EKINOPS-Pm1004dcp-MIB
749 objects
MIB for managing Ekinops modules with PM1004DC software
Imported Objects
| EKINOPS-MIB | EkiApiState EkiMeasureType EkiMode ekinops EkiOnOff EkiProtocol EkiState EkiSynchroMode |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.20044.37 | IdentitymodulePm1004dcp | MIB for managing Ekinops modules with PM1004DC software | ||
| 1.3.6.1.4.1.20044.37.2 | Nodepm1004dcpalarms | |||
| 1.3.6.1.4.1.20044.37.2.1 | Nodepm1004dcpAlmOther | |||
| 1.3.6.1.4.1.20044.37.2.1.1 | Nodepm1004dcpAlmOtherNurg | |||
| 1.3.6.1.4.1.20044.37.2.1.1.2 | Nodepm1004dcpAlmsynthAlm2 | |||
| 1.3.6.1.4.1.20044.37.2.1.1.2.1 | Scalarpm1004dcpAlmConfTableSave | read-only | current | PM Configuration Save :This OID is at 1 during the saving of a new configuration table in the module Flash memory. <Condtype> CONF_TABLE_SAVE <Probcause> other… |
| 1.3.6.1.4.1.20044.37.2.1.1.2.2 | Scalarpm1004dcpAlmInvUpload | read-only | current | Inventory Upload :This OID is at 1 during the uploading of PM inventory information. <Condtype> INV_UPLOAD <Probcause> other (1) <Alarmtype> other (1) <Polarit… |
| 1.3.6.1.4.1.20044.37.2.1.1.2.3 | Scalarpm1004dcpAlmConfTableLoad | read-only | current | PM Configuration Load :This OID is at 1 during the loading of configuration tables in the modules RAM. <Condtype> CONF_TABLE_LOAD <Probcause> other (1) <Alarmt… |
| 1.3.6.1.4.1.20044.37.2.1.1.2.4 | Scalarpm1004dcpAlmCorrelatOff | read-only | current | Not Used :This OID, when set, indicates that alarm correlation is not being performed. <Condtype> CORRELAT_OFF <Probcause> other (1) <Alarmtype> other (1) <Pol… |
| 1.3.6.1.4.1.20044.37.2.1.1.2.5 | Scalarpm1004dcpAlmMaintenanceOn | read-only | current | Maintenance Mode :This OID indicates that the PM is in maintenance mode. <Help> This alarm indicates that the maintenance mode is enabled on the PM <Condtype> … |
| 1.3.6.1.4.1.20044.37.2.1.2 | Nodepm1004dcpAlmOtherUrg | |||
| 1.3.6.1.4.1.20044.37.2.1.2.194 | Nodepm1004dcpAlmmodInitFailLevel2 | |||
| 1.3.6.1.4.1.20044.37.2.1.2.194.1 | Scalarpm1004dcpAlmLedFail | read-only | current | Led Fail :This OID indicates that Led register has not been correctly initalized <Help> This alarm indicates if the module LEDs are correctly initialized <Cond… |
| 1.3.6.1.4.1.20044.37.2.1.2.194.2 | Scalarpm1004dcpAlmNextColdBootForced | read-only | current | Next Cold Boot Forced :This OID indicates that the next Reset will be forced Cold <Help> This alarm indicates that the next reset of the module will be forced … |
| 1.3.6.1.4.1.20044.37.2.1.2.194.3 | Scalarpm1004dcpAlmBootUndone | read-only | current | Boot Undone :This OID indicates that the boot has not been correctly achieved <Help> This alarm indicates if the module has correctly boot <Condtype> BOOT_UNDO… |
| 1.3.6.1.4.1.20044.37.2.1.2.194.4 | Scalarpm1004dcpAlmResetHwInitFail | read-only | current | Reset HW Init Fail :This OID indicates that the HW intialization has caused unknown intial conditions <Help> This alarm indicates if the HW has been correctly … |
| 1.3.6.1.4.1.20044.37.2.1.2.194.5 | Scalarpm1004dcpAlmSwInitFail | read-only | current | SW Init Fail :This OID indicates that the SW intialization has caused unknown intial conditions <Help> This alarm indicates if the SW module is correctly initi… |
| 1.3.6.1.4.1.20044.37.2.1.2.195 | Nodepm1004dcpAlmmodInitFailLevel3 | |||
| 1.3.6.1.4.1.20044.37.2.1.2.195.1 | Scalarpm1004dcpAlmGwIdentFail | read-only | current | GW Ident Fail :This OID indicates that GW identification has not been read <Help> This alarm indicates if the GW has been correctly identified <Condtype> GW_ID… |
| 1.3.6.1.4.1.20044.37.2.1.2.195.2 | Scalarpm1004dcpAlmObmTypeReadFail | read-only | current | OBM Type Read Fail :This OID indicates that OBM type has not been recognized <Help> This alarm indicates if the OBM board has been correctly identified <Condty… |
| 1.3.6.1.4.1.20044.37.2.1.2.195.3 | Scalarpm1004dcpAlmInitModuleFail | read-only | current | Init Module Fail :This OID indicates that the Module has not been correctly initialized <Help> This alarm indicates if the SW module is correctly initialized <… |
| 1.3.6.1.4.1.20044.37.2.1.2.195.5 | Scalarpm1004dcpAlmXfp1InitFail | read-only | current | XFP1 Init Fail :This OID indicates that the XFP has not been correctly initialized <Help> This alarm indicates if the line transceiver 1 is correctly initializ… |
| 1.3.6.1.4.1.20044.37.2.1.2.195.6 | Scalarpm1004dcpAlmXfp2InitFail | read-only | current | XFP2 Init Fail :This OID indicates that the XFP has not been correctly initialized <Help> This alarm indicates if the line transceiver 2 is correctly initializ… |
| 1.3.6.1.4.1.20044.37.2.1.2.195.7 | Scalarpm1004dcpAlmLine1InitFail | read-only | current | Line1 Init Fail :This OID indicates that the Line registersvsubset has not been correctly initialized <Help> This alarm indicates if the line port 1 is correct… |
| 1.3.6.1.4.1.20044.37.2.1.2.195.8 | Scalarpm1004dcpAlmLine2InitFail | read-only | current | Line2 Init Fail :This OID indicates that the Line register subset has not been correctly initialized <Help> This alarm indicates if the line port 2 is correctl… |
| 1.3.6.1.4.1.20044.37.2.1.2.195.9 | Scalarpm1004dcpAlmClient1InitFail | read-only | current | Client1 Init Fail :This OID indicates that Client 1 registers subset has not been correctly initialized <Help> This alarm indicates if the client port 1 is cor… |
| 1.3.6.1.4.1.20044.37.2.1.2.195.10 | Scalarpm1004dcpAlmClient2InitFail | read-only | current | Client2 Init Fail :This OID indicates that Client 2 registers subset has not been correctly initialized <Help> This alarm indicates if the client port 2 is cor… |
| 1.3.6.1.4.1.20044.37.2.1.2.195.11 | Scalarpm1004dcpAlmClient3InitFail | read-only | current | Client3 Init Fail :This OID indicates that Client 3 registers subset has not been correctly initialized <Help> This alarm indicates if the client port 3 is cor… |
| 1.3.6.1.4.1.20044.37.2.1.2.195.12 | Scalarpm1004dcpAlmClient4InitFail | read-only | current | Client4 Init Fail :This OID indicates that Client 4 registers subset has not been correctly initialized <Help> This alarm indicates if the client port 4 is cor… |
| 1.3.6.1.4.1.20044.37.2.1.2.198 | Nodepm1004dcpAlmadddropTsClientRxProt | |||
| 1.3.6.1.4.1.20044.37.2.1.2.198.1 | Scalarpm1004dcpAlmAdddropClient1West | read-only | current | Client 1 West Rx Side Active :This OID indicates the Client #1 is active on West receiving side <Condtype> ADDDROP_CLIENT1_WEST <Probcause> other (1) <Alarmtyp… |
| 1.3.6.1.4.1.20044.37.2.1.2.198.2 | Scalarpm1004dcpAlmAdddropClient2West | read-only | current | Client 2 West Rx Side Active :This OID indicates the Client #2 is active on West receiving side <Condtype> ADDDROP_CLIENT2_WEST <Probcause> other (1) <Alarmtyp… |
| 1.3.6.1.4.1.20044.37.2.1.2.198.3 | Scalarpm1004dcpAlmAdddropClient3West | read-only | current | Client 3 West Rx Side Active :This OID indicates the Client #3 is active on West receiving side <Condtype> ADDDROP_CLIENT3_WEST <Probcause> other (1) <Alarmtyp… |
| 1.3.6.1.4.1.20044.37.2.1.2.198.4 | Scalarpm1004dcpAlmAdddropClient4West | read-only | current | Client 4 West Rx Side Active :This OID indicates the Client #4 is active on West receiving side <Condtype> ADDDROP_CLIENT4_WEST <Probcause> other (1) <Alarmtyp… |
| 1.3.6.1.4.1.20044.37.2.1.2.198.9 | Scalarpm1004dcpAlmAdddropClient1East | read-only | current | Client 1 East Rx Side Active :This OID indicates the Client #1 is active on East receiving side <Condtype> ADDDROP_CLIENT1_EAST <Probcause> other (1) <Alarmtyp… |
| 1.3.6.1.4.1.20044.37.2.1.2.198.10 | Scalarpm1004dcpAlmAdddropClient2East | read-only | current | Client 2 East Rx Side Active :This OID indicates the Client #2 is active on East receiving side <Condtype> ADDDROP_CLIENT2_EAST <Probcause> other (1) <Alarmtyp… |
| 1.3.6.1.4.1.20044.37.2.1.2.198.11 | Scalarpm1004dcpAlmAdddropClient3East | read-only | current | Client 3 East Rx Side Active :This OID indicates the Client #3 is active on East receiving side <Condtype> ADDDROP_CLIENT3_EAST <Probcause> other (1) <Alarmtyp… |
| 1.3.6.1.4.1.20044.37.2.1.2.198.12 | Scalarpm1004dcpAlmAdddropClient4East | read-only | current | Client 4 East Rx Side Active :This OID indicates the Client #4 is active on East receiving side <Condtype> ADDDROP_CLIENT4_EAST <Probcause> other (1) <Alarmtyp… |
| 1.3.6.1.4.1.20044.37.2.1.3 | Nodepm1004dcpAlmOtherCrit | |||
| 1.3.6.1.4.1.20044.37.2.1.3.0 | Nodepm1004dcpAlmsynthAlm0 | |||
| 1.3.6.1.4.1.20044.37.2.1.3.0.9 | Scalarpm1004dcpAlmModGlobFail | read-only | current | Module Failure :This OID is set on detection of a failure originating from the PM <Condtype> MOD_GLOB_FAIL <Probcause> equipmentMalfunction (16) <Alarmtype> sy… |
| 1.3.6.1.4.1.20044.37.2.1.3.0.15 | Scalarpm1004dcpAlmDefFuseA | read-only | current | Fuse A Fail :This OID indicates that the fuse of the power input A is in fail condition <Help> Status of the Fuse A <Condtype> DEF_FUSE_A <Probcause> powerProb… |
| 1.3.6.1.4.1.20044.37.2.1.3.0.16 | Scalarpm1004dcpAlmDefFuseB | read-only | current | Fuse B Fail :This OID indicates that the fuse of the power input B is in fail condition <Help> Status of the Fuse B <Condtype> DEF_FUSE_B <Probcause> powerProb… |
| 1.3.6.1.4.1.20044.37.2.2 | Nodepm1004dcpAlmClient | |||
| 1.3.6.1.4.1.20044.37.2.2.1 | Nodepm1004dcpAlmClientNurg | |||
| 1.3.6.1.4.1.20044.37.2.2.1.48 | Tablepm1004dcpAlmsfpWarnDdmTable | not-accessible | current | List of pm1004dcpAlmsfpWarnDdm Article |
| 1.3.6.1.4.1.20044.37.2.2.1.48.1 | Rowpm1004dcpAlmsfpWarnDdmEntry | not-accessible | current | Row definition for the pm1004dcpAlmsfpWarnDdm table |
| 1.3.6.1.4.1.20044.37.2.2.1.48.1.1 | Columnpm1004dcpAlmsfpWarnDdmIndex | read-only | current | Index definition for the pm1004dcpAlmsfpWarnDdm table |
| 1.3.6.1.4.1.20044.37.2.2.1.48.1.2 | Columnpm1004dcpAlmTxPwLowWngPortn | read-only | current | Client SFP Tx Power Low Warning :Warning indicating that the SFP output power of port is lower than the threshold value written in the SFP EEPROM <Condtype> TX… |
| 1.3.6.1.4.1.20044.37.2.2.1.48.1.3 | Columnpm1004dcpAlmTxPwrHighWngPortn | read-only | current | Client SFP Tx Power High Warning :Warning indicating that the SFP output power of port is higher than the threshold value written in the SFP EEPROM <Condtype> … |
| 1.3.6.1.4.1.20044.37.2.2.1.48.1.4 | Columnpm1004dcpAlmTxBiasLowWngPortn | read-only | current | Client SFP Bias Low Warning :Warning indicating that the SFP laser bias current of port is lower than the threshold value written in the SFP EEPROM <Condtype> … |
| 1.3.6.1.4.1.20044.37.2.2.1.48.1.5 | Columnpm1004dcpAlmTxBiasHighWngPortn | read-only | current | Client SFP Bias High Warning :Warning indicating that the SFP laser bias current of port is higher than the threshold value written in the SFP EEPROM <Condtype… |
| 1.3.6.1.4.1.20044.37.2.2.1.48.1.6 | Columnpm1004dcpAlmVccLowWngPortn | read-only | current | Client SFP Power Supply Low Warning :Warning indicating that the SFP power supply of port is lower than the threshold value written in the SFP EEPROM <Condtype… |
| 1.3.6.1.4.1.20044.37.2.2.1.48.1.7 | Columnpm1004dcpAlmVccHighWngPortn | read-only | current | Client SFP Power Supply High Warning :Warning indicating that the SFP power supply of port is higher than the threshold value written in the SFP EEPROM <Condty… |
| 1.3.6.1.4.1.20044.37.2.2.1.48.1.8 | Columnpm1004dcpAlmTempLowWngPortn | read-only | current | Client SFP Temp Low Warning :Warning indicating that the SFP temperature of port is lower than the threshold value written in the SFP EEPROM <Condtype> TEMP_LO… |
| 1.3.6.1.4.1.20044.37.2.2.1.48.1.9 | Columnpm1004dcpAlmTempHighWngPortn | read-only | current | Client SFP Temp High Warning :Warning indicating that the SFP temperature of port is higher than the threshold value written in the SFP EEPROM <Condtype> TEMP_… |
| 1.3.6.1.4.1.20044.37.2.2.1.48.1.16 | Columnpm1004dcpAlmRxPwrLowWngPortn | read-only | current | Client SFP Rx Power Low Warning :Warning indicating that the SFP input power of port is lower than the threshold value written in the SFP EEPROM <Condtype> RX_… |
| 1.3.6.1.4.1.20044.37.2.2.1.48.1.17 | Columnpm1004dcpAlmRxPwrHighWngPortn | read-only | current | Client SFP Rx Power High Warning :Warning indicating that the SFP input power of port is higher than the threshold value written in the SFP EEPROM <Condtype> R… |
| 1.3.6.1.4.1.20044.37.2.2.1.96 | Tablepm1004dcpAlmk1K2ClientTable | not-accessible | current | List of pm1004dcpAlmk1K2Client Article |
| 1.3.6.1.4.1.20044.37.2.2.1.96.1 | Rowpm1004dcpAlmk1K2ClientEntry | not-accessible | current | Row definition for the pm1004dcpAlmk1K2Client table |
| 1.3.6.1.4.1.20044.37.2.2.1.96.1.1 | Columnpm1004dcpAlmk1K2ClientIndex | read-only | current | Index definition for the pm1004dcpAlmk1K2Client table |
| 1.3.6.1.4.1.20044.37.2.2.1.96.1.2 | Columnpm1004dcpAlmk1K2ClientPortn | read-only | current | Client K1-K2 Extracted Value :This OID gives the value of K1 (LSB) and K2 (MSB) extracted from the overhead of the received OC-48c/STM-16c signal <Condtype> CL… |
| 1.3.6.1.4.1.20044.37.2.2.2 | Nodepm1004dcpAlmClientUrg | |||
| 1.3.6.1.4.1.20044.37.2.2.2.32 | Tablepm1004dcpAlmsfpAlmDdmTable | not-accessible | current | List of pm1004dcpAlmsfpAlmDdm Article |
| 1.3.6.1.4.1.20044.37.2.2.2.32.1 | Rowpm1004dcpAlmsfpAlmDdmEntry | not-accessible | current | Row definition for the pm1004dcpAlmsfpAlmDdm table |
| 1.3.6.1.4.1.20044.37.2.2.2.32.1.1 | Columnpm1004dcpAlmsfpAlmDdmIndex | read-only | current | Index definition for the pm1004dcpAlmsfpAlmDdm table |
| 1.3.6.1.4.1.20044.37.2.2.2.32.1.2 | Columnpm1004dcpAlmTxPwrLowAlaPortn | read-only | current | Client SFP Tx Power Low :Alarm indicating that the SFP output power of port is lower than the threshold value written in the SFP EEPROM <Condtype> TX_PWR_LOW_A… |
| 1.3.6.1.4.1.20044.37.2.2.2.32.1.3 | Columnpm1004dcpAlmTxPwrHighAlaPortn | read-only | current | Client SFP Tx Power High :Alarm indicating that the SFP output power of port is higher than the threshold value written in the SFP EEPROM <Condtype> TX_PWR_HIG… |
| 1.3.6.1.4.1.20044.37.2.2.2.32.1.4 | Columnpm1004dcpAlmTxBiasLowAlaPortn | read-only | current | Client SFP Bias Low :Alarm indicating that the SFP laser bias current of port is lower than the threshold value written in the SFP EEPROM <Condtype> TX_BIAS_LO… |
| 1.3.6.1.4.1.20044.37.2.2.2.32.1.5 | Columnpm1004dcpAlmTxBiasHighAlaPortn | read-only | current | Client SFP Bias High :Alarm indicating that the SFP laser bias current of port is higher than the threshold value written in the SFP EEPROM <Condtype> TX_BIAS_… |
| 1.3.6.1.4.1.20044.37.2.2.2.32.1.6 | Columnpm1004dcpAlmVccLowAlaPortn | read-only | current | Client SFP Power Supply Low :Alarm indicating that the SFP power supply of port is lower than the threshold value written in the SFP EEPROM <Condtype> VCC_LOW_… |
| 1.3.6.1.4.1.20044.37.2.2.2.32.1.7 | Columnpm1004dcpAlmVccHighAlaPortn | read-only | current | Client SFP Power Supply High :Alarm indicating that the SFP power supply of port is higher than the threshold value written in the SFP EEPROM <Condtype> VCC_HI… |
| 1.3.6.1.4.1.20044.37.2.2.2.32.1.8 | Columnpm1004dcpAlmTempLowAlaPortn | read-only | current | Client SFP Temp Low :Alarm indicating that the SFP temperature of port is lower than the threshold value written in the SFP EEPROM <Condtype> TEMP_LOW_ALA_1 <P… |
| 1.3.6.1.4.1.20044.37.2.2.2.32.1.9 | Columnpm1004dcpAlmTempHighAlaPortn | read-only | current | Client SFP Temp High :Alarm indicating that the SFP temperature of port is higher than the threshold value written in the SFP EEPROM <Condtype> TEMP_HIGH_ALA_1… |
| 1.3.6.1.4.1.20044.37.2.2.2.32.1.16 | Columnpm1004dcpAlmRxPwrLowAlaPortn | read-only | current | Client SFP Rx Power Low :Alarm indicating that the SFP input power of port is lower than the threshold value written in the SFP EEPROM <Condtype> RX_PWR_LOW_AL… |
| 1.3.6.1.4.1.20044.37.2.2.2.32.1.17 | Columnpm1004dcpAlmRxPwrHighAlaPortn | read-only | current | Client SFP Rx Power High :Alarm indicating that the SFP input power of port is higher than the threshold value written in the SFP EEPROM <Condtype> RX_PWR_HIGH… |
| 1.3.6.1.4.1.20044.37.2.2.3 | Nodepm1004dcpAlmClientCrit | |||
| 1.3.6.1.4.1.20044.37.2.2.3.8 | Tablepm1004dcpAlmsynthAlmPortTable | not-accessible | current | List of pm1004dcpAlmsynthAlmPort Article |
| 1.3.6.1.4.1.20044.37.2.2.3.8.1 | Rowpm1004dcpAlmsynthAlmPortEntry | not-accessible | current | Row definition for the pm1004dcpAlmsynthAlmPort table |
| 1.3.6.1.4.1.20044.37.2.2.3.8.1.1 | Columnpm1004dcpAlmsynthAlmPortIndex | read-only | current | Index definition for the pm1004dcpAlmsynthAlmPort table |
| 1.3.6.1.4.1.20044.37.2.2.3.8.1.2 | Columnpm1004dcpAlmSfpAbsentPortn | read-only | current | Client SFP Absent :This OID indicates that the SFP module is not present in the client port. <Help> This alarm indicates if the client transceiver is present. … |
