EKINOPS-Pm1004-MIB
729 objects
MIB for managing Ekinops modules with PM1004 software
Imported Objects
| EKINOPS-MIB | EkiApiState EkiMeasureType EkiMode ekinops EkiOnOff EkiProtocol EkiState EkiSynchroMode |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.20044.18 | IdentitymodulePm1004 | MIB for managing Ekinops modules with PM1004 software | ||
| 1.3.6.1.4.1.20044.18.2 | Nodepm1004alarms | |||
| 1.3.6.1.4.1.20044.18.2.1 | Nodepm1004AlmOther | |||
| 1.3.6.1.4.1.20044.18.2.1.1 | Nodepm1004AlmOtherNurg | |||
| 1.3.6.1.4.1.20044.18.2.1.1.2 | Nodepm1004AlmsynthAlm2 | |||
| 1.3.6.1.4.1.20044.18.2.1.1.2.1 | Scalarpm1004AlmConfTableSave | read-only | current | PM Configuration Save :This OID is at 1 during the saving of a new configuration table in the module Flash memory. <Condtype> CONF_TABLE_SAVE <Probcause> other… |
| 1.3.6.1.4.1.20044.18.2.1.1.2.2 | Scalarpm1004AlmInvUpload | read-only | current | Inventory Upload :This OID is at 1 during the uploading of PM inventory information. <Condtype> INV_UPLOAD <Probcause> other (1) <Alarmtype> other (1) <Polarit… |
| 1.3.6.1.4.1.20044.18.2.1.1.2.3 | Scalarpm1004AlmConfTableLoad | read-only | current | PM Configuration Load :This OID is at 1 during the loading of configuration tables in the modules RAM. <Condtype> CONF_TABLE_LOAD <Probcause> other (1) <Alarmt… |
| 1.3.6.1.4.1.20044.18.2.1.1.2.4 | Scalarpm1004AlmCorrelatOff | read-only | current | Not Used :This OID, when set, indicates that alarm correlation is not being performed. <Condtype> CORRELAT_OFF <Probcause> other (1) <Alarmtype> other (1) <Pol… |
| 1.3.6.1.4.1.20044.18.2.1.1.2.5 | Scalarpm1004AlmMaintenanceOn | read-only | current | Maintenance Mode :This OID indicates that the PM is in maintenance mode. <Help> This alarm indicates that the maintenance mode is enabled on the PM <Condtype> … |
| 1.3.6.1.4.1.20044.18.2.1.2 | Nodepm1004AlmOtherUrg | |||
| 1.3.6.1.4.1.20044.18.2.1.2.194 | Nodepm1004AlmmodInitFailLevel2 | |||
| 1.3.6.1.4.1.20044.18.2.1.2.194.1 | Scalarpm1004AlmLedFail | read-only | current | Led Fail :This OID indicates that Led register has not been correctly initalized <Help> This alarm indicates if the module LEDs are correctly initialized <Cond… |
| 1.3.6.1.4.1.20044.18.2.1.2.194.2 | Scalarpm1004AlmNextColdBootForced | read-only | current | Next Cold Boot Forced :This OID indicates that the next Reset will be forced Cold <Help> This alarm indicates that the next reset of the module will be forced … |
| 1.3.6.1.4.1.20044.18.2.1.2.194.3 | Scalarpm1004AlmBootUndone | read-only | current | Boot Undone :This OID indicates that the boot has not been correctly achieved <Help> This alarm indicates if the module has correctly boot <Condtype> BOOT_UNDO… |
| 1.3.6.1.4.1.20044.18.2.1.2.194.4 | Scalarpm1004AlmResetHwInitFail | read-only | current | Reset HW Init Fail :This OID indicates that the HW intialization has caused unknown intial conditions <Help> This alarm indicates if the HW has been correctly … |
| 1.3.6.1.4.1.20044.18.2.1.2.194.5 | Scalarpm1004AlmSwInitFail | read-only | current | SW Init Fail :This OID indicates that the SW intialization has caused unknown intial conditions <Help> This alarm indicates if the SW module is correctly initi… |
| 1.3.6.1.4.1.20044.18.2.1.2.195 | Nodepm1004AlmmodInitFailLevel3 | |||
| 1.3.6.1.4.1.20044.18.2.1.2.195.1 | Scalarpm1004AlmGwIdentFail | read-only | current | GW Ident Fail :This OID indicates that GW identification has not been read <Help> This alarm indicates if the GW has been correctly identified <Condtype> GW_ID… |
| 1.3.6.1.4.1.20044.18.2.1.2.195.2 | Scalarpm1004AlmObmTypeReadFail | read-only | current | OBM Type Read Fail :This OID indicates that OBM type has not been recognized <Help> This alarm indicates if the OBM board has been correctly identified <Condty… |
| 1.3.6.1.4.1.20044.18.2.1.2.195.3 | Scalarpm1004AlmInitModuleFail | read-only | current | Init Module Fail :This OID indicates that the Module has not been correctly initialized <Help> This alarm indicates if the SW module is correctly initialized <… |
| 1.3.6.1.4.1.20044.18.2.1.2.195.5 | Scalarpm1004AlmXfp1InitFail | read-only | current | XFP1 Init Fail :This OID indicates that the XFP has not been correctly initialized <Help> This alarm indicates if the line transceiver 1 is correctly initializ… |
| 1.3.6.1.4.1.20044.18.2.1.2.195.6 | Scalarpm1004AlmXfp2InitFail | read-only | current | XFP2 Init Fail :This OID indicates that the XFP has not been correctly initialized <Help> This alarm indicates if the line transceiver 2 is correctly initializ… |
| 1.3.6.1.4.1.20044.18.2.1.2.195.7 | Scalarpm1004AlmLine1InitFail | read-only | current | Line1 Init Fail :This OID indicates that the Line registersvsubset has not been correctly initialized <Help> This alarm indicates if the line port 1 is correct… |
| 1.3.6.1.4.1.20044.18.2.1.2.195.8 | Scalarpm1004AlmLine2InitFail | read-only | current | Line2 Init Fail :This OID indicates that the Line register subset has not been correctly initialized <Help> This alarm indicates if the line port 2 is correctl… |
| 1.3.6.1.4.1.20044.18.2.1.2.195.9 | Scalarpm1004AlmClient1InitFail | read-only | current | Client1 Init Fail :This OID indicates that Client 1 registers subset has not been correctly initialized <Help> This alarm indicates if the client port 1 is cor… |
| 1.3.6.1.4.1.20044.18.2.1.2.195.10 | Scalarpm1004AlmClient2InitFail | read-only | current | Client2 Init Fail :This OID indicates that Client 2 registers subset has not been correctly initialized <Help> This alarm indicates if the client port 2 is cor… |
| 1.3.6.1.4.1.20044.18.2.1.2.195.11 | Scalarpm1004AlmClient3InitFail | read-only | current | Client3 Init Fail :This OID indicates that Client 3 registers subset has not been correctly initialized <Help> This alarm indicates if the client port 3 is cor… |
| 1.3.6.1.4.1.20044.18.2.1.2.195.12 | Scalarpm1004AlmClient4InitFail | read-only | current | Client4 Init Fail :This OID indicates that Client 4 registers subset has not been correctly initialized <Help> This alarm indicates if the client port 4 is cor… |
| 1.3.6.1.4.1.20044.18.2.1.3 | Nodepm1004AlmOtherCrit | |||
| 1.3.6.1.4.1.20044.18.2.1.3.0 | Nodepm1004AlmsynthAlm0 | |||
| 1.3.6.1.4.1.20044.18.2.1.3.0.9 | Scalarpm1004AlmModGlobFail | read-only | current | Module Failure :This OID is set on detection of a failure originating from the PM <Condtype> MOD_GLOB_FAIL <Probcause> equipmentMalfunction (16) <Alarmtype> sy… |
| 1.3.6.1.4.1.20044.18.2.1.3.0.15 | Scalarpm1004AlmDefFuseA | read-only | current | Fuse A Fail :This OID indicates that the fuse of the power input A is in fail condition <Help> Status of the Fuse A <Condtype> DEF_FUSE_A <Probcause> powerProb… |
| 1.3.6.1.4.1.20044.18.2.1.3.0.16 | Scalarpm1004AlmDefFuseB | read-only | current | Fuse B Fail :This OID indicates that the fuse of the power input B is in fail condition <Help> Status of the Fuse B <Condtype> DEF_FUSE_B <Probcause> powerProb… |
| 1.3.6.1.4.1.20044.18.2.2 | Nodepm1004AlmClient | |||
| 1.3.6.1.4.1.20044.18.2.2.1 | Nodepm1004AlmClientNurg | |||
| 1.3.6.1.4.1.20044.18.2.2.1.48 | Tablepm1004AlmsfpWarnDdmTable | not-accessible | current | List of pm1004AlmsfpWarnDdm Articl e |
| 1.3.6.1.4.1.20044.18.2.2.1.48.1 | Rowpm1004AlmsfpWarnDdmEntry | not-accessible | current | Row definition for the pm1004AlmsfpWarnDdm table |
| 1.3.6.1.4.1.20044.18.2.2.1.48.1.1 | Columnpm1004AlmsfpWarnDdmIndex | read-only | current | Index definition for the pm1004AlmsfpWarnDdm table |
| 1.3.6.1.4.1.20044.18.2.2.1.48.1.2 | Columnpm1004AlmTxPwLowWngPortn | read-only | current | Client SFP Tx Power Low Warning :Warning indicating that the SFP output power of port is lower than the threshold value written in the SFP EEPROM <Condtype> TX… |
| 1.3.6.1.4.1.20044.18.2.2.1.48.1.3 | Columnpm1004AlmTxPwrHighWngPortn | read-only | current | Client SFP Tx Power High Warning :Warning indicating that the SFP output power of port is higher than the threshold value written in the SFP EEPROM <Condtype> … |
| 1.3.6.1.4.1.20044.18.2.2.1.48.1.4 | Columnpm1004AlmTxBiasLowWngPortn | read-only | current | Client SFP Bias Low Warning :Warning indicating that the SFP laser bias current of port is lower than the threshold value written in the SFP EEPROM <Condtype> … |
| 1.3.6.1.4.1.20044.18.2.2.1.48.1.5 | Columnpm1004AlmTxBiasHighWngPortn | read-only | current | Client SFP Bias High Warning :Warning indicating that the SFP laser bias current of port is higher than the threshold value written in the SFP EEPROM <Condtype… |
| 1.3.6.1.4.1.20044.18.2.2.1.48.1.6 | Columnpm1004AlmVccLowWngPortn | read-only | current | Client SFP Power Supply Low Warning :Warning indicating that the SFP power supply of port is lower than the threshold value written in the SFP EEPROM <Condtype… |
| 1.3.6.1.4.1.20044.18.2.2.1.48.1.7 | Columnpm1004AlmVccHighWngPortn | read-only | current | Client SFP Power Supply High Warning :Warning indicating that the SFP power supply of port is higher than the threshold value written in the SFP EEPROM <Condty… |
| 1.3.6.1.4.1.20044.18.2.2.1.48.1.8 | Columnpm1004AlmTempLowWngPortn | read-only | current | Client SFP Temp Low Warning :Warning indicating that the SFP temperature of port is lower than the threshold value written in the SFP EEPROM <Condtype> TEMP_LO… |
| 1.3.6.1.4.1.20044.18.2.2.1.48.1.9 | Columnpm1004AlmTempHighWngPortn | read-only | current | Client SFP Temp High Warning :Warning indicating that the SFP temperature of port is higher than the threshold value written in the SFP EEPROM <Condtype> TEMP_… |
| 1.3.6.1.4.1.20044.18.2.2.1.48.1.16 | Columnpm1004AlmRxPwrLowWngPortn | read-only | current | Client SFP Rx Power Low Warning :Warning indicating that the SFP input power of port is lower than the threshold value written in the SFP EEPROM <Condtype> RX_… |
| 1.3.6.1.4.1.20044.18.2.2.1.48.1.17 | Columnpm1004AlmRxPwrHighWngPortn | read-only | current | Client SFP Rx Power High Warning :Warning indicating that the SFP input power of port is higher than the threshold value written in the SFP EEPROM <Condtype> R… |
| 1.3.6.1.4.1.20044.18.2.2.1.96 | Tablepm1004Almk1K2ClientTable | not-accessible | current | List of pm1004Almk1K2Client Articl e |
| 1.3.6.1.4.1.20044.18.2.2.1.96.1 | Rowpm1004Almk1K2ClientEntry | not-accessible | current | Row definition for the pm1004Almk1K2Client table |
| 1.3.6.1.4.1.20044.18.2.2.1.96.1.1 | Columnpm1004Almk1K2ClientIndex | read-only | current | Index definition for the pm1004Almk1K2Client table |
| 1.3.6.1.4.1.20044.18.2.2.1.96.1.2 | Columnpm1004Almk1K2ClientPortn | read-only | current | Client K1-K2 Extracted Value :This OID gives the value of K1 (LSB) and K2 (MSB) extracted from the overhead of the received OC-48c/STM-16c signal <Condtype> CL… |
| 1.3.6.1.4.1.20044.18.2.2.2 | Nodepm1004AlmClientUrg | |||
| 1.3.6.1.4.1.20044.18.2.2.2.32 | Tablepm1004AlmsfpAlmDdmTable | not-accessible | current | List of pm1004AlmsfpAlmDdm Articl e |
| 1.3.6.1.4.1.20044.18.2.2.2.32.1 | Rowpm1004AlmsfpAlmDdmEntry | not-accessible | current | Row definition for the pm1004AlmsfpAlmDdm table |
| 1.3.6.1.4.1.20044.18.2.2.2.32.1.1 | Columnpm1004AlmsfpAlmDdmIndex | read-only | current | Index definition for the pm1004AlmsfpAlmDdm table |
| 1.3.6.1.4.1.20044.18.2.2.2.32.1.2 | Columnpm1004AlmTxPwrLowAlaPortn | read-only | current | Client SFP Tx Power Low :Alarm indicating that the SFP output power of port is lower than the threshold value written in the SFP EEPROM <Condtype> TX_PWR_LOW_A… |
| 1.3.6.1.4.1.20044.18.2.2.2.32.1.3 | Columnpm1004AlmTxPwrHighAlaPortn | read-only | current | Client SFP Tx Power High :Alarm indicating that the SFP output power of port is higher than the threshold value written in the SFP EEPROM <Condtype> TX_PWR_HIG… |
| 1.3.6.1.4.1.20044.18.2.2.2.32.1.4 | Columnpm1004AlmTxBiasLowAlaPortn | read-only | current | Client SFP Bias Low :Alarm indicating that the SFP laser bias current of port is lower than the threshold value written in the SFP EEPROM <Condtype> TX_BIAS_LO… |
| 1.3.6.1.4.1.20044.18.2.2.2.32.1.5 | Columnpm1004AlmTxBiasHighAlaPortn | read-only | current | Client SFP Bias High :Alarm indicating that the SFP laser bias current of port is higher than the threshold value written in the SFP EEPROM <Condtype> TX_BIAS_… |
| 1.3.6.1.4.1.20044.18.2.2.2.32.1.6 | Columnpm1004AlmVccLowAlaPortn | read-only | current | Client SFP Power Supply Low :Alarm indicating that the SFP power supply of port is lower than the threshold value written in the SFP EEPROM <Condtype> VCC_LOW_… |
| 1.3.6.1.4.1.20044.18.2.2.2.32.1.7 | Columnpm1004AlmVccHighAlaPortn | read-only | current | Client SFP Power Supply High :Alarm indicating that the SFP power supply of port is higher than the threshold value written in the SFP EEPROM <Condtype> VCC_HI… |
| 1.3.6.1.4.1.20044.18.2.2.2.32.1.8 | Columnpm1004AlmTempLowAlaPortn | read-only | current | Client SFP Temp Low :Alarm indicating that the SFP temperature of port is lower than the threshold value written in the SFP EEPROM <Condtype> TEMP_LOW_ALA_1 <P… |
| 1.3.6.1.4.1.20044.18.2.2.2.32.1.9 | Columnpm1004AlmTempHighAlaPortn | read-only | current | Client SFP Temp High :Alarm indicating that the SFP temperature of port is higher than the threshold value written in the SFP EEPROM <Condtype> TEMP_HIGH_ALA_1… |
| 1.3.6.1.4.1.20044.18.2.2.2.32.1.16 | Columnpm1004AlmRxPwrLowAlaPortn | read-only | current | Client SFP Rx Power Low :Alarm indicating that the SFP input power of port is lower than the threshold value written in the SFP EEPROM <Condtype> RX_PWR_LOW_AL… |
| 1.3.6.1.4.1.20044.18.2.2.2.32.1.17 | Columnpm1004AlmRxPwrHighAlaPortn | read-only | current | Client SFP Rx Power High :Alarm indicating that the SFP input power of port is higher than the threshold value written in the SFP EEPROM <Condtype> RX_PWR_HIGH… |
| 1.3.6.1.4.1.20044.18.2.2.3 | Nodepm1004AlmClientCrit | |||
| 1.3.6.1.4.1.20044.18.2.2.3.8 | Tablepm1004AlmsynthAlmPortTable | not-accessible | current | List of pm1004AlmsynthAlmPort Article |
| 1.3.6.1.4.1.20044.18.2.2.3.8.1 | Rowpm1004AlmsynthAlmPortEntry | not-accessible | current | Row definition for the pm1004AlmsynthAlmPort table |
| 1.3.6.1.4.1.20044.18.2.2.3.8.1.1 | Columnpm1004AlmsynthAlmPortIndex | read-only | current | Index definition for the pm1004AlmsynthAlmPort table |
| 1.3.6.1.4.1.20044.18.2.2.3.8.1.2 | Columnpm1004AlmSfpAbsentPortn | read-only | current | Client SFP Absent :This OID indicates that the SFP module is not present in the client port. <Help> This alarm indicates if the client transceiver is present. … |
| 1.3.6.1.4.1.20044.18.2.2.3.8.1.3 | Columnpm1004AlmDdmAbsentPortn | read-only | current | DDM Supported On Client SFP :This OID indicates that the Client SFP module supports the Digital Diagnostic Monitoring function <Help> This status indicates if … |
| 1.3.6.1.4.1.20044.18.2.2.3.8.1.5 | Columnpm1004AlmHwFailAccPortn | read-only | current | Client HW Fail :This OID indicates a failure on client port, most probably caused by a HW issue. <Condtype> HW_FAIL_ACC_1 <Probcause> equipmentMalfunction (16)… |
| 1.3.6.1.4.1.20044.18.2.2.3.8.1.6 | Columnpm1004AlmDwLsdPortn | read-only | current | Client SFP Laser Shutdown :This OID indicates the Client SFP transmitter output is ON. <Help> This status indicates if the client transceiver laser is ON or OF… |
| 1.3.6.1.4.1.20044.18.2.2.3.8.1.7 | Columnpm1004AlmClientLocalOosPortn | read-only | current | Local Client Port In Service :This OID indicates that the local Client port is In Service (1) or Out of Service (2) <Help> This status indicates if the local c… |
| 1.3.6.1.4.1.20044.18.2.2.3.8.1.8 | Columnpm1004AlmClientRemoteOosPortn | read-only | current | Remote Client Port In Service :This OID indicates that the remote Client port is In Service (1) or Out of Service (2) <Help> This status indicates if the remot… |
| 1.3.6.1.4.1.20044.18.2.2.3.8.1.9 | Columnpm1004AlmDwCaisPortn | read-only | current | Client AIS Inserted :This OID indicates a CAIS has been inserted on the output client port. <Help> This status indicates if a Client Alarm Indication Signal is… |
