EKINOPS-Pm1004m-MIB
705 objects
Creation
Imported Objects
| EKINOPS-MIB | EkiApiState EkiMeasureType EkiMode ekinops EkiOnOff EkiProtocol EkiState EkiSynchroMode |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.20044.29 | IdentitymodulePm1004m | Creation | ||
| 1.3.6.1.4.1.20044.29.2 | Nodepm1004malarms | |||
| 1.3.6.1.4.1.20044.29.2.1 | Nodepm1004mAlmOther | |||
| 1.3.6.1.4.1.20044.29.2.1.1 | Nodepm1004mAlmOtherNurg | |||
| 1.3.6.1.4.1.20044.29.2.1.1.2 | Nodepm1004mAlmsynthAlm2 | |||
| 1.3.6.1.4.1.20044.29.2.1.1.2.1 | Scalarpm1004mAlmConfTableSave | read-only | current | PM Configuration Save :This OID is at 1 during the saving of a new configuration table in the module Flash memory. <Condtype> CONF_TABLE_SAVE <Probcause> other… |
| 1.3.6.1.4.1.20044.29.2.1.1.2.2 | Scalarpm1004mAlmInvUpload | read-only | current | Inventory Upload :This OID is at 1 during the uploading of PM inventory information. <Condtype> INV_UPLOAD <Probcause> other (1) <Alarmtype> other (1) <Polarit… |
| 1.3.6.1.4.1.20044.29.2.1.1.2.3 | Scalarpm1004mAlmConfTableLoad | read-only | current | PM Configuration Load :This OID is at 1 during the loading of configuration tables in the modules RAM. <Condtype> CONF_TABLE_LOAD <Probcause> other (1) <Alarmt… |
| 1.3.6.1.4.1.20044.29.2.1.1.2.4 | Scalarpm1004mAlmCorrelatOff | read-only | current | Not Used :This OID, when set, indicates that alarm correlation is not being performed. <Condtype> CORRELAT_OFF <Probcause> other (1) <Alarmtype> other (1) <Pol… |
| 1.3.6.1.4.1.20044.29.2.1.1.2.5 | Scalarpm1004mAlmMaintenanceOn | read-only | current | Maintenance Mode :This OID indicates that the PM is in maintenance mode. <Help> This alarm indicates that the maintenance mode is enabled on the PM <Condtype> … |
| 1.3.6.1.4.1.20044.29.2.1.2 | Nodepm1004mAlmOtherUrg | |||
| 1.3.6.1.4.1.20044.29.2.1.2.194 | Nodepm1004mAlmmodInitFailLevel2 | |||
| 1.3.6.1.4.1.20044.29.2.1.2.194.1 | Scalarpm1004mAlmLedFail | read-only | current | Led Fail :This OID indicates that Led register has not been correctly initalized <Help> This alarm indicates if the module LEDs are correctly initialized <Cond… |
| 1.3.6.1.4.1.20044.29.2.1.2.194.2 | Scalarpm1004mAlmNextColdBootForced | read-only | current | Next Cold Boot Forced :This OID indicates that the next Reset will be forced Cold <Help> This alarm indicates that the next reset of the module will be forced … |
| 1.3.6.1.4.1.20044.29.2.1.2.194.3 | Scalarpm1004mAlmBootUndone | read-only | current | Boot Undone :This OID indicates that the boot has not been correctly achieved <Help> This alarm indicates if the module has correctly boot <Condtype> BOOT_UNDO… |
| 1.3.6.1.4.1.20044.29.2.1.2.194.4 | Scalarpm1004mAlmResetHwInitFail | read-only | current | Reset HW Init Fail :This OID indicates that the HW intialization has caused unknown intial conditions <Help> This alarm indicates if the HW has been correctly … |
| 1.3.6.1.4.1.20044.29.2.1.2.194.5 | Scalarpm1004mAlmSwInitFail | read-only | current | SW Init Fail :This OID indicates that the SW intialization has caused unknown intial conditions <Help> This alarm indicates if the SW module is correctly initi… |
| 1.3.6.1.4.1.20044.29.2.1.2.195 | Nodepm1004mAlmmodInitFailLevel3 | |||
| 1.3.6.1.4.1.20044.29.2.1.2.195.1 | Scalarpm1004mAlmGwIdentFail | read-only | current | GW Ident Fail :This OID indicates that GW identification has not been read <Help> This alarm indicates if the GW has been correctly identified <Condtype> GW_ID… |
| 1.3.6.1.4.1.20044.29.2.1.2.195.2 | Scalarpm1004mAlmObmTypeReadFail | read-only | current | OBM Type Read Fail :This OID indicates that OBM type has not been recognized <Help> This alarm indicates if the OBM board has been correctly identified <Condty… |
| 1.3.6.1.4.1.20044.29.2.1.2.195.3 | Scalarpm1004mAlmInitModuleFail | read-only | current | Init Module Fail :This OID indicates that the Module has not been correctly initialized <Help> This alarm indicates if the SW module is correctly initialized <… |
| 1.3.6.1.4.1.20044.29.2.1.2.195.5 | Scalarpm1004mAlmXfp1InitFail | read-only | current | XFP1 Init Fail :This OID indicates that the XFP has not been correctly initialized <Help> This alarm indicates if the line transceiver 1 is correctly initializ… |
| 1.3.6.1.4.1.20044.29.2.1.2.195.6 | Scalarpm1004mAlmXfp2InitFail | read-only | current | XFP2 Init Fail :This OID indicates that the XFP has not been correctly initialized <Help> This alarm indicates if the line transceiver 2 is correctly initializ… |
| 1.3.6.1.4.1.20044.29.2.1.2.195.7 | Scalarpm1004mAlmLine1InitFail | read-only | current | Line1 Init Fail :This OID indicates that the Line registersvsubset has not been correctly initialized <Help> This alarm indicates if the line port 1 is correct… |
| 1.3.6.1.4.1.20044.29.2.1.2.195.8 | Scalarpm1004mAlmLine2InitFail | read-only | current | Line2 Init Fail :This OID indicates that the Line register subset has not been correctly initialized <Help> This alarm indicates if the line port 2 is correctl… |
| 1.3.6.1.4.1.20044.29.2.1.2.195.9 | Scalarpm1004mAlmClient1InitFail | read-only | current | Client1 Init Fail :This OID indicates that Client 1 registers subset has not been correctly initialized <Help> This alarm indicates if the client port 1 is cor… |
| 1.3.6.1.4.1.20044.29.2.1.2.195.10 | Scalarpm1004mAlmClient2InitFail | read-only | current | Client2 Init Fail :This OID indicates that Client 2 registers subset has not been correctly initialized <Help> This alarm indicates if the client port 2 is cor… |
| 1.3.6.1.4.1.20044.29.2.1.2.195.11 | Scalarpm1004mAlmClient3InitFail | read-only | current | Client3 Init Fail :This OID indicates that Client 3 registers subset has not been correctly initialized <Help> This alarm indicates if the client port 3 is cor… |
| 1.3.6.1.4.1.20044.29.2.1.2.195.12 | Scalarpm1004mAlmClient4InitFail | read-only | current | Client4 Init Fail :This OID indicates that Client 4 registers subset has not been correctly initialized <Help> This alarm indicates if the client port 4 is cor… |
| 1.3.6.1.4.1.20044.29.2.1.3 | Nodepm1004mAlmOtherCrit | |||
| 1.3.6.1.4.1.20044.29.2.1.3.0 | Nodepm1004mAlmsynthAlm0 | |||
| 1.3.6.1.4.1.20044.29.2.1.3.0.9 | Scalarpm1004mAlmModGlobFail | read-only | current | Module Failure :This OID is set on detection of a failure originating from the PM <Condtype> MOD_GLOB_FAIL <Probcause> equipmentMalfunction (16) <Alarmtype> sy… |
| 1.3.6.1.4.1.20044.29.2.1.3.0.15 | Scalarpm1004mAlmDefFuseA | read-only | current | Fuse A Fail :This OID indicates that the fuse of the power input A is in fail condition <Help> Status of the Fuse A <Condtype> DEF_FUSE_A <Probcause> powerProb… |
| 1.3.6.1.4.1.20044.29.2.1.3.0.16 | Scalarpm1004mAlmDefFuseB | read-only | current | Fuse B Fail :This OID indicates that the fuse of the power input B is in fail condition <Help> Status of the Fuse B <Condtype> DEF_FUSE_B <Probcause> powerProb… |
| 1.3.6.1.4.1.20044.29.2.2 | Nodepm1004mAlmClient | |||
| 1.3.6.1.4.1.20044.29.2.2.1 | Nodepm1004mAlmClientNurg | |||
| 1.3.6.1.4.1.20044.29.2.2.1.48 | Tablepm1004mAlmsfpWarnDdmTable | not-accessible | current | List of pm1004mAlmsfpWarnDdm Article |
| 1.3.6.1.4.1.20044.29.2.2.1.48.1 | Rowpm1004mAlmsfpWarnDdmEntry | not-accessible | current | Row definition for the pm1004mAlmsfpWarnDdm table |
| 1.3.6.1.4.1.20044.29.2.2.1.48.1.1 | Columnpm1004mAlmsfpWarnDdmIndex | read-only | current | Index definition for the pm1004mAlmsfpWarnDdm table |
| 1.3.6.1.4.1.20044.29.2.2.1.48.1.2 | Columnpm1004mAlmTxPwLowWngPortn | read-only | current | Client SFP Tx Power Low Warning :Warning indicating that the SFP output power of port is lower than the threshold value written in the SFP EEPROM <Condtype> TX… |
| 1.3.6.1.4.1.20044.29.2.2.1.48.1.3 | Columnpm1004mAlmTxPwrHighWngPortn | read-only | current | Client SFP Tx Power High Warning :Warning indicating that the SFP output power of port is higher than the threshold value written in the SFP EEPROM <Condtype> … |
| 1.3.6.1.4.1.20044.29.2.2.1.48.1.4 | Columnpm1004mAlmTxBiasLowWngPortn | read-only | current | Client SFP Bias Low Warning :Warning indicating that the SFP laser bias current of port is lower than the threshold value written in the SFP EEPROM <Condtype> … |
| 1.3.6.1.4.1.20044.29.2.2.1.48.1.5 | Columnpm1004mAlmTxBiasHighWngPortn | read-only | current | Client SFP Bias High Warning :Warning indicating that the SFP laser bias current of port is higher than the threshold value written in the SFP EEPROM <Condtype… |
| 1.3.6.1.4.1.20044.29.2.2.1.48.1.6 | Columnpm1004mAlmVccLowWngPortn | read-only | current | Client SFP Power Supply Low Warning :Warning indicating that the SFP power supply of port is lower than the threshold value written in the SFP EEPROM <Condtype… |
| 1.3.6.1.4.1.20044.29.2.2.1.48.1.7 | Columnpm1004mAlmVccHighWngPortn | read-only | current | Client SFP Power Supply High Warning :Warning indicating that the SFP power supply of port is higher than the threshold value written in the SFP EEPROM <Condty… |
| 1.3.6.1.4.1.20044.29.2.2.1.48.1.8 | Columnpm1004mAlmTempLowWngPortn | read-only | current | Client SFP Temp Low Warning :Warning indicating that the SFP temperature of port is lower than the threshold value written in the SFP EEPROM <Condtype> TEMP_LO… |
| 1.3.6.1.4.1.20044.29.2.2.1.48.1.9 | Columnpm1004mAlmTempHighWngPortn | read-only | current | Client SFP Temp High Warning :Warning indicating that the SFP temperature of port is higher than the threshold value written in the SFP EEPROM <Condtype> TEMP_… |
| 1.3.6.1.4.1.20044.29.2.2.1.48.1.16 | Columnpm1004mAlmRxPwrLowWngPortn | read-only | current | Client SFP Rx Power Low Warning :Warning indicating that the SFP input power of port is lower than the threshold value written in the SFP EEPROM <Condtype> RX_… |
| 1.3.6.1.4.1.20044.29.2.2.1.48.1.17 | Columnpm1004mAlmRxPwrHighWngPortn | read-only | current | Client SFP Rx Power High Warning :Warning indicating that the SFP input power of port is higher than the threshold value written in the SFP EEPROM <Condtype> R… |
| 1.3.6.1.4.1.20044.29.2.2.1.96 | Tablepm1004mAlmk1K2ClientTable | not-accessible | current | List of pm1004mAlmk1K2Client Article |
| 1.3.6.1.4.1.20044.29.2.2.1.96.1 | Rowpm1004mAlmk1K2ClientEntry | not-accessible | current | Row definition for the pm1004mAlmk1K2Client table |
| 1.3.6.1.4.1.20044.29.2.2.1.96.1.1 | Columnpm1004mAlmk1K2ClientIndex | read-only | current | Index definition for the pm1004mAlmk1K2Client table |
| 1.3.6.1.4.1.20044.29.2.2.1.96.1.2 | Columnpm1004mAlmk1K2ClientPortn | read-only | current | Client K1-K2 Extracted Value :This OID gives the value of K1 (LSB) and K2 (MSB) extracted from the overhead of the received OC-48c/STM-16c signal <Condtype> CL… |
| 1.3.6.1.4.1.20044.29.2.2.2 | Nodepm1004mAlmClientUrg | |||
| 1.3.6.1.4.1.20044.29.2.2.2.32 | Tablepm1004mAlmsfpAlmDdmTable | not-accessible | current | List of pm1004mAlmsfpAlmDdm Article |
| 1.3.6.1.4.1.20044.29.2.2.2.32.1 | Rowpm1004mAlmsfpAlmDdmEntry | not-accessible | current | Row definition for the pm1004mAlmsfpAlmDdm table |
| 1.3.6.1.4.1.20044.29.2.2.2.32.1.1 | Columnpm1004mAlmsfpAlmDdmIndex | read-only | current | Index definition for the pm1004mAlmsfpAlmDdm table |
| 1.3.6.1.4.1.20044.29.2.2.2.32.1.2 | Columnpm1004mAlmTxPwrLowAlaPortn | read-only | current | Client SFP Tx Power Low :Alarm indicating that the SFP output power of port is lower than the threshold value written in the SFP EEPROM <Condtype> TX_PWR_LOW_A… |
| 1.3.6.1.4.1.20044.29.2.2.2.32.1.3 | Columnpm1004mAlmTxPwrHighAlaPortn | read-only | current | Client SFP Tx Power High :Alarm indicating that the SFP output power of port is higher than the threshold value written in the SFP EEPROM <Condtype> TX_PWR_HIG… |
| 1.3.6.1.4.1.20044.29.2.2.2.32.1.4 | Columnpm1004mAlmTxBiasLowAlaPortn | read-only | current | Client SFP Bias Low :Alarm indicating that the SFP laser bias current of port is lower than the threshold value written in the SFP EEPROM <Condtype> TX_BIAS_LO… |
| 1.3.6.1.4.1.20044.29.2.2.2.32.1.5 | Columnpm1004mAlmTxBiasHighAlaPortn | read-only | current | Client SFP Bias High :Alarm indicating that the SFP laser bias current of port is higher than the threshold value written in the SFP EEPROM <Condtype> TX_BIAS_… |
| 1.3.6.1.4.1.20044.29.2.2.2.32.1.6 | Columnpm1004mAlmVccLowAlaPortn | read-only | current | Client SFP Power Supply Low :Alarm indicating that the SFP power supply of port is lower than the threshold value written in the SFP EEPROM <Condtype> VCC_LOW_… |
| 1.3.6.1.4.1.20044.29.2.2.2.32.1.7 | Columnpm1004mAlmVccHighAlaPortn | read-only | current | Client SFP Power Supply High :Alarm indicating that the SFP power supply of port is higher than the threshold value written in the SFP EEPROM <Condtype> VCC_HI… |
| 1.3.6.1.4.1.20044.29.2.2.2.32.1.8 | Columnpm1004mAlmTempLowAlaPortn | read-only | current | Client SFP Temp Low :Alarm indicating that the SFP temperature of port is lower than the threshold value written in the SFP EEPROM <Condtype> TEMP_LOW_ALA_1 <P… |
| 1.3.6.1.4.1.20044.29.2.2.2.32.1.9 | Columnpm1004mAlmTempHighAlaPortn | read-only | current | Client SFP Temp High :Alarm indicating that the SFP temperature of port is higher than the threshold value written in the SFP EEPROM <Condtype> TEMP_HIGH_ALA_1… |
| 1.3.6.1.4.1.20044.29.2.2.2.32.1.16 | Columnpm1004mAlmRxPwrLowAlaPortn | read-only | current | Client SFP Rx Power Low :Alarm indicating that the SFP input power of port is lower than the threshold value written in the SFP EEPROM <Condtype> RX_PWR_LOW_AL… |
| 1.3.6.1.4.1.20044.29.2.2.2.32.1.17 | Columnpm1004mAlmRxPwrHighAlaPortn | read-only | current | Client SFP Rx Power High :Alarm indicating that the SFP input power of port is higher than the threshold value written in the SFP EEPROM <Condtype> RX_PWR_HIGH… |
| 1.3.6.1.4.1.20044.29.2.2.3 | Nodepm1004mAlmClientCrit | |||
| 1.3.6.1.4.1.20044.29.2.2.3.8 | Tablepm1004mAlmsynthAlmPortTable | not-accessible | current | List of pm1004mAlmsynthAlmPort Article |
| 1.3.6.1.4.1.20044.29.2.2.3.8.1 | Rowpm1004mAlmsynthAlmPortEntry | not-accessible | current | Row definition for the pm1004mAlmsynthAlmPort table |
| 1.3.6.1.4.1.20044.29.2.2.3.8.1.1 | Columnpm1004mAlmsynthAlmPortIndex | read-only | current | Index definition for the pm1004mAlmsynthAlmPort table |
| 1.3.6.1.4.1.20044.29.2.2.3.8.1.2 | Columnpm1004mAlmSfpAbsentPortn | read-only | current | Client SFP Absent :This OID indicates that the SFP module is not present in the client port. <Help> This alarm indicates if the client transceiver is present. … |
| 1.3.6.1.4.1.20044.29.2.2.3.8.1.3 | Columnpm1004mAlmDdmAbsentPortn | read-only | current | DDM Supported On Client SFP :This OID indicates that the Client SFP module supports the Digital Diagnostic Monitoring function <Help> This status indicates if … |
| 1.3.6.1.4.1.20044.29.2.2.3.8.1.5 | Columnpm1004mAlmHwFailAccPortn | read-only | current | Client HW Fail :This OID indicates a failure on client port, most probably caused by a HW issue. <Condtype> HW_FAIL_ACC_1 <Probcause> equipmentMalfunction (16)… |
| 1.3.6.1.4.1.20044.29.2.2.3.8.1.6 | Columnpm1004mAlmDwLsdPortn | read-only | current | Client SFP Laser Shutdown :This OID indicates the Client SFP transmitter output is ON. <Help> This status indicates if the client transceiver laser is ON or OF… |
| 1.3.6.1.4.1.20044.29.2.2.3.8.1.7 | Columnpm1004mAlmClientLocalOosPortn | read-only | current | Local Client Port In Service :This OID indicates that the local Client port is In Service (1) or Out of Service (2) <Help> This status indicates if the local c… |
