EKINOPS-Pm1004venc-MIB
560 objects
MIB for managing Ekinops modules with PM1004VENC software
Imported Objects
| EKINOPS-MIB | EkiApiState EkiMeasureType EkiMode ekinops EkiOnOff EkiProtocol EkiState EkiSynchroMode |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.20044.43 | IdentitymodulePm1004venc | MIB for managing Ekinops modules with PM1004VENC software | ||
| 1.3.6.1.4.1.20044.43.2 | Nodepm1004vencalarms | |||
| 1.3.6.1.4.1.20044.43.2.1 | Nodepm1004vencAlmOther | |||
| 1.3.6.1.4.1.20044.43.2.1.1 | Nodepm1004vencAlmOtherNurg | |||
| 1.3.6.1.4.1.20044.43.2.1.1.2 | Nodepm1004vencAlmsynthAlm2 | |||
| 1.3.6.1.4.1.20044.43.2.1.1.2.1 | Scalarpm1004vencAlmConfTableSave | read-only | current | PM Configuration Save :This OID is at 1 during the saving of a new configuration table in the module Flash memory. <Condtype> CONF_TABLE_SAVE <Probcause> other… |
| 1.3.6.1.4.1.20044.43.2.1.1.2.2 | Scalarpm1004vencAlmInvUpload | read-only | current | Inventory Upload :This OID is at 1 during the uploading of PM inventory information. <Condtype> INV_UPLOAD <Probcause> other (1) <Alarmtype> other (1) <Polarit… |
| 1.3.6.1.4.1.20044.43.2.1.1.2.3 | Scalarpm1004vencAlmConfTableLoad | read-only | current | PM Configuration Load :This OID is at 1 during the loading of configuration tables in the modules RAM. <Condtype> CONF_TABLE_LOAD <Probcause> other (1) <Alarmt… |
| 1.3.6.1.4.1.20044.43.2.1.1.2.4 | Scalarpm1004vencAlmCorrelatOff | read-only | current | Not Used :This OID, when set, indicates that alarm correlation is not being performed. <Condtype> CORRELAT_OFF <Probcause> other (1) <Alarmtype> other (1) <Pol… |
| 1.3.6.1.4.1.20044.43.2.1.1.2.5 | Scalarpm1004vencAlmMaintenanceOn | read-only | current | Maintenance Mode :This OID indicates that the PM is in maintenance mode. <Help> This alarm indicates that the maintenance mode is enabled on the PM <Condtype> … |
| 1.3.6.1.4.1.20044.43.2.1.2 | Nodepm1004vencAlmOtherUrg | |||
| 1.3.6.1.4.1.20044.43.2.1.2.194 | Nodepm1004vencAlmmodInitFailLevel2 | |||
| 1.3.6.1.4.1.20044.43.2.1.2.194.1 | Scalarpm1004vencAlmLedFail | read-only | current | Led Fail :This OID indicates that Led register has not been correctly initalized <Help> This alarm indicates if the module LEDs are correctly initialized <Cond… |
| 1.3.6.1.4.1.20044.43.2.1.2.194.2 | Scalarpm1004vencAlmNextColdBootForced | read-only | current | Next Cold Boot Forced :This OID indicates that the next Reset will be forced Cold <Help> This alarm indicates that the next reset of the module will be forced … |
| 1.3.6.1.4.1.20044.43.2.1.2.194.3 | Scalarpm1004vencAlmBootUndone | read-only | current | Boot Undone :This OID indicates that the boot has not been correctly achieved <Help> This alarm indicates if the module has correctly boot <Condtype> BOOT_UNDO… |
| 1.3.6.1.4.1.20044.43.2.1.2.194.4 | Scalarpm1004vencAlmResetHwInitFail | read-only | current | Reset HW Init Fail :This OID indicates that the HW intialization has caused unknown intial conditions <Help> This alarm indicates if the HW has been correctly … |
| 1.3.6.1.4.1.20044.43.2.1.2.194.5 | Scalarpm1004vencAlmSwInitFail | read-only | current | SW Init Fail :This OID indicates that the SW intialization has caused unknown intial conditions <Help> This alarm indicates if the SW module is correctly initi… |
| 1.3.6.1.4.1.20044.43.2.1.2.195 | Nodepm1004vencAlmmodInitFailLevel3 | |||
| 1.3.6.1.4.1.20044.43.2.1.2.195.1 | Scalarpm1004vencAlmGwIdentFail | read-only | current | GW Ident Fail :This OID indicates that GW identification has not been read <Help> This alarm indicates if the GW has been correctly identified <Condtype> GW_ID… |
| 1.3.6.1.4.1.20044.43.2.1.2.195.2 | Scalarpm1004vencAlmObmTypeReadFail | read-only | current | OBM Type Read Fail :This OID indicates that OBM type has not been recognized <Help> This alarm indicates if the OBM board has been correctly identified <Condty… |
| 1.3.6.1.4.1.20044.43.2.1.2.195.3 | Scalarpm1004vencAlmInitModuleFail | read-only | current | Init Module Fail :This OID indicates that the Module has not been correctly initialized <Help> This alarm indicates if the SW module is correctly initialized <… |
| 1.3.6.1.4.1.20044.43.2.1.2.195.5 | Scalarpm1004vencAlmXfp1InitFail | read-only | current | XFP1 Init Fail :This OID indicates that the XFP has not been correctly initialized <Help> This alarm indicates if the line transceiver 1 is correctly initializ… |
| 1.3.6.1.4.1.20044.43.2.1.2.195.6 | Scalarpm1004vencAlmXfp2InitFail | read-only | current | XFP2 Init Fail :This OID indicates that the XFP has not been correctly initialized <Help> This alarm indicates if the line transceiver 2 is correctly initializ… |
| 1.3.6.1.4.1.20044.43.2.1.2.195.7 | Scalarpm1004vencAlmLine1InitFail | read-only | current | Line1 Init Fail :This OID indicates that the Line registersvsubset has not been correctly initialized <Help> This alarm indicates if the line port 1 is correct… |
| 1.3.6.1.4.1.20044.43.2.1.2.195.8 | Scalarpm1004vencAlmLine2InitFail | read-only | current | Line2 Init Fail :This OID indicates that the Line register subset has not been correctly initialized <Help> This alarm indicates if the line port 2 is correctl… |
| 1.3.6.1.4.1.20044.43.2.1.2.195.9 | Scalarpm1004vencAlmClient1InitFail | read-only | current | Client1 Init Fail :This OID indicates that Client 1 registers subset has not been correctly initialized <Help> This alarm indicates if the client port 1 is cor… |
| 1.3.6.1.4.1.20044.43.2.1.2.195.10 | Scalarpm1004vencAlmClient2InitFail | read-only | current | Client2 Init Fail :This OID indicates that Client 2 registers subset has not been correctly initialized <Help> This alarm indicates if the client port 2 is cor… |
| 1.3.6.1.4.1.20044.43.2.1.2.195.11 | Scalarpm1004vencAlmClient3InitFail | read-only | current | Client3 Init Fail :This OID indicates that Client 3 registers subset has not been correctly initialized <Help> This alarm indicates if the client port 3 is cor… |
| 1.3.6.1.4.1.20044.43.2.1.2.195.12 | Scalarpm1004vencAlmClient4InitFail | read-only | current | Client4 Init Fail :This OID indicates that Client 4 registers subset has not been correctly initialized <Help> This alarm indicates if the client port 4 is cor… |
| 1.3.6.1.4.1.20044.43.2.1.2.198 | Nodepm1004vencAlmclientRxProt | |||
| 1.3.6.1.4.1.20044.43.2.1.2.198.1 | Scalarpm1004vencAlmAdddropClient1West | read-only | current | Client West Rx Side Active :This OID indicates the Client is active on West receiving side <Condtype> ADDDROP_CLIENT1_WEST <Probcause> other (1) <Alarmtype> ot… |
| 1.3.6.1.4.1.20044.43.2.1.2.198.2 | Scalarpm1004vencAlmAdddropClient2West | read-only | current | Client West Rx Side Active :This OID indicates the Client is active on West receiving side <Condtype> ADDDROP_CLIENT2_WEST <Probcause> other (1) <Alarmtype> ot… |
| 1.3.6.1.4.1.20044.43.2.1.2.198.3 | Scalarpm1004vencAlmAdddropClient3West | read-only | current | Client West Rx Side Active :This OID indicates the Client is active on West receiving side <Condtype> ADDDROP_CLIENT3_WEST <Probcause> other (1) <Alarmtype> ot… |
| 1.3.6.1.4.1.20044.43.2.1.2.198.4 | Scalarpm1004vencAlmAdddropClient4West | read-only | current | Client West Rx Side Active :This OID indicates the Client is active on West receiving side <Condtype> ADDDROP_CLIENT4_WEST <Probcause> other (1) <Alarmtype> ot… |
| 1.3.6.1.4.1.20044.43.2.1.2.198.9 | Scalarpm1004vencAlmAdddropClient1East | read-only | current | Client East Rx Side Active :This OID indicates the Client is active on East receiving side <Condtype> ADDDROP_CLIENT1_EAST <Probcause> other (1) <Alarmtype> ot… |
| 1.3.6.1.4.1.20044.43.2.1.2.198.10 | Scalarpm1004vencAlmAdddropClient2East | read-only | current | Client East Rx Side Active :This OID indicates the Client is active on East receiving side <Condtype> ADDDROP_CLIENT2_EAST <Probcause> other (1) <Alarmtype> ot… |
| 1.3.6.1.4.1.20044.43.2.1.2.198.11 | Scalarpm1004vencAlmAdddropClient3East | read-only | current | Client East Rx Side Active :This OID indicates the Client is active on East receiving side <Condtype> ADDDROP_CLIENT3_EAST <Probcause> other (1) <Alarmtype> ot… |
| 1.3.6.1.4.1.20044.43.2.1.2.198.12 | Scalarpm1004vencAlmAdddropClient4East | read-only | current | Client East Rx Side Active :This OID indicates the Client is active on East receiving side <Condtype> ADDDROP_CLIENT4_EAST <Probcause> other (1) <Alarmtype> ot… |
| 1.3.6.1.4.1.20044.43.2.1.2.199 | Nodepm1004vencAlmmodOther | |||
| 1.3.6.1.4.1.20044.43.2.1.2.199.1 | Scalarpm1004vencAlmAesDecodFail | read-only | current | AES Decoding Failure :This OID indicates the AES Decoding process failed. <Help> This alarm indicates the AES Decoding process failed. <Condtype> AES_DECOD_FAI… |
| 1.3.6.1.4.1.20044.43.2.1.3 | Nodepm1004vencAlmOtherCrit | |||
| 1.3.6.1.4.1.20044.43.2.1.3.0 | Nodepm1004vencAlmsynthAlm0 | |||
| 1.3.6.1.4.1.20044.43.2.1.3.0.9 | Scalarpm1004vencAlmModGlobFail | read-only | current | Module Failure :This OID is set on detection of a failure originating from the PM <Condtype> MOD_GLOB_FAIL <Probcause> equipmentMalfunction (16) <Alarmtype> sy… |
| 1.3.6.1.4.1.20044.43.2.1.3.0.15 | Scalarpm1004vencAlmDefFuseA | read-only | current | Fuse A Fail :This OID indicates that the fuse of the power input A is in fail condition <Help> Status of the Fuse A <Condtype> DEF_FUSE_A <Probcause> powerProb… |
| 1.3.6.1.4.1.20044.43.2.1.3.0.16 | Scalarpm1004vencAlmDefFuseB | read-only | current | Fuse B Fail :This OID indicates that the fuse of the power input B is in fail condition <Help> Status of the Fuse B <Condtype> DEF_FUSE_B <Probcause> powerProb… |
| 1.3.6.1.4.1.20044.43.2.2 | Nodepm1004vencAlmClient | |||
| 1.3.6.1.4.1.20044.43.2.2.1 | Nodepm1004vencAlmClientNurg | |||
| 1.3.6.1.4.1.20044.43.2.2.2 | Nodepm1004vencAlmClientUrg | |||
| 1.3.6.1.4.1.20044.43.2.2.3 | Nodepm1004vencAlmClientCrit | |||
| 1.3.6.1.4.1.20044.43.2.2.3.8 | Tablepm1004vencAlmsynthAlmPortTable | not-accessible | current | List of pm1004vencAlmsynthAlmPort Article |
| 1.3.6.1.4.1.20044.43.2.2.3.8.1 | Rowpm1004vencAlmsynthAlmPortEntry | not-accessible | current | Row definition for the pm1004vencAlmsynthAlmPort table |
| 1.3.6.1.4.1.20044.43.2.2.3.8.1.1 | Columnpm1004vencAlmsynthAlmPortIndex | read-only | current | Index definition for the pm1004vencAlmsynthAlmPort table |
| 1.3.6.1.4.1.20044.43.2.2.3.8.1.5 | Columnpm1004vencAlmHwFailAccPortn | read-only | current | Client HW Fail :This OID indicates a failure on client port, most probably caused by a HW issue. <Condtype> HW_FAIL_ACC_1 <Probcause> equipmentMalfunction (16)… |
| 1.3.6.1.4.1.20044.43.2.2.3.8.1.6 | Columnpm1004vencAlmDwLsdPortn | read-only | current | Client Signal Shutdown :This OID indicates the Client SFP transmitter output is ON. <Help> This status indicates if the client transceiver is ON or OFF <Condty… |
| 1.3.6.1.4.1.20044.43.2.2.3.8.1.7 | Columnpm1004vencAlmClientLocalOosTxPortn | read-only | current | Tx Client Port In Service :This OID indicates that the local Tx Client port is In Service (1) or Out of Service (2) <Help> This status indicates if the local T… |
| 1.3.6.1.4.1.20044.43.2.2.3.8.1.8 | Columnpm1004vencAlmClientLocalOosRxPortn | read-only | current | Rx Client Port In Service :This OID indicates that the local Rx Client port is In Service (1) or Out of Service (2) <Help> This status indicates if the local R… |
| 1.3.6.1.4.1.20044.43.2.2.3.8.1.9 | Columnpm1004vencAlmDwCaisPortn | read-only | current | Client AIS Inserted :This OID indicates a CAIS has been inserted on the output client port. <Help> This status indictaes if a Client Alarm Indication Signal is… |
| 1.3.6.1.4.1.20044.43.2.2.3.8.1.13 | Columnpm1004vencAlmFailAccPortn | read-only | current | Client Access Fail :This OID indicates a failure on the Client port <Condtype> FAIL_ACC_1 <Probcause> equipmentMalfunction (16) <Alarmtype> synthesisAlarm (12)… |
| 1.3.6.1.4.1.20044.43.2.2.3.8.1.17 | Columnpm1004vencAlmUpCsfPortn | read-only | current | Client Signal Fail Inserted :This OID indicates a CSF has been inserted in the upstream client port. <Help> This status indicates if a Client Signal Fail is cu… |
| 1.3.6.1.4.1.20044.43.2.2.3.16 | Tablepm1004vencAlmaccessioAlmTable | not-accessible | current | List of pm1004vencAlmaccessioAlm Article |
| 1.3.6.1.4.1.20044.43.2.2.3.16.1 | Rowpm1004vencAlmaccessioAlmEntry | not-accessible | current | Row definition for the pm1004vencAlmaccessioAlm table |
| 1.3.6.1.4.1.20044.43.2.2.3.16.1.1 | Columnpm1004vencAlmaccessioAlmIndex | read-only | current | Index definition for the pm1004vencAlmaccessioAlm table |
| 1.3.6.1.4.1.20044.43.2.2.3.16.1.5 | Columnpm1004vencAlmUpLosPortn | read-only | current | Client Input Loss Of Signal :This OID indicates that no signal is present on the client port <Help> This alarm indicates if a signal is detected on the client … |
