgClientStartupEntrynot-accessiblecurrentRow definition for the startup table
1.3.6.1.4.1.20044.52.10.2.1.1.1Columnpmc2002CfgClientStartupIndexread-onlycurrentIndex definition for the clientStartup table
1.3.6.1.4.1.20044.52.10.2.1.1.3Columnpmc2002CfgSystConfPortPortnread-writecurrentDefault Settings on Client Port :This register configures the default initialisation settings on the port.
1.3.6.1.4.1.20044.52.10.2.1.1.4Columnpmc2002CfgNetConfPortPortnread-writecurrentDefault Protocol on Client Port :This register configures the default initialisation protocol on the port.
1.3.6.1.4.1.20044.52.10.2.1.1.6Columnpmc2002CfgPortsOptionsPortnread-writecurrentDefault Options on Client Port :This register configures the default options on the client port
1.3.6.1.4.1.20044.52.10.2.2Nodepmc2002tablelineStartup
1.3.6.1.4.1.20044.52.10.2.2.2Scalarpmc2002CfgsynthTransLine1read-writecurrentDefault Settings on Line 1 :This register configures the default initialisation settings on Line port 1.
1.3.6.1.4.1.20044.52.10.2.2.3Scalarpmc2002CfgnetConfModread-writecurrentDefault Protocol on Module :This register configures the default initialisation protocol on the module.
1.3.6.1.4.1.20044.52.10.2.2.5Scalarpmc2002CfglineOptions1read-writecurrentDefault Options on Active Line Port :This register configures the default options on the active line port
1.3.6.1.4.1.20044.52.10.2.2.6Scalarpmc2002CfgsystTransLine2read-writecurrentDefault Settings on Line 2 :This register configures the default initialisation settings on Line port 2.
1.3.6.1.4.1.20044.52.10.2.2.7Scalarpmc2002CfglineSelectionread-writecurrentDefault Settings of active line :This register configures the start up active line.
1.3.6.1.4.1.20044.52.10.2.3Tablepmc2002CfgXfpTablenot-accessiblecurrentList of Article
1.3.6.1.4.1.20044.52.10.2.3.1Rowpmc2002CfgXfpEntrynot-accessiblecurrentRow definition for the startup table
1.3.6.1.4.1.20044.52.10.2.3.1.1Columnpmc2002CfgXfpIndexread-onlycurrentIndex definition for the xfp table
1.3.6.1.4.1.20044.52.10.2.3.1.3Columnpmc2002CfgSystConfXfpPortnread-writecurrentDefault settings on XFP Port :This register configures the default initialisation settings on XFP port.
1.3.6.1.4.1.20044.52.10.2.3.1.4Columnpmc2002CfgDataRateConfXfpPortnread-writedeprecated:Reserved
1.3.6.1.4.1.20044.52.10.2.4Tablepmc2002CfgOtxtlhTablenot-accessiblecurrentList of Article
1.3.6.1.4.1.20044.52.10.2.4.1Rowpmc2002CfgOtxtlhEntrynot-accessiblecurrentRow definition for the startup table
1.3.6.1.4.1.20044.52.10.2.4.1.1Columnpmc2002CfgOtxtlhIndexread-onlycurrentIndex definition for the otxtlh table
1.3.6.1.4.1.20044.52.10.2.4.1.4Columnpmc2002CfgLineDitherRatePortnread-writecurrentDefault Line OTX TLH FM amplitude :This register configures the start-up width of the frequency modulation of the Line OTX TLH
1.3.6.1.4.1.20044.52.10.2.4.1.5Columnpmc2002CfgLineDitherFhzPortnread-writecurrentDefault Line OTX TLH FM frequency :This register configures the start-up frequency of the frequency modulation of the Line OTX TLH
1.3.6.1.4.1.20044.52.10.2.4.1.6Columnpmc2002CfgLinePwrLaserPortnread-writecurrentDefaut Line OTX TLH output Power :This register configures the start-up output power of the Line OTX TLH (Unit = dBm)
1.3.6.1.4.1.20044.52.10.2.4.1.9Columnpmc2002CfgFPortnread-writecurrentDefault Line OTX TLH lowest Freq :This register configures the start-up lowest frequency supported on the Line OTX TLH
1.3.6.1.4.1.20044.52.10.2.4.1.10Columnpmc2002CfgReservedPortnread-writedeprecated:
1.3.6.1.4.1.20044.52.10.2.4.1.11Columnpmc2002CfgLinePhotodiodeModePortnread-writecurrentDefault Line OTX TLH APD mode :This register configures the start-up APD mode of the Line OTX TLH
1.3.6.1.4.1.20044.52.10.2.4.1.12Columnpmc2002CfgLinePhotodiodeValuePortnread-writecurrentDefault Line OTX TLH APD atten. :This register configures the start-up APD attenuation on the Line OTX TLH
1.3.6.1.4.1.20044.52.10.2.5Tablepmc2002CfgOtxtlhCommonTablenot-accessiblecurrentList of Article
1.3.6.1.4.1.20044.52.10.2.5.1Rowpmc2002CfgOtxtlhCommonEntrynot-accessiblecurrentRow definition for the startup table
1.3.6.1.4.1.20044.52.10.2.5.1.1Columnpmc2002CfgOtxtlhCommonIndexread-onlycurrentIndex definition for the otxtlhCommon table
1.3.6.1.4.1.20044.52.10.2.5.1.7Columnpmc2002CfgLineFCurrentPortnread-writecurrentDefault Line OTX TLH Channel :This register configures the start-up laser channel of the Line OTX TLH
1.3.6.1.4.1.20044.52.10.2.5.1.8Columnpmc2002CfgLineGridCurrentPortnread-writecurrentDefault Line OTX TLH Grid :This register configures the start-up laser grid of the Line OTX TLH
1.3.6.1.4.1.20044.52.10.3Nodepmc2002CfgLabels
1.3.6.1.4.1.20044.52.10.3.1Tablepmc2002CfgLabelclientTablenot-accessiblecurrentList of Article
1.3.6.1.4.1.20044.52.10.3.1.1Rowpmc2002CfgLabelclientEntrynot-accessiblecurrentRow definition for the labels table
1.3.6.1.4.1.20044.52.10.3.1.1.1Columnpmc2002CfgLabelclientIndexread-onlycurrentIndex definition for the labelclient table
1.3.6.1.4.1.20044.52.10.3.1.1.3Columnpmc2002CfgLabelclientPortnread-writecurrentDefault settings on the label of the Ports :These registers configures the default initialisation settings of the labels of the ports.
1.3.6.1.4.1.20044.52.10.3.2Tablepmc2002CfgLabellineTablenot-accessiblecurrentList of Article
1.3.6.1.4.1.20044.52.10.3.2.1Rowpmc2002CfgLabellineEntrynot-accessiblecurrentRow definition for the labels table
1.3.6.1.4.1.20044.52.10.3.2.1.1Columnpmc2002CfgLabellineIndexread-onlycurrentIndex definition for the labelline table
1.3.6.1.4.1.20044.52.10.3.2.1.3Columnpmc2002CfgLabellinePortnread-writecurrentDefault settings on the label of the lines :These registers configures the default initialisation settings of the labels of the lines.
1.3.6.1.4.1.20044.52.10.4Nodepmc2002CfgOther
1.3.6.1.4.1.20044.52.10.4.1Nodepmc2002tablemoduleOther
1.3.6.1.4.1.20044.52.10.4.1.2Scalarpmc2002Cfgmoderead-writecurrentDefault settings on Module :This register selects the DCC configuration of the PM
1.3.6.1.4.1.20044.52.10.5Nodepmc2002CfgStartuptablefive
1.3.6.1.4.1.20044.52.10.5.1Tablepmc2002CfgOtxtlhcapabilitiesTablenot-accessiblecurrentList of Article
1.3.6.1.4.1.20044.52.10.5.1.1Rowpmc2002CfgOtxtlhcapabilitiesEntrynot-accessiblecurrentRow definition for the startuptablefive table
1.3.6.1.4.1.20044.52.10.5.1.1.1Columnpmc2002CfgOtxtlhcapabilitiesIndexread-onlycurrentIndex definition for the otxtlhcapabilities table
1.3.6.1.4.1.20044.52.10.5.1.1.3Columnpmc2002CfgComponentTypePortnread-onlycurrentComponent parameters :This OID defines the component parameters
1.3.6.1.4.1.20044.52.10.5.1.1.4Columnpmc2002CfgMiscellaneousPortnread-onlycurrentMiscellaneous default settings :This OID defines the miscellaneous parameters
1.3.6.1.4.1.20044.52.10.5.1.1.5Columnpmc2002CfgFirstChannelPortnread-onlycurrentNumber of the first channel of the component :This OID defines the first channel number of the PM
1.3.6.1.4.1.20044.52.10.5.1.1.6Columnpmc2002CfgLastChannelPortnread-onlycurrentNumber of the last channel of the component :This OID defines the last channel number of the PM
1.3.6.1.4.1.20044.52.10.5.1.1.7Columnpmc2002CfgGridPortnread-onlycurrentGrid value of the component :This OID defines the grid of the PM
1.3.6.1.4.1.20044.52.10.257Scalarpmc2002CfgWriteConfigurationread-writecurrentWrite configuration to module:This OID writes the complete configuration to the module
1.3.6.1.4.1.20044.52.11Nodepmc2002traps
1.3.6.1.4.1.20044.52.11.1Scalarpmc2002trapBoardNumberread-onlycurrentLast module which generates a trap
1.3.6.1.4.1.20044.52.11.2Scalarpmc2002trapClientNumberread-onlycurrentLast module which generates a trap
1.3.6.1.4.1.20044.52.11.3Scalarpmc2002trapLineNumberread-onlycurrentLast module which generates a trap
1.3.6.1.4.1.20044.52.11.30Notificationpmc2002LineTrapNotUrgentGoesOncurrentNot urgent Line default is activated
1.3.6.1.4.1.20044.52.11.31Notificationpmc2002LineTrapNotUrgentGoesOffcurrentNot urgent Line default disappeared
1.3.6.1.4.1.20044.52.11.32Notificationpmc2002LineTrapUrgentGoesOncurrentUrgent Line default is activated
1.3.6.1.4.1.20044.52.11.33Notificationpmc2002LineTrapUrgentGoesOffcurrentUrgent Line default disappeared
1.3.6.1.4.1.20044.52.11.34Notificationpmc2002LineTrapCritGoesOncurrentCritical Line default is activated
1.3.6.1.4.1.20044.52.11.35Notificationpmc2002LineTrapCritGoesOffcurrentCritical Line default disappeared
1.3.6.1.4.1.20044.52.11.40Notificationpmc2002ClientTrapNotUrgentGoesOncurrentNot urgent client default is activated
1.3.6.1.4.1.20044.52.11.41Notificationpmc2002ClientTrapNotUrgentGoesOffcurrentNot urgent client default disappeared
1.3.6.1.4.1.20044.52.11.42Notificationpmc2002ClientTrapUrgentGoesOncurrentUrgent client default is activated
1.3.6.1.4.1.20044.52.11.43Notificationpmc2002ClientTrapUrgentGoesOffcurrentUrgent client default disappeared
1.3.6.1.4.1.20044.52.11.44Notificationpmc2002ClientTrapCritGoesOncurrentCritical client default is activated
1.3.6.1.4.1.20044.52.11.45Notificationpmc2002ClientTrapCritGoesOffcurrentCritical client default disappeared
1.3.6.1.4.1.20044.52.11.50Notificationpmc2002PowerTrapUrgentGoesOncurrentUrgent power supply default is activated
1.3.6.1.4.1.20044.52.11.51Notificationpmc2002PowerTrapUrgentGoesOffcurrentUrgent power supply default disappeared
1.3.6.1.4.1.20044.52.12Nodepmc2002Monitoring
1.3.6.1.4.1.20044.52.12.1Nodepmc2002MonOther
1.3.6.1.4.1.20044.52.12.1.1Nodepmc2002MonSync
1.3.6.1.4.1.20044.52.12.1.1.257Scalarpmc2002PerfEnableread-writecurrentPerf. Mon. Enable :This OID enables the Performance Monitoring application
1.3.6.1.4.1.20044.52.12.1.1.259Scalarpmc2002Perf15minSyncread-writecurrentPerf. Mon. 15-min sync. :This OID must be used in external synchronisation mode only to send a 15-min synchronisation command
1.3.6.1.4.1.20044.52.12.1.1.260Scalarpmc2002Perf24hSyncread-writecurrentPerf. Mon. 24-hours sync. :This OID must be used in external synchronisation mode only to send a 24-hours synchronisation command