| 1.3.6.1.4.1.20044.29.2.2.3.8.1.8 | Columnpm1004mAlmClientRemoteOosPortn | read-only | current | Remote Client Port In Service :This OID indicates that the remote Client port is In Service (1) or Out of Service (2) <Help> This status indicates if the remot… |
| 1.3.6.1.4.1.20044.29.2.2.3.8.1.9 | Columnpm1004mAlmDwCaisPortn | read-only | current | Client AIS Inserted :This OID indicates a CAIS has been inserted on the output client port. <Help> This status indicates if a Client Alarm Indication Signal is… |
| 1.3.6.1.4.1.20044.29.2.2.3.8.1.10 | Columnpm1004mAlmSfpDdmWarningPortn | read-only | current | Warning On Client SFP DDM :This OID indicates a warning is being received from the Client SFP DDM <Help> This alarm indicates if a DDM Warning has been detecte… |
| 1.3.6.1.4.1.20044.29.2.2.3.8.1.11 | Columnpm1004mAlmSfpDdmAlmPortn | read-only | current | Alarm On Client SFP DDM :This OID indicates an alarm is being received from the Client SFP DDM <Help> This alarm indicates if a DDM Alarm has been detected on … |
| 1.3.6.1.4.1.20044.29.2.2.3.8.1.13 | Columnpm1004mAlmFailAccPortn | read-only | current | Client Access Fail :This OID indicates a failure on the Client port <Condtype> FAIL_ACC_1 <Probcause> equipmentMalfunction (16) <Alarmtype> synthesisAlarm (12)… |
| 1.3.6.1.4.1.20044.29.2.2.3.8.1.17 | Columnpm1004mAlmUpCsfPortn | read-only | current | Client Signal Fail Inserted :This OID indicates a CSF has been inserted in the upstream client port. <Help> This status indicates if a Client Signal Fail is cu… |
| 1.3.6.1.4.1.20044.29.2.2.3.16 | Tablepm1004mAlmaccessioAlmTable | not-accessible | current | List of pm1004mAlmaccessioAlm Article |
| 1.3.6.1.4.1.20044.29.2.2.3.16.1 | Rowpm1004mAlmaccessioAlmEntry | not-accessible | current | Row definition for the pm1004mAlmaccessioAlm table |
| 1.3.6.1.4.1.20044.29.2.2.3.16.1.1 | Columnpm1004mAlmaccessioAlmIndex | read-only | current | Index definition for the pm1004mAlmaccessioAlm table |
| 1.3.6.1.4.1.20044.29.2.2.3.16.1.2 | Columnpm1004mAlmDwLasFailPortn | read-only | current | Client SFP Tx Failed :This OID indicates that the transmitter fails for the SFP plugged into the client port (this alarm reports the transmitter failure alarm … |
| 1.3.6.1.4.1.20044.29.2.2.3.16.1.5 | Columnpm1004mAlmUpLosPortn | read-only | current | Client Input Loss Of Signal :This OID indicates that no signal is present on the SFP of the client port <Help> This alarm indicates if an optical signal is det… |
| 1.3.6.1.4.1.20044.29.2.2.3.72 | Tablepm1004mAlmmapperDeAlmTable | not-accessible | current | List of pm1004mAlmmapperDeAlm Article |
| 1.3.6.1.4.1.20044.29.2.2.3.72.1 | Rowpm1004mAlmmapperDeAlmEntry | not-accessible | current | Row definition for the pm1004mAlmmapperDeAlm table |
| 1.3.6.1.4.1.20044.29.2.2.3.72.1.1 | Columnpm1004mAlmmapperDeAlmIndex | read-only | current | Index definition for the pm1004mAlmmapperDeAlm table |
| 1.3.6.1.4.1.20044.29.2.2.3.72.1.2 | Columnpm1004mAlmUpAccOosPortn | read-only | current | Client Loss Of Frame :This OID indicates the upstream client input port is in Loss of Frame condition <Help> This alarm indicates if there is a Loss of Frame i… |
| 1.3.6.1.4.1.20044.29.2.2.3.72.1.11 | Columnpm1004mAlmUpBufferOvlPortn | read-only | current | Client Upstream Buffer Overload :This OID indicates that the rate adaptation buffer for client port is in overload. <Help> This alarm indicates if there is a u… |
| 1.3.6.1.4.1.20044.29.2.2.3.72.1.12 | Columnpm1004mAlmDwCsfDetPortn | read-only | current | Client Signal Fail Detected :This OID indicates that a CSF has been detected on client port in the downstream direction <Help> This alarm indicates if a Client… |
| 1.3.6.1.4.1.20044.29.2.2.3.72.1.15 | Columnpm1004mAlmDwBufferOvlPortn | read-only | current | Client Downstream Buffer Overload :This OID indicates that the de-mapper buffer for client port is in overload. <Help> This alarm indicates if there is a downs… |
| 1.3.6.1.4.1.20044.29.2.2.3.104 | Tablepm1004mAlmaccessioSdhAlarmTable | not-accessible | current | List of pm1004mAlmaccessioSdhAlarm Article |
| 1.3.6.1.4.1.20044.29.2.2.3.104.1 | Rowpm1004mAlmaccessioSdhAlarmEntry | not-accessible | current | Row definition for the pm1004mAlmaccessioSdhAlarm table |
| 1.3.6.1.4.1.20044.29.2.2.3.104.1.1 | Columnpm1004mAlmaccessioSdhAlarmIndex | read-only | current | Index definition for the pm1004mAlmaccessioSdhAlarm table |
| 1.3.6.1.4.1.20044.29.2.2.3.104.1.3 | Columnpm1004mAlmFifoErrPortn | read-only | current | Client Transceiver Fifo Error :This OID indicates that an error has been detected in the FIFO of the client transceiver <Condtype> FIFO_ERR_1 <Probcause> trans… |
| 1.3.6.1.4.1.20044.29.2.2.3.104.1.4 | Columnpm1004mAlmRxLossOfLockPortn | read-only | current | Client Rx Clock Lock Error :This OID indicates the recovered receive clock of the client transceiver is not locked <Condtype> RX_LOSS_OF_LOCK_1 <Probcause> rec… |
| 1.3.6.1.4.1.20044.29.2.2.3.104.1.5 | Columnpm1004mAlmTxLossOfLockPortn | read-only | current | Client Tx Clock Lock Error :This OID indicates that the transmit clock of the client transceiver is not locke <Condtype> TX_LOSS_OF_LOCK_1 <Probcause> transmit… |
| 1.3.6.1.4.1.20044.29.2.2.3.104.1.6 | Columnpm1004mAlmClientAisDetPortn | read-only | current | Client MS-AIS :This OID indicates that a MS-AIS has been detected on the client input stream <Help> This alarm indicates if there is a MS-AIS/L-AIS is detected… |
| 1.3.6.1.4.1.20044.29.2.2.3.104.1.7 | Columnpm1004mAlmClientRdiDetPortn | read-only | current | Client MS-RDI :This OID indicates that a MS-RDI has been detected on the client input stream <Help> This alarm indicates if there is a MS-RDI/L-RDI is detected… |
| 1.3.6.1.4.1.20044.29.2.2.3.104.1.8 | Columnpm1004mAlmClientOofPortn | read-only | current | Client Out Of Frame :This OID indicates that an Out Of Frame condition has been detected on the OC-48/STM-16 client input stream <Help> This alarm indicates if… |
| 1.3.6.1.4.1.20044.29.2.3 | Nodepm1004mAlmLine | |||
| 1.3.6.1.4.1.20044.29.2.3.1 | Nodepm1004mAlmLineNurg | |||
| 1.3.6.1.4.1.20044.29.2.3.1.209 | Tablepm1004mAlmlineXfp1WarningsTable | not-accessible | current | List of pm1004mAlmlineXfp1Warnings Article |
| 1.3.6.1.4.1.20044.29.2.3.1.209.1 | Rowpm1004mAlmlineXfp1WarningsEntry | not-accessible | current | Row definition for the pm1004mAlmlineXfp1Warnings table |
| 1.3.6.1.4.1.20044.29.2.3.1.209.1.1 | Columnpm1004mAlmlineXfp1WarningsIndex | read-only | current | Index definition for the pm1004mAlmlineXfp1Warnings table |
| 1.3.6.1.4.1.20044.29.2.3.1.209.1.2 | Columnpm1004mAlmTxPowerLowWarningPortn | read-only | current | Line Optical Tx Power Low Warning :Warning indicating that the XFP/OTX transmitter transmitter output power is lower than the threshold value written in the XF… |
| 1.3.6.1.4.1.20044.29.2.3.1.209.1.3 | Columnpm1004mAlmTxPowerHighWarningPortn | read-only | current | Line Optical Tx Power High Warning :Warning indicating that the XFP/OTX transmitter transmitter output power is higher than the threshold value written in the … |
| 1.3.6.1.4.1.20044.29.2.3.1.209.1.4 | Columnpm1004mAlmTxBiasLowWarningPortn | read-only | current | Line Transceiver Bias Low Warning :Warning indicating that the XFP/OTX transmitter laser bias current is lower than the threshold value written in the XFP/OTX … |
| 1.3.6.1.4.1.20044.29.2.3.1.209.1.5 | Columnpm1004mAlmTxBiasHighWarningPortn | read-only | current | Line Transceiver Bias High Warning :Warning indicating that the XFP/OTX transmitter laser bias current is higher than the threshold value written in the XFP EE… |
| 1.3.6.1.4.1.20044.29.2.3.1.209.1.8 | Columnpm1004mAlmTempLowWarningPortn | read-only | current | Line Transceiver Temp Low Warning :Warning indicating that the XFP/OTX temperature is lower than the threshold value written in the XFP/OTX EEPROM <Condtype> T… |
| 1.3.6.1.4.1.20044.29.2.3.1.209.1.9 | Columnpm1004mAlmTempHighWarningPortn | read-only | current | Line Transceiver Temp High Warning :Warning indicating that the XFP/OTX temperature is higher than the threshold value written in the XFP EEPROM <Condtype> TEM… |
| 1.3.6.1.4.1.20044.29.2.3.1.209.1.16 | Columnpm1004mAlmRxPowerLowWarningPortn | read-only | current | Line Optical Rx Power Low Warning :Warning indicating that the XFP received optical power is lower than the threshold value written in the XFP EEPROM <Condtype… |
| 1.3.6.1.4.1.20044.29.2.3.1.209.1.17 | Columnpm1004mAlmRxPowerHighWarningPortn | read-only | current | Line Optical Rx Power High Warning :Warning indicating that the XFP received optical power is higher than the threshold value written in the XFP EEPROM <Condty… |
| 1.3.6.1.4.1.20044.29.2.3.1.225 | Tablepm1004mAlmlineOtx1TlhWarningsTable | not-accessible | current | List of pm1004mAlmlineOtx1TlhWarnings Article |
| 1.3.6.1.4.1.20044.29.2.3.1.225.1 | Rowpm1004mAlmlineOtx1TlhWarningsEntry | not-accessible | current | Row definition for the pm1004mAlmlineOtx1TlhWarnings table |
| 1.3.6.1.4.1.20044.29.2.3.1.225.1.1 | Columnpm1004mAlmlineOtx1TlhWarningsIndex | read-only | current | Index definition for the pm1004mAlmlineOtx1TlhWarnings table |
| 1.3.6.1.4.1.20044.29.2.3.1.225.1.6 | Columnpm1004mAlmLineModulatorAgingHighWarningPortn | read-only | current | Line Modulator Aging High Warning :Warning indicating the Line OTX TLH modulator aging is higher than the threshold written in the EEPROM <Condtype> LINE_MODUL… |
| 1.3.6.1.4.1.20044.29.2.3.1.225.1.7 | Columnpm1004mAlmLineAgingHighWarningPortn | read-only | current | Line OTX TLH Aging High Warning :Warning indicating the Line OTX TLH aging is higher than the threshold written in the EEPROM <Condtype> LINE_AGING_HIGH_WARNIN… |
| 1.3.6.1.4.1.20044.29.2.3.1.225.1.13 | Columnpm1004mAlmLineFreqDevHighWarningPortn | read-only | current | Line Freq. Deviation High Warning :Warning indicating the Line OTX TLH frequency deviation is higher than the threshold written in the EEPROM <Condtype> LINE_F… |
| 1.3.6.1.4.1.20044.29.2.3.1.225.1.15 | Columnpm1004mAlmLineLaserTempHighWarningPortn | read-only | current | Line Laser Temp. High Warning :Warning indicating the Line OTX TLH laser temperature is higher than the threshold written in the EEPROM <Condtype> LINE_LASER_T… |
| 1.3.6.1.4.1.20044.29.2.3.2 | Nodepm1004mAlmLineUrg | |||
| 1.3.6.1.4.1.20044.29.2.3.2.129 | Tablepm1004mAlmdfrmBerTable | not-accessible | current | List of pm1004mAlmdfrmBer Article |
| 1.3.6.1.4.1.20044.29.2.3.2.129.1 | Rowpm1004mAlmdfrmBerEntry | not-accessible | current | Row definition for the pm1004mAlmdfrmBer table |
| 1.3.6.1.4.1.20044.29.2.3.2.129.1.1 | Columnpm1004mAlmdfrmBerIndex | read-only | current | Index definition for the pm1004mAlmdfrmBer table |
| 1.3.6.1.4.1.20044.29.2.3.2.129.1.2 | Columnpm1004mAlmLineSignalDegradePortn | read-only | current | Custom Line Signal Degrade :This OID indicates that the line input signal is DEGRADE. The assertion hysteresis can customized by the host <Condtype> LINE_SIGNA… |
| 1.3.6.1.4.1.20044.29.2.3.2.129.1.3 | Columnpm1004mAlmLineSignalFailPortn | read-only | current | Custom Line Signal Fail :This OID indicates that the line input signal is FAIL. The assertion hysteresis can be customized by the host <Condtype> LINE_SIGNAL_F… |
| 1.3.6.1.4.1.20044.29.2.3.2.129.1.6 | Columnpm1004mAlmLineDegradePortn | read-only | current | Fixed Line Signal Degrade :This OID indicates that the line input signal is DEGRADE. The assetion hysteresis is fixed to 10-8 (assertion) and 10-9 (de-assertio… |
| 1.3.6.1.4.1.20044.29.2.3.2.208 | Tablepm1004mAlmlineXfp1AlarmTable | not-accessible | current | List of pm1004mAlmlineXfp1Alarm Article |
| 1.3.6.1.4.1.20044.29.2.3.2.208.1 | Rowpm1004mAlmlineXfp1AlarmEntry | not-accessible | current | Row definition for the pm1004mAlmlineXfp1Alarm table |
| 1.3.6.1.4.1.20044.29.2.3.2.208.1.1 | Columnpm1004mAlmlineXfp1AlarmIndex | read-only | current | Index definition for the pm1004mAlmlineXfp1Alarm table |
| 1.3.6.1.4.1.20044.29.2.3.2.208.1.2 | Columnpm1004mAlmTxPowerLowAlarmPortn | read-only | current | Line Optical Tx Power Low :Alarm indicating that the XFP/OTX transmitter transmitter output power is lower than the threshold value written in the XFP/OTX EEPR… |
| 1.3.6.1.4.1.20044.29.2.3.2.208.1.3 | Columnpm1004mAlmTxPowerHighAlarmPortn | read-only | current | Line Optical Tx Power High :Alarm indicating that the XFP/OTX transmitter transmitter output power is higher than the threshold value written in the XFP EEPROM… |
| 1.3.6.1.4.1.20044.29.2.3.2.208.1.4 | Columnpm1004mAlmTxBiasLowAlarmPortn | read-only | current | Line Transceiver Bias Low :Alarm indicating that the XFP/OTX transmitter laser bias current is lower than the threshold value written in the XFP/OTX EEPROM <Co… |
| 1.3.6.1.4.1.20044.29.2.3.2.208.1.5 | Columnpm1004mAlmTxBiasHighAlarmPortn | read-only | current | Line Transceiver Bias High :Alarm indicating that the XFP/OTX transmitter laser bias current is higher than the threshold value written in the XFP EEPROM <Cond… |
| 1.3.6.1.4.1.20044.29.2.3.2.208.1.8 | Columnpm1004mAlmTempLowAlarmPortn | read-only | current | Line Transceiver Temp Low :Alarm indicating that the XFP/OTX temperature is lower than the threshold value written in the XFP/OTX EEPROM <Condtype> TEMP_LOW_AL… |
| 1.3.6.1.4.1.20044.29.2.3.2.208.1.9 | Columnpm1004mAlmTempHighAlarmPortn | read-only | current | Line Transceiver Temp High :Alarm indicating that the XFP/OTX temperature is higher than the threshold value written in the XFP EEPROM <Condtype> TEMP_HIGH_ALA… |
| 1.3.6.1.4.1.20044.29.2.3.2.208.1.16 | Columnpm1004mAlmRxPowerLowAlarmPortn | read-only | current | Line Optical Rx Power Low :Alarm indicating that the XFP received optical power is lower than the threshold value written in the XFP EEPROM <Condtype> RX_POWER… |
| 1.3.6.1.4.1.20044.29.2.3.2.208.1.17 | Columnpm1004mAlmRxPowerHighAlarmPortn | read-only | current | Line Optical Rx Power High :Alarm indicating that the XFP received optical power is higher than the threshold value written in the XFP EEPROM <Condtype> RX_POW… |
| 1.3.6.1.4.1.20044.29.2.3.2.212 | Tablepm1004mAlmlineXfp1SupplyAlarmTable | not-accessible | current | List of pm1004mAlmlineXfp1SupplyAlarm Article |
| 1.3.6.1.4.1.20044.29.2.3.2.212.1 | Rowpm1004mAlmlineXfp1SupplyAlarmEntry | not-accessible | current | Row definition for the pm1004mAlmlineXfp1SupplyAlarm table |
| 1.3.6.1.4.1.20044.29.2.3.2.212.1.1 | Columnpm1004mAlmlineXfp1SupplyAlarmIndex | read-only | current | Index definition for the pm1004mAlmlineXfp1SupplyAlarm table |
| 1.3.6.1.4.1.20044.29.2.3.2.212.1.2 | Columnpm1004mAlmVee5LowAlarmPortn | read-only | current | VEE5 Power Supply Low :Alarm indicating the XFP/OTX VEE5 power supply is lower than the threshold written in the EEPROM <Condtype> VEE5_LOW_ALARM_1 <Probcause>… |
| 1.3.6.1.4.1.20044.29.2.3.2.212.1.3 | Columnpm1004mAlmVee5HighAlarmPortn | read-only | current | VEE5 Power Supply High :Alarm indicating the XFP/OTX VEE5 power supply is higher than the threshold written in the EEPROM <Condtype> VEE5_HIGH_ALARM_1 <Probcau… |
| 1.3.6.1.4.1.20044.29.2.3.2.212.1.4 | Columnpm1004mAlmVcc2LowAlarmPortn | read-only | current | VCC2 Power Supply Low :Alarm indicating the XFP/OTX VCC2 power supply is lower than the threshold written in the EEPROM <Condtype> VCC2_LOW_ALARM_1 <Probcause>… |
| 1.3.6.1.4.1.20044.29.2.3.2.212.1.5 | Columnpm1004mAlmVcc2HighAlarmPortn | read-only | current | VCC2 Power Supply High :Alarm indicating the XFP/OTX VCC2 power supply is higher than the threshold written in the EEPROM <Condtype> VCC2_HIGH_ALARM_1 <Probcau… |
| 1.3.6.1.4.1.20044.29.2.3.2.212.1.6 | Columnpm1004mAlmVcc3LowAlarmPortn | read-only | current | VCC3 Power Supply Low :Alarm indicating the XFP/OTX VCC3 power supply is lower than the threshold written in the EEPROM <Condtype> VCC3_LOW_ALARM_1 <Probcause>… |
