EKINOPS-Pm10010mr-MIB
715 objects
Creation.
Imported Objects
| EKINOPS-MIB | EkiApiState EkiMeasureType EkiMode ekinops EkiOnOff EkiProtocol EkiState EkiSynchroMode |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.20044.63 | IdentitymodulePm10010mr | Creation. | ||
| 1.3.6.1.4.1.20044.63.2 | Nodepm10010mralarms | |||
| 1.3.6.1.4.1.20044.63.2.1 | Nodepm10010mrAlmOther | |||
| 1.3.6.1.4.1.20044.63.2.1.1 | Nodepm10010mrAlmOtherNurg | |||
| 1.3.6.1.4.1.20044.63.2.1.1.2 | Nodepm10010mrAlmsynthAlm2 | |||
| 1.3.6.1.4.1.20044.63.2.1.1.2.1 | Scalarpm10010mrAlmConfTableSave | read-only | current | PM Configuration Save :This OID is at 1 during the saving of a new configuration table in the module Flash memory. <Condtype> CONF_TABLE_SAVE <Probcause> infor… |
| 1.3.6.1.4.1.20044.63.2.1.1.2.2 | Scalarpm10010mrAlmInvUpload | read-only | current | Inventory Upload :This OID is at 1 during the uploading of PM inventory information. <Condtype> INV_UPLOAD <Probcause> informationalStatus(1000) <Alarmtype> ot… |
| 1.3.6.1.4.1.20044.63.2.1.1.2.3 | Scalarpm10010mrAlmConfTableLoad | read-only | current | PM Configuration Load :This OID is at 1 during the loading of configuration tables in the modules RAM. <Condtype> CONF_TABLE_LOAD <Probcause> informationalStat… |
| 1.3.6.1.4.1.20044.63.2.1.1.2.4 | Scalarpm10010mrAlmCorrelatOff | read-only | current | Not Used :This OID, when set, indicates that alarm correlation is not being performed. <Condtype> CORRELAT_OFF <Probcause> informationalStatus(1000) <Alarmtype… |
| 1.3.6.1.4.1.20044.63.2.1.1.2.5 | Scalarpm10010mrAlmMaintenanceOn | read-only | current | Maintenance Mode :This OID indicates that the RM is in maintenance mode. <Help> This alarm indicates that the maintenance mode is enabled on the PM <Condtype> … |
| 1.3.6.1.4.1.20044.63.2.1.2 | Nodepm10010mrAlmOtherUrg | |||
| 1.3.6.1.4.1.20044.63.2.1.3 | Nodepm10010mrAlmOtherCrit | |||
| 1.3.6.1.4.1.20044.63.2.1.3.0 | Nodepm10010mrAlmsynthAlm0 | |||
| 1.3.6.1.4.1.20044.63.2.1.3.0.2 | Scalarpm10010mrAlmFailFan | read-only | current | Fan Fail :This OID is at 1 when any fail occurs on the fan tray <Help> This alarm indicates that the Fan tray module is in a failure condition <Condtype> FAIL_… |
| 1.3.6.1.4.1.20044.63.2.1.3.0.9 | Scalarpm10010mrAlmModGlobFail | read-only | current | Module Failure :This OID is set on detection of a failure originating from the RM <Help> This alarm is set on detection of a failure originating from the equip… |
| 1.3.6.1.4.1.20044.63.2.1.3.0.15 | Scalarpm10010mrAlmDefFuseA | read-only | current | Fuse A Fail :This OID indicates that the fuse of the power input A is in fail condition <Help> Status of the Fuse A <Condtype> DEF_FUSE_A <Probcause> powerProb… |
| 1.3.6.1.4.1.20044.63.2.1.3.0.16 | Scalarpm10010mrAlmDefFuseB | read-only | current | Fuse B Fail :This OID indicates that the fuse of the power input B is in fail condition <Help> Status of the Fuse B <Condtype> DEF_FUSE_B <Probcause> powerProb… |
| 1.3.6.1.4.1.20044.63.2.1.3.40 | Nodepm10010mrAlmclientModuleState | |||
| 1.3.6.1.4.1.20044.63.2.1.3.40.1 | Scalarpm10010mrAlmCfpInitialize | read-only | current | Client Trscv Initialize :This OID indicates the Client Trscv initialization is in progress <Help> Status indicating the Client Trscv initialization is in progr… |
| 1.3.6.1.4.1.20044.63.2.1.3.40.2 | Scalarpm10010mrAlmCfpLowPower | read-only | current | Client Trscv Low Power :This OID indicates the Client Trscv is in low power state <Help> Status indicating the Client Trscv is in low power state <Condtype> CF… |
| 1.3.6.1.4.1.20044.63.2.1.3.40.3 | Scalarpm10010mrAlmCfpHighPowerUp | read-only | current | Client Trscv High Power Up :This OID indicates the Client Trscv is leaving Low Power state <Help> Status indicating the Client Trscv is leaving Low Power state… |
| 1.3.6.1.4.1.20044.63.2.1.3.40.4 | Scalarpm10010mrAlmCfpTxOff | read-only | current | Client Trscv Laser Shutdown :This OID indicates the Client Trscv Laser is OFF <Help> Status indicating the Client Trscv Laser is OFF <Condtype> CFP_TX_OFF <Pro… |
| 1.3.6.1.4.1.20044.63.2.1.3.40.5 | Scalarpm10010mrAlmCfpTxTurnOn | read-only | current | Client Trscv Laser Turn On :This OID indicates the Client Trscv is turning on its laser <Help> Status indicating the Client Trscv is turning on its laser <Cond… |
| 1.3.6.1.4.1.20044.63.2.1.3.40.6 | Scalarpm10010mrAlmCfpReady | read-only | current | Client Trscv Ready :This OID indicates the Client Trscv is ready to operate <Help> Status indicating the Client Trscv is ready to operate <Condtype> CFP_READY … |
| 1.3.6.1.4.1.20044.63.2.1.3.40.7 | Scalarpm10010mrAlmCfpFault | read-only | current | Client Trscv Fault :This OID indicates the Client Trscv is in Fault state <Help> Status indicating the Client Trscv is in Fault state <Condtype> CFP_FAULT <Pro… |
| 1.3.6.1.4.1.20044.63.2.1.3.40.8 | Scalarpm10010mrAlmCfpTxTurnOff | read-only | current | Client Trscv Laser Turn Off :This OID indicates the Client Trscv is turning off its laser <Help> Status indicating the Client Trscv is turning off its laser <C… |
| 1.3.6.1.4.1.20044.63.2.1.3.40.9 | Scalarpm10010mrAlmCfpHighPowerDown | read-only | current | Client Trscv High Power Down :This OID indicates the Client Trscv is entering Low Power state <Help> Status indicating the Client Trscv is entering Low Power s… |
| 1.3.6.1.4.1.20044.63.2.1.3.41 | Nodepm10010mrAlmclientModuleGeneralStatus | |||
| 1.3.6.1.4.1.20044.63.2.1.3.41.4 | Scalarpm10010mrAlmCfpOutOfAlignment | read-only | current | Client Trscv Out Of Alignment :This OID indicates an Out of alignment on the Client Trscv Host Interface <Help> Alarm indicating an Out of alignment on the Cli… |
| 1.3.6.1.4.1.20044.63.2.1.3.41.5 | Scalarpm10010mrAlmCfpRxNetworkLol | read-only | current | Client Trscv Rx Network Loss Of Lock :This OID indicates of Loss of Lock is dected on the Client Trscv Rx Network interface <Help> Alarm indicating of Loss of … |
| 1.3.6.1.4.1.20044.63.2.1.3.41.6 | Scalarpm10010mrAlmCfpRxLos | read-only | current | Client Trscv Loss Of Signal :This OID indicates a Loss of Signal is detected on the Client Trscv <Help> Alarm indicating a Loss of Signal is detected on the Cl… |
| 1.3.6.1.4.1.20044.63.2.1.3.41.7 | Scalarpm10010mrAlmCfpTxHostLol | read-only | current | Client Trscv Tx Host Loss Of Lock :This OID indicates of Loss of Lock is detected on the Client Trscv Tx Host interface <Help> Alarm indicating of Loss of Lock… |
| 1.3.6.1.4.1.20044.63.2.1.3.41.8 | Scalarpm10010mrAlmCfpTxLosf | read-only | current | Client Trscv Loss Of Signal Functionality :This OID indicates a Loss of Signal functionality is detected on the Client Trscv <Help> Alarm indicating a Loss of … |
| 1.3.6.1.4.1.20044.63.2.1.3.41.9 | Scalarpm10010mrAlmCfpTxCmuLol | read-only | current | Client Trscv CMU Loss Of Lock :This OID indicates a Clock Multiplier Unit Loss of Lock is detected on the Client Trscv <Help> Alarm indicating a Clock Multipli… |
| 1.3.6.1.4.1.20044.63.2.1.3.41.10 | Scalarpm10010mrAlmCfpTxJitterPllLol | read-only | current | Client Trscv Tx Jitter PLL Loss Of Lock :This OID indicates a Tx Jitter PLL Loss of Lock is dtected on the Client Trscv <Help> Alarm indicating a Tx Jitter PLL… |
| 1.3.6.1.4.1.20044.63.2.1.3.41.11 | Scalarpm10010mrAlmCfpLossOfRefclk | read-only | current | Client Trscv Loss Of Ref Clock :This OID indicates a Loss of Reference clock is detected on the Client Trscv <Help> Alarm indicating a Loss of Reference clock … |
| 1.3.6.1.4.1.20044.63.2.1.3.41.14 | Scalarpm10010mrAlmCfpHwInterlock | read-only | current | Client Trscv Hardware Interlock :This OID indicates the Client Trscv power is higher than the cooling capacity <Help> Alarm indicating the Client Trscv power i… |
| 1.3.6.1.4.1.20044.63.2.1.3.42 | Nodepm10010mrAlmclientGlobalAlarmSummary | |||
| 1.3.6.1.4.1.20044.63.2.1.3.42.1 | Scalarpm10010mrAlmCfpSoftGlobAlarmTest | read-only | current | Client Trscv Global Alarm SW Test :This OID indicates the Client Trscv Global Alarm This OID is raised by SW request for test purpose <Help> Status indicating … |
| 1.3.6.1.4.1.20044.63.2.1.3.42.7 | Scalarpm10010mrAlmCfpNetworkLaneAlarmWarning2 | read-only | current | Client Trscv Network Alarm And Warning 2 :This OID indicates at least one DDM is detected on the Client Trscv Network Interface <Help> Synthesis alarm indicati… |
| 1.3.6.1.4.1.20044.63.2.1.3.42.8 | Scalarpm10010mrAlmCfpModuleState | read-only | current | Client Trscv Module State :This OID indicates the Client Trscv module state <Help> Synthesis alarm indicating the Client Trscv module state <Condtype> CFP_MODU… |
| 1.3.6.1.4.1.20044.63.2.1.3.42.9 | Scalarpm10010mrAlmCfpModuleGeneralStatus | read-only | current | Client Trscv General Status :This OID indicates the Client Trscv module general status <Help> Synthesis alarm indicating the Client Trscv module general status… |
| 1.3.6.1.4.1.20044.63.2.1.3.42.10 | Scalarpm10010mrAlmCfpModuleFault | read-only | current | Client Trscv Module Fault :This OID indicates at least one Fault is detected on the Client Trscv module <Help> Synthesis alarm indicating at least one Fault is… |
| 1.3.6.1.4.1.20044.63.2.1.3.42.11 | Scalarpm10010mrAlmCfpModuleAlarmWarning1 | read-only | current | Client Trscv Module Alarm And Warning 1 :This OID indicates at least one DDM This OID is detected on the Client Trscv module <Help> Synthesis alarm indicating … |
| 1.3.6.1.4.1.20044.63.2.1.3.42.12 | Scalarpm10010mrAlmCfpModuleAlarmWarning2 | read-only | current | Client Trscv Module Alarm And Warning 2 :This OID indicates at least one DDM is detected on the Client Trscv module <Help> Synthesis alarm indicating at least … |
| 1.3.6.1.4.1.20044.63.2.1.3.42.13 | Scalarpm10010mrAlmCfpNetworkLaneAlarmWarning1 | read-only | current | Client Trscv Network Alarm And Warning 1 :This OID indicates at least one DDM is detected on the Client Trscv Network Interface <Help> Synthesis alarm indicati… |
| 1.3.6.1.4.1.20044.63.2.1.3.42.14 | Scalarpm10010mrAlmCfpNetworkLaneFaultStatus | read-only | current | Client Trscv Network Fault And Status :This OID indicates at least one Fault or Status is detected on the Client Trscv Network Interface <Help> Synthesis alarm… |
| 1.3.6.1.4.1.20044.63.2.1.3.42.15 | Scalarpm10010mrAlmCfpHostLaneFaultStatus | read-only | current | Client Trscv Host Fault And Status :This OID indicates at least one Fault or Status is detected on the Client Trscv Host Interface <Help> Synthesis alarm indic… |
| 1.3.6.1.4.1.20044.63.2.1.3.42.16 | Scalarpm10010mrAlmCfpGlobAlarmAssertion | read-only | current | Client Trscv Global Alarm :This OID indicates at least one Fault or Status is detected on the Client Trscv module <Help> Synthesis alarm indicating at least on… |
| 1.3.6.1.4.1.20044.63.2.1.3.46 | Nodepm10010mrAlmmsaModuleState | |||
| 1.3.6.1.4.1.20044.63.2.1.3.46.1 | Scalarpm10010mrAlmMsaInitialize | read-only | current | Line Trscv Initialize :This OID indicates the Line Trscv initialization is in progress <Help> Status indicating the Line Trscv initialization is in progress <C… |
| 1.3.6.1.4.1.20044.63.2.1.3.46.2 | Scalarpm10010mrAlmMsaLowPower | read-only | current | Line Trscv Low Power :This OID indicates the Line Trscv is in low power state <Help> Status indicating the Line Trscv is in low power state <Condtype> MSA_LOW_… |
| 1.3.6.1.4.1.20044.63.2.1.3.46.3 | Scalarpm10010mrAlmMsaHighPowerUp | read-only | current | Line Trscv High Power Up :This OID indicates the Line Trscv is leaving Low Power state <Help> Status indicating the Line Trscv is leaving Low Power state <Cond… |
| 1.3.6.1.4.1.20044.63.2.1.3.46.4 | Scalarpm10010mrAlmMsaTxOff | read-only | current | Line Trscv Laser Shutdown :This OID indicates the Line Trscv Laser is OFF <Help> Status indicating the Line Trscv Laser is OFF <Condtype> MSA_TX_OFF <Probcause… |
| 1.3.6.1.4.1.20044.63.2.1.3.46.5 | Scalarpm10010mrAlmMsaTxTurnOn | read-only | current | Line Trscv Laser Turn On :This OID indicates the Line Trscv is turning on its laser <Help> Status indicating the Line Trscv is turning on its laser <Condtype> … |
| 1.3.6.1.4.1.20044.63.2.1.3.46.6 | Scalarpm10010mrAlmMsaReady | read-only | current | Line Trscv Ready :This OID indicates the Line Trscv is ready to operate <Help> Status indicating the Line Trscv is ready to operate <Condtype> MSA_READY <Probc… |
| 1.3.6.1.4.1.20044.63.2.1.3.46.7 | Scalarpm10010mrAlmMsaFault | read-only | current | Line Trscv Fault :This OID indicates the Line Trscv is in Fault state <Help> Status indicating the Line Trscv is in Fault state <Condtype> MSA_FAULT <Probcause… |
| 1.3.6.1.4.1.20044.63.2.1.3.46.8 | Scalarpm10010mrAlmMsaTxTurnOff | read-only | current | Line Trscv Laser Turn Off :This OID indicates the Line Trscv is turning off its laser <Help> Status indicating the Line Trscv is turning off its laser <Condtyp… |
| 1.3.6.1.4.1.20044.63.2.1.3.46.9 | Scalarpm10010mrAlmMsaHighPowerDown | read-only | current | Line Trscv High Power Down :This OID indicates the Line Trscv is entering Low Power state <Help> Status indicating the Line Trscv is entering Low Power state <… |
| 1.3.6.1.4.1.20044.63.2.1.3.47 | Nodepm10010mrAlmmsaModuleGeneralStatus | |||
| 1.3.6.1.4.1.20044.63.2.1.3.47.4 | Scalarpm10010mrAlmMsaOutOfAlignment | read-only | current | Line Trscv Out Of Alignment :This OID indicates an Out of alignment on the Line Trscv Host Interface <Help> Alarm indicating an Out of alignment on the Line Tr… |
| 1.3.6.1.4.1.20044.63.2.1.3.47.5 | Scalarpm10010mrAlmMsaRxNetworkLol | read-only | current | Line Trscv Rx Network Loss Of Lock :This OID indicates of Loss of Lock is detected on the Line Trscv Rx Network interface <Help> Alarm indicating of Loss of Lo… |
| 1.3.6.1.4.1.20044.63.2.1.3.47.6 | Scalarpm10010mrAlmMsaRxLos | read-only | current | Line Trscv Loss Of Signal :This OID indicates a Loss of Signal is detected on the Line Trscv <Help> Alarm indicating a Loss of Signal is detected on the Line T… |
| 1.3.6.1.4.1.20044.63.2.1.3.47.7 | Scalarpm10010mrAlmMsaTxHostLol | read-only | current | Line Trscv Tx Host Loss Of Lock :This OID indicates of Loss of Lock is detected on the Line Trscv Tx Host interface <Help> Alarm indicating of Loss of Lock is … |
| 1.3.6.1.4.1.20044.63.2.1.3.47.8 | Scalarpm10010mrAlmMsaTxLosf | read-only | current | Line Trscv Loss Of Signal Functionality :This OID indicates a Loss of Signal functionality is detected on the Line Trscv <Help> Alarm indicating a Loss of Sign… |
| 1.3.6.1.4.1.20044.63.2.1.3.47.9 | Scalarpm10010mrAlmMsaTxCmuLol | read-only | current | Line Trscv CMU Loss Of Lock :This OID indicates a Clock Multiplier Unit Loss of Lock is detected on the Line Trscv <Help> Alarm indicating a Clock Multiplier U… |
| 1.3.6.1.4.1.20044.63.2.1.3.47.10 | Scalarpm10010mrAlmMsaTxJitterPllLol | read-only | current | Line Trscv Tx Jitter PLL Loss Of Lock :This OID indicates a Tx Jitter PLL Loss of Lock is detected on the Line Trscv <Help> Alarm indicating a Tx Jitter PLL Lo… |
| 1.3.6.1.4.1.20044.63.2.1.3.47.11 | Scalarpm10010mrAlmMsaLossOfRefclk | read-only | current | Line Trscv Loss Of Ref Clock :This OID indicates a Loss of Reference clock is detected on the Line Trscv <Help> Alarm indicating a Loss of Reference clock is d… |
| 1.3.6.1.4.1.20044.63.2.1.3.47.14 | Scalarpm10010mrAlmMsaHwInterlock | read-only | current | Line Trscv Hardware Interlock :This OID indicates the Line Trscv power is higher than the cooling capacity <Help> Alarm indicating the Line Trscv power is high… |
| 1.3.6.1.4.1.20044.63.2.1.3.48 | Nodepm10010mrAlmmsaGlobalAlarmSummary | |||
| 1.3.6.1.4.1.20044.63.2.1.3.48.1 | Scalarpm10010mrAlmMsaSoftGlobAlarmTest | read-only | current | Line Trscv Global Alarm SW Test :This OID indicates the Line Trscv Global alarm This OID is raised by SW request for test purpose <Help> Status indicating the … |
| 1.3.6.1.4.1.20044.63.2.1.3.48.6 | Scalarpm10010mrAlmMsaNetworkHostAlarmStatus | read-only | current | Line Trscv Network/Host Alarm Status :This OID indicates the state of the Network and Host interface of the Line Trscv <Help> Synthesis alarm indicating the al… |
| 1.3.6.1.4.1.20044.63.2.1.3.48.7 | Scalarpm10010mrAlmMsaNetworkLaneAlarmWarning2 | read-only | current | Line Trscv Network Alarm And Warning 2 :This OID indicates at least one DDM This OID is detected on the Line Trscv Network Interface <Help> Synthesis alarm ind… |
| 1.3.6.1.4.1.20044.63.2.1.3.48.8 | Scalarpm10010mrAlmMsaModuleState | read-only | current | Line Trscv Module State :This OID indicates the Line Trscv module state <Help> Synthesis alarm indicating the Line Trscv module state <Condtype> MSA_MODULE_STA… |
| 1.3.6.1.4.1.20044.63.2.1.3.48.9 | Scalarpm10010mrAlmMsaModuleGeneralStatus | read-only | current | Line Trscv General Status :This OID indicates the Line Trscv module general <Help> Synthesis alarm indicating the Line Trscv module general status <Condtype> M… |
| 1.3.6.1.4.1.20044.63.2.1.3.48.10 | Scalarpm10010mrAlmModuleFault | read-only | current | Line Trscv Module Fault :This OID indicates at least one Fault is detected on the Line Trscv module <Help> Synthesis alarm indicating at least one Fault is det… |
| 1.3.6.1.4.1.20044.63.2.1.3.48.11 | Scalarpm10010mrAlmMsaModuleAlarmWarning1 | read-only | current | Line Trscv Module Alarm And Warning 1 :This OID indicates at least one DDM is detected on the Line Trscv module <Help> Synthesis alarm indicating at least one … |
| 1.3.6.1.4.1.20044.63.2.1.3.48.12 | Scalarpm10010mrAlmMsaModuleAlarmWarning2 | read-only | current | Line Trscv Module Alarm And Warning 2 :This OID indicates at least one DDM is detected on the Line Trscv module <Help> Synthesis alarm indicating at least one … |
| 1.3.6.1.4.1.20044.63.2.1.3.48.13 | Scalarpm10010mrAlmMsaNetworkLaneAlarmWarning1 | read-only | current | Line Trscv Network Alarm And Warning 1 :This OID indicates at least one DDM is detected on the Line Trscv Network Interface <Help> Synthesis alarm indicating a… |