| 1.3.6.1.4.1.20044.37.2.2.3.8.1.3 | Columnpm1004dcpAlmDdmAbsentPortn | read-only | current | DDM Supported On Client SFP :This OID indicates that the Client SFP module supports the Digital Diagnostic Monitoring function <Help> This status indicates if … |
| 1.3.6.1.4.1.20044.37.2.2.3.8.1.5 | Columnpm1004dcpAlmHwFailAccPortn | read-only | current | Client HW Fail :This OID indicates a failure on client port, most probably caused by a HW issue. <Condtype> HW_FAIL_ACC_1 <Probcause> equipmentMalfunction (16)… |
| 1.3.6.1.4.1.20044.37.2.2.3.8.1.6 | Columnpm1004dcpAlmDwLsdPortn | read-only | current | Client SFP Laser Shutdown :This OID indicates the Client SFP transmitter output is ON. <Help> This status indicates if the client transceiver laser is ON or OF… |
| 1.3.6.1.4.1.20044.37.2.2.3.8.1.7 | Columnpm1004dcpAlmClientLocalOosPortn | read-only | current | Local Client Port In Service :This OID indicates that the local Client port is In Service (1) or Out of Service (2) <Help> This status indicates if the local c… |
| 1.3.6.1.4.1.20044.37.2.2.3.8.1.8 | Columnpm1004dcpAlmClientRemoteOosPortn | read-only | current | Remote Client Port In Service :This OID indicates that the remote Client port is In Service (1) or Out of Service (2) <Help> This status indicates if the remot… |
| 1.3.6.1.4.1.20044.37.2.2.3.8.1.9 | Columnpm1004dcpAlmDwCaisPortn | read-only | current | Client AIS Inserted :This OID indicates a CAIS has been inserted on the output client port. <Help> This status indicates if a Client Alarm Indication Signal is… |
| 1.3.6.1.4.1.20044.37.2.2.3.8.1.10 | Columnpm1004dcpAlmSfpDdmWarningPortn | read-only | current | Warning On Client SFP DDM :This OID indicates a warning is being received from the Client SFP DDM <Help> This alarm indicates if a DDM Warning has been detecte… |
| 1.3.6.1.4.1.20044.37.2.2.3.8.1.11 | Columnpm1004dcpAlmSfpDdmAlmPortn | read-only | current | Alarm On Client SFP DDM :This OID indicates an alarm is being received from the Client SFP DDM <Help> This alarm indicates if a DDM Alarm has been detected on … |
| 1.3.6.1.4.1.20044.37.2.2.3.8.1.13 | Columnpm1004dcpAlmFailAccPortn | read-only | current | Client Access Fail :This OID indicates a failure on the Client port <Condtype> FAIL_ACC_1 <Probcause> equipmentMalfunction (16) <Alarmtype> synthesisAlarm (12)… |
| 1.3.6.1.4.1.20044.37.2.2.3.8.1.16 | Columnpm1004dcpAlmClientActivePortn | read-only | current | Client Sink (Line1 Or Line2) :This bit indicates the Client #n is active on receive side <Help> This status indicates whether the Client is extracted from Line… |
| 1.3.6.1.4.1.20044.37.2.2.3.8.1.17 | Columnpm1004dcpAlmUpCsfPortn | read-only | current | Client Signal Fail Inserted :This OID indicates a CSF has been inserted in the upstream client port. <Help> This status indicates if a Client Signal Fail is cu… |
| 1.3.6.1.4.1.20044.37.2.2.3.16 | Tablepm1004dcpAlmaccessioAlmTable | not-accessible | current | List of pm1004dcpAlmaccessioAlm Article |
| 1.3.6.1.4.1.20044.37.2.2.3.16.1 | Rowpm1004dcpAlmaccessioAlmEntry | not-accessible | current | Row definition for the pm1004dcpAlmaccessioAlm table |
| 1.3.6.1.4.1.20044.37.2.2.3.16.1.1 | Columnpm1004dcpAlmaccessioAlmIndex | read-only | current | Index definition for the pm1004dcpAlmaccessioAlm table |
| 1.3.6.1.4.1.20044.37.2.2.3.16.1.2 | Columnpm1004dcpAlmDwLasFailPortn | read-only | current | Client SFP Tx Failed :This OID indicates that the transmitter fails for the SFP plugged into the client port (this alarm reports the transmitter failure alarm … |
| 1.3.6.1.4.1.20044.37.2.2.3.16.1.5 | Columnpm1004dcpAlmUpLosPortn | read-only | current | Client Input Loss Of Signal :This OID indicates that no signal is present on the SFP of the client port <Help> This alarm indicates if an optical signal is det… |
| 1.3.6.1.4.1.20044.37.2.2.3.72 | Tablepm1004dcpAlmmapperDeAlmTable | not-accessible | current | List of pm1004dcpAlmmapperDeAlm Article |
| 1.3.6.1.4.1.20044.37.2.2.3.72.1 | Rowpm1004dcpAlmmapperDeAlmEntry | not-accessible | current | Row definition for the pm1004dcpAlmmapperDeAlm table |
| 1.3.6.1.4.1.20044.37.2.2.3.72.1.1 | Columnpm1004dcpAlmmapperDeAlmIndex | read-only | current | Index definition for the pm1004dcpAlmmapperDeAlm table |
| 1.3.6.1.4.1.20044.37.2.2.3.72.1.2 | Columnpm1004dcpAlmUpAccOosPortn | read-only | current | Client Loss Of Frame :This OID indicates the upstream client input port is in Loss of Frame condition <Help> This alarm indicates if there is a Loss of Frame i… |
| 1.3.6.1.4.1.20044.37.2.2.3.72.1.11 | Columnpm1004dcpAlmUpBufferOvlPortn | read-only | current | Client Upstream Buffer Overload :This OID indicates that the rate adaptation buffer for client port is in overload. <Help> This alarm indicates if there is a u… |
| 1.3.6.1.4.1.20044.37.2.2.3.72.1.12 | Columnpm1004dcpAlmDwCsfDetPortn | read-only | current | Client Signal Fail Detected :This OID indicates that a CSF has been detected on client port in the downstream direction <Help> This alarm indicates if a Client… |
| 1.3.6.1.4.1.20044.37.2.2.3.72.1.15 | Columnpm1004dcpAlmDwBufferOvlPortn | read-only | current | Client Downstream Buffer Overload :This OID indicates that the de-mapper buffer for client port is in overload. <Help> This alarm indicates if there is a downs… |
| 1.3.6.1.4.1.20044.37.2.2.3.104 | Tablepm1004dcpAlmaccessioSdhAlarmTable | not-accessible | current | List of pm1004dcpAlmaccessioSdhAlarm Article |
| 1.3.6.1.4.1.20044.37.2.2.3.104.1 | Rowpm1004dcpAlmaccessioSdhAlarmEntry | not-accessible | current | Row definition for the pm1004dcpAlmaccessioSdhAlarm table |
| 1.3.6.1.4.1.20044.37.2.2.3.104.1.1 | Columnpm1004dcpAlmaccessioSdhAlarmIndex | read-only | current | Index definition for the pm1004dcpAlmaccessioSdhAlarm table |
| 1.3.6.1.4.1.20044.37.2.2.3.104.1.3 | Columnpm1004dcpAlmFifoErrPortn | read-only | current | Client Transceiver Fifo Error :This OID indicates that an error has been detected in the FIFO of the client transceiver <Condtype> FIFO_ERR_1 <Probcause> trans… |
| 1.3.6.1.4.1.20044.37.2.2.3.104.1.4 | Columnpm1004dcpAlmRxLossOfLockPortn | read-only | current | Client Rx Clock Lock Error :This OID indicates the recovered receive clock of the client transceiver is not locked <Condtype> RX_LOSS_OF_LOCK_1 <Probcause> rec… |
| 1.3.6.1.4.1.20044.37.2.2.3.104.1.5 | Columnpm1004dcpAlmTxLossOfLockPortn | read-only | current | Client Tx Clock Lock Error :This OID indicates that the transmit clock of the client transceiver is not locke <Condtype> TX_LOSS_OF_LOCK_1 <Probcause> transmit… |
| 1.3.6.1.4.1.20044.37.2.2.3.104.1.6 | Columnpm1004dcpAlmClientAisDetPortn | read-only | current | Client MS-AIS :This OID indicates that a MS-AIS has been detected on the client input stream <Help> This alarm indicates if there is a MS-AIS/L-AIS is detected… |
| 1.3.6.1.4.1.20044.37.2.2.3.104.1.7 | Columnpm1004dcpAlmClientRdiDetPortn | read-only | current | Client MS-RDI :This OID indicates that a MS-RDI has been detected on the client input stream <Help> This alarm indicates if there is a MS-RDI/L-RDI is detected… |
| 1.3.6.1.4.1.20044.37.2.2.3.104.1.8 | Columnpm1004dcpAlmClientOofPortn | read-only | current | Client Out Of Frame :This OID indicates that an Out Of Frame condition has been detected on the OC-48/STM-16 client input stream <Help> This alarm indicates if… |
| 1.3.6.1.4.1.20044.37.2.3 | Nodepm1004dcpAlmLine | |||
| 1.3.6.1.4.1.20044.37.2.3.1 | Nodepm1004dcpAlmLineNurg | |||
| 1.3.6.1.4.1.20044.37.2.3.1.209 | Tablepm1004dcpAlmlineXfp1WarningsTable | not-accessible | current | List of pm1004dcpAlmlineXfp1Warnings Article |
| 1.3.6.1.4.1.20044.37.2.3.1.209.1 | Rowpm1004dcpAlmlineXfp1WarningsEntry | not-accessible | current | Row definition for the pm1004dcpAlmlineXfp1Warnings table |
| 1.3.6.1.4.1.20044.37.2.3.1.209.1.1 | Columnpm1004dcpAlmlineXfp1WarningsIndex | read-only | current | Index definition for the pm1004dcpAlmlineXfp1Warnings table |
| 1.3.6.1.4.1.20044.37.2.3.1.209.1.2 | Columnpm1004dcpAlmTxPowerLowWarningPortn | read-only | current | Line Optical Tx Power Low Warning :Warning indicating that the XFP/OTX transmitter transmitter output power is lower than the threshold value written in the XF… |
| 1.3.6.1.4.1.20044.37.2.3.1.209.1.3 | Columnpm1004dcpAlmTxPowerHighWarningPortn | read-only | current | Line Optical Tx Power High Warning :Warning indicating that the XFP/OTX transmitter transmitter output power is higher than the threshold value written in the … |
| 1.3.6.1.4.1.20044.37.2.3.1.209.1.4 | Columnpm1004dcpAlmTxBiasLowWarningPortn | read-only | current | Line Transceiver Bias Low Warning :Warning indicating that the XFP/OTX transmitter laser bias current is lower than the threshold value written in the XFP/OTX … |
| 1.3.6.1.4.1.20044.37.2.3.1.209.1.5 | Columnpm1004dcpAlmTxBiasHighWarningPortn | read-only | current | Line Transceiver Bias High Warning :Warning indicating that the XFP/OTX transmitter laser bias current is higher than the threshold value written in the XFP EE… |
| 1.3.6.1.4.1.20044.37.2.3.1.209.1.8 | Columnpm1004dcpAlmTempLowWarningPortn | read-only | current | Line Transceiver Temp Low Warning :Warning indicating that the XFP/OTX temperature is lower than the threshold value written in the XFP/OTX EEPROM <Condtype> T… |
| 1.3.6.1.4.1.20044.37.2.3.1.209.1.9 | Columnpm1004dcpAlmTempHighWarningPortn | read-only | current | Line Transceiver Temp High Warning :Warning indicating that the XFP/OTX temperature is higher than the threshold value written in the XFP EEPROM <Condtype> TEM… |
| 1.3.6.1.4.1.20044.37.2.3.1.209.1.16 | Columnpm1004dcpAlmRxPowerLowWarningPortn | read-only | current | Line Optical Rx Power Low Warning :Warning indicating that the XFP received optical power is lower than the threshold value written in the XFP EEPROM <Condtype… |
| 1.3.6.1.4.1.20044.37.2.3.1.209.1.17 | Columnpm1004dcpAlmRxPowerHighWarningPortn | read-only | current | Line Optical Rx Power High Warning :Warning indicating that the XFP received optical power is higher than the threshold value written in the XFP EEPROM <Condty… |
| 1.3.6.1.4.1.20044.37.2.3.1.225 | Tablepm1004dcpAlmlineOtx1TlhWarningsTable | not-accessible | current | List of pm1004dcpAlmlineOtx1TlhWarnings Article |
| 1.3.6.1.4.1.20044.37.2.3.1.225.1 | Rowpm1004dcpAlmlineOtx1TlhWarningsEntry | not-accessible | current | Row definition for the pm1004dcpAlmlineOtx1TlhWarnings table |
| 1.3.6.1.4.1.20044.37.2.3.1.225.1.1 | Columnpm1004dcpAlmlineOtx1TlhWarningsIndex | read-only | current | Index definition for the pm1004dcpAlmlineOtx1TlhWarnings table |
| 1.3.6.1.4.1.20044.37.2.3.1.225.1.6 | Columnpm1004dcpAlmLineModulatorAgingHighWarningPortn | read-only | current | Line Modulator Aging High Warning :Warning indicating the Line OTX TLH modulator aging is higher than the threshold written in the EEPROM <Condtype> LINE_MODUL… |
| 1.3.6.1.4.1.20044.37.2.3.1.225.1.7 | Columnpm1004dcpAlmLineAgingHighWarningPortn | read-only | current | Line OTX TLH Aging High Warning :Warning indicating the Line OTX TLH aging is higher than the threshold written in the EEPROM <Condtype> LINE_AGING_HIGH_WARNIN… |
| 1.3.6.1.4.1.20044.37.2.3.1.225.1.13 | Columnpm1004dcpAlmLineFreqDevHighWarningPortn | read-only | current | Line Freq. Deviation High Warning :Warning indicating the Line OTX TLH frequency deviation is higher than the threshold written in the EEPROM <Condtype> LINE_F… |
| 1.3.6.1.4.1.20044.37.2.3.1.225.1.15 | Columnpm1004dcpAlmLineLaserTempHighWarningPortn | read-only | current | Line Laser Temp. High Warning :Warning indicating the Line OTX TLH laser temperature is higher than the threshold written in the EEPROM <Condtype> LINE_LASER_T… |
| 1.3.6.1.4.1.20044.37.2.3.2 | Nodepm1004dcpAlmLineUrg | |||
| 1.3.6.1.4.1.20044.37.2.3.2.129 | Tablepm1004dcpAlmdfrmBerTable | not-accessible | current | List of pm1004dcpAlmdfrmBer Article |
| 1.3.6.1.4.1.20044.37.2.3.2.129.1 | Rowpm1004dcpAlmdfrmBerEntry | not-accessible | current | Row definition for the pm1004dcpAlmdfrmBer table |
| 1.3.6.1.4.1.20044.37.2.3.2.129.1.1 | Columnpm1004dcpAlmdfrmBerIndex | read-only | current | Index definition for the pm1004dcpAlmdfrmBer table |
| 1.3.6.1.4.1.20044.37.2.3.2.129.1.2 | Columnpm1004dcpAlmLineSignalDegradePortn | read-only | current | Custom Line Signal Degrade :This OID indicates that the line input signal is DEGRADE. The assertion hysteresis can customized by the host <Condtype> LINE_SIGNA… |
| 1.3.6.1.4.1.20044.37.2.3.2.129.1.3 | Columnpm1004dcpAlmLineSignalFailPortn | read-only | current | Custom Line Signal Fail :This OID indicates that the line input signal is FAIL. The assertion hysteresis can be customized by the host <Condtype> LINE_SIGNAL_F… |
| 1.3.6.1.4.1.20044.37.2.3.2.129.1.6 | Columnpm1004dcpAlmLineDegradePortn | read-only | current | Fixed Line Signal Degrade :This OID indicates that the line input signal is DEGRADE. The assetion hysteresis is fixed to 10-8 (assertion) and 10-9 (de-assertio… |
| 1.3.6.1.4.1.20044.37.2.3.2.208 | Tablepm1004dcpAlmlineXfp1AlarmTable | not-accessible | current | List of pm1004dcpAlmlineXfp1Alarm Article |
| 1.3.6.1.4.1.20044.37.2.3.2.208.1 | Rowpm1004dcpAlmlineXfp1AlarmEntry | not-accessible | current | Row definition for the pm1004dcpAlmlineXfp1Alarm table |
| 1.3.6.1.4.1.20044.37.2.3.2.208.1.1 | Columnpm1004dcpAlmlineXfp1AlarmIndex | read-only | current | Index definition for the pm1004dcpAlmlineXfp1Alarm table |
| 1.3.6.1.4.1.20044.37.2.3.2.208.1.2 | Columnpm1004dcpAlmTxPowerLowAlarmPortn | read-only | current | Line Optical Tx Power Low :Alarm indicating that the XFP/OTX transmitter transmitter output power is lower than the threshold value written in the XFP/OTX EEPR… |
| 1.3.6.1.4.1.20044.37.2.3.2.208.1.3 | Columnpm1004dcpAlmTxPowerHighAlarmPortn | read-only | current | Line Optical Tx Power High :Alarm indicating that the XFP/OTX transmitter transmitter output power is higher than the threshold value written in the XFP EEPROM… |
| 1.3.6.1.4.1.20044.37.2.3.2.208.1.4 | Columnpm1004dcpAlmTxBiasLowAlarmPortn | read-only | current | Line Transceiver Bias Low :Alarm indicating that the XFP/OTX transmitter laser bias current is lower than the threshold value written in the XFP/OTX EEPROM <Co… |
| 1.3.6.1.4.1.20044.37.2.3.2.208.1.5 | Columnpm1004dcpAlmTxBiasHighAlarmPortn | read-only | current | Line Transceiver Bias High :Alarm indicating that the XFP/OTX transmitter laser bias current is higher than the threshold value written in the XFP EEPROM <Cond… |
| 1.3.6.1.4.1.20044.37.2.3.2.208.1.8 | Columnpm1004dcpAlmTempLowAlarmPortn | read-only | current | Line Transceiver Temp Low :Alarm indicating that the XFP/OTX temperature is lower than the threshold value written in the XFP/OTX EEPROM <Condtype> TEMP_LOW_AL… |
| 1.3.6.1.4.1.20044.37.2.3.2.208.1.9 | Columnpm1004dcpAlmTempHighAlarmPortn | read-only | current | Line Transceiver Temp High :Alarm indicating that the XFP/OTX temperature is higher than the threshold value written in the XFP EEPROM <Condtype> TEMP_HIGH_ALA… |
| 1.3.6.1.4.1.20044.37.2.3.2.208.1.16 | Columnpm1004dcpAlmRxPowerLowAlarmPortn | read-only | current | Line Optical Rx Power Low :Alarm indicating that the XFP received optical power is lower than the threshold value written in the XFP EEPROM <Condtype> RX_POWER… |
| 1.3.6.1.4.1.20044.37.2.3.2.208.1.17 | Columnpm1004dcpAlmRxPowerHighAlarmPortn | read-only | current | Line Optical Rx Power High :Alarm indicating that the XFP received optical power is higher than the threshold value written in the XFP EEPROM <Condtype> RX_POW… |
| 1.3.6.1.4.1.20044.37.2.3.2.212 | Tablepm1004dcpAlmlineXfp1SupplyAlarmTable | not-accessible | current | List of pm1004dcpAlmlineXfp1SupplyAlarm Article |
| 1.3.6.1.4.1.20044.37.2.3.2.212.1 | Rowpm1004dcpAlmlineXfp1SupplyAlarmEntry | not-accessible | current | Row definition for the pm1004dcpAlmlineXfp1SupplyAlarm table |
| 1.3.6.1.4.1.20044.37.2.3.2.212.1.1 | Columnpm1004dcpAlmlineXfp1SupplyAlarmIndex | read-only | current | Index definition for the pm1004dcpAlmlineXfp1SupplyAlarm table |
| 1.3.6.1.4.1.20044.37.2.3.2.212.1.2 | Columnpm1004dcpAlmVee5LowAlarmPortn | read-only | current | VEE5 Power Supply Low :Alarm indicating the XFP/OTX VEE5 power supply is lower than the threshold written in the EEPROM <Condtype> VEE5_LOW_ALARM_1 <Probcause>… |
| 1.3.6.1.4.1.20044.37.2.3.2.212.1.3 | Columnpm1004dcpAlmVee5HighAlarmPortn | read-only | current | VEE5 Power Supply High :Alarm indicating the XFP/OTX VEE5 power supply is higher than the threshold written in the EEPROM <Condtype> VEE5_HIGH_ALARM_1 <Probcau… |
| 1.3.6.1.4.1.20044.37.2.3.2.212.1.4 | Columnpm1004dcpAlmVcc2LowAlarmPortn | read-only | current | VCC2 Power Supply Low :Alarm indicating the XFP/OTX VCC2 power supply is lower than the threshold written in the EEPROM <Condtype> VCC2_LOW_ALARM_1 <Probcause>… |
| 1.3.6.1.4.1.20044.37.2.3.2.212.1.5 | Columnpm1004dcpAlmVcc2HighAlarmPortn | read-only | current | VCC2 Power Supply High :Alarm indicating the XFP/OTX VCC2 power supply is higher than the threshold written in the EEPROM <Condtype> VCC2_HIGH_ALARM_1 <Probcau… |
