EKINOPS-Pm10010ulh-MIB
1019 objects
Creation.
Imported Objects
| EKINOPS-MIB | EkiApiState EkiMeasureType EkiMode ekinops EkiOnOff EkiProtocol EkiState EkiSynchroMode |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.20044.80 | IdentitymodulePm10010ulh | Creation. | ||
| 1.3.6.1.4.1.20044.80.2 | Nodepm10010ulhalarms | |||
| 1.3.6.1.4.1.20044.80.2.1 | Nodepm10010ulhAlmOther | |||
| 1.3.6.1.4.1.20044.80.2.1.1 | Nodepm10010ulhAlmOtherNurg | |||
| 1.3.6.1.4.1.20044.80.2.1.1.2 | Nodepm10010ulhAlmsynthAlm2 | |||
| 1.3.6.1.4.1.20044.80.2.1.1.2.1 | Scalarpm10010ulhAlmConfTableSave | read-only | current | PM Configuration Save :This OID is at 1 during the saving of a new configuration table in the module Flash memory. <Condtype> CONF_TABLE_SAVE <Probcause> infor… |
| 1.3.6.1.4.1.20044.80.2.1.1.2.2 | Scalarpm10010ulhAlmInvUpload | read-only | current | Inventory Upload :This OID is at 1 during the uploading of PM inventory information. <Condtype> INV_UPLOAD <Probcause> informationalStatus(1000) <Alarmtype> ot… |
| 1.3.6.1.4.1.20044.80.2.1.1.2.3 | Scalarpm10010ulhAlmConfTableLoad | read-only | current | PM Configuration Load :This OID is at 1 during the loading of configuration tables in the modules RAM. <Condtype> CONF_TABLE_LOAD <Probcause> informationalStat… |
| 1.3.6.1.4.1.20044.80.2.1.1.2.4 | Scalarpm10010ulhAlmCorrelatOff | read-only | current | Not Used :This OID, when set, indicates that alarm correlation is not being performed. <Condtype> CORRELAT_OFF <Probcause> informationalStatus(1000) <Alarmtype… |
| 1.3.6.1.4.1.20044.80.2.1.1.2.5 | Scalarpm10010ulhAlmMaintenanceOn | read-only | current | Maintenance Mode :This OID indicates that the RM is in maintenance mode. <Help> This alarm indicates that the maintenance mode is enabled on the PM <Condtype> … |
| 1.3.6.1.4.1.20044.80.2.1.2 | Nodepm10010ulhAlmOtherUrg | |||
| 1.3.6.1.4.1.20044.80.2.1.2.336 | Nodepm10010ulhAlmmodFanFail | |||
| 1.3.6.1.4.1.20044.80.2.1.2.336.1 | Scalarpm10010ulhAlmFanFail | read-only | current | Fan Module Failure :This OID indicates that the FAN unit inside the module is in fail condition <Help> This alarm indicates that the FAN is in a fail condition… |
| 1.3.6.1.4.1.20044.80.2.1.2.336.2 | Scalarpm10010ulhAlmFanHighSpeed | read-only | current | Fan High Speed :This OID indicates the fan is blowing at high speed <Help> This alarm indicates the fan is blowing at high speed <Condtype> FAN_HIGH_SPEED <Pro… |
| 1.3.6.1.4.1.20044.80.2.1.3 | Nodepm10010ulhAlmOtherCrit | |||
| 1.3.6.1.4.1.20044.80.2.1.3.0 | Nodepm10010ulhAlmsynthAlm0 | |||
| 1.3.6.1.4.1.20044.80.2.1.3.0.2 | Scalarpm10010ulhAlmFailFan | read-only | current | Fan Fail :This OID is at 1 when any fail occurs on the fan tray <Help> This alarm indicates that the Fan tray module is in a failure condition <Condtype> FAIL_… |
| 1.3.6.1.4.1.20044.80.2.1.3.0.9 | Scalarpm10010ulhAlmModGlobFail | read-only | current | Module Failure :This OID is set on detection of a failure originating from the RM <Help> This alarm is set on detection of a failure originating from the equip… |
| 1.3.6.1.4.1.20044.80.2.1.3.0.15 | Scalarpm10010ulhAlmDefFuseA | read-only | current | Fuse A Fail :This OID indicates that the fuse of the power input A is in fail condition <Help> Status of the Fuse A <Condtype> DEF_FUSE_A <Probcause> powerProb… |
| 1.3.6.1.4.1.20044.80.2.1.3.0.16 | Scalarpm10010ulhAlmDefFuseB | read-only | current | Fuse B Fail :This OID indicates that the fuse of the power input B is in fail condition <Help> Status of the Fuse B <Condtype> DEF_FUSE_B <Probcause> powerProb… |
| 1.3.6.1.4.1.20044.80.2.1.3.72 | Nodepm10010ulhAlmclientModuleState | |||
| 1.3.6.1.4.1.20044.80.2.1.3.72.1 | Scalarpm10010ulhAlmCfpInitialize | read-only | current | Client Trscv Initialize :This OID indicates the Client Trscv initialization is in progress <Help> Status indicating the Client Trscv initialization is in progr… |
| 1.3.6.1.4.1.20044.80.2.1.3.72.2 | Scalarpm10010ulhAlmCfpLowPower | read-only | current | Client Trscv Low Power :This OID indicates the Client Trscv is in low power state <Help> Status indicating the Client Trscv is in low power state <Condtype> CF… |
| 1.3.6.1.4.1.20044.80.2.1.3.72.3 | Scalarpm10010ulhAlmCfpHighPowerUp | read-only | current | Client Trscv High Power Up :This OID indicates the Client Trscv is leaving Low Power state <Help> Status indicating the Client Trscv is leaving Low Power state… |
| 1.3.6.1.4.1.20044.80.2.1.3.72.4 | Scalarpm10010ulhAlmCfpTxOff | read-only | current | Client Trscv Laser Shutdown :This OID indicates the Client Trscv Laser is OFF <Help> Status indicating the Client Trscv Laser is OFF <Condtype> CFP_TX_OFF <Pro… |
| 1.3.6.1.4.1.20044.80.2.1.3.72.5 | Scalarpm10010ulhAlmCfpTxTurnOn | read-only | current | Client Trscv Laser Turn On :This OID indicates the Client Trscv is turning on its laser <Help> Status indicating the Client Trscv is turning on its laser <Cond… |
| 1.3.6.1.4.1.20044.80.2.1.3.72.6 | Scalarpm10010ulhAlmCfpReady | read-only | current | Client Trscv Ready :This OID indicates the Client Trscv is ready to operate <Help> Status indicating the Client Trscv is ready to operate <Condtype> CFP_READY … |
| 1.3.6.1.4.1.20044.80.2.1.3.72.7 | Scalarpm10010ulhAlmCfpFault | read-only | current | Client Trscv Fault :This OID indicates the Client Trscv is in Fault state <Help> Status indicating the Client Trscv is in Fault state <Condtype> CFP_FAULT <Pro… |
| 1.3.6.1.4.1.20044.80.2.1.3.72.8 | Scalarpm10010ulhAlmCfpTxTurnOff | read-only | current | Client Trscv Laser Turn Off :This OID indicates the Client Trscv is turning off its laser <Help> Status indicating the Client Trscv is turning off its laser <C… |
| 1.3.6.1.4.1.20044.80.2.1.3.72.9 | Scalarpm10010ulhAlmCfpHighPowerDown | read-only | current | Client Trscv High Power Down :This OID indicates the Client Trscv is entering Low Power state <Help> Status indicating the Client Trscv is entering Low Power s… |
| 1.3.6.1.4.1.20044.80.2.1.3.73 | Nodepm10010ulhAlmclientModuleGeneralStatus | |||
| 1.3.6.1.4.1.20044.80.2.1.3.73.4 | Scalarpm10010ulhAlmCfpOutOfAlignment | read-only | current | Client Trscv Out Of Alignment :This OID indicates an Out of alignment on the Client Trscv Host Interface <Help> Alarm indicating an Out of alignment on the Cli… |
| 1.3.6.1.4.1.20044.80.2.1.3.73.5 | Scalarpm10010ulhAlmCfpRxNetworkLol | read-only | current | Client Trscv Rx Network Loss Of Lock :This OID indicates of Loss of Lock is dected on the Client Trscv Rx Network interface <Help> Alarm indicating of Loss of … |
| 1.3.6.1.4.1.20044.80.2.1.3.73.6 | Scalarpm10010ulhAlmCfpRxLos | read-only | current | Client Trscv Loss Of Signal :This OID indicates a Loss of Signal is detected on the Client Trscv <Help> Alarm indicating a Loss of Signal is detected on the Cl… |
| 1.3.6.1.4.1.20044.80.2.1.3.73.7 | Scalarpm10010ulhAlmCfpTxHostLol | read-only | current | Client Trscv Tx Host Loss Of Lock :This OID indicates of Loss of Lock is detected on the Client Trscv Tx Host interface <Help> Alarm indicating of Loss of Lock… |
| 1.3.6.1.4.1.20044.80.2.1.3.73.8 | Scalarpm10010ulhAlmCfpTxLosf | read-only | current | Client Trscv Loss Of Signal Functionality :This OID indicates a Loss of Signal functionality is detected on the Client Trscv <Help> Alarm indicating a Loss of … |
| 1.3.6.1.4.1.20044.80.2.1.3.73.9 | Scalarpm10010ulhAlmCfpTxCmuLol | read-only | current | Client Trscv CMU Loss Of Lock :This OID indicates a Clock Multiplier Unit Loss of Lock is detected on the Client Trscv <Help> Alarm indicating a Clock Multipli… |
| 1.3.6.1.4.1.20044.80.2.1.3.73.10 | Scalarpm10010ulhAlmCfpTxJitterPllLol | read-only | current | Client Trscv Tx Jitter PLL Loss Of Lock :This OID indicates a Tx Jitter PLL Loss of Lock is dtected on the Client Trscv <Help> Alarm indicating a Tx Jitter PLL… |
| 1.3.6.1.4.1.20044.80.2.1.3.73.11 | Scalarpm10010ulhAlmCfpLossOfRefclk | read-only | current | Client Trscv Loss Of Ref Clock :This OID indicates a Loss of Reference clock is detected on the Client Trscv <Help> Alarm indicating a Loss of Reference clock … |
| 1.3.6.1.4.1.20044.80.2.1.3.73.14 | Scalarpm10010ulhAlmCfpHwInterlock | read-only | current | Client Trscv Hardware Interlock :This OID indicates the Client Trscv power is higher than the cooling capacity <Help> Alarm indicating the Client Trscv power i… |
| 1.3.6.1.4.1.20044.80.2.1.3.74 | Nodepm10010ulhAlmclientGlobalAlarmSummary | |||
| 1.3.6.1.4.1.20044.80.2.1.3.74.1 | Scalarpm10010ulhAlmCfpSoftGlobAlarmTest | read-only | current | Client Trscv Global Alarm SW Test :This OID indicates the Client Trscv Global Alarm This OID is raised by SW request for test purpose <Help> Status indicating … |
| 1.3.6.1.4.1.20044.80.2.1.3.74.7 | Scalarpm10010ulhAlmCfpNetworkLaneAlarmWarning2 | read-only | current | Client Trscv Network Alarm And Warning 2 :This OID indicates at least one DDM is detected on the Client Trscv Network Interface <Help> Synthesis alarm indicati… |
| 1.3.6.1.4.1.20044.80.2.1.3.74.8 | Scalarpm10010ulhAlmCfpModuleState | read-only | current | Client Trscv Module State :This OID indicates the Client Trscv module state <Help> Synthesis alarm indicating the Client Trscv module state <Condtype> CFP_MODU… |
| 1.3.6.1.4.1.20044.80.2.1.3.74.9 | Scalarpm10010ulhAlmCfpModuleGeneralStatus | read-only | current | Client Trscv General Status :This OID indicates the Client Trscv module general status <Help> Synthesis alarm indicating the Client Trscv module general status… |
| 1.3.6.1.4.1.20044.80.2.1.3.74.10 | Scalarpm10010ulhAlmCfpModuleFault | read-only | current | Client Trscv Module Fault :This OID indicates at least one Fault is detected on the Client Trscv module <Help> Synthesis alarm indicating at least one Fault is… |
| 1.3.6.1.4.1.20044.80.2.1.3.74.11 | Scalarpm10010ulhAlmCfpModuleAlarmWarning1 | read-only | current | Client Trscv Module Alarm And Warning 1 :This OID indicates at least one DDM This OID is detected on the Client Trscv module <Help> Synthesis alarm indicating … |
| 1.3.6.1.4.1.20044.80.2.1.3.74.12 | Scalarpm10010ulhAlmCfpModuleAlarmWarning2 | read-only | current | Client Trscv Module Alarm And Warning 2 :This OID indicates at least one DDM is detected on the Client Trscv module <Help> Synthesis alarm indicating at least … |
| 1.3.6.1.4.1.20044.80.2.1.3.74.13 | Scalarpm10010ulhAlmCfpNetworkLaneAlarmWarning1 | read-only | current | Client Trscv Network Alarm And Warning 1 :This OID indicates at least one DDM is detected on the Client Trscv Network Interface <Help> Synthesis alarm indicati… |
| 1.3.6.1.4.1.20044.80.2.1.3.74.14 | Scalarpm10010ulhAlmCfpNetworkLaneFaultStatus | read-only | current | Client Trscv Network Fault And Status :This OID indicates at least one Fault or Status is detected on the Client Trscv Network Interface <Help> Synthesis alarm… |
| 1.3.6.1.4.1.20044.80.2.1.3.74.15 | Scalarpm10010ulhAlmCfpHostLaneFaultStatus | read-only | current | Client Trscv Host Fault And Status :This OID indicates at least one Fault or Status is detected on the Client Trscv Host Interface <Help> Synthesis alarm indic… |
| 1.3.6.1.4.1.20044.80.2.1.3.74.16 | Scalarpm10010ulhAlmCfpGlobAlarmAssertion | read-only | current | Client Trscv Global Alarm :This OID indicates at least one Fault or Status is detected on the Client Trscv module <Help> Synthesis alarm indicating at least on… |
| 1.3.6.1.4.1.20044.80.2.1.3.78 | Nodepm10010ulhAlmmsaModuleState | |||
| 1.3.6.1.4.1.20044.80.2.1.3.78.1 | Scalarpm10010ulhAlmMsaInitialize | read-only | current | Line Trscv Initialize :This OID indicates the Line Trscv initialization is in progress <Help> Status indicating the Line Trscv initialization is in progress <C… |
| 1.3.6.1.4.1.20044.80.2.1.3.78.2 | Scalarpm10010ulhAlmMsaLowPower | read-only | current | Line Trscv Low Power :This OID indicates the Line Trscv is in low power state <Help> Status indicating the Line Trscv is in low power state <Condtype> MSA_LOW_… |
| 1.3.6.1.4.1.20044.80.2.1.3.78.3 | Scalarpm10010ulhAlmMsaHighPowerUp | read-only | current | Line Trscv High Power Up :This OID indicates the Line Trscv is leaving Low Power state <Help> Status indicating the Line Trscv is leaving Low Power state <Cond… |
| 1.3.6.1.4.1.20044.80.2.1.3.78.4 | Scalarpm10010ulhAlmMsaTxOff | read-only | current | Line Trscv Laser Shutdown :This OID indicates the Line Trscv Laser is OFF <Help> Status indicating the Line Trscv Laser is OFF <Condtype> MSA_TX_OFF <Probcause… |
| 1.3.6.1.4.1.20044.80.2.1.3.78.5 | Scalarpm10010ulhAlmMsaTxTurnOn | read-only | current | Line Trscv Laser Turn On :This OID indicates the Line Trscv is turning on its laser <Help> Status indicating the Line Trscv is turning on its laser <Condtype> … |
| 1.3.6.1.4.1.20044.80.2.1.3.78.6 | Scalarpm10010ulhAlmMsaReady | read-only | current | Line Trscv Ready :This OID indicates the Line Trscv is ready to operate <Help> Status indicating the Line Trscv is ready to operate <Condtype> MSA_READY <Probc… |
| 1.3.6.1.4.1.20044.80.2.1.3.78.7 | Scalarpm10010ulhAlmMsaFault | read-only | current | Line Trscv Fault :This OID indicates the Line Trscv is in Fault state <Help> Status indicating the Line Trscv is in Fault state <Condtype> MSA_FAULT <Probcause… |
| 1.3.6.1.4.1.20044.80.2.1.3.78.8 | Scalarpm10010ulhAlmMsaTxTurnOff | read-only | current | Line Trscv Laser Turn Off :This OID indicates the Line Trscv is turning off its laser <Help> Status indicating the Line Trscv is turning off its laser <Condtyp… |
| 1.3.6.1.4.1.20044.80.2.1.3.78.9 | Scalarpm10010ulhAlmMsaHighPowerDown | read-only | current | Line Trscv High Power Down :This OID indicates the Line Trscv is entering Low Power state <Help> Status indicating the Line Trscv is entering Low Power state <… |
| 1.3.6.1.4.1.20044.80.2.1.3.79 | Nodepm10010ulhAlmmsaModuleGeneralStatus | |||
| 1.3.6.1.4.1.20044.80.2.1.3.79.4 | Scalarpm10010ulhAlmMsaOutOfAlignment | read-only | current | Line Trscv Out Of Alignment :This OID indicates an Out of alignment on the Line Trscv Host Interface <Help> Alarm indicating an Out of alignment on the Line Tr… |
| 1.3.6.1.4.1.20044.80.2.1.3.79.5 | Scalarpm10010ulhAlmMsaRxNetworkLol | read-only | current | Line Trscv Rx Network Loss Of Lock :This OID indicates of Loss of Lock is detected on the Line Trscv Rx Network interface <Help> Alarm indicating of Loss of Lo… |
| 1.3.6.1.4.1.20044.80.2.1.3.79.6 | Scalarpm10010ulhAlmMsaRxLos | read-only | current | Line Trscv Loss Of Signal :This OID indicates a Loss of Signal is detected on the Line Trscv <Help> Alarm indicating a Loss of Signal is detected on the Line T… |
| 1.3.6.1.4.1.20044.80.2.1.3.79.7 | Scalarpm10010ulhAlmMsaTxHostLol | read-only | current | Line Trscv Tx Host Loss Of Lock :This OID indicates of Loss of Lock is detected on the Line Trscv Tx Host interface <Help> Alarm indicating of Loss of Lock is … |
| 1.3.6.1.4.1.20044.80.2.1.3.79.8 | Scalarpm10010ulhAlmMsaTxLosf | read-only | current | Line Trscv Loss Of Signal Functionality :This OID indicates a Loss of Signal functionality is detected on the Line Trscv <Help> Alarm indicating a Loss of Sign… |
| 1.3.6.1.4.1.20044.80.2.1.3.79.9 | Scalarpm10010ulhAlmMsaTxCmuLol | read-only | current | Line Trscv CMU Loss Of Lock :This OID indicates a Clock Multiplier Unit Loss of Lock is detected on the Line Trscv <Help> Alarm indicating a Clock Multiplier U… |
| 1.3.6.1.4.1.20044.80.2.1.3.79.10 | Scalarpm10010ulhAlmMsaTxJitterPllLol | read-only | current | Line Trscv Tx Jitter PLL Loss Of Lock :This OID indicates a Tx Jitter PLL Loss of Lock is detected on the Line Trscv <Help> Alarm indicating a Tx Jitter PLL Lo… |
| 1.3.6.1.4.1.20044.80.2.1.3.79.11 | Scalarpm10010ulhAlmMsaLossOfRefclk | read-only | current | Line Trscv Loss Of Ref Clock :This OID indicates a Loss of Reference clock is detected on the Line Trscv <Help> Alarm indicating a Loss of Reference clock is d… |
| 1.3.6.1.4.1.20044.80.2.1.3.79.14 | Scalarpm10010ulhAlmMsaHwInterlock | read-only | current | Line Trscv Hardware Interlock :This OID indicates the Line Trscv power is higher than the cooling capacity <Help> Alarm indicating the Line Trscv power is high… |
| 1.3.6.1.4.1.20044.80.2.1.3.80 | Nodepm10010ulhAlmmsaGlobalAlarmSummary | |||
| 1.3.6.1.4.1.20044.80.2.1.3.80.1 | Scalarpm10010ulhAlmMsaSoftGlobAlarmTest | read-only | current | Line Trscv Global Alarm SW Test :This OID indicates the Line Trscv Global alarm This OID is raised by SW request for test purpose <Help> Status indicating the … |
| 1.3.6.1.4.1.20044.80.2.1.3.80.6 | Scalarpm10010ulhAlmMsaNetworkHostAlarmStatus | read-only | current | Line Trscv Network/Host Alarm Status :This OID indicates the state of the Network and Host interface of the Line Trscv <Help> Synthesis alarm indicating the al… |
| 1.3.6.1.4.1.20044.80.2.1.3.80.7 | Scalarpm10010ulhAlmMsaNetworkLaneAlarmWarning2 | read-only | current | Line Trscv Network Alarm And Warning 2 :This OID indicates at least one DDM This OID is detected on the Line Trscv Network Interface <Help> Synthesis alarm ind… |
| 1.3.6.1.4.1.20044.80.2.1.3.80.8 | Scalarpm10010ulhAlmMsaModuleState | read-only | current | Line Trscv Module State :This OID indicates the Line Trscv module state <Help> Synthesis alarm indicating the Line Trscv module state <Condtype> MSA_MODULE_STA… |
| 1.3.6.1.4.1.20044.80.2.1.3.80.9 | Scalarpm10010ulhAlmMsaModuleGeneralStatus | read-only | current | Line Trscv General Status :This OID indicates the Line Trscv module general <Help> Synthesis alarm indicating the Line Trscv module general status <Condtype> M… |
| 1.3.6.1.4.1.20044.80.2.1.3.80.10 | Scalarpm10010ulhAlmModuleFault | read-only | current | Line Trscv Module Fault :This OID indicates at least one Fault is detected on the Line Trscv module <Help> Synthesis alarm indicating at least one Fault is det… |
| 1.3.6.1.4.1.20044.80.2.1.3.80.11 | Scalarpm10010ulhAlmMsaModuleAlarmWarning1 | read-only | current | Line Trscv Module Alarm And Warning 1 :This OID indicates at least one DDM is detected on the Line Trscv module <Help> Synthesis alarm indicating at least one … |
| 1.3.6.1.4.1.20044.80.2.1.3.80.12 | Scalarpm10010ulhAlmMsaModuleAlarmWarning2 | read-only | current | Line Trscv Module Alarm And Warning 2 :This OID indicates at least one DDM is detected on the Line Trscv module <Help> Synthesis alarm indicating at least one … |
| 1.3.6.1.4.1.20044.80.2.1.3.80.13 | Scalarpm10010ulhAlmMsaNetworkLaneAlarmWarning1 | read-only | current | Line Trscv Network Alarm And Warning 1 :This OID indicates at least one DDM is detected on the Line Trscv Network Interface <Help> Synthesis alarm indicating a… |
| 1.3.6.1.4.1.20044.80.2.1.3.80.14 | Scalarpm10010ulhAlmMsaNetworkLaneFaultStatus | read-only | current | Line Trscv Network Fault And Status :This OID indicates at least one Fault or Status is detected on the Line Trscv Network Interface <Help> Synthesis alarm ind… |
| 1.3.6.1.4.1.20044.80.2.1.3.80.15 | Scalarpm10010ulhAlmMsaHostLaneFaultStatus | read-only | current | Line Trscv Host Fault And Status :This OID indicates at least one Fault or Status is detected on the Line Trscv Host Interface <Help> Synthesis alarm indicatin… |
| 1.3.6.1.4.1.20044.80.2.1.3.80.16 | Scalarpm10010ulhAlmMsaGlobAlarmAssertion | read-only | current | Line Trscv Global Alarm :This OID indicates at least one Fault or Status is detected on the Line Trscv module <Help> Synthesis alarm indicating at least one Al… |
| 1.3.6.1.4.1.20044.80.2.1.3.81 | Nodepm10010ulhAlmmsaNetworkTxAlignment | |||
| 1.3.6.1.4.1.20044.80.2.1.3.81.12 | Scalarpm10010ulhAlmNetTxTimingFault | read-only | current | Line Trscv Network Tx Timing Fault :This OID indicates a Tx Timing Fault is detected on the Line Trscv Network interface <Help> Alarm indicating a Tx Timing Fa… |
| 1.3.6.1.4.1.20044.80.2.1.3.81.13 | Scalarpm10010ulhAlmNetTxReferenceClockFault | read-only | current | Line Trscv Network Tx Ref Clock Fault :This OID indicates a Tx Reference Clock Fault is detected on the Line Trscv Network interface <Help> Alarm indicating a … |
| 1.3.6.1.4.1.20044.80.2.1.3.81.14 | Scalarpm10010ulhAlmNetTxCmuLockFault | read-only | current | Line Trscv Network Tx CMU Lock Fault :This OID indicates a Tx Clock Multiplier Unit Lock Fault is detected on the Line Trscv Network interface <Help> Alarm ind… |
| 1.3.6.1.4.1.20044.80.2.1.3.81.15 | Scalarpm10010ulhAlmNetTxOutOfAlignment | read-only | current | Line Trscv Network Tx Out Of Alignment :This OID indicates a Tx Out of Alignment is detected on the Line Trscv Network interface <Help> Alarm indicating a Tx O… |
| 1.3.6.1.4.1.20044.80.2.1.3.81.16 | Scalarpm10010ulhAlmNetTxLossOfAlignment | read-only | current | Line Trscv Network Tx Loss Of Alignment :This OID indicates a Tx Loss of Alignment is detected on the Line Trscv Network interface <Help> Alarm indicating a Tx… |
| 1.3.6.1.4.1.20044.80.2.1.3.82 | Nodepm10010ulhAlmmsaNetworkRxAlignment | |||
| 1.3.6.1.4.1.20044.80.2.1.3.82.12 | Scalarpm10010ulhAlmNetRxTimingFault | read-only | current | Line Trscv Network Rx Timing Fault :This OID indicates a Rx Timing Fault is detected on the Line Trscv Network interface <Help> Alarm indicating a Rx Timing Fa… |
| 1.3.6.1.4.1.20044.80.2.1.3.82.13 | Scalarpm10010ulhAlmNetRxOutOfAlignment | read-only | current | Line Trscv Network Rx Out Of Alignment :This OID indicates a Rx Out of Alignment is detected on the Line Trscv Network interface <Help> Alarm indicating a Rx O… |
| 1.3.6.1.4.1.20044.80.2.1.3.82.14 | Scalarpm10010ulhAlmNetRxLossOfAlignment | read-only | current | Line Trscv Network Rx Loss Of Alignment :This OID indicates a Rx Loss of Alignment is detected on the Line Trscv Network interface <Help> Alarm indicating a Rx… |
| 1.3.6.1.4.1.20044.80.2.1.3.82.15 | Scalarpm10010ulhAlmNetRxModemLockFault | read-only | current | Line Trscv Network Rx Modem Lock Fault :This OID indicates a Rx Modem Lock Fault is detected on the Line Trscv Network interface <Help> Alarm indicating a Rx M… |
| 1.3.6.1.4.1.20044.80.2.1.3.82.16 | Scalarpm10010ulhAlmNetRxModemSyncDetectFault | read-only | current | Line Trscv Network Rx Modem Sync Detect Fault :This OID indicates a Rx Modem Synchronisation Detection Fault is detected on the Line Trscv Network interface <H… |
| 1.3.6.1.4.1.20044.80.2.1.3.83 | Nodepm10010ulhAlmmsaNetworkHostNetworkAlarmSummary | |||
| 1.3.6.1.4.1.20044.80.2.1.3.83.11 | Scalarpm10010ulhAlmNetworkTxAlignment | read-only | current | Line Trscv Network Tx Alignment :This OID indicates a Tx Alignment Fault is detected on the Line Trscv Network interface <Help> Synthesis Alarm indicating a Tx… |
| 1.3.6.1.4.1.20044.80.2.1.3.83.12 | Scalarpm10010ulhAlmNetworkRxAlignment | read-only | current | Line Trscv Network Rx Alignment :This OID indicates a Rx Alignment Fault is detected on the Line Trscv Network interface <Help> Synthesis Alarm indicating a Rx… |
| 1.3.6.1.4.1.20044.80.2.1.3.83.13 | Scalarpm10010ulhAlmNetworkRxOtn | read-only | current | Line Trscv Network Rx OTN :This OID indicates a Rx OTN Fault is detected on the Line Trscv Network interface <Help> Synthesis Alarm indicating a Rx OTN Fault i… |
| 1.3.6.1.4.1.20044.80.2.1.3.83.14 | Scalarpm10010ulhAlmHostRxAlignment | read-only | current | Line Trscv Host Rx Alignment :This OID indicates a Rx Alignment Fault is detected on the Line Trscv Host interface <Help> Synthesis Alarm indicating a Rx Align… |
| 1.3.6.1.4.1.20044.80.2.1.3.83.15 | Scalarpm10010ulhAlmHostTxAlignment | read-only | current | Line Trscv Host Tx Alignment :This OID indicates a Tx Alignment Fault is detected on the Line Trscv Host interface <Help> Synthesis Alarm indicating a Tx Align… |
| 1.3.6.1.4.1.20044.80.2.1.3.83.16 | Scalarpm10010ulhAlmHostTxOtnStatus | read-only | current | Line Trscv Host Tx OTN :This OID indicates a Tx OTN Fault is detected on the Line Trscv Host interface <Help> Synthesis Alarm indicating a Tx OTN Fault is dete… |
| 1.3.6.1.4.1.20044.80.2.1.3.84 | Nodepm10010ulhAlmmsaHostTxAlignment | |||
| 1.3.6.1.4.1.20044.80.2.1.3.84.13 | Scalarpm10010ulhAlmHostTxDeskewLockFault | read-only | current | Line Trscv Host Tx Deskew Lock Fault :This OID indicates a Tx Deskew Lock Fault is detected on the Line Trscv Host interface <Help> Alarm indicating a Tx Deske… |
| 1.3.6.1.4.1.20044.80.2.1.3.84.14 | Scalarpm10010ulhAlmHostTxOutOfAlignment | read-only | current | Line Trscv Host Tx Out Of Alignment :This OID indicates a Tx Out of Alignment is detected on the Line Trscv Host interface <Help> Alarm indicating a Tx Out of … |
| 1.3.6.1.4.1.20044.80.2.1.3.84.15 | Scalarpm10010ulhAlmHostTxLossOfAlignment | read-only | current | Line Trscv Host Tx Loss Of Alignment :This OID indicates a Tx Loss of Alignment is detected on the Line Trscv Host interface <Help> Alarm indicating a Tx Loss … |
| 1.3.6.1.4.1.20044.80.2.1.3.84.16 | Scalarpm10010ulhAlmHostTxCdrLockFault | read-only | current | Line Trscv Host Tx CDR Lock Fault :This OID indicates a Tx Clock Data Recovery Lock Fault is detected on the Line Trscv Host interface <Help> Alarm indicating … |
| 1.3.6.1.4.1.20044.80.2.1.3.85 | Nodepm10010ulhAlmmsaHostRxAlignment | |||
| 1.3.6.1.4.1.20044.80.2.1.3.85.14 | Scalarpm10010ulhAlmHostRxCmuLockFault | read-only | current | Line Trscv Host Rx CMU Lock Fault :This OID indicates a Rx Clock Multiplier Unit Lock Fault is detected on the Line Trscv Host interface <Help> Alarm indicatin… |
| 1.3.6.1.4.1.20044.80.2.1.3.85.15 | Scalarpm10010ulhAlmHostRxOutOfAlignment | read-only | current | Line Trscv Host Rx Out Of Alignment :This OID indicates a Rx Out of Alignment is detected on the Line Trscv Host interface <Help> Alarm indicating a Rx Out of … |
| 1.3.6.1.4.1.20044.80.2.1.3.85.16 | Scalarpm10010ulhAlmHostRxLossOfAlignment | read-only | current | Line Trscv Host Rx Loss Of Alignment :This OID indicates a Rx Loss of Alignment is detected on the Line Trscv Host interface <Help> Alarm indicating a Rx Loss … |