| 1.3.6.1.4.1.20044.63.2.1.3.48.14 | Scalarpm10010mrAlmMsaNetworkLaneFaultStatus | read-only | current | Line Trscv Network Fault And Status :This OID indicates at least one Fault or Status is detected on the Line Trscv Network Interface <Help> Synthesis alarm ind… |
| 1.3.6.1.4.1.20044.63.2.1.3.48.15 | Scalarpm10010mrAlmMsaHostLaneFaultStatus | read-only | current | Line Trscv Host Fault And Status :This OID indicates at least one Fault or Status is detected on the Line Trscv Host Interface <Help> Synthesis alarm indicatin… |
| 1.3.6.1.4.1.20044.63.2.1.3.48.16 | Scalarpm10010mrAlmMsaGlobAlarmAssertion | read-only | current | Line Trscv Global Alarm :This OID indicates at least one Fault or Status is detected on the Line Trscv module <Help> Synthesis alarm indicating at least one Al… |
| 1.3.6.1.4.1.20044.63.2.1.3.49 | Nodepm10010mrAlmmsaNetworkTxAlignment | |||
| 1.3.6.1.4.1.20044.63.2.1.3.49.12 | Scalarpm10010mrAlmNetTxTimingFault | read-only | current | Line Trscv Network Tx Timing Fault :This OID indicates a Tx Timing Fault is detected on the Line Trscv Network interface <Help> Alarm indicating a Tx Timing Fa… |
| 1.3.6.1.4.1.20044.63.2.1.3.49.13 | Scalarpm10010mrAlmNetTxReferenceClockFault | read-only | current | Line Trscv Network Tx Ref Clock Fault :This OID indicates a Tx Reference Clock Fault is detected on the Line Trscv Network interface <Help> Alarm indicating a … |
| 1.3.6.1.4.1.20044.63.2.1.3.49.14 | Scalarpm10010mrAlmNetTxCmuLockFault | read-only | current | Line Trscv Network Tx CMU Lock Fault :This OID indicates a Tx Clock Multiplier Unit Lock Fault is detected on the Line Trscv Network interface <Help> Alarm ind… |
| 1.3.6.1.4.1.20044.63.2.1.3.49.15 | Scalarpm10010mrAlmNetTxOutOfAlignment | read-only | current | Line Trscv Network Tx Out Of Alignment :This OID indicates a Tx Out of Alignment is detected on the Line Trscv Network interface <Help> Alarm indicating a Tx O… |
| 1.3.6.1.4.1.20044.63.2.1.3.49.16 | Scalarpm10010mrAlmNetTxLossOfAlignment | read-only | current | Line Trscv Network Tx Loss Of Alignment :This OID indicates a Tx Loss of Alignment is detected on the Line Trscv Network interface <Help> Alarm indicating a Tx… |
| 1.3.6.1.4.1.20044.63.2.1.3.50 | Nodepm10010mrAlmmsaNetworkRxAlignment | |||
| 1.3.6.1.4.1.20044.63.2.1.3.50.12 | Scalarpm10010mrAlmNetRxTimingFault | read-only | current | Line Trscv Network Rx Timing Fault :This OID indicates a Rx Timing Fault is detected on the Line Trscv Network interface <Help> Alarm indicating a Rx Timing Fa… |
| 1.3.6.1.4.1.20044.63.2.1.3.50.13 | Scalarpm10010mrAlmNetRxOutOfAlignment | read-only | current | Line Trscv Network Rx Out Of Alignment :This OID indicates a Rx Out of Alignment is detected on the Line Trscv Network interface <Help> Alarm indicating a Rx O… |
| 1.3.6.1.4.1.20044.63.2.1.3.50.14 | Scalarpm10010mrAlmNetRxLossOfAlignment | read-only | current | Line Trscv Network Rx Loss Of Alignment :This OID indicates a Rx Loss of Alignment is detected on the Line Trscv Network interface <Help> Alarm indicating a Rx… |
| 1.3.6.1.4.1.20044.63.2.1.3.50.15 | Scalarpm10010mrAlmNetRxModemLockFault | read-only | current | Line Trscv Network Rx Modem Lock Fault :This OID indicates a Rx Modem Lock Fault is detected on the Line Trscv Network interface <Help> Alarm indicating a Rx M… |
| 1.3.6.1.4.1.20044.63.2.1.3.50.16 | Scalarpm10010mrAlmNetRxModemSyncDetectFault | read-only | current | Line Trscv Network Rx Modem Sync Detect Fault :This OID indicates a Rx Modem Synchronisation Detection Fault is detected on the Line Trscv Network interface <H… |
| 1.3.6.1.4.1.20044.63.2.1.3.51 | Nodepm10010mrAlmmsaNetworkHostNetworkAlarmSummary | |||
| 1.3.6.1.4.1.20044.63.2.1.3.51.11 | Scalarpm10010mrAlmNetworkTxAlignment | read-only | current | Line Trscv Network Tx Alignment :This OID indicates a Tx Alignment Fault is detected on the Line Trscv Network interface <Help> Synthesis Alarm indicating a Tx… |
| 1.3.6.1.4.1.20044.63.2.1.3.51.12 | Scalarpm10010mrAlmNetworkRxAlignment | read-only | current | Line Trscv Network Rx Alignment :This OID indicates a Rx Alignment Fault is detected on the Line Trscv Network interface <Help> Synthesis Alarm indicating a Rx… |
| 1.3.6.1.4.1.20044.63.2.1.3.51.13 | Scalarpm10010mrAlmNetworkRxOtn | read-only | current | Line Trscv Network Rx OTN :This OID indicates a Rx OTN Fault is detected on the Line Trscv Network interface <Help> Synthesis Alarm indicating a Rx OTN Fault i… |
| 1.3.6.1.4.1.20044.63.2.1.3.51.14 | Scalarpm10010mrAlmHostRxAlignment | read-only | current | Line Trscv Host Rx Alignment :This OID indicates a Rx Alignment Fault is detected on the Line Trscv Host interface <Help> Synthesis Alarm indicating a Rx Align… |
| 1.3.6.1.4.1.20044.63.2.1.3.51.15 | Scalarpm10010mrAlmHostTxAlignment | read-only | current | Line Trscv Host Tx Alignment :This OID indicates a Tx Alignment Fault is detected on the Line Trscv Host interface <Help> Synthesis Alarm indicating a Tx Align… |
| 1.3.6.1.4.1.20044.63.2.1.3.51.16 | Scalarpm10010mrAlmHostTxOtnStatus | read-only | current | Line Trscv Host Tx OTN :This OID indicates a Tx OTN Fault is detected on the Line Trscv Host interface <Help> Synthesis Alarm indicating a Tx OTN Fault is dete… |
| 1.3.6.1.4.1.20044.63.2.1.3.52 | Nodepm10010mrAlmmsaHostTxAlignment | |||
| 1.3.6.1.4.1.20044.63.2.1.3.52.13 | Scalarpm10010mrAlmHostTxDeskewLockFault | read-only | current | Line Trscv Host Tx Deskew Lock Fault :This OID indicates a Tx Deskew Lock Fault is detected on the Line Trscv Host interface <Help> Alarm indicating a Tx Deske… |
| 1.3.6.1.4.1.20044.63.2.1.3.52.14 | Scalarpm10010mrAlmHostTxOutOfAlignment | read-only | current | Line Trscv Host Tx Out Of Alignment :This OID indicates a Tx Out of Alignment is detected on the Line Trscv Host interface <Help> Alarm indicating a Tx Out of … |
| 1.3.6.1.4.1.20044.63.2.1.3.52.15 | Scalarpm10010mrAlmHostTxLossOfAlignment | read-only | current | Line Trscv Host Tx Loss Of Alignment :This OID indicates a Tx Loss of Alignment is detected on the Line Trscv Host interface <Help> Alarm indicating a Tx Loss … |
| 1.3.6.1.4.1.20044.63.2.1.3.52.16 | Scalarpm10010mrAlmHostTxCdrLockFault | read-only | current | Line Trscv Host Tx CDR Lock Fault :This OID indicates a Tx Clock Data Recovery Lock Fault is detected on the Line Trscv Host interface <Help> Alarm indicating … |
| 1.3.6.1.4.1.20044.63.2.1.3.53 | Nodepm10010mrAlmmsaHostRxAlignment | |||
| 1.3.6.1.4.1.20044.63.2.1.3.53.14 | Scalarpm10010mrAlmHostRxCmuLockFault | read-only | current | Line Trscv Host Rx CMU Lock Fault :This OID indicates a Rx Clock Multiplier Unit Lock Fault is detected on the Line Trscv Host interface <Help> Alarm indicatin… |
| 1.3.6.1.4.1.20044.63.2.1.3.53.15 | Scalarpm10010mrAlmHostRxOutOfAlignment | read-only | current | Line Trscv Host Rx Out Of Alignment :This OID indicates a Rx Out of Alignment is detected on the Line Trscv Host interface <Help> Alarm indicating a Rx Out of … |
| 1.3.6.1.4.1.20044.63.2.1.3.53.16 | Scalarpm10010mrAlmHostRxLossOfAlignment | read-only | current | Line Trscv Host Rx Loss Of Alignment :This OID indicates a Rx Loss of Alignment is detected on the Line Trscv Host interface <Help> Alarm indicating a Rx Loss … |
| 1.3.6.1.4.1.20044.63.2.2 | Nodepm10010mrAlmClient | |||
| 1.3.6.1.4.1.20044.63.2.2.1 | Nodepm10010mrAlmClientNurg | |||
| 1.3.6.1.4.1.20044.63.2.2.1.56 | Tablepm10010mrAlmclientNetworkLaneAlarmWarningTable | not-accessible | current | List of pm10010mrAlmclientNetworkLaneAlarmWarning Article |
| 1.3.6.1.4.1.20044.63.2.2.1.56.1 | Rowpm10010mrAlmclientNetworkLaneAlarmWarningEntry | not-accessible | current | Row definition for the pm10010mrAlmclientNetworkLaneAlarmWarning table |
| 1.3.6.1.4.1.20044.63.2.2.1.56.1.1 | Columnpm10010mrAlmclientNetworkLaneAlarmWarningIndex | read-only | current | Index definition for the pm10010mrAlmclientNetworkLaneAlarmWarning table |
| 1.3.6.1.4.1.20044.63.2.2.1.56.1.2 | Columnpm10010mrAlmClientRxPowerLowAlarmPortn | read-only | current | Client Trscv Rx Power Low Alarm :This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indic… |
| 1.3.6.1.4.1.20044.63.2.2.1.56.1.3 | Columnpm10010mrAlmClientRxPowerLowWarningPortn | read-only | current | Client Trscv Rx Power Low Warning :This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM <Help> Warning i… |
| 1.3.6.1.4.1.20044.63.2.2.1.56.1.4 | Columnpm10010mrAlmClientRxPowerHighWarningPortn | read-only | current | Client Trscv Rx Power High Warning :This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM <Help> Warning… |
| 1.3.6.1.4.1.20044.63.2.2.1.56.1.5 | Columnpm10010mrAlmClientRxPowerHighAlarmPortn | read-only | current | Client Trscv Rx Power High Alarm :This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM <Help> Alarm ind… |
| 1.3.6.1.4.1.20044.63.2.2.1.56.1.6 | Columnpm10010mrAlmLaserTempLowAlarmPortn | read-only | current | Client Trscv Laser Temp Low Alarm :This OID indicates that the Trscv Laser Temperature is lower than the threshold value written in the Trscv EEPROM <Help> Ala… |
| 1.3.6.1.4.1.20044.63.2.2.1.56.1.7 | Columnpm10010mrAlmClientLaserTempLowWarningPortn | read-only | current | Client Trscv Laser Temp Low Warning :This OID indicates that the Trscv Laser Temperature is lower than the threshold value written in the Trscv EEPROM <Help> W… |
| 1.3.6.1.4.1.20044.63.2.2.1.56.1.8 | Columnpm10010mrAlmClientLaserTempHighWarningPortn | read-only | current | Client Trscv Laser Temp High Warning :This OID indicates that the Trscv Laser Temperature is higher than the threshold value written in the Trscv EEPROM <Help>… |
| 1.3.6.1.4.1.20044.63.2.2.1.56.1.9 | Columnpm10010mrAlmClientLaserTempHighAlarmPortn | read-only | current | Client Trscv Laser Temp High Alarm :This OID indicates that the Trscv Laser Temperature is higher than the threshold value written in the Trscv EEPROM <Help> A… |
| 1.3.6.1.4.1.20044.63.2.2.1.56.1.10 | Columnpm10010mrAlmClientTxPowerLowAlarmPortn | read-only | current | Client Trscv Tx Power Low Alarm :This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indi… |
| 1.3.6.1.4.1.20044.63.2.2.1.56.1.11 | Columnpm10010mrAlmClientTxPowerLowWarningPortn | read-only | current | Client Trscv Tx Power Low Warning :This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM <Help> Warning … |
| 1.3.6.1.4.1.20044.63.2.2.1.56.1.12 | Columnpm10010mrAlmClientTxPowerHighWarningPortn | read-only | current | Client Trscv Tx Power High Warning :This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM <Help> Warnin… |
| 1.3.6.1.4.1.20044.63.2.2.1.56.1.13 | Columnpm10010mrAlmClientTxPowerHighAlarmPortn | read-only | current | Client Trscv Tx Power High Alarm :This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM <Help> Alarm in… |
| 1.3.6.1.4.1.20044.63.2.2.1.56.1.14 | Columnpm10010mrAlmClientBiasLowAlarmPortn | read-only | current | Client Trscv Bias Low Alarm :This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Alarm in… |
| 1.3.6.1.4.1.20044.63.2.2.1.56.1.15 | Columnpm10010mrAlmClientBiasLowWarningPortn | read-only | current | Client Trscv Bias Low Warning :This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Warnin… |
| 1.3.6.1.4.1.20044.63.2.2.1.56.1.16 | Columnpm10010mrAlmClientBiasHighWarningPortn | read-only | current | Client Trscv Bias High Warning :This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Warn… |
| 1.3.6.1.4.1.20044.63.2.2.1.56.1.17 | Columnpm10010mrAlmClientBiasHighAlarmPortn | read-only | current | Client Trscv Bias High Alarm :This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Alarm … |
| 1.3.6.1.4.1.20044.63.2.2.1.232 | Tablepm10010mrAlmclientSfpWarnDdmTable | not-accessible | current | List of pm10010mrAlmclientSfpWarnDdm Article |
| 1.3.6.1.4.1.20044.63.2.2.1.232.1 | Rowpm10010mrAlmclientSfpWarnDdmEntry | not-accessible | current | Row definition for the pm10010mrAlmclientSfpWarnDdm table |
| 1.3.6.1.4.1.20044.63.2.2.1.232.1.1 | Columnpm10010mrAlmclientSfpWarnDdmIndex | read-only | current | Index definition for the pm10010mrAlmclientSfpWarnDdm table |
| 1.3.6.1.4.1.20044.63.2.2.1.232.1.2 | Columnpm10010mrAlmTxPwLowWngPortn | read-only | current | Client Trscv Tx Power Low Warning :This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM <Help> Warning … |
| 1.3.6.1.4.1.20044.63.2.2.1.232.1.3 | Columnpm10010mrAlmTxPwrHighWngPortn | read-only | current | Client Trscv Tx Power High Warning :This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM <Help> Warnin… |
| 1.3.6.1.4.1.20044.63.2.2.1.232.1.4 | Columnpm10010mrAlmTxBiasLowWngPortn | read-only | current | Client Trscv Bias Low Warning :This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Warnin… |
| 1.3.6.1.4.1.20044.63.2.2.1.232.1.5 | Columnpm10010mrAlmTxBiasHighWngPortn | read-only | current | Client Trscv Bias High Warning :This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Warn… |
| 1.3.6.1.4.1.20044.63.2.2.1.232.1.6 | Columnpm10010mrAlmVccLowWngPortn | read-only | current | Client Trscv Power Supply Low Warning :This OID indicates that the Trscv power supply is lower than the threshold value written in the Trscv EEPROM <Help> Warn… |
| 1.3.6.1.4.1.20044.63.2.2.1.232.1.7 | Columnpm10010mrAlmVccHighWngPortn | read-only | current | Client Trscv Power Supply High Warning :This OID indicates that the Trscv power supply is higher than the threshold value written in the Trscv EEPROM <Help> Wa… |
| 1.3.6.1.4.1.20044.63.2.2.1.232.1.8 | Columnpm10010mrAlmTempLowWngPortn | read-only | current | Client Trscv Temp Low Warning :This OID indicates that the Trscv temperature is lower than the threshold value written in the Trscv EEPROM <Help> Warning indic… |
| 1.3.6.1.4.1.20044.63.2.2.1.232.1.9 | Columnpm10010mrAlmTempHighWngPortn | read-only | current | Client Trscv Temp High Warning :This OID indicates that the Trscv temperature is higher than the threshold value written in the Trscv EEPROM <Help> Warning ind… |
| 1.3.6.1.4.1.20044.63.2.2.1.232.1.16 | Columnpm10010mrAlmRxPwrLowWngPortn | read-only | current | Client Trscv Rx Power Low Warning :This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM <Help> Warning i… |
| 1.3.6.1.4.1.20044.63.2.2.1.232.1.17 | Columnpm10010mrAlmRxPwrHighWngPortn | read-only | current | Client Trscv Rx Power High Warning :This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM <Help> Warning… |
| 1.3.6.1.4.1.20044.63.2.2.2 | Nodepm10010mrAlmClientUrg | |||
| 1.3.6.1.4.1.20044.63.2.2.2.72 | Tablepm10010mrAlmclientNetworkLaneFaultTable | not-accessible | current | List of pm10010mrAlmclientNetworkLaneFault Article |
| 1.3.6.1.4.1.20044.63.2.2.2.72.1 | Rowpm10010mrAlmclientNetworkLaneFaultEntry | not-accessible | current | Row definition for the pm10010mrAlmclientNetworkLaneFault table |
| 1.3.6.1.4.1.20044.63.2.2.2.72.1.1 | Columnpm10010mrAlmclientNetworkLaneFaultIndex | read-only | current | Index definition for the pm10010mrAlmclientNetworkLaneFault table |
| 1.3.6.1.4.1.20044.63.2.2.2.72.1.4 | Columnpm10010mrAlmClientLaneRxFifoErrorPortn | read-only | current | Client Network Lane Rx FIFO Error :This OID indicates a Rx FIFO Error on the Client Trscv Network Lane <Help> Alarm indicating a Rx FIFO Error on the Client Tr… |
| 1.3.6.1.4.1.20044.63.2.2.2.72.1.5 | Columnpm10010mrAlmClientLaneRxLolPortn | read-only | current | Client Network Lane Rx Loss Of Lock :This OID indicates a Rx Loss of Lock on the Client Trscv Network Lane <Help> Alarm indicating a Rx Loss of Lock on the Cli… |
| 1.3.6.1.4.1.20044.63.2.2.2.72.1.6 | Columnpm10010mrAlmClientLaneRxLosPortn | read-only | current | Client Network Lane Rx Loss Of Signal :This OID indicates a Rx Loss of Signal on the Client Trscv Network Lane <Help> Alarm indicating a Rx Loss of Signal on t… |
| 1.3.6.1.4.1.20044.63.2.2.2.72.1.8 | Columnpm10010mrAlmClientLaneTxLolPortn | read-only | current | Client Network Lane Tx Loss Of Lock :This OID indicates a Tx Loss of Lock on the Client Trscv Network Lane <Help> Alarm indicating a Tx Loss of Lock on the Cli… |
| 1.3.6.1.4.1.20044.63.2.2.2.72.1.9 | Columnpm10010mrAlmClientLaneTxLosfPortn | read-only | current | Client Network Lane Tx Loss Of Signal Functionality :This OID indicates a Tx Loss of Signal Functionality on the Client Trscv Network Lane <Help> Alarm indicat… |
| 1.3.6.1.4.1.20044.63.2.2.2.72.1.15 | Columnpm10010mrAlmClientLaneApdPowerSupplyPortn | read-only | current | Client Network Lane APD Power Supply :This OID indicates an APD Power supply failure on the Client Trscv Network Lane <Help> Alarm indicating an APD Power supp… |
| 1.3.6.1.4.1.20044.63.2.2.2.72.1.16 | Columnpm10010mrAlmClientLaneWavelengthUnlockedPortn | read-only | current | Client Network Lane Wavelength Unlock :This OID indicates a Wavelength unlock on the Client Trscv Network Lane <Help> Alarm indicating a Wavelength unlock on t… |
| 1.3.6.1.4.1.20044.63.2.2.2.72.1.17 | Columnpm10010mrAlmClientLaneTecFaultPortn | read-only | current | Client Network Lane TEC Fault :This OID indicates a TEC Fault on the Client Trscv Network Lane <Help> Alarm indicating a TEC Fault on the Client Trscv Network … |
| 1.3.6.1.4.1.20044.63.2.2.2.88 | Tablepm10010mrAlmclientHostLaneFaultTable | not-accessible | current | List of pm10010mrAlmclientHostLaneFault Article |
| 1.3.6.1.4.1.20044.63.2.2.2.88.1 | Rowpm10010mrAlmclientHostLaneFaultEntry | not-accessible | current | Row definition for the pm10010mrAlmclientHostLaneFault table |
| 1.3.6.1.4.1.20044.63.2.2.2.88.1.1 | Columnpm10010mrAlmclientHostLaneFaultIndex | read-only | current | Index definition for the pm10010mrAlmclientHostLaneFault table |
| 1.3.6.1.4.1.20044.63.2.2.2.88.1.2 | Columnpm10010mrAlmClientLossOfSyncPortn | read-only | current | Client Frame Alignment Loss :This OID indicates the module is not aligned with the incoming Client signal <Help> Alarm indicating the module is not aligned wit… |