| 1.3.6.1.4.1.20044.43.2.2.3.72 | Tablepm1004vencAlmmapperDeAlmTable | not-accessible | current | List of pm1004vencAlmmapperDeAlm Article |
| 1.3.6.1.4.1.20044.43.2.2.3.72.1 | Rowpm1004vencAlmmapperDeAlmEntry | not-accessible | current | Row definition for the pm1004vencAlmmapperDeAlm table |
| 1.3.6.1.4.1.20044.43.2.2.3.72.1.1 | Columnpm1004vencAlmmapperDeAlmIndex | read-only | current | Index definition for the pm1004vencAlmmapperDeAlm table |
| 1.3.6.1.4.1.20044.43.2.2.3.72.1.2 | Columnpm1004vencAlmUpAccOosPortn | read-only | current | Client Loss Of Synchro :This OID indicates the upstream client input port has lost synchronization on its decoder <Help> This alarms indicates if the input cli… |
| 1.3.6.1.4.1.20044.43.2.2.3.72.1.11 | Columnpm1004vencAlmUpBufferOvlPortn | read-only | current | Client Upstream Buffer Overload :This OID indicates that the rate adaptation buffer for client port is in overload. <Help> This alarm indicates if there is a u… |
| 1.3.6.1.4.1.20044.43.2.2.3.72.1.12 | Columnpm1004vencAlmDwCsfDetPortn | read-only | current | Client Signal Fail Detected :This OID indicates that a CSF has been detected on client port in the downstream direction <Help> This alarm indicates if a Client… |
| 1.3.6.1.4.1.20044.43.2.2.3.72.1.15 | Columnpm1004vencAlmDwBufferOvlPortn | read-only | current | Client Downstream Buffer Overload :This OID indicates that the de-mapper buffer for client port is in overload. <Help> This alarm indicates if there is a downs… |
| 1.3.6.1.4.1.20044.43.2.2.3.112 | Tablepm1004vencAlmvideoProtocolStatusTable | not-accessible | current | List of pm1004vencAlmvideoProtocolStatus Article |
| 1.3.6.1.4.1.20044.43.2.2.3.112.1 | Rowpm1004vencAlmvideoProtocolStatusEntry | not-accessible | current | Row definition for the pm1004vencAlmvideoProtocolStatus table |
| 1.3.6.1.4.1.20044.43.2.2.3.112.1.1 | Columnpm1004vencAlmvideoProtocolStatusIndex | read-only | current | Index definition for the pm1004vencAlmvideoProtocolStatus table |
| 1.3.6.1.4.1.20044.43.2.2.3.112.1.2 | Columnpm1004vencAlmSdiTxPortn | read-only | current | SDI Detected On Tx :This OID indicates that the SDI protocol has been detected on the transmit side of the port (only significant on Video2 to Video 5 ports) <… |
| 1.3.6.1.4.1.20044.43.2.2.3.112.1.3 | Columnpm1004vencAlmHdSdiPalTxPortn | read-only | current | HD-SDI-PAL Detected On Tx :This OID indicates that the HD-SDI-PAL protocol has been detected on the transmit side of the port (only significant on Video2 to Vi… |
| 1.3.6.1.4.1.20044.43.2.2.3.112.1.4 | Columnpm1004vencAlmHdSdiNtscTxPortn | read-only | current | HD-SDI-NTSC Detected On Tx :This OID indicates that the HD-SDI-NTSC protocol has been detected on the transmit side of the port (only significant on Video2 to … |
| 1.3.6.1.4.1.20044.43.2.2.3.112.1.5 | Columnpm1004vencAlmDvbAsiTxPortn | read-only | current | DVB-ASI Detected On Tx :This OID indicates that the DVB-ASI protocol has been detected on the transmit side of the port (only significant on Video2 to Video 5 … |
| 1.3.6.1.4.1.20044.43.2.2.3.112.1.10 | Columnpm1004vencAlmSdiRxPortn | read-only | current | SDI Detected On Rx :This OID indicates that the SDI protocol has been detected on the receive side of the port (only significant on Video2 to Video 5 ports) <H… |
| 1.3.6.1.4.1.20044.43.2.2.3.112.1.11 | Columnpm1004vencAlmHdSdiPalRxPortn | read-only | current | HD-SDI-PAL Detected On Rx :This OID indicates that the HD-SDI-PAL protocol has been detected on the receive side of the port (only significant on Video2 to Vid… |
| 1.3.6.1.4.1.20044.43.2.2.3.112.1.12 | Columnpm1004vencAlmHdSdiNtscRxPortn | read-only | current | HD-SDI-NTSC Detected On Rx :This OID indicates that the HD-SDI-NTSC protocol has been detected on the receive side of the port (only significant on Video2 to V… |
| 1.3.6.1.4.1.20044.43.2.2.3.112.1.13 | Columnpm1004vencAlmDvbAsiRxPortn | read-only | current | DVB-ASI Detected On Rx :This OID indicates that the DVB-ASI protocol has been detected on the receive side of the port (only significant on Video2 to Video 5 p… |
| 1.3.6.1.4.1.20044.43.2.3 | Nodepm1004vencAlmLine | |||
| 1.3.6.1.4.1.20044.43.2.3.1 | Nodepm1004vencAlmLineNurg | |||
| 1.3.6.1.4.1.20044.43.2.3.1.209 | Tablepm1004vencAlmlineXfp1WarningsTable | not-accessible | current | List of pm1004vencAlmlineXfp1Warnings Article |
| 1.3.6.1.4.1.20044.43.2.3.1.209.1 | Rowpm1004vencAlmlineXfp1WarningsEntry | not-accessible | current | Row definition for the pm1004vencAlmlineXfp1Warnings table |
| 1.3.6.1.4.1.20044.43.2.3.1.209.1.1 | Columnpm1004vencAlmlineXfp1WarningsIndex | read-only | current | Index definition for the pm1004vencAlmlineXfp1Warnings table |
| 1.3.6.1.4.1.20044.43.2.3.1.209.1.2 | Columnpm1004vencAlmTxPowerLowWarningPortn | read-only | current | Line Optical Tx Power Low Warning :Warning indicating that the XFP/OTX transmitter transmitter output power is lower than the threshold value written in the XF… |
| 1.3.6.1.4.1.20044.43.2.3.1.209.1.3 | Columnpm1004vencAlmTxPowerHighWarningPortn | read-only | current | Line Optical Tx Power High Warning :Warning indicating that the XFP/OTX transmitter transmitter output power is higher than the threshold value written in the … |
| 1.3.6.1.4.1.20044.43.2.3.1.209.1.4 | Columnpm1004vencAlmTxBiasLowWarningPortn | read-only | current | Line Transceiver Bias Low Warning :Warning indicating that the XFP/OTX transmitter laser bias current is lower than the threshold value written in the XFP/OTX … |
| 1.3.6.1.4.1.20044.43.2.3.1.209.1.5 | Columnpm1004vencAlmTxBiasHighWarningPortn | read-only | current | Line Transceiver Bias High Warning :Warning indicating that the XFP/OTX transmitter laser bias current is higher than the threshold value written in the XFP EE… |
| 1.3.6.1.4.1.20044.43.2.3.1.209.1.8 | Columnpm1004vencAlmTempLowWarningPortn | read-only | current | Line Transceiver Temp Low Warning :Warning indicating that the XFP/OTX temperature is lower than the threshold value written in the XFP/OTX EEPROM <Condtype> T… |
| 1.3.6.1.4.1.20044.43.2.3.1.209.1.9 | Columnpm1004vencAlmTempHighWarningPortn | read-only | current | Line Transceiver Temp High Warning :Warning indicating that the XFP/OTX temperature is higher than the threshold value written in the XFP EEPROM <Condtype> TEM… |
| 1.3.6.1.4.1.20044.43.2.3.1.209.1.16 | Columnpm1004vencAlmRxPowerLowWarningPortn | read-only | current | Line Optical Rx Power Low Warning :Warning indicating that the XFP received optical power is lower than the threshold value written in the XFP EEPROM <Condtype… |
| 1.3.6.1.4.1.20044.43.2.3.1.209.1.17 | Columnpm1004vencAlmRxPowerHighWarningPortn | read-only | current | Line Optical Rx Power High Warning :Warning indicating that the XFP received optical power is higher than the threshold value written in the XFP EEPROM <Condty… |
| 1.3.6.1.4.1.20044.43.2.3.1.225 | Tablepm1004vencAlmlineOtx1TlhWarningsTable | not-accessible | current | List of pm1004vencAlmlineOtx1TlhWarnings Article |
| 1.3.6.1.4.1.20044.43.2.3.1.225.1 | Rowpm1004vencAlmlineOtx1TlhWarningsEntry | not-accessible | current | Row definition for the pm1004vencAlmlineOtx1TlhWarnings table |
| 1.3.6.1.4.1.20044.43.2.3.1.225.1.1 | Columnpm1004vencAlmlineOtx1TlhWarningsIndex | read-only | current | Index definition for the pm1004vencAlmlineOtx1TlhWarnings table |
| 1.3.6.1.4.1.20044.43.2.3.1.225.1.6 | Columnpm1004vencAlmLineModulatorAgingHighWarningPortn | read-only | current | Line Modulator Aging High Warning :Warning indicating the Line OTX TLH modulator aging is higher than the threshold written in the EEPROM <Condtype> LINE_MODUL… |
| 1.3.6.1.4.1.20044.43.2.3.1.225.1.7 | Columnpm1004vencAlmLineAgingHighWarningPortn | read-only | current | Line OTX TLH Aging High Warning :Warning indicating the Line OTX TLH aging is higher than the threshold written in the EEPROM <Condtype> LINE_AGING_HIGH_WARNIN… |
| 1.3.6.1.4.1.20044.43.2.3.1.225.1.13 | Columnpm1004vencAlmLineFreqDevHighWarningPortn | read-only | current | Line Freq. Deviation High Warning :Warning indicating the Line OTX TLH frequency deviation is higher than the threshold written in the EEPROM <Condtype> LINE_F… |
| 1.3.6.1.4.1.20044.43.2.3.1.225.1.15 | Columnpm1004vencAlmLineLaserTempHighWarningPortn | read-only | current | Line Laser Temp. High Warning :Warning indicating the Line OTX TLH laser temperature is higher than the threshold written in the EEPROM <Condtype> LINE_LASER_T… |
| 1.3.6.1.4.1.20044.43.2.3.2 | Nodepm1004vencAlmLineUrg | |||
| 1.3.6.1.4.1.20044.43.2.3.2.208 | Tablepm1004vencAlmlineXfp1AlarmTable | not-accessible | current | List of pm1004vencAlmlineXfp1Alarm Article |
| 1.3.6.1.4.1.20044.43.2.3.2.208.1 | Rowpm1004vencAlmlineXfp1AlarmEntry | not-accessible | current | Row definition for the pm1004vencAlmlineXfp1Alarm table |
| 1.3.6.1.4.1.20044.43.2.3.2.208.1.1 | Columnpm1004vencAlmlineXfp1AlarmIndex | read-only | current | Index definition for the pm1004vencAlmlineXfp1Alarm table |
| 1.3.6.1.4.1.20044.43.2.3.2.208.1.2 | Columnpm1004vencAlmTxPowerLowAlarmPortn | read-only | current | Line Optical Tx Power Low :Alarm indicating that the XFP/OTX transmitter transmitter output power is lower than the threshold value written in the XFP/OTX EEPR… |
| 1.3.6.1.4.1.20044.43.2.3.2.208.1.3 | Columnpm1004vencAlmTxPowerHighAlarmPortn | read-only | current | Line Optical Tx Power High :Alarm indicating that the XFP/OTX transmitter transmitter output power is higher than the threshold value written in the XFP EEPROM… |
| 1.3.6.1.4.1.20044.43.2.3.2.208.1.4 | Columnpm1004vencAlmTxBiasLowAlarmPortn | read-only | current | Line Transceiver Bias Low :Alarm indicating that the XFP/OTX transmitter laser bias current is lower than the threshold value written in the XFP/OTX EEPROM <Co… |
| 1.3.6.1.4.1.20044.43.2.3.2.208.1.5 | Columnpm1004vencAlmTxBiasHighAlarmPortn | read-only | current | Line Transceiver Bias High :Alarm indicating that the XFP/OTX transmitter laser bias current is higher than the threshold value written in the XFP EEPROM <Cond… |
| 1.3.6.1.4.1.20044.43.2.3.2.208.1.8 | Columnpm1004vencAlmTempLowAlarmPortn | read-only | current | Line Transceiver Temp Low :Alarm indicating that the XFP/OTX temperature is lower than the threshold value written in the XFP/OTX EEPROM <Condtype> TEMP_LOW_AL… |
| 1.3.6.1.4.1.20044.43.2.3.2.208.1.9 | Columnpm1004vencAlmTempHighAlarmPortn | read-only | current | Line Transceiver Temp High :Alarm indicating that the XFP/OTX temperature is higher than the threshold value written in the XFP EEPROM <Condtype> TEMP_HIGH_ALA… |
| 1.3.6.1.4.1.20044.43.2.3.2.208.1.16 | Columnpm1004vencAlmRxPowerLowAlarmPortn | read-only | current | Line Optical Rx Power Low :Alarm indicating that the XFP received optical power is lower than the threshold value written in the XFP EEPROM <Condtype> RX_POWER… |
| 1.3.6.1.4.1.20044.43.2.3.2.208.1.17 | Columnpm1004vencAlmRxPowerHighAlarmPortn | read-only | current | Line Optical Rx Power High :Alarm indicating that the XFP received optical power is higher than the threshold value written in the XFP EEPROM <Condtype> RX_POW… |
| 1.3.6.1.4.1.20044.43.2.3.2.210 | Tablepm1004vencAlmlineXfp1CritTable | not-accessible | current | List of pm1004vencAlmlineXfp1Crit Article |
| 1.3.6.1.4.1.20044.43.2.3.2.210.1 | Rowpm1004vencAlmlineXfp1CritEntry | not-accessible | current | Row definition for the pm1004vencAlmlineXfp1Crit table |
| 1.3.6.1.4.1.20044.43.2.3.2.210.1.1 | Columnpm1004vencAlmlineXfp1CritIndex | read-only | current | Index definition for the pm1004vencAlmlineXfp1Crit table |
| 1.3.6.1.4.1.20044.43.2.3.2.210.1.2 | Columnpm1004vencAlmTxPowerLowCritPortn | read-only | current | Line Custom Tx Power Low :Custom Alarm indicating that the XFP/OTX output power of port is lower than the custom threshold defined in configuration <Help> Cust… |
| 1.3.6.1.4.1.20044.43.2.3.2.210.1.3 | Columnpm1004vencAlmTxPowerHighCritPortn | read-only | current | Line Custom Tx Power High :Custom Alarm indicating that the XFP/OTX output power of port is higher than the custom threshold defined in configuration <Help> Cu… |
| 1.3.6.1.4.1.20044.43.2.3.2.210.1.16 | Columnpm1004vencAlmRxPowerLowCritPortn | read-only | current | Line Custom Rx Power Low :Custom Alarm indicating that the XFP/OTX input power of port is lower than the custom threshold defined in configuration <Help> Custo… |
| 1.3.6.1.4.1.20044.43.2.3.2.210.1.17 | Columnpm1004vencAlmRxPowerHighCritPortn | read-only | current | Line Custom Rx Power High :Custom Alarm indicating that the XFP/OTX input power of port is higher than the custom threshold defined in configuration <Help> Cus… |
| 1.3.6.1.4.1.20044.43.2.3.2.212 | Tablepm1004vencAlmlineXfp1SupplyAlarmTable | not-accessible | current | List of pm1004vencAlmlineXfp1SupplyAlarm Article |