| 1.3.6.1.4.1.20044.29.2.3.2.212.1.7 | Columnpm1004mAlmVcc3HighAlarmPortn | read-only | current | VCC3 Power Supply High :Alarm indicating the XFP/OTX VCC3 power supply is higher than the threshold written in the EEPROM <Condtype> VCC3_HIGH_ALARM_1 <Probcau… |
| 1.3.6.1.4.1.20044.29.2.3.2.212.1.8 | Columnpm1004mAlmVcc5LowAlarmPortn | read-only | current | VCC5 Power Supply Low :Alarm indicating the XFP/OTX VCC5 power supply is lower than the threshold written in the EEPROM <Condtype> VCC5_LOW_ALARM_1 <Probcause>… |
| 1.3.6.1.4.1.20044.29.2.3.2.212.1.9 | Columnpm1004mAlmVcc5HighAlarmPortn | read-only | current | VCC5 Power Supply High :Alarm indicating the XFP/OTX VCC5 power supply is higher than the threshold written in the EEPROM <Condtype> VCC5_HIGH_ALARM_1 <Probcau… |
| 1.3.6.1.4.1.20044.29.2.3.2.212.1.10 | Columnpm1004mAlmVee5LowWarningPortn | read-only | current | VEE5 Power Supply Low Warning :Warning indicating the XFP/OTX VEE5 power supply is lower than the threshold written in the EEPROM <Condtype> VEE5_LOW_WARNING_1… |
| 1.3.6.1.4.1.20044.29.2.3.2.212.1.11 | Columnpm1004mAlmVee5HighWarningPortn | read-only | current | VEE5 Power Supply High Warning :Warning indicating the XFP/OTX VEE5 power supply is higher than the threshold written in the EEPROM <Condtype> VEE5_HIGH_WARNIN… |
| 1.3.6.1.4.1.20044.29.2.3.2.212.1.12 | Columnpm1004mAlmVcc2LowWarningPortn | read-only | current | VCC2 Power Supply Low Warning :Warning indicating the XFP/OTX VCC2 power supply is lower than the threshold written in the EEPROM <Condtype> VCC2_LOW_WARNING_1… |
| 1.3.6.1.4.1.20044.29.2.3.2.212.1.13 | Columnpm1004mAlmVcc2HighWarningPortn | read-only | current | VCC2 Power Supply High Warning :Warning indicating the XFP/OTX VCC2 power supply is higher than the threshold written in the EEPROM <Condtype> VCC2_HIGH_WARNIN… |
| 1.3.6.1.4.1.20044.29.2.3.2.212.1.14 | Columnpm1004mAlmVcc3LowWarningPortn | read-only | current | VCC3 Power Supply Low Warning :Warning indicating the XFP/OTX VCC3 power supply is lower than the threshold written in the EEPROM <Condtype> VCC3_LOW_WARNING_1… |
| 1.3.6.1.4.1.20044.29.2.3.2.212.1.15 | Columnpm1004mAlmVcc3HighWarningPortn | read-only | current | VCC3 Power Supply High Warning :Warning indicating the XFP/OTX VCC3 power supply is higher than the threshold written in the EEPROM <Condtype> VCC3_HIGH_WARNIN… |
| 1.3.6.1.4.1.20044.29.2.3.2.212.1.16 | Columnpm1004mAlmVcc5LowWarningPortn | read-only | current | VCC5 Power Supply Low Warning :Warning indicating the XFP/OTX VCC5 power supply is lower than the threshold written in the EEPROM <Condtype> VCC5_LOW_WARNING_1… |
| 1.3.6.1.4.1.20044.29.2.3.2.212.1.17 | Columnpm1004mAlmVcc5HighWarningPortn | read-only | current | VCC5 Power Supply High Warning :Warning indicating the XFP/OTX VCC5 power supply is higher than the threshold written in the EEPROM <Condtype> VCC5_HIGH_WARNIN… |
| 1.3.6.1.4.1.20044.29.2.3.2.224 | Tablepm1004mAlmlineOtx1TlhAlarmsTable | not-accessible | current | List of pm1004mAlmlineOtx1TlhAlarms Article |
| 1.3.6.1.4.1.20044.29.2.3.2.224.1 | Rowpm1004mAlmlineOtx1TlhAlarmsEntry | not-accessible | current | Row definition for the pm1004mAlmlineOtx1TlhAlarms table |
| 1.3.6.1.4.1.20044.29.2.3.2.224.1.1 | Columnpm1004mAlmlineOtx1TlhAlarmsIndex | read-only | current | Index definition for the pm1004mAlmlineOtx1TlhAlarms table |
| 1.3.6.1.4.1.20044.29.2.3.2.224.1.6 | Columnpm1004mAlmLineModulatorAgingHighAlaPortn | read-only | current | Line Modulator Aging High Alarm :Alarm indicating the Line OTX TLH modulator aging is higher than the threshold written in the EEPROM <Condtype> LINE_MODULATOR… |
| 1.3.6.1.4.1.20044.29.2.3.2.224.1.7 | Columnpm1004mAlmLineAgingHighAlaPortn | read-only | current | Line OTX TLH Aging High Alarm :Alarm indicating the Line OTX TLH aging is higher than the threshold written in the EEPROM <Condtype> LINE_AGING_HIGH_ALA_1 <Pro… |
| 1.3.6.1.4.1.20044.29.2.3.2.224.1.13 | Columnpm1004mAlmLineFreqDevHighAlaPortn | read-only | current | Line Freq. Deviation High Alarm :Alarm indicating the Line OTX TLH frequency deviation is higher than the threshold written in the EEPROM <Condtype> LINE_FREQ_… |
| 1.3.6.1.4.1.20044.29.2.3.2.224.1.15 | Columnpm1004mAlmLineLaserTempHighAlaPortn | read-only | current | Line Laser Temp. High Alarm :Alarm indicating the Line OTX TLH laser temperature is higher than the threshold written in the EEPROM <Condtype> LINE_LASER_TEMP_… |
| 1.3.6.1.4.1.20044.29.2.3.3 | Nodepm1004mAlmLineCrit | |||
| 1.3.6.1.4.1.20044.29.2.3.3.7 | Tablepm1004mAlmsynthAlmLineTable | not-accessible | current | List of pm1004mAlmsynthAlmLine Article |
| 1.3.6.1.4.1.20044.29.2.3.3.7.1 | Rowpm1004mAlmsynthAlmLineEntry | not-accessible | current | Row definition for the pm1004mAlmsynthAlmLine table |
| 1.3.6.1.4.1.20044.29.2.3.3.7.1.1 | Columnpm1004mAlmsynthAlmLineIndex | read-only | current | Index definition for the pm1004mAlmsynthAlmLine table |
| 1.3.6.1.4.1.20044.29.2.3.3.7.1.2 | Columnpm1004mAlmXfpAbsentPortn | read-only | current | Line Optical Module Absent :This OID indicates that the line optical interface (XFP or OTX) is not plugged in. <Help> This alarm indicates if the line transcei… |
| 1.3.6.1.4.1.20044.29.2.3.3.7.1.3 | Columnpm1004mAlmXfpInitNotComplPortn | read-only | current | Line Optical Module Ready :This OID indicates that the optical interface (XFP or OTX) is not operational. <Help> This status indicates if the line transceiver … |
| 1.3.6.1.4.1.20044.29.2.3.3.7.1.5 | Columnpm1004mAlmLineHwFailPortn | read-only | current | Line Port HW Failure :This OID indicates a failure on line port, most probably caused by a HW issue <Condtype> LINE_HW_FAIL <Probcause> equipmentMalfunction (1… |
| 1.3.6.1.4.1.20044.29.2.3.3.7.1.6 | Columnpm1004mAlmXfpTxOffPortn | read-only | current | Line Optical Module Laser Shutdown :This OID indicates the line optical output power is on <Help> This status indicates if the line transceiver laser is ON or … |
| 1.3.6.1.4.1.20044.29.2.3.3.7.1.7 | Columnpm1004mAlmLineLocalOosPortn | read-only | current | Line Port In Service :This OID indicates that the Line port is In Service (1) of Out or Service (2) <Help> This status indicates if the line port is in service… |
| 1.3.6.1.4.1.20044.29.2.3.3.7.1.9 | Columnpm1004mAlmUpRdiInsPortn | read-only | current | MS-RDI/L-RDI Inserted On Line :This OID indicates an upstream MS-RDI/L-RDI has been inserted in the outgoing OC192/STM64 signal. <Help> This status indicates i… |
| 1.3.6.1.4.1.20044.29.2.3.3.7.1.10 | Columnpm1004mAlmLineDdmWarningPortn | read-only | current | Warning On Line Optical Module DDM :This OID indicates a warning is present coming out of Line optical interface DDM <Help> This alarm indicates if a DDM Warni… |
| 1.3.6.1.4.1.20044.29.2.3.3.7.1.11 | Columnpm1004mAlmLineDdmAlmPortn | read-only | current | Alarm On Line Optical Module DDM :This OID indicates an alarm is present coming out of Line optical interface DDM <Help> This alarm indicates if a DDM Alarm ha… |
| 1.3.6.1.4.1.20044.29.2.3.3.7.1.13 | Columnpm1004mAlmLineFailPortn | read-only | current | Line Port Failure :This OID indicates a failure on the line port <Condtype> LINE_FAIL <Probcause> equipmentMalfunction (16) <Alarmtype> synthesisAlarm (12) <Po… |
| 1.3.6.1.4.1.20044.29.2.3.3.7.1.17 | Columnpm1004mAlmLineActivePortn | read-only | current | Line Active :This bit indicates the line #n is active on receive side <Help> This status indicates whether the line is active or standby. <Condtype> LINE_ACTIV… |
| 1.3.6.1.4.1.20044.29.2.3.3.128 | Tablepm1004mAlmdfrmAlmTable | not-accessible | current | List of pm1004mAlmdfrmAlm Article |
| 1.3.6.1.4.1.20044.29.2.3.3.128.1 | Rowpm1004mAlmdfrmAlmEntry | not-accessible | current | Row definition for the pm1004mAlmdfrmAlm table |
| 1.3.6.1.4.1.20044.29.2.3.3.128.1.1 | Columnpm1004mAlmdfrmAlmIndex | read-only | current | Index definition for the pm1004mAlmdfrmAlm table |
| 1.3.6.1.4.1.20044.29.2.3.3.128.1.2 | Columnpm1004mAlmDwAisDetPortn | read-only | current | MS-AIS/L-AIS Detected On Line Input :This OID indicates that an MS-AIS has been detected on the input signal <Help> This alarm indicates if there is a AIS is d… |
| 1.3.6.1.4.1.20044.29.2.3.3.128.1.3 | Columnpm1004mAlmDwRdiDetPortn | read-only | current | MS-RDI/L-RDI Detected On Line Input :This OID indicates that an MS-RDI has been detected on the input signal <Help> This alarm indicates if there is a RDI is d… |
| 1.3.6.1.4.1.20044.29.2.3.3.128.1.4 | Columnpm1004mAlmDwOofPortn | read-only | current | SONET/SDH Line Out Of Frame :This OID indicates that an Out Of Frame has been detected on the input signal <Help> This alarm indicates if there is a Out of Fra… |
| 1.3.6.1.4.1.20044.29.2.3.3.128.1.5 | Columnpm1004mAlmDwLofPortn | read-only | current | SONET/SDH Line Loss Of Frame :This OID indicates that a Loss Of Frame has been detected on the input signal <Help> This alarm indicates if there is a Loss of F… |
| 1.3.6.1.4.1.20044.29.2.3.3.133 | Tablepm1004mAlmlineSyncAlarmsTable | not-accessible | current | List of pm1004mAlmlineSyncAlarms Article |
| 1.3.6.1.4.1.20044.29.2.3.3.133.1 | Rowpm1004mAlmlineSyncAlarmsEntry | not-accessible | current | Row definition for the pm1004mAlmlineSyncAlarms table |
| 1.3.6.1.4.1.20044.29.2.3.3.133.1.1 | Columnpm1004mAlmlineSyncAlarmsIndex | read-only | current | Index definition for the pm1004mAlmlineSyncAlarms table |
| 1.3.6.1.4.1.20044.29.2.3.3.133.1.13 | Columnpm1004mAlmDwLockerrPortn | read-only | current | Downstream Clock Lock Error :This OID indicates that the deserializer input 10 Gb/s clock recovery is not locked. <Condtype> DW_LOCKERR <Probcause> receiveFail… |
| 1.3.6.1.4.1.20044.29.2.3.3.133.1.14 | Columnpm1004mAlmUpLockerrPortn | read-only | current | Upstream Clock Lock Error :This OID indicates that the serializer output 10 Gb/s clock multiplier unit is not locked. <Condtype> UP_LOCKERR <Probcause> receive… |
| 1.3.6.1.4.1.20044.29.2.3.3.133.1.17 | Columnpm1004mAlmDwLosPortn | read-only | current | Line Input Loss Of Signal :This OID indicates a loss of signal on the 10 Gb/s input. <Help> This alarm indicates if an optical signal is detected on the line t… |
| 1.3.6.1.4.1.20044.29.2.3.3.211 | Tablepm1004mAlmlineXfp1AlarmsTable | not-accessible | current | List of pm1004mAlmlineXfp1Alarms Article |
| 1.3.6.1.4.1.20044.29.2.3.3.211.1 | Rowpm1004mAlmlineXfp1AlarmsEntry | not-accessible | current | Row definition for the pm1004mAlmlineXfp1Alarms table |
| 1.3.6.1.4.1.20044.29.2.3.3.211.1.1 | Columnpm1004mAlmlineXfp1AlarmsIndex | read-only | current | Index definition for the pm1004mAlmlineXfp1Alarms table |
| 1.3.6.1.4.1.20044.29.2.3.3.211.1.3 | Columnpm1004mAlmModNrPortn | read-only | current | Line Optical Module Not Ready :This OID indicates that the module is unable to determine correct data. <Help> This alarm indicates if the line transceiver is r… |
| 1.3.6.1.4.1.20044.29.2.3.3.211.1.4 | Columnpm1004mAlmRxCdrNotLockedPortn | read-only | current | Line Optical Rx CDR Unlocked :This OID indicates that a loss of lock on the receiving side CDR has been detected <Help> This alarm indicates if the Rx CDR is l… |
| 1.3.6.1.4.1.20044.29.2.3.3.211.1.6 | Columnpm1004mAlmRxNrPortn | read-only | current | Line Optical Rx Not Ready :This OID indicates that a condition has arisen leading to invalid data on the receiving side. <Help> This alarm indicates if the Rx … |
| 1.3.6.1.4.1.20044.29.2.3.3.211.1.7 | Columnpm1004mAlmTxCdrNotLockedPortn | read-only | current | Line Optical Tx CDR Unlocked :This OID indicates a loss of lock on the transmitting side CDR has been detected. <Help> This alarm indicates if the Tx CDR is lo… |
| 1.3.6.1.4.1.20044.29.2.3.3.211.1.8 | Columnpm1004mAlmTxFaultPortn | read-only | current | Line Optical Tx Failure :This OID indicates a fault condition on the laser detected by the safety syste <Help> This alarm indicates if the laser of the line tr… |
| 1.3.6.1.4.1.20044.29.2.3.3.211.1.9 | Columnpm1004mAlmTxNrPortn | read-only | current | Line Optical Tx Not Ready :This OID indicates a condition has arisen leading to invalid data on the transmitting side <Help> This alarm indicates if the Tx par… |
| 1.3.6.1.4.1.20044.29.2.3.3.211.1.15 | Columnpm1004mAlmWavelengthUnlockedPortn | read-only | current | Line Optical Tx Wavelength Unlocked :This OID indicates that the wavelength error is exceeding the manufacturer tolerance <Help> This alarm indicates if the wa… |
| 1.3.6.1.4.1.20044.29.2.3.3.211.1.16 | Columnpm1004mAlmTecFaultPortn | read-only | current | Line Optical Tx Temp Regul Failed :This OID indicates a failure on the TEC module <Help> This alarm indicates if the TEC of the line transceiver is in fail con… |
| 1.3.6.1.4.1.20044.29.2.3.3.211.1.17 | Columnpm1004mAlmApdSupplyFaultPortn | read-only | current | Line Rx Photodiode Power Failed :This OID indicates a failure on the APD power supply <Help> This alarm indicates if the APD power supply is in fail condition … |
| 1.3.6.1.4.1.20044.29.3 | Nodepm1004mmeasures | |||
| 1.3.6.1.4.1.20044.29.3.1 | Nodepm1004mMesrOther | |||
| 1.3.6.1.4.1.20044.29.3.1.0 | Scalarpm1004mMesrsynth0 | read-only | deprecated | Not Used :This OID gives the unit used on AUX1 measurement of XFP#1 (Unit = ) |
| 1.3.6.1.4.1.20044.29.3.1.1 | Scalarpm1004mMesrsynth1 | read-only | deprecated | Not Used :This OID gives the unit used on AUX2 measurement of XFP#1 (Unit = ) |
| 1.3.6.1.4.1.20044.29.3.2 | Nodepm1004mMesrClient | |||
| 1.3.6.1.4.1.20044.29.3.2.16 | Tablepm1004mMesrtempMeasTable | not-accessible | current | List of pm1004mMesrtempMeas Article |
| 1.3.6.1.4.1.20044.29.3.2.16.1 | Rowpm1004mMesrtempMeasEntry | not-accessible | current | Row definition for the pm1004mMesrtempMeas table |
| 1.3.6.1.4.1.20044.29.3.2.16.1.1 | Columnpm1004mMesrtempMeasIndex | read-only | current | Index definition for the pm1004mMesrtempMeas table |
| 1.3.6.1.4.1.20044.29.3.2.16.1.2 | Columnpm1004mMesrtempMeasPortn | read-only | current | Client SFP Temperature :This OID gives the temperature value of the SFP plugged in port, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/25… |
| 1.3.6.1.4.1.20044.29.3.2.24 | Tablepm1004mMesrvoltMeasTable | not-accessible | current | List of pm1004mMesrvoltMeas Article |
| 1.3.6.1.4.1.20044.29.3.2.24.1 | Rowpm1004mMesrvoltMeasEntry | not-accessible | current | Row definition for the pm1004mMesrvoltMeas table |
| 1.3.6.1.4.1.20044.29.3.2.24.1.1 | Columnpm1004mMesrvoltMeasIndex | read-only | current | Index definition for the pm1004mMesrvoltMeas table |
| 1.3.6.1.4.1.20044.29.3.2.24.1.2 | Columnpm1004mMesrvoltMeasPortn | read-only | current | Client SFP Power Supply :This OID gives the 3V3 voltage value of the SFP plugged into port, read from the DDM (Digital Diagnostic Monitoring) (Voltage = AV/100… |
| 1.3.6.1.4.1.20044.29.3.2.32 | Tablepm1004mMesrbiasMeasTable | not-accessible | current | List of pm1004mMesrbiasMeas Article |
| 1.3.6.1.4.1.20044.29.3.2.32.1 | Rowpm1004mMesrbiasMeasEntry | not-accessible | current | Row definition for the pm1004mMesrbiasMeas table |
| 1.3.6.1.4.1.20044.29.3.2.32.1.1 | Columnpm1004mMesrbiasMeasIndex | read-only | current | Index definition for the pm1004mMesrbiasMeas table |
| 1.3.6.1.4.1.20044.29.3.2.32.1.2 | Columnpm1004mMesrbiasMeasPortn | read-only | current | Client SFP Laser Bias :This OID gives the bias value of the SFP plugged into port, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/500) (Unit = mA… |
| 1.3.6.1.4.1.20044.29.3.2.40 | Tablepm1004mMesrtxpwrMeasTable | not-accessible | current | List of pm1004mMesrtxpwrMeas Article |
| 1.3.6.1.4.1.20044.29.3.2.40.1 | Rowpm1004mMesrtxpwrMeasEntry | not-accessible | current | Row definition for the pm1004mMesrtxpwrMeas table |