| 1.3.6.1.4.1.20044.18.2.2.3.8.1.10 | Columnpm1004AlmSfpDdmWarningPortn | read-only | current | Warning On Client SFP DDM :This OID indicates a warning is being received from the Client SFP DDM <Help> This alarm indicates if a DDM Warning has been detecte… |
| 1.3.6.1.4.1.20044.18.2.2.3.8.1.11 | Columnpm1004AlmSfpDdmAlmPortn | read-only | current | Alarm On Client SFP DDM :This OID indicates an alarm is being received from the Client SFP DDM <Help> This alarm indicates if a DDM Alarm has been detected on … |
| 1.3.6.1.4.1.20044.18.2.2.3.8.1.13 | Columnpm1004AlmFailAccPortn | read-only | current | Client Access Fail :This OID indicates a failure on the Client port <Condtype> FAIL_ACC_1 <Probcause> equipmentMalfunction (16) <Alarmtype> synthesisAlarm (12)… |
| 1.3.6.1.4.1.20044.18.2.2.3.8.1.17 | Columnpm1004AlmUpCsfPortn | read-only | current | Client Signal Fail Inserted :This OID indicates a CSF has been inserted in the upstream client port. <Help> This status indicates if a Client Signal Fail is cu… |
| 1.3.6.1.4.1.20044.18.2.2.3.16 | Tablepm1004AlmaccessioAlmTable | not-accessible | current | List of pm1004AlmaccessioAlm Articl e |
| 1.3.6.1.4.1.20044.18.2.2.3.16.1 | Rowpm1004AlmaccessioAlmEntry | not-accessible | current | Row definition for the pm1004AlmaccessioAlm table |
| 1.3.6.1.4.1.20044.18.2.2.3.16.1.1 | Columnpm1004AlmaccessioAlmIndex | read-only | current | Index definition for the pm1004AlmaccessioAlm table |
| 1.3.6.1.4.1.20044.18.2.2.3.16.1.2 | Columnpm1004AlmDwLasFailPortn | read-only | current | Client SFP Tx Failed :This OID indicates that the transmitter fails for the SFP plugged into the client port (this alarm reports the transmitter failure alarm … |
| 1.3.6.1.4.1.20044.18.2.2.3.16.1.5 | Columnpm1004AlmUpLosPortn | read-only | current | Client Input Loss Of Signal :This OID indicates that no signal is present on the SFP of the client port <Help> This alarm indicates if an optical signal is det… |
| 1.3.6.1.4.1.20044.18.2.2.3.72 | Tablepm1004AlmmapperDeAlmTable | not-accessible | current | List of pm1004AlmmapperDeAlm Articl e |
| 1.3.6.1.4.1.20044.18.2.2.3.72.1 | Rowpm1004AlmmapperDeAlmEntry | not-accessible | current | Row definition for the pm1004AlmmapperDeAlm table |
| 1.3.6.1.4.1.20044.18.2.2.3.72.1.1 | Columnpm1004AlmmapperDeAlmIndex | read-only | current | Index definition for the pm1004AlmmapperDeAlm table |
| 1.3.6.1.4.1.20044.18.2.2.3.72.1.2 | Columnpm1004AlmUpAccOosPortn | read-only | current | Client Loss Of Frame :This OID indicates the upstream client input port is in Loss of Frame condition <Help> This alarm indicates if there is a Loss of Frame i… |
| 1.3.6.1.4.1.20044.18.2.2.3.72.1.11 | Columnpm1004AlmUpBufferOvlPortn | read-only | current | Client Upstream Buffer Overload :This OID indicates that the rate adaptation buffer for client port is in overload. <Help> This alarm indicates if there is a u… |
| 1.3.6.1.4.1.20044.18.2.2.3.72.1.12 | Columnpm1004AlmDwCsfDetPortn | read-only | current | Client Signal Fail Detected :This OID indicates that a CSF has been detected on client port in the downstream direction <Help> This alarm indicates if a Client… |
| 1.3.6.1.4.1.20044.18.2.2.3.72.1.15 | Columnpm1004AlmDwBufferOvlPortn | read-only | current | Client Downstream Buffer Overload :This OID indicates that the de-mapper buffer for client port is in overload. <Help> This alarm indicates if there is a downs… |
| 1.3.6.1.4.1.20044.18.2.2.3.104 | Tablepm1004AlmaccessioSdhAlarmTable | not-accessible | current | List of pm1004AlmaccessioSdhAlarm Article |
| 1.3.6.1.4.1.20044.18.2.2.3.104.1 | Rowpm1004AlmaccessioSdhAlarmEntry | not-accessible | current | Row definition for the pm1004AlmaccessioSdhAlarm table |
| 1.3.6.1.4.1.20044.18.2.2.3.104.1.1 | Columnpm1004AlmaccessioSdhAlarmIndex | read-only | current | Index definition for the pm1004AlmaccessioSdhAlarm table |
| 1.3.6.1.4.1.20044.18.2.2.3.104.1.3 | Columnpm1004AlmFifoErrPortn | read-only | current | Client Transceiver Fifo Error :This OID indicates that an error has been detected in the FIFO of the client transceiver <Condtype> FIFO_ERR_1 <Probcause> trans… |
| 1.3.6.1.4.1.20044.18.2.2.3.104.1.4 | Columnpm1004AlmRxLossOfLockPortn | read-only | current | Client Rx Clock Lock Error :This OID indicates the recovered receive clock of the client transceiver is not locked <Condtype> RX_LOSS_OF_LOCK_1 <Probcause> rec… |
| 1.3.6.1.4.1.20044.18.2.2.3.104.1.5 | Columnpm1004AlmTxLossOfLockPortn | read-only | current | Client Tx Clock Lock Error :This OID indicates that the transmit clock of the client transceiver is not locke <Condtype> TX_LOSS_OF_LOCK_1 <Probcause> transmit… |
| 1.3.6.1.4.1.20044.18.2.2.3.104.1.6 | Columnpm1004AlmClientAisDetPortn | read-only | current | Client MS-AIS :This OID indicates that a MS-AIS has been detected on the client input stream <Help> This alarm indicates if there is a MS-AIS/L-AIS is detected… |
| 1.3.6.1.4.1.20044.18.2.2.3.104.1.7 | Columnpm1004AlmClientRdiDetPortn | read-only | current | Client MS-RDI :This OID indicates that a MS-RDI has been detected on the client input stream <Help> This alarm indicates if there is a MS-RDI/L-RDI is detected… |
| 1.3.6.1.4.1.20044.18.2.2.3.104.1.8 | Columnpm1004AlmClientOofPortn | read-only | current | Client Out Of Frame :This OID indicates that an Out Of Frame condition has been detected on the OC-48/STM-16 client input stream <Help> This alarm indicates if… |
| 1.3.6.1.4.1.20044.18.2.3 | Nodepm1004AlmLine | |||
| 1.3.6.1.4.1.20044.18.2.3.1 | Nodepm1004AlmLineNurg | |||
| 1.3.6.1.4.1.20044.18.2.3.1.209 | Tablepm1004AlmlineXfp1WarningsTable | not-accessible | current | List of pm1004AlmlineXfp1Warnings Article |
| 1.3.6.1.4.1.20044.18.2.3.1.209.1 | Rowpm1004AlmlineXfp1WarningsEntry | not-accessible | current | Row definition for the pm1004AlmlineXfp1Warnings table |
| 1.3.6.1.4.1.20044.18.2.3.1.209.1.1 | Columnpm1004AlmlineXfp1WarningsIndex | read-only | current | Index definition for the pm1004AlmlineXfp1Warnings table |
| 1.3.6.1.4.1.20044.18.2.3.1.209.1.2 | Columnpm1004AlmTxPowerLowWarningPortn | read-only | current | Line Optical Tx Power Low Warning :Warning indicating that the XFP/OTX transmitter transmitter output power is lower than the threshold value written in the XF… |
| 1.3.6.1.4.1.20044.18.2.3.1.209.1.3 | Columnpm1004AlmTxPowerHighWarningPortn | read-only | current | Line Optical Tx Power High Warning :Warning indicating that the XFP/OTX transmitter transmitter output power is higher than the threshold value written in the … |
| 1.3.6.1.4.1.20044.18.2.3.1.209.1.4 | Columnpm1004AlmTxBiasLowWarningPortn | read-only | current | Line Transceiver Bias Low Warning :Warning indicating that the XFP/OTX transmitter laser bias current is lower than the threshold value written in the XFP/OTX … |
| 1.3.6.1.4.1.20044.18.2.3.1.209.1.5 | Columnpm1004AlmTxBiasHighWarningPortn | read-only | current | Line Transceiver Bias High Warning :Warning indicating that the XFP/OTX transmitter laser bias current is higher than the threshold value written in the XFP EE… |
| 1.3.6.1.4.1.20044.18.2.3.1.209.1.8 | Columnpm1004AlmTempLowWarningPortn | read-only | current | Line Transceiver Temp Low Warning :Warning indicating that the XFP/OTX temperature is lower than the threshold value written in the XFP/OTX EEPROM <Condtype> T… |
| 1.3.6.1.4.1.20044.18.2.3.1.209.1.9 | Columnpm1004AlmTempHighWarningPortn | read-only | current | Line Transceiver Temp High Warning :Warning indicating that the XFP/OTX temperature is higher than the threshold value written in the XFP EEPROM <Condtype> TEM… |
| 1.3.6.1.4.1.20044.18.2.3.1.209.1.16 | Columnpm1004AlmRxPowerLowWarningPortn | read-only | current | Line Optical Rx Power Low Warning :Warning indicating that the XFP received optical power is lower than the threshold value written in the XFP EEPROM <Condtype… |
| 1.3.6.1.4.1.20044.18.2.3.1.209.1.17 | Columnpm1004AlmRxPowerHighWarningPortn | read-only | current | Line Optical Rx Power High Warning :Warning indicating that the XFP received optical power is higher than the threshold value written in the XFP EEPROM <Condty… |
| 1.3.6.1.4.1.20044.18.2.3.1.225 | Tablepm1004AlmlineOtx1TlhWarningsTable | not-accessible | current | List of pm1004AlmlineOtx1TlhWarnings Article |
| 1.3.6.1.4.1.20044.18.2.3.1.225.1 | Rowpm1004AlmlineOtx1TlhWarningsEntry | not-accessible | current | Row definition for the pm1004AlmlineOtx1TlhWarnings table |
| 1.3.6.1.4.1.20044.18.2.3.1.225.1.1 | Columnpm1004AlmlineOtx1TlhWarningsIndex | read-only | current | Index definition for the pm1004AlmlineOtx1TlhWarnings table |
| 1.3.6.1.4.1.20044.18.2.3.1.225.1.6 | Columnpm1004AlmLineModulatorAgingHighWarningPortn | read-only | current | Line Modulator Aging High Warning :Warning indicating the Line OTX TLH modulator aging is higher than the threshold written in the EEPROM <Condtype> LINE_MODUL… |
| 1.3.6.1.4.1.20044.18.2.3.1.225.1.7 | Columnpm1004AlmLineAgingHighWarningPortn | read-only | current | Line OTX TLH Aging High Warning :Warning indicating the Line OTX TLH aging is higher than the threshold written in the EEPROM <Condtype> LINE_AGING_HIGH_WARNIN… |
| 1.3.6.1.4.1.20044.18.2.3.1.225.1.13 | Columnpm1004AlmLineFreqDevHighWarningPortn | read-only | current | Line Freq. Deviation High Warning :Warning indicating the Line OTX TLH frequency deviation is higher than the threshold written in the EEPROM <Condtype> LINE_F… |
| 1.3.6.1.4.1.20044.18.2.3.1.225.1.15 | Columnpm1004AlmLineLaserTempHighWarningPortn | read-only | current | Line Laser Temp. High Warning :Warning indicating the Line OTX TLH laser temperature is higher than the threshold written in the EEPROM <Condtype> LINE_LASER_T… |
| 1.3.6.1.4.1.20044.18.2.3.2 | Nodepm1004AlmLineUrg | |||
| 1.3.6.1.4.1.20044.18.2.3.2.129 | Tablepm1004AlmdfrmBerTable | not-accessible | current | List of pm1004AlmdfrmBer Articl e |
| 1.3.6.1.4.1.20044.18.2.3.2.129.1 | Rowpm1004AlmdfrmBerEntry | not-accessible | current | Row definition for the pm1004AlmdfrmBer table |
| 1.3.6.1.4.1.20044.18.2.3.2.129.1.1 | Columnpm1004AlmdfrmBerIndex | read-only | current | Index definition for the pm1004AlmdfrmBer table |
| 1.3.6.1.4.1.20044.18.2.3.2.129.1.2 | Columnpm1004AlmLineSignalDegradePortn | read-only | current | Custom Line Signal Degrade :This OID indicates that the line input signal is DEGRADE. The assertion hysteresis can customized by the host <Condtype> LINE_SIGNA… |
| 1.3.6.1.4.1.20044.18.2.3.2.129.1.3 | Columnpm1004AlmLineSignalFailPortn | read-only | current | Custom Line Signal Fail :This OID indicates that the line input signal is FAIL. The assertion hysteresis can be customized by the host <Condtype> LINE_SIGNAL_F… |
| 1.3.6.1.4.1.20044.18.2.3.2.129.1.6 | Columnpm1004AlmLineDegradePortn | read-only | current | Fixed Line Signal Degrade :This OID indicates that the line input signal is DEGRADE. The assetion hysteresis is fixed to 10-8 (assertion) and 10-9 (de-assertio… |
| 1.3.6.1.4.1.20044.18.2.3.2.208 | Tablepm1004AlmlineXfp1AlarmTable | not-accessible | current | List of pm1004AlmlineXfp1Alarm Article |
| 1.3.6.1.4.1.20044.18.2.3.2.208.1 | Rowpm1004AlmlineXfp1AlarmEntry | not-accessible | current | Row definition for the pm1004AlmlineXfp1Alarm table |
| 1.3.6.1.4.1.20044.18.2.3.2.208.1.1 | Columnpm1004AlmlineXfp1AlarmIndex | read-only | current | Index definition for the pm1004AlmlineXfp1Alarm table |
| 1.3.6.1.4.1.20044.18.2.3.2.208.1.2 | Columnpm1004AlmTxPowerLowAlarmPortn | read-only | current | Line Optical Tx Power Low :Alarm indicating that the XFP/OTX transmitter transmitter output power is lower than the threshold value written in the XFP/OTX EEPR… |
| 1.3.6.1.4.1.20044.18.2.3.2.208.1.3 | Columnpm1004AlmTxPowerHighAlarmPortn | read-only | current | Line Optical Tx Power High :Alarm indicating that the XFP/OTX transmitter transmitter output power is higher than the threshold value written in the XFP EEPROM… |
| 1.3.6.1.4.1.20044.18.2.3.2.208.1.4 | Columnpm1004AlmTxBiasLowAlarmPortn | read-only | current | Line Transceiver Bias Low :Alarm indicating that the XFP/OTX transmitter laser bias current is lower than the threshold value written in the XFP/OTX EEPROM <Co… |
| 1.3.6.1.4.1.20044.18.2.3.2.208.1.5 | Columnpm1004AlmTxBiasHighAlarmPortn | read-only | current | Line Transceiver Bias High :Alarm indicating that the XFP/OTX transmitter laser bias current is higher than the threshold value written in the XFP EEPROM <Cond… |
| 1.3.6.1.4.1.20044.18.2.3.2.208.1.8 | Columnpm1004AlmTempLowAlarmPortn | read-only | current | Line Transceiver Temp Low :Alarm indicating that the XFP/OTX temperature is lower than the threshold value written in the XFP/OTX EEPROM <Condtype> TEMP_LOW_AL… |
| 1.3.6.1.4.1.20044.18.2.3.2.208.1.9 | Columnpm1004AlmTempHighAlarmPortn | read-only | current | Line Transceiver Temp High :Alarm indicating that the XFP/OTX temperature is higher than the threshold value written in the XFP EEPROM <Condtype> TEMP_HIGH_ALA… |
| 1.3.6.1.4.1.20044.18.2.3.2.208.1.16 | Columnpm1004AlmRxPowerLowAlarmPortn | read-only | current | Line Optical Rx Power Low :Alarm indicating that the XFP received optical power is lower than the threshold value written in the XFP EEPROM <Condtype> RX_POWER… |
| 1.3.6.1.4.1.20044.18.2.3.2.208.1.17 | Columnpm1004AlmRxPowerHighAlarmPortn | read-only | current | Line Optical Rx Power High :Alarm indicating that the XFP received optical power is higher than the threshold value written in the XFP EEPROM <Condtype> RX_POW… |
| 1.3.6.1.4.1.20044.18.2.3.2.212 | Tablepm1004AlmlineXfp1SupplyAlarmTable | not-accessible | current | List of pm1004AlmlineXfp1SupplyAlarm Article |
| 1.3.6.1.4.1.20044.18.2.3.2.212.1 | Rowpm1004AlmlineXfp1SupplyAlarmEntry | not-accessible | current | Row definition for the pm1004AlmlineXfp1SupplyAlarm table |
| 1.3.6.1.4.1.20044.18.2.3.2.212.1.1 | Columnpm1004AlmlineXfp1SupplyAlarmIndex | read-only | current | Index definition for the pm1004AlmlineXfp1SupplyAlarm table |
| 1.3.6.1.4.1.20044.18.2.3.2.212.1.2 | Columnpm1004AlmVee5LowAlarmPortn | read-only | current | VEE5 Power Supply Low :Alarm indicating the XFP/OTX VEE5 power supply is lower than the threshold written in the EEPROM <Condtype> VEE5_LOW_ALARM_1 <Probcause>… |
| 1.3.6.1.4.1.20044.18.2.3.2.212.1.3 | Columnpm1004AlmVee5HighAlarmPortn | read-only | current | VEE5 Power Supply High :Alarm indicating the XFP/OTX VEE5 power supply is higher than the threshold written in the EEPROM <Condtype> VEE5_HIGH_ALARM_1 <Probcau… |
| 1.3.6.1.4.1.20044.18.2.3.2.212.1.4 | Columnpm1004AlmVcc2LowAlarmPortn | read-only | current | VCC2 Power Supply Low :Alarm indicating the XFP/OTX VCC2 power supply is lower than the threshold written in the EEPROM <Condtype> VCC2_LOW_ALARM_1 <Probcause>… |
| 1.3.6.1.4.1.20044.18.2.3.2.212.1.5 | Columnpm1004AlmVcc2HighAlarmPortn | read-only | current | VCC2 Power Supply High :Alarm indicating the XFP/OTX VCC2 power supply is higher than the threshold written in the EEPROM <Condtype> VCC2_HIGH_ALARM_1 <Probcau… |
| 1.3.6.1.4.1.20044.18.2.3.2.212.1.6 | Columnpm1004AlmVcc3LowAlarmPortn | read-only | current | VCC3 Power Supply Low :Alarm indicating the XFP/OTX VCC3 power supply is lower than the threshold written in the EEPROM <Condtype> VCC3_LOW_ALARM_1 <Probcause>… |
| 1.3.6.1.4.1.20044.18.2.3.2.212.1.7 | Columnpm1004AlmVcc3HighAlarmPortn | read-only | current | VCC3 Power Supply High :Alarm indicating the XFP/OTX VCC3 power supply is higher than the threshold written in the EEPROM <Condtype> VCC3_HIGH_ALARM_1 <Probcau… |
| 1.3.6.1.4.1.20044.18.2.3.2.212.1.8 | Columnpm1004AlmVcc5LowAlarmPortn | read-only | current | VCC5 Power Supply Low :Alarm indicating the XFP/OTX VCC5 power supply is lower than the threshold written in the EEPROM <Condtype> VCC5_LOW_ALARM_1 <Probcause>… |
| 1.3.6.1.4.1.20044.18.2.3.2.212.1.9 | Columnpm1004AlmVcc5HighAlarmPortn | read-only | current | VCC5 Power Supply High :Alarm indicating the XFP/OTX VCC5 power supply is higher than the threshold written in the EEPROM <Condtype> VCC5_HIGH_ALARM_1 <Probcau… |
| 1.3.6.1.4.1.20044.18.2.3.2.212.1.10 | Columnpm1004AlmVee5LowWarningPortn | read-only | current | VEE5 Power Supply Low Warning :Warning indicating the XFP/OTX VEE5 power supply is lower than the threshold written in the EEPROM <Condtype> VEE5_LOW_WARNING_1… |