| 1.3.6.1.4.1.20044.80.2.2 | Nodepm10010ulhAlmClient | |||
| 1.3.6.1.4.1.20044.80.2.2.1 | Nodepm10010ulhAlmClientNurg | |||
| 1.3.6.1.4.1.20044.80.2.2.1.88 | Tablepm10010ulhAlmclientNetworkLaneAlarmWarningTable | not-accessible | current | List of pm10010ulhAlmclientNetworkLaneAlarmWarning Article |
| 1.3.6.1.4.1.20044.80.2.2.1.88.1 | Rowpm10010ulhAlmclientNetworkLaneAlarmWarningEntry | not-accessible | current | Row definition for the pm10010ulhAlmclientNetworkLaneAlarmWarning table |
| 1.3.6.1.4.1.20044.80.2.2.1.88.1.1 | Columnpm10010ulhAlmclientNetworkLaneAlarmWarningIndex | read-only | current | Index definition for the pm10010ulhAlmclientNetworkLaneAlarmWarning table |
| 1.3.6.1.4.1.20044.80.2.2.1.88.1.2 | Columnpm10010ulhAlmClientRxPowerLowAlarmPortn | read-only | current | Client Trscv Rx Power Low Alarm :This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indic… |
| 1.3.6.1.4.1.20044.80.2.2.1.88.1.3 | Columnpm10010ulhAlmClientRxPowerLowWarningPortn | read-only | current | Client Trscv Rx Power Low Warning :This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM <Help> Warning i… |
| 1.3.6.1.4.1.20044.80.2.2.1.88.1.4 | Columnpm10010ulhAlmClientRxPowerHighWarningPortn | read-only | current | Client Trscv Rx Power High Warning :This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM <Help> Warning… |
| 1.3.6.1.4.1.20044.80.2.2.1.88.1.5 | Columnpm10010ulhAlmClientRxPowerHighAlarmPortn | read-only | current | Client Trscv Rx Power High Alarm :This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM <Help> Alarm ind… |
| 1.3.6.1.4.1.20044.80.2.2.1.88.1.6 | Columnpm10010ulhAlmLaserTempLowAlarmPortn | read-only | current | Client Trscv Laser Temp Low Alarm :This OID indicates that the Trscv Laser Temperature is lower than the threshold value written in the Trscv EEPROM <Help> Ala… |
| 1.3.6.1.4.1.20044.80.2.2.1.88.1.7 | Columnpm10010ulhAlmClientLaserTempLowWarningPortn | read-only | current | Client Trscv Laser Temp Low Warning :This OID indicates that the Trscv Laser Temperature is lower than the threshold value written in the Trscv EEPROM <Help> W… |
| 1.3.6.1.4.1.20044.80.2.2.1.88.1.8 | Columnpm10010ulhAlmClientLaserTempHighWarningPortn | read-only | current | Client Trscv Laser Temp High Warning :This OID indicates that the Trscv Laser Temperature is higher than the threshold value written in the Trscv EEPROM <Help>… |
| 1.3.6.1.4.1.20044.80.2.2.1.88.1.9 | Columnpm10010ulhAlmClientLaserTempHighAlarmPortn | read-only | current | Client Trscv Laser Temp High Alarm :This OID indicates that the Trscv Laser Temperature is higher than the threshold value written in the Trscv EEPROM <Help> A… |
| 1.3.6.1.4.1.20044.80.2.2.1.88.1.10 | Columnpm10010ulhAlmClientTxPowerLowAlarmPortn | read-only | current | Client Trscv Tx Power Low Alarm :This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indi… |
| 1.3.6.1.4.1.20044.80.2.2.1.88.1.11 | Columnpm10010ulhAlmClientTxPowerLowWarningPortn | read-only | current | Client Trscv Tx Power Low Warning :This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM <Help> Warning … |
| 1.3.6.1.4.1.20044.80.2.2.1.88.1.12 | Columnpm10010ulhAlmClientTxPowerHighWarningPortn | read-only | current | Client Trscv Tx Power High Warning :This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM <Help> Warnin… |
| 1.3.6.1.4.1.20044.80.2.2.1.88.1.13 | Columnpm10010ulhAlmClientTxPowerHighAlarmPortn | read-only | current | Client Trscv Tx Power High Alarm :This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM <Help> Alarm in… |
| 1.3.6.1.4.1.20044.80.2.2.1.88.1.14 | Columnpm10010ulhAlmClientBiasLowAlarmPortn | read-only | current | Client Trscv Bias Low Alarm :This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Alarm in… |
| 1.3.6.1.4.1.20044.80.2.2.1.88.1.15 | Columnpm10010ulhAlmClientBiasLowWarningPortn | read-only | current | Client Trscv Bias Low Warning :This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Warnin… |
| 1.3.6.1.4.1.20044.80.2.2.1.88.1.16 | Columnpm10010ulhAlmClientBiasHighWarningPortn | read-only | current | Client Trscv Bias High Warning :This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Warn… |
| 1.3.6.1.4.1.20044.80.2.2.1.88.1.17 | Columnpm10010ulhAlmClientBiasHighAlarmPortn | read-only | current | Client Trscv Bias High Alarm :This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Alarm … |
| 1.3.6.1.4.1.20044.80.2.2.1.272 | Tablepm10010ulhAlmclientSfpWarnDdmTable | not-accessible | current | List of pm10010ulhAlmclientSfpWarnDdm Article |
| 1.3.6.1.4.1.20044.80.2.2.1.272.1 | Rowpm10010ulhAlmclientSfpWarnDdmEntry | not-accessible | current | Row definition for the pm10010ulhAlmclientSfpWarnDdm table |
| 1.3.6.1.4.1.20044.80.2.2.1.272.1.1 | Columnpm10010ulhAlmclientSfpWarnDdmIndex | read-only | current | Index definition for the pm10010ulhAlmclientSfpWarnDdm table |
| 1.3.6.1.4.1.20044.80.2.2.1.272.1.2 | Columnpm10010ulhAlmTxPwLowWngPortn | read-only | current | Client Trscv Tx Power Low Warning :This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM <Help> Warning … |
| 1.3.6.1.4.1.20044.80.2.2.1.272.1.3 | Columnpm10010ulhAlmTxPwrHighWngPortn | read-only | current | Client Trscv Tx Power High Warning :This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM <Help> Warnin… |
| 1.3.6.1.4.1.20044.80.2.2.1.272.1.4 | Columnpm10010ulhAlmTxBiasLowWngPortn | read-only | current | Client Trscv Bias Low Warning :This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Warnin… |
| 1.3.6.1.4.1.20044.80.2.2.1.272.1.5 | Columnpm10010ulhAlmTxBiasHighWngPortn | read-only | current | Client Trscv Bias High Warning :This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Warn… |
| 1.3.6.1.4.1.20044.80.2.2.1.272.1.6 | Columnpm10010ulhAlmVccLowWngPortn | read-only | current | Client Trscv Power Supply Low Warning :This OID indicates that the Trscv power supply is lower than the threshold value written in the Trscv EEPROM <Help> Warn… |
| 1.3.6.1.4.1.20044.80.2.2.1.272.1.7 | Columnpm10010ulhAlmVccHighWngPortn | read-only | current | Client Trscv Power Supply High Warning :This OID indicates that the Trscv power supply is higher than the threshold value written in the Trscv EEPROM <Help> Wa… |
| 1.3.6.1.4.1.20044.80.2.2.1.272.1.8 | Columnpm10010ulhAlmTempLowWngPortn | read-only | current | Client Trscv Temp Low Warning :This OID indicates that the Trscv temperature is lower than the threshold value written in the Trscv EEPROM <Help> Warning indic… |
| 1.3.6.1.4.1.20044.80.2.2.1.272.1.9 | Columnpm10010ulhAlmTempHighWngPortn | read-only | current | Client Trscv Temp High Warning :This OID indicates that the Trscv temperature is higher than the threshold value written in the Trscv EEPROM <Help> Warning ind… |
| 1.3.6.1.4.1.20044.80.2.2.1.272.1.16 | Columnpm10010ulhAlmRxPwrLowWngPortn | read-only | current | Client Trscv Rx Power Low Warning :This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM <Help> Warning i… |
| 1.3.6.1.4.1.20044.80.2.2.1.272.1.17 | Columnpm10010ulhAlmRxPwrHighWngPortn | read-only | current | Client Trscv Rx Power High Warning :This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM <Help> Warning… |
| 1.3.6.1.4.1.20044.80.2.2.2 | Nodepm10010ulhAlmClientUrg | |||
| 1.3.6.1.4.1.20044.80.2.2.2.120 | Tablepm10010ulhAlmclientNetworkLaneFaultTable | not-accessible | current | List of pm10010ulhAlmclientNetworkLaneFault Article |
| 1.3.6.1.4.1.20044.80.2.2.2.120.1 | Rowpm10010ulhAlmclientNetworkLaneFaultEntry | not-accessible | current | Row definition for the pm10010ulhAlmclientNetworkLaneFault table |
| 1.3.6.1.4.1.20044.80.2.2.2.120.1.1 | Columnpm10010ulhAlmclientNetworkLaneFaultIndex | read-only | current | Index definition for the pm10010ulhAlmclientNetworkLaneFault table |
| 1.3.6.1.4.1.20044.80.2.2.2.120.1.4 | Columnpm10010ulhAlmClientLaneRxFifoErrorPortn | read-only | current | Client Network Lane Rx FIFO Error :This OID indicates a Rx FIFO Error on the Client Trscv Network Lane <Help> Alarm indicating a Rx FIFO Error on the Client Tr… |
| 1.3.6.1.4.1.20044.80.2.2.2.120.1.5 | Columnpm10010ulhAlmClientLaneRxLolPortn | read-only | current | Client Network Lane Rx Loss Of Lock :This OID indicates a Rx Loss of Lock on the Client Trscv Network Lane <Help> Alarm indicating a Rx Loss of Lock on the Cli… |
| 1.3.6.1.4.1.20044.80.2.2.2.120.1.6 | Columnpm10010ulhAlmClientLaneRxLosPortn | read-only | current | Client Network Lane Rx Loss Of Signal :This OID indicates a Rx Loss of Signal on the Client Trscv Network Lane <Help> Alarm indicating a Rx Loss of Signal on t… |
| 1.3.6.1.4.1.20044.80.2.2.2.120.1.8 | Columnpm10010ulhAlmClientLaneTxLolPortn | read-only | current | Client Network Lane Tx Loss Of Lock :This OID indicates a Tx Loss of Lock on the Client Trscv Network Lane <Help> Alarm indicating a Tx Loss of Lock on the Cli… |
| 1.3.6.1.4.1.20044.80.2.2.2.120.1.9 | Columnpm10010ulhAlmClientLaneTxLosfPortn | read-only | current | Client Network Lane Tx Loss Of Signal Functionality :This OID indicates a Tx Loss of Signal Functionality on the Client Trscv Network Lane <Help> Alarm indicat… |
| 1.3.6.1.4.1.20044.80.2.2.2.120.1.15 | Columnpm10010ulhAlmClientLaneApdPowerSupplyPortn | read-only | current | Client Network Lane APD Power Supply :This OID indicates an APD Power supply failure on the Client Trscv Network Lane <Help> Alarm indicating an APD Power supp… |
| 1.3.6.1.4.1.20044.80.2.2.2.120.1.16 | Columnpm10010ulhAlmClientLaneWavelengthUnlockedPortn | read-only | current | Client Network Lane Wavelength Unlock :This OID indicates a Wavelength unlock on the Client Trscv Network Lane <Help> Alarm indicating a Wavelength unlock on t… |
| 1.3.6.1.4.1.20044.80.2.2.2.120.1.17 | Columnpm10010ulhAlmClientLaneTecFaultPortn | read-only | current | Client Network Lane TEC Fault :This OID indicates a TEC Fault on the Client Trscv Network Lane <Help> Alarm indicating a TEC Fault on the Client Trscv Network … |
| 1.3.6.1.4.1.20044.80.2.2.2.152 | Tablepm10010ulhAlmclientHostLaneFaultTable | not-accessible | current | List of pm10010ulhAlmclientHostLaneFault Article |
| 1.3.6.1.4.1.20044.80.2.2.2.152.1 | Rowpm10010ulhAlmclientHostLaneFaultEntry | not-accessible | current | Row definition for the pm10010ulhAlmclientHostLaneFault table |
| 1.3.6.1.4.1.20044.80.2.2.2.152.1.1 | Columnpm10010ulhAlmclientHostLaneFaultIndex | read-only | current | Index definition for the pm10010ulhAlmclientHostLaneFault table |
| 1.3.6.1.4.1.20044.80.2.2.2.152.1.2 | Columnpm10010ulhAlmClientLossOfSyncPortn | read-only | current | Client Frame Alignment Loss :This OID indicates the module is not aligned with the incoming Client signal <Help> Alarm indicating the module is not aligned wit… |
| 1.3.6.1.4.1.20044.80.2.2.2.152.1.3 | Columnpm10010ulhAlmClientInputLossOfSigPortn | read-only | current | Client Input Loss Of Signal :This OID indicates a Loss of Signal is detected on the Client Trscv <Help> Alarm indicating a Loss of Signal is detected on the Cl… |
| 1.3.6.1.4.1.20044.80.2.2.2.152.1.4 | Columnpm10010ulhAlmClientLanesMarkerUnlockPortn | read-only | current | Client Lanes Marker Unlock :This OID indicates the Client lanes marker alignment is not lock <Help> Alarm indicating the Client lanes marker alignment is not l… |
| 1.3.6.1.4.1.20044.80.2.2.2.152.1.5 | Columnpm10010ulhAlmClientLanes6466UnlockPortn | read-only | current | Client Lanes 64/66b Unlock :This OID indicates the Client 64/66b decoder is not lock <Help> Alarm indicating the Client 64/66b decoder is not lock <Condtype> C… |
| 1.3.6.1.4.1.20044.80.2.2.2.152.1.6 | Columnpm10010ulhAlmClientLanesNotAlignedPortn | read-only | current | Client Lanes Not Aligned :This OID indicates the Client lanes are not aligned <Help> Alarm indicating the Client lanes are not aligned <Condtype> CLIENT_LANES_… |
| 1.3.6.1.4.1.20044.80.2.2.2.152.1.7 | Columnpm10010ulhAlmClientCsfDetectedPortn | read-only | current | Client Signal Fail Detected :This OID indicates that a CSF has been detected on client port in the downstream direction <Help> This alarm indicates if a Client… |
| 1.3.6.1.4.1.20044.80.2.2.2.152.1.10 | Columnpm10010ulhAlmClientTxHostLolPortn | read-only | current | Client Host Lane Tx Loss Of Lock :This OID indicates a Tx Loss of Lock on the Client Trscv Host Lane <Help> Alarm indicating a Tx Loss of Lock on the Client Tr… |
| 1.3.6.1.4.1.20044.80.2.2.2.152.1.11 | Columnpm10010ulhAlmClientLaneTxFifoErrorPortn | read-only | current | Client Host Lane Tx FIFO Error :This OID indicates a Tx FIFO Error on the Client Trscv Host Lane <Help> Alarm indicating a Tx FIFO Error on the Client Trscv Ho… |
| 1.3.6.1.4.1.20044.80.2.2.2.240 | Tablepm10010ulhAlmclientSfpAlmDdmTable | not-accessible | current | List of pm10010ulhAlmclientSfpAlmDdm Article |
| 1.3.6.1.4.1.20044.80.2.2.2.240.1 | Rowpm10010ulhAlmclientSfpAlmDdmEntry | not-accessible | current | Row definition for the pm10010ulhAlmclientSfpAlmDdm table |
| 1.3.6.1.4.1.20044.80.2.2.2.240.1.1 | Columnpm10010ulhAlmclientSfpAlmDdmIndex | read-only | current | Index definition for the pm10010ulhAlmclientSfpAlmDdm table |
| 1.3.6.1.4.1.20044.80.2.2.2.240.1.2 | Columnpm10010ulhAlmTxPwrLowAlaPortn | read-only | current | Client Trscv Tx Power Low :This OID indicates that the Trscv output power of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm in… |
| 1.3.6.1.4.1.20044.80.2.2.2.240.1.3 | Columnpm10010ulhAlmTxPwrHighAlaPortn | read-only | current | Client Trscv Tx Power High :This OID indicates that the Trscv output power of port is higher than the threshold value written in the Trscv EEPROM <Help> Alarm … |
| 1.3.6.1.4.1.20044.80.2.2.2.240.1.4 | Columnpm10010ulhAlmTxBiasLowAlaPortn | read-only | current | Client Trscv Bias Low :This OID indicates that the Trscv laser bias current of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm … |
| 1.3.6.1.4.1.20044.80.2.2.2.240.1.5 | Columnpm10010ulhAlmTxBiasHighAlaPortn | read-only | current | Client Trscv Bias High :This OID indicates that the Trscv laser bias current of port is higher than the threshold value written in the Trscv EEPROM <Help> Alar… |
| 1.3.6.1.4.1.20044.80.2.2.2.240.1.6 | Columnpm10010ulhAlmVccLowAlaPortn | read-only | current | Client Trscv Power Supply Low :This OID indicates that the Trscv power supply of port is lower than the threshold value written in the Trscv EEPROM <Help> Alar… |
| 1.3.6.1.4.1.20044.80.2.2.2.240.1.7 | Columnpm10010ulhAlmVccHighAlaPortn | read-only | current | Client Trscv Power Supply High :This OID indicates that the Trscv power supply of port is higher than the threshold value written in the Trscv EEPROM <Help> Al… |
| 1.3.6.1.4.1.20044.80.2.2.2.240.1.8 | Columnpm10010ulhAlmTempLowAlaPortn | read-only | current | Client Trscv Temp Low :This OID indicates that the Trscv temperature of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicat… |
| 1.3.6.1.4.1.20044.80.2.2.2.240.1.9 | Columnpm10010ulhAlmTempHighAlaPortn | read-only | current | Client Trscv Temp High :This OID indicates that the Trscv temperature of port is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indic… |
| 1.3.6.1.4.1.20044.80.2.2.2.240.1.16 | Columnpm10010ulhAlmRxPwrLowAlaPortn | read-only | current | Client Trscv Rx Power Low :This OID indicates that the Trscv input power of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm ind… |
| 1.3.6.1.4.1.20044.80.2.2.2.240.1.17 | Columnpm10010ulhAlmRxPwrHighAlaPortn | read-only | current | Client Trscv Rx Power High :This OID indicates that the Trscv input power of port is higher than the threshold value written in the Trscv EEPROM <Help> Alarm i… |
| 1.3.6.1.4.1.20044.80.2.2.3 | Nodepm10010ulhAlmClientCrit | |||
| 1.3.6.1.4.1.20044.80.2.2.3.8 | Tablepm10010ulhAlmsynthAlmPortTable | not-accessible | current | List of pm10010ulhAlmsynthAlmPort Article |
| 1.3.6.1.4.1.20044.80.2.2.3.8.1 | Rowpm10010ulhAlmsynthAlmPortEntry | not-accessible | current | Row definition for the pm10010ulhAlmsynthAlmPort table |
| 1.3.6.1.4.1.20044.80.2.2.3.8.1.1 | Columnpm10010ulhAlmsynthAlmPortIndex | read-only | current | Index definition for the pm10010ulhAlmsynthAlmPort table |
| 1.3.6.1.4.1.20044.80.2.2.3.8.1.2 | Columnpm10010ulhAlmSfpAbsentPortn | read-only | current | Client Optical Module Absent :This OID indicates that the Transceiver is not present in the client port. <Help> This alarm indicates if the client transceiver … |
| 1.3.6.1.4.1.20044.80.2.2.3.8.1.3 | Columnpm10010ulhAlmDdmAbsentPortn | read-only | current | DDM Supported On Client Trscv :This OID indicates that the Client transceiver supports the Digital Diagnostic Monitoring function <Help> This status indicates … |
| 1.3.6.1.4.1.20044.80.2.2.3.8.1.5 | Columnpm10010ulhAlmHwFailAccPortn | read-only | current | Client HW Fail :This OID indicates a failure on client port, most probably caused by a HW issue. <Help> This alarm indicates a failure on client port, most pro… |
| 1.3.6.1.4.1.20044.80.2.2.3.8.1.6 | Columnpm10010ulhAlmDwLsdPortn | read-only | current | Client Trscv Laser Shutdown :This OID indicates the Client transceiver laser is shutdown <Help> This status indicates if the client transceiver laser is shutdo… |
| 1.3.6.1.4.1.20044.80.2.2.3.8.1.7 | Columnpm10010ulhAlmClientLocalOosPortn | read-only | current | Local Client Port In Service :This OID indicates that the local Client port is In Service (1) or Out of Service (2) <Help> This status indicates if the local c… |
| 1.3.6.1.4.1.20044.80.2.2.3.8.1.8 | Columnpm10010ulhAlmClientRemoteOosPortn | read-only | current | Remote Client Port In Service :This OID indicates that the remote Client port is In Service (1) or Out of Service (2) <Help> This status indicates if the remot… |
| 1.3.6.1.4.1.20044.80.2.2.3.8.1.9 | Columnpm10010ulhAlmDwCaisPortn | read-only | current | Client AIS Inserted :This OID indicates a CAIS has been inserted on the output client port. <Help> This status indicates if a Client Alarm Indication Signal is… |
| 1.3.6.1.4.1.20044.80.2.2.3.8.1.10 | Columnpm10010ulhAlmSfpDdmWarningPortn | read-only | current | Warning On Client Trscv DDM :This OID indicates a warning is being received from the Client Transceiver DDM <Help> This alarm indicates if a DDM Warning has be… |
| 1.3.6.1.4.1.20044.80.2.2.3.8.1.11 | Columnpm10010ulhAlmSfpDdmAlmPortn | read-only | current | Alarm On Client Trscv DDM :This OID indicates an alarm is being received from the Client Transceiver DDM <Help> This alarm indicates if a DDM Alarm has been de… |
| 1.3.6.1.4.1.20044.80.2.2.3.8.1.13 | Columnpm10010ulhAlmFailAccPortn | read-only | current | Client Access Fail :This OID indicates a failure on the Client port <Help> This alarm indicates a failure on the Client port <Condtype> FAIL_ACC_1 <Probcause> … |
| 1.3.6.1.4.1.20044.80.2.2.3.8.1.17 | Columnpm10010ulhAlmUpCsfPortn | read-only | current | Client Signal Fail Inserted :This OID indicates a CSF has been inserted in the upstream client port. <Help> This status indicates if a Client Signal Fail is cu… |
| 1.3.6.1.4.1.20044.80.2.3 | Nodepm10010ulhAlmLine | |||
| 1.3.6.1.4.1.20044.80.2.3.1 | Nodepm10010ulhAlmLineNurg | |||
| 1.3.6.1.4.1.20044.80.2.3.1.184 | Tablepm10010ulhAlmlineNetworkLaneAlarmWarning1Table | not-accessible | current | List of pm10010ulhAlmlineNetworkLaneAlarmWarning1 Article |
| 1.3.6.1.4.1.20044.80.2.3.1.184.1 | Rowpm10010ulhAlmlineNetworkLaneAlarmWarning1Entry | not-accessible | current | Row definition for the pm10010ulhAlmlineNetworkLaneAlarmWarning1 table |
| 1.3.6.1.4.1.20044.80.2.3.1.184.1.1 | Columnpm10010ulhAlmlineNetworkLaneAlarmWarning1Index | read-only | current | Index definition for the pm10010ulhAlmlineNetworkLaneAlarmWarning1 table |
| 1.3.6.1.4.1.20044.80.2.3.1.184.1.2 | Columnpm10010ulhAlmLineRxPowerLowAlarmPortn | read-only | current | Line Trscv Rx Power Low Alarm :This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicat… |
| 1.3.6.1.4.1.20044.80.2.3.1.184.1.3 | Columnpm10010ulhAlmLineRxPowerLowWarningPortn | read-only | current | Line Trscv Rx Power Low Warning :This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM <Help> Warning ind… |
| 1.3.6.1.4.1.20044.80.2.3.1.184.1.4 | Columnpm10010ulhAlmLineRxPowerHighWarningPortn | read-only | current | Line Trscv Rx Power High Warning :This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM <Help> Warning i… |
| 1.3.6.1.4.1.20044.80.2.3.1.184.1.5 | Columnpm10010ulhAlmLineRxPowerHighAlarmPortn | read-only | current | Line Trscv Rx Power High Alarm :This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indic… |
| 1.3.6.1.4.1.20044.80.2.3.1.184.1.6 | Columnpm10010ulhAlmLineLaserTempLowAlarmPortn | read-only | current | Line Trscv Tx Laser Temp Low Alarm :This OID indicates that the Trscv Tx Laser Temperature is lower than the threshold value written in the Trscv EEPROM <Help>… |
| 1.3.6.1.4.1.20044.80.2.3.1.184.1.7 | Columnpm10010ulhAlmLineLaserTempLowWarningPortn | read-only | current | Line Trscv Tx Laser Temp Low Warning :This OID indicates that the Trscv Tx Laser Temperature is lower than the threshold value written in the Trscv EEPROM <Hel… |
| 1.3.6.1.4.1.20044.80.2.3.1.184.1.8 | Columnpm10010ulhAlmLineLaserTempHighWarningPortn | read-only | current | Line Trscv Tx Laser Temp High Warning :This OID indicates that the Trscv Tx Laser Temperature is higher than the threshold value written in the Trscv EEPROM <H… |
| 1.3.6.1.4.1.20044.80.2.3.1.184.1.9 | Columnpm10010ulhAlmLineLaserTempHighAlarmPortn | read-only | current | Line Trscv Tx Laser Temp High Alarm :This OID indicates that the Trscv Tx Laser Temperature is higher than the threshold value written in the Trscv EEPROM <Hel… |
| 1.3.6.1.4.1.20044.80.2.3.1.184.1.10 | Columnpm10010ulhAlmLineTxPowerLowAlarmPortn | read-only | current | Line Trscv Tx Power Low Alarm :This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indica… |
| 1.3.6.1.4.1.20044.80.2.3.1.184.1.11 | Columnpm10010ulhAlmLineTxPowerLowWarningPortn | read-only | current | Line Trscv Tx Power Low Warning :This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM <Help> Warning in… |
| 1.3.6.1.4.1.20044.80.2.3.1.184.1.12 | Columnpm10010ulhAlmLineTxPowerHighWarningPortn | read-only | current | Line Trscv Tx Power High Warning :This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM <Help> Warning … |
| 1.3.6.1.4.1.20044.80.2.3.1.184.1.13 | Columnpm10010ulhAlmLineTxPowerHighAlarmPortn | read-only | current | Line Trscv Tx Power High Alarm :This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indi… |
| 1.3.6.1.4.1.20044.80.2.3.1.184.1.14 | Columnpm10010ulhAlmLineBiasLowAlarmPortn | read-only | current | Line Trscv Tx Bias Low Alarm :This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Alarm i… |
| 1.3.6.1.4.1.20044.80.2.3.1.184.1.15 | Columnpm10010ulhAlmLineBiasLowWarningPortn | read-only | current | Line Trscv Tx Bias Low Warning :This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Warni… |
| 1.3.6.1.4.1.20044.80.2.3.1.184.1.16 | Columnpm10010ulhAlmLineBiasHighWarningPortn | read-only | current | Line Trscv Tx Bias High Warning :This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> War… |
| 1.3.6.1.4.1.20044.80.2.3.1.184.1.17 | Columnpm10010ulhAlmLineBiasHighAlarmPortn | read-only | current | Line Trscv Tx Bias High Alarm :This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Alarm… |
| 1.3.6.1.4.1.20044.80.2.3.1.188 | Tablepm10010ulhAlmlineNetworkLaneAlarmWarning2Table | not-accessible | current | List of pm10010ulhAlmlineNetworkLaneAlarmWarning2 Article |
| 1.3.6.1.4.1.20044.80.2.3.1.188.1 | Rowpm10010ulhAlmlineNetworkLaneAlarmWarning2Entry | not-accessible | current | Row definition for the pm10010ulhAlmlineNetworkLaneAlarmWarning2 table |
| 1.3.6.1.4.1.20044.80.2.3.1.188.1.1 | Columnpm10010ulhAlmlineNetworkLaneAlarmWarning2Index | read-only | current | Index definition for the pm10010ulhAlmlineNetworkLaneAlarmWarning2 table |
| 1.3.6.1.4.1.20044.80.2.3.1.188.1.2 | Columnpm10010ulhAlmTxModulatorBiasLowAlarmPortn | read-only | current | Line Trscv Tx Modulator Bias Low Alarm :This OID indicates that the Trscv Tx modulator bias current is lower than the threshold value written in the Trscv EEPR… |
| 1.3.6.1.4.1.20044.80.2.3.1.188.1.3 | Columnpm10010ulhAlmTxModulatorBiasLowWarningPortn | read-only | current | Line Trscv Tx Modulator Bias Low Warning :This OID indicates that the Trscv Tx modulator bias current is lower than the threshold value written in the Trscv EE… |
| 1.3.6.1.4.1.20044.80.2.3.1.188.1.4 | Columnpm10010ulhAlmTxModulatorBiasHighWarningPortn | read-only | current | Line Trscv Tx Modulator Bias High Warning :This OID indicates that the Trscv Tx modulator bias current is higher than the threshold value written in the Trscv … |
| 1.3.6.1.4.1.20044.80.2.3.1.188.1.5 | Columnpm10010ulhAlmTxModulatorBiasHighAlarmPortn | read-only | current | Line Trscv Tx Modulator Bias High Alarm :This OID indicates that the Trscv Tx modulator bias current is higher than the threshold value written in the Trscv EE… |
| 1.3.6.1.4.1.20044.80.2.3.1.188.1.6 | Columnpm10010ulhAlmRxLaserTempLowAlarmPortn | read-only | current | Line Trscv Rx Laser Temp Low Alarm :This OID indicates that the Trscv Rx Laser Temperature is lower than the threshold value written in the Trscv EEPROM <Help>… |
| 1.3.6.1.4.1.20044.80.2.3.1.188.1.7 | Columnpm10010ulhAlmRxLaserTempLowWarningPortn | read-only | current | Line Trscv Rx Laser Temp Low Warning :This OID indicates that the Trscv Rx Laser Temperature is lower than the threshold value written in the Trscv EEPROM <Hel… |
| 1.3.6.1.4.1.20044.80.2.3.1.188.1.8 | Columnpm10010ulhAlmRxLaserTempHighWarningPortn | read-only | current | Line Trscv Rx Laser Temp High Warning :This OID indicates that the Trscv Rx Laser Temperature is higher than the threshold value written in the Trscv EEPROM <H… |