| 1.3.6.1.4.1.20044.63.2.2.2.88.1.3 | Columnpm10010mrAlmClientInputLossOfSigPortn | read-only | current | Client Input Loss Of Signal :This OID indicates a Loss of Signal is detected on the Client Trscv <Help> Alarm indicating a Loss of Signal is detected on the Cl… |
| 1.3.6.1.4.1.20044.63.2.2.2.88.1.4 | Columnpm10010mrAlmClientLanesMarkerUnlockPortn | read-only | current | Client Lanes Marker Unlock :This OID indicates the Client lanes marker alignment is not lock <Help> Alarm indicating the Client lanes marker alignment is not l… |
| 1.3.6.1.4.1.20044.63.2.2.2.88.1.5 | Columnpm10010mrAlmClientLanes6466UnlockPortn | read-only | current | Client Lanes 64/66b Unlock :This OID indicates the Client 64/66b decoder is not lock <Help> Alarm indicating the Client 64/66b decoder is not lock <Condtype> C… |
| 1.3.6.1.4.1.20044.63.2.2.2.88.1.6 | Columnpm10010mrAlmClientLanesNotAlignedPortn | read-only | current | Client Lanes Not Aligned :This OID indicates the Client lanes are not aligned <Help> Alarm indicating the Client lanes are not aligned <Condtype> CLIENT_LANES_… |
| 1.3.6.1.4.1.20044.63.2.2.2.88.1.7 | Columnpm10010mrAlmClientCsfDetectedPortn | read-only | current | Client Signal Fail Detected :This OID indicates that a CSF has been detected on client port in the downstream direction <Help> This alarm indicates if a Client… |
| 1.3.6.1.4.1.20044.63.2.2.2.88.1.10 | Columnpm10010mrAlmClientTxHostLolPortn | read-only | current | Client Host Lane Tx Loss Of Lock :This OID indicates a Tx Loss of Lock on the Client Trscv Host Lane <Help> Alarm indicating a Tx Loss of Lock on the Client Tr… |
| 1.3.6.1.4.1.20044.63.2.2.2.88.1.11 | Columnpm10010mrAlmClientLaneTxFifoErrorPortn | read-only | current | Client Host Lane Tx FIFO Error :This OID indicates a Tx FIFO Error on the Client Trscv Host Lane <Help> Alarm indicating a Tx FIFO Error on the Client Trscv Ho… |
| 1.3.6.1.4.1.20044.63.2.2.2.88.1.12 | Columnpm10010mrAlmLfDetectedPortn | read-only | current | Local Fault Signal Detected :This OID indicates a Local Fault Signal is detected on the client input port<Help> This alarm indicates a Local Fault Signal is de… |
| 1.3.6.1.4.1.20044.63.2.2.2.88.1.13 | Columnpm10010mrAlmRfDetectedPortn | read-only | current | Remote Fault Signal Detected :This OID indicates a Remote Fault Signal is detected on the client input port<Help> This alarm indicates a Remote Fault Signal is… |
| 1.3.6.1.4.1.20044.63.2.2.2.216 | Tablepm10010mrAlmclientSfpAlmDdmTable | not-accessible | current | List of pm10010mrAlmclientSfpAlmDdm Article |
| 1.3.6.1.4.1.20044.63.2.2.2.216.1 | Rowpm10010mrAlmclientSfpAlmDdmEntry | not-accessible | current | Row definition for the pm10010mrAlmclientSfpAlmDdm table |
| 1.3.6.1.4.1.20044.63.2.2.2.216.1.1 | Columnpm10010mrAlmclientSfpAlmDdmIndex | read-only | current | Index definition for the pm10010mrAlmclientSfpAlmDdm table |
| 1.3.6.1.4.1.20044.63.2.2.2.216.1.2 | Columnpm10010mrAlmTxPwrLowAlaPortn | read-only | current | Client Trscv Tx Power Low :This OID indicates that the Trscv output power of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm in… |
| 1.3.6.1.4.1.20044.63.2.2.2.216.1.3 | Columnpm10010mrAlmTxPwrHighAlaPortn | read-only | current | Client Trscv Tx Power High :This OID indicates that the Trscv output power of port is higher than the threshold value written in the Trscv EEPROM <Help> Alarm … |
| 1.3.6.1.4.1.20044.63.2.2.2.216.1.4 | Columnpm10010mrAlmTxBiasLowAlaPortn | read-only | current | Client Trscv Bias Low :This OID indicates that the Trscv laser bias current of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm … |
| 1.3.6.1.4.1.20044.63.2.2.2.216.1.5 | Columnpm10010mrAlmTxBiasHighAlaPortn | read-only | current | Client Trscv Bias High :This OID indicates that the Trscv laser bias current of port is higher than the threshold value written in the Trscv EEPROM <Help> Alar… |
| 1.3.6.1.4.1.20044.63.2.2.2.216.1.6 | Columnpm10010mrAlmVccLowAlaPortn | read-only | current | Client Trscv Power Supply Low :This OID indicates that the Trscv power supply of port is lower than the threshold value written in the Trscv EEPROM <Help> Alar… |
| 1.3.6.1.4.1.20044.63.2.2.2.216.1.7 | Columnpm10010mrAlmVccHighAlaPortn | read-only | current | Client Trscv Power Supply High :This OID indicates that the Trscv power supply of port is higher than the threshold value written in the Trscv EEPROM <Help> Al… |
| 1.3.6.1.4.1.20044.63.2.2.2.216.1.8 | Columnpm10010mrAlmTempLowAlaPortn | read-only | current | Client Trscv Temp Low :This OID indicates that the Trscv temperature of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicat… |
| 1.3.6.1.4.1.20044.63.2.2.2.216.1.9 | Columnpm10010mrAlmTempHighAlaPortn | read-only | current | Client Trscv Temp High :This OID indicates that the Trscv temperature of port is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indic… |
| 1.3.6.1.4.1.20044.63.2.2.2.216.1.16 | Columnpm10010mrAlmRxPwrLowAlaPortn | read-only | current | Client Trscv Rx Power Low :This OID indicates that the Trscv input power of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm ind… |
| 1.3.6.1.4.1.20044.63.2.2.2.216.1.17 | Columnpm10010mrAlmRxPwrHighAlaPortn | read-only | current | Client Trscv Rx Power High :This OID indicates that the Trscv input power of port is higher than the threshold value written in the Trscv EEPROM <Help> Alarm i… |
| 1.3.6.1.4.1.20044.63.2.2.3 | Nodepm10010mrAlmClientCrit | |||
| 1.3.6.1.4.1.20044.63.2.2.3.8 | Tablepm10010mrAlmsynthAlmPortTable | not-accessible | current | List of pm10010mrAlmsynthAlmPort Article |
| 1.3.6.1.4.1.20044.63.2.2.3.8.1 | Rowpm10010mrAlmsynthAlmPortEntry | not-accessible | current | Row definition for the pm10010mrAlmsynthAlmPort table |
| 1.3.6.1.4.1.20044.63.2.2.3.8.1.1 | Columnpm10010mrAlmsynthAlmPortIndex | read-only | current | Index definition for the pm10010mrAlmsynthAlmPort table |
| 1.3.6.1.4.1.20044.63.2.2.3.8.1.2 | Columnpm10010mrAlmSfpAbsentPortn | read-only | current | Client Optical Module Absent :This OID indicates that the Transceiver is not present in the client port. <Help> This alarm indicates if the client transceiver … |
| 1.3.6.1.4.1.20044.63.2.2.3.8.1.3 | Columnpm10010mrAlmDdmAbsentPortn | read-only | current | DDM Supported On Client Trscv :This OID indicates that the Client transceiver supports the Digital Diagnostic Monitoring function <Help> This status indicates … |
| 1.3.6.1.4.1.20044.63.2.2.3.8.1.5 | Columnpm10010mrAlmHwFailAccPortn | read-only | current | Client HW Fail :This OID indicates a failure on client port, most probably caused by a HW issue. <Help> This alarm indicates a failure on client port, most pro… |
| 1.3.6.1.4.1.20044.63.2.2.3.8.1.6 | Columnpm10010mrAlmDwLsdPortn | read-only | current | Client Trscv Laser Shutdown :This OID indicates the Client transceiver laser is shutdown <Help> This status indicates if the client transceiver laser is shutdo… |
| 1.3.6.1.4.1.20044.63.2.2.3.8.1.7 | Columnpm10010mrAlmClientLocalOosPortn | read-only | current | Local Client Port In Service :This OID indicates that the local Client port is In Service (1) or Out of Service (2) <Help> This status indicates if the local c… |
| 1.3.6.1.4.1.20044.63.2.2.3.8.1.8 | Columnpm10010mrAlmClientRemoteOosPortn | read-only | current | Remote Client Port In Service :This OID indicates that the remote Client port is In Service (1) or Out of Service (2) <Help> This status indicates if the remot… |
| 1.3.6.1.4.1.20044.63.2.2.3.8.1.9 | Columnpm10010mrAlmDwCaisPortn | read-only | current | Client AIS Inserted :This OID indicates a CAIS has been inserted on the output client port. <Help> This status indicates if a Client Alarm Indication Signal is… |
| 1.3.6.1.4.1.20044.63.2.2.3.8.1.10 | Columnpm10010mrAlmSfpDdmWarningPortn | read-only | current | Warning On Client Trscv DDM :This OID indicates a warning is being received from the Client Transceiver DDM <Help> This alarm indicates if a DDM Warning has be… |
| 1.3.6.1.4.1.20044.63.2.2.3.8.1.11 | Columnpm10010mrAlmSfpDdmAlmPortn | read-only | current | Alarm On Client Trscv DDM :This OID indicates an alarm is being received from the Client Transceiver DDM <Help> This alarm indicates if a DDM Alarm has been de… |
| 1.3.6.1.4.1.20044.63.2.2.3.8.1.12 | Columnpm10010mrAlmIdleInsertedPortn | read-only | current | Idle Inserted :This OID indicates the client output stream is replaced by IDLE<Help> This alarm indicates the client output stream is replaced by IDLE <Condtyp… |
| 1.3.6.1.4.1.20044.63.2.2.3.8.1.13 | Columnpm10010mrAlmFailAccPortn | read-only | current | Client Access Fail :This OID indicates a failure on the Client port <Help> This alarm indicates a failure on the Client port <Condtype> FAIL_ACC_1 <Probcause> … |
| 1.3.6.1.4.1.20044.63.2.2.3.8.1.17 | Columnpm10010mrAlmUpCsfPortn | read-only | current | Client Signal Fail Inserted :This OID indicates a CSF has been inserted in the upstream client port. <Help> This status indicates if a Client Signal Fail is cu… |
| 1.3.6.1.4.1.20044.63.2.3 | Nodepm10010mrAlmLine | |||
| 1.3.6.1.4.1.20044.63.2.3.1 | Nodepm10010mrAlmLineNurg | |||
| 1.3.6.1.4.1.20044.63.2.3.1.104 | Tablepm10010mrAlmlineNetworkLaneAlarmWarning1Table | not-accessible | current | List of pm10010mrAlmlineNetworkLaneAlarmWarning1 Article |
| 1.3.6.1.4.1.20044.63.2.3.1.104.1 | Rowpm10010mrAlmlineNetworkLaneAlarmWarning1Entry | not-accessible | current | Row definition for the pm10010mrAlmlineNetworkLaneAlarmWarning1 table |
| 1.3.6.1.4.1.20044.63.2.3.1.104.1.1 | Columnpm10010mrAlmlineNetworkLaneAlarmWarning1Index | read-only | current | Index definition for the pm10010mrAlmlineNetworkLaneAlarmWarning1 table |
| 1.3.6.1.4.1.20044.63.2.3.1.104.1.2 | Columnpm10010mrAlmLineRxPowerLowAlarmPortn | read-only | current | Line Trscv Rx Power Low Alarm :This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicat… |
| 1.3.6.1.4.1.20044.63.2.3.1.104.1.3 | Columnpm10010mrAlmLineRxPowerLowWarningPortn | read-only | current | Line Trscv Rx Power Low Warning :This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM <Help> Warning ind… |
| 1.3.6.1.4.1.20044.63.2.3.1.104.1.4 | Columnpm10010mrAlmLineRxPowerHighWarningPortn | read-only | current | Line Trscv Rx Power High Warning :This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM <Help> Warning i… |
| 1.3.6.1.4.1.20044.63.2.3.1.104.1.5 | Columnpm10010mrAlmLineRxPowerHighAlarmPortn | read-only | current | Line Trscv Rx Power High Alarm :This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indic… |
| 1.3.6.1.4.1.20044.63.2.3.1.104.1.6 | Columnpm10010mrAlmLineLaserTempLowAlarmPortn | read-only | current | Line Trscv Tx Laser Temp Low Alarm :This OID indicates that the Trscv Tx Laser Temperature is lower than the threshold value written in the Trscv EEPROM <Help>… |
| 1.3.6.1.4.1.20044.63.2.3.1.104.1.7 | Columnpm10010mrAlmLineLaserTempLowWarningPortn | read-only | current | Line Trscv Tx Laser Temp Low Warning :This OID indicates that the Trscv Tx Laser Temperature is lower than the threshold value written in the Trscv EEPROM <Hel… |
| 1.3.6.1.4.1.20044.63.2.3.1.104.1.8 | Columnpm10010mrAlmLineLaserTempHighWarningPortn | read-only | current | Line Trscv Tx Laser Temp High Warning :This OID indicates that the Trscv Tx Laser Temperature is higher than the threshold value written in the Trscv EEPROM <H… |
| 1.3.6.1.4.1.20044.63.2.3.1.104.1.9 | Columnpm10010mrAlmLineLaserTempHighAlarmPortn | read-only | current | Line Trscv Tx Laser Temp High Alarm :This OID indicates that the Trscv Tx Laser Temperature is higher than the threshold value written in the Trscv EEPROM <Hel… |
| 1.3.6.1.4.1.20044.63.2.3.1.104.1.10 | Columnpm10010mrAlmLineTxPowerLowAlarmPortn | read-only | current | Line Trscv Tx Power Low Alarm :This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indica… |
| 1.3.6.1.4.1.20044.63.2.3.1.104.1.11 | Columnpm10010mrAlmLineTxPowerLowWarningPortn | read-only | current | Line Trscv Tx Power Low Warning :This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM <Help> Warning in… |
| 1.3.6.1.4.1.20044.63.2.3.1.104.1.12 | Columnpm10010mrAlmLineTxPowerHighWarningPortn | read-only | current | Line Trscv Tx Power High Warning :This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM <Help> Warning … |
| 1.3.6.1.4.1.20044.63.2.3.1.104.1.13 | Columnpm10010mrAlmLineTxPowerHighAlarmPortn | read-only | current | Line Trscv Tx Power High Alarm :This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indi… |
| 1.3.6.1.4.1.20044.63.2.3.1.104.1.14 | Columnpm10010mrAlmLineBiasLowAlarmPortn | read-only | current | Line Trscv Tx Bias Low Alarm :This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Alarm i… |
| 1.3.6.1.4.1.20044.63.2.3.1.104.1.15 | Columnpm10010mrAlmLineBiasLowWarningPortn | read-only | current | Line Trscv Tx Bias Low Warning :This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Warni… |
| 1.3.6.1.4.1.20044.63.2.3.1.104.1.16 | Columnpm10010mrAlmLineBiasHighWarningPortn | read-only | current | Line Trscv Tx Bias High Warning :This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> War… |
| 1.3.6.1.4.1.20044.63.2.3.1.104.1.17 | Columnpm10010mrAlmLineBiasHighAlarmPortn | read-only | current | Line Trscv Tx Bias High Alarm :This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Alarm… |
| 1.3.6.1.4.1.20044.63.2.3.1.120 | Tablepm10010mrAlmlineNetworkLaneAlarmWarning2Table | not-accessible | current | List of pm10010mrAlmlineNetworkLaneAlarmWarning2 Article |
| 1.3.6.1.4.1.20044.63.2.3.1.120.1 | Rowpm10010mrAlmlineNetworkLaneAlarmWarning2Entry | not-accessible | current | Row definition for the pm10010mrAlmlineNetworkLaneAlarmWarning2 table |
| 1.3.6.1.4.1.20044.63.2.3.1.120.1.1 | Columnpm10010mrAlmlineNetworkLaneAlarmWarning2Index | read-only | current | Index definition for the pm10010mrAlmlineNetworkLaneAlarmWarning2 table |
| 1.3.6.1.4.1.20044.63.2.3.1.120.1.2 | Columnpm10010mrAlmTxModulatorBiasLowAlarmPortn | read-only | current | Line Trscv Tx Modulator Bias Low Alarm :This OID indicates that the Trscv Tx modulator bias current is lower than the threshold value written in the Trscv EEPR… |
| 1.3.6.1.4.1.20044.63.2.3.1.120.1.3 | Columnpm10010mrAlmTxModulatorBiasLowWarningPortn | read-only | current | Line Trscv Tx Modulator Bias Low Warning :This OID indicates that the Trscv Tx modulator bias current is lower than the threshold value written in the Trscv EE… |
| 1.3.6.1.4.1.20044.63.2.3.1.120.1.4 | Columnpm10010mrAlmTxModulatorBiasHighWarningPortn | read-only | current | Line Trscv Tx Modulator Bias High Warning :This OID indicates that the Trscv Tx modulator bias current is higher than the threshold value written in the Trscv … |
| 1.3.6.1.4.1.20044.63.2.3.1.120.1.5 | Columnpm10010mrAlmTxModulatorBiasHighAlarmPortn | read-only | current | Line Trscv Tx Modulator Bias High Alarm :This OID indicates that the Trscv Tx modulator bias current is higher than the threshold value written in the Trscv EE… |
| 1.3.6.1.4.1.20044.63.2.3.1.120.1.6 | Columnpm10010mrAlmRxLaserTempLowAlarmPortn | read-only | current | Line Trscv Rx Laser Temp Low Alarm :This OID indicates that the Trscv Rx Laser Temperature is lower than the threshold value written in the Trscv EEPROM <Help>… |
| 1.3.6.1.4.1.20044.63.2.3.1.120.1.7 | Columnpm10010mrAlmRxLaserTempLowWarningPortn | read-only | current | Line Trscv Rx Laser Temp Low Warning :This OID indicates that the Trscv Rx Laser Temperature is lower than the threshold value written in the Trscv EEPROM <Hel… |
| 1.3.6.1.4.1.20044.63.2.3.1.120.1.8 | Columnpm10010mrAlmRxLaserTempHighWarningPortn | read-only | current | Line Trscv Rx Laser Temp High Warning :This OID indicates that the Trscv Rx Laser Temperature is higher than the threshold value written in the Trscv EEPROM <H… |
| 1.3.6.1.4.1.20044.63.2.3.1.120.1.9 | Columnpm10010mrAlmRxLaserTempHighAlarmPortn | read-only | current | Line Trscv Rx Laser Temp High Alarm :This OID indicates that the Trscv Rx Laser Temperature is higher than the threshold value written in the Trscv EEPROM <Hel… |
| 1.3.6.1.4.1.20044.63.2.3.1.120.1.10 | Columnpm10010mrAlmRxLaserOutputLowAlarmPortn | read-only | current | Line Trscv Rx Output Power Low Alarm :This OID indicates that the Trscv Rx output power is lower than the threshold value written in the Trscv EEPROM <Help> Al… |
| 1.3.6.1.4.1.20044.63.2.3.1.120.1.11 | Columnpm10010mrAlmRxLaserOutputLowWarningPortn | read-only | current | Line Trscv Rx Output Power Low Warning :This OID indicates that the Trscv Rx output power is lower than the threshold value written in the Trscv EEPROM <Help> … |
| 1.3.6.1.4.1.20044.63.2.3.1.120.1.12 | Columnpm10010mrAlmRxLaserOutputHighWarningPortn | read-only | current | Line Trscv Rx Output Power High Warning :This OID indicates that the Trscv Rx output power is higher than the threshold value written in the Trscv EEPROM <Help… |
| 1.3.6.1.4.1.20044.63.2.3.1.120.1.13 | Columnpm10010mrAlmRxLaserOutputHighAlarmPortn | read-only | current | Line Trscv Rx Output Power High Alarm :This OID indicates that the Trscv Rx output power is higher than the threshold value written in the Trscv EEPROM <Help> … |
| 1.3.6.1.4.1.20044.63.2.3.1.120.1.14 | Columnpm10010mrAlmRxLaserBiasLowAlarmPortn | read-only | current | Line Trscv Rx Bias Low Alarm :This OID indicates that the Trscv Rx laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Alar… |
| 1.3.6.1.4.1.20044.63.2.3.1.120.1.15 | Columnpm10010mrAlmRxLaserBiasLowWarningPortn | read-only | current | Line Trscv Rx Bias Low Warning :This OID indicates that the Trscv Rx laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Wa… |
| 1.3.6.1.4.1.20044.63.2.3.1.120.1.16 | Columnpm10010mrAlmRxLaserBiasHighWarningPortn | read-only | current | Line Trscv Rx Bias High Warning :This OID indicates that the Trscv Rx laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> … |