1.3.6.1.4.1.20044.52.12.1.2Nodepmc2002MonTimeStamp
1.3.6.1.4.1.20044.52.12.1.2.1Scalarpmc2002Perf15MinShortread-writecurrent15-min period is short :This OID indicates that the 15-min period lasts less than 890 seconds
1.3.6.1.4.1.20044.52.12.1.2.2Scalarpmc2002Perf15MinLongread-writecurrent15-min period is long :This OID indicates that the 15-min period lasts more than 910 seconds
1.3.6.1.4.1.20044.52.12.1.2.5Scalarpmc2002Perf24HoursShortread-writecurrent24-hours period is short :This OID indicates that 24-hours period lasts less than 86390 seconds
1.3.6.1.4.1.20044.52.12.1.2.6Scalarpmc2002Perf24HoursLongread-writecurrent24-hours period is long :This OID indicates that 24-hours period lasts more than 86410 seconds
1.3.6.1.4.1.20044.52.12.1.2.7Scalarpmc2002PerfCurrent15MinElapsedTimeread-writecurrentCurrent 15min period Elapsed Time :This OID gives the number of seconds elapsed in the current 15-minutes period
1.3.6.1.4.1.20044.52.12.1.2.8Scalarpmc2002PerfCurrent24HoursElapsedTimeread-writecurrentCurrent 24hours period Elapsed Time :This OID gives the number of seconds elapsed in the current 24-hours period
1.3.6.1.4.1.20044.52.12.2Nodepmc2002MonClient
1.3.6.1.4.1.20044.52.12.2.16Tablepmc2002PerfTelecomClientCurrent15StatTablenot-accessiblecurrentList of pmc2002PerfTelecomClientCurrent15Stat Article
1.3.6.1.4.1.20044.52.12.2.16.1Rowpmc2002PerfTelecomClientCurrent15StatEntrynot-accessiblecurrentRow definition for the pmc2002PerfTelecomClientCurrent15Stat table
1.3.6.1.4.1.20044.52.12.2.16.1.1Columnpmc2002PerfTelecomClientCurrent15StatIndexread-onlycurrentIndex definition for the pmc2002PerfTelecomClientCurrent15Stat table
1.3.6.1.4.1.20044.52.12.2.16.1.2Columnpmc2002PerfTelecomClientCurrent15StatInvCvPortnread-onlycurrentCurrent 15-min CV counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid
1.3.6.1.4.1.20044.52.12.2.16.1.3Columnpmc2002PerfTelecomClientCurrent15StatCvValuePortnread-onlycurrentCurrent 15-min CV counter :This OID gives the current 15-min Coding Violation counter value
1.3.6.1.4.1.20044.52.12.2.16.1.4Columnpmc2002PerfTelecomClientCurrent15StatInvEsPortnread-onlycurrentCurrent 15-min ES counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid
1.3.6.1.4.1.20044.52.12.2.16.1.5Columnpmc2002PerfTelecomClientCurrent15StatEsValuePortnread-onlycurrentCurrent 15-min ES counter :This OID gives the current 15-min Errored Second counter value
1.3.6.1.4.1.20044.52.12.2.16.1.6Columnpmc2002PerfTelecomClientCurrent15StatInvSesPortnread-onlycurrentCurrent 15-min SES counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid
1.3.6.1.4.1.20044.52.12.2.16.1.7Columnpmc2002PerfTelecomClientCurrent15StatSesValuePortnread-onlycurrentCurrent 15-min SES counter :This OID gives the current 15-min severely Errored Second counter value
1.3.6.1.4.1.20044.52.12.2.16.1.8Columnpmc2002PerfTelecomClientCurrent15StatInvSefsPortnread-onlycurrentCurrent 15-min SEFS counter inv. :This OID indicates that the current 15-min severely Errored Framing Second counter is invalid
1.3.6.1.4.1.20044.52.12.2.16.1.9Columnpmc2002PerfTelecomClientCurrent15StatSefsValuePortnread-onlycurrentCurrent 15-min SEFS counter :This OID gives the current 15-min severely Errored Framing Second counter value
1.3.6.1.4.1.20044.52.12.2.16.1.10Columnpmc2002PerfTelecomClientCurrent15StatInvUasPortnread-onlycurrentCurrent 15-min UAS counter inv. :This OID indicates that the current 15-min UnAvailable Second counter is invalid
1.3.6.1.4.1.20044.52.12.2.16.1.11Columnpmc2002PerfTelecomClientCurrent15StatUasValuePortnread-onlycurrentCurrent 15-min UAS counter :This OID gives the current 15-min UnAvailable Second counter value
1.3.6.1.4.1.20044.52.12.2.24Tablepmc2002PerfTelecomClientPast15StatHistoryPort1Tablenot-accessiblecurrentList of pmc2002PerfTelecomClientPast15StatHistory Article
1.3.6.1.4.1.20044.52.12.2.24.1Rowpmc2002PerfTelecomClientPast15StatHistoryPort1Entrynot-accessiblecurrentRow definition for the pmc2002PerfTelecomClientPast15StatHistory table
1.3.6.1.4.1.20044.52.12.2.24.1.1Columnpmc2002PerfTelecomClientPast15StatHistoryPort1Indexread-onlycurrentIndex definition for the pmc2002PerfTelecomClientPast15StatHistory table
1.3.6.1.4.1.20044.52.12.2.24.1.2Columnpmc2002PerfTelecomClientPast15StatHistoryInvCvPort1read-onlycurrentPrevious 15-min CV counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid
1.3.6.1.4.1.20044.52.12.2.24.1.3Columnpmc2002PerfTelecomClientPast15StatHistoryCvValuePort1read-onlycurrentPrevious 15-min CV counter :This OID gives the previous 15-min Coding Violation counter value
1.3.6.1.4.1.20044.52.12.2.24.1.4Columnpmc2002PerfTelecomClientPast15StatHistoryInvEsPort1read-onlycurrentPrevious 15-min ES counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid
1.3.6.1.4.1.20044.52.12.2.24.1.5Columnpmc2002PerfTelecomClientPast15StatHistoryEsValuePort1read-onlycurrentPrevious 15-min ES counter :This OID gives the previous 15-min Errored Second counter value
1.3.6.1.4.1.20044.52.12.2.24.1.6Columnpmc2002PerfTelecomClientPast15StatHistoryInvSesPort1read-onlycurrentPrevious 15-min SES counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid
1.3.6.1.4.1.20044.52.12.2.24.1.7Columnpmc2002PerfTelecomClientPast15StatHistorySesValuePort1read-onlycurrentPrevious 15-min SES counter :This OID gives the previous 15-min severely Errored Second counter value
1.3.6.1.4.1.20044.52.12.2.24.1.8Columnpmc2002PerfTelecomClientPast15StatHistoryInvSefsPort1read-onlycurrentPrevious 15-min SEFS counter inv. :This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid
1.3.6.1.4.1.20044.52.12.2.24.1.9Columnpmc2002PerfTelecomClientPast15StatHistorySefsValuePort1read-onlycurrentPrevious 15-min SEFS counter :This OID gives the previous 15-min severely Errored Framing Second counter value
1.3.6.1.4.1.20044.52.12.2.24.1.10Columnpmc2002PerfTelecomClientPast15StatHistoryInvUasPort1read-onlycurrentPrevious 15-min UAS counter inv. :This OID indicates that the previous 15-min UnAvailable Second counter is invalid
1.3.6.1.4.1.20044.52.12.2.24.1.11Columnpmc2002PerfTelecomClientPast15StatHistoryUasValuePort1read-onlycurrentPrevious 15-min UAS counter :This OID gives the previous 15-min UnAvailable Second counter value
1.3.6.1.4.1.20044.52.12.2.32Tablepmc2002PerfTelecomClientCurrent24StatTablenot-accessiblecurrentList of pmc2002PerfTelecomClientCurrent24Stat Article
1.3.6.1.4.1.20044.52.12.2.32.1Rowpmc2002PerfTelecomClientCurrent24StatEntrynot-accessiblecurrentRow definition for the pmc2002PerfTelecomClientCurrent24Stat table
1.3.6.1.4.1.20044.52.12.2.32.1.1Columnpmc2002PerfTelecomClientCurrent24StatIndexread-onlycurrentIndex definition for the pmc2002PerfTelecomClientCurrent24Stat table
1.3.6.1.4.1.20044.52.12.2.32.1.2Columnpmc2002PerfTelecomClientCurrent24StatInvCvPortnread-onlycurrentCurrent 24-hours CV counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid
1.3.6.1.4.1.20044.52.12.2.32.1.3Columnpmc2002PerfTelecomClientCurrent24StatCvValuePortnread-onlycurrentCurrent 24-hours CV counter :This OID gives the current 24-hours Coding Violation counter value
1.3.6.1.4.1.20044.52.12.2.32.1.4Columnpmc2002PerfTelecomClientCurrent24StatInvEsPortnread-onlycurrentCurrent 24-hours ES counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid
1.3.6.1.4.1.20044.52.12.2.32.1.5Columnpmc2002PerfTelecomClientCurrent24StatEsValuePortnread-onlycurrentCurrent 24-hours ES counter :This OID gives the current 24-hours Errored Second counter value
1.3.6.1.4.1.20044.52.12.2.32.1.6Columnpmc2002PerfTelecomClientCurrent24StatInvSesPortnread-onlycurrentCurrent 24-hours SES counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid
1.3.6.1.4.1.20044.52.12.2.32.1.7Columnpmc2002PerfTelecomClientCurrent24StatSesValuePortnread-onlycurrentCurrent 24-hours SES counter :This OID gives the current 24-hours severely Errored Second counter value
1.3.6.1.4.1.20044.52.12.2.32.1.8Columnpmc2002PerfTelecomClientCurrent24StatInvSefsPortnread-onlycurrentCurrent 24-hours SEFS counter inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid
1.3.6.1.4.1.20044.52.12.2.32.1.9Columnpmc2002PerfTelecomClientCurrent24StatSefsValuePortnread-onlycurrentCurrent 24-hours SEFS counter :This OID gives the current 24-hours severely Errored Framing Second counter value
1.3.6.1.4.1.20044.52.12.2.32.1.10Columnpmc2002PerfTelecomClientCurrent24StatInvUasPortnread-onlycurrentCurrent 24-hours UAS counter inv. :This OID indicates that the current 24-hours UnAvailable Second counter is invalid
1.3.6.1.4.1.20044.52.12.2.32.1.11Columnpmc2002PerfTelecomClientCurrent24StatUasValuePortnread-onlycurrentCurrent 24-hours UAS counter :This OID gives the current 24-hours UnAvailable Second counter value
1.3.6.1.4.1.20044.52.12.2.40Tablepmc2002PerfTelecomClientPast24StatHistoryPort1Tablenot-accessiblecurrentList of pmc2002PerfTelecomClientPast24StatHistory Article
1.3.6.1.4.1.20044.52.12.2.40.1Rowpmc2002PerfTelecomClientPast24StatHistoryPort1Entrynot-accessiblecurrentRow definition for the pmc2002PerfTelecomClientPast24StatHistory table
1.3.6.1.4.1.20044.52.12.2.40.1.1Columnpmc2002PerfTelecomClientPast24StatHistoryPort1Indexread-onlycurrentIndex definition for the pmc2002PerfTelecomClientPast24StatHistory table
1.3.6.1.4.1.20044.52.12.2.40.1.2Columnpmc2002PerfTelecomClientPast24StatHistoryInvCvPort1read-onlycurrentPrevious 24-hours CV counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid
1.3.6.1.4.1.20044.52.12.2.40.1.3Columnpmc2002PerfTelecomClientPast24StatHistoryCvValuePort1read-onlycurrentPrevious 24-hours CV counter :This OID gives the previous 24-hours Coding Violation counter value
1.3.6.1.4.1.20044.52.12.2.40.1.4Columnpmc2002PerfTelecomClientPast24StatHistoryInvEsPort1read-onlycurrentPrevious 24-hours ES counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid
1.3.6.1.4.1.20044.52.12.2.40.1.5Columnpmc2002PerfTelecomClientPast24StatHistoryEsValuePort1read-onlycurrentPrevious 24-hours ES counter :This OID gives the previous 24-hours Errored Second counter value
1.3.6.1.4.1.20044.52.12.2.40.1.6Columnpmc2002PerfTelecomClientPast24StatHistoryInvSesPort1read-onlycurrentPrevious 24-hours SES counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid
1.3.6.1.4.1.20044.52.12.2.40.1.7Columnpmc2002PerfTelecomClientPast24StatHistorySesValuePort1read-onlycurrentPrevious 24-hours SES counter :This OID gives the previous 24-hours severely Errored Second counter value
1.3.6.1.4.1.20044.52.12.2.40.1.8Columnpmc2002PerfTelecomClientPast24StatHistoryInvSefsPort1read-onlycurrentPrevious 24-hours SEFS counter inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid
1.3.6.1.4.1.20044.52.12.2.40.1.9Columnpmc2002PerfTelecomClientPast24StatHistorySefsValuePort1read-onlycurrentPrevious 24-hours SEFS counter :This OID gives the previous 24-hours severely Errored Framing Second counter value
1.3.6.1.4.1.20044.52.12.2.40.1.10Columnpmc2002PerfTelecomClientPast24StatHistoryInvUasPort1read-onlycurrentPrevious 24-hours UAS counter inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid
1.3.6.1.4.1.20044.52.12.2.40.1.11Columnpmc2002PerfTelecomClientPast24StatHistoryUasValuePort1read-onlycurrentPrevious 24-hours UAS counter :This OID gives the previous 24-hours UnAvailable Second counter value
1.3.6.1.4.1.20044.52.12.2.256Tablepmc2002PerfDatacomClientCurrent15StatTablenot-accessiblecurrentList of pmc2002PerfDatacomClientCurrent15Stat Article
1.3.6.1.4.1.20044.52.12.2.256.1Rowpmc2002PerfDatacomClientCurrent15StatEntrynot-accessiblecurrentRow definition for the pmc2002PerfDatacomClientCurrent15Stat table
1.3.6.1.4.1.20044.52.12.2.256.1.1Columnpmc2002PerfDatacomClientCurrent15StatIndexread-onlycurrentIndex definition for the pmc2002PerfDatacomClientCurrent15Stat table
1.3.6.1.4.1.20044.52.12.2.256.1.2Columnpmc2002perfdatacomclientCurrent15StatInBytesCountInvPortnread-onlycurrentClient Current 15-min Input Bytes counter inv. :This OID indicates that the current 15-min Bytes counter is invalid
1.3.6.1.4.1.20044.52.12.2.256.1.3Columnpmc2002perfdatacomclientCurrent15StatInBytesCountPortnread-onlycurrentClient Current 15-min Input Bytes counter :This OID gives the current 15-min Bytes counter value
1.3.6.1.4.1.20044.52.12.2.256.1.4Columnpmc2002perfdatacomclientCurrent15StatInCrcCountInvPortnread-onlycurrentClient Current 15-min Input CRC counter inv. :This OID indicates that the current 15-min CRC counter is invalid
1.3.6.1.4.1.20044.52.12.2.256.1.5Columnpmc2002perfdatacomclientCurrent15StatInCrcCountPortnread-onlycurrentClient Current 15-min Input CRC counter :This OID gives the current 15-min CRC counter value
1.3.6.1.4.1.20044.52.12.2.256.1.8Columnpmc2002perfdatacomclientCurrent15StatInBroadcastCountInvPortnread-onlycurrentClient Current 15-min Input Broadcast counter inv. :This OID indicates that the current 15-min Broadcast counter is invalid
1.3.6.1.4.1.20044.52.12.2.256.1.9Columnpmc2002perfdatacomclientCurrent15StatInBroadcastCountPortnread-onlycurrentClient Current 15-min Input Broadcast counter :This OID gives the current 15-min Broadcast counter value
1.3.6.1.4.1.20044.52.12.2.256.1.10Columnpmc2002perfdatacomclientCurrent15StatInMulticastCountInvPortnread-onlycurrentClient Current 15-min Input Multicast counter inv. :This OID indicates that the current 15-min Multicast counter is invalid
1.3.6.1.4.1.20044.52.12.2.256.1.11Columnpmc2002perfdatacomclientCurrent15StatInMulticastCountPortnread-onlycurrentClient Current 15-min Input Multicast counter :This OID gives the current 15-min Multicast counter value
1.3.6.1.4.1.20044.52.12.2.256.1.20Columnpmc2002perfdatacomclientCurrent15StatInUnicastCountInvPortnread-onlycurrentClient Current 15-min Input Unicast counter inv. :This OID indicates that the current 15-min Unicast counter is invalid
1.3.6.1.4.1.20044.52.12.2.256.1.21Columnpmc2002perfdatacomclientCurrent15StatInUnicastCountPortnread-onlycurrentClient Current 15-min Input Unicast counter :This OID gives the current 15-min Unicast counter value
1.3.6.1.4.1.20044.52.12.2.256.1.22Columnpmc2002perfdatacomclientCurrent15StatInNonunicastCountInvPortnread-onlycurrentClient Current 15-min Input Non Unicast counter inv. :This OID indicates that the current 15-min Non unicast counter is invalid
1.3.6.1.4.1.20044.52.12.2.256.1.23Columnpmc2002perfdatacomclientCurrent15StatInNonunicastCountPortnread-onlycurrentClient Current 15-min Input Non Unicast counter :This OID gives the current 15-min Non Unicast counter value
1.3.6.1.4.1.20044.52.12.2.256.1.26Columnpmc2002perfdatacomclientCurrent15StatOutBytesCountInvPortnread-onlycurrentClient Current 15-min Output Bytes counter inv. :This OID indicates that the current 15-min Bytes counter is invalid
1.3.6.1.4.1.20044.52.12.2.256.1.27Columnpmc2002perfdatacomclientCurrent15StatOutBytesCountPortnread-onlycurrentClient Current 15-min Output Bytes counter :This OID gives the current 15-min Bytes counter value
1.3.6.1.4.1.20044.52.12.2.256.1.32Columnpmc2002perfdatacomclientCurrent15StatOutBroadcastCountInvPortnread-onlycurrentClient Current 15-min Output Broadcast counter inv. :This OID indicates that the current 15-min Broadcast counter is invalid
1.3.6.1.4.1.20044.52.12.2.256.1.33Columnpmc2002perfdatacomclientCurrent15StatOutBroadcastCountPortnread-onlycurrentClient Current 15-min Output Broadcast counter :This OID gives the current 15-min Broadcast counter value
1.3.6.1.4.1.20044.52.12.2.256.1.34Columnpmc2002perfdatacomclientCurrent15StatOutMulticastCountInvPortnread-onlycurrentClient Current 15-min Output Multicast counter inv. :This OID indicates that the current 15-min Multicast counter is invalid
1.3.6.1.4.1.20044.52.12.2.256.1.35Columnpmc2002perfdatacomclientCurrent15StatOutMulticastCountPortnread-onlycurrentClient Current 15-min Output Multicast counter :This OID gives the current 15-min Multicast counter value
1.3.6.1.4.1.20044.52.12.2.256.1.42Columnpmc2002perfdatacomclientCurrent15StatOutUnicastCountInvPortnread-onlycurrentClient Current 15-min Output Unicast counter inv. :This OID indicates that the current 15-min Unicast counter is invalid
1.3.6.1.4.1.20044.52.12.2.256.1.43Columnpmc2002perfdatacomclientCurrent15StatOutUnicastCountPortnread-onlycurrentClient Current 15-min Output Unicast counter :This OID gives the current 15-min Unicast counter value
1.3.6.1.4.1.20044.52.12.2.256.1.44Columnpmc2002perfdatacomclientCurrent15StatOutNonunicastCountInvPortnread-onlycurrentClient Current 15-min Output Non Unicast counter inv. :This OID indicates that the current 15-min Non Unicast counter is invalid
1.3.6.1.4.1.20044.52.12.2.256.1.45Columnpmc2002perfdatacomclientCurrent15StatOutNonunicastCountPortnread-onlycurrentClient Current 15-min Output Non Unicast counter :This OID gives the current 15-min Non Unicast counter value
1.3.6.1.4.1.20044.52.12.2.264Tablepmc2002PerfDatacomClientPast15StatHistoryPort1Tablenot-accessiblecurrentList of pmc2002PerfDatacomClientPast15StatHistory Article
1.3.6.1.4.1.20044.52.12.2.264.1Rowpmc2002PerfDatacomClientPast15StatHistoryPort1Entrynot-accessiblecurrentRow definition for the pmc2002PerfDatacomClientPast15StatHistory table
1.3.6.1.4.1.20044.52.12.2.264.1.1Columnpmc2002PerfDatacomClientPast15StatHistoryPort1Indexread-onlycurrentIndex definition for the pmc2002PerfDatacomClientPast15StatHistory table
1.3.6.1.4.1.20044.52.12.2.264.1.2Columnpmc2002perfdatacomclientPast15StatInBytesCountInvPort1read-onlycurrentClient Past 15-min Input Bytes counter inv. :This OID indicates that the past 15-min Bytes counter is invalid
1.3.6.1.4.1.20044.52.12.2.264.1.3Columnpmc2002perfdatacomclientPast15StatInBytesCountPort1read-onlycurrentClient Past 15-min Input Bytes counter :This OID gives the past 15-min Bytes counter value
1.3.6.1.4.1.20044.52.12.2.264.1.4Columnpmc2002perfdatacomclientPast15StatInCrcCountInvPort1read-onlycurrentClient Past 15-min Input CRC counter inv. :This OID indicates that the past 15-min CRC counter is invalid
1.3.6.1.4.1.20044.52.12.2.264.1.5Columnpmc2002perfdatacomclientPast15StatInCrcCountPort1read-onlycurrentClient Past 15-min Input CRC counter :This OID gives the past 15-min CRC counter value
1.3.6.1.4.1.20044.52.12.2.264.1.8Columnpmc2002perfdatacomclientPast15StatInBroadcastCountInvPort1read-onlycurrentClient Past 15-min Input Broadcast counter inv. :This OID indicates that the past 15-min Broadcast counter is invalid
1.3.6.1.4.1.20044.52.12.2.264.1.9Columnpmc2002perfdatacomclientPast15StatInBroadcastCountPort1read-onlycurrentClient Past 15-min Input Broadcast counter :This OID gives the past 15-min Broadcast counter value
1.3.6.1.4.1.20044.52.12.2.264.1.10Columnpmc2002perfdatacomclientPast15StatInMulticastCountInvPort1read-onlycurrentClient Past 15-min Input Multicast counter inv. :This OID indicates that the past 15-min Multicast counter is invalid
1.3.6.1.4.1.20044.52.12.2.264.1.11Columnpmc2002perfdatacomclientPast15StatInMulticastCountPort1read-onlycurrentClient Past 15-min Input Multicast counter :This OID gives the past 15-min Multicast counter value
1.3.6.1.4.1.20044.52.12.2.264.1.20Columnpmc2002perfdatacomclientPast15StatInUnicastCountInvPort1read-onlycurrentClient Past 15-min Input Unicast counter inv. :This OID indicates that the past 15-min Unicast counter is invalid
1.3.6.1.4.1.20044.52.12.2.264.1.21Columnpmc2002perfdatacomclientPast15StatInUnicastCountPort1read-onlycurrentClient Past 15-min Input Unicast counter :This OID gives the past 15-min Unicast counter value
1.3.6.1.4.1.20044.52.12.2.264.1.22Columnpmc2002perfdatacomclientPast15StatInNonunicastCountInvPort1read-onlycurrentClient Past 15-min Input Non Unicast counter inv. :This OID indicates that the past 15-min Non unicast counter is invalid