| 1.3.6.1.4.1.20044.29.3.2.40.1.1 | Columnpm1004mMesrtxpwrMeasIndex | read-only | current | Index definition for the pm1004mMesrtxpwrMeas table |
| 1.3.6.1.4.1.20044.29.3.2.40.1.2 | Columnpm1004mMesrtxpwrMeasPortn | read-only | current | Client SFP Tx Power :This OID gives the transmit power value of the SFP plugged into port, read from the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV… |
| 1.3.6.1.4.1.20044.29.3.2.48 | Tablepm1004mMesrrxpwrMeasTable | not-accessible | current | List of pm1004mMesrrxpwrMeas Article |
| 1.3.6.1.4.1.20044.29.3.2.48.1 | Rowpm1004mMesrrxpwrMeasEntry | not-accessible | current | Row definition for the pm1004mMesrrxpwrMeas table |
| 1.3.6.1.4.1.20044.29.3.2.48.1.1 | Columnpm1004mMesrrxpwrMeasIndex | read-only | current | Index definition for the pm1004mMesrrxpwrMeas table |
| 1.3.6.1.4.1.20044.29.3.2.48.1.2 | Columnpm1004mMesrrxpwrMeasPortn | read-only | current | Client SFP Rx Power :This OID gives the receive power value of the SFP plugged into port, read in the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-4… |
| 1.3.6.1.4.1.20044.29.3.3 | Nodepm1004mMesrLine | |||
| 1.3.6.1.4.1.20044.29.3.3.208 | Tablepm1004mMesrxfp1LxModTempMeasTable | not-accessible | current | List of pm1004mMesrxfp1LxModTempMeas Article |
| 1.3.6.1.4.1.20044.29.3.3.208.1 | Rowpm1004mMesrxfp1LxModTempMeasEntry | not-accessible | current | Row definition for the pm1004mMesrxfp1LxModTempMeas table |
| 1.3.6.1.4.1.20044.29.3.3.208.1.1 | Columnpm1004mMesrxfp1LxModTempMeasIndex | read-only | current | Index definition for the pm1004mMesrxfp1LxModTempMeas table |
| 1.3.6.1.4.1.20044.29.3.3.208.1.2 | Columnpm1004mMesrxfp1LxModTempMeasPortn | read-only | current | Line Optical Module Temperature :This OID gives the temperature of the XFP or OTX plugged in line, read from the DDM (Digital Diagnostic Monitoring) (Temperatu… |
| 1.3.6.1.4.1.20044.29.3.3.209 | Tablepm1004mMesrxfp1ReservedTable | not-accessible | deprecated | List of pm1004mMesrxfp1Reserved Article |
| 1.3.6.1.4.1.20044.29.3.3.209.1 | Rowpm1004mMesrxfp1ReservedEntry | not-accessible | deprecated | Row definition for the pm1004mMesrxfp1Reserved table |
| 1.3.6.1.4.1.20044.29.3.3.209.1.1 | Columnpm1004mMesrxfp1ReservedIndex | read-only | deprecated | Index definition for the pm1004mMesrxfp1Reserved table |
| 1.3.6.1.4.1.20044.29.3.3.209.1.2 | Columnpm1004mMesrxfp1ReservedPortn | read-only | deprecated | Not Used :Reserved |
| 1.3.6.1.4.1.20044.29.3.3.210 | Tablepm1004mMesrxfp1LoBiasCurrentMeasTable | not-accessible | current | List of pm1004mMesrxfp1LoBiasCurrentMeas Article |
| 1.3.6.1.4.1.20044.29.3.3.210.1 | Rowpm1004mMesrxfp1LoBiasCurrentMeasEntry | not-accessible | current | Row definition for the pm1004mMesrxfp1LoBiasCurrentMeas table |
| 1.3.6.1.4.1.20044.29.3.3.210.1.1 | Columnpm1004mMesrxfp1LoBiasCurrentMeasIndex | read-only | current | Index definition for the pm1004mMesrxfp1LoBiasCurrentMeas table |
| 1.3.6.1.4.1.20044.29.3.3.210.1.2 | Columnpm1004mMesrxfp1LoBiasCurrentMeasPortn | read-only | current | Line Optical Module Laser Bias :This OID gives the bias value of the XFP or OTX plugged in line , read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/… |
| 1.3.6.1.4.1.20044.29.3.3.211 | Tablepm1004mMesrxfp1LoTxPowerMeasTable | not-accessible | current | List of pm1004mMesrxfp1LoTxPowerMeas Article |
| 1.3.6.1.4.1.20044.29.3.3.211.1 | Rowpm1004mMesrxfp1LoTxPowerMeasEntry | not-accessible | current | Row definition for the pm1004mMesrxfp1LoTxPowerMeas table |
| 1.3.6.1.4.1.20044.29.3.3.211.1.1 | Columnpm1004mMesrxfp1LoTxPowerMeasIndex | read-only | current | Index definition for the pm1004mMesrxfp1LoTxPowerMeas table |
| 1.3.6.1.4.1.20044.29.3.3.211.1.2 | Columnpm1004mMesrxfp1LoTxPowerMeasPortn | read-only | current | Line Optical Module Tx Power :This OID gives the transmit power value of the XFP or OTX plugged in line , read from the DDM (Digital Diagnostic Monitoring) (Po… |
| 1.3.6.1.4.1.20044.29.3.3.212 | Tablepm1004mMesrxfp1LiRxPowerMeasTable | not-accessible | current | List of pm1004mMesrxfp1LiRxPowerMeas Article |
| 1.3.6.1.4.1.20044.29.3.3.212.1 | Rowpm1004mMesrxfp1LiRxPowerMeasEntry | not-accessible | current | Row definition for the pm1004mMesrxfp1LiRxPowerMeas table |
| 1.3.6.1.4.1.20044.29.3.3.212.1.1 | Columnpm1004mMesrxfp1LiRxPowerMeasIndex | read-only | current | Index definition for the pm1004mMesrxfp1LiRxPowerMeas table |
| 1.3.6.1.4.1.20044.29.3.3.212.1.2 | Columnpm1004mMesrxfp1LiRxPowerMeasPortn | read-only | current | Line Optical Module Rx Power :This OID gives the receive power value of the XFP or OTX plugged in line , read from the DDM (Digital Diagnostic Monitoring) (Pow… |
| 1.3.6.1.4.1.20044.29.3.3.213 | Tablepm1004mMesrxfp1LxAux1MeasTable | not-accessible | deprecated | List of pm1004mMesrxfp1LxAux1Meas Article |
| 1.3.6.1.4.1.20044.29.3.3.213.1 | Rowpm1004mMesrxfp1LxAux1MeasEntry | not-accessible | deprecated | Row definition for the pm1004mMesrxfp1LxAux1Meas table |
| 1.3.6.1.4.1.20044.29.3.3.213.1.1 | Columnpm1004mMesrxfp1LxAux1MeasIndex | read-only | deprecated | Index definition for the pm1004mMesrxfp1LxAux1Meas table |
| 1.3.6.1.4.1.20044.29.3.3.213.1.2 | Columnpm1004mMesrxfp1LxAux1MeasPortn | read-only | deprecated | Not Used :This OID gives the receive power value read in the DDM (Digital Diagnostic Monitoring) of the XFP or OTX plugged in line (Unit = ?) |
| 1.3.6.1.4.1.20044.29.3.3.214 | Tablepm1004mMesrxfp1LxAux2MeasTable | not-accessible | deprecated | List of pm1004mMesrxfp1LxAux2Meas Article |
| 1.3.6.1.4.1.20044.29.3.3.214.1 | Rowpm1004mMesrxfp1LxAux2MeasEntry | not-accessible | deprecated | Row definition for the pm1004mMesrxfp1LxAux2Meas table |
| 1.3.6.1.4.1.20044.29.3.3.214.1.1 | Columnpm1004mMesrxfp1LxAux2MeasIndex | read-only | deprecated | Index definition for the pm1004mMesrxfp1LxAux2Meas table |
| 1.3.6.1.4.1.20044.29.3.3.214.1.2 | Columnpm1004mMesrxfp1LxAux2MeasPortn | read-only | deprecated | Not Used :This OID gives the receive power value read in the DDM (Digital Diagnostic Monitoring) of the XFP or OTX plugged in line (Unit = ?) |
| 1.3.6.1.4.1.20044.29.3.3.224 | Tablepm1004mMesrotx1AgingTable | not-accessible | current | List of pm1004mMesrotx1Aging Article |
| 1.3.6.1.4.1.20044.29.3.3.224.1 | Rowpm1004mMesrotx1AgingEntry | not-accessible | current | Row definition for the pm1004mMesrotx1Aging table |
| 1.3.6.1.4.1.20044.29.3.3.224.1.1 | Columnpm1004mMesrotx1AgingIndex | read-only | current | Index definition for the pm1004mMesrotx1Aging table |
| 1.3.6.1.4.1.20044.29.3.3.224.1.2 | Columnpm1004mMesrotx1AgingPortn | read-only | current | Line OTX TLH Aging :This OID gives the aging of the Line OTX TLH, read from the DDM (Digital Diagnostic Monitoring) (Aging = AV) (Unit = %) <Help> This measure… |
| 1.3.6.1.4.1.20044.29.3.3.225 | Tablepm1004mMesrotx1LaserTemperatureTable | not-accessible | deprecated | List of pm1004mMesrotx1LaserTemperature Article |
| 1.3.6.1.4.1.20044.29.3.3.225.1 | Rowpm1004mMesrotx1LaserTemperatureEntry | not-accessible | deprecated | Row definition for the pm1004mMesrotx1LaserTemperature table |
| 1.3.6.1.4.1.20044.29.3.3.225.1.1 | Columnpm1004mMesrotx1LaserTemperatureIndex | read-only | deprecated | Index definition for the pm1004mMesrotx1LaserTemperature table |
| 1.3.6.1.4.1.20044.29.3.3.225.1.2 | Columnpm1004mMesrotx1LaserTemperaturePortn | read-only | deprecated | Line OTX TLH Laser Temperature :This OID gives the laser temperature of the Line OTX TLH, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/2… |
| 1.3.6.1.4.1.20044.29.3.3.226 | Tablepm1004mMesrotx1FreqDeviationTable | not-accessible | current | List of pm1004mMesrotx1FreqDeviation Article |
| 1.3.6.1.4.1.20044.29.3.3.226.1 | Rowpm1004mMesrotx1FreqDeviationEntry | not-accessible | current | Row definition for the pm1004mMesrotx1FreqDeviation table |
| 1.3.6.1.4.1.20044.29.3.3.226.1.1 | Columnpm1004mMesrotx1FreqDeviationIndex | read-only | current | Index definition for the pm1004mMesrotx1FreqDeviation table |
| 1.3.6.1.4.1.20044.29.3.3.226.1.2 | Columnpm1004mMesrotx1FreqDeviationPortn | read-only | current | Line OTX TLH Frequency Deviation :This OID gives the frequency deviation of the Line OTX TLH, read from the DDM (Digital Diagnostic Monitoring) (Deviation = (A… |
| 1.3.6.1.4.1.20044.29.3.3.227 | Tablepm1004mMesrotx1LaserWvlengthTable | not-accessible | current | List of pm1004mMesrotx1LaserWvlength Article |
| 1.3.6.1.4.1.20044.29.3.3.227.1 | Rowpm1004mMesrotx1LaserWvlengthEntry | not-accessible | current | Row definition for the pm1004mMesrotx1LaserWvlength table |
| 1.3.6.1.4.1.20044.29.3.3.227.1.1 | Columnpm1004mMesrotx1LaserWvlengthIndex | read-only | current | Index definition for the pm1004mMesrotx1LaserWvlength table |
| 1.3.6.1.4.1.20044.29.3.3.227.1.2 | Columnpm1004mMesrotx1LaserWvlengthPortn | read-only | current | Line Optical Module Wavelength :This OID gives the laser wavelength of the Line OTX TLH, read from the DDM (Digital Diagnostic Monitoring) (Wavelength=29979245… |
| 1.3.6.1.4.1.20044.29.4 | Nodepm1004mcounters | |||
| 1.3.6.1.4.1.20044.29.4.1 | Nodepm1004mCntOther | |||
| 1.3.6.1.4.1.20044.29.4.2 | Nodepm1004mCntClient | |||
| 1.3.6.1.4.1.20044.29.4.2.16 | Tablepm1004mCntupRaRemCntTable | not-accessible | current | List of pm1004mCntupRaRemCnt Article |
| 1.3.6.1.4.1.20044.29.4.2.16.1 | Rowpm1004mCntupRaRemCntEntry | not-accessible | current | Row definition for the pm1004mCntupRaRemCnt table |
| 1.3.6.1.4.1.20044.29.4.2.16.1.1 | Columnpm1004mCntupRaRemCntIndex | read-only | current | Index definition for the pm1004mCntupRaRemCnt table |
| 1.3.6.1.4.1.20044.29.4.2.16.1.2 | Columnpm1004mCntupRaRemCntValuePortn | read-only | current | Client Rate Adapt. Words Removal :This counter is incremented each time a rate adaptation 10B word is removed from the Client input stream |
| 1.3.6.1.4.1.20044.29.4.2.16.1.3 | Columnpm1004mCntupRaRemCntErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the rate adaptation removal counter value is invalid on Port |
| 1.3.6.1.4.1.20044.29.4.2.16.1.4 | Columnpm1004mCntupRaRemCntOverloadPortn | read-only | current | Client Counter Overload :This OID when set indicates a rate adaptation removal counter overload on Port |
| 1.3.6.1.4.1.20044.29.4.2.24 | Tablepm1004mCntupRaInsCntTable | not-accessible | current | List of pm1004mCntupRaInsCnt Article |
| 1.3.6.1.4.1.20044.29.4.2.24.1 | Rowpm1004mCntupRaInsCntEntry | not-accessible | current | Row definition for the pm1004mCntupRaInsCnt table |
| 1.3.6.1.4.1.20044.29.4.2.24.1.1 | Columnpm1004mCntupRaInsCntIndex | read-only | current | Index definition for the pm1004mCntupRaInsCnt table |
| 1.3.6.1.4.1.20044.29.4.2.24.1.2 | Columnpm1004mCntupRaInsCntValuePortn | read-only | current | Client Rate Adapt. Words Insertion :This counter is incremented each time a rate adaptation 10B word is inserted in the Client input stream |
| 1.3.6.1.4.1.20044.29.4.2.24.1.3 | Columnpm1004mCntupRaInsCntErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the rate adaptation insertion counter value is invalid on Port |
| 1.3.6.1.4.1.20044.29.4.2.24.1.4 | Columnpm1004mCntupRaInsCntOverloadPortn | read-only | current | Client Counter Overload :This OID when set indicates a rate adaptation insertion counter overload on Port |
| 1.3.6.1.4.1.20044.29.4.2.32 | Tablepm1004mCntupRdErrCntTable | not-accessible | current | List of pm1004mCntupRdErrCnt Article |
| 1.3.6.1.4.1.20044.29.4.2.32.1 | Rowpm1004mCntupRdErrCntEntry | not-accessible | current | Row definition for the pm1004mCntupRdErrCnt table |
| 1.3.6.1.4.1.20044.29.4.2.32.1.1 | Columnpm1004mCntupRdErrCntIndex | read-only | current | Index definition for the pm1004mCntupRdErrCnt table |
| 1.3.6.1.4.1.20044.29.4.2.32.1.2 | Columnpm1004mCntupRdErrCntValuePortn | read-only | current | Client Input Errors :This counter is increased each time a 10b/8b running disparity error is detected on the Client input stream <Help> This counter gives the … |
| 1.3.6.1.4.1.20044.29.4.2.32.1.3 | Columnpm1004mCntupRdErrCntErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the client error counter value is invalid on Port |
| 1.3.6.1.4.1.20044.29.4.2.32.1.4 | Columnpm1004mCntupRdErrCntOverloadPortn | read-only | current | Client Counter Overload :This OID when set indicates a client input error counter overload on Port |
| 1.3.6.1.4.1.20044.29.4.2.40 | Tablepm1004mCntupTimCntTable | not-accessible | current | List of pm1004mCntupTimCnt Article |
| 1.3.6.1.4.1.20044.29.4.2.40.1 | Rowpm1004mCntupTimCntEntry | not-accessible | current | Row definition for the pm1004mCntupTimCnt table |
| 1.3.6.1.4.1.20044.29.4.2.40.1.1 | Columnpm1004mCntupTimCntIndex | read-only | current | Index definition for the pm1004mCntupTimCnt table |
| 1.3.6.1.4.1.20044.29.4.2.40.1.2 | Columnpm1004mCntupTimCntValuePortn | read-only | current | Client Upstream Timer Counter :This is the timing counter dedicated to the upstream access counters. It is incremented every 125 us. |
| 1.3.6.1.4.1.20044.29.4.2.40.1.3 | Columnpm1004mCntupTimCntErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the upstream timing counter value is invalid on Port |
| 1.3.6.1.4.1.20044.29.4.2.40.1.4 | Columnpm1004mCntupTimCntOverloadPortn | read-only | current | Client Counter Overload :This OID when set indicates a upstream timing counter overload on Port |
| 1.3.6.1.4.1.20044.29.4.2.48 | Tablepm1004mCntupCvErrCntTable | not-accessible | current | List of pm1004mCntupCvErrCnt Article |
| 1.3.6.1.4.1.20044.29.4.2.48.1 | Rowpm1004mCntupCvErrCntEntry | not-accessible | current | Row definition for the pm1004mCntupCvErrCnt table |
| 1.3.6.1.4.1.20044.29.4.2.48.1.1 | Columnpm1004mCntupCvErrCntIndex | read-only | current | Index definition for the pm1004mCntupCvErrCnt table |
| 1.3.6.1.4.1.20044.29.4.2.48.1.2 | Columnpm1004mCntupCvErrCntValuePortn | read-only | current | Client Coding Violation Counter :This counter is increased each time a 10b/8b coding violation is detected on the Client input stream |
| 1.3.6.1.4.1.20044.29.4.2.48.1.3 | Columnpm1004mCntupCvErrCntErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the coding violation counter value is invalid on Port |
| 1.3.6.1.4.1.20044.29.4.2.48.1.4 | Columnpm1004mCntupCvErrCntOverloadPortn | read-only | current | Client Counter Overload :This OID when set indicates a coding violation counter overload on Port |
| 1.3.6.1.4.1.20044.29.4.2.72 | Tablepm1004mCntdwTimCntTable | not-accessible | current | List of pm1004mCntdwTimCnt Article |
| 1.3.6.1.4.1.20044.29.4.2.72.1 | Rowpm1004mCntdwTimCntEntry | not-accessible | current | Row definition for the pm1004mCntdwTimCnt table |
| 1.3.6.1.4.1.20044.29.4.2.72.1.1 | Columnpm1004mCntdwTimCntIndex | read-only | current | Index definition for the pm1004mCntdwTimCnt table |
| 1.3.6.1.4.1.20044.29.4.2.72.1.2 | Columnpm1004mCntdwTimCntValuePortn | read-only | current | Client Downstream Timer Counter :This is the timing counter dedicated to the downstream access counters. It is incremented every 125 us. |
| 1.3.6.1.4.1.20044.29.4.2.72.1.3 | Columnpm1004mCntdwTimCntErrorPortn | read-only | current | Client Counter Error :This OID when set indicates the downstream timer counter value is invalid on Port |
| 1.3.6.1.4.1.20044.29.4.2.72.1.4 | Columnpm1004mCntdwTimCntOverloadPortn | read-only | current | Client Counter Overload :This OID when set indicates a downstream timer counter overload on Port |
| 1.3.6.1.4.1.20044.29.4.3 | Nodepm1004mCntLine | |||
| 1.3.6.1.4.1.20044.29.4.3.152 | Tablepm1004mCntdfrmB1ErrCntTable | not-accessible | current | List of pm1004mCntdfrmB1ErrCnt Article |
| 1.3.6.1.4.1.20044.29.4.3.152.1 | Rowpm1004mCntdfrmB1ErrCntEntry | not-accessible | current | Row definition for the pm1004mCntdfrmB1ErrCnt table |