| 1.3.6.1.4.1.20044.63.2.3.1.120.1.17 | Columnpm10010mrAlmRxLaserBiasHighAlarmPortn | read-only | current | Line Trscv Rx Bias High Alarm :This OID indicates that the Trscv Rx laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Al… |
| 1.3.6.1.4.1.20044.63.2.3.2 | Nodepm10010mrAlmLineUrg | |||
| 1.3.6.1.4.1.20044.63.2.3.2.136 | Tablepm10010mrAlmlineNetworkLaneFaultTable | not-accessible | current | List of pm10010mrAlmlineNetworkLaneFault Article |
| 1.3.6.1.4.1.20044.63.2.3.2.136.1 | Rowpm10010mrAlmlineNetworkLaneFaultEntry | not-accessible | current | Row definition for the pm10010mrAlmlineNetworkLaneFault table |
| 1.3.6.1.4.1.20044.63.2.3.2.136.1.1 | Columnpm10010mrAlmlineNetworkLaneFaultIndex | read-only | current | Index definition for the pm10010mrAlmlineNetworkLaneFault table |
| 1.3.6.1.4.1.20044.63.2.3.2.136.1.3 | Columnpm10010mrAlmLineLaneRxTecFaultPortn | read-only | current | Line Network Lane Rx TEC Fault :This OID indicates a Rx TEC Fault on the Line Trscv Network Lane <Help> Alarm indicating a Rx TEC Fault on the Line Trscv Netwo… |
| 1.3.6.1.4.1.20044.63.2.3.2.136.1.4 | Columnpm10010mrAlmLineLaneRxFifoErrorPortn | read-only | current | Line Network Lane Rx FIFO Error :This OID indicates a Rx FIFO Error on the Line Trscv Network Lane <Help> Alarm indicating a Rx FIFO Error on the Line Trscv Ne… |
| 1.3.6.1.4.1.20044.63.2.3.2.136.1.5 | Columnpm10010mrAlmLineLaneRxLolPortn | read-only | current | Line Network Lane Rx Loss Of Lock :This OID indicates a Rx Loss of Lock on the Line Trscv Network Lane <Help> Alarm indicating a Rx Loss of Lock on the Line Tr… |
| 1.3.6.1.4.1.20044.63.2.3.2.136.1.6 | Columnpm10010mrAlmLineLaneRxLosPortn | read-only | current | Line Network Lane Rx Loss Of Signal :This OID indicates a Rx Loss of Signal on the Line Trscv Network Lane <Help> Alarm indicating a Rx Loss of Signal on the L… |
| 1.3.6.1.4.1.20044.63.2.3.2.136.1.8 | Columnpm10010mrAlmLineLaneTxLolPortn | read-only | current | Line Network Lane Tx Loss Of Lock :This OID indicates a Tx Loss of Lock on the Line Trscv Network Lane <Help> Alarm indicating a Tx Loss of Lock on the Line Tr… |
| 1.3.6.1.4.1.20044.63.2.3.2.136.1.9 | Columnpm10010mrAlmLineLaneTxLosfPortn | read-only | current | Line Network Lane Tx Loss Of Signal Functionality :This OID indicates a Tx Loss of Signal Functionality on the Line Trscv Network Lane <Help> Alarm indicating … |
| 1.3.6.1.4.1.20044.63.2.3.2.136.1.15 | Columnpm10010mrAlmLineLaneApdPowerSupplyPortn | read-only | current | Line Network Lane APD Power Supply :This OID indicates an APD Power supply failure on the Line Trscv Network Lane <Help> Alarm indicating an APD Power supply f… |
| 1.3.6.1.4.1.20044.63.2.3.2.136.1.16 | Columnpm10010mrAlmLineLaneWavelengthUnlockedPortn | read-only | current | Line Network Lane Wavelength Unlock :This OID indicates a Wavelength unlock on the Line Trscv Network Lane <Help> Alarm indicating a Wavelength unlock on the L… |
| 1.3.6.1.4.1.20044.63.2.3.2.136.1.17 | Columnpm10010mrAlmLineLaneTecFaultPortn | read-only | current | Line Network Lane TEC Fault :This OID indicates a Tx TEC Fault on the Line Trscv Network Lane <Help> Alarm indicating a Tx TEC Fault on the Line Trscv Network … |
| 1.3.6.1.4.1.20044.63.2.3.2.152 | Tablepm10010mrAlmlineHostLaneFaultTable | not-accessible | current | List of pm10010mrAlmlineHostLaneFault Article |
| 1.3.6.1.4.1.20044.63.2.3.2.152.1 | Rowpm10010mrAlmlineHostLaneFaultEntry | not-accessible | current | Row definition for the pm10010mrAlmlineHostLaneFault table |
| 1.3.6.1.4.1.20044.63.2.3.2.152.1.1 | Columnpm10010mrAlmlineHostLaneFaultIndex | read-only | current | Index definition for the pm10010mrAlmlineHostLaneFault table |
| 1.3.6.1.4.1.20044.63.2.3.2.152.1.2 | Columnpm10010mrAlmLineInputLossOfSignalPortn | read-only | current | Line Input Loss Of Signal :This OID indicates a Loss of Signal is detected on the Line Trscv <Help> Alarm indicating a Loss of Signal is detected on the Line T… |
| 1.3.6.1.4.1.20044.63.2.3.2.152.1.3 | Columnpm10010mrAlmLineLossOfFramePortn | read-only | current | Line Loss Of Frame :This OID indicates the module is not aligned with the incoming Line signal <Help> Alarm indicating the module is not aligned with the incom… |
| 1.3.6.1.4.1.20044.63.2.3.2.152.1.4 | Columnpm10010mrAlmLineSmBdiInsertedPortn | read-only | current | Line SM BDI Inserted :This OID indicates a SM Backward Defect Indication is inserted on the outgoing Line signal <Help> Status indicating a SM Backward Defect … |
| 1.3.6.1.4.1.20044.63.2.3.2.152.1.5 | Columnpm10010mrAlmLineSmBdiDetectedPortn | read-only | current | Line SM BDI Detected :This OID indicates a SM Backward Defect Indication is detected on the incoming Line signal <Help> Alarm indicating a SM Backward Defect I… |
| 1.3.6.1.4.1.20044.63.2.3.2.152.1.6 | Columnpm10010mrAlmLineSmIaeInsertedPortn | read-only | current | Line SM IAE Inserted :This OID indicates a SM Incoming Alignment Error is inserted on the outgoing Line signal <Help> Status indicating a SM Incoming Alignment… |
| 1.3.6.1.4.1.20044.63.2.3.2.152.1.7 | Columnpm10010mrAlmLineSmIaeDetectedPortn | read-only | current | Line SM IAE Detected :This OID indicates a SM Incoming Alignment Error is detected on the incoming Line signal <Help> Alarm indicating a SM Incoming Alignment … |
| 1.3.6.1.4.1.20044.63.2.3.2.152.1.10 | Columnpm10010mrAlmLineTxHostLolPortn | read-only | current | Line Host Lane Tx Loss Of Lock :This OID indicates a Tx Loss of Lock on the Line Trscv Host Lane <Help> Alarm indicating a Tx Loss of Lock on the Line Trscv Ho… |
| 1.3.6.1.4.1.20044.63.2.3.2.152.1.11 | Columnpm10010mrAlmLineLaneTxFifoErrorPortn | read-only | current | Line Host Lane Tx FIFO Error :This OID indicates a Tx FIFO Error on the Line Trscv Host Lane <Help> Alarm indicating a Tx FIFO Error on the Line Trscv Host Lan… |
| 1.3.6.1.4.1.20044.63.2.3.2.152.1.16 | Columnpm10010mrAlmLinePowerDegradePortn | read-only | current | 3V3 Power Degrade :This OID indicates the 3V3 power converter was in failure<Help> This alarm indicates the 3V3 power converter was in failure <Condtype> LINE_… |
| 1.3.6.1.4.1.20044.63.2.3.2.152.1.17 | Columnpm10010mrAlmLineTrxOverTempPortn | read-only | current | Temperature Critical Level :This OID indicates the module temperature is too high triggering the power down protection mechanism <Help> This alarm indicates th… |
| 1.3.6.1.4.1.20044.63.2.3.2.168 | Tablepm10010mrAlmlineNetworkLaneRxOtnTable | not-accessible | current | List of pm10010mrAlmlineNetworkLaneRxOtn Article |
| 1.3.6.1.4.1.20044.63.2.3.2.168.1 | Rowpm10010mrAlmlineNetworkLaneRxOtnEntry | not-accessible | current | Row definition for the pm10010mrAlmlineNetworkLaneRxOtn table |
| 1.3.6.1.4.1.20044.63.2.3.2.168.1.1 | Columnpm10010mrAlmlineNetworkLaneRxOtnIndex | read-only | current | Index definition for the pm10010mrAlmlineNetworkLaneRxOtn table |
| 1.3.6.1.4.1.20044.63.2.3.2.168.1.10 | Columnpm10010mrAlmLineRxOtnOduAisPortn | read-only | current | Line Network Rx ODU AIS :This OID indicates an ODU This OID Indication Signal is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating… |
| 1.3.6.1.4.1.20044.63.2.3.2.168.1.11 | Columnpm10010mrAlmLineRxOtnOtuAisPortn | read-only | current | Line Network Rx OTU AIS :This OID indicates an OTU This OID Indication Signal is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating… |
| 1.3.6.1.4.1.20044.63.2.3.2.168.1.12 | Columnpm10010mrAlmLineRxSmBdiPortn | read-only | current | Line Network Rx SM BDI :This OID indicates an SM Backward Defect Indication is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating a… |
| 1.3.6.1.4.1.20044.63.2.3.2.168.1.13 | Columnpm10010mrAlmLineRxOtnIaePortn | read-only | current | Line Network Rx IAE :This OID indicates an Incoming Alignment Error is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating an Incomi… |
| 1.3.6.1.4.1.20044.63.2.3.2.168.1.14 | Columnpm10010mrAlmLineRxOtnOomPortn | read-only | current | Line Network Rx OOM :This OID indicates an Out of Multiframe is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating an Out of Multif… |
| 1.3.6.1.4.1.20044.63.2.3.2.168.1.15 | Columnpm10010mrAlmLineRxOtnLomPortn | read-only | current | Line Network Rx LOM :This OID indicates a Loss of Multiframe is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating a Loss of Multif… |
| 1.3.6.1.4.1.20044.63.2.3.2.168.1.16 | Columnpm10010mrAlmLineRxOtnOofPortn | read-only | current | Line Network Rx OOF :This OID indicates an Out of Frame is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating an Out of Frame is de… |
| 1.3.6.1.4.1.20044.63.2.3.2.168.1.17 | Columnpm10010mrAlmLineRxOtnLofPortn | read-only | current | Line Network Rx LOF :This OID indicates a Loss of Frame is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating a Loss of Frame is de… |
| 1.3.6.1.4.1.20044.63.2.3.2.184 | Tablepm10010mrAlmlineHostLaneTxOtnTable | not-accessible | current | List of pm10010mrAlmlineHostLaneTxOtn Article |
| 1.3.6.1.4.1.20044.63.2.3.2.184.1 | Rowpm10010mrAlmlineHostLaneTxOtnEntry | not-accessible | current | Row definition for the pm10010mrAlmlineHostLaneTxOtn table |
| 1.3.6.1.4.1.20044.63.2.3.2.184.1.1 | Columnpm10010mrAlmlineHostLaneTxOtnIndex | read-only | current | Index definition for the pm10010mrAlmlineHostLaneTxOtn table |
| 1.3.6.1.4.1.20044.63.2.3.2.184.1.10 | Columnpm10010mrAlmLineTxOtnOduAisPortn | read-only | current | Line Host Tx ODU AIS :This OID indicates an ODU This OID Indication Signal is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating an OD… |
| 1.3.6.1.4.1.20044.63.2.3.2.184.1.11 | Columnpm10010mrAlmLineTxOtnOtuAisPortn | read-only | current | Line Host Tx OTU AIS :This OID indicates an OTU This OID Indication Signal is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating an OT… |
| 1.3.6.1.4.1.20044.63.2.3.2.184.1.12 | Columnpm10010mrAlmLineTxSmBdiPortn | read-only | current | Line Host Tx SM BDI :This OID indicates an SM Backward Defect Indication is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating an SM B… |
| 1.3.6.1.4.1.20044.63.2.3.2.184.1.13 | Columnpm10010mrAlmLineTxOtnIaePortn | read-only | current | Line Host Tx IAE :This OID indicates an Incoming Alignment Error is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating an Incoming Ali… |
| 1.3.6.1.4.1.20044.63.2.3.2.184.1.14 | Columnpm10010mrAlmLineTxOtnOomPortn | read-only | current | Line Host Tx OOM :This OID indicates an Out of Multiframe is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating an Out of Multiframe i… |
| 1.3.6.1.4.1.20044.63.2.3.2.184.1.15 | Columnpm10010mrAlmLineTxOtnLomPortn | read-only | current | Line Host Tx LOM :This OID indicates a Loss of Multiframe is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating a Loss of Multiframe i… |
| 1.3.6.1.4.1.20044.63.2.3.2.184.1.16 | Columnpm10010mrAlmLineTxOtnOofPortn | read-only | current | Line Host Tx OOF :This OID indicates an Out of Frame is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating an Out of Frame is detected… |
| 1.3.6.1.4.1.20044.63.2.3.2.184.1.17 | Columnpm10010mrAlmLineTxOtnLofPortn | read-only | current | Line Host Tx LOF :This OID indicates a Loss of Frame is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating a Loss of Frame is detected… |
| 1.3.6.1.4.1.20044.63.2.3.3 | Nodepm10010mrAlmLineCrit | |||
| 1.3.6.1.4.1.20044.63.2.3.3.24 | Tablepm10010mrAlmsynthAlmLineTable | not-accessible | current | List of pm10010mrAlmsynthAlmLine Article |
| 1.3.6.1.4.1.20044.63.2.3.3.24.1 | Rowpm10010mrAlmsynthAlmLineEntry | not-accessible | current | Row definition for the pm10010mrAlmsynthAlmLine table |
| 1.3.6.1.4.1.20044.63.2.3.3.24.1.1 | Columnpm10010mrAlmsynthAlmLineIndex | read-only | current | Index definition for the pm10010mrAlmsynthAlmLine table |
| 1.3.6.1.4.1.20044.63.2.3.3.24.1.2 | Columnpm10010mrAlmXfpAbsentPortn | read-only | current | Line Optical Module Absent :This OID indicates that the line optical interface is not present. <Help> This alarm indicates if the line transceiver is not plugg… |
| 1.3.6.1.4.1.20044.63.2.3.3.24.1.3 | Columnpm10010mrAlmXfpInitNotComplPortn | read-only | current | Line Optical Module Ready :This OID indicates that the optical interface is not operational. <Help> This status indicates if the line transceiver has been corr… |
| 1.3.6.1.4.1.20044.63.2.3.3.24.1.5 | Columnpm10010mrAlmLineHwFailPortn | read-only | current | Line Port HW Failure :This OID indicates a failure on line port, most probably caused by a HW issue <Help> This alarm indicates a failure on line port, most pr… |
| 1.3.6.1.4.1.20044.63.2.3.3.24.1.6 | Columnpm10010mrAlmXfpTxOffPortn | read-only | current | Line Trscv Laser Shutdown :This OID indicates the Line transceiver laser is shutdown <Help> This status indicates if the Line transceiver laser is shutdown <Co… |
| 1.3.6.1.4.1.20044.63.2.3.3.24.1.7 | Columnpm10010mrAlmLineLocalOosPortn | read-only | current | Line Port In Service :This OID indicates that the Line port is In Service (1) of Out or Service (2) <Help> This status indicates if the line port is in service… |
| 1.3.6.1.4.1.20044.63.2.3.3.24.1.9 | Columnpm10010mrAlmUpRdiInsPortn | read-only | current | MS-RDI/L-RDI Inserted On Line :This OID indicates an upstream MS-RDI/L-RDI has been inserted in the outgoing 10 Gb/s SDH/SONET signal. <Help> This status indic… |
| 1.3.6.1.4.1.20044.63.2.3.3.24.1.10 | Columnpm10010mrAlmLineDdmWarningPortn | read-only | current | Warning On Line Optical Module DDM :This OID indicates a warning is present coming out of Line transceiver DDM <Help> This alarm indicates if a DDM Warning has… |
| 1.3.6.1.4.1.20044.63.2.3.3.24.1.11 | Columnpm10010mrAlmLineDdmAlmPortn | read-only | current | Alarm On Line Optical Module DDM :This OID indicates an alarm is present coming out of Line transceiver DDM <Help> This alarm indicates if a DDM Alarm has been… |
| 1.3.6.1.4.1.20044.63.2.3.3.24.1.13 | Columnpm10010mrAlmLineFailPortn | read-only | current | Line Port Failure :This OID indicates a failure on the line port <Help> This alarm indicates a failure on the line port <Condtype> LINE_FAIL <Probcause> equipm… |
| 1.3.6.1.4.1.20044.63.2.3.3.24.1.17 | Columnpm10010mrAlmLineActivePortn | read-only | current | Line Active :This OID indicates whether the line is active or standby. <Help> This status indicates whether the line is active or standby. <Condtype> LINE_ACTI… |
| 1.3.6.1.4.1.20044.63.3 | Nodepm10010mrmeasures | |||
| 1.3.6.1.4.1.20044.63.3.1 | Nodepm10010mrMesrOther | |||
| 1.3.6.1.4.1.20044.63.3.1.0 | Scalarpm10010mrMesrsynth0 | read-only | deprecated | Not Used : |
| 1.3.6.1.4.1.20044.63.3.1.1 | Scalarpm10010mrMesrsynth1 | read-only | deprecated | Not Used : |
| 1.3.6.1.4.1.20044.63.3.1.7 | Scalarpm10010mrMesrpmIntervalNumber | read-only | current | PM Interval Counter : |
| 1.3.6.1.4.1.20044.63.3.1.180 | Scalarpm10010mrMesrlineNetTxLaserOutputPwrAverage | read-only | current | Average Line Trscv Tx Power :This OID gives the average Tx Laser transmit power value among the network lanes of the Line Transceiver, read in the DDM (Digital… |
| 1.3.6.1.4.1.20044.63.3.1.181 | Scalarpm10010mrMesrlineNetTxLaserTempAverage | read-only | current | Average Line Trscv Tx Laser Temperature :This OID gives the average Tx Laser Temperature value among the network lanes of the Line Transceiver, read from the D… |
| 1.3.6.1.4.1.20044.63.3.1.182 | Scalarpm10010mrMesrlineNetTxBiasCurrentAverage | read-only | current | Average Line Trscv Tx Laser Bias :This OID gives the average Tx Laser Bias value among the network lanes of the Line Transceiver, read from the DDM (Digital Di… |
| 1.3.6.1.4.1.20044.63.3.1.183 | Scalarpm10010mrMesrlineNetRxInputPwrAverage | read-only | current | Average Line Trscv Rx Power :This OID gives the average Receive power value among the network lanes of the Line Transceiver, read in the DDM (Digital Diagnosti… |
| 1.3.6.1.4.1.20044.63.3.1.184 | Scalarpm10010mrMesrlineResidualChromaticDispAverage | read-only | current | Average Residual Chromatic Dispersion :This OID gives the average Residual Chromatic Dispersion on the Line interface since the last measure reset <Help> This … |
| 1.3.6.1.4.1.20044.63.3.1.185 | Scalarpm10010mrMesrlineDiffGroupDelayAverage | read-only | current | Average Differential Group Delay :This OID gives the average Group Delay on the Line interface since the last measure reset <Help> This measure gives the avera… |
| 1.3.6.1.4.1.20044.63.3.1.186 | Scalarpm10010mrMesrlineQFactorAverage | read-only | current | Average Q Factor :This OID gives the average Q Factor on the Line interface since the last measure reset <Help> This measure gives the average Q Factor on the … |
| 1.3.6.1.4.1.20044.63.3.1.187 | Scalarpm10010mrMesrlineCarrierFreqOffsetAverage | read-only | current | Average Carrier Frequency Offset :This OID gives the average Carrier Frequency Offset on the Line interface since the last measure reset <Help> This measure gi… |
| 1.3.6.1.4.1.20044.63.3.1.188 | Scalarpm10010mrMesrlineOsnrAverage | read-only | current | Average OSNR :This OID gives the average OSNR on the Line interface since the last measure reset <Help> This measure gives the average OSNR on the Line interfa… |
| 1.3.6.1.4.1.20044.63.3.1.192 | Scalarpm10010mrMesrclientNetTxTempMin | read-only | current | Min Client Trscv Laser Temperature :This OID gives the minimum Laser temperature value among the network lanes of the Client Transceiver, read from the DDM (Di… |
| 1.3.6.1.4.1.20044.63.3.1.193 | Scalarpm10010mrMesrclientNetTxBiasMin | read-only | current | Min Client Trscv Laser Bias :This OID gives the minimum Laser bias value among the network lanes of the Client Transceiver, read from the DDM (Digital Diagnost… |