| 1.3.6.1.4.1.20044.18.2.3.2.212.1.11 | Columnpm1004AlmVee5HighWarningPortn | read-only | current | VEE5 Power Supply High Warning :Warning indicating the XFP/OTX VEE5 power supply is higher than the threshold written in the EEPROM <Condtype> VEE5_HIGH_WARNIN… |
| 1.3.6.1.4.1.20044.18.2.3.2.212.1.12 | Columnpm1004AlmVcc2LowWarningPortn | read-only | current | VCC2 Power Supply Low Warning :Warning indicating the XFP/OTX VCC2 power supply is lower than the threshold written in the EEPROM <Condtype> VCC2_LOW_WARNING_1… |
| 1.3.6.1.4.1.20044.18.2.3.2.212.1.13 | Columnpm1004AlmVcc2HighWarningPortn | read-only | current | VCC2 Power Supply High Warning :Warning indicating the XFP/OTX VCC2 power supply is higher than the threshold written in the EEPROM <Condtype> VCC2_HIGH_WARNIN… |
| 1.3.6.1.4.1.20044.18.2.3.2.212.1.14 | Columnpm1004AlmVcc3LowWarningPortn | read-only | current | VCC3 Power Supply Low Warning :Warning indicating the XFP/OTX VCC3 power supply is lower than the threshold written in the EEPROM <Condtype> VCC3_LOW_WARNING_1… |
| 1.3.6.1.4.1.20044.18.2.3.2.212.1.15 | Columnpm1004AlmVcc3HighWarningPortn | read-only | current | VCC3 Power Supply High Warning :Warning indicating the XFP/OTX VCC3 power supply is higher than the threshold written in the EEPROM <Condtype> VCC3_HIGH_WARNIN… |
| 1.3.6.1.4.1.20044.18.2.3.2.212.1.16 | Columnpm1004AlmVcc5LowWarningPortn | read-only | current | VCC5 Power Supply Low Warning :Warning indicating the XFP/OTX VCC5 power supply is lower than the threshold written in the EEPROM <Condtype> VCC5_LOW_WARNING_1… |
| 1.3.6.1.4.1.20044.18.2.3.2.212.1.17 | Columnpm1004AlmVcc5HighWarningPortn | read-only | current | VCC5 Power Supply High Warning :Warning indicating the XFP/OTX VCC5 power supply is higher than the threshold written in the EEPROM <Condtype> VCC5_HIGH_WARNIN… |
| 1.3.6.1.4.1.20044.18.2.3.2.224 | Tablepm1004AlmlineOtx1TlhAlarmsTable | not-accessible | current | List of pm1004AlmlineOtx1TlhAlarms Article |
| 1.3.6.1.4.1.20044.18.2.3.2.224.1 | Rowpm1004AlmlineOtx1TlhAlarmsEntry | not-accessible | current | Row definition for the pm1004AlmlineOtx1TlhAlarms table |
| 1.3.6.1.4.1.20044.18.2.3.2.224.1.1 | Columnpm1004AlmlineOtx1TlhAlarmsIndex | read-only | current | Index definition for the pm1004AlmlineOtx1TlhAlarms table |
| 1.3.6.1.4.1.20044.18.2.3.2.224.1.6 | Columnpm1004AlmLineModulatorAgingHighAlaPortn | read-only | current | Line Modulator Aging High Alarm :Alarm indicating the Line OTX TLH modulator aging is higher than the threshold written in the EEPROM <Condtype> LINE_MODULATOR… |
| 1.3.6.1.4.1.20044.18.2.3.2.224.1.7 | Columnpm1004AlmLineAgingHighAlaPortn | read-only | current | Line OTX TLH Aging High Alarm :Alarm indicating the Line OTX TLH aging is higher than the threshold written in the EEPROM <Condtype> LINE_AGING_HIGH_ALA_1 <Pro… |
| 1.3.6.1.4.1.20044.18.2.3.2.224.1.10 | Columnpm1004AlmLineCdrNotReadyPortn | read-only | current | CDR Not Ready :This OID indicates the Clock Data Recovery unit is not yet initialized. <Help> This alarm indicates the Clock Data Recovery unit is not yet init… |
| 1.3.6.1.4.1.20044.18.2.3.2.224.1.13 | Columnpm1004AlmLineFreqDevHighAlaPortn | read-only | current | Line Freq. Deviation High Alarm :Alarm indicating the Line OTX TLH frequency deviation is higher than the threshold written in the EEPROM <Condtype> LINE_FREQ_… |
| 1.3.6.1.4.1.20044.18.2.3.2.224.1.15 | Columnpm1004AlmLineLaserTempHighAlaPortn | read-only | current | Line Laser Temp. High Alarm :Alarm indicating the Line OTX TLH laser temperature is higher than the threshold written in the EEPROM <Condtype> LINE_LASER_TEMP_… |
| 1.3.6.1.4.1.20044.18.2.3.3 | Nodepm1004AlmLineCrit | |||
| 1.3.6.1.4.1.20044.18.2.3.3.7 | Tablepm1004AlmsynthAlmLineTable | not-accessible | current | List of pm1004AlmsynthAlmLine Article |
| 1.3.6.1.4.1.20044.18.2.3.3.7.1 | Rowpm1004AlmsynthAlmLineEntry | not-accessible | current | Row definition for the pm1004AlmsynthAlmLine table |
| 1.3.6.1.4.1.20044.18.2.3.3.7.1.1 | Columnpm1004AlmsynthAlmLineIndex | read-only | current | Index definition for the pm1004AlmsynthAlmLine table |
| 1.3.6.1.4.1.20044.18.2.3.3.7.1.2 | Columnpm1004AlmXfpAbsentPortn | read-only | current | Line Optical Module Absent :This OID indicates that the line optical interface (XFP or OTX) is not plugged in. <Help> This alarm indicates if the line transcei… |
| 1.3.6.1.4.1.20044.18.2.3.3.7.1.3 | Columnpm1004AlmXfpInitNotComplPortn | read-only | current | Line Optical Module Ready :This OID indicates that the optical interface (XFP or OTX) is not operational. <Help> This status indicates if the line transceiver … |
| 1.3.6.1.4.1.20044.18.2.3.3.7.1.5 | Columnpm1004AlmLineHwFailPortn | read-only | current | Line Port HW Failure :This OID indicates a failure on line port, most probably caused by a HW issue <Condtype> LINE_HW_FAIL <Probcause> equipmentMalfunction (1… |
| 1.3.6.1.4.1.20044.18.2.3.3.7.1.6 | Columnpm1004AlmXfpTxOffPortn | read-only | current | Line Optical Module Laser Shutdown :This OID indicates the line optical output power is on <Help> This status indicates if the line transceiver laser is ON or … |
| 1.3.6.1.4.1.20044.18.2.3.3.7.1.7 | Columnpm1004AlmLineLocalOosPortn | read-only | current | Line Port In Service :This OID indicates that the Line port is In Service (1) of Out or Service (2) <Help> This status indicates if the line port is in service… |
| 1.3.6.1.4.1.20044.18.2.3.3.7.1.9 | Columnpm1004AlmUpRdiInsPortn | read-only | current | SM-BDI Inserted On Line :This OID indicates an upstream SM-BDI has been inserted in the outgoing G709 signal. <Help> This status indicates if a SM-BDI is curre… |
| 1.3.6.1.4.1.20044.18.2.3.3.7.1.10 | Columnpm1004AlmLineDdmWarningPortn | read-only | current | Warning On Line Optical Module DDM :This OID indicates a warning is present coming out of Line optical interface DDM <Help> This status indicates if a MS-RDI/L… |
| 1.3.6.1.4.1.20044.18.2.3.3.7.1.11 | Columnpm1004AlmLineDdmAlmPortn | read-only | current | Alarm On Line Optical Module DDM :This OID indicates an alarm is present coming out of Line optical interface DDM <Help> This alarm indicates if a DDM Warning … |
| 1.3.6.1.4.1.20044.18.2.3.3.7.1.13 | Columnpm1004AlmLineFailPortn | read-only | current | Line Port Failure :This OID indicates a failure on the line port <Condtype> LINE_FAIL <Probcause> equipmentMalfunction (16) <Alarmtype> synthesisAlarm (12) <Po… |
| 1.3.6.1.4.1.20044.18.2.3.3.7.1.17 | Columnpm1004AlmLineActivePortn | read-only | current | Line Active :This bit indicates the line #n is active on receive side <Help> This status indicates whether the line is active or standby. <Condtype> LINE_ACTIV… |
| 1.3.6.1.4.1.20044.18.2.3.3.128 | Tablepm1004AlmdfrmAlmTable | not-accessible | current | List of pm1004AlmdfrmAlm Articl e |
| 1.3.6.1.4.1.20044.18.2.3.3.128.1 | Rowpm1004AlmdfrmAlmEntry | not-accessible | current | Row definition for the pm1004AlmdfrmAlm table |
| 1.3.6.1.4.1.20044.18.2.3.3.128.1.1 | Columnpm1004AlmdfrmAlmIndex | read-only | current | Index definition for the pm1004AlmdfrmAlm table |
| 1.3.6.1.4.1.20044.18.2.3.3.128.1.2 | Columnpm1004AlmDwAisDetPortn | read-only | current | ODU2 AIS Detected On Line Input :This OID indicates that an ODU2-AIS has been detected on G709 input signal <Help> This alarm indicates if there is a ODU2 AIS … |
| 1.3.6.1.4.1.20044.18.2.3.3.128.1.3 | Columnpm1004AlmDwRdiDetPortn | read-only | current | OTU2 SM-BDI Detected On Line Input :This OID indicates that an SM-BDI has been detected on G709 input signal <Help> This alarm indicates if there is a SM-BDI i… |
| 1.3.6.1.4.1.20044.18.2.3.3.128.1.4 | Columnpm1004AlmDwOofPortn | read-only | current | Line Out Of Frame :This OID indicates that an Out Of Frame has been detected on G709 input signal <Help> This alarm indicates if there is a G,709 Out of Frame … |
| 1.3.6.1.4.1.20044.18.2.3.3.128.1.5 | Columnpm1004AlmDwLofPortn | read-only | current | Line Loss Of Frame :This OID indicates that a Loss Of Frame has been detected on G709 input signal <Help> This alarm indicates if there is a G,709 Loss of Fram… |
| 1.3.6.1.4.1.20044.18.2.3.3.133 | Tablepm1004AlmlineSyncAlarmsTable | not-accessible | current | List of pm1004AlmlineSyncAlarms Article |
| 1.3.6.1.4.1.20044.18.2.3.3.133.1 | Rowpm1004AlmlineSyncAlarmsEntry | not-accessible | current | Row definition for the pm1004AlmlineSyncAlarms table |
| 1.3.6.1.4.1.20044.18.2.3.3.133.1.1 | Columnpm1004AlmlineSyncAlarmsIndex | read-only | current | Index definition for the pm1004AlmlineSyncAlarms table |
| 1.3.6.1.4.1.20044.18.2.3.3.133.1.13 | Columnpm1004AlmDwLockerrPortn | read-only | current | Downstream Clock Lock Error :This OID indicates that the deserializer input 10 Gb/s clock recovery is not locked. <Condtype> DW_LOCKERR <Probcause> receiveFail… |
| 1.3.6.1.4.1.20044.18.2.3.3.133.1.14 | Columnpm1004AlmUpLockerrPortn | read-only | current | Upstream Clock Lock Error :This OID indicates that the serializer output 10 Gb/s clock multiplier unit is not locked. <Condtype> UP_LOCKERR <Probcause> receive… |
| 1.3.6.1.4.1.20044.18.2.3.3.133.1.17 | Columnpm1004AlmDwLosPortn | read-only | current | Line Input Loss Of Signal :This OID indicates a loss of signal on the 10 Gb/s input. <Help> This alarm indicates if an optical signal is detected on the line t… |
| 1.3.6.1.4.1.20044.18.2.3.3.211 | Tablepm1004AlmlineXfp1AlarmsTable | not-accessible | current | List of pm1004AlmlineXfp1Alarms Article |
| 1.3.6.1.4.1.20044.18.2.3.3.211.1 | Rowpm1004AlmlineXfp1AlarmsEntry | not-accessible | current | Row definition for the pm1004AlmlineXfp1Alarms table |
| 1.3.6.1.4.1.20044.18.2.3.3.211.1.1 | Columnpm1004AlmlineXfp1AlarmsIndex | read-only | current | Index definition for the pm1004AlmlineXfp1Alarms table |
| 1.3.6.1.4.1.20044.18.2.3.3.211.1.3 | Columnpm1004AlmModNrPortn | read-only | current | Line Optical Module Not Ready :This OID indicates that the module is unable to determine correct data. <Help> This alarm indicates if the line transceiver is r… |
| 1.3.6.1.4.1.20044.18.2.3.3.211.1.4 | Columnpm1004AlmRxCdrNotLockedPortn | read-only | current | Line Optical Rx CDR Unlocked :This OID indicates that a loss of lock on the receiving side CDR has been detected <Help> This alarm indicates if the Rx CDR is l… |
| 1.3.6.1.4.1.20044.18.2.3.3.211.1.6 | Columnpm1004AlmRxNrPortn | read-only | current | Line Optical Rx Not Ready :This OID indicates that a condition has arisen leading to invalid data on the receiving side. <Help> This alarm indicates if the Rx … |
| 1.3.6.1.4.1.20044.18.2.3.3.211.1.7 | Columnpm1004AlmTxCdrNotLockedPortn | read-only | current | Line Optical Tx CDR Unlocked :This OID indicates a loss of lock on the transmitting side CDR has been detected. <Help> This alarm indicates if the Tx CDR is lo… |
| 1.3.6.1.4.1.20044.18.2.3.3.211.1.8 | Columnpm1004AlmTxFaultPortn | read-only | current | Line Optical Tx Failure :This OID indicates a fault condition on the laser detected by the safety syste <Help> This alarm indicates if the laser of the line tr… |
| 1.3.6.1.4.1.20044.18.2.3.3.211.1.9 | Columnpm1004AlmTxNrPortn | read-only | current | Line Optical Tx Not Ready :This OID indicates a condition has arisen leading to invalid data on the transmitting side <Help> This alarm indicates if the Tx par… |
| 1.3.6.1.4.1.20044.18.2.3.3.211.1.11 | Columnpm1004AlmChannelNotAcquiredPortn | read-only | current | Line DWDM Channel Not Acquired :This OID indicates the transceiver didn't tune the DWDM Channel succesfully. <Help> This status indicates the transceiver has n… |
| 1.3.6.1.4.1.20044.18.2.3.3.211.1.15 | Columnpm1004AlmWavelengthUnlockedPortn | read-only | current | Line Optical Tx Wavelength Unlocked :This OID indicates that the wavelength error is exceeding the manufacturer tolerance <Help> This alarm indicates if the wa… |
| 1.3.6.1.4.1.20044.18.2.3.3.211.1.16 | Columnpm1004AlmTecFaultPortn | read-only | current | Line Optical Tx Temp Regul Failed :This OID indicates a failure on the TEC module <Help> This alarm indicates if the TEC of the line transceiver is in fail con… |
| 1.3.6.1.4.1.20044.18.2.3.3.211.1.17 | Columnpm1004AlmApdSupplyFaultPortn | read-only | current | Line Rx Photodiode Power Failed :This OID indicates a failure on the APD power supply <Help> This alarm indicates if the APD power supply is in fail condition … |
| 1.3.6.1.4.1.20044.18.3 | Nodepm1004measures | |||
| 1.3.6.1.4.1.20044.18.3.1 | Nodepm1004MesrOther | |||
| 1.3.6.1.4.1.20044.18.3.1.0 | Scalarpm1004Mesrsynth0 | read-only | deprecated | Not Used :This OID gives the unit used on AUX1 measurement of XFP#1 (Unit = ) |
| 1.3.6.1.4.1.20044.18.3.1.1 | Scalarpm1004Mesrsynth1 | read-only | deprecated | Not Used :This OID gives the unit used on AUX2 measurement of XFP#1 (Unit = ) |
| 1.3.6.1.4.1.20044.18.3.2 | Nodepm1004MesrClient | |||
| 1.3.6.1.4.1.20044.18.3.2.16 | Tablepm1004MesrtempMeasTable | not-accessible | current | List of pm1004MesrtempMeas Articl e |
| 1.3.6.1.4.1.20044.18.3.2.16.1 | Rowpm1004MesrtempMeasEntry | not-accessible | current | Row definition for the pm1004MesrtempMeas table |
| 1.3.6.1.4.1.20044.18.3.2.16.1.1 | Columnpm1004MesrtempMeasIndex | read-only | current | Index definition for the pm1004MesrtempMeas table |
| 1.3.6.1.4.1.20044.18.3.2.16.1.2 | Columnpm1004MesrtempMeasPortn | read-only | current | Client SFP Temperature :This OID gives the temperature value of the SFP plugged in port, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/25… |
| 1.3.6.1.4.1.20044.18.3.2.24 | Tablepm1004MesrvoltMeasTable | not-accessible | current | List of pm1004MesrvoltMeas Articl e |
| 1.3.6.1.4.1.20044.18.3.2.24.1 | Rowpm1004MesrvoltMeasEntry | not-accessible | current | Row definition for the pm1004MesrvoltMeas table |
| 1.3.6.1.4.1.20044.18.3.2.24.1.1 | Columnpm1004MesrvoltMeasIndex | read-only | current | Index definition for the pm1004MesrvoltMeas table |
| 1.3.6.1.4.1.20044.18.3.2.24.1.2 | Columnpm1004MesrvoltMeasPortn | read-only | current | Client SFP Power Supply :This OID gives the 3V3 voltage value of the SFP plugged into port, read from the DDM (Digital Diagnostic Monitoring) (Voltage = AV/100… |
| 1.3.6.1.4.1.20044.18.3.2.32 | Tablepm1004MesrbiasMeasTable | not-accessible | current | List of pm1004MesrbiasMeas Articl e |
| 1.3.6.1.4.1.20044.18.3.2.32.1 | Rowpm1004MesrbiasMeasEntry | not-accessible | current | Row definition for the pm1004MesrbiasMeas table |
| 1.3.6.1.4.1.20044.18.3.2.32.1.1 | Columnpm1004MesrbiasMeasIndex | read-only | current | Index definition for the pm1004MesrbiasMeas table |
| 1.3.6.1.4.1.20044.18.3.2.32.1.2 | Columnpm1004MesrbiasMeasPortn | read-only | current | Client SFP Laser Bias :This OID gives the bias value of the SFP plugged into port, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/500) (Unit = mA… |
| 1.3.6.1.4.1.20044.18.3.2.40 | Tablepm1004MesrtxpwrMeasTable | not-accessible | current | List of pm1004MesrtxpwrMeas Articl e |
| 1.3.6.1.4.1.20044.18.3.2.40.1 | Rowpm1004MesrtxpwrMeasEntry | not-accessible | current | Row definition for the pm1004MesrtxpwrMeas table |
| 1.3.6.1.4.1.20044.18.3.2.40.1.1 | Columnpm1004MesrtxpwrMeasIndex | read-only | current | Index definition for the pm1004MesrtxpwrMeas table |
| 1.3.6.1.4.1.20044.18.3.2.40.1.2 | Columnpm1004MesrtxpwrMeasPortn | read-only | current | Client SFP Tx Power :This OID gives the transmit power value of the SFP plugged into port, read from the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV… |
| 1.3.6.1.4.1.20044.18.3.2.48 | Tablepm1004MesrrxpwrMeasTable | not-accessible | current | List of pm1004MesrrxpwrMeas Articl e |
| 1.3.6.1.4.1.20044.18.3.2.48.1 | Rowpm1004MesrrxpwrMeasEntry | not-accessible | current | Row definition for the pm1004MesrrxpwrMeas table |
| 1.3.6.1.4.1.20044.18.3.2.48.1.1 | Columnpm1004MesrrxpwrMeasIndex | read-only | current | Index definition for the pm1004MesrrxpwrMeas table |