| 1.3.6.1.4.1.20044.80.2.3.1.188.1.9 | Columnpm10010ulhAlmRxLaserTempHighAlarmPortn | read-only | current | Line Trscv Rx Laser Temp High Alarm :This OID indicates that the Trscv Rx Laser Temperature is higher than the threshold value written in the Trscv EEPROM <Hel… |
| 1.3.6.1.4.1.20044.80.2.3.1.188.1.10 | Columnpm10010ulhAlmRxLaserOutputLowAlarmPortn | read-only | current | Line Trscv Rx Output Power Low Alarm :This OID indicates that the Trscv Rx output power is lower than the threshold value written in the Trscv EEPROM <Help> Al… |
| 1.3.6.1.4.1.20044.80.2.3.1.188.1.11 | Columnpm10010ulhAlmRxLaserOutputLowWarningPortn | read-only | current | Line Trscv Rx Output Power Low Warning :This OID indicates that the Trscv Rx output power is lower than the threshold value written in the Trscv EEPROM <Help> … |
| 1.3.6.1.4.1.20044.80.2.3.1.188.1.12 | Columnpm10010ulhAlmRxLaserOutputHighWarningPortn | read-only | current | Line Trscv Rx Output Power High Warning :This OID indicates that the Trscv Rx output power is higher than the threshold value written in the Trscv EEPROM <Help… |
| 1.3.6.1.4.1.20044.80.2.3.1.188.1.13 | Columnpm10010ulhAlmRxLaserOutputHighAlarmPortn | read-only | current | Line Trscv Rx Output Power High Alarm :This OID indicates that the Trscv Rx output power is higher than the threshold value written in the Trscv EEPROM <Help> … |
| 1.3.6.1.4.1.20044.80.2.3.1.188.1.14 | Columnpm10010ulhAlmRxLaserBiasLowAlarmPortn | read-only | current | Line Trscv Rx Bias Low Alarm :This OID indicates that the Trscv Rx laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Alar… |
| 1.3.6.1.4.1.20044.80.2.3.1.188.1.15 | Columnpm10010ulhAlmRxLaserBiasLowWarningPortn | read-only | current | Line Trscv Rx Bias Low Warning :This OID indicates that the Trscv Rx laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Wa… |
| 1.3.6.1.4.1.20044.80.2.3.1.188.1.16 | Columnpm10010ulhAlmRxLaserBiasHighWarningPortn | read-only | current | Line Trscv Rx Bias High Warning :This OID indicates that the Trscv Rx laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> … |
| 1.3.6.1.4.1.20044.80.2.3.1.188.1.17 | Columnpm10010ulhAlmRxLaserBiasHighAlarmPortn | read-only | current | Line Trscv Rx Bias High Alarm :This OID indicates that the Trscv Rx laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Al… |
| 1.3.6.1.4.1.20044.80.2.3.2 | Nodepm10010ulhAlmLineUrg | |||
| 1.3.6.1.4.1.20044.80.2.3.2.192 | Tablepm10010ulhAlmlineNetworkLaneFaultTable | not-accessible | current | List of pm10010ulhAlmlineNetworkLaneFault Article |
| 1.3.6.1.4.1.20044.80.2.3.2.192.1 | Rowpm10010ulhAlmlineNetworkLaneFaultEntry | not-accessible | current | Row definition for the pm10010ulhAlmlineNetworkLaneFault table |
| 1.3.6.1.4.1.20044.80.2.3.2.192.1.1 | Columnpm10010ulhAlmlineNetworkLaneFaultIndex | read-only | current | Index definition for the pm10010ulhAlmlineNetworkLaneFault table |
| 1.3.6.1.4.1.20044.80.2.3.2.192.1.3 | Columnpm10010ulhAlmLineLaneRxTecFaultPortn | read-only | current | Line Network Lane Rx TEC Fault :This OID indicates a Rx TEC Fault on the Line Trscv Network Lane <Help> Alarm indicating a Rx TEC Fault on the Line Trscv Netwo… |
| 1.3.6.1.4.1.20044.80.2.3.2.192.1.4 | Columnpm10010ulhAlmLineLaneRxFifoErrorPortn | read-only | current | Line Network Lane Rx FIFO Error :This OID indicates a Rx FIFO Error on the Line Trscv Network Lane <Help> Alarm indicating a Rx FIFO Error on the Line Trscv Ne… |
| 1.3.6.1.4.1.20044.80.2.3.2.192.1.5 | Columnpm10010ulhAlmLineLaneRxLolPortn | read-only | current | Line Network Lane Rx Loss Of Lock :This OID indicates a Rx Loss of Lock on the Line Trscv Network Lane <Help> Alarm indicating a Rx Loss of Lock on the Line Tr… |
| 1.3.6.1.4.1.20044.80.2.3.2.192.1.6 | Columnpm10010ulhAlmLineLaneRxLosPortn | read-only | current | Line Network Lane Rx Loss Of Signal :This OID indicates a Rx Loss of Signal on the Line Trscv Network Lane <Help> Alarm indicating a Rx Loss of Signal on the L… |
| 1.3.6.1.4.1.20044.80.2.3.2.192.1.8 | Columnpm10010ulhAlmLineLaneTxLolPortn | read-only | current | Line Network Lane Tx Loss Of Lock :This OID indicates a Tx Loss of Lock on the Line Trscv Network Lane <Help> Alarm indicating a Tx Loss of Lock on the Line Tr… |
| 1.3.6.1.4.1.20044.80.2.3.2.192.1.9 | Columnpm10010ulhAlmLineLaneTxLosfPortn | read-only | current | Line Network Lane Tx Loss Of Signal Functionality :This OID indicates a Tx Loss of Signal Functionality on the Line Trscv Network Lane <Help> Alarm indicating … |
| 1.3.6.1.4.1.20044.80.2.3.2.192.1.15 | Columnpm10010ulhAlmLineLaneApdPowerSupplyPortn | read-only | current | Line Network Lane APD Power Supply :This OID indicates an APD Power supply failure on the Line Trscv Network Lane <Help> Alarm indicating an APD Power supply f… |
| 1.3.6.1.4.1.20044.80.2.3.2.192.1.16 | Columnpm10010ulhAlmLineLaneWavelengthUnlockedPortn | read-only | current | Line Network Lane Wavelength Unlock :This OID indicates a Wavelength unlock on the Line Trscv Network Lane <Help> Alarm indicating a Wavelength unlock on the L… |
| 1.3.6.1.4.1.20044.80.2.3.2.192.1.17 | Columnpm10010ulhAlmLineLaneTecFaultPortn | read-only | current | Line Network Lane TEC Fault :This OID indicates a Tx TEC Fault on the Line Trscv Network Lane <Help> Alarm indicating a Tx TEC Fault on the Line Trscv Network … |
| 1.3.6.1.4.1.20044.80.2.3.2.196 | Tablepm10010ulhAlmlineHostLaneFaultTable | not-accessible | current | List of pm10010ulhAlmlineHostLaneFault Article |
| 1.3.6.1.4.1.20044.80.2.3.2.196.1 | Rowpm10010ulhAlmlineHostLaneFaultEntry | not-accessible | current | Row definition for the pm10010ulhAlmlineHostLaneFault table |
| 1.3.6.1.4.1.20044.80.2.3.2.196.1.1 | Columnpm10010ulhAlmlineHostLaneFaultIndex | read-only | current | Index definition for the pm10010ulhAlmlineHostLaneFault table |
| 1.3.6.1.4.1.20044.80.2.3.2.196.1.2 | Columnpm10010ulhAlmLineInputLossOfSignalPortn | read-only | current | Line Input Loss Of Signal :This OID indicates a Loss of Signal is detected on the Line Trscv <Help> Alarm indicating a Loss of Signal is detected on the Line T… |
| 1.3.6.1.4.1.20044.80.2.3.2.196.1.3 | Columnpm10010ulhAlmLineLossOfFramePortn | read-only | current | Line Loss Of Frame :This OID indicates the module is not aligned with the incoming Line signal <Help> Alarm indicating the module is not aligned with the incom… |
| 1.3.6.1.4.1.20044.80.2.3.2.196.1.4 | Columnpm10010ulhAlmLineSmBdiInsertedPortn | read-only | current | Line SM BDI Inserted :This OID indicates a SM Backward Defect Indication is inserted on the outgoing Line signal <Help> Status indicating a SM Backward Defect … |
| 1.3.6.1.4.1.20044.80.2.3.2.196.1.5 | Columnpm10010ulhAlmLineSmBdiDetectedPortn | read-only | current | Line SM BDI Detected :This OID indicates a SM Backward Defect Indication is detected on the incoming Line signal <Help> Alarm indicating a SM Backward Defect I… |
| 1.3.6.1.4.1.20044.80.2.3.2.196.1.6 | Columnpm10010ulhAlmLineSmIaeInsertedPortn | read-only | current | Line SM IAE Inserted :This OID indicates a SM Incoming Alignment Error is inserted on the outgoing Line signal <Help> Status indicating a SM Incoming Alignment… |
| 1.3.6.1.4.1.20044.80.2.3.2.196.1.7 | Columnpm10010ulhAlmLineSmIaeDetectedPortn | read-only | current | Line SM IAE Detected :This OID indicates a SM Incoming Alignment Error is detected on the incoming Line signal <Help> Alarm indicating a SM Incoming Alignment … |
| 1.3.6.1.4.1.20044.80.2.3.2.196.1.10 | Columnpm10010ulhAlmLineTxHostLolPortn | read-only | current | Line Host Lane Tx Loss Of Lock :This OID indicates a Tx Loss of Lock on the Line Trscv Host Lane <Help> Alarm indicating a Tx Loss of Lock on the Line Trscv Ho… |
| 1.3.6.1.4.1.20044.80.2.3.2.196.1.11 | Columnpm10010ulhAlmLineLaneTxFifoErrorPortn | read-only | current | Line Host Lane Tx FIFO Error :This OID indicates a Tx FIFO Error on the Line Trscv Host Lane <Help> Alarm indicating a Tx FIFO Error on the Line Trscv Host Lan… |
| 1.3.6.1.4.1.20044.80.2.3.2.200 | Tablepm10010ulhAlmlineNetworkLaneRxOtnTable | not-accessible | current | List of pm10010ulhAlmlineNetworkLaneRxOtn Article |
| 1.3.6.1.4.1.20044.80.2.3.2.200.1 | Rowpm10010ulhAlmlineNetworkLaneRxOtnEntry | not-accessible | current | Row definition for the pm10010ulhAlmlineNetworkLaneRxOtn table |
| 1.3.6.1.4.1.20044.80.2.3.2.200.1.1 | Columnpm10010ulhAlmlineNetworkLaneRxOtnIndex | read-only | current | Index definition for the pm10010ulhAlmlineNetworkLaneRxOtn table |
| 1.3.6.1.4.1.20044.80.2.3.2.200.1.10 | Columnpm10010ulhAlmLineRxOtnOduAisPortn | read-only | current | Line Network Rx ODU AIS :This OID indicates an ODU This OID Indication Signal is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating… |
| 1.3.6.1.4.1.20044.80.2.3.2.200.1.11 | Columnpm10010ulhAlmLineRxOtnOtuAisPortn | read-only | current | Line Network Rx OTU AIS :This OID indicates an OTU This OID Indication Signal is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating… |
| 1.3.6.1.4.1.20044.80.2.3.2.200.1.12 | Columnpm10010ulhAlmLineRxSmBdiPortn | read-only | current | Line Network Rx SM BDI :This OID indicates an SM Backward Defect Indication is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating a… |
| 1.3.6.1.4.1.20044.80.2.3.2.200.1.13 | Columnpm10010ulhAlmLineRxOtnIaePortn | read-only | current | Line Network Rx IAE :This OID indicates an Incoming Alignment Error is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating an Incomi… |
| 1.3.6.1.4.1.20044.80.2.3.2.200.1.14 | Columnpm10010ulhAlmLineRxOtnOomPortn | read-only | current | Line Network Rx OOM :This OID indicates an Out of Multiframe is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating an Out of Multif… |
| 1.3.6.1.4.1.20044.80.2.3.2.200.1.15 | Columnpm10010ulhAlmLineRxOtnLomPortn | read-only | current | Line Network Rx LOM :This OID indicates a Loss of Multiframe is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating a Loss of Multif… |
| 1.3.6.1.4.1.20044.80.2.3.2.200.1.16 | Columnpm10010ulhAlmLineRxOtnOofPortn | read-only | current | Line Network Rx OOF :This OID indicates an Out of Frame is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating an Out of Frame is de… |
| 1.3.6.1.4.1.20044.80.2.3.2.200.1.17 | Columnpm10010ulhAlmLineRxOtnLofPortn | read-only | current | Line Network Rx LOF :This OID indicates a Loss of Frame is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating a Loss of Frame is de… |
| 1.3.6.1.4.1.20044.80.2.3.2.204 | Tablepm10010ulhAlmlineHostLaneTxOtnTable | not-accessible | current | List of pm10010ulhAlmlineHostLaneTxOtn Article |
| 1.3.6.1.4.1.20044.80.2.3.2.204.1 | Rowpm10010ulhAlmlineHostLaneTxOtnEntry | not-accessible | current | Row definition for the pm10010ulhAlmlineHostLaneTxOtn table |
| 1.3.6.1.4.1.20044.80.2.3.2.204.1.1 | Columnpm10010ulhAlmlineHostLaneTxOtnIndex | read-only | current | Index definition for the pm10010ulhAlmlineHostLaneTxOtn table |
| 1.3.6.1.4.1.20044.80.2.3.2.204.1.10 | Columnpm10010ulhAlmLineTxOtnOduAisPortn | read-only | current | Line Host Tx ODU AIS :This OID indicates an ODU This OID Indication Signal is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating an OD… |
| 1.3.6.1.4.1.20044.80.2.3.2.204.1.11 | Columnpm10010ulhAlmLineTxOtnOtuAisPortn | read-only | current | Line Host Tx OTU AIS :This OID indicates an OTU This OID Indication Signal is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating an OT… |
| 1.3.6.1.4.1.20044.80.2.3.2.204.1.12 | Columnpm10010ulhAlmLineTxSmBdiPortn | read-only | current | Line Host Tx SM BDI :This OID indicates an SM Backward Defect Indication is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating an SM B… |
| 1.3.6.1.4.1.20044.80.2.3.2.204.1.13 | Columnpm10010ulhAlmLineTxOtnIaePortn | read-only | current | Line Host Tx IAE :This OID indicates an Incoming Alignment Error is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating an Incoming Ali… |
| 1.3.6.1.4.1.20044.80.2.3.2.204.1.14 | Columnpm10010ulhAlmLineTxOtnOomPortn | read-only | current | Line Host Tx OOM :This OID indicates an Out of Multiframe is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating an Out of Multiframe i… |
| 1.3.6.1.4.1.20044.80.2.3.2.204.1.15 | Columnpm10010ulhAlmLineTxOtnLomPortn | read-only | current | Line Host Tx LOM :This OID indicates a Loss of Multiframe is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating a Loss of Multiframe i… |
| 1.3.6.1.4.1.20044.80.2.3.2.204.1.16 | Columnpm10010ulhAlmLineTxOtnOofPortn | read-only | current | Line Host Tx OOF :This OID indicates an Out of Frame is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating an Out of Frame is detected… |
| 1.3.6.1.4.1.20044.80.2.3.2.204.1.17 | Columnpm10010ulhAlmLineTxOtnLofPortn | read-only | current | Line Host Tx LOF :This OID indicates a Loss of Frame is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating a Loss of Frame is detected… |
| 1.3.6.1.4.1.20044.80.2.3.3 | Nodepm10010ulhAlmLineCrit | |||
| 1.3.6.1.4.1.20044.80.2.3.3.40 | Tablepm10010ulhAlmsynthAlmLineTable | not-accessible | current | List of pm10010ulhAlmsynthAlmLine Article |
| 1.3.6.1.4.1.20044.80.2.3.3.40.1 | Rowpm10010ulhAlmsynthAlmLineEntry | not-accessible | current | Row definition for the pm10010ulhAlmsynthAlmLine table |
| 1.3.6.1.4.1.20044.80.2.3.3.40.1.1 | Columnpm10010ulhAlmsynthAlmLineIndex | read-only | current | Index definition for the pm10010ulhAlmsynthAlmLine table |
| 1.3.6.1.4.1.20044.80.2.3.3.40.1.2 | Columnpm10010ulhAlmXfpAbsentPortn | read-only | current | Line Optical Module Absent :This OID indicates that the line optical interface is not present. <Help> This alarm indicates if the line transceiver is not plugg… |
| 1.3.6.1.4.1.20044.80.2.3.3.40.1.3 | Columnpm10010ulhAlmXfpInitNotComplPortn | read-only | current | Line Optical Module Ready :This OID indicates that the optical interface is not operational. <Help> This status indicates if the line transceiver has been corr… |
| 1.3.6.1.4.1.20044.80.2.3.3.40.1.5 | Columnpm10010ulhAlmLineHwFailPortn | read-only | current | Line Port HW Failure :This OID indicates a failure on line port, most probably caused by a HW issue <Help> This alarm indicates a failure on line port, most pr… |
| 1.3.6.1.4.1.20044.80.2.3.3.40.1.6 | Columnpm10010ulhAlmXfpTxOffPortn | read-only | current | Line Trscv Laser Shutdown :This OID indicates the Line transceiver laser is shutdown <Help> This status indicates if the Line transceiver laser is shutdown <Co… |
| 1.3.6.1.4.1.20044.80.2.3.3.40.1.7 | Columnpm10010ulhAlmLineLocalOosPortn | read-only | current | Line Port In Service :This OID indicates that the Line port is In Service (1) of Out or Service (2) <Help> This status indicates if the line port is in service… |
| 1.3.6.1.4.1.20044.80.2.3.3.40.1.9 | Columnpm10010ulhAlmUpRdiInsPortn | read-only | current | MS-RDI/L-RDI Inserted On Line :This OID indicates an upstream MS-RDI/L-RDI has been inserted in the outgoing 10 Gb/s SDH/SONET signal. <Help> This status indic… |
| 1.3.6.1.4.1.20044.80.2.3.3.40.1.10 | Columnpm10010ulhAlmLineDdmWarningPortn | read-only | current | Warning On Line Optical Module DDM :This OID indicates a warning is present coming out of Line transceiver DDM <Help> This alarm indicates if a DDM Warning has… |
| 1.3.6.1.4.1.20044.80.2.3.3.40.1.11 | Columnpm10010ulhAlmLineDdmAlmPortn | read-only | current | Alarm On Line Optical Module DDM :This OID indicates an alarm is present coming out of Line transceiver DDM <Help> This alarm indicates if a DDM Alarm has been… |
| 1.3.6.1.4.1.20044.80.2.3.3.40.1.13 | Columnpm10010ulhAlmLineFailPortn | read-only | current | Line Port Failure :This OID indicates a failure on the line port <Help> This alarm indicates a failure on the line port <Condtype> LINE_FAIL <Probcause> equipm… |
| 1.3.6.1.4.1.20044.80.2.3.3.40.1.17 | Columnpm10010ulhAlmLineActivePortn | read-only | current | Line Active :This OID indicates whether the line is active or standby. <Help> This status indicates whether the line is active or standby. <Condtype> LINE_ACTI… |
| 1.3.6.1.4.1.20044.80.3 | Nodepm10010ulhmeasures | |||
| 1.3.6.1.4.1.20044.80.3.1 | Nodepm10010ulhMesrOther | |||
| 1.3.6.1.4.1.20044.80.3.1.0 | Scalarpm10010ulhMesrsynth0 | read-only | deprecated | Not Used : |
| 1.3.6.1.4.1.20044.80.3.1.1 | Scalarpm10010ulhMesrsynth1 | read-only | deprecated | Not Used : |
| 1.3.6.1.4.1.20044.80.3.1.7 | Scalarpm10010ulhMesrpmIntervalNumber | read-only | current | PM Interval Counter : |
| 1.3.6.1.4.1.20044.80.3.1.196 | Scalarpm10010ulhMesrlineNetTxLaserOutputPwrAverage | read-only | current | Average Line Trscv Tx Power :This OID gives the average Tx Laser transmit power value among the network lanes of the Line Transceiver, read in the DDM (Digital… |
| 1.3.6.1.4.1.20044.80.3.1.197 | Scalarpm10010ulhMesrlineNetTxLaserTempAverage | read-only | current | Average Line Trscv Tx Laser Temperature :This OID gives the average Tx Laser Temperature value among the network lanes of the Line Transceiver, read from the D… |
| 1.3.6.1.4.1.20044.80.3.1.198 | Scalarpm10010ulhMesrlineNetTxBiasCurrentAverage | read-only | current | Average Line Trscv Tx Laser Bias :This OID gives the average Tx Laser Bias value among the network lanes of the Line Transceiver, read from the DDM (Digital Di… |
| 1.3.6.1.4.1.20044.80.3.1.199 | Scalarpm10010ulhMesrlineNetRxInputPwrAverage | read-only | current | Average Line Trscv Rx Power :This OID gives the average Receive power value among the network lanes of the Line Transceiver, read in the DDM (Digital Diagnosti… |
| 1.3.6.1.4.1.20044.80.3.1.200 | Scalarpm10010ulhMesrlineResidualChromaticDispAverage | read-only | current | Average Residual Chromatic Dispersion :This OID gives the average Residual Chromatic Dispersion on the Line interface since the last measure reset (Dispersion … |
| 1.3.6.1.4.1.20044.80.3.1.201 | Scalarpm10010ulhMesrlineDiffGroupDelayAverage | read-only | current | Average Differential Group Delay :This OID gives the average Group Delay on the Line interface since the last measure reset (Delay = AV_S16) (Unit = ps)<Help> … |
| 1.3.6.1.4.1.20044.80.3.1.202 | Scalarpm10010ulhMesrlineQFactorAverage | read-only | current | Average Q Factor :This OID gives the average Q Factor on the Line interface since the last measure reset (Q Factor = AV_U16) (Unit = dB) <Help> This measure gi… |
| 1.3.6.1.4.1.20044.80.3.1.203 | Scalarpm10010ulhMesrlineCarrierFreqOffsetAverage | read-only | current | Average Carrier Frequency Offset :This OID gives the average Carrier Frequency Offset on the Line interface since the last measure reset (Offset = AV_S16) (Uni… |
| 1.3.6.1.4.1.20044.80.3.1.204 | Scalarpm10010ulhMesrlineOsnrAverage | read-only | current | Average OSNR :This OID gives the average OSNR on the Line interface since the last measure reset (OSNR = AV_S16/10) (Unit = dB)<Help> This measure gives the av… |
| 1.3.6.1.4.1.20044.80.3.1.208 | Scalarpm10010ulhMesrclientNetTxTempMin | read-only | current | Min Client Trscv Laser Temperature :This OID gives the minimum Laser temperature value among the network lanes of the Client Transceiver, read from the DDM (Di… |
| 1.3.6.1.4.1.20044.80.3.1.209 | Scalarpm10010ulhMesrclientNetTxBiasMin | read-only | current | Min Client Trscv Laser Bias :This OID gives the minimum Laser bias value among the network lanes of the Client Transceiver, read from the DDM (Digital Diagnost… |
| 1.3.6.1.4.1.20044.80.3.1.210 | Scalarpm10010ulhMesrclientNetTxPwrMin | read-only | current | Min Client Trscv Tx Power :This OID gives the minimum transmit power value among the network lanes of the Client Transceiver, read from the DDM (Digital Diagno… |
| 1.3.6.1.4.1.20044.80.3.1.211 | Scalarpm10010ulhMesrclientNetRxPwrMin | read-only | current | Min Client Trscv Rx Power :This OID gives the minimum receive power value among the network lanes of the Client Transceiver, read in the DDM (Digital Diagnosti… |
| 1.3.6.1.4.1.20044.80.3.1.212 | Scalarpm10010ulhMesrlineNetTxLaserOutputPwrMin | read-only | current | Min Line Trscv Tx Power :This OID gives the minimum Tx Laser transmit power value among the network lanes of the Line Transceiver, read in the DDM (Digital Dia… |
| 1.3.6.1.4.1.20044.80.3.1.213 | Scalarpm10010ulhMesrlineNetTxLaserTempMin | read-only | current | Min Line Trscv Tx Laser Temperature :This OID gives the minimum Tx Laser Temperature value among the network lanes of the Line Transceiver, read from the DDM (… |
| 1.3.6.1.4.1.20044.80.3.1.214 | Scalarpm10010ulhMesrlineNetTxBiasCurrentMin | read-only | current | Min Line Trscv Tx Laser Bias :This OID gives the minimum Tx Laser Bias value among the network lanes of the Line Transceiver, read from the DDM (Digital Diagno… |
| 1.3.6.1.4.1.20044.80.3.1.215 | Scalarpm10010ulhMesrlineNetRxInputPwrMin | read-only | current | Min Line Trscv Rx Power :This OID gives the minimum Receive power value among the network lanes of the Line Transceiver, read in the DDM (Digital Diagnostic Mo… |
| 1.3.6.1.4.1.20044.80.3.1.216 | Scalarpm10010ulhMesrlineResidualChromaticDispMin | read-only | current | Min Residual Chromatic Dispersion :This OID gives the minimum Residual Chromatic Dispersion on the Line interface since the last measure reset (Dispersion = AV… |
| 1.3.6.1.4.1.20044.80.3.1.217 | Scalarpm10010ulhMesrlineDiffGroupDelayMin | read-only | current | Min Differential Group Delay :This OID gives the minimum Differential Group Delay on the Line interface since the last measure reset (Delay = AV_S16) (Unit = p… |
| 1.3.6.1.4.1.20044.80.3.1.218 | Scalarpm10010ulhMesrlineQFactorMin | read-only | current | Min Q Factor :This OID gives the minimum Q Factor on the Line interface since the last measure reset (Q Factor = AV_U16) (Unit = dB)<Help> This measure gives t… |
| 1.3.6.1.4.1.20044.80.3.1.219 | Scalarpm10010ulhMesrlineCarrierFreqOffsetMin | read-only | current | Min Carrier Frequency Offset :This OID gives the minimum Carrier Frequency Offset on the Line interface since the last measure reset (Offset = AV_S16) (Unit = … |
| 1.3.6.1.4.1.20044.80.3.1.220 | Scalarpm10010ulhMesrlineOsnrMin | read-only | current | Min OSNR :This OID gives the minimum OSNR on the Line interface since the last measure reset (OSNR = AV_S16/10) (Unit = dB)<Help> This measure gives the minimu… |
| 1.3.6.1.4.1.20044.80.3.1.224 | Scalarpm10010ulhMesrclientNetTxTempMax | read-only | current | Max Client Trscv Laser Temperature :This OID gives the maximum Laser temperature value among the network lanes of the Client Transceiver, read from the DDM (Di… |
| 1.3.6.1.4.1.20044.80.3.1.225 | Scalarpm10010ulhMesrclientNetTxBiasMax | read-only | current | Max Client Trscv Laser Bias :This OID gives the maximum Laser bias value among the network lanes of the Client Transceiver, read from the DDM (Digital Diagnost… |
| 1.3.6.1.4.1.20044.80.3.1.226 | Scalarpm10010ulhMesrclientNetTxPwrMax | read-only | current | Max Client Trscv Tx Power :This OID gives the maximum transmit power value among the network lanes of the Client Transceiver, read from the DDM (Digital Diagno… |
| 1.3.6.1.4.1.20044.80.3.1.227 | Scalarpm10010ulhMesrclientNetRxPwrMax | read-only | current | Max Client Trscv Rx Power :This OID gives the maximum receive power value among the network lanes of the Client Transceiver, read in the DDM (Digital Diagnosti… |
| 1.3.6.1.4.1.20044.80.3.1.228 | Scalarpm10010ulhMesrlineNetTxLaserOutputPwrMax | read-only | current | Max Line Trscv Tx Power :This OID gives the maximum Tx Laser transmit power value among the network lanes of the Line Transceiver, read in the DDM (Digital Dia… |
| 1.3.6.1.4.1.20044.80.3.1.229 | Scalarpm10010ulhMesrlineNetTxLaserTempMax | read-only | current | Max Line Trscv Tx Laser Temperature :This OID gives the maximum Tx Laser Temperature value among the network lanes of the Line Transceiver, read from the DDM (… |
| 1.3.6.1.4.1.20044.80.3.1.230 | Scalarpm10010ulhMesrlineNetTxBiasCurrentMax | read-only | current | Max Line Trscv Tx Laser Bias :This OID gives the maximum Tx Laser Bias value among the network lanes of the Line Transceiver, read from the DDM (Digital Diagno… |
| 1.3.6.1.4.1.20044.80.3.1.231 | Scalarpm10010ulhMesrlineNetRxInputPwrMax | read-only | current | Max Line Trscv Rx Power :This OID gives the maximum Receive power value among the network lanes of the Line Transceiver, read in the DDM (Digital Diagnostic Mo… |
| 1.3.6.1.4.1.20044.80.3.1.232 | Scalarpm10010ulhMesrlineResidualChromaticDispMax | read-only | current | Max Residual Chromatic Dispersion :This OID gives the maximum Residual Chromatic Dispersion on the Line interface since the last measure reset (Dispersion = AV… |
| 1.3.6.1.4.1.20044.80.3.1.233 | Scalarpm10010ulhMesrlineDiffGroupDelayMax | read-only | current | Max Differential Group Delay :This OID gives the maximum Differential Group Delay on the Line interface since the last measure reset (Delay = AV_S16) (Unit = p… |
| 1.3.6.1.4.1.20044.80.3.1.234 | Scalarpm10010ulhMesrlineQFactorMax | read-only | current | Max Q Factor :This OID gives the maximum Q Factor on the Line interface since the last measure reset (Q Factor = AV_U16) (Unit = dB)<Help> This measure gives t… |
| 1.3.6.1.4.1.20044.80.3.1.235 | Scalarpm10010ulhMesrlineCarrierFreqOffsetMax | read-only | current | Max Carrier Frequency Offset :This OID gives the maximum Carrier Frequency Offset on the Line interface since the last measure reset (Offset = AV_S16) (Unit = … |
| 1.3.6.1.4.1.20044.80.3.1.236 | Scalarpm10010ulhMesrlineOsnrMax | read-only | current | Max OSNR :This OID gives the maximum OSNR on the Line interface since the last measure reset (OSNR = AV_S16/10) (Unit = dB)<Help> This measure gives the maximu… |
| 1.3.6.1.4.1.20044.80.3.2 | Nodepm10010ulhMesrClient | |||