| 1.3.6.1.4.1.20044.63.3.1.194 | Scalarpm10010mrMesrclientNetTxPwrMin | read-only | current | Min Client Trscv Tx Power :This OID gives the minimum transmit power value among the network lanes of the Client Transceiver, read from the DDM (Digital Diagno… |
| 1.3.6.1.4.1.20044.63.3.1.195 | Scalarpm10010mrMesrclientNetRxPwrMin | read-only | current | Min Client Trscv Rx Power :This OID gives the minimum receive power value among the network lanes of the Client Transceiver, read in the DDM (Digital Diagnosti… |
| 1.3.6.1.4.1.20044.63.3.1.196 | Scalarpm10010mrMesrlineNetTxLaserOutputPwrMin | read-only | current | Min Line Trscv Tx Power :This OID gives the minimum Tx Laser transmit power value among the network lanes of the Line Transceiver, read in the DDM (Digital Dia… |
| 1.3.6.1.4.1.20044.63.3.1.197 | Scalarpm10010mrMesrlineNetTxLaserTempMin | read-only | current | Min Line Trscv Tx Laser Temperature :This OID gives the minimum Tx Laser Temperature value among the network lanes of the Line Transceiver, read from the DDM (… |
| 1.3.6.1.4.1.20044.63.3.1.198 | Scalarpm10010mrMesrlineNetTxBiasCurrentMin | read-only | current | Min Line Trscv Tx Laser Bias :This OID gives the minimum Tx Laser Bias value among the network lanes of the Line Transceiver, read from the DDM (Digital Diagno… |
| 1.3.6.1.4.1.20044.63.3.1.199 | Scalarpm10010mrMesrlineNetRxInputPwrMin | read-only | current | Min Line Trscv Rx Power :This OID gives the minimum Receive power value among the network lanes of the Line Transceiver, read in the DDM (Digital Diagnostic Mo… |
| 1.3.6.1.4.1.20044.63.3.1.200 | Scalarpm10010mrMesrlineResidualChromaticDispMin | read-only | current | Min Residual Chromatic Dispersion :This OID gives the minimum Residual Chromatic Dispersion on the Line interface since the last measure reset (Unit = ps/nm)<H… |
| 1.3.6.1.4.1.20044.63.3.1.201 | Scalarpm10010mrMesrlineDiffGroupDelayMin | read-only | current | Min Differential Group Delay :This OID gives the minimum Differential Group Delay on the Line interface since the last measure reset (Unit = ps)<Help> This mea… |
| 1.3.6.1.4.1.20044.63.3.1.202 | Scalarpm10010mrMesrlineQFactorMin | read-only | current | Min Q Factor :This OID gives the minimum Q Factor on the Line interface since the last measure reset (Unit = dB)<Help> This measure gives the minimum Q Factor … |
| 1.3.6.1.4.1.20044.63.3.1.203 | Scalarpm10010mrMesrlineCarrierFreqOffsetMin | read-only | current | Min Carrier Frequency Offset :This OID gives the minimum Carrier Frequency Offset on the Line interface since the last measure reset (Unit = Mhz)<Help> This me… |
| 1.3.6.1.4.1.20044.63.3.1.204 | Scalarpm10010mrMesrlineOsnrMin | read-only | current | Min OSNR :This OID gives the minimum OSNR on the Line interface since the last measure reset (OSNR = AV/10) (Unit = dB)<Help> This measure gives the minimum OS… |
| 1.3.6.1.4.1.20044.63.3.1.208 | Scalarpm10010mrMesrclientNetTxTempMax | read-only | current | Max Client Trscv Laser Temperature :This OID gives the maximum Laser temperature value among the network lanes of the Client Transceiver, read from the DDM (Di… |
| 1.3.6.1.4.1.20044.63.3.1.209 | Scalarpm10010mrMesrclientNetTxBiasMax | read-only | current | Max Client Trscv Laser Bias :This OID gives the maximum Laser bias value among the network lanes of the Client Transceiver, read from the DDM (Digital Diagnost… |
| 1.3.6.1.4.1.20044.63.3.1.210 | Scalarpm10010mrMesrclientNetTxPwrMax | read-only | current | Max Client Trscv Tx Power :This OID gives the maximum transmit power value among the network lanes of the Client Transceiver, read from the DDM (Digital Diagno… |
| 1.3.6.1.4.1.20044.63.3.1.211 | Scalarpm10010mrMesrclientNetRxPwrMax | read-only | current | Max Client Trscv Rx Power :This OID gives the maximum receive power value among the network lanes of the Client Transceiver, read in the DDM (Digital Diagnosti… |
| 1.3.6.1.4.1.20044.63.3.1.212 | Scalarpm10010mrMesrlineNetTxLaserOutputPwrMax | read-only | current | Max Line Trscv Tx Power :This OID gives the maximum Tx Laser transmit power value among the network lanes of the Line Transceiver, read in the DDM (Digital Dia… |
| 1.3.6.1.4.1.20044.63.3.1.213 | Scalarpm10010mrMesrlineNetTxLaserTempMax | read-only | current | Max Line Trscv Tx Laser Temperature :This OID gives the maximum Tx Laser Temperature value among the network lanes of the Line Transceiver, read from the DDM (… |
| 1.3.6.1.4.1.20044.63.3.1.214 | Scalarpm10010mrMesrlineNetTxBiasCurrentMax | read-only | current | Max Line Trscv Tx Laser Bias :This OID gives the maximum Tx Laser Bias value among the network lanes of the Line Transceiver, read from the DDM (Digital Diagno… |
| 1.3.6.1.4.1.20044.63.3.1.215 | Scalarpm10010mrMesrlineNetRxInputPwrMax | read-only | current | Max Line Trscv Rx Power :This OID gives the maximum Receive power value among the network lanes of the Line Transceiver, read in the DDM (Digital Diagnostic Mo… |
| 1.3.6.1.4.1.20044.63.3.1.216 | Scalarpm10010mrMesrlineResidualChromaticDispMax | read-only | current | Max Residual Chromatic Dispersion :This OID gives the maximum Residual Chromatic Dispersion on the Line interface since the last measure reset (Unit = ps/nm)<H… |
| 1.3.6.1.4.1.20044.63.3.1.217 | Scalarpm10010mrMesrlineDiffGroupDelayMax | read-only | current | Max Differential Group Delay :This OID gives the maximum Differential Group Delay on the Line interface since the last measure reset (Unit = ps)<Help> This mea… |
| 1.3.6.1.4.1.20044.63.3.1.218 | Scalarpm10010mrMesrlineQFactorMax | read-only | current | Max Q Factor :This OID gives the maximum Q Factor on the Line interface since the last measure reset (Unit = dB)<Help> This measure gives the maximum Q Factor … |
| 1.3.6.1.4.1.20044.63.3.1.219 | Scalarpm10010mrMesrlineCarrierFreqOffsetMax | read-only | current | Max Carrier Frequency Offset :This OID gives the maximum Carrier Frequency Offset on the Line interface since the last measure reset (Unit = Mhz)<Help> This me… |
| 1.3.6.1.4.1.20044.63.3.1.220 | Scalarpm10010mrMesrlineOsnrMax | read-only | current | Max OSNR :This OID gives the maximum OSNR on the Line interface since the last measure reset (OSNR = AV/10) (Unit = dB)<Help> This measure gives the maximum OS… |
| 1.3.6.1.4.1.20044.63.3.2 | Nodepm10010mrMesrClient | |||
| 1.3.6.1.4.1.20044.63.3.2.8 | Scalarpm10010mrMesrclientCfpTemp | read-only | current | Client Trscv Temperature :This OID gives the temperature value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/2… |
| 1.3.6.1.4.1.20044.63.3.2.9 | Scalarpm10010mrMesrclientCfp3v3Voltage | read-only | current | Client Trscv Voltage :This OID gives the 3V3 voltage value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Voltage = AV/1000) (Un… |
| 1.3.6.1.4.1.20044.63.3.2.10 | Scalarpm10010mrMesrclientSoaBiasCurrent | read-only | current | Client Trscv SOA Bias :This OID gives the SOA bias value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/500) (Unit = m… |
| 1.3.6.1.4.1.20044.63.3.2.16 | Tablepm10010mrMesrclientNetTxTempTable | not-accessible | current | List of pm10010mrMesrclientNetTxTemp Article |
| 1.3.6.1.4.1.20044.63.3.2.16.1 | Rowpm10010mrMesrclientNetTxTempEntry | not-accessible | current | Row definition for the pm10010mrMesrclientNetTxTemp table |
| 1.3.6.1.4.1.20044.63.3.2.16.1.1 | Columnpm10010mrMesrclientNetTxTempIndex | read-only | current | Index definition for the pm10010mrMesrclientNetTxTemp table |
| 1.3.6.1.4.1.20044.63.3.2.16.1.2 | Columnpm10010mrMesrclientNetTxTempPortn | read-only | current | Client Trscv Temperature :This OID gives the Laser temperature value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature … |
| 1.3.6.1.4.1.20044.63.3.2.32 | Tablepm10010mrMesrclientNetTxBiasTable | not-accessible | current | List of pm10010mrMesrclientNetTxBias Article |
| 1.3.6.1.4.1.20044.63.3.2.32.1 | Rowpm10010mrMesrclientNetTxBiasEntry | not-accessible | current | Row definition for the pm10010mrMesrclientNetTxBias table |
| 1.3.6.1.4.1.20044.63.3.2.32.1.1 | Columnpm10010mrMesrclientNetTxBiasIndex | read-only | current | Index definition for the pm10010mrMesrclientNetTxBias table |
| 1.3.6.1.4.1.20044.63.3.2.32.1.2 | Columnpm10010mrMesrclientNetTxBiasPortn | read-only | current | Client Trscv Laser Bias :This OID gives the Laser bias value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/500) (Unit… |
| 1.3.6.1.4.1.20044.63.3.2.48 | Tablepm10010mrMesrclientNetTxPwrTable | not-accessible | current | List of pm10010mrMesrclientNetTxPwr Article |
| 1.3.6.1.4.1.20044.63.3.2.48.1 | Rowpm10010mrMesrclientNetTxPwrEntry | not-accessible | current | Row definition for the pm10010mrMesrclientNetTxPwr table |
| 1.3.6.1.4.1.20044.63.3.2.48.1.1 | Columnpm10010mrMesrclientNetTxPwrIndex | read-only | current | Index definition for the pm10010mrMesrclientNetTxPwr table |
| 1.3.6.1.4.1.20044.63.3.2.48.1.2 | Columnpm10010mrMesrclientNetTxPwrPortn | read-only | current | Client Trscv Tx Power :This OID gives the transmit power value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)… |
| 1.3.6.1.4.1.20044.63.3.2.64 | Tablepm10010mrMesrclientNetRxPwrTable | not-accessible | current | List of pm10010mrMesrclientNetRxPwr Article |
| 1.3.6.1.4.1.20044.63.3.2.64.1 | Rowpm10010mrMesrclientNetRxPwrEntry | not-accessible | current | Row definition for the pm10010mrMesrclientNetRxPwr table |
| 1.3.6.1.4.1.20044.63.3.2.64.1.1 | Columnpm10010mrMesrclientNetRxPwrIndex | read-only | current | Index definition for the pm10010mrMesrclientNetRxPwr table |
| 1.3.6.1.4.1.20044.63.3.2.64.1.2 | Columnpm10010mrMesrclientNetRxPwrPortn | read-only | current | Client Trscv Rx Power :This OID gives the receive power value of the Client Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40… |
| 1.3.6.1.4.1.20044.63.3.3 | Nodepm10010mrMesrLine | |||
| 1.3.6.1.4.1.20044.63.3.3.12 | Scalarpm10010mrMesrlineMsaTemp | read-only | current | Line Trscv Temperature :This OID gives the temperature value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/256) … |
| 1.3.6.1.4.1.20044.63.3.3.13 | Scalarpm10010mrMesrlineMsa3v3Voltage | read-only | current | Line Trscv Voltage :This OID gives the 3V3 voltage value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Voltage = AV/1000) (Unit =… |
| 1.3.6.1.4.1.20044.63.3.3.14 | Scalarpm10010mrMesrlineSoaBiasCurrent | read-only | current | Line Trscv SOA Bias :This OID gives the SOA bias value of the Line Transceiver,read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/500) (Unit = mA) <H… |
| 1.3.6.1.4.1.20044.63.3.3.80 | Tablepm10010mrMesrlineNetTxLaserOutputPwrTable | not-accessible | current | List of pm10010mrMesrlineNetTxLaserOutputPwr Article |
| 1.3.6.1.4.1.20044.63.3.3.80.1 | Rowpm10010mrMesrlineNetTxLaserOutputPwrEntry | not-accessible | current | Row definition for the pm10010mrMesrlineNetTxLaserOutputPwr table |
| 1.3.6.1.4.1.20044.63.3.3.80.1.1 | Columnpm10010mrMesrlineNetTxLaserOutputPwrIndex | read-only | current | Index definition for the pm10010mrMesrlineNetTxLaserOutputPwr table |
| 1.3.6.1.4.1.20044.63.3.3.80.1.2 | Columnpm10010mrMesrlineNetTxLaserOutputPwrPortn | read-only | current | Current Line Trscv Tx Power :This OID gives the Tx Laser transmit power value of the Line Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power =… |
| 1.3.6.1.4.1.20044.63.3.3.96 | Tablepm10010mrMesrlineNetTxLaserTempTable | not-accessible | current | List of pm10010mrMesrlineNetTxLaserTemp Article |
| 1.3.6.1.4.1.20044.63.3.3.96.1 | Rowpm10010mrMesrlineNetTxLaserTempEntry | not-accessible | current | Row definition for the pm10010mrMesrlineNetTxLaserTemp table |
| 1.3.6.1.4.1.20044.63.3.3.96.1.1 | Columnpm10010mrMesrlineNetTxLaserTempIndex | read-only | current | Index definition for the pm10010mrMesrlineNetTxLaserTemp table |
| 1.3.6.1.4.1.20044.63.3.3.96.1.2 | Columnpm10010mrMesrlineNetTxLaserTempPortn | read-only | current | Current Line Trscv Tx Laser Temperature :This OID gives the Tx Laser Temperature value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitorin… |
| 1.3.6.1.4.1.20044.63.3.3.112 | Tablepm10010mrMesrlineNetTxBiasCurrentTable | not-accessible | current | List of pm10010mrMesrlineNetTxBiasCurrent Article |
| 1.3.6.1.4.1.20044.63.3.3.112.1 | Rowpm10010mrMesrlineNetTxBiasCurrentEntry | not-accessible | current | Row definition for the pm10010mrMesrlineNetTxBiasCurrent table |
| 1.3.6.1.4.1.20044.63.3.3.112.1.1 | Columnpm10010mrMesrlineNetTxBiasCurrentIndex | read-only | current | Index definition for the pm10010mrMesrlineNetTxBiasCurrent table |
| 1.3.6.1.4.1.20044.63.3.3.112.1.2 | Columnpm10010mrMesrlineNetTxBiasCurrentPortn | read-only | current | Current Line Trscv Tx Laser Bias :This OID gives the Tx Laser Bias value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/… |
| 1.3.6.1.4.1.20044.63.3.3.128 | Tablepm10010mrMesrlineNetRxInputPwrTable | not-accessible | current | List of pm10010mrMesrlineNetRxInputPwr Article |
| 1.3.6.1.4.1.20044.63.3.3.128.1 | Rowpm10010mrMesrlineNetRxInputPwrEntry | not-accessible | current | Row definition for the pm10010mrMesrlineNetRxInputPwr table |
| 1.3.6.1.4.1.20044.63.3.3.128.1.1 | Columnpm10010mrMesrlineNetRxInputPwrIndex | read-only | current | Index definition for the pm10010mrMesrlineNetRxInputPwr table |
| 1.3.6.1.4.1.20044.63.3.3.128.1.2 | Columnpm10010mrMesrlineNetRxInputPwrPortn | read-only | current | Current Line Trscv Rx Power :This OID gives the Receive power value of the Line Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power = AV/100) (… |
| 1.3.6.1.4.1.20044.63.3.3.144 | Tablepm10010mrMesrlineResidualChromaticDispTable | not-accessible | current | List of pm10010mrMesrlineResidualChromaticDisp Article |
| 1.3.6.1.4.1.20044.63.3.3.144.1 | Rowpm10010mrMesrlineResidualChromaticDispEntry | not-accessible | current | Row definition for the pm10010mrMesrlineResidualChromaticDisp table |
| 1.3.6.1.4.1.20044.63.3.3.144.1.1 | Columnpm10010mrMesrlineResidualChromaticDispIndex | read-only | current | Index definition for the pm10010mrMesrlineResidualChromaticDisp table |
| 1.3.6.1.4.1.20044.63.3.3.144.1.2 | Columnpm10010mrMesrlineResidualChromaticDispPortn | read-only | current | Current Residual Chromatic Dispersion :This OID gives the current Residual Chromatic Dispersion on the Line interface (Unit = ps/nm)<Help> This measure gives t… |
| 1.3.6.1.4.1.20044.63.3.3.148 | Tablepm10010mrMesrlineDiffGroupDelayTable | not-accessible | current | List of pm10010mrMesrlineDiffGroupDelay Article |
| 1.3.6.1.4.1.20044.63.3.3.148.1 | Rowpm10010mrMesrlineDiffGroupDelayEntry | not-accessible | current | Row definition for the pm10010mrMesrlineDiffGroupDelay table |
| 1.3.6.1.4.1.20044.63.3.3.148.1.1 | Columnpm10010mrMesrlineDiffGroupDelayIndex | read-only | current | Index definition for the pm10010mrMesrlineDiffGroupDelay table |
| 1.3.6.1.4.1.20044.63.3.3.148.1.2 | Columnpm10010mrMesrlineDiffGroupDelayPortn | read-only | current | Current Differential Group Delay :This OID gives the current Differential Group Delay on the Line interface (Unit = ps)<Help> This measure gives the current Di… |
| 1.3.6.1.4.1.20044.63.3.3.152 | Tablepm10010mrMesrlineQFactorTable | not-accessible | current | List of pm10010mrMesrlineQFactor Article |
| 1.3.6.1.4.1.20044.63.3.3.152.1 | Rowpm10010mrMesrlineQFactorEntry | not-accessible | current | Row definition for the pm10010mrMesrlineQFactor table |
| 1.3.6.1.4.1.20044.63.3.3.152.1.1 | Columnpm10010mrMesrlineQFactorIndex | read-only | current | Index definition for the pm10010mrMesrlineQFactor table |
| 1.3.6.1.4.1.20044.63.3.3.152.1.2 | Columnpm10010mrMesrlineQFactorPortn | read-only | current | Current Q Factor :This OID gives the current Q Factor on the Line interface (Unit = dB) <Help> This measure gives the current Q Factor on the Line interface. |
| 1.3.6.1.4.1.20044.63.3.3.156 | Tablepm10010mrMesrlineCarrierFreqOffsetTable | not-accessible | current | List of pm10010mrMesrlineCarrierFreqOffset Article |
| 1.3.6.1.4.1.20044.63.3.3.156.1 | Rowpm10010mrMesrlineCarrierFreqOffsetEntry | not-accessible | current | Row definition for the pm10010mrMesrlineCarrierFreqOffset table |
| 1.3.6.1.4.1.20044.63.3.3.156.1.1 | Columnpm10010mrMesrlineCarrierFreqOffsetIndex | read-only | current | Index definition for the pm10010mrMesrlineCarrierFreqOffset table |
| 1.3.6.1.4.1.20044.63.3.3.156.1.2 | Columnpm10010mrMesrlineCarrierFreqOffsetPortn | read-only | current | Current Carrier Frequency Offset :This OID gives the current Carrier Frequency Offset on the Line interface (Unit = Mhz)<Help> This measure gives the current C… |
| 1.3.6.1.4.1.20044.63.3.3.160 | Tablepm10010mrMesrlineOsnrTable | not-accessible | current | List of pm10010mrMesrlineOsnr Article |
| 1.3.6.1.4.1.20044.63.3.3.160.1 | Rowpm10010mrMesrlineOsnrEntry | not-accessible | current | Row definition for the pm10010mrMesrlineOsnr table |
| 1.3.6.1.4.1.20044.63.3.3.160.1.1 | Columnpm10010mrMesrlineOsnrIndex | read-only | current | Index definition for the pm10010mrMesrlineOsnr table |
| 1.3.6.1.4.1.20044.63.3.3.160.1.2 | Columnpm10010mrMesrlineOsnrPortn | read-only | current | Current OSNR :This OID gives the current OSNR on the Line interface (OSNR = AV/10) (Unit = dB) <Help> This measure gives the current OSNR on the Line interface. |
| 1.3.6.1.4.1.20044.63.4 | Nodepm10010mrcounters | |||
| 1.3.6.1.4.1.20044.63.4.1 | Nodepm10010mrCntOther | |||
| 1.3.6.1.4.1.20044.63.4.2 | Nodepm10010mrCntClient | |||
| 1.3.6.1.4.1.20044.63.4.2.16 | Tablepm10010mrCntclientInputErrorCounterLaneOneTable | not-accessible | current | List of pm10010mrCntclientInputErrorCounterLaneOne Article |
| 1.3.6.1.4.1.20044.63.4.2.16.1 | Rowpm10010mrCntclientInputErrorCounterLaneOneEntry | not-accessible | current | Row definition for the pm10010mrCntclientInputErrorCounterLaneOne table |
