EKINOPS-Pm10010mpt-MIB
1021 objects
Creation.
Imported Objects
| EKINOPS-MIB | EkiApiState EkiMeasureType EkiMode ekinops EkiOnOff EkiProtocol EkiState EkiSynchroMode |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.20044.60 | IdentitymodulePm10010mpt | Creation. | ||
| 1.3.6.1.4.1.20044.60.2 | Nodepm10010mptalarms | |||
| 1.3.6.1.4.1.20044.60.2.1 | Nodepm10010mptAlmOther | |||
| 1.3.6.1.4.1.20044.60.2.1.1 | Nodepm10010mptAlmOtherNurg | |||
| 1.3.6.1.4.1.20044.60.2.1.1.2 | Nodepm10010mptAlmsynthAlm2 | |||
| 1.3.6.1.4.1.20044.60.2.1.1.2.1 | Scalarpm10010mptAlmConfTableSave | read-only | current | PM Configuration Save :This OID is at 1 during the saving of a new configuration table in the module Flash memory. <Condtype> CONF_TABLE_SAVE <Probcause> infor… |
| 1.3.6.1.4.1.20044.60.2.1.1.2.2 | Scalarpm10010mptAlmInvUpload | read-only | current | Inventory Upload :This OID is at 1 during the uploading of PM inventory information. <Condtype> INV_UPLOAD <Probcause> informationalStatus(1000) <Alarmtype> ot… |
| 1.3.6.1.4.1.20044.60.2.1.1.2.3 | Scalarpm10010mptAlmConfTableLoad | read-only | current | PM Configuration Load :This OID is at 1 during the loading of configuration tables in the modules RAM. <Condtype> CONF_TABLE_LOAD <Probcause> informationalStat… |
| 1.3.6.1.4.1.20044.60.2.1.1.2.4 | Scalarpm10010mptAlmCorrelatOff | read-only | current | Not Used :This OID, when set, indicates that alarm correlation is not being performed. <Condtype> CORRELAT_OFF <Probcause> informationalStatus(1000) <Alarmtype… |
| 1.3.6.1.4.1.20044.60.2.1.1.2.5 | Scalarpm10010mptAlmMaintenanceOn | read-only | current | Maintenance Mode :This OID indicates that the RM is in maintenance mode. <Help> This alarm indicates that the maintenance mode is enabled on the PM <Condtype> … |
| 1.3.6.1.4.1.20044.60.2.1.2 | Nodepm10010mptAlmOtherUrg | |||
| 1.3.6.1.4.1.20044.60.2.1.3 | Nodepm10010mptAlmOtherCrit | |||
| 1.3.6.1.4.1.20044.60.2.1.3.0 | Nodepm10010mptAlmsynthAlm0 | |||
| 1.3.6.1.4.1.20044.60.2.1.3.0.2 | Scalarpm10010mptAlmFailFan | read-only | current | Fan Fail :This OID is at 1 when any fail occurs on the fan tray <Help> This alarm indicates that the Fan tray module is in a failure condition <Condtype> FAIL_… |
| 1.3.6.1.4.1.20044.60.2.1.3.0.9 | Scalarpm10010mptAlmModGlobFail | read-only | current | Module Failure :This OID is set on detection of a failure originating from the RM <Help> This alarm is set on detection of a failure originating from the equip… |
| 1.3.6.1.4.1.20044.60.2.1.3.0.15 | Scalarpm10010mptAlmDefFuseA | read-only | current | Fuse A Fail :This OID indicates that the fuse of the power input A is in fail condition <Help> Status of the Fuse A <Condtype> DEF_FUSE_A <Probcause> powerProb… |
| 1.3.6.1.4.1.20044.60.2.1.3.0.16 | Scalarpm10010mptAlmDefFuseB | read-only | current | Fuse B Fail :This OID indicates that the fuse of the power input B is in fail condition <Help> Status of the Fuse B <Condtype> DEF_FUSE_B <Probcause> powerProb… |
| 1.3.6.1.4.1.20044.60.2.1.3.40 | Nodepm10010mptAlmclientModuleState | |||
| 1.3.6.1.4.1.20044.60.2.1.3.40.1 | Scalarpm10010mptAlmCfpInitialize | read-only | current | Client Trscv Initialize :This OID indicates the Client Trscv initialization is in progress <Help> Status indicating the Client Trscv initialization is in progr… |
| 1.3.6.1.4.1.20044.60.2.1.3.40.2 | Scalarpm10010mptAlmCfpLowPower | read-only | current | Client Trscv Low Power :This OID indicates the Client Trscv is in low power state <Help> Status indicating the Client Trscv is in low power state <Condtype> CF… |
| 1.3.6.1.4.1.20044.60.2.1.3.40.3 | Scalarpm10010mptAlmCfpHighPowerUp | read-only | current | Client Trscv High Power Up :This OID indicates the Client Trscv is leaving Low Power state <Help> Status indicating the Client Trscv is leaving Low Power state… |
| 1.3.6.1.4.1.20044.60.2.1.3.40.4 | Scalarpm10010mptAlmCfpTxOff | read-only | current | Client Trscv Laser Shutdown :This OID indicates the Client Trscv Laser is OFF <Help> Status indicating the Client Trscv Laser is OFF <Condtype> CFP_TX_OFF <Pro… |
| 1.3.6.1.4.1.20044.60.2.1.3.40.5 | Scalarpm10010mptAlmCfpTxTurnOn | read-only | current | Client Trscv Laser Turn On :This OID indicates the Client Trscv is turning on its laser <Help> Status indicating the Client Trscv is turning on its laser <Cond… |
| 1.3.6.1.4.1.20044.60.2.1.3.40.6 | Scalarpm10010mptAlmCfpReady | read-only | current | Client Trscv Ready :This OID indicates the Client Trscv is ready to operate <Help> Status indicating the Client Trscv is ready to operate <Condtype> CFP_READY … |
| 1.3.6.1.4.1.20044.60.2.1.3.40.7 | Scalarpm10010mptAlmCfpFault | read-only | current | Client Trscv Fault :This OID indicates the Client Trscv is in Fault state <Help> Status indicating the Client Trscv is in Fault state <Condtype> CFP_FAULT <Pro… |
| 1.3.6.1.4.1.20044.60.2.1.3.40.8 | Scalarpm10010mptAlmCfpTxTurnOff | read-only | current | Client Trscv Laser Turn Off :This OID indicates the Client Trscv is turning off its laser <Help> Status indicating the Client Trscv is turning off its laser <C… |
| 1.3.6.1.4.1.20044.60.2.1.3.40.9 | Scalarpm10010mptAlmCfpHighPowerDown | read-only | current | Client Trscv High Power Down :This OID indicates the Client Trscv is entering Low Power state <Help> Status indicating the Client Trscv is entering Low Power s… |
| 1.3.6.1.4.1.20044.60.2.1.3.41 | Nodepm10010mptAlmclientModuleGeneralStatus | |||
| 1.3.6.1.4.1.20044.60.2.1.3.41.4 | Scalarpm10010mptAlmCfpOutOfAlignment | read-only | current | Client Trscv Out Of Alignment :This OID indicates an Out of alignment on the Client Trscv Host Interface <Help> Alarm indicating an Out of alignment on the Cli… |
| 1.3.6.1.4.1.20044.60.2.1.3.41.5 | Scalarpm10010mptAlmCfpRxNetworkLol | read-only | current | Client Trscv Rx Network Loss Of Lock :This OID indicates of Loss of Lock is dected on the Client Trscv Rx Network interface <Help> Alarm indicating of Loss of … |
| 1.3.6.1.4.1.20044.60.2.1.3.41.6 | Scalarpm10010mptAlmCfpRxLos | read-only | current | Client Trscv Loss Of Signal :This OID indicates a Loss of Signal is detected on the Client Trscv <Help> Alarm indicating a Loss of Signal is detected on the Cl… |
| 1.3.6.1.4.1.20044.60.2.1.3.41.7 | Scalarpm10010mptAlmCfpTxHostLol | read-only | current | Client Trscv Tx Host Loss Of Lock :This OID indicates of Loss of Lock is detected on the Client Trscv Tx Host interface <Help> Alarm indicating of Loss of Lock… |
| 1.3.6.1.4.1.20044.60.2.1.3.41.8 | Scalarpm10010mptAlmCfpTxLosf | read-only | current | Client Trscv Loss Of Signal Functionality :This OID indicates a Loss of Signal functionality is detected on the Client Trscv <Help> Alarm indicating a Loss of … |
| 1.3.6.1.4.1.20044.60.2.1.3.41.9 | Scalarpm10010mptAlmCfpTxCmuLol | read-only | current | Client Trscv CMU Loss Of Lock :This OID indicates a Clock Multiplier Unit Loss of Lock is detected on the Client Trscv <Help> Alarm indicating a Clock Multipli… |
| 1.3.6.1.4.1.20044.60.2.1.3.41.10 | Scalarpm10010mptAlmCfpTxJitterPllLol | read-only | current | Client Trscv Tx Jitter PLL Loss Of Lock :This OID indicates a Tx Jitter PLL Loss of Lock is dtected on the Client Trscv <Help> Alarm indicating a Tx Jitter PLL… |
| 1.3.6.1.4.1.20044.60.2.1.3.41.11 | Scalarpm10010mptAlmCfpLossOfRefclk | read-only | current | Client Trscv Loss Of Ref Clock :This OID indicates a Loss of Reference clock is detected on the Client Trscv <Help> Alarm indicating a Loss of Reference clock … |
| 1.3.6.1.4.1.20044.60.2.1.3.41.14 | Scalarpm10010mptAlmCfpHwInterlock | read-only | current | Client Trscv Hardware Interlock :This OID indicates the Client Trscv power is higher than the cooling capacity <Help> Alarm indicating the Client Trscv power i… |
| 1.3.6.1.4.1.20044.60.2.1.3.42 | Nodepm10010mptAlmclientGlobalAlarmSummary | |||
| 1.3.6.1.4.1.20044.60.2.1.3.42.1 | Scalarpm10010mptAlmCfpSoftGlobAlarmTest | read-only | current | Client Trscv Global Alarm SW Test :This OID indicates the Client Trscv Global Alarm This OID is raised by SW request for test purpose <Help> Status indicating … |
| 1.3.6.1.4.1.20044.60.2.1.3.42.7 | Scalarpm10010mptAlmCfpNetworkLaneAlarmWarning2 | read-only | current | Client Trscv Network Alarm And Warning 2 :This OID indicates at least one DDM is detected on the Client Trscv Network Interface <Help> Synthesis alarm indicati… |
| 1.3.6.1.4.1.20044.60.2.1.3.42.8 | Scalarpm10010mptAlmCfpModuleState | read-only | current | Client Trscv Module State :This OID indicates the Client Trscv module state <Help> Synthesis alarm indicating the Client Trscv module state <Condtype> CFP_MODU… |
| 1.3.6.1.4.1.20044.60.2.1.3.42.9 | Scalarpm10010mptAlmCfpModuleGeneralStatus | read-only | current | Client Trscv General Status :This OID indicates the Client Trscv module general status <Help> Synthesis alarm indicating the Client Trscv module general status… |
| 1.3.6.1.4.1.20044.60.2.1.3.42.10 | Scalarpm10010mptAlmCfpModuleFault | read-only | current | Client Trscv Module Fault :This OID indicates at least one Fault is detected on the Client Trscv module <Help> Synthesis alarm indicating at least one Fault is… |
| 1.3.6.1.4.1.20044.60.2.1.3.42.11 | Scalarpm10010mptAlmCfpModuleAlarmWarning1 | read-only | current | Client Trscv Module Alarm And Warning 1 :This OID indicates at least one DDM This OID is detected on the Client Trscv module <Help> Synthesis alarm indicating … |
| 1.3.6.1.4.1.20044.60.2.1.3.42.12 | Scalarpm10010mptAlmCfpModuleAlarmWarning2 | read-only | current | Client Trscv Module Alarm And Warning 2 :This OID indicates at least one DDM is detected on the Client Trscv module <Help> Synthesis alarm indicating at least … |
| 1.3.6.1.4.1.20044.60.2.1.3.42.13 | Scalarpm10010mptAlmCfpNetworkLaneAlarmWarning1 | read-only | current | Client Trscv Network Alarm And Warning 1 :This OID indicates at least one DDM is detected on the Client Trscv Network Interface <Help> Synthesis alarm indicati… |
| 1.3.6.1.4.1.20044.60.2.1.3.42.14 | Scalarpm10010mptAlmCfpNetworkLaneFaultStatus | read-only | current | Client Trscv Network Fault And Status :This OID indicates at least one Fault or Status is detected on the Client Trscv Network Interface <Help> Synthesis alarm… |
| 1.3.6.1.4.1.20044.60.2.1.3.42.15 | Scalarpm10010mptAlmCfpHostLaneFaultStatus | read-only | current | Client Trscv Host Fault And Status :This OID indicates at least one Fault or Status is detected on the Client Trscv Host Interface <Help> Synthesis alarm indic… |
| 1.3.6.1.4.1.20044.60.2.1.3.42.16 | Scalarpm10010mptAlmCfpGlobAlarmAssertion | read-only | current | Client Trscv Global Alarm :This OID indicates at least one Fault or Status is detected on the Client Trscv module <Help> Synthesis alarm indicating at least on… |
| 1.3.6.1.4.1.20044.60.2.1.3.46 | Nodepm10010mptAlmmsaModuleState | |||
| 1.3.6.1.4.1.20044.60.2.1.3.46.1 | Scalarpm10010mptAlmMsaInitialize | read-only | current | Line Trscv Initialize :This OID indicates the Line Trscv initialization is in progress <Help> Status indicating the Line Trscv initialization is in progress <C… |
| 1.3.6.1.4.1.20044.60.2.1.3.46.2 | Scalarpm10010mptAlmMsaLowPower | read-only | current | Line Trscv Low Power :This OID indicates the Line Trscv is in low power state <Help> Status indicating the Line Trscv is in low power state <Condtype> MSA_LOW_… |
| 1.3.6.1.4.1.20044.60.2.1.3.46.3 | Scalarpm10010mptAlmMsaHighPowerUp | read-only | current | Line Trscv High Power Up :This OID indicates the Line Trscv is leaving Low Power state <Help> Status indicating the Line Trscv is leaving Low Power state <Cond… |
| 1.3.6.1.4.1.20044.60.2.1.3.46.4 | Scalarpm10010mptAlmMsaTxOff | read-only | current | Line Trscv Laser Shutdown :This OID indicates the Line Trscv Laser is OFF <Help> Status indicating the Line Trscv Laser is OFF <Condtype> MSA_TX_OFF <Probcause… |
| 1.3.6.1.4.1.20044.60.2.1.3.46.5 | Scalarpm10010mptAlmMsaTxTurnOn | read-only | current | Line Trscv Laser Turn On :This OID indicates the Line Trscv is turning on its laser <Help> Status indicating the Line Trscv is turning on its laser <Condtype> … |
| 1.3.6.1.4.1.20044.60.2.1.3.46.6 | Scalarpm10010mptAlmMsaReady | read-only | current | Line Trscv Ready :This OID indicates the Line Trscv is ready to operate <Help> Status indicating the Line Trscv is ready to operate <Condtype> MSA_READY <Probc… |
| 1.3.6.1.4.1.20044.60.2.1.3.46.7 | Scalarpm10010mptAlmMsaFault | read-only | current | Line Trscv Fault :This OID indicates the Line Trscv is in Fault state <Help> Status indicating the Line Trscv is in Fault state <Condtype> MSA_FAULT <Probcause… |
| 1.3.6.1.4.1.20044.60.2.1.3.46.8 | Scalarpm10010mptAlmMsaTxTurnOff | read-only | current | Line Trscv Laser Turn Off :This OID indicates the Line Trscv is turning off its laser <Help> Status indicating the Line Trscv is turning off its laser <Condtyp… |
| 1.3.6.1.4.1.20044.60.2.1.3.46.9 | Scalarpm10010mptAlmMsaHighPowerDown | read-only | current | Line Trscv High Power Down :This OID indicates the Line Trscv is entering Low Power state <Help> Status indicating the Line Trscv is entering Low Power state <… |
| 1.3.6.1.4.1.20044.60.2.1.3.47 | Nodepm10010mptAlmmsaModuleGeneralStatus | |||
| 1.3.6.1.4.1.20044.60.2.1.3.47.4 | Scalarpm10010mptAlmMsaOutOfAlignment | read-only | current | Line Trscv Out Of Alignment :This OID indicates an Out of alignment on the Line Trscv Host Interface <Help> Alarm indicating an Out of alignment on the Line Tr… |
| 1.3.6.1.4.1.20044.60.2.1.3.47.5 | Scalarpm10010mptAlmMsaRxNetworkLol | read-only | current | Line Trscv Rx Network Loss Of Lock :This OID indicates of Loss of Lock is detected on the Line Trscv Rx Network interface <Help> Alarm indicating of Loss of Lo… |
| 1.3.6.1.4.1.20044.60.2.1.3.47.6 | Scalarpm10010mptAlmMsaRxLos | read-only | current | Line Trscv Loss Of Signal :This OID indicates a Loss of Signal is detected on the Line Trscv <Help> Alarm indicating a Loss of Signal is detected on the Line T… |
| 1.3.6.1.4.1.20044.60.2.1.3.47.7 | Scalarpm10010mptAlmMsaTxHostLol | read-only | current | Line Trscv Tx Host Loss Of Lock :This OID indicates of Loss of Lock is detected on the Line Trscv Tx Host interface <Help> Alarm indicating of Loss of Lock is … |
| 1.3.6.1.4.1.20044.60.2.1.3.47.8 | Scalarpm10010mptAlmMsaTxLosf | read-only | current | Line Trscv Loss Of Signal Functionality :This OID indicates a Loss of Signal functionality is detected on the Line Trscv <Help> Alarm indicating a Loss of Sign… |
| 1.3.6.1.4.1.20044.60.2.1.3.47.9 | Scalarpm10010mptAlmMsaTxCmuLol | read-only | current | Line Trscv CMU Loss Of Lock :This OID indicates a Clock Multiplier Unit Loss of Lock is detected on the Line Trscv <Help> Alarm indicating a Clock Multiplier U… |
| 1.3.6.1.4.1.20044.60.2.1.3.47.10 | Scalarpm10010mptAlmMsaTxJitterPllLol | read-only | current | Line Trscv Tx Jitter PLL Loss Of Lock :This OID indicates a Tx Jitter PLL Loss of Lock is detected on the Line Trscv <Help> Alarm indicating a Tx Jitter PLL Lo… |
| 1.3.6.1.4.1.20044.60.2.1.3.47.11 | Scalarpm10010mptAlmMsaLossOfRefclk | read-only | current | Line Trscv Loss Of Ref Clock :This OID indicates a Loss of Reference clock is detected on the Line Trscv <Help> Alarm indicating a Loss of Reference clock is d… |
| 1.3.6.1.4.1.20044.60.2.1.3.47.14 | Scalarpm10010mptAlmMsaHwInterlock | read-only | current | Line Trscv Hardware Interlock :This OID indicates the Line Trscv power is higher than the cooling capacity <Help> Alarm indicating the Line Trscv power is high… |
| 1.3.6.1.4.1.20044.60.2.1.3.48 | Nodepm10010mptAlmmsaGlobalAlarmSummary | |||
| 1.3.6.1.4.1.20044.60.2.1.3.48.1 | Scalarpm10010mptAlmMsaSoftGlobAlarmTest | read-only | current | Line Trscv Global Alarm SW Test :This OID indicates the Line Trscv Global alarm This OID is raised by SW request for test purpose <Help> Status indicating the … |
| 1.3.6.1.4.1.20044.60.2.1.3.48.6 | Scalarpm10010mptAlmMsaNetworkHostAlarmStatus | read-only | current | Line Trscv Network/Host Alarm Status :This OID indicates the state of the Network and Host interface of the Line Trscv <Help> Synthesis alarm indicating the al… |
| 1.3.6.1.4.1.20044.60.2.1.3.48.7 | Scalarpm10010mptAlmMsaNetworkLaneAlarmWarning2 | read-only | current | Line Trscv Network Alarm And Warning 2 :This OID indicates at least one DDM This OID is detected on the Line Trscv Network Interface <Help> Synthesis alarm ind… |
| 1.3.6.1.4.1.20044.60.2.1.3.48.8 | Scalarpm10010mptAlmMsaModuleState | read-only | current | Line Trscv Module State :This OID indicates the Line Trscv module state <Help> Synthesis alarm indicating the Line Trscv module state <Condtype> MSA_MODULE_STA… |
| 1.3.6.1.4.1.20044.60.2.1.3.48.9 | Scalarpm10010mptAlmMsaModuleGeneralStatus | read-only | current | Line Trscv General Status :This OID indicates the Line Trscv module general <Help> Synthesis alarm indicating the Line Trscv module general status <Condtype> M… |
| 1.3.6.1.4.1.20044.60.2.1.3.48.10 | Scalarpm10010mptAlmModuleFault | read-only | current | Line Trscv Module Fault :This OID indicates at least one Fault is detected on the Line Trscv module <Help> Synthesis alarm indicating at least one Fault is det… |
| 1.3.6.1.4.1.20044.60.2.1.3.48.11 | Scalarpm10010mptAlmMsaModuleAlarmWarning1 | read-only | current | Line Trscv Module Alarm And Warning 1 :This OID indicates at least one DDM is detected on the Line Trscv module <Help> Synthesis alarm indicating at least one … |
| 1.3.6.1.4.1.20044.60.2.1.3.48.12 | Scalarpm10010mptAlmMsaModuleAlarmWarning2 | read-only | current | Line Trscv Module Alarm And Warning 2 :This OID indicates at least one DDM is detected on the Line Trscv module <Help> Synthesis alarm indicating at least one … |
| 1.3.6.1.4.1.20044.60.2.1.3.48.13 | Scalarpm10010mptAlmMsaNetworkLaneAlarmWarning1 | read-only | current | Line Trscv Network Alarm And Warning 1 :This OID indicates at least one DDM is detected on the Line Trscv Network Interface <Help> Synthesis alarm indicating a… |
| 1.3.6.1.4.1.20044.60.2.1.3.48.14 | Scalarpm10010mptAlmMsaNetworkLaneFaultStatus | read-only | current | Line Trscv Network Fault And Status :This OID indicates at least one Fault or Status is detected on the Line Trscv Network Interface <Help> Synthesis alarm ind… |
| 1.3.6.1.4.1.20044.60.2.1.3.48.15 | Scalarpm10010mptAlmMsaHostLaneFaultStatus | read-only | current | Line Trscv Host Fault And Status :This OID indicates at least one Fault or Status is detected on the Line Trscv Host Interface <Help> Synthesis alarm indicatin… |
| 1.3.6.1.4.1.20044.60.2.1.3.48.16 | Scalarpm10010mptAlmMsaGlobAlarmAssertion | read-only | current | Line Trscv Global Alarm :This OID indicates at least one Fault or Status is detected on the Line Trscv module <Help> Synthesis alarm indicating at least one Al… |
| 1.3.6.1.4.1.20044.60.2.1.3.49 | Nodepm10010mptAlmmsaNetworkTxAlignment | |||
| 1.3.6.1.4.1.20044.60.2.1.3.49.12 | Scalarpm10010mptAlmNetTxTimingFault | read-only | current | Line Trscv Network Tx Timing Fault :This OID indicates a Tx Timing Fault is detected on the Line Trscv Network interface <Help> Alarm indicating a Tx Timing Fa… |
| 1.3.6.1.4.1.20044.60.2.1.3.49.13 | Scalarpm10010mptAlmNetTxReferenceClockFault | read-only | current | Line Trscv Network Tx Ref Clock Fault :This OID indicates a Tx Reference Clock Fault is detected on the Line Trscv Network interface <Help> Alarm indicating a … |
| 1.3.6.1.4.1.20044.60.2.1.3.49.14 | Scalarpm10010mptAlmNetTxCmuLockFault | read-only | current | Line Trscv Network Tx CMU Lock Fault :This OID indicates a Tx Clock Multiplier Unit Lock Fault is detected on the Line Trscv Network interface <Help> Alarm ind… |
| 1.3.6.1.4.1.20044.60.2.1.3.49.15 | Scalarpm10010mptAlmNetTxOutOfAlignment | read-only | current | Line Trscv Network Tx Out Of Alignment :This OID indicates a Tx Out of Alignment is detected on the Line Trscv Network interface <Help> Alarm indicating a Tx O… |
| 1.3.6.1.4.1.20044.60.2.1.3.49.16 | Scalarpm10010mptAlmNetTxLossOfAlignment | read-only | current | Line Trscv Network Tx Loss Of Alignment :This OID indicates a Tx Loss of Alignment is detected on the Line Trscv Network interface <Help> Alarm indicating a Tx… |
| 1.3.6.1.4.1.20044.60.2.1.3.50 | Nodepm10010mptAlmmsaNetworkRxAlignment | |||
| 1.3.6.1.4.1.20044.60.2.1.3.50.12 | Scalarpm10010mptAlmNetRxTimingFault | read-only | current | Line Trscv Network Rx Timing Fault :This OID indicates a Rx Timing Fault is detected on the Line Trscv Network interface <Help> Alarm indicating a Rx Timing Fa… |
| 1.3.6.1.4.1.20044.60.2.1.3.50.13 | Scalarpm10010mptAlmNetRxOutOfAlignment | read-only | current | Line Trscv Network Rx Out Of Alignment :This OID indicates a Rx Out of Alignment is detected on the Line Trscv Network interface <Help> Alarm indicating a Rx O… |
| 1.3.6.1.4.1.20044.60.2.1.3.50.14 | Scalarpm10010mptAlmNetRxLossOfAlignment | read-only | current | Line Trscv Network Rx Loss Of Alignment :This OID indicates a Rx Loss of Alignment is detected on the Line Trscv Network interface <Help> Alarm indicating a Rx… |
| 1.3.6.1.4.1.20044.60.2.1.3.50.15 | Scalarpm10010mptAlmNetRxModemLockFault | read-only | current | Line Trscv Network Rx Modem Lock Fault :This OID indicates a Rx Modem Lock Fault is detected on the Line Trscv Network interface <Help> Alarm indicating a Rx M… |
| 1.3.6.1.4.1.20044.60.2.1.3.50.16 | Scalarpm10010mptAlmNetRxModemSyncDetectFault | read-only | current | Line Trscv Network Rx Modem Sync Detect Fault :This OID indicates a Rx Modem Synchronisation Detection Fault is detected on the Line Trscv Network interface <H… |
| 1.3.6.1.4.1.20044.60.2.1.3.51 | Nodepm10010mptAlmmsaNetworkHostNetworkAlarmSummary | |||
| 1.3.6.1.4.1.20044.60.2.1.3.51.11 | Scalarpm10010mptAlmNetworkTxAlignment | read-only | current | Line Trscv Network Tx Alignment :This OID indicates a Tx Alignment Fault is detected on the Line Trscv Network interface <Help> Synthesis Alarm indicating a Tx… |
| 1.3.6.1.4.1.20044.60.2.1.3.51.12 | Scalarpm10010mptAlmNetworkRxAlignment | read-only | current | Line Trscv Network Rx Alignment :This OID indicates a Rx Alignment Fault is detected on the Line Trscv Network interface <Help> Synthesis Alarm indicating a Rx… |
| 1.3.6.1.4.1.20044.60.2.1.3.51.13 | Scalarpm10010mptAlmNetworkRxOtn | read-only | current | Line Trscv Network Rx OTN :This OID indicates a Rx OTN Fault is detected on the Line Trscv Network interface <Help> Synthesis Alarm indicating a Rx OTN Fault i… |
| 1.3.6.1.4.1.20044.60.2.1.3.51.14 | Scalarpm10010mptAlmHostRxAlignment | read-only | current | Line Trscv Host Rx Alignment :This OID indicates a Rx Alignment Fault is detected on the Line Trscv Host interface <Help> Synthesis Alarm indicating a Rx Align… |
| 1.3.6.1.4.1.20044.60.2.1.3.51.15 | Scalarpm10010mptAlmHostTxAlignment | read-only | current | Line Trscv Host Tx Alignment :This OID indicates a Tx Alignment Fault is detected on the Line Trscv Host interface <Help> Synthesis Alarm indicating a Tx Align… |
| 1.3.6.1.4.1.20044.60.2.1.3.51.16 | Scalarpm10010mptAlmHostTxOtnStatus | read-only | current | Line Trscv Host Tx OTN :This OID indicates a Tx OTN Fault is detected on the Line Trscv Host interface <Help> Synthesis Alarm indicating a Tx OTN Fault is dete… |
| 1.3.6.1.4.1.20044.60.2.1.3.52 | Nodepm10010mptAlmmsaHostTxAlignment | |||
| 1.3.6.1.4.1.20044.60.2.1.3.52.13 | Scalarpm10010mptAlmHostTxDeskewLockFault | read-only | current | Line Trscv Host Tx Deskew Lock Fault :This OID indicates a Tx Deskew Lock Fault is detected on the Line Trscv Host interface <Help> Alarm indicating a Tx Deske… |
| 1.3.6.1.4.1.20044.60.2.1.3.52.14 | Scalarpm10010mptAlmHostTxOutOfAlignment | read-only | current | Line Trscv Host Tx Out Of Alignment :This OID indicates a Tx Out of Alignment is detected on the Line Trscv Host interface <Help> Alarm indicating a Tx Out of … |
| 1.3.6.1.4.1.20044.60.2.1.3.52.15 | Scalarpm10010mptAlmHostTxLossOfAlignment | read-only | current | Line Trscv Host Tx Loss Of Alignment :This OID indicates a Tx Loss of Alignment is detected on the Line Trscv Host interface <Help> Alarm indicating a Tx Loss … |
| 1.3.6.1.4.1.20044.60.2.1.3.52.16 | Scalarpm10010mptAlmHostTxCdrLockFault | read-only | current | Line Trscv Host Tx CDR Lock Fault :This OID indicates a Tx Clock Data Recovery Lock Fault is detected on the Line Trscv Host interface <Help> Alarm indicating … |
| 1.3.6.1.4.1.20044.60.2.1.3.53 | Nodepm10010mptAlmmsaHostRxAlignment | |||
| 1.3.6.1.4.1.20044.60.2.1.3.53.14 | Scalarpm10010mptAlmHostRxCmuLockFault | read-only | current | Line Trscv Host Rx CMU Lock Fault :This OID indicates a Rx Clock Multiplier Unit Lock Fault is detected on the Line Trscv Host interface <Help> Alarm indicatin… |
| 1.3.6.1.4.1.20044.60.2.1.3.53.15 | Scalarpm10010mptAlmHostRxOutOfAlignment | read-only | current | Line Trscv Host Rx Out Of Alignment :This OID indicates a Rx Out of Alignment is detected on the Line Trscv Host interface <Help> Alarm indicating a Rx Out of … |
| 1.3.6.1.4.1.20044.60.2.1.3.53.16 | Scalarpm10010mptAlmHostRxLossOfAlignment | read-only | current | Line Trscv Host Rx Loss Of Alignment :This OID indicates a Rx Loss of Alignment is detected on the Line Trscv Host interface <Help> Alarm indicating a Rx Loss … |
| 1.3.6.1.4.1.20044.60.2.2 | Nodepm10010mptAlmClient | |||
| 1.3.6.1.4.1.20044.60.2.2.1 | Nodepm10010mptAlmClientNurg | |||
| 1.3.6.1.4.1.20044.60.2.2.1.56 | Tablepm10010mptAlmclientNetworkLaneAlarmWarningTable | not-accessible | current | List of pm10010mptAlmclientNetworkLaneAlarmWarning Article |
| 1.3.6.1.4.1.20044.60.2.2.1.56.1 | Rowpm10010mptAlmclientNetworkLaneAlarmWarningEntry | not-accessible | current | Row definition for the pm10010mptAlmclientNetworkLaneAlarmWarning table |
| 1.3.6.1.4.1.20044.60.2.2.1.56.1.1 | Columnpm10010mptAlmclientNetworkLaneAlarmWarningIndex | read-only | current | Index definition for the pm10010mptAlmclientNetworkLaneAlarmWarning table |