| 1.3.6.1.4.1.20044.80.3.2.8 | Scalarpm10010ulhMesrclientCfpTemp | read-only | current | Client Trscv Temperature :This OID gives the temperature value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV_S… |
| 1.3.6.1.4.1.20044.80.3.2.9 | Scalarpm10010ulhMesrclientCfp3v3Voltage | read-only | current | Client Trscv Voltage :This OID gives the 3V3 voltage value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Voltage = AV_U16/10000… |
| 1.3.6.1.4.1.20044.80.3.2.10 | Scalarpm10010ulhMesrclientSoaBiasCurrent | read-only | current | Client Trscv SOA Bias :This OID gives the SOA bias value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV_U16/500) (Unit… |
| 1.3.6.1.4.1.20044.80.3.2.16 | Tablepm10010ulhMesrclientNetTxTempTable | not-accessible | current | List of pm10010ulhMesrclientNetTxTemp Article |
| 1.3.6.1.4.1.20044.80.3.2.16.1 | Rowpm10010ulhMesrclientNetTxTempEntry | not-accessible | current | Row definition for the pm10010ulhMesrclientNetTxTemp table |
| 1.3.6.1.4.1.20044.80.3.2.16.1.1 | Columnpm10010ulhMesrclientNetTxTempIndex | read-only | current | Index definition for the pm10010ulhMesrclientNetTxTemp table |
| 1.3.6.1.4.1.20044.80.3.2.16.1.2 | Columnpm10010ulhMesrclientNetTxTempPortn | read-only | current | Client Trscv Temperature :This OID gives the Laser temperature value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature … |
| 1.3.6.1.4.1.20044.80.3.2.48 | Tablepm10010ulhMesrclientNetTxBiasTable | not-accessible | current | List of pm10010ulhMesrclientNetTxBias Article |
| 1.3.6.1.4.1.20044.80.3.2.48.1 | Rowpm10010ulhMesrclientNetTxBiasEntry | not-accessible | current | Row definition for the pm10010ulhMesrclientNetTxBias table |
| 1.3.6.1.4.1.20044.80.3.2.48.1.1 | Columnpm10010ulhMesrclientNetTxBiasIndex | read-only | current | Index definition for the pm10010ulhMesrclientNetTxBias table |
| 1.3.6.1.4.1.20044.80.3.2.48.1.2 | Columnpm10010ulhMesrclientNetTxBiasPortn | read-only | current | Client Trscv Laser Bias :This OID gives the Laser bias value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV_U16/500) (… |
| 1.3.6.1.4.1.20044.80.3.2.80 | Tablepm10010ulhMesrclientNetTxPwrTable | not-accessible | current | List of pm10010ulhMesrclientNetTxPwr Article |
| 1.3.6.1.4.1.20044.80.3.2.80.1 | Rowpm10010ulhMesrclientNetTxPwrEntry | not-accessible | current | Row definition for the pm10010ulhMesrclientNetTxPwr table |
| 1.3.6.1.4.1.20044.80.3.2.80.1.1 | Columnpm10010ulhMesrclientNetTxPwrIndex | read-only | current | Index definition for the pm10010ulhMesrclientNetTxPwr table |
| 1.3.6.1.4.1.20044.80.3.2.80.1.2 | Columnpm10010ulhMesrclientNetTxPwrPortn | read-only | current | Client Trscv Tx Power :This OID gives the transmit power value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV_… |
| 1.3.6.1.4.1.20044.80.3.2.112 | Tablepm10010ulhMesrclientNetRxPwrTable | not-accessible | current | List of pm10010ulhMesrclientNetRxPwr Article |
| 1.3.6.1.4.1.20044.80.3.2.112.1 | Rowpm10010ulhMesrclientNetRxPwrEntry | not-accessible | current | Row definition for the pm10010ulhMesrclientNetRxPwr table |
| 1.3.6.1.4.1.20044.80.3.2.112.1.1 | Columnpm10010ulhMesrclientNetRxPwrIndex | read-only | current | Index definition for the pm10010ulhMesrclientNetRxPwr table |
| 1.3.6.1.4.1.20044.80.3.2.112.1.2 | Columnpm10010ulhMesrclientNetRxPwrPortn | read-only | current | Client Trscv Rx Power :This OID gives the receive power value of the Client Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV_U16… |
| 1.3.6.1.4.1.20044.80.3.3 | Nodepm10010ulhMesrLine | |||
| 1.3.6.1.4.1.20044.80.3.3.12 | Scalarpm10010ulhMesrlineMsaTemp | read-only | current | Line Trscv Temperature :This OID gives the temperature value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV_S16/2… |
| 1.3.6.1.4.1.20044.80.3.3.13 | Scalarpm10010ulhMesrlineMsa3v3Voltage | read-only | current | Line Trscv Voltage :This OID gives the 3V3 voltage value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Voltage = AV_U16/10000) (U… |
| 1.3.6.1.4.1.20044.80.3.3.14 | Scalarpm10010ulhMesrlineSoaBiasCurrent | read-only | current | Line Trscv SOA Bias :This OID gives the SOA bias value of the Line Transceiver,read from the DDM (Digital Diagnostic Monitoring) (Bias = AV_U16/500) (Unit = mA… |
| 1.3.6.1.4.1.20044.80.3.3.144 | Tablepm10010ulhMesrlineNetTxLaserOutputPwrTable | not-accessible | current | List of pm10010ulhMesrlineNetTxLaserOutputPwr Article |
| 1.3.6.1.4.1.20044.80.3.3.144.1 | Rowpm10010ulhMesrlineNetTxLaserOutputPwrEntry | not-accessible | current | Row definition for the pm10010ulhMesrlineNetTxLaserOutputPwr table |
| 1.3.6.1.4.1.20044.80.3.3.144.1.1 | Columnpm10010ulhMesrlineNetTxLaserOutputPwrIndex | read-only | current | Index definition for the pm10010ulhMesrlineNetTxLaserOutputPwr table |
| 1.3.6.1.4.1.20044.80.3.3.144.1.2 | Columnpm10010ulhMesrlineNetTxLaserOutputPwrPortn | read-only | current | Current Line Trscv Tx Power :This OID gives the Tx Laser transmit power value of the Line Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power =… |
| 1.3.6.1.4.1.20044.80.3.3.148 | Tablepm10010ulhMesrlineNetTxLaserTempTable | not-accessible | current | List of pm10010ulhMesrlineNetTxLaserTemp Article |
| 1.3.6.1.4.1.20044.80.3.3.148.1 | Rowpm10010ulhMesrlineNetTxLaserTempEntry | not-accessible | current | Row definition for the pm10010ulhMesrlineNetTxLaserTemp table |
| 1.3.6.1.4.1.20044.80.3.3.148.1.1 | Columnpm10010ulhMesrlineNetTxLaserTempIndex | read-only | current | Index definition for the pm10010ulhMesrlineNetTxLaserTemp table |
| 1.3.6.1.4.1.20044.80.3.3.148.1.2 | Columnpm10010ulhMesrlineNetTxLaserTempPortn | read-only | current | Current Line Trscv Tx Laser Temperature :This OID gives the Tx Laser Temperature value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitorin… |
| 1.3.6.1.4.1.20044.80.3.3.152 | Tablepm10010ulhMesrlineNetTxBiasCurrentTable | not-accessible | current | List of pm10010ulhMesrlineNetTxBiasCurrent Article |
| 1.3.6.1.4.1.20044.80.3.3.152.1 | Rowpm10010ulhMesrlineNetTxBiasCurrentEntry | not-accessible | current | Row definition for the pm10010ulhMesrlineNetTxBiasCurrent table |
| 1.3.6.1.4.1.20044.80.3.3.152.1.1 | Columnpm10010ulhMesrlineNetTxBiasCurrentIndex | read-only | current | Index definition for the pm10010ulhMesrlineNetTxBiasCurrent table |
| 1.3.6.1.4.1.20044.80.3.3.152.1.2 | Columnpm10010ulhMesrlineNetTxBiasCurrentPortn | read-only | current | Current Line Trscv Tx Laser Bias :This OID gives the Tx Laser Bias value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV_… |
| 1.3.6.1.4.1.20044.80.3.3.156 | Tablepm10010ulhMesrlineNetRxInputPwrTable | not-accessible | current | List of pm10010ulhMesrlineNetRxInputPwr Article |
| 1.3.6.1.4.1.20044.80.3.3.156.1 | Rowpm10010ulhMesrlineNetRxInputPwrEntry | not-accessible | current | Row definition for the pm10010ulhMesrlineNetRxInputPwr table |
| 1.3.6.1.4.1.20044.80.3.3.156.1.1 | Columnpm10010ulhMesrlineNetRxInputPwrIndex | read-only | current | Index definition for the pm10010ulhMesrlineNetRxInputPwr table |
| 1.3.6.1.4.1.20044.80.3.3.156.1.2 | Columnpm10010ulhMesrlineNetRxInputPwrPortn | read-only | current | Current Line Trscv Rx Power :This OID gives the Receive power value of the Line Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power = AV_S16/10… |
| 1.3.6.1.4.1.20044.80.3.3.160 | Tablepm10010ulhMesrlineResidualChromaticDispTable | not-accessible | current | List of pm10010ulhMesrlineResidualChromaticDisp Article |
| 1.3.6.1.4.1.20044.80.3.3.160.1 | Rowpm10010ulhMesrlineResidualChromaticDispEntry | not-accessible | current | Row definition for the pm10010ulhMesrlineResidualChromaticDisp table |
| 1.3.6.1.4.1.20044.80.3.3.160.1.1 | Columnpm10010ulhMesrlineResidualChromaticDispIndex | read-only | current | Index definition for the pm10010ulhMesrlineResidualChromaticDisp table |
| 1.3.6.1.4.1.20044.80.3.3.160.1.2 | Columnpm10010ulhMesrlineResidualChromaticDispPortn | read-only | current | Current Residual Chromatic Dispersion :This OID gives the current Residual Chromatic Dispersion on the Line interface (Dispersion = AV_S16*(-2)) (Unit = ps/nm)… |
| 1.3.6.1.4.1.20044.80.3.3.164 | Tablepm10010ulhMesrlineDiffGroupDelayTable | not-accessible | current | List of pm10010ulhMesrlineDiffGroupDelay Article |
| 1.3.6.1.4.1.20044.80.3.3.164.1 | Rowpm10010ulhMesrlineDiffGroupDelayEntry | not-accessible | current | Row definition for the pm10010ulhMesrlineDiffGroupDelay table |
| 1.3.6.1.4.1.20044.80.3.3.164.1.1 | Columnpm10010ulhMesrlineDiffGroupDelayIndex | read-only | current | Index definition for the pm10010ulhMesrlineDiffGroupDelay table |
| 1.3.6.1.4.1.20044.80.3.3.164.1.2 | Columnpm10010ulhMesrlineDiffGroupDelayPortn | read-only | current | Current Differential Group Delay :This OID gives the current Differential Group Delay on the Line interface (Delay = AV_S16) (Unit = ps)<Help> This measure giv… |
| 1.3.6.1.4.1.20044.80.3.3.168 | Tablepm10010ulhMesrlineQFactorTable | not-accessible | current | List of pm10010ulhMesrlineQFactor Article |
| 1.3.6.1.4.1.20044.80.3.3.168.1 | Rowpm10010ulhMesrlineQFactorEntry | not-accessible | current | Row definition for the pm10010ulhMesrlineQFactor table |
| 1.3.6.1.4.1.20044.80.3.3.168.1.1 | Columnpm10010ulhMesrlineQFactorIndex | read-only | current | Index definition for the pm10010ulhMesrlineQFactor table |
| 1.3.6.1.4.1.20044.80.3.3.168.1.2 | Columnpm10010ulhMesrlineQFactorPortn | read-only | current | Current Q Factor :This OID gives the current Q Factor on the Line interface (Q Factor = AV_U16) (Unit = dB) <Help> This measure gives the current Q Factor on t… |
| 1.3.6.1.4.1.20044.80.3.3.172 | Tablepm10010ulhMesrlineCarrierFreqOffsetTable | not-accessible | current | List of pm10010ulhMesrlineCarrierFreqOffset Article |
| 1.3.6.1.4.1.20044.80.3.3.172.1 | Rowpm10010ulhMesrlineCarrierFreqOffsetEntry | not-accessible | current | Row definition for the pm10010ulhMesrlineCarrierFreqOffset table |
| 1.3.6.1.4.1.20044.80.3.3.172.1.1 | Columnpm10010ulhMesrlineCarrierFreqOffsetIndex | read-only | current | Index definition for the pm10010ulhMesrlineCarrierFreqOffset table |
| 1.3.6.1.4.1.20044.80.3.3.172.1.2 | Columnpm10010ulhMesrlineCarrierFreqOffsetPortn | read-only | current | Current Carrier Frequency Offset :This OID gives the current Carrier Frequency Offset on the Line interface (Offset = AV_S16) (Unit = MHz)<Help> This measure g… |
| 1.3.6.1.4.1.20044.80.3.3.176 | Tablepm10010ulhMesrlineOsnrTable | not-accessible | current | List of pm10010ulhMesrlineOsnr Article |
| 1.3.6.1.4.1.20044.80.3.3.176.1 | Rowpm10010ulhMesrlineOsnrEntry | not-accessible | current | Row definition for the pm10010ulhMesrlineOsnr table |
| 1.3.6.1.4.1.20044.80.3.3.176.1.1 | Columnpm10010ulhMesrlineOsnrIndex | read-only | current | Index definition for the pm10010ulhMesrlineOsnr table |
| 1.3.6.1.4.1.20044.80.3.3.176.1.2 | Columnpm10010ulhMesrlineOsnrPortn | read-only | current | Current OSNR :This OID gives the current OSNR on the Line interface (OSNR = AV_S16/10) (Unit = dB)<Help> This measure gives the current OSNR on the Line interf… |
| 1.3.6.1.4.1.20044.80.4 | Nodepm10010ulhcounters | |||
| 1.3.6.1.4.1.20044.80.4.1 | Nodepm10010ulhCntOther | |||
| 1.3.6.1.4.1.20044.80.4.2 | Nodepm10010ulhCntClient | |||
| 1.3.6.1.4.1.20044.80.4.2.112 | Tablepm10010ulhCntclientInputErrorCounterTable | not-accessible | current | List of pm10010ulhCntclientInputErrorCounter Article |
| 1.3.6.1.4.1.20044.80.4.2.112.1 | Rowpm10010ulhCntclientInputErrorCounterEntry | not-accessible | current | Row definition for the pm10010ulhCntclientInputErrorCounter table |
| 1.3.6.1.4.1.20044.80.4.2.112.1.1 | Columnpm10010ulhCntclientInputErrorCounterIndex | read-only | current | Index definition for the pm10010ulhCntclientInputErrorCounter table |
| 1.3.6.1.4.1.20044.80.4.2.112.1.2 | Columnpm10010ulhCntclientInputErrorCounterValuePortn | read-only | current | Client Input Errors :This counter is increased each time a 10b/8b running disparity error is detected on the Client input stream <Help> This counter gives the … |
| 1.3.6.1.4.1.20044.80.4.2.112.1.3 | Columnpm10010ulhCntclientInputErrorCounterErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the client error counter value is invalid on Port |
| 1.3.6.1.4.1.20044.80.4.2.112.1.4 | Columnpm10010ulhCntclientInputErrorCounterOverloadPortn | read-only | current | Client Counter Overload :This OID when set indicates a client input error counter overload on Port |
| 1.3.6.1.4.1.20044.80.4.2.144 | Tablepm10010ulhCntclientCbipCounterTable | not-accessible | current | List of pm10010ulhCntclientCbipCounter Article |
| 1.3.6.1.4.1.20044.80.4.2.144.1 | Rowpm10010ulhCntclientCbipCounterEntry | not-accessible | current | Row definition for the pm10010ulhCntclientCbipCounter table |
| 1.3.6.1.4.1.20044.80.4.2.144.1.1 | Columnpm10010ulhCntclientCbipCounterIndex | read-only | current | Index definition for the pm10010ulhCntclientCbipCounter table |
| 1.3.6.1.4.1.20044.80.4.2.144.1.2 | Columnpm10010ulhCntclientCbipCounterValuePortn | read-only | current | Client Output Errors :This counter is incremented each time a CBIP parity error is detected on the Client output stream <Help> This counter gives the number of… |
| 1.3.6.1.4.1.20044.80.4.2.144.1.3 | Columnpm10010ulhCntclientCbipCounterErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the CBIP error counter value is invalid on Port |
| 1.3.6.1.4.1.20044.80.4.2.144.1.4 | Columnpm10010ulhCntclientCbipCounterOverloadPortn | read-only | current | Client CBIP Counter Overload :This OID when set indicates a CBIP error counter overload on Port |
| 1.3.6.1.4.1.20044.80.4.3 | Nodepm10010ulhCntLine | |||
| 1.3.6.1.4.1.20044.80.4.3.192 | Tablepm10010ulhCntlocalLineSmBip8ErrorCounterTable | not-accessible | current | List of pm10010ulhCntlocalLineSmBip8ErrorCounter Article |
| 1.3.6.1.4.1.20044.80.4.3.192.1 | Rowpm10010ulhCntlocalLineSmBip8ErrorCounterEntry | not-accessible | current | Row definition for the pm10010ulhCntlocalLineSmBip8ErrorCounter table |
| 1.3.6.1.4.1.20044.80.4.3.192.1.1 | Columnpm10010ulhCntlocalLineSmBip8ErrorCounterIndex | read-only | current | Index definition for the pm10010ulhCntlocalLineSmBip8ErrorCounter table |
| 1.3.6.1.4.1.20044.80.4.3.192.1.2 | Columnpm10010ulhCntlocalLineSmBip8ErrorCounterValuePortn | read-only | current | Uncorrected SD FEC Errors :This OID gives the current Bit Error Rate (residual SM-BIP8 error) after FEC <Help> This counter gives the current Bit Error Rate (r… |
| 1.3.6.1.4.1.20044.80.4.3.192.1.3 | Columnpm10010ulhCntlocalLineSmBip8ErrorCounterErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the B1 error counter value is invalid on Port |
| 1.3.6.1.4.1.20044.80.4.3.192.1.4 | Columnpm10010ulhCntlocalLineSmBip8ErrorCounterOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a B1 error counter overload on Port |
| 1.3.6.1.4.1.20044.80.4.3.193 | Tablepm10010ulhCntlocalLineFecCorrectedErrorsCounterTable | not-accessible | current | List of pm10010ulhCntlocalLineFecCorrectedErrorsCounter Article |
| 1.3.6.1.4.1.20044.80.4.3.193.1 | Rowpm10010ulhCntlocalLineFecCorrectedErrorsCounterEntry | not-accessible | current | Row definition for the pm10010ulhCntlocalLineFecCorrectedErrorsCounter table |
| 1.3.6.1.4.1.20044.80.4.3.193.1.1 | Columnpm10010ulhCntlocalLineFecCorrectedErrorsCounterIndex | read-only | current | Index definition for the pm10010ulhCntlocalLineFecCorrectedErrorsCounter table |
| 1.3.6.1.4.1.20044.80.4.3.193.1.2 | Columnpm10010ulhCntlocalLineFecCorrectedErrorsCounterValuePortn | read-only | current | Line Input HD FEC Corrected Errors :This OID gives the current Bit Error Rate before the Hard Decision FEC <Help> This counter gives the current Bit Error Rate… |
| 1.3.6.1.4.1.20044.80.4.3.193.1.3 | Columnpm10010ulhCntlocalLineFecCorrectedErrorsCounterErrorPortn | read-only | current | FEC Counter Error :This bit when set indicates the FEC corrected errors counter value is invalid on Line |
| 1.3.6.1.4.1.20044.80.4.3.193.1.4 | Columnpm10010ulhCntlocalLineFecCorrectedErrorsCounterOverloadPortn | read-only | current | FEC Counter Overload :This bit when set indicates a FEC corrected errors counter overload on Line |
| 1.3.6.1.4.1.20044.80.4.3.194 | Tablepm10010ulhCntremoteLineSmBip8ErrorCounterTable | not-accessible | current | List of pm10010ulhCntremoteLineSmBip8ErrorCounter Article |
| 1.3.6.1.4.1.20044.80.4.3.194.1 | Rowpm10010ulhCntremoteLineSmBip8ErrorCounterEntry | not-accessible | current | Row definition for the pm10010ulhCntremoteLineSmBip8ErrorCounter table |
| 1.3.6.1.4.1.20044.80.4.3.194.1.1 | Columnpm10010ulhCntremoteLineSmBip8ErrorCounterIndex | read-only | current | Index definition for the pm10010ulhCntremoteLineSmBip8ErrorCounter table |
| 1.3.6.1.4.1.20044.80.4.3.194.1.2 | Columnpm10010ulhCntremoteLineSmBip8ErrorCounterValuePortn | read-only | current | Remote SM BIP8 :This OID gives the current Bit Error Rate (residual SM-BIP8 error) after FEC on the remote side <Help> This counter gives the current Bit Error… |
| 1.3.6.1.4.1.20044.80.4.3.194.1.3 | Columnpm10010ulhCntremoteLineSmBip8ErrorCounterErrorPortn | read-only | current | Remote Counter Error : |
| 1.3.6.1.4.1.20044.80.4.3.194.1.4 | Columnpm10010ulhCntremoteLineSmBip8ErrorCounterOverloadPortn | read-only | current | Remote Counter Overload : |
| 1.3.6.1.4.1.20044.80.4.3.195 | Tablepm10010ulhCntlineDfrmTimCntTable | not-accessible | current | List of pm10010ulhCntlineDfrmTimCnt Article |
| 1.3.6.1.4.1.20044.80.4.3.195.1 | Rowpm10010ulhCntlineDfrmTimCntEntry | not-accessible | current | Row definition for the pm10010ulhCntlineDfrmTimCnt table |
| 1.3.6.1.4.1.20044.80.4.3.195.1.1 | Columnpm10010ulhCntlineDfrmTimCntIndex | read-only | current | Index definition for the pm10010ulhCntlineDfrmTimCnt table |
| 1.3.6.1.4.1.20044.80.4.3.195.1.2 | Columnpm10010ulhCntlineDfrmTimCntValuePortn | read-only | current | Line Timer Counter : |
| 1.3.6.1.4.1.20044.80.4.3.195.1.3 | Columnpm10010ulhCntlineDfrmTimCntErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port |
| 1.3.6.1.4.1.20044.80.4.3.195.1.4 | Columnpm10010ulhCntlineDfrmTimCntOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port |
| 1.3.6.1.4.1.20044.80.4.3.196 | Tablepm10010ulhCntlocalLineTrscvPreSdFecErrorCounterTable | not-accessible | current | List of pm10010ulhCntlocalLineTrscvPreSdFecErrorCounter Article |
| 1.3.6.1.4.1.20044.80.4.3.196.1 | Rowpm10010ulhCntlocalLineTrscvPreSdFecErrorCounterEntry | not-accessible | current | Row definition for the pm10010ulhCntlocalLineTrscvPreSdFecErrorCounter table |
| 1.3.6.1.4.1.20044.80.4.3.196.1.1 | Columnpm10010ulhCntlocalLineTrscvPreSdFecErrorCounterIndex | read-only | current | Index definition for the pm10010ulhCntlocalLineTrscvPreSdFecErrorCounter table |
| 1.3.6.1.4.1.20044.80.4.3.196.1.2 | Columnpm10010ulhCntlocalLineTrscvPreSdFecErrorCounterValuePortn | read-only | current | Pre-SD FEC Errors :This OID gives the current Bit Error Rate before the Soft Decision FEC <Help> This counter gives the current Bit Error Rate before the Soft … |
| 1.3.6.1.4.1.20044.80.4.3.196.1.3 | Columnpm10010ulhCntlocalLineTrscvPreSdFecErrorCounterErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port |
| 1.3.6.1.4.1.20044.80.4.3.196.1.4 | Columnpm10010ulhCntlocalLineTrscvPreSdFecErrorCounterOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port |
| 1.3.6.1.4.1.20044.80.4.3.197 | Tablepm10010ulhCntlocalLineTrscvUncorrectedSdFecErrorCounterTable | not-accessible | current | List of pm10010ulhCntlocalLineTrscvUncorrectedSdFecErrorCounter Article |
| 1.3.6.1.4.1.20044.80.4.3.197.1 | Rowpm10010ulhCntlocalLineTrscvUncorrectedSdFecErrorCounterEntry | not-accessible | current | Row definition for the pm10010ulhCntlocalLineTrscvUncorrectedSdFecErrorCounter table |
| 1.3.6.1.4.1.20044.80.4.3.197.1.1 | Columnpm10010ulhCntlocalLineTrscvUncorrectedSdFecErrorCounterIndex | read-only | current | Index definition for the pm10010ulhCntlocalLineTrscvUncorrectedSdFecErrorCounter table |
| 1.3.6.1.4.1.20044.80.4.3.197.1.2 | Columnpm10010ulhCntlocalLineTrscvUncorrectedSdFecErrorCounterValuePortn | read-only | current | Uncorrected SD FEC Errors :This OID gives the current Bit Error Rate after the Soft Decision FEC (residual) <Help> This counter gives the current Bit Error Rat… |
| 1.3.6.1.4.1.20044.80.4.3.197.1.3 | Columnpm10010ulhCntlocalLineTrscvUncorrectedSdFecErrorCounterErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port |
| 1.3.6.1.4.1.20044.80.4.3.197.1.4 | Columnpm10010ulhCntlocalLineTrscvUncorrectedSdFecErrorCounterOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port |
| 1.3.6.1.4.1.20044.80.4.3.198 | Tablepm10010ulhCntlocalLineTrscvPreSdFecBitCounterTable | not-accessible | current | List of pm10010ulhCntlocalLineTrscvPreSdFecBitCounter Article |
| 1.3.6.1.4.1.20044.80.4.3.198.1 | Rowpm10010ulhCntlocalLineTrscvPreSdFecBitCounterEntry | not-accessible | current | Row definition for the pm10010ulhCntlocalLineTrscvPreSdFecBitCounter table |
| 1.3.6.1.4.1.20044.80.4.3.198.1.1 | Columnpm10010ulhCntlocalLineTrscvPreSdFecBitCounterIndex | read-only | current | Index definition for the pm10010ulhCntlocalLineTrscvPreSdFecBitCounter table |
| 1.3.6.1.4.1.20044.80.4.3.198.1.2 | Columnpm10010ulhCntlocalLineTrscvPreSdFecBitCounterValuePortn | read-only | current | Pre-SD FEC Bit Counter :This OID gives the current Bit count before the Soft Decision FEC <Help> This counter gives the current Bit Count before the Soft Decis… |
| 1.3.6.1.4.1.20044.80.4.3.198.1.3 | Columnpm10010ulhCntlocalLineTrscvPreSdFecBitCounterErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port |
| 1.3.6.1.4.1.20044.80.4.3.198.1.4 | Columnpm10010ulhCntlocalLineTrscvPreSdFecBitCounterOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port |
| 1.3.6.1.4.1.20044.80.4.3.199 | Tablepm10010ulhCntlocalLineTrscvUncorrectedSdFecBitCounterTable | not-accessible | current | List of pm10010ulhCntlocalLineTrscvUncorrectedSdFecBitCounter Article |
| 1.3.6.1.4.1.20044.80.4.3.199.1 | Rowpm10010ulhCntlocalLineTrscvUncorrectedSdFecBitCounterEntry | not-accessible | current | Row definition for the pm10010ulhCntlocalLineTrscvUncorrectedSdFecBitCounter table |
| 1.3.6.1.4.1.20044.80.4.3.199.1.1 | Columnpm10010ulhCntlocalLineTrscvUncorrectedSdFecBitCounterIndex | read-only | current | Index definition for the pm10010ulhCntlocalLineTrscvUncorrectedSdFecBitCounter table |
| 1.3.6.1.4.1.20044.80.4.3.199.1.2 | Columnpm10010ulhCntlocalLineTrscvUncorrectedSdFecBitCounterValuePortn | read-only | current | Uncorrected SD FEC Bit Counter :This OID gives the current Bit count after the Soft Decision FEC (residual) <Help> This counter gives the current Bit Count aft… |
| 1.3.6.1.4.1.20044.80.4.3.199.1.3 | Columnpm10010ulhCntlocalLineTrscvUncorrectedSdFecBitCounterErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port |
| 1.3.6.1.4.1.20044.80.4.3.199.1.4 | Columnpm10010ulhCntlocalLineTrscvUncorrectedSdFecBitCounterOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port |
| 1.3.6.1.4.1.20044.80.6 | Nodepm10010ulhcontrolsWrite | |||
| 1.3.6.1.4.1.20044.80.6.1 | Nodepm10010ulhCtrlOther | |||
| 1.3.6.1.4.1.20044.80.6.1.1 | Nodepm10010ulhCtrlconfMgnt1 | |||
| 1.3.6.1.4.1.20044.80.6.1.1.1 | Scalarpm10010ulhCtrlConf1Load1 | read-write | current | Load Configuration Tables Set Nb 1 :When set this OID enables loading from flash configuration1 into the PM. |
| 1.3.6.1.4.1.20044.80.6.1.1.2 | Scalarpm10010ulhCtrlConf2Load1 | read-write | current | Load Configuration Tables Set Nb 2 :When set this OID enables loading from flash configuration2 into the PM. |
| 1.3.6.1.4.1.20044.80.6.1.1.10 | Scalarpm10010ulhCtrlConf2Flash1 | read-write | current | Write Configuration Tables :This OID saves the current configuration of the PM as configuration2 in the flash. <Help> This control saves the customer configura… |
| 1.3.6.1.4.1.20044.80.6.1.1.14 | Scalarpm10010ulhCtrlConf2Clear1 | read-write | current | Clear Configuration Tables :This OID clears the configuration tables from configuration2 in the flash. <Help> This control restores the default configuration o… |
| 1.3.6.1.4.1.20044.80.6.1.4 | Nodepm10010ulhCtrlsynth4 | |||
| 1.3.6.1.4.1.20044.80.6.1.4.1 | Scalarpm10010ulhCtrlCorrelatOn | read-write | current | Enable Alarm Correlation :This OID enables the alarm correlation in the PM. |
| 1.3.6.1.4.1.20044.80.6.1.4.2 | Scalarpm10010ulhCtrlCorrelatOff | read-write | current | Disable Alarm Correlation :This OID disables the alarm correlation in the PM. |
| 1.3.6.1.4.1.20044.80.6.1.5 | Nodepm10010ulhCtrlswMgnt | |||
| 1.3.6.1.4.1.20044.80.6.1.5.2 | Scalarpm10010ulhCtrlColdReset | read-write | current | PM Cold Reset :This OID, when set, causes a cold reset of the PM. This reset is traffic affecting, and the configuration of PM is reloaded on start-up. <Help> … |
| 1.3.6.1.4.1.20044.80.6.1.5.3 | Scalarpm10010ulhCtrlWarmReset | read-write | current | PM Warm Reset :This OID, when set, causes a warm reset of the PM. This reset is not traffic affecting, and the configuration of PM remains unchanged. <Help> Th… |
| 1.3.6.1.4.1.20044.80.6.1.5.5 | Scalarpm10010ulhCtrlLoadSwBank1 | read-write | current | Set Software Nb 1 As Active :This OID, when set, loads the SW from bank1 into the PM. It must be followed by a reset. <Help> This controls selects the first SW… |
| 1.3.6.1.4.1.20044.80.6.1.5.6 | Scalarpm10010ulhCtrlLoadSwBank2 | read-write | current | Set Software Nb 2 As Active :This OID, when set, loads the SW from bank2 into the PM. It must be followed by a reset. <Help> This controls selects the second S… |
| 1.3.6.1.4.1.20044.80.6.1.6 | Nodepm10010ulhCtrlgwMgnt | |||
| 1.3.6.1.4.1.20044.80.6.1.6.1 | Scalarpm10010ulhCtrlCurrentGwReset | read-write | current | Active Gateware Reset :This OID, when set, resets the active gateware. It is traffic affecting. |