| 1.3.6.1.4.1.20044.43.2.3.2.212.1 | Rowpm1004vencAlmlineXfp1SupplyAlarmEntry | not-accessible | current | Row definition for the pm1004vencAlmlineXfp1SupplyAlarm table |
| 1.3.6.1.4.1.20044.43.2.3.2.212.1.1 | Columnpm1004vencAlmlineXfp1SupplyAlarmIndex | read-only | current | Index definition for the pm1004vencAlmlineXfp1SupplyAlarm table |
| 1.3.6.1.4.1.20044.43.2.3.2.212.1.2 | Columnpm1004vencAlmVee5LowAlarmPortn | read-only | current | VEE5 Power Supply Low :Alarm indicating the XFP/OTX VEE5 power supply is lower than the threshold written in the EEPROM <Condtype> VEE5_LOW_ALARM_1 <Probcause>… |
| 1.3.6.1.4.1.20044.43.2.3.2.212.1.3 | Columnpm1004vencAlmVee5HighAlarmPortn | read-only | current | VEE5 Power Supply High :Alarm indicating the XFP/OTX VEE5 power supply is higher than the threshold written in the EEPROM <Condtype> VEE5_HIGH_ALARM_1 <Probcau… |
| 1.3.6.1.4.1.20044.43.2.3.2.212.1.4 | Columnpm1004vencAlmVcc2LowAlarmPortn | read-only | current | VCC2 Power Supply Low :Alarm indicating the XFP/OTX VCC2 power supply is lower than the threshold written in the EEPROM <Condtype> VCC2_LOW_ALARM_1 <Probcause>… |
| 1.3.6.1.4.1.20044.43.2.3.2.212.1.5 | Columnpm1004vencAlmVcc2HighAlarmPortn | read-only | current | VCC2 Power Supply High :Alarm indicating the XFP/OTX VCC2 power supply is higher than the threshold written in the EEPROM <Condtype> VCC2_HIGH_ALARM_1 <Probcau… |
| 1.3.6.1.4.1.20044.43.2.3.2.212.1.6 | Columnpm1004vencAlmVcc3LowAlarmPortn | read-only | current | VCC3 Power Supply Low :Alarm indicating the XFP/OTX VCC3 power supply is lower than the threshold written in the EEPROM <Condtype> VCC3_LOW_ALARM_1 <Probcause>… |
| 1.3.6.1.4.1.20044.43.2.3.2.212.1.7 | Columnpm1004vencAlmVcc3HighAlarmPortn | read-only | current | VCC3 Power Supply High :Alarm indicating the XFP/OTX VCC3 power supply is higher than the threshold written in the EEPROM <Condtype> VCC3_HIGH_ALARM_1 <Probcau… |
| 1.3.6.1.4.1.20044.43.2.3.2.212.1.8 | Columnpm1004vencAlmVcc5LowAlarmPortn | read-only | current | VCC5 Power Supply Low :Alarm indicating the XFP/OTX VCC5 power supply is lower than the threshold written in the EEPROM <Condtype> VCC5_LOW_ALARM_1 <Probcause>… |
| 1.3.6.1.4.1.20044.43.2.3.2.212.1.9 | Columnpm1004vencAlmVcc5HighAlarmPortn | read-only | current | VCC5 Power Supply High :Alarm indicating the XFP/OTX VCC5 power supply is higher than the threshold written in the EEPROM <Condtype> VCC5_HIGH_ALARM_1 <Probcau… |
| 1.3.6.1.4.1.20044.43.2.3.2.212.1.10 | Columnpm1004vencAlmVee5LowWarningPortn | read-only | current | VEE5 Power Supply Low Warning :Warning indicating the XFP/OTX VEE5 power supply is lower than the threshold written in the EEPROM <Condtype> VEE5_LOW_WARNING_1… |
| 1.3.6.1.4.1.20044.43.2.3.2.212.1.11 | Columnpm1004vencAlmVee5HighWarningPortn | read-only | current | VEE5 Power Supply High Warning :Warning indicating the XFP/OTX VEE5 power supply is higher than the threshold written in the EEPROM <Condtype> VEE5_HIGH_WARNIN… |
| 1.3.6.1.4.1.20044.43.2.3.2.212.1.12 | Columnpm1004vencAlmVcc2LowWarningPortn | read-only | current | VCC2 Power Supply Low Warning :Warning indicating the XFP/OTX VCC2 power supply is lower than the threshold written in the EEPROM <Condtype> VCC2_LOW_WARNING_1… |
| 1.3.6.1.4.1.20044.43.2.3.2.212.1.13 | Columnpm1004vencAlmVcc2HighWarningPortn | read-only | current | VCC2 Power Supply High Warning :Warning indicating the XFP/OTX VCC2 power supply is higher than the threshold written in the EEPROM <Condtype> VCC2_HIGH_WARNIN… |
| 1.3.6.1.4.1.20044.43.2.3.2.212.1.14 | Columnpm1004vencAlmVcc3LowWarningPortn | read-only | current | VCC3 Power Supply Low Warning :Warning indicating the XFP/OTX VCC3 power supply is lower than the threshold written in the EEPROM <Condtype> VCC3_LOW_WARNING_1… |
| 1.3.6.1.4.1.20044.43.2.3.2.212.1.15 | Columnpm1004vencAlmVcc3HighWarningPortn | read-only | current | VCC3 Power Supply High Warning :Warning indicating the XFP/OTX VCC3 power supply is higher than the threshold written in the EEPROM <Condtype> VCC3_HIGH_WARNIN… |
| 1.3.6.1.4.1.20044.43.2.3.2.212.1.16 | Columnpm1004vencAlmVcc5LowWarningPortn | read-only | current | VCC5 Power Supply Low Warning :Warning indicating the XFP/OTX VCC5 power supply is lower than the threshold written in the EEPROM <Condtype> VCC5_LOW_WARNING_1… |
| 1.3.6.1.4.1.20044.43.2.3.2.212.1.17 | Columnpm1004vencAlmVcc5HighWarningPortn | read-only | current | VCC5 Power Supply High Warning :Warning indicating the XFP/OTX VCC5 power supply is higher than the threshold written in the EEPROM <Condtype> VCC5_HIGH_WARNIN… |
| 1.3.6.1.4.1.20044.43.2.3.2.224 | Tablepm1004vencAlmlineOtx1TlhAlarmsTable | not-accessible | current | List of pm1004vencAlmlineOtx1TlhAlarms Article |
| 1.3.6.1.4.1.20044.43.2.3.2.224.1 | Rowpm1004vencAlmlineOtx1TlhAlarmsEntry | not-accessible | current | Row definition for the pm1004vencAlmlineOtx1TlhAlarms table |
| 1.3.6.1.4.1.20044.43.2.3.2.224.1.1 | Columnpm1004vencAlmlineOtx1TlhAlarmsIndex | read-only | current | Index definition for the pm1004vencAlmlineOtx1TlhAlarms table |
| 1.3.6.1.4.1.20044.43.2.3.2.224.1.6 | Columnpm1004vencAlmLineModulatorAgingHighAlaPortn | read-only | current | Line Modulator Aging High Alarm :Alarm indicating the Line OTX TLH modulator aging is higher than the threshold written in the EEPROM <Condtype> LINE_MODULATOR… |
| 1.3.6.1.4.1.20044.43.2.3.2.224.1.7 | Columnpm1004vencAlmLineAgingHighAlaPortn | read-only | current | Line OTX TLH Aging High Alarm :Alarm indicating the Line OTX TLH aging is higher than the threshold written in the EEPROM <Condtype> LINE_AGING_HIGH_ALA_1 |
| 1.3.6.1.4.1.20044.43.2.3.2.224.1.13 | Columnpm1004vencAlmLineFreqDevHighAlaPortn | read-only | current | Line Freq. Deviation High Alarm :Alarm indicating the Line OTX TLH frequency deviation is higher than the threshold written in the EEPROM <Condtype> LINE_FREQ_… |
| 1.3.6.1.4.1.20044.43.2.3.2.224.1.15 | Columnpm1004vencAlmLineLaserTempHighAlaPortn | read-only | current | Line Laser Temp. High Alarm :Alarm indicating the Line OTX TLH laser temperature is higher than the threshold written in the EEPROM <Condtype> LINE_LASER_TEMP_… |
| 1.3.6.1.4.1.20044.43.2.3.3 | Nodepm1004vencAlmLineCrit | |||
| 1.3.6.1.4.1.20044.43.2.3.3.7 | Tablepm1004vencAlmsynthAlmLineTable | not-accessible | current | List of pm1004vencAlmsynthAlmLine Article |
| 1.3.6.1.4.1.20044.43.2.3.3.7.1 | Rowpm1004vencAlmsynthAlmLineEntry | not-accessible | current | Row definition for the pm1004vencAlmsynthAlmLine table |
| 1.3.6.1.4.1.20044.43.2.3.3.7.1.1 | Columnpm1004vencAlmsynthAlmLineIndex | read-only | current | Index definition for the pm1004vencAlmsynthAlmLine table |
| 1.3.6.1.4.1.20044.43.2.3.3.7.1.2 | Columnpm1004vencAlmXfpAbsentPortn | read-only | current | Line Optical Module Absent :This OID indicates that the line optical interface (XFP or OTX) is not plugged in. <Help> This alarm indicates if the line transcei… |
| 1.3.6.1.4.1.20044.43.2.3.3.7.1.3 | Columnpm1004vencAlmXfpInitNotComplPortn | read-only | current | Line Optical Module Ready :This OID indicates that the optical interface (XFP or OTX) is not operational. <Help> This status indicates if the line transceiver … |
| 1.3.6.1.4.1.20044.43.2.3.3.7.1.5 | Columnpm1004vencAlmLineHwFailPortn | read-only | current | Line Port HW Failure :This OID indicates a failure on line port, most probably caused by a HW issue <Condtype> LINE_HW_FAIL <Probcause> equipmentMalfunction (1… |
| 1.3.6.1.4.1.20044.43.2.3.3.7.1.6 | Columnpm1004vencAlmXfpTxOffPortn | read-only | current | Line Optical Module Laser Shutdown :This OID indicates the line optical output power is on <Help> This status indicates if the line transceiver laser is ON or … |
| 1.3.6.1.4.1.20044.43.2.3.3.7.1.7 | Columnpm1004vencAlmLineLocalOosPortn | read-only | current | Line Port In Service :This OID indicates that the Line port is In Service (1) of Out or Service (2) <Help> This status indicates if the line port is in service… |
| 1.3.6.1.4.1.20044.43.2.3.3.7.1.10 | Columnpm1004vencAlmLineDdmWarningPortn | read-only | current | Warning On Line Optical Module DDM :This OID indicates a warning is present coming out of Line optical interface DDM <Help> This alarm indicates if a DDM Warni… |
| 1.3.6.1.4.1.20044.43.2.3.3.7.1.11 | Columnpm1004vencAlmLineDdmAlmPortn | read-only | current | Alarm On Line Optical Module DDM :This OID indicates an alarm is present coming out of Line optical interface DDM <Help> This alarm indicates if a DDM Alarm ha… |
| 1.3.6.1.4.1.20044.43.2.3.3.7.1.12 | Columnpm1004vencAlmLineDdmCritPortn | read-only | current | Custom Alarm On Line XFP/OTX DDM :This OID indicates a Custom alarm is present coming out of Line optical interface DDM <Help> This alarm indicates if a DDM Cu… |
| 1.3.6.1.4.1.20044.43.2.3.3.7.1.13 | Columnpm1004vencAlmLineFailPortn | read-only | current | Line Port Failure :This OID indicates a failure on the line port <Condtype> LINE_FAIL <Probcause> equipmentMalfunction (16) <Alarmtype> synthesisAlarm (12) <Po… |
| 1.3.6.1.4.1.20044.43.2.3.3.7.1.17 | Columnpm1004vencAlmLineActivePortn | read-only | current | Line Active :This bit indicates the line #n is active on receive side <Help> This status indicates whether the line is active or standby. <Condtype> LINE_ACTIV… |
| 1.3.6.1.4.1.20044.43.2.3.3.128 | Tablepm1004vencAlmdfrmAlmTable | not-accessible | current | List of pm1004vencAlmdfrmAlm Article |
| 1.3.6.1.4.1.20044.43.2.3.3.128.1 | Rowpm1004vencAlmdfrmAlmEntry | not-accessible | current | Row definition for the pm1004vencAlmdfrmAlm table |
| 1.3.6.1.4.1.20044.43.2.3.3.128.1.1 | Columnpm1004vencAlmdfrmAlmIndex | read-only | current | Index definition for the pm1004vencAlmdfrmAlm table |
| 1.3.6.1.4.1.20044.43.2.3.3.128.1.5 | Columnpm1004vencAlmLineLossofsyncPortn | read-only | current | Loss Of Synchronisation :This OID indicates the upstream line input port is in Loss of Synchronization. <Help> This alarms indicates if the input signal is cor… |
| 1.3.6.1.4.1.20044.43.2.3.3.133 | Tablepm1004vencAlmlineSyncAlarmsTable | not-accessible | current | List of pm1004vencAlmlineSyncAlarms Article |
| 1.3.6.1.4.1.20044.43.2.3.3.133.1 | Rowpm1004vencAlmlineSyncAlarmsEntry | not-accessible | current | Row definition for the pm1004vencAlmlineSyncAlarms table |
| 1.3.6.1.4.1.20044.43.2.3.3.133.1.1 | Columnpm1004vencAlmlineSyncAlarmsIndex | read-only | current | Index definition for the pm1004vencAlmlineSyncAlarms table |
| 1.3.6.1.4.1.20044.43.2.3.3.133.1.13 | Columnpm1004vencAlmDwLockerrPortn | read-only | current | Downstream Clock Lock Error :This OID indicates that the deserializer input 10 Gb/s clock recovery is not locked. <Condtype> DW_LOCKERR <Probcause> receiveFail… |
| 1.3.6.1.4.1.20044.43.2.3.3.133.1.14 | Columnpm1004vencAlmUpLockerrPortn | read-only | current | Upstream Clock Lock Error :This OID indicates that the serializer output 10 Gb/s clock multiplier unit is not locked. <Condtype> UP_LOCKERR <Probcause> receive… |
| 1.3.6.1.4.1.20044.43.2.3.3.133.1.17 | Columnpm1004vencAlmDwLosPortn | read-only | current | Line Input Loss Of Signal :This OID indicates a loss of signal on the 10 Gb/s input. <Help> This alarm indicates if an optical signal is detected on the line t… |
| 1.3.6.1.4.1.20044.43.2.3.3.211 | Tablepm1004vencAlmlineXfp1AlarmsTable | not-accessible | current | List of pm1004vencAlmlineXfp1Alarms Article |
| 1.3.6.1.4.1.20044.43.2.3.3.211.1 | Rowpm1004vencAlmlineXfp1AlarmsEntry | not-accessible | current | Row definition for the pm1004vencAlmlineXfp1Alarms table |
| 1.3.6.1.4.1.20044.43.2.3.3.211.1.1 | Columnpm1004vencAlmlineXfp1AlarmsIndex | read-only | current | Index definition for the pm1004vencAlmlineXfp1Alarms table |
| 1.3.6.1.4.1.20044.43.2.3.3.211.1.3 | Columnpm1004vencAlmModNrPortn | read-only | current | Line Optical Module Not Ready :This OID indicates that the module is unable to determine correct data. <Help> This alarm indicates if the line transceiver is r… |
| 1.3.6.1.4.1.20044.43.2.3.3.211.1.4 | Columnpm1004vencAlmRxCdrNotLockedPortn | read-only | current | Line Optical Rx CDR Unlocked :This OID indicates that a loss of lock on the receiving side CDR has been detected <Help> This alarm indicates if the Rx CDR is l… |
| 1.3.6.1.4.1.20044.43.2.3.3.211.1.6 | Columnpm1004vencAlmRxNrPortn | read-only | current | Line Optical Rx Not Ready :This OID indicates that a condition has arisen leading to invalid data on the receiving side. <Help> This alarm indicates if the Rx … |
| 1.3.6.1.4.1.20044.43.2.3.3.211.1.7 | Columnpm1004vencAlmTxCdrNotLockedPortn | read-only | current | Line Optical Tx CDR Unlocked :This OID indicates a loss of lock on the transmitting side CDR has been detected. <Help> This alarm indicates if the Tx CDR is lo… |