| 1.3.6.1.4.1.20044.60.2.2.1.56.1.2 | Columnpm10010mptAlmClientRxPowerLowAlarmPortn | read-only | current | Client Trscv Rx Power Low Alarm :This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indic… |
| 1.3.6.1.4.1.20044.60.2.2.1.56.1.3 | Columnpm10010mptAlmClientRxPowerLowWarningPortn | read-only | current | Client Trscv Rx Power Low Warning :This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM <Help> Warning i… |
| 1.3.6.1.4.1.20044.60.2.2.1.56.1.4 | Columnpm10010mptAlmClientRxPowerHighWarningPortn | read-only | current | Client Trscv Rx Power High Warning :This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM <Help> Warning… |
| 1.3.6.1.4.1.20044.60.2.2.1.56.1.5 | Columnpm10010mptAlmClientRxPowerHighAlarmPortn | read-only | current | Client Trscv Rx Power High Alarm :This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM <Help> Alarm ind… |
| 1.3.6.1.4.1.20044.60.2.2.1.56.1.6 | Columnpm10010mptAlmLaserTempLowAlarmPortn | read-only | current | Client Trscv Laser Temp Low Alarm :This OID indicates that the Trscv Laser Temperature is lower than the threshold value written in the Trscv EEPROM <Help> Ala… |
| 1.3.6.1.4.1.20044.60.2.2.1.56.1.7 | Columnpm10010mptAlmClientLaserTempLowWarningPortn | read-only | current | Client Trscv Laser Temp Low Warning :This OID indicates that the Trscv Laser Temperature is lower than the threshold value written in the Trscv EEPROM <Help> W… |
| 1.3.6.1.4.1.20044.60.2.2.1.56.1.8 | Columnpm10010mptAlmClientLaserTempHighWarningPortn | read-only | current | Client Trscv Laser Temp High Warning :This OID indicates that the Trscv Laser Temperature is higher than the threshold value written in the Trscv EEPROM <Help>… |
| 1.3.6.1.4.1.20044.60.2.2.1.56.1.9 | Columnpm10010mptAlmClientLaserTempHighAlarmPortn | read-only | current | Client Trscv Laser Temp High Alarm :This OID indicates that the Trscv Laser Temperature is higher than the threshold value written in the Trscv EEPROM <Help> A… |
| 1.3.6.1.4.1.20044.60.2.2.1.56.1.10 | Columnpm10010mptAlmClientTxPowerLowAlarmPortn | read-only | current | Client Trscv Tx Power Low Alarm :This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indi… |
| 1.3.6.1.4.1.20044.60.2.2.1.56.1.11 | Columnpm10010mptAlmClientTxPowerLowWarningPortn | read-only | current | Client Trscv Tx Power Low Warning :This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM <Help> Warning … |
| 1.3.6.1.4.1.20044.60.2.2.1.56.1.12 | Columnpm10010mptAlmClientTxPowerHighWarningPortn | read-only | current | Client Trscv Tx Power High Warning :This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM <Help> Warnin… |
| 1.3.6.1.4.1.20044.60.2.2.1.56.1.13 | Columnpm10010mptAlmClientTxPowerHighAlarmPortn | read-only | current | Client Trscv Tx Power High Alarm :This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM <Help> Alarm in… |
| 1.3.6.1.4.1.20044.60.2.2.1.56.1.14 | Columnpm10010mptAlmClientBiasLowAlarmPortn | read-only | current | Client Trscv Bias Low Alarm :This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Alarm in… |
| 1.3.6.1.4.1.20044.60.2.2.1.56.1.15 | Columnpm10010mptAlmClientBiasLowWarningPortn | read-only | current | Client Trscv Bias Low Warning :This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Warnin… |
| 1.3.6.1.4.1.20044.60.2.2.1.56.1.16 | Columnpm10010mptAlmClientBiasHighWarningPortn | read-only | current | Client Trscv Bias High Warning :This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Warn… |
| 1.3.6.1.4.1.20044.60.2.2.1.56.1.17 | Columnpm10010mptAlmClientBiasHighAlarmPortn | read-only | current | Client Trscv Bias High Alarm :This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Alarm … |
| 1.3.6.1.4.1.20044.60.2.2.1.232 | Tablepm10010mptAlmclientSfpWarnDdmTable | not-accessible | current | List of pm10010mptAlmclientSfpWarnDdm Article |
| 1.3.6.1.4.1.20044.60.2.2.1.232.1 | Rowpm10010mptAlmclientSfpWarnDdmEntry | not-accessible | current | Row definition for the pm10010mptAlmclientSfpWarnDdm table |
| 1.3.6.1.4.1.20044.60.2.2.1.232.1.1 | Columnpm10010mptAlmclientSfpWarnDdmIndex | read-only | current | Index definition for the pm10010mptAlmclientSfpWarnDdm table |
| 1.3.6.1.4.1.20044.60.2.2.1.232.1.2 | Columnpm10010mptAlmTxPwLowWngPortn | read-only | current | Client Trscv Tx Power Low Warning :This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM <Help> Warning … |
| 1.3.6.1.4.1.20044.60.2.2.1.232.1.3 | Columnpm10010mptAlmTxPwrHighWngPortn | read-only | current | Client Trscv Tx Power High Warning :This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM <Help> Warnin… |
| 1.3.6.1.4.1.20044.60.2.2.1.232.1.4 | Columnpm10010mptAlmTxBiasLowWngPortn | read-only | current | Client Trscv Bias Low Warning :This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Warnin… |
| 1.3.6.1.4.1.20044.60.2.2.1.232.1.5 | Columnpm10010mptAlmTxBiasHighWngPortn | read-only | current | Client Trscv Bias High Warning :This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Warn… |
| 1.3.6.1.4.1.20044.60.2.2.1.232.1.6 | Columnpm10010mptAlmVccLowWngPortn | read-only | current | Client Trscv Power Supply Low Warning :This OID indicates that the Trscv power supply is lower than the threshold value written in the Trscv EEPROM <Help> Warn… |
| 1.3.6.1.4.1.20044.60.2.2.1.232.1.7 | Columnpm10010mptAlmVccHighWngPortn | read-only | current | Client Trscv Power Supply High Warning :This OID indicates that the Trscv power supply is higher than the threshold value written in the Trscv EEPROM <Help> Wa… |
| 1.3.6.1.4.1.20044.60.2.2.1.232.1.8 | Columnpm10010mptAlmTempLowWngPortn | read-only | current | Client Trscv Temp Low Warning :This OID indicates that the Trscv temperature is lower than the threshold value written in the Trscv EEPROM <Help> Warning indic… |
| 1.3.6.1.4.1.20044.60.2.2.1.232.1.9 | Columnpm10010mptAlmTempHighWngPortn | read-only | current | Client Trscv Temp High Warning :This OID indicates that the Trscv temperature is higher than the threshold value written in the Trscv EEPROM <Help> Warning ind… |
| 1.3.6.1.4.1.20044.60.2.2.1.232.1.16 | Columnpm10010mptAlmRxPwrLowWngPortn | read-only | current | Client Trscv Rx Power Low Warning :This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM <Help> Warning i… |
| 1.3.6.1.4.1.20044.60.2.2.1.232.1.17 | Columnpm10010mptAlmRxPwrHighWngPortn | read-only | current | Client Trscv Rx Power High Warning :This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM <Help> Warning… |
| 1.3.6.1.4.1.20044.60.2.2.2 | Nodepm10010mptAlmClientUrg | |||
| 1.3.6.1.4.1.20044.60.2.2.2.72 | Tablepm10010mptAlmclientNetworkLaneFaultTable | not-accessible | current | List of pm10010mptAlmclientNetworkLaneFault Article |
| 1.3.6.1.4.1.20044.60.2.2.2.72.1 | Rowpm10010mptAlmclientNetworkLaneFaultEntry | not-accessible | current | Row definition for the pm10010mptAlmclientNetworkLaneFault table |
| 1.3.6.1.4.1.20044.60.2.2.2.72.1.1 | Columnpm10010mptAlmclientNetworkLaneFaultIndex | read-only | current | Index definition for the pm10010mptAlmclientNetworkLaneFault table |
| 1.3.6.1.4.1.20044.60.2.2.2.72.1.4 | Columnpm10010mptAlmClientLaneRxFifoErrorPortn | read-only | current | Client Network Lane Rx FIFO Error :This OID indicates a Rx FIFO Error on the Client Trscv Network Lane <Help> Alarm indicating a Rx FIFO Error on the Client Tr… |
| 1.3.6.1.4.1.20044.60.2.2.2.72.1.5 | Columnpm10010mptAlmClientLaneRxLolPortn | read-only | current | Client Network Lane Rx Loss Of Lock :This OID indicates a Rx Loss of Lock on the Client Trscv Network Lane <Help> Alarm indicating a Rx Loss of Lock on the Cli… |
| 1.3.6.1.4.1.20044.60.2.2.2.72.1.6 | Columnpm10010mptAlmClientLaneRxLosPortn | read-only | current | Client Network Lane Rx Loss Of Signal :This OID indicates a Rx Loss of Signal on the Client Trscv Network Lane <Help> Alarm indicating a Rx Loss of Signal on t… |
| 1.3.6.1.4.1.20044.60.2.2.2.72.1.8 | Columnpm10010mptAlmClientLaneTxLolPortn | read-only | current | Client Network Lane Tx Loss Of Lock :This OID indicates a Tx Loss of Lock on the Client Trscv Network Lane <Help> Alarm indicating a Tx Loss of Lock on the Cli… |
| 1.3.6.1.4.1.20044.60.2.2.2.72.1.9 | Columnpm10010mptAlmClientLaneTxLosfPortn | read-only | current | Client Network Lane Tx Loss Of Signal Functionality :This OID indicates a Tx Loss of Signal Functionality on the Client Trscv Network Lane <Help> Alarm indicat… |
| 1.3.6.1.4.1.20044.60.2.2.2.72.1.15 | Columnpm10010mptAlmClientLaneApdPowerSupplyPortn | read-only | current | Client Network Lane APD Power Supply :This OID indicates an APD Power supply failure on the Client Trscv Network Lane <Help> Alarm indicating an APD Power supp… |
| 1.3.6.1.4.1.20044.60.2.2.2.72.1.16 | Columnpm10010mptAlmClientLaneWavelengthUnlockedPortn | read-only | current | Client Network Lane Wavelength Unlock :This OID indicates a Wavelength unlock on the Client Trscv Network Lane <Help> Alarm indicating a Wavelength unlock on t… |
| 1.3.6.1.4.1.20044.60.2.2.2.72.1.17 | Columnpm10010mptAlmClientLaneTecFaultPortn | read-only | current | Client Network Lane TEC Fault :This OID indicates a TEC Fault on the Client Trscv Network Lane <Help> Alarm indicating a TEC Fault on the Client Trscv Network … |
| 1.3.6.1.4.1.20044.60.2.2.2.88 | Tablepm10010mptAlmclientHostLaneFaultTable | not-accessible | current | List of pm10010mptAlmclientHostLaneFault Article |
| 1.3.6.1.4.1.20044.60.2.2.2.88.1 | Rowpm10010mptAlmclientHostLaneFaultEntry | not-accessible | current | Row definition for the pm10010mptAlmclientHostLaneFault table |
| 1.3.6.1.4.1.20044.60.2.2.2.88.1.1 | Columnpm10010mptAlmclientHostLaneFaultIndex | read-only | current | Index definition for the pm10010mptAlmclientHostLaneFault table |
| 1.3.6.1.4.1.20044.60.2.2.2.88.1.2 | Columnpm10010mptAlmClientLossOfSyncPortn | read-only | current | Client Frame Alignment Loss :This OID indicates the module is not aligned with the incoming Client signal <Help> Alarm indicating the module is not aligned wit… |
| 1.3.6.1.4.1.20044.60.2.2.2.88.1.3 | Columnpm10010mptAlmClientInputLossOfSigPortn | read-only | current | Client Input Loss Of Signal :This OID indicates a Loss of Signal is detected on the Client Trscv <Help> Alarm indicating a Loss of Signal is detected on the Cl… |
| 1.3.6.1.4.1.20044.60.2.2.2.88.1.4 | Columnpm10010mptAlmClientLanesMarkerUnlockPortn | read-only | current | Client Lanes Marker Unlock :This OID indicates the Client lanes marker alignment is not lock <Help> Alarm indicating the Client lanes marker alignment is not l… |
| 1.3.6.1.4.1.20044.60.2.2.2.88.1.5 | Columnpm10010mptAlmClientLanes6466UnlockPortn | read-only | current | Client Lanes 64/66b Unlock :This OID indicates the Client 64/66b decoder is not lock <Help> Alarm indicating the Client 64/66b decoder is not lock <Condtype> C… |
| 1.3.6.1.4.1.20044.60.2.2.2.88.1.6 | Columnpm10010mptAlmClientLanesNotAlignedPortn | read-only | current | Client Lanes Not Aligned :This OID indicates the Client lanes are not aligned <Help> Alarm indicating the Client lanes are not aligned <Condtype> CLIENT_LANES_… |
| 1.3.6.1.4.1.20044.60.2.2.2.88.1.7 | Columnpm10010mptAlmClientCsfDetectedPortn | read-only | current | Client Signal Fail Detected :This OID indicates that a CSF has been detected on client port in the downstream direction <Help> This alarm indicates if a Client… |
| 1.3.6.1.4.1.20044.60.2.2.2.88.1.10 | Columnpm10010mptAlmClientTxHostLolPortn | read-only | current | Client Host Lane Tx Loss Of Lock :This OID indicates a Tx Loss of Lock on the Client Trscv Host Lane <Help> Alarm indicating a Tx Loss of Lock on the Client Tr… |
| 1.3.6.1.4.1.20044.60.2.2.2.88.1.11 | Columnpm10010mptAlmClientLaneTxFifoErrorPortn | read-only | current | Client Host Lane Tx FIFO Error :This OID indicates a Tx FIFO Error on the Client Trscv Host Lane <Help> Alarm indicating a Tx FIFO Error on the Client Trscv Ho… |
| 1.3.6.1.4.1.20044.60.2.2.2.88.1.12 | Columnpm10010mptAlmLfDetectedPortn | read-only | current | Local Fault Signal Detected :This OID indicates a Local Fault Signal is detected on the client input port<Help> This alarm indicates a Local Fault Signal is de… |
| 1.3.6.1.4.1.20044.60.2.2.2.88.1.13 | Columnpm10010mptAlmRfDetectedPortn | read-only | current | Remote Fault Signal Detected :This OID indicates a Remote Fault Signal is detected on the client input port<Help> This alarm indicates a Remote Fault Signal is… |
| 1.3.6.1.4.1.20044.60.2.2.2.216 | Tablepm10010mptAlmclientSfpAlmDdmTable | not-accessible | current | List of pm10010mptAlmclientSfpAlmDdm Article |
| 1.3.6.1.4.1.20044.60.2.2.2.216.1 | Rowpm10010mptAlmclientSfpAlmDdmEntry | not-accessible | current | Row definition for the pm10010mptAlmclientSfpAlmDdm table |
| 1.3.6.1.4.1.20044.60.2.2.2.216.1.1 | Columnpm10010mptAlmclientSfpAlmDdmIndex | read-only | current | Index definition for the pm10010mptAlmclientSfpAlmDdm table |
| 1.3.6.1.4.1.20044.60.2.2.2.216.1.2 | Columnpm10010mptAlmTxPwrLowAlaPortn | read-only | current | Client Trscv Tx Power Low :This OID indicates that the Trscv output power of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm in… |
| 1.3.6.1.4.1.20044.60.2.2.2.216.1.3 | Columnpm10010mptAlmTxPwrHighAlaPortn | read-only | current | Client Trscv Tx Power High :This OID indicates that the Trscv output power of port is higher than the threshold value written in the Trscv EEPROM <Help> Alarm … |
| 1.3.6.1.4.1.20044.60.2.2.2.216.1.4 | Columnpm10010mptAlmTxBiasLowAlaPortn | read-only | current | Client Trscv Bias Low :This OID indicates that the Trscv laser bias current of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm … |
| 1.3.6.1.4.1.20044.60.2.2.2.216.1.5 | Columnpm10010mptAlmTxBiasHighAlaPortn | read-only | current | Client Trscv Bias High :This OID indicates that the Trscv laser bias current of port is higher than the threshold value written in the Trscv EEPROM <Help> Alar… |
| 1.3.6.1.4.1.20044.60.2.2.2.216.1.6 | Columnpm10010mptAlmVccLowAlaPortn | read-only | current | Client Trscv Power Supply Low :This OID indicates that the Trscv power supply of port is lower than the threshold value written in the Trscv EEPROM <Help> Alar… |
| 1.3.6.1.4.1.20044.60.2.2.2.216.1.7 | Columnpm10010mptAlmVccHighAlaPortn | read-only | current | Client Trscv Power Supply High :This OID indicates that the Trscv power supply of port is higher than the threshold value written in the Trscv EEPROM <Help> Al… |
| 1.3.6.1.4.1.20044.60.2.2.2.216.1.8 | Columnpm10010mptAlmTempLowAlaPortn | read-only | current | Client Trscv Temp Low :This OID indicates that the Trscv temperature of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicat… |
| 1.3.6.1.4.1.20044.60.2.2.2.216.1.9 | Columnpm10010mptAlmTempHighAlaPortn | read-only | current | Client Trscv Temp High :This OID indicates that the Trscv temperature of port is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indic… |
| 1.3.6.1.4.1.20044.60.2.2.2.216.1.16 | Columnpm10010mptAlmRxPwrLowAlaPortn | read-only | current | Client Trscv Rx Power Low :This OID indicates that the Trscv input power of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm ind… |
| 1.3.6.1.4.1.20044.60.2.2.2.216.1.17 | Columnpm10010mptAlmRxPwrHighAlaPortn | read-only | current | Client Trscv Rx Power High :This OID indicates that the Trscv input power of port is higher than the threshold value written in the Trscv EEPROM <Help> Alarm i… |
| 1.3.6.1.4.1.20044.60.2.2.3 | Nodepm10010mptAlmClientCrit | |||
| 1.3.6.1.4.1.20044.60.2.2.3.8 | Tablepm10010mptAlmsynthAlmPortTable | not-accessible | current | List of pm10010mptAlmsynthAlmPort Article |
| 1.3.6.1.4.1.20044.60.2.2.3.8.1 | Rowpm10010mptAlmsynthAlmPortEntry | not-accessible | current | Row definition for the pm10010mptAlmsynthAlmPort table |
| 1.3.6.1.4.1.20044.60.2.2.3.8.1.1 | Columnpm10010mptAlmsynthAlmPortIndex | read-only | current | Index definition for the pm10010mptAlmsynthAlmPort table |
| 1.3.6.1.4.1.20044.60.2.2.3.8.1.2 | Columnpm10010mptAlmSfpAbsentPortn | read-only | current | Client Optical Module Absent :This OID indicates that the Transceiver is not present in the client port. <Help> This alarm indicates if the client transceiver … |
| 1.3.6.1.4.1.20044.60.2.2.3.8.1.3 | Columnpm10010mptAlmDdmAbsentPortn | read-only | current | DDM Supported On Client Trscv :This OID indicates that the Client transceiver supports the Digital Diagnostic Monitoring function <Help> This status indicates … |
| 1.3.6.1.4.1.20044.60.2.2.3.8.1.5 | Columnpm10010mptAlmHwFailAccPortn | read-only | current | Client HW Fail :This OID indicates a failure on client port, most probably caused by a HW issue. <Help> This alarm indicates a failure on client port, most pro… |
| 1.3.6.1.4.1.20044.60.2.2.3.8.1.6 | Columnpm10010mptAlmDwLsdPortn | read-only | current | Client Trscv Laser Shutdown :This OID indicates the Client transceiver laser is shutdown <Help> This status indicates if the client transceiver laser is shutdo… |
| 1.3.6.1.4.1.20044.60.2.2.3.8.1.7 | Columnpm10010mptAlmClientLocalOosPortn | read-only | current | Local Client Port In Service :This OID indicates that the local Client port is In Service (1) or Out of Service (2) <Help> This status indicates if the local c… |
| 1.3.6.1.4.1.20044.60.2.2.3.8.1.8 | Columnpm10010mptAlmClientRemoteOosPortn | read-only | current | Remote Client Port In Service :This OID indicates that the remote Client port is In Service (1) or Out of Service (2) <Help> This status indicates if the remot… |
| 1.3.6.1.4.1.20044.60.2.2.3.8.1.9 | Columnpm10010mptAlmDwCaisPortn | read-only | current | Client AIS Inserted :This OID indicates a CAIS has been inserted on the output client port. <Help> This status indicates if a Client Alarm Indication Signal is… |
| 1.3.6.1.4.1.20044.60.2.2.3.8.1.10 | Columnpm10010mptAlmSfpDdmWarningPortn | read-only | current | Warning On Client Trscv DDM :This OID indicates a warning is being received from the Client Transceiver DDM <Help> This alarm indicates if a DDM Warning has be… |
| 1.3.6.1.4.1.20044.60.2.2.3.8.1.11 | Columnpm10010mptAlmSfpDdmAlmPortn | read-only | current | Alarm On Client Trscv DDM :This OID indicates an alarm is being received from the Client Transceiver DDM <Help> This alarm indicates if a DDM Alarm has been de… |
| 1.3.6.1.4.1.20044.60.2.2.3.8.1.12 | Columnpm10010mptAlmIdleInsertedPortn | read-only | current | Idle Inserted :This OID indicates the client output stream is replaced by IDLE<Help> This alarm indicates the client output stream is replaced by IDLE <Condtyp… |
| 1.3.6.1.4.1.20044.60.2.2.3.8.1.13 | Columnpm10010mptAlmFailAccPortn | read-only | current | Client Access Fail :This OID indicates a failure on the Client port <Help> This alarm indicates a failure on the Client port <Condtype> FAIL_ACC_1 <Probcause> … |
| 1.3.6.1.4.1.20044.60.2.2.3.8.1.17 | Columnpm10010mptAlmUpCsfPortn | read-only | current | Client Signal Fail Inserted :This OID indicates a CSF has been inserted in the upstream client port. <Help> This status indicates if a Client Signal Fail is cu… |
| 1.3.6.1.4.1.20044.60.2.3 | Nodepm10010mptAlmLine | |||
| 1.3.6.1.4.1.20044.60.2.3.1 | Nodepm10010mptAlmLineNurg | |||
| 1.3.6.1.4.1.20044.60.2.3.1.104 | Tablepm10010mptAlmlineNetworkLaneAlarmWarning1Table | not-accessible | current | List of pm10010mptAlmlineNetworkLaneAlarmWarning1 Article |
| 1.3.6.1.4.1.20044.60.2.3.1.104.1 | Rowpm10010mptAlmlineNetworkLaneAlarmWarning1Entry | not-accessible | current | Row definition for the pm10010mptAlmlineNetworkLaneAlarmWarning1 table |
| 1.3.6.1.4.1.20044.60.2.3.1.104.1.1 | Columnpm10010mptAlmlineNetworkLaneAlarmWarning1Index | read-only | current | Index definition for the pm10010mptAlmlineNetworkLaneAlarmWarning1 table |
| 1.3.6.1.4.1.20044.60.2.3.1.104.1.2 | Columnpm10010mptAlmLineRxPowerLowAlarmPortn | read-only | current | Line Trscv Rx Power Low Alarm :This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicat… |
| 1.3.6.1.4.1.20044.60.2.3.1.104.1.3 | Columnpm10010mptAlmLineRxPowerLowWarningPortn | read-only | current | Line Trscv Rx Power Low Warning :This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM <Help> Warning ind… |
| 1.3.6.1.4.1.20044.60.2.3.1.104.1.4 | Columnpm10010mptAlmLineRxPowerHighWarningPortn | read-only | current | Line Trscv Rx Power High Warning :This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM <Help> Warning i… |
| 1.3.6.1.4.1.20044.60.2.3.1.104.1.5 | Columnpm10010mptAlmLineRxPowerHighAlarmPortn | read-only | current | Line Trscv Rx Power High Alarm :This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indic… |
| 1.3.6.1.4.1.20044.60.2.3.1.104.1.6 | Columnpm10010mptAlmLineLaserTempLowAlarmPortn | read-only | current | Line Trscv Tx Laser Temp Low Alarm :This OID indicates that the Trscv Tx Laser Temperature is lower than the threshold value written in the Trscv EEPROM <Help>… |
| 1.3.6.1.4.1.20044.60.2.3.1.104.1.7 | Columnpm10010mptAlmLineLaserTempLowWarningPortn | read-only | current | Line Trscv Tx Laser Temp Low Warning :This OID indicates that the Trscv Tx Laser Temperature is lower than the threshold value written in the Trscv EEPROM <Hel… |
| 1.3.6.1.4.1.20044.60.2.3.1.104.1.8 | Columnpm10010mptAlmLineLaserTempHighWarningPortn | read-only | current | Line Trscv Tx Laser Temp High Warning :This OID indicates that the Trscv Tx Laser Temperature is higher than the threshold value written in the Trscv EEPROM <H… |
| 1.3.6.1.4.1.20044.60.2.3.1.104.1.9 | Columnpm10010mptAlmLineLaserTempHighAlarmPortn | read-only | current | Line Trscv Tx Laser Temp High Alarm :This OID indicates that the Trscv Tx Laser Temperature is higher than the threshold value written in the Trscv EEPROM <Hel… |
| 1.3.6.1.4.1.20044.60.2.3.1.104.1.10 | Columnpm10010mptAlmLineTxPowerLowAlarmPortn | read-only | current | Line Trscv Tx Power Low Alarm :This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indica… |
| 1.3.6.1.4.1.20044.60.2.3.1.104.1.11 | Columnpm10010mptAlmLineTxPowerLowWarningPortn | read-only | current | Line Trscv Tx Power Low Warning :This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM <Help> Warning in… |
| 1.3.6.1.4.1.20044.60.2.3.1.104.1.12 | Columnpm10010mptAlmLineTxPowerHighWarningPortn | read-only | current | Line Trscv Tx Power High Warning :This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM <Help> Warning … |
| 1.3.6.1.4.1.20044.60.2.3.1.104.1.13 | Columnpm10010mptAlmLineTxPowerHighAlarmPortn | read-only | current | Line Trscv Tx Power High Alarm :This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indi… |
| 1.3.6.1.4.1.20044.60.2.3.1.104.1.14 | Columnpm10010mptAlmLineBiasLowAlarmPortn | read-only | current | Line Trscv Tx Bias Low Alarm :This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Alarm i… |
| 1.3.6.1.4.1.20044.60.2.3.1.104.1.15 | Columnpm10010mptAlmLineBiasLowWarningPortn | read-only | current | Line Trscv Tx Bias Low Warning :This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Warni… |
| 1.3.6.1.4.1.20044.60.2.3.1.104.1.16 | Columnpm10010mptAlmLineBiasHighWarningPortn | read-only | current | Line Trscv Tx Bias High Warning :This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> War… |
| 1.3.6.1.4.1.20044.60.2.3.1.104.1.17 | Columnpm10010mptAlmLineBiasHighAlarmPortn | read-only | current | Line Trscv Tx Bias High Alarm :This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Alarm… |
| 1.3.6.1.4.1.20044.60.2.3.1.120 | Tablepm10010mptAlmlineNetworkLaneAlarmWarning2Table | not-accessible | current | List of pm10010mptAlmlineNetworkLaneAlarmWarning2 Article |
| 1.3.6.1.4.1.20044.60.2.3.1.120.1 | Rowpm10010mptAlmlineNetworkLaneAlarmWarning2Entry | not-accessible | current | Row definition for the pm10010mptAlmlineNetworkLaneAlarmWarning2 table |
| 1.3.6.1.4.1.20044.60.2.3.1.120.1.1 | Columnpm10010mptAlmlineNetworkLaneAlarmWarning2Index | read-only | current | Index definition for the pm10010mptAlmlineNetworkLaneAlarmWarning2 table |
| 1.3.6.1.4.1.20044.60.2.3.1.120.1.2 | Columnpm10010mptAlmTxModulatorBiasLowAlarmPortn | read-only | current | Line Trscv Tx Modulator Bias Low Alarm :This OID indicates that the Trscv Tx modulator bias current is lower than the threshold value written in the Trscv EEPR… |
| 1.3.6.1.4.1.20044.60.2.3.1.120.1.3 | Columnpm10010mptAlmTxModulatorBiasLowWarningPortn | read-only | current | Line Trscv Tx Modulator Bias Low Warning :This OID indicates that the Trscv Tx modulator bias current is lower than the threshold value written in the Trscv EE… |
| 1.3.6.1.4.1.20044.60.2.3.1.120.1.4 | Columnpm10010mptAlmTxModulatorBiasHighWarningPortn | read-only | current | Line Trscv Tx Modulator Bias High Warning :This OID indicates that the Trscv Tx modulator bias current is higher than the threshold value written in the Trscv … |
| 1.3.6.1.4.1.20044.60.2.3.1.120.1.5 | Columnpm10010mptAlmTxModulatorBiasHighAlarmPortn | read-only | current | Line Trscv Tx Modulator Bias High Alarm :This OID indicates that the Trscv Tx modulator bias current is higher than the threshold value written in the Trscv EE… |
| 1.3.6.1.4.1.20044.60.2.3.1.120.1.6 | Columnpm10010mptAlmRxLaserTempLowAlarmPortn | read-only | current | Line Trscv Rx Laser Temp Low Alarm :This OID indicates that the Trscv Rx Laser Temperature is lower than the threshold value written in the Trscv EEPROM <Help>… |
| 1.3.6.1.4.1.20044.60.2.3.1.120.1.7 | Columnpm10010mptAlmRxLaserTempLowWarningPortn | read-only | current | Line Trscv Rx Laser Temp Low Warning :This OID indicates that the Trscv Rx Laser Temperature is lower than the threshold value written in the Trscv EEPROM <Hel… |
| 1.3.6.1.4.1.20044.60.2.3.1.120.1.8 | Columnpm10010mptAlmRxLaserTempHighWarningPortn | read-only | current | Line Trscv Rx Laser Temp High Warning :This OID indicates that the Trscv Rx Laser Temperature is higher than the threshold value written in the Trscv EEPROM <H… |
| 1.3.6.1.4.1.20044.60.2.3.1.120.1.9 | Columnpm10010mptAlmRxLaserTempHighAlarmPortn | read-only | current | Line Trscv Rx Laser Temp High Alarm :This OID indicates that the Trscv Rx Laser Temperature is higher than the threshold value written in the Trscv EEPROM <Hel… |