| 1.3.6.1.4.1.20044.63.4.2.16.1.1 | Columnpm10010mrCntclientInputErrorCounterLaneOneIndex | read-only | current | Index definition for the pm10010mrCntclientInputErrorCounterLaneOne table |
| 1.3.6.1.4.1.20044.63.4.2.16.1.2 | Columnpm10010mrCntclientInputErrorCounterLaneOneValuePortn | read-only | current | Client_Input_Error_Counter_Lane1 :This counter is incremented each time a coding violation is detected on the host lane of the client transceiver <Help> This c… |
| 1.3.6.1.4.1.20044.63.4.2.16.1.3 | Columnpm10010mrCntclientInputErrorCounterLaneOneErrorPortn | read-only | current | Client Input Counter Error :This OID when set indicates the rate adaptation removal counter value is invalid on Port |
| 1.3.6.1.4.1.20044.63.4.2.16.1.4 | Columnpm10010mrCntclientInputErrorCounterLaneOneOverloadPortn | read-only | current | Client Input Counter Overload :This OID when set indicates a rate adaptation removal counter overload on Port |
| 1.3.6.1.4.1.20044.63.4.2.32 | Tablepm10010mrCntclientInputErrorCounterLaneTwoTable | not-accessible | current | List of pm10010mrCntclientInputErrorCounterLaneTwo Article |
| 1.3.6.1.4.1.20044.63.4.2.32.1 | Rowpm10010mrCntclientInputErrorCounterLaneTwoEntry | not-accessible | current | Row definition for the pm10010mrCntclientInputErrorCounterLaneTwo table |
| 1.3.6.1.4.1.20044.63.4.2.32.1.1 | Columnpm10010mrCntclientInputErrorCounterLaneTwoIndex | read-only | current | Index definition for the pm10010mrCntclientInputErrorCounterLaneTwo table |
| 1.3.6.1.4.1.20044.63.4.2.32.1.2 | Columnpm10010mrCntclientInputErrorCounterLaneTwoValuePortn | read-only | current | Client_Input_Error_Counter_Lane2 :This counter is incremented each time a coding violation is detected on the host lane of the client transceiver <Help> This c… |
| 1.3.6.1.4.1.20044.63.4.2.32.1.3 | Columnpm10010mrCntclientInputErrorCounterLaneTwoErrorPortn | read-only | current | Client Input Counter Error :This OID when set indicates the client error counter value is invalid on Port |
| 1.3.6.1.4.1.20044.63.4.2.32.1.4 | Columnpm10010mrCntclientInputErrorCounterLaneTwoOverloadPortn | read-only | current | Client Input Counter Overload :This OID when set indicates a client input error counter overload on Port |
| 1.3.6.1.4.1.20044.63.4.2.80 | Tablepm10010mrCntclientInputErrorCounterTable | not-accessible | current | List of pm10010mrCntclientInputErrorCounter Article |
| 1.3.6.1.4.1.20044.63.4.2.80.1 | Rowpm10010mrCntclientInputErrorCounterEntry | not-accessible | current | Row definition for the pm10010mrCntclientInputErrorCounter table |
| 1.3.6.1.4.1.20044.63.4.2.80.1.1 | Columnpm10010mrCntclientInputErrorCounterIndex | read-only | current | Index definition for the pm10010mrCntclientInputErrorCounter table |
| 1.3.6.1.4.1.20044.63.4.2.80.1.2 | Columnpm10010mrCntclientInputErrorCounterValuePortn | read-only | current | Client Input Errors :This counter is increased each time a 10b/8b running disparity error is detected on the Client input stream <Help> This counter gives the … |
| 1.3.6.1.4.1.20044.63.4.2.80.1.3 | Columnpm10010mrCntclientInputErrorCounterErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the client error counter value is invalid on Port |
| 1.3.6.1.4.1.20044.63.4.2.80.1.4 | Columnpm10010mrCntclientInputErrorCounterOverloadPortn | read-only | current | Client Counter Overload :This OID when set indicates a client input error counter overload on Port |
| 1.3.6.1.4.1.20044.63.4.2.96 | Tablepm10010mrCntclientCbipCounterTable | not-accessible | current | List of pm10010mrCntclientCbipCounter Article |
| 1.3.6.1.4.1.20044.63.4.2.96.1 | Rowpm10010mrCntclientCbipCounterEntry | not-accessible | current | Row definition for the pm10010mrCntclientCbipCounter table |
| 1.3.6.1.4.1.20044.63.4.2.96.1.1 | Columnpm10010mrCntclientCbipCounterIndex | read-only | current | Index definition for the pm10010mrCntclientCbipCounter table |
| 1.3.6.1.4.1.20044.63.4.2.96.1.2 | Columnpm10010mrCntclientCbipCounterValuePortn | read-only | current | Client Output Errors :This counter is incremented each time a CBIP parity error is detected on the Client output stream <Help> This counter gives the number of… |
| 1.3.6.1.4.1.20044.63.4.2.96.1.3 | Columnpm10010mrCntclientCbipCounterErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the CBIP error counter value is invalid on Port |
| 1.3.6.1.4.1.20044.63.4.2.96.1.4 | Columnpm10010mrCntclientCbipCounterOverloadPortn | read-only | current | Client CBIP Counter Overload :This OID when set indicates a CBIP error counter overload on Port |
| 1.3.6.1.4.1.20044.63.4.3 | Nodepm10010mrCntLine | |||
| 1.3.6.1.4.1.20044.63.4.3.192 | Tablepm10010mrCntlocalLineSmBip8ErrorCounterTable | not-accessible | current | List of pm10010mrCntlocalLineSmBip8ErrorCounter Article |
| 1.3.6.1.4.1.20044.63.4.3.192.1 | Rowpm10010mrCntlocalLineSmBip8ErrorCounterEntry | not-accessible | current | Row definition for the pm10010mrCntlocalLineSmBip8ErrorCounter table |
| 1.3.6.1.4.1.20044.63.4.3.192.1.1 | Columnpm10010mrCntlocalLineSmBip8ErrorCounterIndex | read-only | current | Index definition for the pm10010mrCntlocalLineSmBip8ErrorCounter table |
| 1.3.6.1.4.1.20044.63.4.3.192.1.2 | Columnpm10010mrCntlocalLineSmBip8ErrorCounterValuePortn | read-only | current | Line Input SM-BIP8 Errors :This OID gives the current Bit Error Rate (residual SM-BIP8 error) after FEC <Help> This counter gives the current Bit Error Rate (r… |
| 1.3.6.1.4.1.20044.63.4.3.192.1.3 | Columnpm10010mrCntlocalLineSmBip8ErrorCounterErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the B1 error counter value is invalid on Port |
| 1.3.6.1.4.1.20044.63.4.3.192.1.4 | Columnpm10010mrCntlocalLineSmBip8ErrorCounterOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a B1 error counter overload on Port |
| 1.3.6.1.4.1.20044.63.4.3.193 | Tablepm10010mrCntlocalLineFecCorrectedErrorsCounterTable | not-accessible | current | List of pm10010mrCntlocalLineFecCorrectedErrorsCounter Article |
| 1.3.6.1.4.1.20044.63.4.3.193.1 | Rowpm10010mrCntlocalLineFecCorrectedErrorsCounterEntry | not-accessible | current | Row definition for the pm10010mrCntlocalLineFecCorrectedErrorsCounter table |
| 1.3.6.1.4.1.20044.63.4.3.193.1.1 | Columnpm10010mrCntlocalLineFecCorrectedErrorsCounterIndex | read-only | current | Index definition for the pm10010mrCntlocalLineFecCorrectedErrorsCounter table |
| 1.3.6.1.4.1.20044.63.4.3.193.1.2 | Columnpm10010mrCntlocalLineFecCorrectedErrorsCounterValuePortn | read-only | current | Line Input HD FEC Corrected Errors :This OID gives the current Bit Error Rate before the Hard Decision FEC <Help> This counter gives the current Bit Error Rate… |
| 1.3.6.1.4.1.20044.63.4.3.193.1.3 | Columnpm10010mrCntlocalLineFecCorrectedErrorsCounterErrorPortn | read-only | current | FEC Counter Error :This bit when set indicates the FEC corrected errors counter value is invalid on Line |
| 1.3.6.1.4.1.20044.63.4.3.193.1.4 | Columnpm10010mrCntlocalLineFecCorrectedErrorsCounterOverloadPortn | read-only | current | FEC Counter Overload :This bit when set indicates a FEC corrected errors counter overload on Line |
| 1.3.6.1.4.1.20044.63.4.3.194 | Tablepm10010mrCntremoteLineSmBip8ErrorCounterTable | not-accessible | current | List of pm10010mrCntremoteLineSmBip8ErrorCounter Article |
| 1.3.6.1.4.1.20044.63.4.3.194.1 | Rowpm10010mrCntremoteLineSmBip8ErrorCounterEntry | not-accessible | current | Row definition for the pm10010mrCntremoteLineSmBip8ErrorCounter table |
| 1.3.6.1.4.1.20044.63.4.3.194.1.1 | Columnpm10010mrCntremoteLineSmBip8ErrorCounterIndex | read-only | current | Index definition for the pm10010mrCntremoteLineSmBip8ErrorCounter table |
| 1.3.6.1.4.1.20044.63.4.3.194.1.2 | Columnpm10010mrCntremoteLineSmBip8ErrorCounterValuePortn | read-only | current | Remote SM BIP8 :This OID gives the current Bit Error Rate (residual SM-BIP8 error) after FEC on the remote side <Help> This counter gives the current Bit Error… |
| 1.3.6.1.4.1.20044.63.4.3.194.1.3 | Columnpm10010mrCntremoteLineSmBip8ErrorCounterErrorPortn | read-only | current | Remote Counter Error : |
| 1.3.6.1.4.1.20044.63.4.3.194.1.4 | Columnpm10010mrCntremoteLineSmBip8ErrorCounterOverloadPortn | read-only | current | Remote Counter Overload : |
| 1.3.6.1.4.1.20044.63.4.3.195 | Tablepm10010mrCntlineDfrmTimCntTable | not-accessible | current | List of pm10010mrCntlineDfrmTimCnt Article |
| 1.3.6.1.4.1.20044.63.4.3.195.1 | Rowpm10010mrCntlineDfrmTimCntEntry | not-accessible | current | Row definition for the pm10010mrCntlineDfrmTimCnt table |
| 1.3.6.1.4.1.20044.63.4.3.195.1.1 | Columnpm10010mrCntlineDfrmTimCntIndex | read-only | current | Index definition for the pm10010mrCntlineDfrmTimCnt table |
| 1.3.6.1.4.1.20044.63.4.3.195.1.2 | Columnpm10010mrCntlineDfrmTimCntValuePortn | read-only | current | Line Timer Counter : |
| 1.3.6.1.4.1.20044.63.4.3.195.1.3 | Columnpm10010mrCntlineDfrmTimCntErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port |
| 1.3.6.1.4.1.20044.63.4.3.195.1.4 | Columnpm10010mrCntlineDfrmTimCntOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port |
| 1.3.6.1.4.1.20044.63.4.3.196 | Tablepm10010mrCntlocalLineTrscvFecCorrectedErrorCounterTable | not-accessible | current | List of pm10010mrCntlocalLineTrscvFecCorrectedErrorCounter Article |
| 1.3.6.1.4.1.20044.63.4.3.196.1 | Rowpm10010mrCntlocalLineTrscvFecCorrectedErrorCounterEntry | not-accessible | current | Row definition for the pm10010mrCntlocalLineTrscvFecCorrectedErrorCounter table |
| 1.3.6.1.4.1.20044.63.4.3.196.1.1 | Columnpm10010mrCntlocalLineTrscvFecCorrectedErrorCounterIndex | read-only | current | Index definition for the pm10010mrCntlocalLineTrscvFecCorrectedErrorCounter table |
| 1.3.6.1.4.1.20044.63.4.3.196.1.2 | Columnpm10010mrCntlocalLineTrscvFecCorrectedErrorCounterValuePortn | read-only | current | Line Input SD FEC Corrected Errors :This OID gives the current Bit Error Rate before the Soft Decision FEC <Help> This counter gives the current Bit Error Rate… |
| 1.3.6.1.4.1.20044.63.4.3.196.1.3 | Columnpm10010mrCntlocalLineTrscvFecCorrectedErrorCounterErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port |
| 1.3.6.1.4.1.20044.63.4.3.196.1.4 | Columnpm10010mrCntlocalLineTrscvFecCorrectedErrorCounterOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port |
| 1.3.6.1.4.1.20044.63.4.3.197 | Tablepm10010mrCntlocalLineTrscvFecUncorrectedErrorCounterTable | not-accessible | current | List of pm10010mrCntlocalLineTrscvFecUncorrectedErrorCounter Article |
| 1.3.6.1.4.1.20044.63.4.3.197.1 | Rowpm10010mrCntlocalLineTrscvFecUncorrectedErrorCounterEntry | not-accessible | current | Row definition for the pm10010mrCntlocalLineTrscvFecUncorrectedErrorCounter table |
| 1.3.6.1.4.1.20044.63.4.3.197.1.1 | Columnpm10010mrCntlocalLineTrscvFecUncorrectedErrorCounterIndex | read-only | current | Index definition for the pm10010mrCntlocalLineTrscvFecUncorrectedErrorCounter table |
| 1.3.6.1.4.1.20044.63.4.3.197.1.2 | Columnpm10010mrCntlocalLineTrscvFecUncorrectedErrorCounterValuePortn | read-only | current | SD Uncorrected :This OID gives the current Bit Error Rate after the Soft Decision FEC (residual) <Help> This counter gives the current Bit Error Rate after the… |
| 1.3.6.1.4.1.20044.63.4.3.197.1.3 | Columnpm10010mrCntlocalLineTrscvFecUncorrectedErrorCounterErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port |
| 1.3.6.1.4.1.20044.63.4.3.197.1.4 | Columnpm10010mrCntlocalLineTrscvFecUncorrectedErrorCounterOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port |
| 1.3.6.1.4.1.20044.63.6 | Nodepm10010mrcontrolsWrite | |||
| 1.3.6.1.4.1.20044.63.6.1 | Nodepm10010mrCtrlOther | |||
| 1.3.6.1.4.1.20044.63.6.1.1 | Nodepm10010mrCtrlconfMgnt1 | |||
| 1.3.6.1.4.1.20044.63.6.1.1.1 | Scalarpm10010mrCtrlConf1Load1 | read-write | current | Load Configuration Tables Set Nb 1 :When set this OID enables loading from flash configuration1 into the PM. |
| 1.3.6.1.4.1.20044.63.6.1.1.2 | Scalarpm10010mrCtrlConf2Load1 | read-write | current | Load Configuration Tables Set Nb 2 :When set this OID enables loading from flash configuration2 into the PM. |
| 1.3.6.1.4.1.20044.63.6.1.1.10 | Scalarpm10010mrCtrlConf2Flash1 | read-write | current | Write Configuration Tables :This OID saves the current configuration of the PM as configuration2 in the flash. <Help> This control saves the customer configura… |
| 1.3.6.1.4.1.20044.63.6.1.1.14 | Scalarpm10010mrCtrlConf2Clear1 | read-write | current | Clear Configuration Tables :This OID clears the configuration tables from configuration2 in the flash. <Help> This control restores the default configuration o… |
| 1.3.6.1.4.1.20044.63.6.1.4 | Nodepm10010mrCtrlsynth4 | |||
| 1.3.6.1.4.1.20044.63.6.1.4.1 | Scalarpm10010mrCtrlCorrelatOn | read-write | current | Enable Alarm Correlation :This OID enables the alarm correlation in the PM. |
| 1.3.6.1.4.1.20044.63.6.1.4.2 | Scalarpm10010mrCtrlCorrelatOff | read-write | current | Disable Alarm Correlation :This OID disables the alarm correlation in the PM. |
| 1.3.6.1.4.1.20044.63.6.1.5 | Nodepm10010mrCtrlswMgnt | |||
| 1.3.6.1.4.1.20044.63.6.1.5.2 | Scalarpm10010mrCtrlColdReset | read-write | current | PM Cold Reset :This OID, when set, causes a cold reset of the PM. This reset is traffic affecting, and the configuration of PM is reloaded on start-up. <Help> … |
| 1.3.6.1.4.1.20044.63.6.1.5.3 | Scalarpm10010mrCtrlWarmReset | read-write | current | PM Warm Reset :This OID, when set, causes a warm reset of the PM. This reset is not traffic affecting, and the configuration of PM remains unchanged. <Help> Th… |
| 1.3.6.1.4.1.20044.63.6.1.5.5 | Scalarpm10010mrCtrlLoadSwBank1 | read-write | current | Set Software Nb 1 As Active :This OID, when set, loads the SW from bank1 into the PM. It must be followed by a reset. <Help> This controls selects the first SW… |
| 1.3.6.1.4.1.20044.63.6.1.5.6 | Scalarpm10010mrCtrlLoadSwBank2 | read-write | current | Set Software Nb 2 As Active :This OID, when set, loads the SW from bank2 into the PM. It must be followed by a reset. <Help> This controls selects the second S… |
| 1.3.6.1.4.1.20044.63.6.1.6 | Nodepm10010mrCtrlgwMgnt | |||
| 1.3.6.1.4.1.20044.63.6.1.6.1 | Scalarpm10010mrCtrlCurrentGwReset | read-write | current | Active Gateware Reset :This OID, when set, resets the active gateware. It is traffic affecting. |
| 1.3.6.1.4.1.20044.63.6.1.6.5 | Scalarpm10010mrCtrlLoadGwBank1 | read-write | current | Set Gateware Nb 1 As Active :This OID, when set, loads the GW from bank1 (Flash) into the PM. It is followed by an automatic gateware cold reset. <Help> This c… |
| 1.3.6.1.4.1.20044.63.6.1.6.6 | Scalarpm10010mrCtrlLoadGwBank2 | read-write | current | Set Gateware Nb 2 As Active :This OID, when set, loads the GW from bank2 (Flash) into the PM. It is followed by an automatic gateware cold reset. |
| 1.3.6.1.4.1.20044.63.6.1.6.7 | Scalarpm10010mrCtrlLoadGwBank3 | read-write | current | Set Gateware Nb 3 As Active :This OID, when set, loads the GW from bank3 (Flash) into the PM. It is followed by an automatic gateware cold reset. <Help> This c… |
| 1.3.6.1.4.1.20044.63.6.1.6.8 | Scalarpm10010mrCtrlLoadGwBank4 | read-write | current | Set Gateware Nb 4 As Active :This OID, when set, loads the GW from bank4 (Flash) into the PM. It is followed by an automatic gateware cold reset. |
| 1.3.6.1.4.1.20044.63.6.1.192 | Nodepm10010mrCtrlledTest | |||
| 1.3.6.1.4.1.20044.63.6.1.192.1 | Scalarpm10010mrCtrlGreenLed | read-write | current | Green Leds Test :This OID switches on all the green Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to green |
| 1.3.6.1.4.1.20044.63.6.1.192.2 | Scalarpm10010mrCtrlRedLed | read-write | current | Red Leds Test :This OID switches on all the red Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to red |
| 1.3.6.1.4.1.20044.63.6.1.192.3 | Scalarpm10010mrCtrlLedOff | read-write | current | Leds Off :This OID switches off all the Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to OFF |
| 1.3.6.1.4.1.20044.63.6.1.201 | Nodepm10010mrCtrlinitSwitchMarvell | |||
| 1.3.6.1.4.1.20044.63.6.1.201.1 | Scalarpm10010mrCtrlInitSwitchMarvell | read-write | current | Switch Initialization :This OID operates an initialization of the switch managed through the module <Help> This control activates an initialization of the swit… |
| 1.3.6.1.4.1.20044.63.6.1.259 | Nodepm10010mrCtrlresetCount | |||
| 1.3.6.1.4.1.20044.63.6.1.259.1 | Scalarpm10010mrCtrlResetcount | read-write | current | Module Count Global Reset :This OID resets all the errors counters on the module <Help > This control initiates a reset of the errors counters on the module |
| 1.3.6.1.4.1.20044.63.6.1.260 | Nodepm10010mrCtrlresetRmon | |||
| 1.3.6.1.4.1.20044.63.6.1.260.1 | Scalarpm10010mrCtrlResetrmon | read-write | current | Module Rmon Global Reset :This OID resets all the Rmon counters on the module <Help > This control initiates a reset of the Rmon counters on the module |
| 1.3.6.1.4.1.20044.63.6.1.261 | Nodepm10010mrCtrlresetMeasurements | |||
| 1.3.6.1.4.1.20044.63.6.1.261.1 | Scalarpm10010mrCtrlResetmeasurements | read-write | current | Management Meas Global Reset :This OID resets some measurements on the management <Help > This control initiates a reset of some measurements on the management |
| 1.3.6.1.4.1.20044.63.6.2 | Nodepm10010mrCtrlClient | |||
| 1.3.6.1.4.1.20044.63.6.2.16 | Tablepm10010mrCtrlaccessLoopTable | not-accessible | current | List of pm10010mrCtrlaccessLoop Article |
| 1.3.6.1.4.1.20044.63.6.2.16.1 | Rowpm10010mrCtrlaccessLoopEntry | not-accessible | current | Row definition for the pm10010mrCtrlaccessLoop table |
| 1.3.6.1.4.1.20044.63.6.2.16.1.1 | Columnpm10010mrCtrlaccessLoopIndex | read-only | current | Index definition for the pm10010mrCtrlaccessLoop table |