| 1.3.6.1.4.1.20044.80.6.1.6.5 | Scalarpm10010ulhCtrlLoadGwBank1 | read-write | current | Set Gateware Nb 1 As Active :This OID, when set, loads the GW from bank1 (Flash) into the PM. It is followed by an automatic gateware cold reset. <Help> This c… |
| 1.3.6.1.4.1.20044.80.6.1.6.6 | Scalarpm10010ulhCtrlLoadGwBank2 | read-write | current | Set Gateware Nb 2 As Active :This OID, when set, loads the GW from bank2 (Flash) into the PM. It is followed by an automatic gateware cold reset. |
| 1.3.6.1.4.1.20044.80.6.1.6.7 | Scalarpm10010ulhCtrlLoadGwBank3 | read-write | current | Set Gateware Nb 3 As Active :This OID, when set, loads the GW from bank3 (Flash) into the PM. It is followed by an automatic gateware cold reset. <Help> This c… |
| 1.3.6.1.4.1.20044.80.6.1.6.8 | Scalarpm10010ulhCtrlLoadGwBank4 | read-write | current | Set Gateware Nb 4 As Active :This OID, when set, loads the GW from bank4 (Flash) into the PM. It is followed by an automatic gateware cold reset. |
| 1.3.6.1.4.1.20044.80.6.1.192 | Nodepm10010ulhCtrlledTest | |||
| 1.3.6.1.4.1.20044.80.6.1.192.1 | Scalarpm10010ulhCtrlGreenLed | read-write | current | Green Leds Test :This OID switches on all the green Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to green |
| 1.3.6.1.4.1.20044.80.6.1.192.2 | Scalarpm10010ulhCtrlRedLed | read-write | current | Red Leds Test :This OID switches on all the red Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to red |
| 1.3.6.1.4.1.20044.80.6.1.192.3 | Scalarpm10010ulhCtrlLedOff | read-write | current | Leds Off :This OID switches off all the Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to OFF |
| 1.3.6.1.4.1.20044.80.6.1.201 | Nodepm10010ulhCtrlinitSwitchMarvell | |||
| 1.3.6.1.4.1.20044.80.6.1.201.1 | Scalarpm10010ulhCtrlInitSwitchMarvell | read-write | current | Switch Initialization :This OID operates an initialization of the switch managed through the module <Help> This control activates an initialization of the swit… |
| 1.3.6.1.4.1.20044.80.6.1.259 | Nodepm10010ulhCtrlresetCount | |||
| 1.3.6.1.4.1.20044.80.6.1.259.1 | Scalarpm10010ulhCtrlResetcount | read-write | current | Module Count Global Reset :This OID resets all the errors counters on the module <Help > This control initiates a reset of the errors counters on the module |
| 1.3.6.1.4.1.20044.80.6.1.260 | Nodepm10010ulhCtrlresetRmon | |||
| 1.3.6.1.4.1.20044.80.6.1.260.1 | Scalarpm10010ulhCtrlResetrmon | read-write | current | Module Rmon Global Reset :This OID resets all the Rmon counters on the module <Help > This control initiates a reset of the Rmon counters on the module |
| 1.3.6.1.4.1.20044.80.6.1.261 | Nodepm10010ulhCtrlresetMeasurements | |||
| 1.3.6.1.4.1.20044.80.6.1.261.1 | Scalarpm10010ulhCtrlResetmeasurements | read-write | current | Management Meas Global Reset :This OID resets some measurements on the management <Help > This control initiates a reset of some measurements on the management |
| 1.3.6.1.4.1.20044.80.6.2 | Nodepm10010ulhCtrlClient | |||
| 1.3.6.1.4.1.20044.80.6.2.16 | Tablepm10010ulhCtrlaccessLoopTable | not-accessible | current | List of pm10010ulhCtrlaccessLoop Article |
| 1.3.6.1.4.1.20044.80.6.2.16.1 | Rowpm10010ulhCtrlaccessLoopEntry | not-accessible | current | Row definition for the pm10010ulhCtrlaccessLoop table |
| 1.3.6.1.4.1.20044.80.6.2.16.1.1 | Columnpm10010ulhCtrlaccessLoopIndex | read-only | current | Index definition for the pm10010ulhCtrlaccessLoop table |
| 1.3.6.1.4.1.20044.80.6.2.16.1.2 | Columnpm10010ulhCtrlaccessLoopPortn | read-write | current | Client Facility Loopback :This OID, when set at '1' puts the client port in loopback, looping the received 10 Gb/s signal on the transmit 10 Gb/s output. <Help… |
| 1.3.6.1.4.1.20044.80.6.2.17 | Tablepm10010ulhCtrlclientLoopToLineTable | not-accessible | current | List of pm10010ulhCtrlclientLoopToLine Article |
| 1.3.6.1.4.1.20044.80.6.2.17.1 | Rowpm10010ulhCtrlclientLoopToLineEntry | not-accessible | current | Row definition for the pm10010ulhCtrlclientLoopToLine table |
| 1.3.6.1.4.1.20044.80.6.2.17.1.1 | Columnpm10010ulhCtrlclientLoopToLineIndex | read-only | current | Index definition for the pm10010ulhCtrlclientLoopToLine table |
| 1.3.6.1.4.1.20044.80.6.2.17.1.2 | Columnpm10010ulhCtrlclientLoopToLinePortn | read-write | current | Client Terminal Loopback :This OID, when set, puts the client port in loop back, looping the 10 Gb/s output signal on the 10 Gb/s input.<Help> This control ena… |
| 1.3.6.1.4.1.20044.80.6.2.21 | Tablepm10010ulhCtrlcsfUpInsTable | not-accessible | current | List of pm10010ulhCtrlcsfUpIns Article |
| 1.3.6.1.4.1.20044.80.6.2.21.1 | Rowpm10010ulhCtrlcsfUpInsEntry | not-accessible | current | Row definition for the pm10010ulhCtrlcsfUpIns table |
| 1.3.6.1.4.1.20044.80.6.2.21.1.1 | Columnpm10010ulhCtrlcsfUpInsIndex | read-only | current | Index definition for the pm10010ulhCtrlcsfUpIns table |
| 1.3.6.1.4.1.20044.80.6.2.21.1.2 | Columnpm10010ulhCtrlcsfUpInsPortn | read-write | current | Client Signal Fail Insertion :This OID, when set, inserts a client signal fail in the upstream client Port. <Help> This control inserts a Client Signal Fail fo… |
| 1.3.6.1.4.1.20044.80.6.2.22 | Tablepm10010ulhCtrlcaisDwInsTable | not-accessible | current | List of pm10010ulhCtrlcaisDwIns Article |
| 1.3.6.1.4.1.20044.80.6.2.22.1 | Rowpm10010ulhCtrlcaisDwInsEntry | not-accessible | current | Row definition for the pm10010ulhCtrlcaisDwIns table |
| 1.3.6.1.4.1.20044.80.6.2.22.1.1 | Columnpm10010ulhCtrlcaisDwInsIndex | read-only | current | Index definition for the pm10010ulhCtrlcaisDwIns table |
| 1.3.6.1.4.1.20044.80.6.2.22.1.2 | Columnpm10010ulhCtrlcaisDwInsPortn | read-write | current | Client AIS Insertion :This OID, when set, inserts a client AIS on the downstream client Port. <Help> This control inserts a Client AIS for the client port |
| 1.3.6.1.4.1.20044.80.6.2.262 | Tablepm10010ulhCtrlclientResetAllCountTable | not-accessible | current | List of pm10010ulhCtrlclientResetAllCount Article |
| 1.3.6.1.4.1.20044.80.6.2.262.1 | Rowpm10010ulhCtrlclientResetAllCountEntry | not-accessible | current | Row definition for the pm10010ulhCtrlclientResetAllCount table |
| 1.3.6.1.4.1.20044.80.6.2.262.1.1 | Columnpm10010ulhCtrlclientResetAllCountIndex | read-only | current | Index definition for the pm10010ulhCtrlclientResetAllCount table |
| 1.3.6.1.4.1.20044.80.6.2.262.1.2 | Columnpm10010ulhCtrlclientResetAllCountsPortn | read-write | current | Client Counters Reset :This OID resets every counter on the client port <Help> This control operates a reset on the statistics current ,previous and history cl… |
| 1.3.6.1.4.1.20044.80.6.3 | Nodepm10010ulhCtrlLine | |||
| 1.3.6.1.4.1.20044.80.6.3.64 | Tablepm10010ulhCtrlcommAccessLoopTable | not-accessible | current | List of pm10010ulhCtrlcommAccessLoop Article |
| 1.3.6.1.4.1.20044.80.6.3.64.1 | Rowpm10010ulhCtrlcommAccessLoopEntry | not-accessible | current | Row definition for the pm10010ulhCtrlcommAccessLoop table |
| 1.3.6.1.4.1.20044.80.6.3.64.1.1 | Columnpm10010ulhCtrlcommAccessLoopIndex | read-only | current | Index definition for the pm10010ulhCtrlcommAccessLoop table |
| 1.3.6.1.4.1.20044.80.6.3.64.1.2 | Columnpm10010ulhCtrlcommAccessLoopPortn | read-write | current | Line Terminal Loopback :This OID, when set, puts the module in common access loop back, looping the 200 Gb/s output signal on the 200 Gb/s input.<Help> This co… |
| 1.3.6.1.4.1.20044.80.6.3.66 | Tablepm10010ulhCtrllineLoopTable | not-accessible | current | List of pm10010ulhCtrllineLoop Article |
| 1.3.6.1.4.1.20044.80.6.3.66.1 | Rowpm10010ulhCtrllineLoopEntry | not-accessible | current | Row definition for the pm10010ulhCtrllineLoop table |
| 1.3.6.1.4.1.20044.80.6.3.66.1.1 | Columnpm10010ulhCtrllineLoopIndex | read-only | current | Index definition for the pm10010ulhCtrllineLoop table |
| 1.3.6.1.4.1.20044.80.6.3.66.1.2 | Columnpm10010ulhCtrllineLoopPortn | read-write | current | Line Facility Loopback :This OID, when set at '1' puts the module in line loopback mode, looping the received 200 Gb/s signal on the transmit 200 Gb/s output. … |
| 1.3.6.1.4.1.20044.80.6.3.69 | Tablepm10010ulhCtrlfecDisableTable | not-accessible | current | List of pm10010ulhCtrlfecDisable Article |
| 1.3.6.1.4.1.20044.80.6.3.69.1 | Rowpm10010ulhCtrlfecDisableEntry | not-accessible | current | Row definition for the pm10010ulhCtrlfecDisable table |
| 1.3.6.1.4.1.20044.80.6.3.69.1.1 | Columnpm10010ulhCtrlfecDisableIndex | read-only | current | Index definition for the pm10010ulhCtrlfecDisable table |
| 1.3.6.1.4.1.20044.80.6.3.69.1.2 | Columnpm10010ulhCtrlfecDisablePortn | read-write | current | Forward Error Correction Inhibition :This OID, when set, inhibits the Forward Error Correction feature on the line input <Help> This control enables/disables t… |
| 1.3.6.1.4.1.20044.80.6.3.209 | Tablepm10010ulhCtrlmsaLineLoopTable | not-accessible | current | List of pm10010ulhCtrlmsaLineLoop Article |
| 1.3.6.1.4.1.20044.80.6.3.209.1 | Rowpm10010ulhCtrlmsaLineLoopEntry | not-accessible | current | Row definition for the pm10010ulhCtrlmsaLineLoop table |
| 1.3.6.1.4.1.20044.80.6.3.209.1.1 | Columnpm10010ulhCtrlmsaLineLoopIndex | read-only | current | Index definition for the pm10010ulhCtrlmsaLineLoop table |
| 1.3.6.1.4.1.20044.80.6.3.209.1.2 | Columnpm10010ulhCtrlmsaLineLoopPortn | read-write | current | MSA Line Loop :This OID operates a line loopback on the MSA Line <Help> This control defines the line loop back of the line transceiver |
| 1.3.6.1.4.1.20044.80.6.3.210 | Tablepm10010ulhCtrlmsaTxResetTable | not-accessible | current | List of pm10010ulhCtrlmsaTxReset Article |
| 1.3.6.1.4.1.20044.80.6.3.210.1 | Rowpm10010ulhCtrlmsaTxResetEntry | not-accessible | current | Row definition for the pm10010ulhCtrlmsaTxReset table |
| 1.3.6.1.4.1.20044.80.6.3.210.1.1 | Columnpm10010ulhCtrlmsaTxResetIndex | read-only | current | Index definition for the pm10010ulhCtrlmsaTxReset table |
| 1.3.6.1.4.1.20044.80.6.3.210.1.2 | Columnpm10010ulhCtrlmsaTxResetPortn | read-write | current | Line MSA TX Reset :This OID resets the TX portion of the MSA line module <Help > This control initiates a reset of the transmitting side |
| 1.3.6.1.4.1.20044.80.6.3.211 | Tablepm10010ulhCtrlmsaRxResetTable | not-accessible | current | List of pm10010ulhCtrlmsaRxReset Article |
| 1.3.6.1.4.1.20044.80.6.3.211.1 | Rowpm10010ulhCtrlmsaRxResetEntry | not-accessible | current | Row definition for the pm10010ulhCtrlmsaRxReset table |
| 1.3.6.1.4.1.20044.80.6.3.211.1.1 | Columnpm10010ulhCtrlmsaRxResetIndex | read-only | current | Index definition for the pm10010ulhCtrlmsaRxReset table |
| 1.3.6.1.4.1.20044.80.6.3.211.1.2 | Columnpm10010ulhCtrlmsaRxResetPortn | read-write | current | Line MSA RX Reset :This OID resets the RX portion of the MSA line module <Help > This control initiates a reset of the receiving side |
| 1.3.6.1.4.1.20044.80.6.3.212 | Tablepm10010ulhCtrlmsaShutdownTable | not-accessible | current | List of pm10010ulhCtrlmsaShutdown Article |
| 1.3.6.1.4.1.20044.80.6.3.212.1 | Rowpm10010ulhCtrlmsaShutdownEntry | not-accessible | current | Row definition for the pm10010ulhCtrlmsaShutdown table |
| 1.3.6.1.4.1.20044.80.6.3.212.1.1 | Columnpm10010ulhCtrlmsaShutdownIndex | read-only | current | Index definition for the pm10010ulhCtrlmsaShutdown table |
| 1.3.6.1.4.1.20044.80.6.3.212.1.2 | Columnpm10010ulhCtrlmsaShutdownPortn | read-write | current | Line MSA Shutdown :This OID enters a process to shutdown the MSA line module <Help > This control initiates a shutdown of the module |
| 1.3.6.1.4.1.20044.80.6.3.263 | Tablepm10010ulhCtrllineResetAllCountTable | not-accessible | current | List of pm10010ulhCtrllineResetAllCount Article |
| 1.3.6.1.4.1.20044.80.6.3.263.1 | Rowpm10010ulhCtrllineResetAllCountEntry | not-accessible | current | Row definition for the pm10010ulhCtrllineResetAllCount table |
| 1.3.6.1.4.1.20044.80.6.3.263.1.1 | Columnpm10010ulhCtrllineResetAllCountIndex | read-only | current | Index definition for the pm10010ulhCtrllineResetAllCount table |
| 1.3.6.1.4.1.20044.80.6.3.263.1.2 | Columnpm10010ulhCtrllineResetAllCountsPortn | read-write | current | Line Counters Reset :This OID resets every counter on the line port <Help> This control operates a reset on the statistics current ,previous and history line p… |
| 1.3.6.1.4.1.20044.80.7 | Nodepm10010ulhri | |||
| 1.3.6.1.4.1.20044.80.7.1 | Nodepm10010ulhriTable | |||
| 1.3.6.1.4.1.20044.80.7.1.1 | Tablepm10010ulhRinvSfpTable | not-accessible | current | List of the SFPs on the selected module |
| 1.3.6.1.4.1.20044.80.7.1.1.1 | Rowpm10010ulhRinvSfpEntry | not-accessible | current | Row definition for the SFP table |
| 1.3.6.1.4.1.20044.80.7.1.1.1.1 | Columnpm10010ulhRinvSfpIndex | read-only | current | Index for SFP table |
| 1.3.6.1.4.1.20044.80.7.1.1.1.2 | Columnpm10010ulhRinvsfp | read-only | current | Inventory for the SFP: This OID contains the inventory for the SFP |
| 1.3.6.1.4.1.20044.80.7.1.2 | Tablepm10010ulhRinvLineTable | not-accessible | current | List of the XFPs on the selected module |
| 1.3.6.1.4.1.20044.80.7.1.2.1 | Rowpm10010ulhRinvLineEntry | not-accessible | current | Row definition for the XFP table |
| 1.3.6.1.4.1.20044.80.7.1.2.1.1 | Columnpm10010ulhRinvLineIndex | read-only | current | Index for XFP table |
| 1.3.6.1.4.1.20044.80.7.1.2.1.2 | Columnpm10010ulhRinvxfpLine | read-only | current | Inventory for the XFP: This OID contains the inventory for the XFP |
| 1.3.6.1.4.1.20044.80.7.2 | Scalarpm10010ulhRinvReloadInventory | read-write | current | Reload the inventory: This OID triggers an inventory reload. |
| 1.3.6.1.4.1.20044.80.7.3 | Scalarpm10010ulhRinvHwPlatform | read-only | current | HW platform description: This OID contains the description of the Hardware platform. |
| 1.3.6.1.4.1.20044.80.7.4 | Scalarpm10010ulhRinvModulePlatform | read-only | current | Module platform description: This OID contains the description of the Module. |
| 1.3.6.1.4.1.20044.80.7.5 | Scalarpm10010ulhRinvSwPlatform | read-only | current | SW platform description: This OID contains the description of the Software platform. |
| 1.3.6.1.4.1.20044.80.7.6 | Scalarpm10010ulhRinvGwPlatform | read-only | current | GW platform description: This OID contains the description of the Gateware platform. |
| 1.3.6.1.4.1.20044.80.8 | Nodepm10010ulhdownload | |||
| 1.3.6.1.4.1.20044.80.8.1 | Nodepm10010ulhDwlOther | |||
| 1.3.6.1.4.1.20044.80.8.1.0 | Nodepm10010ulhDwlrestartProcess | |||
| 1.3.6.1.4.1.20044.80.8.1.0.1 | Scalarpm10010ulhDwlWarmRestartProcessed | read-only | current | Warm Restart :This OID indicates that the module last restart was a Warm RESTART |
| 1.3.6.1.4.1.20044.80.8.1.0.2 | Scalarpm10010ulhDwlColdRestartProcessed | read-only | current | Cold Restart :This OID indicates that the module last restart was a Cold RESTART |
| 1.3.6.1.4.1.20044.80.8.1.1 | Nodepm10010ulhDwlswBanksUsed | |||
| 1.3.6.1.4.1.20044.80.8.1.1.1 | Scalarpm10010ulhDwlSwBank1Used | read-only | current | SW bank 1 active :This OID indicates the module is working on SW bank 1 <Help> This status indicates if the SW bank 1 is active or standby |
| 1.3.6.1.4.1.20044.80.8.1.1.2 | Scalarpm10010ulhDwlSwBank2Used | read-only | current | SW bank 2 active :This OID indicates the module is working on SW bank 2 <Help> This status indicates if the SW bank 2 is active or standby |
| 1.3.6.1.4.1.20044.80.8.1.1.5 | Scalarpm10010ulhDwlSwBank1Notempty | read-only | current | SW bank 1 loaded :This OID indicates a software is loaded in SW bank 1 <Help> This status indicates if the SW bank 1 contains SW package |
| 1.3.6.1.4.1.20044.80.8.1.1.6 | Scalarpm10010ulhDwlSwBank2Notempty | read-only | current | SW bank 2 loaded :This OID indicates a software is loaded in SW bank 2 <Help> This status indicates if the SW bank 2 contains SW package |
| 1.3.6.1.4.1.20044.80.8.1.2 | Nodepm10010ulhDwlgwBanksUsed | |||
| 1.3.6.1.4.1.20044.80.8.1.2.1 | Scalarpm10010ulhDwlGwBank1Used | read-only | current | GW bank 1 active :This OID indicates the module is working on GW bank 1 <Help> This status indicates if the GW bank 1 is active or standby |
| 1.3.6.1.4.1.20044.80.8.1.2.2 | Scalarpm10010ulhDwlGwBank2Used | read-only | current | GW bank 2 active :This OID indicates the module is working on GW bank 2 |
| 1.3.6.1.4.1.20044.80.8.1.2.3 | Scalarpm10010ulhDwlGwBank3Used | read-only | current | GW bank 3 active :This OID indicates the module is working on GW bank 3 <Help> This status indicates if the GW bank 3 is active or standby |
| 1.3.6.1.4.1.20044.80.8.1.2.4 | Scalarpm10010ulhDwlGwBank4Used | read-only | current | GW bank 4 active :This OID indicates the module is working on GW bank 4 |
| 1.3.6.1.4.1.20044.80.8.1.2.5 | Scalarpm10010ulhDwlGwBank1Notempty | read-only | current | GW bank 1 loaded :This OID indicates a gateware is loaded in GW bank 1 <Help> This status indicates if the GW bank 1 contains GW package |
| 1.3.6.1.4.1.20044.80.8.1.2.6 | Scalarpm10010ulhDwlGwBank2Notempty | read-only | current | GW bank 2 loaded :This OID indicates a gateware is loaded in GW bank 2 |
| 1.3.6.1.4.1.20044.80.8.1.2.7 | Scalarpm10010ulhDwlGwBank3Notempty | read-only | current | GW bank 3 loaded :This OID indicates a gateware is loaded in GW bank 3 <Help> This status indicates if the GW bank 3 contains GW package |
| 1.3.6.1.4.1.20044.80.8.1.2.8 | Scalarpm10010ulhDwlGwBank4Notempty | read-only | current | GW bank 4 loaded :This OID indicates a gateware is loaded in GW bank 4 |
| 1.3.6.1.4.1.20044.80.8.2 | Nodepm10010ulhDwlClient | |||
| 1.3.6.1.4.1.20044.80.8.3 | Nodepm10010ulhDwlLine | |||
| 1.3.6.1.4.1.20044.80.9 | Nodepm10010ulhConfig | |||
| 1.3.6.1.4.1.20044.80.9.1 | Nodepm10010ulhCfgAccessCAisCsf | |||
| 1.3.6.1.4.1.20044.80.9.1.1 | Tablepm10010ulhCfgClientcaiscsfTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.80.9.1.1.1 | Rowpm10010ulhCfgClientcaiscsfEntry | not-accessible | current | Row definition for the accessCAisCsf table |
| 1.3.6.1.4.1.20044.80.9.1.1.1.1 | Columnpm10010ulhCfgClientcaiscsfIndex | read-only | current | Index definition for the clientcaiscsf table |
| 1.3.6.1.4.1.20044.80.9.1.1.1.3 | Columnpm10010ulhCfgReservePortn | read-write | current | CAIS mode on Client Port :This register enables/disables port laser shutdown on CAIS insertion condition |
| 1.3.6.1.4.1.20044.80.9.2 | Nodepm10010ulhCfgStartup | |||
| 1.3.6.1.4.1.20044.80.9.2.1 | Tablepm10010ulhCfgClientStartupTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.80.9.2.1.1 | Rowpm10010ulhCfgClientStartupEntry | not-accessible | current | Row definition for the startup table |
| 1.3.6.1.4.1.20044.80.9.2.1.1.1 | Columnpm10010ulhCfgClientStartupIndex | read-only | current | Index definition for the clientStartup table |
| 1.3.6.1.4.1.20044.80.9.2.1.1.3 | Columnpm10010ulhCfgSystConfPortPortn | read-write | current | Default Settings on Client Port :This register configures the default initialisation settings on the port. |
| 1.3.6.1.4.1.20044.80.9.2.1.1.4 | Columnpm10010ulhCfgNetConfPortPortn | read-write | current | Default Settings on Client Port :This register configures the default initialisation settings on the port. |
| 1.3.6.1.4.1.20044.80.9.2.1.1.14 | Columnpm10010ulhCfgOptionsPortPortn | read-write | current | Default Options on Client Port :This register configures the default options on the port. |
| 1.3.6.1.4.1.20044.80.9.2.2 | Tablepm10010ulhCfgLineStartupTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.80.9.2.2.1 | Rowpm10010ulhCfgLineStartupEntry | not-accessible | current | Row definition for the startup table |
| 1.3.6.1.4.1.20044.80.9.2.2.1.1 | Columnpm10010ulhCfgLineStartupIndex | read-only | current | Index definition for the lineStartup table |
| 1.3.6.1.4.1.20044.80.9.2.2.1.3 | Columnpm10010ulhCfgSystConfLinePortn | read-write | current | Default Settings on Line :This register configures the default initialisation settings on Line |
| 1.3.6.1.4.1.20044.80.9.2.2.1.14 | Columnpm10010ulhCfgOptionsLinePortn | read-write | current | Default Options on Line :This register configures the default options on the line |
| 1.3.6.1.4.1.20044.80.9.2.3 | Tablepm10010ulhCfgXfpTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.80.9.2.3.1 | Rowpm10010ulhCfgXfpEntry | not-accessible | current | Row definition for the startup table |
| 1.3.6.1.4.1.20044.80.9.2.3.1.1 | Columnpm10010ulhCfgXfpIndex | read-only | current | Index definition for the xfp table |
| 1.3.6.1.4.1.20044.80.9.2.3.1.3 | Columnpm10010ulhCfgSystConfMsaLinePortn | read-write | current | Default settings on MSA :This register configures the default initialisation settings on MSA |
| 1.3.6.1.4.1.20044.80.9.3 | Nodepm10010ulhCfgLabels | |||
| 1.3.6.1.4.1.20044.80.9.3.1 | Tablepm10010ulhCfgLabelclientTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.80.9.3.1.1 | Rowpm10010ulhCfgLabelclientEntry | not-accessible | current | Row definition for the labels table |
| 1.3.6.1.4.1.20044.80.9.3.1.1.1 | Columnpm10010ulhCfgLabelclientIndex | read-only | current | Index definition for the labelclient table |
| 1.3.6.1.4.1.20044.80.9.3.1.1.3 | Columnpm10010ulhCfgLabelclientPortn | read-write | current | Default settings on the label of the Ports :These registers configures the default initialisation settings of the labels of the ports. |
| 1.3.6.1.4.1.20044.80.9.3.2 | Tablepm10010ulhCfgLabellineTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.80.9.3.2.1 | Rowpm10010ulhCfgLabellineEntry | not-accessible | current | Row definition for the labels table |
| 1.3.6.1.4.1.20044.80.9.3.2.1.1 | Columnpm10010ulhCfgLabellineIndex | read-only | current | Index definition for the labelline table |
| 1.3.6.1.4.1.20044.80.9.3.2.1.3 | Columnpm10010ulhCfgLabellinePortn | read-write | current | Default settings on the label of the lines :These registers configures the default initialisation settings of the labels of the lines. |
| 1.3.6.1.4.1.20044.80.9.4 | Nodepm10010ulhCfgStartuptlh | |||
| 1.3.6.1.4.1.20044.80.9.4.1 | Tablepm10010ulhCfgOtxtlhTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.80.9.4.1.1 | Rowpm10010ulhCfgOtxtlhEntry | not-accessible | current | Row definition for the startuptlh table |
| 1.3.6.1.4.1.20044.80.9.4.1.1.1 | Columnpm10010ulhCfgOtxtlhIndex | read-only | current | Index definition for the otxtlh table |
| 1.3.6.1.4.1.20044.80.9.4.1.1.6 | Columnpm10010ulhCfgLinePwrLaserPortn | read-write | current | Defaut Line output Power :This register configures the start-up output power of the Line tranceiver (Unit = dBm) |
| 1.3.6.1.4.1.20044.80.9.4.1.1.7 | Columnpm10010ulhCfgLineFCurrentPortn | read-write | current | Default Line transceiver Tx Channel :This register configures the start-up laser channel of the Line Tx transceiver |
| 1.3.6.1.4.1.20044.80.9.4.1.1.8 | Columnpm10010ulhCfgLineGridCurrentPortn | read-write | current | Default Line transceiver Grid :This register configures the start-up laser grid of the Line transceiver |
| 1.3.6.1.4.1.20044.80.9.4.1.1.9 | Columnpm10010ulhCfgFPortn | read-write | current | Default Line TRX lowest Freq :This register configures the start-up lowest frequency of the Line transceiver |
| 1.3.6.1.4.1.20044.80.9.4.1.1.10 | Columnpm10010ulhCfgRxLineFCurrentPortn | read-write | current | Default Line transceiver Rx Channel :This register configures the start-up laser channel of the Line Rx transceiver |
| 1.3.6.1.4.1.20044.80.9.5 | Nodepm10010ulhCfgOther | |||
| 1.3.6.1.4.1.20044.80.9.5.1 | Nodepm10010ulhtablemoduleOther | |||
| 1.3.6.1.4.1.20044.80.9.5.1.2 | Scalarpm10010ulhCfgmode | read-write | current | Default settings on Module :This register selects the configuration mode of the module |
| 1.3.6.1.4.1.20044.80.9.5.1.3 | Scalarpm10010ulhCfgfanLowSpeedThreshold | read-write | current | Default settings on Module :This register selects the speed threshold of the fan's |
| 1.3.6.1.4.1.20044.80.9.5.1.4 | Scalarpm10010ulhCfgfanHighSpeedThreshold | read-write | current | Default settings on Module :This register selects the speed threshold of the fan's |
| 1.3.6.1.4.1.20044.80.9.6 | Nodepm10010ulhCfgStartuptablefive | |||
| 1.3.6.1.4.1.20044.80.9.6.1 | Tablepm10010ulhCfgOtxtlhcapabilitiesTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.80.9.6.1.1 | Rowpm10010ulhCfgOtxtlhcapabilitiesEntry | not-accessible | current | Row definition for the startuptablefive table |
| 1.3.6.1.4.1.20044.80.9.6.1.1.1 | Columnpm10010ulhCfgOtxtlhcapabilitiesIndex | read-only | current | Index definition for the otxtlhcapabilities table |
| 1.3.6.1.4.1.20044.80.9.6.1.1.3 | Columnpm10010ulhCfgComponentTypePortn | read-only | current | Component parameters :This OID defines the component parameters |
| 1.3.6.1.4.1.20044.80.9.6.1.1.4 | Columnpm10010ulhCfgMiscellaneousPortn | read-only | current | Miscellaneous default settings :This OID defines the miscellaneous parameters |
| 1.3.6.1.4.1.20044.80.9.6.1.1.5 | Columnpm10010ulhCfgFirstChannelPortn | read-only | current | Number of the first channel of the component :This OID defines the first channel number of the PM |
| 1.3.6.1.4.1.20044.80.9.6.1.1.6 | Columnpm10010ulhCfgLastChannelPortn | read-only | current | Number of the last channel of the component :This OID defines the last channel number of the PM |
| 1.3.6.1.4.1.20044.80.9.6.1.1.7 | Columnpm10010ulhCfgGridPortn | read-only | current | Grid value of the component :This OID defines the grid of the PM |
| 1.3.6.1.4.1.20044.80.9.257 | Scalarpm10010ulhCfgWriteConfiguration | read-write | current | Write configuration to module:This OID writes the complete configuration to the module |
| 1.3.6.1.4.1.20044.80.10 | Nodepm10010ulhtraps | |||
| 1.3.6.1.4.1.20044.80.10.2 | Scalarpm10010ulhtrapPortNumber | read-only | current | Last port which generates a trap |
| 1.3.6.1.4.1.20044.80.10.3 | Scalarpm10010ulhtrapLineNumber | read-only | current | Last Line which generates a trap |