| 1.3.6.1.4.1.20044.60.2.3.1.120.1.10 | Columnpm10010mptAlmRxLaserOutputLowAlarmPortn | read-only | current | Line Trscv Rx Output Power Low Alarm :This OID indicates that the Trscv Rx output power is lower than the threshold value written in the Trscv EEPROM <Help> Al… |
| 1.3.6.1.4.1.20044.60.2.3.1.120.1.11 | Columnpm10010mptAlmRxLaserOutputLowWarningPortn | read-only | current | Line Trscv Rx Output Power Low Warning :This OID indicates that the Trscv Rx output power is lower than the threshold value written in the Trscv EEPROM <Help> … |
| 1.3.6.1.4.1.20044.60.2.3.1.120.1.12 | Columnpm10010mptAlmRxLaserOutputHighWarningPortn | read-only | current | Line Trscv Rx Output Power High Warning :This OID indicates that the Trscv Rx output power is higher than the threshold value written in the Trscv EEPROM <Help… |
| 1.3.6.1.4.1.20044.60.2.3.1.120.1.13 | Columnpm10010mptAlmRxLaserOutputHighAlarmPortn | read-only | current | Line Trscv Rx Output Power High Alarm :This OID indicates that the Trscv Rx output power is higher than the threshold value written in the Trscv EEPROM <Help> … |
| 1.3.6.1.4.1.20044.60.2.3.1.120.1.14 | Columnpm10010mptAlmRxLaserBiasLowAlarmPortn | read-only | current | Line Trscv Rx Bias Low Alarm :This OID indicates that the Trscv Rx laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Alar… |
| 1.3.6.1.4.1.20044.60.2.3.1.120.1.15 | Columnpm10010mptAlmRxLaserBiasLowWarningPortn | read-only | current | Line Trscv Rx Bias Low Warning :This OID indicates that the Trscv Rx laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Wa… |
| 1.3.6.1.4.1.20044.60.2.3.1.120.1.16 | Columnpm10010mptAlmRxLaserBiasHighWarningPortn | read-only | current | Line Trscv Rx Bias High Warning :This OID indicates that the Trscv Rx laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> … |
| 1.3.6.1.4.1.20044.60.2.3.1.120.1.17 | Columnpm10010mptAlmRxLaserBiasHighAlarmPortn | read-only | current | Line Trscv Rx Bias High Alarm :This OID indicates that the Trscv Rx laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Al… |
| 1.3.6.1.4.1.20044.60.2.3.2 | Nodepm10010mptAlmLineUrg | |||
| 1.3.6.1.4.1.20044.60.2.3.2.136 | Tablepm10010mptAlmlineNetworkLaneFaultTable | not-accessible | current | List of pm10010mptAlmlineNetworkLaneFault Article |
| 1.3.6.1.4.1.20044.60.2.3.2.136.1 | Rowpm10010mptAlmlineNetworkLaneFaultEntry | not-accessible | current | Row definition for the pm10010mptAlmlineNetworkLaneFault table |
| 1.3.6.1.4.1.20044.60.2.3.2.136.1.1 | Columnpm10010mptAlmlineNetworkLaneFaultIndex | read-only | current | Index definition for the pm10010mptAlmlineNetworkLaneFault table |
| 1.3.6.1.4.1.20044.60.2.3.2.136.1.3 | Columnpm10010mptAlmLineLaneRxTecFaultPortn | read-only | current | Line Network Lane Rx TEC Fault :This OID indicates a Rx TEC Fault on the Line Trscv Network Lane <Help> Alarm indicating a Rx TEC Fault on the Line Trscv Netwo… |
| 1.3.6.1.4.1.20044.60.2.3.2.136.1.4 | Columnpm10010mptAlmLineLaneRxFifoErrorPortn | read-only | current | Line Network Lane Rx FIFO Error :This OID indicates a Rx FIFO Error on the Line Trscv Network Lane <Help> Alarm indicating a Rx FIFO Error on the Line Trscv Ne… |
| 1.3.6.1.4.1.20044.60.2.3.2.136.1.5 | Columnpm10010mptAlmLineLaneRxLolPortn | read-only | current | Line Network Lane Rx Loss Of Lock :This OID indicates a Rx Loss of Lock on the Line Trscv Network Lane <Help> Alarm indicating a Rx Loss of Lock on the Line Tr… |
| 1.3.6.1.4.1.20044.60.2.3.2.136.1.6 | Columnpm10010mptAlmLineLaneRxLosPortn | read-only | current | Line Network Lane Rx Loss Of Signal :This OID indicates a Rx Loss of Signal on the Line Trscv Network Lane <Help> Alarm indicating a Rx Loss of Signal on the L… |
| 1.3.6.1.4.1.20044.60.2.3.2.136.1.8 | Columnpm10010mptAlmLineLaneTxLolPortn | read-only | current | Line Network Lane Tx Loss Of Lock :This OID indicates a Tx Loss of Lock on the Line Trscv Network Lane <Help> Alarm indicating a Tx Loss of Lock on the Line Tr… |
| 1.3.6.1.4.1.20044.60.2.3.2.136.1.9 | Columnpm10010mptAlmLineLaneTxLosfPortn | read-only | current | Line Network Lane Tx Loss Of Signal Functionality :This OID indicates a Tx Loss of Signal Functionality on the Line Trscv Network Lane <Help> Alarm indicating … |
| 1.3.6.1.4.1.20044.60.2.3.2.136.1.15 | Columnpm10010mptAlmLineLaneApdPowerSupplyPortn | read-only | current | Line Network Lane APD Power Supply :This OID indicates an APD Power supply failure on the Line Trscv Network Lane <Help> Alarm indicating an APD Power supply f… |
| 1.3.6.1.4.1.20044.60.2.3.2.136.1.16 | Columnpm10010mptAlmLineLaneWavelengthUnlockedPortn | read-only | current | Line Network Lane Wavelength Unlock :This OID indicates a Wavelength unlock on the Line Trscv Network Lane <Help> Alarm indicating a Wavelength unlock on the L… |
| 1.3.6.1.4.1.20044.60.2.3.2.136.1.17 | Columnpm10010mptAlmLineLaneTecFaultPortn | read-only | current | Line Network Lane TEC Fault :This OID indicates a Tx TEC Fault on the Line Trscv Network Lane <Help> Alarm indicating a Tx TEC Fault on the Line Trscv Network … |
| 1.3.6.1.4.1.20044.60.2.3.2.152 | Tablepm10010mptAlmlineHostLaneFaultTable | not-accessible | current | List of pm10010mptAlmlineHostLaneFault Article |
| 1.3.6.1.4.1.20044.60.2.3.2.152.1 | Rowpm10010mptAlmlineHostLaneFaultEntry | not-accessible | current | Row definition for the pm10010mptAlmlineHostLaneFault table |
| 1.3.6.1.4.1.20044.60.2.3.2.152.1.1 | Columnpm10010mptAlmlineHostLaneFaultIndex | read-only | current | Index definition for the pm10010mptAlmlineHostLaneFault table |
| 1.3.6.1.4.1.20044.60.2.3.2.152.1.2 | Columnpm10010mptAlmLineInputLossOfSignalPortn | read-only | current | Line Input Loss Of Signal :This OID indicates a Loss of Signal is detected on the Line Trscv <Help> Alarm indicating a Loss of Signal is detected on the Line T… |
| 1.3.6.1.4.1.20044.60.2.3.2.152.1.3 | Columnpm10010mptAlmLineLossOfFramePortn | read-only | current | Line Loss Of Frame :This OID indicates the module is not aligned with the incoming Line signal <Help> Alarm indicating the module is not aligned with the incom… |
| 1.3.6.1.4.1.20044.60.2.3.2.152.1.4 | Columnpm10010mptAlmLineSmBdiInsertedPortn | read-only | current | Line SM BDI Inserted :This OID indicates a SM Backward Defect Indication is inserted on the outgoing Line signal <Help> Status indicating a SM Backward Defect … |
| 1.3.6.1.4.1.20044.60.2.3.2.152.1.5 | Columnpm10010mptAlmLineSmBdiDetectedPortn | read-only | current | Line SM BDI Detected :This OID indicates a SM Backward Defect Indication is detected on the incoming Line signal <Help> Alarm indicating a SM Backward Defect I… |
| 1.3.6.1.4.1.20044.60.2.3.2.152.1.6 | Columnpm10010mptAlmLineSmIaeInsertedPortn | read-only | current | Line SM IAE Inserted :This OID indicates a SM Incoming Alignment Error is inserted on the outgoing Line signal <Help> Status indicating a SM Incoming Alignment… |
| 1.3.6.1.4.1.20044.60.2.3.2.152.1.7 | Columnpm10010mptAlmLineSmIaeDetectedPortn | read-only | current | Line SM IAE Detected :This OID indicates a SM Incoming Alignment Error is detected on the incoming Line signal <Help> Alarm indicating a SM Incoming Alignment … |
| 1.3.6.1.4.1.20044.60.2.3.2.152.1.10 | Columnpm10010mptAlmLineTxHostLolPortn | read-only | current | Line Host Lane Tx Loss Of Lock :This OID indicates a Tx Loss of Lock on the Line Trscv Host Lane <Help> Alarm indicating a Tx Loss of Lock on the Line Trscv Ho… |
| 1.3.6.1.4.1.20044.60.2.3.2.152.1.11 | Columnpm10010mptAlmLineLaneTxFifoErrorPortn | read-only | current | Line Host Lane Tx FIFO Error :This OID indicates a Tx FIFO Error on the Line Trscv Host Lane <Help> Alarm indicating a Tx FIFO Error on the Line Trscv Host Lan… |
| 1.3.6.1.4.1.20044.60.2.3.2.152.1.16 | Columnpm10010mptAlmLinePowerDegradePortn | read-only | current | 3V3 Power Degrade :This OID indicates the 3V3 power converter was in failure<Help> This alarm indicates the 3V3 power converter was in failure <Condtype> LINE_… |
| 1.3.6.1.4.1.20044.60.2.3.2.152.1.17 | Columnpm10010mptAlmLineTrxOverTempPortn | read-only | current | Temperature Critical Level :This OID indicates the module temperature is too high triggering the power down protection mechanism <Help> This alarm indicates th… |
| 1.3.6.1.4.1.20044.60.2.3.2.168 | Tablepm10010mptAlmlineNetworkLaneRxOtnTable | not-accessible | current | List of pm10010mptAlmlineNetworkLaneRxOtn Article |
| 1.3.6.1.4.1.20044.60.2.3.2.168.1 | Rowpm10010mptAlmlineNetworkLaneRxOtnEntry | not-accessible | current | Row definition for the pm10010mptAlmlineNetworkLaneRxOtn table |
| 1.3.6.1.4.1.20044.60.2.3.2.168.1.1 | Columnpm10010mptAlmlineNetworkLaneRxOtnIndex | read-only | current | Index definition for the pm10010mptAlmlineNetworkLaneRxOtn table |
| 1.3.6.1.4.1.20044.60.2.3.2.168.1.10 | Columnpm10010mptAlmLineRxOtnOduAisPortn | read-only | current | Line Network Rx ODU AIS :This OID indicates an ODU This OID Indication Signal is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating… |
| 1.3.6.1.4.1.20044.60.2.3.2.168.1.11 | Columnpm10010mptAlmLineRxOtnOtuAisPortn | read-only | current | Line Network Rx OTU AIS :This OID indicates an OTU This OID Indication Signal is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating… |
| 1.3.6.1.4.1.20044.60.2.3.2.168.1.12 | Columnpm10010mptAlmLineRxSmBdiPortn | read-only | current | Line Network Rx SM BDI :This OID indicates an SM Backward Defect Indication is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating a… |
| 1.3.6.1.4.1.20044.60.2.3.2.168.1.13 | Columnpm10010mptAlmLineRxOtnIaePortn | read-only | current | Line Network Rx IAE :This OID indicates an Incoming Alignment Error is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating an Incomi… |
| 1.3.6.1.4.1.20044.60.2.3.2.168.1.14 | Columnpm10010mptAlmLineRxOtnOomPortn | read-only | current | Line Network Rx OOM :This OID indicates an Out of Multiframe is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating an Out of Multif… |
| 1.3.6.1.4.1.20044.60.2.3.2.168.1.15 | Columnpm10010mptAlmLineRxOtnLomPortn | read-only | current | Line Network Rx LOM :This OID indicates a Loss of Multiframe is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating a Loss of Multif… |
| 1.3.6.1.4.1.20044.60.2.3.2.168.1.16 | Columnpm10010mptAlmLineRxOtnOofPortn | read-only | current | Line Network Rx OOF :This OID indicates an Out of Frame is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating an Out of Frame is de… |
| 1.3.6.1.4.1.20044.60.2.3.2.168.1.17 | Columnpm10010mptAlmLineRxOtnLofPortn | read-only | current | Line Network Rx LOF :This OID indicates a Loss of Frame is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating a Loss of Frame is de… |
| 1.3.6.1.4.1.20044.60.2.3.2.184 | Tablepm10010mptAlmlineHostLaneTxOtnTable | not-accessible | current | List of pm10010mptAlmlineHostLaneTxOtn Article |
| 1.3.6.1.4.1.20044.60.2.3.2.184.1 | Rowpm10010mptAlmlineHostLaneTxOtnEntry | not-accessible | current | Row definition for the pm10010mptAlmlineHostLaneTxOtn table |
| 1.3.6.1.4.1.20044.60.2.3.2.184.1.1 | Columnpm10010mptAlmlineHostLaneTxOtnIndex | read-only | current | Index definition for the pm10010mptAlmlineHostLaneTxOtn table |
| 1.3.6.1.4.1.20044.60.2.3.2.184.1.10 | Columnpm10010mptAlmLineTxOtnOduAisPortn | read-only | current | Line Host Tx ODU AIS :This OID indicates an ODU This OID Indication Signal is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating an OD… |
| 1.3.6.1.4.1.20044.60.2.3.2.184.1.11 | Columnpm10010mptAlmLineTxOtnOtuAisPortn | read-only | current | Line Host Tx OTU AIS :This OID indicates an OTU This OID Indication Signal is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating an OT… |
| 1.3.6.1.4.1.20044.60.2.3.2.184.1.12 | Columnpm10010mptAlmLineTxSmBdiPortn | read-only | current | Line Host Tx SM BDI :This OID indicates an SM Backward Defect Indication is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating an SM B… |
| 1.3.6.1.4.1.20044.60.2.3.2.184.1.13 | Columnpm10010mptAlmLineTxOtnIaePortn | read-only | current | Line Host Tx IAE :This OID indicates an Incoming Alignment Error is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating an Incoming Ali… |
| 1.3.6.1.4.1.20044.60.2.3.2.184.1.14 | Columnpm10010mptAlmLineTxOtnOomPortn | read-only | current | Line Host Tx OOM :This OID indicates an Out of Multiframe is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating an Out of Multiframe i… |
| 1.3.6.1.4.1.20044.60.2.3.2.184.1.15 | Columnpm10010mptAlmLineTxOtnLomPortn | read-only | current | Line Host Tx LOM :This OID indicates a Loss of Multiframe is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating a Loss of Multiframe i… |
| 1.3.6.1.4.1.20044.60.2.3.2.184.1.16 | Columnpm10010mptAlmLineTxOtnOofPortn | read-only | current | Line Host Tx OOF :This OID indicates an Out of Frame is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating an Out of Frame is detected… |
| 1.3.6.1.4.1.20044.60.2.3.2.184.1.17 | Columnpm10010mptAlmLineTxOtnLofPortn | read-only | current | Line Host Tx LOF :This OID indicates a Loss of Frame is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating a Loss of Frame is detected… |
| 1.3.6.1.4.1.20044.60.2.3.3 | Nodepm10010mptAlmLineCrit | |||
| 1.3.6.1.4.1.20044.60.2.3.3.24 | Tablepm10010mptAlmsynthAlmLineTable | not-accessible | current | List of pm10010mptAlmsynthAlmLine Article |
| 1.3.6.1.4.1.20044.60.2.3.3.24.1 | Rowpm10010mptAlmsynthAlmLineEntry | not-accessible | current | Row definition for the pm10010mptAlmsynthAlmLine table |
| 1.3.6.1.4.1.20044.60.2.3.3.24.1.1 | Columnpm10010mptAlmsynthAlmLineIndex | read-only | current | Index definition for the pm10010mptAlmsynthAlmLine table |
| 1.3.6.1.4.1.20044.60.2.3.3.24.1.2 | Columnpm10010mptAlmXfpAbsentPortn | read-only | current | Line Optical Module Absent :This OID indicates that the line optical interface is not present. <Help> This alarm indicates if the line transceiver is not plugg… |
| 1.3.6.1.4.1.20044.60.2.3.3.24.1.3 | Columnpm10010mptAlmXfpInitNotComplPortn | read-only | current | Line Optical Module Ready :This OID indicates that the optical interface is not operational. <Help> This status indicates if the line transceiver has been corr… |
| 1.3.6.1.4.1.20044.60.2.3.3.24.1.5 | Columnpm10010mptAlmLineHwFailPortn | read-only | current | Line Port HW Failure :This OID indicates a failure on line port, most probably caused by a HW issue <Help> This alarm indicates a failure on line port, most pr… |
| 1.3.6.1.4.1.20044.60.2.3.3.24.1.6 | Columnpm10010mptAlmXfpTxOffPortn | read-only | current | Line Trscv Laser Shutdown :This OID indicates the Line transceiver laser is shutdown <Help> This status indicates if the Line transceiver laser is shutdown <Co… |
| 1.3.6.1.4.1.20044.60.2.3.3.24.1.7 | Columnpm10010mptAlmLineLocalOosPortn | read-only | current | Line Port In Service :This OID indicates that the Line port is In Service (1) of Out or Service (2) <Help> This status indicates if the line port is in service… |
| 1.3.6.1.4.1.20044.60.2.3.3.24.1.9 | Columnpm10010mptAlmUpRdiInsPortn | read-only | current | MS-RDI/L-RDI Inserted On Line :This OID indicates an upstream MS-RDI/L-RDI has been inserted in the outgoing 10 Gb/s SDH/SONET signal. <Help> This status indic… |
| 1.3.6.1.4.1.20044.60.2.3.3.24.1.10 | Columnpm10010mptAlmLineDdmWarningPortn | read-only | current | Warning On Line Optical Module DDM :This OID indicates a warning is present coming out of Line transceiver DDM <Help> This alarm indicates if a DDM Warning has… |
| 1.3.6.1.4.1.20044.60.2.3.3.24.1.11 | Columnpm10010mptAlmLineDdmAlmPortn | read-only | current | Alarm On Line Optical Module DDM :This OID indicates an alarm is present coming out of Line transceiver DDM <Help> This alarm indicates if a DDM Alarm has been… |
| 1.3.6.1.4.1.20044.60.2.3.3.24.1.13 | Columnpm10010mptAlmLineFailPortn | read-only | current | Line Port Failure :This OID indicates a failure on the line port <Help> This alarm indicates a failure on the line port <Condtype> LINE_FAIL <Probcause> equipm… |
| 1.3.6.1.4.1.20044.60.2.3.3.24.1.17 | Columnpm10010mptAlmLineActivePortn | read-only | current | Line Active :This OID indicates whether the line is active or standby. <Help> This status indicates whether the line is active or standby. <Condtype> LINE_ACTI… |
| 1.3.6.1.4.1.20044.60.3 | Nodepm10010mptmeasures | |||
| 1.3.6.1.4.1.20044.60.3.1 | Nodepm10010mptMesrOther | |||
| 1.3.6.1.4.1.20044.60.3.1.0 | Scalarpm10010mptMesrsynth0 | read-only | deprecated | Not Used : |
| 1.3.6.1.4.1.20044.60.3.1.1 | Scalarpm10010mptMesrsynth1 | read-only | deprecated | Not Used : |
| 1.3.6.1.4.1.20044.60.3.1.7 | Scalarpm10010mptMesrpmIntervalNumber | read-only | current | PM Interval Counter : |
| 1.3.6.1.4.1.20044.60.3.1.180 | Scalarpm10010mptMesrlineNetTxLaserOutputPwrAverage | read-only | current | Average Line Trscv Tx Power :This OID gives the average Tx Laser transmit power value among the network lanes of the Line Transceiver, read in the DDM (Digital… |
| 1.3.6.1.4.1.20044.60.3.1.181 | Scalarpm10010mptMesrlineNetTxLaserTempAverage | read-only | current | Average Line Trscv Tx Laser Temperature :This OID gives the average Tx Laser Temperature value among the network lanes of the Line Transceiver, read from the D… |
| 1.3.6.1.4.1.20044.60.3.1.182 | Scalarpm10010mptMesrlineNetTxBiasCurrentAverage | read-only | current | Average Line Trscv Tx Laser Bias :This OID gives the average Tx Laser Bias value among the network lanes of the Line Transceiver, read from the DDM (Digital Di… |
| 1.3.6.1.4.1.20044.60.3.1.183 | Scalarpm10010mptMesrlineNetRxInputPwrAverage | read-only | current | Average Line Trscv Rx Power :This OID gives the average Receive power value among the network lanes of the Line Transceiver, read in the DDM (Digital Diagnosti… |
| 1.3.6.1.4.1.20044.60.3.1.184 | Scalarpm10010mptMesrlineResidualChromaticDispAverage | read-only | current | Average Residual Chromatic Dispersion :This OID gives the average Residual Chromatic Dispersion on the Line interface since the last measure reset <Help> This … |
| 1.3.6.1.4.1.20044.60.3.1.185 | Scalarpm10010mptMesrlineDiffGroupDelayAverage | read-only | current | Average Differential Group Delay :This OID gives the average Group Delay on the Line interface since the last measure reset <Help> This measure gives the avera… |
| 1.3.6.1.4.1.20044.60.3.1.186 | Scalarpm10010mptMesrlineQFactorAverage | read-only | current | Average Q Factor :This OID gives the average Q Factor on the Line interface since the last measure reset <Help> This measure gives the average Q Factor on the … |
| 1.3.6.1.4.1.20044.60.3.1.187 | Scalarpm10010mptMesrlineCarrierFreqOffsetAverage | read-only | current | Average Carrier Frequency Offset :This OID gives the average Carrier Frequency Offset on the Line interface since the last measure reset <Help> This measure gi… |
| 1.3.6.1.4.1.20044.60.3.1.188 | Scalarpm10010mptMesrlineOsnrAverage | read-only | current | Average OSNR :This OID gives the average OSNR on the Line interface since the last measure reset <Help> This measure gives the average OSNR on the Line interfa… |
| 1.3.6.1.4.1.20044.60.3.1.192 | Scalarpm10010mptMesrclientNetTxTempMin | read-only | current | Min Client Trscv Laser Temperature :This OID gives the minimum Laser temperature value among the network lanes of the Client Transceiver, read from the DDM (Di… |
| 1.3.6.1.4.1.20044.60.3.1.193 | Scalarpm10010mptMesrclientNetTxBiasMin | read-only | current | Min Client Trscv Laser Bias :This OID gives the minimum Laser bias value among the network lanes of the Client Transceiver, read from the DDM (Digital Diagnost… |
| 1.3.6.1.4.1.20044.60.3.1.194 | Scalarpm10010mptMesrclientNetTxPwrMin | read-only | current | Min Client Trscv Tx Power :This OID gives the minimum transmit power value among the network lanes of the Client Transceiver, read from the DDM (Digital Diagno… |
| 1.3.6.1.4.1.20044.60.3.1.195 | Scalarpm10010mptMesrclientNetRxPwrMin | read-only | current | Min Client Trscv Rx Power :This OID gives the minimum receive power value among the network lanes of the Client Transceiver, read in the DDM (Digital Diagnosti… |
| 1.3.6.1.4.1.20044.60.3.1.196 | Scalarpm10010mptMesrlineNetTxLaserOutputPwrMin | read-only | current | Min Line Trscv Tx Power :This OID gives the minimum Tx Laser transmit power value among the network lanes of the Line Transceiver, read in the DDM (Digital Dia… |
| 1.3.6.1.4.1.20044.60.3.1.197 | Scalarpm10010mptMesrlineNetTxLaserTempMin | read-only | current | Min Line Trscv Tx Laser Temperature :This OID gives the minimum Tx Laser Temperature value among the network lanes of the Line Transceiver, read from the DDM (… |
| 1.3.6.1.4.1.20044.60.3.1.198 | Scalarpm10010mptMesrlineNetTxBiasCurrentMin | read-only | current | Min Line Trscv Tx Laser Bias :This OID gives the minimum Tx Laser Bias value among the network lanes of the Line Transceiver, read from the DDM (Digital Diagno… |
| 1.3.6.1.4.1.20044.60.3.1.199 | Scalarpm10010mptMesrlineNetRxInputPwrMin | read-only | current | Min Line Trscv Rx Power :This OID gives the minimum Receive power value among the network lanes of the Line Transceiver, read in the DDM (Digital Diagnostic Mo… |
| 1.3.6.1.4.1.20044.60.3.1.200 | Scalarpm10010mptMesrlineResidualChromaticDispMin | read-only | current | Min Residual Chromatic Dispersion :This OID gives the minimum Residual Chromatic Dispersion on the Line interface since the last measure reset (Unit = ps/nm)<H… |
| 1.3.6.1.4.1.20044.60.3.1.201 | Scalarpm10010mptMesrlineDiffGroupDelayMin | read-only | current | Min Differential Group Delay :This OID gives the minimum Differential Group Delay on the Line interface since the last measure reset (Unit = ps)<Help> This mea… |
| 1.3.6.1.4.1.20044.60.3.1.202 | Scalarpm10010mptMesrlineQFactorMin | read-only | current | Min Q Factor :This OID gives the minimum Q Factor on the Line interface since the last measure reset (Unit = dB)<Help> This measure gives the minimum Q Factor … |
| 1.3.6.1.4.1.20044.60.3.1.203 | Scalarpm10010mptMesrlineCarrierFreqOffsetMin | read-only | current | Min Carrier Frequency Offset :This OID gives the minimum Carrier Frequency Offset on the Line interface since the last measure reset (Unit = Mhz)<Help> This me… |
| 1.3.6.1.4.1.20044.60.3.1.204 | Scalarpm10010mptMesrlineOsnrMin | read-only | current | Min OSNR :This OID gives the minimum OSNR on the Line interface since the last measure reset (OSNR = AV/10) (Unit = dB)<Help> This measure gives the minimum OS… |
| 1.3.6.1.4.1.20044.60.3.1.208 | Scalarpm10010mptMesrclientNetTxTempMax | read-only | current | Max Client Trscv Laser Temperature :This OID gives the maximum Laser temperature value among the network lanes of the Client Transceiver, read from the DDM (Di… |
| 1.3.6.1.4.1.20044.60.3.1.209 | Scalarpm10010mptMesrclientNetTxBiasMax | read-only | current | Max Client Trscv Laser Bias :This OID gives the maximum Laser bias value among the network lanes of the Client Transceiver, read from the DDM (Digital Diagnost… |
| 1.3.6.1.4.1.20044.60.3.1.210 | Scalarpm10010mptMesrclientNetTxPwrMax | read-only | current | Max Client Trscv Tx Power :This OID gives the maximum transmit power value among the network lanes of the Client Transceiver, read from the DDM (Digital Diagno… |
| 1.3.6.1.4.1.20044.60.3.1.211 | Scalarpm10010mptMesrclientNetRxPwrMax | read-only | current | Max Client Trscv Rx Power :This OID gives the maximum receive power value among the network lanes of the Client Transceiver, read in the DDM (Digital Diagnosti… |
| 1.3.6.1.4.1.20044.60.3.1.212 | Scalarpm10010mptMesrlineNetTxLaserOutputPwrMax | read-only | current | Max Line Trscv Tx Power :This OID gives the maximum Tx Laser transmit power value among the network lanes of the Line Transceiver, read in the DDM (Digital Dia… |
| 1.3.6.1.4.1.20044.60.3.1.213 | Scalarpm10010mptMesrlineNetTxLaserTempMax | read-only | current | Max Line Trscv Tx Laser Temperature :This OID gives the maximum Tx Laser Temperature value among the network lanes of the Line Transceiver, read from the DDM (… |
| 1.3.6.1.4.1.20044.60.3.1.214 | Scalarpm10010mptMesrlineNetTxBiasCurrentMax | read-only | current | Max Line Trscv Tx Laser Bias :This OID gives the maximum Tx Laser Bias value among the network lanes of the Line Transceiver, read from the DDM (Digital Diagno… |
| 1.3.6.1.4.1.20044.60.3.1.215 | Scalarpm10010mptMesrlineNetRxInputPwrMax | read-only | current | Max Line Trscv Rx Power :This OID gives the maximum Receive power value among the network lanes of the Line Transceiver, read in the DDM (Digital Diagnostic Mo… |
| 1.3.6.1.4.1.20044.60.3.1.216 | Scalarpm10010mptMesrlineResidualChromaticDispMax | read-only | current | Max Residual Chromatic Dispersion :This OID gives the maximum Residual Chromatic Dispersion on the Line interface since the last measure reset (Unit = ps/nm)<H… |
| 1.3.6.1.4.1.20044.60.3.1.217 | Scalarpm10010mptMesrlineDiffGroupDelayMax | read-only | current | Max Differential Group Delay :This OID gives the maximum Differential Group Delay on the Line interface since the last measure reset (Unit = ps)<Help> This mea… |
| 1.3.6.1.4.1.20044.60.3.1.218 | Scalarpm10010mptMesrlineQFactorMax | read-only | current | Max Q Factor :This OID gives the maximum Q Factor on the Line interface since the last measure reset (Unit = dB)<Help> This measure gives the maximum Q Factor … |
| 1.3.6.1.4.1.20044.60.3.1.219 | Scalarpm10010mptMesrlineCarrierFreqOffsetMax | read-only | current | Max Carrier Frequency Offset :This OID gives the maximum Carrier Frequency Offset on the Line interface since the last measure reset (Unit = Mhz)<Help> This me… |
| 1.3.6.1.4.1.20044.60.3.1.220 | Scalarpm10010mptMesrlineOsnrMax | read-only | current | Max OSNR :This OID gives the maximum OSNR on the Line interface since the last measure reset (OSNR = AV/10) (Unit = dB)<Help> This measure gives the maximum OS… |