| 1.3.6.1.4.1.20044.18.3.2.48.1.2 | Columnpm1004MesrrxpwrMeasPortn | read-only | current | Client SFP Rx Power :This OID gives the receive power value of the SFP plugged into port, read in the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-4… |
| 1.3.6.1.4.1.20044.18.3.3 | Nodepm1004MesrLine | |||
| 1.3.6.1.4.1.20044.18.3.3.208 | Tablepm1004Mesrxfp1LxModTempMeasTable | not-accessible | current | List of pm1004Mesrxfp1LxModTempMeas Article |
| 1.3.6.1.4.1.20044.18.3.3.208.1 | Rowpm1004Mesrxfp1LxModTempMeasEntry | not-accessible | current | Row definition for the pm1004Mesrxfp1LxModTempMeas table |
| 1.3.6.1.4.1.20044.18.3.3.208.1.1 | Columnpm1004Mesrxfp1LxModTempMeasIndex | read-only | current | Index definition for the pm1004Mesrxfp1LxModTempMeas table |
| 1.3.6.1.4.1.20044.18.3.3.208.1.2 | Columnpm1004Mesrxfp1LxModTempMeasPortn | read-only | current | Line Optical Module Temperature :This OID gives the temperature of the XFP or OTX plugged in line, read from the DDM (Digital Diagnostic Monitoring) (Temperatu… |
| 1.3.6.1.4.1.20044.18.3.3.209 | Tablepm1004Mesrxfp1ReservedTable | not-accessible | deprecated | List of pm1004Mesrxfp1Reserved Article |
| 1.3.6.1.4.1.20044.18.3.3.209.1 | Rowpm1004Mesrxfp1ReservedEntry | not-accessible | deprecated | Row definition for the pm1004Mesrxfp1Reserved table |
| 1.3.6.1.4.1.20044.18.3.3.209.1.1 | Columnpm1004Mesrxfp1ReservedIndex | read-only | deprecated | Index definition for the pm1004Mesrxfp1Reserved table |
| 1.3.6.1.4.1.20044.18.3.3.209.1.2 | Columnpm1004Mesrxfp1ReservedPortn | read-only | deprecated | Not Used :Reserved |
| 1.3.6.1.4.1.20044.18.3.3.210 | Tablepm1004Mesrxfp1LoBiasCurrentMeasTable | not-accessible | current | List of pm1004Mesrxfp1LoBiasCurrentMeas Article |
| 1.3.6.1.4.1.20044.18.3.3.210.1 | Rowpm1004Mesrxfp1LoBiasCurrentMeasEntry | not-accessible | current | Row definition for the pm1004Mesrxfp1LoBiasCurrentMeas table |
| 1.3.6.1.4.1.20044.18.3.3.210.1.1 | Columnpm1004Mesrxfp1LoBiasCurrentMeasIndex | read-only | current | Index definition for the pm1004Mesrxfp1LoBiasCurrentMeas table |
| 1.3.6.1.4.1.20044.18.3.3.210.1.2 | Columnpm1004Mesrxfp1LoBiasCurrentMeasPortn | read-only | current | Line Optical Module Laser Bias :This OID gives the bias value of the XFP or OTX plugged in line , read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/… |
| 1.3.6.1.4.1.20044.18.3.3.211 | Tablepm1004Mesrxfp1LoTxPowerMeasTable | not-accessible | current | List of pm1004Mesrxfp1LoTxPowerMeas Article |
| 1.3.6.1.4.1.20044.18.3.3.211.1 | Rowpm1004Mesrxfp1LoTxPowerMeasEntry | not-accessible | current | Row definition for the pm1004Mesrxfp1LoTxPowerMeas table |
| 1.3.6.1.4.1.20044.18.3.3.211.1.1 | Columnpm1004Mesrxfp1LoTxPowerMeasIndex | read-only | current | Index definition for the pm1004Mesrxfp1LoTxPowerMeas table |
| 1.3.6.1.4.1.20044.18.3.3.211.1.2 | Columnpm1004Mesrxfp1LoTxPowerMeasPortn | read-only | current | Line Optical Module Tx Power :This OID gives the transmit power value of the XFP or OTX plugged in line , read from the DDM (Digital Diagnostic Monitoring) (Po… |
| 1.3.6.1.4.1.20044.18.3.3.212 | Tablepm1004Mesrxfp1LiRxPowerMeasTable | not-accessible | current | List of pm1004Mesrxfp1LiRxPowerMeas Article |
| 1.3.6.1.4.1.20044.18.3.3.212.1 | Rowpm1004Mesrxfp1LiRxPowerMeasEntry | not-accessible | current | Row definition for the pm1004Mesrxfp1LiRxPowerMeas table |
| 1.3.6.1.4.1.20044.18.3.3.212.1.1 | Columnpm1004Mesrxfp1LiRxPowerMeasIndex | read-only | current | Index definition for the pm1004Mesrxfp1LiRxPowerMeas table |
| 1.3.6.1.4.1.20044.18.3.3.212.1.2 | Columnpm1004Mesrxfp1LiRxPowerMeasPortn | read-only | current | Line Optical Module Rx Power :This OID gives the receive power value of the XFP or OTX plugged in line , read from the DDM (Digital Diagnostic Monitoring) (Pow… |
| 1.3.6.1.4.1.20044.18.3.3.213 | Tablepm1004Mesrxfp1LxAux1MeasTable | not-accessible | deprecated | List of pm1004Mesrxfp1LxAux1Meas Article |
| 1.3.6.1.4.1.20044.18.3.3.213.1 | Rowpm1004Mesrxfp1LxAux1MeasEntry | not-accessible | deprecated | Row definition for the pm1004Mesrxfp1LxAux1Meas table |
| 1.3.6.1.4.1.20044.18.3.3.213.1.1 | Columnpm1004Mesrxfp1LxAux1MeasIndex | read-only | deprecated | Index definition for the pm1004Mesrxfp1LxAux1Meas table |
| 1.3.6.1.4.1.20044.18.3.3.213.1.2 | Columnpm1004Mesrxfp1LxAux1MeasPortn | read-only | deprecated | Not Used :This OID gives the receive power value read in the DDM (Digital Diagnostic Monitoring) of the XFP or OTX plugged in line (Unit = ?) |
| 1.3.6.1.4.1.20044.18.3.3.214 | Tablepm1004Mesrxfp1LxAux2MeasTable | not-accessible | deprecated | List of pm1004Mesrxfp1LxAux2Meas Article |
| 1.3.6.1.4.1.20044.18.3.3.214.1 | Rowpm1004Mesrxfp1LxAux2MeasEntry | not-accessible | deprecated | Row definition for the pm1004Mesrxfp1LxAux2Meas table |
| 1.3.6.1.4.1.20044.18.3.3.214.1.1 | Columnpm1004Mesrxfp1LxAux2MeasIndex | read-only | deprecated | Index definition for the pm1004Mesrxfp1LxAux2Meas table |
| 1.3.6.1.4.1.20044.18.3.3.214.1.2 | Columnpm1004Mesrxfp1LxAux2MeasPortn | read-only | deprecated | Not Used :This OID gives the receive power value read in the DDM (Digital Diagnostic Monitoring) of the XFP or OTX plugged in line (Unit = ?) |
| 1.3.6.1.4.1.20044.18.3.3.224 | Tablepm1004Mesrotx1AgingTable | not-accessible | current | List of pm1004Mesrotx1Aging Articl e |
| 1.3.6.1.4.1.20044.18.3.3.224.1 | Rowpm1004Mesrotx1AgingEntry | not-accessible | current | Row definition for the pm1004Mesrotx1Aging table |
| 1.3.6.1.4.1.20044.18.3.3.224.1.1 | Columnpm1004Mesrotx1AgingIndex | read-only | current | Index definition for the pm1004Mesrotx1Aging table |
| 1.3.6.1.4.1.20044.18.3.3.224.1.2 | Columnpm1004Mesrotx1AgingPortn | read-only | current | Line OTX TLH Aging :This OID gives the aging of the Line OTX TLH, read from the DDM (Digital Diagnostic Monitoring) (Aging = AV) (Unit = %) <Help> This measure… |
| 1.3.6.1.4.1.20044.18.3.3.225 | Tablepm1004Mesrotx1LaserTemperatureTable | not-accessible | deprecated | List of pm1004Mesrotx1LaserTemperature Article |
| 1.3.6.1.4.1.20044.18.3.3.225.1 | Rowpm1004Mesrotx1LaserTemperatureEntry | not-accessible | deprecated | Row definition for the pm1004Mesrotx1LaserTemperature table |
| 1.3.6.1.4.1.20044.18.3.3.225.1.1 | Columnpm1004Mesrotx1LaserTemperatureIndex | read-only | deprecated | Index definition for the pm1004Mesrotx1LaserTemperature table |
| 1.3.6.1.4.1.20044.18.3.3.225.1.2 | Columnpm1004Mesrotx1LaserTemperaturePortn | read-only | deprecated | Line OTX TLH Laser Temperature :This OID gives the laser temperature of the Line OTX TLH, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/2… |
| 1.3.6.1.4.1.20044.18.3.3.226 | Tablepm1004Mesrotx1FreqDeviationTable | not-accessible | current | List of pm1004Mesrotx1FreqDeviation Article |
| 1.3.6.1.4.1.20044.18.3.3.226.1 | Rowpm1004Mesrotx1FreqDeviationEntry | not-accessible | current | Row definition for the pm1004Mesrotx1FreqDeviation table |
| 1.3.6.1.4.1.20044.18.3.3.226.1.1 | Columnpm1004Mesrotx1FreqDeviationIndex | read-only | current | Index definition for the pm1004Mesrotx1FreqDeviation table |
| 1.3.6.1.4.1.20044.18.3.3.226.1.2 | Columnpm1004Mesrotx1FreqDeviationPortn | read-only | current | Line OTX TLH Frequency Deviation :This OID gives the frequency deviation of the Line OTX TLH, read from the DDM (Digital Diagnostic Monitoring) (Deviation = (A… |
| 1.3.6.1.4.1.20044.18.3.3.227 | Tablepm1004Mesrotx1LaserWvlengthTable | not-accessible | current | List of pm1004Mesrotx1LaserWvlength Article |
| 1.3.6.1.4.1.20044.18.3.3.227.1 | Rowpm1004Mesrotx1LaserWvlengthEntry | not-accessible | current | Row definition for the pm1004Mesrotx1LaserWvlength table |
| 1.3.6.1.4.1.20044.18.3.3.227.1.1 | Columnpm1004Mesrotx1LaserWvlengthIndex | read-only | current | Index definition for the pm1004Mesrotx1LaserWvlength table |
| 1.3.6.1.4.1.20044.18.3.3.227.1.2 | Columnpm1004Mesrotx1LaserWvlengthPortn | read-only | current | Line Optical Module Wavelength :This OID gives the laser wavelength of the Line OTX TLH, read from the DDM (Digital Diagnostic Monitoring) (Wavelength=29979245… |
| 1.3.6.1.4.1.20044.18.4 | Nodepm1004counters | |||
| 1.3.6.1.4.1.20044.18.4.1 | Nodepm1004CntOther | |||
| 1.3.6.1.4.1.20044.18.4.2 | Nodepm1004CntClient | |||
| 1.3.6.1.4.1.20044.18.4.2.16 | Tablepm1004CntupRaRemCntTable | not-accessible | current | List of pm1004CntupRaRemCnt Articl e |
| 1.3.6.1.4.1.20044.18.4.2.16.1 | Rowpm1004CntupRaRemCntEntry | not-accessible | current | Row definition for the pm1004CntupRaRemCnt table |
| 1.3.6.1.4.1.20044.18.4.2.16.1.1 | Columnpm1004CntupRaRemCntIndex | read-only | current | Index definition for the pm1004CntupRaRemCnt table |
| 1.3.6.1.4.1.20044.18.4.2.16.1.2 | Columnpm1004CntupRaRemCntValuePortn | read-only | current | Client Rate Adapt. Words Removal :This counter is incremented each time a rate adaptation 10B word is removed from the Client input stream |
| 1.3.6.1.4.1.20044.18.4.2.16.1.3 | Columnpm1004CntupRaRemCntErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the rate adaptation removal counter value is invalid on Port |
| 1.3.6.1.4.1.20044.18.4.2.16.1.4 | Columnpm1004CntupRaRemCntOverloadPortn | read-only | current | Client Counter Overload :This OID when set indicates a rate adaptation removal counter overload on Port |
| 1.3.6.1.4.1.20044.18.4.2.24 | Tablepm1004CntupRaInsCntTable | not-accessible | current | List of pm1004CntupRaInsCnt Articl e |
| 1.3.6.1.4.1.20044.18.4.2.24.1 | Rowpm1004CntupRaInsCntEntry | not-accessible | current | Row definition for the pm1004CntupRaInsCnt table |
| 1.3.6.1.4.1.20044.18.4.2.24.1.1 | Columnpm1004CntupRaInsCntIndex | read-only | current | Index definition for the pm1004CntupRaInsCnt table |
| 1.3.6.1.4.1.20044.18.4.2.24.1.2 | Columnpm1004CntupRaInsCntValuePortn | read-only | current | Client Rate Adapt. Words Insertion :This counter is incremented each time a rate adaptation 10B word is inserted in the Client input stream |
| 1.3.6.1.4.1.20044.18.4.2.24.1.3 | Columnpm1004CntupRaInsCntErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the rate adaptation insertion counter value is invalid on Port |
| 1.3.6.1.4.1.20044.18.4.2.24.1.4 | Columnpm1004CntupRaInsCntOverloadPortn | read-only | current | Client Counter Overload :This OID when set indicates a rate adaptation insertion counter overload on Port |
| 1.3.6.1.4.1.20044.18.4.2.32 | Tablepm1004CntupRdErrCntTable | not-accessible | current | List of pm1004CntupRdErrCnt Articl e |
| 1.3.6.1.4.1.20044.18.4.2.32.1 | Rowpm1004CntupRdErrCntEntry | not-accessible | current | Row definition for the pm1004CntupRdErrCnt table |
| 1.3.6.1.4.1.20044.18.4.2.32.1.1 | Columnpm1004CntupRdErrCntIndex | read-only | current | Index definition for the pm1004CntupRdErrCnt table |
| 1.3.6.1.4.1.20044.18.4.2.32.1.2 | Columnpm1004CntupRdErrCntValuePortn | read-only | current | Client Input Errors :This counter is increased each time a 10b/8b running disparity error is detected on the Client input stream <Help> This counter gives the … |
| 1.3.6.1.4.1.20044.18.4.2.32.1.3 | Columnpm1004CntupRdErrCntErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the client error counter value is invalid on Por t |
| 1.3.6.1.4.1.20044.18.4.2.32.1.4 | Columnpm1004CntupRdErrCntOverloadPortn | read-only | current | Client Counter Overload :This OID when set indicates a client input error counter overload on Port |
| 1.3.6.1.4.1.20044.18.4.2.40 | Tablepm1004CntupTimCntTable | not-accessible | current | List of pm1004CntupTimCnt Articl e |
| 1.3.6.1.4.1.20044.18.4.2.40.1 | Rowpm1004CntupTimCntEntry | not-accessible | current | Row definition for the pm1004CntupTimCnt table |
| 1.3.6.1.4.1.20044.18.4.2.40.1.1 | Columnpm1004CntupTimCntIndex | read-only | current | Index definition for the pm1004CntupTimCnt table |
| 1.3.6.1.4.1.20044.18.4.2.40.1.2 | Columnpm1004CntupTimCntValuePortn | read-only | current | Client Upstream Timer Counter :This is the timing counter dedicated to the upstream access counters. It is incremented every 125 us . |
| 1.3.6.1.4.1.20044.18.4.2.40.1.3 | Columnpm1004CntupTimCntErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the upstream timing counter value is invalid on Port |
| 1.3.6.1.4.1.20044.18.4.2.40.1.4 | Columnpm1004CntupTimCntOverloadPortn | read-only | current | Client Counter Overload :This OID when set indicates a upstream timing counter overload on Por t |
| 1.3.6.1.4.1.20044.18.4.2.48 | Tablepm1004CntupCvErrCntTable | not-accessible | current | List of pm1004CntupCvErrCnt Articl e |
| 1.3.6.1.4.1.20044.18.4.2.48.1 | Rowpm1004CntupCvErrCntEntry | not-accessible | current | Row definition for the pm1004CntupCvErrCnt table |
| 1.3.6.1.4.1.20044.18.4.2.48.1.1 | Columnpm1004CntupCvErrCntIndex | read-only | current | Index definition for the pm1004CntupCvErrCnt table |
| 1.3.6.1.4.1.20044.18.4.2.48.1.2 | Columnpm1004CntupCvErrCntValuePortn | read-only | current | Client Coding Violation Counter :This counter is increased each time a 10b/8b coding violation is detected on the Client input stream |
| 1.3.6.1.4.1.20044.18.4.2.48.1.3 | Columnpm1004CntupCvErrCntErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the coding violation counter value is invalid on Por t |
| 1.3.6.1.4.1.20044.18.4.2.48.1.4 | Columnpm1004CntupCvErrCntOverloadPortn | read-only | current | Client Counter Overload :This OID when set indicates a coding violation counter overload on Por t |
| 1.3.6.1.4.1.20044.18.4.2.64 | Tablepm1004CntdwCbipCntTable | not-accessible | current | List of pm1004CntdwCbipCnt Articl e |
| 1.3.6.1.4.1.20044.18.4.2.64.1 | Rowpm1004CntdwCbipCntEntry | not-accessible | current | Row definition for the pm1004CntdwCbipCnt table |
| 1.3.6.1.4.1.20044.18.4.2.64.1.1 | Columnpm1004CntdwCbipCntIndex | read-only | current | Index definition for the pm1004CntdwCbipCnt table |
| 1.3.6.1.4.1.20044.18.4.2.64.1.2 | Columnpm1004CntdwCbipCntValuePortn | read-only | current | Client Output Errors :This counter is incremented each time a CBIP parity error is detected on the Client output stream <Help> This counter gives the number of… |
| 1.3.6.1.4.1.20044.18.4.2.64.1.3 | Columnpm1004CntdwCbipCntErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the CBIP error counter value is invalid on Por t |
| 1.3.6.1.4.1.20044.18.4.2.64.1.4 | Columnpm1004CntdwCbipCntOverloadPortn | read-only | current | Client CBIP Counter Overload :This OID when set indicates a CBIP error counter overload on Port |
| 1.3.6.1.4.1.20044.18.4.2.72 | Tablepm1004CntdwTimCntTable | not-accessible | current | List of pm1004CntdwTimCnt Articl e |
| 1.3.6.1.4.1.20044.18.4.2.72.1 | Rowpm1004CntdwTimCntEntry | not-accessible | current | Row definition for the pm1004CntdwTimCnt table |
| 1.3.6.1.4.1.20044.18.4.2.72.1.1 | Columnpm1004CntdwTimCntIndex | read-only | current | Index definition for the pm1004CntdwTimCnt table |
| 1.3.6.1.4.1.20044.18.4.2.72.1.2 | Columnpm1004CntdwTimCntValuePortn | read-only | current | Client Downstream Timer Counter :This is the timing counter dedicated to the downstream access counters. It is incremented every 125 us . |
| 1.3.6.1.4.1.20044.18.4.2.72.1.3 | Columnpm1004CntdwTimCntErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the downstream timer counter value is invalid on Port |
| 1.3.6.1.4.1.20044.18.4.2.72.1.4 | Columnpm1004CntdwTimCntOverloadPortn | read-only | current | Client Counter Overload :This OID when set indicates a downstream timer counter overload on Port |
| 1.3.6.1.4.1.20044.18.4.3 | Nodepm1004CntLine | |||
| 1.3.6.1.4.1.20044.18.4.3.152 | Tablepm1004CntdfrmB1ErrCntTable | not-accessible | current | List of pm1004CntdfrmB1ErrCnt Article |
| 1.3.6.1.4.1.20044.18.4.3.152.1 | Rowpm1004CntdfrmB1ErrCntEntry | not-accessible | current | Row definition for the pm1004CntdfrmB1ErrCnt table |
| 1.3.6.1.4.1.20044.18.4.3.152.1.1 | Columnpm1004CntdfrmB1ErrCntIndex | read-only | current | Index definition for the pm1004CntdfrmB1ErrCnt table |
| 1.3.6.1.4.1.20044.18.4.3.152.1.2 | Columnpm1004CntdfrmB1ErrCntValuePortn | read-only | current | Line Input SM-BIP8 Errors :This counter is incremented each time a SM BIP error is detected on the Deframer input stream. <Help> This counter gives the number … |