| 1.3.6.1.4.1.20044.43.2.3.3.211.1.8 | Columnpm1004vencAlmTxFaultPortn | read-only | current | Line Optical Tx Failure :This OID indicates a fault condition on the laser detected by the safety syste <Help> This alarm indicates if the laser of the line tr… |
| 1.3.6.1.4.1.20044.43.2.3.3.211.1.9 | Columnpm1004vencAlmTxNrPortn | read-only | current | Line Optical Tx Not Ready :This OID indicates a condition has arisen leading to invalid data on the transmitting side <Help> This alarm indicates if the Tx par… |
| 1.3.6.1.4.1.20044.43.2.3.3.211.1.15 | Columnpm1004vencAlmWavelengthUnlockedPortn | read-only | current | Line Optical Tx Wavelength Unlocked :This OID indicates that the wavelength error is exceeding the manufacturer tolerance <Help> This alarm indicates if the wa… |
| 1.3.6.1.4.1.20044.43.2.3.3.211.1.16 | Columnpm1004vencAlmTecFaultPortn | read-only | current | Line Optical Tx Temp Regul Failed :This OID indicates a failure on the TEC module <Help> This alarm indicates if the TEC of the line transceiver is in fail con… |
| 1.3.6.1.4.1.20044.43.2.3.3.211.1.17 | Columnpm1004vencAlmApdSupplyFaultPortn | read-only | current | Line Rx Photodiode Power Failed :This OID indicates a failure on the APD power supply <Help> This alarm indicates if the APD power supply is in fail condition … |
| 1.3.6.1.4.1.20044.43.3 | Nodepm1004vencmeasures | |||
| 1.3.6.1.4.1.20044.43.3.1 | Nodepm1004vencMesrOther | |||
| 1.3.6.1.4.1.20044.43.3.1.0 | Scalarpm1004vencMesrsynth0 | read-only | deprecated | Not Used :This OID gives the unit used on AUX1 measurement of XFP#1 (Unit = ) |
| 1.3.6.1.4.1.20044.43.3.1.1 | Scalarpm1004vencMesrsynth1 | read-only | deprecated | Not Used :This OID gives the unit used on AUX2 measurement of XFP#1 (Unit = ) |
| 1.3.6.1.4.1.20044.43.3.2 | Nodepm1004vencMesrClient | |||
| 1.3.6.1.4.1.20044.43.3.3 | Nodepm1004vencMesrLine | |||
| 1.3.6.1.4.1.20044.43.3.3.208 | Tablepm1004vencMesrxfp1LxModTempMeasTable | not-accessible | current | List of pm1004vencMesrxfp1LxModTempMeas Article |
| 1.3.6.1.4.1.20044.43.3.3.208.1 | Rowpm1004vencMesrxfp1LxModTempMeasEntry | not-accessible | current | Row definition for the pm1004vencMesrxfp1LxModTempMeas table |
| 1.3.6.1.4.1.20044.43.3.3.208.1.1 | Columnpm1004vencMesrxfp1LxModTempMeasIndex | read-only | current | Index definition for the pm1004vencMesrxfp1LxModTempMeas table |
| 1.3.6.1.4.1.20044.43.3.3.208.1.2 | Columnpm1004vencMesrxfp1LxModTempMeasPortn | read-only | current | Line Optical Module Temperature :This OID gives the temperature of the XFP or OTX plugged in line#n, read from the DDM (Digital Diagnostic Monitoring) (Tempera… |
| 1.3.6.1.4.1.20044.43.3.3.209 | Tablepm1004vencMesrxfp1ReservedTable | not-accessible | deprecated | List of pm1004vencMesrxfp1Reserved Article |
| 1.3.6.1.4.1.20044.43.3.3.209.1 | Rowpm1004vencMesrxfp1ReservedEntry | not-accessible | deprecated | Row definition for the pm1004vencMesrxfp1Reserved table |
| 1.3.6.1.4.1.20044.43.3.3.209.1.1 | Columnpm1004vencMesrxfp1ReservedIndex | read-only | deprecated | Index definition for the pm1004vencMesrxfp1Reserved table |
| 1.3.6.1.4.1.20044.43.3.3.209.1.2 | Columnpm1004vencMesrxfp1ReservedPortn | read-only | deprecated | Not Used :Reserved |
| 1.3.6.1.4.1.20044.43.3.3.210 | Tablepm1004vencMesrxfp1LoBiasCurrentMeasTable | not-accessible | current | List of pm1004vencMesrxfp1LoBiasCurrentMeas Article |
| 1.3.6.1.4.1.20044.43.3.3.210.1 | Rowpm1004vencMesrxfp1LoBiasCurrentMeasEntry | not-accessible | current | Row definition for the pm1004vencMesrxfp1LoBiasCurrentMeas table |
| 1.3.6.1.4.1.20044.43.3.3.210.1.1 | Columnpm1004vencMesrxfp1LoBiasCurrentMeasIndex | read-only | current | Index definition for the pm1004vencMesrxfp1LoBiasCurrentMeas table |
| 1.3.6.1.4.1.20044.43.3.3.210.1.2 | Columnpm1004vencMesrxfp1LoBiasCurrentMeasPortn | read-only | current | Line Optical Module Laser Bias :This OID gives the bias value of the XFP or OTX plugged in line #n, read from the DDM (Digital Diagnostic Monitoring) (Bias = A… |
| 1.3.6.1.4.1.20044.43.3.3.211 | Tablepm1004vencMesrxfp1LoTxPowerMeasTable | not-accessible | current | List of pm1004vencMesrxfp1LoTxPowerMeas Article |
| 1.3.6.1.4.1.20044.43.3.3.211.1 | Rowpm1004vencMesrxfp1LoTxPowerMeasEntry | not-accessible | current | Row definition for the pm1004vencMesrxfp1LoTxPowerMeas table |
| 1.3.6.1.4.1.20044.43.3.3.211.1.1 | Columnpm1004vencMesrxfp1LoTxPowerMeasIndex | read-only | current | Index definition for the pm1004vencMesrxfp1LoTxPowerMeas table |
| 1.3.6.1.4.1.20044.43.3.3.211.1.2 | Columnpm1004vencMesrxfp1LoTxPowerMeasPortn | read-only | current | Line Optical Module Tx Power :This OID gives the transmit power value of the XFP or OTX plugged in line #n, read from the DDM (Digital Diagnostic Monitoring) (… |
| 1.3.6.1.4.1.20044.43.3.3.212 | Tablepm1004vencMesrxfp1LiRxPowerMeasTable | not-accessible | current | List of pm1004vencMesrxfp1LiRxPowerMeas Article |
| 1.3.6.1.4.1.20044.43.3.3.212.1 | Rowpm1004vencMesrxfp1LiRxPowerMeasEntry | not-accessible | current | Row definition for the pm1004vencMesrxfp1LiRxPowerMeas table |
| 1.3.6.1.4.1.20044.43.3.3.212.1.1 | Columnpm1004vencMesrxfp1LiRxPowerMeasIndex | read-only | current | Index definition for the pm1004vencMesrxfp1LiRxPowerMeas table |
| 1.3.6.1.4.1.20044.43.3.3.212.1.2 | Columnpm1004vencMesrxfp1LiRxPowerMeasPortn | read-only | current | Line Optical Module Rx Power :This OID gives the receive power value of the XFP or OTX plugged in line #n, read from the DDM (Digital Diagnostic Monitoring) (P… |
| 1.3.6.1.4.1.20044.43.3.3.213 | Tablepm1004vencMesrxfp1LxAux1MeasTable | not-accessible | deprecated | List of pm1004vencMesrxfp1LxAux1Meas Article |
| 1.3.6.1.4.1.20044.43.3.3.213.1 | Rowpm1004vencMesrxfp1LxAux1MeasEntry | not-accessible | deprecated | Row definition for the pm1004vencMesrxfp1LxAux1Meas table |
| 1.3.6.1.4.1.20044.43.3.3.213.1.1 | Columnpm1004vencMesrxfp1LxAux1MeasIndex | read-only | deprecated | Index definition for the pm1004vencMesrxfp1LxAux1Meas table |
| 1.3.6.1.4.1.20044.43.3.3.213.1.2 | Columnpm1004vencMesrxfp1LxAux1MeasPortn | read-only | deprecated | Not Used :This OID gives the receive power value read in the DDM (Digital Diagnostic Monitoring) of the XFP or OTX plugged in line #n (Unit = ?) |
| 1.3.6.1.4.1.20044.43.3.3.214 | Tablepm1004vencMesrxfp1LxAux2MeasTable | not-accessible | deprecated | List of pm1004vencMesrxfp1LxAux2Meas Article |
| 1.3.6.1.4.1.20044.43.3.3.214.1 | Rowpm1004vencMesrxfp1LxAux2MeasEntry | not-accessible | deprecated | Row definition for the pm1004vencMesrxfp1LxAux2Meas table |
| 1.3.6.1.4.1.20044.43.3.3.214.1.1 | Columnpm1004vencMesrxfp1LxAux2MeasIndex | read-only | deprecated | Index definition for the pm1004vencMesrxfp1LxAux2Meas table |
| 1.3.6.1.4.1.20044.43.3.3.214.1.2 | Columnpm1004vencMesrxfp1LxAux2MeasPortn | read-only | deprecated | Not Used :This OID gives the receive power value read in the DDM (Digital Diagnostic Monitoring) of the XFP or OTX plugged in line #n (Unit = ?) |
| 1.3.6.1.4.1.20044.43.3.3.224 | Tablepm1004vencMesrotx1AgingTable | not-accessible | current | List of pm1004vencMesrotx1Aging Article |
| 1.3.6.1.4.1.20044.43.3.3.224.1 | Rowpm1004vencMesrotx1AgingEntry | not-accessible | current | Row definition for the pm1004vencMesrotx1Aging table |
| 1.3.6.1.4.1.20044.43.3.3.224.1.1 | Columnpm1004vencMesrotx1AgingIndex | read-only | current | Index definition for the pm1004vencMesrotx1Aging table |
| 1.3.6.1.4.1.20044.43.3.3.224.1.2 | Columnpm1004vencMesrotx1AgingPortn | read-only | current | Line OTX TLH Aging :This OID gives the aging of the Line OTX TLH, read from the DDM (Digital Diagnostic Monitoring) (Aging = AV) (Unit = %) <Help> This measure… |
| 1.3.6.1.4.1.20044.43.3.3.225 | Tablepm1004vencMesrotx1LaserTemperatureTable | not-accessible | deprecated | List of pm1004vencMesrotx1LaserTemperature Article |
| 1.3.6.1.4.1.20044.43.3.3.225.1 | Rowpm1004vencMesrotx1LaserTemperatureEntry | not-accessible | deprecated | Row definition for the pm1004vencMesrotx1LaserTemperature table |
| 1.3.6.1.4.1.20044.43.3.3.225.1.1 | Columnpm1004vencMesrotx1LaserTemperatureIndex | read-only | deprecated | Index definition for the pm1004vencMesrotx1LaserTemperature table |
| 1.3.6.1.4.1.20044.43.3.3.225.1.2 | Columnpm1004vencMesrotx1LaserTemperaturePortn | read-only | deprecated | Line OTX TLH Laser Temperature :This OID gives the laser temperature of the Line OTX TLH, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/2… |
| 1.3.6.1.4.1.20044.43.3.3.226 | Tablepm1004vencMesrotx1FreqDeviationTable | not-accessible | current | List of pm1004vencMesrotx1FreqDeviation Article |
| 1.3.6.1.4.1.20044.43.3.3.226.1 | Rowpm1004vencMesrotx1FreqDeviationEntry | not-accessible | current | Row definition for the pm1004vencMesrotx1FreqDeviation table |
| 1.3.6.1.4.1.20044.43.3.3.226.1.1 | Columnpm1004vencMesrotx1FreqDeviationIndex | read-only | current | Index definition for the pm1004vencMesrotx1FreqDeviation table |
| 1.3.6.1.4.1.20044.43.3.3.226.1.2 | Columnpm1004vencMesrotx1FreqDeviationPortn | read-only | current | Line OTX TLH Frequency Deviation :This OID gives the frequency deviation of the Line OTX TLH, read from the DDM (Digital Diagnostic Monitoring) (Deviation = (A… |
| 1.3.6.1.4.1.20044.43.3.3.227 | Tablepm1004vencMesrotx1LaserWvlengthTable | not-accessible | current | List of pm1004vencMesrotx1LaserWvlength Article |
| 1.3.6.1.4.1.20044.43.3.3.227.1 | Rowpm1004vencMesrotx1LaserWvlengthEntry | not-accessible | current | Row definition for the pm1004vencMesrotx1LaserWvlength table |
| 1.3.6.1.4.1.20044.43.3.3.227.1.1 | Columnpm1004vencMesrotx1LaserWvlengthIndex | read-only | current | Index definition for the pm1004vencMesrotx1LaserWvlength table |
| 1.3.6.1.4.1.20044.43.3.3.227.1.2 | Columnpm1004vencMesrotx1LaserWvlengthPortn | read-only | current | Line Optical Module Wavelength :This OID gives the laser wavelength of the Line OTX TLH, read from the DDM (Digital Diagnostic Monitoring) (Wavelength=29979245… |
| 1.3.6.1.4.1.20044.43.4 | Nodepm1004venccounters | |||
| 1.3.6.1.4.1.20044.43.4.1 | Nodepm1004vencCntOther | |||
| 1.3.6.1.4.1.20044.43.4.2 | Nodepm1004vencCntClient | |||
| 1.3.6.1.4.1.20044.43.4.3 | Nodepm1004vencCntLine | |||
| 1.3.6.1.4.1.20044.43.4.3.152 | Tablepm1004vencCntdfrmB1ErrCntTable | not-accessible | current | List of pm1004vencCntdfrmB1ErrCnt Article |
| 1.3.6.1.4.1.20044.43.4.3.152.1 | Rowpm1004vencCntdfrmB1ErrCntEntry | not-accessible | current | Row definition for the pm1004vencCntdfrmB1ErrCnt table |
| 1.3.6.1.4.1.20044.43.4.3.152.1.1 | Columnpm1004vencCntdfrmB1ErrCntIndex | read-only | current | Index definition for the pm1004vencCntdfrmB1ErrCnt table |
| 1.3.6.1.4.1.20044.43.4.3.152.1.2 | Columnpm1004vencCntdfrmB1ErrCntValuePortn | read-only | current | Line Input SM-BIP8 Errors :This counter is incremented each time a B1 error is detected on the Deframer input stream. <Help> This counter gives the number of B… |
| 1.3.6.1.4.1.20044.43.4.3.152.1.3 | Columnpm1004vencCntdfrmB1ErrCntErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the B1 error counter value is invalid on Port |
| 1.3.6.1.4.1.20044.43.4.3.152.1.4 | Columnpm1004vencCntdfrmB1ErrCntOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a B1 error counter overload on Port |
| 1.3.6.1.4.1.20044.43.4.3.153 | Tablepm1004vencCntdfrmTimCntTable | not-accessible | current | List of pm1004vencCntdfrmTimCnt Article |
| 1.3.6.1.4.1.20044.43.4.3.153.1 | Rowpm1004vencCntdfrmTimCntEntry | not-accessible | current | Row definition for the pm1004vencCntdfrmTimCnt table |
| 1.3.6.1.4.1.20044.43.4.3.153.1.1 | Columnpm1004vencCntdfrmTimCntIndex | read-only | current | Index definition for the pm1004vencCntdfrmTimCnt table |
| 1.3.6.1.4.1.20044.43.4.3.153.1.2 | Columnpm1004vencCntdfrmTimCntValuePortn | read-only | current | Line Timer Counter :This is the timing counter dedicated to the downstream deframer counters. It is incremented every 125 us. |
| 1.3.6.1.4.1.20044.43.4.3.153.1.3 | Columnpm1004vencCntdfrmTimCntErrorPortn | read-only | current | Line Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port |
| 1.3.6.1.4.1.20044.43.4.3.153.1.4 | Columnpm1004vencCntdfrmTimCntOverloadPortn | read-only | current | Line Counter Overload :This OID when set indicates a deframer timer counter overload on Port |
| 1.3.6.1.4.1.20044.43.4.259 | Scalarpm1004vencCntCountersReset | read-write | current | Counters Reset:This OID resets and restarts all the counters |
| 1.3.6.1.4.1.20044.43.4.260 | Scalarpm1004vencCntCountersStop | read-write | current | Counters stop:This OID stops all the counters |
| 1.3.6.1.4.1.20044.43.6 | Nodepm1004venccontrolsWrite | |||
| 1.3.6.1.4.1.20044.43.6.1 | Nodepm1004vencCtrlOther | |||
| 1.3.6.1.4.1.20044.43.6.1.1 | Nodepm1004vencCtrlconfMgnt1 | |||
| 1.3.6.1.4.1.20044.43.6.1.1.1 | Scalarpm1004vencCtrlConf1Load1 | read-write | current | Load Configuration Tables Set Nb 1 :When set this OID enables loading from flash configuration1 into the PM. |