1.3.6.1.4.1.20044.52.12.2.264.1.23Columnpmc2002perfdatacomclientPast15StatInNonunicastCountPort1read-onlycurrentClient Past 15-min Input Non Unicast counter :This OID gives the past 15-min Non Unicast counter value
1.3.6.1.4.1.20044.52.12.2.264.1.26Columnpmc2002perfdatacomclientPast15StatOutBytesCountInvPort1read-onlycurrentClient Past 15-min Output Bytes counter inv. :This OID indicates that the past 15-min Bytes counter is invalid
1.3.6.1.4.1.20044.52.12.2.264.1.27Columnpmc2002perfdatacomclientPast15StatOutBytesCountPort1read-onlycurrentClient Past 15-min Output Bytes counter :This OID gives the past 15-min Bytes counter value
1.3.6.1.4.1.20044.52.12.2.264.1.32Columnpmc2002perfdatacomclientPast15StatOutBroadcastCountInvPort1read-onlycurrentClient Past 15-min Output Broadcast counter inv. :This OID indicates that the past 15-min Broadcast counter is invalid
1.3.6.1.4.1.20044.52.12.2.264.1.33Columnpmc2002perfdatacomclientPast15StatOutBroadcastCountPort1read-onlycurrentClient Past 15-min Output Broadcast counter :This OID gives the past 15-min Broadcast counter value
1.3.6.1.4.1.20044.52.12.2.264.1.34Columnpmc2002perfdatacomclientPast15StatOutMulticastCountInvPort1read-onlycurrentClient Past 15-min Output Multicast counter inv. :This OID indicates that the past 15-min Multicast counter is invalid
1.3.6.1.4.1.20044.52.12.2.264.1.35Columnpmc2002perfdatacomclientPast15StatOutMulticastCountPort1read-onlycurrentClient Past 15-min Output Multicast counter :This OID gives the past 15-min Multicast counter value
1.3.6.1.4.1.20044.52.12.2.264.1.42Columnpmc2002perfdatacomclientPast15StatOutUnicastCountInvPort1read-onlycurrentClient Past 15-min Output Unicast counter inv. :This OID indicates that the past 15-min Unicast counter is invalid
1.3.6.1.4.1.20044.52.12.2.264.1.43Columnpmc2002perfdatacomclientPast15StatOutUnicastCountPort1read-onlycurrentClient Past 15-min Output Unicast counter :This OID gives the past 15-min Unicast counter value
1.3.6.1.4.1.20044.52.12.2.264.1.44Columnpmc2002perfdatacomclientPast15StatOutNonunicastCountInvPort1read-onlycurrentClient Past 15-min Output Non Unicast counter inv. :This OID indicates that the past 15-min Non Unicast counter is invalid
1.3.6.1.4.1.20044.52.12.2.264.1.45Columnpmc2002perfdatacomclientPast15StatOutNonunicastCountPort1read-onlycurrentClient Past 15-min Output Non Unicast counter :This OID gives the past 15-min Non Unicast counter value
1.3.6.1.4.1.20044.52.12.2.272Tablepmc2002PerfDatacomClientCurrent24StatTablenot-accessiblecurrentList of pmc2002PerfDatacomClientCurrent24Stat Article
1.3.6.1.4.1.20044.52.12.2.272.1Rowpmc2002PerfDatacomClientCurrent24StatEntrynot-accessiblecurrentRow definition for the pmc2002PerfDatacomClientCurrent24Stat table
1.3.6.1.4.1.20044.52.12.2.272.1.1Columnpmc2002PerfDatacomClientCurrent24StatIndexread-onlycurrentIndex definition for the pmc2002PerfDatacomClientCurrent24Stat table
1.3.6.1.4.1.20044.52.12.2.272.1.2Columnpmc2002perfdatacomclientCurrent24StatInBytesCountInvPortnread-onlycurrentClient Current 24-hours Input Bytes counter inv. :This OID indicates that the current 24-hours Bytes counter is invalid
1.3.6.1.4.1.20044.52.12.2.272.1.3Columnpmc2002perfdatacomclientCurrent24StatInBytesCountPortnread-onlycurrentClient Current 24-hours Input Bytes counter :This OID gives the current 24-hours Bytes counter value
1.3.6.1.4.1.20044.52.12.2.272.1.4Columnpmc2002perfdatacomclientCurrent24StatInCrcCountInvPortnread-onlycurrentClient Current 24-hours Input CRC counter inv. :This OID indicates that the current 24-hours CRC counter is invalid
1.3.6.1.4.1.20044.52.12.2.272.1.5Columnpmc2002perfdatacomclientCurrent24StatInCrcCountPortnread-onlycurrentClient Current 24-hours Input CRC counter :This OID gives the current 24-hours CRC counter value
1.3.6.1.4.1.20044.52.12.2.272.1.8Columnpmc2002perfdatacomclientCurrent24StatInBroadcastCountInvPortnread-onlycurrentClient Current 24-hours Input Broadcast counter inv. :This OID indicates that the current 24-hours Broadcast counter is invalid
1.3.6.1.4.1.20044.52.12.2.272.1.9Columnpmc2002perfdatacomclientCurrent24StatInBroadcastCountPortnread-onlycurrentClient Current 24-hours Input Broadcast counter :This OID gives the current 24-hours Broadcast counter value
1.3.6.1.4.1.20044.52.12.2.272.1.10Columnpmc2002perfdatacomclientCurrent24StatInMulticastCountInvPortnread-onlycurrentClient Current 24-hours Input Multicast counter inv. :This OID indicates that the current 24-hours Multicast counter is invalid
1.3.6.1.4.1.20044.52.12.2.272.1.11Columnpmc2002perfdatacomclientCurrent24StatInMulticastCountPortnread-onlycurrentClient Current 24-hours Input Multicast counter :This OID gives the current 24-hours Multicast counter value
1.3.6.1.4.1.20044.52.12.2.272.1.20Columnpmc2002perfdatacomclientCurrent24StatInUnicastCountInvPortnread-onlycurrentClient Current 24-hours Input Unicast counter inv. :This OID indicates that the current 24-hours Unicast counter is invalid
1.3.6.1.4.1.20044.52.12.2.272.1.21Columnpmc2002perfdatacomclientCurrent24StatInUnicastCountPortnread-onlycurrentClient Current 24-hours Input Unicast counter :This OID gives the current 24-hours Unicast counter value
1.3.6.1.4.1.20044.52.12.2.272.1.22Columnpmc2002perfdatacomclientCurrent24StatInNonunicastCountInvPortnread-onlycurrentClient Current 24-hours Input Non Unicast counter inv. :This OID indicates that the current 24-hours Non unicast counter is invalid
1.3.6.1.4.1.20044.52.12.2.272.1.23Columnpmc2002perfdatacomclientCurrent24StatInNonunicastCountPortnread-onlycurrentClient Current 24-hours Input Non Unicast counter :This OID gives the current 24-hours Non Unicast counter value
1.3.6.1.4.1.20044.52.12.2.272.1.26Columnpmc2002perfdatacomclientCurrent24StatOutBytesCountInvPortnread-onlycurrentClient Current 24-hours Output Bytes counter inv. :This OID indicates that the current 24-hours Bytes counter is invalid
1.3.6.1.4.1.20044.52.12.2.272.1.27Columnpmc2002perfdatacomclientCurrent24StatOutBytesCountPortnread-onlycurrentClient Current 24-hours Output Bytes counter :This OID gives the current 24-hours Bytes counter value
1.3.6.1.4.1.20044.52.12.2.272.1.32Columnpmc2002perfdatacomclientCurrent24StatOutBroadcastCountInvPortnread-onlycurrentClient Current 24-hours Output Broadcast counter inv. :This OID indicates that the current 24-hours Broadcast counter is invalid
1.3.6.1.4.1.20044.52.12.2.272.1.33Columnpmc2002perfdatacomclientCurrent24StatOutBroadcastCountPortnread-onlycurrentClient Current 24-hours Output Broadcast counter :This OID gives the current 24-hours Broadcast counter value
1.3.6.1.4.1.20044.52.12.2.272.1.34Columnpmc2002perfdatacomclientCurrent24StatOutMulticastCountInvPortnread-onlycurrentClient Current 24-hours Output Multicast counter inv. :This OID indicates that the current 24-hours Multicast counter is invalid
1.3.6.1.4.1.20044.52.12.2.272.1.35Columnpmc2002perfdatacomclientCurrent24StatOutMulticastCountPortnread-onlycurrentClient Current 24-hours Output Multicast counter :This OID gives the current 24-hours Multicast counter value
1.3.6.1.4.1.20044.52.12.2.272.1.42Columnpmc2002perfdatacomclientCurrent24StatOutUnicastCountInvPortnread-onlycurrentClient Current 24-hours Output Unicast counter inv. :This OID indicates that the current 24-hours Unicast counter is invalid
1.3.6.1.4.1.20044.52.12.2.272.1.43Columnpmc2002perfdatacomclientCurrent24StatOutUnicastCountPortnread-onlycurrentClient Current 24-hours Output Unicast counter :This OID gives the current 24-hours Unicast counter value
1.3.6.1.4.1.20044.52.12.2.272.1.44Columnpmc2002perfdatacomclientCurrent24StatOutNonunicastCountInvPortnread-onlycurrentClient Current 24-hours Output Non Unicast counter inv. :This OID indicates that the current 24-hours Non Unicast counter is invalid
1.3.6.1.4.1.20044.52.12.2.272.1.45Columnpmc2002perfdatacomclientCurrent24StatOutNonunicastCountPortnread-onlycurrentClient Current 24-hours Output Non Unicast counter :This OID gives the current 24-hours Non Unicast counter value
1.3.6.1.4.1.20044.52.12.2.280Tablepmc2002PerfDatacomClientPast24StatHistoryPort1Tablenot-accessiblecurrentList of pmc2002PerfDatacomClientPast24StatHistory Article
1.3.6.1.4.1.20044.52.12.2.280.1Rowpmc2002PerfDatacomClientPast24StatHistoryPort1Entrynot-accessiblecurrentRow definition for the pmc2002PerfDatacomClientPast24StatHistory table
1.3.6.1.4.1.20044.52.12.2.280.1.1Columnpmc2002PerfDatacomClientPast24StatHistoryPort1Indexread-onlycurrentIndex definition for the pmc2002PerfDatacomClientPast24StatHistory table
1.3.6.1.4.1.20044.52.12.2.280.1.2Columnpmc2002perfdatacomclientPast24StatInBytesCountInvPort1read-onlycurrentClient Past 24-hours Input Bytes counter inv. :This OID indicates that the past 24-hours Bytes counter is invalid
1.3.6.1.4.1.20044.52.12.2.280.1.3Columnpmc2002perfdatacomclientPast24StatInBytesCountPort1read-onlycurrentClient Past 24-hours Input Bytes counter :This OID gives the past 24-hours Bytes counter value
1.3.6.1.4.1.20044.52.12.2.280.1.4Columnpmc2002perfdatacomclientPast24StatInCrcCountInvPort1read-onlycurrentClient Past 24-hours Input CRC counter inv. :This OID indicates that the past 24-hours CRC counter is invalid
1.3.6.1.4.1.20044.52.12.2.280.1.5Columnpmc2002perfdatacomclientPast24StatInCrcCountPort1read-onlycurrentClient Past 24-hours Input CRC counter :This OID gives the past 24-hours CRC counter value
1.3.6.1.4.1.20044.52.12.2.280.1.8Columnpmc2002perfdatacomclientPast24StatInBroadcastCountInvPort1read-onlycurrentClient Past 24-hours Input Broadcast counter inv. :This OID indicates that the past 24-hours Broadcast counter is invalid
1.3.6.1.4.1.20044.52.12.2.280.1.9Columnpmc2002perfdatacomclientPast24StatInBroadcastCountPort1read-onlycurrentClient Past 24-hours Input Broadcast counter :This OID gives the past 24-hours Broadcast counter value