| 1.3.6.1.4.1.20044.18.4.3.152.1.3 | Columnpm1004CntdfrmB1ErrCntErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the SM BIP error counter value is invalid on Por t |
| 1.3.6.1.4.1.20044.18.4.3.152.1.4 | Columnpm1004CntdfrmB1ErrCntOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a SM BIP error counter overload on Port |
| 1.3.6.1.4.1.20044.18.4.3.153 | Tablepm1004CntdfrmTimCntTable | not-accessible | current | List of pm1004CntdfrmTimCnt Articl e |
| 1.3.6.1.4.1.20044.18.4.3.153.1 | Rowpm1004CntdfrmTimCntEntry | not-accessible | current | Row definition for the pm1004CntdfrmTimCnt table |
| 1.3.6.1.4.1.20044.18.4.3.153.1.1 | Columnpm1004CntdfrmTimCntIndex | read-only | current | Index definition for the pm1004CntdfrmTimCnt table |
| 1.3.6.1.4.1.20044.18.4.3.153.1.2 | Columnpm1004CntdfrmTimCntValuePortn | read-only | current | Line Timer Counter :This is the timing counter dedicated to the downstream deframer counters. It is incremented every 125 us. |
| 1.3.6.1.4.1.20044.18.4.3.153.1.3 | Columnpm1004CntdfrmTimCntErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Por t |
| 1.3.6.1.4.1.20044.18.4.3.153.1.4 | Columnpm1004CntdfrmTimCntOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port |
| 1.3.6.1.4.1.20044.18.4.3.154 | Tablepm1004CntdfrmPrimLineErrCntTable | not-accessible | current | List of pm1004CntdfrmPrimLineErrCnt Article |
| 1.3.6.1.4.1.20044.18.4.3.154.1 | Rowpm1004CntdfrmPrimLineErrCntEntry | not-accessible | current | Row definition for the pm1004CntdfrmPrimLineErrCnt table |
| 1.3.6.1.4.1.20044.18.4.3.154.1.1 | Columnpm1004CntdfrmPrimLineErrCntIndex | read-only | current | Index definition for the pm1004CntdfrmPrimLineErrCnt table |
| 1.3.6.1.4.1.20044.18.4.3.154.1.2 | Columnpm1004CntdfrmPrimLineErrCntValuePortn | read-only | current | Line Input FEC Corrected Errors :This counter is incremented each time the FEC is correcting an error on the line input stream. <Help> This counter gives the n… |
| 1.3.6.1.4.1.20044.18.4.3.154.1.3 | Columnpm1004CntdfrmPrimLineErrCntErrorPortn | read-only | current | FEC Counter Error :This bit when set indicates the FEC corrected errors counter value is invalid on Line |
| 1.3.6.1.4.1.20044.18.4.3.154.1.4 | Columnpm1004CntdfrmPrimLineErrCntOverloadPortn | read-only | current | FEC Counter Overload :This bit when set indicates a FEC corrected errors counter overload on Lin e |
| 1.3.6.1.4.1.20044.18.4.259 | Scalarpm1004CntCountersReset | read-write | current | Counters Reset:This OID resets and restarts all the counters |
| 1.3.6.1.4.1.20044.18.4.260 | Scalarpm1004CntCountersStop | read-write | current | Counters stop:This OID stops all the counters |
| 1.3.6.1.4.1.20044.18.6 | Nodepm1004controlsWrite | |||
| 1.3.6.1.4.1.20044.18.6.1 | Nodepm1004CtrlOther | |||
| 1.3.6.1.4.1.20044.18.6.1.1 | Nodepm1004CtrlconfMgnt1 | |||
| 1.3.6.1.4.1.20044.18.6.1.1.1 | Scalarpm1004CtrlConf1Load1 | read-write | current | Load Configuration Tables Set Nb 1 :When set this OID enables loading from flash configuration1 into the PM. |
| 1.3.6.1.4.1.20044.18.6.1.1.2 | Scalarpm1004CtrlConf2Load1 | read-write | current | Load Configuration Tables Set Nb 2 :When set this OID enables loading from flash configuration2 into the PM. |
| 1.3.6.1.4.1.20044.18.6.1.1.10 | Scalarpm1004CtrlConf2Flash1 | read-write | current | Write Configuration Tables :This OID saves the current configuration of the PM as configuration2 in the flash. <Help> This control saves the customer configura… |
| 1.3.6.1.4.1.20044.18.6.1.1.14 | Scalarpm1004CtrlConf2Clear1 | read-write | current | Clear Configuration Tables :This OID clears the configuration tables from configuration2 in the flash. <Help> This control restores the default configuration o… |
| 1.3.6.1.4.1.20044.18.6.1.4 | Nodepm1004Ctrlsynth4 | |||
| 1.3.6.1.4.1.20044.18.6.1.4.1 | Scalarpm1004CtrlCorrelatOn | read-write | current | Enable Alarm Correlation :This OID enables the alarm correlation in the PM. |
| 1.3.6.1.4.1.20044.18.6.1.4.2 | Scalarpm1004CtrlCorrelatOff | read-write | current | Disable Alarm Correlation :This OID disables the alarm correlation in the PM. |
| 1.3.6.1.4.1.20044.18.6.1.5 | Nodepm1004CtrlswMgnt | |||
| 1.3.6.1.4.1.20044.18.6.1.5.2 | Scalarpm1004CtrlColdReset | read-write | current | PM Cold Reset :This OID, when set, causes a cold reset of the PM. This reset is traffic affecting, and the configuration of PM is reloaded on start-up. <Help> … |
| 1.3.6.1.4.1.20044.18.6.1.5.3 | Scalarpm1004CtrlWarmReset | read-write | current | PM Warm Reset :This OID, when set, causes a warm reset of the PM. This reset is not traffic affecting, and the configuration of PM remains unchanged. <Help> Th… |
| 1.3.6.1.4.1.20044.18.6.1.5.5 | Scalarpm1004CtrlLoadSwBank1 | read-write | current | Set Software Nb 1 As Active :This OID, when set, loads the SW from bank1 into the PM. It must be followed by a reset. <Help> This controls selects the first SW… |
| 1.3.6.1.4.1.20044.18.6.1.5.6 | Scalarpm1004CtrlLoadSwBank2 | read-write | current | Set Software Nb 2 As Active :This OID, when set, loads the SW from bank2 into the PM. It must be followed by a reset. <Help> This controls selects the second S… |
| 1.3.6.1.4.1.20044.18.6.1.6 | Nodepm1004CtrlgwMgnt | |||
| 1.3.6.1.4.1.20044.18.6.1.6.1 | Scalarpm1004CtrlCurrentGwReset | read-write | current | Active Gateware Reset :This OID, when set, resets the active gateware. It is traffic affecting. |
| 1.3.6.1.4.1.20044.18.6.1.6.5 | Scalarpm1004CtrlLoadGwBank1 | read-write | current | Set Gateware Nb 1 As Active :This OID, when set, loads the GW from bank1 (Flash) into the PM. It is followed by an automatic gateware cold reset. <Help> This c… |
| 1.3.6.1.4.1.20044.18.6.1.6.6 | Scalarpm1004CtrlLoadGwBank2 | read-write | current | Set Gateware Nb 2 As Active :This OID, when set, loads the GW from bank2 (Flash) into the PM. It is followed by an automatic gateware cold reset. |
| 1.3.6.1.4.1.20044.18.6.1.6.7 | Scalarpm1004CtrlLoadGwBank3 | read-write | current | Set Gateware Nb 3 As Active :This OID, when set, loads the GW from bank3 (Flash) into the PM. It is followed by an automatic gateware cold reset. <Help> This c… |
| 1.3.6.1.4.1.20044.18.6.1.6.8 | Scalarpm1004CtrlLoadGwBank4 | read-write | current | Set Gateware Nb 4 As Active :This OID, when set, loads the GW from bank4 (Flash) into the PM. It is followed by an automatic gateware cold reset. |
| 1.3.6.1.4.1.20044.18.6.1.192 | Nodepm1004CtrlledTest | |||
| 1.3.6.1.4.1.20044.18.6.1.192.1 | Scalarpm1004CtrlGreenLed | read-write | current | Green Leds Test :This OID switches on all the green Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to green |
| 1.3.6.1.4.1.20044.18.6.1.192.2 | Scalarpm1004CtrlRedLed | read-write | current | Red Leds Test :This OID switches on all the red Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to red |
| 1.3.6.1.4.1.20044.18.6.1.192.3 | Scalarpm1004CtrlLedOff | read-write | current | Leds Off :This OID switches off all the Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to OFF |
| 1.3.6.1.4.1.20044.18.6.1.193 | Nodepm1004CtrlmoduleOosMode | |||
| 1.3.6.1.4.1.20044.18.6.1.193.1 | Scalarpm1004CtrlModuleOosMode | read-write | current | PM Out Of Service :This OID sets the PM Out Of Service <Help> This control defines the service state of the complete module |
| 1.3.6.1.4.1.20044.18.6.1.197 | Nodepm1004CtrlmaintenanceMode | |||
| 1.3.6.1.4.1.20044.18.6.1.197.1 | Scalarpm1004CtrlMaintenanceMode | read-write | current | Module Maintenance Mode :This OID enables the maintenance mode on the PM. <Help> This control enables the maintenance mode on the PM. |
| 1.3.6.1.4.1.20044.18.6.1.198 | Nodepm1004CtrldccEnable | |||
| 1.3.6.1.4.1.20044.18.6.1.198.1 | Scalarpm1004CtrlDccEnable | read-write | current | DCC Enable :This OID enables the DCC mode on the PM <Help> This control enables the DCC mode on the PM |
| 1.3.6.1.4.1.20044.18.6.2 | Nodepm1004CtrlClient | |||
| 1.3.6.1.4.1.20044.18.6.2.16 | Tablepm1004CtrlaccessLoopTable | not-accessible | current | List of pm1004CtrlaccessLoop Articl e |
| 1.3.6.1.4.1.20044.18.6.2.16.1 | Rowpm1004CtrlaccessLoopEntry | not-accessible | current | Row definition for the pm1004CtrlaccessLoop table |
| 1.3.6.1.4.1.20044.18.6.2.16.1.1 | Columnpm1004CtrlaccessLoopIndex | read-only | current | Index definition for the pm1004CtrlaccessLoop table |
| 1.3.6.1.4.1.20044.18.6.2.16.1.2 | Columnpm1004CtrlaccessLoopPortn | read-write | current | Client Facility Loopback :This OID operates a Client Facility Loopback, looping client input signal on the client output port. The loop is located on the clien… |
| 1.3.6.1.4.1.20044.18.6.2.18 | Tablepm1004CtrlportOosModeTable | not-accessible | current | List of pm1004CtrlportOosMode Article |
| 1.3.6.1.4.1.20044.18.6.2.18.1 | Rowpm1004CtrlportOosModeEntry | not-accessible | current | Row definition for the pm1004CtrlportOosMode table |
| 1.3.6.1.4.1.20044.18.6.2.18.1.1 | Columnpm1004CtrlportOosModeIndex | read-only | current | Index definition for the pm1004CtrlportOosMode table |
| 1.3.6.1.4.1.20044.18.6.2.18.1.2 | Columnpm1004CtrlportOosModePortn | read-write | current | Client Port Out Of Service :This OID sets the client port Out Of Service <Help> This controls defines the service state of the client port |
| 1.3.6.1.4.1.20044.18.6.2.19 | Tablepm1004CtrlsfpOnCtrlTable | not-accessible | current | List of pm1004CtrlsfpOnCtrl Articl e |
| 1.3.6.1.4.1.20044.18.6.2.19.1 | Rowpm1004CtrlsfpOnCtrlEntry | not-accessible | current | Row definition for the pm1004CtrlsfpOnCtrl table |
| 1.3.6.1.4.1.20044.18.6.2.19.1.1 | Columnpm1004CtrlsfpOnCtrlIndex | read-only | current | Index definition for the pm1004CtrlsfpOnCtrl table |
| 1.3.6.1.4.1.20044.18.6.2.19.1.2 | Columnpm1004CtrlsfpOnCtrlPortn | read-write | current | Client SFP Optical Laser ON :This OID switches on the SFP. |
| 1.3.6.1.4.1.20044.18.6.2.20 | Tablepm1004CtrlsfpOffCtrlTable | not-accessible | current | List of pm1004CtrlsfpOffCtrl Articl e |
| 1.3.6.1.4.1.20044.18.6.2.20.1 | Rowpm1004CtrlsfpOffCtrlEntry | not-accessible | current | Row definition for the pm1004CtrlsfpOffCtrl table |
| 1.3.6.1.4.1.20044.18.6.2.20.1.1 | Columnpm1004CtrlsfpOffCtrlIndex | read-only | current | Index definition for the pm1004CtrlsfpOffCtrl table |
| 1.3.6.1.4.1.20044.18.6.2.20.1.2 | Columnpm1004CtrlsfpOffCtrlPortn | read-write | current | Client SFP Laser Shutdown :This OID switches off the SFP. <Help> This control defines the laser state of the client transceive r |
| 1.3.6.1.4.1.20044.18.6.2.21 | Tablepm1004CtrlcsfUpInsTable | not-accessible | current | List of pm1004CtrlcsfUpIns Articl e |
| 1.3.6.1.4.1.20044.18.6.2.21.1 | Rowpm1004CtrlcsfUpInsEntry | not-accessible | current | Row definition for the pm1004CtrlcsfUpIns table |
| 1.3.6.1.4.1.20044.18.6.2.21.1.1 | Columnpm1004CtrlcsfUpInsIndex | read-only | current | Index definition for the pm1004CtrlcsfUpIns table |
| 1.3.6.1.4.1.20044.18.6.2.21.1.2 | Columnpm1004CtrlcsfUpInsPortn | read-write | current | Client Signal Fail Insertion :This OID, when set, inserts a client signal fail in the upstream client Port. <Help> This control inserts a Client Signal Fail fo… |
| 1.3.6.1.4.1.20044.18.6.2.22 | Tablepm1004CtrlcaisDwInsTable | not-accessible | current | List of pm1004CtrlcaisDwIns Articl e |
| 1.3.6.1.4.1.20044.18.6.2.22.1 | Rowpm1004CtrlcaisDwInsEntry | not-accessible | current | Row definition for the pm1004CtrlcaisDwIns table |
| 1.3.6.1.4.1.20044.18.6.2.22.1.1 | Columnpm1004CtrlcaisDwInsIndex | read-only | current | Index definition for the pm1004CtrlcaisDwIns table |
| 1.3.6.1.4.1.20044.18.6.2.22.1.2 | Columnpm1004CtrlcaisDwInsPortn | read-write | current | Client AIS Insertion :This OID, when set, inserts a client AIS on the downstream client Port. <Help> This control inserts a Client AIS for the client port |
| 1.3.6.1.4.1.20044.18.6.2.26 | Tablepm1004CtrlclientAccessTermLoopTable | not-accessible | current | List of pm1004CtrlclientAccessTermLoop Article |
| 1.3.6.1.4.1.20044.18.6.2.26.1 | Rowpm1004CtrlclientAccessTermLoopEntry | not-accessible | current | Row definition for the pm1004CtrlclientAccessTermLoop table |
| 1.3.6.1.4.1.20044.18.6.2.26.1.1 | Columnpm1004CtrlclientAccessTermLoopIndex | read-only | current | Index definition for the pm1004CtrlclientAccessTermLoop table |
| 1.3.6.1.4.1.20044.18.6.2.26.1.2 | Columnpm1004CtrlclientAccessTermLoopPortn | read-write | current | Client Terminal Loopback :This OID operates a Client Terminal Loopback, looping client input signal on the client output port. The loop is located on the line … |
| 1.3.6.1.4.1.20044.18.6.2.35 | Tablepm1004CtrlresetCount15PortTable | not-accessible | current | List of pm1004CtrlresetCount15Port Article |
| 1.3.6.1.4.1.20044.18.6.2.35.1 | Rowpm1004CtrlresetCount15PortEntry | not-accessible | current | Row definition for the pm1004CtrlresetCount15Port table |
| 1.3.6.1.4.1.20044.18.6.2.35.1.1 | Columnpm1004CtrlresetCount15PortIndex | read-only | current | Index definition for the pm1004CtrlresetCount15Port table |
| 1.3.6.1.4.1.20044.18.6.2.35.1.2 | Columnpm1004CtrlclientResetAllPerfCount15Portn | read-write | current | Client 15-min Counters Reset :This OID resets all the current 15-min Counters on the client port |
| 1.3.6.1.4.1.20044.18.6.2.36 | Tablepm1004CtrlresetCount24PortTable | not-accessible | current | List of pm1004CtrlresetCount24Port Article |
| 1.3.6.1.4.1.20044.18.6.2.36.1 | Rowpm1004CtrlresetCount24PortEntry | not-accessible | current | Row definition for the pm1004CtrlresetCount24Port table |
| 1.3.6.1.4.1.20044.18.6.2.36.1.1 | Columnpm1004CtrlresetCount24PortIndex | read-only | current | Index definition for the pm1004CtrlresetCount24Port table |
| 1.3.6.1.4.1.20044.18.6.2.36.1.2 | Columnpm1004CtrlclientResetAllPerfCount24Portn | read-write | current | Client 24-hours Counters Reset :This OID resets all the current 24-hours Counters on the client port |
| 1.3.6.1.4.1.20044.18.6.2.51 | Tablepm1004CtrlprotocolTable | not-accessible | current | List of pm1004Ctrlprotocol Articl e |
| 1.3.6.1.4.1.20044.18.6.2.51.1 | Rowpm1004CtrlprotocolEntry | not-accessible | current | Row definition for the pm1004Ctrlprotocol table |
| 1.3.6.1.4.1.20044.18.6.2.51.1.1 | Columnpm1004CtrlprotocolIndex | read-only | current | Index definition for the pm1004Ctrlprotocol table |
| 1.3.6.1.4.1.20044.18.6.2.51.1.2 | Columnpm1004CtrlprotocolPortn | read-write | current | Client Protocol : This OID sets the protocol of the Client port . |
| 1.3.6.1.4.1.20044.18.6.3 | Nodepm1004CtrlLine | |||
| 1.3.6.1.4.1.20044.18.6.3.64 | Nodepm1004CtrlcommAccessLoop | |||
| 1.3.6.1.4.1.20044.18.6.3.64.1 | Scalarpm1004CtrlCommAccessloop | read-write | deprecated | PM Full Access Loop Mode :This OID, when set, puts the module in common access loop back, looping the 10 Gb/s output signal on the 10 Gb/s input. |
| 1.3.6.1.4.1.20044.18.6.3.66 | Nodepm1004CtrllineLoop | |||
| 1.3.6.1.4.1.20044.18.6.3.66.1 | Scalarpm1004CtrlLineLoop | read-write | deprecated | PM Line Loop Mode :This OID, when set at '1' puts the module in line loopback mode, looping the received 10 Gb/s signal on the transmit 10 Gb/s output. The Ups… |
| 1.3.6.1.4.1.20044.18.6.3.67 | Nodepm1004CtrlmsAis | |||
| 1.3.6.1.4.1.20044.18.6.3.67.1 | Scalarpm1004CtrlMsAis | read-write | current | Insert MS-AIS/L-AIS On Line Output :This OID, when set, inserts an MS-AIS/L-AIS in the outgoing STM-64/OC-192 signal. |
| 1.3.6.1.4.1.20044.18.6.3.69 | Tablepm1004CtrlfecDisableTable | not-accessible | current | List of pm1004CtrlfecDisable Articl e |
| 1.3.6.1.4.1.20044.18.6.3.69.1 | Rowpm1004CtrlfecDisableEntry | not-accessible | current | Row definition for the pm1004CtrlfecDisable table |
| 1.3.6.1.4.1.20044.18.6.3.69.1.1 | Columnpm1004CtrlfecDisableIndex | read-only | current | Index definition for the pm1004CtrlfecDisable table |
| 1.3.6.1.4.1.20044.18.6.3.69.1.2 | Columnpm1004CtrlfecDisablePortn | read-write | current | Forward Error Correction Inhibition :This OID, when set, inhibits the Forward Error Correction feature on the line input <Help> This control enables/disables t… |
| 1.3.6.1.4.1.20044.18.6.3.73 | Nodepm1004CtrlProtMgnt | |||