| 1.3.6.1.4.1.20044.43.6.1.1.2 | Scalarpm1004vencCtrlConf2Load1 | read-write | current | Load Configuration Tables Set Nb 2 :When set this OID enables loading from flash configuration2 into the PM. |
| 1.3.6.1.4.1.20044.43.6.1.1.10 | Scalarpm1004vencCtrlConf2Flash1 | read-write | current | Write Configuration Tables :This OID saves the current configuration of the PM as configuration2 in the flash. <Help> This control saves the customer configura… |
| 1.3.6.1.4.1.20044.43.6.1.1.14 | Scalarpm1004vencCtrlConf2Clear1 | read-write | current | Clear Configuration Tables :This OID clears the configuration tables from configuration2 in the flash. <Help> This control restores the default configuration o… |
| 1.3.6.1.4.1.20044.43.6.1.4 | Nodepm1004vencCtrlsynth4 | |||
| 1.3.6.1.4.1.20044.43.6.1.4.1 | Scalarpm1004vencCtrlCorrelatOn | read-write | current | Enable Alarm Correlation :This OID enables the alarm correlation in the PM. |
| 1.3.6.1.4.1.20044.43.6.1.4.2 | Scalarpm1004vencCtrlCorrelatOff | read-write | current | Disable Alarm Correlation :This OID disables the alarm correlation in the PM. |
| 1.3.6.1.4.1.20044.43.6.1.5 | Nodepm1004vencCtrlswMgnt | |||
| 1.3.6.1.4.1.20044.43.6.1.5.2 | Scalarpm1004vencCtrlColdReset | read-write | current | PM Cold Reset :This OID, when set, causes a cold reset of the PM. This reset is traffic affecting, and the configuration of PM is reloaded on start-up. <Help> … |
| 1.3.6.1.4.1.20044.43.6.1.5.3 | Scalarpm1004vencCtrlWarmReset | read-write | current | PM Warm Reset :This OID, when set, causes a warm reset of the PM. This reset is not traffic affecting, and the configuration of PM remains unchanged. <Help> Th… |
| 1.3.6.1.4.1.20044.43.6.1.5.5 | Scalarpm1004vencCtrlLoadSwBank1 | read-write | current | Set Software Nb 1 As Active :This OID, when set, loads the SW from bank1 into the PM. It must be followed by a reset. <Help> This controls selects the first SW… |
| 1.3.6.1.4.1.20044.43.6.1.5.6 | Scalarpm1004vencCtrlLoadSwBank2 | read-write | current | Set Software Nb 2 As Active :This OID, when set, loads the SW from bank2 into the PM. It must be followed by a reset. <Help> This controls selects the second S… |
| 1.3.6.1.4.1.20044.43.6.1.6 | Nodepm1004vencCtrlgwMgnt | |||
| 1.3.6.1.4.1.20044.43.6.1.6.1 | Scalarpm1004vencCtrlCurrentGwReset | read-write | current | Active Gateware Reset :This OID, when set, resets the active gateware. It is traffic affecting. |
| 1.3.6.1.4.1.20044.43.6.1.6.5 | Scalarpm1004vencCtrlLoadGwBank1 | read-write | current | Set Gateware Nb 1 As Active :This OID, when set, loads the GW from bank1 (Flash) into the PM. It is followed by an automatic gateware cold reset. <Help> This c… |
| 1.3.6.1.4.1.20044.43.6.1.6.6 | Scalarpm1004vencCtrlLoadGwBank2 | read-write | current | Set Gateware Nb 2 As Active :This OID, when set, loads the GW from bank2 (Flash) into the PM. It is followed by an automatic gateware cold reset. |
| 1.3.6.1.4.1.20044.43.6.1.6.7 | Scalarpm1004vencCtrlLoadGwBank3 | read-write | current | Set Gateware Nb 3 As Active :This OID, when set, loads the GW from bank3 (Flash) into the PM. It is followed by an automatic gateware cold reset. <Help> This c… |
| 1.3.6.1.4.1.20044.43.6.1.6.8 | Scalarpm1004vencCtrlLoadGwBank4 | read-write | current | Set Gateware Nb 4 As Active :This OID, when set, loads the GW from bank4 (Flash) into the PM. It is followed by an automatic gateware cold reset. |
| 1.3.6.1.4.1.20044.43.6.1.192 | Nodepm1004vencCtrlledTest | |||
| 1.3.6.1.4.1.20044.43.6.1.192.1 | Scalarpm1004vencCtrlGreenLed | read-write | current | Green Leds Test :This OID switches on all the green Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to green |
| 1.3.6.1.4.1.20044.43.6.1.192.2 | Scalarpm1004vencCtrlRedLed | read-write | current | Red Leds Test :This OID switches on all the red Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to red |
| 1.3.6.1.4.1.20044.43.6.1.192.3 | Scalarpm1004vencCtrlLedOff | read-write | current | Leds Off :This OID switches off all the Leds as a test feature. <Help> This control initiates a test leds turning all the LEDs to OFF |
| 1.3.6.1.4.1.20044.43.6.1.193 | Nodepm1004vencCtrlmoduleOosMode | |||
| 1.3.6.1.4.1.20044.43.6.1.193.1 | Scalarpm1004vencCtrlModuleOosMode | read-write | current | PM Out Of Service :This OID sets the PM Out Of Service <Help> This control defines the service state of the complete module |
| 1.3.6.1.4.1.20044.43.6.1.197 | Nodepm1004vencCtrlmaintenanceMode | |||
| 1.3.6.1.4.1.20044.43.6.1.197.1 | Scalarpm1004vencCtrlMaintenanceMode | read-write | current | Enable Maintenance :This OID enables the maintenance mode on the PM. <Help> This control enables the maintenance mode on the PM. |
| 1.3.6.1.4.1.20044.43.6.1.200 | Scalarpm1004vencCtrlencryptionSelect | read-write | current | Encryption Key Selection :This OID selects the key (first key:0 or second key:1) to use to encrypt/decrypt the video stream. <Help> This control selects the ke… |
| 1.3.6.1.4.1.20044.43.6.2 | Nodepm1004vencCtrlClient | |||
| 1.3.6.1.4.1.20044.43.6.2.16 | Tablepm1004vencCtrlaccessLoopTable | not-accessible | current | List of pm1004vencCtrlaccessLoop Article |
| 1.3.6.1.4.1.20044.43.6.2.16.1 | Rowpm1004vencCtrlaccessLoopEntry | not-accessible | current | Row definition for the pm1004vencCtrlaccessLoop table |
| 1.3.6.1.4.1.20044.43.6.2.16.1.1 | Columnpm1004vencCtrlaccessLoopIndex | read-only | current | Index definition for the pm1004vencCtrlaccessLoop table |
| 1.3.6.1.4.1.20044.43.6.2.16.1.2 | Columnpm1004vencCtrlaccessLoopPortn | read-write | current | Client Facility Loopback :This OID operates a Client Facility Loopback, looping client input signal on the client output port. The loop is located on the clien… |
| 1.3.6.1.4.1.20044.43.6.2.18 | Tablepm1004vencCtrlportOosModeTable | not-accessible | current | List of pm1004vencCtrlportOosMode Article |
| 1.3.6.1.4.1.20044.43.6.2.18.1 | Rowpm1004vencCtrlportOosModeEntry | not-accessible | current | Row definition for the pm1004vencCtrlportOosMode table |
| 1.3.6.1.4.1.20044.43.6.2.18.1.1 | Columnpm1004vencCtrlportOosModeIndex | read-only | current | Index definition for the pm1004vencCtrlportOosMode table |
| 1.3.6.1.4.1.20044.43.6.2.18.1.2 | Columnpm1004vencCtrlportOosModePortn | read-write | current | Client Out Of Service :This OID sets the Service state of the client port (In Service, Tx Out of Service, Rx Out of Service or Port (Rx and Tx) Out of Service)… |
| 1.3.6.1.4.1.20044.43.6.2.20 | Tablepm1004vencCtrlsfpOffCtrlTable | not-accessible | current | List of pm1004vencCtrlsfpOffCtrl Article |
| 1.3.6.1.4.1.20044.43.6.2.20.1 | Rowpm1004vencCtrlsfpOffCtrlEntry | not-accessible | current | Row definition for the pm1004vencCtrlsfpOffCtrl table |
| 1.3.6.1.4.1.20044.43.6.2.20.1.1 | Columnpm1004vencCtrlsfpOffCtrlIndex | read-only | current | Index definition for the pm1004vencCtrlsfpOffCtrl table |
| 1.3.6.1.4.1.20044.43.6.2.20.1.2 | Columnpm1004vencCtrlsfpOffCtrlPortn | read-write | current | Signal OFF :This OID switches off the SFP. <Help> This control defines the laser state of the client transceiver |
| 1.3.6.1.4.1.20044.43.6.2.21 | Tablepm1004vencCtrlcsfUpInsTable | not-accessible | current | List of pm1004vencCtrlcsfUpIns Article |
| 1.3.6.1.4.1.20044.43.6.2.21.1 | Rowpm1004vencCtrlcsfUpInsEntry | not-accessible | current | Row definition for the pm1004vencCtrlcsfUpIns table |
| 1.3.6.1.4.1.20044.43.6.2.21.1.1 | Columnpm1004vencCtrlcsfUpInsIndex | read-only | current | Index definition for the pm1004vencCtrlcsfUpIns table |
| 1.3.6.1.4.1.20044.43.6.2.21.1.2 | Columnpm1004vencCtrlcsfUpInsPortn | read-write | current | Client Signal Fail Insertion :This OID, when set, inserts a client signal fail in the upstream client Port. <Help> This control inserts a Client Signal Fail fo… |
| 1.3.6.1.4.1.20044.43.6.2.22 | Tablepm1004vencCtrlcaisDwInsTable | not-accessible | current | List of pm1004vencCtrlcaisDwIns Article |
| 1.3.6.1.4.1.20044.43.6.2.22.1 | Rowpm1004vencCtrlcaisDwInsEntry | not-accessible | current | Row definition for the pm1004vencCtrlcaisDwIns table |
| 1.3.6.1.4.1.20044.43.6.2.22.1.1 | Columnpm1004vencCtrlcaisDwInsIndex | read-only | current | Index definition for the pm1004vencCtrlcaisDwIns table |
| 1.3.6.1.4.1.20044.43.6.2.22.1.2 | Columnpm1004vencCtrlcaisDwInsPortn | read-write | current | Client AIS Insertion :This OID, when set, inserts a client AIS on the downstream client Port. <Help> This control inserts a Client AIS for the client port |
| 1.3.6.1.4.1.20044.43.6.2.26 | Tablepm1004vencCtrlclientAccessTermLoopTable | not-accessible | current | List of pm1004vencCtrlclientAccessTermLoop Article |
| 1.3.6.1.4.1.20044.43.6.2.26.1 | Rowpm1004vencCtrlclientAccessTermLoopEntry | not-accessible | current | Row definition for the pm1004vencCtrlclientAccessTermLoop table |
| 1.3.6.1.4.1.20044.43.6.2.26.1.1 | Columnpm1004vencCtrlclientAccessTermLoopIndex | read-only | current | Index definition for the pm1004vencCtrlclientAccessTermLoop table |
| 1.3.6.1.4.1.20044.43.6.2.26.1.2 | Columnpm1004vencCtrlclientAccessTermLoopPortn | read-write | current | Client Terminal Loopback :This OID operates a Client Terminal Loopback, looping client input signal on the client output port. The loop is located on the line … |
| 1.3.6.1.4.1.20044.43.6.2.43 | Tablepm1004vencCtrlrxVideoProtocolTable | not-accessible | current | List of pm1004vencCtrlrxVideoProtocol Article |
| 1.3.6.1.4.1.20044.43.6.2.43.1 | Rowpm1004vencCtrlrxVideoProtocolEntry | not-accessible | current | Row definition for the pm1004vencCtrlrxVideoProtocol table |
| 1.3.6.1.4.1.20044.43.6.2.43.1.1 | Columnpm1004vencCtrlrxVideoProtocolIndex | read-only | current | Index definition for the pm1004vencCtrlrxVideoProtocol table |
| 1.3.6.1.4.1.20044.43.6.2.43.1.2 | Columnpm1004vencCtrlrxVideoProtocolPortn | read-write | current | Force DVB ASI On RX Side :This OID selects the DVB ASI protocol on the client port and disable the auto-sensing feature <Help> This control selects the DVB ASI… |
| 1.3.6.1.4.1.20044.43.6.2.128 | Tablepm1004vencCtrladddropClientRxProtectTable | not-accessible | current | List of pm1004vencCtrladddropClientRxProtect Article |
| 1.3.6.1.4.1.20044.43.6.2.128.1 | Rowpm1004vencCtrladddropClientRxProtectEntry | not-accessible | current | Row definition for the pm1004vencCtrladddropClientRxProtect table |
| 1.3.6.1.4.1.20044.43.6.2.128.1.1 | Columnpm1004vencCtrladddropClientRxProtectIndex | read-only | current | Index definition for the pm1004vencCtrladddropClientRxProtect table |
| 1.3.6.1.4.1.20044.43.6.2.128.1.2 | Columnpm1004vencCtrladddropClientRxProtectPortn | read-write | current | Client Switch Mode :This bit selects the manual (1) or automatic (0) switch method <Help> This control defines the protection switch mode on the client interfa… |
| 1.3.6.1.4.1.20044.43.6.2.136 | Tablepm1004vencCtrladddropTsClientModeTable | not-accessible | current | List of pm1004vencCtrladddropTsClientMode Article |
| 1.3.6.1.4.1.20044.43.6.2.136.1 | Rowpm1004vencCtrladddropTsClientModeEntry | not-accessible | current | Row definition for the pm1004vencCtrladddropTsClientMode table |
| 1.3.6.1.4.1.20044.43.6.2.136.1.1 | Columnpm1004vencCtrladddropTsClientModeIndex | read-only | current | Index definition for the pm1004vencCtrladddropTsClientMode table |
| 1.3.6.1.4.1.20044.43.6.2.136.1.2 | Columnpm1004vencCtrladddropTsClientModePortn | read-write | current | Client Mode :This OID selects the mode on the client <Help> This control defines the mode (Add/Drop or Split&Select) of the Client |
| 1.3.6.1.4.1.20044.43.6.3 | Nodepm1004vencCtrlLine | |||
| 1.3.6.1.4.1.20044.43.6.3.64 | Nodepm1004vencCtrlcommAccessLoop | |||
| 1.3.6.1.4.1.20044.43.6.3.64.1 | Scalarpm1004vencCtrlCommAccessloop | read-write | deprecated | PM Full Access Loop Mode :This OID, when set, puts the module in common access loop back, looping the 10 Gb/s output signal on the 10 Gb/s input. |
| 1.3.6.1.4.1.20044.43.6.3.66 | Nodepm1004vencCtrllineLoop | |||
| 1.3.6.1.4.1.20044.43.6.3.66.1 | Scalarpm1004vencCtrlLineLoop | read-write | deprecated | PM Line Loop Mode :This OID, when set at '1' puts the module in line loopback mode, looping the received 10 Gb/s signal on the transmit 10 Gb/s output. The Ups… |
| 1.3.6.1.4.1.20044.43.6.3.73 | Nodepm1004vencCtrlProtMgnt | |||
| 1.3.6.1.4.1.20044.43.6.3.73.1 | Scalarpm1004vencCtrlLineNumber | read-write | current | Active Line Number : This OID sets the active line number |
| 1.3.6.1.4.1.20044.43.6.3.73.2 | Scalarpm1004vencCtrlProtMode | read-write | current | Line Switch Mode (Auto Or Manual) :This bit selects the manual (1) or automatic (0) switch method <Help> This control defines the protection switch mode on the… |
| 1.3.6.1.4.1.20044.43.6.3.74 | Tablepm1004vencCtrllineOosModeTable | not-accessible | current | List of pm1004vencCtrllineOosMode Article |