| 1.3.6.1.4.1.20044.37.2.3.2.212.1.6 | Columnpm1004dcpAlmVcc3LowAlarmPortn | read-only | current | VCC3 Power Supply Low :Alarm indicating the XFP/OTX VCC3 power supply is lower than the threshold written in the EEPROM <Condtype> VCC3_LOW_ALARM_1 <Probcause>… |
| 1.3.6.1.4.1.20044.37.2.3.2.212.1.7 | Columnpm1004dcpAlmVcc3HighAlarmPortn | read-only | current | VCC3 Power Supply High :Alarm indicating the XFP/OTX VCC3 power supply is higher than the threshold written in the EEPROM <Condtype> VCC3_HIGH_ALARM_1 <Probcau… |
| 1.3.6.1.4.1.20044.37.2.3.2.212.1.8 | Columnpm1004dcpAlmVcc5LowAlarmPortn | read-only | current | VCC5 Power Supply Low :Alarm indicating the XFP/OTX VCC5 power supply is lower than the threshold written in the EEPROM <Condtype> VCC5_LOW_ALARM_1 <Probcause>… |
| 1.3.6.1.4.1.20044.37.2.3.2.212.1.9 | Columnpm1004dcpAlmVcc5HighAlarmPortn | read-only | current | VCC5 Power Supply High :Alarm indicating the XFP/OTX VCC5 power supply is higher than the threshold written in the EEPROM <Condtype> VCC5_HIGH_ALARM_1 <Probcau… |
| 1.3.6.1.4.1.20044.37.2.3.2.212.1.10 | Columnpm1004dcpAlmVee5LowWarningPortn | read-only | current | VEE5 Power Supply Low Warning :Warning indicating the XFP/OTX VEE5 power supply is lower than the threshold written in the EEPROM <Condtype> VEE5_LOW_WARNING_1… |
| 1.3.6.1.4.1.20044.37.2.3.2.212.1.11 | Columnpm1004dcpAlmVee5HighWarningPortn | read-only | current | VEE5 Power Supply High Warning :Warning indicating the XFP/OTX VEE5 power supply is higher than the threshold written in the EEPROM <Condtype> VEE5_HIGH_WARNIN… |
| 1.3.6.1.4.1.20044.37.2.3.2.212.1.12 | Columnpm1004dcpAlmVcc2LowWarningPortn | read-only | current | VCC2 Power Supply Low Warning :Warning indicating the XFP/OTX VCC2 power supply is lower than the threshold written in the EEPROM <Condtype> VCC2_LOW_WARNING_1… |
| 1.3.6.1.4.1.20044.37.2.3.2.212.1.13 | Columnpm1004dcpAlmVcc2HighWarningPortn | read-only | current | VCC2 Power Supply High Warning :Warning indicating the XFP/OTX VCC2 power supply is higher than the threshold written in the EEPROM <Condtype> VCC2_HIGH_WARNIN… |
| 1.3.6.1.4.1.20044.37.2.3.2.212.1.14 | Columnpm1004dcpAlmVcc3LowWarningPortn | read-only | current | VCC3 Power Supply Low Warning :Warning indicating the XFP/OTX VCC3 power supply is lower than the threshold written in the EEPROM <Condtype> VCC3_LOW_WARNING_1… |
| 1.3.6.1.4.1.20044.37.2.3.2.212.1.15 | Columnpm1004dcpAlmVcc3HighWarningPortn | read-only | current | VCC3 Power Supply High Warning :Warning indicating the XFP/OTX VCC3 power supply is higher than the threshold written in the EEPROM <Condtype> VCC3_HIGH_WARNIN… |
| 1.3.6.1.4.1.20044.37.2.3.2.212.1.16 | Columnpm1004dcpAlmVcc5LowWarningPortn | read-only | current | VCC5 Power Supply Low Warning :Warning indicating the XFP/OTX VCC5 power supply is lower than the threshold written in the EEPROM <Condtype> VCC5_LOW_WARNING_1… |
| 1.3.6.1.4.1.20044.37.2.3.2.212.1.17 | Columnpm1004dcpAlmVcc5HighWarningPortn | read-only | current | VCC5 Power Supply High Warning :Warning indicating the XFP/OTX VCC5 power supply is higher than the threshold written in the EEPROM <Condtype> VCC5_HIGH_WARNIN… |
| 1.3.6.1.4.1.20044.37.2.3.2.224 | Tablepm1004dcpAlmlineOtx1TlhAlarmsTable | not-accessible | current | List of pm1004dcpAlmlineOtx1TlhAlarms Article |
| 1.3.6.1.4.1.20044.37.2.3.2.224.1 | Rowpm1004dcpAlmlineOtx1TlhAlarmsEntry | not-accessible | current | Row definition for the pm1004dcpAlmlineOtx1TlhAlarms table |
| 1.3.6.1.4.1.20044.37.2.3.2.224.1.1 | Columnpm1004dcpAlmlineOtx1TlhAlarmsIndex | read-only | current | Index definition for the pm1004dcpAlmlineOtx1TlhAlarms table |
| 1.3.6.1.4.1.20044.37.2.3.2.224.1.6 | Columnpm1004dcpAlmLineModulatorAgingHighAlaPortn | read-only | current | Line Modulator Aging High Alarm :Alarm indicating the Line OTX TLH modulator aging is higher than the threshold written in the EEPROM <Condtype> LINE_MODULATOR… |
| 1.3.6.1.4.1.20044.37.2.3.2.224.1.7 | Columnpm1004dcpAlmLineAgingHighAlaPortn | read-only | current | Line OTX TLH Aging High Alarm :Alarm indicating the Line OTX TLH aging is higher than the threshold written in the EEPROM <Condtype> LINE_AGING_HIGH_ALA_1 <Pro… |
| 1.3.6.1.4.1.20044.37.2.3.2.224.1.13 | Columnpm1004dcpAlmLineFreqDevHighAlaPortn | read-only | current | Line Freq. Deviation High Alarm :Alarm indicating the Line OTX TLH frequency deviation is higher than the threshold written in the EEPROM <Condtype> LINE_FREQ_… |
| 1.3.6.1.4.1.20044.37.2.3.2.224.1.15 | Columnpm1004dcpAlmLineLaserTempHighAlaPortn | read-only | current | Line Laser Temp. High Alarm :Alarm indicating the Line OTX TLH laser temperature is higher than the threshold written in the EEPROM <Condtype> LINE_LASER_TEMP_… |
| 1.3.6.1.4.1.20044.37.2.3.3 | Nodepm1004dcpAlmLineCrit | |||
| 1.3.6.1.4.1.20044.37.2.3.3.7 | Tablepm1004dcpAlmsynthAlmLineTable | not-accessible | current | List of pm1004dcpAlmsynthAlmLine Article |
| 1.3.6.1.4.1.20044.37.2.3.3.7.1 | Rowpm1004dcpAlmsynthAlmLineEntry | not-accessible | current | Row definition for the pm1004dcpAlmsynthAlmLine table |
| 1.3.6.1.4.1.20044.37.2.3.3.7.1.1 | Columnpm1004dcpAlmsynthAlmLineIndex | read-only | current | Index definition for the pm1004dcpAlmsynthAlmLine table |
| 1.3.6.1.4.1.20044.37.2.3.3.7.1.2 | Columnpm1004dcpAlmXfpAbsentPortn | read-only | current | Line Optical Module Absent :This OID indicates that the line optical interface (XFP or OTX) is not plugged in. <Help> This alarm indicates if the line transcei… |
| 1.3.6.1.4.1.20044.37.2.3.3.7.1.3 | Columnpm1004dcpAlmXfpInitNotComplPortn | read-only | current | Line Optical Module Ready :This OID indicates that the optical interface (XFP or OTX) is not operational. <Help> This status indicates if the line transceiver … |
| 1.3.6.1.4.1.20044.37.2.3.3.7.1.5 | Columnpm1004dcpAlmLineHwFailPortn | read-only | current | Line Port HW Failure :This OID indicates a failure on line port, most probably caused by a HW issue <Condtype> LINE_HW_FAIL <Probcause> equipmentMalfunction (1… |
| 1.3.6.1.4.1.20044.37.2.3.3.7.1.6 | Columnpm1004dcpAlmXfpTxOffPortn | read-only | current | Line Optical Module Laser Shutdown :This OID indicates the line optical output power is on <Help> This status indicates if the line transceiver laser is ON or … |
| 1.3.6.1.4.1.20044.37.2.3.3.7.1.7 | Columnpm1004dcpAlmLineLocalOosPortn | read-only | current | Line Port In Service :This OID indicates that the Line port is In Service (1) of Out or Service (2) <Help> This status indicates if the line port is in service… |
| 1.3.6.1.4.1.20044.37.2.3.3.7.1.9 | Columnpm1004dcpAlmUpRdiInsPortn | read-only | current | SM-BDI Inserted On Line :This OID indicates an upstream SM-BDI has been inserted in the outgoing G709 signal. <Help> This status indicates if a SM-BDI is curre… |
| 1.3.6.1.4.1.20044.37.2.3.3.7.1.10 | Columnpm1004dcpAlmLineDdmWarningPortn | read-only | current | Warning On Line Optical Module DDM :This OID indicates a warning is present coming out of Line optical interface DDM <Help> This status indicates if a MS-RDI/L… |
| 1.3.6.1.4.1.20044.37.2.3.3.7.1.11 | Columnpm1004dcpAlmLineDdmAlmPortn | read-only | current | Alarm On Line Optical Module DDM :This OID indicates an alarm is present coming out of Line optical interface DDM <Help> This alarm indicates if a DDM Warning … |
| 1.3.6.1.4.1.20044.37.2.3.3.7.1.13 | Columnpm1004dcpAlmLineFailPortn | read-only | current | Line Port Failure :This OID indicates a failure on the line port <Condtype> LINE_FAIL <Probcause> equipmentMalfunction (16) <Alarmtype> synthesisAlarm (12) <Po… |
| 1.3.6.1.4.1.20044.37.2.3.3.128 | Tablepm1004dcpAlmdfrmAlmTable | not-accessible | current | List of pm1004dcpAlmdfrmAlm Article |
| 1.3.6.1.4.1.20044.37.2.3.3.128.1 | Rowpm1004dcpAlmdfrmAlmEntry | not-accessible | current | Row definition for the pm1004dcpAlmdfrmAlm table |
| 1.3.6.1.4.1.20044.37.2.3.3.128.1.1 | Columnpm1004dcpAlmdfrmAlmIndex | read-only | current | Index definition for the pm1004dcpAlmdfrmAlm table |
| 1.3.6.1.4.1.20044.37.2.3.3.128.1.2 | Columnpm1004dcpAlmDwAisDetPortn | read-only | current | ODU2 AIS Detected On Line Input :This OID indicates that an ODU2-AIS has been detected on G709 input signal <Help> This alarm indicates if there is a ODU2 AIS … |
| 1.3.6.1.4.1.20044.37.2.3.3.128.1.3 | Columnpm1004dcpAlmDwRdiDetPortn | read-only | current | OTU2 SM-BDI Detected On Line Input :This OID indicates that an SM-BDI has been detected on G709 input signal <Help> This alarm indicates if there is a SM-BDI i… |
| 1.3.6.1.4.1.20044.37.2.3.3.128.1.4 | Columnpm1004dcpAlmDwOofPortn | read-only | current | Line Out Of Frame :This OID indicates that an Out Of Frame has been detected on G709 input signal <Help> This alarm indicates if there is a G,709 Out of Frame … |
| 1.3.6.1.4.1.20044.37.2.3.3.128.1.5 | Columnpm1004dcpAlmDwLofPortn | read-only | current | Line Loss Of Frame :This OID indicates that a Loss Of Frame has been detected on G709 input signal <Help> This alarm indicates if there is a G,709 Loss of Fram… |
| 1.3.6.1.4.1.20044.37.2.3.3.133 | Tablepm1004dcpAlmlineSyncAlarmsTable | not-accessible | current | List of pm1004dcpAlmlineSyncAlarms Article |
| 1.3.6.1.4.1.20044.37.2.3.3.133.1 | Rowpm1004dcpAlmlineSyncAlarmsEntry | not-accessible | current | Row definition for the pm1004dcpAlmlineSyncAlarms table |
| 1.3.6.1.4.1.20044.37.2.3.3.133.1.1 | Columnpm1004dcpAlmlineSyncAlarmsIndex | read-only | current | Index definition for the pm1004dcpAlmlineSyncAlarms table |
| 1.3.6.1.4.1.20044.37.2.3.3.133.1.13 | Columnpm1004dcpAlmDwLockerrPortn | read-only | current | Downstream Clock Lock Error :This OID indicates that the deserializer input 10 Gb/s clock recovery is not locked. <Condtype> DW_LOCKERR <Probcause> receiveFail… |
| 1.3.6.1.4.1.20044.37.2.3.3.133.1.14 | Columnpm1004dcpAlmUpLockerrPortn | read-only | current | Upstream Clock Lock Error :This OID indicates that the serializer output 10 Gb/s clock multiplier unit is not locked. <Condtype> UP_LOCKERR <Probcause> receive… |
| 1.3.6.1.4.1.20044.37.2.3.3.133.1.17 | Columnpm1004dcpAlmDwLosPortn | read-only | current | Line Input Loss Of Signal :This OID indicates a loss of signal on the 10 Gb/s input. <Help> This alarm indicates if an optical signal is detected on the line t… |
| 1.3.6.1.4.1.20044.37.2.3.3.211 | Tablepm1004dcpAlmlineXfp1AlarmsTable | not-accessible | current | List of pm1004dcpAlmlineXfp1Alarms Article |
| 1.3.6.1.4.1.20044.37.2.3.3.211.1 | Rowpm1004dcpAlmlineXfp1AlarmsEntry | not-accessible | current | Row definition for the pm1004dcpAlmlineXfp1Alarms table |
| 1.3.6.1.4.1.20044.37.2.3.3.211.1.1 | Columnpm1004dcpAlmlineXfp1AlarmsIndex | read-only | current | Index definition for the pm1004dcpAlmlineXfp1Alarms table |
| 1.3.6.1.4.1.20044.37.2.3.3.211.1.3 | Columnpm1004dcpAlmModNrPortn | read-only | current | Line Optical Module Not Ready :This OID indicates that the module is unable to determine correct data. <Help> This alarm indicates if the line transceiver is r… |
| 1.3.6.1.4.1.20044.37.2.3.3.211.1.4 | Columnpm1004dcpAlmRxCdrNotLockedPortn | read-only | current | Line Optical Rx CDR Unlocked :This OID indicates that a loss of lock on the receiving side CDR has been detected <Help> This alarm indicates if the Rx CDR is l… |
| 1.3.6.1.4.1.20044.37.2.3.3.211.1.6 | Columnpm1004dcpAlmRxNrPortn | read-only | current | Line Optical Rx Not Ready :This OID indicates that a condition has arisen leading to invalid data on the receiving side. <Help> This alarm indicates if the Rx … |
| 1.3.6.1.4.1.20044.37.2.3.3.211.1.7 | Columnpm1004dcpAlmTxCdrNotLockedPortn | read-only | current | Line Optical Tx CDR Unlocked :This OID indicates a loss of lock on the transmitting side CDR has been detected. <Help> This alarm indicates if the Tx CDR is lo… |
| 1.3.6.1.4.1.20044.37.2.3.3.211.1.8 | Columnpm1004dcpAlmTxFaultPortn | read-only | current | Line Optical Tx Failure :This OID indicates a fault condition on the laser detected by the safety syste <Help> This alarm indicates if the laser of the line tr… |
| 1.3.6.1.4.1.20044.37.2.3.3.211.1.9 | Columnpm1004dcpAlmTxNrPortn | read-only | current | Line Optical Tx Not Ready :This OID indicates a condition has arisen leading to invalid data on the transmitting side <Help> This alarm indicates if the Tx par… |
| 1.3.6.1.4.1.20044.37.2.3.3.211.1.15 | Columnpm1004dcpAlmWavelengthUnlockedPortn | read-only | current | Line Optical Tx Wavelength Unlocked :This OID indicates that the wavelength error is exceeding the manufacturer tolerance <Help> This alarm indicates if the wa… |
| 1.3.6.1.4.1.20044.37.2.3.3.211.1.16 | Columnpm1004dcpAlmTecFaultPortn | read-only | current | Line Optical Tx Temp Regul Failed :This OID indicates a failure on the TEC module <Help> This alarm indicates if the TEC of the line transceiver is in fail con… |
| 1.3.6.1.4.1.20044.37.2.3.3.211.1.17 | Columnpm1004dcpAlmApdSupplyFaultPortn | read-only | current | Line Rx Photodiode Power Failed :This OID indicates a failure on the APD power supply <Help> This alarm indicates if the APD power supply is in fail condition … |
| 1.3.6.1.4.1.20044.37.3 | Nodepm1004dcpmeasures | |||
| 1.3.6.1.4.1.20044.37.3.1 | Nodepm1004dcpMesrOther | |||
| 1.3.6.1.4.1.20044.37.3.1.0 | Scalarpm1004dcpMesrsynth0 | read-only | deprecated | Not Used :This OID gives the unit used on AUX1 measurement of XFP#1 (Unit = ) |
| 1.3.6.1.4.1.20044.37.3.1.1 | Scalarpm1004dcpMesrsynth1 | read-only | deprecated | Not Used :This OID gives the unit used on AUX2 measurement of XFP#1 (Unit = ) |
| 1.3.6.1.4.1.20044.37.3.2 | Nodepm1004dcpMesrClient | |||
| 1.3.6.1.4.1.20044.37.3.2.16 | Tablepm1004dcpMesrtempMeasTable | not-accessible | current | List of pm1004dcpMesrtempMeas Article |
| 1.3.6.1.4.1.20044.37.3.2.16.1 | Rowpm1004dcpMesrtempMeasEntry | not-accessible | current | Row definition for the pm1004dcpMesrtempMeas table |
| 1.3.6.1.4.1.20044.37.3.2.16.1.1 | Columnpm1004dcpMesrtempMeasIndex | read-only | current | Index definition for the pm1004dcpMesrtempMeas table |
| 1.3.6.1.4.1.20044.37.3.2.16.1.2 | Columnpm1004dcpMesrtempMeasPortn | read-only | current | Client SFP Temperature :This OID gives the temperature value of the SFP plugged in port, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/25… |
| 1.3.6.1.4.1.20044.37.3.2.24 | Tablepm1004dcpMesrvoltMeasTable | not-accessible | current | List of pm1004dcpMesrvoltMeas Article |
| 1.3.6.1.4.1.20044.37.3.2.24.1 | Rowpm1004dcpMesrvoltMeasEntry | not-accessible | current | Row definition for the pm1004dcpMesrvoltMeas table |
| 1.3.6.1.4.1.20044.37.3.2.24.1.1 | Columnpm1004dcpMesrvoltMeasIndex | read-only | current | Index definition for the pm1004dcpMesrvoltMeas table |
| 1.3.6.1.4.1.20044.37.3.2.24.1.2 | Columnpm1004dcpMesrvoltMeasPortn | read-only | current | Client SFP Power Supply :This OID gives the 3V3 voltage value of the SFP plugged into port, read from the DDM (Digital Diagnostic Monitoring) (Voltage = AV/100… |
| 1.3.6.1.4.1.20044.37.3.2.32 | Tablepm1004dcpMesrbiasMeasTable | not-accessible | current | List of pm1004dcpMesrbiasMeas Article |
| 1.3.6.1.4.1.20044.37.3.2.32.1 | Rowpm1004dcpMesrbiasMeasEntry | not-accessible | current | Row definition for the pm1004dcpMesrbiasMeas table |
| 1.3.6.1.4.1.20044.37.3.2.32.1.1 | Columnpm1004dcpMesrbiasMeasIndex | read-only | current | Index definition for the pm1004dcpMesrbiasMeas table |
| 1.3.6.1.4.1.20044.37.3.2.32.1.2 | Columnpm1004dcpMesrbiasMeasPortn | read-only | current | Client SFP Laser Bias :This OID gives the bias value of the SFP plugged into port, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/500) (Unit = mA… |
| 1.3.6.1.4.1.20044.37.3.2.40 | Tablepm1004dcpMesrtxpwrMeasTable | not-accessible | current | List of pm1004dcpMesrtxpwrMeas Article |
| 1.3.6.1.4.1.20044.37.3.2.40.1 | Rowpm1004dcpMesrtxpwrMeasEntry | not-accessible | current | Row definition for the pm1004dcpMesrtxpwrMeas table |
| 1.3.6.1.4.1.20044.37.3.2.40.1.1 | Columnpm1004dcpMesrtxpwrMeasIndex | read-only | current | Index definition for the pm1004dcpMesrtxpwrMeas table |
| 1.3.6.1.4.1.20044.37.3.2.40.1.2 | Columnpm1004dcpMesrtxpwrMeasPortn | read-only | current | Client SFP Tx Power :This OID gives the transmit power value of the SFP plugged into port, read from the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV… |
| 1.3.6.1.4.1.20044.37.3.2.48 | Tablepm1004dcpMesrrxpwrMeasTable | not-accessible | current | List of pm1004dcpMesrrxpwrMeas Article |
| 1.3.6.1.4.1.20044.37.3.2.48.1 | Rowpm1004dcpMesrrxpwrMeasEntry | not-accessible | current | Row definition for the pm1004dcpMesrrxpwrMeas table |
| 1.3.6.1.4.1.20044.37.3.2.48.1.1 | Columnpm1004dcpMesrrxpwrMeasIndex | read-only | current | Index definition for the pm1004dcpMesrrxpwrMeas table |
| 1.3.6.1.4.1.20044.37.3.2.48.1.2 | Columnpm1004dcpMesrrxpwrMeasPortn | read-only | current | Client SFP Rx Power :This OID gives the receive power value of the SFP plugged into port, read in the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-4… |