| 1.3.6.1.4.1.20044.29.4.3.152.1.1 | Columnpm1004mCntdfrmB1ErrCntIndex | read-only | current | Index definition for the pm1004mCntdfrmB1ErrCnt table |
| 1.3.6.1.4.1.20044.29.4.3.152.1.2 | Columnpm1004mCntdfrmB1ErrCntValuePortn | read-only | current | Line Input B1 Errors :This counter is incremented each time a SM BIP error is detected on the Deframer input stream. <Help> This counter gives the number of BI… |
| 1.3.6.1.4.1.20044.29.4.3.152.1.3 | Columnpm1004mCntdfrmB1ErrCntErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the SM BIP error counter value is invalid on Port |
| 1.3.6.1.4.1.20044.29.4.3.152.1.4 | Columnpm1004mCntdfrmB1ErrCntOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a SM BIP error counter overload on Port |
| 1.3.6.1.4.1.20044.29.4.3.153 | Tablepm1004mCntdfrmTimCntTable | not-accessible | current | List of pm1004mCntdfrmTimCnt Article |
| 1.3.6.1.4.1.20044.29.4.3.153.1 | Rowpm1004mCntdfrmTimCntEntry | not-accessible | current | Row definition for the pm1004mCntdfrmTimCnt table |
| 1.3.6.1.4.1.20044.29.4.3.153.1.1 | Columnpm1004mCntdfrmTimCntIndex | read-only | current | Index definition for the pm1004mCntdfrmTimCnt table |
| 1.3.6.1.4.1.20044.29.4.3.153.1.2 | Columnpm1004mCntdfrmTimCntValuePortn | read-only | current | Line Timer Counter :This is the timing counter dedicated to the downstream deframer counters. It is incremented every 125 us. |
| 1.3.6.1.4.1.20044.29.4.3.153.1.3 | Columnpm1004mCntdfrmTimCntErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port |
| 1.3.6.1.4.1.20044.29.4.3.153.1.4 | Columnpm1004mCntdfrmTimCntOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port |
| 1.3.6.1.4.1.20044.29.4.259 | Scalarpm1004mCntCountersReset | read-write | current | Counters Reset:This OID resets and restarts all the counters |
| 1.3.6.1.4.1.20044.29.4.260 | Scalarpm1004mCntCountersStop | read-write | current | Counters stop:This OID stops all the counters |
| 1.3.6.1.4.1.20044.29.6 | Nodepm1004mcontrolsWrite | |||
| 1.3.6.1.4.1.20044.29.6.1 | Nodepm1004mCtrlOther | |||
| 1.3.6.1.4.1.20044.29.6.1.1 | Nodepm1004mCtrlconfMgnt1 | |||
| 1.3.6.1.4.1.20044.29.6.1.1.1 | Scalarpm1004mCtrlConf1Load1 | read-write | current | Load Configuration Tables Set Nb 1 :When set this OID enables loading from flash configuration1 into the PM. |
| 1.3.6.1.4.1.20044.29.6.1.1.2 | Scalarpm1004mCtrlConf2Load1 | read-write | current | Load Configuration Tables Set Nb 2 :When set this OID enables loading from flash configuration2 into the PM. |
| 1.3.6.1.4.1.20044.29.6.1.1.10 | Scalarpm1004mCtrlConf2Flash1 | read-write | current | Write Configuration Tables :This OID saves the current configuration of the PM as configuration2 in the flash. <Help> This control saves the customer configura… |
| 1.3.6.1.4.1.20044.29.6.1.1.14 | Scalarpm1004mCtrlConf2Clear1 | read-write | current | Clear Configuration Tables :This OID clears the configuration tables from configuration2 in the flash. <Help> This control restores the default configuration o… |
| 1.3.6.1.4.1.20044.29.6.1.4 | Nodepm1004mCtrlsynth4 | |||
| 1.3.6.1.4.1.20044.29.6.1.4.1 | Scalarpm1004mCtrlCorrelatOn | read-write | current | Enable Alarm Correlation :This OID enables the alarm correlation in the PM. |
| 1.3.6.1.4.1.20044.29.6.1.4.2 | Scalarpm1004mCtrlCorrelatOff | read-write | current | Disable Alarm Correlation :This OID disables the alarm correlation in the PM. |
| 1.3.6.1.4.1.20044.29.6.1.5 | Nodepm1004mCtrlswMgnt | |||
| 1.3.6.1.4.1.20044.29.6.1.5.2 | Scalarpm1004mCtrlColdReset | read-write | current | PM Cold Reset :This OID, when set, causes a cold reset of the PM. This reset is traffic affecting, and the configuration of PM is reloaded on start-up. <Help> … |
| 1.3.6.1.4.1.20044.29.6.1.5.3 | Scalarpm1004mCtrlWarmReset | read-write | current | PM Warm Reset :This OID, when set, causes a warm reset of the PM. This reset is not traffic affecting, and the configuration of PM remains unchanged. <Help> Th… |
| 1.3.6.1.4.1.20044.29.6.1.5.5 | Scalarpm1004mCtrlLoadSwBank1 | read-write | current | Set Software Nb 1 As Active :This OID, when set, loads the SW from bank1 into the PM. It must be followed by a reset. <Help> This controls selects the first SW… |
| 1.3.6.1.4.1.20044.29.6.1.5.6 | Scalarpm1004mCtrlLoadSwBank2 | read-write | current | Set Software Nb 2 As Active :This OID, when set, loads the SW from bank2 into the PM. It must be followed by a reset. <Help> This controls selects the second S… |
| 1.3.6.1.4.1.20044.29.6.1.6 | Nodepm1004mCtrlgwMgnt | |||
| 1.3.6.1.4.1.20044.29.6.1.6.1 | Scalarpm1004mCtrlCurrentGwReset | read-write | current | Active Gateware Reset :This OID, when set, resets the active gateware. It is traffic affecting. |
| 1.3.6.1.4.1.20044.29.6.1.6.5 | Scalarpm1004mCtrlLoadGwBank1 | read-write | current | Set Gateware Nb 1 As Active :This OID, when set, loads the GW from bank1 (Flash) into the PM. It is followed by an automatic gateware cold reset. <Help> This c… |
| 1.3.6.1.4.1.20044.29.6.1.6.6 | Scalarpm1004mCtrlLoadGwBank2 | read-write | current | Set Gateware Nb 2 As Active :This OID, when set, loads the GW from bank2 (Flash) into the PM. It is followed by an automatic gateware cold reset. |
| 1.3.6.1.4.1.20044.29.6.1.6.7 | Scalarpm1004mCtrlLoadGwBank3 | read-write | current | Set Gateware Nb 3 As Active :This OID, when set, loads the GW from bank3 (Flash) into the PM. It is followed by an automatic gateware cold reset. <Help> This c… |
| 1.3.6.1.4.1.20044.29.6.1.6.8 | Scalarpm1004mCtrlLoadGwBank4 | read-write | current | Set Gateware Nb 4 As Active :This OID, when set, loads the GW from bank4 (Flash) into the PM. It is followed by an automatic gateware cold reset. |
| 1.3.6.1.4.1.20044.29.6.1.192 | Nodepm1004mCtrlledTest | |||
| 1.3.6.1.4.1.20044.29.6.1.192.1 | Scalarpm1004mCtrlGreenLed | read-write | current | Green Leds Test :This OID switches on all the green Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to green |
| 1.3.6.1.4.1.20044.29.6.1.192.2 | Scalarpm1004mCtrlRedLed | read-write | current | Red Leds Test :This OID switches on all the red Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to red |
| 1.3.6.1.4.1.20044.29.6.1.192.3 | Scalarpm1004mCtrlLedOff | read-write | current | Leds Off :This OID switches off all the Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to OFF |
| 1.3.6.1.4.1.20044.29.6.1.193 | Nodepm1004mCtrlmoduleOosMode | |||
| 1.3.6.1.4.1.20044.29.6.1.193.1 | Scalarpm1004mCtrlModuleOosMode | read-write | current | PM Out Of Service :This OID sets the PM Out Of Service <Help> This control defines the service state of the complete module |
| 1.3.6.1.4.1.20044.29.6.1.197 | Nodepm1004mCtrlmaintenanceMode | |||
| 1.3.6.1.4.1.20044.29.6.1.197.1 | Scalarpm1004mCtrlMaintenanceMode | read-write | current | Module Maintenance Mode :This OID enables the maintenance mode on the PM. <Help> This control enables the maintenance mode on the PM. |
| 1.3.6.1.4.1.20044.29.6.1.198 | Nodepm1004mCtrldccEnable | |||
| 1.3.6.1.4.1.20044.29.6.1.198.1 | Scalarpm1004mCtrlDccEnable | read-write | current | DCC Enable :This OID enables the DCC mode on the PM <Help> This control enables the DCC mode on the PM |
| 1.3.6.1.4.1.20044.29.6.2 | Nodepm1004mCtrlClient | |||
| 1.3.6.1.4.1.20044.29.6.2.16 | Tablepm1004mCtrlaccessLoopTable | not-accessible | current | List of pm1004mCtrlaccessLoop Article |
| 1.3.6.1.4.1.20044.29.6.2.16.1 | Rowpm1004mCtrlaccessLoopEntry | not-accessible | current | Row definition for the pm1004mCtrlaccessLoop table |
| 1.3.6.1.4.1.20044.29.6.2.16.1.1 | Columnpm1004mCtrlaccessLoopIndex | read-only | current | Index definition for the pm1004mCtrlaccessLoop table |
| 1.3.6.1.4.1.20044.29.6.2.16.1.2 | Columnpm1004mCtrlaccessLoopPortn | read-write | current | Client Facility Loopback :This OID operates a Client Facility Loopback, looping client input signal on the client output port. The loop is located on the clien… |
| 1.3.6.1.4.1.20044.29.6.2.18 | Tablepm1004mCtrlportOosModeTable | not-accessible | current | List of pm1004mCtrlportOosMode Article |
| 1.3.6.1.4.1.20044.29.6.2.18.1 | Rowpm1004mCtrlportOosModeEntry | not-accessible | current | Row definition for the pm1004mCtrlportOosMode table |
| 1.3.6.1.4.1.20044.29.6.2.18.1.1 | Columnpm1004mCtrlportOosModeIndex | read-only | current | Index definition for the pm1004mCtrlportOosMode table |
| 1.3.6.1.4.1.20044.29.6.2.18.1.2 | Columnpm1004mCtrlportOosModePortn | read-write | current | Client Port Out Of Service :This OID sets the client port Out Of Service <Help> This controls defines the service state of the client port |
| 1.3.6.1.4.1.20044.29.6.2.19 | Tablepm1004mCtrlsfpOnCtrlTable | not-accessible | current | List of pm1004mCtrlsfpOnCtrl Article |
| 1.3.6.1.4.1.20044.29.6.2.19.1 | Rowpm1004mCtrlsfpOnCtrlEntry | not-accessible | current | Row definition for the pm1004mCtrlsfpOnCtrl table |
| 1.3.6.1.4.1.20044.29.6.2.19.1.1 | Columnpm1004mCtrlsfpOnCtrlIndex | read-only | current | Index definition for the pm1004mCtrlsfpOnCtrl table |
| 1.3.6.1.4.1.20044.29.6.2.19.1.2 | Columnpm1004mCtrlsfpOnCtrlPortn | read-write | current | Client SFP Optical Laser ON :This OID switches on the SFP. |
| 1.3.6.1.4.1.20044.29.6.2.20 | Tablepm1004mCtrlsfpOffCtrlTable | not-accessible | current | List of pm1004mCtrlsfpOffCtrl Article |
| 1.3.6.1.4.1.20044.29.6.2.20.1 | Rowpm1004mCtrlsfpOffCtrlEntry | not-accessible | current | Row definition for the pm1004mCtrlsfpOffCtrl table |
| 1.3.6.1.4.1.20044.29.6.2.20.1.1 | Columnpm1004mCtrlsfpOffCtrlIndex | read-only | current | Index definition for the pm1004mCtrlsfpOffCtrl table |
| 1.3.6.1.4.1.20044.29.6.2.20.1.2 | Columnpm1004mCtrlsfpOffCtrlPortn | read-write | current | Client SFP Laser Shutdown :This OID switches off the SFP. <Help> This control defines the laser state of the client transceiver |
| 1.3.6.1.4.1.20044.29.6.2.21 | Tablepm1004mCtrlcsfUpInsTable | not-accessible | current | List of pm1004mCtrlcsfUpIns Article |
| 1.3.6.1.4.1.20044.29.6.2.21.1 | Rowpm1004mCtrlcsfUpInsEntry | not-accessible | current | Row definition for the pm1004mCtrlcsfUpIns table |
| 1.3.6.1.4.1.20044.29.6.2.21.1.1 | Columnpm1004mCtrlcsfUpInsIndex | read-only | current | Index definition for the pm1004mCtrlcsfUpIns table |
| 1.3.6.1.4.1.20044.29.6.2.21.1.2 | Columnpm1004mCtrlcsfUpInsPortn | read-write | current | Client Signal Fail Insertion :This OID, when set, inserts a client signal fail in the upstream client Port. <Help> This control inserts a Client Signal Fail fo… |
| 1.3.6.1.4.1.20044.29.6.2.22 | Tablepm1004mCtrlcaisDwInsTable | not-accessible | current | List of pm1004mCtrlcaisDwIns Article |
| 1.3.6.1.4.1.20044.29.6.2.22.1 | Rowpm1004mCtrlcaisDwInsEntry | not-accessible | current | Row definition for the pm1004mCtrlcaisDwIns table |
| 1.3.6.1.4.1.20044.29.6.2.22.1.1 | Columnpm1004mCtrlcaisDwInsIndex | read-only | current | Index definition for the pm1004mCtrlcaisDwIns table |
| 1.3.6.1.4.1.20044.29.6.2.22.1.2 | Columnpm1004mCtrlcaisDwInsPortn | read-write | current | Client AIS Insertion :This OID, when set, inserts a client AIS on the downstream client Port. <Help> This control inserts a Client AIS for the client port |
| 1.3.6.1.4.1.20044.29.6.2.26 | Tablepm1004mCtrlclientAccessTermLoopTable | not-accessible | current | List of pm1004mCtrlclientAccessTermLoop Article |
| 1.3.6.1.4.1.20044.29.6.2.26.1 | Rowpm1004mCtrlclientAccessTermLoopEntry | not-accessible | current | Row definition for the pm1004mCtrlclientAccessTermLoop table |
| 1.3.6.1.4.1.20044.29.6.2.26.1.1 | Columnpm1004mCtrlclientAccessTermLoopIndex | read-only | current | Index definition for the pm1004mCtrlclientAccessTermLoop table |
| 1.3.6.1.4.1.20044.29.6.2.26.1.2 | Columnpm1004mCtrlclientAccessTermLoopPortn | read-write | current | Client Terminal Loopback :This OID operates a Client Terminal Loopback, looping client input signal on the client output port. The loop is located on the line … |
| 1.3.6.1.4.1.20044.29.6.2.35 | Tablepm1004mCtrlresetCount15PortTable | not-accessible | current | List of pm1004mCtrlresetCount15Port Article |
| 1.3.6.1.4.1.20044.29.6.2.35.1 | Rowpm1004mCtrlresetCount15PortEntry | not-accessible | current | Row definition for the pm1004mCtrlresetCount15Port table |
| 1.3.6.1.4.1.20044.29.6.2.35.1.1 | Columnpm1004mCtrlresetCount15PortIndex | read-only | current | Index definition for the pm1004mCtrlresetCount15Port table |
| 1.3.6.1.4.1.20044.29.6.2.35.1.2 | Columnpm1004mCtrlclientResetAllPerfCount15Portn | read-write | current | Client 15-min Counters Reset :This OID resets all the current 15-min Counters on the client port |
| 1.3.6.1.4.1.20044.29.6.2.36 | Tablepm1004mCtrlresetCount24PortTable | not-accessible | current | List of pm1004mCtrlresetCount24Port Article |
| 1.3.6.1.4.1.20044.29.6.2.36.1 | Rowpm1004mCtrlresetCount24PortEntry | not-accessible | current | Row definition for the pm1004mCtrlresetCount24Port table |
| 1.3.6.1.4.1.20044.29.6.2.36.1.1 | Columnpm1004mCtrlresetCount24PortIndex | read-only | current | Index definition for the pm1004mCtrlresetCount24Port table |
| 1.3.6.1.4.1.20044.29.6.2.36.1.2 | Columnpm1004mCtrlclientResetAllPerfCount24Portn | read-write | current | Client 24-hours Counters Reset :This OID resets all the current 24-hours Counters on the client port |
| 1.3.6.1.4.1.20044.29.6.3 | Nodepm1004mCtrlLine | |||
| 1.3.6.1.4.1.20044.29.6.3.64 | Nodepm1004mCtrlcommAccessLoop | |||
| 1.3.6.1.4.1.20044.29.6.3.64.1 | Scalarpm1004mCtrlCommAccessloop | read-write | deprecated | PM Full Access Loop Mode :This OID, when set, puts the module in common access loop back, looping the 10 Gb/s output signal on the 10 Gb/s input. |
| 1.3.6.1.4.1.20044.29.6.3.66 | Nodepm1004mCtrllineLoop | |||
| 1.3.6.1.4.1.20044.29.6.3.66.1 | Scalarpm1004mCtrlLineLoop | read-write | deprecated | PM Line Loop Mode :This OID, when set at '1' puts the module in line loopback mode, looping the received 10 Gb/s signal on the transmit 10 Gb/s output. The Ups… |
| 1.3.6.1.4.1.20044.29.6.3.67 | Nodepm1004mCtrlmsAis | |||
| 1.3.6.1.4.1.20044.29.6.3.67.1 | Scalarpm1004mCtrlMsAis | read-write | current | Insert MS-AIS/L-AIS On Line Output :This OID, when set, inserts an MS-AIS/L-AIS in the outgoing STM-64/OC-192 signal. |
| 1.3.6.1.4.1.20044.29.6.3.73 | Nodepm1004mCtrlProtMgnt | |||
| 1.3.6.1.4.1.20044.29.6.3.73.1 | Scalarpm1004mCtrlLineNumber | read-write | current | Active Line Number : This OID sets the active line number |
| 1.3.6.1.4.1.20044.29.6.3.73.2 | Scalarpm1004mCtrlProtMode | read-write | current | Line Switch Mode (Auto Or Manual) :This bit selects the manual (1) or automatic (0) switch method <Help> This control defines the protection switch mode on the… |
| 1.3.6.1.4.1.20044.29.6.3.74 | Tablepm1004mCtrllineOosModeTable | not-accessible | current | List of pm1004mCtrllineOosMode Article |
| 1.3.6.1.4.1.20044.29.6.3.74.1 | Rowpm1004mCtrllineOosModeEntry | not-accessible | current | Row definition for the pm1004mCtrllineOosMode table |
| 1.3.6.1.4.1.20044.29.6.3.74.1.1 | Columnpm1004mCtrllineOosModeIndex | read-only | current | Index definition for the pm1004mCtrllineOosMode table |
| 1.3.6.1.4.1.20044.29.6.3.74.1.2 | Columnpm1004mCtrllineOosModePortn | read-write | current | Line Port Out Of Service :This OID sets the line port Out Of Service <Help> This control defines the service state of the line port |
| 1.3.6.1.4.1.20044.29.6.3.86 | Tablepm1004mCtrllineResetCount15LineTable | not-accessible | current | List of pm1004mCtrllineResetCount15Line Article |
| 1.3.6.1.4.1.20044.29.6.3.86.1 | Rowpm1004mCtrllineResetCount15LineEntry | not-accessible | current | Row definition for the pm1004mCtrllineResetCount15Line table |