| 1.3.6.1.4.1.20044.43.6.3.74.1 | Rowpm1004vencCtrllineOosModeEntry | not-accessible | current | Row definition for the pm1004vencCtrllineOosMode table |
| 1.3.6.1.4.1.20044.43.6.3.74.1.1 | Columnpm1004vencCtrllineOosModeIndex | read-only | current | Index definition for the pm1004vencCtrllineOosMode table |
| 1.3.6.1.4.1.20044.43.6.3.74.1.2 | Columnpm1004vencCtrllineOosModePortn | read-write | current | Line Out Of Service (!Laser OFF!) :This OID sets the line port Out Of Service <Help> This control defines the service state of the line port |
| 1.3.6.1.4.1.20044.43.6.3.198 | Tablepm1004vencCtrldccEnableTable | not-accessible | current | List of pm1004vencCtrldccEnable Article |
| 1.3.6.1.4.1.20044.43.6.3.198.1 | Rowpm1004vencCtrldccEnableEntry | not-accessible | current | Row definition for the pm1004vencCtrldccEnable table |
| 1.3.6.1.4.1.20044.43.6.3.198.1.1 | Columnpm1004vencCtrldccEnableIndex | read-only | current | Index definition for the pm1004vencCtrldccEnable table |
| 1.3.6.1.4.1.20044.43.6.3.198.1.2 | Columnpm1004vencCtrldccEnablePortn | read-write | current | DCC Enable : This OID enables the DCC mode on the PM <Help> This control enables the DCC mode on the PM |
| 1.3.6.1.4.1.20044.43.6.3.208 | Tablepm1004vencCtrlxfpOnoffTable | not-accessible | current | List of pm1004vencCtrlxfpOnoff Article |
| 1.3.6.1.4.1.20044.43.6.3.208.1 | Rowpm1004vencCtrlxfpOnoffEntry | not-accessible | current | Row definition for the pm1004vencCtrlxfpOnoff table |
| 1.3.6.1.4.1.20044.43.6.3.208.1.1 | Columnpm1004vencCtrlxfpOnoffIndex | read-only | current | Index definition for the pm1004vencCtrlxfpOnoff table |
| 1.3.6.1.4.1.20044.43.6.3.208.1.2 | Columnpm1004vencCtrlxfpOnoffPortn | read-write | current | Line Optical Laser Shutdown :This OID switches off the XFP or the OTX <Help> This control defines the laser state of the line transceiver |
| 1.3.6.1.4.1.20044.43.6.3.209 | Tablepm1004vencCtrlxfpLineLoopTable | not-accessible | current | List of pm1004vencCtrlxfpLineLoop Article |
| 1.3.6.1.4.1.20044.43.6.3.209.1 | Rowpm1004vencCtrlxfpLineLoopEntry | not-accessible | current | Row definition for the pm1004vencCtrlxfpLineLoop table |
| 1.3.6.1.4.1.20044.43.6.3.209.1.1 | Columnpm1004vencCtrlxfpLineLoopIndex | read-only | current | Index definition for the pm1004vencCtrlxfpLineLoop table |
| 1.3.6.1.4.1.20044.43.6.3.209.1.2 | Columnpm1004vencCtrlxfpLineLoopPortn | read-write | current | Line Facility Loopback :This OID operates a Line Facility Loopback, looping line input signal on the line output port. The loop is located on the line transcei… |
| 1.3.6.1.4.1.20044.43.6.3.210 | Tablepm1004vencCtrlxfpXfiLoopTable | not-accessible | current | List of pm1004vencCtrlxfpXfiLoop Article |
| 1.3.6.1.4.1.20044.43.6.3.210.1 | Rowpm1004vencCtrlxfpXfiLoopEntry | not-accessible | current | Row definition for the pm1004vencCtrlxfpXfiLoop table |
| 1.3.6.1.4.1.20044.43.6.3.210.1.1 | Columnpm1004vencCtrlxfpXfiLoopIndex | read-only | current | Index definition for the pm1004vencCtrlxfpXfiLoop table |
| 1.3.6.1.4.1.20044.43.6.3.210.1.2 | Columnpm1004vencCtrlxfpXfiLoopPortn | read-write | current | Line Terminal Loopback :This OID operates a Line Terminal Loopback, looping line input signal on the line output port. The loop is located on all client transc… |
| 1.3.6.1.4.1.20044.43.6.3.212 | Tablepm1004vencCtrllineTunableChannelTable | not-accessible | current | List of pm1004vencCtrllineTunableChannel Article |
| 1.3.6.1.4.1.20044.43.6.3.212.1 | Rowpm1004vencCtrllineTunableChannelEntry | not-accessible | current | Row definition for the pm1004vencCtrllineTunableChannel table |
| 1.3.6.1.4.1.20044.43.6.3.212.1.1 | Columnpm1004vencCtrllineTunableChannelIndex | read-only | current | Index definition for the pm1004vencCtrllineTunableChannel table |
| 1.3.6.1.4.1.20044.43.6.3.212.1.2 | Columnpm1004vencCtrllineTunableChannelPortn | read-write | current | ITU Channel :This OID selects the ITU channel of the Line OTX TLH Laser <Help> This control defines the ITU channel of the Line OTX TLH Laser |
| 1.3.6.1.4.1.20044.43.6.3.213 | Tablepm1004vencCtrllinePhotodiodeModeTable | not-accessible | current | List of pm1004vencCtrllinePhotodiodeMode Article |
| 1.3.6.1.4.1.20044.43.6.3.213.1 | Rowpm1004vencCtrllinePhotodiodeModeEntry | not-accessible | current | Row definition for the pm1004vencCtrllinePhotodiodeMode table |
| 1.3.6.1.4.1.20044.43.6.3.213.1.1 | Columnpm1004vencCtrllinePhotodiodeModeIndex | read-only | current | Index definition for the pm1004vencCtrllinePhotodiodeMode table |
| 1.3.6.1.4.1.20044.43.6.3.213.1.2 | Columnpm1004vencCtrllinePhotodiodeModePortn | read-write | current | OTX TLH Rx Sens. Mode :This OID defines the Rx sensiblity mode of the Line OTX TLH <Help> This control defines the receiver sensibility mode of the Line OTX TL… |
| 1.3.6.1.4.1.20044.43.6.3.214 | Tablepm1004vencCtrllinePhotodiodeValueTable | not-accessible | current | List of pm1004vencCtrllinePhotodiodeValue Article |
| 1.3.6.1.4.1.20044.43.6.3.214.1 | Rowpm1004vencCtrllinePhotodiodeValueEntry | not-accessible | current | Row definition for the pm1004vencCtrllinePhotodiodeValue table |
| 1.3.6.1.4.1.20044.43.6.3.214.1.1 | Columnpm1004vencCtrllinePhotodiodeValueIndex | read-only | current | Index definition for the pm1004vencCtrllinePhotodiodeValue table |
| 1.3.6.1.4.1.20044.43.6.3.214.1.2 | Columnpm1004vencCtrllinePhotodiodeValuePortn | read-write | current | OTX TLH Rx Sensibility :This OID sets the Rx sensibility of the Line OTX TLH (custom mode only) <Help> This control defines the receiver sensibility value (onl… |
| 1.3.6.1.4.1.20044.43.6.3.215 | Tablepm1004vencCtrllinePowerLaserTable | not-accessible | current | List of pm1004vencCtrllinePowerLaser Article |
| 1.3.6.1.4.1.20044.43.6.3.215.1 | Rowpm1004vencCtrllinePowerLaserEntry | not-accessible | current | Row definition for the pm1004vencCtrllinePowerLaser table |
| 1.3.6.1.4.1.20044.43.6.3.215.1.1 | Columnpm1004vencCtrllinePowerLaserIndex | read-only | current | Index definition for the pm1004vencCtrllinePowerLaser table |
| 1.3.6.1.4.1.20044.43.6.3.215.1.2 | Columnpm1004vencCtrllinePowerLaserPortn | read-write | current | Line Laser Output Power [3-5] :This OID sets the output power value on the laser of the Line OTX TLH (AV=Power*10+158) (Unit = dBm) <Help> This control defines… |
| 1.3.6.1.4.1.20044.43.7 | Nodepm1004vencri | |||
| 1.3.6.1.4.1.20044.43.7.1 | Nodepm1004vencriTable | |||
| 1.3.6.1.4.1.20044.43.7.1.1 | Tablepm1004vencRinvClientTable | not-accessible | current | List of the video clients on the selected module |
| 1.3.6.1.4.1.20044.43.7.1.1.1 | Rowpm1004vencRinvClientEntry | not-accessible | current | Row definition for the video client table |
| 1.3.6.1.4.1.20044.43.7.1.1.1.1 | Columnpm1004vencRinvClientIndex | read-only | current | Index for video client table |
| 1.3.6.1.4.1.20044.43.7.1.1.1.2 | Columnpm1004vencRinvClient | read-only | current | Inventory for the video client: This OID contains the inventory for the video client |
| 1.3.6.1.4.1.20044.43.7.1.2 | Tablepm1004vencRinvLineTable | not-accessible | current | List of the XFPs on the selected module |
| 1.3.6.1.4.1.20044.43.7.1.2.1 | Rowpm1004vencRinvLineEntry | not-accessible | current | Row definition for the XFP table |
| 1.3.6.1.4.1.20044.43.7.1.2.1.1 | Columnpm1004vencRinvLineIndex | read-only | current | Index for XFP table |
| 1.3.6.1.4.1.20044.43.7.1.2.1.2 | Columnpm1004vencRinvxfpLine | read-only | current | Inventory for the XFP: This OID contains the inventory for the XFP |
| 1.3.6.1.4.1.20044.43.7.2 | Scalarpm1004vencRinvReloadInventory | read-write | current | Reload the inventory: This OID triggers an inventory reload. |
| 1.3.6.1.4.1.20044.43.7.3 | Scalarpm1004vencRinvHwPlatform | read-only | current | HW platform description: This OID contains the description of the Hardware platform. |
| 1.3.6.1.4.1.20044.43.7.4 | Scalarpm1004vencRinvModulePlatform | read-only | current | Module platform description: This OID contains the description of the Module. |
| 1.3.6.1.4.1.20044.43.7.5 | Scalarpm1004vencRinvSwPlatform | read-only | current | SW platform description: This OID contains the description of the Software platform. |
| 1.3.6.1.4.1.20044.43.7.6 | Scalarpm1004vencRinvGwPlatform | read-only | current | GW platform desciption: This OID contains the description of the Gateware platform. |
| 1.3.6.1.4.1.20044.43.8 | Nodepm1004vencdownload | |||
| 1.3.6.1.4.1.20044.43.8.1 | Nodepm1004vencDwlOther | |||
| 1.3.6.1.4.1.20044.43.8.1.0 | Nodepm1004vencDwlrestartProcess | |||
| 1.3.6.1.4.1.20044.43.8.1.0.1 | Scalarpm1004vencDwlWarmRestartProcessed | read-only | current | Warm Restart :This OID indicates that the module last restart was a Warm RESTART |
| 1.3.6.1.4.1.20044.43.8.1.0.2 | Scalarpm1004vencDwlColdRestartProcessed | read-only | current | Cold Restart :This OID indicates that the module last restart was a Cold RESTART |
| 1.3.6.1.4.1.20044.43.8.1.1 | Nodepm1004vencDwlswBanksUsed | |||
| 1.3.6.1.4.1.20044.43.8.1.1.1 | Scalarpm1004vencDwlSwBank1Used | read-only | current | SW bank 1 active :This OID indicates the module is working on SW bank 1 <Help> This status indicates if the SW bank 1 is active or standby |
| 1.3.6.1.4.1.20044.43.8.1.1.2 | Scalarpm1004vencDwlSwBank2Used | read-only | current | SW bank 2 active :This OID indicates the module is working on SW bank 2 <Help> This status indicates if the SW bank 2 is active or standby |
| 1.3.6.1.4.1.20044.43.8.1.1.5 | Scalarpm1004vencDwlSwBank1Notempty | read-only | current | SW bank 1 loaded :This OID indicates a software is loaded in SW bank 1 <Help> This status indicates if the SW bank 1 contains SW package |
| 1.3.6.1.4.1.20044.43.8.1.1.6 | Scalarpm1004vencDwlSwBank2Notempty | read-only | current | SW bank 2 loaded :This OID indicates a software is loaded in SW bank 2 <Help> This status indicates if the SW bank 2 contains SW package |
| 1.3.6.1.4.1.20044.43.8.1.2 | Nodepm1004vencDwlgwBanksUsed | |||
| 1.3.6.1.4.1.20044.43.8.1.2.1 | Scalarpm1004vencDwlGwBank1Used | read-only | current | GW bank 1 active :This OID indicates the module is working on GW bank 1 <Help> This status indicates if the GW bank 1 is active or standby |
| 1.3.6.1.4.1.20044.43.8.1.2.2 | Scalarpm1004vencDwlGwBank2Used | read-only | current | GW bank 2 active :This OID indicates the module is working on GW bank 2 |
| 1.3.6.1.4.1.20044.43.8.1.2.3 | Scalarpm1004vencDwlGwBank3Used | read-only | current | GW bank 3 active :This OID indicates the module is working on GW bank 3 <Help> This status indicates if the GW bank 3 is active or standby |
| 1.3.6.1.4.1.20044.43.8.1.2.4 | Scalarpm1004vencDwlGwBank4Used | read-only | current | GW bank 4 active :This OID indicates the module is working on GW bank 4 |
| 1.3.6.1.4.1.20044.43.8.1.2.5 | Scalarpm1004vencDwlGwBank1Notempty | read-only | current | GW bank 1 loaded :This OID indicates a gateware is loaded in GW bank 1 <Help> This status indicates if the GW bank 1 contains GW package |
| 1.3.6.1.4.1.20044.43.8.1.2.6 | Scalarpm1004vencDwlGwBank2Notempty | read-only | current | GW bank 2 loaded :This OID indicates a gateware is loaded in GW bank 2 |
| 1.3.6.1.4.1.20044.43.8.1.2.7 | Scalarpm1004vencDwlGwBank3Notempty | read-only | current | GW bank 3 loaded :This OID indicates a gateware is loaded in GW bank 3 <Help> This status indicates if the GW bank 3 contains GW package |
| 1.3.6.1.4.1.20044.43.8.1.2.8 | Scalarpm1004vencDwlGwBank4Notempty | read-only | current | GW bank 4 loaded :This OID indicates a gateware is loaded in GW bank 4 |
| 1.3.6.1.4.1.20044.43.8.2 | Nodepm1004vencDwlClient | |||
| 1.3.6.1.4.1.20044.43.8.3 | Nodepm1004vencDwlLine | |||
| 1.3.6.1.4.1.20044.43.9 | Nodepm1004vencConfig | |||
| 1.3.6.1.4.1.20044.43.9.1 | Nodepm1004vencCfgAccessCAisCsf | |||
| 1.3.6.1.4.1.20044.43.9.1.1 | Tablepm1004vencCfgClientcaiscsfTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.43.9.1.1.1 | Rowpm1004vencCfgClientcaiscsfEntry | not-accessible | current | Row definition for the accessCAisCsf table |
| 1.3.6.1.4.1.20044.43.9.1.1.1.1 | Columnpm1004vencCfgClientcaiscsfIndex | read-only | current | Index definition for the clientcaiscsf table |
| 1.3.6.1.4.1.20044.43.9.1.1.1.3 | Columnpm1004vencCfgCAisModePortn | read-write | current | CAIS mode on Client Port :This register enables/disables port laser shutdown on CAIS insertion condition |
| 1.3.6.1.4.1.20044.43.9.1.1.1.9 | Columnpm1004vencCfgUpAccessioAlmPortn | read-write | current | CSF contributors on Client Port :This register configures the contributors to upstream CSF insertion on the port. |
| 1.3.6.1.4.1.20044.43.9.1.1.1.10 | Columnpm1004vencCfgUpMapperDeAlmPortn | read-write | current | CSF contributors on Client Port :This register configures the contributors to upstream CSF insertion on the port. |