| 1.3.6.1.4.1.20044.37.3.3 | Nodepm1004dcpMesrLine | |||
| 1.3.6.1.4.1.20044.37.3.3.208 | Tablepm1004dcpMesrxfp1LxModTempMeasTable | not-accessible | current | List of pm1004dcpMesrxfp1LxModTempMeas Article |
| 1.3.6.1.4.1.20044.37.3.3.208.1 | Rowpm1004dcpMesrxfp1LxModTempMeasEntry | not-accessible | current | Row definition for the pm1004dcpMesrxfp1LxModTempMeas table |
| 1.3.6.1.4.1.20044.37.3.3.208.1.1 | Columnpm1004dcpMesrxfp1LxModTempMeasIndex | read-only | current | Index definition for the pm1004dcpMesrxfp1LxModTempMeas table |
| 1.3.6.1.4.1.20044.37.3.3.208.1.2 | Columnpm1004dcpMesrxfp1LxModTempMeasPortn | read-only | current | Line Optical Module Temperature :This OID gives the temperature of the XFP or OTX plugged in line#n, read from the DDM (Digital Diagnostic Monitoring) (Tempera… |
| 1.3.6.1.4.1.20044.37.3.3.209 | Tablepm1004dcpMesrxfp1ReservedTable | not-accessible | deprecated | List of pm1004dcpMesrxfp1Reserved Article |
| 1.3.6.1.4.1.20044.37.3.3.209.1 | Rowpm1004dcpMesrxfp1ReservedEntry | not-accessible | deprecated | Row definition for the pm1004dcpMesrxfp1Reserved table |
| 1.3.6.1.4.1.20044.37.3.3.209.1.1 | Columnpm1004dcpMesrxfp1ReservedIndex | read-only | deprecated | Index definition for the pm1004dcpMesrxfp1Reserved table |
| 1.3.6.1.4.1.20044.37.3.3.209.1.2 | Columnpm1004dcpMesrxfp1ReservedPortn | read-only | deprecated | Not Used :Reserved |
| 1.3.6.1.4.1.20044.37.3.3.210 | Tablepm1004dcpMesrxfp1LoBiasCurrentMeasTable | not-accessible | current | List of pm1004dcpMesrxfp1LoBiasCurrentMeas Article |
| 1.3.6.1.4.1.20044.37.3.3.210.1 | Rowpm1004dcpMesrxfp1LoBiasCurrentMeasEntry | not-accessible | current | Row definition for the pm1004dcpMesrxfp1LoBiasCurrentMeas table |
| 1.3.6.1.4.1.20044.37.3.3.210.1.1 | Columnpm1004dcpMesrxfp1LoBiasCurrentMeasIndex | read-only | current | Index definition for the pm1004dcpMesrxfp1LoBiasCurrentMeas table |
| 1.3.6.1.4.1.20044.37.3.3.210.1.2 | Columnpm1004dcpMesrxfp1LoBiasCurrentMeasPortn | read-only | current | Line Optical Module Laser Bias :This OID gives the bias value of the XFP or OTX plugged in line #n, read from the DDM (Digital Diagnostic Monitoring) (Bias = A… |
| 1.3.6.1.4.1.20044.37.3.3.211 | Tablepm1004dcpMesrxfp1LoTxPowerMeasTable | not-accessible | current | List of pm1004dcpMesrxfp1LoTxPowerMeas Article |
| 1.3.6.1.4.1.20044.37.3.3.211.1 | Rowpm1004dcpMesrxfp1LoTxPowerMeasEntry | not-accessible | current | Row definition for the pm1004dcpMesrxfp1LoTxPowerMeas table |
| 1.3.6.1.4.1.20044.37.3.3.211.1.1 | Columnpm1004dcpMesrxfp1LoTxPowerMeasIndex | read-only | current | Index definition for the pm1004dcpMesrxfp1LoTxPowerMeas table |
| 1.3.6.1.4.1.20044.37.3.3.211.1.2 | Columnpm1004dcpMesrxfp1LoTxPowerMeasPortn | read-only | current | Line Optical Module Tx Power :This OID gives the transmit power value of the XFP or OTX plugged in line #n, read from the DDM (Digital Diagnostic Monitoring) (… |
| 1.3.6.1.4.1.20044.37.3.3.212 | Tablepm1004dcpMesrxfp1LiRxPowerMeasTable | not-accessible | current | List of pm1004dcpMesrxfp1LiRxPowerMeas Article |
| 1.3.6.1.4.1.20044.37.3.3.212.1 | Rowpm1004dcpMesrxfp1LiRxPowerMeasEntry | not-accessible | current | Row definition for the pm1004dcpMesrxfp1LiRxPowerMeas table |
| 1.3.6.1.4.1.20044.37.3.3.212.1.1 | Columnpm1004dcpMesrxfp1LiRxPowerMeasIndex | read-only | current | Index definition for the pm1004dcpMesrxfp1LiRxPowerMeas table |
| 1.3.6.1.4.1.20044.37.3.3.212.1.2 | Columnpm1004dcpMesrxfp1LiRxPowerMeasPortn | read-only | current | Line Optical Module Rx Power :This OID gives the receive power value of the XFP or OTX plugged in line #n, read from the DDM (Digital Diagnostic Monitoring) (P… |
| 1.3.6.1.4.1.20044.37.3.3.213 | Tablepm1004dcpMesrxfp1LxAux1MeasTable | not-accessible | deprecated | List of pm1004dcpMesrxfp1LxAux1Meas Article |
| 1.3.6.1.4.1.20044.37.3.3.213.1 | Rowpm1004dcpMesrxfp1LxAux1MeasEntry | not-accessible | deprecated | Row definition for the pm1004dcpMesrxfp1LxAux1Meas table |
| 1.3.6.1.4.1.20044.37.3.3.213.1.1 | Columnpm1004dcpMesrxfp1LxAux1MeasIndex | read-only | deprecated | Index definition for the pm1004dcpMesrxfp1LxAux1Meas table |
| 1.3.6.1.4.1.20044.37.3.3.213.1.2 | Columnpm1004dcpMesrxfp1LxAux1MeasPortn | read-only | deprecated | Not Used :This OID gives the receive power value read in the DDM (Digital Diagnostic Monitoring) of the XFP or OTX plugged in line #n (Unit = ?) |
| 1.3.6.1.4.1.20044.37.3.3.214 | Tablepm1004dcpMesrxfp1LxAux2MeasTable | not-accessible | deprecated | List of pm1004dcpMesrxfp1LxAux2Meas Article |
| 1.3.6.1.4.1.20044.37.3.3.214.1 | Rowpm1004dcpMesrxfp1LxAux2MeasEntry | not-accessible | deprecated | Row definition for the pm1004dcpMesrxfp1LxAux2Meas table |
| 1.3.6.1.4.1.20044.37.3.3.214.1.1 | Columnpm1004dcpMesrxfp1LxAux2MeasIndex | read-only | deprecated | Index definition for the pm1004dcpMesrxfp1LxAux2Meas table |
| 1.3.6.1.4.1.20044.37.3.3.214.1.2 | Columnpm1004dcpMesrxfp1LxAux2MeasPortn | read-only | deprecated | Not Used :This OID gives the receive power value read in the DDM (Digital Diagnostic Monitoring) of the XFP or OTX plugged in line #n (Unit = ?) |
| 1.3.6.1.4.1.20044.37.3.3.224 | Tablepm1004dcpMesrotx1AgingTable | not-accessible | current | List of pm1004dcpMesrotx1Aging Article |
| 1.3.6.1.4.1.20044.37.3.3.224.1 | Rowpm1004dcpMesrotx1AgingEntry | not-accessible | current | Row definition for the pm1004dcpMesrotx1Aging table |
| 1.3.6.1.4.1.20044.37.3.3.224.1.1 | Columnpm1004dcpMesrotx1AgingIndex | read-only | current | Index definition for the pm1004dcpMesrotx1Aging table |
| 1.3.6.1.4.1.20044.37.3.3.224.1.2 | Columnpm1004dcpMesrotx1AgingPortn | read-only | current | Line OTX TLH Aging :This OID gives the aging of the Line OTX TLH, read from the DDM (Digital Diagnostic Monitoring) (Aging = AV) (Unit = %) <Help> This measure… |
| 1.3.6.1.4.1.20044.37.3.3.225 | Tablepm1004dcpMesrotx1LaserTemperatureTable | not-accessible | deprecated | List of pm1004dcpMesrotx1LaserTemperature Article |
| 1.3.6.1.4.1.20044.37.3.3.225.1 | Rowpm1004dcpMesrotx1LaserTemperatureEntry | not-accessible | deprecated | Row definition for the pm1004dcpMesrotx1LaserTemperature table |
| 1.3.6.1.4.1.20044.37.3.3.225.1.1 | Columnpm1004dcpMesrotx1LaserTemperatureIndex | read-only | deprecated | Index definition for the pm1004dcpMesrotx1LaserTemperature table |
| 1.3.6.1.4.1.20044.37.3.3.225.1.2 | Columnpm1004dcpMesrotx1LaserTemperaturePortn | read-only | deprecated | Line OTX TLH Laser Temperature :This OID gives the laser temperature of the Line OTX TLH, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/2… |
| 1.3.6.1.4.1.20044.37.3.3.226 | Tablepm1004dcpMesrotx1FreqDeviationTable | not-accessible | current | List of pm1004dcpMesrotx1FreqDeviation Article |
| 1.3.6.1.4.1.20044.37.3.3.226.1 | Rowpm1004dcpMesrotx1FreqDeviationEntry | not-accessible | current | Row definition for the pm1004dcpMesrotx1FreqDeviation table |
| 1.3.6.1.4.1.20044.37.3.3.226.1.1 | Columnpm1004dcpMesrotx1FreqDeviationIndex | read-only | current | Index definition for the pm1004dcpMesrotx1FreqDeviation table |
| 1.3.6.1.4.1.20044.37.3.3.226.1.2 | Columnpm1004dcpMesrotx1FreqDeviationPortn | read-only | current | Line OTX TLH Frequency Deviation :This OID gives the frequency deviation of the Line OTX TLH, read from the DDM (Digital Diagnostic Monitoring) (Deviation = (A… |
| 1.3.6.1.4.1.20044.37.3.3.227 | Tablepm1004dcpMesrotx1LaserWvlengthTable | not-accessible | current | List of pm1004dcpMesrotx1LaserWvlength Article |
| 1.3.6.1.4.1.20044.37.3.3.227.1 | Rowpm1004dcpMesrotx1LaserWvlengthEntry | not-accessible | current | Row definition for the pm1004dcpMesrotx1LaserWvlength table |
| 1.3.6.1.4.1.20044.37.3.3.227.1.1 | Columnpm1004dcpMesrotx1LaserWvlengthIndex | read-only | current | Index definition for the pm1004dcpMesrotx1LaserWvlength table |
| 1.3.6.1.4.1.20044.37.3.3.227.1.2 | Columnpm1004dcpMesrotx1LaserWvlengthPortn | read-only | current | Line Optical Module Wavelength :This OID gives the laser wavelength of the Line OTX TLH, read from the DDM (Digital Diagnostic Monitoring) (Wavelength=29979245… |
| 1.3.6.1.4.1.20044.37.4 | Nodepm1004dcpcounters | |||
| 1.3.6.1.4.1.20044.37.4.1 | Nodepm1004dcpCntOther | |||
| 1.3.6.1.4.1.20044.37.4.2 | Nodepm1004dcpCntClient | |||
| 1.3.6.1.4.1.20044.37.4.2.16 | Tablepm1004dcpCntupRaRemCntTable | not-accessible | current | List of pm1004dcpCntupRaRemCnt Article |
| 1.3.6.1.4.1.20044.37.4.2.16.1 | Rowpm1004dcpCntupRaRemCntEntry | not-accessible | current | Row definition for the pm1004dcpCntupRaRemCnt table |
| 1.3.6.1.4.1.20044.37.4.2.16.1.1 | Columnpm1004dcpCntupRaRemCntIndex | read-only | current | Index definition for the pm1004dcpCntupRaRemCnt table |
| 1.3.6.1.4.1.20044.37.4.2.16.1.2 | Columnpm1004dcpCntupRaRemCntValuePortn | read-only | current | Client Rate Adapt. Words Removal :This counter is incremented each time a rate adaptation 10B word is removed from the Client input stream |
| 1.3.6.1.4.1.20044.37.4.2.16.1.3 | Columnpm1004dcpCntupRaRemCntErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the rate adaptation removal counter value is invalid on Port |
| 1.3.6.1.4.1.20044.37.4.2.16.1.4 | Columnpm1004dcpCntupRaRemCntOverloadPortn | read-only | current | Client Counter Overload :This OID when set indicates a rate adaptation removal counter overload on Port |
| 1.3.6.1.4.1.20044.37.4.2.24 | Tablepm1004dcpCntupRaInsCntTable | not-accessible | current | List of pm1004dcpCntupRaInsCnt Article |
| 1.3.6.1.4.1.20044.37.4.2.24.1 | Rowpm1004dcpCntupRaInsCntEntry | not-accessible | current | Row definition for the pm1004dcpCntupRaInsCnt table |
| 1.3.6.1.4.1.20044.37.4.2.24.1.1 | Columnpm1004dcpCntupRaInsCntIndex | read-only | current | Index definition for the pm1004dcpCntupRaInsCnt table |
| 1.3.6.1.4.1.20044.37.4.2.24.1.2 | Columnpm1004dcpCntupRaInsCntValuePortn | read-only | current | Client Rate Adapt. Words Insertion :This counter is incremented each time a rate adaptation 10B word is inserted in the Client input stream |
| 1.3.6.1.4.1.20044.37.4.2.24.1.3 | Columnpm1004dcpCntupRaInsCntErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the rate adaptation insertion counter value is invalid on Port |
| 1.3.6.1.4.1.20044.37.4.2.24.1.4 | Columnpm1004dcpCntupRaInsCntOverloadPortn | read-only | current | Client Counter Overload :This OID when set indicates a rate adaptation insertion counter overload on Port |
| 1.3.6.1.4.1.20044.37.4.2.32 | Tablepm1004dcpCntupRdErrCntTable | not-accessible | current | List of pm1004dcpCntupRdErrCnt Article |
| 1.3.6.1.4.1.20044.37.4.2.32.1 | Rowpm1004dcpCntupRdErrCntEntry | not-accessible | current | Row definition for the pm1004dcpCntupRdErrCnt table |
| 1.3.6.1.4.1.20044.37.4.2.32.1.1 | Columnpm1004dcpCntupRdErrCntIndex | read-only | current | Index definition for the pm1004dcpCntupRdErrCnt table |
| 1.3.6.1.4.1.20044.37.4.2.32.1.2 | Columnpm1004dcpCntupRdErrCntValuePortn | read-only | current | Client Input Errors :This counter is increased each time a 10b/8b running disparity error is detected on the Client input stream <Help> This counter gives the … |
| 1.3.6.1.4.1.20044.37.4.2.32.1.3 | Columnpm1004dcpCntupRdErrCntErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the client error counter value is invalid on Port |
| 1.3.6.1.4.1.20044.37.4.2.32.1.4 | Columnpm1004dcpCntupRdErrCntOverloadPortn | read-only | current | Client Counter Overload :This OID when set indicates a client input error counter overload on Port |
| 1.3.6.1.4.1.20044.37.4.2.40 | Tablepm1004dcpCntupTimCntTable | not-accessible | current | List of pm1004dcpCntupTimCnt Article |
| 1.3.6.1.4.1.20044.37.4.2.40.1 | Rowpm1004dcpCntupTimCntEntry | not-accessible | current | Row definition for the pm1004dcpCntupTimCnt table |
| 1.3.6.1.4.1.20044.37.4.2.40.1.1 | Columnpm1004dcpCntupTimCntIndex | read-only | current | Index definition for the pm1004dcpCntupTimCnt table |
| 1.3.6.1.4.1.20044.37.4.2.40.1.2 | Columnpm1004dcpCntupTimCntValuePortn | read-only | current | Client Upstream Timer Counter :This is the timing counter dedicated to the upstream access counters. It is incremented every 125 us. |
| 1.3.6.1.4.1.20044.37.4.2.40.1.3 | Columnpm1004dcpCntupTimCntErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the upstream timing counter value is invalid on Port |
| 1.3.6.1.4.1.20044.37.4.2.40.1.4 | Columnpm1004dcpCntupTimCntOverloadPortn | read-only | current | Client Counter Overload :This OID when set indicates a upstream timing counter overload on Port |
| 1.3.6.1.4.1.20044.37.4.2.48 | Tablepm1004dcpCntupCvErrCntTable | not-accessible | current | List of pm1004dcpCntupCvErrCnt Article |
| 1.3.6.1.4.1.20044.37.4.2.48.1 | Rowpm1004dcpCntupCvErrCntEntry | not-accessible | current | Row definition for the pm1004dcpCntupCvErrCnt table |
| 1.3.6.1.4.1.20044.37.4.2.48.1.1 | Columnpm1004dcpCntupCvErrCntIndex | read-only | current | Index definition for the pm1004dcpCntupCvErrCnt table |
| 1.3.6.1.4.1.20044.37.4.2.48.1.2 | Columnpm1004dcpCntupCvErrCntValuePortn | read-only | current | Client Coding Violation Counter :This counter is increased each time a 10b/8b coding violation is detected on the Client input stream |
| 1.3.6.1.4.1.20044.37.4.2.48.1.3 | Columnpm1004dcpCntupCvErrCntErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the coding violation counter value is invalid on Port |
| 1.3.6.1.4.1.20044.37.4.2.48.1.4 | Columnpm1004dcpCntupCvErrCntOverloadPortn | read-only | current | Client Counter Overload :This OID when set indicates a coding violation counter overload on Port |
| 1.3.6.1.4.1.20044.37.4.2.64 | Tablepm1004dcpCntdwCbipCntTable | not-accessible | current | List of pm1004dcpCntdwCbipCnt Article |
| 1.3.6.1.4.1.20044.37.4.2.64.1 | Rowpm1004dcpCntdwCbipCntEntry | not-accessible | current | Row definition for the pm1004dcpCntdwCbipCnt table |
| 1.3.6.1.4.1.20044.37.4.2.64.1.1 | Columnpm1004dcpCntdwCbipCntIndex | read-only | current | Index definition for the pm1004dcpCntdwCbipCnt table |
| 1.3.6.1.4.1.20044.37.4.2.64.1.2 | Columnpm1004dcpCntdwCbipCntValuePortn | read-only | current | Client Output Errors :This counter is incremented each time a CBIP parity error is detected on the Client output stream <Help> This counter gives the number of… |
| 1.3.6.1.4.1.20044.37.4.2.64.1.3 | Columnpm1004dcpCntdwCbipCntErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the CBIP error counter value is invalid on Port |
| 1.3.6.1.4.1.20044.37.4.2.64.1.4 | Columnpm1004dcpCntdwCbipCntOverloadPortn | read-only | current | Client CBIP Counter Overload :This OID when set indicates a CBIP error counter overload on Port |
| 1.3.6.1.4.1.20044.37.4.2.72 | Tablepm1004dcpCntdwTimCntTable | not-accessible | current | List of pm1004dcpCntdwTimCnt Article |
| 1.3.6.1.4.1.20044.37.4.2.72.1 | Rowpm1004dcpCntdwTimCntEntry | not-accessible | current | Row definition for the pm1004dcpCntdwTimCnt table |
| 1.3.6.1.4.1.20044.37.4.2.72.1.1 | Columnpm1004dcpCntdwTimCntIndex | read-only | current | Index definition for the pm1004dcpCntdwTimCnt table |
| 1.3.6.1.4.1.20044.37.4.2.72.1.2 | Columnpm1004dcpCntdwTimCntValuePortn | read-only | current | Client Downstream Timer Counter :This is the timing counter dedicated to the downstream access counters. It is incremented every 125 us. |
| 1.3.6.1.4.1.20044.37.4.2.72.1.3 | Columnpm1004dcpCntdwTimCntErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the downstream timer counter value is invalid on Port |
| 1.3.6.1.4.1.20044.37.4.2.72.1.4 | Columnpm1004dcpCntdwTimCntOverloadPortn | read-only | current | Client Counter Overload :This OID when set indicates a downstream timer counter overload on Port |
| 1.3.6.1.4.1.20044.37.4.3 | Nodepm1004dcpCntLine | |||
| 1.3.6.1.4.1.20044.37.4.3.152 | Tablepm1004dcpCntdfrmB1ErrCntTable | not-accessible | current | List of pm1004dcpCntdfrmB1ErrCnt Article |
| 1.3.6.1.4.1.20044.37.4.3.152.1 | Rowpm1004dcpCntdfrmB1ErrCntEntry | not-accessible | current | Row definition for the pm1004dcpCntdfrmB1ErrCnt table |
| 1.3.6.1.4.1.20044.37.4.3.152.1.1 | Columnpm1004dcpCntdfrmB1ErrCntIndex | read-only | current | Index definition for the pm1004dcpCntdfrmB1ErrCnt table |
| 1.3.6.1.4.1.20044.37.4.3.152.1.2 | Columnpm1004dcpCntdfrmB1ErrCntValuePortn | read-only | current | Line Input SM-BIP8 Errors :This counter is incremented each time a SM BIP error is detected on the Deframer input stream. <Help> This counter gives the number … |
| 1.3.6.1.4.1.20044.37.4.3.152.1.3 | Columnpm1004dcpCntdfrmB1ErrCntErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the SM BIP error counter value is invalid on Port |
| 1.3.6.1.4.1.20044.37.4.3.152.1.4 | Columnpm1004dcpCntdfrmB1ErrCntOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a SM BIP error counter overload on Port |
| 1.3.6.1.4.1.20044.37.4.3.153 | Tablepm1004dcpCntdfrmTimCntTable | not-accessible | current | List of pm1004dcpCntdfrmTimCnt Article |