| 1.3.6.1.4.1.20044.29.6.3.86.1.1 | Columnpm1004mCtrllineResetCount15LineIndex | read-only | current | Index definition for the pm1004mCtrllineResetCount15Line table |
| 1.3.6.1.4.1.20044.29.6.3.86.1.2 | Columnpm1004mCtrlresetAllPerfCount15Portn | read-write | current | Line 15-min Counters Reset :This OID resets all the current 15-min Counters on the client port |
| 1.3.6.1.4.1.20044.29.6.3.87 | Tablepm1004mCtrllineResetCount24LineTable | not-accessible | current | List of pm1004mCtrllineResetCount24Line Article |
| 1.3.6.1.4.1.20044.29.6.3.87.1 | Rowpm1004mCtrllineResetCount24LineEntry | not-accessible | current | Row definition for the pm1004mCtrllineResetCount24Line table |
| 1.3.6.1.4.1.20044.29.6.3.87.1.1 | Columnpm1004mCtrllineResetCount24LineIndex | read-only | current | Index definition for the pm1004mCtrllineResetCount24Line table |
| 1.3.6.1.4.1.20044.29.6.3.87.1.2 | Columnpm1004mCtrlresetAllPerfCount24Portn | read-write | current | Line 24-hours Counters Reset :This OID resets all the current 24-hours Counters on the client port |
| 1.3.6.1.4.1.20044.29.6.3.208 | Tablepm1004mCtrlxfpOnoffTable | not-accessible | current | List of pm1004mCtrlxfpOnoff Article |
| 1.3.6.1.4.1.20044.29.6.3.208.1 | Rowpm1004mCtrlxfpOnoffEntry | not-accessible | current | Row definition for the pm1004mCtrlxfpOnoff table |
| 1.3.6.1.4.1.20044.29.6.3.208.1.1 | Columnpm1004mCtrlxfpOnoffIndex | read-only | current | Index definition for the pm1004mCtrlxfpOnoff table |
| 1.3.6.1.4.1.20044.29.6.3.208.1.2 | Columnpm1004mCtrlxfpOnoffPortn | read-write | current | Line Optical Laser Shutdown :This OID switches off the XFP or the OTX <Help> This control defines the laser state of the line transceiver |
| 1.3.6.1.4.1.20044.29.6.3.209 | Tablepm1004mCtrlxfpLineLoopTable | not-accessible | current | List of pm1004mCtrlxfpLineLoop Article |
| 1.3.6.1.4.1.20044.29.6.3.209.1 | Rowpm1004mCtrlxfpLineLoopEntry | not-accessible | current | Row definition for the pm1004mCtrlxfpLineLoop table |
| 1.3.6.1.4.1.20044.29.6.3.209.1.1 | Columnpm1004mCtrlxfpLineLoopIndex | read-only | current | Index definition for the pm1004mCtrlxfpLineLoop table |
| 1.3.6.1.4.1.20044.29.6.3.209.1.2 | Columnpm1004mCtrlxfpLineLoopPortn | read-write | current | Line Facility Loopback :This OID operates a Line Facility Loopback, looping line input signal on the line output port. The loop is located on the line transcei… |
| 1.3.6.1.4.1.20044.29.6.3.210 | Tablepm1004mCtrlxfpXfiLoopTable | not-accessible | current | List of pm1004mCtrlxfpXfiLoop Article |
| 1.3.6.1.4.1.20044.29.6.3.210.1 | Rowpm1004mCtrlxfpXfiLoopEntry | not-accessible | current | Row definition for the pm1004mCtrlxfpXfiLoop table |
| 1.3.6.1.4.1.20044.29.6.3.210.1.1 | Columnpm1004mCtrlxfpXfiLoopIndex | read-only | current | Index definition for the pm1004mCtrlxfpXfiLoop table |
| 1.3.6.1.4.1.20044.29.6.3.210.1.2 | Columnpm1004mCtrlxfpXfiLoopPortn | read-write | current | Line Terminal Loopback :This OID operates a Line Terminal Loopback, looping line input signal on the line output port. The loop is located on all client transc… |
| 1.3.6.1.4.1.20044.29.6.3.212 | Tablepm1004mCtrllineTunableChannelTable | not-accessible | current | List of pm1004mCtrllineTunableChannel Article |
| 1.3.6.1.4.1.20044.29.6.3.212.1 | Rowpm1004mCtrllineTunableChannelEntry | not-accessible | current | Row definition for the pm1004mCtrllineTunableChannel table |
| 1.3.6.1.4.1.20044.29.6.3.212.1.1 | Columnpm1004mCtrllineTunableChannelIndex | read-only | current | Index definition for the pm1004mCtrllineTunableChannel table |
| 1.3.6.1.4.1.20044.29.6.3.212.1.2 | Columnpm1004mCtrllineTunableChannelPortn | read-write | current | ITU Channel :This OID selects the ITU channel of the Line OTX TLH Laser <Help> This control defines the ITU channel of the Line OTX TLH Laser |
| 1.3.6.1.4.1.20044.29.6.3.213 | Tablepm1004mCtrllinePhotodiodeModeTable | not-accessible | current | List of pm1004mCtrllinePhotodiodeMode Article |
| 1.3.6.1.4.1.20044.29.6.3.213.1 | Rowpm1004mCtrllinePhotodiodeModeEntry | not-accessible | current | Row definition for the pm1004mCtrllinePhotodiodeMode table |
| 1.3.6.1.4.1.20044.29.6.3.213.1.1 | Columnpm1004mCtrllinePhotodiodeModeIndex | read-only | current | Index definition for the pm1004mCtrllinePhotodiodeMode table |
| 1.3.6.1.4.1.20044.29.6.3.213.1.2 | Columnpm1004mCtrllinePhotodiodeModePortn | read-write | current | OTX TLH Rx Sens. Mode :This OID defines the Rx sensiblity mode of the Line OTX TLH <Help> This control defines the receiver sensibility mode of the Line OTX TL… |
| 1.3.6.1.4.1.20044.29.6.3.214 | Tablepm1004mCtrllinePhotodiodeValueTable | not-accessible | current | List of pm1004mCtrllinePhotodiodeValue Article |
| 1.3.6.1.4.1.20044.29.6.3.214.1 | Rowpm1004mCtrllinePhotodiodeValueEntry | not-accessible | current | Row definition for the pm1004mCtrllinePhotodiodeValue table |
| 1.3.6.1.4.1.20044.29.6.3.214.1.1 | Columnpm1004mCtrllinePhotodiodeValueIndex | read-only | current | Index definition for the pm1004mCtrllinePhotodiodeValue table |
| 1.3.6.1.4.1.20044.29.6.3.214.1.2 | Columnpm1004mCtrllinePhotodiodeValuePortn | read-write | current | OTX TLH Rx Sensibility :This OID sets the Rx sensibility of the Line OTX TLH (custom mode only) <Help> This control defines the receiver sensibility value (onl… |
| 1.3.6.1.4.1.20044.29.6.3.215 | Tablepm1004mCtrllinePowerLaserTable | not-accessible | current | List of pm1004mCtrllinePowerLaser Article |
| 1.3.6.1.4.1.20044.29.6.3.215.1 | Rowpm1004mCtrllinePowerLaserEntry | not-accessible | current | Row definition for the pm1004mCtrllinePowerLaser table |
| 1.3.6.1.4.1.20044.29.6.3.215.1.1 | Columnpm1004mCtrllinePowerLaserIndex | read-only | current | Index definition for the pm1004mCtrllinePowerLaser table |
| 1.3.6.1.4.1.20044.29.6.3.215.1.2 | Columnpm1004mCtrllinePowerLaserPortn | read-write | current | Line Laser Output Power [3-5] :This OID sets the output power value on the laser of the Line OTX TLH (AV=Power*10+158) (Unit = dBm) <Help> This control defines… |
| 1.3.6.1.4.1.20044.29.7 | Nodepm1004mri | |||
| 1.3.6.1.4.1.20044.29.7.1 | Nodepm1004mriTable | |||
| 1.3.6.1.4.1.20044.29.7.1.1 | Tablepm1004mRinvSfpTable | not-accessible | current | List of the SFPs on the selected module |
| 1.3.6.1.4.1.20044.29.7.1.1.1 | Rowpm1004mRinvSfpEntry | not-accessible | current | Row definition for the SFP table |
| 1.3.6.1.4.1.20044.29.7.1.1.1.1 | Columnpm1004mRinvSfpIndex | read-only | current | Index for SFP table |
| 1.3.6.1.4.1.20044.29.7.1.1.1.2 | Columnpm1004mRinvsfp | read-only | current | Inventory for the SFP: This OID contains the inventory for the SFP |
| 1.3.6.1.4.1.20044.29.7.1.2 | Tablepm1004mRinvLineTable | not-accessible | current | List of the XFPs on the selected module |
| 1.3.6.1.4.1.20044.29.7.1.2.1 | Rowpm1004mRinvLineEntry | not-accessible | current | Row definition for the XFP table |
| 1.3.6.1.4.1.20044.29.7.1.2.1.1 | Columnpm1004mRinvLineIndex | read-only | current | Index for XFP table |
| 1.3.6.1.4.1.20044.29.7.1.2.1.2 | Columnpm1004mRinvxfpLine | read-only | current | Inventory for the XFP: This OID contains the inventory for the XFP |
| 1.3.6.1.4.1.20044.29.7.2 | Scalarpm1004mRinvReloadInventory | read-write | current | Reload the inventory: This OID triggers an inventory reload. |
| 1.3.6.1.4.1.20044.29.7.3 | Scalarpm1004mRinvHwPlatform | read-only | current | HW platform description: This OID contains the description of the Hardware platform. |
| 1.3.6.1.4.1.20044.29.7.4 | Scalarpm1004mRinvModulePlatform | read-only | current | Module platform description: This OID contains the description of the Module. |
| 1.3.6.1.4.1.20044.29.7.5 | Scalarpm1004mRinvSwPlatform | read-only | current | SW platform description: This OID contains the description of the Software platform. |
| 1.3.6.1.4.1.20044.29.7.6 | Scalarpm1004mRinvGwPlatform | read-only | current | GW platform desciption: This OID contains the description of the Gateware platform. |
| 1.3.6.1.4.1.20044.29.8 | Nodepm1004mdownload | |||
| 1.3.6.1.4.1.20044.29.8.1 | Nodepm1004mDwlOther | |||
| 1.3.6.1.4.1.20044.29.8.1.0 | Nodepm1004mDwlrestartProcess | |||
| 1.3.6.1.4.1.20044.29.8.1.0.1 | Scalarpm1004mDwlWarmRestartProcessed | read-only | current | Warm Restart :This OID indicates that the module last restart was a Warm RESTART |
| 1.3.6.1.4.1.20044.29.8.1.0.2 | Scalarpm1004mDwlColdRestartProcessed | read-only | current | Cold Restart :This OID indicates that the module last restart was a Cold RESTART |
| 1.3.6.1.4.1.20044.29.8.1.1 | Nodepm1004mDwlswBanksUsed | |||
| 1.3.6.1.4.1.20044.29.8.1.1.1 | Scalarpm1004mDwlSwBank1Used | read-only | current | SW bank 1 active :This OID indicates the module is working on SW bank 1 <Help> This status indicates if the SW bank 1 is active or standby |
| 1.3.6.1.4.1.20044.29.8.1.1.2 | Scalarpm1004mDwlSwBank2Used | read-only | current | SW bank 2 active :This OID indicates the module is working on SW bank 2 <Help> This status indicates if the SW bank 2 is active or standby |
| 1.3.6.1.4.1.20044.29.8.1.1.5 | Scalarpm1004mDwlSwBank1Notempty | read-only | current | SW bank 1 loaded :This OID indicates a software is loaded in SW bank 1 <Help> This status indicates if the SW bank 1 contains SW package |
| 1.3.6.1.4.1.20044.29.8.1.1.6 | Scalarpm1004mDwlSwBank2Notempty | read-only | current | SW bank 2 loaded :This OID indicates a software is loaded in SW bank 2 <Help> This status indicates if the SW bank 2 contains SW package |
| 1.3.6.1.4.1.20044.29.8.1.2 | Nodepm1004mDwlgwBanksUsed | |||
| 1.3.6.1.4.1.20044.29.8.1.2.1 | Scalarpm1004mDwlGwBank1Used | read-only | current | GW bank 1 active :This OID indicates the module is working on GW bank 1 <Help> This status indicates if the GW bank 1 is active or standby |
| 1.3.6.1.4.1.20044.29.8.1.2.2 | Scalarpm1004mDwlGwBank2Used | read-only | current | GW bank 2 active :This OID indicates the module is working on GW bank 2 |
| 1.3.6.1.4.1.20044.29.8.1.2.3 | Scalarpm1004mDwlGwBank3Used | read-only | current | GW bank 3 active :This OID indicates the module is working on GW bank 3 <Help> This status indicates if the GW bank 3 is active or standby |
| 1.3.6.1.4.1.20044.29.8.1.2.4 | Scalarpm1004mDwlGwBank4Used | read-only | current | GW bank 4 active :This OID indicates the module is working on GW bank 4 |
| 1.3.6.1.4.1.20044.29.8.1.2.5 | Scalarpm1004mDwlGwBank1Notempty | read-only | current | GW bank 1 loaded :This OID indicates a gateware is loaded in GW bank 1 <Help> This status indicates if the GW bank 1 contains GW package |
| 1.3.6.1.4.1.20044.29.8.1.2.6 | Scalarpm1004mDwlGwBank2Notempty | read-only | current | GW bank 2 loaded :This OID indicates a gateware is loaded in GW bank 2 |
| 1.3.6.1.4.1.20044.29.8.1.2.7 | Scalarpm1004mDwlGwBank3Notempty | read-only | current | GW bank 3 loaded :This OID indicates a gateware is loaded in GW bank 3 <Help> This status indicates if the GW bank 3 contains GW package |
| 1.3.6.1.4.1.20044.29.8.1.2.8 | Scalarpm1004mDwlGwBank4Notempty | read-only | current | GW bank 4 loaded :This OID indicates a gateware is loaded in GW bank 4 |
| 1.3.6.1.4.1.20044.29.8.2 | Nodepm1004mDwlClient | |||
| 1.3.6.1.4.1.20044.29.8.3 | Nodepm1004mDwlLine | |||
| 1.3.6.1.4.1.20044.29.9 | Nodepm1004mConfig | |||
| 1.3.6.1.4.1.20044.29.9.1 | Nodepm1004mCfgAccessCAisCsf | |||
| 1.3.6.1.4.1.20044.29.9.1.1 | Tablepm1004mCfgClientcaiscsfTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.29.9.1.1.1 | Rowpm1004mCfgClientcaiscsfEntry | not-accessible | current | Row definition for the accessCAisCsf table |
| 1.3.6.1.4.1.20044.29.9.1.1.1.1 | Columnpm1004mCfgClientcaiscsfIndex | read-only | current | Index definition for the clientcaiscsf table |
| 1.3.6.1.4.1.20044.29.9.1.1.1.3 | Columnpm1004mCfgCAisModePortn | read-write | current | CAIS mode on Client Port :This register enables/disables port laser shutdown on CAIS insertion condition |
| 1.3.6.1.4.1.20044.29.9.1.1.1.9 | Columnpm1004mCfgUpAccessioAlmPortn | read-write | current | CSF contributors on Client Port :This register configures the contributors to upstream CSF insertion on the port. |
| 1.3.6.1.4.1.20044.29.9.1.1.1.10 | Columnpm1004mCfgUpMapperDeAlmPortn | read-write | current | CSF contributors on Client Port :This register configures the contributors to upstream CSF insertion on the port. |
| 1.3.6.1.4.1.20044.29.9.1.1.1.11 | Columnpm1004mCfgUpAccessioSdhAlmPortn | read-write | current | CSF contributors on Client Port :This register selects the contributors of SDH register to upstream CAIS/CSF on Port |
| 1.3.6.1.4.1.20044.29.9.1.1.1.17 | Columnpm1004mCfgDownAccessioAlmPortn | read-write | current | CAIS contributors on Client Port :This register configures the contributors to downstream CAIS insertion on port. |
| 1.3.6.1.4.1.20044.29.9.1.1.1.18 | Columnpm1004mCfgDownMapperDeAlmPortn | read-write | current | CAIS contributors on Client Port :This register configures the contributors to downstream CAIS insertion on port. |
| 1.3.6.1.4.1.20044.29.9.1.1.1.19 | Columnpm1004mCfgDownDfrmAlmPortn | read-write | current | CAIS contributors on Client Port :This register configures the contributors to downstream CAIS insertion on port. |
| 1.3.6.1.4.1.20044.29.9.1.1.1.20 | Columnpm1004mCfgDownLineSyncAlarmsPortn | read-write | deprecated | CAIS contributors on Client Port :This register configures the contributors to downstream CAIS insertion on port. |
| 1.3.6.1.4.1.20044.29.9.1.1.1.21 | Columnpm1004mCfgDownAccessioSdhAlmPortn | read-write | current | CAIS contributors on Client Port :This register selects the contributors of SDH register to downstream CAIS/CSF on Port |
| 1.3.6.1.4.1.20044.29.9.2 | Nodepm1004mCfgStartup | |||
| 1.3.6.1.4.1.20044.29.9.2.1 | Tablepm1004mCfgClientStartupTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.29.9.2.1.1 | Rowpm1004mCfgClientStartupEntry | not-accessible | current | Row definition for the startup table |
| 1.3.6.1.4.1.20044.29.9.2.1.1.1 | Columnpm1004mCfgClientStartupIndex | read-only | current | Index definition for the clientStartup table |
| 1.3.6.1.4.1.20044.29.9.2.1.1.3 | Columnpm1004mCfgSystConfPortPortn | read-write | current | Default Settings on Client Port :This register configures the default initialisation settings on the port. |
| 1.3.6.1.4.1.20044.29.9.2.1.1.4 | Columnpm1004mCfgNetConfPortPortn | read-write | current | Default Protocol on Client Port :This register configures the default initialisation protocol on the port. |
| 1.3.6.1.4.1.20044.29.9.2.2 | Nodepm1004mtablelineStartup | |||
| 1.3.6.1.4.1.20044.29.9.2.2.2 | Scalarpm1004mCfgsystConfLine1 | read-write | current | Default Settings on Line 1 :This register configures the default initialisation settings on Line port 1. |
| 1.3.6.1.4.1.20044.29.9.2.2.5 | Scalarpm1004mCfglineOptions1 | read-write | current | Default Options on Active Line Port :This register configures the default options on the active line port |
| 1.3.6.1.4.1.20044.29.9.2.2.6 | Scalarpm1004mCfgsystConfLine2 | read-write | current | Default Settings on Line 2 :This register configures the default initialisation settings on Line port 2. |
| 1.3.6.1.4.1.20044.29.9.2.2.7 | Scalarpm1004mCfglineSelection | read-write | current | Default Settings of active line :This register configures the start up active line. |
| 1.3.6.1.4.1.20044.29.9.2.3 | Tablepm1004mCfgXfpTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.29.9.2.3.1 | Rowpm1004mCfgXfpEntry | not-accessible | current | Row definition for the startup table |
| 1.3.6.1.4.1.20044.29.9.2.3.1.1 | Columnpm1004mCfgXfpIndex | read-only | current | Index definition for the xfp table |
| 1.3.6.1.4.1.20044.29.9.2.3.1.3 | Columnpm1004mCfgSystConfXfpPortn | read-write | current | Default settings on XFP Port :This register configures the default initialisation settings on XFP port. |