| 1.3.6.1.4.1.20044.80.10.4 | Scalarpm10010ulhtrapBoardNumber | read-only | current | Last module which generates a trap |
| 1.3.6.1.4.1.20044.80.10.30 | Notificationpm10010ulhLineTrapNotUrgentGoesOn | current | Not urgent Line default is activated | |
| 1.3.6.1.4.1.20044.80.10.31 | Notificationpm10010ulhLineTrapNotUrgentGoesOff | current | Not urgent Line default disappeared | |
| 1.3.6.1.4.1.20044.80.10.32 | Notificationpm10010ulhLineTrapUrgentGoesOn | current | Urgent Line default is activated | |
| 1.3.6.1.4.1.20044.80.10.33 | Notificationpm10010ulhLineTrapUrgentGoesOff | current | Urgent Line default disappeared | |
| 1.3.6.1.4.1.20044.80.10.34 | Notificationpm10010ulhLineTrapCritGoesOn | current | Critical Line default is activated | |
| 1.3.6.1.4.1.20044.80.10.35 | Notificationpm10010ulhLineTrapCritGoesOff | current | Critical Line default disappeared | |
| 1.3.6.1.4.1.20044.80.10.40 | Notificationpm10010ulhClientTrapNotUrgentGoesOn | current | Not urgent client default is activated | |
| 1.3.6.1.4.1.20044.80.10.41 | Notificationpm10010ulhClientTrapNotUrgentGoesOff | current | Not urgent client default disappeared | |
| 1.3.6.1.4.1.20044.80.10.42 | Notificationpm10010ulhClientTrapUrgentGoesOn | current | Urgent client default is activated | |
| 1.3.6.1.4.1.20044.80.10.43 | Notificationpm10010ulhClientTrapUrgentGoesOff | current | Urgent client default disappeared | |
| 1.3.6.1.4.1.20044.80.10.44 | Notificationpm10010ulhClientTrapCritGoesOn | current | Critical client default is activated | |
| 1.3.6.1.4.1.20044.80.10.45 | Notificationpm10010ulhClientTrapCritGoesOff | current | Critical client default disappeared | |
| 1.3.6.1.4.1.20044.80.10.50 | Notificationpm10010ulhPowerTrapUrgentGoesOn | current | Urgent power supply default is activated | |
| 1.3.6.1.4.1.20044.80.10.51 | Notificationpm10010ulhPowerTrapUrgentGoesOff | current | Urgent power supply default disappeared | |
| 1.3.6.1.4.1.20044.80.11 | Nodepm10010ulhMonitoring | |||
| 1.3.6.1.4.1.20044.80.11.1 | Nodepm10010ulhMonOther | |||
| 1.3.6.1.4.1.20044.80.11.1.3 | Nodepm10010ulhMonRmon | |||
| 1.3.6.1.4.1.20044.80.11.2 | Nodepm10010ulhMonClient | |||
| 1.3.6.1.4.1.20044.80.11.2.4 | Nodepm10010ulhMonClientRmonCounter | |||
| 1.3.6.1.4.1.20044.80.11.2.4.16 | Tablepm10010ulhMonupRmonBytesCounterClientInputTable | not-accessible | current | List of pm10010ulhMonupRmonBytesCounterClientInput Article |
| 1.3.6.1.4.1.20044.80.11.2.4.16.1 | Rowpm10010ulhMonupRmonBytesCounterClientInputEntry | not-accessible | current | Row definition for the pm10010ulhMonupRmonBytesCounterClientInput table |
| 1.3.6.1.4.1.20044.80.11.2.4.16.1.1 | Columnpm10010ulhMonupRmonBytesCounterClientInputIndex | read-only | current | Index definition for the pm10010ulhMonupRmonBytesCounterClientInput table |
| 1.3.6.1.4.1.20044.80.11.2.4.16.1.2 | Columnpm10010ulhMonupRmonBytesCounterClientInputValuePortn | read-only | current | Client Input Bytes :This counter is increased each time a data byte is received on the client port <Help> This counter gives the number of bytes received on th… |
| 1.3.6.1.4.1.20044.80.11.2.4.16.1.3 | Columnpm10010ulhMonupRmonBytesCounterClientInputErrorPortn | read-only | current | Bytes Counter Error :This OID when set indicates the Bytes counter value is invalid on client port |
| 1.3.6.1.4.1.20044.80.11.2.4.16.1.4 | Columnpm10010ulhMonupRmonBytesCounterClientInputOverloadPortn | read-only | current | Bytes Counter Overload :This OID when set indicates a Bytes counter overload on client port |
| 1.3.6.1.4.1.20044.80.11.2.4.48 | Tablepm10010ulhMonupRmonCrcErrorsCounterClientInputTable | not-accessible | current | List of pm10010ulhMonupRmonCrcErrorsCounterClientInput Article |
| 1.3.6.1.4.1.20044.80.11.2.4.48.1 | Rowpm10010ulhMonupRmonCrcErrorsCounterClientInputEntry | not-accessible | current | Row definition for the pm10010ulhMonupRmonCrcErrorsCounterClientInput table |
| 1.3.6.1.4.1.20044.80.11.2.4.48.1.1 | Columnpm10010ulhMonupRmonCrcErrorsCounterClientInputIndex | read-only | current | Index definition for the pm10010ulhMonupRmonCrcErrorsCounterClientInput table |
| 1.3.6.1.4.1.20044.80.11.2.4.48.1.2 | Columnpm10010ulhMonupRmonCrcErrorsCounterClientInputValuePortn | read-only | current | Client Input CRC Errors :This counter is increased each time a CRC error is detected on the client port<Help> This counter gives the number of CRC Errors recei… |
| 1.3.6.1.4.1.20044.80.11.2.4.48.1.3 | Columnpm10010ulhMonupRmonCrcErrorsCounterClientInputErrorPortn | read-only | current | CRC Errors Counter Error :This OID when set indicates the CRC Errors counter value is invalid on client port |
| 1.3.6.1.4.1.20044.80.11.2.4.48.1.4 | Columnpm10010ulhMonupRmonCrcErrorsCounterClientInputOverloadPortn | read-only | current | CRC Errors Counter Overload :This OID when set indicates a CRC Errors counter overload on client port |
| 1.3.6.1.4.1.20044.80.11.2.4.80 | Tablepm10010ulhMonupRmonPacketsCounterClientInputTable | not-accessible | current | List of pm10010ulhMonupRmonPacketsCounterClientInput Article |
| 1.3.6.1.4.1.20044.80.11.2.4.80.1 | Rowpm10010ulhMonupRmonPacketsCounterClientInputEntry | not-accessible | current | Row definition for the pm10010ulhMonupRmonPacketsCounterClientInput table |
| 1.3.6.1.4.1.20044.80.11.2.4.80.1.1 | Columnpm10010ulhMonupRmonPacketsCounterClientInputIndex | read-only | current | Index definition for the pm10010ulhMonupRmonPacketsCounterClientInput table |
| 1.3.6.1.4.1.20044.80.11.2.4.80.1.2 | Columnpm10010ulhMonupRmonPacketsCounterClientInputValuePortn | read-only | current | Client Input Packets :This counter is increased each time a packet is received on the client port <Help> This counter gives the number of packets received on t… |
| 1.3.6.1.4.1.20044.80.11.2.4.80.1.3 | Columnpm10010ulhMonupRmonPacketsCounterClientInputErrorPortn | read-only | current | Packets Counter Error :This OID when set indicates the Packets counter value is invalid on client port |
| 1.3.6.1.4.1.20044.80.11.2.4.80.1.4 | Columnpm10010ulhMonupRmonPacketsCounterClientInputOverloadPortn | read-only | current | Packets Counter Overload :This OID when set indicates a Packets counter overload on client port |
| 1.3.6.1.4.1.20044.80.11.2.4.112 | Tablepm10010ulhMonupRmonBroadcastCounterClientInputTable | not-accessible | current | List of pm10010ulhMonupRmonBroadcastCounterClientInput Article |
| 1.3.6.1.4.1.20044.80.11.2.4.112.1 | Rowpm10010ulhMonupRmonBroadcastCounterClientInputEntry | not-accessible | current | Row definition for the pm10010ulhMonupRmonBroadcastCounterClientInput table |
| 1.3.6.1.4.1.20044.80.11.2.4.112.1.1 | Columnpm10010ulhMonupRmonBroadcastCounterClientInputIndex | read-only | current | Index definition for the pm10010ulhMonupRmonBroadcastCounterClientInput table |
| 1.3.6.1.4.1.20044.80.11.2.4.112.1.2 | Columnpm10010ulhMonupRmonBroadcastCounterClientInputValuePortn | read-only | current | Client Input Broadcast Packets :This counter is increased each time a broadcast packet is received on the client port <Help> This counter gives the number of B… |
| 1.3.6.1.4.1.20044.80.11.2.4.112.1.3 | Columnpm10010ulhMonupRmonBroadcastCounterClientInputErrorPortn | read-only | current | Broadcast Counter Error :This OID when set indicates the Broadcast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.80.11.2.4.112.1.4 | Columnpm10010ulhMonupRmonBroadcastCounterClientInputOverloadPortn | read-only | current | Broadcast Counter Overload :This OID when set indicates a Broadcast counter overload on client port |
| 1.3.6.1.4.1.20044.80.11.2.4.144 | Tablepm10010ulhMonupRmonMulticastCounterClientInputTable | not-accessible | current | List of pm10010ulhMonupRmonMulticastCounterClientInput Article |
| 1.3.6.1.4.1.20044.80.11.2.4.144.1 | Rowpm10010ulhMonupRmonMulticastCounterClientInputEntry | not-accessible | current | Row definition for the pm10010ulhMonupRmonMulticastCounterClientInput table |
| 1.3.6.1.4.1.20044.80.11.2.4.144.1.1 | Columnpm10010ulhMonupRmonMulticastCounterClientInputIndex | read-only | current | Index definition for the pm10010ulhMonupRmonMulticastCounterClientInput table |
| 1.3.6.1.4.1.20044.80.11.2.4.144.1.2 | Columnpm10010ulhMonupRmonMulticastCounterClientInputValuePortn | read-only | current | Client Input Multicast Packets :This counter is increased each time a Multicast packet is received on the client port <Help> This counter gives the number of M… |
| 1.3.6.1.4.1.20044.80.11.2.4.144.1.3 | Columnpm10010ulhMonupRmonMulticastCounterClientInputErrorPortn | read-only | current | Multicast Counter Error :This OID when set indicates the Multicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.80.11.2.4.144.1.4 | Columnpm10010ulhMonupRmonMulticastCounterClientInputOverloadPortn | read-only | current | Multicast Counter Overload :This OID when set indicates a Multicast counter overload on client port |
| 1.3.6.1.4.1.20044.80.11.2.4.176 | Tablepm10010ulhMonupRmonPauseFrameCounterClientInputTable | not-accessible | current | List of pm10010ulhMonupRmonPauseFrameCounterClientInput Article |
| 1.3.6.1.4.1.20044.80.11.2.4.176.1 | Rowpm10010ulhMonupRmonPauseFrameCounterClientInputEntry | not-accessible | current | Row definition for the pm10010ulhMonupRmonPauseFrameCounterClientInput table |
| 1.3.6.1.4.1.20044.80.11.2.4.176.1.1 | Columnpm10010ulhMonupRmonPauseFrameCounterClientInputIndex | read-only | current | Index definition for the pm10010ulhMonupRmonPauseFrameCounterClientInput table |
| 1.3.6.1.4.1.20044.80.11.2.4.176.1.2 | Columnpm10010ulhMonupRmonPauseFrameCounterClientInputValuePortn | read-only | current | Client Input Pause Frames :This counter is increased each time a Pause frame is received on the client port <Help> This counter gives the number of Pause frame… |
| 1.3.6.1.4.1.20044.80.11.2.4.176.1.3 | Columnpm10010ulhMonupRmonPauseFrameCounterClientInputErrorPortn | read-only | current | Pause Counter Error :This OID when set indicates the Pause counter value is invalid on client port |
| 1.3.6.1.4.1.20044.80.11.2.4.176.1.4 | Columnpm10010ulhMonupRmonPauseFrameCounterClientInputOverloadPortn | read-only | current | Pause Counter Overload :This OID when set indicates a Pause counter overload on client port |
| 1.3.6.1.4.1.20044.80.11.2.4.304 | Tablepm10010ulhMonupRmonUnicastCounterClientInputTable | not-accessible | current | List of pm10010ulhMonupRmonUnicastCounterClientInput Article |
| 1.3.6.1.4.1.20044.80.11.2.4.304.1 | Rowpm10010ulhMonupRmonUnicastCounterClientInputEntry | not-accessible | current | Row definition for the pm10010ulhMonupRmonUnicastCounterClientInput table |
| 1.3.6.1.4.1.20044.80.11.2.4.304.1.1 | Columnpm10010ulhMonupRmonUnicastCounterClientInputIndex | read-only | current | Index definition for the pm10010ulhMonupRmonUnicastCounterClientInput table |
| 1.3.6.1.4.1.20044.80.11.2.4.304.1.2 | Columnpm10010ulhMonupRmonUnicastCounterClientInputValuePortn | read-only | current | Client Input Unicast Packets :This counter is increased each time a Unicast packet is received on the client port <Help> This counter gives the number of Unica… |
| 1.3.6.1.4.1.20044.80.11.2.4.304.1.3 | Columnpm10010ulhMonupRmonUnicastCounterClientInputErrorPortn | read-only | current | Unicast Counter Error :This OID when set indicates the Unicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.80.11.2.4.304.1.4 | Columnpm10010ulhMonupRmonUnicastCounterClientInputOverloadPortn | read-only | current | Unicast Counter Overload :This OID when set indicates a Unicast counter overload on client port |
| 1.3.6.1.4.1.20044.80.11.2.4.336 | Tablepm10010ulhMonupRmonNonunicastCounterClientInputTable | not-accessible | current | List of pm10010ulhMonupRmonNonunicastCounterClientInput Article |
| 1.3.6.1.4.1.20044.80.11.2.4.336.1 | Rowpm10010ulhMonupRmonNonunicastCounterClientInputEntry | not-accessible | current | Row definition for the pm10010ulhMonupRmonNonunicastCounterClientInput table |
| 1.3.6.1.4.1.20044.80.11.2.4.336.1.1 | Columnpm10010ulhMonupRmonNonunicastCounterClientInputIndex | read-only | current | Index definition for the pm10010ulhMonupRmonNonunicastCounterClientInput table |
| 1.3.6.1.4.1.20044.80.11.2.4.336.1.2 | Columnpm10010ulhMonupRmonNonunicastCounterClientInputValuePortn | read-only | current | Client Input Non Unicast Packets :This counter is increased each time a Non-Unicast packet is received on the client port <Help> This counter gives the number … |
| 1.3.6.1.4.1.20044.80.11.2.4.336.1.3 | Columnpm10010ulhMonupRmonNonunicastCounterClientInputErrorPortn | read-only | current | Non Unicast Counter Error :This OID when set indicates the Non-Unicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.80.11.2.4.336.1.4 | Columnpm10010ulhMonupRmonNonunicastCounterClientInputOverloadPortn | read-only | current | Non Unicast Counter Overload :This OID when set indicates a Non-Unicast counter overload on client port |
| 1.3.6.1.4.1.20044.80.11.2.4.400 | Tablepm10010ulhMondownRmonBytesCounterClientOutputTable | not-accessible | current | List of pm10010ulhMondownRmonBytesCounterClientOutput Article |
| 1.3.6.1.4.1.20044.80.11.2.4.400.1 | Rowpm10010ulhMondownRmonBytesCounterClientOutputEntry | not-accessible | current | Row definition for the pm10010ulhMondownRmonBytesCounterClientOutput table |
| 1.3.6.1.4.1.20044.80.11.2.4.400.1.1 | Columnpm10010ulhMondownRmonBytesCounterClientOutputIndex | read-only | current | Index definition for the pm10010ulhMondownRmonBytesCounterClientOutput table |
| 1.3.6.1.4.1.20044.80.11.2.4.400.1.2 | Columnpm10010ulhMondownRmonBytesCounterClientOutputValuePortn | read-only | current | Client Output Bytes :This counter is increased each time a data byte is transmitted on the client port <Help> This counter gives the number of bytes transmitte… |
| 1.3.6.1.4.1.20044.80.11.2.4.400.1.3 | Columnpm10010ulhMondownRmonBytesCounterClientOutputErrorPortn | read-only | current | Bytes Counter Error :This OID when set indicates the Bytes counter value is invalid on client port |
| 1.3.6.1.4.1.20044.80.11.2.4.400.1.4 | Columnpm10010ulhMondownRmonBytesCounterClientOutputOverloadPortn | read-only | current | Bytes Counter Overload :This OID when set indicates a Bytes counter overload on client port |
| 1.3.6.1.4.1.20044.80.11.2.4.432 | Tablepm10010ulhMondownRmonCrcErrorsCounterClientOutputTable | not-accessible | current | List of pm10010ulhMondownRmonCrcErrorsCounterClientOutput Article |
| 1.3.6.1.4.1.20044.80.11.2.4.432.1 | Rowpm10010ulhMondownRmonCrcErrorsCounterClientOutputEntry | not-accessible | current | Row definition for the pm10010ulhMondownRmonCrcErrorsCounterClientOutput table |
| 1.3.6.1.4.1.20044.80.11.2.4.432.1.1 | Columnpm10010ulhMondownRmonCrcErrorsCounterClientOutputIndex | read-only | current | Index definition for the pm10010ulhMondownRmonCrcErrorsCounterClientOutput table |
| 1.3.6.1.4.1.20044.80.11.2.4.432.1.2 | Columnpm10010ulhMondownRmonCrcErrorsCounterClientOutputValuePortn | read-only | current | Client Output CRC Errors :This counter is increased each time a CRC error is detected on the transmit client port <Help> This counter gives the number of CRC E… |
| 1.3.6.1.4.1.20044.80.11.2.4.432.1.3 | Columnpm10010ulhMondownRmonCrcErrorsCounterClientOutputErrorPortn | read-only | current | CRC Errors Counter Error :This OID when set indicates the CRC Errors counter value is invalid on client port |
| 1.3.6.1.4.1.20044.80.11.2.4.432.1.4 | Columnpm10010ulhMondownRmonCrcErrorsCounterClientOutputOverloadPortn | read-only | current | CRC Errors Counter Overload :This OID when set indicates a CRC Errors counter overload on client port |
| 1.3.6.1.4.1.20044.80.11.2.4.464 | Tablepm10010ulhMondownRmonPacketsCounterClientOutputTable | not-accessible | current | List of pm10010ulhMondownRmonPacketsCounterClientOutput Article |
| 1.3.6.1.4.1.20044.80.11.2.4.464.1 | Rowpm10010ulhMondownRmonPacketsCounterClientOutputEntry | not-accessible | current | Row definition for the pm10010ulhMondownRmonPacketsCounterClientOutput table |
| 1.3.6.1.4.1.20044.80.11.2.4.464.1.1 | Columnpm10010ulhMondownRmonPacketsCounterClientOutputIndex | read-only | current | Index definition for the pm10010ulhMondownRmonPacketsCounterClientOutput table |
| 1.3.6.1.4.1.20044.80.11.2.4.464.1.2 | Columnpm10010ulhMondownRmonPacketsCounterClientOutputValuePortn | read-only | current | Client Output Packets :This counter is increased each time a packet is transmitted on the client port <Help> This counter gives the number of packets transmitt… |
| 1.3.6.1.4.1.20044.80.11.2.4.464.1.3 | Columnpm10010ulhMondownRmonPacketsCounterClientOutputErrorPortn | read-only | current | Packets Counter Error :This OID when set indicates the Packets counter value is invalid on client port |
| 1.3.6.1.4.1.20044.80.11.2.4.464.1.4 | Columnpm10010ulhMondownRmonPacketsCounterClientOutputOverloadPortn | read-only | current | Packets Counter Overload :This OID when set indicates a Packets counter overload on client port |
| 1.3.6.1.4.1.20044.80.11.2.4.496 | Tablepm10010ulhMondownRmonBroadcastCounterClientOutputTable | not-accessible | current | List of pm10010ulhMondownRmonBroadcastCounterClientOutput Article |
| 1.3.6.1.4.1.20044.80.11.2.4.496.1 | Rowpm10010ulhMondownRmonBroadcastCounterClientOutputEntry | not-accessible | current | Row definition for the pm10010ulhMondownRmonBroadcastCounterClientOutput table |
| 1.3.6.1.4.1.20044.80.11.2.4.496.1.1 | Columnpm10010ulhMondownRmonBroadcastCounterClientOutputIndex | read-only | current | Index definition for the pm10010ulhMondownRmonBroadcastCounterClientOutput table |
| 1.3.6.1.4.1.20044.80.11.2.4.496.1.2 | Columnpm10010ulhMondownRmonBroadcastCounterClientOutputValuePortn | read-only | current | Client Output Broadcast Packets :This counter is increased each time a broadcast packet is transmitted on the client port <Help> This counter gives the number … |
| 1.3.6.1.4.1.20044.80.11.2.4.496.1.3 | Columnpm10010ulhMondownRmonBroadcastCounterClientOutputErrorPortn | read-only | current | Broadcast Counter Error :This OID when set indicates the Broadcast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.80.11.2.4.496.1.4 | Columnpm10010ulhMondownRmonBroadcastCounterClientOutputOverloadPortn | read-only | current | Broadcast Counter Overload :This OID when set indicates a Broadcast counter overload on client port |
| 1.3.6.1.4.1.20044.80.11.2.4.528 | Tablepm10010ulhMondownRmonMulticastCounterClientOutputTable | not-accessible | current | List of pm10010ulhMondownRmonMulticastCounterClientOutput Article |
| 1.3.6.1.4.1.20044.80.11.2.4.528.1 | Rowpm10010ulhMondownRmonMulticastCounterClientOutputEntry | not-accessible | current | Row definition for the pm10010ulhMondownRmonMulticastCounterClientOutput table |
| 1.3.6.1.4.1.20044.80.11.2.4.528.1.1 | Columnpm10010ulhMondownRmonMulticastCounterClientOutputIndex | read-only | current | Index definition for the pm10010ulhMondownRmonMulticastCounterClientOutput table |
| 1.3.6.1.4.1.20044.80.11.2.4.528.1.2 | Columnpm10010ulhMondownRmonMulticastCounterClientOutputValuePortn | read-only | current | Client Output Multicast Packets :This counter is increased each time a Multicast packet is transmitted on the client port <Help> This counter gives the number … |
| 1.3.6.1.4.1.20044.80.11.2.4.528.1.3 | Columnpm10010ulhMondownRmonMulticastCounterClientOutputErrorPortn | read-only | current | Multicast Counter Error :This OID when set indicates the Multicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.80.11.2.4.528.1.4 | Columnpm10010ulhMondownRmonMulticastCounterClientOutputOverloadPortn | read-only | current | Multicast Counter Overload :This OID when set indicates a Multicast counter overload on client port |
| 1.3.6.1.4.1.20044.80.11.2.4.560 | Tablepm10010ulhMondownRmonPauseFrameCounterClientOutputTable | not-accessible | current | List of pm10010ulhMondownRmonPauseFrameCounterClientOutput Article |
| 1.3.6.1.4.1.20044.80.11.2.4.560.1 | Rowpm10010ulhMondownRmonPauseFrameCounterClientOutputEntry | not-accessible | current | Row definition for the pm10010ulhMondownRmonPauseFrameCounterClientOutput table |
| 1.3.6.1.4.1.20044.80.11.2.4.560.1.1 | Columnpm10010ulhMondownRmonPauseFrameCounterClientOutputIndex | read-only | current | Index definition for the pm10010ulhMondownRmonPauseFrameCounterClientOutput table |
| 1.3.6.1.4.1.20044.80.11.2.4.560.1.2 | Columnpm10010ulhMondownRmonPauseFrameCounterClientOutputValuePortn | read-only | current | Client Output Pause Frames :This counter is increased each time a Pause frame is transmitted on the client port <Help> This counter gives the number of Pause f… |
| 1.3.6.1.4.1.20044.80.11.2.4.560.1.3 | Columnpm10010ulhMondownRmonPauseFrameCounterClientOutputErrorPortn | read-only | current | Pause Counter Error :This OID when set indicates the Pause counter value is invalid on client port |
| 1.3.6.1.4.1.20044.80.11.2.4.560.1.4 | Columnpm10010ulhMondownRmonPauseFrameCounterClientOutputOverloadPortn | read-only | current | Pause Counter Overload :This OID when set indicates a Pause counter overload on client port |
| 1.3.6.1.4.1.20044.80.11.2.4.688 | Tablepm10010ulhMondownRmonUnicastCounterClientOutputTable | not-accessible | current | List of pm10010ulhMondownRmonUnicastCounterClientOutput Article |
| 1.3.6.1.4.1.20044.80.11.2.4.688.1 | Rowpm10010ulhMondownRmonUnicastCounterClientOutputEntry | not-accessible | current | Row definition for the pm10010ulhMondownRmonUnicastCounterClientOutput table |
| 1.3.6.1.4.1.20044.80.11.2.4.688.1.1 | Columnpm10010ulhMondownRmonUnicastCounterClientOutputIndex | read-only | current | Index definition for the pm10010ulhMondownRmonUnicastCounterClientOutput table |
| 1.3.6.1.4.1.20044.80.11.2.4.688.1.2 | Columnpm10010ulhMondownRmonUnicastCounterClientOutputValuePortn | read-only | current | Client Output Unicast Packets :This counter is increased each time a Unicast packet is transmitted on the client port <Help> This counter gives the number of U… |
| 1.3.6.1.4.1.20044.80.11.2.4.688.1.3 | Columnpm10010ulhMondownRmonUnicastCounterClientOutputErrorPortn | read-only | current | Unicast Counter Error :This OID when set indicates the Unicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.80.11.2.4.688.1.4 | Columnpm10010ulhMondownRmonUnicastCounterClientOutputOverloadPortn | read-only | current | Unicast Counter Overload :This OID when set indicates a Unicast counter overload on client port |
| 1.3.6.1.4.1.20044.80.11.2.4.720 | Tablepm10010ulhMondownRmonNonunicastCounterClientOutputTable | not-accessible | current | List of pm10010ulhMondownRmonNonunicastCounterClientOutput Article |
| 1.3.6.1.4.1.20044.80.11.2.4.720.1 | Rowpm10010ulhMondownRmonNonunicastCounterClientOutputEntry | not-accessible | current | Row definition for the pm10010ulhMondownRmonNonunicastCounterClientOutput table |
| 1.3.6.1.4.1.20044.80.11.2.4.720.1.1 | Columnpm10010ulhMondownRmonNonunicastCounterClientOutputIndex | read-only | current | Index definition for the pm10010ulhMondownRmonNonunicastCounterClientOutput table |
| 1.3.6.1.4.1.20044.80.11.2.4.720.1.2 | Columnpm10010ulhMondownRmonNonunicastCounterClientOutputValuePortn | read-only | current | Client Output Non Unicast Packets :This counter is increased each time a Non-Unicast packet is transmitted on the client port <Help> This counter gives the num… |
| 1.3.6.1.4.1.20044.80.11.2.4.720.1.3 | Columnpm10010ulhMondownRmonNonunicastCounterClientOutputErrorPortn | read-only | current | Non Unicast Counter Error :This OID when set indicates the Non-Unicast counter value is invalid on client port |
| 1.3.6.1.4.1.20044.80.11.2.4.720.1.4 | Columnpm10010ulhMondownRmonNonunicastCounterClientOutputOverloadPortn | read-only | current | Non Unicast Counter Overload :This OID when set indicates a Non-Unicast counter overload on client port |
| 1.3.6.1.4.1.20044.80.11.5 | Nodepm10010ulhMonPerfOther | |||
| 1.3.6.1.4.1.20044.80.11.5.1 | Nodepm10010ulhMonPerfSync | |||
| 1.3.6.1.4.1.20044.80.11.5.1.257 | Scalarpm10010ulhPerfEnable | read-write | current | Perf. Mon. Enable :This OID enables the Performance Monitoring application |
| 1.3.6.1.4.1.20044.80.11.5.1.259 | Scalarpm10010ulhPerf15minSync | read-write | current | Perf. Mon. 15-min sync. :This OID must be used in external synchronisation mode only to send a 15-min synchronisation command |
| 1.3.6.1.4.1.20044.80.11.5.1.260 | Scalarpm10010ulhPerf24hSync | read-write | current | Perf. Mon. 24-hours sync. :This OID must be used in external synchronisation mode only to send a 24-hours synchronisation command |
| 1.3.6.1.4.1.20044.80.11.5.2 | Nodepm10010ulhMonPerfTimeStamp | |||
| 1.3.6.1.4.1.20044.80.11.5.2.1 | Scalarpm10010ulhPerf15MinShort | read-write | current | 15-min period is short :This OID indicates that the 15-min period lasts less than 890 seconds |
| 1.3.6.1.4.1.20044.80.11.5.2.2 | Scalarpm10010ulhPerf15MinLong | read-write | current | 15-min period is long :This OID indicates that the 15-min period lasts more than 910 seconds |
| 1.3.6.1.4.1.20044.80.11.5.2.5 | Scalarpm10010ulhPerf24HoursShort | read-write | current | 24-hours period is short :This OID indicates that 24-hours period lasts less than 86390 seconds |
| 1.3.6.1.4.1.20044.80.11.5.2.6 | Scalarpm10010ulhPerf24HoursLong | read-write | current | 24-hours period is long :This OID indicates that 24-hours period lasts more than 86410 seconds |
| 1.3.6.1.4.1.20044.80.11.5.2.7 | Scalarpm10010ulhPerfCurrent15MinElapsedTime | read-write | current | Current 15min period Elapsed Time :This OID gives the number of seconds elapsed in the current 15-minutes period |
| 1.3.6.1.4.1.20044.80.11.5.2.8 | Scalarpm10010ulhPerfCurrent24HoursElapsedTime | read-write | current | Current 24hours period Elapsed Time :This OID gives the number of seconds elapsed in the current 24-hours period |