| 1.3.6.1.4.1.20044.37.4.3.153.1 | Rowpm1004dcpCntdfrmTimCntEntry | not-accessible | current | Row definition for the pm1004dcpCntdfrmTimCnt table |
| 1.3.6.1.4.1.20044.37.4.3.153.1.1 | Columnpm1004dcpCntdfrmTimCntIndex | read-only | current | Index definition for the pm1004dcpCntdfrmTimCnt table |
| 1.3.6.1.4.1.20044.37.4.3.153.1.2 | Columnpm1004dcpCntdfrmTimCntValuePortn | read-only | current | Line Timer Counter :This is the timing counter dedicated to the downstream deframer counters. It is incremented every 125 us. |
| 1.3.6.1.4.1.20044.37.4.3.153.1.3 | Columnpm1004dcpCntdfrmTimCntErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port |
| 1.3.6.1.4.1.20044.37.4.3.153.1.4 | Columnpm1004dcpCntdfrmTimCntOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port |
| 1.3.6.1.4.1.20044.37.4.3.154 | Tablepm1004dcpCntdfrmPrimLineErrCntTable | not-accessible | current | List of pm1004dcpCntdfrmPrimLineErrCnt Article |
| 1.3.6.1.4.1.20044.37.4.3.154.1 | Rowpm1004dcpCntdfrmPrimLineErrCntEntry | not-accessible | current | Row definition for the pm1004dcpCntdfrmPrimLineErrCnt table |
| 1.3.6.1.4.1.20044.37.4.3.154.1.1 | Columnpm1004dcpCntdfrmPrimLineErrCntIndex | read-only | current | Index definition for the pm1004dcpCntdfrmPrimLineErrCnt table |
| 1.3.6.1.4.1.20044.37.4.3.154.1.2 | Columnpm1004dcpCntdfrmPrimLineErrCntValuePortn | read-only | current | Line Input FEC Corrected Errors :This counter is incremented each time the FEC is correcting an error on the line input stream. <Help> This counter gives the n… |
| 1.3.6.1.4.1.20044.37.4.3.154.1.3 | Columnpm1004dcpCntdfrmPrimLineErrCntErrorPortn | read-only | current | FEC Counter Error :This bit when set indicates the FEC corrected errors counter value is invalid on Line |
| 1.3.6.1.4.1.20044.37.4.3.154.1.4 | Columnpm1004dcpCntdfrmPrimLineErrCntOverloadPortn | read-only | current | FEC Counter Overload :This bit when set indicates a FEC corrected errors counter overload on Line |
| 1.3.6.1.4.1.20044.37.4.259 | Scalarpm1004dcpCntCountersReset | read-write | current | Counters Reset:This OID resets and restarts all the counters |
| 1.3.6.1.4.1.20044.37.4.260 | Scalarpm1004dcpCntCountersStop | read-write | current | Counters stop:This OID stops all the counters |
| 1.3.6.1.4.1.20044.37.6 | Nodepm1004dcpcontrolsWrite | |||
| 1.3.6.1.4.1.20044.37.6.1 | Nodepm1004dcpCtrlOther | |||
| 1.3.6.1.4.1.20044.37.6.1.1 | Nodepm1004dcpCtrlconfMgnt1 | |||
| 1.3.6.1.4.1.20044.37.6.1.1.1 | Scalarpm1004dcpCtrlConf1Load1 | read-write | current | Load Configuration Tables Set Nb 1 :When set this OID enables loading from flash configuration1 into the PM. |
| 1.3.6.1.4.1.20044.37.6.1.1.2 | Scalarpm1004dcpCtrlConf2Load1 | read-write | current | Load Configuration Tables Set Nb 2 :When set this OID enables loading from flash configuration2 into the PM. |
| 1.3.6.1.4.1.20044.37.6.1.1.10 | Scalarpm1004dcpCtrlConf2Flash1 | read-write | current | Write Configuration Tables :This OID saves the current configuration of the PM as configuration2 in the flash. <Help> This control saves the customer configura… |
| 1.3.6.1.4.1.20044.37.6.1.1.14 | Scalarpm1004dcpCtrlConf2Clear1 | read-write | current | Clear Configuration Tables :This OID clears the configuration tables from configuration2 in the flash. <Help> This control restores the default configuration o… |
| 1.3.6.1.4.1.20044.37.6.1.4 | Nodepm1004dcpCtrlsynth4 | |||
| 1.3.6.1.4.1.20044.37.6.1.4.1 | Scalarpm1004dcpCtrlCorrelatOn | read-write | current | Enable Alarm Correlation :This OID enables the alarm correlation in the PM. |
| 1.3.6.1.4.1.20044.37.6.1.4.2 | Scalarpm1004dcpCtrlCorrelatOff | read-write | current | Disable Alarm Correlation :This OID disables the alarm correlation in the PM. |
| 1.3.6.1.4.1.20044.37.6.1.5 | Nodepm1004dcpCtrlswMgnt | |||
| 1.3.6.1.4.1.20044.37.6.1.5.2 | Scalarpm1004dcpCtrlColdReset | read-write | current | PM Cold Reset :This OID, when set, causes a cold reset of the PM. This reset is traffic affecting, and the configuration of PM is reloaded on start-up. <Help> … |
| 1.3.6.1.4.1.20044.37.6.1.5.3 | Scalarpm1004dcpCtrlWarmReset | read-write | current | PM Warm Reset :This OID, when set, causes a warm reset of the PM. This reset is not traffic affecting, and the configuration of PM remains unchanged. <Help> Th… |
| 1.3.6.1.4.1.20044.37.6.1.5.5 | Scalarpm1004dcpCtrlLoadSwBank1 | read-write | current | Set Software Nb 1 As Active :This OID, when set, loads the SW from bank1 into the PM. It must be followed by a reset. <Help> This controls selects the first SW… |
| 1.3.6.1.4.1.20044.37.6.1.5.6 | Scalarpm1004dcpCtrlLoadSwBank2 | read-write | current | Set Software Nb 2 As Active :This OID, when set, loads the SW from bank2 into the PM. It must be followed by a reset. <Help> This controls selects the second S… |
| 1.3.6.1.4.1.20044.37.6.1.6 | Nodepm1004dcpCtrlgwMgnt | |||
| 1.3.6.1.4.1.20044.37.6.1.6.1 | Scalarpm1004dcpCtrlCurrentGwReset | read-write | current | Active Gateware Reset :This OID, when set, resets the active gateware. It is traffic affecting. |
| 1.3.6.1.4.1.20044.37.6.1.6.5 | Scalarpm1004dcpCtrlLoadGwBank1 | read-write | current | Set Gateware Nb 1 As Active :This OID, when set, loads the GW from bank1 (Flash) into the PM. It is followed by an automatic gateware cold reset. <Help> This c… |
| 1.3.6.1.4.1.20044.37.6.1.6.6 | Scalarpm1004dcpCtrlLoadGwBank2 | read-write | current | Set Gateware Nb 2 As Active :This OID, when set, loads the GW from bank2 (Flash) into the PM. It is followed by an automatic gateware cold reset. |
| 1.3.6.1.4.1.20044.37.6.1.6.7 | Scalarpm1004dcpCtrlLoadGwBank3 | read-write | current | Set Gateware Nb 3 As Active :This OID, when set, loads the GW from bank3 (Flash) into the PM. It is followed by an automatic gateware cold reset. <Help> This c… |
| 1.3.6.1.4.1.20044.37.6.1.6.8 | Scalarpm1004dcpCtrlLoadGwBank4 | read-write | current | Set Gateware Nb 4 As Active :This OID, when set, loads the GW from bank4 (Flash) into the PM. It is followed by an automatic gateware cold reset. |
| 1.3.6.1.4.1.20044.37.6.1.192 | Nodepm1004dcpCtrlledTest | |||
| 1.3.6.1.4.1.20044.37.6.1.192.1 | Scalarpm1004dcpCtrlGreenLed | read-write | current | Green Leds Test :This OID switches on all the green Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to green |
| 1.3.6.1.4.1.20044.37.6.1.192.2 | Scalarpm1004dcpCtrlRedLed | read-write | current | Red Leds Test :This OID switches on all the red Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to red |
| 1.3.6.1.4.1.20044.37.6.1.192.3 | Scalarpm1004dcpCtrlLedOff | read-write | current | Leds Off :This OID switches off all the Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to OFF |
| 1.3.6.1.4.1.20044.37.6.1.193 | Nodepm1004dcpCtrlmoduleOosMode | |||
| 1.3.6.1.4.1.20044.37.6.1.193.1 | Scalarpm1004dcpCtrlModuleOosMode | read-write | current | PM Out Of Service :This OID sets the PM Out Of Service <Help> This control defines the service state of the complete module |
| 1.3.6.1.4.1.20044.37.6.1.196 | Scalarpm1004dcpCtrlmoduleDccMgnt | read-write | current | DCC Mode :This OID defines the DCC mode of the PM (No DCC, Master, Slave Line 1&2, Terminal Line 1, Terminal Line 2, Terminal Line 1&2) <Help> This control def… |
| 1.3.6.1.4.1.20044.37.6.1.197 | Nodepm1004dcpCtrlmaintenanceMode | |||
| 1.3.6.1.4.1.20044.37.6.1.197.1 | Scalarpm1004dcpCtrlMaintenanceMode | read-write | current | Module Maintenance Mode :This OID enables the maintenance mode on the PM. <Help> This control enables the maintenance mode on the PM. |
| 1.3.6.1.4.1.20044.37.6.2 | Nodepm1004dcpCtrlClient | |||
| 1.3.6.1.4.1.20044.37.6.2.16 | Tablepm1004dcpCtrlaccessLoopTable | not-accessible | current | List of pm1004dcpCtrlaccessLoop Article |
| 1.3.6.1.4.1.20044.37.6.2.16.1 | Rowpm1004dcpCtrlaccessLoopEntry | not-accessible | current | Row definition for the pm1004dcpCtrlaccessLoop table |
| 1.3.6.1.4.1.20044.37.6.2.16.1.1 | Columnpm1004dcpCtrlaccessLoopIndex | read-only | current | Index definition for the pm1004dcpCtrlaccessLoop table |
| 1.3.6.1.4.1.20044.37.6.2.16.1.2 | Columnpm1004dcpCtrlaccessLoopPortn | read-write | current | Client Facility Loopback :This OID operates a Client Facility Loopback, looping client input signal on the client output port. The loop is located on the clien… |
| 1.3.6.1.4.1.20044.37.6.2.18 | Tablepm1004dcpCtrlportOosModeTable | not-accessible | current | List of pm1004dcpCtrlportOosMode Article |
| 1.3.6.1.4.1.20044.37.6.2.18.1 | Rowpm1004dcpCtrlportOosModeEntry | not-accessible | current | Row definition for the pm1004dcpCtrlportOosMode table |
| 1.3.6.1.4.1.20044.37.6.2.18.1.1 | Columnpm1004dcpCtrlportOosModeIndex | read-only | current | Index definition for the pm1004dcpCtrlportOosMode table |
| 1.3.6.1.4.1.20044.37.6.2.18.1.2 | Columnpm1004dcpCtrlportOosModePortn | read-write | current | Client Port Out Of Service :This OID sets the client port Out Of Service <Help> This controls defines the service state of the client port |
| 1.3.6.1.4.1.20044.37.6.2.19 | Tablepm1004dcpCtrlsfpOnCtrlTable | not-accessible | current | List of pm1004dcpCtrlsfpOnCtrl Article |
| 1.3.6.1.4.1.20044.37.6.2.19.1 | Rowpm1004dcpCtrlsfpOnCtrlEntry | not-accessible | current | Row definition for the pm1004dcpCtrlsfpOnCtrl table |
| 1.3.6.1.4.1.20044.37.6.2.19.1.1 | Columnpm1004dcpCtrlsfpOnCtrlIndex | read-only | current | Index definition for the pm1004dcpCtrlsfpOnCtrl table |
| 1.3.6.1.4.1.20044.37.6.2.19.1.2 | Columnpm1004dcpCtrlsfpOnCtrlPortn | read-write | current | Client SFP Optical Laser ON :This OID switches on the SFP. |
| 1.3.6.1.4.1.20044.37.6.2.20 | Tablepm1004dcpCtrlsfpOffCtrlTable | not-accessible | current | List of pm1004dcpCtrlsfpOffCtrl Article |
| 1.3.6.1.4.1.20044.37.6.2.20.1 | Rowpm1004dcpCtrlsfpOffCtrlEntry | not-accessible | current | Row definition for the pm1004dcpCtrlsfpOffCtrl table |
| 1.3.6.1.4.1.20044.37.6.2.20.1.1 | Columnpm1004dcpCtrlsfpOffCtrlIndex | read-only | current | Index definition for the pm1004dcpCtrlsfpOffCtrl table |
| 1.3.6.1.4.1.20044.37.6.2.20.1.2 | Columnpm1004dcpCtrlsfpOffCtrlPortn | read-write | current | Client SFP Laser Shutdown :This OID switches off the SFP. <Help> This control defines the laser state of the client transceiver |
| 1.3.6.1.4.1.20044.37.6.2.21 | Tablepm1004dcpCtrlcsfUpInsTable | not-accessible | current | List of pm1004dcpCtrlcsfUpIns Article |
| 1.3.6.1.4.1.20044.37.6.2.21.1 | Rowpm1004dcpCtrlcsfUpInsEntry | not-accessible | current | Row definition for the pm1004dcpCtrlcsfUpIns table |
| 1.3.6.1.4.1.20044.37.6.2.21.1.1 | Columnpm1004dcpCtrlcsfUpInsIndex | read-only | current | Index definition for the pm1004dcpCtrlcsfUpIns table |
| 1.3.6.1.4.1.20044.37.6.2.21.1.2 | Columnpm1004dcpCtrlcsfUpInsPortn | read-write | current | Client Signal Fail Insertion :This OID, when set, inserts a client signal fail in the upstream client Port. <Help> This control inserts a Client Signal Fail fo… |
| 1.3.6.1.4.1.20044.37.6.2.22 | Tablepm1004dcpCtrlcaisDwInsTable | not-accessible | current | List of pm1004dcpCtrlcaisDwIns Article |
| 1.3.6.1.4.1.20044.37.6.2.22.1 | Rowpm1004dcpCtrlcaisDwInsEntry | not-accessible | current | Row definition for the pm1004dcpCtrlcaisDwIns table |
| 1.3.6.1.4.1.20044.37.6.2.22.1.1 | Columnpm1004dcpCtrlcaisDwInsIndex | read-only | current | Index definition for the pm1004dcpCtrlcaisDwIns table |
| 1.3.6.1.4.1.20044.37.6.2.22.1.2 | Columnpm1004dcpCtrlcaisDwInsPortn | read-write | current | Client AIS Insertion :This OID, when set, inserts a client AIS on the downstream client Port. <Help> This control inserts a Client AIS for the client port |
| 1.3.6.1.4.1.20044.37.6.2.26 | Tablepm1004dcpCtrlclientAccessTermLoopTable | not-accessible | current | List of pm1004dcpCtrlclientAccessTermLoop Article |
| 1.3.6.1.4.1.20044.37.6.2.26.1 | Rowpm1004dcpCtrlclientAccessTermLoopEntry | not-accessible | current | Row definition for the pm1004dcpCtrlclientAccessTermLoop table |
| 1.3.6.1.4.1.20044.37.6.2.26.1.1 | Columnpm1004dcpCtrlclientAccessTermLoopIndex | read-only | current | Index definition for the pm1004dcpCtrlclientAccessTermLoop table |
| 1.3.6.1.4.1.20044.37.6.2.26.1.2 | Columnpm1004dcpCtrlclientAccessTermLoopPortn | read-write | current | Client Terminal Loopback :This OID operates a Client Terminal Loopback, looping client input signal on the client output port. The loop is located on the line … |
| 1.3.6.1.4.1.20044.37.6.2.35 | Tablepm1004dcpCtrlresetCount15PortTable | not-accessible | current | List of pm1004dcpCtrlresetCount15Port Article |
| 1.3.6.1.4.1.20044.37.6.2.35.1 | Rowpm1004dcpCtrlresetCount15PortEntry | not-accessible | current | Row definition for the pm1004dcpCtrlresetCount15Port table |
| 1.3.6.1.4.1.20044.37.6.2.35.1.1 | Columnpm1004dcpCtrlresetCount15PortIndex | read-only | current | Index definition for the pm1004dcpCtrlresetCount15Port table |
| 1.3.6.1.4.1.20044.37.6.2.35.1.2 | Columnpm1004dcpCtrlclientResetAllPerfCount15Portn | read-write | current | Client 15-min Counters Reset :This OID resets all the current 15-min Counters on the client port |
| 1.3.6.1.4.1.20044.37.6.2.36 | Tablepm1004dcpCtrlresetCount24PortTable | not-accessible | current | List of pm1004dcpCtrlresetCount24Port Article |
| 1.3.6.1.4.1.20044.37.6.2.36.1 | Rowpm1004dcpCtrlresetCount24PortEntry | not-accessible | current | Row definition for the pm1004dcpCtrlresetCount24Port table |
| 1.3.6.1.4.1.20044.37.6.2.36.1.1 | Columnpm1004dcpCtrlresetCount24PortIndex | read-only | current | Index definition for the pm1004dcpCtrlresetCount24Port table |
| 1.3.6.1.4.1.20044.37.6.2.36.1.2 | Columnpm1004dcpCtrlclientResetAllPerfCount24Portn | read-write | current | Client 24-hours Counters Reset :This OID resets all the current 24-hours Counters on the client port |
| 1.3.6.1.4.1.20044.37.6.2.128 | Tablepm1004dcpCtrladddropTsClientARxProtectTable | not-accessible | current | List of pm1004dcpCtrladddropTsClientARxProtect Article |
| 1.3.6.1.4.1.20044.37.6.2.128.1 | Rowpm1004dcpCtrladddropTsClientARxProtectEntry | not-accessible | current | Row definition for the pm1004dcpCtrladddropTsClientARxProtect table |
| 1.3.6.1.4.1.20044.37.6.2.128.1.1 | Columnpm1004dcpCtrladddropTsClientARxProtectIndex | read-only | current | Index definition for the pm1004dcpCtrladddropTsClientARxProtect table |
| 1.3.6.1.4.1.20044.37.6.2.128.1.2 | Columnpm1004dcpCtrladddropTsClientARxProtectPortn | read-write | current | Client A Switch Mode :This bit selects the manual (1) or automatic (0) switch method <Help> This control defines the protection switch mode on the client inter… |
| 1.3.6.1.4.1.20044.37.6.2.136 | Tablepm1004dcpCtrladddropTsPairModeTable | not-accessible | current | List of pm1004dcpCtrladddropTsPairMode Article |
| 1.3.6.1.4.1.20044.37.6.2.136.1 | Rowpm1004dcpCtrladddropTsPairModeEntry | not-accessible | current | Row definition for the pm1004dcpCtrladddropTsPairMode table |
| 1.3.6.1.4.1.20044.37.6.2.136.1.1 | Columnpm1004dcpCtrladddropTsPairModeIndex | read-only | current | Index definition for the pm1004dcpCtrladddropTsPairMode table |
| 1.3.6.1.4.1.20044.37.6.2.136.1.2 | Columnpm1004dcpCtrladddropTsPairModePortn | read-write | current | TS Group Mode :This OID selects the mode on the group of clients <Help> This control defines the mode (Add/Drop or Split&Select) of two consecutive Client (1/2… |
| 1.3.6.1.4.1.20044.37.6.3 | Nodepm1004dcpCtrlLine | |||
| 1.3.6.1.4.1.20044.37.6.3.64 | Nodepm1004dcpCtrlcommAccessLoop | |||
| 1.3.6.1.4.1.20044.37.6.3.64.1 | Scalarpm1004dcpCtrlCommAccessloop | read-write | deprecated | PM Full Access Loop Mode :This OID, when set, puts the module in common access loop back, looping the 10 Gb/s output signal on the 10 Gb/s input. |
| 1.3.6.1.4.1.20044.37.6.3.66 | Nodepm1004dcpCtrllineLoop | |||
| 1.3.6.1.4.1.20044.37.6.3.66.1 | Scalarpm1004dcpCtrlLineLoop | read-write | deprecated | PM Line Loop Mode :This OID, when set at '1' puts the module in line loopback mode, looping the received 10 Gb/s signal on the transmit 10 Gb/s output. The Ups… |
| 1.3.6.1.4.1.20044.37.6.3.67 | Nodepm1004dcpCtrlmsAis | |||
| 1.3.6.1.4.1.20044.37.6.3.67.1 | Scalarpm1004dcpCtrlMsAis | read-write | current | Insert MS-AIS/L-AIS On Line Output :This OID, when set, inserts an MS-AIS/L-AIS in the outgoing STM-64/OC-192 signal. |
| 1.3.6.1.4.1.20044.37.6.3.69 | Tablepm1004dcpCtrlfecDisableTable | not-accessible | current | List of pm1004dcpCtrlfecDisable Article |
| 1.3.6.1.4.1.20044.37.6.3.69.1 | Rowpm1004dcpCtrlfecDisableEntry | not-accessible | current | Row definition for the pm1004dcpCtrlfecDisable table |
| 1.3.6.1.4.1.20044.37.6.3.69.1.1 | Columnpm1004dcpCtrlfecDisableIndex | read-only | current | Index definition for the pm1004dcpCtrlfecDisable table |
| 1.3.6.1.4.1.20044.37.6.3.69.1.2 | Columnpm1004dcpCtrlfecDisablePortn | read-write | current | Forward Error Correction Inhibition :This OID, when set, inhibits the Forward Error Correction feature on the line input <Help> This control enables/disables t… |