| 1.3.6.1.4.1.20044.43.9.1.1.1.17 | Columnpm1004vencCfgDownAccessioAlmPortn | read-write | current | CAIS contributors on Client Port :This register configures the contributors to downstream CAIS insertion on port. |
| 1.3.6.1.4.1.20044.43.9.1.1.1.18 | Columnpm1004vencCfgDownMapperDeAlmPortn | read-write | current | CAIS contributors on Client Port :This register configures the contributors to downstream CAIS insertion on port. |
| 1.3.6.1.4.1.20044.43.9.1.1.1.19 | Columnpm1004vencCfgDownDfrmAlmPortn | read-write | current | CAIS contributors on Client Port :This register configures the contributors to downstream CAIS insertion on port. |
| 1.3.6.1.4.1.20044.43.9.1.1.1.20 | Columnpm1004vencCfgDownLineSyncAlarmsPortn | read-write | deprecated | CAIS contributors on Client Port :This register configures the contributors to downstream CAIS insertion on port. |
| 1.3.6.1.4.1.20044.43.9.2 | Nodepm1004vencCfgStartup | |||
| 1.3.6.1.4.1.20044.43.9.2.1 | Tablepm1004vencCfgClientStartupTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.43.9.2.1.1 | Rowpm1004vencCfgClientStartupEntry | not-accessible | current | Row definition for the startup table |
| 1.3.6.1.4.1.20044.43.9.2.1.1.1 | Columnpm1004vencCfgClientStartupIndex | read-only | current | Index definition for the clientStartup table |
| 1.3.6.1.4.1.20044.43.9.2.1.1.3 | Columnpm1004vencCfgSystConfPortPortn | read-write | current | Default Settings on Client Port :This register configures the default initialisation settings on the port. |
| 1.3.6.1.4.1.20044.43.9.2.1.1.4 | Columnpm1004vencCfgNetConfPortPortn | read-write | current | Default Protocol on Client Port :This register configures the default initialisation protocol on the port. |
| 1.3.6.1.4.1.20044.43.9.2.1.1.5 | Columnpm1004vencCfgAdddropConfPortPortn | read-write | deprecated | Default Add&Drop mode on Client Port :This register configures the default Add&Drop mode on the port. |
| 1.3.6.1.4.1.20044.43.9.2.2 | Nodepm1004venctablelineStartup | |||
| 1.3.6.1.4.1.20044.43.9.2.2.2 | Scalarpm1004vencCfgsystConfLine1 | read-write | current | Default Settings on Line 1 :This register configures the default initialisation settings on Line port 1. |
| 1.3.6.1.4.1.20044.43.9.2.2.5 | Scalarpm1004vencCfglineOptions1 | read-write | current | Default Options on Active Line Port :This register configures the default options on the active line port |
| 1.3.6.1.4.1.20044.43.9.2.2.6 | Scalarpm1004vencCfgsystConfLine2 | read-write | current | Default Settings on Line 2 :This register configures the default initialisation settings on Line port 2. |
| 1.3.6.1.4.1.20044.43.9.2.2.7 | Scalarpm1004vencCfglineSelection | read-write | current | Default Settings of active line :This register configures the start up active line. |
| 1.3.6.1.4.1.20044.43.9.2.2.9 | Scalarpm1004vencCfglineOptions2 | read-write | current | Default Options on Active Line Port :This register configures the default options on the active line port |
| 1.3.6.1.4.1.20044.43.9.2.3 | Tablepm1004vencCfgXfpTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.43.9.2.3.1 | Rowpm1004vencCfgXfpEntry | not-accessible | current | Row definition for the startup table |
| 1.3.6.1.4.1.20044.43.9.2.3.1.1 | Columnpm1004vencCfgXfpIndex | read-only | current | Index definition for the xfp table |
| 1.3.6.1.4.1.20044.43.9.2.3.1.3 | Columnpm1004vencCfgSystConfXfpPortn | read-write | current | Default settings on XFP Port :This register configures the default initialisation settings on XFP port. |
| 1.3.6.1.4.1.20044.43.9.2.3.1.4 | Columnpm1004vencCfgDataRateConfXfpPortn | read-write | deprecated | : |
| 1.3.6.1.4.1.20044.43.9.3 | Nodepm1004vencCfgLabels | |||
| 1.3.6.1.4.1.20044.43.9.3.1 | Tablepm1004vencCfgLabelclientTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.43.9.3.1.1 | Rowpm1004vencCfgLabelclientEntry | not-accessible | current | Row definition for the labels table |
| 1.3.6.1.4.1.20044.43.9.3.1.1.1 | Columnpm1004vencCfgLabelclientIndex | read-only | current | Index definition for the labelclient table |
| 1.3.6.1.4.1.20044.43.9.3.1.1.3 | Columnpm1004vencCfgLabelclientPortn | read-write | current | Default settings on the label of the Ports :These registers configures the default initialisation settings of the labels of the ports. |
| 1.3.6.1.4.1.20044.43.9.3.2 | Tablepm1004vencCfgLabellineTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.43.9.3.2.1 | Rowpm1004vencCfgLabellineEntry | not-accessible | current | Row definition for the labels table |
| 1.3.6.1.4.1.20044.43.9.3.2.1.1 | Columnpm1004vencCfgLabellineIndex | read-only | current | Index definition for the labelline table |
| 1.3.6.1.4.1.20044.43.9.3.2.1.3 | Columnpm1004vencCfgLabellinePortn | read-write | current | Default settings on the label of the lines :These registers configures the default initialisation settings of the labels of the lines. |
| 1.3.6.1.4.1.20044.43.9.4 | Nodepm1004vencCfgStartupthresholds | |||
| 1.3.6.1.4.1.20044.43.9.4.1 | Tablepm1004vencCfgClientStartupThreshTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.43.9.4.1.1 | Rowpm1004vencCfgClientStartupThreshEntry | not-accessible | current | Row definition for the startupthresholds table |
| 1.3.6.1.4.1.20044.43.9.4.1.1.1 | Columnpm1004vencCfgClientStartupThreshIndex | read-only | current | Index definition for the clientStartupThresh table |
| 1.3.6.1.4.1.20044.43.9.4.1.1.15 | Columnpm1004vencCfgClientThreshtxpowhighPortn | read-write | current | Default Setting on Tx Power high threshold :This register configures the default initialisation of the high threshold of the Transmit power on the port. |
| 1.3.6.1.4.1.20044.43.9.4.1.1.16 | Columnpm1004vencCfgClientThreshtxpowlowPortn | read-write | current | Default Setting on Tx Power low threshold :This register configures the default initialisation of the low threshold of the Transmit power on the port. |
| 1.3.6.1.4.1.20044.43.9.4.1.1.19 | Columnpm1004vencCfgClientThreshrxpowhighPortn | read-write | current | Default Setting on Rx Power high threshold :This register configures the default initialisation of the high threshold of the received power on the port. |
| 1.3.6.1.4.1.20044.43.9.4.1.1.20 | Columnpm1004vencCfgClientThreshrxpowlowPortn | read-write | current | Default Setting on Rx Power low threshold :This register configures the default initialisation of the low threshold of the received power on the port. |
| 1.3.6.1.4.1.20044.43.9.4.2 | Tablepm1004vencCfgLineStartupThreshTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.43.9.4.2.1 | Rowpm1004vencCfgLineStartupThreshEntry | not-accessible | current | Row definition for the startupthresholds table |
| 1.3.6.1.4.1.20044.43.9.4.2.1.1 | Columnpm1004vencCfgLineStartupThreshIndex | read-only | current | Index definition for the lineStartupThresh table |
| 1.3.6.1.4.1.20044.43.9.4.2.1.15 | Columnpm1004vencCfgLineThreshtxpowhighPortn | read-write | current | Default Setting on Tx Power high threshold :This register configures the default initialisation of the high threshold of the Transmit power on the line. |
| 1.3.6.1.4.1.20044.43.9.4.2.1.16 | Columnpm1004vencCfgLineThreshtxpowlowPortn | read-write | current | Default Setting on Tx Power low threshold :This register configures the default initialisation of the low threshold of the Transmit power on the line. |
| 1.3.6.1.4.1.20044.43.9.4.2.1.19 | Columnpm1004vencCfgLineThreshrxpowhighPortn | read-write | current | Default Setting on Rx Power high threshold :This register configures the default initialisation of the high threshold of the received power on the line. |
| 1.3.6.1.4.1.20044.43.9.4.2.1.20 | Columnpm1004vencCfgLineThreshrxpowlowPortn | read-write | current | Default Setting on Rx Power low threshold :This register configures the default initialisation of the low threshold of the received power on the line. |
| 1.3.6.1.4.1.20044.43.9.5 | Nodepm1004vencCfgOther | |||
| 1.3.6.1.4.1.20044.43.9.5.1 | Nodepm1004venctablemoduleOther | |||
| 1.3.6.1.4.1.20044.43.9.5.1.2 | Scalarpm1004vencCfgmode | read-write | current | Default encryption mode on Module :This register selects the encryption configuration of the PM |
| 1.3.6.1.4.1.20044.43.9.6 | Nodepm1004vencCfgStartuptlh | |||
| 1.3.6.1.4.1.20044.43.9.6.1 | Tablepm1004vencCfgOtxtlhTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.43.9.6.1.1 | Rowpm1004vencCfgOtxtlhEntry | not-accessible | current | Row definition for the startuptlh table |
| 1.3.6.1.4.1.20044.43.9.6.1.1.1 | Columnpm1004vencCfgOtxtlhIndex | read-only | current | Index definition for the otxtlh table |
| 1.3.6.1.4.1.20044.43.9.6.1.1.3 | Columnpm1004vencCfgNuPortn | read-write | deprecated | : |
| 1.3.6.1.4.1.20044.43.9.6.1.1.4 | Columnpm1004vencCfgLineDitherRatePortn | read-write | current | Default Line OTX TLH FM amplitude :This register configures the start-up width of the frequency modulation of the Line OTX TLH |
| 1.3.6.1.4.1.20044.43.9.6.1.1.5 | Columnpm1004vencCfgLineDitherFhzPortn | read-write | current | Default Line OTX TLH FM frequency :This register configures the start-up frequency of the frequency modulation of the Line OTX TLH |
| 1.3.6.1.4.1.20044.43.9.6.1.1.6 | Columnpm1004vencCfgLinePwrLaserPortn | read-write | current | Defaut Line OTX TLH output Power :This register configures the start-up output power of the Line OTX TLH (Unit = dBm) |
| 1.3.6.1.4.1.20044.43.9.6.1.1.7 | Columnpm1004vencCfgLineFCurrentPortn | read-write | current | Default Line OTX TLH Channel :This register configures the start-up laser channel of the Line OTX TLH |
| 1.3.6.1.4.1.20044.43.9.6.1.1.8 | Columnpm1004vencCfgLineGridCurrentPortn | read-write | current | Default Line OTX TLH Grid :This register configures the start-up laser grid of the Line OTX TLH |
| 1.3.6.1.4.1.20044.43.9.6.1.1.9 | Columnpm1004vencCfgFPortn | read-write | current | Default Line OTX TLH lowest Freq :This register configures the start-up lowest frequency supported on the Line OTX TLH |
| 1.3.6.1.4.1.20044.43.9.6.1.1.10 | Columnpm1004vencCfgReservedPortn | read-write | deprecated | : |
| 1.3.6.1.4.1.20044.43.9.6.1.1.11 | Columnpm1004vencCfgLinePhotodiodeModePortn | read-write | current | Default Line OTX TLH APD mode :This register configures the start-up APD mode of the Line OTX TLH |
| 1.3.6.1.4.1.20044.43.9.6.1.1.12 | Columnpm1004vencCfgLinePhotodiodeValuePortn | read-write | current | Default Line OTX TLH APD atten. :This register configures the start-up APD attenuation on the Line OTX TLH |
| 1.3.6.1.4.1.20044.43.9.7 | Nodepm1004vencCfgStartuptablefive | |||
| 1.3.6.1.4.1.20044.43.9.7.1 | Tablepm1004vencCfgOtxtlhcapabilitiesTable | not-accessible | current | List of Article |
| 1.3.6.1.4.1.20044.43.9.7.1.1 | Rowpm1004vencCfgOtxtlhcapabilitiesEntry | not-accessible | current | Row definition for the startuptablefive table |
| 1.3.6.1.4.1.20044.43.9.7.1.1.1 | Columnpm1004vencCfgOtxtlhcapabilitiesIndex | read-only | current | Index definition for the otxtlhcapabilities table |
| 1.3.6.1.4.1.20044.43.9.7.1.1.3 | Columnpm1004vencCfgComponentTypePortn | read-only | current | Component parameters :This OID defines the component parameters |
| 1.3.6.1.4.1.20044.43.9.7.1.1.4 | Columnpm1004vencCfgMiscellaneousPortn | read-only | current | Miscellaneous default settings :This OID defines the miscellaneous parameters |
| 1.3.6.1.4.1.20044.43.9.7.1.1.5 | Columnpm1004vencCfgFirstChannelPortn | read-only | current | Number of the first channel of the component :This OID defines the first channel number of the PM |
| 1.3.6.1.4.1.20044.43.9.7.1.1.6 | Columnpm1004vencCfgLastChannelPortn | read-only | current | Number of the last channel of the component :This OID defines the last channel number of the PM |
| 1.3.6.1.4.1.20044.43.9.7.1.1.7 | Columnpm1004vencCfgGridPortn | read-only | current | Grid value of the component :This OID defines the grid of the PM |
| 1.3.6.1.4.1.20044.43.9.257 | Scalarpm1004vencCfgWriteConfiguration | read-write | current | Write configuration to module:This OID writes the complete configuration to the module |
| 1.3.6.1.4.1.20044.43.10 | Nodepm1004venctraps | |||
| 1.3.6.1.4.1.20044.43.10.2 | Scalarpm1004venctrapPortNumber | read-only | current | Last port which generates a trap |
| 1.3.6.1.4.1.20044.43.10.3 | Scalarpm1004venctrapLineNumber | read-only | current | Last Line which generates a trap |
| 1.3.6.1.4.1.20044.43.10.4 | Scalarpm1004venctrapBoardNumber | read-only | current | Last module which generates a trap |
| 1.3.6.1.4.1.20044.43.10.30 | Notificationpm1004vencLineTrapNotUrgentGoesOn | current | Not urgent Line default is activated | |
| 1.3.6.1.4.1.20044.43.10.31 | Notificationpm1004vencLineTrapNotUrgentGoesOff | current | Not urgent Line default disappeared | |
| 1.3.6.1.4.1.20044.43.10.32 | Notificationpm1004vencLineTrapUrgentGoesOn | current | Urgent Line default is activated | |