| 1.3.6.1.4.1.20044.80.11.6 | Nodepm10010ulhMonPerfClient | |||
| 1.3.6.1.4.1.20044.80.11.6.16 | Tablepm10010ulhPerfTelecomInputClientCurrent15StatTable | not-accessible | current | List of pm10010ulhPerfTelecomInputClientCurrent15Stat Article |
| 1.3.6.1.4.1.20044.80.11.6.16.1 | Rowpm10010ulhPerfTelecomInputClientCurrent15StatEntry | not-accessible | current | Row definition for the pm10010ulhPerfTelecomInputClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.80.11.6.16.1.1 | Columnpm10010ulhPerfTelecomInputClientCurrent15StatIndex | read-only | current | Index definition for the pm10010ulhPerfTelecomInputClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.80.11.6.16.1.2 | Columnpm10010ulhPerfTelecomInputClientCurrent15StatInvCvPortn | read-only | current | Current 15-min EBC counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.80.11.6.16.1.3 | Columnpm10010ulhPerfTelecomInputClientCurrent15StatCvValuePortn | read-only | current | Current 15-min EBC counter :This OID gives the current 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.80.11.6.16.1.4 | Columnpm10010ulhPerfTelecomInputClientCurrent15StatInvEsPortn | read-only | current | Current 15-min ES counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.80.11.6.16.1.5 | Columnpm10010ulhPerfTelecomInputClientCurrent15StatEsValuePortn | read-only | current | Current 15-min ES counter :This OID gives the current 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.80.11.6.16.1.6 | Columnpm10010ulhPerfTelecomInputClientCurrent15StatInvSesPortn | read-only | current | Current 15-min SES counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.80.11.6.16.1.7 | Columnpm10010ulhPerfTelecomInputClientCurrent15StatSesValuePortn | read-only | current | Current 15-min SES counter :This OID gives the current 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.80.11.6.16.1.8 | Columnpm10010ulhPerfTelecomInputClientCurrent15StatInvSefsPortn | read-only | current | Current 15-min SEFS counter inv. :This OID indicates that the current 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.80.11.6.16.1.9 | Columnpm10010ulhPerfTelecomInputClientCurrent15StatSefsValuePortn | read-only | current | Current 15-min SEFS counter :This OID gives the current 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.80.11.6.16.1.10 | Columnpm10010ulhPerfTelecomInputClientCurrent15StatInvUasPortn | read-only | current | Current 15-min UAS counter inv. :This OID indicates that the current 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.80.11.6.16.1.11 | Columnpm10010ulhPerfTelecomInputClientCurrent15StatUasValuePortn | read-only | current | Current 15-min UAS counter :This OID gives the current 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.80.11.6.48 | Tablepm10010ulhPerfTelecomInputClientPast15StatHistoryPort1Table | not-accessible | current | List of pm10010ulhPerfTelecomInputClientPast15StatHistory Article |
| 1.3.6.1.4.1.20044.80.11.6.48.1 | Rowpm10010ulhPerfTelecomInputClientPast15StatHistoryPort1Entry | not-accessible | current | Row definition for the pm10010ulhPerfTelecomInputClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.80.11.6.48.1.1 | Columnpm10010ulhPerfTelecomInputClientPast15StatHistoryPort1Index | read-only | current | Index definition for the pm10010ulhPerfTelecomInputClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.80.11.6.48.1.2 | Columnpm10010ulhPerfTelecomInputClientPast15StatHistoryInvCvPort1 | read-only | current | Previous 15-min EBC counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.80.11.6.48.1.3 | Columnpm10010ulhPerfTelecomInputClientPast15StatHistoryCvValuePort1 | read-only | current | Previous 15-min EBC counter :This OID gives the previous 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.80.11.6.48.1.4 | Columnpm10010ulhPerfTelecomInputClientPast15StatHistoryInvEsPort1 | read-only | current | Previous 15-min ES counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.80.11.6.48.1.5 | Columnpm10010ulhPerfTelecomInputClientPast15StatHistoryEsValuePort1 | read-only | current | Previous 15-min ES counter :This OID gives the previous 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.80.11.6.48.1.6 | Columnpm10010ulhPerfTelecomInputClientPast15StatHistoryInvSesPort1 | read-only | current | Previous 15-min SES counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.80.11.6.48.1.7 | Columnpm10010ulhPerfTelecomInputClientPast15StatHistorySesValuePort1 | read-only | current | Previous 15-min SES counter :This OID gives the previous 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.80.11.6.48.1.8 | Columnpm10010ulhPerfTelecomInputClientPast15StatHistoryInvSefsPort1 | read-only | current | Previous 15-min SEFS counter inv. :This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.80.11.6.48.1.9 | Columnpm10010ulhPerfTelecomInputClientPast15StatHistorySefsValuePort1 | read-only | current | Previous 15-min SEFS counter :This OID gives the previous 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.80.11.6.48.1.10 | Columnpm10010ulhPerfTelecomInputClientPast15StatHistoryInvUasPort1 | read-only | current | Previous 15-min UAS counter inv. :This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.80.11.6.48.1.11 | Columnpm10010ulhPerfTelecomInputClientPast15StatHistoryUasValuePort1 | read-only | current | Previous 15-min UAS counter :This OID gives the previous 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.80.11.6.80 | Tablepm10010ulhPerfTelecomInputClientCurrent24StatTable | not-accessible | current | List of pm10010ulhPerfTelecomInputClientCurrent24Stat Article |
| 1.3.6.1.4.1.20044.80.11.6.80.1 | Rowpm10010ulhPerfTelecomInputClientCurrent24StatEntry | not-accessible | current | Row definition for the pm10010ulhPerfTelecomInputClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.80.11.6.80.1.1 | Columnpm10010ulhPerfTelecomInputClientCurrent24StatIndex | read-only | current | Index definition for the pm10010ulhPerfTelecomInputClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.80.11.6.80.1.2 | Columnpm10010ulhPerfTelecomInputClientCurrent24StatInvCvPortn | read-only | current | Current 24-hours EBC counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.80.11.6.80.1.3 | Columnpm10010ulhPerfTelecomInputClientCurrent24StatCvValuePortn | read-only | current | Current 24-hours EBC counter :This OID gives the current 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.80.11.6.80.1.4 | Columnpm10010ulhPerfTelecomInputClientCurrent24StatInvEsPortn | read-only | current | Current 24-hours ES counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.80.11.6.80.1.5 | Columnpm10010ulhPerfTelecomInputClientCurrent24StatEsValuePortn | read-only | current | Current 24-hours ES counter :This OID gives the current 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.80.11.6.80.1.6 | Columnpm10010ulhPerfTelecomInputClientCurrent24StatInvSesPortn | read-only | current | Current 24-hours SES counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.80.11.6.80.1.7 | Columnpm10010ulhPerfTelecomInputClientCurrent24StatSesValuePortn | read-only | current | Current 24-hours SES counter :This OID gives the current 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.80.11.6.80.1.8 | Columnpm10010ulhPerfTelecomInputClientCurrent24StatInvSefsPortn | read-only | current | Current 24-hours SEFS counter inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.80.11.6.80.1.9 | Columnpm10010ulhPerfTelecomInputClientCurrent24StatSefsValuePortn | read-only | current | Current 24-hours SEFS counter :This OID gives the current 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.80.11.6.80.1.10 | Columnpm10010ulhPerfTelecomInputClientCurrent24StatInvUasPortn | read-only | current | Current 24-hours UAS counter inv. :This OID indicates that the current 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.80.11.6.80.1.11 | Columnpm10010ulhPerfTelecomInputClientCurrent24StatUasValuePortn | read-only | current | Current 24-hours UAS counter :This OID gives the current 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.80.11.6.112 | Tablepm10010ulhPerfTelecomInputClientPast24StatHistoryPort1Table | not-accessible | current | List of pm10010ulhPerfTelecomInputClientPast24StatHistory Article |
| 1.3.6.1.4.1.20044.80.11.6.112.1 | Rowpm10010ulhPerfTelecomInputClientPast24StatHistoryPort1Entry | not-accessible | current | Row definition for the pm10010ulhPerfTelecomInputClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.80.11.6.112.1.1 | Columnpm10010ulhPerfTelecomInputClientPast24StatHistoryPort1Index | read-only | current | Index definition for the pm10010ulhPerfTelecomInputClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.80.11.6.112.1.2 | Columnpm10010ulhPerfTelecomInputClientPast24StatHistoryInvCvPort1 | read-only | current | Previous 24-hours EBC counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.80.11.6.112.1.3 | Columnpm10010ulhPerfTelecomInputClientPast24StatHistoryCvValuePort1 | read-only | current | Previous 24-hours EBC counter :This OID gives the previous 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.80.11.6.112.1.4 | Columnpm10010ulhPerfTelecomInputClientPast24StatHistoryInvEsPort1 | read-only | current | Previous 24-hours ES counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.80.11.6.112.1.5 | Columnpm10010ulhPerfTelecomInputClientPast24StatHistoryEsValuePort1 | read-only | current | Previous 24-hours ES counter :This OID gives the previous 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.80.11.6.112.1.6 | Columnpm10010ulhPerfTelecomInputClientPast24StatHistoryInvSesPort1 | read-only | current | Previous 24-hours SES counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.80.11.6.112.1.7 | Columnpm10010ulhPerfTelecomInputClientPast24StatHistorySesValuePort1 | read-only | current | Previous 24-hours SES counter :This OID gives the previous 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.80.11.6.112.1.8 | Columnpm10010ulhPerfTelecomInputClientPast24StatHistoryInvSefsPort1 | read-only | current | Previous 24-hours SEFS counter inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.80.11.6.112.1.9 | Columnpm10010ulhPerfTelecomInputClientPast24StatHistorySefsValuePort1 | read-only | current | Previous 24-hours SEFS counter :This OID gives the previous 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.80.11.6.112.1.10 | Columnpm10010ulhPerfTelecomInputClientPast24StatHistoryInvUasPort1 | read-only | current | Previous 24-hours UAS counter inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.80.11.6.112.1.11 | Columnpm10010ulhPerfTelecomInputClientPast24StatHistoryUasValuePort1 | read-only | current | Previous 24-hours UAS counter :This OID gives the previous 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.80.11.6.144 | Tablepm10010ulhPerfTelecomOutputClientCurrent15StatTable | not-accessible | current | List of pm10010ulhPerfTelecomOutputClientCurrent15Stat Article |
| 1.3.6.1.4.1.20044.80.11.6.144.1 | Rowpm10010ulhPerfTelecomOutputClientCurrent15StatEntry | not-accessible | current | Row definition for the pm10010ulhPerfTelecomOutputClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.80.11.6.144.1.1 | Columnpm10010ulhPerfTelecomOutputClientCurrent15StatIndex | read-only | current | Index definition for the pm10010ulhPerfTelecomOutputClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.80.11.6.144.1.2 | Columnpm10010ulhPerfTelecomOutputClientCurrent15StatInvCvPortn | read-only | current | Current 15-min EBC counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.80.11.6.144.1.3 | Columnpm10010ulhPerfTelecomOutputClientCurrent15StatCvValuePortn | read-only | current | Current 15-min EBC counter :This OID gives the current 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.80.11.6.144.1.4 | Columnpm10010ulhPerfTelecomOutputClientCurrent15StatInvEsPortn | read-only | current | Current 15-min ES counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.80.11.6.144.1.5 | Columnpm10010ulhPerfTelecomOutputClientCurrent15StatEsValuePortn | read-only | current | Current 15-min ES counter :This OID gives the current 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.80.11.6.144.1.6 | Columnpm10010ulhPerfTelecomOutputClientCurrent15StatInvSesPortn | read-only | current | Current 15-min SES counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.80.11.6.144.1.7 | Columnpm10010ulhPerfTelecomOutputClientCurrent15StatSesValuePortn | read-only | current | Current 15-min SES counter :This OID gives the current 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.80.11.6.144.1.8 | Columnpm10010ulhPerfTelecomOutputClientCurrent15StatInvSefsPortn | read-only | current | Current 15-min SEFS counter inv. :This OID indicates that the current 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.80.11.6.144.1.9 | Columnpm10010ulhPerfTelecomOutputClientCurrent15StatSefsValuePortn | read-only | current | Current 15-min SEFS counter :This OID gives the current 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.80.11.6.144.1.10 | Columnpm10010ulhPerfTelecomOutputClientCurrent15StatInvUasPortn | read-only | current | Current 15-min UAS counter inv. :This OID indicates that the current 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.80.11.6.144.1.11 | Columnpm10010ulhPerfTelecomOutputClientCurrent15StatUasValuePortn | read-only | current | Current 15-min UAS counter :This OID gives the current 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.80.11.6.176 | Tablepm10010ulhPerfTelecomOutputClientPast15StatHistoryPort1Table | not-accessible | current | List of pm10010ulhPerfTelecomOutputClientPast15StatHistory Article |
| 1.3.6.1.4.1.20044.80.11.6.176.1 | Rowpm10010ulhPerfTelecomOutputClientPast15StatHistoryPort1Entry | not-accessible | current | Row definition for the pm10010ulhPerfTelecomOutputClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.80.11.6.176.1.1 | Columnpm10010ulhPerfTelecomOutputClientPast15StatHistoryPort1Index | read-only | current | Index definition for the pm10010ulhPerfTelecomOutputClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.80.11.6.176.1.2 | Columnpm10010ulhPerfTelecomOutputClientPast15StatHistoryInvCvPort1 | read-only | current | Previous 15-min EBC counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.80.11.6.176.1.3 | Columnpm10010ulhPerfTelecomOutputClientPast15StatHistoryCvValuePort1 | read-only | current | Previous 15-min EBC counter :This OID gives the previous 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.80.11.6.176.1.4 | Columnpm10010ulhPerfTelecomOutputClientPast15StatHistoryInvEsPort1 | read-only | current | Previous 15-min ES counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.80.11.6.176.1.5 | Columnpm10010ulhPerfTelecomOutputClientPast15StatHistoryEsValuePort1 | read-only | current | Previous 15-min ES counter :This OID gives the previous 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.80.11.6.176.1.6 | Columnpm10010ulhPerfTelecomOutputClientPast15StatHistoryInvSesPort1 | read-only | current | Previous 15-min SES counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.80.11.6.176.1.7 | Columnpm10010ulhPerfTelecomOutputClientPast15StatHistorySesValuePort1 | read-only | current | Previous 15-min SES counter :This OID gives the previous 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.80.11.6.176.1.8 | Columnpm10010ulhPerfTelecomOutputClientPast15StatHistoryInvSefsPort1 | read-only | current | Previous 15-min SEFS counter inv. :This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.80.11.6.176.1.9 | Columnpm10010ulhPerfTelecomOutputClientPast15StatHistorySefsValuePort1 | read-only | current | Previous 15-min SEFS counter :This OID gives the previous 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.80.11.6.176.1.10 | Columnpm10010ulhPerfTelecomOutputClientPast15StatHistoryInvUasPort1 | read-only | current | Previous 15-min UAS counter inv. :This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.80.11.6.176.1.11 | Columnpm10010ulhPerfTelecomOutputClientPast15StatHistoryUasValuePort1 | read-only | current | Previous 15-min UAS counter :This OID gives the previous 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.80.11.6.208 | Tablepm10010ulhPerfTelecomOutputClientCurrent24StatTable | not-accessible | current | List of pm10010ulhPerfTelecomOutputClientCurrent24Stat Article |
| 1.3.6.1.4.1.20044.80.11.6.208.1 | Rowpm10010ulhPerfTelecomOutputClientCurrent24StatEntry | not-accessible | current | Row definition for the pm10010ulhPerfTelecomOutputClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.80.11.6.208.1.1 | Columnpm10010ulhPerfTelecomOutputClientCurrent24StatIndex | read-only | current | Index definition for the pm10010ulhPerfTelecomOutputClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.80.11.6.208.1.2 | Columnpm10010ulhPerfTelecomOutputClientCurrent24StatInvCvPortn | read-only | current | Current 24-hours EBC counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.80.11.6.208.1.3 | Columnpm10010ulhPerfTelecomOutputClientCurrent24StatCvValuePortn | read-only | current | Current 24-hours EBC counter :This OID gives the current 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.80.11.6.208.1.4 | Columnpm10010ulhPerfTelecomOutputClientCurrent24StatInvEsPortn | read-only | current | Current 24-hours ES counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.80.11.6.208.1.5 | Columnpm10010ulhPerfTelecomOutputClientCurrent24StatEsValuePortn | read-only | current | Current 24-hours ES counter :This OID gives the current 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.80.11.6.208.1.6 | Columnpm10010ulhPerfTelecomOutputClientCurrent24StatInvSesPortn | read-only | current | Current 24-hours SES counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.80.11.6.208.1.7 | Columnpm10010ulhPerfTelecomOutputClientCurrent24StatSesValuePortn | read-only | current | Current 24-hours SES counter :This OID gives the current 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.80.11.6.208.1.8 | Columnpm10010ulhPerfTelecomOutputClientCurrent24StatInvSefsPortn | read-only | current | Current 24-hours SEFS counter inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.80.11.6.208.1.9 | Columnpm10010ulhPerfTelecomOutputClientCurrent24StatSefsValuePortn | read-only | current | Current 24-hours SEFS counter :This OID gives the current 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.80.11.6.208.1.10 | Columnpm10010ulhPerfTelecomOutputClientCurrent24StatInvUasPortn | read-only | current | Current 24-hours UAS counter inv. :This OID indicates that the current 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.80.11.6.208.1.11 | Columnpm10010ulhPerfTelecomOutputClientCurrent24StatUasValuePortn | read-only | current | Current 24-hours UAS counter :This OID gives the current 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.80.11.6.240 | Tablepm10010ulhPerfTelecomOutputClientPast24StatHistoryPort1Table | not-accessible | current | List of pm10010ulhPerfTelecomOutputClientPast24StatHistory Article |
| 1.3.6.1.4.1.20044.80.11.6.240.1 | Rowpm10010ulhPerfTelecomOutputClientPast24StatHistoryPort1Entry | not-accessible | current | Row definition for the pm10010ulhPerfTelecomOutputClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.80.11.6.240.1.1 | Columnpm10010ulhPerfTelecomOutputClientPast24StatHistoryPort1Index | read-only | current | Index definition for the pm10010ulhPerfTelecomOutputClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.80.11.6.240.1.2 | Columnpm10010ulhPerfTelecomOutputClientPast24StatHistoryInvCvPort1 | read-only | current | Previous 24-hours EBC counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.80.11.6.240.1.3 | Columnpm10010ulhPerfTelecomOutputClientPast24StatHistoryCvValuePort1 | read-only | current | Previous 24-hours EBC counter :This OID gives the previous 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.80.11.6.240.1.4 | Columnpm10010ulhPerfTelecomOutputClientPast24StatHistoryInvEsPort1 | read-only | current | Previous 24-hours ES counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.80.11.6.240.1.5 | Columnpm10010ulhPerfTelecomOutputClientPast24StatHistoryEsValuePort1 | read-only | current | Previous 24-hours ES counter :This OID gives the previous 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.80.11.6.240.1.6 | Columnpm10010ulhPerfTelecomOutputClientPast24StatHistoryInvSesPort1 | read-only | current | Previous 24-hours SES counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.80.11.6.240.1.7 | Columnpm10010ulhPerfTelecomOutputClientPast24StatHistorySesValuePort1 | read-only | current | Previous 24-hours SES counter :This OID gives the previous 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.80.11.6.240.1.8 | Columnpm10010ulhPerfTelecomOutputClientPast24StatHistoryInvSefsPort1 | read-only | current | Previous 24-hours SEFS counter inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.80.11.6.240.1.9 | Columnpm10010ulhPerfTelecomOutputClientPast24StatHistorySefsValuePort1 | read-only | current | Previous 24-hours SEFS counter :This OID gives the previous 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.80.11.6.240.1.10 | Columnpm10010ulhPerfTelecomOutputClientPast24StatHistoryInvUasPort1 | read-only | current | Previous 24-hours UAS counter inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.80.11.6.240.1.11 | Columnpm10010ulhPerfTelecomOutputClientPast24StatHistoryUasValuePort1 | read-only | current | Previous 24-hours UAS counter :This OID gives the previous 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.80.11.6.848 | Tablepm10010ulhPerfDatacomClientCurrent15StatTable | not-accessible | current | List of pm10010ulhPerfDatacomClientCurrent15Stat Article |
| 1.3.6.1.4.1.20044.80.11.6.848.1 | Rowpm10010ulhPerfDatacomClientCurrent15StatEntry | not-accessible | current | Row definition for the pm10010ulhPerfDatacomClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.80.11.6.848.1.1 | Columnpm10010ulhPerfDatacomClientCurrent15StatIndex | read-only | current | Index definition for the pm10010ulhPerfDatacomClientCurrent15Stat table |
| 1.3.6.1.4.1.20044.80.11.6.848.1.4 | Columnpm10010ulhperfdatacomclientCurrent15StatInCrcCountInvPortn | read-only | current | Client Current 15-min Input CRC counter inv. :This OID indicates that the current 15-min Input CRC counter is invalid |
| 1.3.6.1.4.1.20044.80.11.6.848.1.5 | Columnpm10010ulhperfdatacomclientCurrent15StatInCrcCountPortn | read-only | current | Client Current 15-min Input CRC counter :This OID gives the current 15-min Input CRC counter value |
| 1.3.6.1.4.1.20044.80.11.6.848.1.6 | Columnpm10010ulhperfdatacomclientCurrent15StatInPacketCountInvPortn | read-only | current | Client Current 15-min Input Packet counter inv. :This OID indicates that the current 15-min Input Packet counter is invalid |
| 1.3.6.1.4.1.20044.80.11.6.848.1.7 | Columnpm10010ulhperfdatacomclientCurrent15StatInPacketCountPortn | read-only | current | Client Current 15-min Input Packet counter :This OID gives the current 15-min Input Packet counter value |
| 1.3.6.1.4.1.20044.80.11.6.848.1.28 | Columnpm10010ulhperfdatacomclientCurrent15StatOutCrcCountInvPortn | read-only | current | Client Current 15-min Output CRC counter inv. :This OID indicates that the current 15-min Output CRC counter is invalid |
| 1.3.6.1.4.1.20044.80.11.6.848.1.29 | Columnpm10010ulhperfdatacomclientCurrent15StatOutCrcCountPortn | read-only | current | Client Current 15-min Output CRC counter :This OID gives the current 15-min Output CRC counter value |
| 1.3.6.1.4.1.20044.80.11.6.848.1.30 | Columnpm10010ulhperfdatacomclientCurrent15StatOutPacketCountInvPortn | read-only | current | Client Current 15-min Output Packet counter inv. :This OID indicates that the current 15-min Output Packets counter is invalid |
| 1.3.6.1.4.1.20044.80.11.6.848.1.31 | Columnpm10010ulhperfdatacomclientCurrent15StatOutPacketCountPortn | read-only | current | Client Current 15-min Output Packet counter :This OID gives the current 15-min Output Packets counter value |
| 1.3.6.1.4.1.20044.80.11.6.880 | Tablepm10010ulhPerfDatacomClientPast15StatHistoryPort1Table | not-accessible | current | List of pm10010ulhPerfDatacomClientPast15StatHistory Article |
| 1.3.6.1.4.1.20044.80.11.6.880.1 | Rowpm10010ulhPerfDatacomClientPast15StatHistoryPort1Entry | not-accessible | current | Row definition for the pm10010ulhPerfDatacomClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.80.11.6.880.1.1 | Columnpm10010ulhPerfDatacomClientPast15StatHistoryPort1Index | read-only | current | Index definition for the pm10010ulhPerfDatacomClientPast15StatHistory table |
| 1.3.6.1.4.1.20044.80.11.6.880.1.4 | Columnpm10010ulhperfdatacomclientPast15StatInCrcCountInvPort1 | read-only | current | Client Past 15-min Input CRC counter inv. :This OID indicates that the past 15-min Input CRC counter is invalid |
| 1.3.6.1.4.1.20044.80.11.6.880.1.5 | Columnpm10010ulhperfdatacomclientPast15StatInCrcCountPort1 | read-only | current | Client Past 15-min Input CRC counter :This OID gives the past 15-min Input CRC counter value |
| 1.3.6.1.4.1.20044.80.11.6.880.1.6 | Columnpm10010ulhperfdatacomclientPast15StatInPacketCountInvPort1 | read-only | current | Client Past 15-min Input Packet counter inv. :This OID indicates that the past 15-min Input Packet counter is invalid |
| 1.3.6.1.4.1.20044.80.11.6.880.1.7 | Columnpm10010ulhperfdatacomclientPast15StatInPacketCountPort1 | read-only | current | Client Past 15-min Input Packet counter :This OID gives the past 15-min Input Packet counter value |
| 1.3.6.1.4.1.20044.80.11.6.880.1.28 | Columnpm10010ulhperfdatacomclientPast15StatOutCrcCountInvPort1 | read-only | current | Client Past 15-min Output CRC counter inv. :This OID indicates that the past 15-min Output CRC counter is invalid |