| 1.3.6.1.4.1.20044.37.6.3.74 | Tablepm1004dcpCtrllineOosModeTable | not-accessible | current | List of pm1004dcpCtrllineOosMode Article |
| 1.3.6.1.4.1.20044.37.6.3.74.1 | Rowpm1004dcpCtrllineOosModeEntry | not-accessible | current | Row definition for the pm1004dcpCtrllineOosMode table |
| 1.3.6.1.4.1.20044.37.6.3.74.1.1 | Columnpm1004dcpCtrllineOosModeIndex | read-only | current | Index definition for the pm1004dcpCtrllineOosMode table |
| 1.3.6.1.4.1.20044.37.6.3.74.1.2 | Columnpm1004dcpCtrllineOosModePortn | read-write | current | Line Port Out Of Service :This OID sets the line port Out Of Service <Help> This control defines the service state of the line port |
| 1.3.6.1.4.1.20044.37.6.3.86 | Tablepm1004dcpCtrllineResetCount15LineTable | not-accessible | current | List of pm1004dcpCtrllineResetCount15Line Article |
| 1.3.6.1.4.1.20044.37.6.3.86.1 | Rowpm1004dcpCtrllineResetCount15LineEntry | not-accessible | current | Row definition for the pm1004dcpCtrllineResetCount15Line table |
| 1.3.6.1.4.1.20044.37.6.3.86.1.1 | Columnpm1004dcpCtrllineResetCount15LineIndex | read-only | current | Index definition for the pm1004dcpCtrllineResetCount15Line table |
| 1.3.6.1.4.1.20044.37.6.3.86.1.2 | Columnpm1004dcpCtrlresetAllPerfCount15Portn | read-write | current | Line 15-min Counters Reset :This OID resets all the current 15-min Counters on the client port |
| 1.3.6.1.4.1.20044.37.6.3.87 | Tablepm1004dcpCtrllineResetCount24LineTable | not-accessible | current | List of pm1004dcpCtrllineResetCount24Line Article |
| 1.3.6.1.4.1.20044.37.6.3.87.1 | Rowpm1004dcpCtrllineResetCount24LineEntry | not-accessible | current | Row definition for the pm1004dcpCtrllineResetCount24Line table |
| 1.3.6.1.4.1.20044.37.6.3.87.1.1 | Columnpm1004dcpCtrllineResetCount24LineIndex | read-only | current | Index definition for the pm1004dcpCtrllineResetCount24Line table |
| 1.3.6.1.4.1.20044.37.6.3.87.1.2 | Columnpm1004dcpCtrlresetAllPerfCount24Portn | read-write | current | Line 24-hours Counters Reset :This OID resets all the current 24-hours Counters on the client port |
| 1.3.6.1.4.1.20044.37.6.3.208 | Tablepm1004dcpCtrlxfpOnoffTable | not-accessible | current | List of pm1004dcpCtrlxfpOnoff Article |
| 1.3.6.1.4.1.20044.37.6.3.208.1 | Rowpm1004dcpCtrlxfpOnoffEntry | not-accessible | current | Row definition for the pm1004dcpCtrlxfpOnoff table |
| 1.3.6.1.4.1.20044.37.6.3.208.1.1 | Columnpm1004dcpCtrlxfpOnoffIndex | read-only | current | Index definition for the pm1004dcpCtrlxfpOnoff table |
| 1.3.6.1.4.1.20044.37.6.3.208.1.2 | Columnpm1004dcpCtrlxfpOnoffPortn | read-write | current | Line Optical Laser Shutdown :This OID switches off the XFP or the OTX <Help> This control defines the laser state of the line transceiver |
| 1.3.6.1.4.1.20044.37.6.3.209 | Tablepm1004dcpCtrlxfpLineLoopTable | not-accessible | current | List of pm1004dcpCtrlxfpLineLoop Article |
| 1.3.6.1.4.1.20044.37.6.3.209.1 | Rowpm1004dcpCtrlxfpLineLoopEntry | not-accessible | current | Row definition for the pm1004dcpCtrlxfpLineLoop table |
| 1.3.6.1.4.1.20044.37.6.3.209.1.1 | Columnpm1004dcpCtrlxfpLineLoopIndex | read-only | current | Index definition for the pm1004dcpCtrlxfpLineLoop table |
| 1.3.6.1.4.1.20044.37.6.3.209.1.2 | Columnpm1004dcpCtrlxfpLineLoopPortn | read-write | current | Line Facility Loopback :This OID operates a Line Facility Loopback, looping line input signal on the line output port. The loop is located on the line transcei… |
| 1.3.6.1.4.1.20044.37.6.3.210 | Tablepm1004dcpCtrlxfpXfiLoopTable | not-accessible | current | List of pm1004dcpCtrlxfpXfiLoop Article |
| 1.3.6.1.4.1.20044.37.6.3.210.1 | Rowpm1004dcpCtrlxfpXfiLoopEntry | not-accessible | current | Row definition for the pm1004dcpCtrlxfpXfiLoop table |
| 1.3.6.1.4.1.20044.37.6.3.210.1.1 | Columnpm1004dcpCtrlxfpXfiLoopIndex | read-only | current | Index definition for the pm1004dcpCtrlxfpXfiLoop table |
| 1.3.6.1.4.1.20044.37.6.3.210.1.2 | Columnpm1004dcpCtrlxfpXfiLoopPortn | read-write | current | Line Terminal Loopback :This OID operates a Line Terminal Loopback, looping line input signal on the line output port. The loop is located on all client transc… |
| 1.3.6.1.4.1.20044.37.6.3.212 | Tablepm1004dcpCtrllineTunableChannelTable | not-accessible | current | List of pm1004dcpCtrllineTunableChannel Article |
| 1.3.6.1.4.1.20044.37.6.3.212.1 | Rowpm1004dcpCtrllineTunableChannelEntry | not-accessible | current | Row definition for the pm1004dcpCtrllineTunableChannel table |
| 1.3.6.1.4.1.20044.37.6.3.212.1.1 | Columnpm1004dcpCtrllineTunableChannelIndex | read-only | current | Index definition for the pm1004dcpCtrllineTunableChannel table |
| 1.3.6.1.4.1.20044.37.6.3.212.1.2 | Columnpm1004dcpCtrllineTunableChannelPortn | read-write | current | ITU Channel :This OID selects the ITU channel of the Line OTX TLH Laser <Help> This control defines the ITU channel of the Line OTX TLH Laser |
| 1.3.6.1.4.1.20044.37.6.3.213 | Tablepm1004dcpCtrllinePhotodiodeModeTable | not-accessible | current | List of pm1004dcpCtrllinePhotodiodeMode Article |
| 1.3.6.1.4.1.20044.37.6.3.213.1 | Rowpm1004dcpCtrllinePhotodiodeModeEntry | not-accessible | current | Row definition for the pm1004dcpCtrllinePhotodiodeMode table |
| 1.3.6.1.4.1.20044.37.6.3.213.1.1 | Columnpm1004dcpCtrllinePhotodiodeModeIndex | read-only | current | Index definition for the pm1004dcpCtrllinePhotodiodeMode table |
| 1.3.6.1.4.1.20044.37.6.3.213.1.2 | Columnpm1004dcpCtrllinePhotodiodeModePortn | read-write | current | OTX TLH Rx Sens. Mode :This OID defines the Rx sensiblity mode of the Line OTX TLH <Help> This control defines the receiver sensibility mode of the Line OTX TL… |
| 1.3.6.1.4.1.20044.37.6.3.214 | Tablepm1004dcpCtrllinePhotodiodeValueTable | not-accessible | current | List of pm1004dcpCtrllinePhotodiodeValue Article |
| 1.3.6.1.4.1.20044.37.6.3.214.1 | Rowpm1004dcpCtrllinePhotodiodeValueEntry | not-accessible | current | Row definition for the pm1004dcpCtrllinePhotodiodeValue table |
| 1.3.6.1.4.1.20044.37.6.3.214.1.1 | Columnpm1004dcpCtrllinePhotodiodeValueIndex | read-only | current | Index definition for the pm1004dcpCtrllinePhotodiodeValue table |
| 1.3.6.1.4.1.20044.37.6.3.214.1.2 | Columnpm1004dcpCtrllinePhotodiodeValuePortn | read-write | current | OTX TLH Rx Sensibility :This OID sets the Rx sensibility of the Line OTX TLH (custom mode only) <Help> This control defines the receiver sensibility value (onl… |
| 1.3.6.1.4.1.20044.37.6.3.215 | Tablepm1004dcpCtrllinePowerLaserTable | not-accessible | current | List of pm1004dcpCtrllinePowerLaser Article |
| 1.3.6.1.4.1.20044.37.6.3.215.1 | Rowpm1004dcpCtrllinePowerLaserEntry | not-accessible | current | Row definition for the pm1004dcpCtrllinePowerLaser table |
| 1.3.6.1.4.1.20044.37.6.3.215.1.1 | Columnpm1004dcpCtrllinePowerLaserIndex | read-only | current | Index definition for the pm1004dcpCtrllinePowerLaser table |
| 1.3.6.1.4.1.20044.37.6.3.215.1.2 | Columnpm1004dcpCtrllinePowerLaserPortn | read-write | current | Line Laser Output Power [3-5] :This OID sets the output power value on the laser of the Line OTX TLH (Unit = dBm) <Help> This control defines the start-up outp… |
| 1.3.6.1.4.1.20044.37.7 | Nodepm1004dcpri | |||
| 1.3.6.1.4.1.20044.37.7.1 | Nodepm1004dcpriTable | |||
| 1.3.6.1.4.1.20044.37.7.1.1 | Tablepm1004dcpRinvSfpTable | not-accessible | current | List of the SFPs on the selected module |
| 1.3.6.1.4.1.20044.37.7.1.1.1 | Rowpm1004dcpRinvSfpEntry | not-accessible | current | Row definition for the SFP table |
| 1.3.6.1.4.1.20044.37.7.1.1.1.1 | Columnpm1004dcpRinvSfpIndex | read-only | current | Index for SFP table |
| 1.3.6.1.4.1.20044.37.7.1.1.1.2 | Columnpm1004dcpRinvsfp | read-only | current | Inventory for the SFP: This OID contains the inventory for the SFP |
| 1.3.6.1.4.1.20044.37.7.1.2 | Tablepm1004dcpRinvLineTable | not-accessible | current | List of the XFPs on the selected module |
| 1.3.6.1.4.1.20044.37.7.1.2.1 | Rowpm1004dcpRinvLineEntry | not-accessible | current | Row definition for the XFP table |
| 1.3.6.1.4.1.20044.37.7.1.2.1.1 | Columnpm1004dcpRinvLineIndex | read-only | current | Index for XFP table |
| 1.3.6.1.4.1.20044.37.7.1.2.1.2 | Columnpm1004dcpRinvxfpLine | read-only | current | Inventory for the XFP: This OID contains the inventory for the XFP |
| 1.3.6.1.4.1.20044.37.7.2 | Scalarpm1004dcpRinvReloadInventory | read-write | current | Reload the inventory: This OID triggers an inventory reload. |
| 1.3.6.1.4.1.20044.37.7.3 | Scalarpm1004dcpRinvHwPlatform | read-only | current | HW platform description: This OID contains the description of the Hardware platform. |
| 1.3.6.1.4.1.20044.37.7.4 | Scalarpm1004dcpRinvModulePlatform | read-only | current | Module platform description: This OID contains the description of the Module. |
| 1.3.6.1.4.1.20044.37.7.5 | Scalarpm1004dcpRinvSwPlatform | read-only | current | SW platform description: This OID contains the description of the Software platform. |
| 1.3.6.1.4.1.20044.37.7.6 | Scalarpm1004dcpRinvGwPlatform | read-only | current | GW platform desciption: This OID contains the description of the Gateware platform. |
| 1.3.6.1.4.1.20044.37.8 | Nodepm1004dcpdownload | |||
| 1.3.6.1.4.1.20044.37.8.1 | Nodepm1004dcpDwlOther | |||
| 1.3.6.1.4.1.20044.37.8.1.0 | Nodepm1004dcpDwlrestartProcess | |||
| 1.3.6.1.4.1.20044.37.8.1.0.1 | Scalarpm1004dcpDwlWarmRestartProcessed | read-only | current | Warm Restart :This OID indicates that the module last restart was a Warm RESTART |
| 1.3.6.1.4.1.20044.37.8.1.0.2 | Scalarpm1004dcpDwlColdRestartProcessed | read-only | current | Cold Restart :This OID indicates that the module last restart was a Cold RESTART |
| 1.3.6.1.4.1.20044.37.8.1.1 | Nodepm1004dcpDwlswBanksUsed | |||
| 1.3.6.1.4.1.20044.37.8.1.1.1 | Scalarpm1004dcpDwlSwBank1Used | read-only | current | SW bank 1 active :This OID indicates the module is working on SW bank 1 <Help> This status indicates if the SW bank 1 is active or standby |
| 1.3.6.1.4.1.20044.37.8.1.1.2 | Scalarpm1004dcpDwlSwBank2Used | read-only | current | SW bank 2 active :This OID indicates the module is working on SW bank 2 <Help> This status indicates if the SW bank 2 is active or standby |
| 1.3.6.1.4.1.20044.37.8.1.1.5 | Scalarpm1004dcpDwlSwBank1Notempty | read-only | current | SW bank 1 loaded :This OID indicates a software is loaded in SW bank 1 <Help> This status indicates if the SW bank 1 contains SW package |
| 1.3.6.1.4.1.20044.37.8.1.1.6 | Scalarpm1004dcpDwlSwBank2Notempty | read-only | current | SW bank 2 loaded :This OID indicates a software is loaded in SW bank 2 <Help> This status indicates if the SW bank 2 contains SW package |
| 1.3.6.1.4.1.20044.37.8.1.2 | Nodepm1004dcpDwlgwBanksUsed | |||
| 1.3.6.1.4.1.20044.37.8.1.2.1 | Scalarpm1004dcpDwlGwBank1Used | read-only | current | GW bank 1 active :This OID indicates the module is working on GW bank 1 <Help> This status indicates if the GW bank 1 is active or standby |
| 1.3.6.1.4.1.20044.37.8.1.2.2 | Scalarpm1004dcpDwlGwBank2Used | read-only | current | GW bank 2 active :This OID indicates the module is working on GW bank 2 |
| 1.3.6.1.4.1.20044.37.8.1.2.3 | Scalarpm1004dcpDwlGwBank3Used | read-only | current | GW bank 3 active :This OID indicates the module is working on GW bank 3 <Help> This status indicates if the GW bank 3 is active or standby |
| 1.3.6.1.4.1.20044.37.8.1.2.4 | Scalarpm1004dcpDwlGwBank4Used | read-only | current | GW bank 4 active :This OID indicates the module is working on GW bank 4 |
| 1.3.6.1.4.1.20044.37.8.1.2.5 | Scalarpm1004dcpDwlGwBank1Notempty | read-only | current | GW bank 1 loaded :This OID indicates a gateware is loaded in GW bank 1 <Help> This status indicates if the GW bank 1 contains GW package |
| 1.3.6.1.4.1.20044.37.8.1.2.6 | Scalarpm1004dcpDwlGwBank2Notempty | read-only | current | GW bank 2 loaded :This OID indicates a gateware is loaded in GW bank 2 |
| 1.3.6.1.4.1.20044.37.8.1.2.7 | Scalarpm1004dcpDwlGwBank3Notempty | read-only | current | GW bank 3 loaded :This OID indicates a gateware is loaded in GW bank 3 <Help> This status indicates if the GW bank 3 contains GW package |
| 1.3.6.1.4.1.20044.37.8.1.2.8 | Scalarpm1004dcpDwlGwBank4Notempty | read-only | current | GW bank 4 loaded :This OID indicates a gateware is loaded in GW bank 4 |
| 1.3.6.1.4.1.20044.37.8.2 | Nodepm1004dcpDwlClient | |||
| 1.3.6.1.4.1.20044.37.8.3 | Nodepm1004dcpDwlLine | |||
| 1.3.6.1.4.1.20044.37.9 | Nodepm1004dcpConfig | |||
| 1.3.6.1.4.1.20044.37.9.1 | Nodepm1004dcpCfgAccessCAisCsf | |||
| 1.3.6.1.4.1.20044.37.9.1.1 | Tablepm1004dcpCfgClientcaiscsfTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.37.9.1.1.1 | Rowpm1004dcpCfgClientcaiscsfEntry | not-accessible | current | Row definition for the accessCAisCsf table |
| 1.3.6.1.4.1.20044.37.9.1.1.1.1 | Columnpm1004dcpCfgClientcaiscsfIndex | read-only | current | Index definition for the clientcaiscsf table |
| 1.3.6.1.4.1.20044.37.9.1.1.1.3 | Columnpm1004dcpCfgCAisModePortn | read-write | current | CAIS mode on Client Port :This register enables/disables port laser shutdown on CAIS insertion condition |
| 1.3.6.1.4.1.20044.37.9.1.1.1.9 | Columnpm1004dcpCfgUpAccessioAlmPortn | read-write | current | CSF contributors on Client Port :This register configures the contributors to upstream CSF insertion on the port. |
| 1.3.6.1.4.1.20044.37.9.1.1.1.10 | Columnpm1004dcpCfgUpMapperDeAlmPortn | read-write | current | CSF contributors on Client Port :This register configures the contributors to upstream CSF insertion on the port. |
| 1.3.6.1.4.1.20044.37.9.1.1.1.11 | Columnpm1004dcpCfgUpAccessioSdhAlmPortn | read-write | current | CSF contributors on Client Port :This register selects the contributors of SDH register to upstream CAIS/CSF on Port |
| 1.3.6.1.4.1.20044.37.9.1.1.1.17 | Columnpm1004dcpCfgDownAccessioAlmPortn | read-write | current | CAIS contributors on Client Port :This register configures the contributors to downstream CAIS insertion on port. |
| 1.3.6.1.4.1.20044.37.9.1.1.1.18 | Columnpm1004dcpCfgDownMapperDeAlmPortn | read-write | current | CAIS contributors on Client Port :This register configures the contributors to downstream CAIS insertion on port. |
| 1.3.6.1.4.1.20044.37.9.1.1.1.19 | Columnpm1004dcpCfgDownDfrmAlmPortn | read-write | current | CAIS contributors on Client Port :This register configures the contributors to downstream CAIS insertion on port. |
| 1.3.6.1.4.1.20044.37.9.1.1.1.20 | Columnpm1004dcpCfgDownLineSyncAlarmsPortn | read-write | deprecated | CAIS contributors on Client Port :This register configures the contributors to downstream CAIS insertion on port. |
| 1.3.6.1.4.1.20044.37.9.1.1.1.21 | Columnpm1004dcpCfgDownAccessioSdhAlmPortn | read-write | current | CAIS contributors on Client Port :This register selects the contributors of SDH register to downstream CAIS/CSF on Port |
| 1.3.6.1.4.1.20044.37.9.2 | Nodepm1004dcpCfgStartup | |||
| 1.3.6.1.4.1.20044.37.9.2.1 | Tablepm1004dcpCfgClientStartupTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.37.9.2.1.1 | Rowpm1004dcpCfgClientStartupEntry | not-accessible | current | Row definition for the startup table |
| 1.3.6.1.4.1.20044.37.9.2.1.1.1 | Columnpm1004dcpCfgClientStartupIndex | read-only | current | Index definition for the clientStartup table |
| 1.3.6.1.4.1.20044.37.9.2.1.1.3 | Columnpm1004dcpCfgSystConfPortPortn | read-write | current | Default Settings on Client Port :This register configures the default initialisation settings on the port. |
| 1.3.6.1.4.1.20044.37.9.2.1.1.4 | Columnpm1004dcpCfgNetConfPortPortn | read-write | current | Default Protocol on Client Port :This register configures the default initialisation protocol on the port. |
| 1.3.6.1.4.1.20044.37.9.2.1.1.5 | Columnpm1004dcpCfgAdddropConfPortPortn | read-write | deprecated | Default Add&Drop mode on Client Port :This register configures the default Add&Drop mode on the port. |
| 1.3.6.1.4.1.20044.37.9.2.2 | Nodepm1004dcptablelineStartup | |||
| 1.3.6.1.4.1.20044.37.9.2.2.2 | Scalarpm1004dcpCfgsystConfLine1 | read-write | current | Default Settings on Line 1 :This register configures the default initialisation settings on Line port 1. |
| 1.3.6.1.4.1.20044.37.9.2.2.5 | Scalarpm1004dcpCfglineOptions1 | read-write | current | Default Options on Active Line Port :This register configures the default options on the active line port |
| 1.3.6.1.4.1.20044.37.9.2.2.6 | Scalarpm1004dcpCfgsystConfLine2 | read-write | current | Default Settings on Line 2 :This register configures the default initialisation settings on Line port 2. |
| 1.3.6.1.4.1.20044.37.9.2.2.7 | Scalarpm1004dcpCfglineSelection | read-write | current | Default Settings of active line :This register configures the start up active line. |
| 1.3.6.1.4.1.20044.37.9.2.2.9 | Scalarpm1004dcpCfglineOptions2 | read-write | deprecated | Default Options on Active Line Port :This register configures the default options on the active line port |