| 1.3.6.1.4.1.20044.29.9.2.3.1.4 | Columnpm1004mCfgDataRateConfXfpPortn | read-write | deprecated | :Reserved |
| 1.3.6.1.4.1.20044.29.9.3 | Nodepm1004mCfgLabels | |||
| 1.3.6.1.4.1.20044.29.9.3.1 | Tablepm1004mCfgLabelclientTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.29.9.3.1.1 | Rowpm1004mCfgLabelclientEntry | not-accessible | current | Row definition for the labels table |
| 1.3.6.1.4.1.20044.29.9.3.1.1.1 | Columnpm1004mCfgLabelclientIndex | read-only | current | Index definition for the labelclient table |
| 1.3.6.1.4.1.20044.29.9.3.1.1.3 | Columnpm1004mCfgLabelclientPortn | read-write | current | Default settings on the label of the Ports :These registers configures the default initialisation settings of the labels of the ports. |
| 1.3.6.1.4.1.20044.29.9.3.2 | Tablepm1004mCfgLabellineTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.29.9.3.2.1 | Rowpm1004mCfgLabellineEntry | not-accessible | current | Row definition for the labels table |
| 1.3.6.1.4.1.20044.29.9.3.2.1.1 | Columnpm1004mCfgLabellineIndex | read-only | current | Index definition for the labelline table |
| 1.3.6.1.4.1.20044.29.9.3.2.1.3 | Columnpm1004mCfgLabellinePortn | read-write | current | Default settings on the label of the lines :These registers configures the default initialisation settings of the labels of the lines. |
| 1.3.6.1.4.1.20044.29.9.4 | Nodepm1004mCfgModPerfConfig | |||
| 1.3.6.1.4.1.20044.29.9.4.1 | Nodepm1004mtablemodPerfConfig | |||
| 1.3.6.1.4.1.20044.29.9.4.1.2 | Scalarpm1004mCfgperfMode | read-write | current | SONET or SDH monitoring mode :This OID defines the line monitoring mode (SONET or SDH mode) |
| 1.3.6.1.4.1.20044.29.9.5 | Nodepm1004mCfgJ0Client | |||
| 1.3.6.1.4.1.20044.29.9.5.1 | Tablepm1004mCfgEmptyTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.29.9.5.1.1 | Rowpm1004mCfgEmptyEntry | not-accessible | current | Row definition for the j0Client table |
| 1.3.6.1.4.1.20044.29.9.5.1.1.1 | Columnpm1004mCfgEmptyIndex | read-only | current | Index definition for the empty table |
| 1.3.6.1.4.1.20044.29.9.5.1.1.3 | Columnpm1004mCfgClientExpectJ0SetupPortn | read-write | current | Expected Trace Identifier mode :This register configures the Expected Trace Identifier Mode (single byte, 16 bytes with CRC7, 64 bytes with CRC7 or 64 bytes wi… |
| 1.3.6.1.4.1.20044.29.9.6 | Nodepm1004mCfgStartuptlh | |||
| 1.3.6.1.4.1.20044.29.9.6.1 | Tablepm1004mCfgOtxtlhTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.29.9.6.1.1 | Rowpm1004mCfgOtxtlhEntry | not-accessible | current | Row definition for the startuptlh table |
| 1.3.6.1.4.1.20044.29.9.6.1.1.1 | Columnpm1004mCfgOtxtlhIndex | read-only | current | Index definition for the otxtlh table |
| 1.3.6.1.4.1.20044.29.9.6.1.1.3 | Columnpm1004mCfgNuPortn | read-write | deprecated | : |
| 1.3.6.1.4.1.20044.29.9.6.1.1.4 | Columnpm1004mCfgLineDitherRatePortn | read-write | current | Default Line OTX TLH FM amplitude :This register configures the start-up width of the frequency modulation of the Line OTX TLH |
| 1.3.6.1.4.1.20044.29.9.6.1.1.5 | Columnpm1004mCfgLineDitherFhzPortn | read-write | current | Default Line OTX TLH FM frequency :This register configures the start-up frequency of the frequency modulation of the Line OTX TLH |
| 1.3.6.1.4.1.20044.29.9.6.1.1.6 | Columnpm1004mCfgLinePwrLaserPortn | read-write | current | Defaut Line OTX TLH output Power :This register configures the start-up output power of the Line OTX TLH (Unit = dBm) |
| 1.3.6.1.4.1.20044.29.9.6.1.1.7 | Columnpm1004mCfgLineFCurrentPortn | read-write | current | Default Line OTX TLH Channel :This register configures the start-up laser channel of the Line OTX TLH |
| 1.3.6.1.4.1.20044.29.9.6.1.1.8 | Columnpm1004mCfgLineGridCurrentPortn | read-write | current | Default Line OTX TLH Grid :This register configures the start-up laser grid of the Line OTX TLH |
| 1.3.6.1.4.1.20044.29.9.6.1.1.9 | Columnpm1004mCfgFPortn | read-write | current | Default Line OTX TLH lowest Freq :This register configures the start-up lowest frequency supported on the Line OTX TLH |
| 1.3.6.1.4.1.20044.29.9.6.1.1.10 | Columnpm1004mCfgReservedPortn | read-write | deprecated | : |
| 1.3.6.1.4.1.20044.29.9.6.1.1.11 | Columnpm1004mCfgLinePhotodiodeModePortn | read-write | current | Default Line OTX TLH APD mode :This register configures the start-up APD mode of the Line OTX TLH |
| 1.3.6.1.4.1.20044.29.9.6.1.1.12 | Columnpm1004mCfgLinePhotodiodeValuePortn | read-write | current | Default Line OTX TLH APD atten. :This register configures the start-up APD attenuation on the Line OTX TLH |
| 1.3.6.1.4.1.20044.29.9.7 | Nodepm1004mCfgStartuptablefive | |||
| 1.3.6.1.4.1.20044.29.9.7.1 | Tablepm1004mCfgOtxtlhcapabilitiesTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.29.9.7.1.1 | Rowpm1004mCfgOtxtlhcapabilitiesEntry | not-accessible | current | Row definition for the startuptablefive table |
| 1.3.6.1.4.1.20044.29.9.7.1.1.1 | Columnpm1004mCfgOtxtlhcapabilitiesIndex | read-only | current | Index definition for the otxtlhcapabilities table |
| 1.3.6.1.4.1.20044.29.9.7.1.1.3 | Columnpm1004mCfgComponentTypePortn | read-only | current | Component parameters :This OID defines the component parameters |
| 1.3.6.1.4.1.20044.29.9.7.1.1.4 | Columnpm1004mCfgMiscellaneousPortn | read-only | current | Miscellaneous default settings :This OID defines the miscellaneous parameters |
| 1.3.6.1.4.1.20044.29.9.7.1.1.5 | Columnpm1004mCfgFirstChannelPortn | read-only | current | Number of the first channel of the component :This OID defines the first channel number of the PM |
| 1.3.6.1.4.1.20044.29.9.7.1.1.6 | Columnpm1004mCfgLastChannelPortn | read-only | current | Number of the last channel of the component :This OID defines the last channel number of the PM |
| 1.3.6.1.4.1.20044.29.9.7.1.1.7 | Columnpm1004mCfgGridPortn | read-only | current | Grid value of the component :This OID defines the grid of the PM |
| 1.3.6.1.4.1.20044.29.9.257 | Scalarpm1004mCfgWriteConfiguration | read-write | current | Write configuration to module:This OID writes the complete configuration to the module |
| 1.3.6.1.4.1.20044.29.10 | Nodepm1004mtraps | |||
| 1.3.6.1.4.1.20044.29.10.2 | Scalarpm1004mtrapPortNumber | read-only | current | Last port which generates a trap |
| 1.3.6.1.4.1.20044.29.10.3 | Scalarpm1004mtrapLineNumber | read-only | current | Last Line which generates a trap |
| 1.3.6.1.4.1.20044.29.10.4 | Scalarpm1004mtrapBoardNumber | read-only | current | Last module which generates a trap |
| 1.3.6.1.4.1.20044.29.10.30 | Notificationpm1004mLineTrapNotUrgentGoesOn | current | Not urgent Line default is activated | |
| 1.3.6.1.4.1.20044.29.10.31 | Notificationpm1004mLineTrapNotUrgentGoesOff | current | Not urgent Line default disappeared | |
| 1.3.6.1.4.1.20044.29.10.32 | Notificationpm1004mLineTrapUrgentGoesOn | current | Urgent Line default is activated | |
| 1.3.6.1.4.1.20044.29.10.33 | Notificationpm1004mLineTrapUrgentGoesOff | current | Urgent Line default disappeared | |
| 1.3.6.1.4.1.20044.29.10.34 | Notificationpm1004mLineTrapCritGoesOn | current | Critical Line default is activated | |
| 1.3.6.1.4.1.20044.29.10.35 | Notificationpm1004mLineTrapCritGoesOff | current | Critical Line default disappeared | |
| 1.3.6.1.4.1.20044.29.10.40 | Notificationpm1004mClientTrapNotUrgentGoesOn | current | Not urgent client default is activated | |
| 1.3.6.1.4.1.20044.29.10.41 | Notificationpm1004mClientTrapNotUrgentGoesOff | current | Not urgent client default disappeared | |
| 1.3.6.1.4.1.20044.29.10.42 | Notificationpm1004mClientTrapUrgentGoesOn | current | Urgent client default is activated | |
| 1.3.6.1.4.1.20044.29.10.43 | Notificationpm1004mClientTrapUrgentGoesOff | current | Urgent client default disappeared | |
| 1.3.6.1.4.1.20044.29.10.44 | Notificationpm1004mClientTrapCritGoesOn | current | Critical client default is activated | |
| 1.3.6.1.4.1.20044.29.10.45 | Notificationpm1004mClientTrapCritGoesOff | current | Critical client default disappeared | |
| 1.3.6.1.4.1.20044.29.10.50 | Notificationpm1004mPowerTrapUrgentGoesOn | current | Urgent power supply default is activated | |
| 1.3.6.1.4.1.20044.29.10.51 | Notificationpm1004mPowerTrapUrgentGoesOff | current | Urgent power supply default disappeared | |
| 1.3.6.1.4.1.20044.29.11 | Nodepm1004mMonitoring | |||
| 1.3.6.1.4.1.20044.29.11.1 | Nodepm1004mMonOther | |||
| 1.3.6.1.4.1.20044.29.11.1.1 | Nodepm1004mMonSync | |||
| 1.3.6.1.4.1.20044.29.11.1.1.257 | Scalarpm1004mPerfEnable | read-write | current | Perf. Mon. Enable :This OID enables the Performance Monitoring application |
| 1.3.6.1.4.1.20044.29.11.1.1.258 | Scalarpm1004mPerfSyncSource | read-write | current | Perf. Mon. Sync. Source :This OID selects the Synchronisation source for the Performance Monitoring application (internal of external) |
| 1.3.6.1.4.1.20044.29.11.1.1.259 | Scalarpm1004mPerf15minSync | read-write | current | Perf. Mon. 15-min sync. :This OID must be used in external synchronisation mode only to send a 15-min synchronisation command |
| 1.3.6.1.4.1.20044.29.11.1.1.260 | Scalarpm1004mPerf24hSync | read-write | current | Perf. Mon. 24-hours sync. :This OID must be used in external synchronisation mode only to send a 24-hours synchronisation command |
| 1.3.6.1.4.1.20044.29.11.1.2 | Nodepm1004mMonTimeStamp | |||
| 1.3.6.1.4.1.20044.29.11.1.2.5 | Scalarpm1004mPerfCurrent15MinElapsedTime | read-write | current | Current 15min period Elapsed Time :This OID gives the number of seconds elapsed in the current 15-minutes period |
| 1.3.6.1.4.1.20044.29.11.1.2.6 | Scalarpm1004mPerfCurrent24HoursElapsedTime | read-write | current | Current 24hours period Elapsed Time :This OID gives the number of seconds elapsed in the current 24-hours period |
| 1.3.6.1.4.1.20044.29.11.1.2.7 | Scalarpm1004mPerfPast15MinElapsedTime | read-write | current | Past 15min period Elapsed Time :This OID gives the number of seconds elapsed in the past 15-minutes period |
| 1.3.6.1.4.1.20044.29.11.1.2.8 | Scalarpm1004mPerfPast24HoursElapsedTime | read-write | current | Past 24hours period Elapsed Time :This OID gives the number of seconds elapsed in the past 24-hours period |
| 1.3.6.1.4.1.20044.29.11.2 | Nodepm1004mMonClient | |||
| 1.3.6.1.4.1.20044.29.11.2.1 | Nodepm1004mMonClientPerformance | |||
| 1.3.6.1.4.1.20044.29.11.2.1.16 | Tablepm1004mPerfUpCurrent15CntTable | not-accessible | current | List of pm1004mPerfUpCurrent15Cnt Article |
| 1.3.6.1.4.1.20044.29.11.2.1.16.1 | Rowpm1004mPerfUpCurrent15CntEntry | not-accessible | current | Row definition for the pm1004mPerfUpCurrent15Cnt table |
| 1.3.6.1.4.1.20044.29.11.2.1.16.1.1 | Columnpm1004mPerfUpCurrent15CntIndex | read-only | current | Index definition for the pm1004mPerfUpCurrent15Cnt table |
| 1.3.6.1.4.1.20044.29.11.2.1.16.1.2 | Columnpm1004mPerfUpCurrent15CntInvCvPortn | read-only | current | Current 15-min CV counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.29.11.2.1.16.1.3 | Columnpm1004mPerfUpCurrent15CntCvValuePortn | read-only | current | Current 15-min CV counter :This OID gives the current 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.29.11.2.1.16.1.4 | Columnpm1004mPerfUpCurrent15CntInvEsPortn | read-only | current | Current 15-min ES counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.29.11.2.1.16.1.5 | Columnpm1004mPerfUpCurrent15CntEsValuePortn | read-only | current | Current 15-min ES counter :This OID gives the current 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.29.11.2.1.16.1.6 | Columnpm1004mPerfUpCurrent15CntInvSesPortn | read-only | current | Current 15-min SES counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.29.11.2.1.16.1.7 | Columnpm1004mPerfUpCurrent15CntSesValuePortn | read-only | current | Current 15-min SES counter :This OID gives the current 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.29.11.2.1.16.1.8 | Columnpm1004mPerfUpCurrent15CntInvSefsPortn | read-only | current | Current 15-min SEFS counter inv. :This OID indicates that the current 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.29.11.2.1.16.1.9 | Columnpm1004mPerfUpCurrent15CntSefsValuePortn | read-only | current | Current 15-min SEFS counter :This OID gives the current 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.29.11.2.1.16.1.10 | Columnpm1004mPerfUpCurrent15CntInvUasPortn | read-only | current | Current 15-min UAS counter inv. :This OID indicates that the current 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.29.11.2.1.16.1.11 | Columnpm1004mPerfUpCurrent15CntUasValuePortn | read-only | current | Current 15-min UAS counter :This OID gives the current 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.29.11.2.1.24 | Tablepm1004mPerfUpPast15CntTable | not-accessible | current | List of pm1004mPerfUpPast15Cnt Article |
| 1.3.6.1.4.1.20044.29.11.2.1.24.1 | Rowpm1004mPerfUpPast15CntEntry | not-accessible | current | Row definition for the pm1004mPerfUpPast15Cnt table |
| 1.3.6.1.4.1.20044.29.11.2.1.24.1.1 | Columnpm1004mPerfUpPast15CntIndex | read-only | current | Index definition for the pm1004mPerfUpPast15Cnt table |
| 1.3.6.1.4.1.20044.29.11.2.1.24.1.2 | Columnpm1004mPerfUpPast15CntInvCvPortn | read-only | current | Previous 15-min CV counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.29.11.2.1.24.1.3 | Columnpm1004mPerfUpPast15CntCvValuePortn | read-only | current | Previous 15-min CV counter :This OID gives the previous 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.29.11.2.1.24.1.4 | Columnpm1004mPerfUpPast15CntInvEsPortn | read-only | current | Previous 15-min ES counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.29.11.2.1.24.1.5 | Columnpm1004mPerfUpPast15CntEsValuePortn | read-only | current | Previous 15-min ES counter :This OID gives the previous 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.29.11.2.1.24.1.6 | Columnpm1004mPerfUpPast15CntInvSesPortn | read-only | current | Previous 15-min SES counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.29.11.2.1.24.1.7 | Columnpm1004mPerfUpPast15CntSesValuePortn | read-only | current | Previous 15-min SES counter :This OID gives the previous 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.29.11.2.1.24.1.8 | Columnpm1004mPerfUpPast15CntInvSefsPortn | read-only | current | Previous 15-min SEFS counter inv. :This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.29.11.2.1.24.1.9 | Columnpm1004mPerfUpPast15CntSefsValuePortn | read-only | current | Previous 15-min SEFS counter :This OID gives the previous 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.29.11.2.1.24.1.10 | Columnpm1004mPerfUpPast15CntInvUasPortn | read-only | current | Previous 15-min UAS counter inv. :This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.29.11.2.1.24.1.11 | Columnpm1004mPerfUpPast15CntUasValuePortn | read-only | current | Previous 15-min UAS counter :This OID gives the previous 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.29.11.2.1.32 | Tablepm1004mPerfUpCurrent24CntTable | not-accessible | current | List of pm1004mPerfUpCurrent24Cnt Article |
| 1.3.6.1.4.1.20044.29.11.2.1.32.1 | Rowpm1004mPerfUpCurrent24CntEntry | not-accessible | current | Row definition for the pm1004mPerfUpCurrent24Cnt table |
| 1.3.6.1.4.1.20044.29.11.2.1.32.1.1 | Columnpm1004mPerfUpCurrent24CntIndex | read-only | current | Index definition for the pm1004mPerfUpCurrent24Cnt table |