| 1.3.6.1.4.1.20044.63.6.2.16.1.2 | Columnpm10010mrCtrlaccessLoopPortn | read-write | current | Client Facility Loopback :This OID, when set at '1' puts the client port in loopback, looping the received 10 Gb/s signal on the transmit 10 Gb/s output. <Help… |
| 1.3.6.1.4.1.20044.63.6.2.17 | Tablepm10010mrCtrlclientLoopToLineTable | not-accessible | current | List of pm10010mrCtrlclientLoopToLine Article |
| 1.3.6.1.4.1.20044.63.6.2.17.1 | Rowpm10010mrCtrlclientLoopToLineEntry | not-accessible | current | Row definition for the pm10010mrCtrlclientLoopToLine table |
| 1.3.6.1.4.1.20044.63.6.2.17.1.1 | Columnpm10010mrCtrlclientLoopToLineIndex | read-only | current | Index definition for the pm10010mrCtrlclientLoopToLine table |
| 1.3.6.1.4.1.20044.63.6.2.17.1.2 | Columnpm10010mrCtrlclientLoopToLinePortn | read-write | current | Client Terminal Loopback :This OID, when set, puts the client port in loop back, looping the 10 Gb/s output signal on the 10 Gb/s input.<Help> This control ena… |
| 1.3.6.1.4.1.20044.63.6.2.21 | Tablepm10010mrCtrlcsfUpInsTable | not-accessible | current | List of pm10010mrCtrlcsfUpIns Article |
| 1.3.6.1.4.1.20044.63.6.2.21.1 | Rowpm10010mrCtrlcsfUpInsEntry | not-accessible | current | Row definition for the pm10010mrCtrlcsfUpIns table |
| 1.3.6.1.4.1.20044.63.6.2.21.1.1 | Columnpm10010mrCtrlcsfUpInsIndex | read-only | current | Index definition for the pm10010mrCtrlcsfUpIns table |
| 1.3.6.1.4.1.20044.63.6.2.21.1.2 | Columnpm10010mrCtrlcsfUpInsPortn | read-write | current | Client Signal Fail Insertion :This OID, when set, inserts a client signal fail in the upstream client Port. <Help> This control inserts a Client Signal Fail fo… |
| 1.3.6.1.4.1.20044.63.6.2.22 | Tablepm10010mrCtrlcaisDwInsTable | not-accessible | current | List of pm10010mrCtrlcaisDwIns Article |
| 1.3.6.1.4.1.20044.63.6.2.22.1 | Rowpm10010mrCtrlcaisDwInsEntry | not-accessible | current | Row definition for the pm10010mrCtrlcaisDwIns table |
| 1.3.6.1.4.1.20044.63.6.2.22.1.1 | Columnpm10010mrCtrlcaisDwInsIndex | read-only | current | Index definition for the pm10010mrCtrlcaisDwIns table |
| 1.3.6.1.4.1.20044.63.6.2.22.1.2 | Columnpm10010mrCtrlcaisDwInsPortn | read-write | current | Client AIS Insertion :This OID, when set, inserts a client AIS on the downstream client Port. <Help> This control inserts a Client AIS for the client port |
| 1.3.6.1.4.1.20044.63.6.3 | Nodepm10010mrCtrlLine | |||
| 1.3.6.1.4.1.20044.63.6.3.64 | Tablepm10010mrCtrlcommAccessLoopTable | not-accessible | current | List of pm10010mrCtrlcommAccessLoop Article |
| 1.3.6.1.4.1.20044.63.6.3.64.1 | Rowpm10010mrCtrlcommAccessLoopEntry | not-accessible | current | Row definition for the pm10010mrCtrlcommAccessLoop table |
| 1.3.6.1.4.1.20044.63.6.3.64.1.1 | Columnpm10010mrCtrlcommAccessLoopIndex | read-only | current | Index definition for the pm10010mrCtrlcommAccessLoop table |
| 1.3.6.1.4.1.20044.63.6.3.64.1.2 | Columnpm10010mrCtrlcommAccessLoopPortn | read-write | current | Line Terminal Loopback :This OID, when set, puts the module in common access loop back, looping the 100 Gb/s output signal on the 100 Gb/s input.<Help> This co… |
| 1.3.6.1.4.1.20044.63.6.3.66 | Tablepm10010mrCtrllineLoopTable | not-accessible | current | List of pm10010mrCtrllineLoop Article |
| 1.3.6.1.4.1.20044.63.6.3.66.1 | Rowpm10010mrCtrllineLoopEntry | not-accessible | current | Row definition for the pm10010mrCtrllineLoop table |
| 1.3.6.1.4.1.20044.63.6.3.66.1.1 | Columnpm10010mrCtrllineLoopIndex | read-only | current | Index definition for the pm10010mrCtrllineLoop table |
| 1.3.6.1.4.1.20044.63.6.3.66.1.2 | Columnpm10010mrCtrllineLoopPortn | read-write | current | Line Facility Loopback :This OID, when set at '1' puts the module in line loopback mode, looping the received 100 Gb/s signal on the transmit 100 Gb/s output. … |
| 1.3.6.1.4.1.20044.63.6.3.69 | Tablepm10010mrCtrlfecDisableTable | not-accessible | current | List of pm10010mrCtrlfecDisable Article |
| 1.3.6.1.4.1.20044.63.6.3.69.1 | Rowpm10010mrCtrlfecDisableEntry | not-accessible | current | Row definition for the pm10010mrCtrlfecDisable table |
| 1.3.6.1.4.1.20044.63.6.3.69.1.1 | Columnpm10010mrCtrlfecDisableIndex | read-only | current | Index definition for the pm10010mrCtrlfecDisable table |
| 1.3.6.1.4.1.20044.63.6.3.69.1.2 | Columnpm10010mrCtrlfecDisablePortn | read-write | current | Forward Error Correction Inhibition :This OID, when set, inhibits the Forward Error Correction feature on the line input <Help> This control enables/disables t… |
| 1.3.6.1.4.1.20044.63.6.3.209 | Tablepm10010mrCtrlmsaLineLoopTable | not-accessible | current | List of pm10010mrCtrlmsaLineLoop Article |
| 1.3.6.1.4.1.20044.63.6.3.209.1 | Rowpm10010mrCtrlmsaLineLoopEntry | not-accessible | current | Row definition for the pm10010mrCtrlmsaLineLoop table |
| 1.3.6.1.4.1.20044.63.6.3.209.1.1 | Columnpm10010mrCtrlmsaLineLoopIndex | read-only | current | Index definition for the pm10010mrCtrlmsaLineLoop table |
| 1.3.6.1.4.1.20044.63.6.3.209.1.2 | Columnpm10010mrCtrlmsaLineLoopPortn | read-write | current | MSA Line Loop :This OID operates a line loopback on the MSA Line <Help> This control defines the line loop back of the line transceiver |
| 1.3.6.1.4.1.20044.63.6.3.210 | Tablepm10010mrCtrlmsaTxResetTable | not-accessible | current | List of pm10010mrCtrlmsaTxReset Article |
| 1.3.6.1.4.1.20044.63.6.3.210.1 | Rowpm10010mrCtrlmsaTxResetEntry | not-accessible | current | Row definition for the pm10010mrCtrlmsaTxReset table |
| 1.3.6.1.4.1.20044.63.6.3.210.1.1 | Columnpm10010mrCtrlmsaTxResetIndex | read-only | current | Index definition for the pm10010mrCtrlmsaTxReset table |
| 1.3.6.1.4.1.20044.63.6.3.210.1.2 | Columnpm10010mrCtrlmsaTxResetPortn | read-write | current | Line MSA TX Reset :This OID resets the TX portion of the MSA line module <Help > This control initiates a reset of the transmitting side |
| 1.3.6.1.4.1.20044.63.6.3.211 | Tablepm10010mrCtrlmsaRxResetTable | not-accessible | current | List of pm10010mrCtrlmsaRxReset Article |
| 1.3.6.1.4.1.20044.63.6.3.211.1 | Rowpm10010mrCtrlmsaRxResetEntry | not-accessible | current | Row definition for the pm10010mrCtrlmsaRxReset table |
| 1.3.6.1.4.1.20044.63.6.3.211.1.1 | Columnpm10010mrCtrlmsaRxResetIndex | read-only | current | Index definition for the pm10010mrCtrlmsaRxReset table |
| 1.3.6.1.4.1.20044.63.6.3.211.1.2 | Columnpm10010mrCtrlmsaRxResetPortn | read-write | current | Line MSA RX Reset :This OID resets the RX portion of the MSA line module <Help > This control initiates a reset of the receiving side |
| 1.3.6.1.4.1.20044.63.6.3.212 | Tablepm10010mrCtrlmsaShutdownTable | not-accessible | current | List of pm10010mrCtrlmsaShutdown Article |
| 1.3.6.1.4.1.20044.63.6.3.212.1 | Rowpm10010mrCtrlmsaShutdownEntry | not-accessible | current | Row definition for the pm10010mrCtrlmsaShutdown table |
| 1.3.6.1.4.1.20044.63.6.3.212.1.1 | Columnpm10010mrCtrlmsaShutdownIndex | read-only | current | Index definition for the pm10010mrCtrlmsaShutdown table |
| 1.3.6.1.4.1.20044.63.6.3.212.1.2 | Columnpm10010mrCtrlmsaShutdownPortn | read-write | current | Line MSA Shutdown :This OID enters a process to shutdown the MSA line module <Help > This control initiates a shutdown of the module |
| 1.3.6.1.4.1.20044.63.7 | Nodepm10010mrri | |||
| 1.3.6.1.4.1.20044.63.7.1 | Nodepm10010mrriTable | |||
| 1.3.6.1.4.1.20044.63.7.1.1 | Tablepm10010mrRinvSfpTable | not-accessible | current | List of the SFPs on the selected module |
| 1.3.6.1.4.1.20044.63.7.1.1.1 | Rowpm10010mrRinvSfpEntry | not-accessible | current | Row definition for the SFP table |
| 1.3.6.1.4.1.20044.63.7.1.1.1.1 | Columnpm10010mrRinvSfpIndex | read-only | current | Index for SFP table |
| 1.3.6.1.4.1.20044.63.7.1.1.1.2 | Columnpm10010mrRinvsfp | read-only | current | Inventory for the SFP: This OID contains the inventory for the SFP |
| 1.3.6.1.4.1.20044.63.7.1.2 | Tablepm10010mrRinvLineTable | not-accessible | current | List of the XFPs on the selected module |
| 1.3.6.1.4.1.20044.63.7.1.2.1 | Rowpm10010mrRinvLineEntry | not-accessible | current | Row definition for the XFP table |
| 1.3.6.1.4.1.20044.63.7.1.2.1.1 | Columnpm10010mrRinvLineIndex | read-only | current | Index for XFP table |
| 1.3.6.1.4.1.20044.63.7.1.2.1.2 | Columnpm10010mrRinvxfpLine | read-only | current | Inventory for the XFP: This OID contains the inventory for the XFP |
| 1.3.6.1.4.1.20044.63.7.2 | Scalarpm10010mrRinvReloadInventory | read-write | current | Reload the inventory: This OID triggers an inventory reload. |
| 1.3.6.1.4.1.20044.63.7.3 | Scalarpm10010mrRinvHwPlatform | read-only | current | HW platform description: This OID contains the description of the Hardware platform. |
| 1.3.6.1.4.1.20044.63.7.4 | Scalarpm10010mrRinvModulePlatform | read-only | current | Module platform description: This OID contains the description of the Module. |
| 1.3.6.1.4.1.20044.63.7.5 | Scalarpm10010mrRinvSwPlatform | read-only | current | SW platform description: This OID contains the description of the Software platform. |
| 1.3.6.1.4.1.20044.63.7.6 | Scalarpm10010mrRinvGwPlatform | read-only | current | GW platform desciption: This OID contains the description of the Gateware platform. |
| 1.3.6.1.4.1.20044.63.8 | Nodepm10010mrdownload | |||
| 1.3.6.1.4.1.20044.63.8.1 | Nodepm10010mrDwlOther | |||
| 1.3.6.1.4.1.20044.63.8.1.0 | Nodepm10010mrDwlrestartProcess | |||
| 1.3.6.1.4.1.20044.63.8.1.0.1 | Scalarpm10010mrDwlWarmRestartProcessed | read-only | current | Warm Restart :This OID indicates that the module last restart was a Warm RESTART |
| 1.3.6.1.4.1.20044.63.8.1.0.2 | Scalarpm10010mrDwlColdRestartProcessed | read-only | current | Cold Restart :This OID indicates that the module last restart was a Cold RESTART |
| 1.3.6.1.4.1.20044.63.8.1.1 | Nodepm10010mrDwlswBanksUsed | |||
| 1.3.6.1.4.1.20044.63.8.1.1.1 | Scalarpm10010mrDwlSwBank1Used | read-only | current | SW bank 1 active :This OID indicates the module is working on SW bank 1 <Help> This status indicates if the SW bank 1 is active or standby |
| 1.3.6.1.4.1.20044.63.8.1.1.2 | Scalarpm10010mrDwlSwBank2Used | read-only | current | SW bank 2 active :This OID indicates the module is working on SW bank 2 <Help> This status indicates if the SW bank 2 is active or standby |
| 1.3.6.1.4.1.20044.63.8.1.1.5 | Scalarpm10010mrDwlSwBank1Notempty | read-only | current | SW bank 1 loaded :This OID indicates a software is loaded in SW bank 1 <Help> This status indicates if the SW bank 1 contains SW package |
| 1.3.6.1.4.1.20044.63.8.1.1.6 | Scalarpm10010mrDwlSwBank2Notempty | read-only | current | SW bank 2 loaded :This OID indicates a software is loaded in SW bank 2 <Help> This status indicates if the SW bank 2 contains SW package |
| 1.3.6.1.4.1.20044.63.8.1.2 | Nodepm10010mrDwlgwBanksUsed | |||
| 1.3.6.1.4.1.20044.63.8.1.2.1 | Scalarpm10010mrDwlGwBank1Used | read-only | current | GW bank 1 active :This OID indicates the module is working on GW bank 1 <Help> This status indicates if the GW bank 1 is active or standby |
| 1.3.6.1.4.1.20044.63.8.1.2.2 | Scalarpm10010mrDwlGwBank2Used | read-only | current | GW bank 2 active :This OID indicates the module is working on GW bank 2 |
| 1.3.6.1.4.1.20044.63.8.1.2.3 | Scalarpm10010mrDwlGwBank3Used | read-only | current | GW bank 3 active :This OID indicates the module is working on GW bank 3 <Help> This status indicates if the GW bank 3 is active or standby |
| 1.3.6.1.4.1.20044.63.8.1.2.4 | Scalarpm10010mrDwlGwBank4Used | read-only | current | GW bank 4 active :This OID indicates the module is working on GW bank 4 |
| 1.3.6.1.4.1.20044.63.8.1.2.5 | Scalarpm10010mrDwlGwBank1Notempty | read-only | current | GW bank 1 loaded :This OID indicates a gateware is loaded in GW bank 1 <Help> This status indicates if the GW bank 1 contains GW package |
| 1.3.6.1.4.1.20044.63.8.1.2.6 | Scalarpm10010mrDwlGwBank2Notempty | read-only | current | GW bank 2 loaded :This OID indicates a gateware is loaded in GW bank 2 |
| 1.3.6.1.4.1.20044.63.8.1.2.7 | Scalarpm10010mrDwlGwBank3Notempty | read-only | current | GW bank 3 loaded :This OID indicates a gateware is loaded in GW bank 3 <Help> This status indicates if the GW bank 3 contains GW package |
| 1.3.6.1.4.1.20044.63.8.1.2.8 | Scalarpm10010mrDwlGwBank4Notempty | read-only | current | GW bank 4 loaded :This OID indicates a gateware is loaded in GW bank 4 |
| 1.3.6.1.4.1.20044.63.8.2 | Nodepm10010mrDwlClient | |||
| 1.3.6.1.4.1.20044.63.8.3 | Nodepm10010mrDwlLine | |||
| 1.3.6.1.4.1.20044.63.9 | Nodepm10010mrConfig | |||
| 1.3.6.1.4.1.20044.63.9.1 | Nodepm10010mrCfgAccessCAisCsf | |||
| 1.3.6.1.4.1.20044.63.9.1.1 | Tablepm10010mrCfgClientcaiscsfTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.63.9.1.1.1 | Rowpm10010mrCfgClientcaiscsfEntry | not-accessible | current | Row definition for the accessCAisCsf table |
| 1.3.6.1.4.1.20044.63.9.1.1.1.1 | Columnpm10010mrCfgClientcaiscsfIndex | read-only | current | Index definition for the clientcaiscsf table |
| 1.3.6.1.4.1.20044.63.9.1.1.1.3 | Columnpm10010mrCfgReservePortn | read-write | current | CAIS mode on Client Port :This register enables/disables port laser shutdown on CAIS insertion condition |
| 1.3.6.1.4.1.20044.63.9.2 | Nodepm10010mrCfgStartup | |||
| 1.3.6.1.4.1.20044.63.9.2.1 | Tablepm10010mrCfgClientStartupTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.63.9.2.1.1 | Rowpm10010mrCfgClientStartupEntry | not-accessible | current | Row definition for the startup table |
| 1.3.6.1.4.1.20044.63.9.2.1.1.1 | Columnpm10010mrCfgClientStartupIndex | read-only | current | Index definition for the clientStartup table |
| 1.3.6.1.4.1.20044.63.9.2.1.1.3 | Columnpm10010mrCfgSystConfPortPortn | read-write | current | Default Settings on Client Port :This register configures the default initialisation settings on the port. |
| 1.3.6.1.4.1.20044.63.9.2.1.1.4 | Columnpm10010mrCfgNetConfPortPortn | read-write | current | Default Settings on Client Port :This register configures the default initialisation settings on the port. |
| 1.3.6.1.4.1.20044.63.9.2.1.1.6 | Columnpm10010mrCfgIgnoreTimePortn | read-write | current | Default Settings on Client Port :This register configures the default initialisation settings on the port. |
| 1.3.6.1.4.1.20044.63.9.2.1.1.14 | Columnpm10010mrCfgOptionsPortPortn | read-write | current | Default Options on Client Port :This register configures the default options on the port. |
| 1.3.6.1.4.1.20044.63.9.2.2 | Tablepm10010mrCfgLineStartupTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.63.9.2.2.1 | Rowpm10010mrCfgLineStartupEntry | not-accessible | current | Row definition for the startup table |
| 1.3.6.1.4.1.20044.63.9.2.2.1.1 | Columnpm10010mrCfgLineStartupIndex | read-only | current | Index definition for the lineStartup table |
| 1.3.6.1.4.1.20044.63.9.2.2.1.3 | Columnpm10010mrCfgSystConfLinePortn | read-write | current | Default Settings on Line :This register configures the default initialisation settings on Line |
| 1.3.6.1.4.1.20044.63.9.2.2.1.14 | Columnpm10010mrCfgOptionsLinePortn | read-write | current | Default Options on Line :This register configures the default options on the line |
| 1.3.6.1.4.1.20044.63.9.2.3 | Tablepm10010mrCfgXfpTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.63.9.2.3.1 | Rowpm10010mrCfgXfpEntry | not-accessible | current | Row definition for the startup table |
| 1.3.6.1.4.1.20044.63.9.2.3.1.1 | Columnpm10010mrCfgXfpIndex | read-only | current | Index definition for the xfp table |
| 1.3.6.1.4.1.20044.63.9.2.3.1.3 | Columnpm10010mrCfgSystConfMsaLinePortn | read-write | current | Default settings on MSA :This register configures the default initialisation settings on MSA |
| 1.3.6.1.4.1.20044.63.9.3 | Nodepm10010mrCfgLabels | |||
| 1.3.6.1.4.1.20044.63.9.3.1 | Tablepm10010mrCfgLabelclientTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.63.9.3.1.1 | Rowpm10010mrCfgLabelclientEntry | not-accessible | current | Row definition for the labels table |
| 1.3.6.1.4.1.20044.63.9.3.1.1.1 | Columnpm10010mrCfgLabelclientIndex | read-only | current | Index definition for the labelclient table |
| 1.3.6.1.4.1.20044.63.9.3.1.1.3 | Columnpm10010mrCfgLabelclientPortn | read-write | current | Default settings on the label of the Ports :These registers configures the default initialisation settings of the labels of the ports. |
| 1.3.6.1.4.1.20044.63.9.3.2 | Tablepm10010mrCfgLabellineTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.63.9.3.2.1 | Rowpm10010mrCfgLabellineEntry | not-accessible | current | Row definition for the labels table |
| 1.3.6.1.4.1.20044.63.9.3.2.1.1 | Columnpm10010mrCfgLabellineIndex | read-only | current | Index definition for the labelline table |
| 1.3.6.1.4.1.20044.63.9.3.2.1.3 | Columnpm10010mrCfgLabellinePortn | read-write | current | Default settings on the label of the lines :These registers configures the default initialisation settings of the labels of the lines. |
| 1.3.6.1.4.1.20044.63.9.4 | Nodepm10010mrCfgStartuptlh | |||
| 1.3.6.1.4.1.20044.63.9.4.1 | Tablepm10010mrCfgOtxtlhTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.63.9.4.1.1 | Rowpm10010mrCfgOtxtlhEntry | not-accessible | current | Row definition for the startuptlh table |
| 1.3.6.1.4.1.20044.63.9.4.1.1.1 | Columnpm10010mrCfgOtxtlhIndex | read-only | current | Index definition for the otxtlh table |
| 1.3.6.1.4.1.20044.63.9.4.1.1.6 | Columnpm10010mrCfgLinePwrLaserPortn | read-write | current | Defaut Line output Power :This register configures the start-up output power of the Line tranceiver (Unit = dBm) |
| 1.3.6.1.4.1.20044.63.9.4.1.1.7 | Columnpm10010mrCfgLineFCurrentPortn | read-write | current | Default Line transceiver Tx Channel :This register configures the start-up laser channel of the Line Tx transceiver |