| 1.3.6.1.4.1.20044.37.9.2.3 | Tablepm1004dcpCfgXfpTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.37.9.2.3.1 | Rowpm1004dcpCfgXfpEntry | not-accessible | current | Row definition for the startup table |
| 1.3.6.1.4.1.20044.37.9.2.3.1.1 | Columnpm1004dcpCfgXfpIndex | read-only | current | Index definition for the xfp table |
| 1.3.6.1.4.1.20044.37.9.2.3.1.3 | Columnpm1004dcpCfgSystConfXfpPortn | read-write | current | Default settings on XFP Port :This register configures the default initialisation settings on XFP port. |
| 1.3.6.1.4.1.20044.37.9.2.3.1.4 | Columnpm1004dcpCfgDataRateConfXfpPortn | read-write | deprecated | :Reserved |
| 1.3.6.1.4.1.20044.37.9.3 | Nodepm1004dcpCfgModPerfConfig | |||
| 1.3.6.1.4.1.20044.37.9.3.1 | Nodepm1004dcptablemodPerfConfig | |||
| 1.3.6.1.4.1.20044.37.9.3.1.2 | Scalarpm1004dcpCfgperfMode | read-write | current | SONET or SDH monitoring mode :This OID defines the line monitoring mode (SONET or SDH mode) |
| 1.3.6.1.4.1.20044.37.9.4 | Nodepm1004dcpCfgJ0Client | |||
| 1.3.6.1.4.1.20044.37.9.4.1 | Tablepm1004dcpCfgEmptyTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.37.9.4.1.1 | Rowpm1004dcpCfgEmptyEntry | not-accessible | current | Row definition for the j0Client table |
| 1.3.6.1.4.1.20044.37.9.4.1.1.1 | Columnpm1004dcpCfgEmptyIndex | read-only | current | Index definition for the empty table |
| 1.3.6.1.4.1.20044.37.9.4.1.1.3 | Columnpm1004dcpCfgClientExpectJ0SetupPortn | read-write | current | Expected Trace Identifier mode :This register configures the Expected Trace Identifier Mode (single byte, 16 bytes with CRC7, 64 bytes with CRC7 or 64 bytes wi… |
| 1.3.6.1.4.1.20044.37.9.5 | Nodepm1004dcpCfgLabels | |||
| 1.3.6.1.4.1.20044.37.9.5.1 | Tablepm1004dcpCfgLabelclientTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.37.9.5.1.1 | Rowpm1004dcpCfgLabelclientEntry | not-accessible | current | Row definition for the labels table |
| 1.3.6.1.4.1.20044.37.9.5.1.1.1 | Columnpm1004dcpCfgLabelclientIndex | read-only | current | Index definition for the labelclient table |
| 1.3.6.1.4.1.20044.37.9.5.1.1.3 | Columnpm1004dcpCfgLabelclientPortn | read-write | current | Default settings on the label of the Ports :These registers configures the default initialisation settings of the labels of the ports. |
| 1.3.6.1.4.1.20044.37.9.5.2 | Tablepm1004dcpCfgLabellineTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.37.9.5.2.1 | Rowpm1004dcpCfgLabellineEntry | not-accessible | current | Row definition for the labels table |
| 1.3.6.1.4.1.20044.37.9.5.2.1.1 | Columnpm1004dcpCfgLabellineIndex | read-only | current | Index definition for the labelline table |
| 1.3.6.1.4.1.20044.37.9.5.2.1.3 | Columnpm1004dcpCfgLabellinePortn | read-write | current | Default settings on the label of the lines :These registers configures the default initialisation settings of the labels of the lines. |
| 1.3.6.1.4.1.20044.37.9.6 | Nodepm1004dcpCfgStartuptlh | |||
| 1.3.6.1.4.1.20044.37.9.6.1 | Tablepm1004dcpCfgOtxtlhTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.37.9.6.1.1 | Rowpm1004dcpCfgOtxtlhEntry | not-accessible | current | Row definition for the startuptlh table |
| 1.3.6.1.4.1.20044.37.9.6.1.1.1 | Columnpm1004dcpCfgOtxtlhIndex | read-only | current | Index definition for the otxtlh table |
| 1.3.6.1.4.1.20044.37.9.6.1.1.3 | Columnpm1004dcpCfgNuPortn | read-write | deprecated | : |
| 1.3.6.1.4.1.20044.37.9.6.1.1.4 | Columnpm1004dcpCfgLineDitherRatePortn | read-write | current | Default Line OTX TLH FM amplitude :This register configures the start-up width of the frequency modulation of the Line OTX TLH |
| 1.3.6.1.4.1.20044.37.9.6.1.1.5 | Columnpm1004dcpCfgLineDitherFhzPortn | read-write | current | Default Line OTX TLH FM frequency :This register configures the start-up frequency of the frequency modulation of the Line OTX TLH |
| 1.3.6.1.4.1.20044.37.9.6.1.1.6 | Columnpm1004dcpCfgLinePwrLaserPortn | read-write | current | Defaut Line OTX TLH output Power :This register configures the start-up output power of the Line OTX TLH (Unit = dBm) |
| 1.3.6.1.4.1.20044.37.9.6.1.1.7 | Columnpm1004dcpCfgLineFCurrentPortn | read-write | current | Default Line OTX TLH Channel :This register configures the start-up laser channel of the Line OTX TLH |
| 1.3.6.1.4.1.20044.37.9.6.1.1.8 | Columnpm1004dcpCfgLineGridCurrentPortn | read-write | current | Default Line OTX TLH Grid :This register configures the start-up laser grid of the Line OTX TLH |
| 1.3.6.1.4.1.20044.37.9.6.1.1.9 | Columnpm1004dcpCfgFPortn | read-write | current | Default Line OTX TLH lowest Freq :This register configures the start-up lowest frequency supported on the Line OTX TLH |
| 1.3.6.1.4.1.20044.37.9.6.1.1.10 | Columnpm1004dcpCfgReservedPortn | read-write | deprecated | : |
| 1.3.6.1.4.1.20044.37.9.6.1.1.11 | Columnpm1004dcpCfgLinePhotodiodeModePortn | read-write | current | Default Line OTX TLH APD mode :This register configures the start-up APD mode of the Line OTX TLH |
| 1.3.6.1.4.1.20044.37.9.6.1.1.12 | Columnpm1004dcpCfgLinePhotodiodeValuePortn | read-write | current | Default Line OTX TLH APD atten. :This register configures the start-up APD attenuation on the Line OTX TLH |
| 1.3.6.1.4.1.20044.37.9.7 | Nodepm1004dcpCfgOther | |||
| 1.3.6.1.4.1.20044.37.9.7.1 | Nodepm1004dcptablemoduleOther | |||
| 1.3.6.1.4.1.20044.37.9.7.1.2 | Scalarpm1004dcpCfgmode | read-write | current | Default settings on Module :This register selects the DCC configuration of the PM |
| 1.3.6.1.4.1.20044.37.9.7.1.3 | Scalarpm1004dcpCfgadddropTsPairMode1 | read-write | current | Default settings on TS Group Mode :This register selects selects the mode on the group of clients |
| 1.3.6.1.4.1.20044.37.9.7.1.4 | Scalarpm1004dcpCfgadddropTsPairMode2 | read-write | current | Default settings on TS Group Mode :This register selects selects the mode on the group of clients |
| 1.3.6.1.4.1.20044.37.9.7.1.5 | Scalarpm1004dcpCfgadddropTsPairMode3 | read-write | current | Default settings on TS Group Mode :This register selects selects the mode on the group of clients |
| 1.3.6.1.4.1.20044.37.9.7.1.6 | Scalarpm1004dcpCfgadddropTsPairMode4 | read-write | current | Default settings on TS Group Mode :This register selects selects the mode on the group of clients |
| 1.3.6.1.4.1.20044.37.9.8 | Nodepm1004dcpCfgStartuptablefive | |||
| 1.3.6.1.4.1.20044.37.9.8.1 | Tablepm1004dcpCfgOtxtlhcapabilitiesTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.37.9.8.1.1 | Rowpm1004dcpCfgOtxtlhcapabilitiesEntry | not-accessible | current | Row definition for the startuptablefive table |
| 1.3.6.1.4.1.20044.37.9.8.1.1.1 | Columnpm1004dcpCfgOtxtlhcapabilitiesIndex | read-only | current | Index definition for the otxtlhcapabilities table |
| 1.3.6.1.4.1.20044.37.9.8.1.1.3 | Columnpm1004dcpCfgComponentTypePortn | read-write | current | Component parameters :This OID defines the component parameters |
| 1.3.6.1.4.1.20044.37.9.8.1.1.4 | Columnpm1004dcpCfgMiscellaneousPortn | read-write | current | Miscellaneous default settings :This OID defines the miscellaneous parameters |
| 1.3.6.1.4.1.20044.37.9.8.1.1.5 | Columnpm1004dcpCfgFirstChannelPortn | read-write | current | Number of the first channel of the component :This OID defines the first channel number of the PM |
| 1.3.6.1.4.1.20044.37.9.8.1.1.6 | Columnpm1004dcpCfgLastChannelPortn | read-write | current | Number of the last channel of the component :This OID defines the last channel number of the PM |
| 1.3.6.1.4.1.20044.37.9.8.1.1.7 | Columnpm1004dcpCfgGridPortn | read-write | current | Grid value of the component :This OID defines the grid of the PM |
| 1.3.6.1.4.1.20044.37.9.257 | Scalarpm1004dcpCfgWriteConfiguration | read-write | current | Write configuration to module:This OID writes the complete configuration to the module |
| 1.3.6.1.4.1.20044.37.10 | Nodepm1004dcptraps | |||
| 1.3.6.1.4.1.20044.37.10.2 | Scalarpm1004dcptrapPortNumber | read-only | current | Last port which generates a trap |
| 1.3.6.1.4.1.20044.37.10.3 | Scalarpm1004dcptrapLineNumber | read-only | current | Last Line which generates a trap |
| 1.3.6.1.4.1.20044.37.10.4 | Scalarpm1004dcptrapBoardNumber | read-only | current | Last module which generates a trap |
| 1.3.6.1.4.1.20044.37.10.30 | Notificationpm1004dcpLineTrapNotUrgentGoesOn | current | Not urgent Line default is activated | |
| 1.3.6.1.4.1.20044.37.10.31 | Notificationpm1004dcpLineTrapNotUrgentGoesOff | current | Not urgent Line default disappeared | |
| 1.3.6.1.4.1.20044.37.10.32 | Notificationpm1004dcpLineTrapUrgentGoesOn | current | Urgent Line default is activated | |
| 1.3.6.1.4.1.20044.37.10.33 | Notificationpm1004dcpLineTrapUrgentGoesOff | current | Urgent Line default disappeared | |
| 1.3.6.1.4.1.20044.37.10.34 | Notificationpm1004dcpLineTrapCritGoesOn | current | Critical Line default is activated | |
| 1.3.6.1.4.1.20044.37.10.35 | Notificationpm1004dcpLineTrapCritGoesOff | current | Critical Line default disappeared | |
| 1.3.6.1.4.1.20044.37.10.40 | Notificationpm1004dcpClientTrapNotUrgentGoesOn | current | Not urgent client default is activated | |
| 1.3.6.1.4.1.20044.37.10.41 | Notificationpm1004dcpClientTrapNotUrgentGoesOff | current | Not urgent client default disappeared | |
| 1.3.6.1.4.1.20044.37.10.42 | Notificationpm1004dcpClientTrapUrgentGoesOn | current | Urgent client default is activated | |
| 1.3.6.1.4.1.20044.37.10.43 | Notificationpm1004dcpClientTrapUrgentGoesOff | current | Urgent client default disappeared | |
| 1.3.6.1.4.1.20044.37.10.44 | Notificationpm1004dcpClientTrapCritGoesOn | current | Critical client default is activated | |
| 1.3.6.1.4.1.20044.37.10.45 | Notificationpm1004dcpClientTrapCritGoesOff | current | Critical client default disappeared | |
| 1.3.6.1.4.1.20044.37.10.50 | Notificationpm1004dcpPowerTrapUrgentGoesOn | current | Urgent power supply default is activated | |
| 1.3.6.1.4.1.20044.37.10.51 | Notificationpm1004dcpPowerTrapUrgentGoesOff | current | Urgent power supply default disappeared | |
| 1.3.6.1.4.1.20044.37.11 | Nodepm1004dcpMonitoring | |||
| 1.3.6.1.4.1.20044.37.11.1 | Nodepm1004dcpMonOther | |||
| 1.3.6.1.4.1.20044.37.11.1.1 | Nodepm1004dcpMonSync | |||
| 1.3.6.1.4.1.20044.37.11.1.1.257 | Scalarpm1004dcpPerfEnable | read-write | current | Perf. Mon. Enable :This OID enables the Performance Monitoring application |
| 1.3.6.1.4.1.20044.37.11.1.1.258 | Scalarpm1004dcpPerfSyncSource | read-write | current | Perf. Mon. Sync. Source :This OID selects the Synchronisation source for the Performance Monitoring application (internal of external) |
| 1.3.6.1.4.1.20044.37.11.1.1.259 | Scalarpm1004dcpPerf15minSync | read-write | current | Perf. Mon. 15-min sync. :This OID must be used in external synchronisation mode only to send a 15-min synchronisation command |
| 1.3.6.1.4.1.20044.37.11.1.1.260 | Scalarpm1004dcpPerf24hSync | read-write | current | Perf. Mon. 24-hours sync. :This OID must be used in external synchronisation mode only to send a 24-hours synchronisation command |
| 1.3.6.1.4.1.20044.37.11.1.2 | Nodepm1004dcpMonTimeStamp | |||
| 1.3.6.1.4.1.20044.37.11.1.2.5 | Scalarpm1004dcpPerfCurrent15MinElapsedTime | read-write | current | Current 15min period Elapsed Time :This OID gives the number of seconds elapsed in the current 15-minutes period |
| 1.3.6.1.4.1.20044.37.11.1.2.6 | Scalarpm1004dcpPerfCurrent24HoursElapsedTime | read-write | current | Current 24hours period Elapsed Time :This OID gives the number of seconds elapsed in the current 24-hours period |
| 1.3.6.1.4.1.20044.37.11.1.2.7 | Scalarpm1004dcpPerfPast15MinElapsedTime | read-write | current | Past 15min period Elapsed Time :This OID gives the number of seconds elapsed in the past 15-minutes period |
| 1.3.6.1.4.1.20044.37.11.1.2.8 | Scalarpm1004dcpPerfPast24HoursElapsedTime | read-write | current | Past 24hours period Elapsed Time :This OID gives the number of seconds elapsed in the past 24-hours period |
| 1.3.6.1.4.1.20044.37.11.2 | Nodepm1004dcpMonClient | |||
| 1.3.6.1.4.1.20044.37.11.2.1 | Nodepm1004dcpMonClientPerformance | |||
| 1.3.6.1.4.1.20044.37.11.2.1.16 | Tablepm1004dcpPerfUpCurrent15CntTable | not-accessible | current | List of pm1004dcpPerfUpCurrent15Cnt Article |
| 1.3.6.1.4.1.20044.37.11.2.1.16.1 | Rowpm1004dcpPerfUpCurrent15CntEntry | not-accessible | current | Row definition for the pm1004dcpPerfUpCurrent15Cnt table |
| 1.3.6.1.4.1.20044.37.11.2.1.16.1.1 | Columnpm1004dcpPerfUpCurrent15CntIndex | read-only | current | Index definition for the pm1004dcpPerfUpCurrent15Cnt table |
| 1.3.6.1.4.1.20044.37.11.2.1.16.1.2 | Columnpm1004dcpPerfUpCurrent15CntInvCvPortn | read-only | current | Current 15-min CV counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.37.11.2.1.16.1.3 | Columnpm1004dcpPerfUpCurrent15CntCvValuePortn | read-only | current | Current 15-min CV counter :This OID gives the current 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.37.11.2.1.16.1.4 | Columnpm1004dcpPerfUpCurrent15CntInvEsPortn | read-only | current | Current 15-min ES counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.37.11.2.1.16.1.5 | Columnpm1004dcpPerfUpCurrent15CntEsValuePortn | read-only | current | Current 15-min ES counter :This OID gives the current 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.37.11.2.1.16.1.6 | Columnpm1004dcpPerfUpCurrent15CntInvSesPortn | read-only | current | Current 15-min SES counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.37.11.2.1.16.1.7 | Columnpm1004dcpPerfUpCurrent15CntSesValuePortn | read-only | current | Current 15-min SES counter :This OID gives the current 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.37.11.2.1.16.1.8 | Columnpm1004dcpPerfUpCurrent15CntInvSefsPortn | read-only | current | Current 15-min SEFS counter inv. :This OID indicates that the current 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.37.11.2.1.16.1.9 | Columnpm1004dcpPerfUpCurrent15CntSefsValuePortn | read-only | current | Current 15-min SEFS counter :This OID gives the current 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.37.11.2.1.16.1.10 | Columnpm1004dcpPerfUpCurrent15CntInvUasPortn | read-only | current | Current 15-min UAS counter inv. :This OID indicates that the current 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.37.11.2.1.16.1.11 | Columnpm1004dcpPerfUpCurrent15CntUasValuePortn | read-only | current | Current 15-min UAS counter :This OID gives the current 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.37.11.2.1.24 | Tablepm1004dcpPerfUpPast15CntTable | not-accessible | current | List of pm1004dcpPerfUpPast15Cnt Article |
| 1.3.6.1.4.1.20044.37.11.2.1.24.1 | Rowpm1004dcpPerfUpPast15CntEntry | not-accessible | current | Row definition for the pm1004dcpPerfUpPast15Cnt table |
| 1.3.6.1.4.1.20044.37.11.2.1.24.1.1 | Columnpm1004dcpPerfUpPast15CntIndex | read-only | current | Index definition for the pm1004dcpPerfUpPast15Cnt table |
| 1.3.6.1.4.1.20044.37.11.2.1.24.1.2 | Columnpm1004dcpPerfUpPast15CntInvCvPortn | read-only | current | Previous 15-min CV counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.37.11.2.1.24.1.3 | Columnpm1004dcpPerfUpPast15CntCvValuePortn | read-only | current | Previous 15-min CV counter :This OID gives the previous 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.37.11.2.1.24.1.4 | Columnpm1004dcpPerfUpPast15CntInvEsPortn | read-only | current | Previous 15-min ES counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.37.11.2.1.24.1.5 | Columnpm1004dcpPerfUpPast15CntEsValuePortn | read-only | current | Previous 15-min ES counter :This OID gives the previous 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.37.11.2.1.24.1.6 | Columnpm1004dcpPerfUpPast15CntInvSesPortn | read-only | current | Previous 15-min SES counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.37.11.2.1.24.1.7 | Columnpm1004dcpPerfUpPast15CntSesValuePortn | read-only | current | Previous 15-min SES counter :This OID gives the previous 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.37.11.2.1.24.1.8 | Columnpm1004dcpPerfUpPast15CntInvSefsPortn | read-only | current | Previous 15-min SEFS counter inv. :This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.37.11.2.1.24.1.9 | Columnpm1004dcpPerfUpPast15CntSefsValuePortn | read-only | current | Previous 15-min SEFS counter :This OID gives the previous 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.37.11.2.1.24.1.10 | Columnpm1004dcpPerfUpPast15CntInvUasPortn | read-only | current | Previous 15-min UAS counter inv. :This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.37.11.2.1.24.1.11 | Columnpm1004dcpPerfUpPast15CntUasValuePortn | read-only | current | Previous 15-min UAS counter :This OID gives the previous 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.37.11.2.1.32 | Tablepm1004dcpPerfUpCurrent24CntTable | not-accessible | current | List of pm1004dcpPerfUpCurrent24Cnt Article |
| 1.3.6.1.4.1.20044.37.11.2.1.32.1 | Rowpm1004dcpPerfUpCurrent24CntEntry | not-accessible | current | Row definition for the pm1004dcpPerfUpCurrent24Cnt table |