| 1.3.6.1.4.1.20044.29.11.2.1.32.1.2 | Columnpm1004mPerfUpCurrent24CntInvCvPortn | read-only | current | Current 24-hours CV counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.29.11.2.1.32.1.3 | Columnpm1004mPerfUpCurrent24CntCvValuePortn | read-only | current | Current 24-hours CV counter :This OID gives the current 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.29.11.2.1.32.1.4 | Columnpm1004mPerfUpCurrent24CntInvEsPortn | read-only | current | Current 24-hours ES counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.29.11.2.1.32.1.5 | Columnpm1004mPerfUpCurrent24CntEsValuePortn | read-only | current | Current 24-hours ES counter :This OID gives the current 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.29.11.2.1.32.1.6 | Columnpm1004mPerfUpCurrent24CntInvSesPortn | read-only | current | Current 24-hours SES counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.29.11.2.1.32.1.7 | Columnpm1004mPerfUpCurrent24CntSesValuePortn | read-only | current | Current 24-hours SES counter :This OID gives the current 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.29.11.2.1.32.1.8 | Columnpm1004mPerfUpCurrent24CntInvSefsPortn | read-only | current | Current 24-hours SEFS counter inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.29.11.2.1.32.1.9 | Columnpm1004mPerfUpCurrent24CntSefsValuePortn | read-only | current | Current 24-hours SEFS counter :This OID gives the current 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.29.11.2.1.32.1.10 | Columnpm1004mPerfUpCurrent24CntInvUasPortn | read-only | current | Current 24-hours UAS counter inv. :This OID indicates that the current 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.29.11.2.1.32.1.11 | Columnpm1004mPerfUpCurrent24CntUasValuePortn | read-only | current | Current 24-hours UAS counter :This OID gives the current 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.29.11.2.1.40 | Tablepm1004mPerfUpPast24CntTable | not-accessible | current | List of pm1004mPerfUpPast24Cnt Article |
| 1.3.6.1.4.1.20044.29.11.2.1.40.1 | Rowpm1004mPerfUpPast24CntEntry | not-accessible | current | Row definition for the pm1004mPerfUpPast24Cnt table |
| 1.3.6.1.4.1.20044.29.11.2.1.40.1.1 | Columnpm1004mPerfUpPast24CntIndex | read-only | current | Index definition for the pm1004mPerfUpPast24Cnt table |
| 1.3.6.1.4.1.20044.29.11.2.1.40.1.2 | Columnpm1004mPerfUpPast24CntInvCvPortn | read-only | current | Previous 24-hours CV counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.29.11.2.1.40.1.3 | Columnpm1004mPerfUpPast24CntCvValuePortn | read-only | current | Previous 24-hours CV counter :This OID gives the previous 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.29.11.2.1.40.1.4 | Columnpm1004mPerfUpPast24CntInvEsPortn | read-only | current | Previous 24-hours ES counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.29.11.2.1.40.1.5 | Columnpm1004mPerfUpPast24CntEsValuePortn | read-only | current | Previous 24-hours ES counter :This OID gives the previous 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.29.11.2.1.40.1.6 | Columnpm1004mPerfUpPast24CntInvSesPortn | read-only | current | Previous 24-hours SES counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.29.11.2.1.40.1.7 | Columnpm1004mPerfUpPast24CntSesValuePortn | read-only | current | Previous 24-hours SES counter :This OID gives the previous 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.29.11.2.1.40.1.8 | Columnpm1004mPerfUpPast24CntInvSefsPortn | read-only | current | Previous 24-hours SEFS counter inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.29.11.2.1.40.1.9 | Columnpm1004mPerfUpPast24CntSefsValuePortn | read-only | current | Previous 24-hours SEFS counter :This OID gives the previous 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.29.11.2.1.40.1.10 | Columnpm1004mPerfUpPast24CntInvUasPortn | read-only | current | Previous 24-hours UAS counter inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.29.11.2.1.40.1.11 | Columnpm1004mPerfUpPast24CntUasValuePortn | read-only | current | Previous 24-hours UAS counter :This OID gives the previous 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.29.11.2.2 | Nodepm1004mMonClientTraceIdentifier | |||
| 1.3.6.1.4.1.20044.29.11.2.2.2112 | Tablepm1004mAlmj0AlarmTable | not-accessible | current | List of pm1004mAlmj0Alarm Article |
| 1.3.6.1.4.1.20044.29.11.2.2.2112.1 | Rowpm1004mAlmj0AlarmEntry | not-accessible | current | Row definition for the pm1004mAlmj0Alarm table |
| 1.3.6.1.4.1.20044.29.11.2.2.2112.1.1 | Columnpm1004mAlmj0AlarmIndex | read-only | current | Index definition for the pm1004mAlmj0Alarm table |
| 1.3.6.1.4.1.20044.29.11.2.2.2112.1.2 | Columnpm1004mAlmJ0TimAlarmPortn | read-only | current | Trace Identifier Mismatch :This OID indicates a Trace Identifier Mismatch has been detected on the client input stream <Condtype> J0_TIM_ALARM_1 <Probcause> ot… |
| 1.3.6.1.4.1.20044.29.11.2.2.2112.1.3 | Columnpm1004mAlmJ0TiiAlarmPortn | read-only | current | Trace Identifier Unstable :This OID indicates the Trace Identifier is unstable on the client input stream <Condtype> J0_TII_ALARM_1 <Probcause> other (1) <Alar… |
| 1.3.6.1.4.1.20044.29.11.2.2.2112.1.4 | Columnpm1004mAlmCrc7ErrorPortn | read-only | current | CRC Error On Trace Identifier :This OID indicates that a CRC error has been detected in the stable Trace Identifier on the client input stream <Condtype> CRC7_… |
| 1.3.6.1.4.1.20044.29.11.3 | Nodepm1004mMonLine | |||
| 1.3.6.1.4.1.20044.29.11.3.1 | Nodepm1004mMonLinePerformance | |||
| 1.3.6.1.4.1.20044.29.11.3.1.128 | Tablepm1004mPerfLineCurrent15CntTable | not-accessible | current | List of pm1004mPerfLineCurrent15Cnt Article |
| 1.3.6.1.4.1.20044.29.11.3.1.128.1 | Rowpm1004mPerfLineCurrent15CntEntry | not-accessible | current | Row definition for the pm1004mPerfLineCurrent15Cnt table |
| 1.3.6.1.4.1.20044.29.11.3.1.128.1.1 | Columnpm1004mPerfLineCurrent15CntIndex | read-only | current | Index definition for the pm1004mPerfLineCurrent15Cnt table |
| 1.3.6.1.4.1.20044.29.11.3.1.128.1.2 | Columnpm1004mPerfLineCurrent15CntInvCvPortn | read-only | current | Current 15-min CV counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.29.11.3.1.128.1.3 | Columnpm1004mPerfLineCurrent15CntCvValuePortn | read-only | current | Current 15-min CV counter :This OID gives the current 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.29.11.3.1.128.1.4 | Columnpm1004mPerfLineCurrent15CntInvEsPortn | read-only | current | Current 15-min ES counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.29.11.3.1.128.1.5 | Columnpm1004mPerfLineCurrent15CntEsValuePortn | read-only | current | Current 15-min ES counter :This OID gives the current 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.29.11.3.1.128.1.6 | Columnpm1004mPerfLineCurrent15CntInvSesPortn | read-only | current | Current 15-min SES counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.29.11.3.1.128.1.7 | Columnpm1004mPerfLineCurrent15CntSesValuePortn | read-only | current | Current 15-min SES counter :This OID gives the current 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.29.11.3.1.128.1.8 | Columnpm1004mPerfLineCurrent15CntInvSefsPortn | read-only | current | Current 15-min SEFS counter inv. :This OID indicates that the current 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.29.11.3.1.128.1.9 | Columnpm1004mPerfLineCurrent15CntSefsValuePortn | read-only | current | Current 15-min SEFS counter :This OID gives the current 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.29.11.3.1.128.1.10 | Columnpm1004mPerfLineCurrent15CntInvUasPortn | read-only | current | Current 15-min UAS counter inv. :This OID indicates that the current 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.29.11.3.1.128.1.11 | Columnpm1004mPerfLineCurrent15CntUasValuePortn | read-only | current | Current 15-min UAS counter :This OID gives the current 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.29.11.3.1.129 | Tablepm1004mPerfLinePast15CntTable | not-accessible | current | List of pm1004mPerfLinePast15Cnt Article |
| 1.3.6.1.4.1.20044.29.11.3.1.129.1 | Rowpm1004mPerfLinePast15CntEntry | not-accessible | current | Row definition for the pm1004mPerfLinePast15Cnt table |
| 1.3.6.1.4.1.20044.29.11.3.1.129.1.1 | Columnpm1004mPerfLinePast15CntIndex | read-only | current | Index definition for the pm1004mPerfLinePast15Cnt table |
| 1.3.6.1.4.1.20044.29.11.3.1.129.1.2 | Columnpm1004mPerfLinePast15CntInvCvPortn | read-only | current | Previous 15-min CV counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.29.11.3.1.129.1.3 | Columnpm1004mPerfLinePast15CntCvValuePortn | read-only | current | Previous 15-min CV counter :This OID gives the previous 15-min Coding Violation counter value |
| 1.3.6.1.4.1.20044.29.11.3.1.129.1.4 | Columnpm1004mPerfLinePast15CntInvEsPortn | read-only | current | Previous 15-min ES counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.29.11.3.1.129.1.5 | Columnpm1004mPerfLinePast15CntEsValuePortn | read-only | current | Previous 15-min ES counter :This OID gives the previous 15-min Errored Second counter value |
| 1.3.6.1.4.1.20044.29.11.3.1.129.1.6 | Columnpm1004mPerfLinePast15CntInvSesPortn | read-only | current | Previous 15-min SES counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.29.11.3.1.129.1.7 | Columnpm1004mPerfLinePast15CntSesValuePortn | read-only | current | Previous 15-min SES counter :This OID gives the previous 15-min severely Errored Second counter value |
| 1.3.6.1.4.1.20044.29.11.3.1.129.1.8 | Columnpm1004mPerfLinePast15CntInvSefsPortn | read-only | current | Previous 15-min SEFS counter inv. :This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.29.11.3.1.129.1.9 | Columnpm1004mPerfLinePast15CntSefsValuePortn | read-only | current | Previous 15-min SEFS counter :This OID gives the previous 15-min severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.29.11.3.1.129.1.10 | Columnpm1004mPerfLinePast15CntInvUasPortn | read-only | current | Previous 15-min UAS counter inv. :This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.29.11.3.1.129.1.11 | Columnpm1004mPerfLinePast15CntUasValuePortn | read-only | current | Previous 15-min UAS counter :This OID gives the previous 15-min UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.29.11.3.1.130 | Tablepm1004mPerfLineCurrent24CntTable | not-accessible | current | List of pm1004mPerfLineCurrent24Cnt Article |
| 1.3.6.1.4.1.20044.29.11.3.1.130.1 | Rowpm1004mPerfLineCurrent24CntEntry | not-accessible | current | Row definition for the pm1004mPerfLineCurrent24Cnt table |
| 1.3.6.1.4.1.20044.29.11.3.1.130.1.1 | Columnpm1004mPerfLineCurrent24CntIndex | read-only | current | Index definition for the pm1004mPerfLineCurrent24Cnt table |
| 1.3.6.1.4.1.20044.29.11.3.1.130.1.2 | Columnpm1004mPerfLineCurrent24CntInvCvPortn | read-only | current | Current 24-hours CV counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.29.11.3.1.130.1.3 | Columnpm1004mPerfLineCurrent24CntCvValuePortn | read-only | current | Current 24-hours CV counter :This OID gives the current 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.29.11.3.1.130.1.4 | Columnpm1004mPerfLineCurrent24CntInvEsPortn | read-only | current | Current 24-hours ES counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.29.11.3.1.130.1.5 | Columnpm1004mPerfLineCurrent24CntEsValuePortn | read-only | current | Current 24-hours ES counter :This OID gives the current 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.29.11.3.1.130.1.6 | Columnpm1004mPerfLineCurrent24CntInvSesPortn | read-only | current | Current 24-hours SES counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.29.11.3.1.130.1.7 | Columnpm1004mPerfLineCurrent24CntSesValuePortn | read-only | current | Current 24-hours SES counter :This OID gives the current 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.29.11.3.1.130.1.8 | Columnpm1004mPerfLineCurrent24CntInvSefsPortn | read-only | current | Current 24-hours SEFS counter inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.29.11.3.1.130.1.9 | Columnpm1004mPerfLineCurrent24CntSefsValuePortn | read-only | current | Current 24-hours SEFS counter :This OID gives the current 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.29.11.3.1.130.1.10 | Columnpm1004mPerfLineCurrent24CntInvUasPortn | read-only | current | Current 24-hours UAS counter inv. :This OID indicates that the current 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.29.11.3.1.130.1.11 | Columnpm1004mPerfLineCurrent24CntUasValuePortn | read-only | current | Current 24-hours UAS counter :This OID gives the current 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.29.11.3.1.131 | Tablepm1004mPerfLinePast24CntTable | not-accessible | current | List of pm1004mPerfLinePast24Cnt Article |
| 1.3.6.1.4.1.20044.29.11.3.1.131.1 | Rowpm1004mPerfLinePast24CntEntry | not-accessible | current | Row definition for the pm1004mPerfLinePast24Cnt table |
| 1.3.6.1.4.1.20044.29.11.3.1.131.1.1 | Columnpm1004mPerfLinePast24CntIndex | read-only | current | Index definition for the pm1004mPerfLinePast24Cnt table |
| 1.3.6.1.4.1.20044.29.11.3.1.131.1.2 | Columnpm1004mPerfLinePast24CntInvCvPortn | read-only | current | Previous 24-hours CV counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
| 1.3.6.1.4.1.20044.29.11.3.1.131.1.3 | Columnpm1004mPerfLinePast24CntCvValuePortn | read-only | current | Previous 24-hours CV counter :This OID gives the previous 24-hours Coding Violation counter value |
| 1.3.6.1.4.1.20044.29.11.3.1.131.1.4 | Columnpm1004mPerfLinePast24CntInvEsPortn | read-only | current | Previous 24-hours ES counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.29.11.3.1.131.1.5 | Columnpm1004mPerfLinePast24CntEsValuePortn | read-only | current | Previous 24-hours ES counter :This OID gives the previous 24-hours Errored Second counter value |
| 1.3.6.1.4.1.20044.29.11.3.1.131.1.6 | Columnpm1004mPerfLinePast24CntInvSesPortn | read-only | current | Previous 24-hours SES counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
| 1.3.6.1.4.1.20044.29.11.3.1.131.1.7 | Columnpm1004mPerfLinePast24CntSesValuePortn | read-only | current | Previous 24-hours SES counter :This OID gives the previous 24-hours severely Errored Second counter value |
| 1.3.6.1.4.1.20044.29.11.3.1.131.1.8 | Columnpm1004mPerfLinePast24CntInvSefsPortn | read-only | current | Previous 24-hours SEFS counter inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
| 1.3.6.1.4.1.20044.29.11.3.1.131.1.9 | Columnpm1004mPerfLinePast24CntSefsValuePortn | read-only | current | Previous 24-hours SEFS counter :This OID gives the previous 24-hours severely Errored Framing Second counter value |
| 1.3.6.1.4.1.20044.29.11.3.1.131.1.10 | Columnpm1004mPerfLinePast24CntInvUasPortn | read-only | current | Previous 24-hours UAS counter inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
| 1.3.6.1.4.1.20044.29.11.3.1.131.1.11 | Columnpm1004mPerfLinePast24CntUasValuePortn | read-only | current | Previous 24-hours UAS counter :This OID gives the previous 24-hours UnAvailable Second counter value |
| 1.3.6.1.4.1.20044.29.11.3.2 | Nodepm1004mMonLineTraceIdentifier |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Pm1004mAdjustValue | INTEGER { otxadjustvalue0(0), otxadjustvalue1(1), otxadjustvalue2(2), otxadjustvalue3(3), otxadjustvalue4(4), otxadjustvalue5(5), otxadjustvalue6(6), otxadjustvalue7(7), otxadjustvalue8(8), otxadjustvalue9(9), otxadjustvalue10(10), } | current | Different values in Adjust mode on OTX-TLH on client and line ports |
| Pm1004mOtxChannel | INTEGER { } | current | Channel selection on OTX-TLH on client and line ports |
| Pm1004mOtxGrid | INTEGER { otxgrid200(200), otxgrid100(100), otxgrid50(50), } | current | Different grids on OTX-TLH on client and line ports |
| Pm1004mOtxMode | INTEGER { otx80mode(1), otx60mode(2), otxadjustmode(4), } | current | Different modes on OTX-TLH on client and line ports |