| 1.3.6.1.4.1.20044.60.3.2 | Nodepm10010mptMesrClient | |||
| 1.3.6.1.4.1.20044.60.3.2.8 | Scalarpm10010mptMesrclientCfpTemp | read-only | current | Client Trscv Temperature :This OID gives the temperature value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/2… |
| 1.3.6.1.4.1.20044.60.3.2.9 | Scalarpm10010mptMesrclientCfp3v3Voltage | read-only | current | Client Trscv Voltage :This OID gives the 3V3 voltage value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Voltage = AV/1000) (Un… |
| 1.3.6.1.4.1.20044.60.3.2.10 | Scalarpm10010mptMesrclientSoaBiasCurrent | read-only | current | Client Trscv SOA Bias :This OID gives the SOA bias value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/500) (Unit = m… |
| 1.3.6.1.4.1.20044.60.3.2.16 | Tablepm10010mptMesrclientNetTxTempTable | not-accessible | current | List of pm10010mptMesrclientNetTxTemp Article |
| 1.3.6.1.4.1.20044.60.3.2.16.1 | Rowpm10010mptMesrclientNetTxTempEntry | not-accessible | current | Row definition for the pm10010mptMesrclientNetTxTemp table |
| 1.3.6.1.4.1.20044.60.3.2.16.1.1 | Columnpm10010mptMesrclientNetTxTempIndex | read-only | current | Index definition for the pm10010mptMesrclientNetTxTemp table |
| 1.3.6.1.4.1.20044.60.3.2.16.1.2 | Columnpm10010mptMesrclientNetTxTempPortn | read-only | current | Client Trscv Temperature :This OID gives the Laser temperature value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature … |
| 1.3.6.1.4.1.20044.60.3.2.32 | Tablepm10010mptMesrclientNetTxBiasTable | not-accessible | current | List of pm10010mptMesrclientNetTxBias Article |
| 1.3.6.1.4.1.20044.60.3.2.32.1 | Rowpm10010mptMesrclientNetTxBiasEntry | not-accessible | current | Row definition for the pm10010mptMesrclientNetTxBias table |
| 1.3.6.1.4.1.20044.60.3.2.32.1.1 | Columnpm10010mptMesrclientNetTxBiasIndex | read-only | current | Index definition for the pm10010mptMesrclientNetTxBias table |
| 1.3.6.1.4.1.20044.60.3.2.32.1.2 | Columnpm10010mptMesrclientNetTxBiasPortn | read-only | current | Client Trscv Laser Bias :This OID gives the Laser bias value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/500) (Unit… |
| 1.3.6.1.4.1.20044.60.3.2.48 | Tablepm10010mptMesrclientNetTxPwrTable | not-accessible | current | List of pm10010mptMesrclientNetTxPwr Article |
| 1.3.6.1.4.1.20044.60.3.2.48.1 | Rowpm10010mptMesrclientNetTxPwrEntry | not-accessible | current | Row definition for the pm10010mptMesrclientNetTxPwr table |
| 1.3.6.1.4.1.20044.60.3.2.48.1.1 | Columnpm10010mptMesrclientNetTxPwrIndex | read-only | current | Index definition for the pm10010mptMesrclientNetTxPwr table |
| 1.3.6.1.4.1.20044.60.3.2.48.1.2 | Columnpm10010mptMesrclientNetTxPwrPortn | read-only | current | Client Trscv Tx Power :This OID gives the transmit power value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)… |
| 1.3.6.1.4.1.20044.60.3.2.64 | Tablepm10010mptMesrclientNetRxPwrTable | not-accessible | current | List of pm10010mptMesrclientNetRxPwr Article |
| 1.3.6.1.4.1.20044.60.3.2.64.1 | Rowpm10010mptMesrclientNetRxPwrEntry | not-accessible | current | Row definition for the pm10010mptMesrclientNetRxPwr table |
| 1.3.6.1.4.1.20044.60.3.2.64.1.1 | Columnpm10010mptMesrclientNetRxPwrIndex | read-only | current | Index definition for the pm10010mptMesrclientNetRxPwr table |
| 1.3.6.1.4.1.20044.60.3.2.64.1.2 | Columnpm10010mptMesrclientNetRxPwrPortn | read-only | current | Client Trscv Rx Power :This OID gives the receive power value of the Client Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40… |
| 1.3.6.1.4.1.20044.60.3.3 | Nodepm10010mptMesrLine | |||
| 1.3.6.1.4.1.20044.60.3.3.12 | Scalarpm10010mptMesrlineMsaTemp | read-only | current | Line Trscv Temperature :This OID gives the temperature value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/256) … |
| 1.3.6.1.4.1.20044.60.3.3.13 | Scalarpm10010mptMesrlineMsa3v3Voltage | read-only | current | Line Trscv Voltage :This OID gives the 3V3 voltage value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Voltage = AV/1000) (Unit =… |
| 1.3.6.1.4.1.20044.60.3.3.14 | Scalarpm10010mptMesrlineSoaBiasCurrent | read-only | current | Line Trscv SOA Bias :This OID gives the SOA bias value of the Line Transceiver,read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/500) (Unit = mA) <H… |
| 1.3.6.1.4.1.20044.60.3.3.80 | Tablepm10010mptMesrlineNetTxLaserOutputPwrTable | not-accessible | current | List of pm10010mptMesrlineNetTxLaserOutputPwr Article |
| 1.3.6.1.4.1.20044.60.3.3.80.1 | Rowpm10010mptMesrlineNetTxLaserOutputPwrEntry | not-accessible | current | Row definition for the pm10010mptMesrlineNetTxLaserOutputPwr table |
| 1.3.6.1.4.1.20044.60.3.3.80.1.1 | Columnpm10010mptMesrlineNetTxLaserOutputPwrIndex | read-only | current | Index definition for the pm10010mptMesrlineNetTxLaserOutputPwr table |
| 1.3.6.1.4.1.20044.60.3.3.80.1.2 | Columnpm10010mptMesrlineNetTxLaserOutputPwrPortn | read-only | current | Current Line Trscv Tx Power :This OID gives the Tx Laser transmit power value of the Line Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power =… |
| 1.3.6.1.4.1.20044.60.3.3.96 | Tablepm10010mptMesrlineNetTxLaserTempTable | not-accessible | current | List of pm10010mptMesrlineNetTxLaserTemp Article |
| 1.3.6.1.4.1.20044.60.3.3.96.1 | Rowpm10010mptMesrlineNetTxLaserTempEntry | not-accessible | current | Row definition for the pm10010mptMesrlineNetTxLaserTemp table |
| 1.3.6.1.4.1.20044.60.3.3.96.1.1 | Columnpm10010mptMesrlineNetTxLaserTempIndex | read-only | current | Index definition for the pm10010mptMesrlineNetTxLaserTemp table |
| 1.3.6.1.4.1.20044.60.3.3.96.1.2 | Columnpm10010mptMesrlineNetTxLaserTempPortn | read-only | current | Current Line Trscv Tx Laser Temperature :This OID gives the Tx Laser Temperature value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitorin… |
| 1.3.6.1.4.1.20044.60.3.3.112 | Tablepm10010mptMesrlineNetTxBiasCurrentTable | not-accessible | current | List of pm10010mptMesrlineNetTxBiasCurrent Article |
| 1.3.6.1.4.1.20044.60.3.3.112.1 | Rowpm10010mptMesrlineNetTxBiasCurrentEntry | not-accessible | current | Row definition for the pm10010mptMesrlineNetTxBiasCurrent table |
| 1.3.6.1.4.1.20044.60.3.3.112.1.1 | Columnpm10010mptMesrlineNetTxBiasCurrentIndex | read-only | current | Index definition for the pm10010mptMesrlineNetTxBiasCurrent table |
| 1.3.6.1.4.1.20044.60.3.3.112.1.2 | Columnpm10010mptMesrlineNetTxBiasCurrentPortn | read-only | current | Current Line Trscv Tx Laser Bias :This OID gives the Tx Laser Bias value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/… |
| 1.3.6.1.4.1.20044.60.3.3.128 | Tablepm10010mptMesrlineNetRxInputPwrTable | not-accessible | current | List of pm10010mptMesrlineNetRxInputPwr Article |
| 1.3.6.1.4.1.20044.60.3.3.128.1 | Rowpm10010mptMesrlineNetRxInputPwrEntry | not-accessible | current | Row definition for the pm10010mptMesrlineNetRxInputPwr table |
| 1.3.6.1.4.1.20044.60.3.3.128.1.1 | Columnpm10010mptMesrlineNetRxInputPwrIndex | read-only | current | Index definition for the pm10010mptMesrlineNetRxInputPwr table |
| 1.3.6.1.4.1.20044.60.3.3.128.1.2 | Columnpm10010mptMesrlineNetRxInputPwrPortn | read-only | current | Current Line Trscv Rx Power :This OID gives the Receive power value of the Line Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power = AV/100) (… |
| 1.3.6.1.4.1.20044.60.3.3.144 | Tablepm10010mptMesrlineResidualChromaticDispTable | not-accessible | current | List of pm10010mptMesrlineResidualChromaticDisp Article |
| 1.3.6.1.4.1.20044.60.3.3.144.1 | Rowpm10010mptMesrlineResidualChromaticDispEntry | not-accessible | current | Row definition for the pm10010mptMesrlineResidualChromaticDisp table |
| 1.3.6.1.4.1.20044.60.3.3.144.1.1 | Columnpm10010mptMesrlineResidualChromaticDispIndex | read-only | current | Index definition for the pm10010mptMesrlineResidualChromaticDisp table |
| 1.3.6.1.4.1.20044.60.3.3.144.1.2 | Columnpm10010mptMesrlineResidualChromaticDispPortn | read-only | current | Current Residual Chromatic Dispersion :This OID gives the current Residual Chromatic Dispersion on the Line interface (Unit = ps/nm)<Help> This measure gives t… |
| 1.3.6.1.4.1.20044.60.3.3.148 | Tablepm10010mptMesrlineDiffGroupDelayTable | not-accessible | current | List of pm10010mptMesrlineDiffGroupDelay Article |
| 1.3.6.1.4.1.20044.60.3.3.148.1 | Rowpm10010mptMesrlineDiffGroupDelayEntry | not-accessible | current | Row definition for the pm10010mptMesrlineDiffGroupDelay table |
| 1.3.6.1.4.1.20044.60.3.3.148.1.1 | Columnpm10010mptMesrlineDiffGroupDelayIndex | read-only | current | Index definition for the pm10010mptMesrlineDiffGroupDelay table |
| 1.3.6.1.4.1.20044.60.3.3.148.1.2 | Columnpm10010mptMesrlineDiffGroupDelayPortn | read-only | current | Current Differential Group Delay :This OID gives the current Differential Group Delay on the Line interface (Unit = ps)<Help> This measure gives the current Di… |
| 1.3.6.1.4.1.20044.60.3.3.152 | Tablepm10010mptMesrlineQFactorTable | not-accessible | current | List of pm10010mptMesrlineQFactor Article |
| 1.3.6.1.4.1.20044.60.3.3.152.1 | Rowpm10010mptMesrlineQFactorEntry | not-accessible | current | Row definition for the pm10010mptMesrlineQFactor table |
| 1.3.6.1.4.1.20044.60.3.3.152.1.1 | Columnpm10010mptMesrlineQFactorIndex | read-only | current | Index definition for the pm10010mptMesrlineQFactor table |
| 1.3.6.1.4.1.20044.60.3.3.152.1.2 | Columnpm10010mptMesrlineQFactorPortn | read-only | current | Current Q Factor :This OID gives the current Q Factor on the Line interface (Unit = dB) <Help> This measure gives the current Q Factor on the Line interface. |
| 1.3.6.1.4.1.20044.60.3.3.156 | Tablepm10010mptMesrlineCarrierFreqOffsetTable | not-accessible | current | List of pm10010mptMesrlineCarrierFreqOffset Article |
| 1.3.6.1.4.1.20044.60.3.3.156.1 | Rowpm10010mptMesrlineCarrierFreqOffsetEntry | not-accessible | current | Row definition for the pm10010mptMesrlineCarrierFreqOffset table |
| 1.3.6.1.4.1.20044.60.3.3.156.1.1 | Columnpm10010mptMesrlineCarrierFreqOffsetIndex | read-only | current | Index definition for the pm10010mptMesrlineCarrierFreqOffset table |
| 1.3.6.1.4.1.20044.60.3.3.156.1.2 | Columnpm10010mptMesrlineCarrierFreqOffsetPortn | read-only | current | Current Carrier Frequency Offset :This OID gives the current Carrier Frequency Offset on the Line interface (Unit = Mhz)<Help> This measure gives the current C… |
| 1.3.6.1.4.1.20044.60.3.3.160 | Tablepm10010mptMesrlineOsnrTable | not-accessible | current | List of pm10010mptMesrlineOsnr Article |
| 1.3.6.1.4.1.20044.60.3.3.160.1 | Rowpm10010mptMesrlineOsnrEntry | not-accessible | current | Row definition for the pm10010mptMesrlineOsnr table |
| 1.3.6.1.4.1.20044.60.3.3.160.1.1 | Columnpm10010mptMesrlineOsnrIndex | read-only | current | Index definition for the pm10010mptMesrlineOsnr table |
| 1.3.6.1.4.1.20044.60.3.3.160.1.2 | Columnpm10010mptMesrlineOsnrPortn | read-only | current | Current OSNR :This OID gives the current OSNR on the Line interface (OSNR = AV/10) (Unit = dB) <Help> This measure gives the current OSNR on the Line interface. |
| 1.3.6.1.4.1.20044.60.4 | Nodepm10010mptcounters | |||
| 1.3.6.1.4.1.20044.60.4.1 | Nodepm10010mptCntOther | |||
| 1.3.6.1.4.1.20044.60.4.2 | Nodepm10010mptCntClient | |||
| 1.3.6.1.4.1.20044.60.4.2.16 | Tablepm10010mptCntclientInputErrorCounterLaneOneTable | not-accessible | current | List of pm10010mptCntclientInputErrorCounterLaneOne Article |
| 1.3.6.1.4.1.20044.60.4.2.16.1 | Rowpm10010mptCntclientInputErrorCounterLaneOneEntry | not-accessible | current | Row definition for the pm10010mptCntclientInputErrorCounterLaneOne table |
| 1.3.6.1.4.1.20044.60.4.2.16.1.1 | Columnpm10010mptCntclientInputErrorCounterLaneOneIndex | read-only | current | Index definition for the pm10010mptCntclientInputErrorCounterLaneOne table |
| 1.3.6.1.4.1.20044.60.4.2.16.1.2 | Columnpm10010mptCntclientInputErrorCounterLaneOneValuePortn | read-only | current | Client_Input_Error_Counter_Lane1 :This counter is incremented each time a coding violation is detected on the host lane of the client transceiver <Help> This c… |
| 1.3.6.1.4.1.20044.60.4.2.16.1.3 | Columnpm10010mptCntclientInputErrorCounterLaneOneErrorPortn | read-only | current | Client Input Counter Error :This OID when set indicates the rate adaptation removal counter value is invalid on Port |
| 1.3.6.1.4.1.20044.60.4.2.16.1.4 | Columnpm10010mptCntclientInputErrorCounterLaneOneOverloadPortn | read-only | current | Client Input Counter Overload :This OID when set indicates a rate adaptation removal counter overload on Port |
| 1.3.6.1.4.1.20044.60.4.2.32 | Tablepm10010mptCntclientInputErrorCounterLaneTwoTable | not-accessible | current | List of pm10010mptCntclientInputErrorCounterLaneTwo Article |
| 1.3.6.1.4.1.20044.60.4.2.32.1 | Rowpm10010mptCntclientInputErrorCounterLaneTwoEntry | not-accessible | current | Row definition for the pm10010mptCntclientInputErrorCounterLaneTwo table |
| 1.3.6.1.4.1.20044.60.4.2.32.1.1 | Columnpm10010mptCntclientInputErrorCounterLaneTwoIndex | read-only | current | Index definition for the pm10010mptCntclientInputErrorCounterLaneTwo table |
| 1.3.6.1.4.1.20044.60.4.2.32.1.2 | Columnpm10010mptCntclientInputErrorCounterLaneTwoValuePortn | read-only | current | Client_Input_Error_Counter_Lane2 :This counter is incremented each time a coding violation is detected on the host lane of the client transceiver <Help> This c… |
| 1.3.6.1.4.1.20044.60.4.2.32.1.3 | Columnpm10010mptCntclientInputErrorCounterLaneTwoErrorPortn | read-only | current | Client Input Counter Error :This OID when set indicates the client error counter value is invalid on Port |
| 1.3.6.1.4.1.20044.60.4.2.32.1.4 | Columnpm10010mptCntclientInputErrorCounterLaneTwoOverloadPortn | read-only | current | Client Input Counter Overload :This OID when set indicates a client input error counter overload on Port |
| 1.3.6.1.4.1.20044.60.4.2.80 | Tablepm10010mptCntclientInputErrorCounterTable | not-accessible | current | List of pm10010mptCntclientInputErrorCounter Article |
| 1.3.6.1.4.1.20044.60.4.2.80.1 | Rowpm10010mptCntclientInputErrorCounterEntry | not-accessible | current | Row definition for the pm10010mptCntclientInputErrorCounter table |
| 1.3.6.1.4.1.20044.60.4.2.80.1.1 | Columnpm10010mptCntclientInputErrorCounterIndex | read-only | current | Index definition for the pm10010mptCntclientInputErrorCounter table |
| 1.3.6.1.4.1.20044.60.4.2.80.1.2 | Columnpm10010mptCntclientInputErrorCounterValuePortn | read-only | current | Client Input Errors :This counter is increased each time a 10b/8b running disparity error is detected on the Client input stream <Help> This counter gives the … |
| 1.3.6.1.4.1.20044.60.4.2.80.1.3 | Columnpm10010mptCntclientInputErrorCounterErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the client error counter value is invalid on Port |
| 1.3.6.1.4.1.20044.60.4.2.80.1.4 | Columnpm10010mptCntclientInputErrorCounterOverloadPortn | read-only | current | Client Counter Overload :This OID when set indicates a client input error counter overload on Port |
| 1.3.6.1.4.1.20044.60.4.2.96 | Tablepm10010mptCntclientCbipCounterTable | not-accessible | current | List of pm10010mptCntclientCbipCounter Article |
| 1.3.6.1.4.1.20044.60.4.2.96.1 | Rowpm10010mptCntclientCbipCounterEntry | not-accessible | current | Row definition for the pm10010mptCntclientCbipCounter table |
| 1.3.6.1.4.1.20044.60.4.2.96.1.1 | Columnpm10010mptCntclientCbipCounterIndex | read-only | current | Index definition for the pm10010mptCntclientCbipCounter table |
| 1.3.6.1.4.1.20044.60.4.2.96.1.2 | Columnpm10010mptCntclientCbipCounterValuePortn | read-only | current | Client Output Errors :This counter is incremented each time a CBIP parity error is detected on the Client output stream <Help> This counter gives the number of… |
| 1.3.6.1.4.1.20044.60.4.2.96.1.3 | Columnpm10010mptCntclientCbipCounterErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the CBIP error counter value is invalid on Port |
| 1.3.6.1.4.1.20044.60.4.2.96.1.4 | Columnpm10010mptCntclientCbipCounterOverloadPortn | read-only | current | Client CBIP Counter Overload :This OID when set indicates a CBIP error counter overload on Port |
| 1.3.6.1.4.1.20044.60.4.3 | Nodepm10010mptCntLine | |||
| 1.3.6.1.4.1.20044.60.4.3.192 | Tablepm10010mptCntlocalLineSmBip8ErrorCounterTable | not-accessible | current | List of pm10010mptCntlocalLineSmBip8ErrorCounter Article |
| 1.3.6.1.4.1.20044.60.4.3.192.1 | Rowpm10010mptCntlocalLineSmBip8ErrorCounterEntry | not-accessible | current | Row definition for the pm10010mptCntlocalLineSmBip8ErrorCounter table |
| 1.3.6.1.4.1.20044.60.4.3.192.1.1 | Columnpm10010mptCntlocalLineSmBip8ErrorCounterIndex | read-only | current | Index definition for the pm10010mptCntlocalLineSmBip8ErrorCounter table |
| 1.3.6.1.4.1.20044.60.4.3.192.1.2 | Columnpm10010mptCntlocalLineSmBip8ErrorCounterValuePortn | read-only | current | Line Input SM-BIP8 Errors :This OID gives the current Bit Error Rate (residual SM-BIP8 error) after FEC <Help> This counter gives the current Bit Error Rate (r… |
| 1.3.6.1.4.1.20044.60.4.3.192.1.3 | Columnpm10010mptCntlocalLineSmBip8ErrorCounterErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the B1 error counter value is invalid on Port |
| 1.3.6.1.4.1.20044.60.4.3.192.1.4 | Columnpm10010mptCntlocalLineSmBip8ErrorCounterOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a B1 error counter overload on Port |
| 1.3.6.1.4.1.20044.60.4.3.193 | Tablepm10010mptCntlocalLineFecCorrectedErrorsCounterTable | not-accessible | current | List of pm10010mptCntlocalLineFecCorrectedErrorsCounter Article |
| 1.3.6.1.4.1.20044.60.4.3.193.1 | Rowpm10010mptCntlocalLineFecCorrectedErrorsCounterEntry | not-accessible | current | Row definition for the pm10010mptCntlocalLineFecCorrectedErrorsCounter table |
| 1.3.6.1.4.1.20044.60.4.3.193.1.1 | Columnpm10010mptCntlocalLineFecCorrectedErrorsCounterIndex | read-only | current | Index definition for the pm10010mptCntlocalLineFecCorrectedErrorsCounter table |
| 1.3.6.1.4.1.20044.60.4.3.193.1.2 | Columnpm10010mptCntlocalLineFecCorrectedErrorsCounterValuePortn | read-only | current | Line Input HD FEC Corrected Errors :This OID gives the current Bit Error Rate before the Hard Decision FEC <Help> This counter gives the current Bit Error Rate… |
| 1.3.6.1.4.1.20044.60.4.3.193.1.3 | Columnpm10010mptCntlocalLineFecCorrectedErrorsCounterErrorPortn | read-only | current | FEC Counter Error :This bit when set indicates the FEC corrected errors counter value is invalid on Line |
| 1.3.6.1.4.1.20044.60.4.3.193.1.4 | Columnpm10010mptCntlocalLineFecCorrectedErrorsCounterOverloadPortn | read-only | current | FEC Counter Overload :This bit when set indicates a FEC corrected errors counter overload on Line |
| 1.3.6.1.4.1.20044.60.4.3.194 | Tablepm10010mptCntremoteLineSmBip8ErrorCounterTable | not-accessible | current | List of pm10010mptCntremoteLineSmBip8ErrorCounter Article |
| 1.3.6.1.4.1.20044.60.4.3.194.1 | Rowpm10010mptCntremoteLineSmBip8ErrorCounterEntry | not-accessible | current | Row definition for the pm10010mptCntremoteLineSmBip8ErrorCounter table |
| 1.3.6.1.4.1.20044.60.4.3.194.1.1 | Columnpm10010mptCntremoteLineSmBip8ErrorCounterIndex | read-only | current | Index definition for the pm10010mptCntremoteLineSmBip8ErrorCounter table |
| 1.3.6.1.4.1.20044.60.4.3.194.1.2 | Columnpm10010mptCntremoteLineSmBip8ErrorCounterValuePortn | read-only | current | Remote SM BIP8 :This OID gives the current Bit Error Rate (residual SM-BIP8 error) after FEC on the remote side <Help> This counter gives the current Bit Error… |
| 1.3.6.1.4.1.20044.60.4.3.194.1.3 | Columnpm10010mptCntremoteLineSmBip8ErrorCounterErrorPortn | read-only | current | Remote Counter Error : |
| 1.3.6.1.4.1.20044.60.4.3.194.1.4 | Columnpm10010mptCntremoteLineSmBip8ErrorCounterOverloadPortn | read-only | current | Remote Counter Overload : |
| 1.3.6.1.4.1.20044.60.4.3.195 | Tablepm10010mptCntlineDfrmTimCntTable | not-accessible | current | List of pm10010mptCntlineDfrmTimCnt Article |
| 1.3.6.1.4.1.20044.60.4.3.195.1 | Rowpm10010mptCntlineDfrmTimCntEntry | not-accessible | current | Row definition for the pm10010mptCntlineDfrmTimCnt table |
| 1.3.6.1.4.1.20044.60.4.3.195.1.1 | Columnpm10010mptCntlineDfrmTimCntIndex | read-only | current | Index definition for the pm10010mptCntlineDfrmTimCnt table |
| 1.3.6.1.4.1.20044.60.4.3.195.1.2 | Columnpm10010mptCntlineDfrmTimCntValuePortn | read-only | current | Line Timer Counter : |
| 1.3.6.1.4.1.20044.60.4.3.195.1.3 | Columnpm10010mptCntlineDfrmTimCntErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port |
| 1.3.6.1.4.1.20044.60.4.3.195.1.4 | Columnpm10010mptCntlineDfrmTimCntOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port |
| 1.3.6.1.4.1.20044.60.4.3.196 | Tablepm10010mptCntlocalLineTrscvFecCorrectedErrorCounterTable | not-accessible | current | List of pm10010mptCntlocalLineTrscvFecCorrectedErrorCounter Article |
| 1.3.6.1.4.1.20044.60.4.3.196.1 | Rowpm10010mptCntlocalLineTrscvFecCorrectedErrorCounterEntry | not-accessible | current | Row definition for the pm10010mptCntlocalLineTrscvFecCorrectedErrorCounter table |
| 1.3.6.1.4.1.20044.60.4.3.196.1.1 | Columnpm10010mptCntlocalLineTrscvFecCorrectedErrorCounterIndex | read-only | current | Index definition for the pm10010mptCntlocalLineTrscvFecCorrectedErrorCounter table |
| 1.3.6.1.4.1.20044.60.4.3.196.1.2 | Columnpm10010mptCntlocalLineTrscvFecCorrectedErrorCounterValuePortn | read-only | current | Line Input SD FEC Corrected Errors :This OID gives the current Bit Error Rate before the Soft Decision FEC <Help> This counter gives the current Bit Error Rate… |
| 1.3.6.1.4.1.20044.60.4.3.196.1.3 | Columnpm10010mptCntlocalLineTrscvFecCorrectedErrorCounterErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port |
| 1.3.6.1.4.1.20044.60.4.3.196.1.4 | Columnpm10010mptCntlocalLineTrscvFecCorrectedErrorCounterOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port |
| 1.3.6.1.4.1.20044.60.4.3.197 | Tablepm10010mptCntlocalLineTrscvFecUncorrectedErrorCounterTable | not-accessible | current | List of pm10010mptCntlocalLineTrscvFecUncorrectedErrorCounter Article |
| 1.3.6.1.4.1.20044.60.4.3.197.1 | Rowpm10010mptCntlocalLineTrscvFecUncorrectedErrorCounterEntry | not-accessible | current | Row definition for the pm10010mptCntlocalLineTrscvFecUncorrectedErrorCounter table |
| 1.3.6.1.4.1.20044.60.4.3.197.1.1 | Columnpm10010mptCntlocalLineTrscvFecUncorrectedErrorCounterIndex | read-only | current | Index definition for the pm10010mptCntlocalLineTrscvFecUncorrectedErrorCounter table |
| 1.3.6.1.4.1.20044.60.4.3.197.1.2 | Columnpm10010mptCntlocalLineTrscvFecUncorrectedErrorCounterValuePortn | read-only | current | SD Uncorrected :This OID gives the current Bit Error Rate after the Soft Decision FEC (residual) <Help> This counter gives the current Bit Error Rate after the… |
| 1.3.6.1.4.1.20044.60.4.3.197.1.3 | Columnpm10010mptCntlocalLineTrscvFecUncorrectedErrorCounterErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port |
| 1.3.6.1.4.1.20044.60.4.3.197.1.4 | Columnpm10010mptCntlocalLineTrscvFecUncorrectedErrorCounterOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port |
| 1.3.6.1.4.1.20044.60.6 | Nodepm10010mptcontrolsWrite | |||
| 1.3.6.1.4.1.20044.60.6.1 | Nodepm10010mptCtrlOther | |||
| 1.3.6.1.4.1.20044.60.6.1.1 | Nodepm10010mptCtrlconfMgnt1 | |||
| 1.3.6.1.4.1.20044.60.6.1.1.1 | Scalarpm10010mptCtrlConf1Load1 | read-write | current | Load Configuration Tables Set Nb 1 :When set this OID enables loading from flash configuration1 into the PM. |
| 1.3.6.1.4.1.20044.60.6.1.1.2 | Scalarpm10010mptCtrlConf2Load1 | read-write | current | Load Configuration Tables Set Nb 2 :When set this OID enables loading from flash configuration2 into the PM. |
| 1.3.6.1.4.1.20044.60.6.1.1.10 | Scalarpm10010mptCtrlConf2Flash1 | read-write | current | Write Configuration Tables :This OID saves the current configuration of the PM as configuration2 in the flash. <Help> This control saves the customer configura… |
| 1.3.6.1.4.1.20044.60.6.1.1.14 | Scalarpm10010mptCtrlConf2Clear1 | read-write | current | Clear Configuration Tables :This OID clears the configuration tables from configuration2 in the flash. <Help> This control restores the default configuration o… |
| 1.3.6.1.4.1.20044.60.6.1.4 | Nodepm10010mptCtrlsynth4 | |||
| 1.3.6.1.4.1.20044.60.6.1.4.1 | Scalarpm10010mptCtrlCorrelatOn | read-write | current | Enable Alarm Correlation :This OID enables the alarm correlation in the PM. |
| 1.3.6.1.4.1.20044.60.6.1.4.2 | Scalarpm10010mptCtrlCorrelatOff | read-write | current | Disable Alarm Correlation :This OID disables the alarm correlation in the PM. |
| 1.3.6.1.4.1.20044.60.6.1.5 | Nodepm10010mptCtrlswMgnt | |||
| 1.3.6.1.4.1.20044.60.6.1.5.2 | Scalarpm10010mptCtrlColdReset | read-write | current | PM Cold Reset :This OID, when set, causes a cold reset of the PM. This reset is traffic affecting, and the configuration of PM is reloaded on start-up. <Help> … |
| 1.3.6.1.4.1.20044.60.6.1.5.3 | Scalarpm10010mptCtrlWarmReset | read-write | current | PM Warm Reset :This OID, when set, causes a warm reset of the PM. This reset is not traffic affecting, and the configuration of PM remains unchanged. <Help> Th… |
| 1.3.6.1.4.1.20044.60.6.1.5.5 | Scalarpm10010mptCtrlLoadSwBank1 | read-write | current | Set Software Nb 1 As Active :This OID, when set, loads the SW from bank1 into the PM. It must be followed by a reset. <Help> This controls selects the first SW… |
| 1.3.6.1.4.1.20044.60.6.1.5.6 | Scalarpm10010mptCtrlLoadSwBank2 | read-write | current | Set Software Nb 2 As Active :This OID, when set, loads the SW from bank2 into the PM. It must be followed by a reset. <Help> This controls selects the second S… |