| 1.3.6.1.4.1.20044.80.11.6.880.1.29 | Columnpm10010ulhperfdatacomclientPast15StatOutCrcCountPort1 | read-only | current | Client Past 15-min Output CRC counter :This OID gives the past 15-min Output CRC counter value |
| 1.3.6.1.4.1.20044.80.11.6.880.1.30 | Columnpm10010ulhperfdatacomclientPast15StatOutPacketCountInvPort1 | read-only | current | Client Past 15-min Output Packet counter inv. :This OID indicates that the past 15-min Output Packets counter is invalid |
| 1.3.6.1.4.1.20044.80.11.6.880.1.31 | Columnpm10010ulhperfdatacomclientPast15StatOutPacketCountPort1 | read-only | current | Client Past 15-min Output Packet counter :This OID gives the past 15-min Output Packets counter value |
| 1.3.6.1.4.1.20044.80.11.6.912 | Tablepm10010ulhPerfDatacomClientCurrent24StatTable | not-accessible | current | List of pm10010ulhPerfDatacomClientCurrent24Stat Article |
| 1.3.6.1.4.1.20044.80.11.6.912.1 | Rowpm10010ulhPerfDatacomClientCurrent24StatEntry | not-accessible | current | Row definition for the pm10010ulhPerfDatacomClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.80.11.6.912.1.1 | Columnpm10010ulhPerfDatacomClientCurrent24StatIndex | read-only | current | Index definition for the pm10010ulhPerfDatacomClientCurrent24Stat table |
| 1.3.6.1.4.1.20044.80.11.6.912.1.4 | Columnpm10010ulhperfdatacomclientCurrent24StatInCrcCountInvPortn | read-only | current | Client Current 24-hours Input CRC counter inv. :This OID indicates that the current 24-hours Input CRC counter is invalid |
| 1.3.6.1.4.1.20044.80.11.6.912.1.5 | Columnpm10010ulhperfdatacomclientCurrent24StatInCrcCountPortn | read-only | current | Client Current 24-hours Input CRC counter :This OID gives the current 24-hours Input CRC counter value |
| 1.3.6.1.4.1.20044.80.11.6.912.1.6 | Columnpm10010ulhperfdatacomclientCurrent24StatInPacketCountInvPortn | read-only | current | Client Current 24-hours Input Packet counter inv. :This OID indicates that the current 24-hours Input Packet counter is invalid |
| 1.3.6.1.4.1.20044.80.11.6.912.1.7 | Columnpm10010ulhperfdatacomclientCurrent24StatInPacketCountPortn | read-only | current | Client Current 24-hours Input Packet counter :This OID gives the current 24-hours Input Packet counter value |
| 1.3.6.1.4.1.20044.80.11.6.912.1.28 | Columnpm10010ulhperfdatacomclientCurrent24StatOutCrcCountInvPortn | read-only | current | Client Current 24-hours Output CRC counter inv. :This OID indicates that the current 24-hours Output CRC counter is invalid |
| 1.3.6.1.4.1.20044.80.11.6.912.1.29 | Columnpm10010ulhperfdatacomclientCurrent24StatOutCrcCountPortn | read-only | current | Client Current 24-hours Output CRC counter :This OID gives the current 24-hours Output CRC counter value |
| 1.3.6.1.4.1.20044.80.11.6.912.1.30 | Columnpm10010ulhperfdatacomclientCurrent24StatOutPacketCountInvPortn | read-only | current | Client Current 24-hours Output Packet counter inv. :This OID indicates that the current 24-hours Output Packets counter is invalid |
| 1.3.6.1.4.1.20044.80.11.6.912.1.31 | Columnpm10010ulhperfdatacomclientCurrent24StatOutPacketCountPortn | read-only | current | Client Current 24-hours Output Packet counter :This OID gives the current 24-hours Output Packets counter value |
| 1.3.6.1.4.1.20044.80.11.6.944 | Tablepm10010ulhPerfDatacomClientPast24StatHistoryPort1Table | not-accessible | current | List of pm10010ulhPerfDatacomClientPast24StatHistory Article |
| 1.3.6.1.4.1.20044.80.11.6.944.1 | Rowpm10010ulhPerfDatacomClientPast24StatHistoryPort1Entry | not-accessible | current | Row definition for the pm10010ulhPerfDatacomClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.80.11.6.944.1.1 | Columnpm10010ulhPerfDatacomClientPast24StatHistoryPort1Index | read-only | current | Index definition for the pm10010ulhPerfDatacomClientPast24StatHistory table |
| 1.3.6.1.4.1.20044.80.11.6.944.1.4 | Columnpm10010ulhperfdatacomclientPast24StatInCrcCountInvPort1 | read-only | current | Client Past 24-hours Input CRC counter inv. :This OID indicates that the past 24-hours Input CRC counter is invalid |
| 1.3.6.1.4.1.20044.80.11.6.944.1.5 | Columnpm10010ulhperfdatacomclientPast24StatInCrcCountPort1 | read-only | current | Client Past 24-hours Input CRC counter :This OID gives the past 24-hours Input CRC counter value |
| 1.3.6.1.4.1.20044.80.11.6.944.1.6 | Columnpm10010ulhperfdatacomclientPast24StatInPacketCountInvPort1 | read-only | current | Client Past 24-hours Input Packet counter inv. :This OID indicates that the past 24-hours Input Packet counter is invalid |
| 1.3.6.1.4.1.20044.80.11.6.944.1.7 | Columnpm10010ulhperfdatacomclientPast24StatInPacketCountPort1 | read-only | current | Client Past 24-hours Input Packet counter :This OID gives the past 24-hours Input Packet counter value |
| 1.3.6.1.4.1.20044.80.11.6.944.1.28 | Columnpm10010ulhperfdatacomclientPast24StatOutCrcCountInvPort1 | read-only | current | Client Past 24-hours Output CRC counter inv. :This OID indicates that the past 24-hours Output CRC counter is invalid |
| 1.3.6.1.4.1.20044.80.11.6.944.1.29 | Columnpm10010ulhperfdatacomclientPast24StatOutCrcCountPort1 | read-only | current | Client Past 24-hours Output CRC counter :This OID gives the past 24-hours Output CRC counter value |
| 1.3.6.1.4.1.20044.80.11.6.944.1.30 | Columnpm10010ulhperfdatacomclientPast24StatOutPacketCountInvPort1 | read-only | current | Client Past 24-hours Output Packet counter inv. :This OID indicates that the past 24-hours Output Packets counter is invalid |
| 1.3.6.1.4.1.20044.80.11.6.944.1.31 | Columnpm10010ulhperfdatacomclientPast24StatOutPacketCountPort1 | read-only | current | Client Past 24-hours Output Packet counter :This OID gives the past 24-hours Output Packets counter value |
| 1.3.6.1.4.1.20044.80.11.7 | Nodepm10010ulhMonPerfLine | |||
| 1.3.6.1.4.1.20044.80.11.7.336 | Tablepm10010ulhPerfTelecomLinePostFecCurrent15StatTable | not-accessible | current | List of pm10010ulhPerfTelecomLinePostFecCurrent15Stat Article |
| 1.3.6.1.4.1.20044.80.11.7.336.1 | Rowpm10010ulhPerfTelecomLinePostFecCurrent15StatEntry | not-accessible | current | Row definition for the pm10010ulhPerfTelecomLinePostFecCurrent15Stat table |
| 1.3.6.1.4.1.20044.80.11.7.336.1.1 | Columnpm10010ulhPerfTelecomLinePostFecCurrent15StatIndex | read-only | current | Index definition for the pm10010ulhPerfTelecomLinePostFecCurrent15Stat table |
| 1.3.6.1.4.1.20044.80.11.7.336.1.2 | Columnpm10010ulhPerfTelecomLinePostFecCurrent15StatInvCvPortn | read-only | current | Current 15-min EBC counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.80.11.7.336.1.3 | Columnpm10010ulhPerfTelecomLinePostFecCurrent15StatCvValuePortn | read-only | current | Current 15-min EBC counter :This OID gives the current 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.80.11.7.336.1.4 | Columnpm10010ulhPerfTelecomLinePostFecCurrent15StatInvEsPortn | read-only | current | Current 15-min ES counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.80.11.7.336.1.5 | Columnpm10010ulhPerfTelecomLinePostFecCurrent15StatEsValuePortn | read-only | current | Current 15-min ES counter :This OID gives the current 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.80.11.7.336.1.6 | Columnpm10010ulhPerfTelecomLinePostFecCurrent15StatInvSesPortn | read-only | current | Current 15-min SES counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.80.11.7.336.1.7 | Columnpm10010ulhPerfTelecomLinePostFecCurrent15StatSesValuePortn | read-only | current | Current 15-min SES counter :This OID gives the current 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.80.11.7.336.1.8 | Columnpm10010ulhPerfTelecomLinePostFecCurrent15StatInvSefsPortn | read-only | current | Current 15-min SEFS counter inv. :This OID indicates that the current 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.80.11.7.336.1.9 | Columnpm10010ulhPerfTelecomLinePostFecCurrent15StatSefsValuePortn | read-only | current | Current 15-min SEFS counter :This OID gives the current 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.80.11.7.336.1.10 | Columnpm10010ulhPerfTelecomLinePostFecCurrent15StatInvUasPortn | read-only | current | Current 15-min UAS counter inv. :This OID indicates that the current 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.80.11.7.336.1.11 | Columnpm10010ulhPerfTelecomLinePostFecCurrent15StatUasValuePortn | read-only | current | Current 15-min UAS counter :This OID gives the current 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.80.11.7.337 | Tablepm10010ulhPerfTelecomLinePostFecPast15StatHistoryPort1Table | not-accessible | current | List of pm10010ulhPerfTelecomLinePostFecPast15StatHistory Article |
| 1.3.6.1.4.1.20044.80.11.7.337.1 | Rowpm10010ulhPerfTelecomLinePostFecPast15StatHistoryPort1Entry | not-accessible | current | Row definition for the pm10010ulhPerfTelecomLinePostFecPast15StatHistory table |
| 1.3.6.1.4.1.20044.80.11.7.337.1.1 | Columnpm10010ulhPerfTelecomLinePostFecPast15StatHistoryPort1Index | read-only | current | Index definition for the pm10010ulhPerfTelecomLinePostFecPast15StatHistory table |
| 1.3.6.1.4.1.20044.80.11.7.337.1.2 | Columnpm10010ulhPerfTelecomLinePostFecPast15StatHistoryInvCvPort1 | read-only | current | Previous 15-min EBC counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.80.11.7.337.1.3 | Columnpm10010ulhPerfTelecomLinePostFecPast15StatHistoryCvValuePort1 | read-only | current | Previous 15-min EBC counter :This OID gives the previous 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.80.11.7.337.1.4 | Columnpm10010ulhPerfTelecomLinePostFecPast15StatHistoryInvEsPort1 | read-only | current | Previous 15-min ES counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.80.11.7.337.1.5 | Columnpm10010ulhPerfTelecomLinePostFecPast15StatHistoryEsValuePort1 | read-only | current | Previous 15-min ES counter :This OID gives the previous 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.80.11.7.337.1.6 | Columnpm10010ulhPerfTelecomLinePostFecPast15StatHistoryInvSesPort1 | read-only | current | Previous 15-min SES counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.80.11.7.337.1.7 | Columnpm10010ulhPerfTelecomLinePostFecPast15StatHistorySesValuePort1 | read-only | current | Previous 15-min SES counter :This OID gives the previous 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.80.11.7.337.1.8 | Columnpm10010ulhPerfTelecomLinePostFecPast15StatHistoryInvSefsPort1 | read-only | current | Previous 15-min SEFS counter inv. :This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.80.11.7.337.1.9 | Columnpm10010ulhPerfTelecomLinePostFecPast15StatHistorySefsValuePort1 | read-only | current | Previous 15-min SEFS counter :This OID gives the previous 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.80.11.7.337.1.10 | Columnpm10010ulhPerfTelecomLinePostFecPast15StatHistoryInvUasPort1 | read-only | current | Previous 15-min UAS counter inv. :This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.80.11.7.337.1.11 | Columnpm10010ulhPerfTelecomLinePostFecPast15StatHistoryUasValuePort1 | read-only | current | Previous 15-min UAS counter :This OID gives the previous 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.80.11.7.338 | Tablepm10010ulhPerfTelecomLinePostFecCurrent24StatTable | not-accessible | current | List of pm10010ulhPerfTelecomLinePostFecCurrent24Stat Article |
| 1.3.6.1.4.1.20044.80.11.7.338.1 | Rowpm10010ulhPerfTelecomLinePostFecCurrent24StatEntry | not-accessible | current | Row definition for the pm10010ulhPerfTelecomLinePostFecCurrent24Stat table |
| 1.3.6.1.4.1.20044.80.11.7.338.1.1 | Columnpm10010ulhPerfTelecomLinePostFecCurrent24StatIndex | read-only | current | Index definition for the pm10010ulhPerfTelecomLinePostFecCurrent24Stat table |
| 1.3.6.1.4.1.20044.80.11.7.338.1.2 | Columnpm10010ulhPerfTelecomLinePostFecCurrent24StatInvCvPortn | read-only | current | Current 24-hours EBC counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.80.11.7.338.1.3 | Columnpm10010ulhPerfTelecomLinePostFecCurrent24StatCvValuePortn | read-only | current | Current 24-hours EBC counter :This OID gives the current 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.80.11.7.338.1.4 | Columnpm10010ulhPerfTelecomLinePostFecCurrent24StatInvEsPortn | read-only | current | Current 24-hours ES counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.80.11.7.338.1.5 | Columnpm10010ulhPerfTelecomLinePostFecCurrent24StatEsValuePortn | read-only | current | Current 24-hours ES counter :This OID gives the current 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.80.11.7.338.1.6 | Columnpm10010ulhPerfTelecomLinePostFecCurrent24StatInvSesPortn | read-only | current | Current 24-hours SES counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.80.11.7.338.1.7 | Columnpm10010ulhPerfTelecomLinePostFecCurrent24StatSesValuePortn | read-only | current | Current 24-hours SES counter :This OID gives the current 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.80.11.7.338.1.8 | Columnpm10010ulhPerfTelecomLinePostFecCurrent24StatInvSefsPortn | read-only | current | Current 24-hours SEFS counter inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.80.11.7.338.1.9 | Columnpm10010ulhPerfTelecomLinePostFecCurrent24StatSefsValuePortn | read-only | current | Current 24-hours SEFS counter :This OID gives the current 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.80.11.7.338.1.10 | Columnpm10010ulhPerfTelecomLinePostFecCurrent24StatInvUasPortn | read-only | current | Current 24-hours UAS counter inv. :This OID indicates that the current 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.80.11.7.338.1.11 | Columnpm10010ulhPerfTelecomLinePostFecCurrent24StatUasValuePortn | read-only | current | Current 24-hours UAS counter :This OID gives the current 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.80.11.7.339 | Tablepm10010ulhPerfTelecomLinePostFecPast24StatHistoryPort1Table | not-accessible | current | List of pm10010ulhPerfTelecomLinePostFecPast24StatHistory Article |
| 1.3.6.1.4.1.20044.80.11.7.339.1 | Rowpm10010ulhPerfTelecomLinePostFecPast24StatHistoryPort1Entry | not-accessible | current | Row definition for the pm10010ulhPerfTelecomLinePostFecPast24StatHistory table |
| 1.3.6.1.4.1.20044.80.11.7.339.1.1 | Columnpm10010ulhPerfTelecomLinePostFecPast24StatHistoryPort1Index | read-only | current | Index definition for the pm10010ulhPerfTelecomLinePostFecPast24StatHistory table |
| 1.3.6.1.4.1.20044.80.11.7.339.1.2 | Columnpm10010ulhPerfTelecomLinePostFecPast24StatHistoryInvCvPort1 | read-only | current | Previous 24-hours EBC counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.80.11.7.339.1.3 | Columnpm10010ulhPerfTelecomLinePostFecPast24StatHistoryCvValuePort1 | read-only | current | Previous 24-hours EBC counter :This OID gives the previous 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.80.11.7.339.1.4 | Columnpm10010ulhPerfTelecomLinePostFecPast24StatHistoryInvEsPort1 | read-only | current | Previous 24-hours ES counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.80.11.7.339.1.5 | Columnpm10010ulhPerfTelecomLinePostFecPast24StatHistoryEsValuePort1 | read-only | current | Previous 24-hours ES counter :This OID gives the previous 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.80.11.7.339.1.6 | Columnpm10010ulhPerfTelecomLinePostFecPast24StatHistoryInvSesPort1 | read-only | current | Previous 24-hours SES counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.80.11.7.339.1.7 | Columnpm10010ulhPerfTelecomLinePostFecPast24StatHistorySesValuePort1 | read-only | current | Previous 24-hours SES counter :This OID gives the previous 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.80.11.7.339.1.8 | Columnpm10010ulhPerfTelecomLinePostFecPast24StatHistoryInvSefsPort1 | read-only | current | Previous 24-hours SEFS counter inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.80.11.7.339.1.9 | Columnpm10010ulhPerfTelecomLinePostFecPast24StatHistorySefsValuePort1 | read-only | current | Previous 24-hours SEFS counter :This OID gives the previous 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.80.11.7.339.1.10 | Columnpm10010ulhPerfTelecomLinePostFecPast24StatHistoryInvUasPort1 | read-only | current | Previous 24-hours UAS counter inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.80.11.7.339.1.11 | Columnpm10010ulhPerfTelecomLinePostFecPast24StatHistoryUasValuePort1 | read-only | current | Previous 24-hours UAS counter :This OID gives the previous 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.80.11.7.352 | Tablepm10010ulhPerfTelecomBerLinePreFecCurrent15StatTable | not-accessible | current | List of pm10010ulhPerfTelecomBerLinePreFecCurrent15Stat Article |
| 1.3.6.1.4.1.20044.80.11.7.352.1 | Rowpm10010ulhPerfTelecomBerLinePreFecCurrent15StatEntry | not-accessible | current | Row definition for the pm10010ulhPerfTelecomBerLinePreFecCurrent15Stat table |
| 1.3.6.1.4.1.20044.80.11.7.352.1.1 | Columnpm10010ulhPerfTelecomBerLinePreFecCurrent15StatIndex | read-only | current | Index definition for the pm10010ulhPerfTelecomBerLinePreFecCurrent15Stat table |
| 1.3.6.1.4.1.20044.80.11.7.352.1.2 | Columnpm10010ulhPerfTelecomBerLinePreFecCurrent15StatInvBerPortn | read-only | current | Current 15-min BER counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.80.11.7.352.1.3 | Columnpm10010ulhPerfTelecomBerLinePreFecCurrent15StatBerValuePortn | read-only | current | Current 15-min BER counter :This OID gives the current 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.80.11.7.352.1.4 | Columnpm10010ulhPerfTelecomBerLinePreFecCurrent15StatInvMinBerPortn | read-only | current | Current 15-min MinBER counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.80.11.7.352.1.5 | Columnpm10010ulhPerfTelecomBerLinePreFecCurrent15StatMinBerValuePortn | read-only | current | Current 15-min MinBER counter :This OID gives the current 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.80.11.7.352.1.6 | Columnpm10010ulhPerfTelecomBerLinePreFecCurrent15StatInvMaxBerPortn | read-only | current | Current 15-min MaxBER counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.80.11.7.352.1.7 | Columnpm10010ulhPerfTelecomBerLinePreFecCurrent15StatMaxBerValuePortn | read-only | current | Current 15-min MaxBER counter :This OID gives the current 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.80.11.7.353 | Tablepm10010ulhPerfTelecomBerLinePreFecPast15StatHistoryPort1Table | not-accessible | current | List of pm10010ulhPerfTelecomBerLinePreFecPast15StatHistory Article |
| 1.3.6.1.4.1.20044.80.11.7.353.1 | Rowpm10010ulhPerfTelecomBerLinePreFecPast15StatHistoryPort1Entry | not-accessible | current | Row definition for the pm10010ulhPerfTelecomBerLinePreFecPast15StatHistory table |
| 1.3.6.1.4.1.20044.80.11.7.353.1.1 | Columnpm10010ulhPerfTelecomBerLinePreFecPast15StatHistoryPort1Index | read-only | current | Index definition for the pm10010ulhPerfTelecomBerLinePreFecPast15StatHistory table |
| 1.3.6.1.4.1.20044.80.11.7.353.1.2 | Columnpm10010ulhPerfTelecomBerLinePreFecPast15StatHistoryInvBerPort1 | read-only | current | Previous 15-min BER counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.80.11.7.353.1.3 | Columnpm10010ulhPerfTelecomBerLinePreFecPast15StatHistoryBerValuePort1 | read-only | current | Previous 15-min BER counter :This OID gives the previous 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.80.11.7.353.1.4 | Columnpm10010ulhPerfTelecomBerLinePreFecPast15StatHistoryInvMinBerPort1 | read-only | current | Previous 15-min MinBER counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.80.11.7.353.1.5 | Columnpm10010ulhPerfTelecomBerLinePreFecPast15StatHistoryMinBerValuePort1 | read-only | current | Previous 15-min MinBER counter :This OID gives the previous 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.80.11.7.353.1.6 | Columnpm10010ulhPerfTelecomBerLinePreFecPast15StatHistoryInvMaxBerPort1 | read-only | current | Previous 15-min MaxBER counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.80.11.7.353.1.7 | Columnpm10010ulhPerfTelecomBerLinePreFecPast15StatHistoryMaxBerValuePort1 | read-only | current | Previous 15-min MaxBER counter :This OID gives the previous 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.80.11.7.354 | Tablepm10010ulhPerfTelecomBerLinePreFecCurrent24StatTable | not-accessible | current | List of pm10010ulhPerfTelecomBerLinePreFecCurrent24Stat Article |
| 1.3.6.1.4.1.20044.80.11.7.354.1 | Rowpm10010ulhPerfTelecomBerLinePreFecCurrent24StatEntry | not-accessible | current | Row definition for the pm10010ulhPerfTelecomBerLinePreFecCurrent24Stat table |
| 1.3.6.1.4.1.20044.80.11.7.354.1.1 | Columnpm10010ulhPerfTelecomBerLinePreFecCurrent24StatIndex | read-only | current | Index definition for the pm10010ulhPerfTelecomBerLinePreFecCurrent24Stat table |
| 1.3.6.1.4.1.20044.80.11.7.354.1.2 | Columnpm10010ulhPerfTelecomBerLinePreFecCurrent24StatInvBerPortn | read-only | current | Current 24-hours BER counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.80.11.7.354.1.3 | Columnpm10010ulhPerfTelecomBerLinePreFecCurrent24StatBerValuePortn | read-only | current | Current 24-hours BER counter :This OID gives the current 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.80.11.7.354.1.4 | Columnpm10010ulhPerfTelecomBerLinePreFecCurrent24StatInvMinBerPortn | read-only | current | Current 24-hoursMinBER counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.80.11.7.354.1.5 | Columnpm10010ulhPerfTelecomBerLinePreFecCurrent24StatMinBerValuePortn | read-only | current | Current 24-hours MinBER counter :This OID gives the current 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.80.11.7.354.1.6 | Columnpm10010ulhPerfTelecomBerLinePreFecCurrent24StatInvMaxBerPortn | read-only | current | Current 24-hours MaxBER counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.80.11.7.354.1.7 | Columnpm10010ulhPerfTelecomBerLinePreFecCurrent24StatMaxBerValuePortn | read-only | current | Current 24-hours MaxBER counter :This OID gives the current 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.80.11.7.355 | Tablepm10010ulhPerfTelecomBerLinePreFecPast24StatHistoryPort1Table | not-accessible | current | List of pm10010ulhPerfTelecomBerLinePreFecPast24StatHistory Article |
| 1.3.6.1.4.1.20044.80.11.7.355.1 | Rowpm10010ulhPerfTelecomBerLinePreFecPast24StatHistoryPort1Entry | not-accessible | current | Row definition for the pm10010ulhPerfTelecomBerLinePreFecPast24StatHistory table |
| 1.3.6.1.4.1.20044.80.11.7.355.1.1 | Columnpm10010ulhPerfTelecomBerLinePreFecPast24StatHistoryPort1Index | read-only | current | Index definition for the pm10010ulhPerfTelecomBerLinePreFecPast24StatHistory table |
| 1.3.6.1.4.1.20044.80.11.7.355.1.2 | Columnpm10010ulhPerfTelecomBerLinePreFecPast24StatHistoryInvBerPort1 | read-only | current | Previous 24-hours BER counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.80.11.7.355.1.3 | Columnpm10010ulhPerfTelecomBerLinePreFecPast24StatHistoryBerValuePort1 | read-only | current | Previous 24-hours BER counter :This OID gives the previous 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.80.11.7.355.1.4 | Columnpm10010ulhPerfTelecomBerLinePreFecPast24StatHistoryInvMinBerPort1 | read-only | current | Previous 24-hours MinBER counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.80.11.7.355.1.5 | Columnpm10010ulhPerfTelecomBerLinePreFecPast24StatHistoryMinBerValuePort1 | read-only | current | Previous 24-hours MinBER counter :This OID gives the previous 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.80.11.7.355.1.6 | Columnpm10010ulhPerfTelecomBerLinePreFecPast24StatHistoryInvMaxBerPort1 | read-only | current | Previous 24-hours MaxBER counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.80.11.7.355.1.7 | Columnpm10010ulhPerfTelecomBerLinePreFecPast24StatHistoryMaxBerValuePort1 | read-only | current | Previous 24-hours MaxBER counter :This OID gives the previous 24-hours severely Errored Second counter value |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Pm10010ulhAdjustValue | INTEGER { otxadjustvalue0(0), otxadjustvalue1(1), otxadjustvalue2(2), otxadjustvalue3(3), otxadjustvalue4(4), otxadjustvalue5(5), otxadjustvalue6(6), otxadjustvalue7(7), otxadjustvalue8(8), otxadjustvalue9(9), otxadjustvalue10(10) } | current | Different values in Adjust mode on OTX-TLH on client and line ports |
| Pm10010ulhClientProtocol | INTEGER { protocolclientvalue0(0), protocolclientvalue1(1), protocolclientvalue2(2), protocolclientvalue3(3), protocolclientvalue4(4), protocolclientvalue5(5), protocolclientvalue6(6), protocolclientvalue7(7), protocolclientvalue8(8) } | current | Different values on the protocol on the client ports |
| Pm10010ulhDccMode | INTEGER { dccNo(0), dccLine1(1), dccLine2(2) } | current | Mode for DCC |
| Pm10010ulhModuleMode | INTEGER { unusedmode(0), mode200gma(1), mode200gmr(2), mode100gulh(3) } | current | Mode for the module |
| Pm10010ulhMultiRate | INTEGER { rate100Mhz(0), rate250Mhz(1), rate500Mhz(2), rate1Ghz(3) } | current | different rate for a client port |
| Pm10010ulhOrxChannel | INTEGER | current | Channel selection on transceiver Rx line ports |
| Pm10010ulhOtxChannel | INTEGER | current | Channel selection on transceiver Tx line ports |
| Pm10010ulhOtxGrid | INTEGER { otxgrid200(200), otxgrid100(100), otxgrid50(50) } | current | Different grids on OTX-TLH on client and line ports |
| Pm10010ulhOtxMode | INTEGER { otx80mode(1), otx60mode(2), otxadjustmode(4) } | current | Different modes on OTX-TLH on client and line ports |
| Pm10010ulhProtocolMode | INTEGER { protocolmodevalue0(0), protocolmodevalue1(1), protocolmodevalue2(2), protocolmodevalue3(3) } | current | Different values on the protocol mode |