| 1.3.6.1.4.1.20044.43.10.33 | Notificationpm1004vencLineTrapUrgentGoesOff | current | Urgent Line default disappeared | |
| 1.3.6.1.4.1.20044.43.10.34 | Notificationpm1004vencLineTrapCritGoesOn | current | Critical Line default is activated | |
| 1.3.6.1.4.1.20044.43.10.35 | Notificationpm1004vencLineTrapCritGoesOff | current | Critical Line default disappeared | |
| 1.3.6.1.4.1.20044.43.10.44 | Notificationpm1004vencClientTrapCritGoesOn | current | Critical client default is activated | |
| 1.3.6.1.4.1.20044.43.10.45 | Notificationpm1004vencClientTrapCritGoesOff | current | Critical client default disappeared | |
| 1.3.6.1.4.1.20044.43.10.50 | Notificationpm1004vencPowerTrapUrgentGoesOn | current | Urgent power supply default is activated | |
| 1.3.6.1.4.1.20044.43.10.51 | Notificationpm1004vencPowerTrapUrgentGoesOff | current | Urgent power supply default disappeared | |
| 1.3.6.1.4.1.20044.43.11 | Nodepm1004vencMonitoring | |||
| 1.3.6.1.4.1.20044.43.11.1 | Nodepm1004vencMonOther | |||
| 1.3.6.1.4.1.20044.43.11.1.3 | Nodepm1004vencMonRmon | |||
| 1.3.6.1.4.1.20044.43.11.1.3.359 | Scalarpm1004vencMonCountersReset | read-write | current | RMON Counters Reset:This OID resets and restarts all the RMON counters |
| 1.3.6.1.4.1.20044.43.11.1.3.360 | Scalarpm1004vencMonCountersStop | read-write | current | RMON Counters stop:This OID stops all the RMON counters |
| 1.3.6.1.4.1.20044.43.11.2 | Nodepm1004vencMonClient | |||
| 1.3.6.1.4.1.20044.43.11.2.4 | Nodepm1004vencMonClientRmonCounter | |||
| 1.3.6.1.4.1.20044.43.11.2.4.16 | Tablepm1004vencMonupRmonByteCntTable | not-accessible | current | List of pm1004vencMonupRmonByteCnt Article |
| 1.3.6.1.4.1.20044.43.11.2.4.16.1 | Rowpm1004vencMonupRmonByteCntEntry | not-accessible | current | Row definition for the pm1004vencMonupRmonByteCnt table |
| 1.3.6.1.4.1.20044.43.11.2.4.16.1.1 | Columnpm1004vencMonupRmonByteCntIndex | read-only | current | Index definition for the pm1004vencMonupRmonByteCnt table |
| 1.3.6.1.4.1.20044.43.11.2.4.16.1.2 | Columnpm1004vencMonupRmonByteCntValuePortn | read-only | current | Client Input Bytes :This counter is increased each time a data byte is received on the client port <Help> This counter gives the number of bytes received on th… |
| 1.3.6.1.4.1.20044.43.11.2.4.16.1.3 | Columnpm1004vencMonupRmonByteCntErrorPortn | read-only | current | Bytes Counter Error :This OID when set indicates the Bytes counter value is invalid on clinet port |
| 1.3.6.1.4.1.20044.43.11.2.4.16.1.4 | Columnpm1004vencMonupRmonByteCntOverloadPortn | read-only | current | Bytes Counter Overload :This OID when set indicates a Bytes counter overload on client port |
| 1.3.6.1.4.1.20044.43.11.2.4.24 | Tablepm1004vencMonupRmonCrcErrorCntTable | not-accessible | current | List of pm1004vencMonupRmonCrcErrorCnt Article |
| 1.3.6.1.4.1.20044.43.11.2.4.24.1 | Rowpm1004vencMonupRmonCrcErrorCntEntry | not-accessible | current | Row definition for the pm1004vencMonupRmonCrcErrorCnt table |
| 1.3.6.1.4.1.20044.43.11.2.4.24.1.1 | Columnpm1004vencMonupRmonCrcErrorCntIndex | read-only | current | Index definition for the pm1004vencMonupRmonCrcErrorCnt table |
| 1.3.6.1.4.1.20044.43.11.2.4.24.1.2 | Columnpm1004vencMonupRmonCrcErrorCntValuePortn | read-only | current | Client Input CRC Errors :This counter is increased each time a CRC error is detected on the client port <Help> This counter gives the number of CRC Errors rece… |
| 1.3.6.1.4.1.20044.43.11.2.4.24.1.3 | Columnpm1004vencMonupRmonCrcErrorCntErrorPortn | read-only | current | CRC Errors Counter Error :This OID when set indicates the CRC Errors counter value is invalid on clinet port |
| 1.3.6.1.4.1.20044.43.11.2.4.24.1.4 | Columnpm1004vencMonupRmonCrcErrorCntOverloadPortn | read-only | current | CRC Errors Counter Overload :This OID when set indicates a CRC Errors counter overload on client port |
| 1.3.6.1.4.1.20044.43.11.2.4.32 | Tablepm1004vencMonupRmonPacketsCntTable | not-accessible | current | List of pm1004vencMonupRmonPacketsCnt Article |
| 1.3.6.1.4.1.20044.43.11.2.4.32.1 | Rowpm1004vencMonupRmonPacketsCntEntry | not-accessible | current | Row definition for the pm1004vencMonupRmonPacketsCnt table |
| 1.3.6.1.4.1.20044.43.11.2.4.32.1.1 | Columnpm1004vencMonupRmonPacketsCntIndex | read-only | current | Index definition for the pm1004vencMonupRmonPacketsCnt table |
| 1.3.6.1.4.1.20044.43.11.2.4.32.1.2 | Columnpm1004vencMonupRmonPacketsCntValuePortn | read-only | current | Client Input Packets :This counter is increased each time a packet is received on the client port <Help> This counter gives the number of packets received on t… |
| 1.3.6.1.4.1.20044.43.11.2.4.32.1.3 | Columnpm1004vencMonupRmonPacketsCntErrorPortn | read-only | current | Packets Counter Error :This OID when set indicates the Packets counter value is invalid on clinet port |
| 1.3.6.1.4.1.20044.43.11.2.4.32.1.4 | Columnpm1004vencMonupRmonPacketsCntOverloadPortn | read-only | current | Packets Counter Overload :This OID when set indicates a Packets counter overload on client port |
| 1.3.6.1.4.1.20044.43.11.2.4.40 | Tablepm1004vencMonupRmonBroadcastCntTable | not-accessible | current | List of pm1004vencMonupRmonBroadcastCnt Article |
| 1.3.6.1.4.1.20044.43.11.2.4.40.1 | Rowpm1004vencMonupRmonBroadcastCntEntry | not-accessible | current | Row definition for the pm1004vencMonupRmonBroadcastCnt table |
| 1.3.6.1.4.1.20044.43.11.2.4.40.1.1 | Columnpm1004vencMonupRmonBroadcastCntIndex | read-only | current | Index definition for the pm1004vencMonupRmonBroadcastCnt table |
| 1.3.6.1.4.1.20044.43.11.2.4.40.1.2 | Columnpm1004vencMonupRmonBroadcastCntValuePortn | read-only | current | Client Input Broadcast Packets :This counter is increased each time a broadcast packet is received on the client port <Help> This counter gives the number of B… |
| 1.3.6.1.4.1.20044.43.11.2.4.40.1.3 | Columnpm1004vencMonupRmonBroadcastCntErrorPortn | read-only | current | Broadcast Counter Error :This OID when set indicates the Broadcast counter value is invalid on clinet port |
| 1.3.6.1.4.1.20044.43.11.2.4.40.1.4 | Columnpm1004vencMonupRmonBroadcastCntOverloadPortn | read-only | current | Broadcast Counter Overload :This OID when set indicates a Broadcast counter overload on client port |
| 1.3.6.1.4.1.20044.43.11.2.4.48 | Tablepm1004vencMonupRmonMulticastCntTable | not-accessible | current | List of pm1004vencMonupRmonMulticastCnt Article |
| 1.3.6.1.4.1.20044.43.11.2.4.48.1 | Rowpm1004vencMonupRmonMulticastCntEntry | not-accessible | current | Row definition for the pm1004vencMonupRmonMulticastCnt table |
| 1.3.6.1.4.1.20044.43.11.2.4.48.1.1 | Columnpm1004vencMonupRmonMulticastCntIndex | read-only | current | Index definition for the pm1004vencMonupRmonMulticastCnt table |
| 1.3.6.1.4.1.20044.43.11.2.4.48.1.2 | Columnpm1004vencMonupRmonMulticastCntValuePortn | read-only | current | Client Input Multicast Packets :This counter is increased each time a Multicast packet is received on the client port <Help> This counter gives the number of M… |
| 1.3.6.1.4.1.20044.43.11.2.4.48.1.3 | Columnpm1004vencMonupRmonMulticastCntErrorPortn | read-only | current | Multicast Counter Error :This OID when set indicates the Multicast counter value is invalid on clinet port |
| 1.3.6.1.4.1.20044.43.11.2.4.48.1.4 | Columnpm1004vencMonupRmonMulticastCntOverloadPortn | read-only | current | Multicast Counter Overload :This OID when set indicates a Multicast counter overload on client port |
| 1.3.6.1.4.1.20044.43.11.2.4.208 | Tablepm1004vencMonupLineRmonByteCntTable | not-accessible | current | List of pm1004vencMonupLineRmonByteCnt Article |
| 1.3.6.1.4.1.20044.43.11.2.4.208.1 | Rowpm1004vencMonupLineRmonByteCntEntry | not-accessible | current | Row definition for the pm1004vencMonupLineRmonByteCnt table |
| 1.3.6.1.4.1.20044.43.11.2.4.208.1.1 | Columnpm1004vencMonupLineRmonByteCntIndex | read-only | current | Index definition for the pm1004vencMonupLineRmonByteCnt table |
| 1.3.6.1.4.1.20044.43.11.2.4.208.1.2 | Columnpm1004vencMonupLineRmonByteCntValuePortn | read-only | current | Line Input Bytes :This counter is increased each time a data byte is received on the Line port <Help> This counter gives the number of bytes received on the Li… |
| 1.3.6.1.4.1.20044.43.11.2.4.208.1.3 | Columnpm1004vencMonupLineRmonByteCntErrorPortn | read-only | current | Bytes Counter Error :This OID when set indicates the Bytes counter value is invalid on line port |
| 1.3.6.1.4.1.20044.43.11.2.4.208.1.4 | Columnpm1004vencMonupLineRmonByteCntOverloadPortn | read-only | current | Bytes Counter Overload :This OID when set indicates a Bytes counter overload on line port |
| 1.3.6.1.4.1.20044.43.11.2.4.209 | Tablepm1004vencMonupLineRmonCrcErrorCntTable | not-accessible | current | List of pm1004vencMonupLineRmonCrcErrorCnt Article |
| 1.3.6.1.4.1.20044.43.11.2.4.209.1 | Rowpm1004vencMonupLineRmonCrcErrorCntEntry | not-accessible | current | Row definition for the pm1004vencMonupLineRmonCrcErrorCnt table |
| 1.3.6.1.4.1.20044.43.11.2.4.209.1.1 | Columnpm1004vencMonupLineRmonCrcErrorCntIndex | read-only | current | Index definition for the pm1004vencMonupLineRmonCrcErrorCnt table |
| 1.3.6.1.4.1.20044.43.11.2.4.209.1.2 | Columnpm1004vencMonupLineRmonCrcErrorCntValuePortn | read-only | current | Line Input CRC Errors :This counter is increased each time a CRC error is detected on the Line port <Help> This counter gives the number of CRC Errors received… |
| 1.3.6.1.4.1.20044.43.11.2.4.209.1.3 | Columnpm1004vencMonupLineRmonCrcErrorCntErrorPortn | read-only | current | CRC Errors Counter Error :This OID when set indicates the CRC Errors counter value is invalid on line port |
| 1.3.6.1.4.1.20044.43.11.2.4.209.1.4 | Columnpm1004vencMonupLineRmonCrcErrorCntOverloadPortn | read-only | current | CRC Errors Counter Overload :This OID when set indicates a CRC Errors counter overload on line port |
| 1.3.6.1.4.1.20044.43.11.2.4.210 | Tablepm1004vencMonupLineRmonPacketsCntTable | not-accessible | current | List of pm1004vencMonupLineRmonPacketsCnt Article |
| 1.3.6.1.4.1.20044.43.11.2.4.210.1 | Rowpm1004vencMonupLineRmonPacketsCntEntry | not-accessible | current | Row definition for the pm1004vencMonupLineRmonPacketsCnt table |
| 1.3.6.1.4.1.20044.43.11.2.4.210.1.1 | Columnpm1004vencMonupLineRmonPacketsCntIndex | read-only | current | Index definition for the pm1004vencMonupLineRmonPacketsCnt table |
| 1.3.6.1.4.1.20044.43.11.2.4.210.1.2 | Columnpm1004vencMonupLineRmonPacketsCntValuePortn | read-only | current | Line Input Packets :This counter is increased each time a packet is received on the Line port <Help> This counter gives the number of packets received on the L… |
| 1.3.6.1.4.1.20044.43.11.2.4.210.1.3 | Columnpm1004vencMonupLineRmonPacketsCntErrorPortn | read-only | current | Packets Counter Error :This OID when set indicates the Packets counter value is invalid on client port |
| 1.3.6.1.4.1.20044.43.11.2.4.210.1.4 | Columnpm1004vencMonupLineRmonPacketsCntOverloadPortn | read-only | current | Packets Counter Overload :This OID when set indicates a Packets counter overload on line port |
| 1.3.6.1.4.1.20044.43.11.3 | Nodepm1004vencMonLine | |||
| 1.3.6.1.4.1.20044.43.11.3.4 | Nodepm1004vencMonLineRmonCounter |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Pm1004vencAdjustValue | INTEGER { otxadjustvalue0(0), otxadjustvalue1(1), otxadjustvalue2(2), otxadjustvalue3(3), otxadjustvalue4(4), otxadjustvalue5(5), otxadjustvalue6(6), otxadjustvalue7(7), otxadjustvalue8(8), otxadjustvalue9(9), otxadjustvalue10(10), } | current | Different values in Adjust mode on OTX-TLH on line ports |
| Pm1004vencClientOosMode | INTEGER { clientportis(0), clienttxoos(1), clientrxoos(2), clientportoos(3) } | current | Mode for OOS on client ports |
| Pm1004vencDccMode | INTEGER { dccNo(0), dcctermLine1(1), dcctermLine2(2), dcctermLines12(3), dccmaster(4), dccslaveLine12(7) } | current | Mode for DCC |
| Pm1004vencKeyMode | INTEGER { key1(0), key2(1) } | current | Mode for encryption key |
| Pm1004vencModeAddDrop | INTEGER { singleSplitSelect(256) } | current | different mode for client |
| Pm1004vencModeTimeSlot | INTEGER { singleSplitSelect(256) } | current | different mode for time slot |
| Pm1004vencOtxChannel | INTEGER { } | current | Channel selection on OTX-TLH on line ports |
| Pm1004vencOtxGrid | INTEGER { otxgrid200(200), otxgrid100(100), otxgrid50(50), } | current | Different grids on OTX-TLH on line ports |
| Pm1004vencOtxMode | INTEGER { otx80mode(1), otx60mode(2), otxadjustmode(4), } | current | Different modes on OTX-TLH on line ports |
| Pm1004vencProtectionStartUp | INTEGER { auto(2), manualX2Line2(0), manualX1Line1(1) } | current | protection for startup |
| Pm1004vencProtectionTimeSlot | INTEGER { auto(0), manualX2Line2(257), manualX1Line1(513) } | current | protection for control |