| 1.3.6.1.4.1.20044.60.6.1.6 | Nodepm10010mptCtrlgwMgnt | |||
| 1.3.6.1.4.1.20044.60.6.1.6.1 | Scalarpm10010mptCtrlCurrentGwReset | read-write | current | Active Gateware Reset :This OID, when set, resets the active gateware. It is traffic affecting. |
| 1.3.6.1.4.1.20044.60.6.1.6.5 | Scalarpm10010mptCtrlLoadGwBank1 | read-write | current | Set Gateware Nb 1 As Active :This OID, when set, loads the GW from bank1 (Flash) into the PM. It is followed by an automatic gateware cold reset. <Help> This c… |
| 1.3.6.1.4.1.20044.60.6.1.6.6 | Scalarpm10010mptCtrlLoadGwBank2 | read-write | current | Set Gateware Nb 2 As Active :This OID, when set, loads the GW from bank2 (Flash) into the PM. It is followed by an automatic gateware cold reset. |
| 1.3.6.1.4.1.20044.60.6.1.6.7 | Scalarpm10010mptCtrlLoadGwBank3 | read-write | current | Set Gateware Nb 3 As Active :This OID, when set, loads the GW from bank3 (Flash) into the PM. It is followed by an automatic gateware cold reset. <Help> This c… |
| 1.3.6.1.4.1.20044.60.6.1.6.8 | Scalarpm10010mptCtrlLoadGwBank4 | read-write | current | Set Gateware Nb 4 As Active :This OID, when set, loads the GW from bank4 (Flash) into the PM. It is followed by an automatic gateware cold reset. |
| 1.3.6.1.4.1.20044.60.6.1.192 | Nodepm10010mptCtrlledTest | |||
| 1.3.6.1.4.1.20044.60.6.1.192.1 | Scalarpm10010mptCtrlGreenLed | read-write | current | Green Leds Test :This OID switches on all the green Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to green |
| 1.3.6.1.4.1.20044.60.6.1.192.2 | Scalarpm10010mptCtrlRedLed | read-write | current | Red Leds Test :This OID switches on all the red Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to red |
| 1.3.6.1.4.1.20044.60.6.1.192.3 | Scalarpm10010mptCtrlLedOff | read-write | current | Leds Off :This OID switches off all the Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to OFF |
| 1.3.6.1.4.1.20044.60.6.1.201 | Nodepm10010mptCtrlinitSwitchMarvell | |||
| 1.3.6.1.4.1.20044.60.6.1.201.1 | Scalarpm10010mptCtrlInitSwitchMarvell | read-write | current | Switch Initialization :This OID operates an initialization of the switch managed through the module <Help> This control activates an initialization of the swit… |
| 1.3.6.1.4.1.20044.60.6.1.259 | Nodepm10010mptCtrlresetCount | |||
| 1.3.6.1.4.1.20044.60.6.1.259.1 | Scalarpm10010mptCtrlResetcount | read-write | current | Module Count Global Reset :This OID resets all the errors counters on the module <Help > This control initiates a reset of the errors counters on the module |
| 1.3.6.1.4.1.20044.60.6.1.260 | Nodepm10010mptCtrlresetRmon | |||
| 1.3.6.1.4.1.20044.60.6.1.260.1 | Scalarpm10010mptCtrlResetrmon | read-write | current | Module Rmon Global Reset :This OID resets all the Rmon counters on the module <Help > This control initiates a reset of the Rmon counters on the module |
| 1.3.6.1.4.1.20044.60.6.1.261 | Nodepm10010mptCtrlresetMeasurements | |||
| 1.3.6.1.4.1.20044.60.6.1.261.1 | Scalarpm10010mptCtrlResetmeasurements | read-write | current | Management Meas Global Reset :This OID resets some measurements on the management <Help > This control initiates a reset of some measurements on the management |
| 1.3.6.1.4.1.20044.60.6.2 | Nodepm10010mptCtrlClient | |||
| 1.3.6.1.4.1.20044.60.6.2.16 | Tablepm10010mptCtrlaccessLoopTable | not-accessible | current | List of pm10010mptCtrlaccessLoop Article |
| 1.3.6.1.4.1.20044.60.6.2.16.1 | Rowpm10010mptCtrlaccessLoopEntry | not-accessible | current | Row definition for the pm10010mptCtrlaccessLoop table |
| 1.3.6.1.4.1.20044.60.6.2.16.1.1 | Columnpm10010mptCtrlaccessLoopIndex | read-only | current | Index definition for the pm10010mptCtrlaccessLoop table |
| 1.3.6.1.4.1.20044.60.6.2.16.1.2 | Columnpm10010mptCtrlaccessLoopPortn | read-write | current | Client Facility Loopback :This OID, when set at '1' puts the client port in loopback, looping the received 10 Gb/s signal on the transmit 10 Gb/s output. <Help… |
| 1.3.6.1.4.1.20044.60.6.2.17 | Tablepm10010mptCtrlclientLoopToLineTable | not-accessible | current | List of pm10010mptCtrlclientLoopToLine Article |
| 1.3.6.1.4.1.20044.60.6.2.17.1 | Rowpm10010mptCtrlclientLoopToLineEntry | not-accessible | current | Row definition for the pm10010mptCtrlclientLoopToLine table |
| 1.3.6.1.4.1.20044.60.6.2.17.1.1 | Columnpm10010mptCtrlclientLoopToLineIndex | read-only | current | Index definition for the pm10010mptCtrlclientLoopToLine table |
| 1.3.6.1.4.1.20044.60.6.2.17.1.2 | Columnpm10010mptCtrlclientLoopToLinePortn | read-write | current | Client Terminal Loopback :This OID, when set, puts the client port in loop back, looping the 10 Gb/s output signal on the 10 Gb/s input.<Help> This control ena… |
| 1.3.6.1.4.1.20044.60.6.2.21 | Tablepm10010mptCtrlcsfUpInsTable | not-accessible | current | List of pm10010mptCtrlcsfUpIns Article |
| 1.3.6.1.4.1.20044.60.6.2.21.1 | Rowpm10010mptCtrlcsfUpInsEntry | not-accessible | current | Row definition for the pm10010mptCtrlcsfUpIns table |
| 1.3.6.1.4.1.20044.60.6.2.21.1.1 | Columnpm10010mptCtrlcsfUpInsIndex | read-only | current | Index definition for the pm10010mptCtrlcsfUpIns table |
| 1.3.6.1.4.1.20044.60.6.2.21.1.2 | Columnpm10010mptCtrlcsfUpInsPortn | read-write | current | Client Signal Fail Insertion :This OID, when set, inserts a client signal fail in the upstream client Port. <Help> This control inserts a Client Signal Fail fo… |
| 1.3.6.1.4.1.20044.60.6.2.22 | Tablepm10010mptCtrlcaisDwInsTable | not-accessible | current | List of pm10010mptCtrlcaisDwIns Article |
| 1.3.6.1.4.1.20044.60.6.2.22.1 | Rowpm10010mptCtrlcaisDwInsEntry | not-accessible | current | Row definition for the pm10010mptCtrlcaisDwIns table |
| 1.3.6.1.4.1.20044.60.6.2.22.1.1 | Columnpm10010mptCtrlcaisDwInsIndex | read-only | current | Index definition for the pm10010mptCtrlcaisDwIns table |
| 1.3.6.1.4.1.20044.60.6.2.22.1.2 | Columnpm10010mptCtrlcaisDwInsPortn | read-write | current | Client AIS Insertion :This OID, when set, inserts a client AIS on the downstream client Port. <Help> This control inserts a Client AIS for the client port |
| 1.3.6.1.4.1.20044.60.6.2.262 | Tablepm10010mptCtrlclientResetAllCountTable | not-accessible | current | List of pm10010mptCtrlclientResetAllCount Article |
| 1.3.6.1.4.1.20044.60.6.2.262.1 | Rowpm10010mptCtrlclientResetAllCountEntry | not-accessible | current | Row definition for the pm10010mptCtrlclientResetAllCount table |
| 1.3.6.1.4.1.20044.60.6.2.262.1.1 | Columnpm10010mptCtrlclientResetAllCountIndex | read-only | current | Index definition for the pm10010mptCtrlclientResetAllCount table |
| 1.3.6.1.4.1.20044.60.6.2.262.1.2 | Columnpm10010mptCtrlclientResetAllCountsPortn | read-write | current | Client Counters Reset :This OID resets every counter on the client port <Help> This control operates a reset on the statistics current ,previous and history cl… |
| 1.3.6.1.4.1.20044.60.6.3 | Nodepm10010mptCtrlLine | |||
| 1.3.6.1.4.1.20044.60.6.3.64 | Tablepm10010mptCtrlcommAccessLoopTable | not-accessible | current | List of pm10010mptCtrlcommAccessLoop Article |
| 1.3.6.1.4.1.20044.60.6.3.64.1 | Rowpm10010mptCtrlcommAccessLoopEntry | not-accessible | current | Row definition for the pm10010mptCtrlcommAccessLoop table |
| 1.3.6.1.4.1.20044.60.6.3.64.1.1 | Columnpm10010mptCtrlcommAccessLoopIndex | read-only | current | Index definition for the pm10010mptCtrlcommAccessLoop table |
| 1.3.6.1.4.1.20044.60.6.3.64.1.2 | Columnpm10010mptCtrlcommAccessLoopPortn | read-write | current | Line Terminal Loopback :This OID, when set, puts the module in common access loop back, looping the 100 Gb/s output signal on the 100 Gb/s input.<Help> This co… |
| 1.3.6.1.4.1.20044.60.6.3.66 | Tablepm10010mptCtrllineLoopTable | not-accessible | current | List of pm10010mptCtrllineLoop Article |
| 1.3.6.1.4.1.20044.60.6.3.66.1 | Rowpm10010mptCtrllineLoopEntry | not-accessible | current | Row definition for the pm10010mptCtrllineLoop table |
| 1.3.6.1.4.1.20044.60.6.3.66.1.1 | Columnpm10010mptCtrllineLoopIndex | read-only | current | Index definition for the pm10010mptCtrllineLoop table |
| 1.3.6.1.4.1.20044.60.6.3.66.1.2 | Columnpm10010mptCtrllineLoopPortn | read-write | current | Line Facility Loopback :This OID, when set at '1' puts the module in line loopback mode, looping the received 100 Gb/s signal on the transmit 100 Gb/s output. … |
| 1.3.6.1.4.1.20044.60.6.3.69 | Tablepm10010mptCtrlfecDisableTable | not-accessible | current | List of pm10010mptCtrlfecDisable Article |
| 1.3.6.1.4.1.20044.60.6.3.69.1 | Rowpm10010mptCtrlfecDisableEntry | not-accessible | current | Row definition for the pm10010mptCtrlfecDisable table |
| 1.3.6.1.4.1.20044.60.6.3.69.1.1 | Columnpm10010mptCtrlfecDisableIndex | read-only | current | Index definition for the pm10010mptCtrlfecDisable table |
| 1.3.6.1.4.1.20044.60.6.3.69.1.2 | Columnpm10010mptCtrlfecDisablePortn | read-write | current | Forward Error Correction Inhibition :This OID, when set, inhibits the Forward Error Correction feature on the line input <Help> This control enables/disables t… |
| 1.3.6.1.4.1.20044.60.6.3.209 | Tablepm10010mptCtrlmsaLineLoopTable | not-accessible | current | List of pm10010mptCtrlmsaLineLoop Article |
| 1.3.6.1.4.1.20044.60.6.3.209.1 | Rowpm10010mptCtrlmsaLineLoopEntry | not-accessible | current | Row definition for the pm10010mptCtrlmsaLineLoop table |
| 1.3.6.1.4.1.20044.60.6.3.209.1.1 | Columnpm10010mptCtrlmsaLineLoopIndex | read-only | current | Index definition for the pm10010mptCtrlmsaLineLoop table |
| 1.3.6.1.4.1.20044.60.6.3.209.1.2 | Columnpm10010mptCtrlmsaLineLoopPortn | read-write | current | MSA Line Loop :This OID operates a line loopback on the MSA Line <Help> This control defines the line loop back of the line transceiver |
| 1.3.6.1.4.1.20044.60.6.3.210 | Tablepm10010mptCtrlmsaTxResetTable | not-accessible | current | List of pm10010mptCtrlmsaTxReset Article |
| 1.3.6.1.4.1.20044.60.6.3.210.1 | Rowpm10010mptCtrlmsaTxResetEntry | not-accessible | current | Row definition for the pm10010mptCtrlmsaTxReset table |
| 1.3.6.1.4.1.20044.60.6.3.210.1.1 | Columnpm10010mptCtrlmsaTxResetIndex | read-only | current | Index definition for the pm10010mptCtrlmsaTxReset table |
| 1.3.6.1.4.1.20044.60.6.3.210.1.2 | Columnpm10010mptCtrlmsaTxResetPortn | read-write | current | Line MSA TX Reset :This OID resets the TX portion of the MSA line module <Help > This control initiates a reset of the transmitting side |
| 1.3.6.1.4.1.20044.60.6.3.211 | Tablepm10010mptCtrlmsaRxResetTable | not-accessible | current | List of pm10010mptCtrlmsaRxReset Article |
| 1.3.6.1.4.1.20044.60.6.3.211.1 | Rowpm10010mptCtrlmsaRxResetEntry | not-accessible | current | Row definition for the pm10010mptCtrlmsaRxReset table |
| 1.3.6.1.4.1.20044.60.6.3.211.1.1 | Columnpm10010mptCtrlmsaRxResetIndex | read-only | current | Index definition for the pm10010mptCtrlmsaRxReset table |
| 1.3.6.1.4.1.20044.60.6.3.211.1.2 | Columnpm10010mptCtrlmsaRxResetPortn | read-write | current | Line MSA RX Reset :This OID resets the RX portion of the MSA line module <Help > This control initiates a reset of the receiving side |
| 1.3.6.1.4.1.20044.60.6.3.212 | Tablepm10010mptCtrlmsaShutdownTable | not-accessible | current | List of pm10010mptCtrlmsaShutdown Article |
| 1.3.6.1.4.1.20044.60.6.3.212.1 | Rowpm10010mptCtrlmsaShutdownEntry | not-accessible | current | Row definition for the pm10010mptCtrlmsaShutdown table |
| 1.3.6.1.4.1.20044.60.6.3.212.1.1 | Columnpm10010mptCtrlmsaShutdownIndex | read-only | current | Index definition for the pm10010mptCtrlmsaShutdown table |
| 1.3.6.1.4.1.20044.60.6.3.212.1.2 | Columnpm10010mptCtrlmsaShutdownPortn | read-write | current | Line MSA Shutdown :This OID enters a process to shutdown the MSA line module <Help > This control initiates a shutdown of the module |
| 1.3.6.1.4.1.20044.60.6.3.263 | Tablepm10010mptCtrllineResetAllCountTable | not-accessible | current | List of pm10010mptCtrllineResetAllCount Article |
| 1.3.6.1.4.1.20044.60.6.3.263.1 | Rowpm10010mptCtrllineResetAllCountEntry | not-accessible | current | Row definition for the pm10010mptCtrllineResetAllCount table |
| 1.3.6.1.4.1.20044.60.6.3.263.1.1 | Columnpm10010mptCtrllineResetAllCountIndex | read-only | current | Index definition for the pm10010mptCtrllineResetAllCount table |
| 1.3.6.1.4.1.20044.60.6.3.263.1.2 | Columnpm10010mptCtrllineResetAllCountsPortn | read-write | current | Line Counters Reset :This OID resets every counter on the line port <Help> This control operates a reset on the statistics current ,previous and history line p… |
| 1.3.6.1.4.1.20044.60.7 | Nodepm10010mptri | |||
| 1.3.6.1.4.1.20044.60.7.1 | Nodepm10010mptriTable | |||
| 1.3.6.1.4.1.20044.60.7.1.1 | Tablepm10010mptRinvSfpTable | not-accessible | current | List of the SFPs on the selected module |
| 1.3.6.1.4.1.20044.60.7.1.1.1 | Rowpm10010mptRinvSfpEntry | not-accessible | current | Row definition for the SFP table |
| 1.3.6.1.4.1.20044.60.7.1.1.1.1 | Columnpm10010mptRinvSfpIndex | read-only | current | Index for SFP table |
| 1.3.6.1.4.1.20044.60.7.1.1.1.2 | Columnpm10010mptRinvsfp | read-only | current | Inventory for the SFP: This OID contains the inventory for the SFP |
| 1.3.6.1.4.1.20044.60.7.1.2 | Tablepm10010mptRinvLineTable | not-accessible | current | List of the XFPs on the selected module |
| 1.3.6.1.4.1.20044.60.7.1.2.1 | Rowpm10010mptRinvLineEntry | not-accessible | current | Row definition for the XFP table |
| 1.3.6.1.4.1.20044.60.7.1.2.1.1 | Columnpm10010mptRinvLineIndex | read-only | current | Index for XFP table |
| 1.3.6.1.4.1.20044.60.7.1.2.1.2 | Columnpm10010mptRinvxfpLine | read-only | current | Inventory for the XFP: This OID contains the inventory for the XFP |
| 1.3.6.1.4.1.20044.60.7.2 | Scalarpm10010mptRinvReloadInventory | read-write | current | Reload the inventory: This OID triggers an inventory reload. |
| 1.3.6.1.4.1.20044.60.7.3 | Scalarpm10010mptRinvHwPlatform | read-only | current | HW platform description: This OID contains the description of the Hardware platform. |
| 1.3.6.1.4.1.20044.60.7.4 | Scalarpm10010mptRinvModulePlatform | read-only | current | Module platform description: This OID contains the description of the Module. |
| 1.3.6.1.4.1.20044.60.7.5 | Scalarpm10010mptRinvSwPlatform | read-only | current | SW platform description: This OID contains the description of the Software platform. |
| 1.3.6.1.4.1.20044.60.7.6 | Scalarpm10010mptRinvGwPlatform | read-only | current | GW platform desciption: This OID contains the description of the Gateware platform. |
| 1.3.6.1.4.1.20044.60.8 | Nodepm10010mptdownload | |||
| 1.3.6.1.4.1.20044.60.8.1 | Nodepm10010mptDwlOther | |||
| 1.3.6.1.4.1.20044.60.8.1.0 | Nodepm10010mptDwlrestartProcess | |||
| 1.3.6.1.4.1.20044.60.8.1.0.1 | Scalarpm10010mptDwlWarmRestartProcessed | read-only | current | Warm Restart :This OID indicates that the module last restart was a Warm RESTART |
| 1.3.6.1.4.1.20044.60.8.1.0.2 | Scalarpm10010mptDwlColdRestartProcessed | read-only | current | Cold Restart :This OID indicates that the module last restart was a Cold RESTART |
| 1.3.6.1.4.1.20044.60.8.1.1 | Nodepm10010mptDwlswBanksUsed | |||
| 1.3.6.1.4.1.20044.60.8.1.1.1 | Scalarpm10010mptDwlSwBank1Used | read-only | current | SW bank 1 active :This OID indicates the module is working on SW bank 1 <Help> This status indicates if the SW bank 1 is active or standby |
| 1.3.6.1.4.1.20044.60.8.1.1.2 | Scalarpm10010mptDwlSwBank2Used | read-only | current | SW bank 2 active :This OID indicates the module is working on SW bank 2 <Help> This status indicates if the SW bank 2 is active or standby |
| 1.3.6.1.4.1.20044.60.8.1.1.5 | Scalarpm10010mptDwlSwBank1Notempty | read-only | current | SW bank 1 loaded :This OID indicates a software is loaded in SW bank 1 <Help> This status indicates if the SW bank 1 contains SW package |
| 1.3.6.1.4.1.20044.60.8.1.1.6 | Scalarpm10010mptDwlSwBank2Notempty | read-only | current | SW bank 2 loaded :This OID indicates a software is loaded in SW bank 2 <Help> This status indicates if the SW bank 2 contains SW package |
| 1.3.6.1.4.1.20044.60.8.1.2 | Nodepm10010mptDwlgwBanksUsed | |||
| 1.3.6.1.4.1.20044.60.8.1.2.1 | Scalarpm10010mptDwlGwBank1Used | read-only | current | GW bank 1 active :This OID indicates the module is working on GW bank 1 <Help> This status indicates if the GW bank 1 is active or standby |
| 1.3.6.1.4.1.20044.60.8.1.2.2 | Scalarpm10010mptDwlGwBank2Used | read-only | current | GW bank 2 active :This OID indicates the module is working on GW bank 2 |
| 1.3.6.1.4.1.20044.60.8.1.2.3 | Scalarpm10010mptDwlGwBank3Used | read-only | current | GW bank 3 active :This OID indicates the module is working on GW bank 3 <Help> This status indicates if the GW bank 3 is active or standby |
| 1.3.6.1.4.1.20044.60.8.1.2.4 | Scalarpm10010mptDwlGwBank4Used | read-only | current | GW bank 4 active :This OID indicates the module is working on GW bank 4 |
| 1.3.6.1.4.1.20044.60.8.1.2.5 | Scalarpm10010mptDwlGwBank1Notempty | read-only | current | GW bank 1 loaded :This OID indicates a gateware is loaded in GW bank 1 <Help> This status indicates if the GW bank 1 contains GW package |
| 1.3.6.1.4.1.20044.60.8.1.2.6 | Scalarpm10010mptDwlGwBank2Notempty | read-only | current | GW bank 2 loaded :This OID indicates a gateware is loaded in GW bank 2 |
| 1.3.6.1.4.1.20044.60.8.1.2.7 | Scalarpm10010mptDwlGwBank3Notempty | read-only | current | GW bank 3 loaded :This OID indicates a gateware is loaded in GW bank 3 <Help> This status indicates if the GW bank 3 contains GW package |
| 1.3.6.1.4.1.20044.60.8.1.2.8 | Scalarpm10010mptDwlGwBank4Notempty | read-only | current | GW bank 4 loaded :This OID indicates a gateware is loaded in GW bank 4 |
| 1.3.6.1.4.1.20044.60.8.2 | Nodepm10010mptDwlClient | |||
| 1.3.6.1.4.1.20044.60.8.3 | Nodepm10010mptDwlLine | |||
| 1.3.6.1.4.1.20044.60.9 | Nodepm10010mptConfig | |||
| 1.3.6.1.4.1.20044.60.9.1 | Nodepm10010mptCfgAccessCAisCsf | |||
| 1.3.6.1.4.1.20044.60.9.1.1 | Tablepm10010mptCfgClientcaiscsfTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.60.9.1.1.1 | Rowpm10010mptCfgClientcaiscsfEntry | not-accessible | current | Row definition for the accessCAisCsf table |
| 1.3.6.1.4.1.20044.60.9.1.1.1.1 | Columnpm10010mptCfgClientcaiscsfIndex | read-only | current | Index definition for the clientcaiscsf table |
| 1.3.6.1.4.1.20044.60.9.1.1.1.3 | Columnpm10010mptCfgReservePortn | read-write | current | CAIS mode on Client Port :This register enables/disables port laser shutdown on CAIS insertion condition |
| 1.3.6.1.4.1.20044.60.9.2 | Nodepm10010mptCfgStartup | |||
| 1.3.6.1.4.1.20044.60.9.2.1 | Tablepm10010mptCfgClientStartupTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.60.9.2.1.1 | Rowpm10010mptCfgClientStartupEntry | not-accessible | current | Row definition for the startup table |
| 1.3.6.1.4.1.20044.60.9.2.1.1.1 | Columnpm10010mptCfgClientStartupIndex | read-only | current | Index definition for the clientStartup table |
| 1.3.6.1.4.1.20044.60.9.2.1.1.3 | Columnpm10010mptCfgSystConfPortPortn | read-write | current | Default Settings on Client Port :This register configures the default initialisation settings on the port. |
| 1.3.6.1.4.1.20044.60.9.2.1.1.4 | Columnpm10010mptCfgNetConfPortPortn | read-write | current | Default Settings on Client Port :This register configures the default initialisation settings on the port. |
| 1.3.6.1.4.1.20044.60.9.2.1.1.6 | Columnpm10010mptCfgIgnoreTimePortn | read-write | current | Default Settings on Client Port :This register configures the default initialisation settings on the port. |
| 1.3.6.1.4.1.20044.60.9.2.1.1.14 | Columnpm10010mptCfgOptionsPortPortn | read-write | current | Default Options on Client Port :This register configures the default options on the port. |
| 1.3.6.1.4.1.20044.60.9.2.2 | Tablepm10010mptCfgLineStartupTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.60.9.2.2.1 | Rowpm10010mptCfgLineStartupEntry | not-accessible | current | Row definition for the startup table |
| 1.3.6.1.4.1.20044.60.9.2.2.1.1 | Columnpm10010mptCfgLineStartupIndex | read-only | current | Index definition for the lineStartup table |
| 1.3.6.1.4.1.20044.60.9.2.2.1.3 | Columnpm10010mptCfgSystConfLinePortn | read-write | current | Default Settings on Line :This register configures the default initialisation settings on Line |
| 1.3.6.1.4.1.20044.60.9.2.2.1.14 | Columnpm10010mptCfgOptionsLinePortn | read-write | current | Default Options on Line :This register configures the default options on the line |
| 1.3.6.1.4.1.20044.60.9.2.3 | Tablepm10010mptCfgXfpTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.60.9.2.3.1 | Rowpm10010mptCfgXfpEntry | not-accessible | current | Row definition for the startup table |
| 1.3.6.1.4.1.20044.60.9.2.3.1.1 | Columnpm10010mptCfgXfpIndex | read-only | current | Index definition for the xfp table |
| 1.3.6.1.4.1.20044.60.9.2.3.1.3 | Columnpm10010mptCfgSystConfMsaLinePortn | read-write | current | Default settings on MSA :This register configures the default initialisation settings on MSA |
| 1.3.6.1.4.1.20044.60.9.3 | Nodepm10010mptCfgLabels | |||
| 1.3.6.1.4.1.20044.60.9.3.1 | Tablepm10010mptCfgLabelclientTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.60.9.3.1.1 | Rowpm10010mptCfgLabelclientEntry | not-accessible | current | Row definition for the labels table |
| 1.3.6.1.4.1.20044.60.9.3.1.1.1 | Columnpm10010mptCfgLabelclientIndex | read-only | current | Index definition for the labelclient table |
| 1.3.6.1.4.1.20044.60.9.3.1.1.3 | Columnpm10010mptCfgLabelclientPortn | read-write | current | Default settings on the label of the Ports :These registers configures the default initialisation settings of the labels of the ports. |
| 1.3.6.1.4.1.20044.60.9.3.2 | Tablepm10010mptCfgLabellineTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.60.9.3.2.1 | Rowpm10010mptCfgLabellineEntry | not-accessible | current | Row definition for the labels table |
| 1.3.6.1.4.1.20044.60.9.3.2.1.1 | Columnpm10010mptCfgLabellineIndex | read-only | current | Index definition for the labelline table |
| 1.3.6.1.4.1.20044.60.9.3.2.1.3 | Columnpm10010mptCfgLabellinePortn | read-write | current | Default settings on the label of the lines :These registers configures the default initialisation settings of the labels of the lines. |
| 1.3.6.1.4.1.20044.60.9.4 | Nodepm10010mptCfgStartuptlh | |||
| 1.3.6.1.4.1.20044.60.9.4.1 | Tablepm10010mptCfgOtxtlhTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.60.9.4.1.1 | Rowpm10010mptCfgOtxtlhEntry | not-accessible | current | Row definition for the startuptlh table |
| 1.3.6.1.4.1.20044.60.9.4.1.1.1 | Columnpm10010mptCfgOtxtlhIndex | read-only | current | Index definition for the otxtlh table |
| 1.3.6.1.4.1.20044.60.9.4.1.1.6 | Columnpm10010mptCfgLinePwrLaserPortn | read-write | current | Defaut Line output Power :This register configures the start-up output power of the Line tranceiver (Unit = dBm) |
| 1.3.6.1.4.1.20044.60.9.4.1.1.7 | Columnpm10010mptCfgLineFCurrentPortn | read-write | current | Default Line transceiver Tx Channel :This register configures the start-up laser channel of the Line Tx transceiver |
| 1.3.6.1.4.1.20044.60.9.4.1.1.8 | Columnpm10010mptCfgLineGridCurrentPortn | read-write | current | Default Line transceiver Grid :This register configures the start-up laser grid of the Line transceiver |
| 1.3.6.1.4.1.20044.60.9.4.1.1.9 | Columnpm10010mptCfgFPortn | read-write | current | Default Line TRX lowest Freq :This register configures the start-up lowest frequency of the Line transceiver |
| 1.3.6.1.4.1.20044.60.9.4.1.1.10 | Columnpm10010mptCfgRxLineFCurrentPortn | read-write | current | Default Line transceiver Rx Channel :This register configures the start-up laser channel of the Line Rx transceiver |
| 1.3.6.1.4.1.20044.60.9.5 | Nodepm10010mptCfgOther | |||
| 1.3.6.1.4.1.20044.60.9.5.1 | Nodepm10010mpttablemoduleOther | |||
| 1.3.6.1.4.1.20044.60.9.5.1.2 | Scalarpm10010mptCfgmode | read-write | current | Default settings on Module :This register selects the configuration mode of the module |
| 1.3.6.1.4.1.20044.60.9.5.1.3 | Scalarpm10010mptCfgfanLowSpeedThreshold | read-write | current | Default settings on Module :This register selects the speed threshold of the fan's |
| 1.3.6.1.4.1.20044.60.9.5.1.4 | Scalarpm10010mptCfgfanHighSpeedThreshold | read-write | current | Default settings on Module :This register selects the speed threshold of the fan's |
| 1.3.6.1.4.1.20044.60.9.6 | Nodepm10010mptCfgStartuptablefive | |||
| 1.3.6.1.4.1.20044.60.9.6.1 | Tablepm10010mptCfgOtxtlhcapabilitiesTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.60.9.6.1.1 | Rowpm10010mptCfgOtxtlhcapabilitiesEntry | not-accessible | current | Row definition for the startuptablefive table |
| 1.3.6.1.4.1.20044.60.9.6.1.1.1 | Columnpm10010mptCfgOtxtlhcapabilitiesIndex | read-only | current | Index definition for the otxtlhcapabilities table |
| 1.3.6.1.4.1.20044.60.9.6.1.1.3 | Columnpm10010mptCfgComponentTypePortn | read-only | current | Component parameters :This OID defines the component parameters |
| 1.3.6.1.4.1.20044.60.9.6.1.1.4 | Columnpm10010mptCfgMiscellaneousPortn | read-only | current | Miscellaneous default settings :This OID defines the miscellaneous parameters |
| 1.3.6.1.4.1.20044.60.9.6.1.1.5 | Columnpm10010mptCfgFirstChannelPortn | read-only | current | Number of the first channel of the component :This OID defines the first channel number of the PM |
| 1.3.6.1.4.1.20044.60.9.6.1.1.6 | Columnpm10010mptCfgLastChannelPortn | read-only | current | Number of the last channel of the component :This OID defines the last channel number of the PM |
| 1.3.6.1.4.1.20044.60.9.6.1.1.7 | Columnpm10010mptCfgGridPortn | read-only | current | Grid value of the component :This OID defines the grid of the PM |
| 1.3.6.1.4.1.20044.60.9.257 | Scalarpm10010mptCfgWriteConfiguration | read-write | current | Write configuration to module:This OID writes the complete configuration to the module |