1.3.6.1.4.1.20044.52.12.2.280.1.10Columnpmc2002perfdatacomclientPast24StatInMulticastCountInvPort1read-onlycurrentClient Past 24-hours Input Multicast counter inv. :This OID indicates that the past 24-hours Multicast counter is invalid
1.3.6.1.4.1.20044.52.12.2.280.1.11Columnpmc2002perfdatacomclientPast24StatInMulticastCountPort1read-onlycurrentClient Past 24-hours Input Multicast counter :This OID gives the past 24-hours Multicast counter value
1.3.6.1.4.1.20044.52.12.2.280.1.20Columnpmc2002perfdatacomclientPast24StatInUnicastCountInvPort1read-onlycurrentClient Past 24-hours Input Unicast counter inv. :This OID indicates that the past 24-hours Unicast counter is invalid
1.3.6.1.4.1.20044.52.12.2.280.1.21Columnpmc2002perfdatacomclientPast24StatInUnicastCountPort1read-onlycurrentClient Past 24-hours Input Unicast counter :This OID gives the past 24-hours Unicast counter value
1.3.6.1.4.1.20044.52.12.2.280.1.22Columnpmc2002perfdatacomclientPast24StatInNonunicastCountInvPort1read-onlycurrentClient Past 24-hours Input Non Unicast counter inv. :This OID indicates that the past 24-hours Non unicast counter is invalid
1.3.6.1.4.1.20044.52.12.2.280.1.23Columnpmc2002perfdatacomclientPast24StatInNonunicastCountPort1read-onlycurrentClient Past 24-hours Input Non Unicast counter :This OID gives the past 24-hours Non Unicast counter value
1.3.6.1.4.1.20044.52.12.2.280.1.26Columnpmc2002perfdatacomclientPast24StatOutBytesCountInvPort1read-onlycurrentClient Past 24-hours Output Bytes counter inv. :This OID indicates that the past 24-hours Bytes counter is invalid
1.3.6.1.4.1.20044.52.12.2.280.1.27Columnpmc2002perfdatacomclientPast24StatOutBytesCountPort1read-onlycurrentClient Past 24-hours Output Bytes counter :This OID gives the past 24-hours Bytes counter value
1.3.6.1.4.1.20044.52.12.2.280.1.32Columnpmc2002perfdatacomclientPast24StatOutBroadcastCountInvPort1read-onlycurrentClient Past 24-hours Output Broadcast counter inv. :This OID indicates that the past 24-hours Broadcast counter is invalid
1.3.6.1.4.1.20044.52.12.2.280.1.33Columnpmc2002perfdatacomclientPast24StatOutBroadcastCountPort1read-onlycurrentClient Past 24-hours Output Broadcast counter :This OID gives the past 24-hours Broadcast counter value
1.3.6.1.4.1.20044.52.12.2.280.1.34Columnpmc2002perfdatacomclientPast24StatOutMulticastCountInvPort1read-onlycurrentClient Past 24-hours Output Multicast counter inv. :This OID indicates that the past 24-hours Multicast counter is invalid
1.3.6.1.4.1.20044.52.12.2.280.1.35Columnpmc2002perfdatacomclientPast24StatOutMulticastCountPort1read-onlycurrentClient Past 24-hours Output Multicast counter :This OID gives the past 24-hours Multicast counter value
1.3.6.1.4.1.20044.52.12.2.280.1.42Columnpmc2002perfdatacomclientPast24StatOutUnicastCountInvPort1read-onlycurrentClient Past 24-hours Output Unicast counter inv. :This OID indicates that the past 24-hours Unicast counter is invalid
1.3.6.1.4.1.20044.52.12.2.280.1.43Columnpmc2002perfdatacomclientPast24StatOutUnicastCountPort1read-onlycurrentClient Past 24-hours Output Unicast counter :This OID gives the past 24-hours Unicast counter value
1.3.6.1.4.1.20044.52.12.2.280.1.44Columnpmc2002perfdatacomclientPast24StatOutNonunicastCountInvPort1read-onlycurrentClient Past 24-hours Output Non Unicast counter inv. :This OID indicates that the past 24-hours Non Unicast counter is invalid
1.3.6.1.4.1.20044.52.12.2.280.1.45Columnpmc2002perfdatacomclientPast24StatOutNonunicastCountPort1read-onlycurrentClient Past 24-hours Output Non Unicast counter :This OID gives the past 24-hours Non Unicast counter value
1.3.6.1.4.1.20044.52.12.3Nodepmc2002MonLine
1.3.6.1.4.1.20044.52.12.3.128Tablepmc2002PerfTelecomLineCurrent15StatTablenot-accessiblecurrentList of pmc2002PerfTelecomLineCurrent15Stat Article
1.3.6.1.4.1.20044.52.12.3.128.1Rowpmc2002PerfTelecomLineCurrent15StatEntrynot-accessiblecurrentRow definition for the pmc2002PerfTelecomLineCurrent15Stat table
1.3.6.1.4.1.20044.52.12.3.128.1.1Columnpmc2002PerfTelecomLineCurrent15StatIndexread-onlycurrentIndex definition for the pmc2002PerfTelecomLineCurrent15Stat table
1.3.6.1.4.1.20044.52.12.3.128.1.2Columnpmc2002PerfTelecomLineCurrent15StatInvCvPortnread-onlycurrentCurrent 15-min CV counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid
1.3.6.1.4.1.20044.52.12.3.128.1.3Columnpmc2002PerfTelecomLineCurrent15StatCvValuePortnread-onlycurrentCurrent 15-min CV counter :This OID gives the current 15-min Coding Violation counter value
1.3.6.1.4.1.20044.52.12.3.128.1.4Columnpmc2002PerfTelecomLineCurrent15StatInvEsPortnread-onlycurrentCurrent 15-min ES counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid
1.3.6.1.4.1.20044.52.12.3.128.1.5Columnpmc2002PerfTelecomLineCurrent15StatEsValuePortnread-onlycurrentCurrent 15-min ES counter :This OID gives the current 15-min Errored Second counter value
1.3.6.1.4.1.20044.52.12.3.128.1.6Columnpmc2002PerfTelecomLineCurrent15StatInvSesPortnread-onlycurrentCurrent 15-min SES counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid
1.3.6.1.4.1.20044.52.12.3.128.1.7Columnpmc2002PerfTelecomLineCurrent15StatSesValuePortnread-onlycurrentCurrent 15-min SES counter :This OID gives the current 15-min severely Errored Second counter value
1.3.6.1.4.1.20044.52.12.3.128.1.8Columnpmc2002PerfTelecomLineCurrent15StatInvSefsPortnread-onlycurrentCurrent 15-min SEFS counter inv. :This OID indicates that the current 15-min severely Errored Framing Second counter is invalid
1.3.6.1.4.1.20044.52.12.3.128.1.9Columnpmc2002PerfTelecomLineCurrent15StatSefsValuePortnread-onlycurrentCurrent 15-min SEFS counter :This OID gives the current 15-min severely Errored Framing Second counter value
1.3.6.1.4.1.20044.52.12.3.128.1.10Columnpmc2002PerfTelecomLineCurrent15StatInvUasPortnread-onlycurrentCurrent 15-min UAS counter inv. :This OID indicates that the current 15-min UnAvailable Second counter is invalid
1.3.6.1.4.1.20044.52.12.3.128.1.11Columnpmc2002PerfTelecomLineCurrent15StatUasValuePortnread-onlycurrentCurrent 15-min UAS counter :This OID gives the current 15-min UnAvailable Second counter value
1.3.6.1.4.1.20044.52.12.3.129Tablepmc2002PerfTelecomLinePast15StatHistoryPort1Tablenot-accessiblecurrentList of pmc2002PerfTelecomLinePast15StatHistory Article
1.3.6.1.4.1.20044.52.12.3.129.1Rowpmc2002PerfTelecomLinePast15StatHistoryPort1Entrynot-accessiblecurrentRow definition for the pmc2002PerfTelecomLinePast15StatHistory table
1.3.6.1.4.1.20044.52.12.3.129.1.1Columnpmc2002PerfTelecomLinePast15StatHistoryPort1Indexread-onlycurrentIndex definition for the pmc2002PerfTelecomLinePast15StatHistory table
1.3.6.1.4.1.20044.52.12.3.129.1.2Columnpmc2002PerfTelecomLinePast15StatHistoryInvCvPort1read-onlycurrentPrevious 15-min CV counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid
1.3.6.1.4.1.20044.52.12.3.129.1.3Columnpmc2002PerfTelecomLinePast15StatHistoryCvValuePort1read-onlycurrentPrevious 15-min CV counter :This OID gives the previous 15-min Coding Violation counter value
1.3.6.1.4.1.20044.52.12.3.129.1.4Columnpmc2002PerfTelecomLinePast15StatHistoryInvEsPort1read-onlycurrentPrevious 15-min ES counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid
1.3.6.1.4.1.20044.52.12.3.129.1.5Columnpmc2002PerfTelecomLinePast15StatHistoryEsValuePort1read-onlycurrentPrevious 15-min ES counter :This OID gives the previous 15-min Errored Second counter value
1.3.6.1.4.1.20044.52.12.3.129.1.6Columnpmc2002PerfTelecomLinePast15StatHistoryInvSesPort1read-onlycurrentPrevious 15-min SES counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid
1.3.6.1.4.1.20044.52.12.3.129.1.7Columnpmc2002PerfTelecomLinePast15StatHistorySesValuePort1read-onlycurrentPrevious 15-min SES counter :This OID gives the previous 15-min severely Errored Second counter value
1.3.6.1.4.1.20044.52.12.3.129.1.8Columnpmc2002PerfTelecomLinePast15StatHistoryInvSefsPort1read-onlycurrentPrevious 15-min SEFS counter inv. :This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid
1.3.6.1.4.1.20044.52.12.3.129.1.9Columnpmc2002PerfTelecomLinePast15StatHistorySefsValuePort1read-onlycurrentPrevious 15-min SEFS counter :This OID gives the previous 15-min severely Errored Framing Second counter value
1.3.6.1.4.1.20044.52.12.3.129.1.10Columnpmc2002PerfTelecomLinePast15StatHistoryInvUasPort1read-onlycurrentPrevious 15-min UAS counter inv. :This OID indicates that the previous 15-min UnAvailable Second counter is invalid
1.3.6.1.4.1.20044.52.12.3.129.1.11Columnpmc2002PerfTelecomLinePast15StatHistoryUasValuePort1read-onlycurrentPrevious 15-min UAS counter :This OID gives the previous 15-min UnAvailable Second counter value
1.3.6.1.4.1.20044.52.12.3.130Tablepmc2002PerfTelecomLineCurrent24StatTablenot-accessiblecurrentList of pmc2002PerfTelecomLineCurrent24Stat Article
1.3.6.1.4.1.20044.52.12.3.130.1Rowpmc2002PerfTelecomLineCurrent24StatEntrynot-accessiblecurrentRow definition for the pmc2002PerfTelecomLineCurrent24Stat table
1.3.6.1.4.1.20044.52.12.3.130.1.1Columnpmc2002PerfTelecomLineCurrent24StatIndexread-onlycurrentIndex definition for the pmc2002PerfTelecomLineCurrent24Stat table
1.3.6.1.4.1.20044.52.12.3.130.1.2Columnpmc2002PerfTelecomLineCurrent24StatInvCvPortnread-onlycurrentCurrent 24-hours CV counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid
1.3.6.1.4.1.20044.52.12.3.130.1.3Columnpmc2002PerfTelecomLineCurrent24StatCvValuePortnread-onlycurrentCurrent 24-hours CV counter :This OID gives the current 24-hours Coding Violation counter value
1.3.6.1.4.1.20044.52.12.3.130.1.4Columnpmc2002PerfTelecomLineCurrent24StatInvEsPortnread-onlycurrentCurrent 24-hours ES counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid
1.3.6.1.4.1.20044.52.12.3.130.1.5Columnpmc2002PerfTelecomLineCurrent24StatEsValuePortnread-onlycurrentCurrent 24-hours ES counter :This OID gives the current 24-hours Errored Second counter value