| 1.3.6.1.4.1.20044.63.9.4.1.1.8 | Columnpm10010mrCfgLineGridCurrentPortn | read-write | current | Default Line transceiver Grid :This register configures the start-up laser grid of the Line transceiver |
| 1.3.6.1.4.1.20044.63.9.4.1.1.9 | Columnpm10010mrCfgFPortn | read-write | current | Default Line TRX lowest Freq :This register configures the start-up lowest frequency of the Line transceiver |
| 1.3.6.1.4.1.20044.63.9.4.1.1.10 | Columnpm10010mrCfgRxLineFCurrentPortn | read-write | current | Default Line transceiver Rx Channel :This register configures the start-up laser channel of the Line Rx transceiver |
| 1.3.6.1.4.1.20044.63.9.5 | Nodepm10010mrCfgOther | |||
| 1.3.6.1.4.1.20044.63.9.5.1 | Nodepm10010mrtablemoduleOther | |||
| 1.3.6.1.4.1.20044.63.9.5.1.2 | Scalarpm10010mrCfgmode | read-write | current | Default settings on Module :This register selects the configuration mode of the module |
| 1.3.6.1.4.1.20044.63.9.5.1.3 | Scalarpm10010mrCfgfanLowSpeedThreshold | read-write | current | Default settings on Module :This register selects the speed threshold of the fan's |
| 1.3.6.1.4.1.20044.63.9.5.1.4 | Scalarpm10010mrCfgfanHighSpeedThreshold | read-write | current | Default settings on Module :This register selects the speed threshold of the fan's |
| 1.3.6.1.4.1.20044.63.9.6 | Nodepm10010mrCfgStartuptablefive | |||
| 1.3.6.1.4.1.20044.63.9.6.1 | Tablepm10010mrCfgOtxtlhcapabilitiesTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.63.9.6.1.1 | Rowpm10010mrCfgOtxtlhcapabilitiesEntry | not-accessible | current | Row definition for the startuptablefive table |
| 1.3.6.1.4.1.20044.63.9.6.1.1.1 | Columnpm10010mrCfgOtxtlhcapabilitiesIndex | read-only | current | Index definition for the otxtlhcapabilities table |
| 1.3.6.1.4.1.20044.63.9.6.1.1.3 | Columnpm10010mrCfgComponentTypePortn | read-only | current | Component parameters :This OID defines the component parameters |
| 1.3.6.1.4.1.20044.63.9.6.1.1.4 | Columnpm10010mrCfgMiscellaneousPortn | read-only | current | Miscellaneous default settings :This OID defines the miscellaneous parameters |
| 1.3.6.1.4.1.20044.63.9.6.1.1.5 | Columnpm10010mrCfgFirstChannelPortn | read-only | current | Number of the first channel of the component :This OID defines the first channel number of the PM |
| 1.3.6.1.4.1.20044.63.9.6.1.1.6 | Columnpm10010mrCfgLastChannelPortn | read-only | current | Number of the last channel of the component :This OID defines the last channel number of the PM |
| 1.3.6.1.4.1.20044.63.9.6.1.1.7 | Columnpm10010mrCfgGridPortn | read-only | current | Grid value of the component :This OID defines the grid of the PM |
| 1.3.6.1.4.1.20044.63.9.257 | Scalarpm10010mrCfgWriteConfiguration | read-write | current | Write configuration to module:This OID writes the complete configuration to the module |
| 1.3.6.1.4.1.20044.63.10 | Nodepm10010mrtraps | |||
| 1.3.6.1.4.1.20044.63.10.2 | Scalarpm10010mrtrapPortNumber | read-only | current | Last port which generates a trap |
| 1.3.6.1.4.1.20044.63.10.3 | Scalarpm10010mrtrapLineNumber | read-only | current | Last Line which generates a trap |
| 1.3.6.1.4.1.20044.63.10.4 | Scalarpm10010mrtrapBoardNumber | read-only | current | Last module which generates a trap |
| 1.3.6.1.4.1.20044.63.10.30 | Notificationpm10010mrLineTrapNotUrgentGoesOn | current | Not urgent Line default is activated | |
| 1.3.6.1.4.1.20044.63.10.31 | Notificationpm10010mrLineTrapNotUrgentGoesOff | current | Not urgent Line default disappeared | |
| 1.3.6.1.4.1.20044.63.10.32 | Notificationpm10010mrLineTrapUrgentGoesOn | current | Urgent Line default is activated | |
| 1.3.6.1.4.1.20044.63.10.33 | Notificationpm10010mrLineTrapUrgentGoesOff | current | Urgent Line default disappeared | |
| 1.3.6.1.4.1.20044.63.10.34 | Notificationpm10010mrLineTrapCritGoesOn | current | Critical Line default is activated | |
| 1.3.6.1.4.1.20044.63.10.35 | Notificationpm10010mrLineTrapCritGoesOff | current | Critical Line default disappeared | |
| 1.3.6.1.4.1.20044.63.10.40 | Notificationpm10010mrClientTrapNotUrgentGoesOn | current | Not urgent client default is activated | |
| 1.3.6.1.4.1.20044.63.10.41 | Notificationpm10010mrClientTrapNotUrgentGoesOff | current | Not urgent client default disappeared | |
| 1.3.6.1.4.1.20044.63.10.42 | Notificationpm10010mrClientTrapUrgentGoesOn | current | Urgent client default is activated | |
| 1.3.6.1.4.1.20044.63.10.43 | Notificationpm10010mrClientTrapUrgentGoesOff | current | Urgent client default disappeared | |
| 1.3.6.1.4.1.20044.63.10.44 | Notificationpm10010mrClientTrapCritGoesOn | current | Critical client default is activated | |
| 1.3.6.1.4.1.20044.63.10.45 | Notificationpm10010mrClientTrapCritGoesOff | current | Critical client default disappeared | |
| 1.3.6.1.4.1.20044.63.10.50 | Notificationpm10010mrPowerTrapUrgentGoesOn | current | Urgent power supply default is activated | |
| 1.3.6.1.4.1.20044.63.10.51 | Notificationpm10010mrPowerTrapUrgentGoesOff | current | Urgent power supply default disappeared | |
| 1.3.6.1.4.1.20044.63.11 | Nodepm10010mrMonitoring | |||
| 1.3.6.1.4.1.20044.63.11.1 | Nodepm10010mrMonOther | |||
| 1.3.6.1.4.1.20044.63.11.1.3 | Nodepm10010mrMonRmon | |||
| 1.3.6.1.4.1.20044.63.11.2 | Nodepm10010mrMonClient | |||
| 1.3.6.1.4.1.20044.63.11.2.4 | Nodepm10010mrMonClientRmonCounter | |||
| 1.3.6.1.4.1.20044.63.11.2.4.16 | Tablepm10010mrMonupRmonBytesCounterClientInputTable | not-accessible | current | List of pm10010mrMonupRmonBytesCounterClientInput Article |
| 1.3.6.1.4.1.20044.63.11.2.4.16.1 | Rowpm10010mrMonupRmonBytesCounterClientInputEntry | not-accessible | current | Row definition for the pm10010mrMonupRmonBytesCounterClientInput table |
| 1.3.6.1.4.1.20044.63.11.2.4.16.1.1 | Columnpm10010mrMonupRmonBytesCounterClientInputIndex | read-only | current | Index definition for the pm10010mrMonupRmonBytesCounterClientInput table |
| 1.3.6.1.4.1.20044.63.11.2.4.16.1.2 | Columnpm10010mrMonupRmonBytesCounterClientInputValuePortn | read-only | current | Client Input Bytes :This counter is increased each time a data byte is received on the client port <Help> This counter gives the number of bytes received on th… |
| 1.3.6.1.4.1.20044.63.11.2.4.16.1.3 | Columnpm10010mrMonupRmonBytesCounterClientInputErrorPortn | read-only | current | Bytes Counter Error :This OID when set indicates the Bytes counter value is invalid on client port |
| 1.3.6.1.4.1.20044.63.11.2.4.16.1.4 | Columnpm10010mrMonupRmonBytesCounterClientInputOverloadPortn | read-only | current | Bytes Counter Overload :This OID when set indicates a Bytes counter overload on client port |
| 1.3.6.1.4.1.20044.63.11.2.4.32 | Tablepm10010mrMonupRmonCrcErrorsCounterClientInputTable | not-accessible | current | List of pm10010mrMonupRmonCrcErrorsCounterClientInput Article |
| 1.3.6.1.4.1.20044.63.11.2.4.32.1 | Rowpm10010mrMonupRmonCrcErrorsCounterClientInputEntry | not-accessible | current | Row definition for the pm10010mrMonupRmonCrcErrorsCounterClientInput table |
| 1.3.6.1.4.1.20044.63.11.2.4.32.1.1 | Columnpm10010mrMonupRmonCrcErrorsCounterClientInputIndex | read-only | current | Index definition for the pm10010mrMonupRmonCrcErrorsCounterClientInput table |
| 1.3.6.1.4.1.20044.63.11.2.4.32.1.2 | Columnpm10010mrMonupRmonCrcErrorsCounterClientInputValuePortn | read-only | current | Client Input B1/CRC Errors :This counter is increased each time a B1/FCS error is detected on the client port <Help> This counter gives the number of B1/FCS Er… |
| 1.3.6.1.4.1.20044.63.11.2.4.32.1.3 | Columnpm10010mrMonupRmonCrcErrorsCounterClientInputErrorPortn | read-only | current | B1/FCS Errors Counter Error :This OID when set indicates the B1/FCS Errors counter value is invalid on client port |
| 1.3.6.1.4.1.20044.63.11.2.4.32.1.4 | Columnpm10010mrMonupRmonCrcErrorsCounterClientInputOverloadPortn | read-only | current | B1/FCS Errors Counter Overload :This OID when set indicates a B1/FCS Errors counter overload on client port |
| 1.3.6.1.4.1.20044.63.11.2.4.48 | Tablepm10010mrMonupRmonPacketsCounterClientInputTable | not-accessible | current | List of pm10010mrMonupRmonPacketsCounterClientInput Article |
| 1.3.6.1.4.1.20044.63.11.2.4.48.1 | Rowpm10010mrMonupRmonPacketsCounterClientInputEntry | not-accessible | current | Row definition for the pm10010mrMonupRmonPacketsCounterClientInput table |
| 1.3.6.1.4.1.20044.63.11.2.4.48.1.1 | Columnpm10010mrMonupRmonPacketsCounterClientInputIndex | read-only | current | Index definition for the pm10010mrMonupRmonPacketsCounterClientInput table |
| 1.3.6.1.4.1.20044.63.11.2.4.48.1.2 | Columnpm10010mrMonupRmonPacketsCounterClientInputValuePortn | read-only | current | Client Input Packets :This counter is increased each time a packet is received on the client port <Help> This counter gives the number of packets received on t… |
| 1.3.6.1.4.1.20044.63.11.2.4.48.1.3 | Columnpm10010mrMonupRmonPacketsCounterClientInputErrorPortn | read-only | current | Packets Counter Error :This OID when set indicates the Packets counter value is invalid on client port |
| 1.3.6.1.4.1.20044.63.11.2.4.48.1.4 | Columnpm10010mrMonupRmonPacketsCounterClientInputOverloadPortn | read-only | current | Packets Counter Overload :This OID when set indicates a Packets counter overload on client port |
| 1.3.6.1.4.1.20044.63.11.2.4.64 | Tablepm10010mrMonupRmonBroadcastCounterClientInputTable | not-accessible | current | List of pm10010mrMonupRmonBroadcastCounterClientInput Article |
| 1.3.6.1.4.1.20044.63.11.2.4.64.1 | Rowpm10010mrMonupRmonBroadcastCounterClientInputEntry | not-accessible | current | Row definition for the pm10010mrMonupRmonBroadcastCounterClientInput table |
| 1.3.6.1.4.1.20044.63.11.2.4.64.1.1 | Columnpm10010mrMonupRmonBroadcastCounterClientInputIndex | read-only | current | Index definition for the pm10010mrMonupRmonBroadcastCounterClientInput table |
| 1.3.6.1.4.1.20044.63.11.2.4.64.1.2 | Columnpm10010mrMonupRmonBroadcastCounterClientInputValuePortn | read-only | current | Client Input Broadcast Packets :This counter is increased each time a broadcast packet is received on the client port <Help> This counter gives the number of B… |
| 1.3.6.1.4.1.20044.63.11.2.4.64.1.3 | Columnpm10010mrMonupRmonBroadcastCounterClientInputErrorPortn | read-only | current | Broadcast Counter Error :This OID when set indicates the Broadcast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.63.11.2.4.64.1.4 | Columnpm10010mrMonupRmonBroadcastCounterClientInputOverloadPortn | read-only | current | Broadcast Counter Overload :This OID when set indicates a Broadcast counter overload on client port |
| 1.3.6.1.4.1.20044.63.11.2.4.80 | Tablepm10010mrMonupRmonMulticastCounterClientInputTable | not-accessible | current | List of pm10010mrMonupRmonMulticastCounterClientInput Article |
| 1.3.6.1.4.1.20044.63.11.2.4.80.1 | Rowpm10010mrMonupRmonMulticastCounterClientInputEntry | not-accessible | current | Row definition for the pm10010mrMonupRmonMulticastCounterClientInput table |
| 1.3.6.1.4.1.20044.63.11.2.4.80.1.1 | Columnpm10010mrMonupRmonMulticastCounterClientInputIndex | read-only | current | Index definition for the pm10010mrMonupRmonMulticastCounterClientInput table |
| 1.3.6.1.4.1.20044.63.11.2.4.80.1.2 | Columnpm10010mrMonupRmonMulticastCounterClientInputValuePortn | read-only | current | Client Input Multicast Packets :This counter is increased each time a Multicast packet is received on the client port <Help> This counter gives the number of M… |
| 1.3.6.1.4.1.20044.63.11.2.4.80.1.3 | Columnpm10010mrMonupRmonMulticastCounterClientInputErrorPortn | read-only | current | Multicast Counter Error :This OID when set indicates the Multicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.63.11.2.4.80.1.4 | Columnpm10010mrMonupRmonMulticastCounterClientInputOverloadPortn | read-only | current | Multicast Counter Overload :This OID when set indicates a Multicast counter overload on client port |
| 1.3.6.1.4.1.20044.63.11.2.4.96 | Tablepm10010mrMonupRmonPauseFrameCounterClientInputTable | not-accessible | current | List of pm10010mrMonupRmonPauseFrameCounterClientInput Article |
| 1.3.6.1.4.1.20044.63.11.2.4.96.1 | Rowpm10010mrMonupRmonPauseFrameCounterClientInputEntry | not-accessible | current | Row definition for the pm10010mrMonupRmonPauseFrameCounterClientInput table |
| 1.3.6.1.4.1.20044.63.11.2.4.96.1.1 | Columnpm10010mrMonupRmonPauseFrameCounterClientInputIndex | read-only | current | Index definition for the pm10010mrMonupRmonPauseFrameCounterClientInput table |
| 1.3.6.1.4.1.20044.63.11.2.4.96.1.2 | Columnpm10010mrMonupRmonPauseFrameCounterClientInputValuePortn | read-only | current | Client Input Pause Frames :This counter is increased each time a Pause frame is received on the client port <Help> This counter gives the number of Pause frame… |
| 1.3.6.1.4.1.20044.63.11.2.4.96.1.3 | Columnpm10010mrMonupRmonPauseFrameCounterClientInputErrorPortn | read-only | current | Pause Counter Error :This OID when set indicates the Pause counter value is invalid on client port |
| 1.3.6.1.4.1.20044.63.11.2.4.96.1.4 | Columnpm10010mrMonupRmonPauseFrameCounterClientInputOverloadPortn | read-only | current | Pause Counter Overload :This OID when set indicates a Pause counter overload on client port |
| 1.3.6.1.4.1.20044.63.11.2.4.224 | Tablepm10010mrMondwRmonCrcErrorsCounterClientInputTable | not-accessible | current | List of pm10010mrMondwRmonCrcErrorsCounterClientInput Article |
| 1.3.6.1.4.1.20044.63.11.2.4.224.1 | Rowpm10010mrMondwRmonCrcErrorsCounterClientInputEntry | not-accessible | current | Row definition for the pm10010mrMondwRmonCrcErrorsCounterClientInput table |
| 1.3.6.1.4.1.20044.63.11.2.4.224.1.1 | Columnpm10010mrMondwRmonCrcErrorsCounterClientInputIndex | read-only | current | Index definition for the pm10010mrMondwRmonCrcErrorsCounterClientInput table |
| 1.3.6.1.4.1.20044.63.11.2.4.224.1.2 | Columnpm10010mrMondwRmonCrcErrorsCounterClientInputValuePortn | read-only | current | Client Output B1/CRC Errors :This counter is increased each time a B1/FCS error is detected on the output client port <Help> This counter gives the number of B… |
| 1.3.6.1.4.1.20044.63.11.2.4.224.1.3 | Columnpm10010mrMondwRmonCrcErrorsCounterClientInputErrorPortn | read-only | current | Output B1/FCS Errors Counter Error :This OID when set indicates the output B1/FCS Errors counter value is invalid on client port |
| 1.3.6.1.4.1.20044.63.11.2.4.224.1.4 | Columnpm10010mrMondwRmonCrcErrorsCounterClientInputOverloadPortn | read-only | current | Output B1/FCS Errors Counter Overload :This OID when set indicates an output B1/FCS Errors counter overload on client port |
| 1.3.6.1.4.1.20044.63.11.2.4.240 | Tablepm10010mrMondwRmonPacketsCounterClientInputTable | not-accessible | current | List of pm10010mrMondwRmonPacketsCounterClientInput Article |
| 1.3.6.1.4.1.20044.63.11.2.4.240.1 | Rowpm10010mrMondwRmonPacketsCounterClientInputEntry | not-accessible | current | Row definition for the pm10010mrMondwRmonPacketsCounterClientInput table |
| 1.3.6.1.4.1.20044.63.11.2.4.240.1.1 | Columnpm10010mrMondwRmonPacketsCounterClientInputIndex | read-only | current | Index definition for the pm10010mrMondwRmonPacketsCounterClientInput table |
| 1.3.6.1.4.1.20044.63.11.2.4.240.1.2 | Columnpm10010mrMondwRmonPacketsCounterClientInputValuePortn | read-only | current | Client Output Packets :This counter is increased each time a packet is transmitted on the client port. <Help> This counter gives the number of packets detected… |
| 1.3.6.1.4.1.20044.63.11.2.4.240.1.3 | Columnpm10010mrMondwRmonPacketsCounterClientInputErrorPortn | read-only | current | Output Packets Counter Error :This OID when set indicates the output Packets counter value is invalid on client port |
| 1.3.6.1.4.1.20044.63.11.2.4.240.1.4 | Columnpm10010mrMondwRmonPacketsCounterClientInputOverloadPortn | read-only | current | Output Packets Counter Overload :This OID when set indicates an output Packets counter overload on client port |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Pm10010mrAdjustValue | INTEGER { otxadjustvalue0(0), otxadjustvalue1(1), otxadjustvalue2(2), otxadjustvalue3(3), otxadjustvalue4(4), otxadjustvalue5(5), otxadjustvalue6(6), otxadjustvalue7(7), otxadjustvalue8(8), otxadjustvalue9(9), otxadjustvalue10(10) } | current | Different values in Adjust mode on OTX-TLH on client and line ports |
| Pm10010mrClientProtocol | INTEGER { protocolclientvalue0(0), protocolclientvalue1(1), protocolclientvalue2(2), protocolclientvalue3(3), protocolclientvalue4(4), protocolclientvalue5(5), protocolclientvalue6(6), protocolclientvalue7(7), protocolclientvalue8(8) } | current | Different values on the protocol on the client ports |
| Pm10010mrMultiRate | INTEGER { rate100Mhz(0), rate250Mhz(1), rate500Mhz(2), rate1Ghz(3) } | current | different rate for a client port |
| Pm10010mrOrxChannel | INTEGER | current | Channel selection on transceiver Rx line ports |
| Pm10010mrOtxChannel | INTEGER | current | Channel selection on transceiver Tx line ports |
| Pm10010mrOtxGrid | INTEGER { otxgrid200(200), otxgrid100(100), otxgrid50(50) } | current | Different grids on OTX-TLH on client and line ports |
| Pm10010mrOtxMode | INTEGER { otx80mode(1), otx60mode(2), otxadjustmode(4) } | current | Different modes on OTX-TLH on client and line ports |
| Pm10010mrProtocolMode | INTEGER { protocolmodevalue0(0), protocolmodevalue1(1), protocolmodevalue2(2), protocolmodevalue3(3) } | current | Different values on the protocol mode |
| Rm10010ClientIgnoreTimer | INTEGER { ignoretimerclientvalue0(0), ignoretimerclientvalue1(1), ignoretimerclientvalue2(2), ignoretimerclientvalue3(3), ignoretimerclientvalue4(4), ignoretimerclientvalue5(5), ignoretimerclientvalue6(6), ignoretimerclientvalue7(7), ignoretimerclientvalue8(8), ignoretimerclientvalue9(9), ignoretimerclientvalue10(10) } | current | Different values on the ignore timer on the client ports |