| 1.3.6.1.4.1.20044.60.10 | Nodepm10010mpttraps | |||
| 1.3.6.1.4.1.20044.60.10.2 | Scalarpm10010mpttrapPortNumber | read-only | current | Last port which generates a trap |
| 1.3.6.1.4.1.20044.60.10.3 | Scalarpm10010mpttrapLineNumber | read-only | current | Last Line which generates a trap |
| 1.3.6.1.4.1.20044.60.10.4 | Scalarpm10010mpttrapBoardNumber | read-only | current | Last module which generates a trap |
| 1.3.6.1.4.1.20044.60.10.30 | Notificationpm10010mptLineTrapNotUrgentGoesOn | current | Not urgent Line default is activated | |
| 1.3.6.1.4.1.20044.60.10.31 | Notificationpm10010mptLineTrapNotUrgentGoesOff | current | Not urgent Line default disappeared | |
| 1.3.6.1.4.1.20044.60.10.32 | Notificationpm10010mptLineTrapUrgentGoesOn | current | Urgent Line default is activated | |
| 1.3.6.1.4.1.20044.60.10.33 | Notificationpm10010mptLineTrapUrgentGoesOff | current | Urgent Line default disappeared | |
| 1.3.6.1.4.1.20044.60.10.34 | Notificationpm10010mptLineTrapCritGoesOn | current | Critical Line default is activated | |
| 1.3.6.1.4.1.20044.60.10.35 | Notificationpm10010mptLineTrapCritGoesOff | current | Critical Line default disappeared | |
| 1.3.6.1.4.1.20044.60.10.40 | Notificationpm10010mptClientTrapNotUrgentGoesOn | current | Not urgent client default is activated | |
| 1.3.6.1.4.1.20044.60.10.41 | Notificationpm10010mptClientTrapNotUrgentGoesOff | current | Not urgent client default disappeared | |
| 1.3.6.1.4.1.20044.60.10.42 | Notificationpm10010mptClientTrapUrgentGoesOn | current | Urgent client default is activated | |
| 1.3.6.1.4.1.20044.60.10.43 | Notificationpm10010mptClientTrapUrgentGoesOff | current | Urgent client default disappeared | |
| 1.3.6.1.4.1.20044.60.10.44 | Notificationpm10010mptClientTrapCritGoesOn | current | Critical client default is activated | |
| 1.3.6.1.4.1.20044.60.10.45 | Notificationpm10010mptClientTrapCritGoesOff | current | Critical client default disappeared | |
| 1.3.6.1.4.1.20044.60.10.50 | Notificationpm10010mptPowerTrapUrgentGoesOn | current | Urgent power supply default is activated | |
| 1.3.6.1.4.1.20044.60.10.51 | Notificationpm10010mptPowerTrapUrgentGoesOff | current | Urgent power supply default disappeared | |
| 1.3.6.1.4.1.20044.60.11 | Nodepm10010mptMonitoring | |||
| 1.3.6.1.4.1.20044.60.11.1 | Nodepm10010mptMonOther | |||
| 1.3.6.1.4.1.20044.60.11.1.3 | Nodepm10010mptMonRmon | |||
| 1.3.6.1.4.1.20044.60.11.2 | Nodepm10010mptMonClient | |||
| 1.3.6.1.4.1.20044.60.11.2.4 | Nodepm10010mptMonClientRmonCounter | |||
| 1.3.6.1.4.1.20044.60.11.2.4.16 | Tablepm10010mptMonupRmonBytesCounterClientInputTable | not-accessible | current | List of pm10010mptMonupRmonBytesCounterClientInput Article |
| 1.3.6.1.4.1.20044.60.11.2.4.16.1 | Rowpm10010mptMonupRmonBytesCounterClientInputEntry | not-accessible | current | Row definition for the pm10010mptMonupRmonBytesCounterClientInput table |
| 1.3.6.1.4.1.20044.60.11.2.4.16.1.1 | Columnpm10010mptMonupRmonBytesCounterClientInputIndex | read-only | current | Index definition for the pm10010mptMonupRmonBytesCounterClientInput table |
| 1.3.6.1.4.1.20044.60.11.2.4.16.1.2 | Columnpm10010mptMonupRmonBytesCounterClientInputValuePortn | read-only | current | Client Input Bytes :This counter is increased each time a data byte is received on the client port <Help> This counter gives the number of bytes received on th… |
| 1.3.6.1.4.1.20044.60.11.2.4.16.1.3 | Columnpm10010mptMonupRmonBytesCounterClientInputErrorPortn | read-only | current | Bytes Counter Error :This OID when set indicates the Bytes counter value is invalid on client port |
| 1.3.6.1.4.1.20044.60.11.2.4.16.1.4 | Columnpm10010mptMonupRmonBytesCounterClientInputOverloadPortn | read-only | current | Bytes Counter Overload :This OID when set indicates a Bytes counter overload on client port |
| 1.3.6.1.4.1.20044.60.11.2.4.32 | Tablepm10010mptMonupRmonCrcErrorsCounterClientInputTable | not-accessible | current | List of pm10010mptMonupRmonCrcErrorsCounterClientInput Article |
| 1.3.6.1.4.1.20044.60.11.2.4.32.1 | Rowpm10010mptMonupRmonCrcErrorsCounterClientInputEntry | not-accessible | current | Row definition for the pm10010mptMonupRmonCrcErrorsCounterClientInput table |
| 1.3.6.1.4.1.20044.60.11.2.4.32.1.1 | Columnpm10010mptMonupRmonCrcErrorsCounterClientInputIndex | read-only | current | Index definition for the pm10010mptMonupRmonCrcErrorsCounterClientInput table |
| 1.3.6.1.4.1.20044.60.11.2.4.32.1.2 | Columnpm10010mptMonupRmonCrcErrorsCounterClientInputValuePortn | read-only | current | Client Input B1/CRC Errors :This counter is increased each time a B1/FCS error is detected on the client port <Help> This counter gives the number of B1/FCS Er… |
| 1.3.6.1.4.1.20044.60.11.2.4.32.1.3 | Columnpm10010mptMonupRmonCrcErrorsCounterClientInputErrorPortn | read-only | current | B1/FCS Errors Counter Error :This OID when set indicates the B1/FCS Errors counter value is invalid on client port |
| 1.3.6.1.4.1.20044.60.11.2.4.32.1.4 | Columnpm10010mptMonupRmonCrcErrorsCounterClientInputOverloadPortn | read-only | current | B1/FCS Errors Counter Overload :This OID when set indicates a B1/FCS Errors counter overload on client port |
| 1.3.6.1.4.1.20044.60.11.2.4.48 | Tablepm10010mptMonupRmonPacketsCounterClientInputTable | not-accessible | current | List of pm10010mptMonupRmonPacketsCounterClientInput Article |
| 1.3.6.1.4.1.20044.60.11.2.4.48.1 | Rowpm10010mptMonupRmonPacketsCounterClientInputEntry | not-accessible | current | Row definition for the pm10010mptMonupRmonPacketsCounterClientInput table |
| 1.3.6.1.4.1.20044.60.11.2.4.48.1.1 | Columnpm10010mptMonupRmonPacketsCounterClientInputIndex | read-only | current | Index definition for the pm10010mptMonupRmonPacketsCounterClientInput table |
| 1.3.6.1.4.1.20044.60.11.2.4.48.1.2 | Columnpm10010mptMonupRmonPacketsCounterClientInputValuePortn | read-only | current | Client Input Packets :This counter is increased each time a packet is received on the client port <Help> This counter gives the number of packets received on t… |
| 1.3.6.1.4.1.20044.60.11.2.4.48.1.3 | Columnpm10010mptMonupRmonPacketsCounterClientInputErrorPortn | read-only | current | Packets Counter Error :This OID when set indicates the Packets counter value is invalid on client port |
| 1.3.6.1.4.1.20044.60.11.2.4.48.1.4 | Columnpm10010mptMonupRmonPacketsCounterClientInputOverloadPortn | read-only | current | Packets Counter Overload :This OID when set indicates a Packets counter overload on client port |
| 1.3.6.1.4.1.20044.60.11.2.4.64 | Tablepm10010mptMonupRmonBroadcastCounterClientInputTable | not-accessible | current | List of pm10010mptMonupRmonBroadcastCounterClientInput Article |
| 1.3.6.1.4.1.20044.60.11.2.4.64.1 | Rowpm10010mptMonupRmonBroadcastCounterClientInputEntry | not-accessible | current | Row definition for the pm10010mptMonupRmonBroadcastCounterClientInput table |
| 1.3.6.1.4.1.20044.60.11.2.4.64.1.1 | Columnpm10010mptMonupRmonBroadcastCounterClientInputIndex | read-only | current | Index definition for the pm10010mptMonupRmonBroadcastCounterClientInput table |
| 1.3.6.1.4.1.20044.60.11.2.4.64.1.2 | Columnpm10010mptMonupRmonBroadcastCounterClientInputValuePortn | read-only | current | Client Input Broadcast Packets :This counter is increased each time a broadcast packet is received on the client port <Help> This counter gives the number of B… |
| 1.3.6.1.4.1.20044.60.11.2.4.64.1.3 | Columnpm10010mptMonupRmonBroadcastCounterClientInputErrorPortn | read-only | current | Broadcast Counter Error :This OID when set indicates the Broadcast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.60.11.2.4.64.1.4 | Columnpm10010mptMonupRmonBroadcastCounterClientInputOverloadPortn | read-only | current | Broadcast Counter Overload :This OID when set indicates a Broadcast counter overload on client port |
| 1.3.6.1.4.1.20044.60.11.2.4.80 | Tablepm10010mptMonupRmonMulticastCounterClientInputTable | not-accessible | current | List of pm10010mptMonupRmonMulticastCounterClientInput Article |
| 1.3.6.1.4.1.20044.60.11.2.4.80.1 | Rowpm10010mptMonupRmonMulticastCounterClientInputEntry | not-accessible | current | Row definition for the pm10010mptMonupRmonMulticastCounterClientInput table |
| 1.3.6.1.4.1.20044.60.11.2.4.80.1.1 | Columnpm10010mptMonupRmonMulticastCounterClientInputIndex | read-only | current | Index definition for the pm10010mptMonupRmonMulticastCounterClientInput table |
| 1.3.6.1.4.1.20044.60.11.2.4.80.1.2 | Columnpm10010mptMonupRmonMulticastCounterClientInputValuePortn | read-only | current | Client Input Multicast Packets :This counter is increased each time a Multicast packet is received on the client port <Help> This counter gives the number of M… |
| 1.3.6.1.4.1.20044.60.11.2.4.80.1.3 | Columnpm10010mptMonupRmonMulticastCounterClientInputErrorPortn | read-only | current | Multicast Counter Error :This OID when set indicates the Multicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.60.11.2.4.80.1.4 | Columnpm10010mptMonupRmonMulticastCounterClientInputOverloadPortn | read-only | current | Multicast Counter Overload :This OID when set indicates a Multicast counter overload on client port |
| 1.3.6.1.4.1.20044.60.11.2.4.96 | Tablepm10010mptMonupRmonPauseFrameCounterClientInputTable | not-accessible | current | List of pm10010mptMonupRmonPauseFrameCounterClientInput Article |
| 1.3.6.1.4.1.20044.60.11.2.4.96.1 | Rowpm10010mptMonupRmonPauseFrameCounterClientInputEntry | not-accessible | current | Row definition for the pm10010mptMonupRmonPauseFrameCounterClientInput table |
| 1.3.6.1.4.1.20044.60.11.2.4.96.1.1 | Columnpm10010mptMonupRmonPauseFrameCounterClientInputIndex | read-only | current | Index definition for the pm10010mptMonupRmonPauseFrameCounterClientInput table |
| 1.3.6.1.4.1.20044.60.11.2.4.96.1.2 | Columnpm10010mptMonupRmonPauseFrameCounterClientInputValuePortn | read-only | current | Client Input Pause Frames :This counter is increased each time a Pause frame is received on the client port <Help> This counter gives the number of Pause frame… |
| 1.3.6.1.4.1.20044.60.11.2.4.96.1.3 | Columnpm10010mptMonupRmonPauseFrameCounterClientInputErrorPortn | read-only | current | Pause Counter Error :This OID when set indicates the Pause counter value is invalid on client port |
| 1.3.6.1.4.1.20044.60.11.2.4.96.1.4 | Columnpm10010mptMonupRmonPauseFrameCounterClientInputOverloadPortn | read-only | current | Pause Counter Overload :This OID when set indicates a Pause counter overload on client port |
| 1.3.6.1.4.1.20044.60.11.2.4.160 | Tablepm10010mptMonupRmonUnicastCounterClientInputTable | not-accessible | current | List of pm10010mptMonupRmonUnicastCounterClientInput Article |
| 1.3.6.1.4.1.20044.60.11.2.4.160.1 | Rowpm10010mptMonupRmonUnicastCounterClientInputEntry | not-accessible | current | Row definition for the pm10010mptMonupRmonUnicastCounterClientInput table |
| 1.3.6.1.4.1.20044.60.11.2.4.160.1.1 | Columnpm10010mptMonupRmonUnicastCounterClientInputIndex | read-only | current | Index definition for the pm10010mptMonupRmonUnicastCounterClientInput table |
| 1.3.6.1.4.1.20044.60.11.2.4.160.1.2 | Columnpm10010mptMonupRmonUnicastCounterClientInputValuePortn | read-only | current | Client Input Unicast Packets :This counter is increased each time a Unicast packet is received on the client port <Help> This counter gives the number of Unica… |
| 1.3.6.1.4.1.20044.60.11.2.4.160.1.3 | Columnpm10010mptMonupRmonUnicastCounterClientInputErrorPortn | read-only | current | Unicast Counter Error :This OID when set indicates the Unicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.60.11.2.4.160.1.4 | Columnpm10010mptMonupRmonUnicastCounterClientInputOverloadPortn | read-only | current | Unicast Counter Overload :This OID when set indicates a Unicast counter overload on client port |
| 1.3.6.1.4.1.20044.60.11.2.4.176 | Tablepm10010mptMonupRmonNonunicastCounterClientInputTable | not-accessible | current | List of pm10010mptMonupRmonNonunicastCounterClientInput Article |
| 1.3.6.1.4.1.20044.60.11.2.4.176.1 | Rowpm10010mptMonupRmonNonunicastCounterClientInputEntry | not-accessible | current | Row definition for the pm10010mptMonupRmonNonunicastCounterClientInput table |
| 1.3.6.1.4.1.20044.60.11.2.4.176.1.1 | Columnpm10010mptMonupRmonNonunicastCounterClientInputIndex | read-only | current | Index definition for the pm10010mptMonupRmonNonunicastCounterClientInput table |
| 1.3.6.1.4.1.20044.60.11.2.4.176.1.2 | Columnpm10010mptMonupRmonNonunicastCounterClientInputValuePortn | read-only | current | Client Input Non Unicast Packets :This counter is increased each time a Non-Unicast packet is received on the client port <Help> This counter gives the number … |
| 1.3.6.1.4.1.20044.60.11.2.4.176.1.3 | Columnpm10010mptMonupRmonNonunicastCounterClientInputErrorPortn | read-only | current | Non Unicast Counter Error :This OID when set indicates the Non-Unicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.60.11.2.4.176.1.4 | Columnpm10010mptMonupRmonNonunicastCounterClientInputOverloadPortn | read-only | current | Non Unicast Counter Overload :This OID when set indicates a Non-Unicast counter overload on client port |
| 1.3.6.1.4.1.20044.60.11.2.4.208 | Tablepm10010mptMondownRmonBytesCounterClientOutputTable | not-accessible | current | List of pm10010mptMondownRmonBytesCounterClientOutput Article |
| 1.3.6.1.4.1.20044.60.11.2.4.208.1 | Rowpm10010mptMondownRmonBytesCounterClientOutputEntry | not-accessible | current | Row definition for the pm10010mptMondownRmonBytesCounterClientOutput table |
| 1.3.6.1.4.1.20044.60.11.2.4.208.1.1 | Columnpm10010mptMondownRmonBytesCounterClientOutputIndex | read-only | current | Index definition for the pm10010mptMondownRmonBytesCounterClientOutput table |
| 1.3.6.1.4.1.20044.60.11.2.4.208.1.2 | Columnpm10010mptMondownRmonBytesCounterClientOutputValuePortn | read-only | current | Client Output Bytes :This counter is increased each time a data byte is transmitted on the client port <Help> This counter gives the number of bytes transmitte… |
| 1.3.6.1.4.1.20044.60.11.2.4.208.1.3 | Columnpm10010mptMondownRmonBytesCounterClientOutputErrorPortn | read-only | current | Bytes Counter Error :This OID when set indicates the Bytes counter value is invalid on client port |
| 1.3.6.1.4.1.20044.60.11.2.4.208.1.4 | Columnpm10010mptMondownRmonBytesCounterClientOutputOverloadPortn | read-only | current | Bytes Counter Overload :This OID when set indicates a Bytes counter overload on client port |
| 1.3.6.1.4.1.20044.60.11.2.4.224 | Tablepm10010mptMondownRmonCrcErrorsCounterClientOutputTable | not-accessible | current | List of pm10010mptMondownRmonCrcErrorsCounterClientOutput Article |
| 1.3.6.1.4.1.20044.60.11.2.4.224.1 | Rowpm10010mptMondownRmonCrcErrorsCounterClientOutputEntry | not-accessible | current | Row definition for the pm10010mptMondownRmonCrcErrorsCounterClientOutput table |
| 1.3.6.1.4.1.20044.60.11.2.4.224.1.1 | Columnpm10010mptMondownRmonCrcErrorsCounterClientOutputIndex | read-only | current | Index definition for the pm10010mptMondownRmonCrcErrorsCounterClientOutput table |
| 1.3.6.1.4.1.20044.60.11.2.4.224.1.2 | Columnpm10010mptMondownRmonCrcErrorsCounterClientOutputValuePortn | read-only | current | Client Output B1/CRC Errors :This counter is increased each time a B1/FCS error is detected on the transmit client port <Help> This counter gives the number of… |
| 1.3.6.1.4.1.20044.60.11.2.4.224.1.3 | Columnpm10010mptMondownRmonCrcErrorsCounterClientOutputErrorPortn | read-only | current | Output B1/CRC Errors Counter Error :This OID when set indicates the B1/FCS Errors counter value is invalid on client port |
| 1.3.6.1.4.1.20044.60.11.2.4.224.1.4 | Columnpm10010mptMondownRmonCrcErrorsCounterClientOutputOverloadPortn | read-only | current | Output B1/CRC Errors Counter Overload :This OID when set indicates a B1/FCS Errors counter overload on client port |
| 1.3.6.1.4.1.20044.60.11.2.4.240 | Tablepm10010mptMondownRmonPacketsCounterClientOutputTable | not-accessible | current | List of pm10010mptMondownRmonPacketsCounterClientOutput Article |
| 1.3.6.1.4.1.20044.60.11.2.4.240.1 | Rowpm10010mptMondownRmonPacketsCounterClientOutputEntry | not-accessible | current | Row definition for the pm10010mptMondownRmonPacketsCounterClientOutput table |
| 1.3.6.1.4.1.20044.60.11.2.4.240.1.1 | Columnpm10010mptMondownRmonPacketsCounterClientOutputIndex | read-only | current | Index definition for the pm10010mptMondownRmonPacketsCounterClientOutput table |
| 1.3.6.1.4.1.20044.60.11.2.4.240.1.2 | Columnpm10010mptMondownRmonPacketsCounterClientOutputValuePortn | read-only | current | Client Output Packets :This counter is increased each time a packet is transmitted on the client port <Help> This counter gives the number of packets transmitt… |
| 1.3.6.1.4.1.20044.60.11.2.4.240.1.3 | Columnpm10010mptMondownRmonPacketsCounterClientOutputErrorPortn | read-only | current | Packets Counter Error :This OID when set indicates the Packets counter value is invalid on client port |
| 1.3.6.1.4.1.20044.60.11.2.4.240.1.4 | Columnpm10010mptMondownRmonPacketsCounterClientOutputOverloadPortn | read-only | current | Packets Counter Overload :This OID when set indicates a Packets counter overload on client port |
| 1.3.6.1.4.1.20044.60.11.2.4.256 | Tablepm10010mptMondownRmonBroadcastCounterClientOutputTable | not-accessible | current | List of pm10010mptMondownRmonBroadcastCounterClientOutput Article |
| 1.3.6.1.4.1.20044.60.11.2.4.256.1 | Rowpm10010mptMondownRmonBroadcastCounterClientOutputEntry | not-accessible | current | Row definition for the pm10010mptMondownRmonBroadcastCounterClientOutput table |
| 1.3.6.1.4.1.20044.60.11.2.4.256.1.1 | Columnpm10010mptMondownRmonBroadcastCounterClientOutputIndex | read-only | current | Index definition for the pm10010mptMondownRmonBroadcastCounterClientOutput table |
| 1.3.6.1.4.1.20044.60.11.2.4.256.1.2 | Columnpm10010mptMondownRmonBroadcastCounterClientOutputValuePortn | read-only | current | Client Output Broadcast Packets :This counter is increased each time a broadcast packet is transmitted on the client port <Help> This counter gives the number … |
| 1.3.6.1.4.1.20044.60.11.2.4.256.1.3 | Columnpm10010mptMondownRmonBroadcastCounterClientOutputErrorPortn | read-only | current | Broadcast Counter Error :This OID when set indicates the Broadcast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.60.11.2.4.256.1.4 | Columnpm10010mptMondownRmonBroadcastCounterClientOutputOverloadPortn | read-only | current | Broadcast Counter Overload :This OID when set indicates a Broadcast counter overload on client port |
| 1.3.6.1.4.1.20044.60.11.2.4.272 | Tablepm10010mptMondownRmonMulticastCounterClientOutputTable | not-accessible | current | List of pm10010mptMondownRmonMulticastCounterClientOutput Article |
| 1.3.6.1.4.1.20044.60.11.2.4.272.1 | Rowpm10010mptMondownRmonMulticastCounterClientOutputEntry | not-accessible | current | Row definition for the pm10010mptMondownRmonMulticastCounterClientOutput table |
| 1.3.6.1.4.1.20044.60.11.2.4.272.1.1 | Columnpm10010mptMondownRmonMulticastCounterClientOutputIndex | read-only | current | Index definition for the pm10010mptMondownRmonMulticastCounterClientOutput table |
| 1.3.6.1.4.1.20044.60.11.2.4.272.1.2 | Columnpm10010mptMondownRmonMulticastCounterClientOutputValuePortn | read-only | current | Client Output Multicast Packets :This counter is increased each time a Multicast packet is transmitted on the client port <Help> This counter gives the number … |
| 1.3.6.1.4.1.20044.60.11.2.4.272.1.3 | Columnpm10010mptMondownRmonMulticastCounterClientOutputErrorPortn | read-only | current | Multicast Counter Error :This OID when set indicates the Multicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.60.11.2.4.272.1.4 | Columnpm10010mptMondownRmonMulticastCounterClientOutputOverloadPortn | read-only | current | Multicast Counter Overload :This OID when set indicates a Multicast counter overload on client port |
| 1.3.6.1.4.1.20044.60.11.2.4.288 | Tablepm10010mptMondownRmonPauseFrameCounterClientOutputTable | not-accessible | current | List of pm10010mptMondownRmonPauseFrameCounterClientOutput Article |
| 1.3.6.1.4.1.20044.60.11.2.4.288.1 | Rowpm10010mptMondownRmonPauseFrameCounterClientOutputEntry | not-accessible | current | Row definition for the pm10010mptMondownRmonPauseFrameCounterClientOutput table |
| 1.3.6.1.4.1.20044.60.11.2.4.288.1.1 | Columnpm10010mptMondownRmonPauseFrameCounterClientOutputIndex | read-only | current | Index definition for the pm10010mptMondownRmonPauseFrameCounterClientOutput table |
| 1.3.6.1.4.1.20044.60.11.2.4.288.1.2 | Columnpm10010mptMondownRmonPauseFrameCounterClientOutputValuePortn | read-only | current | Client Output Pause Frames :This counter is increased each time a Pause frame is transmitted on the client port <Help> This counter gives the number of Pause f… |
| 1.3.6.1.4.1.20044.60.11.2.4.288.1.3 | Columnpm10010mptMondownRmonPauseFrameCounterClientOutputErrorPortn | read-only | current | Pause Counter Error :This OID when set indicates the Pause counter value is invalid on client port |
| 1.3.6.1.4.1.20044.60.11.2.4.288.1.4 | Columnpm10010mptMondownRmonPauseFrameCounterClientOutputOverloadPortn | read-only | current | Pause Counter Overload :This OID when set indicates a Pause counter overload on client port |
| 1.3.6.1.4.1.20044.60.11.2.4.352 | Tablepm10010mptMondownRmonUnicastCounterClientOutputTable | not-accessible | current | List of pm10010mptMondownRmonUnicastCounterClientOutput Article |
| 1.3.6.1.4.1.20044.60.11.2.4.352.1 | Rowpm10010mptMondownRmonUnicastCounterClientOutputEntry | not-accessible | current | Row definition for the pm10010mptMondownRmonUnicastCounterClientOutput table |
| 1.3.6.1.4.1.20044.60.11.2.4.352.1.1 | Columnpm10010mptMondownRmonUnicastCounterClientOutputIndex | read-only | current | Index definition for the pm10010mptMondownRmonUnicastCounterClientOutput table |
| 1.3.6.1.4.1.20044.60.11.2.4.352.1.2 | Columnpm10010mptMondownRmonUnicastCounterClientOutputValuePortn | read-only | current | Client Output Unicast Packets :This counter is increased each time a Unicast packet is transmitted on the client port <Help> This counter gives the number of U… |
| 1.3.6.1.4.1.20044.60.11.2.4.352.1.3 | Columnpm10010mptMondownRmonUnicastCounterClientOutputErrorPortn | read-only | current | Unicast Counter Error :This OID when set indicates the Unicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.60.11.2.4.352.1.4 | Columnpm10010mptMondownRmonUnicastCounterClientOutputOverloadPortn | read-only | current | Unicast Counter Overload :This OID when set indicates a Unicast counter overload on client port |
| 1.3.6.1.4.1.20044.60.11.2.4.368 | Tablepm10010mptMondownRmonNonunicastCounterClientOutputTable | not-accessible | current | List of pm10010mptMondownRmonNonunicastCounterClientOutput Article |
| 1.3.6.1.4.1.20044.60.11.2.4.368.1 | Rowpm10010mptMondownRmonNonunicastCounterClientOutputEntry | not-accessible | current | Row definition for the pm10010mptMondownRmonNonunicastCounterClientOutput table |
| 1.3.6.1.4.1.20044.60.11.2.4.368.1.1 | Columnpm10010mptMondownRmonNonunicastCounterClientOutputIndex | read-only | current | Index definition for the pm10010mptMondownRmonNonunicastCounterClientOutput table |
| 1.3.6.1.4.1.20044.60.11.2.4.368.1.2 | Columnpm10010mptMondownRmonNonunicastCounterClientOutputValuePortn | read-only | current | Client Output Non Unicast Packets :This counter is increased each time a Non-Unicast packet is transmitted on the client port <Help> This counter gives the num… |
| 1.3.6.1.4.1.20044.60.11.2.4.368.1.3 | Columnpm10010mptMondownRmonNonunicastCounterClientOutputErrorPortn | read-only | current | Non Unicast Counter Error :This OID when set indicates the Non-Unicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.60.11.2.4.368.1.4 | Columnpm10010mptMondownRmonNonunicastCounterClientOutputOverloadPortn | read-only | current | Non Unicast Counter Overload :This OID when set indicates a Non-Unicast counter overload on client port |
| 1.3.6.1.4.1.20044.60.11.5 | Nodepm10010mptMonPerfOther | |||
| 1.3.6.1.4.1.20044.60.11.5.1 | Nodepm10010mptMonPerfSync | |||
| 1.3.6.1.4.1.20044.60.11.5.1.257 | Scalarpm10010mptPerfEnable | read-write | current | Perf. Mon. Enable :This OID enables the Performance Monitoring application |
| 1.3.6.1.4.1.20044.60.11.5.1.259 | Scalarpm10010mptPerf15minSync | read-write | current | Perf. Mon. 15-min sync. :This OID must be used in external synchronisation mode only to send a 15-min synchronisation command |
| 1.3.6.1.4.1.20044.60.11.5.1.260 | Scalarpm10010mptPerf24hSync | read-write | current | Perf. Mon. 24-hours sync. :This OID must be used in external synchronisation mode only to send a 24-hours synchronisation command |
| 1.3.6.1.4.1.20044.60.11.5.2 | Nodepm10010mptMonPerfTimeStamp | |||
| 1.3.6.1.4.1.20044.60.11.5.2.1 | Scalarpm10010mptPerf15MinShort | read-write | current | 15-min period is short :This OID indicates that the 15-min period lasts less than 890 seconds |
| 1.3.6.1.4.1.20044.60.11.5.2.2 | Scalarpm10010mptPerf15MinLong | read-write | current | 15-min period is long :This OID indicates that the 15-min period lasts more than 910 seconds |
| 1.3.6.1.4.1.20044.60.11.5.2.5 | Scalarpm10010mptPerf24HoursShort | read-write | current | 24-hours period is short :This OID indicates that 24-hours period lasts less than 86390 seconds |
| 1.3.6.1.4.1.20044.60.11.5.2.6 | Scalarpm10010mptPerf24HoursLong | read-write | current | 24-hours period is long :This OID indicates that 24-hours period lasts more than 86410 seconds |
| 1.3.6.1.4.1.20044.60.11.5.2.7 | Scalarpm10010mptPerfCurrent15MinElapsedTime | read-write | current | Current 15min period Elapsed Time :This OID gives the number of seconds elapsed in the current 15-minutes period |