| 1.3.6.1.4.1.20044.18.6.3.73.1 | Scalarpm1004CtrlLineNumber | read-write | current | Active Line Number : This OID sets the active line number |
| 1.3.6.1.4.1.20044.18.6.3.73.2 | Scalarpm1004CtrlProtMode | read-write | current | Line Switch Mode (Auto Or Manual) :This bit selects the manual (1) or automatic (0) switch method <Help> This control defines the protection switch mode on the… |
| 1.3.6.1.4.1.20044.18.6.3.74 | Tablepm1004CtrllineOosModeTable | not-accessible | current | List of pm1004CtrllineOosMode Article |
| 1.3.6.1.4.1.20044.18.6.3.74.1 | Rowpm1004CtrllineOosModeEntry | not-accessible | current | Row definition for the pm1004CtrllineOosMode table |
| 1.3.6.1.4.1.20044.18.6.3.74.1.1 | Columnpm1004CtrllineOosModeIndex | read-only | current | Index definition for the pm1004CtrllineOosMode table |
| 1.3.6.1.4.1.20044.18.6.3.74.1.2 | Columnpm1004CtrllineOosModePortn | read-write | current | Line Port Out Of Service :This OID sets the line port Out Of Service <Help> This control defines the service state of the line port |
| 1.3.6.1.4.1.20044.18.6.3.86 | Tablepm1004CtrllineResetCount15LineTable | not-accessible | current | List of pm1004CtrllineResetCount15Line Article |
| 1.3.6.1.4.1.20044.18.6.3.86.1 | Rowpm1004CtrllineResetCount15LineEntry | not-accessible | current | Row definition for the pm1004CtrllineResetCount15Line table |
| 1.3.6.1.4.1.20044.18.6.3.86.1.1 | Columnpm1004CtrllineResetCount15LineIndex | read-only | current | Index definition for the pm1004CtrllineResetCount15Line table |
| 1.3.6.1.4.1.20044.18.6.3.86.1.2 | Columnpm1004CtrlresetAllPerfCount15Portn | read-write | current | Line 15-min Counters Reset :This OID resets all the current 15-min Counters on the client port |
| 1.3.6.1.4.1.20044.18.6.3.87 | Tablepm1004CtrllineResetCount24LineTable | not-accessible | current | List of pm1004CtrllineResetCount24Line Article |
| 1.3.6.1.4.1.20044.18.6.3.87.1 | Rowpm1004CtrllineResetCount24LineEntry | not-accessible | current | Row definition for the pm1004CtrllineResetCount24Line table |
| 1.3.6.1.4.1.20044.18.6.3.87.1.1 | Columnpm1004CtrllineResetCount24LineIndex | read-only | current | Index definition for the pm1004CtrllineResetCount24Line table |
| 1.3.6.1.4.1.20044.18.6.3.87.1.2 | Columnpm1004CtrlresetAllPerfCount24Portn | read-write | current | Line 24-hours Counters Reset :This OID resets all the current 24-hours Counters on the client port |
| 1.3.6.1.4.1.20044.18.6.3.208 | Tablepm1004CtrlxfpOnoffTable | not-accessible | current | List of pm1004CtrlxfpOnoff Articl e |
| 1.3.6.1.4.1.20044.18.6.3.208.1 | Rowpm1004CtrlxfpOnoffEntry | not-accessible | current | Row definition for the pm1004CtrlxfpOnoff table |
| 1.3.6.1.4.1.20044.18.6.3.208.1.1 | Columnpm1004CtrlxfpOnoffIndex | read-only | current | Index definition for the pm1004CtrlxfpOnoff table |
| 1.3.6.1.4.1.20044.18.6.3.208.1.2 | Columnpm1004CtrlxfpOnoffPortn | read-write | current | Line Optical Laser Shutdown :This OID switches off the XFP or the OTX <Help> This control defines the laser state of the line transceive r |
| 1.3.6.1.4.1.20044.18.6.3.209 | Tablepm1004CtrlxfpLineLoopTable | not-accessible | current | List of pm1004CtrlxfpLineLoop Article |
| 1.3.6.1.4.1.20044.18.6.3.209.1 | Rowpm1004CtrlxfpLineLoopEntry | not-accessible | current | Row definition for the pm1004CtrlxfpLineLoop table |
| 1.3.6.1.4.1.20044.18.6.3.209.1.1 | Columnpm1004CtrlxfpLineLoopIndex | read-only | current | Index definition for the pm1004CtrlxfpLineLoop table |
| 1.3.6.1.4.1.20044.18.6.3.209.1.2 | Columnpm1004CtrlxfpLineLoopPortn | read-write | current | Line Facility Loopback :This OID operates a Line Facility Loopback, looping line input signal on the line output port. The loop is located on the line transcei… |
| 1.3.6.1.4.1.20044.18.6.3.210 | Tablepm1004CtrlxfpXfiLoopTable | not-accessible | current | List of pm1004CtrlxfpXfiLoop Articl e |
| 1.3.6.1.4.1.20044.18.6.3.210.1 | Rowpm1004CtrlxfpXfiLoopEntry | not-accessible | current | Row definition for the pm1004CtrlxfpXfiLoop table |
| 1.3.6.1.4.1.20044.18.6.3.210.1.1 | Columnpm1004CtrlxfpXfiLoopIndex | read-only | current | Index definition for the pm1004CtrlxfpXfiLoop table |
| 1.3.6.1.4.1.20044.18.6.3.210.1.2 | Columnpm1004CtrlxfpXfiLoopPortn | read-write | current | Line Terminal Loopback :This OID operates a Line Terminal Loopback, looping line input signal on the line output port. The loop is located on all client transc… |
| 1.3.6.1.4.1.20044.18.6.3.212 | Tablepm1004CtrllineTunableChannelTable | not-accessible | current | List of pm1004CtrllineTunableChannel Article |
| 1.3.6.1.4.1.20044.18.6.3.212.1 | Rowpm1004CtrllineTunableChannelEntry | not-accessible | current | Row definition for the pm1004CtrllineTunableChannel table |
| 1.3.6.1.4.1.20044.18.6.3.212.1.1 | Columnpm1004CtrllineTunableChannelIndex | read-only | current | Index definition for the pm1004CtrllineTunableChannel table |
| 1.3.6.1.4.1.20044.18.6.3.212.1.2 | Columnpm1004CtrllineTunableChannelPortn | read-write | current | ITU Channel :This OID selects the ITU channel of the Line OTX TLH Laser <Help> This control defines the ITU channel of the Line OTX TLH Laser |
| 1.3.6.1.4.1.20044.18.6.3.213 | Tablepm1004CtrllinePhotodiodeModeTable | not-accessible | current | List of pm1004CtrllinePhotodiodeMode Article |
| 1.3.6.1.4.1.20044.18.6.3.213.1 | Rowpm1004CtrllinePhotodiodeModeEntry | not-accessible | current | Row definition for the pm1004CtrllinePhotodiodeMode table |
| 1.3.6.1.4.1.20044.18.6.3.213.1.1 | Columnpm1004CtrllinePhotodiodeModeIndex | read-only | current | Index definition for the pm1004CtrllinePhotodiodeMode table |
| 1.3.6.1.4.1.20044.18.6.3.213.1.2 | Columnpm1004CtrllinePhotodiodeModePortn | read-write | current | OTX TLH Rx Sens. Mode :This OID defines the Rx sensiblity mode of the Line OTX TLH <Help> This control defines the receiver sensibility mode of the Line OTX TL… |
| 1.3.6.1.4.1.20044.18.6.3.214 | Tablepm1004CtrllinePhotodiodeValueTable | not-accessible | current | List of pm1004CtrllinePhotodiodeValue Article |
| 1.3.6.1.4.1.20044.18.6.3.214.1 | Rowpm1004CtrllinePhotodiodeValueEntry | not-accessible | current | Row definition for the pm1004CtrllinePhotodiodeValue table |
| 1.3.6.1.4.1.20044.18.6.3.214.1.1 | Columnpm1004CtrllinePhotodiodeValueIndex | read-only | current | Index definition for the pm1004CtrllinePhotodiodeValue table |
| 1.3.6.1.4.1.20044.18.6.3.214.1.2 | Columnpm1004CtrllinePhotodiodeValuePortn | read-write | current | OTX TLH Rx Sensibility :This OID sets the Rx sensibility of the Line OTX TLH (custom mode only) <Help> This control defines the receiver sensibility value (onl… |
| 1.3.6.1.4.1.20044.18.6.3.215 | Tablepm1004CtrllinePowerLaserTable | not-accessible | current | List of pm1004CtrllinePowerLaser Article |
| 1.3.6.1.4.1.20044.18.6.3.215.1 | Rowpm1004CtrllinePowerLaserEntry | not-accessible | current | Row definition for the pm1004CtrllinePowerLaser table |
| 1.3.6.1.4.1.20044.18.6.3.215.1.1 | Columnpm1004CtrllinePowerLaserIndex | read-only | current | Index definition for the pm1004CtrllinePowerLaser table |
| 1.3.6.1.4.1.20044.18.6.3.215.1.2 | Columnpm1004CtrllinePowerLaserPortn | read-write | current | Line Laser Output Power [3-5] :This OID sets the output power value on the laser of the Line OTX TLH (AV=Power*10+158) (Unit = dBm) <Help> This control defines… |
| 1.3.6.1.4.1.20044.18.6.3.216 | Nodepm1004CtrlotxVlhReset | |||
| 1.3.6.1.4.1.20044.18.6.3.216.1 | Scalarpm1004CtrlOtxVlhReset | read-write | current | OTX-VLH Reset :This OID resets the OTX-VLH module <Help> This control resets the OTX-VLH and its parameters |
| 1.3.6.1.4.1.20044.18.7 | Nodepm1004ri | |||
| 1.3.6.1.4.1.20044.18.7.1 | Nodepm1004riTable | |||
| 1.3.6.1.4.1.20044.18.7.1.1 | Tablepm1004RinvSfpTable | not-accessible | current | List of the SFPs on the selected module |
| 1.3.6.1.4.1.20044.18.7.1.1.1 | Rowpm1004RinvSfpEntry | not-accessible | current | Row definition for the SFP table |
| 1.3.6.1.4.1.20044.18.7.1.1.1.1 | Columnpm1004RinvSfpIndex | read-only | current | Index for SFP table |
| 1.3.6.1.4.1.20044.18.7.1.1.1.2 | Columnpm1004Rinvsfp | read-only | current | Inventory for the SFP: This OID contains the inventory for the SFP |
| 1.3.6.1.4.1.20044.18.7.1.2 | Tablepm1004RinvLineTable | not-accessible | current | List of the XFPs on the selected module |
| 1.3.6.1.4.1.20044.18.7.1.2.1 | Rowpm1004RinvLineEntry | not-accessible | current | Row definition for the XFP table |
| 1.3.6.1.4.1.20044.18.7.1.2.1.1 | Columnpm1004RinvLineIndex | read-only | current | Index for XFP table |
| 1.3.6.1.4.1.20044.18.7.1.2.1.2 | Columnpm1004RinvxfpLine | read-only | current | Inventory for the XFP: This OID contains the inventory for the XFP |
| 1.3.6.1.4.1.20044.18.7.2 | Scalarpm1004RinvReloadInventory | read-write | current | Reload the inventory: This OID triggers an inventory reload. |
| 1.3.6.1.4.1.20044.18.7.3 | Scalarpm1004RinvHwPlatform | read-only | current | HW platform description: This OID contains the description of the Hardware platform. |
| 1.3.6.1.4.1.20044.18.7.4 | Scalarpm1004RinvModulePlatform | read-only | current | Module platform description: This OID contains the description of the Module. |
| 1.3.6.1.4.1.20044.18.7.5 | Scalarpm1004RinvSwPlatform | read-only | current | SW platform description: This OID contains the description of the Software platform. |
| 1.3.6.1.4.1.20044.18.7.6 | Scalarpm1004RinvGwPlatform | read-only | current | GW platform desciption: This OID contains the description of the Gateware platform. |
| 1.3.6.1.4.1.20044.18.8 | Nodepm1004download | |||
| 1.3.6.1.4.1.20044.18.8.1 | Nodepm1004DwlOther | |||
| 1.3.6.1.4.1.20044.18.8.1.0 | Nodepm1004DwlrestartProcess | |||
| 1.3.6.1.4.1.20044.18.8.1.0.1 | Scalarpm1004DwlWarmRestartProcessed | read-only | current | Warm Restart :This OID indicates that the module last restart was a Warm RESTART |
| 1.3.6.1.4.1.20044.18.8.1.0.2 | Scalarpm1004DwlColdRestartProcessed | read-only | current | Cold Restart :This OID indicates that the module last restart was a Cold RESTART |
| 1.3.6.1.4.1.20044.18.8.1.1 | Nodepm1004DwlswBanksUsed | |||
| 1.3.6.1.4.1.20044.18.8.1.1.1 | Scalarpm1004DwlSwBank1Used | read-only | current | SW bank 1 active :This OID indicates the module is working on SW bank 1 <Help> This status indicates if the SW bank 1 is active or standb y |
| 1.3.6.1.4.1.20044.18.8.1.1.2 | Scalarpm1004DwlSwBank2Used | read-only | current | SW bank 2 active :This OID indicates the module is working on SW bank 2 <Help> This status indicates if the SW bank 2 is active or standb y |
| 1.3.6.1.4.1.20044.18.8.1.1.5 | Scalarpm1004DwlSwBank1Notempty | read-only | current | SW bank 1 loaded :This OID indicates a software is loaded in SW bank 1 <Help> This status indicates if the SW bank 1 contains SW packag e |
| 1.3.6.1.4.1.20044.18.8.1.1.6 | Scalarpm1004DwlSwBank2Notempty | read-only | current | SW bank 2 loaded :This OID indicates a software is loaded in SW bank 2 <Help> This status indicates if the SW bank 2 contains SW packag e |
| 1.3.6.1.4.1.20044.18.8.1.2 | Nodepm1004DwlgwBanksUsed | |||
| 1.3.6.1.4.1.20044.18.8.1.2.1 | Scalarpm1004DwlGwBank1Used | read-only | current | GW bank 1 active :This OID indicates the module is working on GW bank 1 <Help> This status indicates if the GW bank 1 is active or standb y |
| 1.3.6.1.4.1.20044.18.8.1.2.2 | Scalarpm1004DwlGwBank2Used | read-only | current | GW bank 2 active :This OID indicates the module is working on GW bank 2 |
| 1.3.6.1.4.1.20044.18.8.1.2.3 | Scalarpm1004DwlGwBank3Used | read-only | current | GW bank 3 active :This OID indicates the module is working on GW bank 3 <Help> This status indicates if the GW bank 3 is active or standb y |
| 1.3.6.1.4.1.20044.18.8.1.2.4 | Scalarpm1004DwlGwBank4Used | read-only | current | GW bank 4 active :This OID indicates the module is working on GW bank 4 |
| 1.3.6.1.4.1.20044.18.8.1.2.5 | Scalarpm1004DwlGwBank1Notempty | read-only | current | GW bank 1 loaded :This OID indicates a gateware is loaded in GW bank 1 <Help> This status indicates if the GW bank 1 contains GW packag e |
| 1.3.6.1.4.1.20044.18.8.1.2.6 | Scalarpm1004DwlGwBank2Notempty | read-only | current | GW bank 2 loaded :This OID indicates a gateware is loaded in GW bank 2 |
| 1.3.6.1.4.1.20044.18.8.1.2.7 | Scalarpm1004DwlGwBank3Notempty | read-only | current | GW bank 3 loaded :This OID indicates a gateware is loaded in GW bank 3 <Help> This status indicates if the GW bank 3 contains GW packag e |
| 1.3.6.1.4.1.20044.18.8.1.2.8 | Scalarpm1004DwlGwBank4Notempty | read-only | current | GW bank 4 loaded :This OID indicates a gateware is loaded in GW bank 4 |
| 1.3.6.1.4.1.20044.18.8.2 | Nodepm1004DwlClient | |||
| 1.3.6.1.4.1.20044.18.8.3 | Nodepm1004DwlLine | |||
| 1.3.6.1.4.1.20044.18.9 | Nodepm1004Config | |||
| 1.3.6.1.4.1.20044.18.9.1 | Nodepm1004CfgAccessCAisCsf | |||
| 1.3.6.1.4.1.20044.18.9.1.1 | Tablepm1004CfgClientcaiscsfTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.18.9.1.1.1 | Rowpm1004CfgClientcaiscsfEntry | not-accessible | current | Row definition for the accessCAisCsf table |
| 1.3.6.1.4.1.20044.18.9.1.1.1.1 | Columnpm1004CfgClientcaiscsfIndex | read-only | current | Index definition for the clientcaiscsf table |
| 1.3.6.1.4.1.20044.18.9.1.1.1.3 | Columnpm1004CfgCAisModePortn | read-write | current | CAIS mode on Client Port :This register enables/disables port laser shutdown on CAIS insertion condition |
| 1.3.6.1.4.1.20044.18.9.1.1.1.9 | Columnpm1004CfgUpAccessioAlmPortn | read-write | current | CSF contributors on Client Port :This register configures the contributors to upstream CSF insertion on the port. |
| 1.3.6.1.4.1.20044.18.9.1.1.1.10 | Columnpm1004CfgUpMapperDeAlmPortn | read-write | current | CSF contributors on Client Port :This register configures the contributors to upstream CSF insertion on the port. |
| 1.3.6.1.4.1.20044.18.9.1.1.1.11 | Columnpm1004CfgUpAccessioSdhAlmPortn | read-write | current | CSF contributors on Client Port :This register selects the contributors of SDH register to upstream CAIS/CSF on Port |
| 1.3.6.1.4.1.20044.18.9.1.1.1.17 | Columnpm1004CfgDownAccessioAlmPortn | read-write | current | CAIS contributors on Client Port :This register configures the contributors to downstream CAIS insertion on port. |
| 1.3.6.1.4.1.20044.18.9.1.1.1.18 | Columnpm1004CfgDownMapperDeAlmPortn | read-write | current | CAIS contributors on Client Port :This register configures the contributors to downstream CAIS insertion on port. |
| 1.3.6.1.4.1.20044.18.9.1.1.1.19 | Columnpm1004CfgDownDfrmAlmPortn | read-write | current | CAIS contributors on Client Port :This register configures the contributors to downstream CAIS insertion on port. |
| 1.3.6.1.4.1.20044.18.9.1.1.1.20 | Columnpm1004CfgDownLineSyncAlarmsPortn | read-write | deprecated | CAIS contributors on Client Port :This register configures the contributors to downstream CAIS insertion on port. |
| 1.3.6.1.4.1.20044.18.9.1.1.1.21 | Columnpm1004CfgDownAccessioSdhAlmPortn | read-write | current | CAIS contributors on Client Port :This register selects the contributors of SDH register to downstream CAIS/CSF on Port |
| 1.3.6.1.4.1.20044.18.9.2 | Nodepm1004CfgStartup | |||
| 1.3.6.1.4.1.20044.18.9.2.1 | Tablepm1004CfgClientStartupTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.18.9.2.1.1 | Rowpm1004CfgClientStartupEntry | not-accessible | current | Row definition for the startup table |
| 1.3.6.1.4.1.20044.18.9.2.1.1.1 | Columnpm1004CfgClientStartupIndex | read-only | current | Index definition for the clientStartup table |
| 1.3.6.1.4.1.20044.18.9.2.1.1.3 | Columnpm1004CfgSystConfPortPortn | read-write | current | Default Settings on Client Port :This register configures the default initialisation settings on the port. |
| 1.3.6.1.4.1.20044.18.9.2.1.1.4 | Columnpm1004CfgNetConfPortPortn | read-write | current | Default Protocol on Client Port :This register configures the default initialisation protocol on the port. |
| 1.3.6.1.4.1.20044.18.9.2.2 | Nodepm1004tablelineStartup | |||