1.3.6.1.4.1.20044.52.12.3.130.1.6Columnpmc2002PerfTelecomLineCurrent24StatInvSesPortnread-onlycurrentCurrent 24-hours SES counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid
1.3.6.1.4.1.20044.52.12.3.130.1.7Columnpmc2002PerfTelecomLineCurrent24StatSesValuePortnread-onlycurrentCurrent 24-hours SES counter :This OID gives the current 24-hours severely Errored Second counter value
1.3.6.1.4.1.20044.52.12.3.130.1.8Columnpmc2002PerfTelecomLineCurrent24StatInvSefsPortnread-onlycurrentCurrent 24-hours SEFS counter inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid
1.3.6.1.4.1.20044.52.12.3.130.1.9Columnpmc2002PerfTelecomLineCurrent24StatSefsValuePortnread-onlycurrentCurrent 24-hours SEFS counter :This OID gives the current 24-hours severely Errored Framing Second counter value
1.3.6.1.4.1.20044.52.12.3.130.1.10Columnpmc2002PerfTelecomLineCurrent24StatInvUasPortnread-onlycurrentCurrent 24-hours UAS counter inv. :This OID indicates that the current 24-hours UnAvailable Second counter is invalid
1.3.6.1.4.1.20044.52.12.3.130.1.11Columnpmc2002PerfTelecomLineCurrent24StatUasValuePortnread-onlycurrentCurrent 24-hours UAS counter :This OID gives the current 24-hours UnAvailable Second counter value
1.3.6.1.4.1.20044.52.12.3.131Tablepmc2002PerfTelecomLinePast24StatHistoryPort1Tablenot-accessiblecurrentList of pmc2002PerfTelecomLinePast24StatHistory Article
1.3.6.1.4.1.20044.52.12.3.131.1Rowpmc2002PerfTelecomLinePast24StatHistoryPort1Entrynot-accessiblecurrentRow definition for the pmc2002PerfTelecomLinePast24StatHistory table
1.3.6.1.4.1.20044.52.12.3.131.1.1Columnpmc2002PerfTelecomLinePast24StatHistoryPort1Indexread-onlycurrentIndex definition for the pmc2002PerfTelecomLinePast24StatHistory table
1.3.6.1.4.1.20044.52.12.3.131.1.2Columnpmc2002PerfTelecomLinePast24StatHistoryInvCvPort1read-onlycurrentPrevious 24-hours CV counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid
1.3.6.1.4.1.20044.52.12.3.131.1.3Columnpmc2002PerfTelecomLinePast24StatHistoryCvValuePort1read-onlycurrentPrevious 24-hours CV counter :This OID gives the previous 24-hours Coding Violation counter value
1.3.6.1.4.1.20044.52.12.3.131.1.4Columnpmc2002PerfTelecomLinePast24StatHistoryInvEsPort1read-onlycurrentPrevious 24-hours ES counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid
1.3.6.1.4.1.20044.52.12.3.131.1.5Columnpmc2002PerfTelecomLinePast24StatHistoryEsValuePort1read-onlycurrentPrevious 24-hours ES counter :This OID gives the previous 24-hours Errored Second counter value
1.3.6.1.4.1.20044.52.12.3.131.1.6Columnpmc2002PerfTelecomLinePast24StatHistoryInvSesPort1read-onlycurrentPrevious 24-hours SES counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid
1.3.6.1.4.1.20044.52.12.3.131.1.7Columnpmc2002PerfTelecomLinePast24StatHistorySesValuePort1read-onlycurrentPrevious 24-hours SES counter :This OID gives the previous 24-hours severely Errored Second counter value
1.3.6.1.4.1.20044.52.12.3.131.1.8Columnpmc2002PerfTelecomLinePast24StatHistoryInvSefsPort1read-onlycurrentPrevious 24-hours SEFS counter inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid
1.3.6.1.4.1.20044.52.12.3.131.1.9Columnpmc2002PerfTelecomLinePast24StatHistorySefsValuePort1read-onlycurrentPrevious 24-hours SEFS counter :This OID gives the previous 24-hours severely Errored Framing Second counter value
1.3.6.1.4.1.20044.52.12.3.131.1.10Columnpmc2002PerfTelecomLinePast24StatHistoryInvUasPort1read-onlycurrentPrevious 24-hours UAS counter inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid
1.3.6.1.4.1.20044.52.12.3.131.1.11Columnpmc2002PerfTelecomLinePast24StatHistoryUasValuePort1read-onlycurrentPrevious 24-hours UAS counter :This OID gives the previous 24-hours UnAvailable Second counter value
1.3.6.1.4.1.20044.52.12.4Nodepmc2002Rmon
1.3.6.1.4.1.20044.52.12.4.1Nodepmc2002RmonClient
1.3.6.1.4.1.20044.52.12.4.1.16Tablepmc2002MonupRmonByteCntTablenot-accessiblecurrentList of pmc2002MonupRmonByteCnt Article
1.3.6.1.4.1.20044.52.12.4.1.16.1Rowpmc2002MonupRmonByteCntEntrynot-accessiblecurrentRow definition for the pmc2002MonupRmonByteCnt table
1.3.6.1.4.1.20044.52.12.4.1.16.1.1Columnpmc2002MonupRmonByteCntIndexread-onlycurrentIndex definition for the pmc2002MonupRmonByteCnt table
1.3.6.1.4.1.20044.52.12.4.1.16.1.2Columnpmc2002MonupRmonByteCntValuePortnread-onlycurrentClient Input Bytes :This counter is increased each time a data byte is received on the client port <Help> This counter gives the number of bytes received on th…
1.3.6.1.4.1.20044.52.12.4.1.16.1.3Columnpmc2002MonupRmonByteCntErrorPortnread-onlycurrentInput Bytes Counter Error :This OID when set indicates the input Bytes counter value is invalid on client port
1.3.6.1.4.1.20044.52.12.4.1.16.1.4Columnpmc2002MonupRmonByteCntOverloadPortnread-onlycurrentInput Bytes Counter Overload :This OID when set indicates an input Bytes counter overload on client port
1.3.6.1.4.1.20044.52.12.4.1.24Tablepmc2002MonupRmonCrcErrorCntTablenot-accessiblecurrentList of pmc2002MonupRmonCrcErrorCnt Article
1.3.6.1.4.1.20044.52.12.4.1.24.1Rowpmc2002MonupRmonCrcErrorCntEntrynot-accessiblecurrentRow definition for the pmc2002MonupRmonCrcErrorCnt table
1.3.6.1.4.1.20044.52.12.4.1.24.1.1Columnpmc2002MonupRmonCrcErrorCntIndexread-onlycurrentIndex definition for the pmc2002MonupRmonCrcErrorCnt table
1.3.6.1.4.1.20044.52.12.4.1.24.1.2Columnpmc2002MonupRmonCrcErrorCntValuePortnread-onlycurrentClient Input CRC Errors :This counter is increased each time a CRC error is detected on the client port. <Help> This counter gives the number of CRC Errors rec…
1.3.6.1.4.1.20044.52.12.4.1.24.1.3Columnpmc2002MonupRmonCrcErrorCntErrorPortnread-onlycurrentInput CRC Errors Counter Error :This OID when set indicates the input CRC Errors counter value is invalid on client port
1.3.6.1.4.1.20044.52.12.4.1.24.1.4Columnpmc2002MonupRmonCrcErrorCntOverloadPortnread-onlycurrentInput CRC Errors Counter Overload :This OID when set indicates an input CRC Errors counter overload on client port
1.3.6.1.4.1.20044.52.12.4.1.32Tablepmc2002MonupRmonPacketsCntTablenot-accessiblecurrentList of pmc2002MonupRmonPacketsCnt Article
1.3.6.1.4.1.20044.52.12.4.1.32.1Rowpmc2002MonupRmonPacketsCntEntrynot-accessiblecurrentRow definition for the pmc2002MonupRmonPacketsCnt table
1.3.6.1.4.1.20044.52.12.4.1.32.1.1Columnpmc2002MonupRmonPacketsCntIndexread-onlycurrentIndex definition for the pmc2002MonupRmonPacketsCnt table
1.3.6.1.4.1.20044.52.12.4.1.32.1.2Columnpmc2002MonupRmonPacketsCntValuePortnread-onlycurrentPackets Counter On Client Input :This counter is increased each time a packet is received on the client port <Help> This counter gives the number of packets re…
1.3.6.1.4.1.20044.52.12.4.1.32.1.3Columnpmc2002MonupRmonPacketsCntErrorPortnread-onlycurrentInput Packets Counter Error :This OID when set indicates the input Packets counter value is invalid on client port
1.3.6.1.4.1.20044.52.12.4.1.32.1.4Columnpmc2002MonupRmonPacketsCntOverloadPortnread-onlycurrentInput Packets Counter Overload :This OID when set indicates an input Packets counter overload on client port
1.3.6.1.4.1.20044.52.12.4.1.40Tablepmc2002MonupRmonBroadcastCntTablenot-accessiblecurrentList of pmc2002MonupRmonBroadcastCnt Article
1.3.6.1.4.1.20044.52.12.4.1.40.1Rowpmc2002MonupRmonBroadcastCntEntrynot-accessiblecurrentRow definition for the pmc2002MonupRmonBroadcastCnt table
1.3.6.1.4.1.20044.52.12.4.1.40.1.1Columnpmc2002MonupRmonBroadcastCntIndexread-onlycurrentIndex definition for the pmc2002MonupRmonBroadcastCnt table
1.3.6.1.4.1.20044.52.12.4.1.40.1.2Columnpmc2002MonupRmonBroadcastCntValuePortnread-onlycurrentClient Input Broadcast Packets :This counter is increased each time a broadcast packet is received on the client port. <Help> This counter gives the number of …
1.3.6.1.4.1.20044.52.12.4.1.40.1.3Columnpmc2002MonupRmonBroadcastCntErrorPortnread-onlycurrentInput Broadcast Counter Error :This OID when set indicates the input Broadcast counter value is invalid on client port
1.3.6.1.4.1.20044.52.12.4.1.40.1.4Columnpmc2002MonupRmonBroadcastCntOverloadPortnread-onlycurrentInput Broadcast Counter Overload :This OID when set indicates an input Broadcast counter overload on client port
1.3.6.1.4.1.20044.52.12.4.1.48Tablepmc2002MonupRmonMulticastCntTablenot-accessiblecurrentList of pmc2002MonupRmonMulticastCnt Article
1.3.6.1.4.1.20044.52.12.4.1.48.1Rowpmc2002MonupRmonMulticastCntEntrynot-accessiblecurrentRow definition for the pmc2002MonupRmonMulticastCnt table
1.3.6.1.4.1.20044.52.12.4.1.48.1.1Columnpmc2002MonupRmonMulticastCntIndexread-onlycurrentIndex definition for the pmc2002MonupRmonMulticastCnt table
1.3.6.1.4.1.20044.52.12.4.1.48.1.2Columnpmc2002MonupRmonMulticastCntValuePortnread-onlycurrentClient Input Multicast Packets :This counter is increased each time a Multicast packet is received on the client port. <Help> This counter gives the number of …
1.3.6.1.4.1.20044.52.12.4.1.48.1.3Columnpmc2002MonupRmonMulticastCntErrorPortnread-onlycurrentInput Multicast Counter Error :This OID when set indicates the input Multicast counter value is invalid on client port
1.3.6.1.4.1.20044.52.12.4.1.48.1.4Columnpmc2002MonupRmonMulticastCntOverloadPortnread-onlycurrentInput Multicast Counter Overload :This OID when set indicates an input Multicast counter overload on client port
1.3.6.1.4.1.20044.52.12.4.1.56Tablepmc2002MonupRmonTimerCntTablenot-accessiblecurrentList of pmc2002MonupRmonTimerCnt Article
1.3.6.1.4.1.20044.52.12.4.1.56.1Rowpmc2002MonupRmonTimerCntEntrynot-accessiblecurrentRow definition for the pmc2002MonupRmonTimerCnt table
1.3.6.1.4.1.20044.52.12.4.1.56.1.1Columnpmc2002MonupRmonTimerCntIndexread-onlycurrentIndex definition for the pmc2002MonupRmonTimerCnt table
1.3.6.1.4.1.20044.52.12.4.1.56.1.2Columnpmc2002MonupRmonTimerCntValuePortnread-onlycurrentRMON Timer On Client Input :This is the timing counter dedicated to the upstream RMON counters. It is incremented every 125 us.