| 1.3.6.1.4.1.20044.60.11.5.2.8 | Scalarpm10010mptPerfCurrent24HoursElapsedTime | read-write | current | Current 24hours period Elapsed Time :This OID gives the number of seconds elapsed in the current 24-hours period |
| 1.3.6.1.4.1.20044.60.11.6 | Nodepm10010mptMonPerfClient | |||
| 1.3.6.1.4.1.20044.60.11.6.16 | Tablepm10010mptPerfTelecomInputClientCurrent15StatTable | not-accessible | current | List of pm10010mptPerfTelecomInputClientCurrent15Stat Article |
| 1.3.6.1.4.1.20044.60.11.6.16.1 | Rowpm10010mptPerfTelecomInputClientCurrent15StatEntry | not-accessible | current | Row definition for the pm10010mptPerfTelecomInputClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.60.11.6.16.1.1 | Columnpm10010mptPerfTelecomInputClientCurrent15StatIndex | read-only | current | Index definition for the pm10010mptPerfTelecomInputClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.60.11.6.16.1.2 | Columnpm10010mptPerfTelecomInputClientCurrent15StatInvCvPortn | read-only | current | Current 15-min EBC counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.60.11.6.16.1.3 | Columnpm10010mptPerfTelecomInputClientCurrent15StatCvValuePortn | read-only | current | Current 15-min EBC counter :This OID gives the current 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.60.11.6.16.1.4 | Columnpm10010mptPerfTelecomInputClientCurrent15StatInvEsPortn | read-only | current | Current 15-min ES counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.60.11.6.16.1.5 | Columnpm10010mptPerfTelecomInputClientCurrent15StatEsValuePortn | read-only | current | Current 15-min ES counter :This OID gives the current 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.60.11.6.16.1.6 | Columnpm10010mptPerfTelecomInputClientCurrent15StatInvSesPortn | read-only | current | Current 15-min SES counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.60.11.6.16.1.7 | Columnpm10010mptPerfTelecomInputClientCurrent15StatSesValuePortn | read-only | current | Current 15-min SES counter :This OID gives the current 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.60.11.6.16.1.8 | Columnpm10010mptPerfTelecomInputClientCurrent15StatInvSefsPortn | read-only | current | Current 15-min SEFS counter inv. :This OID indicates that the current 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.60.11.6.16.1.9 | Columnpm10010mptPerfTelecomInputClientCurrent15StatSefsValuePortn | read-only | current | Current 15-min SEFS counter :This OID gives the current 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.60.11.6.16.1.10 | Columnpm10010mptPerfTelecomInputClientCurrent15StatInvUasPortn | read-only | current | Current 15-min UAS counter inv. :This OID indicates that the current 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.60.11.6.16.1.11 | Columnpm10010mptPerfTelecomInputClientCurrent15StatUasValuePortn | read-only | current | Current 15-min UAS counter :This OID gives the current 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.60.11.6.32 | Tablepm10010mptPerfTelecomInputClientPast15StatHistoryPort1Table | not-accessible | current | List of pm10010mptPerfTelecomInputClientPast15StatHistory Article |
| 1.3.6.1.4.1.20044.60.11.6.32.1 | Rowpm10010mptPerfTelecomInputClientPast15StatHistoryPort1Entry | not-accessible | current | Row definition for the pm10010mptPerfTelecomInputClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.60.11.6.32.1.1 | Columnpm10010mptPerfTelecomInputClientPast15StatHistoryPort1Index | read-only | current | Index definition for the pm10010mptPerfTelecomInputClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.60.11.6.32.1.2 | Columnpm10010mptPerfTelecomInputClientPast15StatHistoryInvCvPort1 | read-only | current | Previous 15-min EBC counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.60.11.6.32.1.3 | Columnpm10010mptPerfTelecomInputClientPast15StatHistoryCvValuePort1 | read-only | current | Previous 15-min EBC counter :This OID gives the previous 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.60.11.6.32.1.4 | Columnpm10010mptPerfTelecomInputClientPast15StatHistoryInvEsPort1 | read-only | current | Previous 15-min ES counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.60.11.6.32.1.5 | Columnpm10010mptPerfTelecomInputClientPast15StatHistoryEsValuePort1 | read-only | current | Previous 15-min ES counter :This OID gives the previous 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.60.11.6.32.1.6 | Columnpm10010mptPerfTelecomInputClientPast15StatHistoryInvSesPort1 | read-only | current | Previous 15-min SES counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.60.11.6.32.1.7 | Columnpm10010mptPerfTelecomInputClientPast15StatHistorySesValuePort1 | read-only | current | Previous 15-min SES counter :This OID gives the previous 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.60.11.6.32.1.8 | Columnpm10010mptPerfTelecomInputClientPast15StatHistoryInvSefsPort1 | read-only | current | Previous 15-min SEFS counter inv. :This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.60.11.6.32.1.9 | Columnpm10010mptPerfTelecomInputClientPast15StatHistorySefsValuePort1 | read-only | current | Previous 15-min SEFS counter :This OID gives the previous 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.60.11.6.32.1.10 | Columnpm10010mptPerfTelecomInputClientPast15StatHistoryInvUasPort1 | read-only | current | Previous 15-min UAS counter inv. :This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.60.11.6.32.1.11 | Columnpm10010mptPerfTelecomInputClientPast15StatHistoryUasValuePort1 | read-only | current | Previous 15-min UAS counter :This OID gives the previous 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.60.11.6.48 | Tablepm10010mptPerfTelecomInputClientCurrent24StatTable | not-accessible | current | List of pm10010mptPerfTelecomInputClientCurrent24Stat Article |
| 1.3.6.1.4.1.20044.60.11.6.48.1 | Rowpm10010mptPerfTelecomInputClientCurrent24StatEntry | not-accessible | current | Row definition for the pm10010mptPerfTelecomInputClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.60.11.6.48.1.1 | Columnpm10010mptPerfTelecomInputClientCurrent24StatIndex | read-only | current | Index definition for the pm10010mptPerfTelecomInputClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.60.11.6.48.1.2 | Columnpm10010mptPerfTelecomInputClientCurrent24StatInvCvPortn | read-only | current | Current 24-hours EBC counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.60.11.6.48.1.3 | Columnpm10010mptPerfTelecomInputClientCurrent24StatCvValuePortn | read-only | current | Current 24-hours EBC counter :This OID gives the current 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.60.11.6.48.1.4 | Columnpm10010mptPerfTelecomInputClientCurrent24StatInvEsPortn | read-only | current | Current 24-hours ES counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.60.11.6.48.1.5 | Columnpm10010mptPerfTelecomInputClientCurrent24StatEsValuePortn | read-only | current | Current 24-hours ES counter :This OID gives the current 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.60.11.6.48.1.6 | Columnpm10010mptPerfTelecomInputClientCurrent24StatInvSesPortn | read-only | current | Current 24-hours SES counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.60.11.6.48.1.7 | Columnpm10010mptPerfTelecomInputClientCurrent24StatSesValuePortn | read-only | current | Current 24-hours SES counter :This OID gives the current 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.60.11.6.48.1.8 | Columnpm10010mptPerfTelecomInputClientCurrent24StatInvSefsPortn | read-only | current | Current 24-hours SEFS counter inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.60.11.6.48.1.9 | Columnpm10010mptPerfTelecomInputClientCurrent24StatSefsValuePortn | read-only | current | Current 24-hours SEFS counter :This OID gives the current 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.60.11.6.48.1.10 | Columnpm10010mptPerfTelecomInputClientCurrent24StatInvUasPortn | read-only | current | Current 24-hours UAS counter inv. :This OID indicates that the current 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.60.11.6.48.1.11 | Columnpm10010mptPerfTelecomInputClientCurrent24StatUasValuePortn | read-only | current | Current 24-hours UAS counter :This OID gives the current 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.60.11.6.64 | Tablepm10010mptPerfTelecomInputClientPast24StatHistoryPort1Table | not-accessible | current | List of pm10010mptPerfTelecomInputClientPast24StatHistory Article |
| 1.3.6.1.4.1.20044.60.11.6.64.1 | Rowpm10010mptPerfTelecomInputClientPast24StatHistoryPort1Entry | not-accessible | current | Row definition for the pm10010mptPerfTelecomInputClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.60.11.6.64.1.1 | Columnpm10010mptPerfTelecomInputClientPast24StatHistoryPort1Index | read-only | current | Index definition for the pm10010mptPerfTelecomInputClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.60.11.6.64.1.2 | Columnpm10010mptPerfTelecomInputClientPast24StatHistoryInvCvPort1 | read-only | current | Previous 24-hours EBC counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.60.11.6.64.1.3 | Columnpm10010mptPerfTelecomInputClientPast24StatHistoryCvValuePort1 | read-only | current | Previous 24-hours EBC counter :This OID gives the previous 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.60.11.6.64.1.4 | Columnpm10010mptPerfTelecomInputClientPast24StatHistoryInvEsPort1 | read-only | current | Previous 24-hours ES counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.60.11.6.64.1.5 | Columnpm10010mptPerfTelecomInputClientPast24StatHistoryEsValuePort1 | read-only | current | Previous 24-hours ES counter :This OID gives the previous 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.60.11.6.64.1.6 | Columnpm10010mptPerfTelecomInputClientPast24StatHistoryInvSesPort1 | read-only | current | Previous 24-hours SES counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.60.11.6.64.1.7 | Columnpm10010mptPerfTelecomInputClientPast24StatHistorySesValuePort1 | read-only | current | Previous 24-hours SES counter :This OID gives the previous 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.60.11.6.64.1.8 | Columnpm10010mptPerfTelecomInputClientPast24StatHistoryInvSefsPort1 | read-only | current | Previous 24-hours SEFS counter inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.60.11.6.64.1.9 | Columnpm10010mptPerfTelecomInputClientPast24StatHistorySefsValuePort1 | read-only | current | Previous 24-hours SEFS counter :This OID gives the previous 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.60.11.6.64.1.10 | Columnpm10010mptPerfTelecomInputClientPast24StatHistoryInvUasPort1 | read-only | current | Previous 24-hours UAS counter inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.60.11.6.64.1.11 | Columnpm10010mptPerfTelecomInputClientPast24StatHistoryUasValuePort1 | read-only | current | Previous 24-hours UAS counter :This OID gives the previous 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.60.11.6.80 | Tablepm10010mptPerfTelecomOutputClientCurrent15StatTable | not-accessible | current | List of pm10010mptPerfTelecomOutputClientCurrent15Stat Article |
| 1.3.6.1.4.1.20044.60.11.6.80.1 | Rowpm10010mptPerfTelecomOutputClientCurrent15StatEntry | not-accessible | current | Row definition for the pm10010mptPerfTelecomOutputClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.60.11.6.80.1.1 | Columnpm10010mptPerfTelecomOutputClientCurrent15StatIndex | read-only | current | Index definition for the pm10010mptPerfTelecomOutputClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.60.11.6.80.1.2 | Columnpm10010mptPerfTelecomOutputClientCurrent15StatInvCvPortn | read-only | current | Current 15-min EBC counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.60.11.6.80.1.3 | Columnpm10010mptPerfTelecomOutputClientCurrent15StatCvValuePortn | read-only | current | Current 15-min EBC counter :This OID gives the current 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.60.11.6.80.1.4 | Columnpm10010mptPerfTelecomOutputClientCurrent15StatInvEsPortn | read-only | current | Current 15-min ES counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.60.11.6.80.1.5 | Columnpm10010mptPerfTelecomOutputClientCurrent15StatEsValuePortn | read-only | current | Current 15-min ES counter :This OID gives the current 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.60.11.6.80.1.6 | Columnpm10010mptPerfTelecomOutputClientCurrent15StatInvSesPortn | read-only | current | Current 15-min SES counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.60.11.6.80.1.7 | Columnpm10010mptPerfTelecomOutputClientCurrent15StatSesValuePortn | read-only | current | Current 15-min SES counter :This OID gives the current 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.60.11.6.80.1.8 | Columnpm10010mptPerfTelecomOutputClientCurrent15StatInvSefsPortn | read-only | current | Current 15-min SEFS counter inv. :This OID indicates that the current 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.60.11.6.80.1.9 | Columnpm10010mptPerfTelecomOutputClientCurrent15StatSefsValuePortn | read-only | current | Current 15-min SEFS counter :This OID gives the current 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.60.11.6.80.1.10 | Columnpm10010mptPerfTelecomOutputClientCurrent15StatInvUasPortn | read-only | current | Current 15-min UAS counter inv. :This OID indicates that the current 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.60.11.6.80.1.11 | Columnpm10010mptPerfTelecomOutputClientCurrent15StatUasValuePortn | read-only | current | Current 15-min UAS counter :This OID gives the current 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.60.11.6.96 | Tablepm10010mptPerfTelecomOutputClientPast15StatHistoryPort1Table | not-accessible | current | List of pm10010mptPerfTelecomOutputClientPast15StatHistory Article |
| 1.3.6.1.4.1.20044.60.11.6.96.1 | Rowpm10010mptPerfTelecomOutputClientPast15StatHistoryPort1Entry | not-accessible | current | Row definition for the pm10010mptPerfTelecomOutputClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.60.11.6.96.1.1 | Columnpm10010mptPerfTelecomOutputClientPast15StatHistoryPort1Index | read-only | current | Index definition for the pm10010mptPerfTelecomOutputClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.60.11.6.96.1.2 | Columnpm10010mptPerfTelecomOutputClientPast15StatHistoryInvCvPort1 | read-only | current | Previous 15-min EBC counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.60.11.6.96.1.3 | Columnpm10010mptPerfTelecomOutputClientPast15StatHistoryCvValuePort1 | read-only | current | Previous 15-min EBC counter :This OID gives the previous 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.60.11.6.96.1.4 | Columnpm10010mptPerfTelecomOutputClientPast15StatHistoryInvEsPort1 | read-only | current | Previous 15-min ES counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.60.11.6.96.1.5 | Columnpm10010mptPerfTelecomOutputClientPast15StatHistoryEsValuePort1 | read-only | current | Previous 15-min ES counter :This OID gives the previous 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.60.11.6.96.1.6 | Columnpm10010mptPerfTelecomOutputClientPast15StatHistoryInvSesPort1 | read-only | current | Previous 15-min SES counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.60.11.6.96.1.7 | Columnpm10010mptPerfTelecomOutputClientPast15StatHistorySesValuePort1 | read-only | current | Previous 15-min SES counter :This OID gives the previous 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.60.11.6.96.1.8 | Columnpm10010mptPerfTelecomOutputClientPast15StatHistoryInvSefsPort1 | read-only | current | Previous 15-min SEFS counter inv. :This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.60.11.6.96.1.9 | Columnpm10010mptPerfTelecomOutputClientPast15StatHistorySefsValuePort1 | read-only | current | Previous 15-min SEFS counter :This OID gives the previous 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.60.11.6.96.1.10 | Columnpm10010mptPerfTelecomOutputClientPast15StatHistoryInvUasPort1 | read-only | current | Previous 15-min UAS counter inv. :This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.60.11.6.96.1.11 | Columnpm10010mptPerfTelecomOutputClientPast15StatHistoryUasValuePort1 | read-only | current | Previous 15-min UAS counter :This OID gives the previous 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.60.11.6.112 | Tablepm10010mptPerfTelecomOutputClientCurrent24StatTable | not-accessible | current | List of pm10010mptPerfTelecomOutputClientCurrent24Stat Article |
| 1.3.6.1.4.1.20044.60.11.6.112.1 | Rowpm10010mptPerfTelecomOutputClientCurrent24StatEntry | not-accessible | current | Row definition for the pm10010mptPerfTelecomOutputClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.60.11.6.112.1.1 | Columnpm10010mptPerfTelecomOutputClientCurrent24StatIndex | read-only | current | Index definition for the pm10010mptPerfTelecomOutputClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.60.11.6.112.1.2 | Columnpm10010mptPerfTelecomOutputClientCurrent24StatInvCvPortn | read-only | current | Current 24-hours EBC counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.60.11.6.112.1.3 | Columnpm10010mptPerfTelecomOutputClientCurrent24StatCvValuePortn | read-only | current | Current 24-hours EBC counter :This OID gives the current 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.60.11.6.112.1.4 | Columnpm10010mptPerfTelecomOutputClientCurrent24StatInvEsPortn | read-only | current | Current 24-hours ES counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.60.11.6.112.1.5 | Columnpm10010mptPerfTelecomOutputClientCurrent24StatEsValuePortn | read-only | current | Current 24-hours ES counter :This OID gives the current 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.60.11.6.112.1.6 | Columnpm10010mptPerfTelecomOutputClientCurrent24StatInvSesPortn | read-only | current | Current 24-hours SES counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.60.11.6.112.1.7 | Columnpm10010mptPerfTelecomOutputClientCurrent24StatSesValuePortn | read-only | current | Current 24-hours SES counter :This OID gives the current 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.60.11.6.112.1.8 | Columnpm10010mptPerfTelecomOutputClientCurrent24StatInvSefsPortn | read-only | current | Current 24-hours SEFS counter inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.60.11.6.112.1.9 | Columnpm10010mptPerfTelecomOutputClientCurrent24StatSefsValuePortn | read-only | current | Current 24-hours SEFS counter :This OID gives the current 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.60.11.6.112.1.10 | Columnpm10010mptPerfTelecomOutputClientCurrent24StatInvUasPortn | read-only | current | Current 24-hours UAS counter inv. :This OID indicates that the current 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.60.11.6.112.1.11 | Columnpm10010mptPerfTelecomOutputClientCurrent24StatUasValuePortn | read-only | current | Current 24-hours UAS counter :This OID gives the current 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.60.11.6.128 | Tablepm10010mptPerfTelecomOutputClientPast24StatHistoryPort1Table | not-accessible | current | List of pm10010mptPerfTelecomOutputClientPast24StatHistory Article |
| 1.3.6.1.4.1.20044.60.11.6.128.1 | Rowpm10010mptPerfTelecomOutputClientPast24StatHistoryPort1Entry | not-accessible | current | Row definition for the pm10010mptPerfTelecomOutputClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.60.11.6.128.1.1 | Columnpm10010mptPerfTelecomOutputClientPast24StatHistoryPort1Index | read-only | current | Index definition for the pm10010mptPerfTelecomOutputClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.60.11.6.128.1.2 | Columnpm10010mptPerfTelecomOutputClientPast24StatHistoryInvCvPort1 | read-only | current | Previous 24-hours EBC counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.60.11.6.128.1.3 | Columnpm10010mptPerfTelecomOutputClientPast24StatHistoryCvValuePort1 | read-only | current | Previous 24-hours EBC counter :This OID gives the previous 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.60.11.6.128.1.4 | Columnpm10010mptPerfTelecomOutputClientPast24StatHistoryInvEsPort1 | read-only | current | Previous 24-hours ES counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.60.11.6.128.1.5 | Columnpm10010mptPerfTelecomOutputClientPast24StatHistoryEsValuePort1 | read-only | current | Previous 24-hours ES counter :This OID gives the previous 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.60.11.6.128.1.6 | Columnpm10010mptPerfTelecomOutputClientPast24StatHistoryInvSesPort1 | read-only | current | Previous 24-hours SES counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.60.11.6.128.1.7 | Columnpm10010mptPerfTelecomOutputClientPast24StatHistorySesValuePort1 | read-only | current | Previous 24-hours SES counter :This OID gives the previous 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.60.11.6.128.1.8 | Columnpm10010mptPerfTelecomOutputClientPast24StatHistoryInvSefsPort1 | read-only | current | Previous 24-hours SEFS counter inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.60.11.6.128.1.9 | Columnpm10010mptPerfTelecomOutputClientPast24StatHistorySefsValuePort1 | read-only | current | Previous 24-hours SEFS counter :This OID gives the previous 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.60.11.6.128.1.10 | Columnpm10010mptPerfTelecomOutputClientPast24StatHistoryInvUasPort1 | read-only | current | Previous 24-hours UAS counter inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.60.11.6.128.1.11 | Columnpm10010mptPerfTelecomOutputClientPast24StatHistoryUasValuePort1 | read-only | current | Previous 24-hours UAS counter :This OID gives the previous 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.60.11.6.432 | Tablepm10010mptPerfDatacomClientCurrent15StatTable | not-accessible | current | List of pm10010mptPerfDatacomClientCurrent15Stat Article |
| 1.3.6.1.4.1.20044.60.11.6.432.1 | Rowpm10010mptPerfDatacomClientCurrent15StatEntry | not-accessible | current | Row definition for the pm10010mptPerfDatacomClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.60.11.6.432.1.1 | Columnpm10010mptPerfDatacomClientCurrent15StatIndex | read-only | current | Index definition for the pm10010mptPerfDatacomClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.60.11.6.432.1.4 | Columnrm10010perfdatacomclientCurrent15StatInCrcCountInvPortn | read-only | current | Client Current 15-min Input CRC counter inv. :This OID indicates that the current 15-min Input CRC counter is invalid |
| 1.3.6.1.4.1.20044.60.11.6.432.1.5 | Columnrm10010perfdatacomclientCurrent15StatInCrcCountPortn | read-only | current | Client Current 15-min Input CRC counter :This OID gives the current 15-min Input CRC counter value |
| 1.3.6.1.4.1.20044.60.11.6.432.1.6 | Columnrm10010perfdatacomclientCurrent15StatInPacketCountInvPortn | read-only | current | Client Current 15-min Input Packet counter inv. :This OID indicates that the current 15-min Input Packet counter is invalid |
| 1.3.6.1.4.1.20044.60.11.6.432.1.7 | Columnrm10010perfdatacomclientCurrent15StatInPacketCountPortn | read-only | current | Client Current 15-min Input Packet counter :This OID gives the current 15-min Input Packet counter value |
| 1.3.6.1.4.1.20044.60.11.6.432.1.28 | Columnrm10010perfdatacomclientCurrent15StatOutCrcCountInvPortn | read-only | current | Client Current 15-min Output CRC counter inv. :This OID indicates that the current 15-min Output CRC counter is invalid |
| 1.3.6.1.4.1.20044.60.11.6.432.1.29 | Columnrm10010perfdatacomclientCurrent15StatOutCrcCountPortn | read-only | current | Client Current 15-min Output CRC counter :This OID gives the current 15-min Output CRC counter value |
| 1.3.6.1.4.1.20044.60.11.6.432.1.30 | Columnrm10010perfdatacomclientCurrent15StatOutPacketCountInvPortn | read-only | current | Client Current 15-min Output Packet counter inv. :This OID indicates that the current 15-min Output Packets counter is invalid |
| 1.3.6.1.4.1.20044.60.11.6.432.1.31 | Columnrm10010perfdatacomclientCurrent15StatOutPacketCountPortn | read-only | current | Client Current 15-min Output Packet counter :This OID gives the current 15-min Output Packets counter value |
| 1.3.6.1.4.1.20044.60.11.6.448 | Tablepm10010mptPerfDatacomClientPast15StatHistoryPort1Table | not-accessible | current | List of pm10010mptPerfDatacomClientPast15StatHistory Article |
| 1.3.6.1.4.1.20044.60.11.6.448.1 | Rowpm10010mptPerfDatacomClientPast15StatHistoryPort1Entry | not-accessible | current | Row definition for the pm10010mptPerfDatacomClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.60.11.6.448.1.1 | Columnpm10010mptPerfDatacomClientPast15StatHistoryPort1Index | read-only | current | Index definition for the pm10010mptPerfDatacomClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.60.11.6.448.1.4 | Columnrm10010perfdatacomclientPast15StatInCrcCountInvPort1 | read-only | current | Client Past 15-min Input CRC counter inv. :This OID indicates that the past 15-min Input CRC counter is invalid |
| 1.3.6.1.4.1.20044.60.11.6.448.1.5 | Columnrm10010perfdatacomclientPast15StatInCrcCountPort1 | read-only | current | Client Past 15-min Input CRC counter :This OID gives the past 15-min Input CRC counter value |
| 1.3.6.1.4.1.20044.60.11.6.448.1.6 | Columnrm10010perfdatacomclientPast15StatInPacketCountInvPort1 | read-only | current | Client Past 15-min Input Packet counter inv. :This OID indicates that the past 15-min Input Packet counter is invalid |
| 1.3.6.1.4.1.20044.60.11.6.448.1.7 | Columnrm10010perfdatacomclientPast15StatInPacketCountPort1 | read-only | current | Client Past 15-min Input Packet counter :This OID gives the past 15-min Input Packet counter value |
| 1.3.6.1.4.1.20044.60.11.6.448.1.28 | Columnrm10010perfdatacomclientPast15StatOutCrcCountInvPort1 | read-only | current | Client Past 15-min Output CRC counter inv. :This OID indicates that the past 15-min Output CRC counter is invalid |