| 1.3.6.1.4.1.20044.18.9.2.2.2 | Scalarpm1004CfgsystConfLine1 | read-write | current | Default Settings on Line 1 :This register configures the default initialisation settings on Line port 1. |
| 1.3.6.1.4.1.20044.18.9.2.2.5 | Scalarpm1004CfglineOptions1 | read-write | current | Default Options on Active Line Port :This register configures the default options on the active line port |
| 1.3.6.1.4.1.20044.18.9.2.2.6 | Scalarpm1004CfgsystConfLine2 | read-write | current | Default Settings on Line 2 :This register configures the default initialisation settings on Line port 2. |
| 1.3.6.1.4.1.20044.18.9.2.2.7 | Scalarpm1004CfglineSelection | read-write | current | Default Settings of active line :This register configures the start up active line. |
| 1.3.6.1.4.1.20044.18.9.2.3 | Tablepm1004CfgXfpTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.18.9.2.3.1 | Rowpm1004CfgXfpEntry | not-accessible | current | Row definition for the startup table |
| 1.3.6.1.4.1.20044.18.9.2.3.1.1 | Columnpm1004CfgXfpIndex | read-only | current | Index definition for the xfp tabl e |
| 1.3.6.1.4.1.20044.18.9.2.3.1.3 | Columnpm1004CfgSystConfXfpPortn | read-write | current | Default settings on XFP Port :This register configures the default initialisation settings on XFP port. |
| 1.3.6.1.4.1.20044.18.9.2.3.1.4 | Columnpm1004CfgDataRateConfXfpPortn | read-write | deprecated | :Reserved |
| 1.3.6.1.4.1.20044.18.9.3 | Nodepm1004CfgModPerfConfig | |||
| 1.3.6.1.4.1.20044.18.9.3.1 | Nodepm1004tablemodPerfConfig | |||
| 1.3.6.1.4.1.20044.18.9.3.1.2 | Scalarpm1004CfgperfMode | read-write | current | SONET or SDH monitoring mode :This OID defines the line monitoring mode (SONET or SDH mode) |
| 1.3.6.1.4.1.20044.18.9.4 | Nodepm1004CfgJ0Client | |||
| 1.3.6.1.4.1.20044.18.9.4.1 | Tablepm1004CfgEmptyTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.18.9.4.1.1 | Rowpm1004CfgEmptyEntry | not-accessible | current | Row definition for the j0Client table |
| 1.3.6.1.4.1.20044.18.9.4.1.1.1 | Columnpm1004CfgEmptyIndex | read-only | current | Index definition for the empty table |
| 1.3.6.1.4.1.20044.18.9.4.1.1.3 | Columnpm1004CfgClientExpectJ0SetupPortn | read-write | current | Expected Trace Identifier mode :This register configures the Expected Trace Identifier Mode (single byte, 16 bytes with CRC7, 64 bytes with CRC7 or 64 bytes wi… |
| 1.3.6.1.4.1.20044.18.9.5 | Nodepm1004CfgLabels | |||
| 1.3.6.1.4.1.20044.18.9.5.1 | Tablepm1004CfgLabelclientTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.18.9.5.1.1 | Rowpm1004CfgLabelclientEntry | not-accessible | current | Row definition for the labels table |
| 1.3.6.1.4.1.20044.18.9.5.1.1.1 | Columnpm1004CfgLabelclientIndex | read-only | current | Index definition for the labelclient table |
| 1.3.6.1.4.1.20044.18.9.5.1.1.3 | Columnpm1004CfgLabelclientPortn | read-write | current | Default settings on the label of the Ports :These registers configures the default initialisation settings of the labels of the ports . |
| 1.3.6.1.4.1.20044.18.9.5.2 | Tablepm1004CfgLabellineTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.18.9.5.2.1 | Rowpm1004CfgLabellineEntry | not-accessible | current | Row definition for the labels table |
| 1.3.6.1.4.1.20044.18.9.5.2.1.1 | Columnpm1004CfgLabellineIndex | read-only | current | Index definition for the labelline table |
| 1.3.6.1.4.1.20044.18.9.5.2.1.3 | Columnpm1004CfgLabellinePortn | read-write | current | Default settings on the label of the lines :These registers configures the default initialisation settings of the labels of the lines . |
| 1.3.6.1.4.1.20044.18.9.6 | Nodepm1004CfgStartuptlh | |||
| 1.3.6.1.4.1.20044.18.9.6.1 | Tablepm1004CfgOtxtlhTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.18.9.6.1.1 | Rowpm1004CfgOtxtlhEntry | not-accessible | current | Row definition for the startuptlh table |
| 1.3.6.1.4.1.20044.18.9.6.1.1.1 | Columnpm1004CfgOtxtlhIndex | read-only | current | Index definition for the otxtlh table |
| 1.3.6.1.4.1.20044.18.9.6.1.1.3 | Columnpm1004CfgNuPortn | read-write | deprecated | : |
| 1.3.6.1.4.1.20044.18.9.6.1.1.4 | Columnpm1004CfgLineDitherRatePortn | read-write | current | Default Line OTX TLH FM amplitude :This register configures the start-up width of the frequency modulation of the Line OTX TLH |
| 1.3.6.1.4.1.20044.18.9.6.1.1.5 | Columnpm1004CfgLineDitherFhzPortn | read-write | current | Default Line OTX TLH FM frequency :This register configures the start-up frequency of the frequency modulation of the Line OTX TLH |
| 1.3.6.1.4.1.20044.18.9.6.1.1.6 | Columnpm1004CfgLinePwrLaserPortn | read-write | current | Defaut Line OTX TLH output Power :This register configures the start-up output power of the Line OTX TLH (Unit = dBm) |
| 1.3.6.1.4.1.20044.18.9.6.1.1.7 | Columnpm1004CfgLineFCurrentPortn | read-write | current | Default Line OTX TLH Channel :This register configures the start-up laser channel of the Line OTX TL H |
| 1.3.6.1.4.1.20044.18.9.6.1.1.8 | Columnpm1004CfgLineGridCurrentPortn | read-write | current | Default Line OTX TLH Grid :This register configures the start-up laser grid of the Line OTX TLH |
| 1.3.6.1.4.1.20044.18.9.6.1.1.9 | Columnpm1004CfgFPortn | read-write | current | Default Line OTX TLH lowest Freq :This register configures the start-up lowest frequency supported on the Line OTX TLH |
| 1.3.6.1.4.1.20044.18.9.6.1.1.10 | Columnpm1004CfgReservedPortn | read-write | deprecated | : |
| 1.3.6.1.4.1.20044.18.9.6.1.1.11 | Columnpm1004CfgLinePhotodiodeModePortn | read-write | current | Default Line OTX TLH APD mode :This register configures the start-up APD mode of the Line OTX TLH |
| 1.3.6.1.4.1.20044.18.9.6.1.1.12 | Columnpm1004CfgLinePhotodiodeValuePortn | read-write | current | Default Line OTX TLH APD atten. :This register configures the start-up APD attenuation on the Line OTX TLH |
| 1.3.6.1.4.1.20044.18.9.7 | Nodepm1004CfgStartuptablefive | |||
| 1.3.6.1.4.1.20044.18.9.7.1 | Tablepm1004CfgOtxtlhcapabilitiesTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.18.9.7.1.1 | Rowpm1004CfgOtxtlhcapabilitiesEntry | not-accessible | current | Row definition for the startuptablefive table |
| 1.3.6.1.4.1.20044.18.9.7.1.1.1 | Columnpm1004CfgOtxtlhcapabilitiesIndex | read-only | current | Index definition for the otxtlhcapabilities table |
| 1.3.6.1.4.1.20044.18.9.7.1.1.3 | Columnpm1004CfgComponentTypePortn | read-only | current | Component parameters :This OID defines the component parameter s |
| 1.3.6.1.4.1.20044.18.9.7.1.1.4 | Columnpm1004CfgMiscellaneousPortn | read-only | current | Miscellaneous default settings :This OID defines the miscellaneous parameters |
| 1.3.6.1.4.1.20044.18.9.7.1.1.5 | Columnpm1004CfgFirstChannelPortn | read-only | current | Number of the first channel of the component :This OID defines the first channel number of the PM |
| 1.3.6.1.4.1.20044.18.9.7.1.1.6 | Columnpm1004CfgLastChannelPortn | read-only | current | Number of the last channel of the component :This OID defines the last channel number of the PM |
| 1.3.6.1.4.1.20044.18.9.7.1.1.7 | Columnpm1004CfgGridPortn | read-only | current | Grid value of the component :This OID defines the grid of the PM |
| 1.3.6.1.4.1.20044.18.9.257 | Scalarpm1004CfgWriteConfiguration | read-write | current | Write configuration to module:This OID writes the complete configuration to the module |
| 1.3.6.1.4.1.20044.18.10 | Nodepm1004traps | |||
| 1.3.6.1.4.1.20044.18.10.2 | Scalarpm1004trapPortNumber | read-only | current | Last port which generates a trap |
| 1.3.6.1.4.1.20044.18.10.3 | Scalarpm1004trapLineNumber | read-only | current | Last Line which generates a trap |
| 1.3.6.1.4.1.20044.18.10.4 | Scalarpm1004trapBoardNumber | read-only | current | Last module which generates a trap |
| 1.3.6.1.4.1.20044.18.10.30 | Notificationpm1004LineTrapNotUrgentGoesOn | current | Not urgent Line default is activated | |
| 1.3.6.1.4.1.20044.18.10.31 | Notificationpm1004LineTrapNotUrgentGoesOff | current | Not urgent Line default disappeared | |
| 1.3.6.1.4.1.20044.18.10.32 | Notificationpm1004LineTrapUrgentGoesOn | current | Urgent Line default is activated | |
| 1.3.6.1.4.1.20044.18.10.33 | Notificationpm1004LineTrapUrgentGoesOff | current | Urgent Line default disappeared | |
| 1.3.6.1.4.1.20044.18.10.34 | Notificationpm1004LineTrapCritGoesOn | current | Critical Line default is activated | |
| 1.3.6.1.4.1.20044.18.10.35 | Notificationpm1004LineTrapCritGoesOff | current | Critical Line default disappeared | |
| 1.3.6.1.4.1.20044.18.10.40 | Notificationpm1004ClientTrapNotUrgentGoesOn | current | Not urgent client default is activated | |
| 1.3.6.1.4.1.20044.18.10.41 | Notificationpm1004ClientTrapNotUrgentGoesOff | current | Not urgent client default disappeared | |
| 1.3.6.1.4.1.20044.18.10.42 | Notificationpm1004ClientTrapUrgentGoesOn | current | Urgent client default is activated | |
| 1.3.6.1.4.1.20044.18.10.43 | Notificationpm1004ClientTrapUrgentGoesOff | current | Urgent client default disappeared | |
| 1.3.6.1.4.1.20044.18.10.44 | Notificationpm1004ClientTrapCritGoesOn | current | Critical client default is activated | |
| 1.3.6.1.4.1.20044.18.10.45 | Notificationpm1004ClientTrapCritGoesOff | current | Critical client default disappeared | |
| 1.3.6.1.4.1.20044.18.10.50 | Notificationpm1004PowerTrapUrgentGoesOn | current | Urgent power supply default is activated | |
| 1.3.6.1.4.1.20044.18.10.51 | Notificationpm1004PowerTrapUrgentGoesOff | current | Urgent power supply default disappeared | |
| 1.3.6.1.4.1.20044.18.11 | Nodepm1004Monitoring | |||
| 1.3.6.1.4.1.20044.18.11.1 | Nodepm1004MonOther | |||
| 1.3.6.1.4.1.20044.18.11.1.1 | Nodepm1004MonSync | |||
| 1.3.6.1.4.1.20044.18.11.1.1.257 | Scalarpm1004PerfEnable | read-write | current | Perf. Mon. Enable :This OID enables the Performance Monitoring applicatio n |
| 1.3.6.1.4.1.20044.18.11.1.1.258 | Scalarpm1004PerfSyncSource | read-write | current | Perf. Mon. Sync. Source :This OID selects the Synchronisation source for the Performance Monitoring application (internal of external ) |
| 1.3.6.1.4.1.20044.18.11.1.1.259 | Scalarpm1004Perf15minSync | read-write | current | Perf. Mon. 15-min sync. :This OID must be used in external synchronisation mode only to send a 15-min synchronisation command |
| 1.3.6.1.4.1.20044.18.11.1.1.260 | Scalarpm1004Perf24hSync | read-write | current | Perf. Mon. 24-hours sync. :This OID must be used in external synchronisation mode only to send a 24-hours synchronisation command |
| 1.3.6.1.4.1.20044.18.11.1.2 | Nodepm1004MonTimeStamp | |||
| 1.3.6.1.4.1.20044.18.11.1.2.5 | Scalarpm1004PerfCurrent15MinElapsedTime | read-write | current | Current 15min period Elapsed Time :This OID gives the number of seconds elapsed in the current 15-minutes period |
| 1.3.6.1.4.1.20044.18.11.1.2.6 | Scalarpm1004PerfCurrent24HoursElapsedTime | read-write | current | Current 24hours period Elapsed Time :This OID gives the number of seconds elapsed in the current 24-hours period |
| 1.3.6.1.4.1.20044.18.11.1.2.7 | Scalarpm1004PerfPast15MinElapsedTime | read-write | current | Past 15min period Elapsed Time :This OID gives the number of seconds elapsed in the past 15-minutes period |
| 1.3.6.1.4.1.20044.18.11.1.2.8 | Scalarpm1004PerfPast24HoursElapsedTime | read-write | current | Past 24hours period Elapsed Time :This OID gives the number of seconds elapsed in the past 24-hours perio d |
| 1.3.6.1.4.1.20044.18.11.2 | Nodepm1004MonClient | |||
| 1.3.6.1.4.1.20044.18.11.2.1 | Nodepm1004MonClientPerformance | |||
| 1.3.6.1.4.1.20044.18.11.2.1.16 | Tablepm1004PerfUpCurrent15CntTable | not-accessible | current | List of pm1004PerfUpCurrent15Cnt Article |
| 1.3.6.1.4.1.20044.18.11.2.1.16.1 | Rowpm1004PerfUpCurrent15CntEntry | not-accessible | current | Row definition for the pm1004PerfUpCurrent15Cnt table |
| 1.3.6.1.4.1.20044.18.11.2.1.16.1.1 | Columnpm1004PerfUpCurrent15CntIndex | read-only | current | Index definition for the pm1004PerfUpCurrent15Cnt table |
| 1.3.6.1.4.1.20044.18.11.2.1.16.1.2 | Columnpm1004PerfUpCurrent15CntInvCvPortn | read-only | current | Current 15-min CV counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.18.11.2.1.16.1.3 | Columnpm1004PerfUpCurrent15CntCvValuePortn | read-only | current | Current 15-min CV counter :This OID gives the current 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.18.11.2.1.16.1.4 | Columnpm1004PerfUpCurrent15CntInvEsPortn | read-only | current | Current 15-min ES counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.18.11.2.1.16.1.5 | Columnpm1004PerfUpCurrent15CntEsValuePortn | read-only | current | Current 15-min ES counter :This OID gives the current 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.18.11.2.1.16.1.6 | Columnpm1004PerfUpCurrent15CntInvSesPortn | read-only | current | Current 15-min SES counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.18.11.2.1.16.1.7 | Columnpm1004PerfUpCurrent15CntSesValuePortn | read-only | current | Current 15-min SES counter :This OID gives the current 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.18.11.2.1.16.1.8 | Columnpm1004PerfUpCurrent15CntInvSefsPortn | read-only | current | Current 15-min SEFS counter inv. :This OID indicates that the current 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.18.11.2.1.16.1.9 | Columnpm1004PerfUpCurrent15CntSefsValuePortn | read-only | current | Current 15-min SEFS counter :This OID gives the current 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.18.11.2.1.16.1.10 | Columnpm1004PerfUpCurrent15CntInvUasPortn | read-only | current | Current 15-min UAS counter inv. :This OID indicates that the current 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.18.11.2.1.16.1.11 | Columnpm1004PerfUpCurrent15CntUasValuePortn | read-only | current | Current 15-min UAS counter :This OID gives the current 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.18.11.2.1.24 | Tablepm1004PerfUpPast15CntTable | not-accessible | current | List of pm1004PerfUpPast15Cnt Article |
| 1.3.6.1.4.1.20044.18.11.2.1.24.1 | Rowpm1004PerfUpPast15CntEntry | not-accessible | current | Row definition for the pm1004PerfUpPast15Cnt table |
| 1.3.6.1.4.1.20044.18.11.2.1.24.1.1 | Columnpm1004PerfUpPast15CntIndex | read-only | current | Index definition for the pm1004PerfUpPast15Cnt table |
| 1.3.6.1.4.1.20044.18.11.2.1.24.1.2 | Columnpm1004PerfUpPast15CntInvCvPortn | read-only | current | Previous 15-min CV counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.18.11.2.1.24.1.3 | Columnpm1004PerfUpPast15CntCvValuePortn | read-only | current | Previous 15-min CV counter :This OID gives the previous 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.18.11.2.1.24.1.4 | Columnpm1004PerfUpPast15CntInvEsPortn | read-only | current | Previous 15-min ES counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.18.11.2.1.24.1.5 | Columnpm1004PerfUpPast15CntEsValuePortn | read-only | current | Previous 15-min ES counter :This OID gives the previous 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.18.11.2.1.24.1.6 | Columnpm1004PerfUpPast15CntInvSesPortn | read-only | current | Previous 15-min SES counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.18.11.2.1.24.1.7 | Columnpm1004PerfUpPast15CntSesValuePortn | read-only | current | Previous 15-min SES counter :This OID gives the previous 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.18.11.2.1.24.1.8 | Columnpm1004PerfUpPast15CntInvSefsPortn | read-only | current | Previous 15-min SEFS counter inv. :This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.18.11.2.1.24.1.9 | Columnpm1004PerfUpPast15CntSefsValuePortn | read-only | current | Previous 15-min SEFS counter :This OID gives the previous 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.18.11.2.1.24.1.10 | Columnpm1004PerfUpPast15CntInvUasPortn | read-only | current | Previous 15-min UAS counter inv. :This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.18.11.2.1.24.1.11 | Columnpm1004PerfUpPast15CntUasValuePortn | read-only | current | Previous 15-min UAS counter :This OID gives the previous 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.18.11.2.1.32 | Tablepm1004PerfUpCurrent24CntTable | not-accessible | current | List of pm1004PerfUpCurrent24Cnt Article |