1.3.6.1.4.1.20044.52.12.4.1.56.1.3Columnpmc2002MonupRmonTimerCntErrorPortnread-onlycurrentInput RMON Timer Error :This OID when set indicates the input RMON timer is invalid on client port
1.3.6.1.4.1.20044.52.12.4.1.56.1.4Columnpmc2002MonupRmonTimerCntOverloadPortnread-onlycurrentInput RMON Timer Overload :This OID when set indicates an input RMON timer overload on client port
1.3.6.1.4.1.20044.52.12.4.1.64Tablepmc2002MonupRmonPauseFrameCntTablenot-accessiblecurrentList of pmc2002MonupRmonPauseFrameCnt Article
1.3.6.1.4.1.20044.52.12.4.1.64.1Rowpmc2002MonupRmonPauseFrameCntEntrynot-accessiblecurrentRow definition for the pmc2002MonupRmonPauseFrameCnt table
1.3.6.1.4.1.20044.52.12.4.1.64.1.1Columnpmc2002MonupRmonPauseFrameCntIndexread-onlycurrentIndex definition for the pmc2002MonupRmonPauseFrameCnt table
1.3.6.1.4.1.20044.52.12.4.1.64.1.2Columnpmc2002MonupRmonPauseFrameCntValuePortnread-onlycurrentPause Counter On Client Input :This counter is increased each time a Pause frame is received on the client port
1.3.6.1.4.1.20044.52.12.4.1.64.1.3Columnpmc2002MonupRmonPauseFrameCntErrorPortnread-onlycurrentInput Pause Counter Error :This OID when set indicates the input Pause counter value is invalid on client port
1.3.6.1.4.1.20044.52.12.4.1.64.1.4Columnpmc2002MonupRmonPauseFrameCntOverloadPortnread-onlycurrentInput Pause Counter Overload :This OID when set indicates an input Pause counter overload on client port
1.3.6.1.4.1.20044.52.12.4.1.72Tablepmc2002MonupRmonDropFrameCntTablenot-accessiblecurrentList of pmc2002MonupRmonDropFrameCnt Article
1.3.6.1.4.1.20044.52.12.4.1.72.1Rowpmc2002MonupRmonDropFrameCntEntrynot-accessiblecurrentRow definition for the pmc2002MonupRmonDropFrameCnt table
1.3.6.1.4.1.20044.52.12.4.1.72.1.1Columnpmc2002MonupRmonDropFrameCntIndexread-onlycurrentIndex definition for the pmc2002MonupRmonDropFrameCnt table
1.3.6.1.4.1.20044.52.12.4.1.72.1.2Columnpmc2002MonupRmonDropFrameCntValuePortnread-onlycurrentDrop Counter On Client Input :This counter is increased each time a Frame is dropped on the input client port
1.3.6.1.4.1.20044.52.12.4.1.72.1.3Columnpmc2002MonupRmonDropFrameCntErrorPortnread-onlycurrentInput Drop Counter Error :This OID when set indicates the input Drop counter value is invalid on client port
1.3.6.1.4.1.20044.52.12.4.1.72.1.4Columnpmc2002MonupRmonDropFrameCntOverloadPortnread-onlycurrentInput Drop Counter Overload :This OID when set indicates an input Drop counter overload on client port
1.3.6.1.4.1.20044.52.12.4.1.80Tablepmc2002MonupRmonBitsCntTablenot-accessiblecurrentList of pmc2002MonupRmonBitsCnt Article
1.3.6.1.4.1.20044.52.12.4.1.80.1Rowpmc2002MonupRmonBitsCntEntrynot-accessiblecurrentRow definition for the pmc2002MonupRmonBitsCnt table
1.3.6.1.4.1.20044.52.12.4.1.80.1.1Columnpmc2002MonupRmonBitsCntIndexread-onlycurrentIndex definition for the pmc2002MonupRmonBitsCnt table
1.3.6.1.4.1.20044.52.12.4.1.80.1.2Columnpmc2002MonupRmonBitsCntValuePortnread-onlycurrentBits Counter On Client Input :This counter is increased each time a bit is received on the input client port
1.3.6.1.4.1.20044.52.12.4.1.80.1.3Columnpmc2002MonupRmonBitsCntErrorPortnread-onlycurrentInput Bits Counter Error :This OID when set indicates the input Bits counter value is invalid on client port
1.3.6.1.4.1.20044.52.12.4.1.80.1.4Columnpmc2002MonupRmonBitsCntOverloadPortnread-onlycurrentInput Bits Counter Overload :This OID when set indicates an input Bits counter overload on client port
1.3.6.1.4.1.20044.52.12.4.1.88Tablepmc2002MonupRmonUnicastCntTablenot-accessiblecurrentList of pmc2002MonupRmonUnicastCnt Article
1.3.6.1.4.1.20044.52.12.4.1.88.1Rowpmc2002MonupRmonUnicastCntEntrynot-accessiblecurrentRow definition for the pmc2002MonupRmonUnicastCnt table
1.3.6.1.4.1.20044.52.12.4.1.88.1.1Columnpmc2002MonupRmonUnicastCntIndexread-onlycurrentIndex definition for the pmc2002MonupRmonUnicastCnt table
1.3.6.1.4.1.20044.52.12.4.1.88.1.2Columnpmc2002MonupRmonUnicastCntValuePortnread-onlycurrentClient Input Unicast Packets :This counter is increased each time a Unicast packet is received on client input <Help> This counter gives the number of Unicast …
1.3.6.1.4.1.20044.52.12.4.1.88.1.3Columnpmc2002MonupRmonUnicastCntErrorPortnread-onlycurrentInput Unicast Counter Error :This OID when set indicates the input Drop counter value is invalid on client port
1.3.6.1.4.1.20044.52.12.4.1.88.1.4Columnpmc2002MonupRmonUnicastCntOverloadPortnread-onlycurrentInput Unicast Counter Overload :This OID when set indicates an input Drop counter overload on client port
1.3.6.1.4.1.20044.52.12.4.1.96Tablepmc2002MonupRmonNonUnicastCntTablenot-accessiblecurrentList of pmc2002MonupRmonNonUnicastCnt Article
1.3.6.1.4.1.20044.52.12.4.1.96.1Rowpmc2002MonupRmonNonUnicastCntEntrynot-accessiblecurrentRow definition for the pmc2002MonupRmonNonUnicastCnt table
1.3.6.1.4.1.20044.52.12.4.1.96.1.1Columnpmc2002MonupRmonNonUnicastCntIndexread-onlycurrentIndex definition for the pmc2002MonupRmonNonUnicastCnt table
1.3.6.1.4.1.20044.52.12.4.1.96.1.2Columnpmc2002MonupRmonNonUnicastCntValuePortnread-onlycurrentClient Input Not Unicast Packets :This counter is increased each time a Non Unicast packet is received on client input <Help> This counter gives the number of …
1.3.6.1.4.1.20044.52.12.4.1.96.1.3Columnpmc2002MonupRmonNonUnicastCntErrorPortnread-onlycurrentInput Non Unicast Counter Error :This OID when set indicates the input Bits counter value is invalid on client port
1.3.6.1.4.1.20044.52.12.4.1.96.1.4Columnpmc2002MonupRmonNonUnicastCntOverloadPortnread-onlycurrentInput Non Unicast Counter Overload :This OID when set indicates an input Bits counter overload on client port
1.3.6.1.4.1.20044.52.12.4.1.112Tablepmc2002MondwRmonByteCntTablenot-accessiblecurrentList of pmc2002MondwRmonByteCnt Article
1.3.6.1.4.1.20044.52.12.4.1.112.1Rowpmc2002MondwRmonByteCntEntrynot-accessiblecurrentRow definition for the pmc2002MondwRmonByteCnt table
1.3.6.1.4.1.20044.52.12.4.1.112.1.1Columnpmc2002MondwRmonByteCntIndexread-onlycurrentIndex definition for the pmc2002MondwRmonByteCnt table
1.3.6.1.4.1.20044.52.12.4.1.112.1.2Columnpmc2002MondwRmonByteCntValuePortnread-onlycurrentBytes Counter On Client Output :This counter is increased each time a data byte is transmitted on the client port. <Help> This counter gives the number of byte…
1.3.6.1.4.1.20044.52.12.4.1.112.1.3Columnpmc2002MondwRmonByteCntErrorPortnread-onlycurrentOutput Bytes Counter Error :This OID when set indicates the output Bytes counter value is invalid on client port
1.3.6.1.4.1.20044.52.12.4.1.112.1.4Columnpmc2002MondwRmonByteCntOverloadPortnread-onlycurrentOutput Bytes Counter Overload :This OID when set indicates an output Bytes counter overload on client port
1.3.6.1.4.1.20044.52.12.4.1.120Tablepmc2002MondwRmonCrcErrorCntTablenot-accessiblecurrentList of pmc2002MondwRmonCrcErrorCnt Article
1.3.6.1.4.1.20044.52.12.4.1.120.1Rowpmc2002MondwRmonCrcErrorCntEntrynot-accessiblecurrentRow definition for the pmc2002MondwRmonCrcErrorCnt table
1.3.6.1.4.1.20044.52.12.4.1.120.1.1Columnpmc2002MondwRmonCrcErrorCntIndexread-onlycurrentIndex definition for the pmc2002MondwRmonCrcErrorCnt table
1.3.6.1.4.1.20044.52.12.4.1.120.1.2Columnpmc2002MondwRmonCrcErrorCntValuePortnread-onlycurrentCRC Errors Counter On Client Output :This counter is increased each time a CRC error is detected on the output client port <Help> This counter gives the number…
1.3.6.1.4.1.20044.52.12.4.1.120.1.3Columnpmc2002MondwRmonCrcErrorCntErrorPortnread-onlycurrentOutput CRC Errors Counter Error :This OID when set indicates the output CRC Errors counter value is invalid on client port
1.3.6.1.4.1.20044.52.12.4.1.120.1.4Columnpmc2002MondwRmonCrcErrorCntOverloadPortnread-onlycurrentOutput CRC Errors Counter Overload :This OID when set indicates an output CRC Errors counter overload on client port
1.3.6.1.4.1.20044.52.12.4.1.128Tablepmc2002MondwRmonPacketsCntTablenot-accessiblecurrentList of pmc2002MondwRmonPacketsCnt Article
1.3.6.1.4.1.20044.52.12.4.1.128.1Rowpmc2002MondwRmonPacketsCntEntrynot-accessiblecurrentRow definition for the pmc2002MondwRmonPacketsCnt table
1.3.6.1.4.1.20044.52.12.4.1.128.1.1Columnpmc2002MondwRmonPacketsCntIndexread-onlycurrentIndex definition for the pmc2002MondwRmonPacketsCnt table
1.3.6.1.4.1.20044.52.12.4.1.128.1.2Columnpmc2002MondwRmonPacketsCntValuePortnread-onlycurrentPackets Counter On Client Output :This counter is increased each time a packet is transmitted on the client port. <Help> This counter gives the number of packe…
1.3.6.1.4.1.20044.52.12.4.1.128.1.3Columnpmc2002MondwRmonPacketsCntErrorPortnread-onlycurrentOutput Packets Counter Error :This OID when set indicates the output Packets counter value is invalid on client port
1.3.6.1.4.1.20044.52.12.4.1.128.1.4Columnpmc2002MondwRmonPacketsCntOverloadPortnread-onlycurrentOutput Packets Counter Overload :This OID when set indicates an output Packets counter overload on client port