| 1.3.6.1.4.1.20044.37.11.2.1.32.1.1 | Columnpm1004dcpPerfUpCurrent24CntIndex | read-only | current | Index definition for the pm1004dcpPerfUpCurrent24Cnt table |
| 1.3.6.1.4.1.20044.37.11.2.1.32.1.2 | Columnpm1004dcpPerfUpCurrent24CntInvCvPortn | read-only | current | Current 24-hours CV counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.37.11.2.1.32.1.3 | Columnpm1004dcpPerfUpCurrent24CntCvValuePortn | read-only | current | Current 24-hours CV counter :This OID gives the current 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.37.11.2.1.32.1.4 | Columnpm1004dcpPerfUpCurrent24CntInvEsPortn | read-only | current | Current 24-hours ES counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.37.11.2.1.32.1.5 | Columnpm1004dcpPerfUpCurrent24CntEsValuePortn | read-only | current | Current 24-hours ES counter :This OID gives the current 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.37.11.2.1.32.1.6 | Columnpm1004dcpPerfUpCurrent24CntInvSesPortn | read-only | current | Current 24-hours SES counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.37.11.2.1.32.1.7 | Columnpm1004dcpPerfUpCurrent24CntSesValuePortn | read-only | current | Current 24-hours SES counter :This OID gives the current 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.37.11.2.1.32.1.8 | Columnpm1004dcpPerfUpCurrent24CntInvSefsPortn | read-only | current | Current 24-hours SEFS counter inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.37.11.2.1.32.1.9 | Columnpm1004dcpPerfUpCurrent24CntSefsValuePortn | read-only | current | Current 24-hours SEFS counter :This OID gives the current 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.37.11.2.1.32.1.10 | Columnpm1004dcpPerfUpCurrent24CntInvUasPortn | read-only | current | Current 24-hours UAS counter inv. :This OID indicates that the current 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.37.11.2.1.32.1.11 | Columnpm1004dcpPerfUpCurrent24CntUasValuePortn | read-only | current | Current 24-hours UAS counter :This OID gives the current 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.37.11.2.1.40 | Tablepm1004dcpPerfUpPast24CntTable | not-accessible | current | List of pm1004dcpPerfUpPast24Cnt Article |
| 1.3.6.1.4.1.20044.37.11.2.1.40.1 | Rowpm1004dcpPerfUpPast24CntEntry | not-accessible | current | Row definition for the pm1004dcpPerfUpPast24Cnt table |
| 1.3.6.1.4.1.20044.37.11.2.1.40.1.1 | Columnpm1004dcpPerfUpPast24CntIndex | read-only | current | Index definition for the pm1004dcpPerfUpPast24Cnt table |
| 1.3.6.1.4.1.20044.37.11.2.1.40.1.2 | Columnpm1004dcpPerfUpPast24CntInvCvPortn | read-only | current | Previous 24-hours CV counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.37.11.2.1.40.1.3 | Columnpm1004dcpPerfUpPast24CntCvValuePortn | read-only | current | Previous 24-hours CV counter :This OID gives the previous 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.37.11.2.1.40.1.4 | Columnpm1004dcpPerfUpPast24CntInvEsPortn | read-only | current | Previous 24-hours ES counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.37.11.2.1.40.1.5 | Columnpm1004dcpPerfUpPast24CntEsValuePortn | read-only | current | Previous 24-hours ES counter :This OID gives the previous 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.37.11.2.1.40.1.6 | Columnpm1004dcpPerfUpPast24CntInvSesPortn | read-only | current | Previous 24-hours SES counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.37.11.2.1.40.1.7 | Columnpm1004dcpPerfUpPast24CntSesValuePortn | read-only | current | Previous 24-hours SES counter :This OID gives the previous 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.37.11.2.1.40.1.8 | Columnpm1004dcpPerfUpPast24CntInvSefsPortn | read-only | current | Previous 24-hours SEFS counter inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.37.11.2.1.40.1.9 | Columnpm1004dcpPerfUpPast24CntSefsValuePortn | read-only | current | Previous 24-hours SEFS counter :This OID gives the previous 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.37.11.2.1.40.1.10 | Columnpm1004dcpPerfUpPast24CntInvUasPortn | read-only | current | Previous 24-hours UAS counter inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.37.11.2.1.40.1.11 | Columnpm1004dcpPerfUpPast24CntUasValuePortn | read-only | current | Previous 24-hours UAS counter :This OID gives the previous 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.37.11.2.2 | Nodepm1004dcpMonClientTraceIdentifier | |||
| 1.3.6.1.4.1.20044.37.11.2.2.2112 | Tablepm1004dcpAlmj0AlarmTable | not-accessible | current | List of pm1004dcpAlmj0Alarm Article |
| 1.3.6.1.4.1.20044.37.11.2.2.2112.1 | Rowpm1004dcpAlmj0AlarmEntry | not-accessible | current | Row definition for the pm1004dcpAlmj0Alarm table |
| 1.3.6.1.4.1.20044.37.11.2.2.2112.1.1 | Columnpm1004dcpAlmj0AlarmIndex | read-only | current | Index definition for the pm1004dcpAlmj0Alarm table |
| 1.3.6.1.4.1.20044.37.11.2.2.2112.1.2 | Columnpm1004dcpAlmJ0TimAlarmPortn | read-only | current | Trace Identifier Mismatch :This OID indicates a Trace Identifier Mismatch has been detected on the client input stream <Condtype> J0_TIM_ALARM_1 <Probcause> ot… |
| 1.3.6.1.4.1.20044.37.11.2.2.2112.1.3 | Columnpm1004dcpAlmJ0TiiAlarmPortn | read-only | current | Trace Identifier Unstable :This OID indicates the Trace Identifier is unstable on the client input stream <Condtype> J0_TII_ALARM_1 <Probcause> other (1) <Alar… |
| 1.3.6.1.4.1.20044.37.11.2.2.2112.1.4 | Columnpm1004dcpAlmCrc7ErrorPortn | read-only | current | CRC Error On Trace Identifier :This OID indicates that a CRC error has been detected in the stable Trace Identifier on the client input stream <Condtype> CRC7_… |
| 1.3.6.1.4.1.20044.37.11.3 | Nodepm1004dcpMonLine | |||
| 1.3.6.1.4.1.20044.37.11.3.1 | Nodepm1004dcpMonLinePerformance | |||
| 1.3.6.1.4.1.20044.37.11.3.1.128 | Tablepm1004dcpPerfLineCurrent15CntTable | not-accessible | current | List of pm1004dcpPerfLineCurrent15Cnt Article |
| 1.3.6.1.4.1.20044.37.11.3.1.128.1 | Rowpm1004dcpPerfLineCurrent15CntEntry | not-accessible | current | Row definition for the pm1004dcpPerfLineCurrent15Cnt table |
| 1.3.6.1.4.1.20044.37.11.3.1.128.1.1 | Columnpm1004dcpPerfLineCurrent15CntIndex | read-only | current | Index definition for the pm1004dcpPerfLineCurrent15Cnt table |
| 1.3.6.1.4.1.20044.37.11.3.1.128.1.2 | Columnpm1004dcpPerfLineCurrent15CntInvCvPortn | read-only | current | Current 15-min CV counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.37.11.3.1.128.1.3 | Columnpm1004dcpPerfLineCurrent15CntCvValuePortn | read-only | current | Current 15-min CV counter :This OID gives the current 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.37.11.3.1.128.1.4 | Columnpm1004dcpPerfLineCurrent15CntInvEsPortn | read-only | current | Current 15-min ES counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.37.11.3.1.128.1.5 | Columnpm1004dcpPerfLineCurrent15CntEsValuePortn | read-only | current | Current 15-min ES counter :This OID gives the current 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.37.11.3.1.128.1.6 | Columnpm1004dcpPerfLineCurrent15CntInvSesPortn | read-only | current | Current 15-min SES counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.37.11.3.1.128.1.7 | Columnpm1004dcpPerfLineCurrent15CntSesValuePortn | read-only | current | Current 15-min SES counter :This OID gives the current 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.37.11.3.1.128.1.8 | Columnpm1004dcpPerfLineCurrent15CntInvSefsPortn | read-only | current | Current 15-min SEFS counter inv. :This OID indicates that the current 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.37.11.3.1.128.1.9 | Columnpm1004dcpPerfLineCurrent15CntSefsValuePortn | read-only | current | Current 15-min SEFS counter :This OID gives the current 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.37.11.3.1.128.1.10 | Columnpm1004dcpPerfLineCurrent15CntInvUasPortn | read-only | current | Current 15-min UAS counter inv. :This OID indicates that the current 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.37.11.3.1.128.1.11 | Columnpm1004dcpPerfLineCurrent15CntUasValuePortn | read-only | current | Current 15-min UAS counter :This OID gives the current 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.37.11.3.1.129 | Tablepm1004dcpPerfLinePast15CntTable | not-accessible | current | List of pm1004dcpPerfLinePast15Cnt Article |
| 1.3.6.1.4.1.20044.37.11.3.1.129.1 | Rowpm1004dcpPerfLinePast15CntEntry | not-accessible | current | Row definition for the pm1004dcpPerfLinePast15Cnt table |
| 1.3.6.1.4.1.20044.37.11.3.1.129.1.1 | Columnpm1004dcpPerfLinePast15CntIndex | read-only | current | Index definition for the pm1004dcpPerfLinePast15Cnt table |
| 1.3.6.1.4.1.20044.37.11.3.1.129.1.2 | Columnpm1004dcpPerfLinePast15CntInvCvPortn | read-only | current | Previous 15-min CV counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.37.11.3.1.129.1.3 | Columnpm1004dcpPerfLinePast15CntCvValuePortn | read-only | current | Previous 15-min CV counter :This OID gives the previous 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.37.11.3.1.129.1.4 | Columnpm1004dcpPerfLinePast15CntInvEsPortn | read-only | current | Previous 15-min ES counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.37.11.3.1.129.1.5 | Columnpm1004dcpPerfLinePast15CntEsValuePortn | read-only | current | Previous 15-min ES counter :This OID gives the previous 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.37.11.3.1.129.1.6 | Columnpm1004dcpPerfLinePast15CntInvSesPortn | read-only | current | Previous 15-min SES counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.37.11.3.1.129.1.7 | Columnpm1004dcpPerfLinePast15CntSesValuePortn | read-only | current | Previous 15-min SES counter :This OID gives the previous 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.37.11.3.1.129.1.8 | Columnpm1004dcpPerfLinePast15CntInvSefsPortn | read-only | current | Previous 15-min SEFS counter inv. :This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.37.11.3.1.129.1.9 | Columnpm1004dcpPerfLinePast15CntSefsValuePortn | read-only | current | Previous 15-min SEFS counter :This OID gives the previous 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.37.11.3.1.129.1.10 | Columnpm1004dcpPerfLinePast15CntInvUasPortn | read-only | current | Previous 15-min UAS counter inv. :This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.37.11.3.1.129.1.11 | Columnpm1004dcpPerfLinePast15CntUasValuePortn | read-only | current | Previous 15-min UAS counter :This OID gives the previous 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.37.11.3.1.130 | Tablepm1004dcpPerfLineCurrent24CntTable | not-accessible | current | List of pm1004dcpPerfLineCurrent24Cnt Article |
| 1.3.6.1.4.1.20044.37.11.3.1.130.1 | Rowpm1004dcpPerfLineCurrent24CntEntry | not-accessible | current | Row definition for the pm1004dcpPerfLineCurrent24Cnt table |
| 1.3.6.1.4.1.20044.37.11.3.1.130.1.1 | Columnpm1004dcpPerfLineCurrent24CntIndex | read-only | current | Index definition for the pm1004dcpPerfLineCurrent24Cnt table |
| 1.3.6.1.4.1.20044.37.11.3.1.130.1.2 | Columnpm1004dcpPerfLineCurrent24CntInvCvPortn | read-only | current | Current 24-hours CV counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.37.11.3.1.130.1.3 | Columnpm1004dcpPerfLineCurrent24CntCvValuePortn | read-only | current | Current 24-hours CV counter :This OID gives the current 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.37.11.3.1.130.1.4 | Columnpm1004dcpPerfLineCurrent24CntInvEsPortn | read-only | current | Current 24-hours ES counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.37.11.3.1.130.1.5 | Columnpm1004dcpPerfLineCurrent24CntEsValuePortn | read-only | current | Current 24-hours ES counter :This OID gives the current 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.37.11.3.1.130.1.6 | Columnpm1004dcpPerfLineCurrent24CntInvSesPortn | read-only | current | Current 24-hours SES counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.37.11.3.1.130.1.7 | Columnpm1004dcpPerfLineCurrent24CntSesValuePortn | read-only | current | Current 24-hours SES counter :This OID gives the current 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.37.11.3.1.130.1.8 | Columnpm1004dcpPerfLineCurrent24CntInvSefsPortn | read-only | current | Current 24-hours SEFS counter inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.37.11.3.1.130.1.9 | Columnpm1004dcpPerfLineCurrent24CntSefsValuePortn | read-only | current | Current 24-hours SEFS counter :This OID gives the current 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.37.11.3.1.130.1.10 | Columnpm1004dcpPerfLineCurrent24CntInvUasPortn | read-only | current | Current 24-hours UAS counter inv. :This OID indicates that the current 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.37.11.3.1.130.1.11 | Columnpm1004dcpPerfLineCurrent24CntUasValuePortn | read-only | current | Current 24-hours UAS counter :This OID gives the current 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.37.11.3.1.131 | Tablepm1004dcpPerfLinePast24CntTable | not-accessible | current | List of pm1004dcpPerfLinePast24Cnt Article |
| 1.3.6.1.4.1.20044.37.11.3.1.131.1 | Rowpm1004dcpPerfLinePast24CntEntry | not-accessible | current | Row definition for the pm1004dcpPerfLinePast24Cnt table |
| 1.3.6.1.4.1.20044.37.11.3.1.131.1.1 | Columnpm1004dcpPerfLinePast24CntIndex | read-only | current | Index definition for the pm1004dcpPerfLinePast24Cnt table |
| 1.3.6.1.4.1.20044.37.11.3.1.131.1.2 | Columnpm1004dcpPerfLinePast24CntInvCvPortn | read-only | current | Previous 24-hours CV counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.37.11.3.1.131.1.3 | Columnpm1004dcpPerfLinePast24CntCvValuePortn | read-only | current | Previous 24-hours CV counter :This OID gives the previous 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.37.11.3.1.131.1.4 | Columnpm1004dcpPerfLinePast24CntInvEsPortn | read-only | current | Previous 24-hours ES counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.37.11.3.1.131.1.5 | Columnpm1004dcpPerfLinePast24CntEsValuePortn | read-only | current | Previous 24-hours ES counter :This OID gives the previous 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.37.11.3.1.131.1.6 | Columnpm1004dcpPerfLinePast24CntInvSesPortn | read-only | current | Previous 24-hours SES counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.37.11.3.1.131.1.7 | Columnpm1004dcpPerfLinePast24CntSesValuePortn | read-only | current | Previous 24-hours SES counter :This OID gives the previous 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.37.11.3.1.131.1.8 | Columnpm1004dcpPerfLinePast24CntInvSefsPortn | read-only | current | Previous 24-hours SEFS counter inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.37.11.3.1.131.1.9 | Columnpm1004dcpPerfLinePast24CntSefsValuePortn | read-only | current | Previous 24-hours SEFS counter :This OID gives the previous 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.37.11.3.1.131.1.10 | Columnpm1004dcpPerfLinePast24CntInvUasPortn | read-only | current | Previous 24-hours UAS counter inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.37.11.3.1.131.1.11 | Columnpm1004dcpPerfLinePast24CntUasValuePortn | read-only | current | Previous 24-hours UAS counter :This OID gives the previous 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.37.11.3.2 | Nodepm1004dcpMonLineTraceIdentifier |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Pm1004dcpAdjustValue | INTEGER { otxadjustvalue0(0), otxadjustvalue1(1), otxadjustvalue2(2), otxadjustvalue3(3), otxadjustvalue4(4), otxadjustvalue5(5), otxadjustvalue6(6), otxadjustvalue7(7), otxadjustvalue8(8), otxadjustvalue9(9), otxadjustvalue10(10) } | current | Different values in Adjust mode on OTX-TLH on line ports |
| Pm1004dcpDccMode | INTEGER { dccNo(0), dcctermLine1(1), dcctermLine2(2), dcctermLines12(3), dccmaster(4), dccslaveLine12(7) } | current | Mode for DCC |
| Pm1004dcpModeAddDrop | INTEGER { dualPassThrough(1), addDropTsA(2), addDropTsB(4), splitSelectTsA(8), splitSelectTsB(16), splitSelectTsATsB(32) } | current | different mode for client B |
| Pm1004dcpModeAddDropA | INTEGER { passThroughA(1), addDropTsA(2), splitSelectTsA(4) } | current | different mode for client A |
| Pm1004dcpModeTimeSlot | INTEGER { dualPassThrough(1), addDropTsA(2), addDropTsB(4), splitSelectTsA(8), splitSelectTsB(16), splitSelectTsATsB(32) } | current | different mode for time slot |
| Pm1004dcpOtxChannel | INTEGER | current | Channel selection on OTX-TLH on line ports |
| Pm1004dcpOtxGrid | INTEGER { otxgrid200(200), otxgrid100(100), otxgrid50(50) } | current | Different grids on OTX-TLH on line ports |
| Pm1004dcpOtxMode | INTEGER { otx80mode(1), otx60mode(2), otxadjustmode(4) } | current | Different modes on OTX-TLH on line ports |
| Pm1004dcpProtectionStartUp | INTEGER { auto(2), manualX2Line2(0), manualX1Line1(1) } | current | protection for startup |
| Pm1004dcpProtectionTimeSlot | INTEGER { auto(0), manualX1Line1(257), manualX2Line2(513) } | current | protection for control |