| 1.3.6.1.4.1.20044.60.11.6.448.1.29 | Columnrm10010perfdatacomclientPast15StatOutCrcCountPort1 | read-only | current | Client Past 15-min Output CRC counter :This OID gives the past 15-min Output CRC counter value |
| 1.3.6.1.4.1.20044.60.11.6.448.1.30 | Columnrm10010perfdatacomclientPast15StatOutPacketCountInvPort1 | read-only | current | Client Past 15-min Output Packet counter inv. :This OID indicates that the past 15-min Output Packets counter is invalid |
| 1.3.6.1.4.1.20044.60.11.6.448.1.31 | Columnrm10010perfdatacomclientPast15StatOutPacketCountPort1 | read-only | current | Client Past 15-min Output Packet counter :This OID gives the past 15-min Output Packets counter value |
| 1.3.6.1.4.1.20044.60.11.6.464 | Tablepm10010mptPerfDatacomClientCurrent24StatTable | not-accessible | current | List of pm10010mptPerfDatacomClientCurrent24Stat Article |
| 1.3.6.1.4.1.20044.60.11.6.464.1 | Rowpm10010mptPerfDatacomClientCurrent24StatEntry | not-accessible | current | Row definition for the pm10010mptPerfDatacomClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.60.11.6.464.1.1 | Columnpm10010mptPerfDatacomClientCurrent24StatIndex | read-only | current | Index definition for the pm10010mptPerfDatacomClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.60.11.6.464.1.4 | Columnrm10010perfdatacomclientCurrent24StatInCrcCountInvPortn | read-only | current | Client Current 24-hours Input CRC counter inv. :This OID indicates that the current 24-hours Input CRC counter is invalid |
| 1.3.6.1.4.1.20044.60.11.6.464.1.5 | Columnrm10010perfdatacomclientCurrent24StatInCrcCountPortn | read-only | current | Client Current 24-hours Input CRC counter :This OID gives the current 24-hours Input CRC counter value |
| 1.3.6.1.4.1.20044.60.11.6.464.1.6 | Columnrm10010perfdatacomclientCurrent24StatInPacketCountInvPortn | read-only | current | Client Current 24-hours Input Packet counter inv. :This OID indicates that the current 24-hours Input Packet counter is invalid |
| 1.3.6.1.4.1.20044.60.11.6.464.1.7 | Columnrm10010perfdatacomclientCurrent24StatInPacketCountPortn | read-only | current | Client Current 24-hours Input Packet counter :This OID gives the current 24-hours Input Packet counter value |
| 1.3.6.1.4.1.20044.60.11.6.464.1.28 | Columnrm10010perfdatacomclientCurrent24StatOutCrcCountInvPortn | read-only | current | Client Current 24-hours Output CRC counter inv. :This OID indicates that the current 24-hours Output CRC counter is invalid |
| 1.3.6.1.4.1.20044.60.11.6.464.1.29 | Columnrm10010perfdatacomclientCurrent24StatOutCrcCountPortn | read-only | current | Client Current 24-hours Output CRC counter :This OID gives the current 24-hours Output CRC counter value |
| 1.3.6.1.4.1.20044.60.11.6.464.1.30 | Columnrm10010perfdatacomclientCurrent24StatOutPacketCountInvPortn | read-only | current | Client Current 24-hours Output Packet counter inv. :This OID indicates that the current 24-hours Output Packets counter is invalid |
| 1.3.6.1.4.1.20044.60.11.6.464.1.31 | Columnrm10010perfdatacomclientCurrent24StatOutPacketCountPortn | read-only | current | Client Current 24-hours Output Packet counter :This OID gives the current 24-hours Output Packets counter value |
| 1.3.6.1.4.1.20044.60.11.6.480 | Tablepm10010mptPerfDatacomClientPast24StatHistoryPort1Table | not-accessible | current | List of pm10010mptPerfDatacomClientPast24StatHistory Article |
| 1.3.6.1.4.1.20044.60.11.6.480.1 | Rowpm10010mptPerfDatacomClientPast24StatHistoryPort1Entry | not-accessible | current | Row definition for the pm10010mptPerfDatacomClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.60.11.6.480.1.1 | Columnpm10010mptPerfDatacomClientPast24StatHistoryPort1Index | read-only | current | Index definition for the pm10010mptPerfDatacomClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.60.11.6.480.1.4 | Columnrm10010perfdatacomclientPast24StatInCrcCountInvPort1 | read-only | current | Client Past 24-hours Input CRC counter inv. :This OID indicates that the past 24-hours Input CRC counter is invalid |
| 1.3.6.1.4.1.20044.60.11.6.480.1.5 | Columnrm10010perfdatacomclientPast24StatInCrcCountPort1 | read-only | current | Client Past 24-hours Input CRC counter :This OID gives the past 24-hours Input CRC counter value |
| 1.3.6.1.4.1.20044.60.11.6.480.1.6 | Columnrm10010perfdatacomclientPast24StatInPacketCountInvPort1 | read-only | current | Client Past 24-hours Input Packet counter inv. :This OID indicates that the past 24-hours Input Packet counter is invalid |
| 1.3.6.1.4.1.20044.60.11.6.480.1.7 | Columnrm10010perfdatacomclientPast24StatInPacketCountPort1 | read-only | current | Client Past 24-hours Input Packet counter :This OID gives the past 24-hours Input Packet counter value |
| 1.3.6.1.4.1.20044.60.11.6.480.1.28 | Columnrm10010perfdatacomclientPast24StatOutCrcCountInvPort1 | read-only | current | Client Past 24-hours Output CRC counter inv. :This OID indicates that the past 24-hours Output CRC counter is invalid |
| 1.3.6.1.4.1.20044.60.11.6.480.1.29 | Columnrm10010perfdatacomclientPast24StatOutCrcCountPort1 | read-only | current | Client Past 24-hours Output CRC counter :This OID gives the past 24-hours Output CRC counter value |
| 1.3.6.1.4.1.20044.60.11.6.480.1.30 | Columnrm10010perfdatacomclientPast24StatOutPacketCountInvPort1 | read-only | current | Client Past 24-hours Output Packet counter inv. :This OID indicates that the past 24-hours Output Packets counter is invalid |
| 1.3.6.1.4.1.20044.60.11.6.480.1.31 | Columnrm10010perfdatacomclientPast24StatOutPacketCountPort1 | read-only | current | Client Past 24-hours Output Packet counter :This OID gives the past 24-hours Output Packets counter value |
| 1.3.6.1.4.1.20044.60.11.7 | Nodepm10010mptMonPerfLine | |||
| 1.3.6.1.4.1.20044.60.11.7.192 | Tablepm10010mptPerfTelecomLinePostFecCurrent15StatTable | not-accessible | current | List of pm10010mptPerfTelecomLinePostFecCurrent15Stat Article |
| 1.3.6.1.4.1.20044.60.11.7.192.1 | Rowpm10010mptPerfTelecomLinePostFecCurrent15StatEntry | not-accessible | current | Row definition for the pm10010mptPerfTelecomLinePostFecCurrent15Stat table |
| 1.3.6.1.4.1.20044.60.11.7.192.1.1 | Columnpm10010mptPerfTelecomLinePostFecCurrent15StatIndex | read-only | current | Index definition for the pm10010mptPerfTelecomLinePostFecCurrent15Stat table |
| 1.3.6.1.4.1.20044.60.11.7.192.1.2 | Columnpm10010mptPerfTelecomLinePostFecCurrent15StatInvCvPortn | read-only | current | Current 15-min EBC counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.60.11.7.192.1.3 | Columnpm10010mptPerfTelecomLinePostFecCurrent15StatCvValuePortn | read-only | current | Current 15-min EBC counter :This OID gives the current 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.60.11.7.192.1.4 | Columnpm10010mptPerfTelecomLinePostFecCurrent15StatInvEsPortn | read-only | current | Current 15-min ES counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.60.11.7.192.1.5 | Columnpm10010mptPerfTelecomLinePostFecCurrent15StatEsValuePortn | read-only | current | Current 15-min ES counter :This OID gives the current 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.60.11.7.192.1.6 | Columnpm10010mptPerfTelecomLinePostFecCurrent15StatInvSesPortn | read-only | current | Current 15-min SES counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.60.11.7.192.1.7 | Columnpm10010mptPerfTelecomLinePostFecCurrent15StatSesValuePortn | read-only | current | Current 15-min SES counter :This OID gives the current 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.60.11.7.192.1.8 | Columnpm10010mptPerfTelecomLinePostFecCurrent15StatInvSefsPortn | read-only | current | Current 15-min SEFS counter inv. :This OID indicates that the current 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.60.11.7.192.1.9 | Columnpm10010mptPerfTelecomLinePostFecCurrent15StatSefsValuePortn | read-only | current | Current 15-min SEFS counter :This OID gives the current 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.60.11.7.192.1.10 | Columnpm10010mptPerfTelecomLinePostFecCurrent15StatInvUasPortn | read-only | current | Current 15-min UAS counter inv. :This OID indicates that the current 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.60.11.7.192.1.11 | Columnpm10010mptPerfTelecomLinePostFecCurrent15StatUasValuePortn | read-only | current | Current 15-min UAS counter :This OID gives the current 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.60.11.7.193 | Tablepm10010mptPerfTelecomLinePostFecPast15StatHistoryPort1Table | not-accessible | current | List of pm10010mptPerfTelecomLinePostFecPast15StatHistory Article |
| 1.3.6.1.4.1.20044.60.11.7.193.1 | Rowpm10010mptPerfTelecomLinePostFecPast15StatHistoryPort1Entry | not-accessible | current | Row definition for the pm10010mptPerfTelecomLinePostFecPast15StatHistory table |
| 1.3.6.1.4.1.20044.60.11.7.193.1.1 | Columnpm10010mptPerfTelecomLinePostFecPast15StatHistoryPort1Index | read-only | current | Index definition for the pm10010mptPerfTelecomLinePostFecPast15StatHistory table |
| 1.3.6.1.4.1.20044.60.11.7.193.1.2 | Columnpm10010mptPerfTelecomLinePostFecPast15StatHistoryInvCvPort1 | read-only | current | Previous 15-min EBC counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.60.11.7.193.1.3 | Columnpm10010mptPerfTelecomLinePostFecPast15StatHistoryCvValuePort1 | read-only | current | Previous 15-min EBC counter :This OID gives the previous 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.60.11.7.193.1.4 | Columnpm10010mptPerfTelecomLinePostFecPast15StatHistoryInvEsPort1 | read-only | current | Previous 15-min ES counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.60.11.7.193.1.5 | Columnpm10010mptPerfTelecomLinePostFecPast15StatHistoryEsValuePort1 | read-only | current | Previous 15-min ES counter :This OID gives the previous 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.60.11.7.193.1.6 | Columnpm10010mptPerfTelecomLinePostFecPast15StatHistoryInvSesPort1 | read-only | current | Previous 15-min SES counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.60.11.7.193.1.7 | Columnpm10010mptPerfTelecomLinePostFecPast15StatHistorySesValuePort1 | read-only | current | Previous 15-min SES counter :This OID gives the previous 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.60.11.7.193.1.8 | Columnpm10010mptPerfTelecomLinePostFecPast15StatHistoryInvSefsPort1 | read-only | current | Previous 15-min SEFS counter inv. :This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.60.11.7.193.1.9 | Columnpm10010mptPerfTelecomLinePostFecPast15StatHistorySefsValuePort1 | read-only | current | Previous 15-min SEFS counter :This OID gives the previous 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.60.11.7.193.1.10 | Columnpm10010mptPerfTelecomLinePostFecPast15StatHistoryInvUasPort1 | read-only | current | Previous 15-min UAS counter inv. :This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.60.11.7.193.1.11 | Columnpm10010mptPerfTelecomLinePostFecPast15StatHistoryUasValuePort1 | read-only | current | Previous 15-min UAS counter :This OID gives the previous 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.60.11.7.194 | Tablepm10010mptPerfTelecomLinePostFecCurrent24StatTable | not-accessible | current | List of pm10010mptPerfTelecomLinePostFecCurrent24Stat Article |
| 1.3.6.1.4.1.20044.60.11.7.194.1 | Rowpm10010mptPerfTelecomLinePostFecCurrent24StatEntry | not-accessible | current | Row definition for the pm10010mptPerfTelecomLinePostFecCurrent24Stat table |
| 1.3.6.1.4.1.20044.60.11.7.194.1.1 | Columnpm10010mptPerfTelecomLinePostFecCurrent24StatIndex | read-only | current | Index definition for the pm10010mptPerfTelecomLinePostFecCurrent24Stat table |
| 1.3.6.1.4.1.20044.60.11.7.194.1.2 | Columnpm10010mptPerfTelecomLinePostFecCurrent24StatInvCvPortn | read-only | current | Current 24-hours EBC counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.60.11.7.194.1.3 | Columnpm10010mptPerfTelecomLinePostFecCurrent24StatCvValuePortn | read-only | current | Current 24-hours EBC counter :This OID gives the current 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.60.11.7.194.1.4 | Columnpm10010mptPerfTelecomLinePostFecCurrent24StatInvEsPortn | read-only | current | Current 24-hours ES counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.60.11.7.194.1.5 | Columnpm10010mptPerfTelecomLinePostFecCurrent24StatEsValuePortn | read-only | current | Current 24-hours ES counter :This OID gives the current 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.60.11.7.194.1.6 | Columnpm10010mptPerfTelecomLinePostFecCurrent24StatInvSesPortn | read-only | current | Current 24-hours SES counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.60.11.7.194.1.7 | Columnpm10010mptPerfTelecomLinePostFecCurrent24StatSesValuePortn | read-only | current | Current 24-hours SES counter :This OID gives the current 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.60.11.7.194.1.8 | Columnpm10010mptPerfTelecomLinePostFecCurrent24StatInvSefsPortn | read-only | current | Current 24-hours SEFS counter inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.60.11.7.194.1.9 | Columnpm10010mptPerfTelecomLinePostFecCurrent24StatSefsValuePortn | read-only | current | Current 24-hours SEFS counter :This OID gives the current 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.60.11.7.194.1.10 | Columnpm10010mptPerfTelecomLinePostFecCurrent24StatInvUasPortn | read-only | current | Current 24-hours UAS counter inv. :This OID indicates that the current 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.60.11.7.194.1.11 | Columnpm10010mptPerfTelecomLinePostFecCurrent24StatUasValuePortn | read-only | current | Current 24-hours UAS counter :This OID gives the current 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.60.11.7.195 | Tablepm10010mptPerfTelecomLinePostFecPast24StatHistoryPort1Table | not-accessible | current | List of pm10010mptPerfTelecomLinePostFecPast24StatHistory Article |
| 1.3.6.1.4.1.20044.60.11.7.195.1 | Rowpm10010mptPerfTelecomLinePostFecPast24StatHistoryPort1Entry | not-accessible | current | Row definition for the pm10010mptPerfTelecomLinePostFecPast24StatHistory table |
| 1.3.6.1.4.1.20044.60.11.7.195.1.1 | Columnpm10010mptPerfTelecomLinePostFecPast24StatHistoryPort1Index | read-only | current | Index definition for the pm10010mptPerfTelecomLinePostFecPast24StatHistory table |
| 1.3.6.1.4.1.20044.60.11.7.195.1.2 | Columnpm10010mptPerfTelecomLinePostFecPast24StatHistoryInvCvPort1 | read-only | current | Previous 24-hours EBC counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.60.11.7.195.1.3 | Columnpm10010mptPerfTelecomLinePostFecPast24StatHistoryCvValuePort1 | read-only | current | Previous 24-hours EBC counter :This OID gives the previous 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.60.11.7.195.1.4 | Columnpm10010mptPerfTelecomLinePostFecPast24StatHistoryInvEsPort1 | read-only | current | Previous 24-hours ES counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.60.11.7.195.1.5 | Columnpm10010mptPerfTelecomLinePostFecPast24StatHistoryEsValuePort1 | read-only | current | Previous 24-hours ES counter :This OID gives the previous 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.60.11.7.195.1.6 | Columnpm10010mptPerfTelecomLinePostFecPast24StatHistoryInvSesPort1 | read-only | current | Previous 24-hours SES counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.60.11.7.195.1.7 | Columnpm10010mptPerfTelecomLinePostFecPast24StatHistorySesValuePort1 | read-only | current | Previous 24-hours SES counter :This OID gives the previous 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.60.11.7.195.1.8 | Columnpm10010mptPerfTelecomLinePostFecPast24StatHistoryInvSefsPort1 | read-only | current | Previous 24-hours SEFS counter inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.60.11.7.195.1.9 | Columnpm10010mptPerfTelecomLinePostFecPast24StatHistorySefsValuePort1 | read-only | current | Previous 24-hours SEFS counter :This OID gives the previous 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.60.11.7.195.1.10 | Columnpm10010mptPerfTelecomLinePostFecPast24StatHistoryInvUasPort1 | read-only | current | Previous 24-hours UAS counter inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.60.11.7.195.1.11 | Columnpm10010mptPerfTelecomLinePostFecPast24StatHistoryUasValuePort1 | read-only | current | Previous 24-hours UAS counter :This OID gives the previous 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.60.11.7.208 | Tablepm10010mptPerfTelecomBerLinePreFecCurrent15StatTable | not-accessible | current | List of pm10010mptPerfTelecomBerLinePreFecCurrent15Stat Article |
| 1.3.6.1.4.1.20044.60.11.7.208.1 | Rowpm10010mptPerfTelecomBerLinePreFecCurrent15StatEntry | not-accessible | current | Row definition for the pm10010mptPerfTelecomBerLinePreFecCurrent15Stat table |
| 1.3.6.1.4.1.20044.60.11.7.208.1.1 | Columnpm10010mptPerfTelecomBerLinePreFecCurrent15StatIndex | read-only | current | Index definition for the pm10010mptPerfTelecomBerLinePreFecCurrent15Stat table |
| 1.3.6.1.4.1.20044.60.11.7.208.1.2 | Columnpm10010mptPerfTelecomBerLinePreFecCurrent15StatInvBerPortn | read-only | current | Current 15-min BER counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.60.11.7.208.1.3 | Columnpm10010mptPerfTelecomBerLinePreFecCurrent15StatBerValuePortn | read-only | current | Current 15-min BER counter :This OID gives the current 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.60.11.7.208.1.4 | Columnpm10010mptPerfTelecomBerLinePreFecCurrent15StatInvMinBerPortn | read-only | current | Current 15-min MinBER counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.60.11.7.208.1.5 | Columnpm10010mptPerfTelecomBerLinePreFecCurrent15StatMinBerValuePortn | read-only | current | Current 15-min MinBER counter :This OID gives the current 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.60.11.7.208.1.6 | Columnpm10010mptPerfTelecomBerLinePreFecCurrent15StatInvMaxBerPortn | read-only | current | Current 15-min MaxBER counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.60.11.7.208.1.7 | Columnpm10010mptPerfTelecomBerLinePreFecCurrent15StatMaxBerValuePortn | read-only | current | Current 15-min MaxBER counter :This OID gives the current 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.60.11.7.209 | Tablepm10010mptPerfTelecomBerLinePreFecPast15StatHistoryPort1Table | not-accessible | current | List of pm10010mptPerfTelecomBerLinePreFecPast15StatHistory Article |
| 1.3.6.1.4.1.20044.60.11.7.209.1 | Rowpm10010mptPerfTelecomBerLinePreFecPast15StatHistoryPort1Entry | not-accessible | current | Row definition for the pm10010mptPerfTelecomBerLinePreFecPast15StatHistory table |
| 1.3.6.1.4.1.20044.60.11.7.209.1.1 | Columnpm10010mptPerfTelecomBerLinePreFecPast15StatHistoryPort1Index | read-only | current | Index definition for the pm10010mptPerfTelecomBerLinePreFecPast15StatHistory table |
| 1.3.6.1.4.1.20044.60.11.7.209.1.2 | Columnpm10010mptPerfTelecomBerLinePreFecPast15StatHistoryInvBerPort1 | read-only | current | Previous 15-min BER counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.60.11.7.209.1.3 | Columnpm10010mptPerfTelecomBerLinePreFecPast15StatHistoryBerValuePort1 | read-only | current | Previous 15-min BER counter :This OID gives the previous 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.60.11.7.209.1.4 | Columnpm10010mptPerfTelecomBerLinePreFecPast15StatHistoryInvMinBerPort1 | read-only | current | Previous 15-min MinBER counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.60.11.7.209.1.5 | Columnpm10010mptPerfTelecomBerLinePreFecPast15StatHistoryMinBerValuePort1 | read-only | current | Previous 15-min MinBER counter :This OID gives the previous 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.60.11.7.209.1.6 | Columnpm10010mptPerfTelecomBerLinePreFecPast15StatHistoryInvMaxBerPort1 | read-only | current | Previous 15-min MaxBER counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.60.11.7.209.1.7 | Columnpm10010mptPerfTelecomBerLinePreFecPast15StatHistoryMaxBerValuePort1 | read-only | current | Previous 15-min MaxBER counter :This OID gives the previous 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.60.11.7.210 | Tablepm10010mptPerfTelecomBerLinePreFecCurrent24StatTable | not-accessible | current | List of pm10010mptPerfTelecomBerLinePreFecCurrent24Stat Article |
| 1.3.6.1.4.1.20044.60.11.7.210.1 | Rowpm10010mptPerfTelecomBerLinePreFecCurrent24StatEntry | not-accessible | current | Row definition for the pm10010mptPerfTelecomBerLinePreFecCurrent24Stat table |
| 1.3.6.1.4.1.20044.60.11.7.210.1.1 | Columnpm10010mptPerfTelecomBerLinePreFecCurrent24StatIndex | read-only | current | Index definition for the pm10010mptPerfTelecomBerLinePreFecCurrent24Stat table |
| 1.3.6.1.4.1.20044.60.11.7.210.1.2 | Columnpm10010mptPerfTelecomBerLinePreFecCurrent24StatInvBerPortn | read-only | current | Current 24-hours BER counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.60.11.7.210.1.3 | Columnpm10010mptPerfTelecomBerLinePreFecCurrent24StatBerValuePortn | read-only | current | Current 24-hours BER counter :This OID gives the current 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.60.11.7.210.1.4 | Columnpm10010mptPerfTelecomBerLinePreFecCurrent24StatInvMinBerPortn | read-only | current | Current 24-hoursMinBER counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.60.11.7.210.1.5 | Columnpm10010mptPerfTelecomBerLinePreFecCurrent24StatMinBerValuePortn | read-only | current | Current 24-hours MinBER counter :This OID gives the current 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.60.11.7.210.1.6 | Columnpm10010mptPerfTelecomBerLinePreFecCurrent24StatInvMaxBerPortn | read-only | current | Current 24-hours MaxBER counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.60.11.7.210.1.7 | Columnpm10010mptPerfTelecomBerLinePreFecCurrent24StatMaxBerValuePortn | read-only | current | Current 24-hours MaxBER counter :This OID gives the current 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.60.11.7.211 | Tablepm10010mptPerfTelecomBerLinePreFecPast24StatHistoryPort1Table | not-accessible | current | List of pm10010mptPerfTelecomBerLinePreFecPast24StatHistory Article |
| 1.3.6.1.4.1.20044.60.11.7.211.1 | Rowpm10010mptPerfTelecomBerLinePreFecPast24StatHistoryPort1Entry | not-accessible | current | Row definition for the pm10010mptPerfTelecomBerLinePreFecPast24StatHistory table |
| 1.3.6.1.4.1.20044.60.11.7.211.1.1 | Columnpm10010mptPerfTelecomBerLinePreFecPast24StatHistoryPort1Index | read-only | current | Index definition for the pm10010mptPerfTelecomBerLinePreFecPast24StatHistory table |
| 1.3.6.1.4.1.20044.60.11.7.211.1.2 | Columnpm10010mptPerfTelecomBerLinePreFecPast24StatHistoryInvBerPort1 | read-only | current | Previous 24-hours BER counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.60.11.7.211.1.3 | Columnpm10010mptPerfTelecomBerLinePreFecPast24StatHistoryBerValuePort1 | read-only | current | Previous 24-hours BER counter :This OID gives the previous 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.60.11.7.211.1.4 | Columnpm10010mptPerfTelecomBerLinePreFecPast24StatHistoryInvMinBerPort1 | read-only | current | Previous 24-hours MinBER counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.60.11.7.211.1.5 | Columnpm10010mptPerfTelecomBerLinePreFecPast24StatHistoryMinBerValuePort1 | read-only | current | Previous 24-hours MinBER counter :This OID gives the previous 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.60.11.7.211.1.6 | Columnpm10010mptPerfTelecomBerLinePreFecPast24StatHistoryInvMaxBerPort1 | read-only | current | Previous 24-hours MaxBER counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.60.11.7.211.1.7 | Columnpm10010mptPerfTelecomBerLinePreFecPast24StatHistoryMaxBerValuePort1 | read-only | current | Previous 24-hours MaxBER counter :This OID gives the previous 24-hours severely Errored Second counter value |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Pm10010mptAdjustValue | INTEGER { otxadjustvalue0(0), otxadjustvalue1(1), otxadjustvalue2(2), otxadjustvalue3(3), otxadjustvalue4(4), otxadjustvalue5(5), otxadjustvalue6(6), otxadjustvalue7(7), otxadjustvalue8(8), otxadjustvalue9(9), otxadjustvalue10(10) } | current | Different values in Adjust mode on OTX-TLH on client and line ports |
| Pm10010mptClientProtocol | INTEGER { protocolclientvalue0(0), protocolclientvalue1(1), protocolclientvalue2(2), protocolclientvalue3(3), protocolclientvalue4(4), protocolclientvalue5(5), protocolclientvalue6(6), protocolclientvalue7(7), protocolclientvalue8(8) } | current | Different values on the protocol on the client ports |
| Pm10010mptMultiRate | INTEGER { rate100Mhz(0), rate250Mhz(1), rate500Mhz(2), rate1Ghz(3) } | current | different rate for a client port |
| Pm10010mptOrxChannel | INTEGER | current | Channel selection on transceiver Rx line ports |
| Pm10010mptOtxChannel | INTEGER | current | Channel selection on transceiver Tx line ports |
| Pm10010mptOtxGrid | INTEGER { otxgrid200(200), otxgrid100(100), otxgrid50(50) } | current | Different grids on OTX-TLH on client and line ports |
| Pm10010mptOtxMode | INTEGER { otx80mode(1), otx60mode(2), otxadjustmode(4) } | current | Different modes on OTX-TLH on client and line ports |
| Pm10010mptProtocolMode | INTEGER { protocolmodevalue0(0), protocolmodevalue1(1), protocolmodevalue2(2), protocolmodevalue3(3) } | current | Different values on the protocol mode |
| Rm10010ClientIgnoreTimer | INTEGER { ignoretimerclientvalue0(0), ignoretimerclientvalue1(1), ignoretimerclientvalue2(2), ignoretimerclientvalue3(3), ignoretimerclientvalue4(4), ignoretimerclientvalue5(5), ignoretimerclientvalue6(6), ignoretimerclientvalue7(7), ignoretimerclientvalue8(8), ignoretimerclientvalue9(9), ignoretimerclientvalue10(10) } | current | Different values on the ignore timer on the client ports |