1.3.6.1.4.1.20044.52.12.4.1.136Tablepmc2002MondwRmonBroadcastCntTablenot-accessiblecurrentList of pmc2002MondwRmonBroadcastCnt Article
1.3.6.1.4.1.20044.52.12.4.1.136.1Rowpmc2002MondwRmonBroadcastCntEntrynot-accessiblecurrentRow definition for the pmc2002MondwRmonBroadcastCnt table
1.3.6.1.4.1.20044.52.12.4.1.136.1.1Columnpmc2002MondwRmonBroadcastCntIndexread-onlycurrentIndex definition for the pmc2002MondwRmonBroadcastCnt table
1.3.6.1.4.1.20044.52.12.4.1.136.1.2Columnpmc2002MondwRmonBroadcastCntValuePortnread-onlycurrentBroadcast Counter On Client Output :This counter is increased each time a broadcast packet is transmitted on the client port. <Help> This counter gives the num…
1.3.6.1.4.1.20044.52.12.4.1.136.1.3Columnpmc2002MondwRmonBroadcastCntErrorPortnread-onlycurrentOutput Broadcast Counter Error :This OID when set indicates the output Broadcast counter value is invalid on client port
1.3.6.1.4.1.20044.52.12.4.1.136.1.4Columnpmc2002MondwRmonBroadcastCntOverloadPortnread-onlycurrentOutput Broadcast Counter Overload :This OID when set indicates an output Broadcast counter overload on client port
1.3.6.1.4.1.20044.52.12.4.1.144Tablepmc2002MondwRmonMulticastCntTablenot-accessiblecurrentList of pmc2002MondwRmonMulticastCnt Article
1.3.6.1.4.1.20044.52.12.4.1.144.1Rowpmc2002MondwRmonMulticastCntEntrynot-accessiblecurrentRow definition for the pmc2002MondwRmonMulticastCnt table
1.3.6.1.4.1.20044.52.12.4.1.144.1.1Columnpmc2002MondwRmonMulticastCntIndexread-onlycurrentIndex definition for the pmc2002MondwRmonMulticastCnt table
1.3.6.1.4.1.20044.52.12.4.1.144.1.2Columnpmc2002MondwRmonMulticastCntValuePortnread-onlycurrentMulticast Counter On Client Output :This counter is increased each time a Multicast packet is tra,smitted on the client port. <Help> This counter gives the num…
1.3.6.1.4.1.20044.52.12.4.1.144.1.3Columnpmc2002MondwRmonMulticastCntErrorPortnread-onlycurrentOutput Multicast Counter Error :This OID when set indicates the output Multicast counter value is invalid on client port
1.3.6.1.4.1.20044.52.12.4.1.144.1.4Columnpmc2002MondwRmonMulticastCntOverloadPortnread-onlycurrentOutput Multicast Counter Overload :This OID when set indicates an output Multicast counter overload on client port
1.3.6.1.4.1.20044.52.12.4.1.152Tablepmc2002MondwRmonPauseFrameCntTablenot-accessiblecurrentList of pmc2002MondwRmonPauseFrameCnt Article
1.3.6.1.4.1.20044.52.12.4.1.152.1Rowpmc2002MondwRmonPauseFrameCntEntrynot-accessiblecurrentRow definition for the pmc2002MondwRmonPauseFrameCnt table
1.3.6.1.4.1.20044.52.12.4.1.152.1.1Columnpmc2002MondwRmonPauseFrameCntIndexread-onlycurrentIndex definition for the pmc2002MondwRmonPauseFrameCnt table
1.3.6.1.4.1.20044.52.12.4.1.152.1.2Columnpmc2002MondwRmonPauseFrameCntValuePortnread-onlycurrentPause Counter On Client Output :This counter is increased each time a Pause frame is generated by the PM on the client port
1.3.6.1.4.1.20044.52.12.4.1.152.1.3Columnpmc2002MondwRmonPauseFrameCntErrorPortnread-onlycurrentOutput Pause Counter Error :This OID when set indicates the output Pause counter value is invalid on client port
1.3.6.1.4.1.20044.52.12.4.1.152.1.4Columnpmc2002MondwRmonPauseFrameCntOverloadPortnread-onlycurrentOutput Pause Counter Overload :This OID when set indicates an output Pause counter overload on client port
1.3.6.1.4.1.20044.52.12.4.1.160Tablepmc2002MondwRmonTimerCntTablenot-accessiblecurrentList of pmc2002MondwRmonTimerCnt Article
1.3.6.1.4.1.20044.52.12.4.1.160.1Rowpmc2002MondwRmonTimerCntEntrynot-accessiblecurrentRow definition for the pmc2002MondwRmonTimerCnt table
1.3.6.1.4.1.20044.52.12.4.1.160.1.1Columnpmc2002MondwRmonTimerCntIndexread-onlycurrentIndex definition for the pmc2002MondwRmonTimerCnt table
1.3.6.1.4.1.20044.52.12.4.1.160.1.2Columnpmc2002MondwRmonTimerCntValuePortnread-onlycurrentRMON Timer On Client Output :This is the timing counter dedicated to the downstream RMON counters. It is incremented every 125 us.
1.3.6.1.4.1.20044.52.12.4.1.160.1.3Columnpmc2002MondwRmonTimerCntErrorPortnread-onlycurrentOutput RMON Timer Error :This OID when set indicates the output RMON timer is invalid on client port
1.3.6.1.4.1.20044.52.12.4.1.160.1.4Columnpmc2002MondwRmonTimerCntOverloadPortnread-onlycurrentOutput RMON Timer Overload :This OID when set indicates an output RMON timer overload on client port
1.3.6.1.4.1.20044.52.12.4.1.168Tablepmc2002MondwRmonBitsCntTablenot-accessiblecurrentList of pmc2002MondwRmonBitsCnt Article
1.3.6.1.4.1.20044.52.12.4.1.168.1Rowpmc2002MondwRmonBitsCntEntrynot-accessiblecurrentRow definition for the pmc2002MondwRmonBitsCnt table
1.3.6.1.4.1.20044.52.12.4.1.168.1.1Columnpmc2002MondwRmonBitsCntIndexread-onlycurrentIndex definition for the pmc2002MondwRmonBitsCnt table
1.3.6.1.4.1.20044.52.12.4.1.168.1.2Columnpmc2002MondwRmonBitsCntValuePortnread-onlycurrentBits Counter On Client Output :This counter is increased each time a bit is received on the Output client port
1.3.6.1.4.1.20044.52.12.4.1.168.1.3Columnpmc2002MondwRmonBitsCntErrorPortnread-onlycurrentOutput Bits Counter Error :This OID when set indicates the output Bits counter value is invalid on client port
1.3.6.1.4.1.20044.52.12.4.1.168.1.4Columnpmc2002MondwRmonBitsCntOverloadPortnread-onlycurrentOutput Bits Counter Overload :This OID when set indicates an output Bits counter overload on client port
1.3.6.1.4.1.20044.52.12.4.1.176Tablepmc2002MondwRmonUnicastCntTablenot-accessiblecurrentList of pmc2002MondwRmonUnicastCnt Article
1.3.6.1.4.1.20044.52.12.4.1.176.1Rowpmc2002MondwRmonUnicastCntEntrynot-accessiblecurrentRow definition for the pmc2002MondwRmonUnicastCnt table
1.3.6.1.4.1.20044.52.12.4.1.176.1.1Columnpmc2002MondwRmonUnicastCntIndexread-onlycurrentIndex definition for the pmc2002MondwRmonUnicastCnt table
1.3.6.1.4.1.20044.52.12.4.1.176.1.2Columnpmc2002MondwRmonUnicastCntValuePortnread-onlycurrentUnicast Counter On Client Output :This counter is increased each time a Unicast packet is transmitted on client port <Help> This counter gives the number of Un…
1.3.6.1.4.1.20044.52.12.4.1.176.1.3Columnpmc2002MondwRmonUnicastCntErrorPortnread-onlycurrentOutput Unicast Counter Error :This OID when set indicates the output RMON timer is invalid on client port
1.3.6.1.4.1.20044.52.12.4.1.176.1.4Columnpmc2002MondwRmonUnicastCntOverloadPortnread-onlycurrentOutput Unicast Counter Overload :This OID when set indicates an output RMON timer overload on client port
1.3.6.1.4.1.20044.52.12.4.1.184Tablepmc2002MondwRmonNonUnicastCntTablenot-accessiblecurrentList of pmc2002MondwRmonNonUnicastCnt Article
1.3.6.1.4.1.20044.52.12.4.1.184.1Rowpmc2002MondwRmonNonUnicastCntEntrynot-accessiblecurrentRow definition for the pmc2002MondwRmonNonUnicastCnt table
1.3.6.1.4.1.20044.52.12.4.1.184.1.1Columnpmc2002MondwRmonNonUnicastCntIndexread-onlycurrentIndex definition for the pmc2002MondwRmonNonUnicastCnt table
1.3.6.1.4.1.20044.52.12.4.1.184.1.2Columnpmc2002MondwRmonNonUnicastCntValuePortnread-onlycurrentNon Unicast Counter On Client Output :This counter is increased each time a Non Unicast packet is transmitted on client port <Help> This counter gives the numb…
1.3.6.1.4.1.20044.52.12.4.1.184.1.3Columnpmc2002MondwRmonNonUnicastCntErrorPortnread-onlycurrentOutput Non Unicast Counter Error :This OID when set indicates the output Bits counter value is invalid on client port
1.3.6.1.4.1.20044.52.12.4.1.184.1.4Columnpmc2002MondwRmonNonUnicastCntOverloadPortnread-onlycurrentOutput Non Unicast Counter Overload :This OID when set indicates an output Bits counter overload on client port
1.3.6.1.4.1.20044.52.12.4.2Nodepmc2002RmonLine
1.3.6.1.4.1.20044.52.12.4.3Nodepmc2002RmonOther
1.3.6.1.4.1.20044.52.12.4.3.359Scalarpmc2002MonCountersResetread-writecurrentRMON Counters Reset:This OID resets and restarts all the RMON counters
1.3.6.1.4.1.20044.52.12.4.3.360Scalarpmc2002MonCountersStopread-writecurrentRMON Counters stop:This OID stops all the RMON counters
Type Definitions
NameSyntaxStatusDescription
Pmc2002AdjustValueINTEGER { otxadjustvalue0(0), otxadjustvalue1(1), otxadjustvalue2(2), otxadjustvalue3(3), otxadjustvalue4(4), otxadjustvalue5(5), otxadjustvalue6(6), otxadjustvalue7(7), otxadjustvalue8(8), otxadjustvalue9(9), otxadjustvalue10(10) }currentDifferent values in Adjust mode on OTX-TLH on client and line ports
Pmc2002DccModeINTEGER { dccNo(0), dcctermLine1(1), dcctermLine2(2), dcctermLines12(3), dccmaster(4), dccslaveLine12(7) }currentMode for DCC
Pmc2002ModeINTEGER { modedual(0), modeprotect(1), moderegen(2) }currentDifferent modes for the module
Pmc2002OtxChannelINTEGERcurrentChannel selection on OTX-TLH on client and line ports
Pmc2002OtxGridINTEGER { otxgrid200(200), otxgrid100(100), otxgrid50(50) }currentDifferent grids on OTX-TLH on client and line ports
Pmc2002OtxModeINTEGER { otx80mode(1), otx60mode(2), otxadjustmode(4) }currentDifferent modes on OTX-TLH on client and line ports