| 1.3.6.1.4.1.20044.18.11.2.1.32.1 | Rowpm1004PerfUpCurrent24CntEntry | not-accessible | current | Row definition for the pm1004PerfUpCurrent24Cnt table |
| 1.3.6.1.4.1.20044.18.11.2.1.32.1.1 | Columnpm1004PerfUpCurrent24CntIndex | read-only | current | Index definition for the pm1004PerfUpCurrent24Cnt table |
| 1.3.6.1.4.1.20044.18.11.2.1.32.1.2 | Columnpm1004PerfUpCurrent24CntInvCvPortn | read-only | current | Current 24-hours CV counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.18.11.2.1.32.1.3 | Columnpm1004PerfUpCurrent24CntCvValuePortn | read-only | current | Current 24-hours CV counter :This OID gives the current 24-hours Coding Violation counter valu e |
| 1.3.6.1.4.1.20044.18.11.2.1.32.1.4 | Columnpm1004PerfUpCurrent24CntInvEsPortn | read-only | current | Current 24-hours ES counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.18.11.2.1.32.1.5 | Columnpm1004PerfUpCurrent24CntEsValuePortn | read-only | current | Current 24-hours ES counter :This OID gives the current 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.18.11.2.1.32.1.6 | Columnpm1004PerfUpCurrent24CntInvSesPortn | read-only | current | Current 24-hours SES counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.18.11.2.1.32.1.7 | Columnpm1004PerfUpCurrent24CntSesValuePortn | read-only | current | Current 24-hours SES counter :This OID gives the current 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.18.11.2.1.32.1.8 | Columnpm1004PerfUpCurrent24CntInvSefsPortn | read-only | current | Current 24-hours SEFS counter inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.18.11.2.1.32.1.9 | Columnpm1004PerfUpCurrent24CntSefsValuePortn | read-only | current | Current 24-hours SEFS counter :This OID gives the current 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.18.11.2.1.32.1.10 | Columnpm1004PerfUpCurrent24CntInvUasPortn | read-only | current | Current 24-hours UAS counter inv. :This OID indicates that the current 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.18.11.2.1.32.1.11 | Columnpm1004PerfUpCurrent24CntUasValuePortn | read-only | current | Current 24-hours UAS counter :This OID gives the current 24-hours UnAvailable Second counter valu e |
| 1.3.6.1.4.1.20044.18.11.2.1.40 | Tablepm1004PerfUpPast24CntTable | not-accessible | current | List of pm1004PerfUpPast24Cnt Article |
| 1.3.6.1.4.1.20044.18.11.2.1.40.1 | Rowpm1004PerfUpPast24CntEntry | not-accessible | current | Row definition for the pm1004PerfUpPast24Cnt table |
| 1.3.6.1.4.1.20044.18.11.2.1.40.1.1 | Columnpm1004PerfUpPast24CntIndex | read-only | current | Index definition for the pm1004PerfUpPast24Cnt table |
| 1.3.6.1.4.1.20044.18.11.2.1.40.1.2 | Columnpm1004PerfUpPast24CntInvCvPortn | read-only | current | Previous 24-hours CV counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.18.11.2.1.40.1.3 | Columnpm1004PerfUpPast24CntCvValuePortn | read-only | current | Previous 24-hours CV counter :This OID gives the previous 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.18.11.2.1.40.1.4 | Columnpm1004PerfUpPast24CntInvEsPortn | read-only | current | Previous 24-hours ES counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.18.11.2.1.40.1.5 | Columnpm1004PerfUpPast24CntEsValuePortn | read-only | current | Previous 24-hours ES counter :This OID gives the previous 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.18.11.2.1.40.1.6 | Columnpm1004PerfUpPast24CntInvSesPortn | read-only | current | Previous 24-hours SES counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invali d |
| 1.3.6.1.4.1.20044.18.11.2.1.40.1.7 | Columnpm1004PerfUpPast24CntSesValuePortn | read-only | current | Previous 24-hours SES counter :This OID gives the previous 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.18.11.2.1.40.1.8 | Columnpm1004PerfUpPast24CntInvSefsPortn | read-only | current | Previous 24-hours SEFS counter inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invali d |
| 1.3.6.1.4.1.20044.18.11.2.1.40.1.9 | Columnpm1004PerfUpPast24CntSefsValuePortn | read-only | current | Previous 24-hours SEFS counter :This OID gives the previous 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.18.11.2.1.40.1.10 | Columnpm1004PerfUpPast24CntInvUasPortn | read-only | current | Previous 24-hours UAS counter inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.18.11.2.1.40.1.11 | Columnpm1004PerfUpPast24CntUasValuePortn | read-only | current | Previous 24-hours UAS counter :This OID gives the previous 24-hours UnAvailable Second counter valu e |
| 1.3.6.1.4.1.20044.18.11.2.2 | Nodepm1004MonClientTraceIdentifier | |||
| 1.3.6.1.4.1.20044.18.11.2.2.2112 | Tablepm1004Almj0AlarmTable | not-accessible | current | List of pm1004Almj0Alarm Articl e |
| 1.3.6.1.4.1.20044.18.11.2.2.2112.1 | Rowpm1004Almj0AlarmEntry | not-accessible | current | Row definition for the pm1004Almj0Alarm table |
| 1.3.6.1.4.1.20044.18.11.2.2.2112.1.1 | Columnpm1004Almj0AlarmIndex | read-only | current | Index definition for the pm1004Almj0Alarm table |
| 1.3.6.1.4.1.20044.18.11.2.2.2112.1.2 | Columnpm1004AlmJ0TimAlarmPortn | read-only | current | Trace Identifier Mismatch :This OID indicates a Trace Identifier Mismatch has been detected on the client input stream <Condtype> J0_TIM_ALARM_1 <Probcause> ot… |
| 1.3.6.1.4.1.20044.18.11.2.2.2112.1.3 | Columnpm1004AlmJ0TiiAlarmPortn | read-only | current | Trace Identifier Unstable :This OID indicates the Trace Identifier is unstable on the client input stream <Condtype> J0_TII_ALARM_1 <Probcause> other (1) <Alar… |
| 1.3.6.1.4.1.20044.18.11.2.2.2112.1.4 | Columnpm1004AlmCrc7ErrorPortn | read-only | current | CRC Error On Trace Identifier :This OID indicates that a CRC error has been detected in the stable Trace Identifier on the client input stream <Condtype> CRC7_… |
| 1.3.6.1.4.1.20044.18.11.3 | Nodepm1004MonLine | |||
| 1.3.6.1.4.1.20044.18.11.3.1 | Nodepm1004MonLinePerformance | |||
| 1.3.6.1.4.1.20044.18.11.3.1.128 | Tablepm1004PerfLineCurrent15CntTable | not-accessible | current | List of pm1004PerfLineCurrent15Cnt Article |
| 1.3.6.1.4.1.20044.18.11.3.1.128.1 | Rowpm1004PerfLineCurrent15CntEntry | not-accessible | current | Row definition for the pm1004PerfLineCurrent15Cnt table |
| 1.3.6.1.4.1.20044.18.11.3.1.128.1.1 | Columnpm1004PerfLineCurrent15CntIndex | read-only | current | Index definition for the pm1004PerfLineCurrent15Cnt table |
| 1.3.6.1.4.1.20044.18.11.3.1.128.1.2 | Columnpm1004PerfLineCurrent15CntInvCvPortn | read-only | current | Current 15-min CV counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.18.11.3.1.128.1.3 | Columnpm1004PerfLineCurrent15CntCvValuePortn | read-only | current | Current 15-min CV counter :This OID gives the current 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.18.11.3.1.128.1.4 | Columnpm1004PerfLineCurrent15CntInvEsPortn | read-only | current | Current 15-min ES counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.18.11.3.1.128.1.5 | Columnpm1004PerfLineCurrent15CntEsValuePortn | read-only | current | Current 15-min ES counter :This OID gives the current 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.18.11.3.1.128.1.6 | Columnpm1004PerfLineCurrent15CntInvSesPortn | read-only | current | Current 15-min SES counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.18.11.3.1.128.1.7 | Columnpm1004PerfLineCurrent15CntSesValuePortn | read-only | current | Current 15-min SES counter :This OID gives the current 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.18.11.3.1.128.1.8 | Columnpm1004PerfLineCurrent15CntInvSefsPortn | read-only | current | Current 15-min SEFS counter inv. :This OID indicates that the current 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.18.11.3.1.128.1.9 | Columnpm1004PerfLineCurrent15CntSefsValuePortn | read-only | current | Current 15-min SEFS counter :This OID gives the current 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.18.11.3.1.128.1.10 | Columnpm1004PerfLineCurrent15CntInvUasPortn | read-only | current | Current 15-min UAS counter inv. :This OID indicates that the current 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.18.11.3.1.128.1.11 | Columnpm1004PerfLineCurrent15CntUasValuePortn | read-only | current | Current 15-min UAS counter :This OID gives the current 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.18.11.3.1.129 | Tablepm1004PerfLinePast15CntTable | not-accessible | current | List of pm1004PerfLinePast15Cnt Article |
| 1.3.6.1.4.1.20044.18.11.3.1.129.1 | Rowpm1004PerfLinePast15CntEntry | not-accessible | current | Row definition for the pm1004PerfLinePast15Cnt table |
| 1.3.6.1.4.1.20044.18.11.3.1.129.1.1 | Columnpm1004PerfLinePast15CntIndex | read-only | current | Index definition for the pm1004PerfLinePast15Cnt table |
| 1.3.6.1.4.1.20044.18.11.3.1.129.1.2 | Columnpm1004PerfLinePast15CntInvCvPortn | read-only | current | Previous 15-min CV counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.18.11.3.1.129.1.3 | Columnpm1004PerfLinePast15CntCvValuePortn | read-only | current | Previous 15-min CV counter :This OID gives the previous 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.18.11.3.1.129.1.4 | Columnpm1004PerfLinePast15CntInvEsPortn | read-only | current | Previous 15-min ES counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.18.11.3.1.129.1.5 | Columnpm1004PerfLinePast15CntEsValuePortn | read-only | current | Previous 15-min ES counter :This OID gives the previous 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.18.11.3.1.129.1.6 | Columnpm1004PerfLinePast15CntInvSesPortn | read-only | current | Previous 15-min SES counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.18.11.3.1.129.1.7 | Columnpm1004PerfLinePast15CntSesValuePortn | read-only | current | Previous 15-min SES counter :This OID gives the previous 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.18.11.3.1.129.1.8 | Columnpm1004PerfLinePast15CntInvSefsPortn | read-only | current | Previous 15-min SEFS counter inv. :This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.18.11.3.1.129.1.9 | Columnpm1004PerfLinePast15CntSefsValuePortn | read-only | current | Previous 15-min SEFS counter :This OID gives the previous 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.18.11.3.1.129.1.10 | Columnpm1004PerfLinePast15CntInvUasPortn | read-only | current | Previous 15-min UAS counter inv. :This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.18.11.3.1.129.1.11 | Columnpm1004PerfLinePast15CntUasValuePortn | read-only | current | Previous 15-min UAS counter :This OID gives the previous 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.18.11.3.1.130 | Tablepm1004PerfLineCurrent24CntTable | not-accessible | current | List of pm1004PerfLineCurrent24Cnt Article |
| 1.3.6.1.4.1.20044.18.11.3.1.130.1 | Rowpm1004PerfLineCurrent24CntEntry | not-accessible | current | Row definition for the pm1004PerfLineCurrent24Cnt table |
| 1.3.6.1.4.1.20044.18.11.3.1.130.1.1 | Columnpm1004PerfLineCurrent24CntIndex | read-only | current | Index definition for the pm1004PerfLineCurrent24Cnt table |
| 1.3.6.1.4.1.20044.18.11.3.1.130.1.2 | Columnpm1004PerfLineCurrent24CntInvCvPortn | read-only | current | Current 24-hours CV counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.18.11.3.1.130.1.3 | Columnpm1004PerfLineCurrent24CntCvValuePortn | read-only | current | Current 24-hours CV counter :This OID gives the current 24-hours Coding Violation counter valu e |
| 1.3.6.1.4.1.20044.18.11.3.1.130.1.4 | Columnpm1004PerfLineCurrent24CntInvEsPortn | read-only | current | Current 24-hours ES counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.18.11.3.1.130.1.5 | Columnpm1004PerfLineCurrent24CntEsValuePortn | read-only | current | Current 24-hours ES counter :This OID gives the current 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.18.11.3.1.130.1.6 | Columnpm1004PerfLineCurrent24CntInvSesPortn | read-only | current | Current 24-hours SES counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.18.11.3.1.130.1.7 | Columnpm1004PerfLineCurrent24CntSesValuePortn | read-only | current | Current 24-hours SES counter :This OID gives the current 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.18.11.3.1.130.1.8 | Columnpm1004PerfLineCurrent24CntInvSefsPortn | read-only | current | Current 24-hours SEFS counter inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.18.11.3.1.130.1.9 | Columnpm1004PerfLineCurrent24CntSefsValuePortn | read-only | current | Current 24-hours SEFS counter :This OID gives the current 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.18.11.3.1.130.1.10 | Columnpm1004PerfLineCurrent24CntInvUasPortn | read-only | current | Current 24-hours UAS counter inv. :This OID indicates that the current 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.18.11.3.1.130.1.11 | Columnpm1004PerfLineCurrent24CntUasValuePortn | read-only | current | Current 24-hours UAS counter :This OID gives the current 24-hours UnAvailable Second counter valu e |
| 1.3.6.1.4.1.20044.18.11.3.1.131 | Tablepm1004PerfLinePast24CntTable | not-accessible | current | List of pm1004PerfLinePast24Cnt Article |
| 1.3.6.1.4.1.20044.18.11.3.1.131.1 | Rowpm1004PerfLinePast24CntEntry | not-accessible | current | Row definition for the pm1004PerfLinePast24Cnt table |
| 1.3.6.1.4.1.20044.18.11.3.1.131.1.1 | Columnpm1004PerfLinePast24CntIndex | read-only | current | Index definition for the pm1004PerfLinePast24Cnt table |
| 1.3.6.1.4.1.20044.18.11.3.1.131.1.2 | Columnpm1004PerfLinePast24CntInvCvPortn | read-only | current | Previous 24-hours CV counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.18.11.3.1.131.1.3 | Columnpm1004PerfLinePast24CntCvValuePortn | read-only | current | Previous 24-hours CV counter :This OID gives the previous 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.18.11.3.1.131.1.4 | Columnpm1004PerfLinePast24CntInvEsPortn | read-only | current | Previous 24-hours ES counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.18.11.3.1.131.1.5 | Columnpm1004PerfLinePast24CntEsValuePortn | read-only | current | Previous 24-hours ES counter :This OID gives the previous 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.18.11.3.1.131.1.6 | Columnpm1004PerfLinePast24CntInvSesPortn | read-only | current | Previous 24-hours SES counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invali d |
| 1.3.6.1.4.1.20044.18.11.3.1.131.1.7 | Columnpm1004PerfLinePast24CntSesValuePortn | read-only | current | Previous 24-hours SES counter :This OID gives the previous 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.18.11.3.1.131.1.8 | Columnpm1004PerfLinePast24CntInvSefsPortn | read-only | current | Previous 24-hours SEFS counter inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invali d |
| 1.3.6.1.4.1.20044.18.11.3.1.131.1.9 | Columnpm1004PerfLinePast24CntSefsValuePortn | read-only | current | Previous 24-hours SEFS counter :This OID gives the previous 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.18.11.3.1.131.1.10 | Columnpm1004PerfLinePast24CntInvUasPortn | read-only | current | Previous 24-hours UAS counter inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.18.11.3.1.131.1.11 | Columnpm1004PerfLinePast24CntUasValuePortn | read-only | current | Previous 24-hours UAS counter :This OID gives the previous 24-hours UnAvailable Second counter valu e |
| 1.3.6.1.4.1.20044.18.11.3.2 | Nodepm1004MonLineTraceIdentifier |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Pm1004AdjustValue | INTEGER { otxadjustvalue0(0), otxadjustvalue1(1), otxadjustvalue2(2), otxadjustvalue3(3), otxadjustvalue4(4), otxadjustvalue5(5), otxadjustvalue6(6), otxadjustvalue7(7), otxadjustvalue8(8), otxadjustvalue9(9), otxadjustvalue10(10) } | current | Different values in Adjust mode on OTX-TLH on line ports |
| Pm1004OtxChannel | INTEGER | current | Channel selection on OTX-TLH on line ports |
| Pm1004OtxGrid | INTEGER { otxgrid200(200), otxgrid100(100), otxgrid50(50) } | current | Different grids on OTX-TLH on line ports |
| Pm1004OtxMode | INTEGER { otx80mode(1), otx60mode(2), otxadjustmode(4) } | current | Different modes on OTX-TLH on line ports |